Skip to content

Latest commit

 

History

History
48 lines (34 loc) · 1.92 KB

README.md

File metadata and controls

48 lines (34 loc) · 1.92 KB
Raw

Heishamon in Domoticz

There are two options to integrate HeishaMon into Domoticz. You can choose for the domoticz plugin or a nodered flow. The domoticz plugin is plug-and-play but the nodered flow will allow you to more fine tune your system to your needs.

Plugin option

A domoticz plugin (https://github.com/MarFanNL/HeishamonMQTT) is available which, once installed, will create the necessary device and will talk to mqtt for you.

Nodered option

Prerequisite:

Installation instructions:

In Influx:

  • create a database called "Panasonic" (go to SSH console -> typ "influx" -> typ "create database Panasonic" -> typ "show databases" and see if Panasonic is listed)

In Node-red:

  • import the 'json' file
  • adjust the IDX values in the Node-Red function 'global setup' to the IDX values of your install.
  • note: you have to adjust values under "SensorMapping" (values from Panasonic to Domoticz) and "ActionMapping" (Domoticz commands to Panasonic). These IDX values can be the same.
  • If nodered is on other server then the influx or MQTT server then change these IP addresses in the outgoing and incoming nodes.
  • If you are not using influx out open the "influx out" node and disable it (bottom of the screen)

For example create these devices in Domoticz:

  • Create the following dummy sensors in Domoticz and use the IDX values in the corresponding lines in the setup node. Temperature:

    • Outlet
    • Inlet
    • Outdoor Percentage:
    • Pumpspeed
    • Compressor frequency Counter:
    • startstops
    • working hours

  • Create the following switches:

    • On Off switch (switch heatpump on/off)
    • Selector switch (to set the silent mode: Off, silent 1, Silent 2, Silent 3)
    • Thermostat Setpoint (to set the heatpump setpoint or temperature shift)