EzPPPwn v1.20

Supported versions are:

• FW 7.00 / 7.01 / 7.02
• FW 7.50 / 7.51 / 7.55
• FW 8.00 / 8.01 / 8.03
• FW 8.50 / 8.52
• FW 9.00
• FW 9.03 / 9.04
• FW 9.50 / 9.51 / 9.60
• FW 10.00 / 10.01
• FW 10.50 / 10.70 / 10.71
• FW 11.00 more can be added (PRs are welcome)

Requirements

- A computer with an Ethernet port  USB adapter also works.
- Ethernet cable.
- .Net 8.0.
- Npcap.

FormConfig (Config PPPwn) :

FormPPPwn (Exploit):

• Add Update Button.
• Restyle Form.

FormUpdate

If you don't have requirements it could help you to install it (Npcap, PPPwn C++, stage1.bin (Embedded resource)):

• If you don't accept installation, Application will close.

FormRequired (Install requirements) :

• If you canceled installation, Application will close.

Usage

On your PS4:

• Go to Settings and then Network
• Select Set Up Internet connection and choose Use a LAN Cable
• Choose Custom setup and choose PPPoE for IP Address Settings
• Enter anything for PPPoE User ID and PPPoE Password
• Choose Automatic for DNS Settings and MTU Settings
• Choose Do Not Use for Proxy Server
• Click Test Internet Connection to communicate with your computer

If the exploit fails or the PS4 crashes, you can skip the internet setup and simply click on Test Internet Connection. If the pppwn.exe is stuck waiting for a request/response, cancel it and run it again on your computer, and then click on Test Internet Connection on your PS4.

If the exploit works, you should see an output similar to below, and you should see Cannot connect to network. followed by PPPwned printed on your PS4.

Example run