Moduleconfiguration

Vermont Module Configuration

CryptoPanPrefix

This module is a submodule for the RecordAnonymizer mentioned above. It implements a modified version of the CryptoPan anonymization method. The following only applies if the IP address passing through the module matches a subnet configured in the configuration file - elsewise the address is skipped: The IP address is split into a network and host identifier according to the specified CIDR, i.e. the CIDR represents the number of bits belonging to the network part. After this splitting is done, only the host part of the IP address is anonymized with the basic CryptoPan algorithm. In a second step, the network part is replaced with the preconfigured subnet given in the configuration file in the to field. As seen below, multiple mappings are possible.

• Input type: IpfixRecord
• Output type: IpfixRecord

Example configuration

<anonRecord id="3">
    <anonField>
        <anonMethod>CryptoPanPrefix</anonMethod>
        <anonIE>
            <ieName>destinationIPv4Address</ieName>
        </anonIE>
       <anonParam>12345678901234567890123456789013</anonParam>
       <mappingList>
           <subnet cidr="24">
                <from>192.44.88.0</from>
                <to>222.222.222.0</to>
           </subnet>
           <subnet cidr="16">
                <from>119.152.0.0</from>
                <to>111.111.0.0</to>
           </subnet>
       </mappingList>
    </anonField>
    <copyMode>false</copyMode>
    <next>5</next>
</anonRecord>

Parameters:

Element name	Default value	Description
subnet	none	The element subnet must include the attribute cidr
from	none	Subnet to be anonymized
to	none	Assigned Subnet ID

FpaPcapExporter

Expects IPFIX data records with FPA (Front Payload Aggregation, field IPFIX_ETYPE_frontPayload) or DPA (Dialog-based Payload Aggregation) data elements. This module then creates one/two packet per flow (unidirectional/bidirectional flow) and writes the packets into a PCAP file.

• Input type: IpfixRecord
• Output type: none

Example configuration: pcap.dump 2048

Parameters:

Element name	Default value	Description
filename	none	Filename of PCAP file that is to be created.
snaplen	PCAP_MAX_CAPTURE_LENGTH	Maximum packet size in PCAP file. Default value is specified at compile time.

FpaPacketGenerator

Expects IPFIX data records with FPA (Front Payload Aggregation, field IPFIX_ETYPE_frontPayload) or DPA (Dialog-based Payload Aggregation) data elements. This module then creates one/two packet per flow (unidirectional/bidirectional flow) and forwards raw packets to the next module.

• Input type: IpfixRecord
• Output type: Packet

Example configuration: 6

Parameters: There are no parameters available!

FrontPayloadSigMatcher

Matches flow records containing a front payload field (IPFIX_ETYPE_frontPayload) to signature files in the specified directory. Each signature file includes the tokens (or signature substrings) the payload is searched for. Each token is associated with a support value. The support values of all matching tokens are summed up and the result is compared against a threshold. The module reports a matching signature if the sum of the support values is equal or larger than the threshold.

• Input type: IpfixRecord
• Output type: none

Example configuration:

<frontPayloadSigMatcher id="9">
    <signaturedir>./signatures</signaturedir>
</frontPayloadSigMatcher>

Parameters:

Element name	Default value	Description
signaturedir	none	Directory that contains signature rule files.

Example signature file matching FTP traffic

SIGNATUREID
FTP
TOKEN
FTP
SUPPORT
0.50000
TOKEN
220
SUPPORT
0.50000
THRESHOLD
1.0

Signature file keywords:

Keyword	The line(s) following this keyword are interpreted as...
SIGNATUREID	string which identifies the signature. If omitted, the name of the signature file is used as identifier.
TOKEN	signature substring to be matched. The substring may span multiple lines. Lines must not start with any keyword.
SUPPORT	decimal support value of the preceding token.
THRESHOLD	decimal threshold value of the signature.

HostStatistics

Receives flow records and counts all bytes that were transferred by all hosts in the specified subnet. On reconfiguration, the byte sums and corresponding IP addresses are written to the file specified in element 'logPath'. Attention: This code is alpha status and may be quite slow.

• Input type: IpfixRecord
• Output type: none

Example configuration:

<hostStatistics id="9">
    <subnet>192.168.0.0/16</subnet>
    <addrFilter>src</addrFilter>
    <logPath>hoststats.log</logPath>
    <logInterval>10</logInterval>
</frontPayloadSigMatcher>

Parameters:

Element name	Default value	Description
subnet	none	IP subnet with all hosts that need to be analyzed. IP 4-tuple notation with subnet mask specified in bits.
addrFilter	none	Specifies which IP address fields are used for the IP filter (specified in element 'subnet'). 'src' for the source IP, 'dst' for the destination IP, 'both' for both IP addresses.
logPath	none	File, where statistics are saved.
logInterval	10	Interval in seconds, when statistics are exported. ATTENTION: currently not in use.

IdmefExporter

Exports incoming IDMEF messages to the external perl script idmefsender.pl which sends it over the network to a specified URL.

• Input type: IdmefMessage
• Output type: none

Example configuration:

<idmefExporter id="9">
    <sendurl>http://localhost</sendurl>
    <destdir>idmef_work</destdir>
</idmefExporter>

Parameters:

Element name	Default value	Description
sendurl	none	Destination URL where IDMEF messages must sent to.
destdir	idmef_work	Directory, where IDMEF messages are temporary stored. There they are picked up by the external perl script ''idmefsender.pl'' in directory ''/tools''.

IpfixAggregator

Aggregates incoming IPFIX flows according to specified parameters. Configuration is similar to module PacketAggregator.

• Input type: IpfixRecord
• Output type: IpfixRecord

Example configuration:

<ipfixAggregator id="6">
<rule>
	<templateId>998</templateId>
	<biflowAggregation>1</biflowAggregation>				
	<flowKey>
		<ieName>sourceIPv4Address</ieName>
	</flowKey>
	<flowKey>
		<ieName>destinationIPv4Address</ieName>
	</flowKey>
	<flowKey>
		<ieName>protocolIdentifier</ieName>
	</flowKey>
	<flowKey>
		<ieName>sourceTransportPort</ieName>
	</flowKey>
	<flowKey>
		<ieName>destinationTransportPort</ieName>
	</flowKey>
	<nonFlowKey>
		<ieName>flowStartMilliSeconds</ieName>
	</nonFlowKey>
	<nonFlowKey>
		<ieName>flowEndMilliSeconds</ieName>
	</nonFlowKey>
	<nonFlowKey>
		<ieName>octetDeltaCount</ieName>
	</nonFlowKey>
	<nonFlowKey>
		<ieName>packetDeltaCount</ieName>
	</nonFlowKey>
	<nonFlowKey>
		<ieName>tcpControlBits</ieName>
	</nonFlowKey>
	<nonFlowKey>
		<ieName>revflowStartMilliSeconds</ieName>
	</nonFlowKey>
	<nonFlowKey>
		<ieName>revflowEndMilliSeconds</ieName>
	</nonFlowKey>
	<nonFlowKey>
		<ieName>revoctetDeltaCount</ieName>
	</nonFlowKey>
	<nonFlowKey>
		<ieName>revpacketDeltaCount</ieName>
	</nonFlowKey>
	<nonFlowKey>
		<ieName>revtcpControlBits</ieName>
	</nonFlowKey>			
</rule>
<expiration>
	<inactiveTimeout unit="sec">1</inactiveTimeout>
	<activeTimeout unit="sec">1</activeTimeout>
</expiration>
<pollInterval unit="msec">1000</pollInterval>
<next>4</next>
</ipfixAggregator>				

Parameters:

Element name	Default value	Description
rule	none	Specifies a rule according to which is aggregated. More than one rule may be specified per aggregator.
biflowAggregation	0	Specifies if biflow aggregation is to be performed (0=no biflow, 1=biflow). Only valid in IpfixAggregator. To accomodate biflow information elements, Vermont-specific enterprise type ids were specified: revFlowStartMilliSeconds, revFlowEndMilliSeconds, revFlowStartSeconds, revFlowEndSeconds, revOctetDeltaCount, revPacketDeltaCount and revTcpControlBits.
templateId	none	Template ID (optional).
flowKey	none	Flow key information element - flows are aggregated according to those keys.
nonFlowKey	none	Non-flow key information element - those IEs are aggregated.
ieName	none	name of the IE.
modifier	none	Optional field modifier for flow key IEs ("discard", "mask/X").
match	0	Optional flow key filter for protocol identifier ("TCP", "UDP", "ICMP", or IANA number), IP addresses ("A.B.C.D/M"), port numbers (separated by ",", port range "A:B"), TCP control bits ("FIN", "SYN", "RST", "PSH", "ACK", "URG", separated by ",").
inactiveTimeout	0	Expiration timeout for idle/inactive flows.
activeTimeout	0	Periodic expiration timeout for long-lasting flows (typically larger than inactiveTimeout).
pollInterval	10s	Length of interval when flows should be exported to next module.
hashtableBits	17	Length of hashtable used for aggregation in bits. The resulting hashtable will have a size of ''2^hashtableBits''.

IpfixCollector

Receives IPFIX records from the network and imports them into Vermont.

• Input type: none
• Output type: IpfixRecord

Example configuration:

<ipfixCollector>
<cert>configs/example_certs/collector_cert.pem</cert>
<key>configs/example_certs/collector_key.pem</key>
<CAfile>configs/example_certs/vermontCA.pem</CAfile>
<CApath>/etc/ssl/certs</CApath>

<listener>
	<ipAddress>0.0.0.0</ipAddress>
	<transportProtocol>DTLS_OVER_UDP</transportProtocol>
	<port>4740</port>
	<peerFqdn>exporter.example.com</peerFqdn>
</listener>
<udpTemplateLifetime>300</udpTemplateLifetime>
</ipfixCollector>

**Parameters: **

Element name	Default value	Description
listener	none	Specifies a port on which to listen on for IPFIX data.
ipAddress	none	IP address at which collector receives IPFIX Messages. If not given, collector receives at all local addresses.
transportProtocol	none	SCTP, UDP, DTLS_OVER_SCTP or DTLS_OVER_UDP
port	4739 for insecure, 4740 for secure connections i.e. DTLS	Port on which Vermont listenes for incoming IPFIX flows.
UDP specific
udpTemplateLifetime	70	Seconds after which templates received from UDP exporters are expired. A value of 0 means that templates never expire.
DTLS specific
cert	(none)	See IpfixExporter for details.
key	(none)	See IpfixExporter for details.
CAfile	(none)	See IpfixExporter for details.
CApath	(none)	See IpfixExporter for details.
peerFqdn	(none)	See IpfixExporter for details.

IpfixCsExporter

Writes IPFIX data records to a local disk using the CarmentiS file format. The module recieves Ipfix packets, caches them and writes them as a chunk to disk.

• Input type: IpfixRecord
• Output type: none

Example configuration:

<ipfixCsExporter id="27">
   <filenamePrefix>carmentis_</filenamePrefix>
   <destinationPath>/tmp/carmentis</destinationPath>
   <maxFileSize>20480</maxFileSize>
   <maxChunkBufferTime>300</maxChunkBufferTime>
   <maxChunkBufferRecords>50000</maxChunkBufferRecords>  
   <maxFileCreationInterval>1500</maxFileCreationInterval>
   <exportMode>1</exportMode>
</ipfixCsExporter>

Parameters:

Element name	Default value	Description
filenamePrefix	none	Prefix to each file.
destinationPath	none	Output directory for data files.
maxFileSize	none	Maximum size of one exported file.
maxChunkBufferTime	none	Maximum time in seconds until a chunk will be written.
maxChunkBufferRecords	none	Maximum records per chunk.
maxFileCreationInterval	none	Maximum time in seconds until the currently opened file will be written and a new one opened.
exportMode	none	Sets a flag inside the exported data which privacy level the packets have. 0=plain; 1=anonymized; 2=pseudonymized

IpfixExporter

Exports internal IPFIX records to the network. The transport protocols UDP and SCTP including their secure counterparts i.e. DTLS over UDP and DTLS over SCTP are supported. The OpenSSL library is required for DTLS. At the time of writing, DTLS over SCTP is only available on the FreeBSD platform. To make DTLS over SCTP work, you have to apply the patches from http://sctp.fh-muenster.de/ to OpenSSL.

