Merge pull request #1321 from NickeZ/nickez/disable-jlink-gui

Makefile: Disable jlink gui in shortcuts

Makefile

@@ -106,23 +106,23 @@ run-valgrind-on-unit-tests:
 flash-dev-firmware:
 	./py/load_firmware.py build/bin/firmware.bin --debug
 jlink-flash-bootloader-development: | build
-	JLinkExe -if SWD -device ATSAMD51J20 -speed 4000 -autoconnect 1 -CommanderScript ./build/scripts/bootloader-development.jlink
+	JLinkExe -NoGui 1 -if SWD -device ATSAMD51J20 -speed 4000 -autoconnect 1 -CommanderScript ./build/scripts/bootloader-development.jlink
 jlink-flash-bootloader-development-locked: | build
-	JLinkExe -if SWD -device ATSAMD51J20 -speed 4000 -autoconnect 1 -CommanderScript ./build/scripts/bootloader-development-locked.jlink
+	JLinkExe -NoGui 1 -if SWD -device ATSAMD51J20 -speed 4000 -autoconnect 1 -CommanderScript ./build/scripts/bootloader-development-locked.jlink
 jlink-flash-bootloader: | build
-	JLinkExe -if SWD -device ATSAMD51J20 -speed 4000 -autoconnect 1 -CommanderScript ./build/scripts/bootloader.jlink
+	JLinkExe -NoGui 1 -if SWD -device ATSAMD51J20 -speed 4000 -autoconnect 1 -CommanderScript ./build/scripts/bootloader.jlink
 jlink-flash-bootloader-btc-development: | build
-	JLinkExe -if SWD -device ATSAMD51J20 -speed 4000 -autoconnect 1 -CommanderScript ./build/scripts/bootloader-btc-development.jlink
+	JLinkExe -NoGui 1 -if SWD -device ATSAMD51J20 -speed 4000 -autoconnect 1 -CommanderScript ./build/scripts/bootloader-btc-development.jlink
 jlink-flash-bootloader-btc: | build
-	JLinkExe -if SWD -device ATSAMD51J20 -speed 4000 -autoconnect 1 -CommanderScript ./build/scripts/bootloader-btc.jlink
+	JLinkExe -NoGui 1 -if SWD -device ATSAMD51J20 -speed 4000 -autoconnect 1 -CommanderScript ./build/scripts/bootloader-btc.jlink
 jlink-flash-firmware: | build
-	JLinkExe -if SWD -device ATSAMD51J20 -speed 4000 -autoconnect 1 -CommanderScript ./build/scripts/firmware.jlink
+	JLinkExe -NoGui 1 -if SWD -device ATSAMD51J20 -speed 4000 -autoconnect 1 -CommanderScript ./build/scripts/firmware.jlink
 jlink-flash-firmware-btc: | build
-	JLinkExe -if SWD -device ATSAMD51J20 -speed 4000 -autoconnect 1 -CommanderScript ./build/scripts/firmware-btc.jlink
+	JLinkExe -NoGui 1 -if SWD -device ATSAMD51J20 -speed 4000 -autoconnect 1 -CommanderScript ./build/scripts/firmware-btc.jlink
 jlink-flash-factory-setup: | build
-	JLinkExe -if SWD -device ATSAMD51J20 -speed 4000 -autoconnect 1 -CommanderScript ./build/scripts/factory-setup.jlink
+	JLinkExe -NoGui 1 -if SWD -device ATSAMD51J20 -speed 4000 -autoconnect 1 -CommanderScript ./build/scripts/factory-setup.jlink
 jlink-flash-firmware-debug: | build
-	JLinkExe -if SWD -device ATSAMD51J20 -speed 4000 -autoconnect 1 -CommanderScript ./build-debug/scripts/firmware.jlink
+	JLinkExe -NoGui 1 -if SWD -device ATSAMD51J20 -speed 4000 -autoconnect 1 -CommanderScript ./build-debug/scripts/firmware.jlink
 jlink-gdb-server:
 	JLinkGDBServer -nogui -if SWD -device ATSAMD51J20 -speed 4000
 rtt-client: