ZS5101 device: inverted value for safe and usafe

[zanna1972]

Checklist

• I have read and followed the above instructions

• I have checked the troubleshooting section and my problem is not described there.

• I have read the changelog and my problem was not mentioned there or the fix did not work.

Describe the issue

What is happening?
I have a ZS5101 device (firmware updated) and correctly included in Home assistant.
The entity binary_sensor entity, corresponding to the "safety" of the device, is "unsafe" when the device is ok, and "safe" when I shake the device.

What did you expect to happen instead?
When I shake the device I expect the entity became "unsafe". When I stop shaking I expect the entity became "safe".

Steps to reproduce the behavior:

1. Go to '...'
2. Click on '...'
3. Scroll down to '...'
4. See error

Anything else we should know?

Software versions

Driver (node-zwave-js): ...

Z-Wave JS UI: ...

Home Assistant Z-Wave Integration: ...

Home Assistant Z-Wave JS Addon: 0.4.2

ioBroker.zwave2 Adapter: ...

If you are using something non-standard, tell us here: ...

Device information

Manufacturer: Vision Security
Model name: ZS5101
Node ID: 25

Checklist

• I made sure to provide a driver log on level debug.

• The log includes a re-interview of the problematic device (if applicable).

• The log includes the problematic interaction with the device (if applicable).

• I provided the node ID of the problematic device (if applicable).

Upload Logfile

error_log.txt

[zwave-js-bot]

👋 Hey @zanna1972!

It looks like you attached a logfile, but its filename doesn't look like it a driver log that came from Z-Wave JS.

Please double-check that you uploaded the correct logfile. If you did, disregard this comment.

As a reminder, here's how to create one:

• Z-Wave JS UI
• Home Assistant Z-Wave Integration
• ioBroker.zwave2 Adapter

[AlCalzone]

Unfortunately, we can't do anything about devices that report their status incorrectly. Maybe you can build a template sensor in HA to correct this. I don't know how though.

Your log shows in the end that the "Home Security" sensor status goes from "Intrusion" to idle (at 2024-01-02 23:07:46). Not sure if this is the intended state or not? This is the only change I see in there.