• Input type: IpfixRecord
• Output type: none

Example configuration:

<ipfixExporter id="7">
    <templateRefreshInterval>10</templateRefreshInterval>
    <maxRecordRate>5000</maxRecordRate>
    <sctpDataLifetime unit="msec">10000</sctpDataLifetime>
    <sctpReconnectInterval unit="sec">30</sctpReconnectInterval>
    <cert>configs/example_certs/exporter_cert.pem</cert>
    <key>configs/example_certs/exporter_key.pem</key>
    <CAfile>configs/example_certs/vermontCA.pem</CAfile>
    <CApath>/etc/ssl/certs</CApath>
    <dtlsMaxConnectionLifetime unit="sec">10</dtlsMaxConnectionLifetime>

    <collector>
        <ipAddressType>4</ipAddressType>
        <ipAddress>127.0.0.1</ipAddress>
        <port>1500</port>
        <transportProtocol>DTLS_OVER_UDP</transportProtocol>
        <peerFqdn>collector.example.com</peerFqdn>
        <mtu>1492</mtu>
    </collector>
</ipfixExporter>

Parameters:

Element name	Default value	Description
observationDomainId	0	Observation Domain ID of the exporter.
templateRefreshInteval	20s	Interval for periodic sending of templates. Applies only to UDP.
ipAddress	none	The collector's IPv4 or IPv6 address. Host names i.e. FQDNs are not accepted.
transportProtocol	none	SCTP, UDP, DTLS_OVER_SCTP or DTLS_OVER_UDP
port	4739 for insecure, 4740 for secure connections i.e. DTLS	Port number of the collector.
maxRecordRate	0	Maximum number of flow records per second sent to collector. A value of 0 disables record sending limitations. The Exporter will then send records at maximum speed.
UDP specific
mtu	0 (PMTU discovery)	The Path Maximum Transmission Unit (PMTU) that should be assumed when creating IPFIX Messages. If set to 0, PMTU discovery will be used to determine a PMTU estimate. This works currently only on Linux. In case the platform does not provide comprehensive PMTU discovery support (e.g., FreeBSD), a conservative default value (1400) is used, which might lead to suboptimal performance. You should, therefore, manually set the PMTU if you are using a platform other than Linux.
SCTP specific
sctpDataLifetime	10000ms	Lifetime of SCTP messages carrying Data Records. SCTP's partial reliablity (i.e. PR-SCTP) policy "timed reliability" as defined in RFC3758 is always turned on.
sctpReconnectInterval	30s	Time that the Exporter waits before reestablishing a lost connection.
DTLS specific
cert	(none)	File containing the certificate chain used for authentication. Quote from OpenSSL manpage: "The certificates must be in PEM format and must be sorted starting with the subject's certificate (actual client or server certificate), followed by intermediate CA certificates if applicable, and ending at the highest level (root) CA."
key	(none)	File containing the private key in PEM format corresponding to the certificate. If left empty, the file specified by the ''cert'' option will be searched for the private key. This allows for the private key to be stored in the same file as the certificate.
CAfile	(none)	A file containing one or more certificates of trusted CAs. This file has to be in PEM format.
CApath	(none)	A directory containing certificates of trusted CAs in PEM format. Quote from OpenSSL man page: "The files each contain one CA certificate. The files are looked up by the CA subject name hash value, which must hence be available."
peerFqdn	(none)	The expected Fully Qualified Domain Name (FQDN) of the Collector. If set, the Collector must present a certificate of which either the subject's Common Name (CN) or one of the subject alternative names matches this FQDN. There is no support for wildcard matching. For the certificate verification to work, ''CAfile'' or ''CApath'' or both must be set in order to specify the locations of the root CA certificates. If ''peerFqdn'' is not set, anonymous cipher suites will be added to the list of permissible cipher suites. The identity of the peer will not be verified then. Note, that no DNS queries will be performed. Technically, the FQDN specified by ''peerFqdn'' does not need to resolve to an IP address.
dtlsMaxConnectionLifetime	1 hour	Lifetime of a DTLS over UDP connection. A new DTLS connection is initiated as soon as the lifetime is up. The old connection is replaced by the new one when the handshake is completed. This mechanism aims to overcome the dead peer problem.

IpfixDbReader

Imports IPFIX flows from a MYSQL database table.

• Input type: none
• Output type: IpfixRecord

Example configuration:

<ipfixDbReader id="10">
    <dbType>mysql</dbType>
    <host>127.0.0.1</host>
    <port>3306</port>
    <dbname>flows</dbname>
    <username>vermont</username>
    <password>v_password</password>
    <timeshift>true</timeshift>
    <next>12</next>
</ipfixDbReader>

Parameters:

Element name	Default value	Description
dbType	none	Type of database. Legal values are "mysql", "postgres", "oracle"
host	none	Host of database.
port	3306	Port number of database.
dbname	none	Database name.
username	none	Username for database access.
password	none	Password for database access.
timeshift	false	Shift time stamps to current time.
fullspeed	false	If true, tables are read at full speed. Timeshifts are disabled. Otherwise, records are read from table approximately at the same speed as they were originally exported.
observationDomainId	0	Observation Domain Id assigned to the records.

