automatically update translations

i18n/cs/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md

@@ -41,27 +41,27 @@ The default IP address for most routers is `192.168.1.1` or `192.168.0.1`. If
 
 2. Look for the _default_ entry. The IP address next to it is your router’s IP address.
 
-## 2) Make sure SSH and **JFFS custom scripts are e**nabled on the router
+## 2) Make sure SSH and JFFS custom scripts are enabled on the router
 
 First, make sure that SSH access is enabled on your router. This setting is usually found in the router’s web interface. JFFS custom scripts will be used to set routing rules.
 
 1. Log in to the web interface. This is usually accessible via a web browser at [`http://192.168.1.1`](http://192.168.1.1/). Otherwise, replace [`192.168.1.1`](http://192.168.1.1/) with your router’s IP address.
 
-2. Scroll down to **Advanced settings**, **Administration** → **System**.
+2. Scroll down to _Advanced settings_, _Administration_ → _System_.
 
-3. Scroll to **Service**, click **Enable SSH** → **LAN**.
+3. Scroll to _Service_, click _Enable SSH_ → _LAN_.
 
-4. Select **22** in **Port** and **Yes** in **Allow Password Login**.
+4. Select _22_ in _Port_ and _Yes_ in _Allow Password Login_.
 
-5. Go up to **Persistent JFFS2 partition** and enable **JFFS custom scripts and configs**.
+5. Go up to _Persistent JFFS2 partition_ and enable _JFFS custom scripts and configs_.
 
-6. Click **Apply** at the bottom of the page.
+6. Click _Apply_ at the bottom of the page.
 
 ## 3) Use an SSH client to connect to the router
 
 You’ll need an SSH client. Most Linux and macOS systems come with an SSH client pre-installed. For Windows, you can use PowerShell, the built-in SSH client in Windows 10/11, or a third-party application like PuTTY.
 
-### Built-in SSH client (Linux/macOS/Windows 10/11)
+### Built-in SSH client (Linux, macOS, and Windows 10/11)
 
 1. Open Terminal or PowerShell.
 
@@ -76,9 +76,9 @@ You’ll need an SSH client. Most Linux and macOS systems come with an SSH clien
 3. If this is your first time connecting to the router via SSH, you’ll see a message like this:
 
    ```text
-      The authenticity of host '192.168.1.1 (192.168.1.1)' can't be established.
-      ECDSA key fingerprint is SHA256:...
-      Are you sure you want to continue connecting (yes/no/[fingerprint])?
+   The authenticity of host '192.168.1.1 (192.168.1.1)' can't be established.
+   ECDSA key fingerprint is SHA256:...
+   Are you sure you want to continue connecting (yes/no/[fingerprint])?
    ```
 
    Type `yes` and press Enter.
@@ -89,10 +89,10 @@ You’ll need an SSH client. Most Linux and macOS systems come with an SSH clien
 
 1. Download and install PuTTY from [the official website](https://www.putty.org/).
 2. Open PuTTY.
-3. In the _**Host Name (or IP address)**_ field, enter your router’s IP address (e.g., `192.168.1.1`).
-4. Make sure the _**Connection type**_ is set to SSH.
-5. Click _**Open**_.
-6. When the terminal window opens, enter the router’s credentials. The SSH login username and password are the same as the admin credentials.
+3. In the _Host Name (or IP address)_ field, enter your router’s IP address (e.g., `192.168.1.1`).
+4. Make sure the _Connection type_ is set to SSH.
+5. Click _Open_.
+6. When the Terminal window opens, enter the router’s credentials. The SSH login username and password are the same as the admin credentials.
 
 ## 4) Install Entware using SSH
 
@@ -182,7 +182,7 @@ modprobe tun
 
    To use AdGuard VPN for Linux, you need an AdGuard account.
 
-   You can sign up on our [website](https://auth.adguard.info/login.html) or in the Terminal.
+   You can sign up on our [website](https://auth.adguard.com/login.html) or in the Terminal.
 
    To sign up or log in, type:
 
@@ -268,9 +268,9 @@ This step configures firewall rules on an Asuswrt-Merlin router to route traffic
 
    If you have more brX interfaces, make sure to include them in the script as well to route their traffic. Alternatively, make sure to specify a different routing rule for those interfaces.
 
-   This script will ensure that all traffic goes through the VPN tunnel. After rebooting or reconnecting to the Internet AdGuard VPN will connect automatically to your last used location.
+   This script will ensure that all traffic goes through the VPN tunnel. After rebooting or reconnecting to the Internet, AdGuard VPN will connect automatically to your last used location.
 
-2. Reboot your router to finish the setup.
+2. Reboot your router to finish setup.
 
    Congrats! Now you have a router secured with AdGuard VPN.
 

i18n/da/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/overview.md

@@ -9,10 +9,10 @@ Et VPN muliggør at oprette en sikker forbindelse til et andet netværk på inte
 
 AdGuard VPN har flere funktioner:
 
-- Hides your real whereabouts and helps you stay anonymous
-- Changes your IP address to protect your data from tracking
-- Encrypts your traffic, making the content inaccessible to scammers
-- Lets you configure where to use VPN and where not to (exclusions feature)
+- Skjuler den reelle færden og hjælper med at forblive anonym
+- Skifter IP-adresse for at beskytte data mod at blive sporet
+- Krypterer trafikken, hvilket gør indholdet utilgængeligt for svindlere
+- Muliggør at opsætte, hvor VPN skal, og ikke skal, bruges (undtagelsesfunktion)
 
 Den næste fordel ved AdGuard VPN til iOS er vores egen VPN-protokol. Den er ekstremt svært at opdage sammenlignet med andre VPN-protokoller, og den er stabil selv med en dårlig internetforbindelse. [Læs mere om AdGuard VPN-protokollen](/general/adguard-vpn-protocol).
 

i18n/da/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/solving-problems/automation.md

@@ -6,7 +6,7 @@ sidebar_label: Sådan opsættes AdGuard VPN-automatisering
 
 Der er ingen app-undtagelser i AdGuard VPN til iOS. Der er dog alligevel en måde at automatisere AdGuard VPN til apps på iPhones og iPads.
 
-## Configuring automatic connection to VPN
+## Opsætning af automatisk tilslutning til VPN
 
 Ved behov for et VPN til en eller flere apps, skal AdGuard VPN opsættes til automatisk at slå til og fra, når disse åbnes og lukkes. Gå til fanen Undtagelser, vælg tilstanden Generel og følg vejledningen. Her beskrives, hvordan automatisering opsættes til Twitter, men en hvilken som helst app kan vælges.
 
@@ -28,7 +28,7 @@ Ved behov for et VPN til en eller flere apps, skal AdGuard VPN opsættes til aut
 
 Nu er der et nyt scenarie: AdGuard VPN aktiveres automatisk, når Twitter-appen startes. Der skal nu oprettes en kommando mere, der automatisk deaktiverer AdGuard VPN, når Twitter-appen lukkes.
 
-## Configuring automatic disconnection from VPN
+## Opsætning af automatisk afbrydelse fra VPN
 
 ![Vejledning. Del 1](https://cdn.adguardvpn.com/public/Adguard/Blog/VPNauto/vpn_off1_en.jpg)