Skip to content

Commit

Permalink
Add clarification about not connected top infill in prusaslicer (#118)
Browse files Browse the repository at this point in the history
Add clarification about "not connected top infill" in prusaslicer. Turns out, it is supported after all. It's called "Monotonic lines"
  • Loading branch information
vicwomg authored Jul 5, 2024
1 parent df2e718 commit eb4d914
Showing 1 changed file with 1 addition and 1 deletion.
Original file line number Diff line number Diff line change
Expand Up @@ -50,7 +50,7 @@ But, there are some things that *may* help a bit:

### "Not Connected" Top Infill (SuperSlicer)
I find that setting top infill to "not connected" makes a noticeable improvement.\
This is default behavior in Cura, and is not available in Prusa Slicer.
This is default behavior in Cura. In Prusa Slicer, it can be configured by setting the "Top fill pattern" to "Monotonic lines".

- [![](./images/small_infill_overextruded/not_connected_setting.png)](./images/small_infill_overextruded/not_connected_setting.png){:target="_blank"}
- :warning: This setting overshoots perimeters more than "connected" does. If you have raised your infill/perimeters encroachment (overlap), **consider setting it back to default** (for now. You can fine-tune later).
Expand Down

0 comments on commit eb4d914

Please sign in to comment.