IpfixDbWriter

Exports IPFIX flows to a database table in a MySQL, PostgreSQL or Oracle database.

• Input type: IpfixRecord
• Output type: none

Example configuration:

<ipfixDbWriter id="10">
	<dbType>mysql</dbType>
    <host>127.0.0.1</host>
    <port>3306</port>
    <dbname>flows</dbname>
    <username>vermont</username>
    <password>v_password</password>
    <bufferrecords>30</bufferrecords>
    <tablePrefix>f</tablePrefix>
    <columns>
        <name>flowStartSeconds</name>
        <name>flowEndSeconds</name>
        <name>sourceIPv4Address</name>
        <name>destinationIPv4Address</name>
        <name>octetDeltaCount</name>
        <name>packetDeltaCount</name>
    </columns>
</ipfixDbWriter>

Parameters:

Element name	Default value	Description
dbType	none	Type of database. Legal values are "mysql", "postgres", "oracle"
useLegacyNames	false	Enables/Disables the use of legacy VERMONT db names. The use of the old names is hihgly discouraged
host	none	Host of MySQL database.
port	3306	Port number of database.
dbname	none	Database name.
username	none	Username for database access.
password	none	Password for database access.
bufferrecords	30	Amount of flow records to buffer until they are written to the database.
tablePrefix	f	Prefix of flow tables created in the database.
observationDomainId	none	Observation Domain Id overriding the value to the records.
name	none	IPFIX IE name or legacy VERMONT column name (if useLegacyNames is set to true) (see IpfixDbCommon.hpp for leagcy names currently one of "srcIP", "dstIP", "srcPort", "dstPort", "proto", "dstTos", "bytes", "pkts", "firstSwitched", "lastSwitched", "firstSwitchedMillis", "lastSwitchedMillis", "exporterID", "tcpControlBits", "revbytes", "revpkts", "revFirstSwitched", "revLastSwitched", "revFirstSwitchedMillis", "revLastSwitchedMillis", "revTcpControlBits", "maxPacketGap")

IpfixFileWriter

Dumps ipfix messages into data files.

• Input type: IpfixRecord
• Output type: none

Example configuration:

<ipfixFileWriter id="11">
	<observationDomainId>99</observationDomainId>
	<maximumFilesize>64 </maximumFilesize>
	<destinationPath>/home/test</destinationPath> 
	<filenamePrefix>my_dump</filenamePrefix> 
</ipfixFileWriter> 

Parameters:

Element name	Default value	Description
observationDomainId	0	Observation Domain Id assigned to the records.
maximumFilesize	2097152	maximum size for the date files in KiB (maximumFilesize*1024 == maxmimum filesize in bytes)
destinationPath	./	Output directory for the data files.
filenamePrefix	ipfix.dump	Basename of the generated filenames. Please note that every filename will be suffixed with a consecutive 10-digit number starting at 0.

IpfixNetflowExporter

Exports flows as Netflow.v5 records, filling non-existent fields with 0. Attention: do not send Biflows to this module, as Netflow.v5 only supports undirectional flows. The reverse direction will be ignored!

• Input type: IpfixRecord
• Output type: none

Example configuration:

<ipfixNetflowExporter id="11">
    <host>localhost</host>
    <port>9995</port>
    <maxRecordRate>500</maxRecordRate> 
</ipfixFileWriter> 

Parameters:

Element name	Default value	Description
host	none	Destination host name where Netflow packets should be sent to.
port	none	Destination port.
maxRecordRate	0	Maximum number of data/flow records to be sent to the receiving side. Higher flow rates will block the exporter, so maybe a buffer is required in front of the module. A value of 0 disables record sending limitations. The Exporter will then send records at maximum speed.
filenamePrefix	ipfix.dump	Basename of the generated filenames. Please note that every filename will be suffixed with a consecutive 10-digit number starting at 0.

IpfixReceiverFile

Reads ipfix message from data files generated with IpfixFileWriter.

• Input type: none
• Output type: IpfixRecord

Example configuration:

    <ipfixReceiverFile id="1">
	<packetFileDirectory>/home/test/</packetFileDirectory>
	<packetFileBasename>my_dump</packetFileBasename>
	<ignoreTimestamps>false</ignoreTimestamps>
	<offlineSpeed>2.0</offlineSpeed>
	<from>0</from>
	<to>5</to>
	<next>5</next>
</ipfixReceiverFile>

Parameters:

Element name	Default value	Description
packetFileDirectory	./	Standard directory to read files from.
packetFileBasename	ipfix.dump	Basename of the filenames, i.e. the filename without the suffixed number.
form	0	Suffix of the first file to read from.
to	end	Suffix of the last file to read from. If not specified, the suffix of the last file available will be used.
ignoreTimestamps	true	If set to false, the ipfix messages will be processed with the same delay as they were originally recorded by IpfixFileWriter
offlineSpeed	1.0	Sets the speed multiplier for file reading. A value %%<=%% 0 is equivalent to ignoreTimestamp=true. This value has no effect unless ignoreTimestamps is set to false.

IpfixPayloadWriter

Writes IPFIX records including front payload into files. Only the first N (to be set in parameters) flows in chronological order are regarded. It is expected, that incoming flows are biflows and include front payload. For each biflow, three files are generated: .info contains header information of the flow, two .payload files contain front payload in both directions.

• Input type: IpfixRecord
• Output type: none

Example configuration:

<ipfixPayloadWriter id="5">
 <destPath>payload_work</destPath>
 <filenamePrefix>vfp</filenamePrefix>
 <connNumber>10</connNumber>
 <ignoreEmptyPayload>1</ignoreEmptyPayload>
</ipfixPayloadWriter>

Parameters:

Element name	Default value	Description
destPath	none	Relative path where output files are stored.
filenamePrefix	none	Prefix for generated filenames.
connNumber	none	Amount of connections that are recorded. If this parameter is set to 0, no sorting will be performed and all incoming flows will be directly written to filesystem.
ignoreEmptyPayload	false	Set to true if all connections/biflows with empty payload shoud be ignored.
ignoreIncompleteTCP	false	Set to true if all TCP biflows without SYN flags in both directions should be ignored.
password	none	Password for database access.
bufferrecords	30	Amount of flow records to buffer until they are written to the database.
startIndex	0	Start index of first flow written to disk. Useful if already partially written dump on disk needs to be completed.

