diff --git a/packages/config/config/devices/0x027a/templates/zooz_template.json b/packages/config/config/devices/0x027a/templates/zooz_template.json
index 5b5f12f32270..42a131e62270 100644
--- a/packages/config/config/devices/0x027a/templates/zooz_template.json
+++ b/packages/config/config/devices/0x027a/templates/zooz_template.json
@@ -951,6 +951,12 @@
 			}
 		]
 	},
+	},
+	"zen5x_external_switch_multiple_click": {
+		"label": "External switch multiple click detection",
+		"$import": "~/templates/master_template.json#base_enable_disable",
+		"description": "External switch multiple click detection"
+	},
 	"zen5x_metadata": {
 		"inclusion": "1. Initiate inclusion (pairing) in the app (or web interface).\n2. TAP UP 3 TIMES QUICKLY if using traditional Z-Wave inclusion. \nSCAN THE QR CODE / ENTER THE 5-DIGIT PIN if using the new SmartStart method. The SmartStart security PIN is located on the back of the relay, next to the Z-Wave Plus logo.\n3. The LED indicator will blink green to signal communication and turn green for 2 seconds if inclusion is successful or turn red for 2 seconds if the pairing attempt fails",
 		"exclusion": "1. Bring your Z-Wave gateway (hub) close to the relay if possible\n2. Put the Z-Wave hub into exclusion mode (not sure how to do that? ask@getzooz.com) \n3. Click the Z-Wave button on the relay 3 times quickly (the LED indicator will start blinking green)\n4. Your hub will confirm exclusion, the LED indicator on the relay will turn green for 2 seconds, and the device will disappear from your controller's device list",