TL-SG108E

[hpwGIT]

Added the repository to HACS, restarted and added Integration.
Failed Autentification with correct user and password :-(

[ilielupu]

I have the same problem

[hpwGIT]

As far as I understand the only Switch supported is the TL-SG105E :-(

[ilielupu]

I have also this one running at home and I have the same issue TL-SG105E 3.0

…

On Tue, Jan 23, 2024, 5:49 PM hpw ***@***.***> wrote: As far as I understand the only Switch supported is the TL-SG105E :-( — Reply to this email directly, view it on GitHub <#16 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AIZ4R552OOMCW4RHPOYJW33YP7LX5AVCNFSM6AAAAABBZN6DSOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMBWGM2TKMBWGI> . You are receiving this because you commented.Message ID: ***@***.***>

[ilielupu]

[vmakeev]

Hello guys.

I apologize for not being very responsive in discussions regarding this component.

The issues with supporting different types of switches are due to a poor choice of integration method (parsing router web interface pages).

Ideally, I should engage in reverse engineering the protocol through which the EasySmart utility interacts with the switches, but I catastrophically lack the time for that, so the development had to be put on hold.

As for making this repository private, I cannot do that because I hope that a small percentage of people will still be able to use the component even in its current implementation.

[LagaV]

I just received my TL-SG108PE V5 :

My device is detected, ports sensor and controls are available for all 8 ports.

Unfortunately PoE is not shown / displayed / available, event when "Port PoE state switches" is enabled.

2024-04-11 Update: There seems to be no option to separately switch the PoE ports in this device. EasySmart Utility does not have any option to change PoE on/off.