IpfixPrinter

Prints incoming Ipfix flows to stdout for debugging purposes.

• Input type: IpfixRecord
• Output type: none

Example configuration:

<ipfixPrinter id="8">
    <outputType>tree</outputType>
    <filename>output.log</filename>
</ipfixPrinter>

Parameters:

Element name	Default value	Description
outputType	tree	Determines the output format of IpfixPrinter. 'tree' constructs a tree of each incoming DataRecord with all values, 'table' constructs a table-like output format, 'line' produces one line of output per DataRecord, and 'none' does not output anything.
filename	none	Sets the name of the output file. If nothing is specified (which is the default), data is printed on STDOUT.

IpfixQueue

Caches IPFIX records in a queue until next module is ready to process them.

• Input type: IpfixRecord
• Output type: IpfixRecord

Example configuration:

<ipfixQueue id="3">
<maxSize>10</maxSize>
<next>6</next>
</ipfixQueue>			

Parameters:

Element name	Default value	Description
maxSize	1	Maximum number of items in queue. If queue is full, no new packets are accepted and preceding modules are paused.

IpfixSampler

Samples IPFIX records using a simple sampler based on modulo.

• Input type: IpfixRecord
• Output type: IpfixRecord

Example configuration:

<ipfixSampler id="3">
<flowRate>0.1</flowRate>
<next>6</next>
</ipfixSampler>			

Parameters:

Element name	Default value	Description
flowRate	1	Ratio of flows that should pass sampler. When set to 0.1, 10% of all flows pass the module. Attention: internally, after calculating the inverse, this value is converted to an integer for the modulo operation. So values close to 1 may not be reflected properly by the sampler. Values above 1 are not allowed.

Observer

Captures raw packets using the PCAP interface.

• Input type: none
• Output type: Packet

Example configuration:

<observer id="1">
<interface>eth1</interface>
<pcap_filter>ip</pcap_filter>
<next>2</next>
</observer>

Parameters:

Element name	Default value	Description
interface	none	Interface PCAP listens to. Do not use in combination with parameter filename.
captureLength	128	Sets the capture length of each packet. Packets bigger than that size are truncated. ATTENTION: if payload is analyzed in later modules, this parameter needs to be large enough!
filename	none	Must be specified if Vermont needs to read from file and contains its filename. Do not use in combination with parameter interface.
pcap_filter	none	Filter specification which is passed to PCAP (usually `ip' to only capture IP packets).
replaceTimestamps	false	If true, PCAP packet timestamps are replaced with current time. This parameter only applies to PCAP file reading.
offlineSpeed	1.0	Only applies to PCAP file reading. Sets the speed multiplier for offline PCAP file reading. A negative value means read as fast as you can.
offlineAutoExit	true	Only applies to PCAP file reading. Sets if Vermont should be shut down automatically after reading all PCAP file data.
maxPackets	0	Specifies a maximum number of packets to be processed by the Observer. After this number is reached, the Observer stops reading packets and may trigger the shutdown, if parameter 'offlineAutoExit' was specified. If this parameter is set to 0, the Observer may read an infinite amount of packets.

P2PDetector

Detects Peer-to-Peer Clients in a subnet. Attention: IPFIX flows must be aggregated to biflows.

• Input type: IpfixRecord
• Output type: IdmefMessage

Example configuration:

<p2pDetector id="5">
<analyzerid>P2PDetector</analyzerid>
<interval>300</interval>
<subnet>192.168.1.0/24</subnet>
<udpRateThreshold>0.013</udpRateThreshold>
<udpHostRateThreshold>0.0007</udpHostRateThreshold>
<tcpRateThreshold>0.082</tcpRateThreshold>
<coexistentTCPConsThreshold>2.9</coexistentTCPConsThreshold>
<rateLongTCPConsThreshold>0.018</rateLongTCPConsThreshold>
<tcpVarianceThreshold>0.068</tcpVarianceThreshold>
<failedConsPercentThreshold>4.8</failedConsPercentThreshold>
<tcpFailedRateThreshold>0.01</tcpFailedRateThreshold>
<tcpFailedVarianceThreshold>0.3</tcpFailedVarianceThreshold>
<next>6</next>
</p2pDetector>	

Parameters:

Element name	Default value	Description
analyzerid	none	Analyzer ID which is inserted into the generated IDMEF message.
interval	300	Interval in seconds for repeated computing of the criteria
subnet	0.0.0.0	Subnet to be researched
udpRateThreshold	0.013	Threshold for udp rate. Calculated criteria must be above this value to be detected as a peer
udpHostRateThreshold	0.0007	Threshold for udp host rate. Calculated criteria must be above this value to be detected as a peer
tcpRateThreshold	0.082	Threshold for tcp rate. Calculated criteria must be above this value to be detected as a peer
coexistentTCPConsThreshold	2.9	Threshold for coexistent TCP connections. Calculated criteria must be above this value to be detected as a peer
rateLongTCPConsThreshold	0.018	Threshold for rate of long TCP conncetions. Calculated criteria must be above this value to be detected as a peer
tcpVarianceThreshold	0.068	Threshold for variance of new TCP connections. Calculated criteria must be below this value to be detected as a peer
failedConsPercentThreshold	4.8	Threshold for percentage of failed TCP connections. Calculated criteria must be above this value to be detected as a peer
tcpFailedRateThreshold	0.01	Threshold for rate of failed TCP connections. Calculated criteria must be above this value to be detected as a peer
tcpFailedVarianceThreshold	0.3	Threshold for variance of failed TCP connections. Calculated criteria must be below this value to be detected as a peer

PacketFilter

Forwards packets which match specified filter configuration and drops non-matching packets.

