Fibaro fgt001 / 0x010f reports additional battery level on endpoint 0 #6554
-
Checklist
Describe the issueFibaro thermostat fgt001 have special section for reportion endpoint 0 as endpoint 1 for battery level. This is cause endpoint 0 and endpoint 1 are duplicated and endpoint 2 reports battery level for external sensor. With recent version endpoint 1 and endpoint 2 are shown during introduce and are working OK. Manual refresh also shows values OK. But when battery level is reported due to changes (withour request) - it is reported on endpoint 0 and is not remapped. Also battery values found during introduce are shown as 'Battery v1'. And battery values reported on endpoint 0 are shown as 'Battert v0' in zwavejs-ui. Software versionsLatest git as of this issue, but the problem was introduced since of September (approx). Device informationFibaro fgt001 Checklist
Upload LogfileNo response |
Beta Was this translation helpful? Give feedback.
Replies: 3 comments
-
👋 Hey @kvaster! Thanks for opening an issue! It doesn't look like you provided a logfile though. While not strictly necessary for every issue, having a driver log on loglevel debug is required to diagnose most issues. Please consider uploading a logfile that captures your problem. As a reminder, here's how to create one: |
Beta Was this translation helpful? Give feedback.
-
Looks like we already have special handling in place for this device, which maps the battery to endpoint 1, but it still exposes the value on endpoint 0. |
Beta Was this translation helpful? Give feedback.
-
This is now tracked in #6555 |
Beta Was this translation helpful? Give feedback.
This is now tracked in #6555