diff --git a/.github/setup-apt.sh b/.github/setup-apt.sh index 49efd024a8d..a470961c7f4 100755 --- a/.github/setup-apt.sh +++ b/.github/setup-apt.sh @@ -6,4 +6,4 @@ apt update apt install -y autoconf automake autotools-dev curl python3 python3-pip libmpc-dev libmpfr-dev \ libgmp-dev gawk build-essential bison flex texinfo gperf libtool \ patchutils bc zlib1g-dev libexpat-dev git ninja-build cmake libglib2.0-dev expect \ - device-tree-compiler + device-tree-compiler python3-pyelftools diff --git a/.github/workflows/build.yaml b/.github/workflows/build.yaml index 62df5168d29..2b04c058cb5 100644 --- a/.github/workflows/build.yaml +++ b/.github/workflows/build.yaml @@ -50,7 +50,7 @@ jobs: - name: make report if: | - matrix.os == 'ubuntu-20.04' + matrix.os == 'ubuntu-22.04' && (matrix.mode == 'linux' || matrix.mode == 'newlib') && matrix.compiler == 'gcc' run: | @@ -88,13 +88,10 @@ jobs: runs-on: ${{ matrix.os }} strategy: matrix: - os: [ubuntu-20.04] - mode: [newlib, linux] + os: [ubuntu-22.04] + mode: [newlib] target: [rv64gc-lp64d] sim: [spike] - exclude: - - sim: spike - mode: linux steps: - name: Remove unneeded frameworks to recover disk space run: | @@ -124,7 +121,7 @@ jobs: runs-on: ${{ matrix.os }} strategy: matrix: - os: [ubuntu-20.04] + os: [ubuntu-22.04] mode: [newlib, linux] target: [rv64gc-lp64d] steps: diff --git a/.gitmodules b/.gitmodules index 92bd35f1db2..275c5d6905b 100644 --- a/.gitmodules +++ b/.gitmodules @@ -1,7 +1,7 @@ [submodule "binutils"] path = binutils url = https://sourceware.org/git/binutils-gdb.git - branch = binutils-2_40-branch + branch = binutils-2_41-release-point [submodule "gcc"] path = gcc url = https://gcc.gnu.org/git/gcc.git @@ -39,4 +39,4 @@ [submodule "llvm"] path = llvm url = https://github.com/llvm/llvm-project.git - branch = release/15.x + branch = release/17.x diff --git a/Makefile.in b/Makefile.in index d5b18f6e11e..bf7a9cf7a25 100644 --- a/Makefile.in +++ b/Makefile.in @@ -63,7 +63,7 @@ ifeq ($(MULTILIB_GEN),) NEWLIB_MULTILIB_NAMES := @newlib_multilib_names@ GCC_MULTILIB_FLAGS := $(MULTILIB_FLAGS) else -NEWLIB_MULTILIB_NAMES := $(shell echo "$(MULTILIB_GEN)" | $(SED) 's/;/\n/g'| $(AWK) '{split($$0,a,"-"); printf "%s-%s ", a[1],a[2]}') +NEWLIB_MULTILIB_NAMES := $(shell echo "$(MULTILIB_GEN)" | $(SED) 's/;/\n/g' | $(SED) '/^$$/d' | $(AWK) '{split($$0,a,"-"); printf "%s-%s ", a[1],a[2]}') GCC_MULTILIB_FLAGS := $(MULTILIB_FLAGS) --with-multilib-generator="$(MULTILIB_GEN)" endif GLIBC_MULTILIB_NAMES := @glibc_multilib_names@ @@ -93,12 +93,25 @@ GDB_NATIVE_FLAGS := $(GDB_NATIVE_FLAGS_EXTRA) GLIBC_TARGET_FLAGS := $(GLIBC_TARGET_FLAGS_EXTRA) GLIBC_CC_FOR_TARGET ?= $(LINUX_TUPLE)-gcc GLIBC_CXX_FOR_TARGET ?= $(LINUX_TUPLE)-g++ -GLIBC_TARGET_BOARDS ?= $(shell echo "$(GLIBC_MULTILIB_NAMES) $(EXTRA_MULTILIB_TEST)" | sed 's!\([_a-z0-9]*\)-\([_a-z0-9]*\)!riscv-sim/-march=\1/-mabi=\2/@cmodel@!g') +GLIBC_TARGET_BOARDS ?= $(shell $(srcdir)/scripts/generate_target_board \ + --sim-name riscv-sim \ + --cmodel $(shell echo @cmodel@ | cut -d '=' -f2) \ + --build-arch-abi $(GLIBC_MULTILIB_NAMES) \ + --extra-test-arch-abi-flags-list "$(EXTRA_MULTILIB_TEST)") NEWLIB_CC_FOR_TARGET ?= $(NEWLIB_TUPLE)-gcc NEWLIB_CXX_FOR_TARGET ?= $(NEWLIB_TUPLE)-g++ -NEWLIB_TARGET_BOARDS ?= $(shell echo "$(NEWLIB_MULTILIB_NAMES) $(EXTRA_MULTILIB_TEST)" | sed 's!\([_a-z0-9]*\)-\([_a-z0-9]*\)!riscv-sim/-march=\1/-mabi=\2/@cmodel@!g') -NEWLIB_NANO_TARGET_BOARDS ?= $(shell echo "$(NEWLIB_MULTILIB_NAMES) $(EXTRA_MULTILIB_TEST)" | sed 's!\([_a-z0-9]*\)-\([_a-z0-9]*\)!riscv-sim-nano/-march=\1/-mabi=\2/@cmodel@!g') +NEWLIB_TARGET_BOARDS ?= $(shell $(srcdir)/scripts/generate_target_board \ + --sim-name riscv-sim \ + --cmodel $(shell echo @cmodel@ | cut -d '=' -f2) \ + --build-arch-abi $(NEWLIB_MULTILIB_NAMES) \ + --extra-test-arch-abi-flags-list "$(EXTRA_MULTILIB_TEST)") + +NEWLIB_NANO_TARGET_BOARDS ?= $(shell $(srcdir)/scripts/generate_target_board \ + --sim-name riscv-sim-nano \ + --cmodel $(shell echo @cmodel@ | cut -d '=' -f2) \ + --build-arch-abi $(NEWLIB_MULTILIB_NAMES) \ + --extra-test-arch-abi-flags-list "$(EXTRA_MULTILIB_TEST)") NEWLIB_CC_FOR_MULTILIB_INFO := $(NEWLIB_CC_FOR_TARGET) MUSL_TARGET_FLAGS := $(MUSL_TARGET_FLAGS_EXTRA) @@ -191,11 +204,11 @@ report-gdb: report-gdb-@default_target@ ifeq ($(SIM),qemu) SIM_PATH:=$(srcdir)/scripts/wrapper/qemu:$(srcdir)/scripts SIM_PREPARE:=PATH="$(SIM_PATH):$(INSTALL_DIR)/bin:$(PATH)" RISC_V_SYSROOT="$(SYSROOT)" -SIM_STAMP:= stamps/build-qemu stamps/install-python-package +SIM_STAMP:= stamps/build-qemu else ifeq ($(SIM),spike) # Using spike simulator. -SIM_PATH:=$(srcdir)/scripts/wrapper/spike +SIM_PATH:=$(srcdir)/scripts/wrapper/spike:$(srcdir)/scripts SIM_PREPARE:=PATH="$(SIM_PATH):$(INSTALL_DIR)/bin:$(PATH)" PK_PATH="$(INSTALL_DIR)/$(NEWLIB_TUPLE)/bin/" ARCH_STR="$(WITH_ARCH)" SIM_STAMP:= stamps/build-spike ifneq (,$(findstring rv32,$(NEWLIB_MULTILIB_NAMES))) @@ -893,10 +906,6 @@ stamps/build-pk64: $(PK_SRCDIR) $(PK_SRC_GIT) stamps/build-gcc-newlib-stage2 mkdir -p $(dir $@) date > $@ -stamps/install-python-package: - python3 -m pip install --user pyelftools - date > $@ - stamps/build-qemu: $(QEMU_SRCDIR) $(QEMU_SRC_GIT) rm -rf $@ $(notdir $@) mkdir $(notdir $@) @@ -987,7 +996,8 @@ stamps/check-gcc-linux: stamps/build-gcc-linux-stage2 $(SIM_STAMP) stamps/build- mkdir -p $(dir $@) date > $@ -stamps/check-glibc-linux-%: $(addprefix stamps/build-glibc-linux-,$(GLIBC_MULTILIB_NAMES)) +stamps/check-glibc-linux-%: stamps/build-gcc-linux-stage2 $(SIM_STAMP) stamps/build-dejagnu \ + $(addprefix stamps/build-glibc-linux-,$(GLIBC_MULTILIB_NAMES)) $(eval $@_BUILD_DIR := $(notdir $@)) $(eval $@_BUILD_DIR := $(subst check-,build-,$($@_BUILD_DIR))) $(SIM_PREPARE) $(MAKE) -C $($@_BUILD_DIR) check diff --git a/README.md b/README.md index 62b173aa6c9..7aab3c16315 100644 --- a/README.md +++ b/README.md @@ -193,6 +193,34 @@ by the SIM variable in the Makefile, e.g. SIM=qemu, SIM=gdb, or SIM=spike (experimental).In addition, the simulator can also be selected with the configure time option `--with-sim=`.However, the testsuite allowlist is only mintained for qemu.Other simulators might get extra failures. + +#### Additional Prerequisite + +A helper script to setup testing environment requires +[pyelftools](https://github.com/eliben/pyelftools). + +On newer versions of Ubuntu, executing the following command +should suffice: + + $ sudo apt-get install python3-pyelftools + +On newer versions of Fedora and CentOS/RHEL OS (9 or later), executing +the following command should suffice: + + $ sudo yum install python3-pyelftools + +On Arch Linux, executing the following command should suffice: + + $ sudo pacman -Syyu python-pyelftools + +If your distribution/OS does not have pyelftools package, you can install +it using PIP. + + # Assuming that PIP is installed + $ pip3 install --user pyelftools + +#### Testing GCC + To test GCC, run the following commands: ./configure --prefix=$RISCV --disable-linux --with-arch=rv64ima # or --with-arch=rv32ima @@ -261,6 +289,60 @@ even multilib is disable, but the user must ensure extra multilib test configuration can be work with existing lib/multilib, e.g. rv32gcv/ilp32 test can't work if multilib didn't have any rv32 multilib. +`--with-extra-multilib-test` also support more complicated format to fit the +requirements of end-users. First of all, the argument is a list of test +configurations. Each test configuration are separated by `;`. For example: + + `rv64gcv-lp64d;rv64_zvl256b_zvfh-lp64d` + +For each test configuration, it has two parts, aka required arch-abi part and +optional build flags. We leverage `:` to separate them with some restrictions. + + * arch-abi should be required and there must be only one at the begining of + the test configuration. + * build flags is a array-like flags after the arch-abi, there will be two + ways to arrange them, aka AND, OR operation. + * If you would like the flags in build flags array acts on arch-abi + __simultaneously__, you can use `:` to separate them. For example: + + ``` + rv64gcv-lp64d:--param=riscv-autovec-lmul=dynamic:--param=riscv-autovec-preference=fixed-vlmax + ``` + + will be consider as one target board same as below: + + ``` + riscv-sim/-march=rv64gcv/-mabi=lp64d/-mcmodel=medlow/--param=riscv-autovec-lmul=dynamic/--param=riscv-autovec-preference=fixed-vlmax + ``` + + * If you would like the flags in build flags array acts on arch-abi + __respectively__, you can use ',' to separate them. For example: + + ``` + rv64gcv-lp64d:--param=riscv-autovec-lmul=dynamic,--param=riscv-autovec-preference=fixed-vlmax + ``` + + will be consider as two target boards same as below: + + ``` + riscv-sim/-march=rv64gcv/-mabi=lp64d/-mcmodel=medlow/--param=riscv-autovec-preference=fixed-vlmax + riscv-sim/-march=rv64gcv/-mabi=lp64d/-mcmodel=medlow/--param=riscv-autovec-lmul=dynamic + ``` + + * However, you can also leverage AND(`:`), OR(`,`) operator together but the + OR(`,`) will always have the higher priority. For example: + + ``` + rv64gcv-lp64d:--param=riscv-autovec-lmul=dynamic:--param=riscv-autovec-preference=fixed-vlmax,--param=riscv-autovec-lmul=m2 + ``` + + will be consider as tow target boars same as below: + + ``` + riscv-sim/-march=rv64gcv/-mabi=lp64d/-mcmodel=medlow/--param=riscv-autovec-lmul=dynamic/--param=riscv-autovec-preference=fixed-vlmax + riscv-sim/-march=rv64gcv/-mabi=lp64d/-mcmodel=medlow/--param=riscv-autovec-lmul=m2 + ``` + ### LLVM / clang LLVM can be used in combination with the RISC-V GNU Compiler Toolchain diff --git a/binutils b/binutils index 675b9d612cc..49f6117f958 160000 --- a/binutils +++ b/binutils @@ -1 +1 @@ -Subproject commit 675b9d612cc59446e84e2c6d89b45500cb603a8d +Subproject commit 49f6117f958cbd22ff93e4ce777a93d9802a402a diff --git a/glibc b/glibc index a704fd9a133..36f2487f13e 160000 --- a/glibc +++ b/glibc @@ -1 +1 @@ -Subproject commit a704fd9a133bfb10510e18702f48a6a9c88dbbd5 +Subproject commit 36f2487f13e3540be9ee0fb51876b1da72176d3f diff --git a/linux-headers/include/asm-generic/bitsperlong.h b/linux-headers/include/asm-generic/bitsperlong.h index 0aac245b6bd..75f320fa91e 100644 --- a/linux-headers/include/asm-generic/bitsperlong.h +++ b/linux-headers/include/asm-generic/bitsperlong.h @@ -2,6 +2,17 @@ #ifndef __ASM_GENERIC_BITS_PER_LONG #define __ASM_GENERIC_BITS_PER_LONG +#ifndef __BITS_PER_LONG +/* + * In order to keep safe and avoid regression, only unify uapi + * bitsperlong.h for some archs which are using newer toolchains + * that have the definitions of __CHAR_BIT__ and __SIZEOF_LONG__. + * See the following link for more info: + * https://lore.kernel.org/linux-arch/b9624545-2c80-49a1-ac3c-39264a591f7b@app.fastmail.com/ + */ +#if defined(__CHAR_BIT__) && defined(__SIZEOF_LONG__) +#define __BITS_PER_LONG (__CHAR_BIT__ * __SIZEOF_LONG__) +#else /* * There seems to be no way of detecting this automatically from user * space, so 64 bit architectures should override this in their @@ -9,8 +20,8 @@ * both 32 and 64 bit user space must not rely on CONFIG_64BIT * to decide it, but rather check a compiler provided macro. */ -#ifndef __BITS_PER_LONG #define __BITS_PER_LONG 32 #endif +#endif #endif /* __ASM_GENERIC_BITS_PER_LONG */ diff --git a/linux-headers/include/asm-generic/fcntl.h b/linux-headers/include/asm-generic/fcntl.h index 9dc0bf0c5a6..80f37a0d40d 100644 --- a/linux-headers/include/asm-generic/fcntl.h +++ b/linux-headers/include/asm-generic/fcntl.h @@ -91,7 +91,6 @@ /* a horrid kludge trying to make sure that this will fail on old kernels */ #define O_TMPFILE (__O_TMPFILE | O_DIRECTORY) -#define O_TMPFILE_MASK (__O_TMPFILE | O_DIRECTORY | O_CREAT) #ifndef O_NDELAY #define O_NDELAY O_NONBLOCK @@ -116,13 +115,13 @@ #define F_GETSIG 11 /* for sockets. */ #endif -#ifndef CONFIG_64BIT +#if __BITS_PER_LONG == 32 || defined(__KERNEL__) #ifndef F_GETLK64 #define F_GETLK64 12 /* using 'struct flock64' */ #define F_SETLK64 13 #define F_SETLKW64 14 #endif -#endif +#endif /* __BITS_PER_LONG == 32 || defined(__KERNEL__) */ #ifndef F_SETOWN_EX #define F_SETOWN_EX 15 @@ -181,6 +180,10 @@ struct f_owner_ex { blocking */ #define LOCK_UN 8 /* remove lock */ +/* + * LOCK_MAND support has been removed from the kernel. We leave the symbols + * here to not break legacy builds, but these should not be used in new code. + */ #define LOCK_MAND 32 /* This is a mandatory flock ... */ #define LOCK_READ 64 /* which allows concurrent read operations */ #define LOCK_WRITE 128 /* which allows concurrent write operations */ @@ -189,24 +192,19 @@ struct f_owner_ex { #define F_LINUX_SPECIFIC_BASE 1024 #ifndef HAVE_ARCH_STRUCT_FLOCK -#ifndef __ARCH_FLOCK_PAD -#define __ARCH_FLOCK_PAD -#endif - struct flock { short l_type; short l_whence; __kernel_off_t l_start; __kernel_off_t l_len; __kernel_pid_t l_pid; - __ARCH_FLOCK_PAD -}; +#ifdef __ARCH_FLOCK_EXTRA_SYSID + __ARCH_FLOCK_EXTRA_SYSID #endif - -#ifndef HAVE_ARCH_STRUCT_FLOCK64 -#ifndef __ARCH_FLOCK64_PAD -#define __ARCH_FLOCK64_PAD +#ifdef __ARCH_FLOCK_PAD + __ARCH_FLOCK_PAD #endif +}; struct flock64 { short l_type; @@ -214,8 +212,10 @@ struct flock64 { __kernel_loff_t l_start; __kernel_loff_t l_len; __kernel_pid_t l_pid; +#ifdef __ARCH_FLOCK64_PAD __ARCH_FLOCK64_PAD -}; #endif +}; +#endif /* HAVE_ARCH_STRUCT_FLOCK */ #endif /* _ASM_GENERIC_FCNTL_H */ diff --git a/linux-headers/include/asm-generic/hugetlb_encode.h b/linux-headers/include/asm-generic/hugetlb_encode.h index 4f3d5aaa11f..de687009bfe 100644 --- a/linux-headers/include/asm-generic/hugetlb_encode.h +++ b/linux-headers/include/asm-generic/hugetlb_encode.h @@ -20,18 +20,18 @@ #define HUGETLB_FLAG_ENCODE_SHIFT 26 #define HUGETLB_FLAG_ENCODE_MASK 0x3f -#define HUGETLB_FLAG_ENCODE_16KB (14 << HUGETLB_FLAG_ENCODE_SHIFT) -#define HUGETLB_FLAG_ENCODE_64KB (16 << HUGETLB_FLAG_ENCODE_SHIFT) -#define HUGETLB_FLAG_ENCODE_512KB (19 << HUGETLB_FLAG_ENCODE_SHIFT) -#define HUGETLB_FLAG_ENCODE_1MB (20 << HUGETLB_FLAG_ENCODE_SHIFT) -#define HUGETLB_FLAG_ENCODE_2MB (21 << HUGETLB_FLAG_ENCODE_SHIFT) -#define HUGETLB_FLAG_ENCODE_8MB (23 << HUGETLB_FLAG_ENCODE_SHIFT) -#define HUGETLB_FLAG_ENCODE_16MB (24 << HUGETLB_FLAG_ENCODE_SHIFT) -#define HUGETLB_FLAG_ENCODE_32MB (25 << HUGETLB_FLAG_ENCODE_SHIFT) -#define HUGETLB_FLAG_ENCODE_256MB (28 << HUGETLB_FLAG_ENCODE_SHIFT) -#define HUGETLB_FLAG_ENCODE_512MB (29 << HUGETLB_FLAG_ENCODE_SHIFT) -#define HUGETLB_FLAG_ENCODE_1GB (30 << HUGETLB_FLAG_ENCODE_SHIFT) -#define HUGETLB_FLAG_ENCODE_2GB (31 << HUGETLB_FLAG_ENCODE_SHIFT) -#define HUGETLB_FLAG_ENCODE_16GB (34 << HUGETLB_FLAG_ENCODE_SHIFT) +#define HUGETLB_FLAG_ENCODE_16KB (14U << HUGETLB_FLAG_ENCODE_SHIFT) +#define HUGETLB_FLAG_ENCODE_64KB (16U << HUGETLB_FLAG_ENCODE_SHIFT) +#define HUGETLB_FLAG_ENCODE_512KB (19U << HUGETLB_FLAG_ENCODE_SHIFT) +#define HUGETLB_FLAG_ENCODE_1MB (20U << HUGETLB_FLAG_ENCODE_SHIFT) +#define HUGETLB_FLAG_ENCODE_2MB (21U << HUGETLB_FLAG_ENCODE_SHIFT) +#define HUGETLB_FLAG_ENCODE_8MB (23U << HUGETLB_FLAG_ENCODE_SHIFT) +#define HUGETLB_FLAG_ENCODE_16MB (24U << HUGETLB_FLAG_ENCODE_SHIFT) +#define HUGETLB_FLAG_ENCODE_32MB (25U << HUGETLB_FLAG_ENCODE_SHIFT) +#define HUGETLB_FLAG_ENCODE_256MB (28U << HUGETLB_FLAG_ENCODE_SHIFT) +#define HUGETLB_FLAG_ENCODE_512MB (29U << HUGETLB_FLAG_ENCODE_SHIFT) +#define HUGETLB_FLAG_ENCODE_1GB (30U << HUGETLB_FLAG_ENCODE_SHIFT) +#define HUGETLB_FLAG_ENCODE_2GB (31U << HUGETLB_FLAG_ENCODE_SHIFT) +#define HUGETLB_FLAG_ENCODE_16GB (34U << HUGETLB_FLAG_ENCODE_SHIFT) #endif /* _ASM_GENERIC_HUGETLB_ENCODE_H_ */ diff --git a/linux-headers/include/asm-generic/mman-common.h b/linux-headers/include/asm-generic/mman-common.h index f94f65d429b..6ce1f1ceb43 100644 --- a/linux-headers/include/asm-generic/mman-common.h +++ b/linux-headers/include/asm-generic/mman-common.h @@ -72,6 +72,13 @@ #define MADV_COLD 20 /* deactivate these pages */ #define MADV_PAGEOUT 21 /* reclaim these pages */ +#define MADV_POPULATE_READ 22 /* populate (prefault) page tables readable */ +#define MADV_POPULATE_WRITE 23 /* populate (prefault) page tables writable */ + +#define MADV_DONTNEED_LOCKED 24 /* like DONTNEED, but drop locked pages too */ + +#define MADV_COLLAPSE 25 /* Synchronous hugepage collapse */ + /* compatibility flags */ #define MAP_FILE 0 diff --git a/linux-headers/include/asm-generic/poll.h b/linux-headers/include/asm-generic/poll.h index 0322a39bb83..69ab39b8746 100644 --- a/linux-headers/include/asm-generic/poll.h +++ b/linux-headers/include/asm-generic/poll.h @@ -29,7 +29,7 @@ #define POLLRDHUP 0x2000 #endif -#define POLLFREE (__poll_t)0x4000 /* currently only for epoll */ +#define POLLFREE (__poll_t)0x4000 #define POLL_BUSY_LOOP (__poll_t)0x8000 diff --git a/linux-headers/include/asm-generic/sembuf.h b/linux-headers/include/asm-generic/sembuf.h index 0e709bd3d73..f54e48fc91a 100644 --- a/linux-headers/include/asm-generic/sembuf.h +++ b/linux-headers/include/asm-generic/sembuf.h @@ -6,9 +6,9 @@ #include /* - * The semid64_ds structure for x86 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. + * The semid64_ds structure for most architectures (though it came from x86_32 + * originally). Note extra padding because this structure is passed back and + * forth between kernel and user space. * * semid64_ds was originally meant to be architecture specific, but * everyone just ended up making identical copies without specific diff --git a/linux-headers/include/asm-generic/shmbuf.h b/linux-headers/include/asm-generic/shmbuf.h index 2bab955e0fe..2979b6dd2c5 100644 --- a/linux-headers/include/asm-generic/shmbuf.h +++ b/linux-headers/include/asm-generic/shmbuf.h @@ -3,6 +3,8 @@ #define __ASM_GENERIC_SHMBUF_H #include +#include +#include /* * The shmid64_ds structure for x86 architecture. @@ -24,7 +26,7 @@ struct shmid64_ds { struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ + __kernel_size_t shm_segsz; /* size of segment (bytes) */ #if __BITS_PER_LONG == 64 long shm_atime; /* last attach time */ long shm_dtime; /* last detach time */ diff --git a/linux-headers/include/asm-generic/siginfo.h b/linux-headers/include/asm-generic/siginfo.h index 3813162f88d..af51be70257 100644 --- a/linux-headers/include/asm-generic/siginfo.h +++ b/linux-headers/include/asm-generic/siginfo.h @@ -29,6 +29,11 @@ typedef union sigval { #define __ARCH_SI_ATTRIBUTES #endif +/* + * Be careful when extending this union. On 32bit siginfo_t is 32bit + * aligned. Which means that a 64bit field or any other field that + * would increase the alignment of siginfo_t will break the ABI. + */ union __sifields { /* kill() */ struct { @@ -63,9 +68,6 @@ union __sifields { /* SIGILL, SIGFPE, SIGSEGV, SIGBUS, SIGTRAP, SIGEMT */ struct { void *_addr; /* faulting insn/memory ref. */ -#ifdef __ARCH_SI_TRAPNO - int _trapno; /* TRAP # which caused the signal */ -#endif #ifdef __ia64__ int _imm; /* immediate value for "break" */ unsigned int _flags; /* see ia64 si_flags */ @@ -75,6 +77,8 @@ union __sifields { #define __ADDR_BND_PKEY_PAD (__alignof__(void *) < sizeof(short) ? \ sizeof(short) : __alignof__(void *)) union { + /* used on alpha and sparc */ + int _trapno; /* TRAP # which caused the signal */ /* * used when si_code=BUS_MCEERR_AR or * used when si_code=BUS_MCEERR_AO @@ -91,6 +95,12 @@ union __sifields { char _dummy_pkey[__ADDR_BND_PKEY_PAD]; __u32 _pkey; } _addr_pkey; + /* used when si_code=TRAP_PERF */ + struct { + unsigned long _data; + __u32 _type; + __u32 _flags; + } _perf; }; } _sigfault; @@ -148,13 +158,14 @@ typedef struct siginfo { #define si_int _sifields._rt._sigval.sival_int #define si_ptr _sifields._rt._sigval.sival_ptr #define si_addr _sifields._sigfault._addr -#ifdef __ARCH_SI_TRAPNO #define si_trapno _sifields._sigfault._trapno -#endif #define si_addr_lsb _sifields._sigfault._addr_lsb #define si_lower _sifields._sigfault._addr_bnd._lower #define si_upper _sifields._sigfault._addr_bnd._upper #define si_pkey _sifields._sigfault._addr_pkey._pkey +#define si_perf_data _sifields._sigfault._perf._data +#define si_perf_type _sifields._sigfault._perf._type +#define si_perf_flags _sifields._sigfault._perf._flags #define si_band _sifields._sigpoll._band #define si_fd _sifields._sigpoll._fd #define si_call_addr _sifields._sigsys._call_addr @@ -231,7 +242,8 @@ typedef struct siginfo { #define SEGV_ADIPERR 7 /* Precise MCD exception */ #define SEGV_MTEAERR 8 /* Asynchronous ARM MTE error */ #define SEGV_MTESERR 9 /* Synchronous ARM MTE exception */ -#define NSIGSEGV 9 +#define SEGV_CPERR 10 /* Control protection fault */ +#define NSIGSEGV 10 /* * SIGBUS si_codes @@ -253,13 +265,19 @@ typedef struct siginfo { #define TRAP_BRANCH 3 /* process taken branch trap */ #define TRAP_HWBKPT 4 /* hardware breakpoint/watchpoint */ #define TRAP_UNK 5 /* undiagnosed trap */ -#define NSIGTRAP 5 +#define TRAP_PERF 6 /* perf event with sigtrap=1 */ +#define NSIGTRAP 6 /* * There is an additional set of SIGTRAP si_codes used by ptrace * that are of the form: ((PTRACE_EVENT_XXX << 8) | SIGTRAP) */ +/* + * Flags for si_perf_flags if SIGTRAP si_code is TRAP_PERF. + */ +#define TRAP_PERF_FLAG_ASYNC (1u << 0) + /* * SIGCHLD si_codes */ @@ -286,7 +304,8 @@ typedef struct siginfo { * SIGSYS si_codes */ #define SYS_SECCOMP 1 /* seccomp triggered */ -#define NSIGSYS 1 +#define SYS_USER_DISPATCH 2 /* syscall user dispatch triggered */ +#define NSIGSYS 2 /* * SIGEMT si_codes diff --git a/linux-headers/include/asm-generic/signal-defs.h b/linux-headers/include/asm-generic/signal-defs.h index ce359fffc6c..08c3efda34e 100644 --- a/linux-headers/include/asm-generic/signal-defs.h +++ b/linux-headers/include/asm-generic/signal-defs.h @@ -4,6 +4,70 @@ +/* + * SA_FLAGS values: + * + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_SIGINFO delivers the signal with SIGINFO structs. + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NODEFER prevents the current signal from being masked in the handler. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_UNSUPPORTED is a flag bit that will never be supported. Kernels from + * before the introduction of SA_UNSUPPORTED did not clear unknown bits from + * sa_flags when read using the oldact argument to sigaction and rt_sigaction, + * so this bit allows flag bit support to be detected from userspace while + * allowing an old kernel to be distinguished from a kernel that supports every + * flag bit. + * SA_EXPOSE_TAGBITS exposes an architecture-defined set of tag bits in + * siginfo.si_addr. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#ifndef SA_NOCLDSTOP +#define SA_NOCLDSTOP 0x00000001 +#endif +#ifndef SA_NOCLDWAIT +#define SA_NOCLDWAIT 0x00000002 +#endif +#ifndef SA_SIGINFO +#define SA_SIGINFO 0x00000004 +#endif +/* 0x00000008 used on alpha, mips, parisc */ +/* 0x00000010 used on alpha, parisc */ +/* 0x00000020 used on alpha, parisc, sparc */ +/* 0x00000040 used on alpha, parisc */ +/* 0x00000080 used on parisc */ +/* 0x00000100 used on sparc */ +/* 0x00000200 used on sparc */ +#define SA_UNSUPPORTED 0x00000400 +#define SA_EXPOSE_TAGBITS 0x00000800 +/* 0x00010000 used on mips */ +/* 0x00800000 used for internal SA_IMMUTABLE */ +/* 0x01000000 used on x86 */ +/* 0x02000000 used on x86 */ +/* + * New architectures should not define the obsolete + * SA_RESTORER 0x04000000 + */ +#ifndef SA_ONSTACK +#define SA_ONSTACK 0x08000000 +#endif +#ifndef SA_RESTART +#define SA_RESTART 0x10000000 +#endif +#ifndef SA_NODEFER +#define SA_NODEFER 0x40000000 +#endif +#ifndef SA_RESETHAND +#define SA_RESETHAND 0x80000000 +#endif + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + #ifndef SIG_BLOCK #define SIG_BLOCK 0 /* for blocking signals */ #endif diff --git a/linux-headers/include/asm-generic/signal.h b/linux-headers/include/asm-generic/signal.h index 0633aea2bc9..219c078a0f6 100644 --- a/linux-headers/include/asm-generic/signal.h +++ b/linux-headers/include/asm-generic/signal.h @@ -52,35 +52,6 @@ #define SIGRTMAX _NSIG #endif -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001 -#define SA_NOCLDWAIT 0x00000002 -#define SA_SIGINFO 0x00000004 -#define SA_ONSTACK 0x08000000 -#define SA_RESTART 0x10000000 -#define SA_NODEFER 0x40000000 -#define SA_RESETHAND 0x80000000 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -/* - * New architectures should not define the obsolete - * SA_RESTORER 0x04000000 - */ - #if !defined MINSIGSTKSZ || !defined SIGSTKSZ #define MINSIGSTKSZ 2048 #define SIGSTKSZ 8192 @@ -112,7 +83,7 @@ struct sigaction { typedef struct sigaltstack { void *ss_sp; int ss_flags; - size_t ss_size; + __kernel_size_t ss_size; } stack_t; #endif /* __ASSEMBLY__ */ diff --git a/linux-headers/include/asm-generic/socket.h b/linux-headers/include/asm-generic/socket.h index 370fa1109ec..70bd55060bb 100644 --- a/linux-headers/include/asm-generic/socket.h +++ b/linux-headers/include/asm-generic/socket.h @@ -119,6 +119,22 @@ #define SO_DETACH_REUSEPORT_BPF 68 +#define SO_PREFER_BUSY_POLL 69 +#define SO_BUSY_POLL_BUDGET 70 + +#define SO_NETNS_COOKIE 71 + +#define SO_BUF_LOCK 72 + +#define SO_RESERVE_MEM 73 + +#define SO_TXREHASH 74 + +#define SO_RCVMARK 75 + +#define SO_PASSPIDFD 76 +#define SO_PEERPIDFD 77 + #if __BITS_PER_LONG == 64 || (defined(__x86_64__) && defined(__ILP32__)) /* on 64-bit and x32, avoid the ?: operator */ diff --git a/linux-headers/include/asm-generic/termbits-common.h b/linux-headers/include/asm-generic/termbits-common.h new file mode 100644 index 00000000000..4a6a79f28b2 --- /dev/null +++ b/linux-headers/include/asm-generic/termbits-common.h @@ -0,0 +1,66 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __ASM_GENERIC_TERMBITS_COMMON_H +#define __ASM_GENERIC_TERMBITS_COMMON_H + +typedef unsigned char cc_t; +typedef unsigned int speed_t; + +/* c_iflag bits */ +#define IGNBRK 0x001 /* Ignore break condition */ +#define BRKINT 0x002 /* Signal interrupt on break */ +#define IGNPAR 0x004 /* Ignore characters with parity errors */ +#define PARMRK 0x008 /* Mark parity and framing errors */ +#define INPCK 0x010 /* Enable input parity check */ +#define ISTRIP 0x020 /* Strip 8th bit off characters */ +#define INLCR 0x040 /* Map NL to CR on input */ +#define IGNCR 0x080 /* Ignore CR */ +#define ICRNL 0x100 /* Map CR to NL on input */ +#define IXANY 0x800 /* Any character will restart after stop */ + +/* c_oflag bits */ +#define OPOST 0x01 /* Perform output processing */ +#define OCRNL 0x08 +#define ONOCR 0x10 +#define ONLRET 0x20 +#define OFILL 0x40 +#define OFDEL 0x80 + +/* c_cflag bit meaning */ +/* Common CBAUD rates */ +#define B0 0x00000000 /* hang up */ +#define B50 0x00000001 +#define B75 0x00000002 +#define B110 0x00000003 +#define B134 0x00000004 +#define B150 0x00000005 +#define B200 0x00000006 +#define B300 0x00000007 +#define B600 0x00000008 +#define B1200 0x00000009 +#define B1800 0x0000000a +#define B2400 0x0000000b +#define B4800 0x0000000c +#define B9600 0x0000000d +#define B19200 0x0000000e +#define B38400 0x0000000f +#define EXTA B19200 +#define EXTB B38400 + +#define ADDRB 0x20000000 /* address bit */ +#define CMSPAR 0x40000000 /* mark or space (stick) parity */ +#define CRTSCTS 0x80000000 /* flow control */ + +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ + +/* tcflow() ACTION argument and TCXONC use these */ +#define TCOOFF 0 /* Suspend output */ +#define TCOON 1 /* Restart suspended output */ +#define TCIOFF 2 /* Send a STOP character */ +#define TCION 3 /* Send a START character */ + +/* tcflush() QUEUE_SELECTOR argument and TCFLSH use these */ +#define TCIFLUSH 0 /* Discard data received but not yet read */ +#define TCOFLUSH 1 /* Discard data written but not yet sent */ +#define TCIOFLUSH 2 /* Discard all pending data */ + +#endif /* __ASM_GENERIC_TERMBITS_COMMON_H */ diff --git a/linux-headers/include/asm-generic/termbits.h b/linux-headers/include/asm-generic/termbits.h index 2fbaf9ae89d..890ef29053e 100644 --- a/linux-headers/include/asm-generic/termbits.h +++ b/linux-headers/include/asm-generic/termbits.h @@ -2,10 +2,8 @@ #ifndef __ASM_GENERIC_TERMBITS_H #define __ASM_GENERIC_TERMBITS_H -#include +#include -typedef unsigned char cc_t; -typedef unsigned int speed_t; typedef unsigned int tcflag_t; #define NCCS 19 @@ -41,156 +39,107 @@ struct ktermios { }; /* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 /* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 +#define IUCLC 0x0200 +#define IXON 0x0400 +#define IXOFF 0x1000 +#define IMAXBEL 0x2000 +#define IUTF8 0x4000 /* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 +#define OLCUC 0x00002 +#define ONLCR 0x00004 +#define NLDLY 0x00100 +#define NL0 0x00000 +#define NL1 0x00100 +#define CRDLY 0x00600 +#define CR0 0x00000 +#define CR1 0x00200 +#define CR2 0x00400 +#define CR3 0x00600 +#define TABDLY 0x01800 +#define TAB0 0x00000 +#define TAB1 0x00800 +#define TAB2 0x01000 +#define TAB3 0x01800 +#define XTABS 0x01800 +#define BSDLY 0x02000 +#define BS0 0x00000 +#define BS1 0x02000 +#define VTDLY 0x04000 +#define VT0 0x00000 +#define VT1 0x04000 +#define FFDLY 0x08000 +#define FF0 0x00000 +#define FF1 0x08000 /* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ +#define CBAUD 0x0000100f +#define CSIZE 0x00000030 +#define CS5 0x00000000 +#define CS6 0x00000010 +#define CS7 0x00000020 +#define CS8 0x00000030 +#define CSTOPB 0x00000040 +#define CREAD 0x00000080 +#define PARENB 0x00000100 +#define PARODD 0x00000200 +#define HUPCL 0x00000400 +#define CLOCAL 0x00000800 +#define CBAUDEX 0x00001000 +#define BOTHER 0x00001000 +#define B57600 0x00001001 +#define B115200 0x00001002 +#define B230400 0x00001003 +#define B460800 0x00001004 +#define B500000 0x00001005 +#define B576000 0x00001006 +#define B921600 0x00001007 +#define B1000000 0x00001008 +#define B1152000 0x00001009 +#define B1500000 0x0000100a +#define B2000000 0x0000100b +#define B2500000 0x0000100c +#define B3000000 0x0000100d +#define B3500000 0x0000100e +#define B4000000 0x0000100f +#define CIBAUD 0x100f0000 /* input baud rate */ /* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 -#define EXTPROC 0200000 - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 +#define ISIG 0x00001 +#define ICANON 0x00002 +#define XCASE 0x00004 +#define ECHO 0x00008 +#define ECHOE 0x00010 +#define ECHOK 0x00020 +#define ECHONL 0x00040 +#define NOFLSH 0x00080 +#define TOSTOP 0x00100 +#define ECHOCTL 0x00200 +#define ECHOPRT 0x00400 +#define ECHOKE 0x00800 +#define FLUSHO 0x01000 +#define PENDIN 0x04000 +#define IEXTEN 0x08000 +#define EXTPROC 0x10000 /* tcsetattr uses these */ #define TCSANOW 0 diff --git a/linux-headers/include/asm-generic/unistd.h b/linux-headers/include/asm-generic/unistd.h index 2056318988f..abe087c53b4 100644 --- a/linux-headers/include/asm-generic/unistd.h +++ b/linux-headers/include/asm-generic/unistd.h @@ -38,12 +38,12 @@ __SYSCALL(__NR_io_destroy, sys_io_destroy) __SC_COMP(__NR_io_submit, sys_io_submit, compat_sys_io_submit) #define __NR_io_cancel 3 __SYSCALL(__NR_io_cancel, sys_io_cancel) + #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_io_getevents 4 __SC_3264(__NR_io_getevents, sys_io_getevents_time32, sys_io_getevents) #endif -/* fs/xattr.c */ #define __NR_setxattr 5 __SYSCALL(__NR_setxattr, sys_setxattr) #define __NR_lsetxattr 6 @@ -68,58 +68,38 @@ __SYSCALL(__NR_removexattr, sys_removexattr) __SYSCALL(__NR_lremovexattr, sys_lremovexattr) #define __NR_fremovexattr 16 __SYSCALL(__NR_fremovexattr, sys_fremovexattr) - -/* fs/dcache.c */ #define __NR_getcwd 17 __SYSCALL(__NR_getcwd, sys_getcwd) - -/* fs/cookies.c */ #define __NR_lookup_dcookie 18 __SC_COMP(__NR_lookup_dcookie, sys_lookup_dcookie, compat_sys_lookup_dcookie) - -/* fs/eventfd.c */ #define __NR_eventfd2 19 __SYSCALL(__NR_eventfd2, sys_eventfd2) - -/* fs/eventpoll.c */ #define __NR_epoll_create1 20 __SYSCALL(__NR_epoll_create1, sys_epoll_create1) #define __NR_epoll_ctl 21 __SYSCALL(__NR_epoll_ctl, sys_epoll_ctl) #define __NR_epoll_pwait 22 __SC_COMP(__NR_epoll_pwait, sys_epoll_pwait, compat_sys_epoll_pwait) - -/* fs/fcntl.c */ #define __NR_dup 23 __SYSCALL(__NR_dup, sys_dup) #define __NR_dup3 24 __SYSCALL(__NR_dup3, sys_dup3) #define __NR3264_fcntl 25 __SC_COMP_3264(__NR3264_fcntl, sys_fcntl64, sys_fcntl, compat_sys_fcntl64) - -/* fs/inotify_user.c */ #define __NR_inotify_init1 26 __SYSCALL(__NR_inotify_init1, sys_inotify_init1) #define __NR_inotify_add_watch 27 __SYSCALL(__NR_inotify_add_watch, sys_inotify_add_watch) #define __NR_inotify_rm_watch 28 __SYSCALL(__NR_inotify_rm_watch, sys_inotify_rm_watch) - -/* fs/ioctl.c */ #define __NR_ioctl 29 __SC_COMP(__NR_ioctl, sys_ioctl, compat_sys_ioctl) - -/* fs/ioprio.c */ #define __NR_ioprio_set 30 __SYSCALL(__NR_ioprio_set, sys_ioprio_set) #define __NR_ioprio_get 31 __SYSCALL(__NR_ioprio_get, sys_ioprio_get) - -/* fs/locks.c */ #define __NR_flock 32 __SYSCALL(__NR_flock, sys_flock) - -/* fs/namei.c */ #define __NR_mknodat 33 __SYSCALL(__NR_mknodat, sys_mknodat) #define __NR_mkdirat 34 @@ -130,25 +110,21 @@ __SYSCALL(__NR_unlinkat, sys_unlinkat) __SYSCALL(__NR_symlinkat, sys_symlinkat) #define __NR_linkat 37 __SYSCALL(__NR_linkat, sys_linkat) + #ifdef __ARCH_WANT_RENAMEAT /* renameat is superseded with flags by renameat2 */ #define __NR_renameat 38 __SYSCALL(__NR_renameat, sys_renameat) #endif /* __ARCH_WANT_RENAMEAT */ -/* fs/namespace.c */ #define __NR_umount2 39 __SYSCALL(__NR_umount2, sys_umount) #define __NR_mount 40 __SYSCALL(__NR_mount, sys_mount) #define __NR_pivot_root 41 __SYSCALL(__NR_pivot_root, sys_pivot_root) - -/* fs/nfsctl.c */ #define __NR_nfsservctl 42 __SYSCALL(__NR_nfsservctl, sys_ni_syscall) - -/* fs/open.c */ #define __NR3264_statfs 43 __SC_COMP_3264(__NR3264_statfs, sys_statfs64, sys_statfs, \ compat_sys_statfs64) @@ -161,7 +137,6 @@ __SC_COMP_3264(__NR3264_truncate, sys_truncate64, sys_truncate, \ #define __NR3264_ftruncate 46 __SC_COMP_3264(__NR3264_ftruncate, sys_ftruncate64, sys_ftruncate, \ compat_sys_ftruncate64) - #define __NR_fallocate 47 __SC_COMP(__NR_fallocate, sys_fallocate, compat_sys_fallocate) #define __NR_faccessat 48 @@ -186,20 +161,12 @@ __SYSCALL(__NR_openat, sys_openat) __SYSCALL(__NR_close, sys_close) #define __NR_vhangup 58 __SYSCALL(__NR_vhangup, sys_vhangup) - -/* fs/pipe.c */ #define __NR_pipe2 59 __SYSCALL(__NR_pipe2, sys_pipe2) - -/* fs/quota.c */ #define __NR_quotactl 60 __SYSCALL(__NR_quotactl, sys_quotactl) - -/* fs/readdir.c */ #define __NR_getdents64 61 __SYSCALL(__NR_getdents64, sys_getdents64) - -/* fs/read_write.c */ #define __NR3264_lseek 62 __SC_3264(__NR3264_lseek, sys_llseek, sys_lseek) #define __NR_read 63 @@ -218,12 +185,9 @@ __SC_COMP(__NR_pwrite64, sys_pwrite64, compat_sys_pwrite64) __SC_COMP(__NR_preadv, sys_preadv, compat_sys_preadv) #define __NR_pwritev 70 __SC_COMP(__NR_pwritev, sys_pwritev, compat_sys_pwritev) - -/* fs/sendfile.c */ #define __NR3264_sendfile 71 __SYSCALL(__NR3264_sendfile, sys_sendfile64) -/* fs/select.c */ #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_pselect6 72 __SC_COMP_3264(__NR_pselect6, sys_pselect6_time32, sys_pselect6, compat_sys_pselect6_time32) @@ -231,21 +195,17 @@ __SC_COMP_3264(__NR_pselect6, sys_pselect6_time32, sys_pselect6, compat_sys_psel __SC_COMP_3264(__NR_ppoll, sys_ppoll_time32, sys_ppoll, compat_sys_ppoll_time32) #endif -/* fs/signalfd.c */ #define __NR_signalfd4 74 __SC_COMP(__NR_signalfd4, sys_signalfd4, compat_sys_signalfd4) - -/* fs/splice.c */ #define __NR_vmsplice 75 __SYSCALL(__NR_vmsplice, sys_vmsplice) #define __NR_splice 76 __SYSCALL(__NR_splice, sys_splice) #define __NR_tee 77 __SYSCALL(__NR_tee, sys_tee) - -/* fs/stat.c */ #define __NR_readlinkat 78 __SYSCALL(__NR_readlinkat, sys_readlinkat) + #if defined(__ARCH_WANT_NEW_STAT) || defined(__ARCH_WANT_STAT64) #define __NR3264_fstatat 79 __SC_3264(__NR3264_fstatat, sys_fstatat64, sys_newfstatat) @@ -253,13 +213,13 @@ __SC_3264(__NR3264_fstatat, sys_fstatat64, sys_newfstatat) __SC_3264(__NR3264_fstat, sys_fstat64, sys_newfstat) #endif -/* fs/sync.c */ #define __NR_sync 81 __SYSCALL(__NR_sync, sys_sync) #define __NR_fsync 82 __SYSCALL(__NR_fsync, sys_fsync) #define __NR_fdatasync 83 __SYSCALL(__NR_fdatasync, sys_fdatasync) + #ifdef __ARCH_WANT_SYNC_FILE_RANGE2 #define __NR_sync_file_range2 84 __SC_COMP(__NR_sync_file_range2, sys_sync_file_range2, \ @@ -270,9 +230,9 @@ __SC_COMP(__NR_sync_file_range, sys_sync_file_range, \ compat_sys_sync_file_range) #endif -/* fs/timerfd.c */ #define __NR_timerfd_create 85 __SYSCALL(__NR_timerfd_create, sys_timerfd_create) + #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_timerfd_settime 86 __SC_3264(__NR_timerfd_settime, sys_timerfd_settime32, \ @@ -282,45 +242,35 @@ __SC_3264(__NR_timerfd_gettime, sys_timerfd_gettime32, \ sys_timerfd_gettime) #endif -/* fs/utimes.c */ #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_utimensat 88 __SC_3264(__NR_utimensat, sys_utimensat_time32, sys_utimensat) #endif -/* kernel/acct.c */ #define __NR_acct 89 __SYSCALL(__NR_acct, sys_acct) - -/* kernel/capability.c */ #define __NR_capget 90 __SYSCALL(__NR_capget, sys_capget) #define __NR_capset 91 __SYSCALL(__NR_capset, sys_capset) - -/* kernel/exec_domain.c */ #define __NR_personality 92 __SYSCALL(__NR_personality, sys_personality) - -/* kernel/exit.c */ #define __NR_exit 93 __SYSCALL(__NR_exit, sys_exit) #define __NR_exit_group 94 __SYSCALL(__NR_exit_group, sys_exit_group) #define __NR_waitid 95 __SC_COMP(__NR_waitid, sys_waitid, compat_sys_waitid) - -/* kernel/fork.c */ #define __NR_set_tid_address 96 __SYSCALL(__NR_set_tid_address, sys_set_tid_address) #define __NR_unshare 97 __SYSCALL(__NR_unshare, sys_unshare) -/* kernel/futex.c */ #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_futex 98 __SC_3264(__NR_futex, sys_futex_time32, sys_futex) #endif + #define __NR_set_robust_list 99 __SC_COMP(__NR_set_robust_list, sys_set_robust_list, \ compat_sys_set_robust_list) @@ -328,43 +278,40 @@ __SC_COMP(__NR_set_robust_list, sys_set_robust_list, \ __SC_COMP(__NR_get_robust_list, sys_get_robust_list, \ compat_sys_get_robust_list) -/* kernel/hrtimer.c */ #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_nanosleep 101 __SC_3264(__NR_nanosleep, sys_nanosleep_time32, sys_nanosleep) #endif -/* kernel/itimer.c */ #define __NR_getitimer 102 __SC_COMP(__NR_getitimer, sys_getitimer, compat_sys_getitimer) #define __NR_setitimer 103 __SC_COMP(__NR_setitimer, sys_setitimer, compat_sys_setitimer) - -/* kernel/kexec.c */ #define __NR_kexec_load 104 __SC_COMP(__NR_kexec_load, sys_kexec_load, compat_sys_kexec_load) - -/* kernel/module.c */ #define __NR_init_module 105 __SYSCALL(__NR_init_module, sys_init_module) #define __NR_delete_module 106 __SYSCALL(__NR_delete_module, sys_delete_module) - -/* kernel/posix-timers.c */ #define __NR_timer_create 107 __SC_COMP(__NR_timer_create, sys_timer_create, compat_sys_timer_create) + #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_timer_gettime 108 __SC_3264(__NR_timer_gettime, sys_timer_gettime32, sys_timer_gettime) #endif + #define __NR_timer_getoverrun 109 __SYSCALL(__NR_timer_getoverrun, sys_timer_getoverrun) + #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_timer_settime 110 __SC_3264(__NR_timer_settime, sys_timer_settime32, sys_timer_settime) #endif + #define __NR_timer_delete 111 __SYSCALL(__NR_timer_delete, sys_timer_delete) + #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_clock_settime 112 __SC_3264(__NR_clock_settime, sys_clock_settime32, sys_clock_settime) @@ -377,15 +324,10 @@ __SC_3264(__NR_clock_nanosleep, sys_clock_nanosleep_time32, \ sys_clock_nanosleep) #endif -/* kernel/printk.c */ #define __NR_syslog 116 __SYSCALL(__NR_syslog, sys_syslog) - -/* kernel/ptrace.c */ #define __NR_ptrace 117 -__SYSCALL(__NR_ptrace, sys_ptrace) - -/* kernel/sched/core.c */ +__SC_COMP(__NR_ptrace, sys_ptrace, compat_sys_ptrace) #define __NR_sched_setparam 118 __SYSCALL(__NR_sched_setparam, sys_sched_setparam) #define __NR_sched_setscheduler 119 @@ -406,13 +348,13 @@ __SYSCALL(__NR_sched_yield, sys_sched_yield) __SYSCALL(__NR_sched_get_priority_max, sys_sched_get_priority_max) #define __NR_sched_get_priority_min 126 __SYSCALL(__NR_sched_get_priority_min, sys_sched_get_priority_min) + #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_sched_rr_get_interval 127 __SC_3264(__NR_sched_rr_get_interval, sys_sched_rr_get_interval_time32, \ sys_sched_rr_get_interval) #endif -/* kernel/signal.c */ #define __NR_restart_syscall 128 __SYSCALL(__NR_restart_syscall, sys_restart_syscall) #define __NR_kill 129 @@ -431,18 +373,18 @@ __SC_COMP(__NR_rt_sigaction, sys_rt_sigaction, compat_sys_rt_sigaction) __SC_COMP(__NR_rt_sigprocmask, sys_rt_sigprocmask, compat_sys_rt_sigprocmask) #define __NR_rt_sigpending 136 __SC_COMP(__NR_rt_sigpending, sys_rt_sigpending, compat_sys_rt_sigpending) + #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_rt_sigtimedwait 137 __SC_COMP_3264(__NR_rt_sigtimedwait, sys_rt_sigtimedwait_time32, \ sys_rt_sigtimedwait, compat_sys_rt_sigtimedwait_time32) #endif + #define __NR_rt_sigqueueinfo 138 __SC_COMP(__NR_rt_sigqueueinfo, sys_rt_sigqueueinfo, \ compat_sys_rt_sigqueueinfo) #define __NR_rt_sigreturn 139 __SC_COMP(__NR_rt_sigreturn, sys_rt_sigreturn, compat_sys_rt_sigreturn) - -/* kernel/sys.c */ #define __NR_setpriority 140 __SYSCALL(__NR_setpriority, sys_setpriority) #define __NR_getpriority 141 @@ -507,7 +449,6 @@ __SYSCALL(__NR_prctl, sys_prctl) #define __NR_getcpu 168 __SYSCALL(__NR_getcpu, sys_getcpu) -/* kernel/time.c */ #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_gettimeofday 169 __SC_COMP(__NR_gettimeofday, sys_gettimeofday, compat_sys_gettimeofday) @@ -517,7 +458,6 @@ __SC_COMP(__NR_settimeofday, sys_settimeofday, compat_sys_settimeofday) __SC_3264(__NR_adjtimex, sys_adjtimex_time32, sys_adjtimex) #endif -/* kernel/timer.c */ #define __NR_getpid 172 __SYSCALL(__NR_getpid, sys_getpid) #define __NR_getppid 173 @@ -534,12 +474,11 @@ __SYSCALL(__NR_getegid, sys_getegid) __SYSCALL(__NR_gettid, sys_gettid) #define __NR_sysinfo 179 __SC_COMP(__NR_sysinfo, sys_sysinfo, compat_sys_sysinfo) - -/* ipc/mqueue.c */ #define __NR_mq_open 180 __SC_COMP(__NR_mq_open, sys_mq_open, compat_sys_mq_open) #define __NR_mq_unlink 181 __SYSCALL(__NR_mq_unlink, sys_mq_unlink) + #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_mq_timedsend 182 __SC_3264(__NR_mq_timedsend, sys_mq_timedsend_time32, sys_mq_timedsend) @@ -547,12 +486,11 @@ __SC_3264(__NR_mq_timedsend, sys_mq_timedsend_time32, sys_mq_timedsend) __SC_3264(__NR_mq_timedreceive, sys_mq_timedreceive_time32, \ sys_mq_timedreceive) #endif + #define __NR_mq_notify 184 __SC_COMP(__NR_mq_notify, sys_mq_notify, compat_sys_mq_notify) #define __NR_mq_getsetattr 185 __SC_COMP(__NR_mq_getsetattr, sys_mq_getsetattr, compat_sys_mq_getsetattr) - -/* ipc/msg.c */ #define __NR_msgget 186 __SYSCALL(__NR_msgget, sys_msgget) #define __NR_msgctl 187 @@ -561,20 +499,18 @@ __SC_COMP(__NR_msgctl, sys_msgctl, compat_sys_msgctl) __SC_COMP(__NR_msgrcv, sys_msgrcv, compat_sys_msgrcv) #define __NR_msgsnd 189 __SC_COMP(__NR_msgsnd, sys_msgsnd, compat_sys_msgsnd) - -/* ipc/sem.c */ #define __NR_semget 190 __SYSCALL(__NR_semget, sys_semget) #define __NR_semctl 191 __SC_COMP(__NR_semctl, sys_semctl, compat_sys_semctl) + #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_semtimedop 192 __SC_3264(__NR_semtimedop, sys_semtimedop_time32, sys_semtimedop) #endif + #define __NR_semop 193 __SYSCALL(__NR_semop, sys_semop) - -/* ipc/shm.c */ #define __NR_shmget 194 __SYSCALL(__NR_shmget, sys_shmget) #define __NR_shmctl 195 @@ -583,8 +519,6 @@ __SC_COMP(__NR_shmctl, sys_shmctl, compat_sys_shmctl) __SC_COMP(__NR_shmat, sys_shmat, compat_sys_shmat) #define __NR_shmdt 197 __SYSCALL(__NR_shmdt, sys_shmdt) - -/* net/socket.c */ #define __NR_socket 198 __SYSCALL(__NR_socket, sys_socket) #define __NR_socketpair 199 @@ -615,40 +549,30 @@ __SYSCALL(__NR_shutdown, sys_shutdown) __SC_COMP(__NR_sendmsg, sys_sendmsg, compat_sys_sendmsg) #define __NR_recvmsg 212 __SC_COMP(__NR_recvmsg, sys_recvmsg, compat_sys_recvmsg) - -/* mm/filemap.c */ #define __NR_readahead 213 __SC_COMP(__NR_readahead, sys_readahead, compat_sys_readahead) - -/* mm/nommu.c, also with MMU */ #define __NR_brk 214 __SYSCALL(__NR_brk, sys_brk) #define __NR_munmap 215 __SYSCALL(__NR_munmap, sys_munmap) #define __NR_mremap 216 __SYSCALL(__NR_mremap, sys_mremap) - -/* security/keys/keyctl.c */ #define __NR_add_key 217 __SYSCALL(__NR_add_key, sys_add_key) #define __NR_request_key 218 __SYSCALL(__NR_request_key, sys_request_key) #define __NR_keyctl 219 __SC_COMP(__NR_keyctl, sys_keyctl, compat_sys_keyctl) - -/* arch/example/kernel/sys_example.c */ #define __NR_clone 220 __SYSCALL(__NR_clone, sys_clone) #define __NR_execve 221 __SC_COMP(__NR_execve, sys_execve, compat_sys_execve) - #define __NR3264_mmap 222 __SC_3264(__NR3264_mmap, sys_mmap2, sys_mmap) -/* mm/fadvise.c */ #define __NR3264_fadvise64 223 __SC_COMP(__NR3264_fadvise64, sys_fadvise64_64, compat_sys_fadvise64_64) -/* mm/, CONFIG_MMU only */ +/* CONFIG_MMU only */ #ifndef __ARCH_NOMMU #define __NR_swapon 224 __SYSCALL(__NR_swapon, sys_swapon) @@ -673,15 +597,15 @@ __SYSCALL(__NR_madvise, sys_madvise) #define __NR_remap_file_pages 234 __SYSCALL(__NR_remap_file_pages, sys_remap_file_pages) #define __NR_mbind 235 -__SC_COMP(__NR_mbind, sys_mbind, compat_sys_mbind) +__SYSCALL(__NR_mbind, sys_mbind) #define __NR_get_mempolicy 236 -__SC_COMP(__NR_get_mempolicy, sys_get_mempolicy, compat_sys_get_mempolicy) +__SYSCALL(__NR_get_mempolicy, sys_get_mempolicy) #define __NR_set_mempolicy 237 -__SC_COMP(__NR_set_mempolicy, sys_set_mempolicy, compat_sys_set_mempolicy) +__SYSCALL(__NR_set_mempolicy, sys_set_mempolicy) #define __NR_migrate_pages 238 -__SC_COMP(__NR_migrate_pages, sys_migrate_pages, compat_sys_migrate_pages) +__SYSCALL(__NR_migrate_pages, sys_migrate_pages) #define __NR_move_pages 239 -__SC_COMP(__NR_move_pages, sys_move_pages, compat_sys_move_pages) +__SYSCALL(__NR_move_pages, sys_move_pages) #endif #define __NR_rt_tgsigqueueinfo 240 @@ -691,6 +615,7 @@ __SC_COMP(__NR_rt_tgsigqueueinfo, sys_rt_tgsigqueueinfo, \ __SYSCALL(__NR_perf_event_open, sys_perf_event_open) #define __NR_accept4 242 __SYSCALL(__NR_accept4, sys_accept4) + #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_recvmmsg 243 __SC_COMP_3264(__NR_recvmmsg, sys_recvmmsg_time32, sys_recvmmsg, compat_sys_recvmmsg_time32) @@ -706,6 +631,7 @@ __SC_COMP_3264(__NR_recvmmsg, sys_recvmmsg_time32, sys_recvmmsg, compat_sys_recv #define __NR_wait4 260 __SC_COMP(__NR_wait4, sys_wait4, compat_sys_wait4) #endif + #define __NR_prlimit64 261 __SYSCALL(__NR_prlimit64, sys_prlimit64) #define __NR_fanotify_init 262 @@ -716,10 +642,12 @@ __SYSCALL(__NR_fanotify_mark, sys_fanotify_mark) __SYSCALL(__NR_name_to_handle_at, sys_name_to_handle_at) #define __NR_open_by_handle_at 265 __SYSCALL(__NR_open_by_handle_at, sys_open_by_handle_at) + #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_clock_adjtime 266 __SC_3264(__NR_clock_adjtime, sys_clock_adjtime32, sys_clock_adjtime) #endif + #define __NR_syncfs 267 __SYSCALL(__NR_syncfs, sys_syncfs) #define __NR_setns 268 @@ -770,16 +698,20 @@ __SYSCALL(__NR_pkey_alloc, sys_pkey_alloc) __SYSCALL(__NR_pkey_free, sys_pkey_free) #define __NR_statx 291 __SYSCALL(__NR_statx, sys_statx) + #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_io_pgetevents 292 __SC_COMP_3264(__NR_io_pgetevents, sys_io_pgetevents_time32, sys_io_pgetevents, compat_sys_io_pgetevents) #endif + #define __NR_rseq 293 __SYSCALL(__NR_rseq, sys_rseq) #define __NR_kexec_file_load 294 __SYSCALL(__NR_kexec_file_load, sys_kexec_file_load) + /* 295 through 402 are unassigned to sync up with generic numbers, don't use */ -#if __BITS_PER_LONG == 32 + +#if defined(__SYSCALL_COMPAT) || __BITS_PER_LONG == 32 #define __NR_clock_gettime64 403 __SYSCALL(__NR_clock_gettime64, sys_clock_gettime) #define __NR_clock_settime64 404 @@ -844,13 +776,14 @@ __SYSCALL(__NR_fsmount, sys_fsmount) __SYSCALL(__NR_fspick, sys_fspick) #define __NR_pidfd_open 434 __SYSCALL(__NR_pidfd_open, sys_pidfd_open) + #ifdef __ARCH_WANT_SYS_CLONE3 #define __NR_clone3 435 __SYSCALL(__NR_clone3, sys_clone3) #endif + #define __NR_close_range 436 __SYSCALL(__NR_close_range, sys_close_range) - #define __NR_openat2 437 __SYSCALL(__NR_openat2, sys_openat2) #define __NR_pidfd_getfd 438 @@ -859,9 +792,39 @@ __SYSCALL(__NR_pidfd_getfd, sys_pidfd_getfd) __SYSCALL(__NR_faccessat2, sys_faccessat2) #define __NR_process_madvise 440 __SYSCALL(__NR_process_madvise, sys_process_madvise) +#define __NR_epoll_pwait2 441 +__SC_COMP(__NR_epoll_pwait2, sys_epoll_pwait2, compat_sys_epoll_pwait2) +#define __NR_mount_setattr 442 +__SYSCALL(__NR_mount_setattr, sys_mount_setattr) +#define __NR_quotactl_fd 443 +__SYSCALL(__NR_quotactl_fd, sys_quotactl_fd) +#define __NR_landlock_create_ruleset 444 +__SYSCALL(__NR_landlock_create_ruleset, sys_landlock_create_ruleset) +#define __NR_landlock_add_rule 445 +__SYSCALL(__NR_landlock_add_rule, sys_landlock_add_rule) +#define __NR_landlock_restrict_self 446 +__SYSCALL(__NR_landlock_restrict_self, sys_landlock_restrict_self) + +#ifdef __ARCH_WANT_MEMFD_SECRET +#define __NR_memfd_secret 447 +__SYSCALL(__NR_memfd_secret, sys_memfd_secret) +#endif + +#define __NR_process_mrelease 448 +__SYSCALL(__NR_process_mrelease, sys_process_mrelease) +#define __NR_futex_waitv 449 +__SYSCALL(__NR_futex_waitv, sys_futex_waitv) +#define __NR_set_mempolicy_home_node 450 +__SYSCALL(__NR_set_mempolicy_home_node, sys_set_mempolicy_home_node) + +#define __NR_cachestat 451 +__SYSCALL(__NR_cachestat, sys_cachestat) + +#define __NR_fchmodat2 452 +__SYSCALL(__NR_fchmodat2, sys_fchmodat2) #undef __NR_syscalls -#define __NR_syscalls 441 +#define __NR_syscalls 453 /* * 32 bit systems traditionally used different diff --git a/linux-headers/include/asm/auxvec.h b/linux-headers/include/asm/auxvec.h index 82ae615fc39..bd5029334aa 100644 --- a/linux-headers/include/asm/auxvec.h +++ b/linux-headers/include/asm/auxvec.h @@ -30,8 +30,11 @@ #define AT_L1D_CACHEGEOMETRY 43 #define AT_L2_CACHESIZE 44 #define AT_L2_CACHEGEOMETRY 45 +#define AT_L3_CACHESIZE 46 +#define AT_L3_CACHEGEOMETRY 47 /* entries in ARCH_DLINFO */ -#define AT_VECTOR_SIZE_ARCH 7 +#define AT_VECTOR_SIZE_ARCH 9 +#define AT_MINSIGSTKSZ 51 #endif /* _ASM_RISCV_AUXVEC_H */ diff --git a/linux-headers/include/asm/hwcap.h b/linux-headers/include/asm/hwcap.h index 1aced157a05..80c7a0df3b3 100644 --- a/linux-headers/include/asm/hwcap.h +++ b/linux-headers/include/asm/hwcap.h @@ -21,5 +21,6 @@ #define COMPAT_HWCAP_ISA_F (1 << ('F' - 'A')) #define COMPAT_HWCAP_ISA_D (1 << ('D' - 'A')) #define COMPAT_HWCAP_ISA_C (1 << ('C' - 'A')) +#define COMPAT_HWCAP_ISA_V (1 << ('V' - 'A')) #endif /* _ASM_RISCV_HWCAP_H */ diff --git a/linux-headers/include/asm/hwprobe.h b/linux-headers/include/asm/hwprobe.h new file mode 100644 index 00000000000..2a9b0e98e1b --- /dev/null +++ b/linux-headers/include/asm/hwprobe.h @@ -0,0 +1,41 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Copyright 2023 Rivos, Inc + */ + +#ifndef _ASM_HWPROBE_H +#define _ASM_HWPROBE_H + +#include + +/* + * Interface for probing hardware capabilities from userspace, see + * Documentation/riscv/hwprobe.rst for more information. + */ +struct riscv_hwprobe { + __s64 key; + __u64 value; +}; + +#define RISCV_HWPROBE_KEY_MVENDORID 0 +#define RISCV_HWPROBE_KEY_MARCHID 1 +#define RISCV_HWPROBE_KEY_MIMPID 2 +#define RISCV_HWPROBE_KEY_BASE_BEHAVIOR 3 +#define RISCV_HWPROBE_BASE_BEHAVIOR_IMA (1 << 0) +#define RISCV_HWPROBE_KEY_IMA_EXT_0 4 +#define RISCV_HWPROBE_IMA_FD (1 << 0) +#define RISCV_HWPROBE_IMA_C (1 << 1) +#define RISCV_HWPROBE_IMA_V (1 << 2) +#define RISCV_HWPROBE_EXT_ZBA (1 << 3) +#define RISCV_HWPROBE_EXT_ZBB (1 << 4) +#define RISCV_HWPROBE_EXT_ZBS (1 << 5) +#define RISCV_HWPROBE_KEY_CPUPERF_0 5 +#define RISCV_HWPROBE_MISALIGNED_UNKNOWN (0 << 0) +#define RISCV_HWPROBE_MISALIGNED_EMULATED (1 << 0) +#define RISCV_HWPROBE_MISALIGNED_SLOW (2 << 0) +#define RISCV_HWPROBE_MISALIGNED_FAST (3 << 0) +#define RISCV_HWPROBE_MISALIGNED_UNSUPPORTED (4 << 0) +#define RISCV_HWPROBE_MISALIGNED_MASK (7 << 0) +/* Increase RISCV_HWPROBE_MAX_KEY when adding items. */ + +#endif diff --git a/linux-headers/include/asm/kvm.h b/linux-headers/include/asm/kvm.h new file mode 100644 index 00000000000..992c5e40710 --- /dev/null +++ b/linux-headers/include/asm/kvm.h @@ -0,0 +1,305 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Copyright (C) 2019 Western Digital Corporation or its affiliates. + * + * Authors: + * Anup Patel + */ + +#ifndef __LINUX_KVM_RISCV_H +#define __LINUX_KVM_RISCV_H + +#ifndef __ASSEMBLY__ + +#include +#include +#include + +#define __KVM_HAVE_IRQ_LINE +#define __KVM_HAVE_READONLY_MEM + +#define KVM_COALESCED_MMIO_PAGE_OFFSET 1 + +#define KVM_INTERRUPT_SET -1U +#define KVM_INTERRUPT_UNSET -2U + +/* for KVM_GET_REGS and KVM_SET_REGS */ +struct kvm_regs { +}; + +/* for KVM_GET_FPU and KVM_SET_FPU */ +struct kvm_fpu { +}; + +/* KVM Debug exit structure */ +struct kvm_debug_exit_arch { +}; + +/* for KVM_SET_GUEST_DEBUG */ +struct kvm_guest_debug_arch { +}; + +/* definition of registers in kvm_run */ +struct kvm_sync_regs { +}; + +/* for KVM_GET_SREGS and KVM_SET_SREGS */ +struct kvm_sregs { +}; + +/* CONFIG registers for KVM_GET_ONE_REG and KVM_SET_ONE_REG */ +struct kvm_riscv_config { + unsigned long isa; + unsigned long zicbom_block_size; + unsigned long mvendorid; + unsigned long marchid; + unsigned long mimpid; + unsigned long zicboz_block_size; + unsigned long satp_mode; +}; + +/* CORE registers for KVM_GET_ONE_REG and KVM_SET_ONE_REG */ +struct kvm_riscv_core { + struct user_regs_struct regs; + unsigned long mode; +}; + +/* Possible privilege modes for kvm_riscv_core */ +#define KVM_RISCV_MODE_S 1 +#define KVM_RISCV_MODE_U 0 + +/* General CSR registers for KVM_GET_ONE_REG and KVM_SET_ONE_REG */ +struct kvm_riscv_csr { + unsigned long sstatus; + unsigned long sie; + unsigned long stvec; + unsigned long sscratch; + unsigned long sepc; + unsigned long scause; + unsigned long stval; + unsigned long sip; + unsigned long satp; + unsigned long scounteren; +}; + +/* AIA CSR registers for KVM_GET_ONE_REG and KVM_SET_ONE_REG */ +struct kvm_riscv_aia_csr { + unsigned long siselect; + unsigned long iprio1; + unsigned long iprio2; + unsigned long sieh; + unsigned long siph; + unsigned long iprio1h; + unsigned long iprio2h; +}; + +/* TIMER registers for KVM_GET_ONE_REG and KVM_SET_ONE_REG */ +struct kvm_riscv_timer { + __u64 frequency; + __u64 time; + __u64 compare; + __u64 state; +}; + +/* + * ISA extension IDs specific to KVM. This is not the same as the host ISA + * extension IDs as that is internal to the host and should not be exposed + * to the guest. This should always be contiguous to keep the mapping simple + * in KVM implementation. + */ +enum KVM_RISCV_ISA_EXT_ID { + KVM_RISCV_ISA_EXT_A = 0, + KVM_RISCV_ISA_EXT_C, + KVM_RISCV_ISA_EXT_D, + KVM_RISCV_ISA_EXT_F, + KVM_RISCV_ISA_EXT_H, + KVM_RISCV_ISA_EXT_I, + KVM_RISCV_ISA_EXT_M, + KVM_RISCV_ISA_EXT_SVPBMT, + KVM_RISCV_ISA_EXT_SSTC, + KVM_RISCV_ISA_EXT_SVINVAL, + KVM_RISCV_ISA_EXT_ZIHINTPAUSE, + KVM_RISCV_ISA_EXT_ZICBOM, + KVM_RISCV_ISA_EXT_ZICBOZ, + KVM_RISCV_ISA_EXT_ZBB, + KVM_RISCV_ISA_EXT_SSAIA, + KVM_RISCV_ISA_EXT_V, + KVM_RISCV_ISA_EXT_SVNAPOT, + KVM_RISCV_ISA_EXT_ZBA, + KVM_RISCV_ISA_EXT_ZBS, + KVM_RISCV_ISA_EXT_ZICNTR, + KVM_RISCV_ISA_EXT_ZICSR, + KVM_RISCV_ISA_EXT_ZIFENCEI, + KVM_RISCV_ISA_EXT_ZIHPM, + KVM_RISCV_ISA_EXT_MAX, +}; + +/* + * SBI extension IDs specific to KVM. This is not the same as the SBI + * extension IDs defined by the RISC-V SBI specification. + */ +enum KVM_RISCV_SBI_EXT_ID { + KVM_RISCV_SBI_EXT_V01 = 0, + KVM_RISCV_SBI_EXT_TIME, + KVM_RISCV_SBI_EXT_IPI, + KVM_RISCV_SBI_EXT_RFENCE, + KVM_RISCV_SBI_EXT_SRST, + KVM_RISCV_SBI_EXT_HSM, + KVM_RISCV_SBI_EXT_PMU, + KVM_RISCV_SBI_EXT_EXPERIMENTAL, + KVM_RISCV_SBI_EXT_VENDOR, + KVM_RISCV_SBI_EXT_MAX, +}; + +/* Possible states for kvm_riscv_timer */ +#define KVM_RISCV_TIMER_STATE_OFF 0 +#define KVM_RISCV_TIMER_STATE_ON 1 + +#define KVM_REG_SIZE(id) \ + (1U << (((id) & KVM_REG_SIZE_MASK) >> KVM_REG_SIZE_SHIFT)) + +/* If you need to interpret the index values, here is the key: */ +#define KVM_REG_RISCV_TYPE_MASK 0x00000000FF000000 +#define KVM_REG_RISCV_TYPE_SHIFT 24 +#define KVM_REG_RISCV_SUBTYPE_MASK 0x0000000000FF0000 +#define KVM_REG_RISCV_SUBTYPE_SHIFT 16 + +/* Config registers are mapped as type 1 */ +#define KVM_REG_RISCV_CONFIG (0x01 << KVM_REG_RISCV_TYPE_SHIFT) +#define KVM_REG_RISCV_CONFIG_REG(name) \ + (offsetof(struct kvm_riscv_config, name) / sizeof(unsigned long)) + +/* Core registers are mapped as type 2 */ +#define KVM_REG_RISCV_CORE (0x02 << KVM_REG_RISCV_TYPE_SHIFT) +#define KVM_REG_RISCV_CORE_REG(name) \ + (offsetof(struct kvm_riscv_core, name) / sizeof(unsigned long)) + +/* Control and status registers are mapped as type 3 */ +#define KVM_REG_RISCV_CSR (0x03 << KVM_REG_RISCV_TYPE_SHIFT) +#define KVM_REG_RISCV_CSR_GENERAL (0x0 << KVM_REG_RISCV_SUBTYPE_SHIFT) +#define KVM_REG_RISCV_CSR_AIA (0x1 << KVM_REG_RISCV_SUBTYPE_SHIFT) +#define KVM_REG_RISCV_CSR_REG(name) \ + (offsetof(struct kvm_riscv_csr, name) / sizeof(unsigned long)) +#define KVM_REG_RISCV_CSR_AIA_REG(name) \ + (offsetof(struct kvm_riscv_aia_csr, name) / sizeof(unsigned long)) + +/* Timer registers are mapped as type 4 */ +#define KVM_REG_RISCV_TIMER (0x04 << KVM_REG_RISCV_TYPE_SHIFT) +#define KVM_REG_RISCV_TIMER_REG(name) \ + (offsetof(struct kvm_riscv_timer, name) / sizeof(__u64)) + +/* F extension registers are mapped as type 5 */ +#define KVM_REG_RISCV_FP_F (0x05 << KVM_REG_RISCV_TYPE_SHIFT) +#define KVM_REG_RISCV_FP_F_REG(name) \ + (offsetof(struct __riscv_f_ext_state, name) / sizeof(__u32)) + +/* D extension registers are mapped as type 6 */ +#define KVM_REG_RISCV_FP_D (0x06 << KVM_REG_RISCV_TYPE_SHIFT) +#define KVM_REG_RISCV_FP_D_REG(name) \ + (offsetof(struct __riscv_d_ext_state, name) / sizeof(__u64)) + +/* ISA Extension registers are mapped as type 7 */ +#define KVM_REG_RISCV_ISA_EXT (0x07 << KVM_REG_RISCV_TYPE_SHIFT) +#define KVM_REG_RISCV_ISA_SINGLE (0x0 << KVM_REG_RISCV_SUBTYPE_SHIFT) +#define KVM_REG_RISCV_ISA_MULTI_EN (0x1 << KVM_REG_RISCV_SUBTYPE_SHIFT) +#define KVM_REG_RISCV_ISA_MULTI_DIS (0x2 << KVM_REG_RISCV_SUBTYPE_SHIFT) +#define KVM_REG_RISCV_ISA_MULTI_REG(__ext_id) \ + ((__ext_id) / __BITS_PER_LONG) +#define KVM_REG_RISCV_ISA_MULTI_MASK(__ext_id) \ + (1UL << ((__ext_id) % __BITS_PER_LONG)) +#define KVM_REG_RISCV_ISA_MULTI_REG_LAST \ + KVM_REG_RISCV_ISA_MULTI_REG(KVM_RISCV_ISA_EXT_MAX - 1) + +/* SBI extension registers are mapped as type 8 */ +#define KVM_REG_RISCV_SBI_EXT (0x08 << KVM_REG_RISCV_TYPE_SHIFT) +#define KVM_REG_RISCV_SBI_SINGLE (0x0 << KVM_REG_RISCV_SUBTYPE_SHIFT) +#define KVM_REG_RISCV_SBI_MULTI_EN (0x1 << KVM_REG_RISCV_SUBTYPE_SHIFT) +#define KVM_REG_RISCV_SBI_MULTI_DIS (0x2 << KVM_REG_RISCV_SUBTYPE_SHIFT) +#define KVM_REG_RISCV_SBI_MULTI_REG(__ext_id) \ + ((__ext_id) / __BITS_PER_LONG) +#define KVM_REG_RISCV_SBI_MULTI_MASK(__ext_id) \ + (1UL << ((__ext_id) % __BITS_PER_LONG)) +#define KVM_REG_RISCV_SBI_MULTI_REG_LAST \ + KVM_REG_RISCV_SBI_MULTI_REG(KVM_RISCV_SBI_EXT_MAX - 1) + +/* V extension registers are mapped as type 9 */ +#define KVM_REG_RISCV_VECTOR (0x09 << KVM_REG_RISCV_TYPE_SHIFT) +#define KVM_REG_RISCV_VECTOR_CSR_REG(name) \ + (offsetof(struct __riscv_v_ext_state, name) / sizeof(unsigned long)) +#define KVM_REG_RISCV_VECTOR_REG(n) \ + ((n) + sizeof(struct __riscv_v_ext_state) / sizeof(unsigned long)) + +/* Device Control API: RISC-V AIA */ +#define KVM_DEV_RISCV_APLIC_ALIGN 0x1000 +#define KVM_DEV_RISCV_APLIC_SIZE 0x4000 +#define KVM_DEV_RISCV_APLIC_MAX_HARTS 0x4000 +#define KVM_DEV_RISCV_IMSIC_ALIGN 0x1000 +#define KVM_DEV_RISCV_IMSIC_SIZE 0x1000 + +#define KVM_DEV_RISCV_AIA_GRP_CONFIG 0 +#define KVM_DEV_RISCV_AIA_CONFIG_MODE 0 +#define KVM_DEV_RISCV_AIA_CONFIG_IDS 1 +#define KVM_DEV_RISCV_AIA_CONFIG_SRCS 2 +#define KVM_DEV_RISCV_AIA_CONFIG_GROUP_BITS 3 +#define KVM_DEV_RISCV_AIA_CONFIG_GROUP_SHIFT 4 +#define KVM_DEV_RISCV_AIA_CONFIG_HART_BITS 5 +#define KVM_DEV_RISCV_AIA_CONFIG_GUEST_BITS 6 + +/* + * Modes of RISC-V AIA device: + * 1) EMUL (aka Emulation): Trap-n-emulate IMSIC + * 2) HWACCEL (aka HW Acceleration): Virtualize IMSIC using IMSIC guest files + * 3) AUTO (aka Automatic): Virtualize IMSIC using IMSIC guest files whenever + * available otherwise fallback to trap-n-emulation + */ +#define KVM_DEV_RISCV_AIA_MODE_EMUL 0 +#define KVM_DEV_RISCV_AIA_MODE_HWACCEL 1 +#define KVM_DEV_RISCV_AIA_MODE_AUTO 2 + +#define KVM_DEV_RISCV_AIA_IDS_MIN 63 +#define KVM_DEV_RISCV_AIA_IDS_MAX 2048 +#define KVM_DEV_RISCV_AIA_SRCS_MAX 1024 +#define KVM_DEV_RISCV_AIA_GROUP_BITS_MAX 8 +#define KVM_DEV_RISCV_AIA_GROUP_SHIFT_MIN 24 +#define KVM_DEV_RISCV_AIA_GROUP_SHIFT_MAX 56 +#define KVM_DEV_RISCV_AIA_HART_BITS_MAX 16 +#define KVM_DEV_RISCV_AIA_GUEST_BITS_MAX 8 + +#define KVM_DEV_RISCV_AIA_GRP_ADDR 1 +#define KVM_DEV_RISCV_AIA_ADDR_APLIC 0 +#define KVM_DEV_RISCV_AIA_ADDR_IMSIC(__vcpu) (1 + (__vcpu)) +#define KVM_DEV_RISCV_AIA_ADDR_MAX \ + (1 + KVM_DEV_RISCV_APLIC_MAX_HARTS) + +#define KVM_DEV_RISCV_AIA_GRP_CTRL 2 +#define KVM_DEV_RISCV_AIA_CTRL_INIT 0 + +/* + * The device attribute type contains the memory mapped offset of the + * APLIC register (range 0x0000-0x3FFF) and it must be 4-byte aligned. + */ +#define KVM_DEV_RISCV_AIA_GRP_APLIC 3 + +/* + * The lower 12-bits of the device attribute type contains the iselect + * value of the IMSIC register (range 0x70-0xFF) whereas the higher order + * bits contains the VCPU id. + */ +#define KVM_DEV_RISCV_AIA_GRP_IMSIC 4 +#define KVM_DEV_RISCV_AIA_IMSIC_ISEL_BITS 12 +#define KVM_DEV_RISCV_AIA_IMSIC_ISEL_MASK \ + ((1U << KVM_DEV_RISCV_AIA_IMSIC_ISEL_BITS) - 1) +#define KVM_DEV_RISCV_AIA_IMSIC_MKATTR(__vcpu, __isel) \ + (((__vcpu) << KVM_DEV_RISCV_AIA_IMSIC_ISEL_BITS) | \ + ((__isel) & KVM_DEV_RISCV_AIA_IMSIC_ISEL_MASK)) +#define KVM_DEV_RISCV_AIA_IMSIC_GET_ISEL(__attr) \ + ((__attr) & KVM_DEV_RISCV_AIA_IMSIC_ISEL_MASK) +#define KVM_DEV_RISCV_AIA_IMSIC_GET_VCPU(__attr) \ + ((__attr) >> KVM_DEV_RISCV_AIA_IMSIC_ISEL_BITS) + +/* One single KVM irqchip, ie. the AIA */ +#define KVM_NR_IRQCHIPS 1 + +#endif + +#endif /* __LINUX_KVM_RISCV_H */ diff --git a/linux-headers/include/asm/ptrace.h b/linux-headers/include/asm/ptrace.h index a5e1677272b..1e3166caca8 100644 --- a/linux-headers/include/asm/ptrace.h +++ b/linux-headers/include/asm/ptrace.h @@ -10,6 +10,11 @@ #include +#define PTRACE_GETFDPIC 33 + +#define PTRACE_GETFDPIC_EXEC 0 +#define PTRACE_GETFDPIC_INTERP 1 + /* * User-mode register state for core dumps, ptrace, sigcontext * @@ -71,12 +76,57 @@ struct __riscv_q_ext_state { __u32 reserved[3]; }; +struct __riscv_ctx_hdr { + __u32 magic; + __u32 size; +}; + +struct __riscv_extra_ext_header { + __u32 __padding[129] __attribute__((aligned(16))); + /* + * Reserved for expansion of sigcontext structure. Currently zeroed + * upon signal, and must be zero upon sigreturn. + */ + __u32 reserved; + struct __riscv_ctx_hdr hdr; +}; + union __riscv_fp_state { struct __riscv_f_ext_state f; struct __riscv_d_ext_state d; struct __riscv_q_ext_state q; }; +struct __riscv_v_ext_state { + unsigned long vstart; + unsigned long vl; + unsigned long vtype; + unsigned long vcsr; + unsigned long vlenb; + void *datap; + /* + * In signal handler, datap will be set a correct user stack offset + * and vector registers will be copied to the address of datap + * pointer. + */ +}; + +struct __riscv_v_regset_state { + unsigned long vstart; + unsigned long vl; + unsigned long vtype; + unsigned long vcsr; + unsigned long vlenb; + char vreg[]; +}; + +/* + * According to spec: The number of bits in a single vector register, + * VLEN >= ELEN, which must be a power of 2, and must be no greater than + * 2^16 = 65536bits = 8192bytes + */ +#define RISCV_MAX_VLENB (8192) + #endif /* __ASSEMBLY__ */ #endif /* _ASM_RISCV_PTRACE_H */ diff --git a/linux-headers/include/asm/setup.h b/linux-headers/include/asm/setup.h index 552df83f1a4..949e29dae22 100644 --- a/linux-headers/include/asm/setup.h +++ b/linux-headers/include/asm/setup.h @@ -1 +1,8 @@ -#include +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ + +#ifndef _ASM_RISCV_SETUP_H +#define _ASM_RISCV_SETUP_H + +#define COMMAND_LINE_SIZE 1024 + +#endif /* _ASM_RISCV_SETUP_H */ diff --git a/linux-headers/include/asm/sigcontext.h b/linux-headers/include/asm/sigcontext.h index 848bbf29e49..fe20aff8ad0 100644 --- a/linux-headers/include/asm/sigcontext.h +++ b/linux-headers/include/asm/sigcontext.h @@ -8,15 +8,33 @@ #include +/* The Magic number for signal context frame header. */ +#define RISCV_V_MAGIC 0x53465457 +#define END_MAGIC 0x0 + +/* The size of END signal context header. */ +#define END_HDR_SIZE 0x0 + +#ifndef __ASSEMBLY__ + +struct __sc_riscv_v_state { + struct __riscv_v_ext_state v_state; +} __attribute__((aligned(16))); + /* * Signal context structure * * This contains the context saved before a signal handler is invoked; - * it is restored by sys_sigreturn / sys_rt_sigreturn. + * it is restored by sys_rt_sigreturn. */ struct sigcontext { struct user_regs_struct sc_regs; - union __riscv_fp_state sc_fpregs; + union { + union __riscv_fp_state sc_fpregs; + struct __riscv_extra_ext_header sc_extdesc; + }; }; +#endif /*!__ASSEMBLY__*/ + #endif /* _ASM_RISCV_SIGCONTEXT_H */ diff --git a/linux-headers/include/asm/ucontext.h b/linux-headers/include/asm/ucontext.h index de19d55e893..0561acdf81f 100644 --- a/linux-headers/include/asm/ucontext.h +++ b/linux-headers/include/asm/ucontext.h @@ -15,19 +15,23 @@ struct ucontext { struct ucontext *uc_link; stack_t uc_stack; sigset_t uc_sigmask; - /* There's some padding here to allow sigset_t to be expanded in the + /* + * There's some padding here to allow sigset_t to be expanded in the * future. Though this is unlikely, other architectures put uc_sigmask * at the end of this structure and explicitly state it can be - * expanded, so we didn't want to box ourselves in here. */ + * expanded, so we didn't want to box ourselves in here. + */ __u8 __unused[1024 / 8 - sizeof(sigset_t)]; - /* We can't put uc_sigmask at the end of this structure because we need + /* + * We can't put uc_sigmask at the end of this structure because we need * to be able to expand sigcontext in the future. For example, the * vector ISA extension will almost certainly add ISA state. We want * to ensure all user-visible ISA state can be saved and restored via a * ucontext, so we're putting this at the end in order to allow for * infinite extensibility. Since we know this will be extended and we * assume sigset_t won't be extended an extreme amount, we're - * prioritizing this. */ + * prioritizing this. + */ struct sigcontext uc_mcontext; }; diff --git a/linux-headers/include/asm/unistd.h b/linux-headers/include/asm/unistd.h index 4b989ae15d5..950ab3fd440 100644 --- a/linux-headers/include/asm/unistd.h +++ b/linux-headers/include/asm/unistd.h @@ -15,12 +15,14 @@ * along with this program. If not, see . */ -#ifdef __LP64__ +#if defined(__LP64__) && !defined(__SYSCALL_COMPAT) #define __ARCH_WANT_NEW_STAT #define __ARCH_WANT_SET_GET_RLIMIT -#define __ARCH_WANT_SYS_CLONE3 #endif /* __LP64__ */ +#define __ARCH_WANT_SYS_CLONE3 +#define __ARCH_WANT_MEMFD_SECRET + #include /* @@ -41,3 +43,12 @@ #define __NR_riscv_flush_icache (__NR_arch_specific_syscall + 15) #endif __SYSCALL(__NR_riscv_flush_icache, sys_riscv_flush_icache) + +/* + * Allows userspace to query the kernel for CPU architecture and + * microarchitecture details across a given set of CPUs. + */ +#ifndef __NR_riscv_hwprobe +#define __NR_riscv_hwprobe (__NR_arch_specific_syscall + 14) +#endif +__SYSCALL(__NR_riscv_hwprobe, sys_riscv_hwprobe) diff --git a/linux-headers/include/drm/amdgpu_drm.h b/linux-headers/include/drm/amdgpu_drm.h index c5ff2b275fc..f477eda6a2b 100644 --- a/linux-headers/include/drm/amdgpu_drm.h +++ b/linux-headers/include/drm/amdgpu_drm.h @@ -80,7 +80,7 @@ extern "C" { * * %AMDGPU_GEM_DOMAIN_GTT GPU accessible system memory, mapped into the * GPU's virtual address space via gart. Gart memory linearizes non-contiguous - * pages of system memory, allows GPU access system memory in a linezrized + * pages of system memory, allows GPU access system memory in a linearized * fashion. * * %AMDGPU_GEM_DOMAIN_VRAM Local video memory. For APUs, it is memory @@ -94,6 +94,9 @@ extern "C" { * * %AMDGPU_GEM_DOMAIN_OA Ordered append, used by 3D or Compute engines * for appending data. + * + * %AMDGPU_GEM_DOMAIN_DOORBELL Doorbell. It is an MMIO region for + * signalling user mode queues. */ #define AMDGPU_GEM_DOMAIN_CPU 0x1 #define AMDGPU_GEM_DOMAIN_GTT 0x2 @@ -101,12 +104,14 @@ extern "C" { #define AMDGPU_GEM_DOMAIN_GDS 0x8 #define AMDGPU_GEM_DOMAIN_GWS 0x10 #define AMDGPU_GEM_DOMAIN_OA 0x20 +#define AMDGPU_GEM_DOMAIN_DOORBELL 0x40 #define AMDGPU_GEM_DOMAIN_MASK (AMDGPU_GEM_DOMAIN_CPU | \ AMDGPU_GEM_DOMAIN_GTT | \ AMDGPU_GEM_DOMAIN_VRAM | \ AMDGPU_GEM_DOMAIN_GDS | \ AMDGPU_GEM_DOMAIN_GWS | \ - AMDGPU_GEM_DOMAIN_OA) + AMDGPU_GEM_DOMAIN_OA | \ + AMDGPU_GEM_DOMAIN_DOORBELL) /* Flag that CPU access will be required for the case of VRAM domain */ #define AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED (1 << 0) @@ -116,8 +121,6 @@ extern "C" { #define AMDGPU_GEM_CREATE_CPU_GTT_USWC (1 << 2) /* Flag that the memory should be in VRAM and cleared */ #define AMDGPU_GEM_CREATE_VRAM_CLEARED (1 << 3) -/* Flag that create shadow bo(GTT) while allocating vram bo */ -#define AMDGPU_GEM_CREATE_SHADOW (1 << 4) /* Flag that allocating the BO should use linear VRAM */ #define AMDGPU_GEM_CREATE_VRAM_CONTIGUOUS (1 << 5) /* Flag that BO is always valid in this VM */ @@ -138,6 +141,28 @@ extern "C" { * accessing it with various hw blocks */ #define AMDGPU_GEM_CREATE_ENCRYPTED (1 << 10) +/* Flag that BO will be used only in preemptible context, which does + * not require GTT memory accounting + */ +#define AMDGPU_GEM_CREATE_PREEMPTIBLE (1 << 11) +/* Flag that BO can be discarded under memory pressure without keeping the + * content. + */ +#define AMDGPU_GEM_CREATE_DISCARDABLE (1 << 12) +/* Flag that BO is shared coherently between multiple devices or CPU threads. + * May depend on GPU instructions to flush caches explicitly + * + * This influences the choice of MTYPE in the PTEs on GFXv9 and later GPUs and + * may override the MTYPE selected in AMDGPU_VA_OP_MAP. + */ +#define AMDGPU_GEM_CREATE_COHERENT (1 << 13) +/* Flag that BO should not be cached by GPU. Coherent without having to flush + * GPU caches explicitly + * + * This influences the choice of MTYPE in the PTEs on GFXv9 and later GPUs and + * may override the MTYPE selected in AMDGPU_VA_OP_MAP. + */ +#define AMDGPU_GEM_CREATE_UNCACHED (1 << 14) struct drm_amdgpu_gem_create_in { /** the requested memory size */ @@ -204,6 +229,8 @@ union drm_amdgpu_bo_list { #define AMDGPU_CTX_OP_FREE_CTX 2 #define AMDGPU_CTX_OP_QUERY_STATE 3 #define AMDGPU_CTX_OP_QUERY_STATE2 4 +#define AMDGPU_CTX_OP_GET_STABLE_PSTATE 5 +#define AMDGPU_CTX_OP_SET_STABLE_PSTATE 6 /* GPU reset status */ #define AMDGPU_CTX_NO_RESET 0 @@ -223,6 +250,8 @@ union drm_amdgpu_bo_list { /* indicate some errors are detected by RAS */ #define AMDGPU_CTX_QUERY2_FLAGS_RAS_CE (1<<3) #define AMDGPU_CTX_QUERY2_FLAGS_RAS_UE (1<<4) +/* indicate that the reset hasn't completed yet */ +#define AMDGPU_CTX_QUERY2_FLAGS_RESET_IN_PROGRESS (1<<5) /* Context priority level */ #define AMDGPU_CTX_PRIORITY_UNSET -2048 @@ -236,10 +265,18 @@ union drm_amdgpu_bo_list { #define AMDGPU_CTX_PRIORITY_HIGH 512 #define AMDGPU_CTX_PRIORITY_VERY_HIGH 1023 +/* select a stable profiling pstate for perfmon tools */ +#define AMDGPU_CTX_STABLE_PSTATE_FLAGS_MASK 0xf +#define AMDGPU_CTX_STABLE_PSTATE_NONE 0 +#define AMDGPU_CTX_STABLE_PSTATE_STANDARD 1 +#define AMDGPU_CTX_STABLE_PSTATE_MIN_SCLK 2 +#define AMDGPU_CTX_STABLE_PSTATE_MIN_MCLK 3 +#define AMDGPU_CTX_STABLE_PSTATE_PEAK 4 + struct drm_amdgpu_ctx_in { /** AMDGPU_CTX_OP_* */ __u32 op; - /** For future use, no flags defined so far */ + /** Flags */ __u32 flags; __u32 ctx_id; /** AMDGPU_CTX_PRIORITY_* */ @@ -260,6 +297,11 @@ union drm_amdgpu_ctx_out { /** Reset status since the last call of the ioctl. */ __u32 reset_status; } state; + + struct { + __u32 flags; + __u32 _pad; + } pstate; }; union drm_amdgpu_ctx { @@ -512,6 +554,8 @@ struct drm_amdgpu_gem_op { #define AMDGPU_VM_MTYPE_UC (4 << 5) /* Use Read Write MTYPE instead of default MTYPE */ #define AMDGPU_VM_MTYPE_RW (5 << 5) +/* don't allocate MALL */ +#define AMDGPU_VM_PAGE_NOALLOC (1 << 9) struct drm_amdgpu_gem_va { /** GEM object handle */ @@ -536,6 +580,10 @@ struct drm_amdgpu_gem_va { #define AMDGPU_HW_IP_VCE 4 #define AMDGPU_HW_IP_UVD_ENC 5 #define AMDGPU_HW_IP_VCN_DEC 6 +/* + * From VCN4, AMDGPU_HW_IP_VCN_ENC is re-used to support + * both encoding and decoding jobs. + */ #define AMDGPU_HW_IP_VCN_ENC 7 #define AMDGPU_HW_IP_VCN_JPEG 8 #define AMDGPU_HW_IP_NUM 9 @@ -551,6 +599,7 @@ struct drm_amdgpu_gem_va { #define AMDGPU_CHUNK_ID_SCHEDULED_DEPENDENCIES 0x07 #define AMDGPU_CHUNK_ID_SYNCOBJ_TIMELINE_WAIT 0x08 #define AMDGPU_CHUNK_ID_SYNCOBJ_TIMELINE_SIGNAL 0x09 +#define AMDGPU_CHUNK_ID_CP_GFX_SHADOW 0x0a struct drm_amdgpu_cs_chunk { __u32 chunk_id; @@ -667,13 +716,23 @@ struct drm_amdgpu_cs_chunk_data { }; }; -/** +#define AMDGPU_CS_CHUNK_CP_GFX_SHADOW_FLAGS_INIT_SHADOW 0x1 + +struct drm_amdgpu_cs_chunk_cp_gfx_shadow { + __u64 shadow_va; + __u64 csa_va; + __u64 gds_va; + __u64 flags; +}; + +/* * Query h/w info: Flag that this is integrated (a.h.a. fusion) GPU * */ #define AMDGPU_IDS_FLAGS_FUSION 0x1 #define AMDGPU_IDS_FLAGS_PREEMPTION 0x2 #define AMDGPU_IDS_FLAGS_TMZ 0x4 +#define AMDGPU_IDS_FLAGS_CONFORMANT_TRUNC_COORD 0x8 /* indicate if acceleration can be working */ #define AMDGPU_INFO_ACCEL_WORKING 0x00 @@ -724,6 +783,20 @@ struct drm_amdgpu_cs_chunk_data { #define AMDGPU_INFO_FW_TA 0x13 /* Subquery id: Query DMCUB firmware version */ #define AMDGPU_INFO_FW_DMCUB 0x14 + /* Subquery id: Query TOC firmware version */ + #define AMDGPU_INFO_FW_TOC 0x15 + /* Subquery id: Query CAP firmware version */ + #define AMDGPU_INFO_FW_CAP 0x16 + /* Subquery id: Query GFX RLCP firmware version */ + #define AMDGPU_INFO_FW_GFX_RLCP 0x17 + /* Subquery id: Query GFX RLCV firmware version */ + #define AMDGPU_INFO_FW_GFX_RLCV 0x18 + /* Subquery id: Query MES_KIQ firmware version */ + #define AMDGPU_INFO_FW_MES_KIQ 0x19 + /* Subquery id: Query MES firmware version */ + #define AMDGPU_INFO_FW_MES 0x1a + /* Subquery id: Query IMU firmware version */ + #define AMDGPU_INFO_FW_IMU 0x1b /* number of bytes moved for TTM migration */ #define AMDGPU_INFO_NUM_BYTES_MOVED 0x0f @@ -753,6 +826,8 @@ struct drm_amdgpu_cs_chunk_data { #define AMDGPU_INFO_VBIOS_SIZE 0x1 /* Subquery id: Query vbios image */ #define AMDGPU_INFO_VBIOS_IMAGE 0x2 + /* Subquery id: Query vbios info */ + #define AMDGPU_INFO_VBIOS_INFO 0x3 /* Query UVD handles */ #define AMDGPU_INFO_NUM_HANDLES 0x1C /* Query sensor related information */ @@ -775,12 +850,15 @@ struct drm_amdgpu_cs_chunk_data { #define AMDGPU_INFO_SENSOR_STABLE_PSTATE_GFX_SCLK 0x8 /* Subquery id: Query GPU stable pstate memory clock */ #define AMDGPU_INFO_SENSOR_STABLE_PSTATE_GFX_MCLK 0x9 + /* Subquery id: Query GPU peak pstate shader clock */ + #define AMDGPU_INFO_SENSOR_PEAK_PSTATE_GFX_SCLK 0xa + /* Subquery id: Query GPU peak pstate memory clock */ + #define AMDGPU_INFO_SENSOR_PEAK_PSTATE_GFX_MCLK 0xb /* Number of VRAM page faults on CPU access. */ #define AMDGPU_INFO_NUM_VRAM_CPU_PAGE_FAULTS 0x1E #define AMDGPU_INFO_VRAM_LOST_COUNTER 0x1F /* query ras mask of enabled features*/ #define AMDGPU_INFO_RAS_ENABLED_FEATURES 0x20 - /* RAS MASK: UMC (VRAM) */ #define AMDGPU_INFO_RAS_ENABLED_UMC (1 << 0) /* RAS MASK: SDMA */ @@ -809,6 +887,14 @@ struct drm_amdgpu_cs_chunk_data { #define AMDGPU_INFO_RAS_ENABLED_MP1 (1 << 12) /* RAS MASK: FUSE */ #define AMDGPU_INFO_RAS_ENABLED_FUSE (1 << 13) +/* query video encode/decode caps */ +#define AMDGPU_INFO_VIDEO_CAPS 0x21 + /* Subquery id: Decode */ + #define AMDGPU_INFO_VIDEO_CAPS_DECODE 0 + /* Subquery id: Encode */ + #define AMDGPU_INFO_VIDEO_CAPS_ENCODE 1 +/* Query the max number of IBs per gang per submission */ +#define AMDGPU_INFO_MAX_IBS 0x22 #define AMDGPU_INFO_MMR_SE_INDEX_SHIFT 0 #define AMDGPU_INFO_MMR_SE_INDEX_MASK 0xff @@ -876,6 +962,10 @@ struct drm_amdgpu_info { struct { __u32 type; } sensor_info; + + struct { + __u32 type; + } video_cap; }; }; @@ -936,6 +1026,15 @@ struct drm_amdgpu_info_firmware { __u32 feature; }; +struct drm_amdgpu_info_vbios { + __u8 name[64]; + __u8 vbios_pn[64]; + __u32 version; + __u32 pad; + __u8 vbios_ver_str[32]; + __u8 date[32]; +}; + #define AMDGPU_VRAM_TYPE_UNKNOWN 0 #define AMDGPU_VRAM_TYPE_GDDR1 1 #define AMDGPU_VRAM_TYPE_DDR2 2 @@ -946,6 +1045,9 @@ struct drm_amdgpu_info_firmware { #define AMDGPU_VRAM_TYPE_DDR3 7 #define AMDGPU_VRAM_TYPE_DDR4 8 #define AMDGPU_VRAM_TYPE_GDDR6 9 +#define AMDGPU_VRAM_TYPE_DDR5 10 +#define AMDGPU_VRAM_TYPE_LPDDR4 11 +#define AMDGPU_VRAM_TYPE_LPDDR5 12 struct drm_amdgpu_info_device { /** PCI Device ID */ @@ -971,7 +1073,8 @@ struct drm_amdgpu_info_device { __u32 enabled_rb_pipes_mask; __u32 num_rb_pipes; __u32 num_hw_gfx_contexts; - __u32 _pad; + /* PCIe version (the smaller of the GPU and the CPU/motherboard) */ + __u32 pcie_gen; __u64 ids_flags; /** Starting virtual address for UMDs. */ __u64 virtual_address_offset; @@ -1018,7 +1121,8 @@ struct drm_amdgpu_info_device { __u32 gs_prim_buffer_depth; /* max gs wavefront per vgt*/ __u32 max_gs_waves_per_vgt; - __u32 _pad1; + /* PCIe number of lanes (the smaller of the GPU and the CPU/motherboard) */ + __u32 pcie_num_lanes; /* always on cu bitmap */ __u32 cu_ao_bitmap[4][4]; /** Starting high virtual address for UMDs. */ @@ -1029,6 +1133,26 @@ struct drm_amdgpu_info_device { __u32 pa_sc_tile_steering_override; /* disabled TCCs */ __u64 tcc_disabled_mask; + __u64 min_engine_clock; + __u64 min_memory_clock; + /* The following fields are only set on gfx11+, older chips set 0. */ + __u32 tcp_cache_size; /* AKA GL0, VMEM cache */ + __u32 num_sqc_per_wgp; + __u32 sqc_data_cache_size; /* AKA SMEM cache */ + __u32 sqc_inst_cache_size; + __u32 gl1c_cache_size; + __u32 gl2c_cache_size; + __u64 mall_size; /* AKA infinity cache */ + /* high 32 bits of the rb pipes mask */ + __u32 enabled_rb_pipes_mask_hi; + /* shadow area size for gfx11 */ + __u32 shadow_size; + /* shadow area base virtual alignment for gfx11 */ + __u32 shadow_alignment; + /* context save area size for gfx11 */ + __u32 csa_size; + /* context save area base virtual alignment for gfx11 */ + __u32 csa_alignment; }; struct drm_amdgpu_info_hw_ip { @@ -1043,7 +1167,8 @@ struct drm_amdgpu_info_hw_ip { __u32 ib_size_alignment; /** Bitmask of available rings. Bit 0 means ring 0, etc. */ __u32 available_rings; - __u32 _pad; + /** version info: bits 23:16 major, 15:8 minor, 7:0 revision */ + __u32 ip_discovery_version; }; struct drm_amdgpu_info_num_handles { @@ -1071,6 +1196,30 @@ struct drm_amdgpu_info_vce_clock_table { __u32 pad; }; +/* query video encode/decode caps */ +#define AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG2 0 +#define AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4 1 +#define AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VC1 2 +#define AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4_AVC 3 +#define AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_HEVC 4 +#define AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_JPEG 5 +#define AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VP9 6 +#define AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_AV1 7 +#define AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_COUNT 8 + +struct drm_amdgpu_info_video_codec_info { + __u32 valid; + __u32 max_width; + __u32 max_height; + __u32 max_pixels_per_frame; + __u32 max_level; + __u32 pad; +}; + +struct drm_amdgpu_info_video_caps { + struct drm_amdgpu_info_video_codec_info codec_info[AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_COUNT]; +}; + /* * Supported GPU families */ @@ -1083,6 +1232,12 @@ struct drm_amdgpu_info_vce_clock_table { #define AMDGPU_FAMILY_AI 141 /* Vega10 */ #define AMDGPU_FAMILY_RV 142 /* Raven */ #define AMDGPU_FAMILY_NV 143 /* Navi10 */ +#define AMDGPU_FAMILY_VGH 144 /* Van Gogh */ +#define AMDGPU_FAMILY_GC_11_0_0 145 /* GC 11.0.0 */ +#define AMDGPU_FAMILY_YC 146 /* Yellow Carp */ +#define AMDGPU_FAMILY_GC_11_0_1 148 /* GC 11.0.1 */ +#define AMDGPU_FAMILY_GC_10_3_6 149 /* GC 10.3.6 */ +#define AMDGPU_FAMILY_GC_10_3_7 151 /* GC 10.3.7 */ #if defined(__cplusplus) } diff --git a/linux-headers/include/drm/drm.h b/linux-headers/include/drm/drm.h index c7fd2a35fd7..02540248deb 100644 --- a/linux-headers/include/drm/drm.h +++ b/linux-headers/include/drm/drm.h @@ -1,11 +1,10 @@ -/** - * \file drm.h +/* * Header for the Direct Rendering Manager * - * \author Rickard E. (Rik) Faith + * Author: Rickard E. (Rik) Faith * - * \par Acknowledgments: - * Dec 1999, Richard Henderson , move to generic \c cmpxchg. + * Acknowledgments: + * Dec 1999, Richard Henderson , move to generic cmpxchg. */ /* @@ -79,7 +78,7 @@ typedef unsigned int drm_context_t; typedef unsigned int drm_drawable_t; typedef unsigned int drm_magic_t; -/** +/* * Cliprect. * * \warning: If you change this structure, make sure you change @@ -95,7 +94,7 @@ struct drm_clip_rect { unsigned short y2; }; -/** +/* * Drawable information. */ struct drm_drawable_info { @@ -103,7 +102,7 @@ struct drm_drawable_info { struct drm_clip_rect *rects; }; -/** +/* * Texture region, */ struct drm_tex_region { @@ -114,7 +113,7 @@ struct drm_tex_region { unsigned int age; }; -/** +/* * Hardware lock. * * The lock structure is a simple cache-line aligned integer. To avoid @@ -126,7 +125,7 @@ struct drm_hw_lock { char padding[60]; /**< Pad to cache line */ }; -/** +/* * DRM_IOCTL_VERSION ioctl argument type. * * \sa drmGetVersion(). @@ -143,7 +142,7 @@ struct drm_version { char *desc; /**< User-space buffer to hold desc */ }; -/** +/* * DRM_IOCTL_GET_UNIQUE ioctl argument type. * * \sa drmGetBusid() and drmSetBusId(). @@ -162,7 +161,7 @@ struct drm_block { int unused; }; -/** +/* * DRM_IOCTL_CONTROL ioctl argument type. * * \sa drmCtlInstHandler() and drmCtlUninstHandler(). @@ -177,7 +176,7 @@ struct drm_control { int irq; }; -/** +/* * Type of memory to map. */ enum drm_map_type { @@ -189,7 +188,7 @@ enum drm_map_type { _DRM_CONSISTENT = 5 /**< Consistent memory for PCI DMA */ }; -/** +/* * Memory mapping flags. */ enum drm_map_flags { @@ -208,7 +207,7 @@ struct drm_ctx_priv_map { void *handle; /**< Handle of map */ }; -/** +/* * DRM_IOCTL_GET_MAP, DRM_IOCTL_ADD_MAP and DRM_IOCTL_RM_MAP ioctls * argument type. * @@ -225,7 +224,7 @@ struct drm_map { /* Private data */ }; -/** +/* * DRM_IOCTL_GET_CLIENT ioctl argument type. */ struct drm_client { @@ -257,7 +256,7 @@ enum drm_stat_type { /* Add to the *END* of the list */ }; -/** +/* * DRM_IOCTL_GET_STATS ioctl argument type. */ struct drm_stats { @@ -268,7 +267,7 @@ struct drm_stats { } data[15]; }; -/** +/* * Hardware locking flags. */ enum drm_lock_flags { @@ -283,7 +282,7 @@ enum drm_lock_flags { _DRM_HALT_CUR_QUEUES = 0x20 /**< Halt all current queues */ }; -/** +/* * DRM_IOCTL_LOCK, DRM_IOCTL_UNLOCK and DRM_IOCTL_FINISH ioctl argument type. * * \sa drmGetLock() and drmUnlock(). @@ -293,7 +292,7 @@ struct drm_lock { enum drm_lock_flags flags; }; -/** +/* * DMA flags * * \warning @@ -322,7 +321,7 @@ enum drm_dma_flags { _DRM_DMA_LARGER_OK = 0x40 /**< Larger-than-requested buffers OK */ }; -/** +/* * DRM_IOCTL_ADD_BUFS and DRM_IOCTL_MARK_BUFS ioctl argument type. * * \sa drmAddBufs(). @@ -345,7 +344,7 @@ struct drm_buf_desc { */ }; -/** +/* * DRM_IOCTL_INFO_BUFS ioctl argument type. */ struct drm_buf_info { @@ -353,7 +352,7 @@ struct drm_buf_info { struct drm_buf_desc *list; }; -/** +/* * DRM_IOCTL_FREE_BUFS ioctl argument type. */ struct drm_buf_free { @@ -361,7 +360,7 @@ struct drm_buf_free { int *list; }; -/** +/* * Buffer information * * \sa drm_buf_map. @@ -373,7 +372,7 @@ struct drm_buf_pub { void *address; /**< Address of buffer */ }; -/** +/* * DRM_IOCTL_MAP_BUFS ioctl argument type. */ struct drm_buf_map { @@ -386,7 +385,7 @@ struct drm_buf_map { struct drm_buf_pub *list; /**< Buffer information */ }; -/** +/* * DRM_IOCTL_DMA ioctl argument type. * * Indices here refer to the offset into the buffer list in drm_buf_get. @@ -411,7 +410,7 @@ enum drm_ctx_flags { _DRM_CONTEXT_2DONLY = 0x02 }; -/** +/* * DRM_IOCTL_ADD_CTX ioctl argument type. * * \sa drmCreateContext() and drmDestroyContext(). @@ -421,7 +420,7 @@ struct drm_ctx { enum drm_ctx_flags flags; }; -/** +/* * DRM_IOCTL_RES_CTX ioctl argument type. */ struct drm_ctx_res { @@ -429,14 +428,14 @@ struct drm_ctx_res { struct drm_ctx *contexts; }; -/** +/* * DRM_IOCTL_ADD_DRAW and DRM_IOCTL_RM_DRAW ioctl argument type. */ struct drm_draw { drm_drawable_t handle; }; -/** +/* * DRM_IOCTL_UPDATE_DRAW ioctl argument type. */ typedef enum { @@ -450,14 +449,14 @@ struct drm_update_draw { unsigned long long data; }; -/** +/* * DRM_IOCTL_GET_MAGIC and DRM_IOCTL_AUTH_MAGIC ioctl argument type. */ struct drm_auth { drm_magic_t magic; }; -/** +/* * DRM_IOCTL_IRQ_BUSID ioctl argument type. * * \sa drmGetInterruptFromBusID(). @@ -499,7 +498,7 @@ struct drm_wait_vblank_reply { long tval_usec; }; -/** +/* * DRM_IOCTL_WAIT_VBLANK ioctl argument type. * * \sa drmWaitVBlank(). @@ -512,7 +511,7 @@ union drm_wait_vblank { #define _DRM_PRE_MODESET 1 #define _DRM_POST_MODESET 2 -/** +/* * DRM_IOCTL_MODESET_CTL ioctl argument type * * \sa drmModesetCtl(). @@ -522,7 +521,7 @@ struct drm_modeset_ctl { __u32 cmd; }; -/** +/* * DRM_IOCTL_AGP_ENABLE ioctl argument type. * * \sa drmAgpEnable(). @@ -531,7 +530,7 @@ struct drm_agp_mode { unsigned long mode; /**< AGP mode */ }; -/** +/* * DRM_IOCTL_AGP_ALLOC and DRM_IOCTL_AGP_FREE ioctls argument type. * * \sa drmAgpAlloc() and drmAgpFree(). @@ -543,7 +542,7 @@ struct drm_agp_buffer { unsigned long physical; /**< Physical used by i810 */ }; -/** +/* * DRM_IOCTL_AGP_BIND and DRM_IOCTL_AGP_UNBIND ioctls argument type. * * \sa drmAgpBind() and drmAgpUnbind(). @@ -553,7 +552,7 @@ struct drm_agp_binding { unsigned long offset; /**< In bytes -- will round to page boundary */ }; -/** +/* * DRM_IOCTL_AGP_INFO ioctl argument type. * * \sa drmAgpVersionMajor(), drmAgpVersionMinor(), drmAgpGetMode(), @@ -574,7 +573,7 @@ struct drm_agp_info { unsigned short id_device; }; -/** +/* * DRM_IOCTL_SG_ALLOC ioctl argument type. */ struct drm_scatter_gather { @@ -582,7 +581,7 @@ struct drm_scatter_gather { unsigned long handle; /**< Used for mapping / unmapping */ }; -/** +/* * DRM_IOCTL_SET_VERSION ioctl argument type. */ struct drm_set_version { @@ -592,14 +591,14 @@ struct drm_set_version { int drm_dd_minor; }; -/** DRM_IOCTL_GEM_CLOSE ioctl argument type */ +/* DRM_IOCTL_GEM_CLOSE ioctl argument type */ struct drm_gem_close { /** Handle of the object to be closed. */ __u32 handle; __u32 pad; }; -/** DRM_IOCTL_GEM_FLINK ioctl argument type */ +/* DRM_IOCTL_GEM_FLINK ioctl argument type */ struct drm_gem_flink { /** Handle for the object being named */ __u32 handle; @@ -608,7 +607,7 @@ struct drm_gem_flink { __u32 name; }; -/** DRM_IOCTL_GEM_OPEN ioctl argument type */ +/* DRM_IOCTL_GEM_OPEN ioctl argument type */ struct drm_gem_open { /** Name of object being opened */ __u32 name; @@ -620,33 +619,156 @@ struct drm_gem_open { __u64 size; }; +/** + * DRM_CAP_DUMB_BUFFER + * + * If set to 1, the driver supports creating dumb buffers via the + * &DRM_IOCTL_MODE_CREATE_DUMB ioctl. + */ #define DRM_CAP_DUMB_BUFFER 0x1 +/** + * DRM_CAP_VBLANK_HIGH_CRTC + * + * If set to 1, the kernel supports specifying a :ref:`CRTC index` + * in the high bits of &drm_wait_vblank_request.type. + * + * Starting kernel version 2.6.39, this capability is always set to 1. + */ #define DRM_CAP_VBLANK_HIGH_CRTC 0x2 +/** + * DRM_CAP_DUMB_PREFERRED_DEPTH + * + * The preferred bit depth for dumb buffers. + * + * The bit depth is the number of bits used to indicate the color of a single + * pixel excluding any padding. This is different from the number of bits per + * pixel. For instance, XRGB8888 has a bit depth of 24 but has 32 bits per + * pixel. + * + * Note that this preference only applies to dumb buffers, it's irrelevant for + * other types of buffers. + */ #define DRM_CAP_DUMB_PREFERRED_DEPTH 0x3 +/** + * DRM_CAP_DUMB_PREFER_SHADOW + * + * If set to 1, the driver prefers userspace to render to a shadow buffer + * instead of directly rendering to a dumb buffer. For best speed, userspace + * should do streaming ordered memory copies into the dumb buffer and never + * read from it. + * + * Note that this preference only applies to dumb buffers, it's irrelevant for + * other types of buffers. + */ #define DRM_CAP_DUMB_PREFER_SHADOW 0x4 +/** + * DRM_CAP_PRIME + * + * Bitfield of supported PRIME sharing capabilities. See &DRM_PRIME_CAP_IMPORT + * and &DRM_PRIME_CAP_EXPORT. + * + * Starting from kernel version 6.6, both &DRM_PRIME_CAP_IMPORT and + * &DRM_PRIME_CAP_EXPORT are always advertised. + * + * PRIME buffers are exposed as dma-buf file descriptors. + * See :ref:`prime_buffer_sharing`. + */ #define DRM_CAP_PRIME 0x5 +/** + * DRM_PRIME_CAP_IMPORT + * + * If this bit is set in &DRM_CAP_PRIME, the driver supports importing PRIME + * buffers via the &DRM_IOCTL_PRIME_FD_TO_HANDLE ioctl. + * + * Starting from kernel version 6.6, this bit is always set in &DRM_CAP_PRIME. + */ #define DRM_PRIME_CAP_IMPORT 0x1 +/** + * DRM_PRIME_CAP_EXPORT + * + * If this bit is set in &DRM_CAP_PRIME, the driver supports exporting PRIME + * buffers via the &DRM_IOCTL_PRIME_HANDLE_TO_FD ioctl. + * + * Starting from kernel version 6.6, this bit is always set in &DRM_CAP_PRIME. + */ #define DRM_PRIME_CAP_EXPORT 0x2 +/** + * DRM_CAP_TIMESTAMP_MONOTONIC + * + * If set to 0, the kernel will report timestamps with ``CLOCK_REALTIME`` in + * struct drm_event_vblank. If set to 1, the kernel will report timestamps with + * ``CLOCK_MONOTONIC``. See ``clock_gettime(2)`` for the definition of these + * clocks. + * + * Starting from kernel version 2.6.39, the default value for this capability + * is 1. Starting kernel version 4.15, this capability is always set to 1. + */ #define DRM_CAP_TIMESTAMP_MONOTONIC 0x6 +/** + * DRM_CAP_ASYNC_PAGE_FLIP + * + * If set to 1, the driver supports &DRM_MODE_PAGE_FLIP_ASYNC. + */ #define DRM_CAP_ASYNC_PAGE_FLIP 0x7 -/* - * The CURSOR_WIDTH and CURSOR_HEIGHT capabilities return a valid widthxheight - * combination for the hardware cursor. The intention is that a hardware - * agnostic userspace can query a cursor plane size to use. +/** + * DRM_CAP_CURSOR_WIDTH + * + * The ``CURSOR_WIDTH`` and ``CURSOR_HEIGHT`` capabilities return a valid + * width x height combination for the hardware cursor. The intention is that a + * hardware agnostic userspace can query a cursor plane size to use. * * Note that the cross-driver contract is to merely return a valid size; * drivers are free to attach another meaning on top, eg. i915 returns the * maximum plane size. */ #define DRM_CAP_CURSOR_WIDTH 0x8 +/** + * DRM_CAP_CURSOR_HEIGHT + * + * See &DRM_CAP_CURSOR_WIDTH. + */ #define DRM_CAP_CURSOR_HEIGHT 0x9 +/** + * DRM_CAP_ADDFB2_MODIFIERS + * + * If set to 1, the driver supports supplying modifiers in the + * &DRM_IOCTL_MODE_ADDFB2 ioctl. + */ #define DRM_CAP_ADDFB2_MODIFIERS 0x10 +/** + * DRM_CAP_PAGE_FLIP_TARGET + * + * If set to 1, the driver supports the &DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE and + * &DRM_MODE_PAGE_FLIP_TARGET_RELATIVE flags in + * &drm_mode_crtc_page_flip_target.flags for the &DRM_IOCTL_MODE_PAGE_FLIP + * ioctl. + */ #define DRM_CAP_PAGE_FLIP_TARGET 0x11 +/** + * DRM_CAP_CRTC_IN_VBLANK_EVENT + * + * If set to 1, the kernel supports reporting the CRTC ID in + * &drm_event_vblank.crtc_id for the &DRM_EVENT_VBLANK and + * &DRM_EVENT_FLIP_COMPLETE events. + * + * Starting kernel version 4.12, this capability is always set to 1. + */ #define DRM_CAP_CRTC_IN_VBLANK_EVENT 0x12 +/** + * DRM_CAP_SYNCOBJ + * + * If set to 1, the driver supports sync objects. See :ref:`drm_sync_objects`. + */ #define DRM_CAP_SYNCOBJ 0x13 +/** + * DRM_CAP_SYNCOBJ_TIMELINE + * + * If set to 1, the driver supports timeline operations on sync objects. See + * :ref:`drm_sync_objects`. + */ #define DRM_CAP_SYNCOBJ_TIMELINE 0x14 -/** DRM_IOCTL_GET_CAP ioctl argument type */ +/* DRM_IOCTL_GET_CAP ioctl argument type */ struct drm_get_cap { __u64 capability; __u64 value; @@ -655,9 +777,12 @@ struct drm_get_cap { /** * DRM_CLIENT_CAP_STEREO_3D * - * if set to 1, the DRM core will expose the stereo 3D capabilities of the + * If set to 1, the DRM core will expose the stereo 3D capabilities of the * monitor by advertising the supported 3D layouts in the flags of struct - * drm_mode_modeinfo. + * drm_mode_modeinfo. See ``DRM_MODE_FLAG_3D_*``. + * + * This capability is always supported for all drivers starting from kernel + * version 3.13. */ #define DRM_CLIENT_CAP_STEREO_3D 1 @@ -666,13 +791,25 @@ struct drm_get_cap { * * If set to 1, the DRM core will expose all planes (overlay, primary, and * cursor) to userspace. + * + * This capability has been introduced in kernel version 3.15. Starting from + * kernel version 3.17, this capability is always supported for all drivers. */ #define DRM_CLIENT_CAP_UNIVERSAL_PLANES 2 /** * DRM_CLIENT_CAP_ATOMIC * - * If set to 1, the DRM core will expose atomic properties to userspace + * If set to 1, the DRM core will expose atomic properties to userspace. This + * implicitly enables &DRM_CLIENT_CAP_UNIVERSAL_PLANES and + * &DRM_CLIENT_CAP_ASPECT_RATIO. + * + * If the driver doesn't support atomic mode-setting, enabling this capability + * will fail with -EOPNOTSUPP. + * + * This capability has been introduced in kernel version 4.0. Starting from + * kernel version 4.2, this capability is always supported for atomic-capable + * drivers. */ #define DRM_CLIENT_CAP_ATOMIC 3 @@ -680,6 +817,10 @@ struct drm_get_cap { * DRM_CLIENT_CAP_ASPECT_RATIO * * If set to 1, the DRM core will provide aspect ratio information in modes. + * See ``DRM_MODE_FLAG_PIC_AR_*``. + * + * This capability is always supported for all drivers starting from kernel + * version 4.18. */ #define DRM_CLIENT_CAP_ASPECT_RATIO 4 @@ -687,12 +828,15 @@ struct drm_get_cap { * DRM_CLIENT_CAP_WRITEBACK_CONNECTORS * * If set to 1, the DRM core will expose special connectors to be used for - * writing back to memory the scene setup in the commit. Depends on client - * also supporting DRM_CLIENT_CAP_ATOMIC + * writing back to memory the scene setup in the commit. The client must enable + * &DRM_CLIENT_CAP_ATOMIC first. + * + * This capability is always supported for atomic-capable drivers starting from + * kernel version 4.19. */ #define DRM_CLIENT_CAP_WRITEBACK_CONNECTORS 5 -/** DRM_IOCTL_SET_CLIENT_CAP ioctl argument type */ +/* DRM_IOCTL_SET_CLIENT_CAP ioctl argument type */ struct drm_set_client_cap { __u64 capability; __u64 value; @@ -765,6 +909,27 @@ struct drm_syncobj_timeline_wait { __u32 pad; }; +/** + * struct drm_syncobj_eventfd + * @handle: syncobj handle. + * @flags: Zero to wait for the point to be signalled, or + * &DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE to wait for a fence to be + * available for the point. + * @point: syncobj timeline point (set to zero for binary syncobjs). + * @fd: Existing eventfd to sent events to. + * @pad: Must be zero. + * + * Register an eventfd to be signalled by a syncobj. The eventfd counter will + * be incremented by one. + */ +struct drm_syncobj_eventfd { + __u32 handle; + __u32 flags; + __u64 point; + __s32 fd; + __u32 pad; +}; + struct drm_syncobj_array { __u64 handles; @@ -828,6 +993,19 @@ extern "C" { #define DRM_IOCTL_GET_STATS DRM_IOR( 0x06, struct drm_stats) #define DRM_IOCTL_SET_VERSION DRM_IOWR(0x07, struct drm_set_version) #define DRM_IOCTL_MODESET_CTL DRM_IOW(0x08, struct drm_modeset_ctl) +/** + * DRM_IOCTL_GEM_CLOSE - Close a GEM handle. + * + * GEM handles are not reference-counted by the kernel. User-space is + * responsible for managing their lifetime. For example, if user-space imports + * the same memory object twice on the same DRM file description, the same GEM + * handle is returned by both imports, and user-space needs to ensure + * &DRM_IOCTL_GEM_CLOSE is performed once only. The same situation can happen + * when a memory object is allocated, then exported and imported again on the + * same DRM file description. The &DRM_IOCTL_MODE_GETFB2 IOCTL is an exception + * and always returns fresh new GEM handles even if an existing GEM handle + * already refers to the same memory object before the IOCTL is performed. + */ #define DRM_IOCTL_GEM_CLOSE DRM_IOW (0x09, struct drm_gem_close) #define DRM_IOCTL_GEM_FLINK DRM_IOWR(0x0a, struct drm_gem_flink) #define DRM_IOCTL_GEM_OPEN DRM_IOWR(0x0b, struct drm_gem_open) @@ -868,7 +1046,37 @@ extern "C" { #define DRM_IOCTL_UNLOCK DRM_IOW( 0x2b, struct drm_lock) #define DRM_IOCTL_FINISH DRM_IOW( 0x2c, struct drm_lock) +/** + * DRM_IOCTL_PRIME_HANDLE_TO_FD - Convert a GEM handle to a DMA-BUF FD. + * + * User-space sets &drm_prime_handle.handle with the GEM handle to export and + * &drm_prime_handle.flags, and gets back a DMA-BUF file descriptor in + * &drm_prime_handle.fd. + * + * The export can fail for any driver-specific reason, e.g. because export is + * not supported for this specific GEM handle (but might be for others). + * + * Support for exporting DMA-BUFs is advertised via &DRM_PRIME_CAP_EXPORT. + */ #define DRM_IOCTL_PRIME_HANDLE_TO_FD DRM_IOWR(0x2d, struct drm_prime_handle) +/** + * DRM_IOCTL_PRIME_FD_TO_HANDLE - Convert a DMA-BUF FD to a GEM handle. + * + * User-space sets &drm_prime_handle.fd with a DMA-BUF file descriptor to + * import, and gets back a GEM handle in &drm_prime_handle.handle. + * &drm_prime_handle.flags is unused. + * + * If an existing GEM handle refers to the memory object backing the DMA-BUF, + * that GEM handle is returned. Therefore user-space which needs to handle + * arbitrary DMA-BUFs must have a user-space lookup data structure to manually + * reference-count duplicated GEM handles. For more information see + * &DRM_IOCTL_GEM_CLOSE. + * + * The import can fail for any driver-specific reason, e.g. because import is + * only supported for DMA-BUFs allocated on this DRM device. + * + * Support for importing DMA-BUFs is advertised via &DRM_PRIME_CAP_IMPORT. + */ #define DRM_IOCTL_PRIME_FD_TO_HANDLE DRM_IOWR(0x2e, struct drm_prime_handle) #define DRM_IOCTL_AGP_ACQUIRE DRM_IO( 0x30) @@ -906,6 +1114,16 @@ extern "C" { #define DRM_IOCTL_MODE_GETPROPBLOB DRM_IOWR(0xAC, struct drm_mode_get_blob) #define DRM_IOCTL_MODE_GETFB DRM_IOWR(0xAD, struct drm_mode_fb_cmd) #define DRM_IOCTL_MODE_ADDFB DRM_IOWR(0xAE, struct drm_mode_fb_cmd) +/** + * DRM_IOCTL_MODE_RMFB - Remove a framebuffer. + * + * This removes a framebuffer previously added via ADDFB/ADDFB2. The IOCTL + * argument is a framebuffer object ID. + * + * Warning: removing a framebuffer currently in-use on an enabled plane will + * disable that plane. The CRTC the plane is linked to may also be disabled + * (depending on driver capabilities). + */ #define DRM_IOCTL_MODE_RMFB DRM_IOWR(0xAF, unsigned int) #define DRM_IOCTL_MODE_PAGE_FLIP DRM_IOWR(0xB0, struct drm_mode_crtc_page_flip) #define DRM_IOCTL_MODE_DIRTYFB DRM_IOWR(0xB1, struct drm_mode_fb_dirty_cmd) @@ -942,9 +1160,39 @@ extern "C" { #define DRM_IOCTL_SYNCOBJ_TRANSFER DRM_IOWR(0xCC, struct drm_syncobj_transfer) #define DRM_IOCTL_SYNCOBJ_TIMELINE_SIGNAL DRM_IOWR(0xCD, struct drm_syncobj_timeline_array) +/** + * DRM_IOCTL_MODE_GETFB2 - Get framebuffer metadata. + * + * This queries metadata about a framebuffer. User-space fills + * &drm_mode_fb_cmd2.fb_id as the input, and the kernels fills the rest of the + * struct as the output. + * + * If the client is DRM master or has &CAP_SYS_ADMIN, &drm_mode_fb_cmd2.handles + * will be filled with GEM buffer handles. Fresh new GEM handles are always + * returned, even if another GEM handle referring to the same memory object + * already exists on the DRM file description. The caller is responsible for + * removing the new handles, e.g. via the &DRM_IOCTL_GEM_CLOSE IOCTL. The same + * new handle will be returned for multiple planes in case they use the same + * memory object. Planes are valid until one has a zero handle -- this can be + * used to compute the number of planes. + * + * Otherwise, &drm_mode_fb_cmd2.handles will be zeroed and planes are valid + * until one has a zero &drm_mode_fb_cmd2.pitches. + * + * If the framebuffer has a format modifier, &DRM_MODE_FB_MODIFIERS will be set + * in &drm_mode_fb_cmd2.flags and &drm_mode_fb_cmd2.modifier will contain the + * modifier. Otherwise, user-space must ignore &drm_mode_fb_cmd2.modifier. + * + * To obtain DMA-BUF FDs for each plane without leaking GEM handles, user-space + * can export each handle via &DRM_IOCTL_PRIME_HANDLE_TO_FD, then immediately + * close each unique handle via &DRM_IOCTL_GEM_CLOSE, making sure to not + * double-close handles which are specified multiple times in the array. + */ #define DRM_IOCTL_MODE_GETFB2 DRM_IOWR(0xCE, struct drm_mode_fb_cmd2) -/** +#define DRM_IOCTL_SYNCOBJ_EVENTFD DRM_IOWR(0xCF, struct drm_syncobj_eventfd) + +/* * Device specific ioctls should only be in their respective headers * The device specific ioctl range is from 0x40 to 0x9f. * Generic IOCTLS restart at 0xA0. @@ -956,24 +1204,49 @@ extern "C" { #define DRM_COMMAND_END 0xA0 /** - * Header for events written back to userspace on the drm fd. The - * type defines the type of event, the length specifies the total - * length of the event (including the header), and user_data is - * typically a 64 bit value passed with the ioctl that triggered the - * event. A read on the drm fd will always only return complete - * events, that is, if for example the read buffer is 100 bytes, and - * there are two 64 byte events pending, only one will be returned. + * struct drm_event - Header for DRM events + * @type: event type. + * @length: total number of payload bytes (including header). + * + * This struct is a header for events written back to user-space on the DRM FD. + * A read on the DRM FD will always only return complete events: e.g. if the + * read buffer is 100 bytes large and there are two 64 byte events pending, + * only one will be returned. * - * Event types 0 - 0x7fffffff are generic drm events, 0x80000000 and - * up are chipset specific. + * Event types 0 - 0x7fffffff are generic DRM events, 0x80000000 and + * up are chipset specific. Generic DRM events include &DRM_EVENT_VBLANK, + * &DRM_EVENT_FLIP_COMPLETE and &DRM_EVENT_CRTC_SEQUENCE. */ struct drm_event { __u32 type; __u32 length; }; +/** + * DRM_EVENT_VBLANK - vertical blanking event + * + * This event is sent in response to &DRM_IOCTL_WAIT_VBLANK with the + * &_DRM_VBLANK_EVENT flag set. + * + * The event payload is a struct drm_event_vblank. + */ #define DRM_EVENT_VBLANK 0x01 +/** + * DRM_EVENT_FLIP_COMPLETE - page-flip completion event + * + * This event is sent in response to an atomic commit or legacy page-flip with + * the &DRM_MODE_PAGE_FLIP_EVENT flag set. + * + * The event payload is a struct drm_event_vblank. + */ #define DRM_EVENT_FLIP_COMPLETE 0x02 +/** + * DRM_EVENT_CRTC_SEQUENCE - CRTC sequence event + * + * This event is sent in response to &DRM_IOCTL_CRTC_QUEUE_SEQUENCE. + * + * The event payload is a struct drm_event_crtc_sequence. + */ #define DRM_EVENT_CRTC_SEQUENCE 0x03 struct drm_event_vblank { diff --git a/linux-headers/include/drm/drm_fourcc.h b/linux-headers/include/drm/drm_fourcc.h index d543a502c8b..6b6235f7a7c 100644 --- a/linux-headers/include/drm/drm_fourcc.h +++ b/linux-headers/include/drm/drm_fourcc.h @@ -58,12 +58,48 @@ extern "C" { * may preserve meaning - such as number of planes - from the fourcc code, * whereas others may not. * + * Modifiers must uniquely encode buffer layout. In other words, a buffer must + * match only a single modifier. A modifier must not be a subset of layouts of + * another modifier. For instance, it's incorrect to encode pitch alignment in + * a modifier: a buffer may match a 64-pixel aligned modifier and a 32-pixel + * aligned modifier. That said, modifiers can have implicit minimal + * requirements. + * + * For modifiers where the combination of fourcc code and modifier can alias, + * a canonical pair needs to be defined and used by all drivers. Preferred + * combinations are also encouraged where all combinations might lead to + * confusion and unnecessarily reduced interoperability. An example for the + * latter is AFBC, where the ABGR layouts are preferred over ARGB layouts. + * + * There are two kinds of modifier users: + * + * - Kernel and user-space drivers: for drivers it's important that modifiers + * don't alias, otherwise two drivers might support the same format but use + * different aliases, preventing them from sharing buffers in an efficient + * format. + * - Higher-level programs interfacing with KMS/GBM/EGL/Vulkan/etc: these users + * see modifiers as opaque tokens they can check for equality and intersect. + * These users musn't need to know to reason about the modifier value + * (i.e. they are not expected to extract information out of the modifier). + * * Vendors should document their modifier usage in as much detail as * possible, to ensure maximum compatibility across devices, drivers and * applications. * * The authoritative list of format modifier codes is found in * `include/uapi/drm/drm_fourcc.h` + * + * Open Source User Waiver + * ----------------------- + * + * Because this is the authoritative source for pixel formats and modifiers + * referenced by GL, Vulkan extensions and other standards and hence used both + * by open source and closed source driver stacks, the usual requirement for an + * upstream in-kernel or open source userspace user does not apply. + * + * To ensure, as much as feasible, compatibility across stacks and avoid + * confusion with incompatible enumerations stakeholders for all relevant driver + * stacks should approve additions. */ #define fourcc_code(a, b, c, d) ((__u32)(a) | ((__u32)(b) << 8) | \ @@ -75,12 +111,42 @@ extern "C" { #define DRM_FORMAT_INVALID 0 /* color index */ +#define DRM_FORMAT_C1 fourcc_code('C', '1', ' ', ' ') /* [7:0] C0:C1:C2:C3:C4:C5:C6:C7 1:1:1:1:1:1:1:1 eight pixels/byte */ +#define DRM_FORMAT_C2 fourcc_code('C', '2', ' ', ' ') /* [7:0] C0:C1:C2:C3 2:2:2:2 four pixels/byte */ +#define DRM_FORMAT_C4 fourcc_code('C', '4', ' ', ' ') /* [7:0] C0:C1 4:4 two pixels/byte */ #define DRM_FORMAT_C8 fourcc_code('C', '8', ' ', ' ') /* [7:0] C */ -/* 8 bpp Red */ +/* 1 bpp Darkness (inverse relationship between channel value and brightness) */ +#define DRM_FORMAT_D1 fourcc_code('D', '1', ' ', ' ') /* [7:0] D0:D1:D2:D3:D4:D5:D6:D7 1:1:1:1:1:1:1:1 eight pixels/byte */ + +/* 2 bpp Darkness (inverse relationship between channel value and brightness) */ +#define DRM_FORMAT_D2 fourcc_code('D', '2', ' ', ' ') /* [7:0] D0:D1:D2:D3 2:2:2:2 four pixels/byte */ + +/* 4 bpp Darkness (inverse relationship between channel value and brightness) */ +#define DRM_FORMAT_D4 fourcc_code('D', '4', ' ', ' ') /* [7:0] D0:D1 4:4 two pixels/byte */ + +/* 8 bpp Darkness (inverse relationship between channel value and brightness) */ +#define DRM_FORMAT_D8 fourcc_code('D', '8', ' ', ' ') /* [7:0] D */ + +/* 1 bpp Red (direct relationship between channel value and brightness) */ +#define DRM_FORMAT_R1 fourcc_code('R', '1', ' ', ' ') /* [7:0] R0:R1:R2:R3:R4:R5:R6:R7 1:1:1:1:1:1:1:1 eight pixels/byte */ + +/* 2 bpp Red (direct relationship between channel value and brightness) */ +#define DRM_FORMAT_R2 fourcc_code('R', '2', ' ', ' ') /* [7:0] R0:R1:R2:R3 2:2:2:2 four pixels/byte */ + +/* 4 bpp Red (direct relationship between channel value and brightness) */ +#define DRM_FORMAT_R4 fourcc_code('R', '4', ' ', ' ') /* [7:0] R0:R1 4:4 two pixels/byte */ + +/* 8 bpp Red (direct relationship between channel value and brightness) */ #define DRM_FORMAT_R8 fourcc_code('R', '8', ' ', ' ') /* [7:0] R */ -/* 16 bpp Red */ +/* 10 bpp Red (direct relationship between channel value and brightness) */ +#define DRM_FORMAT_R10 fourcc_code('R', '1', '0', ' ') /* [15:0] x:R 6:10 little endian */ + +/* 12 bpp Red (direct relationship between channel value and brightness) */ +#define DRM_FORMAT_R12 fourcc_code('R', '1', '2', ' ') /* [15:0] x:R 4:12 little endian */ + +/* 16 bpp Red (direct relationship between channel value and brightness) */ #define DRM_FORMAT_R16 fourcc_code('R', '1', '6', ' ') /* [15:0] R little endian */ /* 16 bpp RG */ @@ -144,6 +210,13 @@ extern "C" { #define DRM_FORMAT_RGBA1010102 fourcc_code('R', 'A', '3', '0') /* [31:0] R:G:B:A 10:10:10:2 little endian */ #define DRM_FORMAT_BGRA1010102 fourcc_code('B', 'A', '3', '0') /* [31:0] B:G:R:A 10:10:10:2 little endian */ +/* 64 bpp RGB */ +#define DRM_FORMAT_XRGB16161616 fourcc_code('X', 'R', '4', '8') /* [63:0] x:R:G:B 16:16:16:16 little endian */ +#define DRM_FORMAT_XBGR16161616 fourcc_code('X', 'B', '4', '8') /* [63:0] x:B:G:R 16:16:16:16 little endian */ + +#define DRM_FORMAT_ARGB16161616 fourcc_code('A', 'R', '4', '8') /* [63:0] A:R:G:B 16:16:16:16 little endian */ +#define DRM_FORMAT_ABGR16161616 fourcc_code('A', 'B', '4', '8') /* [63:0] A:B:G:R 16:16:16:16 little endian */ + /* * Floating point 64bpp RGB * IEEE 754-2008 binary16 half-precision float @@ -155,6 +228,12 @@ extern "C" { #define DRM_FORMAT_ARGB16161616F fourcc_code('A', 'R', '4', 'H') /* [63:0] A:R:G:B 16:16:16:16 little endian */ #define DRM_FORMAT_ABGR16161616F fourcc_code('A', 'B', '4', 'H') /* [63:0] A:B:G:R 16:16:16:16 little endian */ +/* + * RGBA format with 10-bit components packed in 64-bit per pixel, with 6 bits + * of unused padding per component: + */ +#define DRM_FORMAT_AXBXGXRX106106106106 fourcc_code('A', 'B', '1', '0') /* [63:0] A:x:B:x:G:x:R:x 10:6:10:6:10:6:10:6 little endian */ + /* packed YCbCr */ #define DRM_FORMAT_YUYV fourcc_code('Y', 'U', 'Y', 'V') /* [31:0] Cr0:Y1:Cb0:Y0 8:8:8:8 little endian */ #define DRM_FORMAT_YVYU fourcc_code('Y', 'V', 'Y', 'U') /* [31:0] Cb0:Y1:Cr0:Y0 8:8:8:8 little endian */ @@ -162,7 +241,9 @@ extern "C" { #define DRM_FORMAT_VYUY fourcc_code('V', 'Y', 'U', 'Y') /* [31:0] Y1:Cb0:Y0:Cr0 8:8:8:8 little endian */ #define DRM_FORMAT_AYUV fourcc_code('A', 'Y', 'U', 'V') /* [31:0] A:Y:Cb:Cr 8:8:8:8 little endian */ +#define DRM_FORMAT_AVUY8888 fourcc_code('A', 'V', 'U', 'Y') /* [31:0] A:Cr:Cb:Y 8:8:8:8 little endian */ #define DRM_FORMAT_XYUV8888 fourcc_code('X', 'Y', 'U', 'V') /* [31:0] X:Y:Cb:Cr 8:8:8:8 little endian */ +#define DRM_FORMAT_XVUY8888 fourcc_code('X', 'V', 'U', 'Y') /* [31:0] X:Cr:Cb:Y 8:8:8:8 little endian */ #define DRM_FORMAT_VUY888 fourcc_code('V', 'U', '2', '4') /* [23:0] Cr:Cb:Y 8:8:8 little endian */ #define DRM_FORMAT_VUY101010 fourcc_code('V', 'U', '3', '0') /* Y followed by U then V, 10:10:10. Non-linear modifier only */ @@ -271,6 +352,13 @@ extern "C" { */ #define DRM_FORMAT_P016 fourcc_code('P', '0', '1', '6') /* 2x2 subsampled Cr:Cb plane 16 bits per channel */ +/* 2 plane YCbCr420. + * 3 10 bit components and 2 padding bits packed into 4 bytes. + * index 0 = Y plane, [31:0] x:Y2:Y1:Y0 2:10:10:10 little endian + * index 1 = Cr:Cb plane, [63:0] x:Cr2:Cb2:Cr1:x:Cb1:Cr0:Cb0 [2:10:10:10:2:10:10:10] little endian + */ +#define DRM_FORMAT_P030 fourcc_code('P', '0', '3', '0') /* 2x2 subsampled Cr:Cb plane 10 bits per channel packed */ + /* 3 plane non-subsampled (444) YCbCr * 16 bits per component, but only 10 bits are used and 6 bits are padded * index 0: Y plane, [15:0] Y:x [10:6] little endian @@ -320,7 +408,6 @@ extern "C" { */ /* Vendor Ids: */ -#define DRM_FORMAT_MOD_NONE 0 #define DRM_FORMAT_MOD_VENDOR_NONE 0 #define DRM_FORMAT_MOD_VENDOR_INTEL 0x01 #define DRM_FORMAT_MOD_VENDOR_AMD 0x02 @@ -337,6 +424,12 @@ extern "C" { #define DRM_FORMAT_RESERVED ((1ULL << 56) - 1) +#define fourcc_mod_get_vendor(modifier) \ + (((modifier) >> 56) & 0xff) + +#define fourcc_mod_is_vendor(modifier, vendor) \ + (fourcc_mod_get_vendor(modifier) == DRM_FORMAT_MOD_VENDOR_## vendor) + #define fourcc_mod_code(vendor, val) \ ((((__u64)DRM_FORMAT_MOD_VENDOR_## vendor) << 56) | ((val) & 0x00ffffffffffffffULL)) @@ -392,6 +485,16 @@ extern "C" { */ #define DRM_FORMAT_MOD_LINEAR fourcc_mod_code(NONE, 0) +/* + * Deprecated: use DRM_FORMAT_MOD_LINEAR instead + * + * The "none" format modifier doesn't actually mean that the modifier is + * implicit, instead it means that the layout is linear. Whether modifiers are + * used is out-of-band information carried in an API-specific way (e.g. in a + * flag for drm_mode_fb_cmd2). + */ +#define DRM_FORMAT_MOD_NONE 0 + /* Intel framebuffer modifiers */ /* @@ -488,6 +591,115 @@ extern "C" { */ #define I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS fourcc_mod_code(INTEL, 7) +/* + * Intel Color Control Surface with Clear Color (CCS) for Gen-12 render + * compression. + * + * The main surface is Y-tiled and is at plane index 0 whereas CCS is linear + * and at index 1. The clear color is stored at index 2, and the pitch should + * be 64 bytes aligned. The clear color structure is 256 bits. The first 128 bits + * represents Raw Clear Color Red, Green, Blue and Alpha color each represented + * by 32 bits. The raw clear color is consumed by the 3d engine and generates + * the converted clear color of size 64 bits. The first 32 bits store the Lower + * Converted Clear Color value and the next 32 bits store the Higher Converted + * Clear Color value when applicable. The Converted Clear Color values are + * consumed by the DE. The last 64 bits are used to store Color Discard Enable + * and Depth Clear Value Valid which are ignored by the DE. A CCS cache line + * corresponds to an area of 4x1 tiles in the main surface. The main surface + * pitch is required to be a multiple of 4 tile widths. + */ +#define I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC fourcc_mod_code(INTEL, 8) + +/* + * Intel Tile 4 layout + * + * This is a tiled layout using 4KB tiles in a row-major layout. It has the same + * shape as Tile Y at two granularities: 4KB (128B x 32) and 64B (16B x 4). It + * only differs from Tile Y at the 256B granularity in between. At this + * granularity, Tile Y has a shape of 16B x 32 rows, but this tiling has a shape + * of 64B x 8 rows. + */ +#define I915_FORMAT_MOD_4_TILED fourcc_mod_code(INTEL, 9) + +/* + * Intel color control surfaces (CCS) for DG2 render compression. + * + * The main surface is Tile 4 and at plane index 0. The CCS data is stored + * outside of the GEM object in a reserved memory area dedicated for the + * storage of the CCS data for all RC/RC_CC/MC compressible GEM objects. The + * main surface pitch is required to be a multiple of four Tile 4 widths. + */ +#define I915_FORMAT_MOD_4_TILED_DG2_RC_CCS fourcc_mod_code(INTEL, 10) + +/* + * Intel color control surfaces (CCS) for DG2 media compression. + * + * The main surface is Tile 4 and at plane index 0. For semi-planar formats + * like NV12, the Y and UV planes are Tile 4 and are located at plane indices + * 0 and 1, respectively. The CCS for all planes are stored outside of the + * GEM object in a reserved memory area dedicated for the storage of the + * CCS data for all RC/RC_CC/MC compressible GEM objects. The main surface + * pitch is required to be a multiple of four Tile 4 widths. + */ +#define I915_FORMAT_MOD_4_TILED_DG2_MC_CCS fourcc_mod_code(INTEL, 11) + +/* + * Intel Color Control Surface with Clear Color (CCS) for DG2 render compression. + * + * The main surface is Tile 4 and at plane index 0. The CCS data is stored + * outside of the GEM object in a reserved memory area dedicated for the + * storage of the CCS data for all RC/RC_CC/MC compressible GEM objects. The + * main surface pitch is required to be a multiple of four Tile 4 widths. The + * clear color is stored at plane index 1 and the pitch should be 64 bytes + * aligned. The format of the 256 bits of clear color data matches the one used + * for the I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC modifier, see its description + * for details. + */ +#define I915_FORMAT_MOD_4_TILED_DG2_RC_CCS_CC fourcc_mod_code(INTEL, 12) + +/* + * Intel Color Control Surfaces (CCS) for display ver. 14 render compression. + * + * The main surface is tile4 and at plane index 0, the CCS is linear and + * at index 1. A 64B CCS cache line corresponds to an area of 4x1 tiles in + * main surface. In other words, 4 bits in CCS map to a main surface cache + * line pair. The main surface pitch is required to be a multiple of four + * tile4 widths. + */ +#define I915_FORMAT_MOD_4_TILED_MTL_RC_CCS fourcc_mod_code(INTEL, 13) + +/* + * Intel Color Control Surfaces (CCS) for display ver. 14 media compression + * + * The main surface is tile4 and at plane index 0, the CCS is linear and + * at index 1. A 64B CCS cache line corresponds to an area of 4x1 tiles in + * main surface. In other words, 4 bits in CCS map to a main surface cache + * line pair. The main surface pitch is required to be a multiple of four + * tile4 widths. For semi-planar formats like NV12, CCS planes follow the + * Y and UV planes i.e., planes 0 and 1 are used for Y and UV surfaces, + * planes 2 and 3 for the respective CCS. + */ +#define I915_FORMAT_MOD_4_TILED_MTL_MC_CCS fourcc_mod_code(INTEL, 14) + +/* + * Intel Color Control Surface with Clear Color (CCS) for display ver. 14 render + * compression. + * + * The main surface is tile4 and is at plane index 0 whereas CCS is linear + * and at index 1. The clear color is stored at index 2, and the pitch should + * be ignored. The clear color structure is 256 bits. The first 128 bits + * represents Raw Clear Color Red, Green, Blue and Alpha color each represented + * by 32 bits. The raw clear color is consumed by the 3d engine and generates + * the converted clear color of size 64 bits. The first 32 bits store the Lower + * Converted Clear Color value and the next 32 bits store the Higher Converted + * Clear Color value when applicable. The Converted Clear Color values are + * consumed by the DE. The last 64 bits are used to store Color Discard Enable + * and Depth Clear Value Valid which are ignored by the DE. A CCS cache line + * corresponds to an area of 4x1 tiles in the main surface. The main surface + * pitch is required to be a multiple of 4 tile widths. + */ +#define I915_FORMAT_MOD_4_TILED_MTL_RC_CCS_CC fourcc_mod_code(INTEL, 15) + /* * Tiled, NV12MT, grouped in 64 (pixels) x 32 (lines) -sized macroblocks * @@ -525,6 +737,28 @@ extern "C" { */ #define DRM_FORMAT_MOD_QCOM_COMPRESSED fourcc_mod_code(QCOM, 1) +/* + * Qualcomm Tiled Format + * + * Similar to DRM_FORMAT_MOD_QCOM_COMPRESSED but not compressed. + * Implementation may be platform and base-format specific. + * + * Each macrotile consists of m x n (mostly 4 x 4) tiles. + * Pixel data pitch/stride is aligned with macrotile width. + * Pixel data height is aligned with macrotile height. + * Entire pixel data buffer is aligned with 4k(bytes). + */ +#define DRM_FORMAT_MOD_QCOM_TILED3 