• Input type: Packet
• Output type: Packet

Example configuration:

<filter id="2">
<countBased>
	<interval>4</interval>
	<spacing>2</spacing>
<countBased>
<timeBased>
	<interval>100</interval>
	<spacing>50</spacing>
</timeBased>
<stringBased>
	<is>bla</is>
	<isnot>blub</isnot>
	<is type="HEX">0xFF024F</is>
</stringBased>
<regexBased>
	<matchPattern>is\s*not</matchPattern>
</regexBased>
<hostBased>
	<addrFilter>src</addrFilter>
	<ip>1.2.3.4</ip>
	<ip>1.2.3.6</ip>
</hostBased>
<next>3</next>
</filter>

Parameters:

Element name	Default value	Description
countBased	none	Creates a count-based filter. Spacing defines the number of packets accepted at the beginning of the period, interval specifies the length of the period
timeBased	none	Creates a time-based filter. Spacing defines the number of milliseconds during which time all incoming packets are accepted at the beginning of the period, interval specifies the length of the period in milliseconds.
interval	none	Belongs to either countBased or timeBased filter. Specifies length of period.
spacing	none	Belongs to either countBased or timeBased filter. Specifies amount of time or number of packets accepted.
stringBased	none	Creates a string-based filter which scans for specified strings inside the packet payload. If more than one search element is specified, only packets will be forwarded which match **all** specifications.
is	none	Accepts packets which contain included ASCII string. If attribute "type" is set to "HEX", the tag's content MUST include a hexstring which specifies the binary data to be searched for.
isnot	none	Drops packets which contain included ASCII string. If attribute "type" is set to "HEX", the tag's content MUST include a hexstring which specifies the binary data to be searched for.
regexBased	none	Creates a regex-based filter which scans for specified regexes inside the packet payload. If more than one regex is specified, only packets will be forwarded which match *all* specifications.
matchPattern	none	Specifies a regular expression used by the regex-based filter.
stateConnectionBased	none	Creates a filter which searches for TCP connections and matches all packets that contain the first N payload bytes. It uses a determinstic algorithm that will consume all the memory necessary to store all seen TCP connections.
connectionBased	none	Same as stateConnectionBased filter, but uses a different algorithm for TCP connection tracking. The algorithm is probabilistic and uses a fixed amount of memory to store the TCP connections.
timeout	3	Belongs to either stateConnectionBased or connectionBased filter. Specifies the time in seconds a seen TCP connection request is valid, before it will time out.
bytes	100	Belongs to either stateConnectionBased or connectionBased filter. Specifies how much Payload should be exported in bytes.
hashFunctions	3	Belongs to connectionBased filter. Specifies the number of hash functions that are used to index the bloom filters.
filterSize	1000	Belongs to connectionBased filter. Specifies the size of the bloom filters that are used by the connection based filter.
exportControlPackets	true	Controls wether TCP control packets (SYN/FIN/RST) are exported by stateConnectionBased and connectionBased filter.
anonFilter	none	Specifies a filter that performs anonymization on captured network packets. Contains one or more anonFields. This tag can have several subtags. The subtags are the same ones that can be used in the RecordAnonymizer module
payloadFilter	none	Payload is dropped, when this filter is specified.
hostBased	none	Hostbased filter, which filters packets not belonging to any IPs listed in configuration.
addrFilter	none	Specifies if source IP address ('src'), destination IP address ('dst') or both IP addresses ('both') are used in the filter.
ip	none	IP address that is accepted by the filter. May appear multiple times.

PacketQueue

Caches packets in a queue until next module is ready to process them.

• Input type: Packet
• Output type: Packet

Example configuration:

<packetQueue id="3">
<maxSize>10</maxSize>
<next>6</next>
</packetQueue>	

Parameters:

Element name	Default value	Description
maxSize	0	Maximum number of items in queue. If queue is full, no new packets are accepted and preceding modules are paused.

PacketAggregator

Aggregates incoming raw packets to flows according to specified parameters.

• Input type: Packet
• Output type: IpfixRecord

Example configuration:

<packetAggregator id="6">
<rule>
	<templateId>998</templateId>
	<flowKey>
		<ieName>sourceIPv4Address</ieName>
	</flowKey>
	<flowKey>
		<ieName>destinationIPv4Address</ieName>
	</flowKey>
	<flowKey>
		<ieName>protocolIdentifier</ieName>
	</flowKey>
	<flowKey>
		<ieName>sourceTransportPort</ieName>
	</flowKey>
	<flowKey>
		<ieName>destinationTransportPort</ieName>
	</flowKey>
	<nonFlowKey>
		<ieName>flowStartMilliSeconds</ieName>
	</nonFlowKey>
	<nonFlowKey>
		<ieName>flowEndMilliSeconds</ieName>
	</nonFlowKey>
	<nonFlowKey>
		<ieName>octetDeltaCount</ieName>
	</nonFlowKey>
	<nonFlowKey>
		<ieName>packetDeltaCount</ieName>
	</nonFlowKey>
	<nonFlowKey>
		<ieName>tcpControlBits</ieName>
	</nonFlowKey>
</rule>
<expiration>
	<inactiveTimeout unit="sec">1</inactiveTimeout>
	<activeTimeout unit="sec">1</activeTimeout>
</expiration>
<pollInterval unit="msec">1000</pollInterval>
<next>4</next>
</packetAggregator>	

Parameters:

Element name	Default value	Description
templateId	none	Template ID (optional).
flowKey	none	Flow key information element - flows are aggregated according to those keys.
nonFlowKey	none	Non-flow key information element - those IEs are aggregated.
ieName	none	name of the IE.
modifier	none	Optional field modifier for flow key IEs ("discard", "mask/X").
match	0	Optional flow key filter for protocol identifier ("TCP", "UDP", "ICMP", or IANA number), IP addresses ("A.B.C.D/M"), port numbers (separated by ",", port range "A:B"), TCP control bits ("FIN", "SYN", "RST", "PSH", "ACK", "URG", separated by ",").
inactiveTimeout	0	Expiration timeout for idle/inactive flows.
activeTimeout	0	Periodic expiration timeout for long-lasting flows (typically larger than inactiveTimeout).
pollInterval	10s	Length of interval when flows should be exported to next module.
hashtableBits	17	Length of hashtable used for aggregation in bits. The resulting hashtable will have a size of 2%%^%%{hashtableBits}.

