This utility provides a interface for handling CALLTO links and forwarding them to Yealink SIP Phones.
Manual dialing of a number is also possible. (This is NOT a SoftPhone)
Download the latest version from Releases.
https://github.com/DJFPaul/yealink_dialer/releases
Unzip folder to a directory of choice.
It is recommended not to use a directory that requires admin write permissions.
If you choose such, you will need to launch the utility as admin when ever you change settings.
To register the application for the first time, run register.bat.
This will setup all necessary registry entries to handle the callto links
If you ever move the folder, run this again to update the paths.
After running register.bat, Yealink Dialer should open it self.
When launching for the first time, the settings menu should automatically open.
If not then you can find them at the bottom right of the call window.
Change these settings to reflect the correct settings of your Yealink device.
Phone IP Specify the IP of the YeaLink Phone that the calls should be dialed with.
Sip Account Specify the SIP account the call should be made with. The format is USERNAME@SIPSERVERIP
Sip Username The username used to login to your Yealink phone's web interface.
Sip Password The password used to login to your Yealink phone's web interface.
Autoclose When launched trough a callto link, the dial window will auto close after the set time.
Autodial Checking this box will automatically initiate the call after a set delay, when launched by a callto link.
For this utility to work, you need to configure the Action URI Allow IP List
You can either specify your PC IP and limit it to just you, or use a wildcard in the IP field.
After this step is done, you can hit the test button.
It will ask you to confirm the test and will try to make a call to 012345767890 once you do.
The first time you do this, or when ever you change these settings, your Yealink Phone will ask you for permission.
Look at your phones screen and confirm that you want to allow remote access.
If you do not see any message on your Yealink Device, and it does not dial anything, check your settings again.
If everything is setup correctly, you should now be able to use callto: tel: sip: and phone: links or you can initiate a call by using the manual dial.
Hit save and try it out.