diff --git a/packages/config/config/devices/0x027a/zen15.json b/packages/config/config/devices/0x027a/zen15.json
index 73cd2bdb7996..4f35d005af09 100644
--- a/packages/config/config/devices/0x027a/zen15.json
+++ b/packages/config/config/devices/0x027a/zen15.json
@@ -1,7 +1,13 @@
 {
 	"manufacturer": "Zooz",
 	"manufacturerId": "0x027a",
-	"label": "ZEN15",
+	"label": [
+		{
+			"$if": "firmwareVersion >= 2.0",
+			"value": "ZEN15 800LR"
+		},
+		"ZEN15"
+	],
 	"description": "Power Switch",
 	"devices": [
 		{
@@ -17,10 +23,22 @@
 	"paramInformation": [
 		{
 			"#": "20",
+			"$if": "firmwareVersion < 2.10",
 			"$import": "~/templates/master_template.json#base_enable_disable",
 			"label": "Overload Protection",
 			"defaultValue": 1
 		},
+		{
+			"#": "20",
+			"$if": "firmwareVersion >= 2.10",
+			"label": "Overload Protection Delay",
+			"description": "This parameter was updated so that the ZEN15 will continue detecting the load power for the specified time below, and will shut off if the current exceeds 16.5A for more than the time specified in the value selected below",
+			"valueSize": 1,
+			"unit": "seconds",
+			"minValue": 2,
+			"maxValue": 5,
+			"defaultValue": 2
+		},
 		{
 			"#": "21",
 			"$import": "~/templates/master_template.json#state_after_power_failure_prev_on_off"
@@ -130,6 +148,24 @@
 				}
 			]
 		},
+		{
+			"#": "36",
+			"$if": "firmwareVersion >= 2.10",
+			"label": "Overload Protection Turn On Delay",
+			"description" : "Disable or set the delay for the automatic turn on after the unit has been turned off after the overload protection was triggered (10–65535 seconds).",
+			"valueSize": 2,
+			"unit": "seconds",
+			"minValue": 0,
+			"maxValue": 65535,
+			"defaultValue": 0,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disabled",
+					"value": 0
+				}
+			]
+		},	
 		{
 			"#": "151",
 			"label": "Power Report Value Threshold",
@@ -220,6 +256,42 @@
 					"value": 0
 				}
 			]
+		},
+		{
+			"#": "175",
+			"$if": "firmwareVersion >= 2.10",
+			"label": "Voltage Report Threshold",
+			"description" : "Choose the threshold the voltage needs to exceed from the last reported value for a new report to be sent to the hub.",
+			"valueSize": 1,
+			"unit": "V",
+			"minValue": 0,
+			"maxValue": 255,
+			"defaultValue": 10,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disabled",
+					"value": 0
+				}
+			]
+		},		
+		{
+			"#": "176",
+			"$if": "firmwareVersion >= 2.10",
+			"label": "Electrical Current Report Threshold",
+			"description" : "Choose the threshold the electrical current (Amps) voltage needs to exceed from the last reported value for a new report to be sent to the hub (1-65535 mA).",
+			"valueSize": 2,
+			"unit": "mA",
+			"minValue": 0,
+			"maxValue": 65535,
+			"defaultValue": 1000,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disabled",
+					"value": 0
+				}
+			]
 		}
 	],
 	"metadata": {