PacketIdmefReporter

For each incoming packet an IDMEF message is generated. An extract of the packet payload called snapshot may be included in the IDMEF message.

• Input type: Packet
• Output type: IdmefMessage

Example configuration:

<packetIdmefReporter>
<snapshotoffset>12</snapshotoffset>
<snapshotlength>20</snapshotlength>
<analyzerid>idmefreporter</analyzerid>
<idmeftemplate>idmef/templates/idmefreporter_template.xml</idmeftemplate>
</packetIdmefReporter>				

Parameters:

Element name	Default value	Description
snapshotoffset	0	Byte offset from start of packet payload.
snapshotlength	0	Byte length of snapshot. If it exceeds packet length, snapshot will be truncated.
analyzerid	none	Analyzer ID that will be included in IDMEF message.
idmeftemplate	none	Path to template file for IDMEF message.

PcapExporterFile

Exports incoming packets into a file in PCAP format.

• Input type: Packet
• Output type: none

Example configuration:

<pcapExporterFile>
<filename>output.pcap</filename>
</pcapExporterFile>

Parameters:

Element name	Default value	Description
filename	none	Name of the output pcap file.
linkType	EN10MB	Data link type of the output file. Names are DLT_ names form the pcap man page with the DLT_ removed (see `man pcap')
snaplen	PCAP_MAX_CAPTURE_LENGTH	Snaplen for the pcap file

PcapExporterPipe

Writes packets in PCAP format into a pipe, allowing another process to read these packets via STDIN.

• Input type: Packet
• Output type: none

Example configuration:

<pcapExporterPipe>
<logfilebasename>/tmp/pcap_exporter_fifo</logfilebasename>
<snaplen>1512</snaplen>
<sigkilltimeout>4</sigkilltimeout>
<command>tcpdump -nr -</command>
<workingpath>/tmp</workingpath>
</pcapExporterPipe>

Parameters:

Element name	Default value	Description
logfilebasename	none	If specified, STDOUT and STDERR of fiforeadercmd will be redircted into this file.
command	none	A single (i.e. no shell) command, which must read PCAP files via STDIN.
workingpath	none	Working directory for the command to be executed.
sigkilltimeout	1	Maximum additional waiting time in seconds, until a SIGKILL is sent to the reader process on module shutdown.
appenddate	false	If set to true, the logfilename given as logfilebasename will be suffixed with the current time and date
restartonsignal	false	If set to true, the command specified as fiforedercmd will be restarted, when a SIGUSR2 is sent to vermont
linkType	EN10MB	Data link type of the output file. Names are DLT_ names form the pcap man page with the DLT_ removed (see `man pcap')
snaplen	PCAP_MAX_CAPTURE_LEN	Snaplen for the pcap file
restartInterval	0	If > 0, the process is restarted regularly every restartIntervall seconds, whereby the incoming packets' capture timestamp is used.

PsampExporter

Exports incoming packets as PSAMP records over the network.

• Input type: Packet
• Output type: none

Example configuration:

<psampExporter id="1">
<observationDomainId>123</observationDomainId>
<ipfixPacketRestrictions>
	<maxPacketSize>200</maxPacketSize>
	<maxExportDelay unit="msec">500</maxExportDelay>
</ipfixPacketRestrictions>
<packetReporting>
	<templateId>888</templateId>
	<reportedIE>
		<ieName>sourceIPv4Address</ieName>
	</reportedIE>
	<reportedIE>
		<ieName>destinationIPv4Address</ieName>
	</reportedIE>
	<reportedIE>
		<ieName>ipPayloadPacketSection</ieName>
		<ieLength>65535</ieLength>
	</reportedIE>
</packetReporting>
<collector>
	<ipAddress>127.0.0.1</ipAddress>
	<transportProtocol>UDP</transportProtocol>
	<port>4739</port>
</collector>
</psampExporter>			

Parameters:

Element name	Default value	Description
observationDomainId	0	Observation Domain ID of the exporter.
ipfixPacketRestrictions	none	Restrictions for IPFIX packets.
maxPacketSize	none	Maximum size of IPFIX packets.
maxExportDelay	none	Maximum delay until IPFIX packet is sent to destination.
packetReporting	none	Specifies elements to be exported for one template.
templateId	0	Specifies template ID.
reportedIE	none	Specifies one information element to be reported.
ieName	none	IPFIX type id of element to be exported.
ieLength	none	Optional specification of element length (usually only used by "ipPayloadPacketSection".
collector	none	Contains specification of one destination for PSAMP records.
idAddress	none	IP address of destination.
transportProtocol	none	Transport protocol to be used. Currently only "UDP" is supported.
port	4739	Port of destination.
templateRefreshRate	5000	Number of records, until template is resent.
templateRefreshInterval	30s	Time, until template is resent.

RecordAnonymizer

This module is capable of anonymizing arbitary fields within IPFIX-Records using different anonymization methods.

