SmartWings Shade Position Tracking Issues

[djw1191]

Checklist

• I have read and followed the above instructions

• I have checked the troubleshooting section and my problem is not described there.

• I have read the changelog and my problem was not mentioned there or the fix did not work.

Describe the issue

I've got a Smartwings branded top down/bottom up shade that is having issues with consistent reporting of level. First reported over in the HA github, but the initial response over there is that it is likely a zwavejs issue and that it may be similar to #5975

The issue is observed when starting a level change, current level of the shade is not reported in the Window Covering and instead the current level is reported in the multilevel switch CC. When setting an explicit level, the correct level does appear to be reported in the CC106, in addition to CC38. I think as a result of the multilevel switch CC, a light is also reported inside of home assistant.

I've attached a debug log, that captures both the re-interview and a level change showing how the device reports the position.

home-assistant/core#122681

Software versions

zwave-js-ui: 9.16.3.7d47bd2
zwave-js: 13.0.2

Home Assistant Z-Wave Integration: 2024.7.3

Device information

Manufacturer: 0x045a
Model name: 0x0004 0x0509
Node ID: 002

Checklist

• I made sure to provide a driver log on level debug.

• The log includes a re-interview of the problematic device (if applicable).

• The log includes the problematic interaction with the device (if applicable).

• I provided the node ID of the problematic device (if applicable).

Upload Logfile

zwavejs_2024-07-27 (1).log

[brononius]

Did you got a solution/workaround for this? I'm encountering the same issue...

[djw1191]

Did you got a solution/workaround for this? I'm encountering the same issue...

I did not, but I did find doing a zwave refresh from home assistant would at least sync the values, so I did do that as a workaround via an automation.

[brononius]

Ah, got that part.
Just, how do you trigger this refresh? Is this timebased, or something else?
I can't find a trigger that will refresh it when I push for example the remote.

[AlCalzone]

Somehow I missed this. Will take a look tomorrow.

[brononius]

OK, let us know if we can provide/test/... anything!

ps bit anoying that when you lower the shades with the 'down-button' or the remote, the status is still 'open'. And since the 'up-botton' in HA is disabled, no way to open it again.

[AlCalzone]

Seems to be the same issue as #6318