Update CUra desc and add gcodes per slicer

wiki/Slicers.md

@@ -1,8 +1,56 @@
+1. [Slicer Software](#slicer-software)
+2. [Slicer GCODEs](#slicer-gcodes)
+
+## Slicer Software
+
 | Name | Multitool | Issue | Discussion | Notes |
 |:------:|:------:|:------:|:------:|------|
-| Cura | <span style="color: green;">✓</span> | | | Setup Custom FDM printer, do not use Voron 2.4 as you can not add extruders |
+| Cura | <span style="color: green;">✓</span> | | | As of 5.8, select new printer, select DraftShift Design, select the size from the voron listi, allwos up to 8 extruders |
 | OrcaSlicer | <span style="color: red;">✗</span> | [2050](https://github.com/SoftFever/OrcaSlicer/issues/2050) | [931](https://github.com/SoftFever/OrcaSlicer/discussions/931) | Upvote the Issue to get support added, beta support [6087](https://github.com/SoftFever/OrcaSlicer/pull/6087) |
 | PrusaSlicer | <span style="color: green;">✓</span> | | | |
 | Simplify3D | <span style="color: silver;">?</span> | | | |
 | Slic3r | <span style="color: silver;">?</span> | | | |
 | SuperSlicer | <span style="color: green;">✓</span> | | | See [2197](https://github.com/supermerill/SuperSlicer/issues/2197) |
+
+## Slicer GCODEs
+
+### Prusa
+
+**Start GCODE** - all must be a single line
+```
+PRINT_START TOOL_TEMP={first_layer_temperature[initial_tool]} {if is_extruder_used[0]}T0_TEMP={first_layer_temperature[0]}{endif} {if is_extruder_used[1]}T1_TEMP={first_layer_temperature[1]}{endif} {if is_extruder_used[2]}T2_TEMP={first_layer_temperature[2]}{endif} {if is_extruder_used[3]}T3_TEMP={first_layer_temperature[3]}{endif} {if is_extruder_used[4]}T4_TEMP={first_layer_temperature[4]}{endif} {if is_extruder_used[5]}T5_TEMP={first_layer_temperature[5]}{endif}  BED_TEMP=[first_layer_bed_temperature] TOOL=[initial_tool]
+```
+
+**Tool change GCODE**
+```
+M104 S{temperature[next_extruder]} T[next_extruder] ; set new tool temperature so it can start heating while changing
+```
+
+### Orca
+
+**Start GCODE** - all must be a single line
+```
+PRINT_START TOOL_TEMP={first_layer_temperature[initial_tool]} {if is_extruder_used[0]}T0_TEMP={first_layer_temperature[0]}{endif} {if is_extruder_used[1]}T1_TEMP={first_layer_temperature[1]}{endif} {if is_extruder_used[2]}T2_TEMP={first_layer_temperature[2]}{endif} {if is_extruder_used[3]}T3_TEMP={first_layer_temperature[3]}{endif} {if is_extruder_used[4]}T4_TEMP={first_layer_temperature[4]}{endif} {if is_extruder_used[5]}T5_TEMP={first_layer_temperature[5]}{endif}  BED_TEMP=[first_layer_bed_temperature] TOOL=[initial_tool]
+```
+
+**Tool change GCODE**
+```
+;Leave blank
+```
+
+### Cura
+
+**Start GCODE** - all must be a single line
+```
+PRINT_START TOOL_TEMP={material_print_temperature_layer_0} T{initial_extruder_nr}_TEMP={material_print_temperature_layer_0} BED_TEMP={material_bed_temperature_layer_0} TOOL={initial_extruder_nr}
+```
+
+**Tool change GCODE**
+```
+;Leave blank
+```
+
+**Pre tool change GCODE** (as of 5.9)
+```
+M104 S{material_print_temperature} T{extruder_nr}
+```