Initial 418 Dual

Allted · Jan 24, 2020 · dcc929e · dcc929e
1 parent 0228635
commit dcc929e
Show file tree

Hide file tree

Showing 3 changed files with 14 additions and 14 deletions.
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
@@ -71,7 +71,7 @@
 // @section info
 
 // Author info of this build printed to the host during boot and M115
-#define STRING_CONFIG_H_AUTHOR "(V1 Engineering, Ryan, 418)" // Who made the changes.
+#define STRING_CONFIG_H_AUTHOR "(V1 Engineering, Ryan, 418D)" // Who made the changes.
 //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
 
 /**
@@ -609,9 +609,9 @@
 #define USE_XMIN_PLUG
 #define USE_YMIN_PLUG
 #define USE_ZMIN_PLUG
-//#define USE_XMAX_PLUG
-//#define USE_YMAX_PLUG
-//#define USE_ZMAX_PLUG
+#define USE_XMAX_PLUG
+#define USE_YMAX_PLUG
+#define USE_ZMAX_PLUG
 
 // Enable pullup for all endstops to prevent a floating state
 #define ENDSTOPPULLUPS
@@ -640,8 +640,8 @@
 #endif
 
 // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
-#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
-#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
+#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
 #define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
 #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
 #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
@@ -1084,11 +1084,11 @@
  */
 
 // Min software endstops constrain movement within minimum coordinate bounds
-//#define MIN_SOFTWARE_ENDSTOPS
+#define MIN_SOFTWARE_ENDSTOPS
 #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
   #define MIN_SOFTWARE_ENDSTOP_X
   #define MIN_SOFTWARE_ENDSTOP_Y
-  #define MIN_SOFTWARE_ENDSTOP_Z
+  //#define MIN_SOFTWARE_ENDSTOP_Z
 #endif
 
 // Max software endstops constrain movement within maximum coordinate bounds
@@ -1710,7 +1710,7 @@
 //
 // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
 //
-//#define INDIVIDUAL_AXIS_HOMING_MENU
+#define INDIVIDUAL_AXIS_HOMING_MENU
 
 //
 // SPEAKER/BUZZER

diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
@@ -473,20 +473,20 @@
  * in X2. Dual endstop offsets can be set at runtime with 'M666 X<offset> Y<offset> Z<offset>'.
  */
 
-//#define X_DUAL_STEPPER_DRIVERS
+#define X_DUAL_STEPPER_DRIVERS
 #if ENABLED(X_DUAL_STEPPER_DRIVERS)
   #define INVERT_X2_VS_X_DIR true   // Set 'true' if X motors should rotate in opposite directions
-  //#define X_DUAL_ENDSTOPS
+  #define X_DUAL_ENDSTOPS
   #if ENABLED(X_DUAL_ENDSTOPS)
     #define X2_USE_ENDSTOP _XMAX_
     #define X2_ENDSTOP_ADJUSTMENT  0
   #endif
 #endif
 
-//#define Y_DUAL_STEPPER_DRIVERS
+#define Y_DUAL_STEPPER_DRIVERS
 #if ENABLED(Y_DUAL_STEPPER_DRIVERS)
   #define INVERT_Y2_VS_Y_DIR true   // Set 'true' if Y motors should rotate in opposite directions
-  //#define Y_DUAL_ENDSTOPS
+  #define Y_DUAL_ENDSTOPS
   #if ENABLED(Y_DUAL_ENDSTOPS)
     #define Y2_USE_ENDSTOP _YMAX_
     #define Y2_ENDSTOP_ADJUSTMENT  0

diff --git a/Marlin/src/inc/Version.h b/Marlin/src/inc/Version.h
@@ -25,7 +25,7 @@
  * Release version. Leave the Marlin version or apply a custom scheme.
  */
 #ifndef SHORT_BUILD_VERSION
-  #define SHORT_BUILD_VERSION "418 bugfix-2.0.x"
+  #define SHORT_BUILD_VERSION "418D bugfix-2.0.x"
 #endif
 
 /**