fourcc_mod_code(QCOM, 3) + +/* + * Qualcomm Alternate Tiled Format + * + * Alternate tiled format typically only used within GMEM. + * Implementation may be platform and base-format specific. + */ +#define DRM_FORMAT_MOD_QCOM_TILED2 fourcc_mod_code(QCOM, 2) + + /* Vivante framebuffer modifiers */ /* @@ -565,6 +799,35 @@ extern "C" { */ #define DRM_FORMAT_MOD_VIVANTE_SPLIT_SUPER_TILED fourcc_mod_code(VIVANTE, 4) +/* + * Vivante TS (tile-status) buffer modifiers. They can be combined with all of + * the color buffer tiling modifiers defined above. When TS is present it's a + * separate buffer containing the clear/compression status of each tile. The + * modifiers are defined as VIVANTE_MOD_TS_c_s, where c is the color buffer + * tile size in bytes covered by one entry in the status buffer and s is the + * number of status bits per entry. + * We reserve the top 8 bits of the Vivante modifier space for tile status + * clear/compression modifiers, as future cores might add some more TS layout + * variations. + */ +#define VIVANTE_MOD_TS_64_4 (1ULL << 48) +#define VIVANTE_MOD_TS_64_2 (2ULL << 48) +#define VIVANTE_MOD_TS_128_4 (3ULL << 48) +#define VIVANTE_MOD_TS_256_4 (4ULL << 48) +#define VIVANTE_MOD_TS_MASK (0xfULL << 48) + +/* + * Vivante compression modifiers. Those depend on a TS modifier being present + * as the TS bits get reinterpreted as compression tags instead of simple + * clear markers when compression is enabled. + */ +#define VIVANTE_MOD_COMP_DEC400 (1ULL << 52) +#define VIVANTE_MOD_COMP_MASK (0xfULL << 52) + +/* Masking out the extension bits will yield the base modifier. */ +#define VIVANTE_MOD_EXT_MASK (VIVANTE_MOD_TS_MASK | \ + VIVANTE_MOD_COMP_MASK) + /* NVIDIA frame buffer modifiers */ /* @@ -777,6 +1040,10 @@ drm_fourcc_canonicalize_nvidia_format_mod(__u64 modifier) * and UV. Some SAND-using hardware stores UV in a separate tiled * image from Y to reduce the column height, which is not supported * with these modifiers. + * + * The DRM_FORMAT_MOD_BROADCOM_SAND128_COL_HEIGHT modifier is also + * supported for DRM_FORMAT_P030 where the columns remain as 128 bytes + * wide, but as this is a 10 bpp format that translates to 96 pixels. */ #define DRM_FORMAT_MOD_BROADCOM_SAND32_COL_HEIGHT(v) \ @@ -835,9 +1102,9 @@ drm_fourcc_canonicalize_nvidia_format_mod(__u64 modifier) /* * The top 4 bits (out of the 56 bits alloted for specifying vendor specific - * modifiers) denote the category for modifiers. Currently we have only two - * categories of modifiers ie AFBC and MISC. We can have a maximum of sixteen - * different categories. + * modifiers) denote the category for modifiers. Currently we have three + * categories of modifiers ie AFBC, MISC and AFRC. We can have a maximum of + * sixteen different categories. */ #define DRM_FORMAT_MOD_ARM_CODE(__type, __val) \ fourcc_mod_code(ARM, ((__u64)(__type) << 52) | ((__val) & 0x000fffffffffffffULL)) @@ -952,6 +1219,109 @@ drm_fourcc_canonicalize_nvidia_format_mod(__u64 modifier) */ #define AFBC_FORMAT_MOD_USM (1ULL << 12) +/* + * Arm Fixed-Rate Compression (AFRC) modifiers + * + * AFRC is a proprietary fixed rate image compression protocol and format, + * designed to provide guaranteed bandwidth and memory footprint + * reductions in graphics and media use-cases. + * + * AFRC buffers consist of one or more planes, with the same components + * and meaning as an uncompressed buffer using the same pixel format. + * + * Within each plane, the pixel/luma/chroma values are grouped into + * "coding unit" blocks which are individually compressed to a + * fixed size (in bytes). All coding units within a given plane of a buffer + * store the same number of values, and have the same compressed size. + * + * The coding unit size is configurable, allowing different rates of compression. + * + * The start of each AFRC buffer plane must be aligned to an alignment granule which + * depends on the coding unit size. + * + * Coding Unit Size Plane Alignment + * ---------------- --------------- + * 16 bytes 1024 bytes + * 24 bytes 512 bytes + * 32 bytes 2048 bytes + * + * Coding units are grouped into paging tiles. AFRC buffer dimensions must be aligned + * to a multiple of the paging tile dimensions. + * The dimensions of each paging tile depend on whether the buffer is optimised for + * scanline (SCAN layout) or rotated (ROT layout) access. + * + * Layout Paging Tile Width Paging Tile Height + * ------ ----------------- ------------------ + * SCAN 16 coding units 4 coding units + * ROT 8 coding units 8 coding units + * + * The dimensions of each coding unit depend on the number of components + * in the compressed plane and whether the buffer is optimised for + * scanline (SCAN layout) or rotated (ROT layout) access. + * + * Number of Components in Plane Layout Coding Unit Width Coding Unit Height + * ----------------------------- --------- ----------------- ------------------ + * 1 SCAN 16 samples 4 samples + * Example: 16x4 luma samples in a 'Y' plane + * 16x4 chroma 'V' values, in the 'V' plane of a fully-planar YUV buffer + * ----------------------------- --------- ----------------- ------------------ + * 1 ROT 8 samples 8 samples + * Example: 8x8 luma samples in a 'Y' plane + * 8x8 chroma 'V' values, in the 'V' plane of a fully-planar YUV buffer + * ----------------------------- --------- ----------------- ------------------ + * 2 DONT CARE 8 samples 4 samples + * Example: 8x4 chroma pairs in the 'UV' plane of a semi-planar YUV buffer + * ----------------------------- --------- ----------------- ------------------ + * 3 DONT CARE 4 samples 4 samples + * Example: 4x4 pixels in an RGB buffer without alpha + * ----------------------------- --------- ----------------- ------------------ + * 4 DONT CARE 4 samples 4 samples + * Example: 4x4 pixels in an RGB buffer with alpha + */ + +#define DRM_FORMAT_MOD_ARM_TYPE_AFRC 0x02 + +#define DRM_FORMAT_MOD_ARM_AFRC(__afrc_mode) \ + DRM_FORMAT_MOD_ARM_CODE(DRM_FORMAT_MOD_ARM_TYPE_AFRC, __afrc_mode) + +/* + * AFRC coding unit size modifier. + * + * Indicates the number of bytes used to store each compressed coding unit for + * one or more planes in an AFRC encoded buffer. The coding unit size for chrominance + * is the same for both Cb and Cr, which may be stored in separate planes. + * + * AFRC_FORMAT_MOD_CU_SIZE_P0 indicates the number of bytes used to store + * each compressed coding unit in the first plane of the buffer. For RGBA buffers + * this is the only plane, while for semi-planar and fully-planar YUV buffers, + * this corresponds to the luma plane. + * + * AFRC_FORMAT_MOD_CU_SIZE_P12 indicates the number of bytes used to store + * each compressed coding unit in the second and third planes in the buffer. + * For semi-planar and fully-planar YUV buffers, this corresponds to the chroma plane(s). + * + * For single-plane buffers, AFRC_FORMAT_MOD_CU_SIZE_P0 must be specified + * and AFRC_FORMAT_MOD_CU_SIZE_P12 must be zero. + * For semi-planar and fully-planar buffers, both AFRC_FORMAT_MOD_CU_SIZE_P0 and + * AFRC_FORMAT_MOD_CU_SIZE_P12 must be specified. + */ +#define AFRC_FORMAT_MOD_CU_SIZE_MASK 0xf +#define AFRC_FORMAT_MOD_CU_SIZE_16 (1ULL) +#define AFRC_FORMAT_MOD_CU_SIZE_24 (2ULL) +#define AFRC_FORMAT_MOD_CU_SIZE_32 (3ULL) + +#define AFRC_FORMAT_MOD_CU_SIZE_P0(__afrc_cu_size) (__afrc_cu_size) +#define AFRC_FORMAT_MOD_CU_SIZE_P12(__afrc_cu_size) ((__afrc_cu_size) << 4) + +/* + * AFRC scanline memory layout. + * + * Indicates if the buffer uses the scanline-optimised layout + * for an AFRC encoded buffer, otherwise, it uses the rotation-optimised layout. + * The memory layout is the same for all planes. + */ +#define AFRC_FORMAT_MOD_LAYOUT_SCAN (1ULL << 8) + /* * Arm 16x16 Block U-Interleaved modifier * @@ -997,9 +1367,9 @@ drm_fourcc_canonicalize_nvidia_format_mod(__u64 modifier) * Not all combinations are valid, and different SoCs may support different * combinations of layout and options. */ -#define __fourcc_mod_amlogic_layout_mask 0xf +#define __fourcc_mod_amlogic_layout_mask 0xff #define __fourcc_mod_amlogic_options_shift 8 -#define __fourcc_mod_amlogic_options_mask 0xf +#define __fourcc_mod_amlogic_options_mask 0xff #define DRM_FORMAT_MOD_AMLOGIC_FBC(__layout, __options) \ fourcc_mod_code(AMLOGIC, \ @@ -1056,6 +1426,142 @@ drm_fourcc_canonicalize_nvidia_format_mod(__u64 modifier) */ #define AMLOGIC_FBC_OPTION_MEM_SAVING (1ULL << 0) +/* + * AMD modifiers + * + * Memory layout: + * + * without DCC: + * - main surface + * + * with DCC & without DCC_RETILE: + * - main surface in plane 0 + * - DCC surface in plane 1 (RB-aligned, pipe-aligned if DCC_PIPE_ALIGN is set) + * + * with DCC & DCC_RETILE: + * - main surface in plane 0 + * - displayable DCC surface in plane 1 (not RB-aligned & not pipe-aligned) + * - pipe-aligned DCC surface in plane 2 (RB-aligned & pipe-aligned) + * + * For multi-plane formats the above surfaces get merged into one plane for + * each format plane, based on the required alignment only. + * + * Bits Parameter Notes + * ----- ------------------------ --------------------------------------------- + * + * 7:0 TILE_VERSION Values are AMD_FMT_MOD_TILE_VER_* + * 12:8 TILE Values are AMD_FMT_MOD_TILE__* + * 13 DCC + * 14 DCC_RETILE + * 15 DCC_PIPE_ALIGN + * 16 DCC_INDEPENDENT_64B + * 17 DCC_INDEPENDENT_128B + * 19:18 DCC_MAX_COMPRESSED_BLOCK Values are AMD_FMT_MOD_DCC_BLOCK_* + * 20 DCC_CONSTANT_ENCODE + * 23:21 PIPE_XOR_BITS Only for some chips + * 26:24 BANK_XOR_BITS Only for some chips + * 29:27 PACKERS Only for some chips + * 32:30 RB Only for some chips + * 35:33 PIPE Only for some chips + * 55:36 - Reserved for future use, must be zero + */ +#define AMD_FMT_MOD fourcc_mod_code(AMD, 0) + +#define IS_AMD_FMT_MOD(val) (((val) >> 56) == DRM_FORMAT_MOD_VENDOR_AMD) + +/* Reserve 0 for GFX8 and older */ +#define AMD_FMT_MOD_TILE_VER_GFX9 1 +#define AMD_FMT_MOD_TILE_VER_GFX10 2 +#define AMD_FMT_MOD_TILE_VER_GFX10_RBPLUS 3 +#define AMD_FMT_MOD_TILE_VER_GFX11 4 + +/* + * 64K_S is the same for GFX9/GFX10/GFX10_RBPLUS and hence has GFX9 as canonical + * version. + */ +#define AMD_FMT_MOD_TILE_GFX9_64K_S 9 + +/* + * 64K_D for non-32 bpp is the same for GFX9/GFX10/GFX10_RBPLUS and hence has + * GFX9 as canonical version. + */ +#define AMD_FMT_MOD_TILE_GFX9_64K_D 10 +#define AMD_FMT_MOD_TILE_GFX9_64K_S_X 25 +#define AMD_FMT_MOD_TILE_GFX9_64K_D_X 26 +#define AMD_FMT_MOD_TILE_GFX9_64K_R_X 27 +#define AMD_FMT_MOD_TILE_GFX11_256K_R_X 31 + +#define AMD_FMT_MOD_DCC_BLOCK_64B 0 +#define AMD_FMT_MOD_DCC_BLOCK_128B 1 +#define AMD_FMT_MOD_DCC_BLOCK_256B 2 + +#define AMD_FMT_MOD_TILE_VERSION_SHIFT 0 +#define AMD_FMT_MOD_TILE_VERSION_MASK 0xFF +#define AMD_FMT_MOD_TILE_SHIFT 8 +#define AMD_FMT_MOD_TILE_MASK 0x1F + +/* Whether DCC compression is enabled. */ +#define AMD_FMT_MOD_DCC_SHIFT 13 +#define AMD_FMT_MOD_DCC_MASK 0x1 + +/* + * Whether to include two DCC surfaces, one which is rb & pipe aligned, and + * one which is not-aligned. + */ +#define AMD_FMT_MOD_DCC_RETILE_SHIFT 14 +#define AMD_FMT_MOD_DCC_RETILE_MASK 0x1 + +/* Only set if DCC_RETILE = false */ +#define AMD_FMT_MOD_DCC_PIPE_ALIGN_SHIFT 15 +#define AMD_FMT_MOD_DCC_PIPE_ALIGN_MASK 0x1 + +#define AMD_FMT_MOD_DCC_INDEPENDENT_64B_SHIFT 16 +#define AMD_FMT_MOD_DCC_INDEPENDENT_64B_MASK 0x1 +#define AMD_FMT_MOD_DCC_INDEPENDENT_128B_SHIFT 17 +#define AMD_FMT_MOD_DCC_INDEPENDENT_128B_MASK 0x1 +#define AMD_FMT_MOD_DCC_MAX_COMPRESSED_BLOCK_SHIFT 18 +#define AMD_FMT_MOD_DCC_MAX_COMPRESSED_BLOCK_MASK 0x3 + +/* + * DCC supports embedding some clear colors directly in the DCC surface. + * However, on older GPUs the rendering HW ignores the embedded clear color + * and prefers the driver provided color. This necessitates doing a fastclear + * eliminate operation before a process transfers control. + * + * If this bit is set that means the fastclear eliminate is not needed for these + * embeddable colors. + */ +#define AMD_FMT_MOD_DCC_CONSTANT_ENCODE_SHIFT 20 +#define AMD_FMT_MOD_DCC_CONSTANT_ENCODE_MASK 0x1 + +/* + * The below fields are for accounting for per GPU differences. These are only + * relevant for GFX9 and later and if the tile field is *_X/_T. + * + * PIPE_XOR_BITS = always needed + * BANK_XOR_BITS = only for TILE_VER_GFX9 + * PACKERS = only for TILE_VER_GFX10_RBPLUS + * RB = only for TILE_VER_GFX9 & DCC + * PIPE = only for TILE_VER_GFX9 & DCC & (DCC_RETILE | DCC_PIPE_ALIGN) + */ +#define AMD_FMT_MOD_PIPE_XOR_BITS_SHIFT 21 +#define AMD_FMT_MOD_PIPE_XOR_BITS_MASK 0x7 +#define AMD_FMT_MOD_BANK_XOR_BITS_SHIFT 24 +#define AMD_FMT_MOD_BANK_XOR_BITS_MASK 0x7 +#define AMD_FMT_MOD_PACKERS_SHIFT 27 +#define AMD_FMT_MOD_PACKERS_MASK 0x7 +#define AMD_FMT_MOD_RB_SHIFT 30 +#define AMD_FMT_MOD_RB_MASK 0x7 +#define AMD_FMT_MOD_PIPE_SHIFT 33 +#define AMD_FMT_MOD_PIPE_MASK 0x7 + +#define AMD_FMT_MOD_SET(field, value) \ + ((__u64)(value) << AMD_FMT_MOD_##field##_SHIFT) +#define AMD_FMT_MOD_GET(field, value) \ + (((value) >> AMD_FMT_MOD_##field##_SHIFT) & AMD_FMT_MOD_##field##_MASK) +#define AMD_FMT_MOD_CLEAR(field) \ + (~((__u64)AMD_FMT_MOD_##field##_MASK << AMD_FMT_MOD_##field##_SHIFT)) + #if defined(__cplusplus) } #endif diff --git a/linux-headers/include/drm/drm_mode.h b/linux-headers/include/drm/drm_mode.h index 863eda04826..ea1b639bcb2 100644 --- a/linux-headers/include/drm/drm_mode.h +++ b/linux-headers/include/drm/drm_mode.h @@ -218,6 +218,27 @@ extern "C" { #define DRM_MODE_CONTENT_PROTECTION_DESIRED 1 #define DRM_MODE_CONTENT_PROTECTION_ENABLED 2 +/** + * struct drm_mode_modeinfo - Display mode information. + * @clock: pixel clock in kHz + * @hdisplay: horizontal display size + * @hsync_start: horizontal sync start + * @hsync_end: horizontal sync end + * @htotal: horizontal total size + * @hskew: horizontal skew + * @vdisplay: vertical display size + * @vsync_start: vertical sync start + * @vsync_end: vertical sync end + * @vtotal: vertical total size + * @vscan: vertical scan + * @vrefresh: approximate vertical refresh rate in Hz + * @flags: bitmask of misc. flags, see DRM_MODE_FLAG_* defines + * @type: bitmask of type flags, see DRM_MODE_TYPE_* defines + * @name: string describing the mode resolution + * + * This is the user-space API display mode information structure. For the + * kernel version see struct drm_display_mode. + */ struct drm_mode_modeinfo { __u32 clock; __u16 hdisplay; @@ -291,16 +312,48 @@ struct drm_mode_set_plane { __u32 src_w; }; +/** + * struct drm_mode_get_plane - Get plane metadata. + * + * Userspace can perform a GETPLANE ioctl to retrieve information about a + * plane. + * + * To retrieve the number of formats supported, set @count_format_types to zero + * and call the ioctl. @count_format_types will be updated with the value. + * + * To retrieve these formats, allocate an array with the memory needed to store + * @count_format_types formats. Point @format_type_ptr to this array and call + * the ioctl again (with @count_format_types still set to the value returned in + * the first ioctl call). + */ struct drm_mode_get_plane { + /** + * @plane_id: Object ID of the plane whose information should be + * retrieved. Set by caller. + */ __u32 plane_id; + /** @crtc_id: Object ID of the current CRTC. */ __u32 crtc_id; + /** @fb_id: Object ID of the current fb. */ __u32 fb_id; + /** + * @possible_crtcs: Bitmask of CRTC's compatible with the plane. CRTC's + * are created and they receive an index, which corresponds to their + * position in the bitmask. Bit N corresponds to + * :ref:`CRTC index` N. + */ __u32 possible_crtcs; + /** @gamma_size: Never used. */ __u32 gamma_size; + /** @count_format_types: Number of formats. */ __u32 count_format_types; + /** + * @format_type_ptr: Pointer to ``__u32`` array of formats that are + * supported by the plane. These formats do not require modifiers. + */ __u64 format_type_ptr; }; @@ -367,28 +420,98 @@ enum drm_mode_subconnector { #define DRM_MODE_CONNECTOR_DPI 17 #define DRM_MODE_CONNECTOR_WRITEBACK 18 #define DRM_MODE_CONNECTOR_SPI 19 +#define DRM_MODE_CONNECTOR_USB 20 +/** + * struct drm_mode_get_connector - Get connector metadata. + * + * User-space can perform a GETCONNECTOR ioctl to retrieve information about a + * connector. User-space is expected to retrieve encoders, modes and properties + * by performing this ioctl at least twice: the first time to retrieve the + * number of elements, the second time to retrieve the elements themselves. + * + * To retrieve the number of elements, set @count_props and @count_encoders to + * zero, set @count_modes to 1, and set @modes_ptr to a temporary struct + * drm_mode_modeinfo element. + * + * To retrieve the elements, allocate arrays for @encoders_ptr, @modes_ptr, + * @props_ptr and @prop_values_ptr, then set @count_modes, @count_props and + * @count_encoders to their capacity. + * + * Performing the ioctl only twice may be racy: the number of elements may have + * changed with a hotplug event in-between the two ioctls. User-space is + * expected to retry the last ioctl until the number of elements stabilizes. + * The kernel won't fill any array which doesn't have the expected length. + * + * **Force-probing a connector** + * + * If the @count_modes field is set to zero and the DRM client is the current + * DRM master, the kernel will perform a forced probe on the connector to + * refresh the connector status, modes and EDID. A forced-probe can be slow, + * might cause flickering and the ioctl will block. + * + * User-space needs to force-probe connectors to ensure their metadata is + * up-to-date at startup and after receiving a hot-plug event. User-space + * may perform a forced-probe when the user explicitly requests it. User-space + * shouldn't perform a forced-probe in other situations. + */ struct drm_mode_get_connector { - + /** @encoders_ptr: Pointer to ``__u32`` array of object IDs. */ __u64 encoders_ptr; + /** @modes_ptr: Pointer to struct drm_mode_modeinfo array. */ __u64 modes_ptr; + /** @props_ptr: Pointer to ``__u32`` array of property IDs. */ __u64 props_ptr; + /** @prop_values_ptr: Pointer to ``__u64`` array of property values. */ __u64 prop_values_ptr; + /** @count_modes: Number of modes. */ __u32 count_modes; + /** @count_props: Number of properties. */ __u32 count_props; + /** @count_encoders: Number of encoders. */ __u32 count_encoders; - __u32 encoder_id; /**< Current Encoder */ - __u32 connector_id; /**< Id */ + /** @encoder_id: Object ID of the current encoder. */ + __u32 encoder_id; + /** @connector_id: Object ID of the connector. */ + __u32 connector_id; + /** + * @connector_type: Type of the connector. + * + * See DRM_MODE_CONNECTOR_* defines. + */ __u32 connector_type; + /** + * @connector_type_id: Type-specific connector number. + * + * This is not an object ID. This is a per-type connector number. Each + * (type, type_id) combination is unique across all connectors of a DRM + * device. + * + * The (type, type_id) combination is not a stable identifier: the + * type_id can change depending on the driver probe order. + */ __u32 connector_type_id; + /** + * @connection: Status of the connector. + * + * See enum drm_connector_status. + */ __u32 connection; - __u32 mm_width; /**< width in millimeters */ - __u32 mm_height; /**< height in millimeters */ + /** @mm_width: Width of the connected sink in millimeters. */ + __u32 mm_width; + /** @mm_height: Height of the connected sink in millimeters. */ + __u32 mm_height; + /** + * @subpixel: Subpixel order of the connected sink. + * + * See enum subpixel_order. + */ __u32 subpixel; + /** @pad: Padding, must be zero. */ __u32 pad; }; @@ -421,22 +544,74 @@ struct drm_mode_get_connector { */ #define DRM_MODE_PROP_ATOMIC 0x80000000 +/** + * struct drm_mode_property_enum - Description for an enum/bitfield entry. + * @value: numeric value for this enum entry. + * @name: symbolic name for this enum entry. + * + * See struct drm_property_enum for details. + */ struct drm_mode_property_enum { __u64 value; char name[DRM_PROP_NAME_LEN]; }; +/** + * struct drm_mode_get_property - Get property metadata. + * + * User-space can perform a GETPROPERTY ioctl to retrieve information about a + * property. The same property may be attached to multiple objects, see + * "Modeset Base Object Abstraction". + * + * The meaning of the @values_ptr field changes depending on the property type. + * See &drm_property.flags for more details. + * + * The @enum_blob_ptr and @count_enum_blobs fields are only meaningful when the + * property has the type &DRM_MODE_PROP_ENUM or &DRM_MODE_PROP_BITMASK. For + * backwards compatibility, the kernel will always set @count_enum_blobs to + * zero when the property has the type &DRM_MODE_PROP_BLOB. User-space must + * ignore these two fields if the property has a different type. + * + * User-space is expected to retrieve values and enums by performing this ioctl + * at least twice: the first time to retrieve the number of elements, the + * second time to retrieve the elements themselves. + * + * To retrieve the number of elements, set @count_values and @count_enum_blobs + * to zero, then call the ioctl. @count_values will be updated with the number + * of elements. If the property has the type &DRM_MODE_PROP_ENUM or + * &DRM_MODE_PROP_BITMASK, @count_enum_blobs will be updated as well. + * + * To retrieve the elements themselves, allocate an array for @values_ptr and + * set @count_values to its capacity. If the property has the type + * &DRM_MODE_PROP_ENUM or &DRM_MODE_PROP_BITMASK, allocate an array for + * @enum_blob_ptr and set @count_enum_blobs to its capacity. Calling the ioctl + * again will fill the arrays. + */ struct drm_mode_get_property { - __u64 values_ptr; /* values and blob lengths */ - __u64 enum_blob_ptr; /* enum and blob id ptrs */ + /** @values_ptr: Pointer to a ``__u64`` array. */ + __u64 values_ptr; + /** @enum_blob_ptr: Pointer to a struct drm_mode_property_enum array. */ + __u64 enum_blob_ptr; + /** + * @prop_id: Object ID of the property which should be retrieved. Set + * by the caller. + */ __u32 prop_id; + /** + * @flags: ``DRM_MODE_PROP_*`` bitfield. See &drm_property.flags for + * a definition of the flags. + */ __u32 flags; + /** + * @name: Symbolic property name. User-space should use this field to + * recognize properties. + */ char name[DRM_PROP_NAME_LEN]; + /** @count_values: Number of elements in @values_ptr. */ __u32 count_values; - /* This is only used to count enum values, not blobs. The _blobs is - * simply because of a historical reason, i.e. backwards compat. */ + /** @count_enum_blobs: Number of elements in @enum_blob_ptr. */ __u32 count_enum_blobs; }; @@ -491,41 +666,73 @@ struct drm_mode_fb_cmd { #define DRM_MODE_FB_INTERLACED (1<<0) /* for interlaced framebuffers */ #define DRM_MODE_FB_MODIFIERS (1<<1) /* enables ->modifer[] */ +/** + * struct drm_mode_fb_cmd2 - Frame-buffer metadata. + * + * This struct holds frame-buffer metadata. There are two ways to use it: + * + * - User-space can fill this struct and perform a &DRM_IOCTL_MODE_ADDFB2 + * ioctl to register a new frame-buffer. The new frame-buffer object ID will + * be set by the kernel in @fb_id. + * - User-space can set @fb_id and perform a &DRM_IOCTL_MODE_GETFB2 ioctl to + * fetch metadata about an existing frame-buffer. + * + * In case of planar formats, this struct allows up to 4 buffer objects with + * offsets and pitches per plane. The pitch and offset order are dictated by + * the format FourCC as defined by ``drm_fourcc.h``, e.g. NV12 is described as: + * + * YUV 4:2:0 image with a plane of 8-bit Y samples followed by an + * interleaved U/V plane containing 8-bit 2x2 subsampled colour difference + * samples. + * + * So it would consist of a Y plane at ``offsets[0]`` and a UV plane at + * ``offsets[1]``. + * + * To accommodate tiled, compressed, etc formats, a modifier can be specified. + * For more information see the "Format Modifiers" section. Note that even + * though it looks like we have a modifier per-plane, we in fact do not. The + * modifier for each plane must be identical. Thus all combinations of + * different data layouts for multi-plane formats must be enumerated as + * separate modifiers. + * + * All of the entries in @handles, @pitches, @offsets and @modifier must be + * zero when unused. Warning, for @offsets and @modifier zero can't be used to + * figure out whether the entry is used or not since it's a valid value (a zero + * offset is common, and a zero modifier is &DRM_FORMAT_MOD_LINEAR). + */ struct drm_mode_fb_cmd2 { + /** @fb_id: Object ID of the frame-buffer. */ __u32 fb_id; + /** @width: Width of the frame-buffer. */ __u32 width; + /** @height: Height of the frame-buffer. */ __u32 height; - __u32 pixel_format; /* fourcc code from drm_fourcc.h */ - __u32 flags; /* see above flags */ + /** + * @pixel_format: FourCC format code, see ``DRM_FORMAT_*`` constants in + * ``drm_fourcc.h``. + */ + __u32 pixel_format; + /** + * @flags: Frame-buffer flags (see &DRM_MODE_FB_INTERLACED and + * &DRM_MODE_FB_MODIFIERS). + */ + __u32 flags; - /* - * In case of planar formats, this ioctl allows up to 4 - * buffer objects with offsets and pitches per plane. - * The pitch and offset order is dictated by the fourcc, - * e.g. NV12 (https://fourcc.org/yuv.php#NV12) is described as: - * - * YUV 4:2:0 image with a plane of 8 bit Y samples - * followed by an interleaved U/V plane containing - * 8 bit 2x2 subsampled colour difference samples. - * - * So it would consist of Y as offsets[0] and UV as - * offsets[1]. Note that offsets[0] will generally - * be 0 (but this is not required). - * - * To accommodate tiled, compressed, etc formats, a - * modifier can be specified. The default value of zero - * indicates "native" format as specified by the fourcc. - * Vendor specific modifier token. Note that even though - * it looks like we have a modifier per-plane, we in fact - * do not. The modifier for each plane must be identical. - * Thus all combinations of different data layouts for - * multi plane formats must be enumerated as separate - * modifiers. + /** + * @handles: GEM buffer handle, one per plane. Set to 0 if the plane is + * unused. The same handle can be used for multiple planes. */ __u32 handles[4]; - __u32 pitches[4]; /* pitch for each plane */ - __u32 offsets[4]; /* offset of each plane */ - __u64 modifier[4]; /* ie, tiling, compress */ + /** @pitches: Pitch (aka. stride) in bytes, one per plane. */ + __u32 pitches[4]; + /** @offsets: Offset into the buffer in bytes, one per plane. */ + __u32 offsets[4]; + /** + * @modifier: Format modifier, one per plane. See ``DRM_FORMAT_MOD_*`` + * constants in ``drm_fourcc.h``. All planes must use the same + * modifier. Ignored unless &DRM_MODE_FB_MODIFIERS is set in @flags. + */ + __u64 modifier[4]; }; #define DRM_MODE_FB_DIRTY_ANNOTATE_COPY 0x01 @@ -630,6 +837,11 @@ struct drm_color_ctm { /* * Conversion matrix in S31.32 sign-magnitude * (not two's complement!) format. + * + * out matrix in + * |R| |0 1 2| |R| + * |G| = |3 4 5| x |G| + * |B| |6 7 8| |B| */ __u64 matrix[9]; }; @@ -674,7 +886,7 @@ struct hdr_metadata_infoframe { */ struct { __u16 x, y; - } display_primaries[3]; + } display_primaries[3]; /** * @white_point: White Point of Colorspace Data. * These are coded as unsigned 16-bit values in units of @@ -685,7 +897,7 @@ struct hdr_metadata_infoframe { */ struct { __u16 x, y; - } white_point; + } white_point; /** * @max_display_mastering_luminance: Max Mastering Display Luminance. * This value is coded as an unsigned 16-bit value in units of 1 cd/m2, @@ -731,12 +943,31 @@ struct hdr_output_metadata { }; }; +/** + * DRM_MODE_PAGE_FLIP_EVENT + * + * Request that the kernel sends back a vblank event (see + * struct drm_event_vblank) with the &DRM_EVENT_FLIP_COMPLETE type when the + * page-flip is done. + */ #define DRM_MODE_PAGE_FLIP_EVENT 0x01 +/** + * DRM_MODE_PAGE_FLIP_ASYNC + * + * Request that the page-flip is performed as soon as possible, ie. with no + * delay due to waiting for vblank. This may cause tearing to be visible on + * the screen. + */ #define DRM_MODE_PAGE_FLIP_ASYNC 0x02 #define DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE 0x4 #define DRM_MODE_PAGE_FLIP_TARGET_RELATIVE 0x8 #define DRM_MODE_PAGE_FLIP_TARGET (DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE | \ DRM_MODE_PAGE_FLIP_TARGET_RELATIVE) +/** + * DRM_MODE_PAGE_FLIP_FLAGS + * + * Bitmask of flags suitable for &drm_mode_crtc_page_flip_target.flags. + */ #define DRM_MODE_PAGE_FLIP_FLAGS (DRM_MODE_PAGE_FLIP_EVENT | \ DRM_MODE_PAGE_FLIP_ASYNC | \ DRM_MODE_PAGE_FLIP_TARGET) @@ -830,11 +1061,53 @@ struct drm_mode_destroy_dumb { __u32 handle; }; -/* page-flip flags are valid, plus: */ +/** + * DRM_MODE_ATOMIC_TEST_ONLY + * + * Do not apply the atomic commit, instead check whether the hardware supports + * this configuration. + * + * See &drm_mode_config_funcs.atomic_check for more details on test-only + * commits. + */ #define DRM_MODE_ATOMIC_TEST_ONLY 0x0100 +/** + * DRM_MODE_ATOMIC_NONBLOCK + * + * Do not block while applying the atomic commit. The &DRM_IOCTL_MODE_ATOMIC + * IOCTL returns immediately instead of waiting for the changes to be applied + * in hardware. Note, the driver will still check that the update can be + * applied before retuning. + */ #define DRM_MODE_ATOMIC_NONBLOCK 0x0200 +/** + * DRM_MODE_ATOMIC_ALLOW_MODESET + * + * Allow the update to result in temporary or transient visible artifacts while + * the update is being applied. Applying the update may also take significantly + * more time than a page flip. All visual artifacts will disappear by the time + * the update is completed, as signalled through the vblank event's timestamp + * (see struct drm_event_vblank). + * + * This flag must be set when the KMS update might cause visible artifacts. + * Without this flag such KMS update will return a EINVAL error. What kind of + * update may cause visible artifacts depends on the driver and the hardware. + * User-space that needs to know beforehand if an update might cause visible + * artifacts can use &DRM_MODE_ATOMIC_TEST_ONLY without + * &DRM_MODE_ATOMIC_ALLOW_MODESET to see if it fails. + * + * To the best of the driver's knowledge, visual artifacts are guaranteed to + * not appear when this flag is not set. Some sinks might display visual + * artifacts outside of the driver's control. + */ #define DRM_MODE_ATOMIC_ALLOW_MODESET 0x0400 +/** + * DRM_MODE_ATOMIC_FLAGS + * + * Bitfield of flags accepted by the &DRM_IOCTL_MODE_ATOMIC IOCTL in + * &drm_mode_atomic.flags. + */ #define DRM_MODE_ATOMIC_FLAGS (\ DRM_MODE_PAGE_FLIP_EVENT |\ DRM_MODE_PAGE_FLIP_ASYNC |\ @@ -904,26 +1177,31 @@ struct drm_format_modifier { }; /** - * struct drm_mode_create_blob - Create New block property - * @data: Pointer to data to copy. - * @length: Length of data to copy. - * @blob_id: new property ID. + * struct drm_mode_create_blob - Create New blob property + * * Create a new 'blob' data property, copying length bytes from data pointer, * and returning new blob ID. */ struct drm_mode_create_blob { - /** Pointer to data to copy. */ + /** @data: Pointer to data to copy. */ __u64 data; - /** Length of data to copy. */ + /** @length: Length of data to copy. */ __u32 length; - /** Return: new property ID. */ + /** @blob_id: Return: new property ID. */ __u32 blob_id; }; /** * struct drm_mode_destroy_blob - Destroy user blob * @blob_id: blob_id to destroy + * * Destroy a user-created blob property. + * + * User-space can release blobs as soon as they do not need to refer to them by + * their blob object ID. For instance, if you are using a MODE_ID blob in an + * atomic commit and you will not make another commit re-using the same ID, you + * can destroy the blob as soon as the commit has been issued, without waiting + * for it to complete. */ struct drm_mode_destroy_blob { __u32 blob_id; @@ -931,36 +1209,36 @@ struct drm_mode_destroy_blob { /** * struct drm_mode_create_lease - Create lease - * @object_ids: Pointer to array of object ids. - * @object_count: Number of object ids. - * @flags: flags for new FD. - * @lessee_id: unique identifier for lessee. - * @fd: file descriptor to new drm_master file. + * * Lease mode resources, creating another drm_master. + * + * The @object_ids array must reference at least one CRTC, one connector and + * one plane if &DRM_CLIENT_CAP_UNIVERSAL_PLANES is enabled. Alternatively, + * the lease can be completely empty. */ struct drm_mode_create_lease { - /** Pointer to array of object ids (__u32) */ + /** @object_ids: Pointer to array of object ids (__u32) */ __u64 object_ids; - /** Number of object ids */ + /** @object_count: Number of object ids */ __u32 object_count; - /** flags for new FD (O_CLOEXEC, etc) */ + /** @flags: flags for new FD (O_CLOEXEC, etc) */ __u32 flags; - /** Return: unique identifier for lessee. */ + /** @lessee_id: Return: unique identifier for lessee. */ __u32 lessee_id; - /** Return: file descriptor to new drm_master file */ + /** @fd: Return: file descriptor to new drm_master file */ __u32 fd; }; /** * struct drm_mode_list_lessees - List lessees - * @count_lessees: Number of lessees. - * @pad: pad. - * @lessees_ptr: Pointer to lessess. - * List lesses from a drm_master + * + * List lesses from a drm_master. */ struct drm_mode_list_lessees { - /** Number of lessees. + /** + * @count_lessees: Number of lessees. + * * On input, provides length of the array. * On output, provides total number. No * more than the input number will be written @@ -968,23 +1246,26 @@ struct drm_mode_list_lessees { * the size and then the data. */ __u32 count_lessees; + /** @pad: Padding. */ __u32 pad; - /** Pointer to lessees. - * pointer to __u64 array of lessee ids + /** + * @lessees_ptr: Pointer to lessees. + * + * Pointer to __u64 array of lessee ids */ __u64 lessees_ptr; }; /** * struct drm_mode_get_lease - Get Lease - * @count_objects: Number of leased objects. - * @pad: pad. - * @objects_ptr: Pointer to objects. - * Get leased objects + * + * Get leased objects. */ struct drm_mode_get_lease { - /** Number of leased objects. + /** + * @count_objects: Number of leased objects. + * * On input, provides length of the array. * On output, provides total number. No * more than the input number will be written @@ -992,22 +1273,22 @@ struct drm_mode_get_lease { * the size and then the data. */ __u32 count_objects; + /** @pad: Padding. */ __u32 pad; - /** Pointer to objects. - * pointer to __u32 array of object ids + /** + * @objects_ptr: Pointer to objects. + * + * Pointer to __u32 array of object ids. */ __u64 objects_ptr; }; /** * struct drm_mode_revoke_lease - Revoke lease - * @lessee_id: Unique ID of lessee. - * Revoke lease */ struct drm_mode_revoke_lease { - /** Unique ID of lessee - */ + /** @lessee_id: Unique ID of lessee */ __u32 lessee_id; }; diff --git a/linux-headers/include/drm/etnaviv_drm.h b/linux-headers/include/drm/etnaviv_drm.h index 09d0df8b71c..af024d90453 100644 --- a/linux-headers/include/drm/etnaviv_drm.h +++ b/linux-headers/include/drm/etnaviv_drm.h @@ -74,6 +74,9 @@ struct drm_etnaviv_timespec { #define ETNAVIV_PARAM_GPU_NUM_CONSTANTS 0x19 #define ETNAVIV_PARAM_GPU_NUM_VARYINGS 0x1a #define ETNAVIV_PARAM_SOFTPIN_START_ADDR 0x1b +#define ETNAVIV_PARAM_GPU_PRODUCT_ID 0x1c +#define ETNAVIV_PARAM_GPU_CUSTOMER_ID 0x1d +#define ETNAVIV_PARAM_GPU_ECO_ID 0x1e #define ETNA_MAX_PIPES 4 diff --git a/linux-headers/include/drm/habanalabs_accel.h b/linux-headers/include/drm/habanalabs_accel.h new file mode 100644 index 00000000000..e6436f3e8ea --- /dev/null +++ b/linux-headers/include/drm/habanalabs_accel.h @@ -0,0 +1,2324 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note + * + * Copyright 2016-2022 HabanaLabs, Ltd. + * All Rights Reserved. + * + */ + +#ifndef HABANALABS_H_ +#define HABANALABS_H_ + +#include +#include + +/* + * Defines that are asic-specific but constitutes as ABI between kernel driver + * and userspace + */ +#define GOYA_KMD_SRAM_RESERVED_SIZE_FROM_START 0x8000 /* 32KB */ +#define GAUDI_DRIVER_SRAM_RESERVED_SIZE_FROM_START 0x80 /* 128 bytes */ + +/* + * 128 SOBs reserved for collective wait + * 16 SOBs reserved for sync stream + */ +#define GAUDI_FIRST_AVAILABLE_W_S_SYNC_OBJECT 144 + +/* + * 64 monitors reserved for collective wait + * 8 monitors reserved for sync stream + */ +#define GAUDI_FIRST_AVAILABLE_W_S_MONITOR 72 + +/* Max number of elements in timestamps registration buffers */ +#define TS_MAX_ELEMENTS_NUM (1 << 20) /* 1MB */ + +/* + * Goya queue Numbering + * + * The external queues (PCI DMA channels) MUST be before the internal queues + * and each group (PCI DMA channels and internal) must be contiguous inside + * itself but there can be a gap between the two groups (although not + * recommended) + */ + +enum goya_queue_id { + GOYA_QUEUE_ID_DMA_0 = 0, + GOYA_QUEUE_ID_DMA_1 = 1, + GOYA_QUEUE_ID_DMA_2 = 2, + GOYA_QUEUE_ID_DMA_3 = 3, + GOYA_QUEUE_ID_DMA_4 = 4, + GOYA_QUEUE_ID_CPU_PQ = 5, + GOYA_QUEUE_ID_MME = 6, /* Internal queues start here */ + GOYA_QUEUE_ID_TPC0 = 7, + GOYA_QUEUE_ID_TPC1 = 8, + GOYA_QUEUE_ID_TPC2 = 9, + GOYA_QUEUE_ID_TPC3 = 10, + GOYA_QUEUE_ID_TPC4 = 11, + GOYA_QUEUE_ID_TPC5 = 12, + GOYA_QUEUE_ID_TPC6 = 13, + GOYA_QUEUE_ID_TPC7 = 14, + GOYA_QUEUE_ID_SIZE +}; + +/* + * Gaudi queue Numbering + * External queues (PCI DMA channels) are DMA_0_*, DMA_1_* and DMA_5_*. + * Except one CPU queue, all the rest are internal queues. + */ + +enum gaudi_queue_id { + GAUDI_QUEUE_ID_DMA_0_0 = 0, /* external */ + GAUDI_QUEUE_ID_DMA_0_1 = 1, /* external */ + GAUDI_QUEUE_ID_DMA_0_2 = 2, /* external */ + GAUDI_QUEUE_ID_DMA_0_3 = 3, /* external */ + GAUDI_QUEUE_ID_DMA_1_0 = 4, /* external */ + GAUDI_QUEUE_ID_DMA_1_1 = 5, /* external */ + GAUDI_QUEUE_ID_DMA_1_2 = 6, /* external */ + GAUDI_QUEUE_ID_DMA_1_3 = 7, /* external */ + GAUDI_QUEUE_ID_CPU_PQ = 8, /* CPU */ + GAUDI_QUEUE_ID_DMA_2_0 = 9, /* internal */ + GAUDI_QUEUE_ID_DMA_2_1 = 10, /* internal */ + GAUDI_QUEUE_ID_DMA_2_2 = 11, /* internal */ + GAUDI_QUEUE_ID_DMA_2_3 = 12, /* internal */ + GAUDI_QUEUE_ID_DMA_3_0 = 13, /* internal */ + GAUDI_QUEUE_ID_DMA_3_1 = 14, /* internal */ + GAUDI_QUEUE_ID_DMA_3_2 = 15, /* internal */ + GAUDI_QUEUE_ID_DMA_3_3 = 16, /* internal */ + GAUDI_QUEUE_ID_DMA_4_0 = 17, /* internal */ + GAUDI_QUEUE_ID_DMA_4_1 = 18, /* internal */ + GAUDI_QUEUE_ID_DMA_4_2 = 19, /* internal */ + GAUDI_QUEUE_ID_DMA_4_3 = 20, /* internal */ + GAUDI_QUEUE_ID_DMA_5_0 = 21, /* internal */ + GAUDI_QUEUE_ID_DMA_5_1 = 22, /* internal */ + GAUDI_QUEUE_ID_DMA_5_2 = 23, /* internal */ + GAUDI_QUEUE_ID_DMA_5_3 = 24, /* internal */ + GAUDI_QUEUE_ID_DMA_6_0 = 25, /* internal */ + GAUDI_QUEUE_ID_DMA_6_1 = 26, /* internal */ + GAUDI_QUEUE_ID_DMA_6_2 = 27, /* internal */ + GAUDI_QUEUE_ID_DMA_6_3 = 28, /* internal */ + GAUDI_QUEUE_ID_DMA_7_0 = 29, /* internal */ + GAUDI_QUEUE_ID_DMA_7_1 = 30, /* internal */ + GAUDI_QUEUE_ID_DMA_7_2 = 31, /* internal */ + GAUDI_QUEUE_ID_DMA_7_3 = 32, /* internal */ + GAUDI_QUEUE_ID_MME_0_0 = 33, /* internal */ + GAUDI_QUEUE_ID_MME_0_1 = 34, /* internal */ + GAUDI_QUEUE_ID_MME_0_2 = 35, /* internal */ + GAUDI_QUEUE_ID_MME_0_3 = 36, /* internal */ + GAUDI_QUEUE_ID_MME_1_0 = 37, /* internal */ + GAUDI_QUEUE_ID_MME_1_1 = 38, /* internal */ + GAUDI_QUEUE_ID_MME_1_2 = 39, /* internal */ + GAUDI_QUEUE_ID_MME_1_3 = 40, /* internal */ + GAUDI_QUEUE_ID_TPC_0_0 = 41, /* internal */ + GAUDI_QUEUE_ID_TPC_0_1 = 42, /* internal */ + GAUDI_QUEUE_ID_TPC_0_2 = 43, /* internal */ + GAUDI_QUEUE_ID_TPC_0_3 = 44, /* internal */ + GAUDI_QUEUE_ID_TPC_1_0 = 45, /* internal */ + GAUDI_QUEUE_ID_TPC_1_1 = 46, /* internal */ + GAUDI_QUEUE_ID_TPC_1_2 = 47, /* internal */ + GAUDI_QUEUE_ID_TPC_1_3 = 48, /* internal */ + GAUDI_QUEUE_ID_TPC_2_0 = 49, /* internal */ + GAUDI_QUEUE_ID_TPC_2_1 = 50, /* internal */ + GAUDI_QUEUE_ID_TPC_2_2 = 51, /* internal */ + GAUDI_QUEUE_ID_TPC_2_3 = 52, /* internal */ + GAUDI_QUEUE_ID_TPC_3_0 = 53, /* internal */ + GAUDI_QUEUE_ID_TPC_3_1 = 54, /* internal */ + GAUDI_QUEUE_ID_TPC_3_2 = 55, /* internal */ + GAUDI_QUEUE_ID_TPC_3_3 = 56, /* internal */ + GAUDI_QUEUE_ID_TPC_4_0 = 57, /* internal */ + GAUDI_QUEUE_ID_TPC_4_1 = 58, /* internal */ + GAUDI_QUEUE_ID_TPC_4_2 = 59, /* internal */ + GAUDI_QUEUE_ID_TPC_4_3 = 60, /* internal */ + GAUDI_QUEUE_ID_TPC_5_0 = 61, /* internal */ + GAUDI_QUEUE_ID_TPC_5_1 = 62, /* internal */ + GAUDI_QUEUE_ID_TPC_5_2 = 63, /* internal */ + GAUDI_QUEUE_ID_TPC_5_3 = 64, /* internal */ + GAUDI_QUEUE_ID_TPC_6_0 = 65, /* internal */ + GAUDI_QUEUE_ID_TPC_6_1 = 66, /* internal */ + GAUDI_QUEUE_ID_TPC_6_2 = 67, /* internal */ + GAUDI_QUEUE_ID_TPC_6_3 = 68, /* internal */ + GAUDI_QUEUE_ID_TPC_7_0 = 69, /* internal */ + GAUDI_QUEUE_ID_TPC_7_1 = 70, /* internal */ + GAUDI_QUEUE_ID_TPC_7_2 = 71, /* internal */ + GAUDI_QUEUE_ID_TPC_7_3 = 72, /* internal */ + GAUDI_QUEUE_ID_NIC_0_0 = 73, /* internal */ + GAUDI_QUEUE_ID_NIC_0_1 = 74, /* internal */ + GAUDI_QUEUE_ID_NIC_0_2 = 75, /* internal */ + GAUDI_QUEUE_ID_NIC_0_3 = 76, /* internal */ + GAUDI_QUEUE_ID_NIC_1_0 = 77, /* internal */ + GAUDI_QUEUE_ID_NIC_1_1 = 78, /* internal */ + GAUDI_QUEUE_ID_NIC_1_2 = 79, /* internal */ + GAUDI_QUEUE_ID_NIC_1_3 = 80, /* internal */ + GAUDI_QUEUE_ID_NIC_2_0 = 81, /* internal */ + GAUDI_QUEUE_ID_NIC_2_1 = 82, /* internal */ + GAUDI_QUEUE_ID_NIC_2_2 = 83, /* internal */ + GAUDI_QUEUE_ID_NIC_2_3 = 84, /* internal */ + GAUDI_QUEUE_ID_NIC_3_0 = 85, /* internal */ + GAUDI_QUEUE_ID_NIC_3_1 = 86, /* internal */ + GAUDI_QUEUE_ID_NIC_3_2 = 87, /* internal */ + GAUDI_QUEUE_ID_NIC_3_3 = 88, /* internal */ + GAUDI_QUEUE_ID_NIC_4_0 = 89, /* internal */ + GAUDI_QUEUE_ID_NIC_4_1 = 90, /* internal */ + GAUDI_QUEUE_ID_NIC_4_2 = 91, /* internal */ + GAUDI_QUEUE_ID_NIC_4_3 = 92, /* internal */ + GAUDI_QUEUE_ID_NIC_5_0 = 93, /* internal */ + GAUDI_QUEUE_ID_NIC_5_1 = 94, /* internal */ + GAUDI_QUEUE_ID_NIC_5_2 = 95, /* internal */ + GAUDI_QUEUE_ID_NIC_5_3 = 96, /* internal */ + GAUDI_QUEUE_ID_NIC_6_0 = 97, /* internal */ + GAUDI_QUEUE_ID_NIC_6_1 = 98, /* internal */ + GAUDI_QUEUE_ID_NIC_6_2 = 99, /* internal */ + GAUDI_QUEUE_ID_NIC_6_3 = 100, /* internal */ + GAUDI_QUEUE_ID_NIC_7_0 = 101, /* internal */ + GAUDI_QUEUE_ID_NIC_7_1 = 102, /* internal */ + GAUDI_QUEUE_ID_NIC_7_2 = 103, /* internal */ + GAUDI_QUEUE_ID_NIC_7_3 = 104, /* internal */ + GAUDI_QUEUE_ID_NIC_8_0 = 105, /* internal */ + GAUDI_QUEUE_ID_NIC_8_1 = 106, /* internal */ + GAUDI_QUEUE_ID_NIC_8_2 = 107, /* internal */ + GAUDI_QUEUE_ID_NIC_8_3 = 108, /* internal */ + GAUDI_QUEUE_ID_NIC_9_0 = 109, /* internal */ + GAUDI_QUEUE_ID_NIC_9_1 = 110, /* internal */ + GAUDI_QUEUE_ID_NIC_9_2 = 111, /* internal */ + GAUDI_QUEUE_ID_NIC_9_3 = 112, /* internal */ + GAUDI_QUEUE_ID_SIZE +}; + +/* + * In GAUDI2 we have two modes of operation in regard to queues: + * 1. Legacy mode, where each QMAN exposes 4 streams to the user + * 2. F/W mode, where we use F/W to schedule the JOBS to the different queues. + * + * When in legacy mode, the user sends the queue id per JOB according to + * enum gaudi2_queue_id below. + * + * When in F/W mode, the user sends a stream id per Command Submission. The + * stream id is a running number from 0 up to (N-1), where N is the number + * of streams the F/W exposes and is passed to the user in + * struct hl_info_hw_ip_info + */ + +enum gaudi2_queue_id { + GAUDI2_QUEUE_ID_PDMA_0_0 = 0, + GAUDI2_QUEUE_ID_PDMA_0_1 = 1, + GAUDI2_QUEUE_ID_PDMA_0_2 = 2, + GAUDI2_QUEUE_ID_PDMA_0_3 = 3, + GAUDI2_QUEUE_ID_PDMA_1_0 = 4, + GAUDI2_QUEUE_ID_PDMA_1_1 = 5, + GAUDI2_QUEUE_ID_PDMA_1_2 = 6, + GAUDI2_QUEUE_ID_PDMA_1_3 = 7, + GAUDI2_QUEUE_ID_DCORE0_EDMA_0_0 = 8, + GAUDI2_QUEUE_ID_DCORE0_EDMA_0_1 = 9, + GAUDI2_QUEUE_ID_DCORE0_EDMA_0_2 = 10, + GAUDI2_QUEUE_ID_DCORE0_EDMA_0_3 = 11, + GAUDI2_QUEUE_ID_DCORE0_EDMA_1_0 = 12, + GAUDI2_QUEUE_ID_DCORE0_EDMA_1_1 = 13, + GAUDI2_QUEUE_ID_DCORE0_EDMA_1_2 = 14, + GAUDI2_QUEUE_ID_DCORE0_EDMA_1_3 = 15, + GAUDI2_QUEUE_ID_DCORE0_MME_0_0 = 16, + GAUDI2_QUEUE_ID_DCORE0_MME_0_1 = 17, + GAUDI2_QUEUE_ID_DCORE0_MME_0_2 = 18, + GAUDI2_QUEUE_ID_DCORE0_MME_0_3 = 19, + GAUDI2_QUEUE_ID_DCORE0_TPC_0_0 = 20, + GAUDI2_QUEUE_ID_DCORE0_TPC_0_1 = 21, + GAUDI2_QUEUE_ID_DCORE0_TPC_0_2 = 22, + GAUDI2_QUEUE_ID_DCORE0_TPC_0_3 = 23, + GAUDI2_QUEUE_ID_DCORE0_TPC_1_0 = 24, + GAUDI2_QUEUE_ID_DCORE0_TPC_1_1 = 25, + GAUDI2_QUEUE_ID_DCORE0_TPC_1_2 = 26, + GAUDI2_QUEUE_ID_DCORE0_TPC_1_3 = 27, + GAUDI2_QUEUE_ID_DCORE0_TPC_2_0 = 28, + GAUDI2_QUEUE_ID_DCORE0_TPC_2_1 = 29, + GAUDI2_QUEUE_ID_DCORE0_TPC_2_2 = 30, + GAUDI2_QUEUE_ID_DCORE0_TPC_2_3 = 31, + GAUDI2_QUEUE_ID_DCORE0_TPC_3_0 = 32, + GAUDI2_QUEUE_ID_DCORE0_TPC_3_1 = 33, + GAUDI2_QUEUE_ID_DCORE0_TPC_3_2 = 34, + GAUDI2_QUEUE_ID_DCORE0_TPC_3_3 = 35, + GAUDI2_QUEUE_ID_DCORE0_TPC_4_0 = 36, + GAUDI2_QUEUE_ID_DCORE0_TPC_4_1 = 37, + GAUDI2_QUEUE_ID_DCORE0_TPC_4_2 = 38, + GAUDI2_QUEUE_ID_DCORE0_TPC_4_3 = 39, + GAUDI2_QUEUE_ID_DCORE0_TPC_5_0 = 40, + GAUDI2_QUEUE_ID_DCORE0_TPC_5_1 = 41, + GAUDI2_QUEUE_ID_DCORE0_TPC_5_2 = 42, + GAUDI2_QUEUE_ID_DCORE0_TPC_5_3 = 43, + GAUDI2_QUEUE_ID_DCORE0_TPC_6_0 = 44, + GAUDI2_QUEUE_ID_DCORE0_TPC_6_1 = 45, + GAUDI2_QUEUE_ID_DCORE0_TPC_6_2 = 46, + GAUDI2_QUEUE_ID_DCORE0_TPC_6_3 = 47, + GAUDI2_QUEUE_ID_DCORE1_EDMA_0_0 = 48, + GAUDI2_QUEUE_ID_DCORE1_EDMA_0_1 = 49, + GAUDI2_QUEUE_ID_DCORE1_EDMA_0_2 = 50, + GAUDI2_QUEUE_ID_DCORE1_EDMA_0_3 = 51, + GAUDI2_QUEUE_ID_DCORE1_EDMA_1_0 = 52, + GAUDI2_QUEUE_ID_DCORE1_EDMA_1_1 = 53, + GAUDI2_QUEUE_ID_DCORE1_EDMA_1_2 = 54, + GAUDI2_QUEUE_ID_DCORE1_EDMA_1_3 = 55, + GAUDI2_QUEUE_ID_DCORE1_MME_0_0 = 56, + GAUDI2_QUEUE_ID_DCORE1_MME_0_1 = 57, + GAUDI2_QUEUE_ID_DCORE1_MME_0_2 = 58, + GAUDI2_QUEUE_ID_DCORE1_MME_0_3 = 59, + GAUDI2_QUEUE_ID_DCORE1_TPC_0_0 = 60, + GAUDI2_QUEUE_ID_DCORE1_TPC_0_1 = 61, + GAUDI2_QUEUE_ID_DCORE1_TPC_0_2 = 62, + GAUDI2_QUEUE_ID_DCORE1_TPC_0_3 = 63, + GAUDI2_QUEUE_ID_DCORE1_TPC_1_0 = 64, + GAUDI2_QUEUE_ID_DCORE1_TPC_1_1 = 65, + GAUDI2_QUEUE_ID_DCORE1_TPC_1_2 = 66, + GAUDI2_QUEUE_ID_DCORE1_TPC_1_3 = 67, + GAUDI2_QUEUE_ID_DCORE1_TPC_2_0 = 68, + GAUDI2_QUEUE_ID_DCORE1_TPC_2_1 = 69, + GAUDI2_QUEUE_ID_DCORE1_TPC_2_2 = 70, + GAUDI2_QUEUE_ID_DCORE1_TPC_2_3 = 71, + GAUDI2_QUEUE_ID_DCORE1_TPC_3_0 = 72, + GAUDI2_QUEUE_ID_DCORE1_TPC_3_1 = 73, + GAUDI2_QUEUE_ID_DCORE1_TPC_3_2 = 74, + GAUDI2_QUEUE_ID_DCORE1_TPC_3_3 = 75, + GAUDI2_QUEUE_ID_DCORE1_TPC_4_0 = 76, + GAUDI2_QUEUE_ID_DCORE1_TPC_4_1 = 77, + GAUDI2_QUEUE_ID_DCORE1_TPC_4_2 = 78, + GAUDI2_QUEUE_ID_DCORE1_TPC_4_3 = 79, + GAUDI2_QUEUE_ID_DCORE1_TPC_5_0 = 80, + GAUDI2_QUEUE_ID_DCORE1_TPC_5_1 = 81, + GAUDI2_QUEUE_ID_DCORE1_TPC_5_2 = 82, + GAUDI2_QUEUE_ID_DCORE1_TPC_5_3 = 83, + GAUDI2_QUEUE_ID_DCORE2_EDMA_0_0 = 84, + GAUDI2_QUEUE_ID_DCORE2_EDMA_0_1 = 85, + GAUDI2_QUEUE_ID_DCORE2_EDMA_0_2 = 86, + GAUDI2_QUEUE_ID_DCORE2_EDMA_0_3 = 87, + GAUDI2_QUEUE_ID_DCORE2_EDMA_1_0 = 88, + GAUDI2_QUEUE_ID_DCORE2_EDMA_1_1 = 89, + GAUDI2_QUEUE_ID_DCORE2_EDMA_1_2 = 90, + GAUDI2_QUEUE_ID_DCORE2_EDMA_1_3 = 91, + GAUDI2_QUEUE_ID_DCORE2_MME_0_0 = 92, + GAUDI2_QUEUE_ID_DCORE2_MME_0_1 = 93, + GAUDI2_QUEUE_ID_DCORE2_MME_0_2 = 94, + GAUDI2_QUEUE_ID_DCORE2_MME_0_3 = 95, + GAUDI2_QUEUE_ID_DCORE2_TPC_0_0 = 96, + GAUDI2_QUEUE_ID_DCORE2_TPC_0_1 = 97, + GAUDI2_QUEUE_ID_DCORE2_TPC_0_2 = 98, + GAUDI2_QUEUE_ID_DCORE2_TPC_0_3 = 99, + GAUDI2_QUEUE_ID_DCORE2_TPC_1_0 = 100, + GAUDI2_QUEUE_ID_DCORE2_TPC_1_1 = 101, + GAUDI2_QUEUE_ID_DCORE2_TPC_1_2 = 102, + GAUDI2_QUEUE_ID_DCORE2_TPC_1_3 = 103, + GAUDI2_QUEUE_ID_DCORE2_TPC_2_0 = 104, + GAUDI2_QUEUE_ID_DCORE2_TPC_2_1 = 105, + GAUDI2_QUEUE_ID_DCORE2_TPC_2_2 = 106, + GAUDI2_QUEUE_ID_DCORE2_TPC_2_3 = 107, + GAUDI2_QUEUE_ID_DCORE2_TPC_3_0 = 108, + GAUDI2_QUEUE_ID_DCORE2_TPC_3_1 = 109, + GAUDI2_QUEUE_ID_DCORE2_TPC_3_2 = 110, + GAUDI2_QUEUE_ID_DCORE2_TPC_3_3 = 111, + GAUDI2_QUEUE_ID_DCORE2_TPC_4_0 = 112, + GAUDI2_QUEUE_ID_DCORE2_TPC_4_1 = 113, + GAUDI2_QUEUE_ID_DCORE2_TPC_4_2 = 114, + GAUDI2_QUEUE_ID_DCORE2_TPC_4_3 = 115, + GAUDI2_QUEUE_ID_DCORE2_TPC_5_0 = 116, + GAUDI2_QUEUE_ID_DCORE2_TPC_5_1 = 117, + GAUDI2_QUEUE_ID_DCORE2_TPC_5_2 = 118, + GAUDI2_QUEUE_ID_DCORE2_TPC_5_3 = 119, + GAUDI2_QUEUE_ID_DCORE3_EDMA_0_0 = 120, + GAUDI2_QUEUE_ID_DCORE3_EDMA_0_1 = 121, + GAUDI2_QUEUE_ID_DCORE3_EDMA_0_2 = 122, + GAUDI2_QUEUE_ID_DCORE3_EDMA_0_3 = 123, + GAUDI2_QUEUE_ID_DCORE3_EDMA_1_0 = 124, + GAUDI2_QUEUE_ID_DCORE3_EDMA_1_1 = 125, + GAUDI2_QUEUE_ID_DCORE3_EDMA_1_2 = 126, + GAUDI2_QUEUE_ID_DCORE3_EDMA_1_3 = 127, + GAUDI2_QUEUE_ID_DCORE3_MME_0_0 = 128, + GAUDI2_QUEUE_ID_DCORE3_MME_0_1 = 129, + GAUDI2_QUEUE_ID_DCORE3_MME_0_2 = 130, + GAUDI2_QUEUE_ID_DCORE3_MME_0_3 = 131, + GAUDI2_QUEUE_ID_DCORE3_TPC_0_0 = 132, + GAUDI2_QUEUE_ID_DCORE3_TPC_0_1 = 133, + GAUDI2_QUEUE_ID_DCORE3_TPC_0_2 = 134, + GAUDI2_QUEUE_ID_DCORE3_TPC_0_3 = 135, + GAUDI2_QUEUE_ID_DCORE3_TPC_1_0 = 136, + GAUDI2_QUEUE_ID_DCORE3_TPC_1_1 = 137, + GAUDI2_QUEUE_ID_DCORE3_TPC_1_2 = 138, + GAUDI2_QUEUE_ID_DCORE3_TPC_1_3 = 139, + GAUDI2_QUEUE_ID_DCORE3_TPC_2_0 = 140, + GAUDI2_QUEUE_ID_DCORE3_TPC_2_1 = 141, + GAUDI2_QUEUE_ID_DCORE3_TPC_2_2 = 142, + GAUDI2_QUEUE_ID_DCORE3_TPC_2_3 = 143, + GAUDI2_QUEUE_ID_DCORE3_TPC_3_0 = 144, + GAUDI2_QUEUE_ID_DCORE3_TPC_3_1 = 145, + GAUDI2_QUEUE_ID_DCORE3_TPC_3_2 = 146, + GAUDI2_QUEUE_ID_DCORE3_TPC_3_3 = 147, + GAUDI2_QUEUE_ID_DCORE3_TPC_4_0 = 148, + GAUDI2_QUEUE_ID_DCORE3_TPC_4_1 = 149, + GAUDI2_QUEUE_ID_DCORE3_TPC_4_2 = 150, + GAUDI2_QUEUE_ID_DCORE3_TPC_4_3 = 151, + GAUDI2_QUEUE_ID_DCORE3_TPC_5_0 = 152, + GAUDI2_QUEUE_ID_DCORE3_TPC_5_1 = 153, + GAUDI2_QUEUE_ID_DCORE3_TPC_5_2 = 154, + GAUDI2_QUEUE_ID_DCORE3_TPC_5_3 = 155, + GAUDI2_QUEUE_ID_NIC_0_0 = 156, + GAUDI2_QUEUE_ID_NIC_0_1 = 157, + GAUDI2_QUEUE_ID_NIC_0_2 = 158, + GAUDI2_QUEUE_ID_NIC_0_3 = 159, + GAUDI2_QUEUE_ID_NIC_1_0 = 160, + GAUDI2_QUEUE_ID_NIC_1_1 = 161, + GAUDI2_QUEUE_ID_NIC_1_2 = 162, + GAUDI2_QUEUE_ID_NIC_1_3 = 163, + GAUDI2_QUEUE_ID_NIC_2_0 = 164, + GAUDI2_QUEUE_ID_NIC_2_1 = 165, + GAUDI2_QUEUE_ID_NIC_2_2 = 166, + GAUDI2_QUEUE_ID_NIC_2_3 = 167, + GAUDI2_QUEUE_ID_NIC_3_0 = 168, + GAUDI2_QUEUE_ID_NIC_3_1 = 169, + GAUDI2_QUEUE_ID_NIC_3_2 = 170, + GAUDI2_QUEUE_ID_NIC_3_3 = 171, + GAUDI2_QUEUE_ID_NIC_4_0 = 172, + GAUDI2_QUEUE_ID_NIC_4_1 = 173, + GAUDI2_QUEUE_ID_NIC_4_2 = 174, + GAUDI2_QUEUE_ID_NIC_4_3 = 175, + GAUDI2_QUEUE_ID_NIC_5_0 = 176, + GAUDI2_QUEUE_ID_NIC_5_1 = 177, + GAUDI2_QUEUE_ID_NIC_5_2 = 178, + GAUDI2_QUEUE_ID_NIC_5_3 = 179, + GAUDI2_QUEUE_ID_NIC_6_0 = 180, + GAUDI2_QUEUE_ID_NIC_6_1 = 181, + GAUDI2_QUEUE_ID_NIC_6_2 = 182, + GAUDI2_QUEUE_ID_NIC_6_3 = 183, + GAUDI2_QUEUE_ID_NIC_7_0 = 184, + GAUDI2_QUEUE_ID_NIC_7_1 = 185, + GAUDI2_QUEUE_ID_NIC_7_2 = 186, + GAUDI2_QUEUE_ID_NIC_7_3 = 187, + GAUDI2_QUEUE_ID_NIC_8_0 = 188, + GAUDI2_QUEUE_ID_NIC_8_1 = 189, + GAUDI2_QUEUE_ID_NIC_8_2 = 190, + GAUDI2_QUEUE_ID_NIC_8_3 = 191, + GAUDI2_QUEUE_ID_NIC_9_0 = 192, + GAUDI2_QUEUE_ID_NIC_9_1 = 193, + GAUDI2_QUEUE_ID_NIC_9_2 = 194, + GAUDI2_QUEUE_ID_NIC_9_3 = 195, + GAUDI2_QUEUE_ID_NIC_10_0 = 196, + GAUDI2_QUEUE_ID_NIC_10_1 = 197, + GAUDI2_QUEUE_ID_NIC_10_2 = 198, + GAUDI2_QUEUE_ID_NIC_10_3 = 199, + GAUDI2_QUEUE_ID_NIC_11_0 = 200, + GAUDI2_QUEUE_ID_NIC_11_1 = 201, + GAUDI2_QUEUE_ID_NIC_11_2 = 202, + GAUDI2_QUEUE_ID_NIC_11_3 = 203, + GAUDI2_QUEUE_ID_NIC_12_0 = 204, + GAUDI2_QUEUE_ID_NIC_12_1 = 205, + GAUDI2_QUEUE_ID_NIC_12_2 = 206, + GAUDI2_QUEUE_ID_NIC_12_3 = 207, + GAUDI2_QUEUE_ID_NIC_13_0 = 208, + GAUDI2_QUEUE_ID_NIC_13_1 = 209, + GAUDI2_QUEUE_ID_NIC_13_2 = 210, + GAUDI2_QUEUE_ID_NIC_13_3 = 211, + GAUDI2_QUEUE_ID_NIC_14_0 = 212, + GAUDI2_QUEUE_ID_NIC_14_1 = 213, + GAUDI2_QUEUE_ID_NIC_14_2 = 214, + GAUDI2_QUEUE_ID_NIC_14_3 = 215, + GAUDI2_QUEUE_ID_NIC_15_0 = 216, + GAUDI2_QUEUE_ID_NIC_15_1 = 217, + GAUDI2_QUEUE_ID_NIC_15_2 = 218, + GAUDI2_QUEUE_ID_NIC_15_3 = 219, + GAUDI2_QUEUE_ID_NIC_16_0 = 220, + GAUDI2_QUEUE_ID_NIC_16_1 = 221, + GAUDI2_QUEUE_ID_NIC_16_2 = 222, + GAUDI2_QUEUE_ID_NIC_16_3 = 223, + GAUDI2_QUEUE_ID_NIC_17_0 = 224, + GAUDI2_QUEUE_ID_NIC_17_1 = 225, + GAUDI2_QUEUE_ID_NIC_17_2 = 226, + GAUDI2_QUEUE_ID_NIC_17_3 = 227, + GAUDI2_QUEUE_ID_NIC_18_0 = 228, + GAUDI2_QUEUE_ID_NIC_18_1 = 229, + GAUDI2_QUEUE_ID_NIC_18_2 = 230, + GAUDI2_QUEUE_ID_NIC_18_3 = 231, + GAUDI2_QUEUE_ID_NIC_19_0 = 232, + GAUDI2_QUEUE_ID_NIC_19_1 = 233, + GAUDI2_QUEUE_ID_NIC_19_2 = 234, + GAUDI2_QUEUE_ID_NIC_19_3 = 235, + GAUDI2_QUEUE_ID_NIC_20_0 = 236, + GAUDI2_QUEUE_ID_NIC_20_1 = 237, + GAUDI2_QUEUE_ID_NIC_20_2 = 238, + GAUDI2_QUEUE_ID_NIC_20_3 = 239, + GAUDI2_QUEUE_ID_NIC_21_0 = 240, + GAUDI2_QUEUE_ID_NIC_21_1 = 241, + GAUDI2_QUEUE_ID_NIC_21_2 = 242, + GAUDI2_QUEUE_ID_NIC_21_3 = 243, + GAUDI2_QUEUE_ID_NIC_22_0 = 244, + GAUDI2_QUEUE_ID_NIC_22_1 = 245, + GAUDI2_QUEUE_ID_NIC_22_2 = 246, + GAUDI2_QUEUE_ID_NIC_22_3 = 247, + GAUDI2_QUEUE_ID_NIC_23_0 = 248, + GAUDI2_QUEUE_ID_NIC_23_1 = 249, + GAUDI2_QUEUE_ID_NIC_23_2 = 250, + GAUDI2_QUEUE_ID_NIC_23_3 = 251, + GAUDI2_QUEUE_ID_ROT_0_0 = 252, + GAUDI2_QUEUE_ID_ROT_0_1 = 253, + GAUDI2_QUEUE_ID_ROT_0_2 = 254, + GAUDI2_QUEUE_ID_ROT_0_3 = 255, + GAUDI2_QUEUE_ID_ROT_1_0 = 256, + GAUDI2_QUEUE_ID_ROT_1_1 = 257, + GAUDI2_QUEUE_ID_ROT_1_2 = 258, + GAUDI2_QUEUE_ID_ROT_1_3 = 259, + GAUDI2_QUEUE_ID_CPU_PQ = 260, + GAUDI2_QUEUE_ID_SIZE +}; + +/* + * Engine Numbering + * + * Used in the "busy_engines_mask" field in `struct hl_info_hw_idle' + */ + +enum goya_engine_id { + GOYA_ENGINE_ID_DMA_0 = 0, + GOYA_ENGINE_ID_DMA_1, + GOYA_ENGINE_ID_DMA_2, + GOYA_ENGINE_ID_DMA_3, + GOYA_ENGINE_ID_DMA_4, + GOYA_ENGINE_ID_MME_0, + GOYA_ENGINE_ID_TPC_0, + GOYA_ENGINE_ID_TPC_1, + GOYA_ENGINE_ID_TPC_2, + GOYA_ENGINE_ID_TPC_3, + GOYA_ENGINE_ID_TPC_4, + GOYA_ENGINE_ID_TPC_5, + GOYA_ENGINE_ID_TPC_6, + GOYA_ENGINE_ID_TPC_7, + GOYA_ENGINE_ID_SIZE +}; + +enum gaudi_engine_id { + GAUDI_ENGINE_ID_DMA_0 = 0, + GAUDI_ENGINE_ID_DMA_1, + GAUDI_ENGINE_ID_DMA_2, + GAUDI_ENGINE_ID_DMA_3, + GAUDI_ENGINE_ID_DMA_4, + GAUDI_ENGINE_ID_DMA_5, + GAUDI_ENGINE_ID_DMA_6, + GAUDI_ENGINE_ID_DMA_7, + GAUDI_ENGINE_ID_MME_0, + GAUDI_ENGINE_ID_MME_1, + GAUDI_ENGINE_ID_MME_2, + GAUDI_ENGINE_ID_MME_3, + GAUDI_ENGINE_ID_TPC_0, + GAUDI_ENGINE_ID_TPC_1, + GAUDI_ENGINE_ID_TPC_2, + GAUDI_ENGINE_ID_TPC_3, + GAUDI_ENGINE_ID_TPC_4, + GAUDI_ENGINE_ID_TPC_5, + GAUDI_ENGINE_ID_TPC_6, + GAUDI_ENGINE_ID_TPC_7, + GAUDI_ENGINE_ID_NIC_0, + GAUDI_ENGINE_ID_NIC_1, + GAUDI_ENGINE_ID_NIC_2, + GAUDI_ENGINE_ID_NIC_3, + GAUDI_ENGINE_ID_NIC_4, + GAUDI_ENGINE_ID_NIC_5, + GAUDI_ENGINE_ID_NIC_6, + GAUDI_ENGINE_ID_NIC_7, + GAUDI_ENGINE_ID_NIC_8, + GAUDI_ENGINE_ID_NIC_9, + GAUDI_ENGINE_ID_SIZE +}; + +enum gaudi2_engine_id { + GAUDI2_DCORE0_ENGINE_ID_EDMA_0 = 0, + GAUDI2_DCORE0_ENGINE_ID_EDMA_1, + GAUDI2_DCORE0_ENGINE_ID_MME, + GAUDI2_DCORE0_ENGINE_ID_TPC_0, + GAUDI2_DCORE0_ENGINE_ID_TPC_1, + GAUDI2_DCORE0_ENGINE_ID_TPC_2, + GAUDI2_DCORE0_ENGINE_ID_TPC_3, + GAUDI2_DCORE0_ENGINE_ID_TPC_4, + GAUDI2_DCORE0_ENGINE_ID_TPC_5, + GAUDI2_DCORE0_ENGINE_ID_DEC_0, + GAUDI2_DCORE0_ENGINE_ID_DEC_1, + GAUDI2_DCORE1_ENGINE_ID_EDMA_0, + GAUDI2_DCORE1_ENGINE_ID_EDMA_1, + GAUDI2_DCORE1_ENGINE_ID_MME, + GAUDI2_DCORE1_ENGINE_ID_TPC_0, + GAUDI2_DCORE1_ENGINE_ID_TPC_1, + GAUDI2_DCORE1_ENGINE_ID_TPC_2, + GAUDI2_DCORE1_ENGINE_ID_TPC_3, + GAUDI2_DCORE1_ENGINE_ID_TPC_4, + GAUDI2_DCORE1_ENGINE_ID_TPC_5, + GAUDI2_DCORE1_ENGINE_ID_DEC_0, + GAUDI2_DCORE1_ENGINE_ID_DEC_1, + GAUDI2_DCORE2_ENGINE_ID_EDMA_0, + GAUDI2_DCORE2_ENGINE_ID_EDMA_1, + GAUDI2_DCORE2_ENGINE_ID_MME, + GAUDI2_DCORE2_ENGINE_ID_TPC_0, + GAUDI2_DCORE2_ENGINE_ID_TPC_1, + GAUDI2_DCORE2_ENGINE_ID_TPC_2, + GAUDI2_DCORE2_ENGINE_ID_TPC_3, + GAUDI2_DCORE2_ENGINE_ID_TPC_4, + GAUDI2_DCORE2_ENGINE_ID_TPC_5, + GAUDI2_DCORE2_ENGINE_ID_DEC_0, + GAUDI2_DCORE2_ENGINE_ID_DEC_1, + GAUDI2_DCORE3_ENGINE_ID_EDMA_0, + GAUDI2_DCORE3_ENGINE_ID_EDMA_1, + GAUDI2_DCORE3_ENGINE_ID_MME, + GAUDI2_DCORE3_ENGINE_ID_TPC_0, + GAUDI2_DCORE3_ENGINE_ID_TPC_1, + GAUDI2_DCORE3_ENGINE_ID_TPC_2, + GAUDI2_DCORE3_ENGINE_ID_TPC_3, + GAUDI2_DCORE3_ENGINE_ID_TPC_4, + GAUDI2_DCORE3_ENGINE_ID_TPC_5, + GAUDI2_DCORE3_ENGINE_ID_DEC_0, + GAUDI2_DCORE3_ENGINE_ID_DEC_1, + GAUDI2_DCORE0_ENGINE_ID_TPC_6, + GAUDI2_ENGINE_ID_PDMA_0, + GAUDI2_ENGINE_ID_PDMA_1, + GAUDI2_ENGINE_ID_ROT_0, + GAUDI2_ENGINE_ID_ROT_1, + GAUDI2_PCIE_ENGINE_ID_DEC_0, + GAUDI2_PCIE_ENGINE_ID_DEC_1, + GAUDI2_ENGINE_ID_NIC0_0, + GAUDI2_ENGINE_ID_NIC0_1, + GAUDI2_ENGINE_ID_NIC1_0, + GAUDI2_ENGINE_ID_NIC1_1, + GAUDI2_ENGINE_ID_NIC2_0, + GAUDI2_ENGINE_ID_NIC2_1, + GAUDI2_ENGINE_ID_NIC3_0, + GAUDI2_ENGINE_ID_NIC3_1, + GAUDI2_ENGINE_ID_NIC4_0, + GAUDI2_ENGINE_ID_NIC4_1, + GAUDI2_ENGINE_ID_NIC5_0, + GAUDI2_ENGINE_ID_NIC5_1, + GAUDI2_ENGINE_ID_NIC6_0, + GAUDI2_ENGINE_ID_NIC6_1, + GAUDI2_ENGINE_ID_NIC7_0, + GAUDI2_ENGINE_ID_NIC7_1, + GAUDI2_ENGINE_ID_NIC8_0, + GAUDI2_ENGINE_ID_NIC8_1, + GAUDI2_ENGINE_ID_NIC9_0, + GAUDI2_ENGINE_ID_NIC9_1, + GAUDI2_ENGINE_ID_NIC10_0, + GAUDI2_ENGINE_ID_NIC10_1, + GAUDI2_ENGINE_ID_NIC11_0, + GAUDI2_ENGINE_ID_NIC11_1, + GAUDI2_ENGINE_ID_PCIE, + GAUDI2_ENGINE_ID_PSOC, + GAUDI2_ENGINE_ID_ARC_FARM, + GAUDI2_ENGINE_ID_KDMA, + GAUDI2_ENGINE_ID_SIZE +}; + +/* + * ASIC specific PLL index + * + * Used to retrieve in frequency info of different IPs via + * HL_INFO_PLL_FREQUENCY under HL_IOCTL_INFO IOCTL. The enums need to be + * used as an index in struct hl_pll_frequency_info + */ + +enum hl_goya_pll_index { + HL_GOYA_CPU_PLL = 0, + HL_GOYA_IC_PLL, + HL_GOYA_MC_PLL, + HL_GOYA_MME_PLL, + HL_GOYA_PCI_PLL, + HL_GOYA_EMMC_PLL, + HL_GOYA_TPC_PLL, + HL_GOYA_PLL_MAX +}; + +enum hl_gaudi_pll_index { + HL_GAUDI_CPU_PLL = 0, + HL_GAUDI_PCI_PLL, + HL_GAUDI_SRAM_PLL, + HL_GAUDI_HBM_PLL, + HL_GAUDI_NIC_PLL, + HL_GAUDI_DMA_PLL, + HL_GAUDI_MESH_PLL, + HL_GAUDI_MME_PLL, + HL_GAUDI_TPC_PLL, + HL_GAUDI_IF_PLL, + HL_GAUDI_PLL_MAX +}; + +enum hl_gaudi2_pll_index { + HL_GAUDI2_CPU_PLL = 0, + HL_GAUDI2_PCI_PLL, + HL_GAUDI2_SRAM_PLL, + HL_GAUDI2_HBM_PLL, + HL_GAUDI2_NIC_PLL, + HL_GAUDI2_DMA_PLL, + HL_GAUDI2_MESH_PLL, + HL_GAUDI2_MME_PLL, + HL_GAUDI2_TPC_PLL, + HL_GAUDI2_IF_PLL, + HL_GAUDI2_VID_PLL, + HL_GAUDI2_MSS_PLL, + HL_GAUDI2_PLL_MAX +}; + +/** + * enum hl_goya_dma_direction - Direction of DMA operation inside a LIN_DMA packet that is + * submitted to the GOYA's DMA QMAN. This attribute is not relevant + * to the H/W but the kernel driver use it to parse the packet's + * addresses and patch/validate them. + * @HL_DMA_HOST_TO_DRAM: DMA operation from Host memory to GOYA's DDR. + * @HL_DMA_HOST_TO_SRAM: DMA operation from Host memory to GOYA's SRAM. + * @HL_DMA_DRAM_TO_SRAM: DMA operation from GOYA's DDR to GOYA's SRAM. + * @HL_DMA_SRAM_TO_DRAM: DMA operation from GOYA's SRAM to GOYA's DDR. + * @HL_DMA_SRAM_TO_HOST: DMA operation from GOYA's SRAM to Host memory. + * @HL_DMA_DRAM_TO_HOST: DMA operation from GOYA's DDR to Host memory. + * @HL_DMA_DRAM_TO_DRAM: DMA operation from GOYA's DDR to GOYA's DDR. + * @HL_DMA_SRAM_TO_SRAM: DMA operation from GOYA's SRAM to GOYA's SRAM. + * @HL_DMA_ENUM_MAX: number of values in enum + */ +enum hl_goya_dma_direction { + HL_DMA_HOST_TO_DRAM, + HL_DMA_HOST_TO_SRAM, + HL_DMA_DRAM_TO_SRAM, + HL_DMA_SRAM_TO_DRAM, + HL_DMA_SRAM_TO_HOST, + HL_DMA_DRAM_TO_HOST, + HL_DMA_DRAM_TO_DRAM, + HL_DMA_SRAM_TO_SRAM, + HL_DMA_ENUM_MAX +}; + +/** + * enum hl_device_status - Device status information. + * @HL_DEVICE_STATUS_OPERATIONAL: Device is operational. + * @HL_DEVICE_STATUS_IN_RESET: Device is currently during reset. + * @HL_DEVICE_STATUS_MALFUNCTION: Device is unusable. + * @HL_DEVICE_STATUS_NEEDS_RESET: Device needs reset because auto reset was disabled. + * @HL_DEVICE_STATUS_IN_DEVICE_CREATION: Device is operational but its creation is still in + * progress. + * @HL_DEVICE_STATUS_IN_RESET_AFTER_DEVICE_RELEASE: Device is currently during reset that was + * triggered because the user released the device + * @HL_DEVICE_STATUS_LAST: Last status. + */ +enum hl_device_status { + HL_DEVICE_STATUS_OPERATIONAL, + HL_DEVICE_STATUS_IN_RESET, + HL_DEVICE_STATUS_MALFUNCTION, + HL_DEVICE_STATUS_NEEDS_RESET, + HL_DEVICE_STATUS_IN_DEVICE_CREATION, + HL_DEVICE_STATUS_IN_RESET_AFTER_DEVICE_RELEASE, + HL_DEVICE_STATUS_LAST = HL_DEVICE_STATUS_IN_RESET_AFTER_DEVICE_RELEASE +}; + +enum hl_server_type { + HL_SERVER_TYPE_UNKNOWN = 0, + HL_SERVER_GAUDI_HLS1 = 1, + HL_SERVER_GAUDI_HLS1H = 2, + HL_SERVER_GAUDI_TYPE1 = 3, + HL_SERVER_GAUDI_TYPE2 = 4, + HL_SERVER_GAUDI2_HLS2 = 5, + HL_SERVER_GAUDI2_TYPE1 = 7 +}; + +/* + * Notifier event values - for the notification mechanism and the HL_INFO_GET_EVENTS command + * + * HL_NOTIFIER_EVENT_TPC_ASSERT - Indicates TPC assert event + * HL_NOTIFIER_EVENT_UNDEFINED_OPCODE - Indicates undefined operation code + * HL_NOTIFIER_EVENT_DEVICE_RESET - Indicates device requires a reset + * HL_NOTIFIER_EVENT_CS_TIMEOUT - Indicates CS timeout error + * HL_NOTIFIER_EVENT_DEVICE_UNAVAILABLE - Indicates device is unavailable + * HL_NOTIFIER_EVENT_USER_ENGINE_ERR - Indicates device engine in error state + * HL_NOTIFIER_EVENT_GENERAL_HW_ERR - Indicates device HW error + * HL_NOTIFIER_EVENT_RAZWI - Indicates razwi happened + * HL_NOTIFIER_EVENT_PAGE_FAULT - Indicates page fault happened + * HL_NOTIFIER_EVENT_CRITICAL_HW_ERR - Indicates a HW error that requires SW abort and + * HW reset + * HL_NOTIFIER_EVENT_CRITICAL_FW_ERR - Indicates a FW error that requires SW abort and + * HW reset + */ +#define HL_NOTIFIER_EVENT_TPC_ASSERT (1ULL << 0) +#define HL_NOTIFIER_EVENT_UNDEFINED_OPCODE (1ULL << 1) +#define HL_NOTIFIER_EVENT_DEVICE_RESET (1ULL << 2) +#define HL_NOTIFIER_EVENT_CS_TIMEOUT (1ULL << 3) +#define HL_NOTIFIER_EVENT_DEVICE_UNAVAILABLE (1ULL << 4) +#define HL_NOTIFIER_EVENT_USER_ENGINE_ERR (1ULL << 5) +#define HL_NOTIFIER_EVENT_GENERAL_HW_ERR (1ULL << 6) +#define HL_NOTIFIER_EVENT_RAZWI (1ULL << 7) +#define HL_NOTIFIER_EVENT_PAGE_FAULT (1ULL << 8) +#define HL_NOTIFIER_EVENT_CRITICL_HW_ERR (1ULL << 9) +#define HL_NOTIFIER_EVENT_CRITICL_FW_ERR (1ULL << 10) + +/* Opcode for management ioctl + * + * HW_IP_INFO - Receive information about different IP blocks in the + * device. + * HL_INFO_HW_EVENTS - Receive an array describing how many times each event + * occurred since the last hard reset. + * HL_INFO_DRAM_USAGE - Retrieve the dram usage inside the device and of the + * specific context. This is relevant only for devices + * where the dram is managed by the kernel driver + * HL_INFO_HW_IDLE - Retrieve information about the idle status of each + * internal engine. + * HL_INFO_DEVICE_STATUS - Retrieve the device's status. This opcode doesn't + * require an open context. + * HL_INFO_DEVICE_UTILIZATION - Retrieve the total utilization of the device + * over the last period specified by the user. + * The period can be between 100ms to 1s, in + * resolution of 100ms. The return value is a + * percentage of the utilization rate. + * HL_INFO_HW_EVENTS_AGGREGATE - Receive an array describing how many times each + * event occurred since the driver was loaded. + * HL_INFO_CLK_RATE - Retrieve the current and maximum clock rate + * of the device in MHz. The maximum clock rate is + * configurable via sysfs parameter + * HL_INFO_RESET_COUNT - Retrieve the counts of the soft and hard reset + * operations performed on the device since the last + * time the driver was loaded. + * HL_INFO_TIME_SYNC - Retrieve the device's time alongside the host's time + * for synchronization. + * HL_INFO_CS_COUNTERS - Retrieve command submission counters + * HL_INFO_PCI_COUNTERS - Retrieve PCI counters + * HL_INFO_CLK_THROTTLE_REASON - Retrieve clock throttling reason + * HL_INFO_SYNC_MANAGER - Retrieve sync manager info per dcore + * HL_INFO_TOTAL_ENERGY - Retrieve total energy consumption + * HL_INFO_PLL_FREQUENCY - Retrieve PLL frequency + * HL_INFO_POWER - Retrieve power information + * HL_INFO_OPEN_STATS - Retrieve info regarding recent device open calls + * HL_INFO_DRAM_REPLACED_ROWS - Retrieve DRAM replaced rows info + * HL_INFO_DRAM_PENDING_ROWS - Retrieve DRAM pending rows num + * HL_INFO_LAST_ERR_OPEN_DEV_TIME - Retrieve timestamp of the last time the device was opened + * and CS timeout or razwi error occurred. + * HL_INFO_CS_TIMEOUT_EVENT - Retrieve CS timeout timestamp and its related CS sequence number. + * HL_INFO_RAZWI_EVENT - Retrieve parameters of razwi: + * Timestamp of razwi. + * The address which accessing it caused the razwi. + * Razwi initiator. + * Razwi cause, was it a page fault or MMU access error. + * May return 0 even though no new data is available, in that case + * timestamp will be 0. + * HL_INFO_DEV_MEM_ALLOC_PAGE_SIZES - Retrieve valid page sizes for device memory allocation + * HL_INFO_SECURED_ATTESTATION - Retrieve attestation report of the boot. + * HL_INFO_REGISTER_EVENTFD - Register eventfd for event notifications. + * HL_INFO_UNREGISTER_EVENTFD - Unregister eventfd + * HL_INFO_GET_EVENTS - Retrieve the last occurred events + * HL_INFO_UNDEFINED_OPCODE_EVENT - Retrieve last undefined opcode error information. + * May return 0 even though no new data is available, in that case + * timestamp will be 0. + * HL_INFO_ENGINE_STATUS - Retrieve the status of all the h/w engines in the asic. + * HL_INFO_PAGE_FAULT_EVENT - Retrieve parameters of captured page fault. + * May return 0 even though no new data is available, in that case + * timestamp will be 0. + * HL_INFO_USER_MAPPINGS - Retrieve user mappings, captured after page fault event. + * HL_INFO_FW_GENERIC_REQ - Send generic request to FW. + * HL_INFO_HW_ERR_EVENT - Retrieve information on the reported HW error. + * May return 0 even though no new data is available, in that case + * timestamp will be 0. + * HL_INFO_FW_ERR_EVENT - Retrieve information on the reported FW error. + * May return 0 even though no new data is available, in that case + * timestamp will be 0. + */ +#define HL_INFO_HW_IP_INFO 0 +#define HL_INFO_HW_EVENTS 1 +#define HL_INFO_DRAM_USAGE 2 +#define HL_INFO_HW_IDLE 3 +#define HL_INFO_DEVICE_STATUS 4 +#define HL_INFO_DEVICE_UTILIZATION 6 +#define HL_INFO_HW_EVENTS_AGGREGATE 7 +#define HL_INFO_CLK_RATE 8 +#define HL_INFO_RESET_COUNT 9 +#define HL_INFO_TIME_SYNC 10 +#define HL_INFO_CS_COUNTERS 11 +#define HL_INFO_PCI_COUNTERS 12 +#define HL_INFO_CLK_THROTTLE_REASON 13 +#define HL_INFO_SYNC_MANAGER 14 +#define HL_INFO_TOTAL_ENERGY 15 +#define HL_INFO_PLL_FREQUENCY 16 +#define HL_INFO_POWER 17 +#define HL_INFO_OPEN_STATS 18 +#define HL_INFO_DRAM_REPLACED_ROWS 21 +#define HL_INFO_DRAM_PENDING_ROWS 22 +#define HL_INFO_LAST_ERR_OPEN_DEV_TIME 23 +#define HL_INFO_CS_TIMEOUT_EVENT 24 +#define HL_INFO_RAZWI_EVENT 25 +#define HL_INFO_DEV_MEM_ALLOC_PAGE_SIZES 26 +#define HL_INFO_SECURED_ATTESTATION 27 +#define HL_INFO_REGISTER_EVENTFD 28 +#define HL_INFO_UNREGISTER_EVENTFD 29 +#define HL_INFO_GET_EVENTS 30 +#define HL_INFO_UNDEFINED_OPCODE_EVENT 31 +#define HL_INFO_ENGINE_STATUS 32 +#define HL_INFO_PAGE_FAULT_EVENT 33 +#define HL_INFO_USER_MAPPINGS 34 +#define HL_INFO_FW_GENERIC_REQ 35 +#define HL_INFO_HW_ERR_EVENT 36 +#define HL_INFO_FW_ERR_EVENT 37 + +#define HL_INFO_VERSION_MAX_LEN 128 +#define HL_INFO_CARD_NAME_MAX_LEN 16 + +/* Maximum buffer size for retrieving engines status */ +#define HL_ENGINES_DATA_MAX_SIZE SZ_1M + +/** + * struct hl_info_hw_ip_info - hardware information on various IPs in the ASIC + * @sram_base_address: The first SRAM physical base address that is free to be + * used by the user. + * @dram_base_address: The first DRAM virtual or physical base address that is + * free to be used by the user. + * @dram_size: The DRAM size that is available to the user. + * @sram_size: The SRAM size that is available to the user. + * @num_of_events: The number of events that can be received from the f/w. This + * is needed so the user can what is the size of the h/w events + * array he needs to pass to the kernel when he wants to fetch + * the event counters. + * @device_id: PCI device ID of the ASIC. + * @module_id: Module ID of the ASIC for mezzanine cards in servers + * (From OCP spec). + * @decoder_enabled_mask: Bit-mask that represents which decoders are enabled. + * @first_available_interrupt_id: The first available interrupt ID for the user + * to be used when it works with user interrupts. + * Relevant for Gaudi2 and later. + * @server_type: Server type that the Gaudi ASIC is currently installed in. + * The value is according to enum hl_server_type + * @cpld_version: CPLD version on the board. + * @psoc_pci_pll_nr: PCI PLL NR value. Needed by the profiler in some ASICs. + * @psoc_pci_pll_nf: PCI PLL NF value. Needed by the profiler in some ASICs. + * @psoc_pci_pll_od: PCI PLL OD value. Needed by the profiler in some ASICs. + * @psoc_pci_pll_div_factor: PCI PLL DIV factor value. Needed by the profiler + * in some ASICs. + * @tpc_enabled_mask: Bit-mask that represents which TPCs are enabled. Relevant + * for Goya/Gaudi only. + * @dram_enabled: Whether the DRAM is enabled. + * @security_enabled: Whether security is enabled on device. + * @mme_master_slave_mode: Indicate whether the MME is working in master/slave + * configuration. Relevant for Greco and later. + * @cpucp_version: The CPUCP f/w version. + * @card_name: The card name as passed by the f/w. + * @tpc_enabled_mask_ext: Bit-mask that represents which TPCs are enabled. + * Relevant for Greco and later. + * @dram_page_size: The DRAM physical page size. + * @edma_enabled_mask: Bit-mask that represents which EDMAs are enabled. + * Relevant for Gaudi2 and later. + * @number_of_user_interrupts: The number of interrupts that are available to the userspace + * application to use. Relevant for Gaudi2 and later. + * @device_mem_alloc_default_page_size: default page size used in device memory allocation. + * @revision_id: PCI revision ID of the ASIC. + * @tpc_interrupt_id: interrupt id for TPC to use in order to raise events towards the host. + * @rotator_enabled_mask: Bit-mask that represents which rotators are enabled. + * Relevant for Gaudi3 and later. + * @engine_core_interrupt_reg_addr: interrupt register address for engine core to use + * in order to raise events toward FW. + * @reserved_dram_size: DRAM size reserved for driver and firmware. + */ +struct hl_info_hw_ip_info { + __u64 sram_base_address; + __u64 dram_base_address; + __u64 dram_size; + __u32 sram_size; + __u32 num_of_events; + __u32 device_id; + __u32 module_id; + __u32 decoder_enabled_mask; + __u16 first_available_interrupt_id; + __u16 server_type; + __u32 cpld_version; + __u32 psoc_pci_pll_nr; + __u32 psoc_pci_pll_nf; + __u32 psoc_pci_pll_od; + __u32 psoc_pci_pll_div_factor; + __u8 tpc_enabled_mask; + __u8 dram_enabled; + __u8 security_enabled; + __u8 mme_master_slave_mode; + __u8 cpucp_version[HL_INFO_VERSION_MAX_LEN]; + __u8 card_name[HL_INFO_CARD_NAME_MAX_LEN]; + __u64 tpc_enabled_mask_ext; + __u64 dram_page_size; + __u32 edma_enabled_mask; + __u16 number_of_user_interrupts; + __u8 reserved1; + __u8 reserved2; + __u64 reserved3; + __u64 device_mem_alloc_default_page_size; + __u64 reserved4; + __u64 reserved5; + __u32 reserved6; + __u8 reserved7; + __u8 revision_id; + __u16 tpc_interrupt_id; + __u32 rotator_enabled_mask; + __u32 reserved9; + __u64 engine_core_interrupt_reg_addr; + __u64 reserved_dram_size; +}; + +struct hl_info_dram_usage { + __u64 dram_free_mem; + __u64 ctx_dram_mem; +}; + +#define HL_BUSY_ENGINES_MASK_EXT_SIZE 4 + +struct hl_info_hw_idle { + __u32 is_idle; + /* + * Bitmask of busy engines. + * Bits definition is according to `enum _engine_id'. + */ + __u32 busy_engines_mask; + + /* + * Extended Bitmask of busy engines. + * Bits definition is according to `enum _engine_id'. + */ + __u64 busy_engines_mask_ext[HL_BUSY_ENGINES_MASK_EXT_SIZE]; +}; + +struct hl_info_device_status { + __u32 status; + __u32 pad; +}; + +struct hl_info_device_utilization { + __u32 utilization; + __u32 pad; +}; + +struct hl_info_clk_rate { + __u32 cur_clk_rate_mhz; + __u32 max_clk_rate_mhz; +}; + +struct hl_info_reset_count { + __u32 hard_reset_cnt; + __u32 soft_reset_cnt; +}; + +struct hl_info_time_sync { + __u64 device_time; + __u64 host_time; +}; + +/** + * struct hl_info_pci_counters - pci counters + * @rx_throughput: PCI rx throughput KBps + * @tx_throughput: PCI tx throughput KBps + * @replay_cnt: PCI replay counter + */ +struct hl_info_pci_counters { + __u64 rx_throughput; + __u64 tx_throughput; + __u64 replay_cnt; +}; + +enum hl_clk_throttling_type { + HL_CLK_THROTTLE_TYPE_POWER, + HL_CLK_THROTTLE_TYPE_THERMAL, + HL_CLK_THROTTLE_TYPE_MAX +}; + +/* clk_throttling_reason masks */ +#define HL_CLK_THROTTLE_POWER (1 << HL_CLK_THROTTLE_TYPE_POWER) +#define HL_CLK_THROTTLE_THERMAL (1 << HL_CLK_THROTTLE_TYPE_THERMAL) + +/** + * struct hl_info_clk_throttle - clock throttling reason + * @clk_throttling_reason: each bit represents a clk throttling reason + * @clk_throttling_timestamp_us: represents CPU timestamp in microseconds of the start-event + * @clk_throttling_duration_ns: the clock throttle time in nanosec + */ +struct hl_info_clk_throttle { + __u32 clk_throttling_reason; + __u32 pad; + __u64 clk_throttling_timestamp_us[HL_CLK_THROTTLE_TYPE_MAX]; + __u64 clk_throttling_duration_ns[HL_CLK_THROTTLE_TYPE_MAX]; +}; + +/** + * struct hl_info_energy - device energy information + * @total_energy_consumption: total device energy consumption + */ +struct hl_info_energy { + __u64 total_energy_consumption; +}; + +#define HL_PLL_NUM_OUTPUTS 4 + +struct hl_pll_frequency_info { + __u16 output[HL_PLL_NUM_OUTPUTS]; +}; + +/** + * struct hl_open_stats_info - device open statistics information + * @open_counter: ever growing counter, increased on each successful dev open + * @last_open_period_ms: duration (ms) device was open last time + * @is_compute_ctx_active: Whether there is an active compute context executing + * @compute_ctx_in_release: true if the current compute context is being released + */ +struct hl_open_stats_info { + __u64 open_counter; + __u64 last_open_period_ms; + __u8 is_compute_ctx_active; + __u8 compute_ctx_in_release; + __u8 pad[6]; +}; + +/** + * struct hl_power_info - power information + * @power: power consumption + */ +struct hl_power_info { + __u64 power; +}; + +/** + * struct hl_info_sync_manager - sync manager information + * @first_available_sync_object: first available sob + * @first_available_monitor: first available monitor + * @first_available_cq: first available cq + */ +struct hl_info_sync_manager { + __u32 first_available_sync_object; + __u32 first_available_monitor; + __u32 first_available_cq; + __u32 reserved; +}; + +/** + * struct hl_info_cs_counters - command submission counters + * @total_out_of_mem_drop_cnt: total dropped due to memory allocation issue + * @ctx_out_of_mem_drop_cnt: context dropped due to memory allocation issue + * @total_parsing_drop_cnt: total dropped due to error in packet parsing + * @ctx_parsing_drop_cnt: context dropped due to error in packet parsing + * @total_queue_full_drop_cnt: total dropped due to queue full + * @ctx_queue_full_drop_cnt: context dropped due to queue full + * @total_device_in_reset_drop_cnt: total dropped due to device in reset + * @ctx_device_in_reset_drop_cnt: context dropped due to device in reset + * @total_max_cs_in_flight_drop_cnt: total dropped due to maximum CS in-flight + * @ctx_max_cs_in_flight_drop_cnt: context dropped due to maximum CS in-flight + * @total_validation_drop_cnt: total dropped due to validation error + * @ctx_validation_drop_cnt: context dropped due to validation error + */ +struct hl_info_cs_counters { + __u64 total_out_of_mem_drop_cnt; + __u64 ctx_out_of_mem_drop_cnt; + __u64 total_parsing_drop_cnt; + __u64 ctx_parsing_drop_cnt; + __u64 total_queue_full_drop_cnt; + __u64 ctx_queue_full_drop_cnt; + __u64 total_device_in_reset_drop_cnt; + __u64 ctx_device_in_reset_drop_cnt; + __u64 total_max_cs_in_flight_drop_cnt; + __u64 ctx_max_cs_in_flight_drop_cnt; + __u64 total_validation_drop_cnt; + __u64 ctx_validation_drop_cnt; +}; + +/** + * struct hl_info_last_err_open_dev_time - last error boot information. + * @timestamp: timestamp of last time the device was opened and error occurred. + */ +struct hl_info_last_err_open_dev_time { + __s64 timestamp; +}; + +/** + * struct hl_info_cs_timeout_event - last CS timeout information. + * @timestamp: timestamp when last CS timeout event occurred. + * @seq: sequence number of last CS timeout event. + */ +struct hl_info_cs_timeout_event { + __s64 timestamp; + __u64 seq; +}; + +#define HL_RAZWI_NA_ENG_ID U16_MAX +#define HL_RAZWI_MAX_NUM_OF_ENGINES_PER_RTR 128 +#define HL_RAZWI_READ BIT(0) +#define HL_RAZWI_WRITE BIT(1) +#define HL_RAZWI_LBW BIT(2) +#define HL_RAZWI_HBW BIT(3) +#define HL_RAZWI_RR BIT(4) +#define HL_RAZWI_ADDR_DEC BIT(5) + +/** + * struct hl_info_razwi_event - razwi information. + * @timestamp: timestamp of razwi. + * @addr: address which accessing it caused razwi. + * @engine_id: engine id of the razwi initiator, if it was initiated by engine that does not + * have engine id it will be set to HL_RAZWI_NA_ENG_ID. If there are several possible + * engines which caused the razwi, it will hold all of them. + * @num_of_possible_engines: contains number of possible engine ids. In some asics, razwi indication + * might be common for several engines and there is no way to get the + * exact engine. In this way, engine_id array will be filled with all + * possible engines caused this razwi. Also, there might be possibility + * in gaudi, where we don't indication on specific engine, in that case + * the value of this parameter will be zero. + * @flags: bitmask for additional data: HL_RAZWI_READ - razwi caused by read operation + * HL_RAZWI_WRITE - razwi caused by write operation + * HL_RAZWI_LBW - razwi caused by lbw fabric transaction + * HL_RAZWI_HBW - razwi caused by hbw fabric transaction + * HL_RAZWI_RR - razwi caused by range register + * HL_RAZWI_ADDR_DEC - razwi caused by address decode error + * Note: this data is not supported by all asics, in that case the relevant bits will not + * be set. + */ +struct hl_info_razwi_event { + __s64 timestamp; + __u64 addr; + __u16 engine_id[HL_RAZWI_MAX_NUM_OF_ENGINES_PER_RTR]; + __u16 num_of_possible_engines; + __u8 flags; + __u8 pad[5]; +}; + +#define MAX_QMAN_STREAMS_INFO 4 +#define OPCODE_INFO_MAX_ADDR_SIZE 8 +/** + * struct hl_info_undefined_opcode_event - info about last undefined opcode error + * @timestamp: timestamp of the undefined opcode error + * @cb_addr_streams: CB addresses (per stream) that are currently exists in the PQ + * entries. In case all streams array entries are + * filled with values, it means the execution was in Lower-CP. + * @cq_addr: the address of the current handled command buffer + * @cq_size: the size of the current handled command buffer + * @cb_addr_streams_len: num of streams - actual len of cb_addr_streams array. + * should be equal to 1 in case of undefined opcode + * in Upper-CP (specific stream) and equal to 4 incase + * of undefined opcode in Lower-CP. + * @engine_id: engine-id that the error occurred on + * @stream_id: the stream id the error occurred on. In case the stream equals to + * MAX_QMAN_STREAMS_INFO it means the error occurred on a Lower-CP. + */ +struct hl_info_undefined_opcode_event { + __s64 timestamp; + __u64 cb_addr_streams[MAX_QMAN_STREAMS_INFO][OPCODE_INFO_MAX_ADDR_SIZE]; + __u64 cq_addr; + __u32 cq_size; + __u32 cb_addr_streams_len; + __u32 engine_id; + __u32 stream_id; +}; + +/** + * struct hl_info_hw_err_event - info about HW error + * @timestamp: timestamp of error occurrence + * @event_id: The async event ID (specific to each device type). + * @pad: size padding for u64 granularity. + */ +struct hl_info_hw_err_event { + __s64 timestamp; + __u16 event_id; + __u16 pad[3]; +}; + +/* FW error definition for event_type in struct hl_info_fw_err_event */ +enum hl_info_fw_err_type { + HL_INFO_FW_HEARTBEAT_ERR, + HL_INFO_FW_REPORTED_ERR, +}; + +/** + * struct hl_info_fw_err_event - info about FW error + * @timestamp: time-stamp of error occurrence + * @err_type: The type of event as defined in hl_info_fw_err_type. + * @event_id: The async event ID (specific to each device type, applicable only when event type is + * HL_INFO_FW_REPORTED_ERR). + * @pad: size padding for u64 granularity. + */ +struct hl_info_fw_err_event { + __s64 timestamp; + __u16 err_type; + __u16 event_id; + __u32 pad; +}; + +/** + * struct hl_info_dev_memalloc_page_sizes - valid page sizes in device mem alloc information. + * @page_order_bitmask: bitmap in which a set bit represents the order of the supported page size + * (e.g. 0x2100000 means that 1MB and 32MB pages are supported). + */ +struct hl_info_dev_memalloc_page_sizes { + __u64 page_order_bitmask; +}; + +#define SEC_PCR_DATA_BUF_SZ 256 +#define SEC_PCR_QUOTE_BUF_SZ 510 /* (512 - 2) 2 bytes used for size */ +#define SEC_SIGNATURE_BUF_SZ 255 /* (256 - 1) 1 byte used for size */ +#define SEC_PUB_DATA_BUF_SZ 510 /* (512 - 2) 2 bytes used for size */ +#define SEC_CERTIFICATE_BUF_SZ 2046 /* (2048 - 2) 2 bytes used for size */ + +/* + * struct hl_info_sec_attest - attestation report of the boot + * @nonce: number only used once. random number provided by host. this also passed to the quote + * command as a qualifying data. + * @pcr_quote_len: length of the attestation quote data (bytes) + * @pub_data_len: length of the public data (bytes) + * @certificate_len: length of the certificate (bytes) + * @pcr_num_reg: number of PCR registers in the pcr_data array + * @pcr_reg_len: length of each PCR register in the pcr_data array (bytes) + * @quote_sig_len: length of the attestation report signature (bytes) + * @pcr_data: raw values of the PCR registers + * @pcr_quote: attestation report data structure + * @quote_sig: signature structure of the attestation report + * @public_data: public key for the signed attestation + * (outPublic + name + qualifiedName) + * @certificate: certificate for the attestation signing key + */ +struct hl_info_sec_attest { + __u32 nonce; + __u16 pcr_quote_len; + __u16 pub_data_len; + __u16 certificate_len; + __u8 pcr_num_reg; + __u8 pcr_reg_len; + __u8 quote_sig_len; + __u8 pcr_data[SEC_PCR_DATA_BUF_SZ]; + __u8 pcr_quote[SEC_PCR_QUOTE_BUF_SZ]; + __u8 quote_sig[SEC_SIGNATURE_BUF_SZ]; + __u8 public_data[SEC_PUB_DATA_BUF_SZ]; + __u8 certificate[SEC_CERTIFICATE_BUF_SZ]; + __u8 pad0[2]; +}; + +/** + * struct hl_page_fault_info - page fault information. + * @timestamp: timestamp of page fault. + * @addr: address which accessing it caused page fault. + * @engine_id: engine id which caused the page fault, supported only in gaudi3. + */ +struct hl_page_fault_info { + __s64 timestamp; + __u64 addr; + __u16 engine_id; + __u8 pad[6]; +}; + +/** + * struct hl_user_mapping - user mapping information. + * @dev_va: device virtual address. + * @size: virtual address mapping size. + */ +struct hl_user_mapping { + __u64 dev_va; + __u64 size; +}; + +enum gaudi_dcores { + HL_GAUDI_WS_DCORE, + HL_GAUDI_WN_DCORE, + HL_GAUDI_EN_DCORE, + HL_GAUDI_ES_DCORE +}; + +/** + * struct hl_info_args - Main structure to retrieve device related information. + * @return_pointer: User space address of the relevant structure related to HL_INFO_* operation + * mentioned in @op. + * @return_size: Size of the structure used in @return_pointer, just like "size" in "snprintf", it + * limits how many bytes the kernel can write. For hw_events array, the size should be + * hl_info_hw_ip_info.num_of_events * sizeof(__u32). + * @op: Defines which type of information to be retrieved. Refer HL_INFO_* for details. + * @dcore_id: DCORE id for which the information is relevant (for Gaudi refer to enum gaudi_dcores). + * @ctx_id: Context ID of the user. Currently not in use. + * @period_ms: Period value, in milliseconds, for utilization rate in range 100ms - 1000ms in 100 ms + * resolution. Currently not in use. + * @pll_index: Index as defined in hl__pll_index enumeration. + * @eventfd: event file descriptor for event notifications. + * @user_buffer_actual_size: Actual data size which was copied to user allocated buffer by the + * driver. It is possible for the user to allocate buffer larger than + * needed, hence updating this variable so user will know the exact amount + * of bytes copied by the kernel to the buffer. + * @sec_attest_nonce: Nonce number used for attestation report. + * @array_size: Number of array members copied to user buffer. + * Relevant for HL_INFO_USER_MAPPINGS info ioctl. + * @fw_sub_opcode: generic requests sub opcodes. + * @pad: Padding to 64 bit. + */ +struct hl_info_args { + __u64 return_pointer; + __u32 return_size; + __u32 op; + + union { + __u32 dcore_id; + __u32 ctx_id; + __u32 period_ms; + __u32 pll_index; + __u32 eventfd; + __u32 user_buffer_actual_size; + __u32 sec_attest_nonce; + __u32 array_size; + __u32 fw_sub_opcode; + }; + + __u32 pad; +}; + +/* Opcode to create a new command buffer */ +#define HL_CB_OP_CREATE 0 +/* Opcode to destroy previously created command buffer */ +#define HL_CB_OP_DESTROY 1 +/* Opcode to retrieve information about a command buffer */ +#define HL_CB_OP_INFO 2 + +/* 2MB minus 32 bytes for 2xMSG_PROT */ +#define HL_MAX_CB_SIZE (0x200000 - 32) + +/* Indicates whether the command buffer should be mapped to the device's MMU */ +#define HL_CB_FLAGS_MAP 0x1 + +/* Used with HL_CB_OP_INFO opcode to get the device va address for kernel mapped CB */ +#define HL_CB_FLAGS_GET_DEVICE_VA 0x2 + +struct hl_cb_in { + /* Handle of CB or 0 if we want to create one */ + __u64 cb_handle; + /* HL_CB_OP_* */ + __u32 op; + + /* Size of CB. Maximum size is HL_MAX_CB_SIZE. The minimum size that + * will be allocated, regardless of this parameter's value, is PAGE_SIZE + */ + __u32 cb_size; + + /* Context ID - Currently not in use */ + __u32 ctx_id; + /* HL_CB_FLAGS_* */ + __u32 flags; +}; + +struct hl_cb_out { + union { + /* Handle of CB */ + __u64 cb_handle; + + union { + /* Information about CB */ + struct { + /* Usage count of CB */ + __u32 usage_cnt; + __u32 pad; + }; + + /* CB mapped address to device MMU */ + __u64 device_va; + }; + }; +}; + +union hl_cb_args { + struct hl_cb_in in; + struct hl_cb_out out; +}; + +/* HL_CS_CHUNK_FLAGS_ values + * + * HL_CS_CHUNK_FLAGS_USER_ALLOC_CB: + * Indicates if the CB was allocated and mapped by userspace + * (relevant to greco and above). User allocated CB is a command buffer, + * allocated by the user, via malloc (or similar). After allocating the + * CB, the user invokes - “memory ioctl” to map the user memory into a + * device virtual address. The user provides this address via the + * cb_handle field. The interface provides the ability to create a + * large CBs, Which aren’t limited to “HL_MAX_CB_SIZE”. Therefore, it + * increases the PCI-DMA queues throughput. This CB allocation method + * also reduces the use of Linux DMA-able memory pool. Which are limited + * and used by other Linux sub-systems. + */ +#define HL_CS_CHUNK_FLAGS_USER_ALLOC_CB 0x1 + +/* + * This structure size must always be fixed to 64-bytes for backward + * compatibility + */ +struct hl_cs_chunk { + union { + /* Goya/Gaudi: + * For external queue, this represents a Handle of CB on the + * Host. + * For internal queue in Goya, this represents an SRAM or + * a DRAM address of the internal CB. In Gaudi, this might also + * represent a mapped host address of the CB. + * + * Greco onwards: + * For H/W queue, this represents either a Handle of CB on the + * Host, or an SRAM, a DRAM, or a mapped host address of the CB. + * + * A mapped host address is in the device address space, after + * a host address was mapped by the device MMU. + */ + __u64 cb_handle; + + /* Relevant only when HL_CS_FLAGS_WAIT or + * HL_CS_FLAGS_COLLECTIVE_WAIT is set + * This holds address of array of u64 values that contain + * signal CS sequence numbers. The wait described by + * this job will listen on all those signals + * (wait event per signal) + */ + __u64 signal_seq_arr; + + /* + * Relevant only when HL_CS_FLAGS_WAIT or + * HL_CS_FLAGS_COLLECTIVE_WAIT is set + * along with HL_CS_FLAGS_ENCAP_SIGNALS. + * This is the CS sequence which has the encapsulated signals. + */ + __u64 encaps_signal_seq; + }; + + /* Index of queue to put the CB on */ + __u32 queue_index; + + union { + /* + * Size of command buffer with valid packets + * Can be smaller then actual CB size + */ + __u32 cb_size; + + /* Relevant only when HL_CS_FLAGS_WAIT or + * HL_CS_FLAGS_COLLECTIVE_WAIT is set. + * Number of entries in signal_seq_arr + */ + __u32 num_signal_seq_arr; + + /* Relevant only when HL_CS_FLAGS_WAIT or + * HL_CS_FLAGS_COLLECTIVE_WAIT is set along + * with HL_CS_FLAGS_ENCAP_SIGNALS + * This set the signals range that the user want to wait for + * out of the whole reserved signals range. + * e.g if the signals range is 20, and user don't want + * to wait for signal 8, so he set this offset to 7, then + * he call the API again with 9 and so on till 20. + */ + __u32 encaps_signal_offset; + }; + + /* HL_CS_CHUNK_FLAGS_* */ + __u32 cs_chunk_flags; + + /* Relevant only when HL_CS_FLAGS_COLLECTIVE_WAIT is set. + * This holds the collective engine ID. The wait described by this job + * will sync with this engine and with all NICs before completion. + */ + __u32 collective_engine_id; + + /* Align structure to 64 bytes */ + __u32 pad[10]; +}; + +/* SIGNAL/WAIT/COLLECTIVE_WAIT flags are mutually exclusive */ +#define HL_CS_FLAGS_FORCE_RESTORE 0x1 +#define HL_CS_FLAGS_SIGNAL 0x2 +#define HL_CS_FLAGS_WAIT 0x4 +#define HL_CS_FLAGS_COLLECTIVE_WAIT 0x8 + +#define HL_CS_FLAGS_TIMESTAMP 0x20 +#define HL_CS_FLAGS_STAGED_SUBMISSION 0x40 +#define HL_CS_FLAGS_STAGED_SUBMISSION_FIRST 0x80 +#define HL_CS_FLAGS_STAGED_SUBMISSION_LAST 0x100 +#define HL_CS_FLAGS_CUSTOM_TIMEOUT 0x200 +#define HL_CS_FLAGS_SKIP_RESET_ON_TIMEOUT 0x400 + +/* + * The encapsulated signals CS is merged into the existing CS ioctls. + * In order to use this feature need to follow the below procedure: + * 1. Reserve signals, set the CS type to HL_CS_FLAGS_RESERVE_SIGNALS_ONLY + * the output of this API will be the SOB offset from CFG_BASE. + * this address will be used to patch CB cmds to do the signaling for this + * SOB by incrementing it's value. + * for reverting the reservation use HL_CS_FLAGS_UNRESERVE_SIGNALS_ONLY + * CS type, note that this might fail if out-of-sync happened to the SOB + * value, in case other signaling request to the same SOB occurred between + * reserve-unreserve calls. + * 2. Use the staged CS to do the encapsulated signaling jobs. + * use HL_CS_FLAGS_STAGED_SUBMISSION and HL_CS_FLAGS_STAGED_SUBMISSION_FIRST + * along with HL_CS_FLAGS_ENCAP_SIGNALS flag, and set encaps_signal_offset + * field. This offset allows app to wait on part of the reserved signals. + * 3. Use WAIT/COLLECTIVE WAIT CS along with HL_CS_FLAGS_ENCAP_SIGNALS flag + * to wait for the encapsulated signals. + */ +#define HL_CS_FLAGS_ENCAP_SIGNALS 0x800 +#define HL_CS_FLAGS_RESERVE_SIGNALS_ONLY 0x1000 +#define HL_CS_FLAGS_UNRESERVE_SIGNALS_ONLY 0x2000 + +/* + * The engine cores CS is merged into the existing CS ioctls. + * Use it to control the engine cores mode. + */ +#define HL_CS_FLAGS_ENGINE_CORE_COMMAND 0x4000 + +/* + * The flush HBW PCI writes is merged into the existing CS ioctls. + * Used to flush all HBW PCI writes. + * This is a blocking operation and for this reason the user shall not use + * the return sequence number (which will be invalid anyway) + */ +#define HL_CS_FLAGS_FLUSH_PCI_HBW_WRITES 0x8000 + +/* + * The engines CS is merged into the existing CS ioctls. + * Use it to control engines modes. + */ +#define HL_CS_FLAGS_ENGINES_COMMAND 0x10000 + +#define HL_CS_STATUS_SUCCESS 0 + +#define HL_MAX_JOBS_PER_CS 512 + +/* + * enum hl_engine_command - engine command + * + * @HL_ENGINE_CORE_HALT: engine core halt + * @HL_ENGINE_CORE_RUN: engine core run + * @HL_ENGINE_STALL: user engine/s stall + * @HL_ENGINE_RESUME: user engine/s resume + */ +enum hl_engine_command { + HL_ENGINE_CORE_HALT = 1, + HL_ENGINE_CORE_RUN = 2, + HL_ENGINE_STALL = 3, + HL_ENGINE_RESUME = 4, + HL_ENGINE_COMMAND_MAX +}; + +struct hl_cs_in { + + union { + struct { + /* this holds address of array of hl_cs_chunk for restore phase */ + __u64 chunks_restore; + + /* holds address of array of hl_cs_chunk for execution phase */ + __u64 chunks_execute; + }; + + /* Valid only when HL_CS_FLAGS_ENGINE_CORE_COMMAND is set */ + struct { + /* this holds address of array of uint32 for engine_cores */ + __u64 engine_cores; + + /* number of engine cores in engine_cores array */ + __u32 num_engine_cores; + + /* the core command to be sent towards engine cores */ + __u32 core_command; + }; + + /* Valid only when HL_CS_FLAGS_ENGINES_COMMAND is set */ + struct { + /* this holds address of array of uint32 for engines */ + __u64 engines; + + /* number of engines in engines array */ + __u32 num_engines; + + /* the engine command to be sent towards engines */ + __u32 engine_command; + }; + }; + + union { + /* + * Sequence number of a staged submission CS + * valid only if HL_CS_FLAGS_STAGED_SUBMISSION is set and + * HL_CS_FLAGS_STAGED_SUBMISSION_FIRST is unset. + */ + __u64 seq; + + /* + * Encapsulated signals handle id + * Valid for two flows: + * 1. CS with encapsulated signals: + * when HL_CS_FLAGS_STAGED_SUBMISSION and + * HL_CS_FLAGS_STAGED_SUBMISSION_FIRST + * and HL_CS_FLAGS_ENCAP_SIGNALS are set. + * 2. unreserve signals: + * valid when HL_CS_FLAGS_UNRESERVE_SIGNALS_ONLY is set. + */ + __u32 encaps_sig_handle_id; + + /* Valid only when HL_CS_FLAGS_RESERVE_SIGNALS_ONLY is set */ + struct { + /* Encapsulated signals number */ + __u32 encaps_signals_count; + + /* Encapsulated signals queue index (stream) */ + __u32 encaps_signals_q_idx; + }; + }; + + /* Number of chunks in restore phase array. Maximum number is + * HL_MAX_JOBS_PER_CS + */ + __u32 num_chunks_restore; + + /* Number of chunks in execution array. Maximum number is + * HL_MAX_JOBS_PER_CS + */ + __u32 num_chunks_execute; + + /* timeout in seconds - valid only if HL_CS_FLAGS_CUSTOM_TIMEOUT + * is set + */ + __u32 timeout; + + /* HL_CS_FLAGS_* */ + __u32 cs_flags; + + /* Context ID - Currently not in use */ + __u32 ctx_id; + __u8 pad[4]; +}; + +struct hl_cs_out { + union { + /* + * seq holds the sequence number of the CS to pass to wait + * ioctl. All values are valid except for 0 and ULLONG_MAX + */ + __u64 seq; + + /* Valid only when HL_CS_FLAGS_RESERVE_SIGNALS_ONLY is set */ + struct { + /* This is the reserved signal handle id */ + __u32 handle_id; + + /* This is the signals count */ + __u32 count; + }; + }; + + /* HL_CS_STATUS */ + __u32 status; + + /* + * SOB base address offset + * Valid only when HL_CS_FLAGS_RESERVE_SIGNALS_ONLY or HL_CS_FLAGS_SIGNAL is set + */ + __u32 sob_base_addr_offset; + + /* + * Count of completed signals in SOB before current signal submission. + * Valid only when (HL_CS_FLAGS_ENCAP_SIGNALS & HL_CS_FLAGS_STAGED_SUBMISSION) + * or HL_CS_FLAGS_SIGNAL is set + */ + __u16 sob_count_before_submission; + __u16 pad[3]; +}; + +union hl_cs_args { + struct hl_cs_in in; + struct hl_cs_out out; +}; + +#define HL_WAIT_CS_FLAGS_INTERRUPT 0x2 +#define HL_WAIT_CS_FLAGS_INTERRUPT_MASK 0xFFF00000 +#define HL_WAIT_CS_FLAGS_ANY_CQ_INTERRUPT 0xFFF00000 +#define HL_WAIT_CS_FLAGS_ANY_DEC_INTERRUPT 0xFFE00000 +#define HL_WAIT_CS_FLAGS_MULTI_CS 0x4 +#define HL_WAIT_CS_FLAGS_INTERRUPT_KERNEL_CQ 0x10 +#define HL_WAIT_CS_FLAGS_REGISTER_INTERRUPT 0x20 + +#define HL_WAIT_MULTI_CS_LIST_MAX_LEN 32 + +struct hl_wait_cs_in { + union { + struct { + /* + * In case of wait_cs holds the CS sequence number. + * In case of wait for multi CS hold a user pointer to + * an array of CS sequence numbers + */ + __u64 seq; + /* Absolute timeout to wait for command submission + * in microseconds + */ + __u64 timeout_us; + }; + + struct { + union { + /* User address for completion comparison. + * upon interrupt, driver will compare the value pointed + * by this address with the supplied target value. + * in order not to perform any comparison, set address + * to all 1s. + * Relevant only when HL_WAIT_CS_FLAGS_INTERRUPT is set + */ + __u64 addr; + + /* cq_counters_handle to a kernel mapped cb which contains + * cq counters. + * Relevant only when HL_WAIT_CS_FLAGS_INTERRUPT_KERNEL_CQ is set + */ + __u64 cq_counters_handle; + }; + + /* Target value for completion comparison */ + __u64 target; + }; + }; + + /* Context ID - Currently not in use */ + __u32 ctx_id; + + /* HL_WAIT_CS_FLAGS_* + * If HL_WAIT_CS_FLAGS_INTERRUPT is set, this field should include + * interrupt id according to HL_WAIT_CS_FLAGS_INTERRUPT_MASK + * + * in order to wait for any CQ interrupt, set interrupt value to + * HL_WAIT_CS_FLAGS_ANY_CQ_INTERRUPT. + * + * in order to wait for any decoder interrupt, set interrupt value to + * HL_WAIT_CS_FLAGS_ANY_DEC_INTERRUPT. + */ + __u32 flags; + + union { + struct { + /* Multi CS API info- valid entries in multi-CS array */ + __u8 seq_arr_len; + __u8 pad[7]; + }; + + /* Absolute timeout to wait for an interrupt in microseconds. + * Relevant only when HL_WAIT_CS_FLAGS_INTERRUPT is set + */ + __u64 interrupt_timeout_us; + }; + + /* + * cq counter offset inside the counters cb pointed by cq_counters_handle above. + * upon interrupt, driver will compare the value pointed + * by this address (cq_counters_handle + cq_counters_offset) + * with the supplied target value. + * relevant only when HL_WAIT_CS_FLAGS_INTERRUPT_KERNEL_CQ is set + */ + __u64 cq_counters_offset; + + /* + * Timestamp_handle timestamps buffer handle. + * relevant only when HL_WAIT_CS_FLAGS_REGISTER_INTERRUPT is set + */ + __u64 timestamp_handle; + + /* + * Timestamp_offset is offset inside the timestamp buffer pointed by timestamp_handle above. + * upon interrupt, if the cq reached the target value then driver will write + * timestamp to this offset. + * relevant only when HL_WAIT_CS_FLAGS_REGISTER_INTERRUPT is set + */ + __u64 timestamp_offset; +}; + +#define HL_WAIT_CS_STATUS_COMPLETED 0 +#define HL_WAIT_CS_STATUS_BUSY 1 +#define HL_WAIT_CS_STATUS_TIMEDOUT 2 +#define HL_WAIT_CS_STATUS_ABORTED 3 + +#define HL_WAIT_CS_STATUS_FLAG_GONE 0x1 +#define HL_WAIT_CS_STATUS_FLAG_TIMESTAMP_VLD 0x2 + +struct hl_wait_cs_out { + /* HL_WAIT_CS_STATUS_* */ + __u32 status; + /* HL_WAIT_CS_STATUS_FLAG* */ + __u32 flags; + /* + * valid only if HL_WAIT_CS_STATUS_FLAG_TIMESTAMP_VLD is set + * for wait_cs: timestamp of CS completion + * for wait_multi_cs: timestamp of FIRST CS completion + */ + __s64 timestamp_nsec; + /* multi CS completion bitmap */ + __u32 cs_completion_map; + __u32 pad; +}; + +union hl_wait_cs_args { + struct hl_wait_cs_in in; + struct hl_wait_cs_out out; +}; + +/* Opcode to allocate device memory */ +#define HL_MEM_OP_ALLOC 0 + +/* Opcode to free previously allocated device memory */ +#define HL_MEM_OP_FREE 1 + +/* Opcode to map host and device memory */ +#define HL_MEM_OP_MAP 2 + +/* Opcode to unmap previously mapped host and device memory */ +#define HL_MEM_OP_UNMAP 3 + +/* Opcode to map a hw block */ +#define HL_MEM_OP_MAP_BLOCK 4 + +/* Opcode to create DMA-BUF object for an existing device memory allocation + * and to export an FD of that DMA-BUF back to the caller + */ +#define HL_MEM_OP_EXPORT_DMABUF_FD 5 + +/* Opcode to create timestamps pool for user interrupts registration support + * The memory will be allocated by the kernel driver, A timestamp buffer which the user + * will get handle to it for mmap, and another internal buffer used by the + * driver for registration management + * The memory will be freed when the user closes the file descriptor(ctx close) + */ +#define HL_MEM_OP_TS_ALLOC 6 + +/* Memory flags */ +#define HL_MEM_CONTIGUOUS 0x1 +#define HL_MEM_SHARED 0x2 +#define HL_MEM_USERPTR 0x4 +#define HL_MEM_FORCE_HINT 0x8 +#define HL_MEM_PREFETCH 0x40 + +/** + * structure hl_mem_in - structure that handle input args for memory IOCTL + * @union arg: union of structures to be used based on the input operation + * @op: specify the requested memory operation (one of the HL_MEM_OP_* definitions). + * @flags: flags for the memory operation (one of the HL_MEM_* definitions). + * For the HL_MEM_OP_EXPORT_DMABUF_FD opcode, this field holds the DMA-BUF file/FD flags. + * @ctx_id: context ID - currently not in use. + * @num_of_elements: number of timestamp elements used only with HL_MEM_OP_TS_ALLOC opcode. + */ +struct hl_mem_in { + union { + /** + * structure for device memory allocation (used with the HL_MEM_OP_ALLOC op) + * @mem_size: memory size to allocate + * @page_size: page size to use on allocation. when the value is 0 the default page + * size will be taken. + */ + struct { + __u64 mem_size; + __u64 page_size; + } alloc; + + /** + * structure for free-ing device memory (used with the HL_MEM_OP_FREE op) + * @handle: handle returned from HL_MEM_OP_ALLOC + */ + struct { + __u64 handle; + } free; + + /** + * structure for mapping device memory (used with the HL_MEM_OP_MAP op) + * @hint_addr: requested virtual address of mapped memory. + * the driver will try to map the requested region to this hint + * address, as long as the address is valid and not already mapped. + * the user should check the returned address of the IOCTL to make + * sure he got the hint address. + * passing 0 here means that the driver will choose the address itself. + * @handle: handle returned from HL_MEM_OP_ALLOC. + */ + struct { + __u64 hint_addr; + __u64 handle; + } map_device; + + /** + * structure for mapping host memory (used with the HL_MEM_OP_MAP op) + * @host_virt_addr: address of allocated host memory. + * @hint_addr: requested virtual address of mapped memory. + * the driver will try to map the requested region to this hint + * address, as long as the address is valid and not already mapped. + * the user should check the returned address of the IOCTL to make + * sure he got the hint address. + * passing 0 here means that the driver will choose the address itself. + * @size: size of allocated host memory. + */ + struct { + __u64 host_virt_addr; + __u64 hint_addr; + __u64 mem_size; + } map_host; + + /** + * structure for mapping hw block (used with the HL_MEM_OP_MAP_BLOCK op) + * @block_addr:HW block address to map, a handle and size will be returned + * to the user and will be used to mmap the relevant block. + * only addresses from configuration space are allowed. + */ + struct { + __u64 block_addr; + } map_block; + + /** + * structure for unmapping host memory (used with the HL_MEM_OP_UNMAP op) + * @device_virt_addr: virtual address returned from HL_MEM_OP_MAP + */ + struct { + __u64 device_virt_addr; + } unmap; + + /** + * structure for exporting DMABUF object (used with + * the HL_MEM_OP_EXPORT_DMABUF_FD op) + * @addr: for Gaudi1, the driver expects a physical address + * inside the device's DRAM. this is because in Gaudi1 + * we don't have MMU that covers the device's DRAM. + * for all other ASICs, the driver expects a device + * virtual address that represents the start address of + * a mapped DRAM memory area inside the device. + * the address must be the same as was received from the + * driver during a previous HL_MEM_OP_MAP operation. + * @mem_size: size of memory to export. + * @offset: for Gaudi1, this value must be 0. For all other ASICs, + * the driver expects an offset inside of the memory area + * describe by addr. the offset represents the start + * address of that the exported dma-buf object describes. + */ + struct { + __u64 addr; + __u64 mem_size; + __u64 offset; + } export_dmabuf_fd; + }; + + __u32 op; + __u32 flags; + __u32 ctx_id; + __u32 num_of_elements; +}; + +struct hl_mem_out { + union { + /* + * Used for HL_MEM_OP_MAP as the virtual address that was + * assigned in the device VA space. + * A value of 0 means the requested operation failed. + */ + __u64 device_virt_addr; + + /* + * Used in HL_MEM_OP_ALLOC + * This is the assigned handle for the allocated memory + */ + __u64 handle; + + struct { + /* + * Used in HL_MEM_OP_MAP_BLOCK. + * This is the assigned handle for the mapped block + */ + __u64 block_handle; + + /* + * Used in HL_MEM_OP_MAP_BLOCK + * This is the size of the mapped block + */ + __u32 block_size; + + __u32 pad; + }; + + /* Returned in HL_MEM_OP_EXPORT_DMABUF_FD. Represents the + * DMA-BUF object that was created to describe a memory + * allocation on the device's memory space. The FD should be + * passed to the importer driver + */ + __s32 fd; + }; +}; + +union hl_mem_args { + struct hl_mem_in in; + struct hl_mem_out out; +}; + +#define HL_DEBUG_MAX_AUX_VALUES 10 + +struct hl_debug_params_etr { + /* Address in memory to allocate buffer */ + __u64 buffer_address; + + /* Size of buffer to allocate */ + __u64 buffer_size; + + /* Sink operation mode: SW fifo, HW fifo, Circular buffer */ + __u32 sink_mode; + __u32 pad; +}; + +struct hl_debug_params_etf { + /* Address in memory to allocate buffer */ + __u64 buffer_address; + + /* Size of buffer to allocate */ + __u64 buffer_size; + + /* Sink operation mode: SW fifo, HW fifo, Circular buffer */ + __u32 sink_mode; + __u32 pad; +}; + +struct hl_debug_params_stm { + /* Two bit masks for HW event and Stimulus Port */ + __u64 he_mask; + __u64 sp_mask; + + /* Trace source ID */ + __u32 id; + + /* Frequency for the timestamp register */ + __u32 frequency; +}; + +struct hl_debug_params_bmon { + /* Two address ranges that the user can request to filter */ + __u64 start_addr0; + __u64 addr_mask0; + + __u64 start_addr1; + __u64 addr_mask1; + + /* Capture window configuration */ + __u32 bw_win; + __u32 win_capture; + + /* Trace source ID */ + __u32 id; + + /* Control register */ + __u32 control; + + /* Two more address ranges that the user can request to filter */ + __u64 start_addr2; + __u64 end_addr2; + + __u64 start_addr3; + __u64 end_addr3; +}; + +struct hl_debug_params_spmu { + /* Event types selection */ + __u64 event_types[HL_DEBUG_MAX_AUX_VALUES]; + + /* Number of event types selection */ + __u32 event_types_num; + + /* TRC configuration register values */ + __u32 pmtrc_val; + __u32 trc_ctrl_host_val; + __u32 trc_en_host_val; +}; + +/* Opcode for ETR component */ +#define HL_DEBUG_OP_ETR 0 +/* Opcode for ETF component */ +#define HL_DEBUG_OP_ETF 1 +/* Opcode for STM component */ +#define HL_DEBUG_OP_STM 2 +/* Opcode for FUNNEL component */ +#define HL_DEBUG_OP_FUNNEL 3 +/* Opcode for BMON component */ +#define HL_DEBUG_OP_BMON 4 +/* Opcode for SPMU component */ +#define HL_DEBUG_OP_SPMU 5 +/* Opcode for timestamp (deprecated) */ +#define HL_DEBUG_OP_TIMESTAMP 6 +/* Opcode for setting the device into or out of debug mode. The enable + * variable should be 1 for enabling debug mode and 0 for disabling it + */ +#define HL_DEBUG_OP_SET_MODE 7 + +struct hl_debug_args { + /* + * Pointer to user input structure. + * This field is relevant to specific opcodes. + */ + __u64 input_ptr; + /* Pointer to user output structure */ + __u64 output_ptr; + /* Size of user input structure */ + __u32 input_size; + /* Size of user output structure */ + __u32 output_size; + /* HL_DEBUG_OP_* */ + __u32 op; + /* + * Register index in the component, taken from the debug_regs_index enum + * in the various ASIC header files + */ + __u32 reg_idx; + /* Enable/disable */ + __u32 enable; + /* Context ID - Currently not in use */ + __u32 ctx_id; +}; + +/* + * Various information operations such as: + * - H/W IP information + * - Current dram usage + * + * The user calls this IOCTL with an opcode that describes the required + * information. The user should supply a pointer to a user-allocated memory + * chunk, which will be filled by the driver with the requested information. + * + * The user supplies the maximum amount of size to copy into the user's memory, + * in order to prevent data corruption in case of differences between the + * definitions of structures in kernel and userspace, e.g. in case of old + * userspace and new kernel driver + */ +#define HL_IOCTL_INFO \ + _IOWR('H', 0x01, struct hl_info_args) + +/* + * Command Buffer + * - Request a Command Buffer + * - Destroy a Command Buffer + * + * The command buffers are memory blocks that reside in DMA-able address + * space and are physically contiguous so they can be accessed by the device + * directly. They are allocated using the coherent DMA API. + * + * When creating a new CB, the IOCTL returns a handle of it, and the user-space + * process needs to use that handle to mmap the buffer so it can access them. + * + * In some instances, the device must access the command buffer through the + * device's MMU, and thus its memory should be mapped. In these cases, user can + * indicate the driver that such a mapping is required. + * The resulting device virtual address will be used internally by the driver, + * and won't be returned to user. + * + */ +#define HL_IOCTL_CB \ + _IOWR('H', 0x02, union hl_cb_args) + +/* + * Command Submission + * + * To submit work to the device, the user need to call this IOCTL with a set + * of JOBS. That set of JOBS constitutes a CS object. + * Each JOB will be enqueued on a specific queue, according to the user's input. + * There can be more then one JOB per queue. + * + * The CS IOCTL will receive two sets of JOBS. One set is for "restore" phase + * and a second set is for "execution" phase. + * The JOBS on the "restore" phase are enqueued only after context-switch + * (or if its the first CS for this context). The user can also order the + * driver to run the "restore" phase explicitly + * + * Goya/Gaudi: + * There are two types of queues - external and internal. External queues + * are DMA queues which transfer data from/to the Host. All other queues are + * internal. The driver will get completion notifications from the device only + * on JOBS which are enqueued in the external queues. + * + * Greco onwards: + * There is a single type of queue for all types of engines, either DMA engines + * for transfers from/to the host or inside the device, or compute engines. + * The driver will get completion notifications from the device for all queues. + * + * For jobs on external queues, the user needs to create command buffers + * through the CB ioctl and give the CB's handle to the CS ioctl. For jobs on + * internal queues, the user needs to prepare a "command buffer" with packets + * on either the device SRAM/DRAM or the host, and give the device address of + * that buffer to the CS ioctl. + * For jobs on H/W queues both options of command buffers are valid. + * + * This IOCTL is asynchronous in regard to the actual execution of the CS. This + * means it returns immediately after ALL the JOBS were enqueued on their + * relevant queues. Therefore, the user mustn't assume the CS has been completed + * or has even started to execute. + * + * Upon successful enqueue, the IOCTL returns a sequence number which the user + * can use with the "Wait for CS" IOCTL to check whether the handle's CS + * non-internal JOBS have been completed. Note that if the CS has internal JOBS + * which can execute AFTER the external JOBS have finished, the driver might + * report that the CS has finished executing BEFORE the internal JOBS have + * actually finished executing. + * + * Even though the sequence number increments per CS, the user can NOT + * automatically assume that if CS with sequence number N finished, then CS + * with sequence number N-1 also finished. The user can make this assumption if + * and only if CS N and CS N-1 are exactly the same (same CBs for the same + * queues). + */ +#define HL_IOCTL_CS \ + _IOWR('H', 0x03, union hl_cs_args) + +/* + * Wait for Command Submission + * + * The user can call this IOCTL with a handle it received from the CS IOCTL + * to wait until the handle's CS has finished executing. The user will wait + * inside the kernel until the CS has finished or until the user-requested + * timeout has expired. + * + * If the timeout value is 0, the driver won't sleep at all. It will check + * the status of the CS and return immediately + * + * The return value of the IOCTL is a standard Linux error code. The possible + * values are: + * + * EINTR - Kernel waiting has been interrupted, e.g. due to OS signal + * that the user process received + * ETIMEDOUT - The CS has caused a timeout on the device + * EIO - The CS was aborted (usually because the device was reset) + * ENODEV - The device wants to do hard-reset (so user need to close FD) + * + * The driver also returns a custom define in case the IOCTL call returned 0. + * The define can be one of the following: + * + * HL_WAIT_CS_STATUS_COMPLETED - The CS has been completed successfully (0) + * HL_WAIT_CS_STATUS_BUSY - The CS is still executing (0) + * HL_WAIT_CS_STATUS_TIMEDOUT - The CS has caused a timeout on the device + * (ETIMEDOUT) + * HL_WAIT_CS_STATUS_ABORTED - The CS was aborted, usually because the + * device was reset (EIO) + */ + +#define HL_IOCTL_WAIT_CS \ + _IOWR('H', 0x04, union hl_wait_cs_args) + +/* + * Memory + * - Map host memory to device MMU + * - Unmap host memory from device MMU + * + * This IOCTL allows the user to map host memory to the device MMU + * + * For host memory, the IOCTL doesn't allocate memory. The user is supposed + * to allocate the memory in user-space (malloc/new). The driver pins the + * physical pages (up to the allowed limit by the OS), assigns a virtual + * address in the device VA space and initializes the device MMU. + * + * There is an option for the user to specify the requested virtual address. + * + */ +#define HL_IOCTL_MEMORY \ + _IOWR('H', 0x05, union hl_mem_args) + +/* + * Debug + * - Enable/disable the ETR/ETF/FUNNEL/STM/BMON/SPMU debug traces + * + * This IOCTL allows the user to get debug traces from the chip. + * + * Before the user can send configuration requests of the various + * debug/profile engines, it needs to set the device into debug mode. + * This is because the debug/profile infrastructure is shared component in the + * device and we can't allow multiple users to access it at the same time. + * + * Once a user set the device into debug mode, the driver won't allow other + * users to "work" with the device, i.e. open a FD. If there are multiple users + * opened on the device, the driver won't allow any user to debug the device. + * + * For each configuration request, the user needs to provide the register index + * and essential data such as buffer address and size. + * + * Once the user has finished using the debug/profile engines, he should + * set the device into non-debug mode, i.e. disable debug mode. + * + * The driver can decide to "kick out" the user if he abuses this interface. + * + */ +#define HL_IOCTL_DEBUG \ + _IOWR('H', 0x06, struct hl_debug_args) + +#define HL_COMMAND_START 0x01 +#define HL_COMMAND_END 0x07 + +#endif /* HABANALABS_H_ */ diff --git a/linux-headers/include/drm/i810_drm.h b/linux-headers/include/drm/i810_drm.h deleted file mode 100644 index d285d5e72e6..00000000000 --- a/linux-headers/include/drm/i810_drm.h +++ /dev/null @@ -1,292 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _I810_DRM_H_ -#define _I810_DRM_H_ - -#include "drm.h" - -#if defined(__cplusplus) -extern "C" { -#endif - -/* WARNING: These defines must be the same as what the Xserver uses. - * if you change them, you must change the defines in the Xserver. - */ - -#ifndef _I810_DEFINES_ -#define _I810_DEFINES_ - -#define I810_DMA_BUF_ORDER 12 -#define I810_DMA_BUF_SZ (1<> (X % 8)) & 1 - * - * - the subslice mask for each slice with one bit per subslice telling - * whether a subslice is available. Gen12 has dual-subslices, which are - * similar to two gen11 subslices. For gen12, this array represents dual- - * subslices. The availability of subslice Y in slice X can be queried - * with the following formula : - * - * (data[subslice_offset + - * X * subslice_stride + - * Y / 8] >> (Y % 8)) & 1 - * - * - the EU mask for each subslice in each slice with one bit per EU telling - * whether an EU is available. The availability of EU Z in subslice Y in - * slice X can be queried with the following formula : +/** + * struct drm_i915_query_topology_info * - * (data[eu_offset + - * (X * max_subslices + Y) * eu_stride + - * Z / 8] >> (Z % 8)) & 1 + * Describes slice/subslice/EU information queried by + * %DRM_I915_QUERY_TOPOLOGY_INFO */ struct drm_i915_query_topology_info { - /* + /** + * @flags: + * * Unused for now. Must be cleared to zero. */ __u16 flags; + /** + * @max_slices: + * + * The number of bits used to express the slice mask. + */ __u16 max_slices; + + /** + * @max_subslices: + * + * The number of bits used to express the subslice mask. + */ __u16 max_subslices; + + /** + * @max_eus_per_subslice: + * + * The number of bits in the EU mask that correspond to a single + * subslice's EUs. + */ __u16 max_eus_per_subslice; - /* + /** + * @subslice_offset: + * * Offset in data[] at which the subslice masks are stored. */ __u16 subslice_offset; - /* + /** + * @subslice_stride: + * * Stride at which each of the subslice masks for each slice are * stored. */ __u16 subslice_stride; - /* + /** + * @eu_offset: + * * Offset in data[] at which the EU masks are stored. */ __u16 eu_offset; - /* + /** + * @eu_stride: + * * Stride at which each of the EU masks for each subslice are stored. */ __u16 eu_stride; + /** + * @data: + * + * Contains 3 pieces of information : + * + * - The slice mask with one bit per slice telling whether a slice is + * available. The availability of slice X can be queried with the + * following formula : + * + * .. code:: c + * + * (data[X / 8] >> (X % 8)) & 1 + * + * Starting with Xe_HP platforms, Intel hardware no longer has + * traditional slices so i915 will always report a single slice + * (hardcoded slicemask = 0x1) which contains all of the platform's + * subslices. I.e., the mask here does not reflect any of the newer + * hardware concepts such as "gslices" or "cslices" since userspace + * is capable of inferring those from the subslice mask. + * + * - The subslice mask for each slice with one bit per subslice telling + * whether a subslice is available. Starting with Gen12 we use the + * term "subslice" to refer to what the hardware documentation + * describes as a "dual-subslices." The availability of subslice Y + * in slice X can be queried with the following formula : + * + * .. code:: c + * + * (data[subslice_offset + X * subslice_stride + Y / 8] >> (Y % 8)) & 1 + * + * - The EU mask for each subslice in each slice, with one bit per EU + * telling whether an EU is available. The availability of EU Z in + * subslice Y in slice X can be queried with the following formula : + * + * .. code:: c + * + * (data[eu_offset + + * (X * max_subslices + Y) * eu_stride + + * Z / 8 + * ] >> (Z % 8)) & 1 + */ __u8 data[]; }; +/** + * DOC: Engine Discovery uAPI + * + * Engine discovery uAPI is a way of enumerating physical engines present in a + * GPU associated with an open i915 DRM file descriptor. This supersedes the old + * way of using `DRM_IOCTL_I915_GETPARAM` and engine identifiers like + * `I915_PARAM_HAS_BLT`. + * + * The need for this interface came starting with Icelake and newer GPUs, which + * started to establish a pattern of having multiple engines of a same class, + * where not all instances were always completely functionally equivalent. + * + * Entry point for this uapi is `DRM_IOCTL_I915_QUERY` with the + * `DRM_I915_QUERY_ENGINE_INFO` as the queried item id. + * + * Example for getting the list of engines: + * + * .. code-block:: C + * + * struct drm_i915_query_engine_info *info; + * struct drm_i915_query_item