• Input type: IpfixRecord
• Output type: IpfixRecord

Example configuration:

<anonRecord id="3">
<anonField>
	<anonIE>
		<ieName>sourceIPv4Address</ieName>
	</anonIE>
	<anonMethod>CryptoPan</anonMethod>
	<anonParam>insert key here</anonParam>
</anonField>
<anonField>
	<anonIE>
		<ieName>destinationIPv4Address</ieName>
		<ieLength>4</ieLength>
	</anonIE>
<anonMethod>CryptoPan</anonMethod>
	<anonParam>insert key here</anonParam>
</anonField>
<copyMode>false</copyMode>
<next>6</next>
</anonRecord>

Parameters:

Element name	Default value	Description
anonField	none	Specifies one field and an anonymization method for that field. Contains one anonIE, one anonMethod and an optional anonParam tag.
anonIE	none	Specifies the information element that needs to be anonymized. Belongs to anonField.
ieName	none	Specifies the name of the field that needs to be anonymized. Belongs to anonIE.
anonMethod	none	Specifies the anonymization method that is used to anonymize a given header field. Belongs to anonField. Possible values are: BytewiseHashHmacSha1, BytewiseHashSha1, ConstOverwrite, ContinuousChar, HashHmacSha1, HashSha1, Randomize, Shuffle, Whitenoise, CryptoPan
anonParam	none	Specifies an optional parameter to the anonymization method. Different methods need different params. ByteWiseHashHmacSha1, HashHmacSha1 need an variable sized key. ConstOverwrite needs one character as parameter. CryptoPan needs an 32 bytes long parameter (16 bytes key, 16 bytes pad). For CryptoPan and ConstOverwrite, keys can be specified as normal text, or as hexadecimal string starting with '0x'.
copyMode	false	If true, the Record Anonymizer creates a copy of the incoming record and leaves the original record unchanged. Copy mode should be turned on if the original records are processed by other moduls as well.

SensorManager

Module which controls all sensors ("Messfühle") inside Vermont. It does not have any in- or output types and must not be connected to any other module. It is recommended to set its ID to 99 to express its special role. If this module is specified in the configuration, available sensors are activated and polled regularly. It may only be specified once.

• Input type: none
• Output type: none

Example configuration:

<sensorManager id="99">
<checkinterval>2</checkinterval>
<outputfile>sensor_output.xml</outputfile>
</sensorManager>	

Parameters:

Element name	Default value	Description
checkinterval	2	Interval in seconds, when all sensors are polled and the output file is written to.
outputfile	''sensor_output.xml''	Path to file, where sensor data is stored.
append	0	Set to 1 if output file should be appended to, and not overwritten.

TrwPortscanDetector

Detects horizontal portscans in incoming IPFIX flows. Attention: IPFIX flows must be aggregated to biflows. To achieve best results, flows should contain the following IEs:

sourceIPv4Address
destinationIPv4Address
sourceTransportPort
destinationTransportPort
protocolIdentifier
flowStartMilliSeconds
flowEndMilliSeconds
revFlowStartMilliSeconds
revFlowEndMilliSeconds
octetDeltaCount
revOctetDeltaCount
packetDeltaCount
revPacketDeltaCount
tcpControlBits
revTcpControlBits

• Input type: IpfixRecord
• Output type: IdmefMessage

Example configuration:

<trwPortscanDetector id="8">
<analyzerid>trwportscandetector</analyzerid>
<idmeftemplate>idmef/templates/trwportscan_template.xml</idmeftemplate>
<hashbits>20</hashbits>
<timeexpirepending>86400</timeexpirepending>
<timeexpirescanner>1800</timeexpirescanner>
<timeexpirebenign>1800</timeexpirebenign>
<timecleanupinterval>10</timecleanupinterval>
<next>9</next>
</trwPortscanDetector>	

Parameters:

Element name	Default value	Description
analyzerid	none	Analyzer ID which is inserted into the generated IDMEF message.
idmeftemplate	none	Path to IDMEF template which is used to generate the IDMEF message.
hashbits	20	Amount of bits used for hashtable to contain watched IP addresses.
timeexpirepending	86400	Seconds, until non-classified inactive IP addresses are purged from table.
timeexpirescanner	1800	Seconds, until as portscanner classified IP addresses are purged from table.
timeexpirebenign	1800	Seconds, until as benign classified IP addresses are purged from table.
timecleanupinterval	10	Interval length in seconds, when IP address table is scanned for entries to be purged.

FlowLenAnalyzer

Output statistics on the observed flow lenghts. Usefull for getting data for flow len distributions from the network.

• Input type: IpfixRecord
• Output type: none

Example configuration:

<flowLenAnalyzer id="10">
     <flowFilename>biflowlens.txt</flowFilename>
     <binFilename>bins.txt</binFilename>
     <bins>100,1000,10000,100000,1000000,10000000,100000000,1000000000,10000000000</bins>
</flowLenAnalyzer> 

Parameters:

Element name	Default value	Description
flowFileName	none	Output file for flowlen information.
binFileName	none	Output file for binned flow len information
bins	none	Comma separated list of bins that are used to group flow lens

NetflowV9Converter

Converts NetflowV9Records into IpfixRecords. The main difference between both type of records are their notion of times. IPFIX uses timestamps that are based on the current time encoded in unix timestamps (relative to 1/1/1970) while NetflowV9 uses timestamps that are relative to the uptime of the flow monitor. The module converts the NetflowV9 timestamps into IPFIX timestamps and generates IPFIX compliant records.

• Input type: NetFlowRecords
• Output type: IpfixRecords

Example configuration:

<netflowV9Converter id="2">
    <keepFlowSysUpTime>true</keepFlowSysUpTime>
    <next>3</next>
</netflowV9Converter> 

Parameters:

Element name	Default value	Description
copyMode	true	Defines whether a record is modified in-place or if a modified copy is created and passed to the other modules.
keepFlowSysUpTime	false	Defines if old NetFlowV9 timestamps are replaced by the new timestamps or if the new timestamps are added to the flow record. If this configuration is true, the old timestamps will be preserved. If set to false, then the old timestamps will be replaced.