item = { + * .query_id = DRM_I915_QUERY_ENGINE_INFO; + * }; + * struct drm_i915_query query = { + * .num_items = 1, + * .items_ptr = (uintptr_t)&item, + * }; + * int err, i; + * + * // First query the size of the blob we need, this needs to be large + * // enough to hold our array of engines. The kernel will fill out the + * // item.length for us, which is the number of bytes we need. + * // + * // Alternatively a large buffer can be allocated straight away enabling + * // querying in one pass, in which case item.length should contain the + * // length of the provided buffer. + * err = ioctl(fd, DRM_IOCTL_I915_QUERY, &query); + * if (err) ... + * + * info = calloc(1, item.length); + * // Now that we allocated the required number of bytes, we call the ioctl + * // again, this time with the data_ptr pointing to our newly allocated + * // blob, which the kernel can then populate with info on all engines. + * item.data_ptr = (uintptr_t)&info, + * + * err = ioctl(fd, DRM_IOCTL_I915_QUERY, &query); + * if (err) ... + * + * // We can now access each engine in the array + * for (i = 0; i < info->num_engines; i++) { + * struct drm_i915_engine_info einfo = info->engines[i]; + * u16 class = einfo.engine.class; + * u16 instance = einfo.engine.instance; + * .... + * } + * + * free(info); + * + * Each of the enumerated engines, apart from being defined by its class and + * instance (see `struct i915_engine_class_instance`), also can have flags and + * capabilities defined as documented in i915_drm.h. + * + * For instance video engines which support HEVC encoding will have the + * `I915_VIDEO_CLASS_CAPABILITY_HEVC` capability bit set. + * + * Engine discovery only fully comes to its own when combined with the new way + * of addressing engines when submitting batch buffers using contexts with + * engine maps configured. + */ + /** * struct drm_i915_engine_info * * Describes one engine and it's capabilities as known to the driver. */ struct drm_i915_engine_info { - /** Engine class and instance. */ + /** @engine: Engine class and instance. */ struct i915_engine_class_instance engine; - /** Reserved field. */ + /** @rsvd0: Reserved field. */ __u32 rsvd0; - /** Engine flags. */ + /** @flags: Engine flags. */ __u64 flags; +#define I915_ENGINE_INFO_HAS_LOGICAL_INSTANCE (1 << 0) - /** Capabilities of this engine. */ + /** @capabilities: Capabilities of this engine. */ __u64 capabilities; #define I915_VIDEO_CLASS_CAPABILITY_HEVC (1 << 0) #define I915_VIDEO_AND_ENHANCE_CLASS_CAPABILITY_SFC (1 << 1) - /** Reserved fields. */ - __u64 rsvd1[4]; + /** @logical_instance: Logical instance of engine */ + __u16 logical_instance; + + /** @rsvd1: Reserved fields. */ + __u16 rsvd1[3]; + /** @rsvd2: Reserved fields. */ + __u64 rsvd2[3]; }; /** @@ -2315,66 +3320,527 @@ struct drm_i915_engine_info { * an array of struct drm_i915_engine_info structures. */ struct drm_i915_query_engine_info { - /** Number of struct drm_i915_engine_info structs following. */ + /** @num_engines: Number of struct drm_i915_engine_info structs following. */ __u32 num_engines; - /** MBZ */ + /** @rsvd: MBZ */ __u32 rsvd[3]; - /** Marker for drm_i915_engine_info structures. */ + /** @engines: Marker for drm_i915_engine_info structures. */ struct drm_i915_engine_info engines[]; }; -/* - * Data written by the kernel with query DRM_I915_QUERY_PERF_CONFIG. +/** + * struct drm_i915_query_perf_config + * + * Data written by the kernel with query %DRM_I915_QUERY_PERF_CONFIG and + * %DRM_I915_QUERY_GEOMETRY_SUBSLICES. */ struct drm_i915_query_perf_config { union { - /* - * When query_item.flags == DRM_I915_QUERY_PERF_CONFIG_LIST, i915 sets - * this fields to the number of configurations available. + /** + * @n_configs: + * + * When &drm_i915_query_item.flags == + * %DRM_I915_QUERY_PERF_CONFIG_LIST, i915 sets this fields to + * the number of configurations available. */ __u64 n_configs; - /* - * When query_id == DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_ID, - * i915 will use the value in this field as configuration - * identifier to decide what data to write into config_ptr. + /** + * @config: + * + * When &drm_i915_query_item.flags == + * %DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_ID, i915 will use the + * value in this field as configuration identifier to decide + * what data to write into config_ptr. */ __u64 config; - /* - * When query_id == DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_UUID, - * i915 will use the value in this field as configuration - * identifier to decide what data to write into config_ptr. + /** + * @uuid: + * + * When &drm_i915_query_item.flags == + * %DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_UUID, i915 will use the + * value in this field as configuration identifier to decide + * what data to write into config_ptr. * * String formatted like "%08x-%04x-%04x-%04x-%012x" */ char uuid[36]; }; - /* + /** + * @flags: + * * Unused for now. Must be cleared to zero. */ __u32 flags; - /* - * When query_item.flags == DRM_I915_QUERY_PERF_CONFIG_LIST, i915 will - * write an array of __u64 of configuration identifiers. + /** + * @data: + * + * When &drm_i915_query_item.flags == %DRM_I915_QUERY_PERF_CONFIG_LIST, + * i915 will write an array of __u64 of configuration identifiers. * - * When query_item.flags == DRM_I915_QUERY_PERF_CONFIG_DATA, i915 will - * write a struct drm_i915_perf_oa_config. If the following fields of - * drm_i915_perf_oa_config are set not set to 0, i915 will write into - * the associated pointers the values of submitted when the + * When &drm_i915_query_item.flags == %DRM_I915_QUERY_PERF_CONFIG_DATA, + * i915 will write a struct drm_i915_perf_oa_config. If the following + * fields of struct drm_i915_perf_oa_config are not set to 0, i915 will + * write into the associated pointers the values of submitted when the * configuration was created : * - * - n_mux_regs - * - n_boolean_regs - * - n_flex_regs + * - &drm_i915_perf_oa_config.n_mux_regs + * - &drm_i915_perf_oa_config.n_boolean_regs + * - &drm_i915_perf_oa_config.n_flex_regs */ __u8 data[]; }; +/** + * enum drm_i915_gem_memory_class - Supported memory classes + */ +enum drm_i915_gem_memory_class { + /** @I915_MEMORY_CLASS_SYSTEM: System memory */ + I915_MEMORY_CLASS_SYSTEM = 0, + /** @I915_MEMORY_CLASS_DEVICE: Device local-memory */ + I915_MEMORY_CLASS_DEVICE, +}; + +/** + * struct drm_i915_gem_memory_class_instance - Identify particular memory region + */ +struct drm_i915_gem_memory_class_instance { + /** @memory_class: See enum drm_i915_gem_memory_class */ + __u16 memory_class; + + /** @memory_instance: Which instance */ + __u16 memory_instance; +}; + +/** + * struct drm_i915_memory_region_info - Describes one region as known to the + * driver. + * + * Note this is using both struct drm_i915_query_item and struct drm_i915_query. + * For this new query we are adding the new query id DRM_I915_QUERY_MEMORY_REGIONS + * at &drm_i915_query_item.query_id. + */ +struct drm_i915_memory_region_info { + /** @region: The class:instance pair encoding */ + struct drm_i915_gem_memory_class_instance region; + + /** @rsvd0: MBZ */ + __u32 rsvd0; + + /** + * @probed_size: Memory probed by the driver + * + * Note that it should not be possible to ever encounter a zero value + * here, also note that no current region type will ever return -1 here. + * Although for future region types, this might be a possibility. The + * same applies to the other size fields. + */ + __u64 probed_size; + + /** + * @unallocated_size: Estimate of memory remaining + * + * Requires CAP_PERFMON or CAP_SYS_ADMIN to get reliable accounting. + * Without this (or if this is an older kernel) the value here will + * always equal the @probed_size. Note this is only currently tracked + * for I915_MEMORY_CLASS_DEVICE regions (for other types the value here + * will always equal the @probed_size). + */ + __u64 unallocated_size; + + union { + /** @rsvd1: MBZ */ + __u64 rsvd1[8]; + struct { + /** + * @probed_cpu_visible_size: Memory probed by the driver + * that is CPU accessible. + * + * This will be always be <= @probed_size, and the + * remainder (if there is any) will not be CPU + * accessible. + * + * On systems without small BAR, the @probed_size will + * always equal the @probed_cpu_visible_size, since all + * of it will be CPU accessible. + * + * Note this is only tracked for + * I915_MEMORY_CLASS_DEVICE regions (for other types the + * value here will always equal the @probed_size). + * + * Note that if the value returned here is zero, then + * this must be an old kernel which lacks the relevant + * small-bar uAPI support (including + * I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS), but on + * such systems we should never actually end up with a + * small BAR configuration, assuming we are able to load + * the kernel module. Hence it should be safe to treat + * this the same as when @probed_cpu_visible_size == + * @probed_size. + */ + __u64 probed_cpu_visible_size; + + /** + * @unallocated_cpu_visible_size: Estimate of CPU + * visible memory remaining. + * + * Note this is only tracked for + * I915_MEMORY_CLASS_DEVICE regions (for other types the + * value here will always equal the + * @probed_cpu_visible_size). + * + * Requires CAP_PERFMON or CAP_SYS_ADMIN to get reliable + * accounting. Without this the value here will always + * equal the @probed_cpu_visible_size. Note this is only + * currently tracked for I915_MEMORY_CLASS_DEVICE + * regions (for other types the value here will also + * always equal the @probed_cpu_visible_size). + * + * If this is an older kernel the value here will be + * zero, see also @probed_cpu_visible_size. + */ + __u64 unallocated_cpu_visible_size; + }; + }; +}; + +/** + * struct drm_i915_query_memory_regions + * + * The region info query enumerates all regions known to the driver by filling + * in an array of struct drm_i915_memory_region_info structures. + * + * Example for getting the list of supported regions: + * + * .. code-block:: C + * + * struct drm_i915_query_memory_regions *info; + * struct drm_i915_query_item item = { + * .query_id = DRM_I915_QUERY_MEMORY_REGIONS; + * }; + * struct drm_i915_query query = { + * .num_items = 1, + * .items_ptr = (uintptr_t)&item, + * }; + * int err, i; + * + * // First query the size of the blob we need, this needs to be large + * // enough to hold our array of regions. The kernel will fill out the + * // item.length for us, which is the number of bytes we need. + * err = ioctl(fd, DRM_IOCTL_I915_QUERY, &query); + * if (err) ... + * + * info = calloc(1, item.length); + * // Now that we allocated the required number of bytes, we call the ioctl + * // again, this time with the data_ptr pointing to our newly allocated + * // blob, which the kernel can then populate with the all the region info. + * item.data_ptr = (uintptr_t)&info, + * + * err = ioctl(fd, DRM_IOCTL_I915_QUERY, &query); + * if (err) ... + * + * // We can now access each region in the array + * for (i = 0; i < info->num_regions; i++) { + * struct drm_i915_memory_region_info mr = info->regions[i]; + * u16 class = mr.region.class; + * u16 instance = mr.region.instance; + * + * .... + * } + * + * free(info); + */ +struct drm_i915_query_memory_regions { + /** @num_regions: Number of supported regions */ + __u32 num_regions; + + /** @rsvd: MBZ */ + __u32 rsvd[3]; + + /** @regions: Info about each supported region */ + struct drm_i915_memory_region_info regions[]; +}; + +/** + * DOC: GuC HWCONFIG blob uAPI + * + * The GuC produces a blob with information about the current device. + * i915 reads this blob from GuC and makes it available via this uAPI. + * + * The format and meaning of the blob content are documented in the + * Programmer's Reference Manual. + */ + +/** + * struct drm_i915_gem_create_ext - Existing gem_create behaviour, with added + * extension support using struct i915_user_extension. + * + * Note that new buffer flags should be added here, at least for the stuff that + * is immutable. Previously we would have two ioctls, one to create the object + * with gem_create, and another to apply various parameters, however this + * creates some ambiguity for the params which are considered immutable. Also in + * general we're phasing out the various SET/GET ioctls. + */ +struct drm_i915_gem_create_ext { + /** + * @size: Requested size for the object. + * + * The (page-aligned) allocated size for the object will be returned. + * + * On platforms like DG2/ATS the kernel will always use 64K or larger + * pages for I915_MEMORY_CLASS_DEVICE. The kernel also requires a + * minimum of 64K GTT alignment for such objects. + * + * NOTE: Previously the ABI here required a minimum GTT alignment of 2M + * on DG2/ATS, due to how the hardware implemented 64K GTT page support, + * where we had the following complications: + * + * 1) The entire PDE (which covers a 2MB virtual address range), must + * contain only 64K PTEs, i.e mixing 4K and 64K PTEs in the same + * PDE is forbidden by the hardware. + * + * 2) We still need to support 4K PTEs for I915_MEMORY_CLASS_SYSTEM + * objects. + * + * However on actual production HW this was completely changed to now + * allow setting a TLB hint at the PTE level (see PS64), which is a lot + * more flexible than the above. With this the 2M restriction was + * dropped where we now only require 64K. + */ + __u64 size; + + /** + * @handle: Returned handle for the object. + * + * Object handles are nonzero. + */ + __u32 handle; + + /** + * @flags: Optional flags. + * + * Supported values: + * + * I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS - Signal to the kernel that + * the object will need to be accessed via the CPU. + * + * Only valid when placing objects in I915_MEMORY_CLASS_DEVICE, and only + * strictly required on configurations where some subset of the device + * memory is directly visible/mappable through the CPU (which we also + * call small BAR), like on some DG2+ systems. Note that this is quite + * undesirable, but due to various factors like the client CPU, BIOS etc + * it's something we can expect to see in the wild. See + * &drm_i915_memory_region_info.probed_cpu_visible_size for how to + * determine if this system applies. + * + * Note that one of the placements MUST be I915_MEMORY_CLASS_SYSTEM, to + * ensure the kernel can always spill the allocation to system memory, + * if the object can't be allocated in the mappable part of + * I915_MEMORY_CLASS_DEVICE. + * + * Also note that since the kernel only supports flat-CCS on objects + * that can *only* be placed in I915_MEMORY_CLASS_DEVICE, we therefore + * don't support I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS together with + * flat-CCS. + * + * Without this hint, the kernel will assume that non-mappable + * I915_MEMORY_CLASS_DEVICE is preferred for this object. Note that the + * kernel can still migrate the object to the mappable part, as a last + * resort, if userspace ever CPU faults this object, but this might be + * expensive, and so ideally should be avoided. + * + * On older kernels which lack the relevant small-bar uAPI support (see + * also &drm_i915_memory_region_info.probed_cpu_visible_size), + * usage of the flag will result in an error, but it should NEVER be + * possible to end up with a small BAR configuration, assuming we can + * also successfully load the i915 kernel module. In such cases the + * entire I915_MEMORY_CLASS_DEVICE region will be CPU accessible, and as + * such there are zero restrictions on where the object can be placed. + */ +#define I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS (1 << 0) + __u32 flags; + + /** + * @extensions: The chain of extensions to apply to this object. + * + * This will be useful in the future when we need to support several + * different extensions, and we need to apply more than one when + * creating the object. See struct i915_user_extension. + * + * If we don't supply any extensions then we get the same old gem_create + * behaviour. + * + * For I915_GEM_CREATE_EXT_MEMORY_REGIONS usage see + * struct drm_i915_gem_create_ext_memory_regions. + * + * For I915_GEM_CREATE_EXT_PROTECTED_CONTENT usage see + * struct drm_i915_gem_create_ext_protected_content. + * + * For I915_GEM_CREATE_EXT_SET_PAT usage see + * struct drm_i915_gem_create_ext_set_pat. + */ +#define I915_GEM_CREATE_EXT_MEMORY_REGIONS 0 +#define I915_GEM_CREATE_EXT_PROTECTED_CONTENT 1 +#define I915_GEM_CREATE_EXT_SET_PAT 2 + __u64 extensions; +}; + +/** + * struct drm_i915_gem_create_ext_memory_regions - The + * I915_GEM_CREATE_EXT_MEMORY_REGIONS extension. + * + * Set the object with the desired set of placements/regions in priority + * order. Each entry must be unique and supported by the device. + * + * This is provided as an array of struct drm_i915_gem_memory_class_instance, or + * an equivalent layout of class:instance pair encodings. See struct + * drm_i915_query_memory_regions and DRM_I915_QUERY_MEMORY_REGIONS for how to + * query the supported regions for a device. + * + * As an example, on discrete devices, if we wish to set the placement as + * device local-memory we can do something like: + * + * .. code-block:: C + * + * struct drm_i915_gem_memory_class_instance region_lmem = { + * .memory_class = I915_MEMORY_CLASS_DEVICE, + * .memory_instance = 0, + * }; + * struct drm_i915_gem_create_ext_memory_regions regions = { + * .base = { .name = I915_GEM_CREATE_EXT_MEMORY_REGIONS }, + * .regions = (uintptr_t)®ion_lmem, + * .num_regions = 1, + * }; + * struct drm_i915_gem_create_ext create_ext = { + * .size = 16 * PAGE_SIZE, + * .extensions = (uintptr_t)®ions, + * }; + * + * int err = ioctl(fd, DRM_IOCTL_I915_GEM_CREATE_EXT, &create_ext); + * if (err) ... + * + * At which point we get the object handle in &drm_i915_gem_create_ext.handle, + * along with the final object size in &drm_i915_gem_create_ext.size, which + * should account for any rounding up, if required. + * + * Note that userspace has no means of knowing the current backing region + * for objects where @num_regions is larger than one. The kernel will only + * ensure that the priority order of the @regions array is honoured, either + * when initially placing the object, or when moving memory around due to + * memory pressure + * + * On Flat-CCS capable HW, compression is supported for the objects residing + * in I915_MEMORY_CLASS_DEVICE. When such objects (compressed) have other + * memory class in @regions and migrated (by i915, due to memory + * constraints) to the non I915_MEMORY_CLASS_DEVICE region, then i915 needs to + * decompress the content. But i915 doesn't have the required information to + * decompress the userspace compressed objects. + * + * So i915 supports Flat-CCS, on the objects which can reside only on + * I915_MEMORY_CLASS_DEVICE regions. + */ +struct drm_i915_gem_create_ext_memory_regions { + /** @base: Extension link. See struct i915_user_extension. */ + struct i915_user_extension base; + + /** @pad: MBZ */ + __u32 pad; + /** @num_regions: Number of elements in the @regions array. */ + __u32 num_regions; + /** + * @regions: The regions/placements array. + * + * An array of struct drm_i915_gem_memory_class_instance. + */ + __u64 regions; +}; + +/** + * struct drm_i915_gem_create_ext_protected_content - The + * I915_OBJECT_PARAM_PROTECTED_CONTENT extension. + * + * If this extension is provided, buffer contents are expected to be protected + * by PXP encryption and require decryption for scan out and processing. This + * is only possible on platforms that have PXP enabled, on all other scenarios + * using this extension will cause the ioctl to fail and return -ENODEV. The + * flags parameter is reserved for future expansion and must currently be set + * to zero. + * + * The buffer contents are considered invalid after a PXP session teardown. + * + * The encryption is guaranteed to be processed correctly only if the object + * is submitted with a context created using the + * I915_CONTEXT_PARAM_PROTECTED_CONTENT flag. This will also enable extra checks + * at submission time on the validity of the objects involved. + * + * Below is an example on how to create a protected object: + * + * .. code-block:: C + * + * struct drm_i915_gem_create_ext_protected_content protected_ext = { + * .base = { .name = I915_GEM_CREATE_EXT_PROTECTED_CONTENT }, + * .flags = 0, + * }; + * struct drm_i915_gem_create_ext create_ext = { + * .size = PAGE_SIZE, + * .extensions = (uintptr_t)&protected_ext, + * }; + * + * int err = ioctl(fd, DRM_IOCTL_I915_GEM_CREATE_EXT, &create_ext); + * if (err) ... + */ +struct drm_i915_gem_create_ext_protected_content { + /** @base: Extension link. See struct i915_user_extension. */ + struct i915_user_extension base; + /** @flags: reserved for future usage, currently MBZ */ + __u32 flags; +}; + +/** + * struct drm_i915_gem_create_ext_set_pat - The + * I915_GEM_CREATE_EXT_SET_PAT extension. + * + * If this extension is provided, the specified caching policy (PAT index) is + * applied to the buffer object. + * + * Below is an example on how to create an object with specific caching policy: + * + * .. code-block:: C + * + * struct drm_i915_gem_create_ext_set_pat set_pat_ext = { + * .base = { .name = I915_GEM_CREATE_EXT_SET_PAT }, + * .pat_index = 0, + * }; + * struct drm_i915_gem_create_ext create_ext = { + * .size = PAGE_SIZE, + * .extensions = (uintptr_t)&set_pat_ext, + * }; + * + * int err = ioctl(fd, DRM_IOCTL_I915_GEM_CREATE_EXT, &create_ext); + * if (err) ... + */ +struct drm_i915_gem_create_ext_set_pat { + /** @base: Extension link. See struct i915_user_extension. */ + struct i915_user_extension base; + /** + * @pat_index: PAT index to be set + * PAT index is a bit field in Page Table Entry to control caching + * behaviors for GPU accesses. The definition of PAT index is + * platform dependent and can be found in hardware specifications, + */ + __u32 pat_index; + /** @rsvd: reserved for future use */ + __u32 rsvd; +}; + +/* ID of the protected content session managed by i915 when PXP is active */ +#define I915_PROTECTED_CONTENT_DEFAULT_SESSION 0xf + #if defined(__cplusplus) } #endif diff --git a/linux-headers/include/drm/ivpu_accel.h b/linux-headers/include/drm/ivpu_accel.h new file mode 100644 index 00000000000..a58a14c9f22 --- /dev/null +++ b/linux-headers/include/drm/ivpu_accel.h @@ -0,0 +1,313 @@ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ +/* + * Copyright (C) 2020-2023 Intel Corporation + */ + +#ifndef __UAPI_IVPU_DRM_H__ +#define __UAPI_IVPU_DRM_H__ + +#include "drm.h" + +#if defined(__cplusplus) +extern "C" { +#endif + +#define DRM_IVPU_DRIVER_MAJOR 1 +#define DRM_IVPU_DRIVER_MINOR 0 + +#define DRM_IVPU_GET_PARAM 0x00 +#define DRM_IVPU_SET_PARAM 0x01 +#define DRM_IVPU_BO_CREATE 0x02 +#define DRM_IVPU_BO_INFO 0x03 +#define DRM_IVPU_SUBMIT 0x05 +#define DRM_IVPU_BO_WAIT 0x06 + +#define DRM_IOCTL_IVPU_GET_PARAM \ + DRM_IOWR(DRM_COMMAND_BASE + DRM_IVPU_GET_PARAM, struct drm_ivpu_param) + +#define DRM_IOCTL_IVPU_SET_PARAM \ + DRM_IOW(DRM_COMMAND_BASE + DRM_IVPU_SET_PARAM, struct drm_ivpu_param) + +#define DRM_IOCTL_IVPU_BO_CREATE \ + DRM_IOWR(DRM_COMMAND_BASE + DRM_IVPU_BO_CREATE, struct drm_ivpu_bo_create) + +#define DRM_IOCTL_IVPU_BO_INFO \ + DRM_IOWR(DRM_COMMAND_BASE + DRM_IVPU_BO_INFO, struct drm_ivpu_bo_info) + +#define DRM_IOCTL_IVPU_SUBMIT \ + DRM_IOW(DRM_COMMAND_BASE + DRM_IVPU_SUBMIT, struct drm_ivpu_submit) + +#define DRM_IOCTL_IVPU_BO_WAIT \ + DRM_IOWR(DRM_COMMAND_BASE + DRM_IVPU_BO_WAIT, struct drm_ivpu_bo_wait) + +/** + * DOC: contexts + * + * VPU contexts have private virtual address space, job queues and priority. + * Each context is identified by an unique ID. Context is created on open(). + */ + +#define DRM_IVPU_PARAM_DEVICE_ID 0 +#define DRM_IVPU_PARAM_DEVICE_REVISION 1 +#define DRM_IVPU_PARAM_PLATFORM_TYPE 2 +#define DRM_IVPU_PARAM_CORE_CLOCK_RATE 3 +#define DRM_IVPU_PARAM_NUM_CONTEXTS 4 +#define DRM_IVPU_PARAM_CONTEXT_BASE_ADDRESS 5 +#define DRM_IVPU_PARAM_CONTEXT_PRIORITY 6 +#define DRM_IVPU_PARAM_CONTEXT_ID 7 +#define DRM_IVPU_PARAM_FW_API_VERSION 8 +#define DRM_IVPU_PARAM_ENGINE_HEARTBEAT 9 +#define DRM_IVPU_PARAM_UNIQUE_INFERENCE_ID 10 +#define DRM_IVPU_PARAM_TILE_CONFIG 11 +#define DRM_IVPU_PARAM_SKU 12 +#define DRM_IVPU_PARAM_CAPABILITIES 13 + +#define DRM_IVPU_PLATFORM_TYPE_SILICON 0 + +#define DRM_IVPU_CONTEXT_PRIORITY_IDLE 0 +#define DRM_IVPU_CONTEXT_PRIORITY_NORMAL 1 +#define DRM_IVPU_CONTEXT_PRIORITY_FOCUS 2 +#define DRM_IVPU_CONTEXT_PRIORITY_REALTIME 3 + +#define DRM_IVPU_CAP_METRIC_STREAMER 1 +#define DRM_IVPU_CAP_DMA_MEMORY_RANGE 2 + +/** + * struct drm_ivpu_param - Get/Set VPU parameters + */ +struct drm_ivpu_param { + /** + * @param: + * + * Supported params: + * + * %DRM_IVPU_PARAM_DEVICE_ID: + * PCI Device ID of the VPU device (read-only) + * + * %DRM_IVPU_PARAM_DEVICE_REVISION: + * VPU device revision (read-only) + * + * %DRM_IVPU_PARAM_PLATFORM_TYPE: + * Returns %DRM_IVPU_PLATFORM_TYPE_SILICON on real hardware or device specific + * platform type when executing on a simulator or emulator (read-only) + * + * %DRM_IVPU_PARAM_CORE_CLOCK_RATE: + * Current PLL frequency (read-only) + * + * %DRM_IVPU_PARAM_NUM_CONTEXTS: + * Maximum number of simultaneously existing contexts (read-only) + * + * %DRM_IVPU_PARAM_CONTEXT_BASE_ADDRESS: + * Lowest VPU virtual address available in the current context (read-only) + * + * %DRM_IVPU_PARAM_CONTEXT_PRIORITY: + * Value of current context scheduling priority (read-write). + * See DRM_IVPU_CONTEXT_PRIORITY_* for possible values. + * + * %DRM_IVPU_PARAM_CONTEXT_ID: + * Current context ID, always greater than 0 (read-only) + * + * %DRM_IVPU_PARAM_FW_API_VERSION: + * Firmware API version array (read-only) + * + * %DRM_IVPU_PARAM_ENGINE_HEARTBEAT: + * Heartbeat value from an engine (read-only). + * Engine ID (i.e. DRM_IVPU_ENGINE_COMPUTE) is given via index. + * + * %DRM_IVPU_PARAM_UNIQUE_INFERENCE_ID: + * Device-unique inference ID (read-only) + * + * %DRM_IVPU_PARAM_TILE_CONFIG: + * VPU tile configuration (read-only) + * + * %DRM_IVPU_PARAM_SKU: + * VPU SKU ID (read-only) + * + */ + __u32 param; + + /** @index: Index for params that have multiple instances */ + __u32 index; + + /** @value: Param value */ + __u64 value; +}; + +#define DRM_IVPU_BO_SHAVE_MEM 0x00000001 +#define DRM_IVPU_BO_HIGH_MEM DRM_IVPU_BO_SHAVE_MEM +#define DRM_IVPU_BO_MAPPABLE 0x00000002 +#define DRM_IVPU_BO_DMA_MEM 0x00000004 + +#define DRM_IVPU_BO_CACHED 0x00000000 +#define DRM_IVPU_BO_UNCACHED 0x00010000 +#define DRM_IVPU_BO_WC 0x00020000 +#define DRM_IVPU_BO_CACHE_MASK 0x00030000 + +#define DRM_IVPU_BO_FLAGS \ + (DRM_IVPU_BO_HIGH_MEM | \ + DRM_IVPU_BO_MAPPABLE | \ + DRM_IVPU_BO_DMA_MEM | \ + DRM_IVPU_BO_CACHE_MASK) + +/** + * struct drm_ivpu_bo_create - Create BO backed by SHMEM + * + * Create GEM buffer object allocated in SHMEM memory. + */ +struct drm_ivpu_bo_create { + /** @size: The size in bytes of the allocated memory */ + __u64 size; + + /** + * @flags: + * + * Supported flags: + * + * %DRM_IVPU_BO_HIGH_MEM: + * + * Allocate VPU address from >4GB range. + * Buffer object with vpu address >4GB can be always accessed by the + * VPU DMA engine, but some HW generation may not be able to access + * this memory from then firmware running on the VPU management processor. + * Suitable for input, output and some scratch buffers. + * + * %DRM_IVPU_BO_MAPPABLE: + * + * Buffer object can be mapped using mmap(). + * + * %DRM_IVPU_BO_CACHED: + * + * Allocated BO will be cached on host side (WB) and snooped on the VPU side. + * This is the default caching mode. + * + * %DRM_IVPU_BO_UNCACHED: + * + * Allocated BO will not be cached on host side nor snooped on the VPU side. + * + * %DRM_IVPU_BO_WC: + * + * Allocated BO will use write combining buffer for writes but reads will be + * uncached. + */ + __u32 flags; + + /** @handle: Returned GEM object handle */ + __u32 handle; + + /** @vpu_addr: Returned VPU virtual address */ + __u64 vpu_addr; +}; + +/** + * struct drm_ivpu_bo_info - Query buffer object info + */ +struct drm_ivpu_bo_info { + /** @handle: Handle of the queried BO */ + __u32 handle; + + /** @flags: Returned flags used to create the BO */ + __u32 flags; + + /** @vpu_addr: Returned VPU virtual address */ + __u64 vpu_addr; + + /** + * @mmap_offset: + * + * Returned offset to be used in mmap(). 0 in case the BO is not mappable. + */ + __u64 mmap_offset; + + /** @size: Returned GEM object size, aligned to PAGE_SIZE */ + __u64 size; +}; + +/* drm_ivpu_submit engines */ +#define DRM_IVPU_ENGINE_COMPUTE 0 +#define DRM_IVPU_ENGINE_COPY 1 + +/** + * struct drm_ivpu_submit - Submit commands to the VPU + * + * Execute a single command buffer on a given VPU engine. + * Handles to all referenced buffer objects have to be provided in @buffers_ptr. + * + * User space may wait on job completion using %DRM_IVPU_BO_WAIT ioctl. + */ +struct drm_ivpu_submit { + /** + * @buffers_ptr: + * + * A pointer to an u32 array of GEM handles of the BOs required for this job. + * The number of elements in the array must be equal to the value given by @buffer_count. + * + * The first BO is the command buffer. The rest of array has to contain all + * BOs referenced from the command buffer. + */ + __u64 buffers_ptr; + + /** @buffer_count: Number of elements in the @buffers_ptr */ + __u32 buffer_count; + + /** + * @engine: Select the engine this job should be executed on + * + * %DRM_IVPU_ENGINE_COMPUTE: + * + * Performs Deep Learning Neural Compute Inference Operations + * + * %DRM_IVPU_ENGINE_COPY: + * + * Performs memory copy operations to/from system memory allocated for VPU + */ + __u32 engine; + + /** @flags: Reserved for future use - must be zero */ + __u32 flags; + + /** + * @commands_offset: + * + * Offset inside the first buffer in @buffers_ptr containing commands + * to be executed. The offset has to be 8-byte aligned. + */ + __u32 commands_offset; +}; + +/* drm_ivpu_bo_wait job status codes */ +#define DRM_IVPU_JOB_STATUS_SUCCESS 0 + +/** + * struct drm_ivpu_bo_wait - Wait for BO to become inactive + * + * Blocks until a given buffer object becomes inactive. + * With @timeout_ms set to 0 returns immediately. + */ +struct drm_ivpu_bo_wait { + /** @handle: Handle to the buffer object to be waited on */ + __u32 handle; + + /** @flags: Reserved for future use - must be zero */ + __u32 flags; + + /** @timeout_ns: Absolute timeout in nanoseconds (may be zero) */ + __s64 timeout_ns; + + /** + * @job_status: + * + * Job status code which is updated after the job is completed. + * &DRM_IVPU_JOB_STATUS_SUCCESS or device specific error otherwise. + * Valid only if @handle points to a command buffer. + */ + __u32 job_status; + + /** @pad: Padding - must be zero */ + __u32 pad; +}; + +#if defined(__cplusplus) +} +#endif + +#endif /* __UAPI_IVPU_DRM_H__ */ diff --git a/linux-headers/include/drm/mga_drm.h b/linux-headers/include/drm/mga_drm.h deleted file mode 100644 index 79300111482..00000000000 --- a/linux-headers/include/drm/mga_drm.h +++ /dev/null @@ -1,427 +0,0 @@ -/* mga_drm.h -- Public header for the Matrox g200/g400 driver -*- linux-c -*- - * Created: Tue Jan 25 01:50:01 1999 by jhartmann@precisioninsight.com - * - * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas. - * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California. - * All rights reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * - * Authors: - * Jeff Hartmann - * Keith Whitwell - * - * Rewritten by: - * Gareth Hughes - */ - -#ifndef __MGA_DRM_H__ -#define __MGA_DRM_H__ - -#include "drm.h" - -#if defined(__cplusplus) -extern "C" { -#endif - -/* WARNING: If you change any of these defines, make sure to change the - * defines in the Xserver file (mga_sarea.h) - */ - -#ifndef __MGA_SAREA_DEFINES__ -#define __MGA_SAREA_DEFINES__ - -/* WARP pipe flags - */ -#define MGA_F 0x1 /* fog */ -#define MGA_A 0x2 /* alpha */ -#define MGA_S 0x4 /* specular */ -#define MGA_T2 0x8 /* multitexture */ - -#define MGA_WARP_TGZ 0 -#define MGA_WARP_TGZF (MGA_F) -#define MGA_WARP_TGZA (MGA_A) -#define MGA_WARP_TGZAF (MGA_F|MGA_A) -#define MGA_WARP_TGZS (MGA_S) -#define MGA_WARP_TGZSF (MGA_S|MGA_F) -#define MGA_WARP_TGZSA (MGA_S|MGA_A) -#define MGA_WARP_TGZSAF (MGA_S|MGA_F|MGA_A) -#define MGA_WARP_T2GZ (MGA_T2) -#define MGA_WARP_T2GZF (MGA_T2|MGA_F) -#define MGA_WARP_T2GZA (MGA_T2|MGA_A) -#define MGA_WARP_T2GZAF (MGA_T2|MGA_A|MGA_F) -#define MGA_WARP_T2GZS (MGA_T2|MGA_S) -#define MGA_WARP_T2GZSF (MGA_T2|MGA_S|MGA_F) -#define MGA_WARP_T2GZSA (MGA_T2|MGA_S|MGA_A) -#define MGA_WARP_T2GZSAF (MGA_T2|MGA_S|MGA_F|MGA_A) - -#define MGA_MAX_G200_PIPES 8 /* no multitex */ -#define MGA_MAX_G400_PIPES 16 -#define MGA_MAX_WARP_PIPES MGA_MAX_G400_PIPES -#define MGA_WARP_UCODE_SIZE 32768 /* in bytes */ - -#define MGA_CARD_TYPE_G200 1 -#define MGA_CARD_TYPE_G400 2 -#define MGA_CARD_TYPE_G450 3 /* not currently used */ -#define MGA_CARD_TYPE_G550 4 - -#define MGA_FRONT 0x1 -#define MGA_BACK 0x2 -#define MGA_DEPTH 0x4 - -/* What needs to be changed for the current vertex dma buffer? - */ -#define MGA_UPLOAD_CONTEXT 0x1 -#define MGA_UPLOAD_TEX0 0x2 -#define MGA_UPLOAD_TEX1 0x4 -#define MGA_UPLOAD_PIPE 0x8 -#define MGA_UPLOAD_TEX0IMAGE 0x10 /* handled client-side */ -#define MGA_UPLOAD_TEX1IMAGE 0x20 /* handled client-side */ -#define MGA_UPLOAD_2D 0x40 -#define MGA_WAIT_AGE 0x80 /* handled client-side */ -#define MGA_UPLOAD_CLIPRECTS 0x100 /* handled client-side */ -#if 0 -#define MGA_DMA_FLUSH 0x200 /* set when someone gets the lock - quiescent */ -#endif - -/* 32 buffers of 64k each, total 2 meg. - */ -#define MGA_BUFFER_SIZE (1 << 16) -#define MGA_NUM_BUFFERS 128 - -/* Keep these small for testing. - */ -#define MGA_NR_SAREA_CLIPRECTS 8 - -/* 2 heaps (1 for card, 1 for agp), each divided into up to 128 - * regions, subject to a minimum region size of (1<<16) == 64k. - * - * Clients may subdivide regions internally, but when sharing between - * clients, the region size is the minimum granularity. - */ - -#define MGA_CARD_HEAP 0 -#define MGA_AGP_HEAP 1 -#define MGA_NR_TEX_HEAPS 2 -#define MGA_NR_TEX_REGIONS 16 -#define MGA_LOG_MIN_TEX_REGION_SIZE 16 - -#define DRM_MGA_IDLE_RETRY 2048 - -#endif /* __MGA_SAREA_DEFINES__ */ - -/* Setup registers for 3D context - */ -typedef struct { - unsigned int dstorg; - unsigned int maccess; - unsigned int plnwt; - unsigned int dwgctl; - unsigned int alphactrl; - unsigned int fogcolor; - unsigned int wflag; - unsigned int tdualstage0; - unsigned int tdualstage1; - unsigned int fcol; - unsigned int stencil; - unsigned int stencilctl; -} drm_mga_context_regs_t; - -/* Setup registers for 2D, X server - */ -typedef struct { - unsigned int pitch; -} drm_mga_server_regs_t; - -/* Setup registers for each texture unit - */ -typedef struct { - unsigned int texctl; - unsigned int texctl2; - unsigned int texfilter; - unsigned int texbordercol; - unsigned int texorg; - unsigned int texwidth; - unsigned int texheight; - unsigned int texorg1; - unsigned int texorg2; - unsigned int texorg3; - unsigned int texorg4; -} drm_mga_texture_regs_t; - -/* General aging mechanism - */ -typedef struct { - unsigned int head; /* Position of head pointer */ - unsigned int wrap; /* Primary DMA wrap count */ -} drm_mga_age_t; - -typedef struct _drm_mga_sarea { - /* The channel for communication of state information to the kernel - * on firing a vertex dma buffer. - */ - drm_mga_context_regs_t context_state; - drm_mga_server_regs_t server_state; - drm_mga_texture_regs_t tex_state[2]; - unsigned int warp_pipe; - unsigned int dirty; - unsigned int vertsize; - - /* The current cliprects, or a subset thereof. - */ - struct drm_clip_rect boxes[MGA_NR_SAREA_CLIPRECTS]; - unsigned int nbox; - - /* Information about the most recently used 3d drawable. The - * client fills in the req_* fields, the server fills in the - * exported_ fields and puts the cliprects into boxes, above. - * - * The client clears the exported_drawable field before - * clobbering the boxes data. - */ - unsigned int req_drawable; /* the X drawable id */ - unsigned int req_draw_buffer; /* MGA_FRONT or MGA_BACK */ - - unsigned int exported_drawable; - unsigned int exported_index; - unsigned int exported_stamp; - unsigned int exported_buffers; - unsigned int exported_nfront; - unsigned int exported_nback; - int exported_back_x, exported_front_x, exported_w; - int exported_back_y, exported_front_y, exported_h; - struct drm_clip_rect exported_boxes[MGA_NR_SAREA_CLIPRECTS]; - - /* Counters for aging textures and for client-side throttling. - */ - unsigned int status[4]; - unsigned int last_wrap; - - drm_mga_age_t last_frame; - unsigned int last_enqueue; /* last time a buffer was enqueued */ - unsigned int last_dispatch; /* age of the most recently dispatched buffer */ - unsigned int last_quiescent; /* */ - - /* LRU lists for texture memory in agp space and on the card. - */ - struct drm_tex_region texList[MGA_NR_TEX_HEAPS][MGA_NR_TEX_REGIONS + 1]; - unsigned int texAge[MGA_NR_TEX_HEAPS]; - - /* Mechanism to validate card state. - */ - int ctxOwner; -} drm_mga_sarea_t; - -/* MGA specific ioctls - * The device specific ioctl range is 0x40 to 0x79. - */ -#define DRM_MGA_INIT 0x00 -#define DRM_MGA_FLUSH 0x01 -#define DRM_MGA_RESET 0x02 -#define DRM_MGA_SWAP 0x03 -#define DRM_MGA_CLEAR 0x04 -#define DRM_MGA_VERTEX 0x05 -#define DRM_MGA_INDICES 0x06 -#define DRM_MGA_ILOAD 0x07 -#define DRM_MGA_BLIT 0x08 -#define DRM_MGA_GETPARAM 0x09 - -/* 3.2: - * ioctls for operating on fences. - */ -#define DRM_MGA_SET_FENCE 0x0a -#define DRM_MGA_WAIT_FENCE 0x0b -#define DRM_MGA_DMA_BOOTSTRAP 0x0c - -#define DRM_IOCTL_MGA_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_INIT, drm_mga_init_t) -#define DRM_IOCTL_MGA_FLUSH DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_FLUSH, struct drm_lock) -#define DRM_IOCTL_MGA_RESET DRM_IO( DRM_COMMAND_BASE + DRM_MGA_RESET) -#define DRM_IOCTL_MGA_SWAP DRM_IO( DRM_COMMAND_BASE + DRM_MGA_SWAP) -#define DRM_IOCTL_MGA_CLEAR DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_CLEAR, drm_mga_clear_t) -#define DRM_IOCTL_MGA_VERTEX DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_VERTEX, drm_mga_vertex_t) -#define DRM_IOCTL_MGA_INDICES DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_INDICES, drm_mga_indices_t) -#define DRM_IOCTL_MGA_ILOAD DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_ILOAD, drm_mga_iload_t) -#define DRM_IOCTL_MGA_BLIT DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_BLIT, drm_mga_blit_t) -#define DRM_IOCTL_MGA_GETPARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_MGA_GETPARAM, drm_mga_getparam_t) -#define DRM_IOCTL_MGA_SET_FENCE DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_SET_FENCE, __u32) -#define DRM_IOCTL_MGA_WAIT_FENCE DRM_IOWR(DRM_COMMAND_BASE + DRM_MGA_WAIT_FENCE, __u32) -#define DRM_IOCTL_MGA_DMA_BOOTSTRAP DRM_IOWR(DRM_COMMAND_BASE + DRM_MGA_DMA_BOOTSTRAP, drm_mga_dma_bootstrap_t) - -typedef struct _drm_mga_warp_index { - int installed; - unsigned long phys_addr; - int size; -} drm_mga_warp_index_t; - -typedef struct drm_mga_init { - enum { - MGA_INIT_DMA = 0x01, - MGA_CLEANUP_DMA = 0x02 - } func; - - unsigned long sarea_priv_offset; - - int chipset; - int sgram; - - unsigned int maccess; - - unsigned int fb_cpp; - unsigned int front_offset, front_pitch; - unsigned int back_offset, back_pitch; - - unsigned int depth_cpp; - unsigned int depth_offset, depth_pitch; - - unsigned int texture_offset[MGA_NR_TEX_HEAPS]; - unsigned int texture_size[MGA_NR_TEX_HEAPS]; - - unsigned long fb_offset; - unsigned long mmio_offset; - unsigned long status_offset; - unsigned long warp_offset; - unsigned long primary_offset; - unsigned long buffers_offset; -} drm_mga_init_t; - -typedef struct drm_mga_dma_bootstrap { - /** - * \name AGP texture region - * - * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, these fields will - * be filled in with the actual AGP texture settings. - * - * \warning - * If these fields are non-zero, but dma_mga_dma_bootstrap::agp_mode - * is zero, it means that PCI memory (most likely through the use of - * an IOMMU) is being used for "AGP" textures. - */ - /*@{ */ - unsigned long texture_handle; /**< Handle used to map AGP textures. */ - __u32 texture_size; /**< Size of the AGP texture region. */ - /*@} */ - - /** - * Requested size of the primary DMA region. - * - * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, this field will be - * filled in with the actual AGP mode. If AGP was not available - */ - __u32 primary_size; - - /** - * Requested number of secondary DMA buffers. - * - * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, this field will be - * filled in with the actual number of secondary DMA buffers - * allocated. Particularly when PCI DMA is used, this may be - * (subtantially) less than the number requested. - */ - __u32 secondary_bin_count; - - /** - * Requested size of each secondary DMA buffer. - * - * While the kernel \b is free to reduce - * dma_mga_dma_bootstrap::secondary_bin_count, it is \b not allowed - * to reduce dma_mga_dma_bootstrap::secondary_bin_size. - */ - __u32 secondary_bin_size; - - /** - * Bit-wise mask of AGPSTAT2_* values. Currently only \c AGPSTAT2_1X, - * \c AGPSTAT2_2X, and \c AGPSTAT2_4X are supported. If this value is - * zero, it means that PCI DMA should be used, even if AGP is - * possible. - * - * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, this field will be - * filled in with the actual AGP mode. If AGP was not available - * (i.e., PCI DMA was used), this value will be zero. - */ - __u32 agp_mode; - - /** - * Desired AGP GART size, measured in megabytes. - */ - __u8 agp_size; -} drm_mga_dma_bootstrap_t; - -typedef struct drm_mga_clear { - unsigned int flags; - unsigned int clear_color; - unsigned int clear_depth; - unsigned int color_mask; - unsigned int depth_mask; -} drm_mga_clear_t; - -typedef struct drm_mga_vertex { - int idx; /* buffer to queue */ - int used; /* bytes in use */ - int discard; /* client finished with buffer? */ -} drm_mga_vertex_t; - -typedef struct drm_mga_indices { - int idx; /* buffer to queue */ - unsigned int start; - unsigned int end; - int discard; /* client finished with buffer? */ -} drm_mga_indices_t; - -typedef struct drm_mga_iload { - int idx; - unsigned int dstorg; - unsigned int length; -} drm_mga_iload_t; - -typedef struct _drm_mga_blit { - unsigned int planemask; - unsigned int srcorg; - unsigned int dstorg; - int src_pitch, dst_pitch; - int delta_sx, delta_sy; - int delta_dx, delta_dy; - int height, ydir; /* flip image vertically */ - int source_pitch, dest_pitch; -} drm_mga_blit_t; - -/* 3.1: An ioctl to get parameters that aren't available to the 3d - * client any other way. - */ -#define MGA_PARAM_IRQ_NR 1 - -/* 3.2: Query the actual card type. The DDX only distinguishes between - * G200 chips and non-G200 chips, which it calls G400. It turns out that - * there are some very sublte differences between the G4x0 chips and the G550 - * chips. Using this parameter query, a client-side driver can detect the - * difference between a G4x0 and a G550. - */ -#define MGA_PARAM_CARD_TYPE 2 - -typedef struct drm_mga_getparam { - int param; - void *value; -} drm_mga_getparam_t; - -#if defined(__cplusplus) -} -#endif - -#endif diff --git a/linux-headers/include/drm/msm_drm.h b/linux-headers/include/drm/msm_drm.h index a6c1f3eb262..6c34272a13f 100644 --- a/linux-headers/include/drm/msm_drm.h +++ b/linux-headers/include/drm/msm_drm.h @@ -67,20 +67,40 @@ struct drm_msm_timespec { __s64 tv_nsec; /* nanoseconds */ }; -#define MSM_PARAM_GPU_ID 0x01 -#define MSM_PARAM_GMEM_SIZE 0x02 -#define MSM_PARAM_CHIP_ID 0x03 -#define MSM_PARAM_MAX_FREQ 0x04 -#define MSM_PARAM_TIMESTAMP 0x05 -#define MSM_PARAM_GMEM_BASE 0x06 -#define MSM_PARAM_NR_RINGS 0x07 -#define MSM_PARAM_PP_PGTABLE 0x08 /* => 1 for per-process pagetables, else 0 */ -#define MSM_PARAM_FAULTS 0x09 +/* Below "RO" indicates a read-only param, "WO" indicates write-only, and + * "RW" indicates a param that can be both read (GET_PARAM) and written + * (SET_PARAM) + */ +#define MSM_PARAM_GPU_ID 0x01 /* RO */ +#define MSM_PARAM_GMEM_SIZE 0x02 /* RO */ +#define MSM_PARAM_CHIP_ID 0x03 /* RO */ +#define MSM_PARAM_MAX_FREQ 0x04 /* RO */ +#define MSM_PARAM_TIMESTAMP 0x05 /* RO */ +#define MSM_PARAM_GMEM_BASE 0x06 /* RO */ +#define MSM_PARAM_PRIORITIES 0x07 /* RO: The # of priority levels */ +#define MSM_PARAM_PP_PGTABLE 0x08 /* RO: Deprecated, always returns zero */ +#define MSM_PARAM_FAULTS 0x09 /* RO */ +#define MSM_PARAM_SUSPENDS 0x0a /* RO */ +#define MSM_PARAM_SYSPROF 0x0b /* WO: 1 preserves perfcntrs, 2 also disables suspend */ +#define MSM_PARAM_COMM 0x0c /* WO: override for task->comm */ +#define MSM_PARAM_CMDLINE 0x0d /* WO: override for task cmdline */ +#define MSM_PARAM_VA_START 0x0e /* RO: start of valid GPU iova range */ +#define MSM_PARAM_VA_SIZE 0x0f /* RO: size of valid GPU iova range (bytes) */ + +/* For backwards compat. The original support for preemption was based on + * a single ring per priority level so # of priority levels equals the # + * of rings. With drm/scheduler providing additional levels of priority, + * the number of priorities is greater than the # of rings. The param is + * renamed to better reflect this. + */ +#define MSM_PARAM_NR_RINGS MSM_PARAM_PRIORITIES struct drm_msm_param { __u32 pipe; /* in, MSM_PIPE_x */ __u32 param; /* in, MSM_PARAM_x */ __u64 value; /* out (get_param) or in (set_param) */ + __u32 len; /* zero for non-pointer params */ + __u32 pad; /* must be zero */ }; /* @@ -93,13 +113,12 @@ struct drm_msm_param { /* cache modes */ #define MSM_BO_CACHED 0x00010000 #define MSM_BO_WC 0x00020000 -#define MSM_BO_UNCACHED 0x00040000 +#define MSM_BO_UNCACHED 0x00040000 /* deprecated, use MSM_BO_WC */ +#define MSM_BO_CACHED_COHERENT 0x080000 #define MSM_BO_FLAGS (MSM_BO_SCANOUT | \ MSM_BO_GPU_READONLY | \ - MSM_BO_CACHED | \ - MSM_BO_WC | \ - MSM_BO_UNCACHED) + MSM_BO_CACHE_MASK) struct drm_msm_gem_new { __u64 size; /* in */ @@ -118,6 +137,8 @@ struct drm_msm_gem_new { #define MSM_INFO_GET_IOVA 0x01 /* get iova, returned by value */ #define MSM_INFO_SET_NAME 0x02 /* set the debug name (by pointer) */ #define MSM_INFO_GET_NAME 0x03 /* get debug name, returned by pointer */ +#define MSM_INFO_SET_IOVA 0x04 /* set the iova, passed by value */ +#define MSM_INFO_GET_FLAGS 0x05 /* get the MSM_BO_x flags */ struct drm_msm_gem_info { __u32 handle; /* in */ @@ -130,8 +151,13 @@ struct drm_msm_gem_info { #define MSM_PREP_READ 0x01 #define MSM_PREP_WRITE 0x02 #define MSM_PREP_NOSYNC 0x04 +#define MSM_PREP_BOOST 0x08 -#define MSM_PREP_FLAGS (MSM_PREP_READ | MSM_PREP_WRITE | MSM_PREP_NOSYNC) +#define MSM_PREP_FLAGS (MSM_PREP_READ | \ + MSM_PREP_WRITE | \ + MSM_PREP_NOSYNC | \ + MSM_PREP_BOOST | \ + 0) struct drm_msm_gem_cpu_prep { __u32 handle; /* in */ @@ -160,7 +186,11 @@ struct drm_msm_gem_cpu_fini { */ struct drm_msm_gem_submit_reloc { __u32 submit_offset; /* in, offset from submit_bo */ +#ifdef __cplusplus + __u32 _or; /* in, value OR'd with result */ +#else __u32 or; /* in, value OR'd with result */ +#endif __s32 shift; /* in, amount of left shift (can be negative) */ __u32 reloc_idx; /* in, index of reloc_bo buffer */ __u64 reloc_offset; /* in, offset from start of reloc_bo */ @@ -201,10 +231,12 @@ struct drm_msm_gem_submit_cmd { #define MSM_SUBMIT_BO_READ 0x0001 #define MSM_SUBMIT_BO_WRITE 0x0002 #define MSM_SUBMIT_BO_DUMP 0x0004 +#define MSM_SUBMIT_BO_NO_IMPLICIT 0x0008 #define MSM_SUBMIT_BO_FLAGS (MSM_SUBMIT_BO_READ | \ MSM_SUBMIT_BO_WRITE | \ - MSM_SUBMIT_BO_DUMP) + MSM_SUBMIT_BO_DUMP | \ + MSM_SUBMIT_BO_NO_IMPLICIT) struct drm_msm_gem_submit_bo { __u32 flags; /* in, mask of MSM_SUBMIT_BO_x */ @@ -219,6 +251,7 @@ struct drm_msm_gem_submit_bo { #define MSM_SUBMIT_SUDO 0x10000000 /* run submitted cmds from RB */ #define MSM_SUBMIT_SYNCOBJ_IN 0x08000000 /* enable input syncobj */ #define MSM_SUBMIT_SYNCOBJ_OUT 0x04000000 /* enable output syncobj */ +#define MSM_SUBMIT_FENCE_SN_IN 0x02000000 /* userspace passes in seqno fence */ #define MSM_SUBMIT_FLAGS ( \ MSM_SUBMIT_NO_IMPLICIT | \ MSM_SUBMIT_FENCE_FD_IN | \ @@ -226,6 +259,7 @@ struct drm_msm_gem_submit_bo { MSM_SUBMIT_SUDO | \ MSM_SUBMIT_SYNCOBJ_IN | \ MSM_SUBMIT_SYNCOBJ_OUT | \ + MSM_SUBMIT_FENCE_SN_IN | \ 0) #define MSM_SUBMIT_SYNCOBJ_RESET 0x00000001 /* Reset syncobj after wait. */ @@ -245,7 +279,7 @@ struct drm_msm_gem_submit_syncobj { */ struct drm_msm_gem_submit { __u32 flags; /* MSM_PIPE_x | MSM_SUBMIT_x */ - __u32 fence; /* out */ + __u32 fence; /* out (or in with MSM_SUBMIT_FENCE_SN_IN flag) */ __u32 nr_bos; /* in, number of submit_bo's */ __u32 nr_cmds; /* in, number of submit_cmd's */ __u64 bos; /* in, ptr to array of submit_bo's */ @@ -261,6 +295,11 @@ struct drm_msm_gem_submit { }; +#define MSM_WAIT_FENCE_BOOST 0x00000001 +#define MSM_WAIT_FENCE_FLAGS ( \ + MSM_WAIT_FENCE_BOOST | \ + 0) + /* The normal way to synchronize with the GPU is just to CPU_PREP on * a buffer if you need to access it from the CPU (other cmdstream * submission from same or other contexts, PAGE_FLIP ioctl, etc, all @@ -270,7 +309,7 @@ struct drm_msm_gem_submit { */ struct drm_msm_wait_fence { __u32 fence; /* in */ - __u32 pad; + __u32 flags; /* in, bitmask of MSM_WAIT_FENCE_x */ struct drm_msm_timespec timeout; /* in */ __u32 queueid; /* in, submitqueue id */ }; @@ -304,6 +343,10 @@ struct drm_msm_gem_madvise { #define MSM_SUBMITQUEUE_FLAGS (0) +/* + * The submitqueue priority should be between 0 and MSM_PARAM_PRIORITIES-1, + * a lower numeric value is higher priority. + */ struct drm_msm_submitqueue { __u32 flags; /* in, MSM_SUBMITQUEUE_x */ __u32 prio; /* in, Priority level */ @@ -321,9 +364,7 @@ struct drm_msm_submitqueue_query { }; #define DRM_MSM_GET_PARAM 0x00 -/* placeholder: #define DRM_MSM_SET_PARAM 0x01 - */ #define DRM_MSM_GEM_NEW 0x02 #define DRM_MSM_GEM_INFO 0x03 #define DRM_MSM_GEM_CPU_PREP 0x04 @@ -339,6 +380,7 @@ struct drm_msm_submitqueue_query { #define DRM_MSM_SUBMITQUEUE_QUERY 0x0C #define DRM_IOCTL_MSM_GET_PARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_GET_PARAM, struct drm_msm_param) +#define DRM_IOCTL_MSM_SET_PARAM DRM_IOW (DRM_COMMAND_BASE + DRM_MSM_SET_PARAM, struct drm_msm_param) #define DRM_IOCTL_MSM_GEM_NEW DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_GEM_NEW, struct drm_msm_gem_new) #define DRM_IOCTL_MSM_GEM_INFO DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_GEM_INFO, struct drm_msm_gem_info) #define DRM_IOCTL_MSM_GEM_CPU_PREP DRM_IOW (DRM_COMMAND_BASE + DRM_MSM_GEM_CPU_PREP, struct drm_msm_gem_cpu_prep) diff --git a/linux-headers/include/drm/nouveau_drm.h b/linux-headers/include/drm/nouveau_drm.h index 853a327433d..0bade1592f3 100644 --- a/linux-headers/include/drm/nouveau_drm.h +++ b/linux-headers/include/drm/nouveau_drm.h @@ -33,11 +33,61 @@ extern "C" { #endif +#define NOUVEAU_GETPARAM_PCI_VENDOR 3 +#define NOUVEAU_GETPARAM_PCI_DEVICE 4 +#define NOUVEAU_GETPARAM_BUS_TYPE 5 +#define NOUVEAU_GETPARAM_FB_SIZE 8 +#define NOUVEAU_GETPARAM_AGP_SIZE 9 +#define NOUVEAU_GETPARAM_CHIPSET_ID 11 +#define NOUVEAU_GETPARAM_VM_VRAM_BASE 12 +#define NOUVEAU_GETPARAM_GRAPH_UNITS 13 +#define NOUVEAU_GETPARAM_PTIMER_TIME 14 +#define NOUVEAU_GETPARAM_HAS_BO_USAGE 15 +#define NOUVEAU_GETPARAM_HAS_PAGEFLIP 16 + +/* + * NOUVEAU_GETPARAM_EXEC_PUSH_MAX - query max pushes through getparam + * + * Query the maximum amount of IBs that can be pushed through a single + * &drm_nouveau_exec structure and hence a single &DRM_IOCTL_NOUVEAU_EXEC + * ioctl(). + */ +#define NOUVEAU_GETPARAM_EXEC_PUSH_MAX 17 + +struct drm_nouveau_getparam { + __u64 param; + __u64 value; +}; + +struct drm_nouveau_channel_alloc { + __u32 fb_ctxdma_handle; + __u32 tt_ctxdma_handle; + + __s32 channel; + __u32 pushbuf_domains; + + /* Notifier memory */ + __u32 notifier_handle; + + /* DRM-enforced subchannel assignments */ + struct { + __u32 handle; + __u32 grclass; + } subchan[8]; + __u32 nr_subchan; +}; + +struct drm_nouveau_channel_free { + __s32 channel; +}; + #define NOUVEAU_GEM_DOMAIN_CPU (1 << 0) #define NOUVEAU_GEM_DOMAIN_VRAM (1 << 1) #define NOUVEAU_GEM_DOMAIN_GART (1 << 2) #define NOUVEAU_GEM_DOMAIN_MAPPABLE (1 << 3) #define NOUVEAU_GEM_DOMAIN_COHERENT (1 << 4) +/* The BO will never be shared via import or export. */ +#define NOUVEAU_GEM_DOMAIN_NO_SHARE (1 << 5) #define NOUVEAU_GEM_TILE_COMP 0x00030000 /* nv50-only */ #define NOUVEAU_GEM_TILE_LAYOUT_MASK 0x0000ff00 @@ -98,6 +148,7 @@ struct drm_nouveau_gem_pushbuf_push { __u32 pad; __u64 offset; __u64 length; +#define NOUVEAU_GEM_PUSHBUF_NO_PREFETCH (1 << 23) }; struct drm_nouveau_gem_pushbuf { @@ -126,16 +177,233 @@ struct drm_nouveau_gem_cpu_fini { __u32 handle; }; -#define DRM_NOUVEAU_GETPARAM 0x00 /* deprecated */ +/** + * struct drm_nouveau_sync - sync object + * + * This structure serves as synchronization mechanism for (potentially) + * asynchronous operations such as EXEC or VM_BIND. + */ +struct drm_nouveau_sync { + /** + * @flags: the flags for a sync object + * + * The first 8 bits are used to determine the type of the sync object. + */ + __u32 flags; +#define DRM_NOUVEAU_SYNC_SYNCOBJ 0x0 +#define DRM_NOUVEAU_SYNC_TIMELINE_SYNCOBJ 0x1 +#define DRM_NOUVEAU_SYNC_TYPE_MASK 0xf + /** + * @handle: the handle of the sync object + */ + __u32 handle; + /** + * @timeline_value: + * + * The timeline point of the sync object in case the syncobj is of + * type DRM_NOUVEAU_SYNC_TIMELINE_SYNCOBJ. + */ + __u64 timeline_value; +}; + +/** + * struct drm_nouveau_vm_init - GPU VA space init structure + * + * Used to initialize the GPU's VA space for a user client, telling the kernel + * which portion of the VA space is managed by the UMD and kernel respectively. + * + * For the UMD to use the VM_BIND uAPI, this must be called before any BOs or + * channels are created; if called afterwards DRM_IOCTL_NOUVEAU_VM_INIT fails + * with -ENOSYS. + */ +struct drm_nouveau_vm_init { + /** + * @kernel_managed_addr: start address of the kernel managed VA space + * region + */ + __u64 kernel_managed_addr; + /** + * @kernel_managed_size: size of the kernel managed VA space region in + * bytes + */ + __u64 kernel_managed_size; +}; + +/** + * struct drm_nouveau_vm_bind_op - VM_BIND operation + * + * This structure represents a single VM_BIND operation. UMDs should pass + * an array of this structure via struct drm_nouveau_vm_bind's &op_ptr field. + */ +struct drm_nouveau_vm_bind_op { + /** + * @op: the operation type + */ + __u32 op; +/** + * @DRM_NOUVEAU_VM_BIND_OP_MAP: + * + * Map a GEM object to the GPU's VA space. Optionally, the + * &DRM_NOUVEAU_VM_BIND_SPARSE flag can be passed to instruct the kernel to + * create sparse mappings for the given range. + */ +#define DRM_NOUVEAU_VM_BIND_OP_MAP 0x0 +/** + * @DRM_NOUVEAU_VM_BIND_OP_UNMAP: + * + * Unmap an existing mapping in the GPU's VA space. If the region the mapping + * is located in is a sparse region, new sparse mappings are created where the + * unmapped (memory backed) mapping was mapped previously. To remove a sparse + * region the &DRM_NOUVEAU_VM_BIND_SPARSE must be set. + */ +#define DRM_NOUVEAU_VM_BIND_OP_UNMAP 0x1 + /** + * @flags: the flags for a &drm_nouveau_vm_bind_op + */ + __u32 flags; +/** + * @DRM_NOUVEAU_VM_BIND_SPARSE: + * + * Indicates that an allocated VA space region should be sparse. + */ +#define DRM_NOUVEAU_VM_BIND_SPARSE (1 << 8) + /** + * @handle: the handle of the DRM GEM object to map + */ + __u32 handle; + /** + * @pad: 32 bit padding, should be 0 + */ + __u32 pad; + /** + * @addr: + * + * the address the VA space region or (memory backed) mapping should be mapped to + */ + __u64 addr; + /** + * @bo_offset: the offset within the BO backing the mapping + */ + __u64 bo_offset; + /** + * @range: the size of the requested mapping in bytes + */ + __u64 range; +}; + +/** + * struct drm_nouveau_vm_bind - structure for DRM_IOCTL_NOUVEAU_VM_BIND + */ +struct drm_nouveau_vm_bind { + /** + * @op_count: the number of &drm_nouveau_vm_bind_op + */ + __u32 op_count; + /** + * @flags: the flags for a &drm_nouveau_vm_bind ioctl + */ + __u32 flags; +/** + * @DRM_NOUVEAU_VM_BIND_RUN_ASYNC: + * + * Indicates that the given VM_BIND operation should be executed asynchronously + * by the kernel. + * + * If this flag is not supplied the kernel executes the associated operations + * synchronously and doesn't accept any &drm_nouveau_sync objects. + */ +#define DRM_NOUVEAU_VM_BIND_RUN_ASYNC 0x1 + /** + * @wait_count: the number of wait &drm_nouveau_syncs + */ + __u32 wait_count; + /** + * @sig_count: the number of &drm_nouveau_syncs to signal when finished + */ + __u32 sig_count; + /** + * @wait_ptr: pointer to &drm_nouveau_syncs to wait for + */ + __u64 wait_ptr; + /** + * @sig_ptr: pointer to &drm_nouveau_syncs to signal when finished + */ + __u64 sig_ptr; + /** + * @op_ptr: pointer to the &drm_nouveau_vm_bind_ops to execute + */ + __u64 op_ptr; +}; + +/** + * struct drm_nouveau_exec_push - EXEC push operation + * + * This structure represents a single EXEC push operation. UMDs should pass an + * array of this structure via struct drm_nouveau_exec's &push_ptr field. + */ +struct drm_nouveau_exec_push { + /** + * @va: the virtual address of the push buffer mapping + */ + __u64 va; + /** + * @va_len: the length of the push buffer mapping + */ + __u32 va_len; + /** + * @flags: the flags for this push buffer mapping + */ + __u32 flags; +#define DRM_NOUVEAU_EXEC_PUSH_NO_PREFETCH 0x1 +}; + +/** + * struct drm_nouveau_exec - structure for DRM_IOCTL_NOUVEAU_EXEC + */ +struct drm_nouveau_exec { + /** + * @channel: the channel to execute the push buffer in + */ + __u32 channel; + /** + * @push_count: the number of &drm_nouveau_exec_push ops + */ + __u32 push_count; + /** + * @wait_count: the number of wait &drm_nouveau_syncs + */ + __u32 wait_count; + /** + * @sig_count: the number of &drm_nouveau_syncs to signal when finished + */ + __u32 sig_count; + /** + * @wait_ptr: pointer to &drm_nouveau_syncs to wait for + */ + __u64 wait_ptr; + /** + * @sig_ptr: pointer to &drm_nouveau_syncs to signal when finished + */ + __u64 sig_ptr; + /** + * @push_ptr: pointer to &drm_nouveau_exec_push ops + */ + __u64 push_ptr; +}; + +#define DRM_NOUVEAU_GETPARAM 0x00 #define DRM_NOUVEAU_SETPARAM 0x01 /* deprecated */ -#define DRM_NOUVEAU_CHANNEL_ALLOC 0x02 /* deprecated */ -#define DRM_NOUVEAU_CHANNEL_FREE 0x03 /* deprecated */ +#define DRM_NOUVEAU_CHANNEL_ALLOC 0x02 +#define DRM_NOUVEAU_CHANNEL_FREE 0x03 #define DRM_NOUVEAU_GROBJ_ALLOC 0x04 /* deprecated */ #define DRM_NOUVEAU_NOTIFIEROBJ_ALLOC 0x05 /* deprecated */ #define DRM_NOUVEAU_GPUOBJ_FREE 0x06 /* deprecated */ #define DRM_NOUVEAU_NVIF 0x07 #define DRM_NOUVEAU_SVM_INIT 0x08 #define DRM_NOUVEAU_SVM_BIND 0x09 +#define DRM_NOUVEAU_VM_INIT 0x10 +#define DRM_NOUVEAU_VM_BIND 0x11 +#define DRM_NOUVEAU_EXEC 0x12 #define DRM_NOUVEAU_GEM_NEW 0x40 #define DRM_NOUVEAU_GEM_PUSHBUF 0x41 #define DRM_NOUVEAU_GEM_CPU_PREP 0x42 @@ -188,6 +456,10 @@ struct drm_nouveau_svm_bind { #define NOUVEAU_SVM_BIND_TARGET__GPU_VRAM (1UL << 31) +#define DRM_IOCTL_NOUVEAU_GETPARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_NOUVEAU_GETPARAM, struct drm_nouveau_getparam) +#define DRM_IOCTL_NOUVEAU_CHANNEL_ALLOC DRM_IOWR(DRM_COMMAND_BASE + DRM_NOUVEAU_CHANNEL_ALLOC, struct drm_nouveau_channel_alloc) +#define DRM_IOCTL_NOUVEAU_CHANNEL_FREE DRM_IOW (DRM_COMMAND_BASE + DRM_NOUVEAU_CHANNEL_FREE, struct drm_nouveau_channel_free) + #define DRM_IOCTL_NOUVEAU_SVM_INIT DRM_IOWR(DRM_COMMAND_BASE + DRM_NOUVEAU_SVM_INIT, struct drm_nouveau_svm_init) #define DRM_IOCTL_NOUVEAU_SVM_BIND DRM_IOWR(DRM_COMMAND_BASE + DRM_NOUVEAU_SVM_BIND, struct drm_nouveau_svm_bind) @@ -197,6 +469,9 @@ struct drm_nouveau_svm_bind { #define DRM_IOCTL_NOUVEAU_GEM_CPU_FINI DRM_IOW (DRM_COMMAND_BASE + DRM_NOUVEAU_GEM_CPU_FINI, struct drm_nouveau_gem_cpu_fini) #define DRM_IOCTL_NOUVEAU_GEM_INFO DRM_IOWR(DRM_COMMAND_BASE + DRM_NOUVEAU_GEM_INFO, struct drm_nouveau_gem_info) +#define DRM_IOCTL_NOUVEAU_VM_INIT DRM_IOWR(DRM_COMMAND_BASE + DRM_NOUVEAU_VM_INIT, struct drm_nouveau_vm_init) +#define DRM_IOCTL_NOUVEAU_VM_BIND DRM_IOWR(DRM_COMMAND_BASE + DRM_NOUVEAU_VM_BIND, struct drm_nouveau_vm_bind) +#define DRM_IOCTL_NOUVEAU_EXEC DRM_IOWR(DRM_COMMAND_BASE + DRM_NOUVEAU_EXEC, struct drm_nouveau_exec) #if defined(__cplusplus) } #endif diff --git a/linux-headers/include/drm/panfrost_drm.h b/linux-headers/include/drm/panfrost_drm.h index ec19db1eead..9f231d40a14 100644 --- a/linux-headers/include/drm/panfrost_drm.h +++ b/linux-headers/include/drm/panfrost_drm.h @@ -84,14 +84,14 @@ struct drm_panfrost_wait_bo { __s64 timeout_ns; /* absolute */ }; +/* Valid flags to pass to drm_panfrost_create_bo */ #define PANFROST_BO_NOEXEC 1 #define PANFROST_BO_HEAP 2 /** * struct drm_panfrost_create_bo - ioctl argument for creating Panfrost BOs. * - * There are currently no values for the flags argument, but it may be - * used in a future extension. + * The flags argument is a bit mask of PANFROST_BO_* flags. */ struct drm_panfrost_create_bo { __u32 size; @@ -171,6 +171,7 @@ enum drm_panfrost_param { DRM_PANFROST_PARAM_JS_FEATURES15, DRM_PANFROST_PARAM_NR_CORE_GROUPS, DRM_PANFROST_PARAM_THREAD_TLS_ALLOC, + DRM_PANFROST_PARAM_AFBC_FEATURES, }; struct drm_panfrost_get_param { @@ -223,6 +224,57 @@ struct drm_panfrost_madvise { __u32 retained; /* out, whether backing store still exists */ }; +/* Definitions for coredump decoding in user space */ +#define PANFROSTDUMP_MAJOR 1 +#define PANFROSTDUMP_MINOR 0 + +#define PANFROSTDUMP_MAGIC 0x464E4150 /* PANF */ + +#define PANFROSTDUMP_BUF_REG 0 +#define PANFROSTDUMP_BUF_BOMAP (PANFROSTDUMP_BUF_REG + 1) +#define PANFROSTDUMP_BUF_BO (PANFROSTDUMP_BUF_BOMAP + 1) +#define PANFROSTDUMP_BUF_TRAILER (PANFROSTDUMP_BUF_BO + 1) + +/* + * This structure is the native endianness of the dumping machine, tools can + * detect the endianness by looking at the value in 'magic'. + */ +struct panfrost_dump_object_header { + __u32 magic; + __u32 type; + __u32 file_size; + __u32 file_offset; + + union { + struct { + __u64 jc; + __u32 gpu_id; + __u32 major; + __u32 minor; + __u64 nbos; + } reghdr; + + struct { + __u32 valid; + __u64 iova; + __u32 data[2]; + } bomap; + + /* + * Force same size in case we want to expand the header + * with new fields and also keep it 512-byte aligned + */ + + __u32 sizer[496]; + }; +}; + +/* Registers object, an array of these */ +struct panfrost_dump_registers { + __u32 reg; + __u32 value; +}; + #if defined(__cplusplus) } #endif diff --git a/linux-headers/include/drm/qaic_accel.h b/linux-headers/include/drm/qaic_accel.h new file mode 100644 index 00000000000..2d348744a85 --- /dev/null +++ b/linux-headers/include/drm/qaic_accel.h @@ -0,0 +1,397 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note + * + * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved. + * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#ifndef QAIC_ACCEL_H_ +#define QAIC_ACCEL_H_ + +#include "drm.h" + +#if defined(__cplusplus) +extern "C" { +#endif + +/* The length(4K) includes len and count fields of qaic_manage_msg */ +#define QAIC_MANAGE_MAX_MSG_LENGTH SZ_4K + +/* semaphore flags */ +#define QAIC_SEM_INSYNCFENCE 2 +#define QAIC_SEM_OUTSYNCFENCE 1 + +/* Semaphore commands */ +#define QAIC_SEM_NOP 0 +#define QAIC_SEM_INIT 1 +#define QAIC_SEM_INC 2 +#define QAIC_SEM_DEC 3 +#define QAIC_SEM_WAIT_EQUAL 4 +#define QAIC_SEM_WAIT_GT_EQ 5 /* Greater than or equal */ +#define QAIC_SEM_WAIT_GT_0 6 /* Greater than 0 */ + +#define QAIC_TRANS_UNDEFINED 0 +#define QAIC_TRANS_PASSTHROUGH_FROM_USR 1 +#define QAIC_TRANS_PASSTHROUGH_TO_USR 2 +#define QAIC_TRANS_PASSTHROUGH_FROM_DEV 3 +#define QAIC_TRANS_PASSTHROUGH_TO_DEV 4 +#define QAIC_TRANS_DMA_XFER_FROM_USR 5 +#define QAIC_TRANS_DMA_XFER_TO_DEV 6 +#define QAIC_TRANS_ACTIVATE_FROM_USR 7 +#define QAIC_TRANS_ACTIVATE_FROM_DEV 8 +#define QAIC_TRANS_ACTIVATE_TO_DEV 9 +#define QAIC_TRANS_DEACTIVATE_FROM_USR 10 +#define QAIC_TRANS_DEACTIVATE_FROM_DEV 11 +#define QAIC_TRANS_STATUS_FROM_USR 12 +#define QAIC_TRANS_STATUS_TO_USR 13 +#define QAIC_TRANS_STATUS_FROM_DEV 14 +#define QAIC_TRANS_STATUS_TO_DEV 15 +#define QAIC_TRANS_TERMINATE_FROM_DEV 16 +#define QAIC_TRANS_TERMINATE_TO_DEV 17 +#define QAIC_TRANS_DMA_XFER_CONT 18 +#define QAIC_TRANS_VALIDATE_PARTITION_FROM_DEV 19 +#define QAIC_TRANS_VALIDATE_PARTITION_TO_DEV 20 + +/** + * struct qaic_manage_trans_hdr - Header for a transaction in a manage message. + * @type: In. Identifies this transaction. See QAIC_TRANS_* defines. + * @len: In. Length of this transaction, including this header. + */ +struct qaic_manage_trans_hdr { + __u32 type; + __u32 len; +}; + +/** + * struct qaic_manage_trans_passthrough - Defines a passthrough transaction. + * @hdr: In. Header to identify this transaction. + * @data: In. Payload of this ransaction. Opaque to the driver. Userspace must + * encode in little endian and align/pad to 64-bit. + */ +struct qaic_manage_trans_passthrough { + struct qaic_manage_trans_hdr hdr; + __u8 data[]; +}; + +/** + * struct qaic_manage_trans_dma_xfer - Defines a DMA transfer transaction. + * @hdr: In. Header to identify this transaction. + * @tag: In. Identified this transfer in other transactions. Opaque to the + * driver. + * @pad: Structure padding. + * @addr: In. Address of the data to DMA to the device. + * @size: In. Length of the data to DMA to the device. + */ +struct qaic_manage_trans_dma_xfer { + struct qaic_manage_trans_hdr hdr; + __u32 tag; + __u32 pad; + __u64 addr; + __u64 size; +}; + +/** + * struct qaic_manage_trans_activate_to_dev - Defines an activate request. + * @hdr: In. Header to identify this transaction. + * @queue_size: In. Number of elements for DBC request and response queues. + * @eventfd: Unused. + * @options: In. Device specific options for this activate. + * @pad: Structure padding. Must be 0. + */ +struct qaic_manage_trans_activate_to_dev { + struct qaic_manage_trans_hdr hdr; + __u32 queue_size; + __u32 eventfd; + __u32 options; + __u32 pad; +}; + +/** + * struct qaic_manage_trans_activate_from_dev - Defines an activate response. + * @hdr: Out. Header to identify this transaction. + * @status: Out. Return code of the request from the device. + * @dbc_id: Out. Id of the assigned DBC for successful request. + * @options: Out. Device specific options for this activate. + */ +struct qaic_manage_trans_activate_from_dev { + struct qaic_manage_trans_hdr hdr; + __u32 status; + __u32 dbc_id; + __u64 options; +}; + +/** + * struct qaic_manage_trans_deactivate - Defines a deactivate request. + * @hdr: In. Header to identify this transaction. + * @dbc_id: In. Id of assigned DBC. + * @pad: Structure padding. Must be 0. + */ +struct qaic_manage_trans_deactivate { + struct qaic_manage_trans_hdr hdr; + __u32 dbc_id; + __u32 pad; +}; + +/** + * struct qaic_manage_trans_status_to_dev - Defines a status request. + * @hdr: In. Header to identify this transaction. + */ +struct qaic_manage_trans_status_to_dev { + struct qaic_manage_trans_hdr hdr; +}; + +/** + * struct qaic_manage_trans_status_from_dev - Defines a status response. + * @hdr: Out. Header to identify this transaction. + * @major: Out. NNC protocol version major number. + * @minor: Out. NNC protocol version minor number. + * @status: Out. Return code from device. + * @status_flags: Out. Flags from device. Bit 0 indicates if CRCs are required. + */ +struct qaic_manage_trans_status_from_dev { + struct qaic_manage_trans_hdr hdr; + __u16 major; + __u16 minor; + __u32 status; + __u64 status_flags; +}; + +/** + * struct qaic_manage_msg - Defines a message to the device. + * @len: In. Length of all the transactions contained within this message. + * @count: In. Number of transactions in this message. + * @data: In. Address to an array where the transactions can be found. + */ +struct qaic_manage_msg { + __u32 len; + __u32 count; + __u64 data; +}; + +/** + * struct qaic_create_bo - Defines a request to create a buffer object. + * @size: In. Size of the buffer in bytes. + * @handle: Out. GEM handle for the BO. + * @pad: Structure padding. Must be 0. + */ +struct qaic_create_bo { + __u64 size; + __u32 handle; + __u32 pad; +}; + +/** + * struct qaic_mmap_bo - Defines a request to prepare a BO for mmap(). + * @handle: In. Handle of the GEM BO to prepare for mmap(). + * @pad: Structure padding. Must be 0. + * @offset: Out. Offset value to provide to mmap(). + */ +struct qaic_mmap_bo { + __u32 handle; + __u32 pad; + __u64 offset; +}; + +/** + * struct qaic_sem - Defines a semaphore command for a BO slice. + * @val: In. Only lower 12 bits are valid. + * @index: In. Only lower 5 bits are valid. + * @presync: In. 1 if presync operation, 0 if postsync. + * @cmd: In. One of QAIC_SEM_*. + * @flags: In. Bitfield. See QAIC_SEM_INSYNCFENCE and QAIC_SEM_OUTSYNCFENCE + * @pad: Structure padding. Must be 0. + */ +struct qaic_sem { + __u16 val; + __u8 index; + __u8 presync; + __u8 cmd; + __u8 flags; + __u16 pad; +}; + +/** + * struct qaic_attach_slice_entry - Defines a single BO slice. + * @size: In. Size of this slice in bytes. + * @sem0: In. Semaphore command 0. Must be 0 is not valid. + * @sem1: In. Semaphore command 1. Must be 0 is not valid. + * @sem2: In. Semaphore command 2. Must be 0 is not valid. + * @sem3: In. Semaphore command 3. Must be 0 is not valid. + * @dev_addr: In. Device address this slice pushes to or pulls from. + * @db_addr: In. Address of the doorbell to ring. + * @db_data: In. Data to write to the doorbell. + * @db_len: In. Size of the doorbell data in bits - 32, 16, or 8. 0 is for + * inactive doorbells. + * @offset: In. Start of this slice as an offset from the start of the BO. + */ +struct qaic_attach_slice_entry { + __u64 size; + struct qaic_sem sem0; + struct qaic_sem sem1; + struct qaic_sem sem2; + struct qaic_sem sem3; + __u64 dev_addr; + __u64 db_addr; + __u32 db_data; + __u32 db_len; + __u64 offset; +}; + +/** + * struct qaic_attach_slice_hdr - Defines metadata for a set of BO slices. + * @count: In. Number of slices for this BO. + * @dbc_id: In. Associate the sliced BO with this DBC. + * @handle: In. GEM handle of the BO to slice. + * @dir: In. Direction of data flow. 1 = DMA_TO_DEVICE, 2 = DMA_FROM_DEVICE + * @size: In. Total length of the BO. + * If BO is imported (DMABUF/PRIME) then this size + * should not exceed the size of DMABUF provided. + * If BO is allocated using DRM_IOCTL_QAIC_CREATE_BO + * then this size should be exactly same as the size + * provided during DRM_IOCTL_QAIC_CREATE_BO. + * @dev_addr: In. Device address this slice pushes to or pulls from. + * @db_addr: In. Address of the doorbell to ring. + * @db_data: In. Data to write to the doorbell. + * @db_len: In. Size of the doorbell data in bits - 32, 16, or 8. 0 is for + * inactive doorbells. + * @offset: In. Start of this slice as an offset from the start of the BO. + */ +struct qaic_attach_slice_hdr { + __u32 count; + __u32 dbc_id; + __u32 handle; + __u32 dir; + __u64 size; +}; + +/** + * struct qaic_attach_slice - Defines a set of BO slices. + * @hdr: In. Metadata of the set of slices. + * @data: In. Pointer to an array containing the slice definitions. + */ +struct qaic_attach_slice { + struct qaic_attach_slice_hdr hdr; + __u64 data; +}; + +/** + * struct qaic_execute_entry - Defines a BO to submit to the device. + * @handle: In. GEM handle of the BO to commit to the device. + * @dir: In. Direction of data. 1 = to device, 2 = from device. + */ +struct qaic_execute_entry { + __u32 handle; + __u32 dir; +}; + +/** + * struct qaic_partial_execute_entry - Defines a BO to resize and submit. + * @handle: In. GEM handle of the BO to commit to the device. + * @dir: In. Direction of data. 1 = to device, 2 = from device. + * @resize: In. New size of the BO. Must be <= the original BO size. 0 is + * short for no resize. + */ +struct qaic_partial_execute_entry { + __u32 handle; + __u32 dir; + __u64 resize; +}; + +/** + * struct qaic_execute_hdr - Defines metadata for BO submission. + * @count: In. Number of BOs to submit. + * @dbc_id: In. DBC to submit the BOs on. + */ +struct qaic_execute_hdr { + __u32 count; + __u32 dbc_id; +}; + +/** + * struct qaic_execute - Defines a list of BOs to submit to the device. + * @hdr: In. BO list metadata. + * @data: In. Pointer to an array of BOs to submit. + */ +struct qaic_execute { + struct qaic_execute_hdr hdr; + __u64 data; +}; + +/** + * struct qaic_wait - Defines a blocking wait for BO execution. + * @handle: In. GEM handle of the BO to wait on. + * @timeout: In. Maximum time in ms to wait for the BO. + * @dbc_id: In. DBC the BO is submitted to. + * @pad: Structure padding. Must be 0. + */ +struct qaic_wait { + __u32 handle; + __u32 timeout; + __u32 dbc_id; + __u32 pad; +}; + +/** + * struct qaic_perf_stats_hdr - Defines metadata for getting BO perf info. + * @count: In. Number of BOs requested. + * @pad: Structure padding. Must be 0. + * @dbc_id: In. DBC the BO are associated with. + */ +struct qaic_perf_stats_hdr { + __u16 count; + __u16 pad; + __u32 dbc_id; +}; + +/** + * struct qaic_perf_stats - Defines a request for getting BO perf info. + * @hdr: In. Request metadata + * @data: In. Pointer to array of stats structures that will receive the data. + */ +struct qaic_perf_stats { + struct qaic_perf_stats_hdr hdr; + __u64 data; +}; + +/** + * struct qaic_perf_stats_entry - Defines a BO perf info. + * @handle: In. GEM handle of the BO to get perf stats for. + * @queue_level_before: Out. Number of elements in the queue before this BO + * was submitted. + * @num_queue_element: Out. Number of elements added to the queue to submit + * this BO. + * @submit_latency_us: Out. Time taken by the driver to submit this BO. + * @device_latency_us: Out. Time taken by the device to execute this BO. + * @pad: Structure padding. Must be 0. + */ +struct qaic_perf_stats_entry { + __u32 handle; + __u32 queue_level_before; + __u32 num_queue_element; + __u32 submit_latency_us; + __u32 device_latency_us; + __u32 pad; +}; + +#define DRM_QAIC_MANAGE 0x00 +#define DRM_QAIC_CREATE_BO 0x01 +#define DRM_QAIC_MMAP_BO 0x02 +#define DRM_QAIC_ATTACH_SLICE_BO 0x03 +#define DRM_QAIC_EXECUTE_BO 0x04 +#define DRM_QAIC_PARTIAL_EXECUTE_BO 0x05 +#define DRM_QAIC_WAIT_BO 0x06 +#define DRM_QAIC_PERF_STATS_BO 0x07 + +#define DRM_IOCTL_QAIC_MANAGE DRM_IOWR(DRM_COMMAND_BASE + DRM_QAIC_MANAGE, struct qaic_manage_msg) +#define DRM_IOCTL_QAIC_CREATE_BO DRM_IOWR(DRM_COMMAND_BASE + DRM_QAIC_CREATE_BO, struct qaic_create_bo) +#define DRM_IOCTL_QAIC_MMAP_BO DRM_IOWR(DRM_COMMAND_BASE + DRM_QAIC_MMAP_BO, struct qaic_mmap_bo) +#define DRM_IOCTL_QAIC_ATTACH_SLICE_BO DRM_IOW(DRM_COMMAND_BASE + DRM_QAIC_ATTACH_SLICE_BO, struct qaic_attach_slice) +#define DRM_IOCTL_QAIC_EXECUTE_BO DRM_IOW(DRM_COMMAND_BASE + DRM_QAIC_EXECUTE_BO, struct qaic_execute) +#define DRM_IOCTL_QAIC_PARTIAL_EXECUTE_BO DRM_IOW(DRM_COMMAND_BASE + DRM_QAIC_PARTIAL_EXECUTE_BO, struct qaic_execute) +#define DRM_IOCTL_QAIC_WAIT_BO DRM_IOW(DRM_COMMAND_BASE + DRM_QAIC_WAIT_BO, struct qaic_wait) +#define DRM_IOCTL_QAIC_PERF_STATS_BO DRM_IOWR(DRM_COMMAND_BASE + DRM_QAIC_PERF_STATS_BO, struct qaic_perf_stats) + +#if defined(__cplusplus) +} +#endif + +#endif /* QAIC_ACCEL_H_ */ diff --git a/linux-headers/include/drm/r128_drm.h b/linux-headers/include/drm/r128_drm.h deleted file mode 100644 index bf431a02333..00000000000 --- a/linux-headers/include/drm/r128_drm.h +++ /dev/null @@ -1,336 +0,0 @@ -/* r128_drm.h -- Public header for the r128 driver -*- linux-c -*- - * Created: Wed Apr 5 19:24:19 2000 by kevin@precisioninsight.com - */ -/* - * Copyright 2000 Precision Insight, Inc., Cedar Park, Texas. - * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California. - * All rights reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Gareth Hughes - * Kevin E. Martin - */ - -#ifndef __R128_DRM_H__ -#define __R128_DRM_H__ - -#include "drm.h" - -#if defined(__cplusplus) -extern "C" { -#endif - -/* WARNING: If you change any of these defines, make sure to change the - * defines in the X server file (r128_sarea.h) - */ -#ifndef __R128_SAREA_DEFINES__ -#define __R128_SAREA_DEFINES__ - -/* What needs to be changed for the current vertex buffer? - */ -#define R128_UPLOAD_CONTEXT 0x001 -#define R128_UPLOAD_SETUP 0x002 -#define R128_UPLOAD_TEX0 0x004 -#define R128_UPLOAD_TEX1 0x008 -#define R128_UPLOAD_TEX0IMAGES 0x010 -#define R128_UPLOAD_TEX1IMAGES 0x020 -#define R128_UPLOAD_CORE 0x040 -#define R128_UPLOAD_MASKS 0x080 -#define R128_UPLOAD_WINDOW 0x100 -#define R128_UPLOAD_CLIPRECTS 0x200 /* handled client-side */ -#define R128_REQUIRE_QUIESCENCE 0x400 -#define R128_UPLOAD_ALL 0x7ff - -#define R128_FRONT 0x1 -#define R128_BACK 0x2 -#define R128_DEPTH 0x4 - -/* Primitive types - */ -#define R128_POINTS 0x1 -#define R128_LINES 0x2 -#define R128_LINE_STRIP 0x3 -#define R128_TRIANGLES 0x4 -#define R128_TRIANGLE_FAN 0x5 -#define R128_TRIANGLE_STRIP 0x6 - -/* Vertex/indirect buffer size - */ -#define R128_BUFFER_SIZE 16384 - -/* Byte offsets for indirect buffer data - */ -#define R128_INDEX_PRIM_OFFSET 20 -#define R128_HOSTDATA_BLIT_OFFSET 32 - -/* Keep these small for testing. - */ -#define R128_NR_SAREA_CLIPRECTS 12 - -/* There are 2 heaps (local/AGP). Each region within a heap is a - * minimum of 64k, and there are at most 64 of them per heap. - */ -#define R128_LOCAL_TEX_HEAP 0 -#define R128_AGP_TEX_HEAP 1 -#define R128_NR_TEX_HEAPS 2 -#define R128_NR_TEX_REGIONS 64 -#define R128_LOG_TEX_GRANULARITY 16 - -#define R128_NR_CONTEXT_REGS 12 - -#define R128_MAX_TEXTURE_LEVELS 11 -#define R128_MAX_TEXTURE_UNITS 2 - -#endif /* __R128_SAREA_DEFINES__ */ - -typedef struct { - /* Context state - can be written in one large chunk */ - unsigned int dst_pitch_offset_c; - unsigned int dp_gui_master_cntl_c; - unsigned int sc_top_left_c; - unsigned int sc_bottom_right_c; - unsigned int z_offset_c; - unsigned int z_pitch_c; - unsigned int z_sten_cntl_c; - unsigned int tex_cntl_c; - unsigned int misc_3d_state_cntl_reg; - unsigned int texture_clr_cmp_clr_c; - unsigned int texture_clr_cmp_msk_c; - unsigned int fog_color_c; - - /* Texture state */ - unsigned int tex_size_pitch_c; - unsigned int constant_color_c; - - /* Setup state */ - unsigned int pm4_vc_fpu_setup; - unsigned int setup_cntl; - - /* Mask state */ - unsigned int dp_write_mask; - unsigned int sten_ref_mask_c; - unsigned int plane_3d_mask_c; - - /* Window state */ - unsigned int window_xy_offset; - - /* Core state */ - unsigned int scale_3d_cntl; -} drm_r128_context_regs_t; - -/* Setup registers for each texture unit - */ -typedef struct { - unsigned int tex_cntl; - unsigned int tex_combine_cntl; - unsigned int tex_size_pitch; - unsigned int tex_offset[R128_MAX_TEXTURE_LEVELS]; - unsigned int tex_border_color; -} drm_r128_texture_regs_t; - -typedef struct drm_r128_sarea { - /* The channel for communication of state information to the kernel - * on firing a vertex buffer. - */ - drm_r128_context_regs_t context_state; - drm_r128_texture_regs_t tex_state[R128_MAX_TEXTURE_UNITS]; - unsigned int dirty; - unsigned int vertsize; - unsigned int vc_format; - - /* The current cliprects, or a subset thereof. - */ - struct drm_clip_rect boxes[R128_NR_SAREA_CLIPRECTS]; - unsigned int nbox; - - /* Counters for client-side throttling of rendering clients. - */ - unsigned int last_frame; - unsigned int last_dispatch; - - struct drm_tex_region tex_list[R128_NR_TEX_HEAPS][R128_NR_TEX_REGIONS + 1]; - unsigned int tex_age[R128_NR_TEX_HEAPS]; - int ctx_owner; - int pfAllowPageFlip; /* number of 3d windows (0,1,2 or more) */ - int pfCurrentPage; /* which buffer is being displayed? */ -} drm_r128_sarea_t; - -/* WARNING: If you change any of these defines, make sure to change the - * defines in the Xserver file (xf86drmR128.h) - */ - -/* Rage 128 specific ioctls - * The device specific ioctl range is 0x40 to 0x79. - */ -#define DRM_R128_INIT 0x00 -#define DRM_R128_CCE_START 0x01 -#define DRM_R128_CCE_STOP 0x02 -#define DRM_R128_CCE_RESET 0x03 -#define DRM_R128_CCE_IDLE 0x04 -/* 0x05 not used */ -#define DRM_R128_RESET 0x06 -#define DRM_R128_SWAP 0x07 -#define DRM_R128_CLEAR 0x08 -#define DRM_R128_VERTEX 0x09 -#define DRM_R128_INDICES 0x0a -#define DRM_R128_BLIT 0x0b -#define DRM_R128_DEPTH 0x0c -#define DRM_R128_STIPPLE 0x0d -/* 0x0e not used */ -#define DRM_R128_INDIRECT 0x0f -#define DRM_R128_FULLSCREEN 0x10 -#define DRM_R128_CLEAR2 0x11 -#define DRM_R128_GETPARAM 0x12 -#define DRM_R128_FLIP 0x13 - -#define DRM_IOCTL_R128_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_R128_INIT, drm_r128_init_t) -#define DRM_IOCTL_R128_CCE_START DRM_IO( DRM_COMMAND_BASE + DRM_R128_CCE_START) -#define DRM_IOCTL_R128_CCE_STOP DRM_IOW( DRM_COMMAND_BASE + DRM_R128_CCE_STOP, drm_r128_cce_stop_t) -#define DRM_IOCTL_R128_CCE_RESET DRM_IO( DRM_COMMAND_BASE + DRM_R128_CCE_RESET) -#define DRM_IOCTL_R128_CCE_IDLE DRM_IO( DRM_COMMAND_BASE + DRM_R128_CCE_IDLE) -/* 0x05 not used */ -#define DRM_IOCTL_R128_RESET DRM_IO( DRM_COMMAND_BASE + DRM_R128_RESET) -#define DRM_IOCTL_R128_SWAP DRM_IO( DRM_COMMAND_BASE + DRM_R128_SWAP) -#define DRM_IOCTL_R128_CLEAR DRM_IOW( DRM_COMMAND_BASE + DRM_R128_CLEAR, drm_r128_clear_t) -#define DRM_IOCTL_R128_VERTEX DRM_IOW( DRM_COMMAND_BASE + DRM_R128_VERTEX, drm_r128_vertex_t) -#define DRM_IOCTL_R128_INDICES DRM_IOW( DRM_COMMAND_BASE + DRM_R128_INDICES, drm_r128_indices_t) -#define DRM_IOCTL_R128_BLIT DRM_IOW( DRM_COMMAND_BASE + DRM_R128_BLIT, drm_r128_blit_t) -#define DRM_IOCTL_R128_DEPTH DRM_IOW( DRM_COMMAND_BASE + DRM_R128_DEPTH, drm_r128_depth_t) -#define DRM_IOCTL_R128_STIPPLE DRM_IOW( DRM_COMMAND_BASE + DRM_R128_STIPPLE, drm_r128_stipple_t) -/* 0x0e not used */ -#define DRM_IOCTL_R128_INDIRECT DRM_IOWR(DRM_COMMAND_BASE + DRM_R128_INDIRECT, drm_r128_indirect_t) -#define DRM_IOCTL_R128_FULLSCREEN DRM_IOW( DRM_COMMAND_BASE + DRM_R128_FULLSCREEN, drm_r128_fullscreen_t) -#define DRM_IOCTL_R128_CLEAR2 DRM_IOW( DRM_COMMAND_BASE + DRM_R128_CLEAR2, drm_r128_clear2_t) -#define DRM_IOCTL_R128_GETPARAM DRM_IOWR( DRM_COMMAND_BASE + DRM_R128_GETPARAM, drm_r128_getparam_t) -#define DRM_IOCTL_R128_FLIP DRM_IO( DRM_COMMAND_BASE + DRM_R128_FLIP) - -typedef struct drm_r128_init { - enum { - R128_INIT_CCE = 0x01, - R128_CLEANUP_CCE = 0x02 - } func; - unsigned long sarea_priv_offset; - int is_pci; - int cce_mode; - int cce_secure; - int ring_size; - int usec_timeout; - - unsigned int fb_bpp; - unsigned int front_offset, front_pitch; - unsigned int back_offset, back_pitch; - unsigned int depth_bpp; - unsigned int depth_offset, depth_pitch; - unsigned int span_offset; - - unsigned long fb_offset; - unsigned long mmio_offset; - unsigned long ring_offset; - unsigned long ring_rptr_offset; - unsigned long buffers_offset; - unsigned long agp_textures_offset; -} drm_r128_init_t; - -typedef struct drm_r128_cce_stop { - int flush; - int idle; -} drm_r128_cce_stop_t; - -typedef struct drm_r128_clear { - unsigned int flags; - unsigned int clear_color; - unsigned int clear_depth; - unsigned int color_mask; - unsigned int depth_mask; -} drm_r128_clear_t; - -typedef struct drm_r128_vertex { - int prim; - int idx; /* Index of vertex buffer */ - int count; /* Number of vertices in buffer */ - int discard; /* Client finished with buffer? */ -} drm_r128_vertex_t; - -typedef struct drm_r128_indices { - int prim; - int idx; - int start; - int end; - int discard; /* Client finished with buffer? */ -} drm_r128_indices_t; - -typedef struct drm_r128_blit { - int idx; - int pitch; - int offset; - int format; - unsigned short x, y; - unsigned short width, height; -} drm_r128_blit_t; - -typedef struct drm_r128_depth { - enum { - R128_WRITE_SPAN = 0x01, - R128_WRITE_PIXELS = 0x02, - R128_READ_SPAN = 0x03, - R128_READ_PIXELS = 0x04 - } func; - int n; - int *x; - int *y; - unsigned int *buffer; - unsigned char *mask; -} drm_r128_depth_t; - -typedef struct drm_r128_stipple { - unsigned int *mask; -} drm_r128_stipple_t; - -typedef struct drm_r128_indirect { - int idx; - int start; - int end; - int discard; -} drm_r128_indirect_t; - -typedef struct drm_r128_fullscreen { - enum { - R128_INIT_FULLSCREEN = 0x01, - R128_CLEANUP_FULLSCREEN = 0x02 - } func; -} drm_r128_fullscreen_t; - -/* 2.3: An ioctl to get parameters that aren't available to the 3d - * client any other way. - */ -#define R128_PARAM_IRQ_NR 1 - -typedef struct drm_r128_getparam { - int param; - void *value; -} drm_r128_getparam_t; - -#if defined(__cplusplus) -} -#endif - -#endif diff --git a/linux-headers/include/drm/savage_drm.h b/linux-headers/include/drm/savage_drm.h deleted file mode 100644 index 1a91234e675..00000000000 --- a/linux-headers/include/drm/savage_drm.h +++ /dev/null @@ -1,220 +0,0 @@ -/* savage_drm.h -- Public header for the savage driver - * - * Copyright 2004 Felix Kuehling - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sub license, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial portions - * of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NON-INFRINGEMENT. IN NO EVENT SHALL FELIX KUEHLING BE LIABLE FOR - * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF - * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION - * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - */ - -#ifndef __SAVAGE_DRM_H__ -#define __SAVAGE_DRM_H__ - -#include "drm.h" - -#if defined(__cplusplus) -extern "C" { -#endif - -#ifndef __SAVAGE_SAREA_DEFINES__ -#define __SAVAGE_SAREA_DEFINES__ - -/* 2 heaps (1 for card, 1 for agp), each divided into up to 128 - * regions, subject to a minimum region size of (1<<16) == 64k. - * - * Clients may subdivide regions internally, but when sharing between - * clients, the region size is the minimum granularity. - */ - -#define SAVAGE_CARD_HEAP 0 -#define SAVAGE_AGP_HEAP 1 -#define SAVAGE_NR_TEX_HEAPS 2 -#define SAVAGE_NR_TEX_REGIONS 16 -#define SAVAGE_LOG_MIN_TEX_REGION_SIZE 16 - -#endif /* __SAVAGE_SAREA_DEFINES__ */ - -typedef struct _drm_savage_sarea { - /* LRU lists for texture memory in agp space and on the card. - */ - struct drm_tex_region texList[SAVAGE_NR_TEX_HEAPS][SAVAGE_NR_TEX_REGIONS + - 1]; - unsigned int texAge[SAVAGE_NR_TEX_HEAPS]; - - /* Mechanism to validate card state. - */ - int ctxOwner; -} drm_savage_sarea_t, *drm_savage_sarea_ptr; - -/* Savage-specific ioctls - */ -#define DRM_SAVAGE_BCI_INIT 0x00 -#define DRM_SAVAGE_BCI_CMDBUF 0x01 -#define DRM_SAVAGE_BCI_EVENT_EMIT 0x02 -#define DRM_SAVAGE_BCI_EVENT_WAIT 0x03 - -#define DRM_IOCTL_SAVAGE_BCI_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_SAVAGE_BCI_INIT, drm_savage_init_t) -#define DRM_IOCTL_SAVAGE_BCI_CMDBUF DRM_IOW( DRM_COMMAND_BASE + DRM_SAVAGE_BCI_CMDBUF, drm_savage_cmdbuf_t) -#define DRM_IOCTL_SAVAGE_BCI_EVENT_EMIT DRM_IOWR(DRM_COMMAND_BASE + DRM_SAVAGE_BCI_EVENT_EMIT, drm_savage_event_emit_t) -#define DRM_IOCTL_SAVAGE_BCI_EVENT_WAIT DRM_IOW( DRM_COMMAND_BASE + DRM_SAVAGE_BCI_EVENT_WAIT, drm_savage_event_wait_t) - -#define SAVAGE_DMA_PCI 1 -#define SAVAGE_DMA_AGP 3 -typedef struct drm_savage_init { - enum { - SAVAGE_INIT_BCI = 1, - SAVAGE_CLEANUP_BCI = 2 - } func; - unsigned int sarea_priv_offset; - - /* some parameters */ - unsigned int cob_size; - unsigned int bci_threshold_lo, bci_threshold_hi; - unsigned int dma_type; - - /* frame buffer layout */ - unsigned int fb_bpp; - unsigned int front_offset, front_pitch; - unsigned int back_offset, back_pitch; - unsigned int depth_bpp; - unsigned int depth_offset, depth_pitch; - - /* local textures */ - unsigned int texture_offset; - unsigned int texture_size; - - /* physical locations of non-permanent maps */ - unsigned long status_offset; - unsigned long buffers_offset; - unsigned long agp_textures_offset; - unsigned long cmd_dma_offset; -} drm_savage_init_t; - -typedef union drm_savage_cmd_header drm_savage_cmd_header_t; -typedef struct drm_savage_cmdbuf { - /* command buffer in client's address space */ - drm_savage_cmd_header_t *cmd_addr; - unsigned int size; /* size of the command buffer in 64bit units */ - - unsigned int dma_idx; /* DMA buffer index to use */ - int discard; /* discard DMA buffer when done */ - /* vertex buffer in client's address space */ - unsigned int *vb_addr; - unsigned int vb_size; /* size of client vertex buffer in bytes */ - unsigned int vb_stride; /* stride of vertices in 32bit words */ - /* boxes in client's address space */ - struct drm_clip_rect *box_addr; - unsigned int nbox; /* number of clipping boxes */ -} drm_savage_cmdbuf_t; - -#define SAVAGE_WAIT_2D 0x1 /* wait for 2D idle before updating event tag */ -#define SAVAGE_WAIT_3D 0x2 /* wait for 3D idle before updating event tag */ -#define SAVAGE_WAIT_IRQ 0x4 /* emit or wait for IRQ, not implemented yet */ -typedef struct drm_savage_event { - unsigned int count; - unsigned int flags; -} drm_savage_event_emit_t, drm_savage_event_wait_t; - -/* Commands for the cmdbuf ioctl - */ -#define SAVAGE_CMD_STATE 0 /* a range of state registers */ -#define SAVAGE_CMD_DMA_PRIM 1 /* vertices from DMA buffer */ -#define SAVAGE_CMD_VB_PRIM 2 /* vertices from client vertex buffer */ -#define SAVAGE_CMD_DMA_IDX 3 /* indexed vertices from DMA buffer */ -#define SAVAGE_CMD_VB_IDX 4 /* indexed vertices client vertex buffer */ -#define SAVAGE_CMD_CLEAR 5 /* clear buffers */ -#define SAVAGE_CMD_SWAP 6 /* swap buffers */ - -/* Primitive types -*/ -#define SAVAGE_PRIM_TRILIST 0 /* triangle list */ -#define SAVAGE_PRIM_TRISTRIP 1 /* triangle strip */ -#define SAVAGE_PRIM_TRIFAN 2 /* triangle fan */ -#define SAVAGE_PRIM_TRILIST_201 3 /* reorder verts for correct flat - * shading on s3d */ - -/* Skip flags (vertex format) - */ -#define SAVAGE_SKIP_Z 0x01 -#define SAVAGE_SKIP_W 0x02 -#define SAVAGE_SKIP_C0 0x04 -#define SAVAGE_SKIP_C1 0x08 -#define SAVAGE_SKIP_S0 0x10 -#define SAVAGE_SKIP_T0 0x20 -#define SAVAGE_SKIP_ST0 0x30 -#define SAVAGE_SKIP_S1 0x40 -#define SAVAGE_SKIP_T1 0x80 -#define SAVAGE_SKIP_ST1 0xc0 -#define SAVAGE_SKIP_ALL_S3D 0x3f -#define SAVAGE_SKIP_ALL_S4 0xff - -/* Buffer names for clear command - */ -#define SAVAGE_FRONT 0x1 -#define SAVAGE_BACK 0x2 -#define SAVAGE_DEPTH 0x4 - -/* 64-bit command header - */ -union drm_savage_cmd_header { - struct { - unsigned char cmd; /* command */ - unsigned char pad0; - unsigned short pad1; - unsigned short pad2; - unsigned short pad3; - } cmd; /* generic */ - struct { - unsigned char cmd; - unsigned char global; /* need idle engine? */ - unsigned short count; /* number of consecutive registers */ - unsigned short start; /* first register */ - unsigned short pad3; - } state; /* SAVAGE_CMD_STATE */ - struct { - unsigned char cmd; - unsigned char prim; /* primitive type */ - unsigned short skip; /* vertex format (skip flags) */ - unsigned short count; /* number of vertices */ - unsigned short start; /* first vertex in DMA/vertex buffer */ - } prim; /* SAVAGE_CMD_DMA_PRIM, SAVAGE_CMD_VB_PRIM */ - struct { - unsigned char cmd; - unsigned char prim; - unsigned short skip; - unsigned short count; /* number of indices that follow */ - unsigned short pad3; - } idx; /* SAVAGE_CMD_DMA_IDX, SAVAGE_CMD_VB_IDX */ - struct { - unsigned char cmd; - unsigned char pad0; - unsigned short pad1; - unsigned int flags; - } clear0; /* SAVAGE_CMD_CLEAR */ - struct { - unsigned int mask; - unsigned int value; - } clear1; /* SAVAGE_CMD_CLEAR data */ -}; - -#if defined(__cplusplus) -} -#endif - -#endif diff --git a/linux-headers/include/drm/sis_drm.h b/linux-headers/include/drm/sis_drm.h deleted file mode 100644 index 3e3f7e989e0..00000000000 --- a/linux-headers/include/drm/sis_drm.h +++ /dev/null @@ -1,77 +0,0 @@ -/* sis_drv.h -- Private header for sis driver -*- linux-c -*- */ -/* - * Copyright 2005 Eric Anholt - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - * - */ - -#ifndef __SIS_DRM_H__ -#define __SIS_DRM_H__ - -#include "drm.h" - -#if defined(__cplusplus) -extern "C" { -#endif - -/* SiS specific ioctls */ -#define NOT_USED_0_3 -#define DRM_SIS_FB_ALLOC 0x04 -#define DRM_SIS_FB_FREE 0x05 -#define NOT_USED_6_12 -#define DRM_SIS_AGP_INIT 0x13 -#define DRM_SIS_AGP_ALLOC 0x14 -#define DRM_SIS_AGP_FREE 0x15 -#define DRM_SIS_FB_INIT 0x16 - -#define DRM_IOCTL_SIS_FB_ALLOC DRM_IOWR(DRM_COMMAND_BASE + DRM_SIS_FB_ALLOC, drm_sis_mem_t) -#define DRM_IOCTL_SIS_FB_FREE DRM_IOW( DRM_COMMAND_BASE + DRM_SIS_FB_FREE, drm_sis_mem_t) -#define DRM_IOCTL_SIS_AGP_INIT DRM_IOWR(DRM_COMMAND_BASE + DRM_SIS_AGP_INIT, drm_sis_agp_t) -#define DRM_IOCTL_SIS_AGP_ALLOC DRM_IOWR(DRM_COMMAND_BASE + DRM_SIS_AGP_ALLOC, drm_sis_mem_t) -#define DRM_IOCTL_SIS_AGP_FREE DRM_IOW( DRM_COMMAND_BASE + DRM_SIS_AGP_FREE, drm_sis_mem_t) -#define DRM_IOCTL_SIS_FB_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_SIS_FB_INIT, drm_sis_fb_t) -/* -#define DRM_IOCTL_SIS_FLIP DRM_IOW( 0x48, drm_sis_flip_t) -#define DRM_IOCTL_SIS_FLIP_INIT DRM_IO( 0x49) -#define DRM_IOCTL_SIS_FLIP_FINAL DRM_IO( 0x50) -*/ - -typedef struct { - int context; - unsigned long offset; - unsigned long size; - unsigned long free; -} drm_sis_mem_t; - -typedef struct { - unsigned long offset, size; -} drm_sis_agp_t; - -typedef struct { - unsigned long offset, size; -} drm_sis_fb_t; - -#if defined(__cplusplus) -} -#endif - -#endif /* __SIS_DRM_H__ */ diff --git a/linux-headers/include/drm/tegra_drm.h b/linux-headers/include/drm/tegra_drm.h index 6c07919c04e..bb1adff0ef5 100644 --- a/linux-headers/include/drm/tegra_drm.h +++ b/linux-headers/include/drm/tegra_drm.h @@ -1,24 +1,5 @@ -/* - * Copyright (c) 2012-2013, NVIDIA CORPORATION. All rights reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +/* SPDX-License-Identifier: MIT */ +/* Copyright (c) 2012-2020 NVIDIA Corporation */ #ifndef _TEGRA_DRM_H_ #define _TEGRA_DRM_H_ @@ -29,6 +10,8 @@ extern "C" { #endif +/* Tegra DRM legacy UAPI. Only enabled with STAGING */ + #define DRM_TEGRA_GEM_CREATE_TILED (1 << 0) #define DRM_TEGRA_GEM_CREATE_BOTTOM_UP (1 << 1) @@ -649,8 +632,8 @@ struct drm_tegra_gem_get_flags { #define DRM_TEGRA_SYNCPT_READ 0x02 #define DRM_TEGRA_SYNCPT_INCR 0x03 #define DRM_TEGRA_SYNCPT_WAIT 0x04 -#define DRM_TEGRA_OPEN_CHANNEL 0x05 -#define DRM_TEGRA_CLOSE_CHANNEL 0x06 +#define DRM_TEGRA_OPEN_CHANNEL 0x05 +#define DRM_TEGRA_CLOSE_CHANNEL 0x06 #define DRM_TEGRA_GET_SYNCPT 0x07 #define DRM_TEGRA_SUBMIT 0x08 #define DRM_TEGRA_GET_SYNCPT_BASE 0x09 @@ -674,6 +657,402 @@ struct drm_tegra_gem_get_flags { #define DRM_IOCTL_TEGRA_GEM_SET_FLAGS DRM_IOWR(DRM_COMMAND_BASE + DRM_TEGRA_GEM_SET_FLAGS, struct drm_tegra_gem_set_flags) #define DRM_IOCTL_TEGRA_GEM_GET_FLAGS DRM_IOWR(DRM_COMMAND_BASE + DRM_TEGRA_GEM_GET_FLAGS, struct drm_tegra_gem_get_flags) +/* New Tegra DRM UAPI */ + +/* + * Reported by the driver in the `capabilities` field. + * + * DRM_TEGRA_CHANNEL_CAP_CACHE_COHERENT: If set, the engine is cache coherent + * with regard to the system memory. + */ +#define DRM_TEGRA_CHANNEL_CAP_CACHE_COHERENT (1 << 0) + +struct drm_tegra_channel_open { + /** + * @host1x_class: [in] + * + * Host1x class of the engine that will be programmed using this + * channel. + */ + __u32 host1x_class; + + /** + * @flags: [in] + * + * Flags. + */ + __u32 flags; + + /** + * @context: [out] + * + * Opaque identifier corresponding to the opened channel. + */ + __u32 context; + + /** + * @version: [out] + * + * Version of the engine hardware. This can be used by userspace + * to determine how the engine needs to be programmed. + */ + __u32 version; + + /** + * @capabilities: [out] + * + * Flags describing the hardware capabilities. + */ + __u32 capabilities; + __u32 padding; +}; + +struct drm_tegra_channel_close { + /** + * @context: [in] + * + * Identifier of the channel to close. + */ + __u32 context; + __u32 padding; +}; + +/* + * Mapping flags that can be used to influence how the mapping is created. + * + * DRM_TEGRA_CHANNEL_MAP_READ: create mapping that allows HW read access + * DRM_TEGRA_CHANNEL_MAP_WRITE: create mapping that allows HW write access + */ +#define DRM_TEGRA_CHANNEL_MAP_READ (1 << 0) +#define DRM_TEGRA_CHANNEL_MAP_WRITE (1 << 1) +#define DRM_TEGRA_CHANNEL_MAP_READ_WRITE (DRM_TEGRA_CHANNEL_MAP_READ | \ + DRM_TEGRA_CHANNEL_MAP_WRITE) + +struct drm_tegra_channel_map { + /** + * @context: [in] + * + * Identifier of the channel to which make memory available for. + */ + __u32 context; + + /** + * @handle: [in] + * + * GEM handle of the memory to map. + */ + __u32 handle; + + /** + * @flags: [in] + * + * Flags. + */ + __u32 flags; + + /** + * @mapping: [out] + * + * Identifier corresponding to the mapping, to be used for + * relocations or unmapping later. + */ + __u32 mapping; +}; + +struct drm_tegra_channel_unmap { + /** + * @context: [in] + * + * Channel identifier of the channel to unmap memory from. + */ + __u32 context; + + /** + * @mapping: [in] + * + * Mapping identifier of the memory mapping to unmap. + */ + __u32 mapping; +}; + +/* Submission */ + +/** + * Specify that bit 39 of the patched-in address should be set to switch + * swizzling between Tegra and non-Tegra sector layout on systems that store + * surfaces in system memory in non-Tegra sector layout. + */ +#define DRM_TEGRA_SUBMIT_RELOC_SECTOR_LAYOUT (1 << 0) + +struct drm_tegra_submit_buf { + /** + * @mapping: [in] + * + * Identifier of the mapping to use in the submission. + */ + __u32 mapping; + + /** + * @flags: [in] + * + * Flags. + */ + __u32 flags; + + /** + * Information for relocation patching. + */ + struct { + /** + * @target_offset: [in] + * + * Offset from the start of the mapping of the data whose + * address is to be patched into the gather. + */ + __u64 target_offset; + + /** + * @gather_offset_words: [in] + * + * Offset in words from the start of the gather data to + * where the address should be patched into. + */ + __u32 gather_offset_words; + + /** + * @shift: [in] + * + * Number of bits the address should be shifted right before + * patching in. + */ + __u32 shift; + } reloc; +}; + +/** + * Execute `words` words of Host1x opcodes specified in the `gather_data_ptr` + * buffer. Each GATHER_UPTR command uses successive words from the buffer. + */ +#define DRM_TEGRA_SUBMIT_CMD_GATHER_UPTR 0 +/** + * Wait for a syncpoint to reach a value before continuing with further + * commands. + */ +#define DRM_TEGRA_SUBMIT_CMD_WAIT_SYNCPT 1 +/** + * Wait for a syncpoint to reach a value before continuing with further + * commands. The threshold is calculated relative to the start of the job. + */ +#define DRM_TEGRA_SUBMIT_CMD_WAIT_SYNCPT_RELATIVE 2 + +struct drm_tegra_submit_cmd_gather_uptr { + __u32 words; + __u32 reserved[3]; +}; + +struct drm_tegra_submit_cmd_wait_syncpt { + __u32 id; + __u32 value; + __u32 reserved[2]; +}; + +struct drm_tegra_submit_cmd { + /** + * @type: [in] + * + * Command type to execute. One of the DRM_TEGRA_SUBMIT_CMD* + * defines. + */ + __u32 type; + + /** + * @flags: [in] + * + * Flags. + */ + __u32 flags; + + union { + struct drm_tegra_submit_cmd_gather_uptr gather_uptr; + struct drm_tegra_submit_cmd_wait_syncpt wait_syncpt; + __u32 reserved[4]; + }; +}; + +struct drm_tegra_submit_syncpt { + /** + * @id: [in] + * + * ID of the syncpoint that the job will increment. + */ + __u32 id; + + /** + * @flags: [in] + * + * Flags. + */ + __u32 flags; + + /** + * @increments: [in] + * + * Number of times the job will increment this syncpoint. + */ + __u32 increments; + + /** + * @value: [out] + * + * Value the syncpoint will have once the job has completed all + * its specified syncpoint increments. + * + * Note that the kernel may increment the syncpoint before or after + * the job. These increments are not reflected in this field. + * + * If the job hangs or times out, not all of the increments may + * get executed. + */ + __u32 value; +}; + +struct drm_tegra_channel_submit { + /** + * @context: [in] + * + * Identifier of the channel to submit this job to. + */ + __u32 context; + + /** + * @num_bufs: [in] + * + * Number of elements in the `bufs_ptr` array. + */ + __u32 num_bufs; + + /** + * @num_cmds: [in] + * + * Number of elements in the `cmds_ptr` array. + */ + __u32 num_cmds; + + /** + * @gather_data_words: [in] + * + * Number of 32-bit words in the `gather_data_ptr` array. + */ + __u32 gather_data_words; + + /** + * @bufs_ptr: [in] + * + * Pointer to an array of drm_tegra_submit_buf structures. + */ + __u64 bufs_ptr; + + /** + * @cmds_ptr: [in] + * + * Pointer to an array of drm_tegra_submit_cmd structures. + */ + __u64 cmds_ptr; + + /** + * @gather_data_ptr: [in] + * + * Pointer to an array of Host1x opcodes to be used by GATHER_UPTR + * commands. + */ + __u64 gather_data_ptr; + + /** + * @syncobj_in: [in] + * + * Handle for DRM syncobj that will be waited before submission. + * Ignored if zero. + */ + __u32 syncobj_in; + + /** + * @syncobj_out: [in] + * + * Handle for DRM syncobj that will have its fence replaced with + * the job's completion fence. Ignored if zero. + */ + __u32 syncobj_out; + + /** + * @syncpt_incr: [in,out] + * + * Information about the syncpoint the job will increment. + */ + struct drm_tegra_submit_syncpt syncpt; +}; + +struct drm_tegra_syncpoint_allocate { + /** + * @id: [out] + * + * ID of allocated syncpoint. + */ + __u32 id; + __u32 padding; +}; + +struct drm_tegra_syncpoint_free { + /** + * @id: [in] + * + * ID of syncpoint to free. + */ + __u32 id; + __u32 padding; +}; + +struct drm_tegra_syncpoint_wait { + /** + * @timeout: [in] + * + * Absolute timestamp at which the wait will time out. + */ + __s64 timeout_ns; + + /** + * @id: [in] + * + * ID of syncpoint to wait on. + */ + __u32 id; + + /** + * @threshold: [in] + * + * Threshold to wait for. + */ + __u32 threshold; + + /** + * @value: [out] + * + * Value of the syncpoint upon wait completion. + */ + __u32 value; + + __u32 padding; +}; + +#define DRM_IOCTL_TEGRA_CHANNEL_OPEN DRM_IOWR(DRM_COMMAND_BASE + 0x10, struct drm_tegra_channel_open) +#define DRM_IOCTL_TEGRA_CHANNEL_CLOSE DRM_IOWR(DRM_COMMAND_BASE + 0x11, struct drm_tegra_channel_close) +#define DRM_IOCTL_TEGRA_CHANNEL_MAP DRM_IOWR(DRM_COMMAND_BASE + 0x12, struct drm_tegra_channel_map) +#define DRM_IOCTL_TEGRA_CHANNEL_UNMAP DRM_IOWR(DRM_COMMAND_BASE + 0x13, struct drm_tegra_channel_unmap) +#define DRM_IOCTL_TEGRA_CHANNEL_SUBMIT DRM_IOWR(DRM_COMMAND_BASE + 0x14, struct drm_tegra_channel_submit) + +#define DRM_IOCTL_TEGRA_SYNCPOINT_ALLOCATE DRM_IOWR(DRM_COMMAND_BASE + 0x20, struct drm_tegra_syncpoint_allocate) +#define DRM_IOCTL_TEGRA_SYNCPOINT_FREE DRM_IOWR(DRM_COMMAND_BASE + 0x21, struct drm_tegra_syncpoint_free) +#define DRM_IOCTL_TEGRA_SYNCPOINT_WAIT DRM_IOWR(DRM_COMMAND_BASE + 0x22, struct drm_tegra_syncpoint_wait) + #if defined(__cplusplus) } #endif diff --git a/linux-headers/include/drm/v3d_drm.h b/linux-headers/include/drm/v3d_drm.h index 1ce746e228d..3dfc0af8756 100644 --- a/linux-headers/include/drm/v3d_drm.h +++ b/linux-headers/include/drm/v3d_drm.h @@ -38,6 +38,9 @@ extern "C" { #define DRM_V3D_GET_BO_OFFSET 0x05 #define DRM_V3D_SUBMIT_TFU 0x06 #define DRM_V3D_SUBMIT_CSD 0x07 +#define DRM_V3D_PERFMON_CREATE 0x08 +#define DRM_V3D_PERFMON_DESTROY 0x09 +#define DRM_V3D_PERFMON_GET_VALUES 0x0a #define DRM_IOCTL_V3D_SUBMIT_CL DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_SUBMIT_CL, struct drm_v3d_submit_cl) #define DRM_IOCTL_V3D_WAIT_BO DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_WAIT_BO, struct drm_v3d_wait_bo) @@ -47,8 +50,75 @@ extern "C" { #define DRM_IOCTL_V3D_GET_BO_OFFSET DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_GET_BO_OFFSET, struct drm_v3d_get_bo_offset) #define DRM_IOCTL_V3D_SUBMIT_TFU DRM_IOW(DRM_COMMAND_BASE + DRM_V3D_SUBMIT_TFU, struct drm_v3d_submit_tfu) #define DRM_IOCTL_V3D_SUBMIT_CSD DRM_IOW(DRM_COMMAND_BASE + DRM_V3D_SUBMIT_CSD, struct drm_v3d_submit_csd) +#define DRM_IOCTL_V3D_PERFMON_CREATE DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_PERFMON_CREATE, \ + struct drm_v3d_perfmon_create) +#define DRM_IOCTL_V3D_PERFMON_DESTROY DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_PERFMON_DESTROY, \ + struct drm_v3d_perfmon_destroy) +#define DRM_IOCTL_V3D_PERFMON_GET_VALUES DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_PERFMON_GET_VALUES, \ + struct drm_v3d_perfmon_get_values) #define DRM_V3D_SUBMIT_CL_FLUSH_CACHE 0x01 +#define DRM_V3D_SUBMIT_EXTENSION 0x02 + +/* struct drm_v3d_extension - ioctl extensions + * + * Linked-list of generic extensions where the id identify which struct is + * pointed by ext_data. Therefore, DRM_V3D_EXT_ID_* is used on id to identify + * the extension type. + */ +struct drm_v3d_extension { + __u64 next; + __u32 id; +#define DRM_V3D_EXT_ID_MULTI_SYNC 0x01 + __u32 flags; /* mbz */ +}; + +/* struct drm_v3d_sem - wait/signal semaphore + * + * If binary semaphore, it only takes syncobj handle and ignores flags and + * point fields. Point is defined for timeline syncobj feature. + */ +struct drm_v3d_sem { + __u32 handle; /* syncobj */ + /* rsv below, for future uses */ + __u32 flags; + __u64 point; /* for timeline sem support */ + __u64 mbz[2]; /* must be zero, rsv */ +}; + +/* Enum for each of the V3D queues. */ +enum v3d_queue { + V3D_BIN, + V3D_RENDER, + V3D_TFU, + V3D_CSD, + V3D_CACHE_CLEAN, +}; + +/** + * struct drm_v3d_multi_sync - ioctl extension to add support multiples + * syncobjs for commands submission. + * + * When an extension of DRM_V3D_EXT_ID_MULTI_SYNC id is defined, it points to + * this extension to define wait and signal dependencies, instead of single + * in/out sync entries on submitting commands. The field flags is used to + * determine the stage to set wait dependencies. + */ +struct drm_v3d_multi_sync { + struct drm_v3d_extension base; + /* Array of wait and signal semaphores */ + __u64 in_syncs; + __u64 out_syncs; + + /* Number of entries */ + __u32 in_sync_count; + __u32 out_sync_count; + + /* set the stage (v3d_queue) to sync */ + __u32 wait_stage; + + __u32 pad; /* mbz */ +}; /** * struct drm_v3d_submit_cl - ioctl argument for submitting commands to the 3D @@ -126,7 +196,16 @@ struct drm_v3d_submit_cl { /* Number of BO handles passed in (size is that times 4). */ __u32 bo_handle_count; + /* DRM_V3D_SUBMIT_* properties */ __u32 flags; + + /* ID of the perfmon to attach to this job. 0 means no perfmon. */ + __u32 perfmon_id; + + __u32 pad; + + /* Pointer to an array of ioctl extensions*/ + __u64 extensions; }; /** @@ -195,6 +274,8 @@ enum drm_v3d_param { DRM_V3D_PARAM_SUPPORTS_TFU, DRM_V3D_PARAM_SUPPORTS_CSD, DRM_V3D_PARAM_SUPPORTS_CACHE_FLUSH, + DRM_V3D_PARAM_SUPPORTS_PERFMON, + DRM_V3D_PARAM_SUPPORTS_MULTISYNC_EXT, }; struct drm_v3d_get_param { @@ -233,6 +314,11 @@ struct drm_v3d_submit_tfu { __u32 in_sync; /* Sync object to signal when the TFU job is done. */ __u32 out_sync; + + __u32 flags; + + /* Pointer to an array of ioctl extensions*/ + __u64 extensions; }; /* Submits a compute shader for dispatch. This job will block on any @@ -258,6 +344,134 @@ struct drm_v3d_submit_csd { __u32 in_sync; /* Sync object to signal when the CSD job is done. */ __u32 out_sync; + + /* ID of the perfmon to attach to this job. 0 means no perfmon. */ + __u32 perfmon_id; + + /* Pointer to an array of ioctl extensions*/ + __u64 extensions; + + __u32 flags; + + __u32 pad; +}; + +enum { + V3D_PERFCNT_FEP_VALID_PRIMTS_NO_PIXELS, + V3D_PERFCNT_FEP_VALID_PRIMS, + V3D_PERFCNT_FEP_EZ_NFCLIP_QUADS, + V3D_PERFCNT_FEP_VALID_QUADS, + V3D_PERFCNT_TLB_QUADS_STENCIL_FAIL, + V3D_PERFCNT_TLB_QUADS_STENCILZ_FAIL, + V3D_PERFCNT_TLB_QUADS_STENCILZ_PASS, + V3D_PERFCNT_TLB_QUADS_ZERO_COV, + V3D_PERFCNT_TLB_QUADS_NONZERO_COV, + V3D_PERFCNT_TLB_QUADS_WRITTEN, + V3D_PERFCNT_PTB_PRIM_VIEWPOINT_DISCARD, + V3D_PERFCNT_PTB_PRIM_CLIP, + V3D_PERFCNT_PTB_PRIM_REV, + V3D_PERFCNT_QPU_IDLE_CYCLES, + V3D_PERFCNT_QPU_ACTIVE_CYCLES_VERTEX_COORD_USER, + V3D_PERFCNT_QPU_ACTIVE_CYCLES_FRAG, + V3D_PERFCNT_QPU_CYCLES_VALID_INSTR, + V3D_PERFCNT_QPU_CYCLES_TMU_STALL, + V3D_PERFCNT_QPU_CYCLES_SCOREBOARD_STALL, + V3D_PERFCNT_QPU_CYCLES_VARYINGS_STALL, + V3D_PERFCNT_QPU_IC_HIT, + V3D_PERFCNT_QPU_IC_MISS, + V3D_PERFCNT_QPU_UC_HIT, + V3D_PERFCNT_QPU_UC_MISS, + V3D_PERFCNT_TMU_TCACHE_ACCESS, + V3D_PERFCNT_TMU_TCACHE_MISS, + V3D_PERFCNT_VPM_VDW_STALL, + V3D_PERFCNT_VPM_VCD_STALL, + V3D_PERFCNT_BIN_ACTIVE, + V3D_PERFCNT_RDR_ACTIVE, + V3D_PERFCNT_L2T_HITS, + V3D_PERFCNT_L2T_MISSES, + V3D_PERFCNT_CYCLE_COUNT, + V3D_PERFCNT_QPU_CYCLES_STALLED_VERTEX_COORD_USER, + V3D_PERFCNT_QPU_CYCLES_STALLED_FRAGMENT, + V3D_PERFCNT_PTB_PRIMS_BINNED, + V3D_PERFCNT_AXI_WRITES_WATCH_0, + V3D_PERFCNT_AXI_READS_WATCH_0, + V3D_PERFCNT_AXI_WRITE_STALLS_WATCH_0, + V3D_PERFCNT_AXI_READ_STALLS_WATCH_0, + V3D_PERFCNT_AXI_WRITE_BYTES_WATCH_0, + V3D_PERFCNT_AXI_READ_BYTES_WATCH_0, + V3D_PERFCNT_AXI_WRITES_WATCH_1, + V3D_PERFCNT_AXI_READS_WATCH_1, + V3D_PERFCNT_AXI_WRITE_STALLS_WATCH_1, + V3D_PERFCNT_AXI_READ_STALLS_WATCH_1, + V3D_PERFCNT_AXI_WRITE_BYTES_WATCH_1, + V3D_PERFCNT_AXI_READ_BYTES_WATCH_1, + V3D_PERFCNT_TLB_PARTIAL_QUADS, + V3D_PERFCNT_TMU_CONFIG_ACCESSES, + V3D_PERFCNT_L2T_NO_ID_STALL, + V3D_PERFCNT_L2T_COM_QUE_STALL, + V3D_PERFCNT_L2T_TMU_WRITES, + V3D_PERFCNT_TMU_ACTIVE_CYCLES, + V3D_PERFCNT_TMU_STALLED_CYCLES, + V3D_PERFCNT_CLE_ACTIVE, + V3D_PERFCNT_L2T_TMU_READS, + V3D_PERFCNT_L2T_CLE_READS, + V3D_PERFCNT_L2T_VCD_READS, + V3D_PERFCNT_L2T_TMUCFG_READS, + V3D_PERFCNT_L2T_SLC0_READS, + V3D_PERFCNT_L2T_SLC1_READS, + V3D_PERFCNT_L2T_SLC2_READS, + V3D_PERFCNT_L2T_TMU_W_MISSES, + V3D_PERFCNT_L2T_TMU_R_MISSES, + V3D_PERFCNT_L2T_CLE_MISSES, + V3D_PERFCNT_L2T_VCD_MISSES, + V3D_PERFCNT_L2T_TMUCFG_MISSES, + V3D_PERFCNT_L2T_SLC0_MISSES, + V3D_PERFCNT_L2T_SLC1_MISSES, + V3D_PERFCNT_L2T_SLC2_MISSES, + V3D_PERFCNT_CORE_MEM_WRITES, + V3D_PERFCNT_L2T_MEM_WRITES, + V3D_PERFCNT_PTB_MEM_WRITES, + V3D_PERFCNT_TLB_MEM_WRITES, + V3D_PERFCNT_CORE_MEM_READS, + V3D_PERFCNT_L2T_MEM_READS, + V3D_PERFCNT_PTB_MEM_READS, + V3D_PERFCNT_PSE_MEM_READS, + V3D_PERFCNT_TLB_MEM_READS, + V3D_PERFCNT_GMP_MEM_READS, + V3D_PERFCNT_PTB_W_MEM_WORDS, + V3D_PERFCNT_TLB_W_MEM_WORDS, + V3D_PERFCNT_PSE_R_MEM_WORDS, + V3D_PERFCNT_TLB_R_MEM_WORDS, + V3D_PERFCNT_TMU_MRU_HITS, + V3D_PERFCNT_COMPUTE_ACTIVE, + V3D_PERFCNT_NUM, +}; + +#define DRM_V3D_MAX_PERF_COUNTERS 32 + +struct drm_v3d_perfmon_create { + __u32 id; + __u32 ncounters; + __u8 counters[DRM_V3D_MAX_PERF_COUNTERS]; +}; + +struct drm_v3d_perfmon_destroy { + __u32 id; +}; + +/* + * Returns the values of the performance counters tracked by this + * perfmon (as an array of ncounters u64 values). + * + * No implicit synchronization is performed, so the user has to + * guarantee that any jobs using this perfmon have already been + * completed (probably by blocking on the seqno returned by the + * last exec that used the perfmon). + */ +struct drm_v3d_perfmon_get_values { + __u32 id; + __u32 pad; + __u64 values_ptr; }; #if defined(__cplusplus) diff --git a/linux-headers/include/drm/via_drm.h b/linux-headers/include/drm/via_drm.h deleted file mode 100644 index 4f68e9a323b..00000000000 --- a/linux-headers/include/drm/via_drm.h +++ /dev/null @@ -1,282 +0,0 @@ -/* - * Copyright 1998-2003 VIA Technologies, Inc. All Rights Reserved. - * Copyright 2001-2003 S3 Graphics, Inc. All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sub license, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial portions - * of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL - * VIA, S3 GRAPHICS, AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - */ -#ifndef _VIA_DRM_H_ -#define _VIA_DRM_H_ - -#include "drm.h" - -#if defined(__cplusplus) -extern "C" { -#endif - -/* WARNING: These defines must be the same as what the Xserver uses. - * if you change them, you must change the defines in the Xserver. - */ - -#ifndef _VIA_DEFINES_ -#define _VIA_DEFINES_ - - -#define VIA_NR_SAREA_CLIPRECTS 8 -#define VIA_NR_XVMC_PORTS 10 -#define VIA_NR_XVMC_LOCKS 5 -#define VIA_MAX_CACHELINE_SIZE 64 -#define XVMCLOCKPTR(saPriv,lockNo) \ - ((__volatile__ struct drm_hw_lock *)(((((unsigned long) (saPriv)->XvMCLockArea) + \ - (VIA_MAX_CACHELINE_SIZE - 1)) & \ - ~(VIA_MAX_CACHELINE_SIZE - 1)) + \ - VIA_MAX_CACHELINE_SIZE*(lockNo))) - -/* Each region is a minimum of 64k, and there are at most 64 of them. - */ -#define VIA_NR_TEX_REGIONS 64 -#define VIA_LOG_MIN_TEX_REGION_SIZE 16 -#endif - -#define VIA_UPLOAD_TEX0IMAGE 0x1 /* handled clientside */ -#define VIA_UPLOAD_TEX1IMAGE 0x2 /* handled clientside */ -#define VIA_UPLOAD_CTX 0x4 -#define VIA_UPLOAD_BUFFERS 0x8 -#define VIA_UPLOAD_TEX0 0x10 -#define VIA_UPLOAD_TEX1 0x20 -#define VIA_UPLOAD_CLIPRECTS 0x40 -#define VIA_UPLOAD_ALL 0xff - -/* VIA specific ioctls */ -#define DRM_VIA_ALLOCMEM 0x00 -#define DRM_VIA_FREEMEM 0x01 -#define DRM_VIA_AGP_INIT 0x02 -#define DRM_VIA_FB_INIT 0x03 -#define DRM_VIA_MAP_INIT 0x04 -#define DRM_VIA_DEC_FUTEX 0x05 -#define NOT_USED -#define DRM_VIA_DMA_INIT 0x07 -#define DRM_VIA_CMDBUFFER 0x08 -#define DRM_VIA_FLUSH 0x09 -#define DRM_VIA_PCICMD 0x0a -#define DRM_VIA_CMDBUF_SIZE 0x0b -#define NOT_USED -#define DRM_VIA_WAIT_IRQ 0x0d -#define DRM_VIA_DMA_BLIT 0x0e -#define DRM_VIA_BLIT_SYNC 0x0f - -#define DRM_IOCTL_VIA_ALLOCMEM DRM_IOWR(DRM_COMMAND_BASE + DRM_VIA_ALLOCMEM, drm_via_mem_t) -#define DRM_IOCTL_VIA_FREEMEM DRM_IOW( DRM_COMMAND_BASE + DRM_VIA_FREEMEM, drm_via_mem_t) -#define DRM_IOCTL_VIA_AGP_INIT DRM_IOWR(DRM_COMMAND_BASE + DRM_VIA_AGP_INIT, drm_via_agp_t) -#define DRM_IOCTL_VIA_FB_INIT DRM_IOWR(DRM_COMMAND_BASE + DRM_VIA_FB_INIT, drm_via_fb_t) -#define DRM_IOCTL_VIA_MAP_INIT DRM_IOWR(DRM_COMMAND_BASE + DRM_VIA_MAP_INIT, drm_via_init_t) -#define DRM_IOCTL_VIA_DEC_FUTEX DRM_IOW( DRM_COMMAND_BASE + DRM_VIA_DEC_FUTEX, drm_via_futex_t) -#define DRM_IOCTL_VIA_DMA_INIT DRM_IOWR(DRM_COMMAND_BASE + DRM_VIA_DMA_INIT, drm_via_dma_init_t) -#define DRM_IOCTL_VIA_CMDBUFFER DRM_IOW( DRM_COMMAND_BASE + DRM_VIA_CMDBUFFER, drm_via_cmdbuffer_t) -#define DRM_IOCTL_VIA_FLUSH DRM_IO( DRM_COMMAND_BASE + DRM_VIA_FLUSH) -#define DRM_IOCTL_VIA_PCICMD DRM_IOW( DRM_COMMAND_BASE + DRM_VIA_PCICMD, drm_via_cmdbuffer_t) -#define DRM_IOCTL_VIA_CMDBUF_SIZE DRM_IOWR( DRM_COMMAND_BASE + DRM_VIA_CMDBUF_SIZE, \ - drm_via_cmdbuf_size_t) -#define DRM_IOCTL_VIA_WAIT_IRQ DRM_IOWR( DRM_COMMAND_BASE + DRM_VIA_WAIT_IRQ, drm_via_irqwait_t) -#define DRM_IOCTL_VIA_DMA_BLIT DRM_IOW(DRM_COMMAND_BASE + DRM_VIA_DMA_BLIT, drm_via_dmablit_t) -#define DRM_IOCTL_VIA_BLIT_SYNC DRM_IOW(DRM_COMMAND_BASE + DRM_VIA_BLIT_SYNC, drm_via_blitsync_t) - -/* Indices into buf.Setup where various bits of state are mirrored per - * context and per buffer. These can be fired at the card as a unit, - * or in a piecewise fashion as required. - */ - -#define VIA_TEX_SETUP_SIZE 8 - -/* Flags for clear ioctl - */ -#define VIA_FRONT 0x1 -#define VIA_BACK 0x2 -#define VIA_DEPTH 0x4 -#define VIA_STENCIL 0x8 -#define VIA_MEM_VIDEO 0 /* matches drm constant */ -#define VIA_MEM_AGP 1 /* matches drm constant */ -#define VIA_MEM_SYSTEM 2 -#define VIA_MEM_MIXED 3 -#define VIA_MEM_UNKNOWN 4 - -typedef struct { - __u32 offset; - __u32 size; -} drm_via_agp_t; - -typedef struct { - __u32 offset; - __u32 size; -} drm_via_fb_t; - -typedef struct { - __u32 context; - __u32 type; - __u32 size; - unsigned long index; - unsigned long offset; -} drm_via_mem_t; - -typedef struct _drm_via_init { - enum { - VIA_INIT_MAP = 0x01, - VIA_CLEANUP_MAP = 0x02 - } func; - - unsigned long sarea_priv_offset; - unsigned long fb_offset; - unsigned long mmio_offset; - unsigned long agpAddr; -} drm_via_init_t; - -typedef struct _drm_via_futex { - enum { - VIA_FUTEX_WAIT = 0x00, - VIA_FUTEX_WAKE = 0X01 - } func; - __u32 ms; - __u32 lock; - __u32 val; -} drm_via_futex_t; - -typedef struct _drm_via_dma_init { - enum { - VIA_INIT_DMA = 0x01, - VIA_CLEANUP_DMA = 0x02, - VIA_DMA_INITIALIZED = 0x03 - } func; - - unsigned long offset; - unsigned long size; - unsigned long reg_pause_addr; -} drm_via_dma_init_t; - -typedef struct _drm_via_cmdbuffer { - char *buf; - unsigned long size; -} drm_via_cmdbuffer_t; - -/* Warning: If you change the SAREA structure you must change the Xserver - * structure as well */ - -typedef struct _drm_via_tex_region { - unsigned char next, prev; /* indices to form a circular LRU */ - unsigned char inUse; /* owned by a client, or free? */ - int age; /* tracked by clients to update local LRU's */ -} drm_via_tex_region_t; - -typedef struct _drm_via_sarea { - unsigned int dirty; - unsigned int nbox; - struct drm_clip_rect boxes[VIA_NR_SAREA_CLIPRECTS]; - drm_via_tex_region_t texList[VIA_NR_TEX_REGIONS + 1]; - int texAge; /* last time texture was uploaded */ - int ctxOwner; /* last context to upload state */ - int vertexPrim; - - /* - * Below is for XvMC. - * We want the lock integers alone on, and aligned to, a cache line. - * Therefore this somewhat strange construct. - */ - - char XvMCLockArea[VIA_MAX_CACHELINE_SIZE * (VIA_NR_XVMC_LOCKS + 1)]; - - unsigned int XvMCDisplaying[VIA_NR_XVMC_PORTS]; - unsigned int XvMCSubPicOn[VIA_NR_XVMC_PORTS]; - unsigned int XvMCCtxNoGrabbed; /* Last context to hold decoder */ - - /* Used by the 3d driver only at this point, for pageflipping: - */ - unsigned int pfCurrentOffset; -} drm_via_sarea_t; - -typedef struct _drm_via_cmdbuf_size { - enum { - VIA_CMDBUF_SPACE = 0x01, - VIA_CMDBUF_LAG = 0x02 - } func; - int wait; - __u32 size; -} drm_via_cmdbuf_size_t; - -typedef enum { - VIA_IRQ_ABSOLUTE = 0x0, - VIA_IRQ_RELATIVE = 0x1, - VIA_IRQ_SIGNAL = 0x10000000, - VIA_IRQ_FORCE_SEQUENCE = 0x20000000 -} via_irq_seq_type_t; - -#define VIA_IRQ_FLAGS_MASK 0xF0000000 - -enum drm_via_irqs { - drm_via_irq_hqv0 = 0, - drm_via_irq_hqv1, - drm_via_irq_dma0_dd, - drm_via_irq_dma0_td, - drm_via_irq_dma1_dd, - drm_via_irq_dma1_td, - drm_via_irq_num -}; - -struct drm_via_wait_irq_request { - unsigned irq; - via_irq_seq_type_t type; - __u32 sequence; - __u32 signal; -}; - -typedef union drm_via_irqwait { - struct drm_via_wait_irq_request request; - struct drm_wait_vblank_reply reply; -} drm_via_irqwait_t; - -typedef struct drm_via_blitsync { - __u32 sync_handle; - unsigned engine; -} drm_via_blitsync_t; - -/* - * Below,"flags" is currently unused but will be used for possible future - * extensions like kernel space bounce buffers for bad alignments and - * blit engine busy-wait polling for better latency in the absence of - * interrupts. - */ - -typedef struct drm_via_dmablit { - __u32 num_lines; - __u32 line_length; - - __u32 fb_addr; - __u32 fb_stride; - - unsigned char *mem_addr; - __u32 mem_stride; - - __u32 flags; - int to_fb; - - drm_via_blitsync_t sync; -} drm_via_dmablit_t; - -#if defined(__cplusplus) -} -#endif - -#endif /* _VIA_DRM_H_ */ diff --git a/linux-headers/include/drm/virtgpu_drm.h b/linux-headers/include/drm/virtgpu_drm.h index f06a789f34c..b1d0e56565b 100644 --- a/linux-headers/include/drm/virtgpu_drm.h +++ b/linux-headers/include/drm/virtgpu_drm.h @@ -46,12 +46,16 @@ extern "C" { #define DRM_VIRTGPU_TRANSFER_TO_HOST 0x07 #define DRM_VIRTGPU_WAIT 0x08 #define DRM_VIRTGPU_GET_CAPS 0x09 +#define DRM_VIRTGPU_RESOURCE_CREATE_BLOB 0x0a +#define DRM_VIRTGPU_CONTEXT_INIT 0x0b #define VIRTGPU_EXECBUF_FENCE_FD_IN 0x01 #define VIRTGPU_EXECBUF_FENCE_FD_OUT 0x02 +#define VIRTGPU_EXECBUF_RING_IDX 0x04 #define VIRTGPU_EXECBUF_FLAGS (\ VIRTGPU_EXECBUF_FENCE_FD_IN |\ VIRTGPU_EXECBUF_FENCE_FD_OUT |\ + VIRTGPU_EXECBUF_RING_IDX |\ 0) struct drm_virtgpu_map { @@ -60,6 +64,17 @@ struct drm_virtgpu_map { __u32 pad; }; +#define VIRTGPU_EXECBUF_SYNCOBJ_RESET 0x01 +#define VIRTGPU_EXECBUF_SYNCOBJ_FLAGS ( \ + VIRTGPU_EXECBUF_SYNCOBJ_RESET | \ + 0) +struct drm_virtgpu_execbuffer_syncobj { + __u32 handle; + __u32 flags; + __u64 point; +}; + +/* fence_fd is modified on success if VIRTGPU_EXECBUF_FENCE_FD_OUT flag is set. */ struct drm_virtgpu_execbuffer { __u32 flags; __u32 size; @@ -67,10 +82,21 @@ struct drm_virtgpu_execbuffer { __u64 bo_handles; __u32 num_bo_handles; __s32 fence_fd; /* in/out fence fd (see VIRTGPU_EXECBUF_FENCE_FD_IN/OUT) */ + __u32 ring_idx; /* command ring index (see VIRTGPU_EXECBUF_RING_IDX) */ + __u32 syncobj_stride; /* size of @drm_virtgpu_execbuffer_syncobj */ + __u32 num_in_syncobjs; + __u32 num_out_syncobjs; + __u64 in_syncobjs; + __u64 out_syncobjs; }; #define VIRTGPU_PARAM_3D_FEATURES 1 /* do we have 3D features in the hw */ #define VIRTGPU_PARAM_CAPSET_QUERY_FIX 2 /* do we have the capset fix */ +#define VIRTGPU_PARAM_RESOURCE_BLOB 3 /* DRM_VIRTGPU_RESOURCE_CREATE_BLOB */ +#define VIRTGPU_PARAM_HOST_VISIBLE 4 /* Host blob resources are mappable */ +#define VIRTGPU_PARAM_CROSS_DEVICE 5 /* Cross virtio-device resource sharing */ +#define VIRTGPU_PARAM_CONTEXT_INIT 6 /* DRM_VIRTGPU_CONTEXT_INIT */ +#define VIRTGPU_PARAM_SUPPORTED_CAPSET_IDs 7 /* Bitmask of supported capability set ids */ struct drm_virtgpu_getparam { __u64 param; @@ -100,7 +126,7 @@ struct drm_virtgpu_resource_info { __u32 bo_handle; __u32 res_handle; __u32 size; - __u32 stride; + __u32 blob_mem; }; struct drm_virtgpu_3d_box { @@ -117,6 +143,8 @@ struct drm_virtgpu_3d_transfer_to_host { struct drm_virtgpu_3d_box box; __u32 level; __u32 offset; + __u32 stride; + __u32 layer_stride; }; struct drm_virtgpu_3d_transfer_from_host { @@ -124,6 +152,8 @@ struct drm_virtgpu_3d_transfer_from_host { struct drm_virtgpu_3d_box box; __u32 level; __u32 offset; + __u32 stride; + __u32 layer_stride; }; #define VIRTGPU_WAIT_NOWAIT 1 /* like it */ @@ -140,6 +170,54 @@ struct drm_virtgpu_get_caps { __u32 pad; }; +struct drm_virtgpu_resource_create_blob { +#define VIRTGPU_BLOB_MEM_GUEST 0x0001 +#define VIRTGPU_BLOB_MEM_HOST3D 0x0002 +#define VIRTGPU_BLOB_MEM_HOST3D_GUEST 0x0003 + +#define VIRTGPU_BLOB_FLAG_USE_MAPPABLE 0x0001 +#define VIRTGPU_BLOB_FLAG_USE_SHAREABLE 0x0002 +#define VIRTGPU_BLOB_FLAG_USE_CROSS_DEVICE 0x0004 + /* zero is invalid blob_mem */ + __u32 blob_mem; + __u32 blob_flags; + __u32 bo_handle; + __u32 res_handle; + __u64 size; + + /* + * for 3D contexts with VIRTGPU_BLOB_MEM_HOST3D_GUEST and + * VIRTGPU_BLOB_MEM_HOST3D otherwise, must be zero. + */ + __u32 pad; + __u32 cmd_size; + __u64 cmd; + __u64 blob_id; +}; + +#define VIRTGPU_CONTEXT_PARAM_CAPSET_ID 0x0001 +#define VIRTGPU_CONTEXT_PARAM_NUM_RINGS 0x0002 +#define VIRTGPU_CONTEXT_PARAM_POLL_RINGS_MASK 0x0003 +struct drm_virtgpu_context_set_param { + __u64 param; + __u64 value; +}; + +struct drm_virtgpu_context_init { + __u32 num_params; + __u32 pad; + + /* pointer to drm_virtgpu_context_set_param array */ + __u64 ctx_set_params; +}; + +/* + * Event code that's given when VIRTGPU_CONTEXT_PARAM_POLL_RINGS_MASK is in + * effect. The event size is sizeof(drm_event), since there is no additional + * payload. + */ +#define VIRTGPU_EVENT_FENCE_SIGNALED 0x90000000 + #define DRM_IOCTL_VIRTGPU_MAP \ DRM_IOWR(DRM_COMMAND_BASE + DRM_VIRTGPU_MAP, struct drm_virtgpu_map) @@ -175,6 +253,14 @@ struct drm_virtgpu_get_caps { DRM_IOWR(DRM_COMMAND_BASE + DRM_VIRTGPU_GET_CAPS, \ struct drm_virtgpu_get_caps) +#define DRM_IOCTL_VIRTGPU_RESOURCE_CREATE_BLOB \ + DRM_IOWR(DRM_COMMAND_BASE + DRM_VIRTGPU_RESOURCE_CREATE_BLOB, \ + struct drm_virtgpu_resource_create_blob) + +#define DRM_IOCTL_VIRTGPU_CONTEXT_INIT \ + DRM_IOWR(DRM_COMMAND_BASE + DRM_VIRTGPU_CONTEXT_INIT, \ + struct drm_virtgpu_context_init) + #if defined(__cplusplus) } #endif diff --git a/linux-headers/include/drm/vmwgfx_drm.h b/linux-headers/include/drm/vmwgfx_drm.h index 02e91750747..26549c86a91 100644 --- a/linux-headers/include/drm/vmwgfx_drm.h +++ b/linux-headers/include/drm/vmwgfx_drm.h @@ -1,6 +1,6 @@ /************************************************************************** * - * Copyright © 2009-2015 VMware, Inc., Palo Alto, CA., USA + * Copyright © 2009-2022 VMware, Inc., Palo Alto, CA., USA * All Rights Reserved. * * Permission is hereby granted, free of charge, to any person obtaining a @@ -72,6 +72,9 @@ extern "C" { #define DRM_VMW_GB_SURFACE_CREATE_EXT 27 #define DRM_VMW_GB_SURFACE_REF_EXT 28 #define DRM_VMW_MSG 29 +#define DRM_VMW_MKSSTAT_RESET 30 +#define DRM_VMW_MKSSTAT_ADD 31 +#define DRM_VMW_MKSSTAT_REMOVE 32 /*************************************************************************/ /** @@ -89,6 +92,12 @@ extern "C" { * * DRM_VMW_PARAM_SM5 * SM5 support is enabled. + * + * DRM_VMW_PARAM_GL43 + * SM5.1+GL4.3 support is enabled. + * + * DRM_VMW_PARAM_DEVICE_ID + * PCI ID of the underlying SVGA device. */ #define DRM_VMW_PARAM_NUM_STREAMS 0 @@ -107,6 +116,8 @@ extern "C" { #define DRM_VMW_PARAM_HW_CAPS2 13 #define DRM_VMW_PARAM_SM4_1 14 #define DRM_VMW_PARAM_SM5 15 +#define DRM_VMW_PARAM_GL43 16 +#define DRM_VMW_PARAM_DEVICE_ID 17 /** * enum drm_vmw_handle_type - handle type for ref ioctls @@ -1236,6 +1247,44 @@ struct drm_vmw_msg_arg { __u32 receive_len; }; +/** + * struct drm_vmw_mksstat_add_arg + * + * @stat: Pointer to user-space stat-counters array, page-aligned. + * @info: Pointer to user-space counter-infos array, page-aligned. + * @strs: Pointer to user-space stat strings, page-aligned. + * @stat_len: Length in bytes of stat-counters array. + * @info_len: Length in bytes of counter-infos array. + * @strs_len: Length in bytes of the stat strings, terminators included. + * @description: Pointer to instance descriptor string; will be truncated + * to MKS_GUEST_STAT_INSTANCE_DESC_LENGTH chars. + * @id: Output identifier of the produced record; -1 if error. + * + * Argument to the DRM_VMW_MKSSTAT_ADD ioctl. + */ +struct drm_vmw_mksstat_add_arg { + __u64 stat; + __u64 info; + __u64 strs; + __u64 stat_len; + __u64 info_len; + __u64 strs_len; + __u64 description; + __u64 id; +}; + +/** + * struct drm_vmw_mksstat_remove_arg + * + * @id: Identifier of the record being disposed, originally obtained through + * DRM_VMW_MKSSTAT_ADD ioctl. + * + * Argument to the DRM_VMW_MKSSTAT_REMOVE ioctl. + */ +struct drm_vmw_mksstat_remove_arg { + __u64 id; +}; + #if defined(__cplusplus) } #endif diff --git a/linux-headers/include/linux/acct.h b/linux-headers/include/linux/acct.h index c1f7b727491..662cecf36a3 100644 --- a/linux-headers/include/linux/acct.h +++ b/linux-headers/include/linux/acct.h @@ -97,12 +97,13 @@ struct acct_v3 /* * accounting flags */ - /* bit set when the process ... */ + /* bit set when the process/task ... */ #define AFORK 0x01 /* ... executed fork, but did not exec */ #define ASU 0x02 /* ... used super-user privileges */ #define ACOMPAT 0x04 /* ... used compatibility mode (VAX only not used) */ #define ACORE 0x08 /* ... dumped core */ #define AXSIG 0x10 /* ... was killed by a signal */ +#define AGROUP 0x20 /* ... was the last task of the process (task group) */ #if defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN) #define ACCT_BYTEORDER 0x80 /* accounting file is big endian */ diff --git a/linux-headers/include/linux/acrn.h b/linux-headers/include/linux/acrn.h new file mode 100644 index 00000000000..bdcee154eee --- /dev/null +++ b/linux-headers/include/linux/acrn.h @@ -0,0 +1,649 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Userspace interface for /dev/acrn_hsm - ACRN Hypervisor Service Module + * + * This file can be used by applications that need to communicate with the HSM + * via the ioctl interface. + * + * Copyright (C) 2021 Intel Corporation. All rights reserved. + */ + +#ifndef _ACRN_H +#define _ACRN_H + +#include + +#define ACRN_IO_REQUEST_MAX 16 + +#define ACRN_IOREQ_STATE_PENDING 0 +#define ACRN_IOREQ_STATE_COMPLETE 1 +#define ACRN_IOREQ_STATE_PROCESSING 2 +#define ACRN_IOREQ_STATE_FREE 3 + +#define ACRN_IOREQ_TYPE_PORTIO 0 +#define ACRN_IOREQ_TYPE_MMIO 1 +#define ACRN_IOREQ_TYPE_PCICFG 2 + +#define ACRN_IOREQ_DIR_READ 0 +#define ACRN_IOREQ_DIR_WRITE 1 + +/** + * struct acrn_mmio_request - Info of a MMIO I/O request + * @direction: Access direction of this request (ACRN_IOREQ_DIR_*) + * @reserved: Reserved for alignment and should be 0 + * @address: Access address of this MMIO I/O request + * @size: Access size of this MMIO I/O request + * @value: Read/write value of this MMIO I/O request + */ +struct acrn_mmio_request { + __u32 direction; + __u32 reserved; + __u64 address; + __u64 size; + __u64 value; +}; + +/** + * struct acrn_pio_request - Info of a PIO I/O request + * @direction: Access direction of this request (ACRN_IOREQ_DIR_*) + * @reserved: Reserved for alignment and should be 0 + * @address: Access address of this PIO I/O request + * @size: Access size of this PIO I/O request + * @value: Read/write value of this PIO I/O request + */ +struct acrn_pio_request { + __u32 direction; + __u32 reserved; + __u64 address; + __u64 size; + __u32 value; +}; + +/** + * struct acrn_pci_request - Info of a PCI I/O request + * @direction: Access direction of this request (ACRN_IOREQ_DIR_*) + * @reserved: Reserved for alignment and should be 0 + * @size: Access size of this PCI I/O request + * @value: Read/write value of this PIO I/O request + * @bus: PCI bus value of this PCI I/O request + * @dev: PCI device value of this PCI I/O request + * @func: PCI function value of this PCI I/O request + * @reg: PCI config space offset of this PCI I/O request + * + * Need keep same header layout with &struct acrn_pio_request. + */ +struct acrn_pci_request { + __u32 direction; + __u32 reserved[3]; + __u64 size; + __u32 value; + __u32 bus; + __u32 dev; + __u32 func; + __u32 reg; +}; + +/** + * struct acrn_io_request - 256-byte ACRN I/O request + * @type: Type of this request (ACRN_IOREQ_TYPE_*). + * @completion_polling: Polling flag. Hypervisor will poll completion of the + * I/O request if this flag set. + * @reserved0: Reserved fields. + * @reqs: Union of different types of request. Byte offset: 64. + * @reqs.pio_request: PIO request data of the I/O request. + * @reqs.pci_request: PCI configuration space request data of the I/O request. + * @reqs.mmio_request: MMIO request data of the I/O request. + * @reqs.data: Raw data of the I/O request. + * @reserved1: Reserved fields. + * @kernel_handled: Flag indicates this request need be handled in kernel. + * @processed: The status of this request (ACRN_IOREQ_STATE_*). + * + * The state transitions of ACRN I/O request: + * + * FREE -> PENDING -> PROCESSING -> COMPLETE -> FREE -> ... + * + * An I/O request in COMPLETE or FREE state is owned by the hypervisor. HSM and + * ACRN userspace are in charge of processing the others. + * + * On basis of the states illustrated above, a typical lifecycle of ACRN IO + * request would look like: + * + * Flow (assume the initial state is FREE) + * | + * | Service VM vCPU 0 Service VM vCPU x User vCPU y + * | + * | hypervisor: + * | fills in type, addr, etc. + * | pauses the User VM vCPU y + * | sets the state to PENDING (a) + * | fires an upcall to Service VM + * | + * | HSM: + * | scans for PENDING requests + * | sets the states to PROCESSING (b) + * | assigns the requests to clients (c) + * V + * | client: + * | scans for the assigned requests + * | handles the requests (d) + * | HSM: + * | sets states to COMPLETE + * | notifies the hypervisor + * | + * | hypervisor: + * | resumes User VM vCPU y (e) + * | + * | hypervisor: + * | post handling (f) + * V sets states to FREE + * + * Note that the procedures (a) to (f) in the illustration above require to be + * strictly processed in the order. One vCPU cannot trigger another request of + * I/O emulation before completing the previous one. + * + * Atomic and barriers are required when HSM and hypervisor accessing the state + * of &struct acrn_io_request. + * + */ +struct acrn_io_request { + __u32 type; + __u32 completion_polling; + __u32 reserved0[14]; + union { + struct acrn_pio_request pio_request; + struct acrn_pci_request pci_request; + struct acrn_mmio_request mmio_request; + __u64 data[8]; + } reqs; + __u32 reserved1; + __u32 kernel_handled; + __u32 processed; +} __attribute__((aligned(256))); + +struct acrn_io_request_buffer { + union { + struct acrn_io_request req_slot[ACRN_IO_REQUEST_MAX]; + __u8 reserved[4096]; + }; +}; + +/** + * struct acrn_ioreq_notify - The structure of ioreq completion notification + * @vmid: User VM ID + * @reserved: Reserved and should be 0 + * @vcpu: vCPU ID + */ +struct acrn_ioreq_notify { + __u16 vmid; + __u16 reserved; + __u32 vcpu; +}; + +/** + * struct acrn_vm_creation - Info to create a User VM + * @vmid: User VM ID returned from the hypervisor + * @reserved0: Reserved and must be 0 + * @vcpu_num: Number of vCPU in the VM. Return from hypervisor. + * @reserved1: Reserved and must be 0 + * @uuid: Empty space never to be used again (used to be UUID of the VM) + * @vm_flag: Flag of the VM creating. Pass to hypervisor directly. + * @ioreq_buf: Service VM GPA of I/O request buffer. Pass to + * hypervisor directly. + * @cpu_affinity: CPU affinity of the VM. Pass to hypervisor directly. + * It's a bitmap which indicates CPUs used by the VM. + */ +struct acrn_vm_creation { + __u16 vmid; + __u16 reserved0; + __u16 vcpu_num; + __u16 reserved1; + __u8 uuid[16]; + __u64 vm_flag; + __u64 ioreq_buf; + __u64 cpu_affinity; +}; + +/** + * struct acrn_gp_regs - General registers of a User VM + * @rax: Value of register RAX + * @rcx: Value of register RCX + * @rdx: Value of register RDX + * @rbx: Value of register RBX + * @rsp: Value of register RSP + * @rbp: Value of register RBP + * @rsi: Value of register RSI + * @rdi: Value of register RDI + * @r8: Value of register R8 + * @r9: Value of register R9 + * @r10: Value of register R10 + * @r11: Value of register R11 + * @r12: Value of register R12 + * @r13: Value of register R13 + * @r14: Value of register R14 + * @r15: Value of register R15 + */ +struct acrn_gp_regs { + __le64 rax; + __le64 rcx; + __le64 rdx; + __le64 rbx; + __le64 rsp; + __le64 rbp; + __le64 rsi; + __le64 rdi; + __le64 r8; + __le64 r9; + __le64 r10; + __le64 r11; + __le64 r12; + __le64 r13; + __le64 r14; + __le64 r15; +}; + +/** + * struct acrn_descriptor_ptr - Segment descriptor table of a User VM. + * @limit: Limit field. + * @base: Base field. + * @reserved: Reserved and must be 0. + */ +struct acrn_descriptor_ptr { + __le16 limit; + __le64 base; + __le16 reserved[3]; +} __attribute__ ((__packed__)); + +/** + * struct acrn_regs - Registers structure of a User VM + * @gprs: General registers + * @gdt: Global Descriptor Table + * @idt: Interrupt Descriptor Table + * @rip: Value of register RIP + * @cs_base: Base of code segment selector + * @cr0: Value of register CR0 + * @cr4: Value of register CR4 + * @cr3: Value of register CR3 + * @ia32_efer: Value of IA32_EFER MSR + * @rflags: Value of regsiter RFLAGS + * @reserved_64: Reserved and must be 0 + * @cs_ar: Attribute field of code segment selector + * @cs_limit: Limit field of code segment selector + * @reserved_32: Reserved and must be 0 + * @cs_sel: Value of code segment selector + * @ss_sel: Value of stack segment selector + * @ds_sel: Value of data segment selector + * @es_sel: Value of extra segment selector + * @fs_sel: Value of FS selector + * @gs_sel: Value of GS selector + * @ldt_sel: Value of LDT descriptor selector + * @tr_sel: Value of TSS descriptor selector + */ +struct acrn_regs { + struct acrn_gp_regs gprs; + struct acrn_descriptor_ptr gdt; + struct acrn_descriptor_ptr idt; + + __le64 rip; + __le64 cs_base; + __le64 cr0; + __le64 cr4; + __le64 cr3; + __le64 ia32_efer; + __le64 rflags; + __le64 reserved_64[4]; + + __le32 cs_ar; + __le32 cs_limit; + __le32 reserved_32[3]; + + __le16 cs_sel; + __le16 ss_sel; + __le16 ds_sel; + __le16 es_sel; + __le16 fs_sel; + __le16 gs_sel; + __le16 ldt_sel; + __le16 tr_sel; +}; + +/** + * struct acrn_vcpu_regs - Info of vCPU registers state + * @vcpu_id: vCPU ID + * @reserved: Reserved and must be 0 + * @vcpu_regs: vCPU registers state + * + * This structure will be passed to hypervisor directly. + */ +struct acrn_vcpu_regs { + __u16 vcpu_id; + __u16 reserved[3]; + struct acrn_regs vcpu_regs; +}; + +#define ACRN_MEM_ACCESS_RIGHT_MASK 0x00000007U +#define ACRN_MEM_ACCESS_READ 0x00000001U +#define ACRN_MEM_ACCESS_WRITE 0x00000002U +#define ACRN_MEM_ACCESS_EXEC 0x00000004U +#define ACRN_MEM_ACCESS_RWX (ACRN_MEM_ACCESS_READ | \ + ACRN_MEM_ACCESS_WRITE | \ + ACRN_MEM_ACCESS_EXEC) + +#define ACRN_MEM_TYPE_MASK 0x000007C0U +#define ACRN_MEM_TYPE_WB 0x00000040U +#define ACRN_MEM_TYPE_WT 0x00000080U +#define ACRN_MEM_TYPE_UC 0x00000100U +#define ACRN_MEM_TYPE_WC 0x00000200U +#define ACRN_MEM_TYPE_WP 0x00000400U + +/* Memory mapping types */ +#define ACRN_MEMMAP_RAM 0 +#define ACRN_MEMMAP_MMIO 1 + +/** + * struct acrn_vm_memmap - A EPT memory mapping info for a User VM. + * @type: Type of the memory mapping (ACRM_MEMMAP_*). + * Pass to hypervisor directly. + * @attr: Attribute of the memory mapping. + * Pass to hypervisor directly. + * @user_vm_pa: Physical address of User VM. + * Pass to hypervisor directly. + * @service_vm_pa: Physical address of Service VM. + * Pass to hypervisor directly. + * @vma_base: VMA address of Service VM. Pass to hypervisor directly. + * @len: Length of the memory mapping. + * Pass to hypervisor directly. + */ +struct acrn_vm_memmap { + __u32 type; + __u32 attr; + __u64 user_vm_pa; + union { + __u64 service_vm_pa; + __u64 vma_base; + }; + __u64 len; +}; + +/* Type of interrupt of a passthrough device */ +#define ACRN_PTDEV_IRQ_INTX 0 +#define ACRN_PTDEV_IRQ_MSI 1 +#define ACRN_PTDEV_IRQ_MSIX 2 +/** + * struct acrn_ptdev_irq - Interrupt data of a passthrough device. + * @type: Type (ACRN_PTDEV_IRQ_*) + * @virt_bdf: Virtual Bus/Device/Function + * @phys_bdf: Physical Bus/Device/Function + * @intx: Info of interrupt + * @intx.virt_pin: Virtual IOAPIC pin + * @intx.phys_pin: Physical IOAPIC pin + * @intx.is_pic_pin: Is PIC pin or not + * + * This structure will be passed to hypervisor directly. + */ +struct acrn_ptdev_irq { + __u32 type; + __u16 virt_bdf; + __u16 phys_bdf; + + struct { + __u32 virt_pin; + __u32 phys_pin; + __u32 is_pic_pin; + } intx; +}; + +/* Type of PCI device assignment */ +#define ACRN_PTDEV_QUIRK_ASSIGN (1U << 0) + +#define ACRN_MMIODEV_RES_NUM 3 +#define ACRN_PCI_NUM_BARS 6 +/** + * struct acrn_pcidev - Info for assigning or de-assigning a PCI device + * @type: Type of the assignment + * @virt_bdf: Virtual Bus/Device/Function + * @phys_bdf: Physical Bus/Device/Function + * @intr_line: PCI interrupt line + * @intr_pin: PCI interrupt pin + * @bar: PCI BARs. + * + * This structure will be passed to hypervisor directly. + */ +struct acrn_pcidev { + __u32 type; + __u16 virt_bdf; + __u16 phys_bdf; + __u8 intr_line; + __u8 intr_pin; + __u32 bar[ACRN_PCI_NUM_BARS]; +}; + +/** + * struct acrn_mmiodev - Info for assigning or de-assigning a MMIO device + * @name: Name of the MMIO device. + * @res[].user_vm_pa: Physical address of User VM of the MMIO region + * for the MMIO device. + * @res[].service_vm_pa: Physical address of Service VM of the MMIO + * region for the MMIO device. + * @res[].size: Size of the MMIO region for the MMIO device. + * @res[].mem_type: Memory type of the MMIO region for the MMIO + * device. + * + * This structure will be passed to hypervisor directly. + */ +struct acrn_mmiodev { + __u8 name[8]; + struct { + __u64 user_vm_pa; + __u64 service_vm_pa; + __u64 size; + __u64 mem_type; + } res[ACRN_MMIODEV_RES_NUM]; +}; + +/** + * struct acrn_vdev - Info for creating or destroying a virtual device + * @id: Union of identifier of the virtual device + * @id.value: Raw data of the identifier + * @id.fields.vendor: Vendor id of the virtual PCI device + * @id.fields.device: Device id of the virtual PCI device + * @id.fields.legacy_id: ID of the virtual device if not a PCI device + * @slot: Virtual Bus/Device/Function of the virtual + * device + * @io_base: IO resource base address of the virtual device + * @io_size: IO resource size of the virtual device + * @args: Arguments for the virtual device creation + * + * The created virtual device can be a PCI device or a legacy device (e.g. + * a virtual UART controller) and it is emulated by the hypervisor. This + * structure will be passed to hypervisor directly. + */ +struct acrn_vdev { + /* + * the identifier of the device, the low 32 bits represent the vendor + * id and device id of PCI device and the high 32 bits represent the + * device number of the legacy device + */ + union { + __u64 value; + struct { + __le16 vendor; + __le16 device; + __le32 legacy_id; + } fields; + } id; + + __u64 slot; + __u32 io_addr[ACRN_PCI_NUM_BARS]; + __u32 io_size[ACRN_PCI_NUM_BARS]; + __u8 args[128]; +}; + +/** + * struct acrn_msi_entry - Info for injecting a MSI interrupt to a VM + * @msi_addr: MSI addr[19:12] with dest vCPU ID + * @msi_data: MSI data[7:0] with vector + */ +struct acrn_msi_entry { + __u64 msi_addr; + __u64 msi_data; +}; + +struct acrn_acpi_generic_address { + __u8 space_id; + __u8 bit_width; + __u8 bit_offset; + __u8 access_size; + __u64 address; +} __attribute__ ((__packed__)); + +/** + * struct acrn_cstate_data - A C state package defined in ACPI + * @cx_reg: Register of the C state object + * @type: Type of the C state object + * @latency: The worst-case latency to enter and exit this C state + * @power: The average power consumption when in this C state + */ +struct acrn_cstate_data { + struct acrn_acpi_generic_address cx_reg; + __u8 type; + __u32 latency; + __u64 power; +}; + +/** + * struct acrn_pstate_data - A P state package defined in ACPI + * @core_frequency: CPU frequency (in MHz). + * @power: Power dissipation (in milliwatts). + * @transition_latency: The worst-case latency in microseconds that CPU is + * unavailable during a transition from any P state to + * this P state. + * @bus_master_latency: The worst-case latency in microseconds that Bus Masters + * are prevented from accessing memory during a transition + * from any P state to this P state. + * @control: The value to be written to Performance Control Register + * @status: Transition status. + */ +struct acrn_pstate_data { + __u64 core_frequency; + __u64 power; + __u64 transition_latency; + __u64 bus_master_latency; + __u64 control; + __u64 status; +}; + +#define PMCMD_TYPE_MASK 0x000000ff +enum acrn_pm_cmd_type { + ACRN_PMCMD_GET_PX_CNT, + ACRN_PMCMD_GET_PX_DATA, + ACRN_PMCMD_GET_CX_CNT, + ACRN_PMCMD_GET_CX_DATA, +}; + +#define ACRN_IOEVENTFD_FLAG_PIO 0x01 +#define ACRN_IOEVENTFD_FLAG_DATAMATCH 0x02 +#define ACRN_IOEVENTFD_FLAG_DEASSIGN 0x04 +/** + * struct acrn_ioeventfd - Data to operate a &struct hsm_ioeventfd + * @fd: The fd of eventfd associated with a hsm_ioeventfd + * @flags: Logical-OR of ACRN_IOEVENTFD_FLAG_* + * @addr: The start address of IO range of ioeventfd + * @len: The length of IO range of ioeventfd + * @reserved: Reserved and should be 0 + * @data: Data for data matching + * + * Without flag ACRN_IOEVENTFD_FLAG_DEASSIGN, ioctl ACRN_IOCTL_IOEVENTFD + * creates a &struct hsm_ioeventfd with properties originated from &struct + * acrn_ioeventfd. With flag ACRN_IOEVENTFD_FLAG_DEASSIGN, ioctl + * ACRN_IOCTL_IOEVENTFD destroys the &struct hsm_ioeventfd matching the fd. + */ +struct acrn_ioeventfd { + __u32 fd; + __u32 flags; + __u64 addr; + __u32 len; + __u32 reserved; + __u64 data; +}; + +#define ACRN_IRQFD_FLAG_DEASSIGN 0x01 +/** + * struct acrn_irqfd - Data to operate a &struct hsm_irqfd + * @fd: The fd of eventfd associated with a hsm_irqfd + * @flags: Logical-OR of ACRN_IRQFD_FLAG_* + * @msi: Info of MSI associated with the irqfd + */ +struct acrn_irqfd { + __s32 fd; + __u32 flags; + struct acrn_msi_entry msi; +}; + +/* The ioctl type, documented in ioctl-number.rst */ +#define ACRN_IOCTL_TYPE 0xA2 + +/* + * Common IOCTL IDs definition for ACRN userspace + */ +#define ACRN_IOCTL_CREATE_VM \ + _IOWR(ACRN_IOCTL_TYPE, 0x10, struct acrn_vm_creation) +#define ACRN_IOCTL_DESTROY_VM \ + _IO(ACRN_IOCTL_TYPE, 0x11) +#define ACRN_IOCTL_START_VM \ + _IO(ACRN_IOCTL_TYPE, 0x12) +#define ACRN_IOCTL_PAUSE_VM \ + _IO(ACRN_IOCTL_TYPE, 0x13) +#define ACRN_IOCTL_RESET_VM \ + _IO(ACRN_IOCTL_TYPE, 0x15) +#define ACRN_IOCTL_SET_VCPU_REGS \ + _IOW(ACRN_IOCTL_TYPE, 0x16, struct acrn_vcpu_regs) + +#define ACRN_IOCTL_INJECT_MSI \ + _IOW(ACRN_IOCTL_TYPE, 0x23, struct acrn_msi_entry) +#define ACRN_IOCTL_VM_INTR_MONITOR \ + _IOW(ACRN_IOCTL_TYPE, 0x24, unsigned long) +#define ACRN_IOCTL_SET_IRQLINE \ + _IOW(ACRN_IOCTL_TYPE, 0x25, __u64) + +#define ACRN_IOCTL_NOTIFY_REQUEST_FINISH \ + _IOW(ACRN_IOCTL_TYPE, 0x31, struct acrn_ioreq_notify) +#define ACRN_IOCTL_CREATE_IOREQ_CLIENT \ + _IO(ACRN_IOCTL_TYPE, 0x32) +#define ACRN_IOCTL_ATTACH_IOREQ_CLIENT \ + _IO(ACRN_IOCTL_TYPE, 0x33) +#define ACRN_IOCTL_DESTROY_IOREQ_CLIENT \ + _IO(ACRN_IOCTL_TYPE, 0x34) +#define ACRN_IOCTL_CLEAR_VM_IOREQ \ + _IO(ACRN_IOCTL_TYPE, 0x35) + +#define ACRN_IOCTL_SET_MEMSEG \ + _IOW(ACRN_IOCTL_TYPE, 0x41, struct acrn_vm_memmap) +#define ACRN_IOCTL_UNSET_MEMSEG \ + _IOW(ACRN_IOCTL_TYPE, 0x42, struct acrn_vm_memmap) + +#define ACRN_IOCTL_SET_PTDEV_INTR \ + _IOW(ACRN_IOCTL_TYPE, 0x53, struct acrn_ptdev_irq) +#define ACRN_IOCTL_RESET_PTDEV_INTR \ + _IOW(ACRN_IOCTL_TYPE, 0x54, struct acrn_ptdev_irq) +#define ACRN_IOCTL_ASSIGN_PCIDEV \ + _IOW(ACRN_IOCTL_TYPE, 0x55, struct acrn_pcidev) +#define ACRN_IOCTL_DEASSIGN_PCIDEV \ + _IOW(ACRN_IOCTL_TYPE, 0x56, struct acrn_pcidev) +#define ACRN_IOCTL_ASSIGN_MMIODEV \ + _IOW(ACRN_IOCTL_TYPE, 0x57, struct acrn_mmiodev) +#define ACRN_IOCTL_DEASSIGN_MMIODEV \ + _IOW(ACRN_IOCTL_TYPE, 0x58, struct acrn_mmiodev) +#define ACRN_IOCTL_CREATE_VDEV \ + _IOW(ACRN_IOCTL_TYPE, 0x59, struct acrn_vdev) +#define ACRN_IOCTL_DESTROY_VDEV \ + _IOW(ACRN_IOCTL_TYPE, 0x5A, struct acrn_vdev) + +#define ACRN_IOCTL_PM_GET_CPU_STATE \ + _IOWR(ACRN_IOCTL_TYPE, 0x60, __u64) + +#define ACRN_IOCTL_IOEVENTFD \ + _IOW(ACRN_IOCTL_TYPE, 0x70, struct acrn_ioeventfd) +#define ACRN_IOCTL_IRQFD \ + _IOW(ACRN_IOCTL_TYPE, 0x71, struct acrn_irqfd) + +#endif /* _ACRN_H */ diff --git a/linux-headers/include/linux/affs_hardblocks.h b/linux-headers/include/linux/affs_hardblocks.h index 5e2fb848125..a5aff2eb5f7 100644 --- a/linux-headers/include/linux/affs_hardblocks.h +++ b/linux-headers/include/linux/affs_hardblocks.h @@ -7,42 +7,42 @@ /* Just the needed definitions for the RDB of an Amiga HD. */ struct RigidDiskBlock { - __u32 rdb_ID; + __be32 rdb_ID; __be32 rdb_SummedLongs; - __s32 rdb_ChkSum; - __u32 rdb_HostID; + __be32 rdb_ChkSum; + __be32 rdb_HostID; __be32 rdb_BlockBytes; - __u32 rdb_Flags; - __u32 rdb_BadBlockList; + __be32 rdb_Flags; + __be32 rdb_BadBlockList; __be32 rdb_PartitionList; - __u32 rdb_FileSysHeaderList; - __u32 rdb_DriveInit; - __u32 rdb_Reserved1[6]; - __u32 rdb_Cylinders; - __u32 rdb_Sectors; - __u32 rdb_Heads; - __u32 rdb_Interleave; - __u32 rdb_Park; - __u32 rdb_Reserved2[3]; - __u32 rdb_WritePreComp; - __u32 rdb_ReducedWrite; - __u32 rdb_StepRate; - __u32 rdb_Reserved3[5]; - __u32 rdb_RDBBlocksLo; - __u32 rdb_RDBBlocksHi; - __u32 rdb_LoCylinder; - __u32 rdb_HiCylinder; - __u32 rdb_CylBlocks; - __u32 rdb_AutoParkSeconds; - __u32 rdb_HighRDSKBlock; - __u32 rdb_Reserved4; + __be32 rdb_FileSysHeaderList; + __be32 rdb_DriveInit; + __be32 rdb_Reserved1[6]; + __be32 rdb_Cylinders; + __be32 rdb_Sectors; + __be32 rdb_Heads; + __be32 rdb_Interleave; + __be32 rdb_Park; + __be32 rdb_Reserved2[3]; + __be32 rdb_WritePreComp; + __be32 rdb_ReducedWrite; + __be32 rdb_StepRate; + __be32 rdb_Reserved3[5]; + __be32 rdb_RDBBlocksLo; + __be32 rdb_RDBBlocksHi; + __be32 rdb_LoCylinder; + __be32 rdb_HiCylinder; + __be32 rdb_CylBlocks; + __be32 rdb_AutoParkSeconds; + __be32 rdb_HighRDSKBlock; + __be32 rdb_Reserved4; char rdb_DiskVendor[8]; char rdb_DiskProduct[16]; char rdb_DiskRevision[4]; char rdb_ControllerVendor[8]; char rdb_ControllerProduct[16]; char rdb_ControllerRevision[4]; - __u32 rdb_Reserved5[10]; + __be32 rdb_Reserved5[10]; }; #define IDNAME_RIGIDDISK 0x5244534B /* "RDSK" */ @@ -50,16 +50,16 @@ struct RigidDiskBlock { struct PartitionBlock { __be32 pb_ID; __be32 pb_SummedLongs; - __s32 pb_ChkSum; - __u32 pb_HostID; + __be32 pb_ChkSum; + __be32 pb_HostID; __be32 pb_Next; - __u32 pb_Flags; - __u32 pb_Reserved1[2]; - __u32 pb_DevFlags; + __be32 pb_Flags; + __be32 pb_Reserved1[2]; + __be32 pb_DevFlags; __u8 pb_DriveName[32]; - __u32 pb_Reserved2[15]; + __be32 pb_Reserved2[15]; __be32 pb_Environment[17]; - __u32 pb_EReserved[15]; + __be32 pb_EReserved[15]; }; #define IDNAME_PARTITION 0x50415254 /* "PART" */ diff --git a/linux-headers/include/linux/agpgart.h b/linux-headers/include/linux/agpgart.h index cee0ec7dfb4..0964a391d41 100644 --- a/linux-headers/include/linux/agpgart.h +++ b/linux-headers/include/linux/agpgart.h @@ -51,7 +51,6 @@ #endif #include -#include struct agp_version { __u16 major; @@ -63,10 +62,10 @@ typedef struct _agp_info { __u32 bridge_id; /* bridge vendor/device */ __u32 agp_mode; /* mode info of bridge */ unsigned long aper_base;/* base of aperture */ - size_t aper_size; /* size of aperture */ - size_t pg_total; /* max pages (swap + system) */ - size_t pg_system; /* max pages (system) */ - size_t pg_used; /* current pages used */ + __kernel_size_t aper_size; /* size of aperture */ + __kernel_size_t pg_total; /* max pages (swap + system) */ + __kernel_size_t pg_system; /* max pages (system) */ + __kernel_size_t pg_used; /* current pages used */ } agp_info; typedef struct _agp_setup { diff --git a/linux-headers/include/linux/amt.h b/linux-headers/include/linux/amt.h new file mode 100644 index 00000000000..32aa2a024a6 --- /dev/null +++ b/linux-headers/include/linux/amt.h @@ -0,0 +1,62 @@ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ +/* + * Copyright (c) 2021 Taehee Yoo + */ +#ifndef _AMT_H_ +#define _AMT_H_ + +enum ifla_amt_mode { + /* AMT interface works as Gateway mode. + * The Gateway mode encapsulates IGMP/MLD traffic and decapsulates + * multicast traffic. + */ + AMT_MODE_GATEWAY = 0, + /* AMT interface works as Relay mode. + * The Relay mode encapsulates multicast traffic and decapsulates + * IGMP/MLD traffic. + */ + AMT_MODE_RELAY, + __AMT_MODE_MAX, +}; + +#define AMT_MODE_MAX (__AMT_MODE_MAX - 1) + +enum { + IFLA_AMT_UNSPEC, + /* This attribute specify mode etier Gateway or Relay. */ + IFLA_AMT_MODE, + /* This attribute specify Relay port. + * AMT interface is created as Gateway mode, this attribute is used + * to specify relay(remote) port. + * AMT interface is created as Relay mode, this attribute is used + * as local port. + */ + IFLA_AMT_RELAY_PORT, + /* This attribute specify Gateway port. + * AMT interface is created as Gateway mode, this attribute is used + * as local port. + * AMT interface is created as Relay mode, this attribute is not used. + */ + IFLA_AMT_GATEWAY_PORT, + /* This attribute specify physical device */ + IFLA_AMT_LINK, + /* This attribute specify local ip address */ + IFLA_AMT_LOCAL_IP, + /* This attribute specify Relay ip address. + * So, this is not used by Relay. + */ + IFLA_AMT_REMOTE_IP, + /* This attribute specify Discovery ip address. + * When Gateway get started, it send discovery message to find the + * Relay's ip address. + * So, this is not used by Relay. + */ + IFLA_AMT_DISCOVERY_IP, + /* This attribute specify number of maximum tunnel. */ + IFLA_AMT_MAX_TUNNELS, + __IFLA_AMT_MAX, +}; + +#define IFLA_AMT_MAX (__IFLA_AMT_MAX - 1) + +#endif /* _AMT_H_ */ diff --git a/linux-headers/include/linux/android/binder.h b/linux-headers/include/linux/android/binder.h index 6cfc48c13e8..4121c3bc2ac 100644 --- a/linux-headers/include/linux/android/binder.h +++ b/linux-headers/include/linux/android/binder.h @@ -217,6 +217,40 @@ struct binder_node_info_for_ref { __u32 reserved3; }; +struct binder_freeze_info { + __u32 pid; + __u32 enable; + __u32 timeout_ms; +}; + +struct binder_frozen_status_info { + __u32 pid; + + /* process received sync transactions since last frozen + * bit 0: received sync transaction after being frozen + * bit 1: new pending sync transaction during freezing + */ + __u32 sync_recv; + + /* process received async transactions since last frozen */ + __u32 async_recv; +}; + +/* struct binder_extened_error - extended error information + * @id: identifier for the failed operation + * @command: command as defined by binder_driver_return_protocol + * @param: parameter holding a negative errno value + * + * Used with BINDER_GET_EXTENDED_ERROR. This extends the error information + * returned by the driver upon a failed operation. Userspace can pull this + * data to properly handle specific error scenarios. + */ +struct binder_extended_error { + __u32 id; + __u32 command; + __s32 param; +}; + #define BINDER_WRITE_READ _IOWR('b', 1, struct binder_write_read) #define BINDER_SET_IDLE_TIMEOUT _IOW('b', 3, __s64) #define BINDER_SET_MAX_THREADS _IOW('b', 5, __u32) @@ -227,6 +261,10 @@ struct binder_node_info_for_ref { #define BINDER_GET_NODE_DEBUG_INFO _IOWR('b', 11, struct binder_node_debug_info) #define BINDER_GET_NODE_INFO_FOR_REF _IOWR('b', 12, struct binder_node_info_for_ref) #define BINDER_SET_CONTEXT_MGR_EXT _IOW('b', 13, struct flat_binder_object) +#define BINDER_FREEZE _IOW('b', 14, struct binder_freeze_info) +#define BINDER_GET_FROZEN_INFO _IOWR('b', 15, struct binder_frozen_status_info) +#define BINDER_ENABLE_ONEWAY_SPAM_DETECTION _IOW('b', 16, __u32) +#define BINDER_GET_EXTENDED_ERROR _IOWR('b', 17, struct binder_extended_error) /* * NOTE: Two special error codes you should check for when calling @@ -249,6 +287,7 @@ enum transaction_flags { TF_STATUS_CODE = 0x08, /* contents are a 32-bit status code */ TF_ACCEPT_FDS = 0x10, /* allow replies with file descriptors */ TF_CLEAR_BUF = 0x20, /* clear buffer on txn complete */ + TF_UPDATE_TXN = 0x40, /* update the outdated pending async txn */ }; struct binder_transaction_data { @@ -266,8 +305,8 @@ struct binder_transaction_data { /* General information about the transaction. */ __u32 flags; - pid_t sender_pid; - uid_t sender_euid; + __kernel_pid_t sender_pid; + __kernel_uid32_t sender_euid; binder_size_t data_size; /* number of bytes of data */ binder_size_t offsets_size; /* number of bytes of offsets */ @@ -408,6 +447,24 @@ enum binder_driver_return_protocol { * The last transaction (either a bcTRANSACTION or * a bcATTEMPT_ACQUIRE) failed (e.g. out of memory). No parameters. */ + + BR_FROZEN_REPLY = _IO('r', 18), + /* + * The target of the last sync transaction (either a bcTRANSACTION or + * a bcATTEMPT_ACQUIRE) is frozen. No parameters. + */ + + BR_ONEWAY_SPAM_SUSPECT = _IO('r', 19), + /* + * Current process sent too many oneway calls to target, and the last + * asynchronous transaction makes the allocated async buffer size exceed + * detection threshold. No parameters. + */ + + BR_TRANSACTION_PENDING_FROZEN = _IO('r', 20), + /* + * The target of the last async transaction is frozen. No parameters. + */ }; enum binder_driver_command_protocol { diff --git a/linux-headers/include/linux/aspeed-video.h b/linux-headers/include/linux/aspeed-video.h new file mode 100644 index 00000000000..a2321e16d4a --- /dev/null +++ b/linux-headers/include/linux/aspeed-video.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * Copyright (C) 2021 ASPEED Technology Inc. + */ + +#ifndef _LINUX_ASPEED_VIDEO_H +#define _LINUX_ASPEED_VIDEO_H + +#include + +#define V4L2_CID_ASPEED_HQ_MODE (V4L2_CID_USER_ASPEED_BASE + 1) +#define V4L2_CID_ASPEED_HQ_JPEG_QUALITY (V4L2_CID_USER_ASPEED_BASE + 2) + +#endif /* _LINUX_ASPEED_VIDEO_H */ diff --git a/linux-headers/include/linux/atmbr2684.h b/linux-headers/include/linux/atmbr2684.h index a9e2250cd72..d47c47d06f1 100644 --- a/linux-headers/include/linux/atmbr2684.h +++ b/linux-headers/include/linux/atmbr2684.h @@ -38,7 +38,7 @@ */ #define BR2684_ENCAPS_VC (0) /* VC-mux */ #define BR2684_ENCAPS_LLC (1) -#define BR2684_ENCAPS_AUTODETECT (2) /* Unsuported */ +#define BR2684_ENCAPS_AUTODETECT (2) /* Unsupported */ /* * Is this VC bridged or routed? diff --git a/linux-headers/include/linux/atmdev.h b/linux-headers/include/linux/atmdev.h index 9bdb96a4bbe..c95786e949a 100644 --- a/linux-headers/include/linux/atmdev.h +++ b/linux-headers/include/linux/atmdev.h @@ -101,10 +101,6 @@ struct atm_dev_stats { /* use backend to make new if */ #define ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf) /* add party to p2mp call */ -#ifdef CONFIG_COMPAT -/* It actually takes struct sockaddr_atmsvc, not struct atm_iobuf */ -#define COMPAT_ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct compat_atm_iobuf) -#endif #define ATM_DROPPARTY _IOW('a', ATMIOC_SPECIAL+5,int) /* drop party from p2mp call */ diff --git a/linux-headers/include/linux/audit.h b/linux-headers/include/linux/audit.h index fe6a12a792a..6c435ffcd80 100644 --- a/linux-headers/include/linux/audit.h +++ b/linux-headers/include/linux/audit.h @@ -48,7 +48,7 @@ * 2500 - 2999 future user space (maybe integrity labels and related events) * * Messages from 1000-1199 are bi-directional. 1200-1299 & 2100 - 2999 are - * exclusively user space. 1300-2099 is kernel --> user space + * exclusively user space. 1300-2099 is kernel --> user space * communication. */ #define AUDIT_GET 1000 /* Get status */ @@ -78,7 +78,7 @@ #define AUDIT_LAST_USER_MSG 1199 #define AUDIT_FIRST_USER_MSG2 2100 /* More user space messages */ #define AUDIT_LAST_USER_MSG2 2999 - + #define AUDIT_DAEMON_START 1200 /* Daemon startup record */ #define AUDIT_DAEMON_END 1201 /* Daemon normal stop record */ #define AUDIT_DAEMON_ABORT 1202 /* Daemon error stop record */ @@ -118,6 +118,10 @@ #define AUDIT_TIME_ADJNTPVAL 1333 /* NTP value adjustment */ #define AUDIT_BPF 1334 /* BPF subsystem */ #define AUDIT_EVENT_LISTENER 1335 /* Task joined multicast read socket */ +#define AUDIT_URINGOP 1336 /* io_uring operation */ +#define AUDIT_OPENAT2 1337 /* Record showing openat2 how args */ +#define AUDIT_DM_CTRL 1338 /* Device Mapper target control */ +#define AUDIT_DM_EVENT 1339 /* Device Mapper events */ #define AUDIT_AVC 1400 /* SE Linux avc denial or grant */ #define AUDIT_SELINUX_ERR 1401 /* Internal SE Linux Errors */ @@ -166,8 +170,9 @@ #define AUDIT_FILTER_EXCLUDE 0x05 /* Apply rule before record creation */ #define AUDIT_FILTER_TYPE AUDIT_FILTER_EXCLUDE /* obsolete misleading naming */ #define AUDIT_FILTER_FS 0x06 /* Apply rule at __audit_inode_child */ +#define AUDIT_FILTER_URING_EXIT 0x07 /* Apply rule at io_uring op exit */ -#define AUDIT_NR_FILTERS 7 +#define AUDIT_NR_FILTERS 8 #define AUDIT_FILTER_PREPEND 0x10 /* Prepend to front of list */ @@ -182,7 +187,7 @@ #define AUDIT_MAX_KEY_LEN 256 #define AUDIT_BITMASK_SIZE 64 #define AUDIT_WORD(nr) ((__u32)((nr)/32)) -#define AUDIT_BIT(nr) (1 << ((nr) - AUDIT_WORD(nr)*32)) +#define AUDIT_BIT(nr) (1U << ((nr) - AUDIT_WORD(nr)*32)) #define AUDIT_SYSCALL_CLASSES 16 #define AUDIT_CLASS_DIR_WRITE 0 @@ -434,6 +439,8 @@ enum { #define AUDIT_ARCH_UNICORE (EM_UNICORE|__AUDIT_ARCH_LE) #define AUDIT_ARCH_X86_64 (EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) #define AUDIT_ARCH_XTENSA (EM_XTENSA) +#define AUDIT_ARCH_LOONGARCH32 (EM_LOONGARCH|__AUDIT_ARCH_LE) +#define AUDIT_ARCH_LOONGARCH64 (EM_LOONGARCH|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) #define AUDIT_PERM_EXEC 1 #define AUDIT_PERM_WRITE 2 @@ -509,7 +516,7 @@ struct audit_rule_data { __u32 values[AUDIT_MAX_FIELDS]; __u32 fieldflags[AUDIT_MAX_FIELDS]; __u32 buflen; /* total length of string fields */ - char buf[0]; /* string fields buffer */ + char buf[]; /* string fields buffer */ }; #endif /* _LINUX_AUDIT_H_ */ diff --git a/linux-headers/include/linux/auto_dev-ioctl.h b/linux-headers/include/linux/auto_dev-ioctl.h index 4c9e8d17fd7..eb25495c263 100644 --- a/linux-headers/include/linux/auto_dev-ioctl.h +++ b/linux-headers/include/linux/auto_dev-ioctl.h @@ -109,7 +109,7 @@ struct autofs_dev_ioctl { struct args_ismountpoint ismountpoint; }; - char path[0]; + char path[]; }; static __inline__ void init_autofs_dev_ioctl(struct autofs_dev_ioctl *in) diff --git a/linux-headers/include/linux/auxvec.h b/linux-headers/include/linux/auxvec.h index e2888df5897..449ff945520 100644 --- a/linux-headers/include/linux/auxvec.h +++ b/linux-headers/include/linux/auxvec.h @@ -30,8 +30,13 @@ * differ from AT_PLATFORM. */ #define AT_RANDOM 25 /* address of 16 random bytes */ #define AT_HWCAP2 26 /* extension of AT_HWCAP */ +#define AT_RSEQ_FEATURE_SIZE 27 /* rseq supported feature size */ +#define AT_RSEQ_ALIGN 28 /* rseq allocation alignment */ #define AT_EXECFN 31 /* filename of program */ +#ifndef AT_MINSIGSTKSZ +#define AT_MINSIGSTKSZ 51 /* minimal stack size for signal delivery */ +#endif #endif /* _LINUX_AUXVEC_H */ diff --git a/linux-headers/include/linux/batadv_packet.h b/linux-headers/include/linux/batadv_packet.h index df55c8394e7..116533b574b 100644 --- a/linux-headers/include/linux/batadv_packet.h +++ b/linux-headers/include/linux/batadv_packet.h @@ -1,5 +1,5 @@ /* SPDX-License-Identifier: (GPL-2.0 WITH Linux-syscall-note) */ -/* Copyright (C) 2007-2020 B.A.T.M.A.N. contributors: +/* Copyright (C) B.A.T.M.A.N. contributors: * * Marek Lindner, Simon Wunderlich */ @@ -26,6 +26,7 @@ * @BATADV_CODED: network coded packets * @BATADV_ELP: echo location packets for B.A.T.M.A.N. V * @BATADV_OGM2: originator messages for B.A.T.M.A.N. V + * @BATADV_MCAST: multicast packet with multiple destination addresses * * @BATADV_UNICAST: unicast packets carrying unicast payload traffic * @BATADV_UNICAST_FRAG: unicast packets carrying a fragment of the original @@ -42,6 +43,7 @@ enum batadv_packettype { BATADV_CODED = 0x02, BATADV_ELP = 0x03, BATADV_OGM2 = 0x04, + BATADV_MCAST = 0x05, /* 0x40 - 0x7f: unicast */ #define BATADV_UNICAST_MIN 0x40 BATADV_UNICAST = 0x40, diff --git a/linux-headers/include/linux/batman_adv.h b/linux-headers/include/linux/batman_adv.h index 052a68dafd0..ebe21775a79 100644 --- a/linux-headers/include/linux/batman_adv.h +++ b/linux-headers/include/linux/batman_adv.h @@ -1,5 +1,5 @@ /* SPDX-License-Identifier: MIT */ -/* Copyright (C) 2016-2020 B.A.T.M.A.N. contributors: +/* Copyright (C) B.A.T.M.A.N. contributors: * * Matthias Schiffer */ @@ -675,4 +675,30 @@ enum batadv_tp_meter_reason { BATADV_TP_REASON_TOO_MANY = 133, }; +/** + * enum batadv_ifla_attrs - batman-adv ifla nested attributes + */ +enum batadv_ifla_attrs { + /** + * @IFLA_BATADV_UNSPEC: unspecified attribute which is not parsed by + * rtnetlink + */ + IFLA_BATADV_UNSPEC, + + /** + * @IFLA_BATADV_ALGO_NAME: routing algorithm (name) which should be + * used by the newly registered batadv net_device. + */ + IFLA_BATADV_ALGO_NAME, + + /* add attributes above here, update the policy in soft-interface.c */ + + /** + * @__IFLA_BATADV_MAX: internal use + */ + __IFLA_BATADV_MAX, +}; + +#define IFLA_BATADV_MAX (__IFLA_BATADV_MAX - 1) + #endif /* _LINUX_BATMAN_ADV_H_ */ diff --git a/linux-headers/include/linux/bcache.h b/linux-headers/include/linux/bcache.h deleted file mode 100644 index f2cd5ed5a7c..00000000000 --- a/linux-headers/include/linux/bcache.h +++ /dev/null @@ -1,445 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _LINUX_BCACHE_H -#define _LINUX_BCACHE_H - -/* - * Bcache on disk data structures - */ - -#include - -#define BITMASK(name, type, field, offset, size) \ -static __inline__ __u64 name(const type *k) \ -{ return (k->field >> offset) & ~(~0ULL << size); } \ - \ -static __inline__ void SET_##name(type *k, __u64 v) \ -{ \ - k->field &= ~(~(~0ULL << size) << offset); \ - k->field |= (v & ~(~0ULL << size)) << offset; \ -} - -/* Btree keys - all units are in sectors */ - -struct bkey { - __u64 high; - __u64 low; - __u64 ptr[]; -}; - -#define KEY_FIELD(name, field, offset, size) \ - BITMASK(name, struct bkey, field, offset, size) - -#define PTR_FIELD(name, offset, size) \ -static __inline__ __u64 name(const struct bkey *k, unsigned int i) \ -{ return (k->ptr[i] >> offset) & ~(~0ULL << size); } \ - \ -static __inline__ void SET_##name(struct bkey *k, unsigned int i, __u64 v) \ -{ \ - k->ptr[i] &= ~(~(~0ULL << size) << offset); \ - k->ptr[i] |= (v & ~(~0ULL << size)) << offset; \ -} - -#define KEY_SIZE_BITS 16 -#define KEY_MAX_U64S 8 - -KEY_FIELD(KEY_PTRS, high, 60, 3) -KEY_FIELD(HEADER_SIZE, high, 58, 2) -KEY_FIELD(KEY_CSUM, high, 56, 2) -KEY_FIELD(KEY_PINNED, high, 55, 1) -KEY_FIELD(KEY_DIRTY, high, 36, 1) - -KEY_FIELD(KEY_SIZE, high, 20, KEY_SIZE_BITS) -KEY_FIELD(KEY_INODE, high, 0, 20) - -/* Next time I change the on disk format, KEY_OFFSET() won't be 64 bits */ - -static __inline__ __u64 KEY_OFFSET(const struct bkey *k) -{ - return k->low; -} - -static __inline__ void SET_KEY_OFFSET(struct bkey *k, __u64 v) -{ - k->low = v; -} - -/* - * The high bit being set is a relic from when we used it to do binary - * searches - it told you where a key started. It's not used anymore, - * and can probably be safely dropped. - */ -#define KEY(inode, offset, size) \ -((struct bkey) { \ - .high = (1ULL << 63) | ((__u64) (size) << 20) | (inode), \ - .low = (offset) \ -}) - -#define ZERO_KEY KEY(0, 0, 0) - -#define MAX_KEY_INODE (~(~0 << 20)) -#define MAX_KEY_OFFSET (~0ULL >> 1) -#define MAX_KEY KEY(MAX_KEY_INODE, MAX_KEY_OFFSET, 0) - -#define KEY_START(k) (KEY_OFFSET(k) - KEY_SIZE(k)) -#define START_KEY(k) KEY(KEY_INODE(k), KEY_START(k), 0) - -#define PTR_DEV_BITS 12 - -PTR_FIELD(PTR_DEV, 51, PTR_DEV_BITS) -PTR_FIELD(PTR_OFFSET, 8, 43) -PTR_FIELD(PTR_GEN, 0, 8) - -#define PTR_CHECK_DEV ((1 << PTR_DEV_BITS) - 1) - -#define MAKE_PTR(gen, offset, dev) \ - ((((__u64) dev) << 51) | ((__u64) offset) << 8 | gen) - -/* Bkey utility code */ - -static __inline__ unsigned long bkey_u64s(const struct bkey *k) -{ - return (sizeof(struct bkey) / sizeof(__u64)) + KEY_PTRS(k); -} - -static __inline__ unsigned long bkey_bytes(const struct bkey *k) -{ - return bkey_u64s(k) * sizeof(__u64); -} - -#define bkey_copy(_dest, _src) memcpy(_dest, _src, bkey_bytes(_src)) - -static __inline__ void bkey_copy_key(struct bkey *dest, const struct bkey *src) -{ - SET_KEY_INODE(dest, KEY_INODE(src)); - SET_KEY_OFFSET(dest, KEY_OFFSET(src)); -} - -static __inline__ struct bkey *bkey_next(const struct bkey *k) -{ - __u64 *d = (void *) k; - - return (struct bkey *) (d + bkey_u64s(k)); -} - -static __inline__ struct bkey *bkey_idx(const struct bkey *k, unsigned int nr_keys) -{ - __u64 *d = (void *) k; - - return (struct bkey *) (d + nr_keys); -} -/* Enough for a key with 6 pointers */ -#define BKEY_PAD 8 - -#define BKEY_PADDED(key) \ - union { struct bkey key; __u64 key ## _pad[BKEY_PAD]; } - -/* Superblock */ - -/* Version 0: Cache device - * Version 1: Backing device - * Version 2: Seed pointer into btree node checksum - * Version 3: Cache device with new UUID format - * Version 4: Backing device with data offset - */ -#define BCACHE_SB_VERSION_CDEV 0 -#define BCACHE_SB_VERSION_BDEV 1 -#define BCACHE_SB_VERSION_CDEV_WITH_UUID 3 -#define BCACHE_SB_VERSION_BDEV_WITH_OFFSET 4 -#define BCACHE_SB_VERSION_CDEV_WITH_FEATURES 5 -#define BCACHE_SB_VERSION_BDEV_WITH_FEATURES 6 -#define BCACHE_SB_MAX_VERSION 6 - -#define SB_SECTOR 8 -#define SB_OFFSET (SB_SECTOR << SECTOR_SHIFT) -#define SB_SIZE 4096 -#define SB_LABEL_SIZE 32 -#define SB_JOURNAL_BUCKETS 256U -/* SB_JOURNAL_BUCKETS must be divisible by BITS_PER_LONG */ -#define MAX_CACHES_PER_SET 8 - -#define BDEV_DATA_START_DEFAULT 16 /* sectors */ - -struct cache_sb_disk { - __le64 csum; - __le64 offset; /* sector where this sb was written */ - __le64 version; - - __u8 magic[16]; - - __u8 uuid[16]; - union { - __u8 set_uuid[16]; - __le64 set_magic; - }; - __u8 label[SB_LABEL_SIZE]; - - __le64 flags; - __le64 seq; - - __le64 feature_compat; - __le64 feature_incompat; - __le64 feature_ro_compat; - - __le64 pad[5]; - - union { - struct { - /* Cache devices */ - __le64 nbuckets; /* device size */ - - __le16 block_size; /* sectors */ - __le16 bucket_size; /* sectors */ - - __le16 nr_in_set; - __le16 nr_this_dev; - }; - struct { - /* Backing devices */ - __le64 data_offset; - - /* - * block_size from the cache device section is still used by - * backing devices, so don't add anything here until we fix - * things to not need it for backing devices anymore - */ - }; - }; - - __le32 last_mount; /* time overflow in y2106 */ - - __le16 first_bucket; - union { - __le16 njournal_buckets; - __le16 keys; - }; - __le64 d[SB_JOURNAL_BUCKETS]; /* journal buckets */ - __le16 bucket_size_hi; -}; - -/* - * This is for in-memory bcache super block. - * NOTE: cache_sb is NOT exactly mapping to cache_sb_disk, the member - * size, ordering and even whole struct size may be different - * from cache_sb_disk. - */ -struct cache_sb { - __u64 offset; /* sector where this sb was written */ - __u64 version; - - __u8 magic[16]; - - __u8 uuid[16]; - union { - __u8 set_uuid[16]; - __u64 set_magic; - }; - __u8 label[SB_LABEL_SIZE]; - - __u64 flags; - __u64 seq; - - __u64 feature_compat; - __u64 feature_incompat; - __u64 feature_ro_compat; - - union { - struct { - /* Cache devices */ - __u64 nbuckets; /* device size */ - - __u16 block_size; /* sectors */ - __u16 nr_in_set; - __u16 nr_this_dev; - __u32 bucket_size; /* sectors */ - }; - struct { - /* Backing devices */ - __u64 data_offset; - - /* - * block_size from the cache device section is still used by - * backing devices, so don't add anything here until we fix - * things to not need it for backing devices anymore - */ - }; - }; - - __u32 last_mount; /* time overflow in y2106 */ - - __u16 first_bucket; - union { - __u16 njournal_buckets; - __u16 keys; - }; - __u64 d[SB_JOURNAL_BUCKETS]; /* journal buckets */ -}; - -static __inline__ _Bool SB_IS_BDEV(const struct cache_sb *sb) -{ - return sb->version == BCACHE_SB_VERSION_BDEV - || sb->version == BCACHE_SB_VERSION_BDEV_WITH_OFFSET - || sb->version == BCACHE_SB_VERSION_BDEV_WITH_FEATURES; -} - -BITMASK(CACHE_SYNC, struct cache_sb, flags, 0, 1); -BITMASK(CACHE_DISCARD, struct cache_sb, flags, 1, 1); -BITMASK(CACHE_REPLACEMENT, struct cache_sb, flags, 2, 3); -#define CACHE_REPLACEMENT_LRU 0U -#define CACHE_REPLACEMENT_FIFO 1U -#define CACHE_REPLACEMENT_RANDOM 2U - -BITMASK(BDEV_CACHE_MODE, struct cache_sb, flags, 0, 4); -#define CACHE_MODE_WRITETHROUGH 0U -#define CACHE_MODE_WRITEBACK 1U -#define CACHE_MODE_WRITEAROUND 2U -#define CACHE_MODE_NONE 3U -BITMASK(BDEV_STATE, struct cache_sb, flags, 61, 2); -#define BDEV_STATE_NONE 0U -#define BDEV_STATE_CLEAN 1U -#define BDEV_STATE_DIRTY 2U -#define BDEV_STATE_STALE 3U - -/* - * Magic numbers - * - * The various other data structures have their own magic numbers, which are - * xored with the first part of the cache set's UUID - */ - -#define JSET_MAGIC 0x245235c1a3625032ULL -#define PSET_MAGIC 0x6750e15f87337f91ULL -#define BSET_MAGIC 0x90135c78b99e07f5ULL - -static __inline__ __u64 jset_magic(struct cache_sb *sb) -{ - return sb->set_magic ^ JSET_MAGIC; -} - -static __inline__ __u64 pset_magic(struct cache_sb *sb) -{ - return sb->set_magic ^ PSET_MAGIC; -} - -static __inline__ __u64 bset_magic(struct cache_sb *sb) -{ - return sb->set_magic ^ BSET_MAGIC; -} - -/* - * Journal - * - * On disk format for a journal entry: - * seq is monotonically increasing; every journal entry has its own unique - * sequence number. - * - * last_seq is the oldest journal entry that still has keys the btree hasn't - * flushed to disk yet. - * - * version is for on disk format changes. - */ - -#define BCACHE_JSET_VERSION_UUIDv1 1 -#define BCACHE_JSET_VERSION_UUID 1 /* Always latest UUID format */ -#define BCACHE_JSET_VERSION 1 - -struct jset { - __u64 csum; - __u64 magic; - __u64 seq; - __u32 version; - __u32 keys; - - __u64 last_seq; - - BKEY_PADDED(uuid_bucket); - BKEY_PADDED(btree_root); - __u16 btree_level; - __u16 pad[3]; - - __u64 prio_bucket[MAX_CACHES_PER_SET]; - - union { - struct bkey start[0]; - __u64 d[0]; - }; -}; - -/* Bucket prios/gens */ - -struct prio_set { - __u64 csum; - __u64 magic; - __u64 seq; - __u32 version; - __u32 pad; - - __u64 next_bucket; - - struct bucket_disk { - __u16 prio; - __u8 gen; - } __attribute((packed)) data[]; -}; - -/* UUIDS - per backing device/flash only volume metadata */ - -struct uuid_entry { - union { - struct { - __u8 uuid[16]; - __u8 label[32]; - __u32 first_reg; /* time overflow in y2106 */ - __u32 last_reg; - __u32 invalidated; - - __u32 flags; - /* Size of flash only volumes */ - __u64 sectors; - }; - - __u8 pad[128]; - }; -}; - -BITMASK(UUID_FLASH_ONLY, struct uuid_entry, flags, 0, 1); - -/* Btree nodes */ - -/* Version 1: Seed pointer into btree node checksum - */ -#define BCACHE_BSET_CSUM 1 -#define BCACHE_BSET_VERSION 1 - -/* - * Btree nodes - * - * On disk a btree node is a list/log of these; within each set the keys are - * sorted - */ -struct bset { - __u64 csum; - __u64 magic; - __u64 seq; - __u32 version; - __u32 keys; - - union { - struct bkey start[0]; - __u64 d[0]; - }; -}; - -/* OBSOLETE */ - -/* UUIDS - per backing device/flash only volume metadata */ - -struct uuid_entry_v0 { - __u8 uuid[16]; - __u8 label[32]; - __u32 first_reg; - __u32 last_reg; - __u32 invalidated; - __u32 pad; -}; - -#endif /* _LINUX_BCACHE_H */ diff --git a/linux-headers/include/linux/binfmts.h b/linux-headers/include/linux/binfmts.h index dc48db3fb5a..9847a08746b 100644 --- a/linux-headers/include/linux/binfmts.h +++ b/linux-headers/include/linux/binfmts.h @@ -18,4 +18,8 @@ struct pt_regs; /* sizeof(linux_binprm->buf) */ #define BINPRM_BUF_SIZE 256 +/* preserve argv0 for the interpreter */ +#define AT_FLAGS_PRESERVE_ARGV0_BIT 0 +#define AT_FLAGS_PRESERVE_ARGV0 (1 << AT_FLAGS_PRESERVE_ARGV0_BIT) + #endif /* _LINUX_BINFMTS_H */ diff --git a/linux-headers/include/linux/blkpg.h b/linux-headers/include/linux/blkpg.h index 9c894fcea46..3986be03626 100644 --- a/linux-headers/include/linux/blkpg.h +++ b/linux-headers/include/linux/blkpg.h @@ -2,29 +2,6 @@ #ifndef __LINUX_BLKPG_H #define __LINUX_BLKPG_H -/* - * Partition table and disk geometry handling - * - * A single ioctl with lots of subfunctions: - * - * Device number stuff: - * get_whole_disk() (given the device number of a partition, - * find the device number of the encompassing disk) - * get_all_partitions() (given the device number of a disk, return the - * device numbers of all its known partitions) - * - * Partition stuff: - * add_partition() - * delete_partition() - * test_partition_in_use() (also for test_disk_in_use) - * - * Geometry stuff: - * get_geometry() - * set_geometry() - * get_bios_drivedata() - * - * For today, only the partition stuff - aeb, 990515 - */ #include @@ -52,9 +29,8 @@ struct blkpg_partition { long long start; /* starting offset in bytes */ long long length; /* length in bytes */ int pno; /* partition number */ - char devname[BLKPG_DEVNAMELTH]; /* partition name, like sda5 or c0d1p2, - to be used in kernel messages */ - char volname[BLKPG_VOLNAMELTH]; /* volume label */ + char devname[BLKPG_DEVNAMELTH]; /* unused / ignored */ + char volname[BLKPG_VOLNAMELTH]; /* unused / ignore */ }; #endif /* __LINUX_BLKPG_H */ diff --git a/linux-headers/include/linux/blkzoned.h b/linux-headers/include/linux/blkzoned.h index 7f5c3beaa95..5347e40d2e9 100644 --- a/linux-headers/include/linux/blkzoned.h +++ b/linux-headers/include/linux/blkzoned.h @@ -51,13 +51,13 @@ enum blk_zone_type { * * The Zone Condition state machine in the ZBC/ZAC standards maps the above * deinitions as: - * - ZC1: Empty | BLK_ZONE_EMPTY + * - ZC1: Empty | BLK_ZONE_COND_EMPTY * - ZC2: Implicit Open | BLK_ZONE_COND_IMP_OPEN * - ZC3: Explicit Open | BLK_ZONE_COND_EXP_OPEN - * - ZC4: Closed | BLK_ZONE_CLOSED - * - ZC5: Full | BLK_ZONE_FULL - * - ZC6: Read Only | BLK_ZONE_READONLY - * - ZC7: Offline | BLK_ZONE_OFFLINE + * - ZC4: Closed | BLK_ZONE_COND_CLOSED + * - ZC5: Full | BLK_ZONE_COND_FULL + * - ZC6: Read Only | BLK_ZONE_COND_READONLY + * - ZC7: Offline | BLK_ZONE_COND_OFFLINE * * Conditions 0x5 to 0xC are reserved by the current ZBC/ZAC spec and should * be considered invalid. @@ -130,7 +130,7 @@ struct blk_zone_report { __u64 sector; __u32 nr_zones; __u32 flags; - struct blk_zone zones[0]; + struct blk_zone zones[]; }; /** diff --git a/linux-headers/include/linux/bpf.h b/linux-headers/include/linux/bpf.h index 21f967a2263..f6f4347b75a 100644 --- a/linux-headers/include/linux/bpf.h +++ b/linux-headers/include/linux/bpf.h @@ -19,7 +19,9 @@ /* ld/ldx fields */ #define BPF_DW 0x18 /* double word (64-bit) */ -#define BPF_XADD 0xc0 /* exclusive add */ +#define BPF_MEMSX 0x80 /* load with sign extension */ +#define BPF_ATOMIC 0xc0 /* atomic memory ops - op type in immediate */ +#define BPF_XADD 0xc0 /* exclusive add - legacy name */ /* alu/jmp fields */ #define BPF_MOV 0xb0 /* mov reg to reg */ @@ -43,6 +45,11 @@ #define BPF_CALL 0x80 /* function call */ #define BPF_EXIT 0x90 /* function return */ +/* atomic op type fields (stored in immediate) */ +#define BPF_FETCH 0x01 /* not an opcode on its own, used to build others */ +#define BPF_XCHG (0xe0 | BPF_FETCH) /* atomic exchange */ +#define BPF_CMPXCHG (0xf0 | BPF_FETCH) /* atomic compare-and-write */ + /* Register numbers */ enum { BPF_REG_0 = 0, @@ -78,16 +85,784 @@ struct bpf_lpm_trie_key { struct bpf_cgroup_storage_key { __u64 cgroup_inode_id; /* cgroup inode id */ - __u32 attach_type; /* program attach type */ + __u32 attach_type; /* program attach type (enum bpf_attach_type) */ +}; + +enum bpf_cgroup_iter_order { + BPF_CGROUP_ITER_ORDER_UNSPEC = 0, + BPF_CGROUP_ITER_SELF_ONLY, /* process only a single object. */ + BPF_CGROUP_ITER_DESCENDANTS_PRE, /* walk descendants in pre-order. */ + BPF_CGROUP_ITER_DESCENDANTS_POST, /* walk descendants in post-order. */ + BPF_CGROUP_ITER_ANCESTORS_UP, /* walk ancestors upward. */ }; union bpf_iter_link_info { struct { __u32 map_fd; } map; + struct { + enum bpf_cgroup_iter_order order; + + /* At most one of cgroup_fd and cgroup_id can be non-zero. If + * both are zero, the walk starts from the default cgroup v2 + * root. For walking v1 hierarchy, one should always explicitly + * specify cgroup_fd. + */ + __u32 cgroup_fd; + __u64 cgroup_id; + } cgroup; + /* Parameters of task iterators. */ + struct { + __u32 tid; + __u32 pid; + __u32 pid_fd; + } task; }; -/* BPF syscall commands, see bpf(2) man-page for details. */ +/* BPF syscall commands, see bpf(2) man-page for more details. */ +/** + * DOC: eBPF Syscall Preamble + * + * The operation to be performed by the **bpf**\ () system call is determined + * by the *cmd* argument. Each operation takes an accompanying argument, + * provided via *attr*, which is a pointer to a union of type *bpf_attr* (see + * below). The size argument is the size of the union pointed to by *attr*. + */ +/** + * DOC: eBPF Syscall Commands + * + * BPF_MAP_CREATE + * Description + * Create a map and return a file descriptor that refers to the + * map. The close-on-exec file descriptor flag (see **fcntl**\ (2)) + * is automatically enabled for the new file descriptor. + * + * Applying **close**\ (2) to the file descriptor returned by + * **BPF_MAP_CREATE** will delete the map (but see NOTES). + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_MAP_LOOKUP_ELEM + * Description + * Look up an element with a given *key* in the map referred to + * by the file descriptor *map_fd*. + * + * The *flags* argument may be specified as one of the + * following: + * + * **BPF_F_LOCK** + * Look up the value of a spin-locked map without + * returning the lock. This must be specified if the + * elements contain a spinlock. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_MAP_UPDATE_ELEM + * Description + * Create or update an element (key/value pair) in a specified map. + * + * The *flags* argument should be specified as one of the + * following: + * + * **BPF_ANY** + * Create a new element or update an existing element. + * **BPF_NOEXIST** + * Create a new element only if it did not exist. + * **BPF_EXIST** + * Update an existing element. + * **BPF_F_LOCK** + * Update a spin_lock-ed map element. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * May set *errno* to **EINVAL**, **EPERM**, **ENOMEM**, + * **E2BIG**, **EEXIST**, or **ENOENT**. + * + * **E2BIG** + * The number of elements in the map reached the + * *max_entries* limit specified at map creation time. + * **EEXIST** + * If *flags* specifies **BPF_NOEXIST** and the element + * with *key* already exists in the map. + * **ENOENT** + * If *flags* specifies **BPF_EXIST** and the element with + * *key* does not exist in the map. + * + * BPF_MAP_DELETE_ELEM + * Description + * Look up and delete an element by key in a specified map. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_MAP_GET_NEXT_KEY + * Description + * Look up an element by key in a specified map and return the key + * of the next element. Can be used to iterate over all elements + * in the map. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * The following cases can be used to iterate over all elements of + * the map: + * + * * If *key* is not found, the operation returns zero and sets + * the *next_key* pointer to the key of the first element. + * * If *key* is found, the operation returns zero and sets the + * *next_key* pointer to the key of the next element. + * * If *key* is the last element, returns -1 and *errno* is set + * to **ENOENT**. + * + * May set *errno* to **ENOMEM**, **EFAULT**, **EPERM**, or + * **EINVAL** on error. + * + * BPF_PROG_LOAD + * Description + * Verify and load an eBPF program, returning a new file + * descriptor associated with the program. + * + * Applying **close**\ (2) to the file descriptor returned by + * **BPF_PROG_LOAD** will unload the eBPF program (but see NOTES). + * + * The close-on-exec file descriptor flag (see **fcntl**\ (2)) is + * automatically enabled for the new file descriptor. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_OBJ_PIN + * Description + * Pin an eBPF program or map referred by the specified *bpf_fd* + * to the provided *pathname* on the filesystem. + * + * The *pathname* argument must not contain a dot ("."). + * + * On success, *pathname* retains a reference to the eBPF object, + * preventing deallocation of the object when the original + * *bpf_fd* is closed. This allow the eBPF object to live beyond + * **close**\ (\ *bpf_fd*\ ), and hence the lifetime of the parent + * process. + * + * Applying **unlink**\ (2) or similar calls to the *pathname* + * unpins the object from the filesystem, removing the reference. + * If no other file descriptors or filesystem nodes refer to the + * same object, it will be deallocated (see NOTES). + * + * The filesystem type for the parent directory of *pathname* must + * be **BPF_FS_MAGIC**. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_OBJ_GET + * Description + * Open a file descriptor for the eBPF object pinned to the + * specified *pathname*. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_PROG_ATTACH + * Description + * Attach an eBPF program to a *target_fd* at the specified + * *attach_type* hook. + * + * The *attach_type* specifies the eBPF attachment point to + * attach the program to, and must be one of *bpf_attach_type* + * (see below). + * + * The *attach_bpf_fd* must be a valid file descriptor for a + * loaded eBPF program of a cgroup, flow dissector, LIRC, sockmap + * or sock_ops type corresponding to the specified *attach_type*. + * + * The *target_fd* must be a valid file descriptor for a kernel + * object which depends on the attach type of *attach_bpf_fd*: + * + * **BPF_PROG_TYPE_CGROUP_DEVICE**, + * **BPF_PROG_TYPE_CGROUP_SKB**, + * **BPF_PROG_TYPE_CGROUP_SOCK**, + * **BPF_PROG_TYPE_CGROUP_SOCK_ADDR**, + * **BPF_PROG_TYPE_CGROUP_SOCKOPT**, + * **BPF_PROG_TYPE_CGROUP_SYSCTL**, + * **BPF_PROG_TYPE_SOCK_OPS** + * + * Control Group v2 hierarchy with the eBPF controller + * enabled. Requires the kernel to be compiled with + * **CONFIG_CGROUP_BPF**. + * + * **BPF_PROG_TYPE_FLOW_DISSECTOR** + * + * Network namespace (eg /proc/self/ns/net). + * + * **BPF_PROG_TYPE_LIRC_MODE2** + * + * LIRC device path (eg /dev/lircN). Requires the kernel + * to be compiled with **CONFIG_BPF_LIRC_MODE2**. + * + * **BPF_PROG_TYPE_SK_SKB**, + * **BPF_PROG_TYPE_SK_MSG** + * + * eBPF map of socket type (eg **BPF_MAP_TYPE_SOCKHASH**). + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_PROG_DETACH + * Description + * Detach the eBPF program associated with the *target_fd* at the + * hook specified by *attach_type*. The program must have been + * previously attached using **BPF_PROG_ATTACH**. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_PROG_TEST_RUN + * Description + * Run the eBPF program associated with the *prog_fd* a *repeat* + * number of times against a provided program context *ctx_in* and + * data *data_in*, and return the modified program context + * *ctx_out*, *data_out* (for example, packet data), result of the + * execution *retval*, and *duration* of the test run. + * + * The sizes of the buffers provided as input and output + * parameters *ctx_in*, *ctx_out*, *data_in*, and *data_out* must + * be provided in the corresponding variables *ctx_size_in*, + * *ctx_size_out*, *data_size_in*, and/or *data_size_out*. If any + * of these parameters are not provided (ie set to NULL), the + * corresponding size field must be zero. + * + * Some program types have particular requirements: + * + * **BPF_PROG_TYPE_SK_LOOKUP** + * *data_in* and *data_out* must be NULL. + * + * **BPF_PROG_TYPE_RAW_TRACEPOINT**, + * **BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE** + * + * *ctx_out*, *data_in* and *data_out* must be NULL. + * *repeat* must be zero. + * + * BPF_PROG_RUN is an alias for BPF_PROG_TEST_RUN. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * **ENOSPC** + * Either *data_size_out* or *ctx_size_out* is too small. + * **ENOTSUPP** + * This command is not supported by the program type of + * the program referred to by *prog_fd*. + * + * BPF_PROG_GET_NEXT_ID + * Description + * Fetch the next eBPF program currently loaded into the kernel. + * + * Looks for the eBPF program with an id greater than *start_id* + * and updates *next_id* on success. If no other eBPF programs + * remain with ids higher than *start_id*, returns -1 and sets + * *errno* to **ENOENT**. + * + * Return + * Returns zero on success. On error, or when no id remains, -1 + * is returned and *errno* is set appropriately. + * + * BPF_MAP_GET_NEXT_ID + * Description + * Fetch the next eBPF map currently loaded into the kernel. + * + * Looks for the eBPF map with an id greater than *start_id* + * and updates *next_id* on success. If no other eBPF maps + * remain with ids higher than *start_id*, returns -1 and sets + * *errno* to **ENOENT**. + * + * Return + * Returns zero on success. On error, or when no id remains, -1 + * is returned and *errno* is set appropriately. + * + * BPF_PROG_GET_FD_BY_ID + * Description + * Open a file descriptor for the eBPF program corresponding to + * *prog_id*. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_MAP_GET_FD_BY_ID + * Description + * Open a file descriptor for the eBPF map corresponding to + * *map_id*. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_OBJ_GET_INFO_BY_FD + * Description + * Obtain information about the eBPF object corresponding to + * *bpf_fd*. + * + * Populates up to *info_len* bytes of *info*, which will be in + * one of the following formats depending on the eBPF object type + * of *bpf_fd*: + * + * * **struct bpf_prog_info** + * * **struct bpf_map_info** + * * **struct bpf_btf_info** + * * **struct bpf_link_info** + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_PROG_QUERY + * Description + * Obtain information about eBPF programs associated with the + * specified *attach_type* hook. + * + * The *target_fd* must be a valid file descriptor for a kernel + * object which depends on the attach type of *attach_bpf_fd*: + * + * **BPF_PROG_TYPE_CGROUP_DEVICE**, + * **BPF_PROG_TYPE_CGROUP_SKB**, + * **BPF_PROG_TYPE_CGROUP_SOCK**, + * **BPF_PROG_TYPE_CGROUP_SOCK_ADDR**, + * **BPF_PROG_TYPE_CGROUP_SOCKOPT**, + * **BPF_PROG_TYPE_CGROUP_SYSCTL**, + * **BPF_PROG_TYPE_SOCK_OPS** + * + * Control Group v2 hierarchy with the eBPF controller + * enabled. Requires the kernel to be compiled with + * **CONFIG_CGROUP_BPF**. + * + * **BPF_PROG_TYPE_FLOW_DISSECTOR** + * + * Network namespace (eg /proc/self/ns/net). + * + * **BPF_PROG_TYPE_LIRC_MODE2** + * + * LIRC device path (eg /dev/lircN). Requires the kernel + * to be compiled with **CONFIG_BPF_LIRC_MODE2**. + * + * **BPF_PROG_QUERY** always fetches the number of programs + * attached and the *attach_flags* which were used to attach those + * programs. Additionally, if *prog_ids* is nonzero and the number + * of attached programs is less than *prog_cnt*, populates + * *prog_ids* with the eBPF program ids of the programs attached + * at *target_fd*. + * + * The following flags may alter the result: + * + * **BPF_F_QUERY_EFFECTIVE** + * Only return information regarding programs which are + * currently effective at the specified *target_fd*. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_RAW_TRACEPOINT_OPEN + * Description + * Attach an eBPF program to a tracepoint *name* to access kernel + * internal arguments of the tracepoint in their raw form. + * + * The *prog_fd* must be a valid file descriptor associated with + * a loaded eBPF program of type **BPF_PROG_TYPE_RAW_TRACEPOINT**. + * + * No ABI guarantees are made about the content of tracepoint + * arguments exposed to the corresponding eBPF program. + * + * Applying **close**\ (2) to the file descriptor returned by + * **BPF_RAW_TRACEPOINT_OPEN** will delete the map (but see NOTES). + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_BTF_LOAD + * Description + * Verify and load BPF Type Format (BTF) metadata into the kernel, + * returning a new file descriptor associated with the metadata. + * BTF is described in more detail at + * https://www.kernel.org/doc/html/latest/bpf/btf.html. + * + * The *btf* parameter must point to valid memory providing + * *btf_size* bytes of BTF binary metadata. + * + * The returned file descriptor can be passed to other **bpf**\ () + * subcommands such as **BPF_PROG_LOAD** or **BPF_MAP_CREATE** to + * associate the BTF with those objects. + * + * Similar to **BPF_PROG_LOAD**, **BPF_BTF_LOAD** has optional + * parameters to specify a *btf_log_buf*, *btf_log_size* and + * *btf_log_level* which allow the kernel to return freeform log + * output regarding the BTF verification process. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_BTF_GET_FD_BY_ID + * Description + * Open a file descriptor for the BPF Type Format (BTF) + * corresponding to *btf_id*. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_TASK_FD_QUERY + * Description + * Obtain information about eBPF programs associated with the + * target process identified by *pid* and *fd*. + * + * If the *pid* and *fd* are associated with a tracepoint, kprobe + * or uprobe perf event, then the *prog_id* and *fd_type* will + * be populated with the eBPF program id and file descriptor type + * of type **bpf_task_fd_type**. If associated with a kprobe or + * uprobe, the *probe_offset* and *probe_addr* will also be + * populated. Optionally, if *buf* is provided, then up to + * *buf_len* bytes of *buf* will be populated with the name of + * the tracepoint, kprobe or uprobe. + * + * The resulting *prog_id* may be introspected in deeper detail + * using **BPF_PROG_GET_FD_BY_ID** and **BPF_OBJ_GET_INFO_BY_FD**. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_MAP_LOOKUP_AND_DELETE_ELEM + * Description + * Look up an element with the given *key* in the map referred to + * by the file descriptor *fd*, and if found, delete the element. + * + * For **BPF_MAP_TYPE_QUEUE** and **BPF_MAP_TYPE_STACK** map + * types, the *flags* argument needs to be set to 0, but for other + * map types, it may be specified as: + * + * **BPF_F_LOCK** + * Look up and delete the value of a spin-locked map + * without returning the lock. This must be specified if + * the elements contain a spinlock. + * + * The **BPF_MAP_TYPE_QUEUE** and **BPF_MAP_TYPE_STACK** map types + * implement this command as a "pop" operation, deleting the top + * element rather than one corresponding to *key*. + * The *key* and *key_len* parameters should be zeroed when + * issuing this operation for these map types. + * + * This command is only valid for the following map types: + * * **BPF_MAP_TYPE_QUEUE** + * * **BPF_MAP_TYPE_STACK** + * * **BPF_MAP_TYPE_HASH** + * * **BPF_MAP_TYPE_PERCPU_HASH** + * * **BPF_MAP_TYPE_LRU_HASH** + * * **BPF_MAP_TYPE_LRU_PERCPU_HASH** + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_MAP_FREEZE + * Description + * Freeze the permissions of the specified map. + * + * Write permissions may be frozen by passing zero *flags*. + * Upon success, no future syscall invocations may alter the + * map state of *map_fd*. Write operations from eBPF programs + * are still possible for a frozen map. + * + * Not supported for maps of type **BPF_MAP_TYPE_STRUCT_OPS**. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_BTF_GET_NEXT_ID + * Description + * Fetch the next BPF Type Format (BTF) object currently loaded + * into the kernel. + * + * Looks for the BTF object with an id greater than *start_id* + * and updates *next_id* on success. If no other BTF objects + * remain with ids higher than *start_id*, returns -1 and sets + * *errno* to **ENOENT**. + * + * Return + * Returns zero on success. On error, or when no id remains, -1 + * is returned and *errno* is set appropriately. + * + * BPF_MAP_LOOKUP_BATCH + * Description + * Iterate and fetch multiple elements in a map. + * + * Two opaque values are used to manage batch operations, + * *in_batch* and *out_batch*. Initially, *in_batch* must be set + * to NULL to begin the batched operation. After each subsequent + * **BPF_MAP_LOOKUP_BATCH**, the caller should pass the resultant + * *out_batch* as the *in_batch* for the next operation to + * continue iteration from the current point. + * + * The *keys* and *values* are output parameters which must point + * to memory large enough to hold *count* items based on the key + * and value size of the map *map_fd*. The *keys* buffer must be + * of *key_size* * *count*. The *values* buffer must be of + * *value_size* * *count*. + * + * The *elem_flags* argument may be specified as one of the + * following: + * + * **BPF_F_LOCK** + * Look up the value of a spin-locked map without + * returning the lock. This must be specified if the + * elements contain a spinlock. + * + * On success, *count* elements from the map are copied into the + * user buffer, with the keys copied into *keys* and the values + * copied into the corresponding indices in *values*. + * + * If an error is returned and *errno* is not **EFAULT**, *count* + * is set to the number of successfully processed elements. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * May set *errno* to **ENOSPC** to indicate that *keys* or + * *values* is too small to dump an entire bucket during + * iteration of a hash-based map type. + * + * BPF_MAP_LOOKUP_AND_DELETE_BATCH + * Description + * Iterate and delete all elements in a map. + * + * This operation has the same behavior as + * **BPF_MAP_LOOKUP_BATCH** with two exceptions: + * + * * Every element that is successfully returned is also deleted + * from the map. This is at least *count* elements. Note that + * *count* is both an input and an output parameter. + * * Upon returning with *errno* set to **EFAULT**, up to + * *count* elements may be deleted without returning the keys + * and values of the deleted elements. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_MAP_UPDATE_BATCH + * Description + * Update multiple elements in a map by *key*. + * + * The *keys* and *values* are input parameters which must point + * to memory large enough to hold *count* items based on the key + * and value size of the map *map_fd*. The *keys* buffer must be + * of *key_size* * *count*. The *values* buffer must be of + * *value_size* * *count*. + * + * Each element specified in *keys* is sequentially updated to the + * value in the corresponding index in *values*. The *in_batch* + * and *out_batch* parameters are ignored and should be zeroed. + * + * The *elem_flags* argument should be specified as one of the + * following: + * + * **BPF_ANY** + * Create new elements or update a existing elements. + * **BPF_NOEXIST** + * Create new elements only if they do not exist. + * **BPF_EXIST** + * Update existing elements. + * **BPF_F_LOCK** + * Update spin_lock-ed map elements. This must be + * specified if the map value contains a spinlock. + * + * On success, *count* elements from the map are updated. + * + * If an error is returned and *errno* is not **EFAULT**, *count* + * is set to the number of successfully processed elements. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * May set *errno* to **EINVAL**, **EPERM**, **ENOMEM**, or + * **E2BIG**. **E2BIG** indicates that the number of elements in + * the map reached the *max_entries* limit specified at map + * creation time. + * + * May set *errno* to one of the following error codes under + * specific circumstances: + * + * **EEXIST** + * If *flags* specifies **BPF_NOEXIST** and the element + * with *key* already exists in the map. + * **ENOENT** + * If *flags* specifies **BPF_EXIST** and the element with + * *key* does not exist in the map. + * + * BPF_MAP_DELETE_BATCH + * Description + * Delete multiple elements in a map by *key*. + * + * The *keys* parameter is an input parameter which must point + * to memory large enough to hold *count* items based on the key + * size of the map *map_fd*, that is, *key_size* * *count*. + * + * Each element specified in *keys* is sequentially deleted. The + * *in_batch*, *out_batch*, and *values* parameters are ignored + * and should be zeroed. + * + * The *elem_flags* argument may be specified as one of the + * following: + * + * **BPF_F_LOCK** + * Look up the value of a spin-locked map without + * returning the lock. This must be specified if the + * elements contain a spinlock. + * + * On success, *count* elements from the map are updated. + * + * If an error is returned and *errno* is not **EFAULT**, *count* + * is set to the number of successfully processed elements. If + * *errno* is **EFAULT**, up to *count* elements may be been + * deleted. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_LINK_CREATE + * Description + * Attach an eBPF program to a *target_fd* at the specified + * *attach_type* hook and return a file descriptor handle for + * managing the link. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_LINK_UPDATE + * Description + * Update the eBPF program in the specified *link_fd* to + * *new_prog_fd*. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_LINK_GET_FD_BY_ID + * Description + * Open a file descriptor for the eBPF Link corresponding to + * *link_id*. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_LINK_GET_NEXT_ID + * Description + * Fetch the next eBPF link currently loaded into the kernel. + * + * Looks for the eBPF link with an id greater than *start_id* + * and updates *next_id* on success. If no other eBPF links + * remain with ids higher than *start_id*, returns -1 and sets + * *errno* to **ENOENT**. + * + * Return + * Returns zero on success. On error, or when no id remains, -1 + * is returned and *errno* is set appropriately. + * + * BPF_ENABLE_STATS + * Description + * Enable eBPF runtime statistics gathering. + * + * Runtime statistics gathering for the eBPF runtime is disabled + * by default to minimize the corresponding performance overhead. + * This command enables statistics globally. + * + * Multiple programs may independently enable statistics. + * After gathering the desired statistics, eBPF runtime statistics + * may be disabled again by calling **close**\ (2) for the file + * descriptor returned by this function. Statistics will only be + * disabled system-wide when all outstanding file descriptors + * returned by prior calls for this subcommand are closed. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_ITER_CREATE + * Description + * Create an iterator on top of the specified *link_fd* (as + * previously created using **BPF_LINK_CREATE**) and return a + * file descriptor that can be used to trigger the iteration. + * + * If the resulting file descriptor is pinned to the filesystem + * using **BPF_OBJ_PIN**, then subsequent **read**\ (2) syscalls + * for that path will trigger the iterator to read kernel state + * using the eBPF program attached to *link_fd*. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_LINK_DETACH + * Description + * Forcefully detach the specified *link_fd* from its + * corresponding attachment point. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_PROG_BIND_MAP + * Description + * Bind a map to the lifetime of an eBPF program. + * + * The map identified by *map_fd* is bound to the program + * identified by *prog_fd* and only released when *prog_fd* is + * released. This may be used in cases where metadata should be + * associated with a program which otherwise does not contain any + * references to the map (for example, embedded in the eBPF + * program instructions). + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * NOTES + * eBPF objects (maps and programs) can be shared between processes. + * + * * After **fork**\ (2), the child inherits file descriptors + * referring to the same eBPF objects. + * * File descriptors referring to eBPF objects can be transferred over + * **unix**\ (7) domain sockets. + * * File descriptors referring to eBPF objects can be duplicated in the + * usual way, using **dup**\ (2) and similar calls. + * * File descriptors referring to eBPF objects can be pinned to the + * filesystem using the **BPF_OBJ_PIN** command of **bpf**\ (2). + * + * An eBPF object is deallocated only after all file descriptors referring + * to the object have been closed and no references remain pinned to the + * filesystem or attached (for example, bound to a program or device). + */ enum bpf_cmd { BPF_MAP_CREATE, BPF_MAP_LOOKUP_ELEM, @@ -100,6 +875,7 @@ enum bpf_cmd { BPF_PROG_ATTACH, BPF_PROG_DETACH, BPF_PROG_TEST_RUN, + BPF_PROG_RUN = BPF_PROG_TEST_RUN, BPF_PROG_GET_NEXT_ID, BPF_MAP_GET_NEXT_ID, BPF_PROG_GET_FD_BY_ID, @@ -147,7 +923,14 @@ enum bpf_map_type { BPF_MAP_TYPE_CPUMAP, BPF_MAP_TYPE_XSKMAP, BPF_MAP_TYPE_SOCKHASH, - BPF_MAP_TYPE_CGROUP_STORAGE, + BPF_MAP_TYPE_CGROUP_STORAGE_DEPRECATED, + /* BPF_MAP_TYPE_CGROUP_STORAGE is available to bpf programs attaching + * to a cgroup. The newer BPF_MAP_TYPE_CGRP_STORAGE is available to + * both cgroup-attached and other progs and supports all functionality + * provided by BPF_MAP_TYPE_CGROUP_STORAGE. So mark + * BPF_MAP_TYPE_CGROUP_STORAGE deprecated. + */ + BPF_MAP_TYPE_CGROUP_STORAGE = BPF_MAP_TYPE_CGROUP_STORAGE_DEPRECATED, BPF_MAP_TYPE_REUSEPORT_SOCKARRAY, BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE, BPF_MAP_TYPE_QUEUE, @@ -157,6 +940,10 @@ enum bpf_map_type { BPF_MAP_TYPE_STRUCT_OPS, BPF_MAP_TYPE_RINGBUF, BPF_MAP_TYPE_INODE_STORAGE, + BPF_MAP_TYPE_TASK_STORAGE, + BPF_MAP_TYPE_BLOOM_FILTER, + BPF_MAP_TYPE_USER_RINGBUF, + BPF_MAP_TYPE_CGRP_STORAGE, }; /* Note that tracing related programs such as @@ -199,6 +986,8 @@ enum bpf_prog_type { BPF_PROG_TYPE_EXT, BPF_PROG_TYPE_LSM, BPF_PROG_TYPE_SK_LOOKUP, + BPF_PROG_TYPE_SYSCALL, /* a program that can execute syscalls */ + BPF_PROG_TYPE_NETFILTER, }; enum bpf_attach_type { @@ -240,6 +1029,17 @@ enum bpf_attach_type { BPF_XDP_CPUMAP, BPF_SK_LOOKUP, BPF_XDP, + BPF_SK_SKB_VERDICT, + BPF_SK_REUSEPORT_SELECT, + BPF_SK_REUSEPORT_SELECT_OR_MIGRATE, + BPF_PERF_EVENT, + BPF_TRACE_KPROBE_MULTI, + BPF_LSM_CGROUP, + BPF_STRUCT_OPS, + BPF_NETFILTER, + BPF_TCX_INGRESS, + BPF_TCX_EGRESS, + BPF_TRACE_UPROBE_MULTI, __MAX_BPF_ATTACH_TYPE }; @@ -253,10 +1053,25 @@ enum bpf_link_type { BPF_LINK_TYPE_ITER = 4, BPF_LINK_TYPE_NETNS = 5, BPF_LINK_TYPE_XDP = 6, - + BPF_LINK_TYPE_PERF_EVENT = 7, + BPF_LINK_TYPE_KPROBE_MULTI = 8, + BPF_LINK_TYPE_STRUCT_OPS = 9, + BPF_LINK_TYPE_NETFILTER = 10, + BPF_LINK_TYPE_TCX = 11, + BPF_LINK_TYPE_UPROBE_MULTI = 12, MAX_BPF_LINK_TYPE, }; +enum bpf_perf_event_type { + BPF_PERF_EVENT_UNSPEC = 0, + BPF_PERF_EVENT_UPROBE = 1, + BPF_PERF_EVENT_URETPROBE = 2, + BPF_PERF_EVENT_KPROBE = 3, + BPF_PERF_EVENT_KRETPROBE = 4, + BPF_PERF_EVENT_TRACEPOINT = 5, + BPF_PERF_EVENT_EVENT = 6, +}; + /* cgroup-bpf attach flags used in BPF_PROG_ATTACH command * * NONE(default): No further bpf programs allowed in the subtree. @@ -303,7 +1118,12 @@ enum bpf_link_type { */ #define BPF_F_ALLOW_OVERRIDE (1U << 0) #define BPF_F_ALLOW_MULTI (1U << 1) +/* Generic attachment flags. */ #define BPF_F_REPLACE (1U << 2) +#define BPF_F_BEFORE (1U << 3) +#define BPF_F_AFTER (1U << 4) +#define BPF_F_ID (1U << 5) +#define BPF_F_LINK BPF_F_LINK /* 1 << 13 */ /* If BPF_F_STRICT_ALIGNMENT is used in BPF_PROG_LOAD command, the * verifier will perform strict alignment checking as if the kernel @@ -312,7 +1132,7 @@ enum bpf_link_type { */ #define BPF_F_STRICT_ALIGNMENT (1U << 0) -/* If BPF_F_ANY_ALIGNMENT is used in BPF_PROF_LOAD command, the +/* If BPF_F_ANY_ALIGNMENT is used in BPF_PROG_LOAD command, the * verifier will allow any alignment whatsoever. On platforms * with strict alignment requirements for loads ands stores (such * as sparc and mips) the verifier validates that all loads and @@ -355,27 +1175,60 @@ enum bpf_link_type { */ #define BPF_F_SLEEPABLE (1U << 4) -/* When BPF ldimm64's insn[0].src_reg != 0 then this can have - * the following extensions: - * - * insn[0].src_reg: BPF_PSEUDO_MAP_FD - * insn[0].imm: map fd - * insn[1].imm: 0 - * insn[0].off: 0 - * insn[1].off: 0 - * ldimm64 rewrite: address of map +/* If BPF_F_XDP_HAS_FRAGS is used in BPF_PROG_LOAD command, the loaded program + * fully support xdp frags. + */ +#define BPF_F_XDP_HAS_FRAGS (1U << 5) + +/* If BPF_F_XDP_DEV_BOUND_ONLY is used in BPF_PROG_LOAD command, the loaded + * program becomes device-bound but can access XDP metadata. + */ +#define BPF_F_XDP_DEV_BOUND_ONLY (1U << 6) + +/* link_create.kprobe_multi.flags used in LINK_CREATE command for + * BPF_TRACE_KPROBE_MULTI attach type to create return probe. + */ +enum { + BPF_F_KPROBE_MULTI_RETURN = (1U << 0) +}; + +/* link_create.uprobe_multi.flags used in LINK_CREATE command for + * BPF_TRACE_UPROBE_MULTI attach type to create return probe. + */ +enum { + BPF_F_UPROBE_MULTI_RETURN = (1U << 0) +}; + +/* link_create.netfilter.flags used in LINK_CREATE command for + * BPF_PROG_TYPE_NETFILTER to enable IP packet defragmentation. + */ +#define BPF_F_NETFILTER_IP_DEFRAG (1U << 0) + +/* When BPF ldimm64's insn[0].src_reg != 0 then this can have + * the following extensions: + * + * insn[0].src_reg: BPF_PSEUDO_MAP_[FD|IDX] + * insn[0].imm: map fd or fd_idx + * insn[1].imm: 0 + * insn[0].off: 0 + * insn[1].off: 0 + * ldimm64 rewrite: address of map * verifier type: CONST_PTR_TO_MAP */ #define BPF_PSEUDO_MAP_FD 1 -/* insn[0].src_reg: BPF_PSEUDO_MAP_VALUE - * insn[0].imm: map fd +#define BPF_PSEUDO_MAP_IDX 5 + +/* insn[0].src_reg: BPF_PSEUDO_MAP_[IDX_]VALUE + * insn[0].imm: map fd or fd_idx * insn[1].imm: offset into value * insn[0].off: 0 * insn[1].off: 0 * ldimm64 rewrite: address of map[0]+offset * verifier type: PTR_TO_MAP_VALUE */ -#define BPF_PSEUDO_MAP_VALUE 2 +#define BPF_PSEUDO_MAP_VALUE 2 +#define BPF_PSEUDO_MAP_IDX_VALUE 6 + /* insn[0].src_reg: BPF_PSEUDO_BTF_ID * insn[0].imm: kernel btd id of VAR * insn[1].imm: 0 @@ -386,11 +1239,24 @@ enum bpf_link_type { * is struct/union. */ #define BPF_PSEUDO_BTF_ID 3 +/* insn[0].src_reg: BPF_PSEUDO_FUNC + * insn[0].imm: insn offset to the func + * insn[1].imm: 0 + * insn[0].off: 0 + * insn[1].off: 0 + * ldimm64 rewrite: address of the function + * verifier type: PTR_TO_FUNC. + */ +#define BPF_PSEUDO_FUNC 4 /* when bpf_call->src_reg == BPF_PSEUDO_CALL, bpf_call->imm == pc-relative * offset to another bpf function */ #define BPF_PSEUDO_CALL 1 +/* when bpf_call->src_reg == BPF_PSEUDO_KFUNC_CALL, + * bpf_call->imm == btf_id of a BTF_KIND_FUNC in the running kernel + */ +#define BPF_PSEUDO_KFUNC_CALL 2 /* flags for BPF_MAP_UPDATE_ELEM command */ enum { @@ -438,13 +1304,19 @@ enum { /* Create a map that is suitable to be an inner map with dynamic max entries */ BPF_F_INNER_MAP = (1U << 12), + +/* Create a map that will be registered/unregesitered by the backed bpf_link */ + BPF_F_LINK = (1U << 13), + +/* Get path from provided FD in BPF_OBJ_PIN/BPF_OBJ_GET commands */ + BPF_F_PATH_FD = (1U << 14), }; /* Flags for BPF_PROG_QUERY. */ /* Query effective (directly attached + inherited from ancestor cgroups) * programs that will be executed for events within a cgroup. - * attach_flags with this flag are returned only for directly attached programs. + * attach_flags with this flag are always returned 0. */ #define BPF_F_QUERY_EFFECTIVE (1U << 0) @@ -452,6 +1324,8 @@ enum { /* If set, run the test on the cpu specified by bpf_attr.test.cpu */ #define BPF_F_TEST_RUN_ON_CPU (1U << 0) +/* If set, XDP frames will be transmitted after processing */ +#define BPF_F_TEST_XDP_LIVE_FRAMES (1U << 1) /* type for BPF_ENABLE_STATS */ enum bpf_stats_type { @@ -502,6 +1376,13 @@ union bpf_attr { * struct stored as the * map value */ + /* Any per-map-type extra fields + * + * BPF_MAP_TYPE_BLOOM_FILTER - the lowest 4 bits indicate the + * number of hash functions (if 0, the bloom filter will default + * to using 5 hash functions). + */ + __u64 map_extra; }; struct { /* anonymous struct used by BPF_MAP_*_ELEM commands */ @@ -556,24 +1437,50 @@ union bpf_attr { __aligned_u64 line_info; /* line info */ __u32 line_info_cnt; /* number of bpf_line_info records */ __u32 attach_btf_id; /* in-kernel BTF type id to attach to */ - __u32 attach_prog_fd; /* 0 to attach to vmlinux */ + union { + /* valid prog_fd to attach to bpf prog */ + __u32 attach_prog_fd; + /* or valid module BTF object fd or 0 to attach to vmlinux */ + __u32 attach_btf_obj_fd; + }; + __u32 core_relo_cnt; /* number of bpf_core_relo */ + __aligned_u64 fd_array; /* array of FDs */ + __aligned_u64 core_relos; + __u32 core_relo_rec_size; /* sizeof(struct bpf_core_relo) */ + /* output: actual total log contents size (including termintaing zero). + * It could be both larger than original log_size (if log was + * truncated), or smaller (if log buffer wasn't filled completely). + */ + __u32 log_true_size; }; struct { /* anonymous struct used by BPF_OBJ_* commands */ __aligned_u64 pathname; __u32 bpf_fd; __u32 file_flags; + /* Same as dirfd in openat() syscall; see openat(2) + * manpage for details of path FD and pathname semantics; + * path_fd should accompanied by BPF_F_PATH_FD flag set in + * file_flags field, otherwise it should be set to zero; + * if BPF_F_PATH_FD flag is not set, AT_FDCWD is assumed. + */ + __s32 path_fd; }; struct { /* anonymous struct used by BPF_PROG_ATTACH/DETACH commands */ - __u32 target_fd; /* container object to attach to */ - __u32 attach_bpf_fd; /* eBPF program to attach */ + union { + __u32 target_fd; /* target object to attach to or ... */ + __u32 target_ifindex; /* target ifindex */ + }; + __u32 attach_bpf_fd; __u32 attach_type; __u32 attach_flags; - __u32 replace_bpf_fd; /* previously attached eBPF - * program to replace if - * BPF_F_REPLACE is used - */ + __u32 replace_bpf_fd; + union { + __u32 relative_fd; + __u32 relative_id; + }; + __u64 expected_revision; }; struct { /* anonymous struct used by BPF_PROG_TEST_RUN command */ @@ -597,6 +1504,7 @@ union bpf_attr { __aligned_u64 ctx_out; __u32 flags; __u32 cpu; + __u32 batch_size; } test; struct { /* anonymous struct used by BPF_*_GET_*_ID */ @@ -618,12 +1526,26 @@ union bpf_attr { } info; struct { /* anonymous struct used by BPF_PROG_QUERY command */ - __u32 target_fd; /* container object to query */ + union { + __u32 target_fd; /* target object to query or ... */ + __u32 target_ifindex; /* target ifindex */ + }; __u32 attach_type; __u32 query_flags; __u32 attach_flags; __aligned_u64 prog_ids; - __u32 prog_cnt; + union { + __u32 prog_cnt; + __u32 count; + }; + __u32 :32; + /* output: per-program attach_flags. + * not allowed to be set during effective query. + */ + __aligned_u64 prog_attach_flags; + __aligned_u64 link_ids; + __aligned_u64 link_attach_flags; + __u64 revision; } query; struct { /* anonymous struct used by BPF_RAW_TRACEPOINT_OPEN command */ @@ -637,6 +1559,11 @@ union bpf_attr { __u32 btf_size; __u32 btf_log_size; __u32 btf_log_level; + /* output: actual total log contents size (including termintaing zero). + * It could be both larger than original log_size (if log was + * truncated), or smaller (if log buffer wasn't filled completely). + */ + __u32 btf_log_true_size; }; struct { @@ -656,30 +1583,89 @@ union bpf_attr { } task_fd_query; struct { /* struct used by BPF_LINK_CREATE command */ - __u32 prog_fd; /* eBPF program to attach */ union { - __u32 target_fd; /* object to attach to */ - __u32 target_ifindex; /* target ifindex */ + __u32 prog_fd; /* eBPF program to attach */ + __u32 map_fd; /* struct_ops to attach */ + }; + union { + __u32 target_fd; /* target object to attach to or ... */ + __u32 target_ifindex; /* target ifindex */ }; __u32 attach_type; /* attach type */ __u32 flags; /* extra flags */ union { - __u32 target_btf_id; /* btf_id of target to attach to */ + __u32 target_btf_id; /* btf_id of target to attach to */ struct { __aligned_u64 iter_info; /* extra bpf_iter_link_info */ __u32 iter_info_len; /* iter_info length */ }; + struct { + /* black box user-provided value passed through + * to BPF program at the execution time and + * accessible through bpf_get_attach_cookie() BPF helper + */ + __u64 bpf_cookie; + } perf_event; + struct { + __u32 flags; + __u32 cnt; + __aligned_u64 syms; + __aligned_u64 addrs; + __aligned_u64 cookies; + } kprobe_multi; + struct { + /* this is overlaid with the target_btf_id above. */ + __u32 target_btf_id; + /* black box user-provided value passed through + * to BPF program at the execution time and + * accessible through bpf_get_attach_cookie() BPF helper + */ + __u64 cookie; + } tracing; + struct { + __u32 pf; + __u32 hooknum; + __s32 priority; + __u32 flags; + } netfilter; + struct { + union { + __u32 relative_fd; + __u32 relative_id; + }; + __u64 expected_revision; + } tcx; + struct { + __aligned_u64 path; + __aligned_u64 offsets; + __aligned_u64 ref_ctr_offsets; + __aligned_u64 cookies; + __u32 cnt; + __u32 flags; + __u32 pid; + } uprobe_multi; }; } link_create; struct { /* struct used by BPF_LINK_UPDATE command */ __u32 link_fd; /* link fd */ - /* new program fd to update link with */ - __u32 new_prog_fd; + union { + /* new program fd to update link with */ + __u32 new_prog_fd; + /* new struct_ops map fd to update link with */ + __u32 new_map_fd; + }; __u32 flags; /* extra flags */ - /* expected link's program fd; is specified only if - * BPF_F_REPLACE flag is set in flags */ - __u32 old_prog_fd; + union { + /* expected link's program fd; is specified only if + * BPF_F_REPLACE flag is set in flags. + */ + __u32 old_prog_fd; + /* expected link's map fd; is specified only + * if BPF_F_REPLACE flag is set. + */ + __u32 old_map_fd; + }; } link_update; struct { @@ -708,7 +1694,7 @@ union bpf_attr { * parsed and used to produce a manual page. The workflow is the following, * and requires the rst2man utility: * - * $ ./scripts/bpf_helpers_doc.py \ + * $ ./scripts/bpf_doc.py \ * --filename include/uapi/linux/bpf.h > /tmp/bpf-helpers.rst * $ rst2man /tmp/bpf-helpers.rst > /tmp/bpf-helpers.7 * $ man /tmp/bpf-helpers.7 @@ -773,17 +1759,17 @@ union bpf_attr { * Description * This helper is a "printk()-like" facility for debugging. It * prints a message defined by format *fmt* (of size *fmt_size*) - * to file *\/sys/kernel/debug/tracing/trace* from DebugFS, if + * to file *\/sys/kernel/tracing/trace* from TraceFS, if * available. It can take up to three additional **u64** * arguments (as an eBPF helpers, the total number of arguments is * limited to five). * * Each time the helper is called, it appends a line to the trace. - * Lines are discarded while *\/sys/kernel/debug/tracing/trace* is - * open, use *\/sys/kernel/debug/tracing/trace_pipe* to avoid this. + * Lines are discarded while *\/sys/kernel/tracing/trace* is + * open, use *\/sys/kernel/tracing/trace_pipe* to avoid this. * The format of the trace is customizable, and the exact output * one will get depends on the options set in - * *\/sys/kernel/debug/tracing/trace_options* (see also the + * *\/sys/kernel/tracing/trace_options* (see also the * *README* file under the same directory). However, it usually * defaults to something like: * @@ -843,7 +1829,7 @@ union bpf_attr { * u32 bpf_get_smp_processor_id(void) * Description * Get the SMP (symmetric multiprocessing) processor id. Note that - * all programs run with preemption disabled, which means that the + * all programs run with migration disabled, which means that the * SMP processor id is stable during all the execution of the * program. * Return @@ -950,7 +1936,7 @@ union bpf_attr { * if the maximum number of tail calls has been reached for this * chain of programs. This limit is defined in the kernel by the * macro **MAX_TAIL_CALL_CNT** (not accessible to user space), - * which is currently set to 32. + * which is currently set to 33. * Return * 0 on success, or a negative error in case of failure. * @@ -976,9 +1962,13 @@ union bpf_attr { * performed again, if the helper is used in combination with * direct packet access. * Return - * 0 on success, or a negative error in case of failure. + * 0 on success, or a negative error in case of failure. Positive + * error indicates a potential drop or congestion in the target + * device. The particular positive error codes are not defined. * * u64 bpf_get_current_pid_tgid(void) + * Description + * Get the current pid and tgid. * Return * A 64-bit integer containing the current tgid and pid, and * created as such: @@ -986,6 +1976,8 @@ union bpf_attr { * *current_task*\ **->pid**. * * u64 bpf_get_current_uid_gid(void) + * Description + * Get the current uid and gid. * Return * A 64-bit integer containing the current GID and UID, and * created as such: *current_gid* **<< 32 \|** *current_uid*. @@ -1128,6 +2120,9 @@ union bpf_attr { * sending the packet. This flag was added for GRE * encapsulation, but might be used with other protocols * as well in the future. + * **BPF_F_NO_TUNNEL_KEY** + * Add a flag to tunnel metadata indicating that no tunnel + * key should be set in the resulting tunnel header. * * Here is a typical usage on the transmit path: * @@ -1460,6 +2455,8 @@ union bpf_attr { * The 32-bit hash. * * u64 bpf_get_current_task(void) + * Description + * Get the current task. * Return * A pointer to the current task struct. * @@ -1490,8 +2487,8 @@ union bpf_attr { * Return * The return value depends on the result of the test, and can be: * - * * 0, if current task belongs to the cgroup2. - * * 1, if current task does not belong to the cgroup2. + * * 1, if current task belongs to the cgroup2. + * * 0, if current task does not belong to the cgroup2. * * A negative error code, if an error occurred. * * long bpf_skb_change_tail(struct sk_buff *skb, u32 len, u64 flags) @@ -1523,7 +2520,8 @@ union bpf_attr { * Pull in non-linear data in case the *skb* is non-linear and not * all of *len* are part of the linear section. Make *len* bytes * from *skb* readable and writable. If a zero value is passed for - * *len*, then the whole length of the *skb* is pulled. + * *len*, then all bytes in the linear part of *skb* will be made + * readable and writable. * * This helper is only needed for reading and writing with direct * packet access. @@ -1573,6 +2571,8 @@ union bpf_attr { * indicate that the hash is outdated and to trigger a * recalculation the next time the kernel tries to access this * hash or when the **bpf_get_hash_recalc**\ () helper is called. + * Return + * void. * * long bpf_get_numa_node_id(void) * Description @@ -1644,24 +2644,34 @@ union bpf_attr { * networking traffic statistics as it provides a global socket * identifier that can be assumed unique. * Return - * A 8-byte long non-decreasing number on success, or 0 if the - * socket field is missing inside *skb*. + * A 8-byte long unique number on success, or 0 if the socket + * field is missing inside *skb*. * * u64 bpf_get_socket_cookie(struct bpf_sock_addr *ctx) * Description * Equivalent to bpf_get_socket_cookie() helper that accepts * *skb*, but gets socket from **struct bpf_sock_addr** context. * Return - * A 8-byte long non-decreasing number. + * A 8-byte long unique number. * * u64 bpf_get_socket_cookie(struct bpf_sock_ops *ctx) * Description * Equivalent to **bpf_get_socket_cookie**\ () helper that accepts * *skb*, but gets socket from **struct bpf_sock_ops** context. * Return - * A 8-byte long non-decreasing number. + * A 8-byte long unique number. + * + * u64 bpf_get_socket_cookie(struct sock *sk) + * Description + * Equivalent to **bpf_get_socket_cookie**\ () helper that accepts + * *sk*, but gets socket from a BTF **struct sock**. This helper + * also works for sleepable programs. + * Return + * A 8-byte long unique number or 0 if *sk* is NULL. * * u32 bpf_get_socket_uid(struct sk_buff *skb) + * Description + * Get the owner UID of the socked associated to *skb*. * Return * The owner UID of the socket associated to *skb*. If the socket * is **NULL**, or if it is not a full socket (i.e. if it is a @@ -1696,14 +2706,19 @@ union bpf_attr { * * **SOL_SOCKET**, which supports the following *optname*\ s: * **SO_RCVBUF**, **SO_SNDBUF**, **SO_MAX_PACING_RATE**, * **SO_PRIORITY**, **SO_RCVLOWAT**, **SO_MARK**, - * **SO_BINDTODEVICE**, **SO_KEEPALIVE**. + * **SO_BINDTODEVICE**, **SO_KEEPALIVE**, **SO_REUSEADDR**, + * **SO_REUSEPORT**, **SO_BINDTOIFINDEX**, **SO_TXREHASH**. * * **IPPROTO_TCP**, which supports the following *optname*\ s: * **TCP_CONGESTION**, **TCP_BPF_IW**, * **TCP_BPF_SNDCWND_CLAMP**, **TCP_SAVE_SYN**, * **TCP_KEEPIDLE**, **TCP_KEEPINTVL**, **TCP_KEEPCNT**, - * **TCP_SYNCNT**, **TCP_USER_TIMEOUT**, **TCP_NOTSENT_LOWAT**. + * **TCP_SYNCNT**, **TCP_USER_TIMEOUT**, **TCP_NOTSENT_LOWAT**, + * **TCP_NODELAY**, **TCP_MAXSEG**, **TCP_WINDOW_CLAMP**, + * **TCP_THIN_LINEAR_TIMEOUTS**, **TCP_BPF_DELACK_MAX**, + * **TCP_BPF_RTO_MIN**. * * **IPPROTO_IP**, which supports *optname* **IP_TOS**. - * * **IPPROTO_IPV6**, which supports *optname* **IPV6_TCLASS**. + * * **IPPROTO_IPV6**, which supports the following *optname*\ s: + * **IPV6_TCLASS**, **IPV6_AUTOFLOWLABEL**. * Return * 0 on success, or a negative error in case of failure. * @@ -1722,10 +2737,12 @@ union bpf_attr { * There are two supported modes at this time: * * * **BPF_ADJ_ROOM_MAC**: Adjust room at the mac layer - * (room space is added or removed below the layer 2 header). + * (room space is added or removed between the layer 2 and + * layer 3 headers). * * * **BPF_ADJ_ROOM_NET**: Adjust room at the network layer - * (room space is added or removed below the layer 3 header). + * (room space is added or removed between the layer 3 and + * layer 4 headers). * * The following flags are supported at this time: * @@ -1745,6 +2762,15 @@ union bpf_attr { * Use with ENCAP_L3/L4 flags to further specify the tunnel * type; *len* is the length of the inner MAC header. * + * * **BPF_F_ADJ_ROOM_ENCAP_L2_ETH**: + * Use with BPF_F_ADJ_ROOM_ENCAP_L2 flag to further specify the + * L2 type as Ethernet. + * + * * **BPF_F_ADJ_ROOM_DECAP_L3_IPV4**, + * **BPF_F_ADJ_ROOM_DECAP_L3_IPV6**: + * Indicate the new IP header version after decapsulating the outer + * IP header. Used when the inner and outer IP versions are different. + * * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be @@ -1753,7 +2779,7 @@ union bpf_attr { * Return * 0 on success, or a negative error in case of failure. * - * long bpf_redirect_map(struct bpf_map *map, u32 key, u64 flags) + * long bpf_redirect_map(struct bpf_map *map, u64 key, u64 flags) * Description * Redirect the packet to the endpoint referenced by *map* at * index *key*. Depending on its type, this *map* can contain @@ -1765,8 +2791,12 @@ union bpf_attr { * The lower two bits of *flags* are used as the return code if * the map lookup fails. This is so that the return value can be * one of the XDP program return codes up to **XDP_TX**, as chosen - * by the caller. Any higher bits in the *flags* argument must be - * unset. + * by the caller. The higher bits of *flags* can be set to + * BPF_F_BROADCAST or BPF_F_EXCLUDE_INGRESS as defined below. + * + * With BPF_F_BROADCAST the packet will be broadcasted to all the + * interfaces in the map, with BPF_F_EXCLUDE_INGRESS the ingress + * interface will be excluded when do broadcasting. * * See also **bpf_redirect**\ (), which only supports redirecting * to an ifindex, but doesn't require a map to do so. @@ -1885,7 +2915,7 @@ union bpf_attr { * * long bpf_perf_prog_read_value(struct bpf_perf_event_data *ctx, struct bpf_perf_event_value *buf, u32 buf_size) * Description - * For en eBPF program attached to a perf event, retrieve the + * For an eBPF program attached to a perf event, retrieve the * value of the event counter associated to *ctx* and store it in * the structure pointed by *buf* and of size *buf_size*. Enabled * and running times are also stored in the structure (see @@ -1910,12 +2940,10 @@ union bpf_attr { * and **BPF_CGROUP_INET6_CONNECT**. * * This helper actually implements a subset of **getsockopt()**. - * It supports the following *level*\ s: - * - * * **IPPROTO_TCP**, which supports *optname* - * **TCP_CONGESTION**. - * * **IPPROTO_IP**, which supports *optname* **IP_TOS**. - * * **IPPROTO_IPV6**, which supports *optname* **IPV6_TCLASS**. + * It supports the same set of *optname*\ s that is supported by + * the **bpf_setsockopt**\ () helper. The exceptions are + * **TCP_BPF_*** is **bpf_setsockopt**\ () only and + * **TCP_SAVED_SYN** is **bpf_getsockopt**\ () only. * Return * 0 on success, or a negative error in case of failure. * @@ -2149,8 +3177,18 @@ union bpf_attr { * **BPF_F_USER_STACK** * Collect a user space stack instead of a kernel stack. * **BPF_F_USER_BUILD_ID** - * Collect buildid+offset instead of ips for user stack, - * only valid if **BPF_F_USER_STACK** is also specified. + * Collect (build_id, file_offset) instead of ips for user + * stack, only valid if **BPF_F_USER_STACK** is also + * specified. + * + * *file_offset* is an offset relative to the beginning + * of the executable or shared object file backing the vma + * which the *ip* falls in. It is *not* an offset relative + * to that object's base address. Accordingly, it must be + * adjusted by adding (sh_addr - sh_offset), where + * sh_{addr,offset} correspond to the executable section + * containing *file_offset* in the object, for comparisons + * to symbols' st_value to be valid. * * **bpf_get_stack**\ () can collect up to * **PERF_MAX_STACK_DEPTH** both kernel and user frames, subject @@ -2163,8 +3201,8 @@ union bpf_attr { * * # sysctl kernel.perf_event_max_stack= * Return - * A non-negative value equal to or less than *size* on success, - * or a negative error in case of failure. + * The non-negative copied *buf* length equal to or less than + * *size* on success, or a negative error in case of failure. * * long bpf_skb_load_bytes_relative(const void *skb, u32 offset, void *to, u32 len, u32 start_header) * Description @@ -2207,9 +3245,18 @@ union bpf_attr { * **BPF_FIB_LOOKUP_DIRECT** * Do a direct table lookup vs full lookup using FIB * rules. + * **BPF_FIB_LOOKUP_TBID** + * Used with BPF_FIB_LOOKUP_DIRECT. + * Use the routing table ID present in *params*->tbid + * for the fib lookup. * **BPF_FIB_LOOKUP_OUTPUT** * Perform lookup from an egress perspective (default is * ingress). + * **BPF_FIB_LOOKUP_SKIP_NEIGH** + * Skip the neighbour table lookup. *params*->dmac + * and *params*->smac will not be set as output. A common + * use case is to call **bpf_redirect_neigh**\ () after + * doing **bpf_fib_lookup**\ (). * * *ctx* is either **struct xdp_md** for XDP programs or * **struct sk_buff** tc cls_act programs. @@ -2219,6 +3266,9 @@ union bpf_attr { * * > 0 one of **BPF_FIB_LKUP_RET_** codes explaining why the * packet is not forwarded or needs assist from full stack * + * If lookup fails with BPF_FIB_LKUP_RET_FRAG_NEEDED, then the MTU + * was exceeded and output params->mtu_result contains the MTU. + * * long bpf_sock_hash_update(struct bpf_sock_ops *skops, struct bpf_map *map, void *key, u64 flags) * Description * Add an entry to, or update a sockhash *map* referencing sockets. @@ -2425,6 +3475,9 @@ union bpf_attr { * The id is returned or 0 in case the id could not be retrieved. * * u64 bpf_get_current_cgroup_id(void) + * Description + * Get the current cgroup id based on the cgroup within which + * the current task is running. * Return * A 64-bit integer containing the current cgroup id based * on the cgroup within which the current task is running. @@ -2442,7 +3495,7 @@ union bpf_attr { * running simultaneously. * * A user should care about the synchronization by himself. - * For example, by using the **BPF_STX_XADD** instruction to alter + * For example, by using the **BPF_ATOMIC** instructions to alter * the shared data. * Return * A pointer to the local storage area. @@ -2450,7 +3503,7 @@ union bpf_attr { * long bpf_sk_select_reuseport(struct sk_reuseport_md *reuse, struct bpf_map *map, void *key, u64 flags) * Description * Select a **SO_REUSEPORT** socket from a - * **BPF_MAP_TYPE_REUSEPORT_ARRAY** *map*. + * **BPF_MAP_TYPE_REUSEPORT_SOCKARRAY** *map*. * It checks the selected socket is matching the incoming * request in the socket buffer. * Return @@ -2735,10 +3788,11 @@ union bpf_attr { * * *iph* points to the start of the IPv4 or IPv6 header, while * *iph_len* contains **sizeof**\ (**struct iphdr**) or - * **sizeof**\ (**struct ip6hdr**). + * **sizeof**\ (**struct ipv6hdr**). * * *th* points to the start of the TCP header, while *th_len* - * contains **sizeof**\ (**struct tcphdr**). + * contains the length of the TCP header (at least + * **sizeof**\ (**struct tcphdr**)). * Return * 0 if *iph* and *th* are a valid SYN cookie ACK, or a negative * error otherwise. @@ -2921,10 +3975,11 @@ union bpf_attr { * * *iph* points to the start of the IPv4 or IPv6 header, while * *iph_len* contains **sizeof**\ (**struct iphdr**) or - * **sizeof**\ (**struct ip6hdr**). + * **sizeof**\ (**struct ipv6hdr**). * * *th* points to the start of the TCP header, while *th_len* - * contains the length of the TCP header. + * contains the length of the TCP header with options (at least + * **sizeof**\ (**struct tcphdr**)). * Return * On success, lower 32 bits hold the generated SYN cookie in * followed by 16 bits which hold the MSS value for that cookie, @@ -2987,10 +4042,10 @@ union bpf_attr { * string length is larger than *size*, just *size*-1 bytes are * copied and the last byte is set to NUL. * - * On success, the length of the copied string is returned. This - * makes this helper useful in tracing programs for reading - * strings, and more importantly to get its length at runtime. See - * the following snippet: + * On success, returns the number of bytes that were written, + * including the terminal NUL. This makes this helper useful in + * tracing programs for reading strings, and more importantly to + * get its length at runtime. See the following snippet: * * :: * @@ -3018,7 +4073,7 @@ union bpf_attr { * **->mm->env_start**: using this helper and the return value, * one can quickly iterate at the right offset of the memory area. * Return - * On success, the strictly positive length of the string, + * On success, the strictly positive length of the output string, * including the trailing NUL character. On error, a negative * value. * @@ -3171,9 +4226,6 @@ union bpf_attr { * **-EOPNOTSUPP** if the operation is not supported, for example * a call from outside of TC ingress. * - * **-ESOCKTNOSUPPORT** if the socket type is not supported - * (reuseport). - * * long bpf_sk_assign(struct bpf_sk_lookup *ctx, struct bpf_sock *sk, u64 flags) * Description * Helper is overloaded depending on BPF program type. This @@ -3241,7 +4293,7 @@ union bpf_attr { * arguments. The *data* are a **u64** array and corresponding format string * values are stored in the array. For strings and pointers where pointees * are accessed, only the pointer values are stored in the *data* array. - * The *data_len* is the size of *data* in bytes. + * The *data_len* is the size of *data* in bytes - must be a multiple of 8. * * Formats **%s**, **%p{i,I}{4,6}** requires to read kernel memory. * Reading kernel memory may fail due to either invalid address or @@ -3310,12 +4362,20 @@ union bpf_attr { * of new data availability is sent. * If **BPF_RB_FORCE_WAKEUP** is specified in *flags*, notification * of new data availability is sent unconditionally. + * If **0** is specified in *flags*, an adaptive notification + * of new data availability is sent. + * + * An adaptive notification is a notification sent whenever the user-space + * process has caught up and consumed all available payloads. In case the user-space + * process is still processing a previous payload, then no notification is needed + * as it will process the newly added payload automatically. * Return * 0 on success, or a negative error in case of failure. * * void *bpf_ringbuf_reserve(void *ringbuf, u64 size, u64 flags) * Description * Reserve *size* bytes of payload in a ring buffer *ringbuf*. + * *flags* must be 0. * Return * Valid pointer with *size* bytes of memory available; NULL, * otherwise. @@ -3327,6 +4387,10 @@ union bpf_attr { * of new data availability is sent. * If **BPF_RB_FORCE_WAKEUP** is specified in *flags*, notification * of new data availability is sent unconditionally. + * If **0** is specified in *flags*, an adaptive notification + * of new data availability is sent. + * + * See 'bpf_ringbuf_output()' for the definition of adaptive notification. * Return * Nothing. Always succeeds. * @@ -3337,6 +4401,10 @@ union bpf_attr { * of new data availability is sent. * If **BPF_RB_FORCE_WAKEUP** is specified in *flags*, notification * of new data availability is sent unconditionally. + * If **0** is specified in *flags*, an adaptive notification + * of new data availability is sent. + * + * See 'bpf_ringbuf_output()' for the definition of adaptive notification. * Return * Nothing. Always succeeds. * @@ -3448,8 +4516,8 @@ union bpf_attr { * * # sysctl kernel.perf_event_max_stack= * Return - * A non-negative value equal to or less than *size* on success, - * or a negative error in case of failure. + * The non-negative copied *buf* length equal to or less than + * *size* on success, or a negative error in case of failure. * * long bpf_load_hdr_opt(struct bpf_sock_ops *skops, void *searchby_res, u32 len, u64 flags) * Description @@ -3542,48 +4610,1018 @@ union bpf_attr { * * **-EEXIST** if the option already exists. * - * **-EFAULT** on failrue to parse the existing header options. + * **-EFAULT** on failure to parse the existing header options. + * + * **-EPERM** if the helper cannot be used under the current + * *skops*\ **->op**. + * + * long bpf_reserve_hdr_opt(struct bpf_sock_ops *skops, u32 len, u64 flags) + * Description + * Reserve *len* bytes for the bpf header option. The + * space will be used by **bpf_store_hdr_opt**\ () later in + * **BPF_SOCK_OPS_WRITE_HDR_OPT_CB**. + * + * If **bpf_reserve_hdr_opt**\ () is called multiple times, + * the total number of bytes will be reserved. + * + * This helper can only be called during + * **BPF_SOCK_OPS_HDR_OPT_LEN_CB**. + * + * Return + * 0 on success, or negative error in case of failure: + * + * **-EINVAL** if a parameter is invalid. + * + * **-ENOSPC** if there is not enough space in the header. + * + * **-EPERM** if the helper cannot be used under the current + * *skops*\ **->op**. + * + * void *bpf_inode_storage_get(struct bpf_map *map, void *inode, void *value, u64 flags) + * Description + * Get a bpf_local_storage from an *inode*. + * + * Logically, it could be thought of as getting the value from + * a *map* with *inode* as the **key**. From this + * perspective, the usage is not much different from + * **bpf_map_lookup_elem**\ (*map*, **&**\ *inode*) except this + * helper enforces the key must be an inode and the map must also + * be a **BPF_MAP_TYPE_INODE_STORAGE**. + * + * Underneath, the value is stored locally at *inode* instead of + * the *map*. The *map* is used as the bpf-local-storage + * "type". The bpf-local-storage "type" (i.e. the *map*) is + * searched against all bpf_local_storage residing at *inode*. + * + * An optional *flags* (**BPF_LOCAL_STORAGE_GET_F_CREATE**) can be + * used such that a new bpf_local_storage will be + * created if one does not exist. *value* can be used + * together with **BPF_LOCAL_STORAGE_GET_F_CREATE** to specify + * the initial value of a bpf_local_storage. If *value* is + * **NULL**, the new bpf_local_storage will be zero initialized. + * Return + * A bpf_local_storage pointer is returned on success. + * + * **NULL** if not found or there was an error in adding + * a new bpf_local_storage. + * + * int bpf_inode_storage_delete(struct bpf_map *map, void *inode) + * Description + * Delete a bpf_local_storage from an *inode*. + * Return + * 0 on success. + * + * **-ENOENT** if the bpf_local_storage cannot be found. + * + * long bpf_d_path(struct path *path, char *buf, u32 sz) + * Description + * Return full path for given **struct path** object, which + * needs to be the kernel BTF *path* object. The path is + * returned in the provided buffer *buf* of size *sz* and + * is zero terminated. + * + * Return + * On success, the strictly positive length of the string, + * including the trailing NUL character. On error, a negative + * value. + * + * long bpf_copy_from_user(void *dst, u32 size, const void *user_ptr) + * Description + * Read *size* bytes from user space address *user_ptr* and store + * the data in *dst*. This is a wrapper of **copy_from_user**\ (). + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_snprintf_btf(char *str, u32 str_size, struct btf_ptr *ptr, u32 btf_ptr_size, u64 flags) + * Description + * Use BTF to store a string representation of *ptr*->ptr in *str*, + * using *ptr*->type_id. This value should specify the type + * that *ptr*->ptr points to. LLVM __builtin_btf_type_id(type, 1) + * can be used to look up vmlinux BTF type ids. Traversing the + * data structure using BTF, the type information and values are + * stored in the first *str_size* - 1 bytes of *str*. Safe copy of + * the pointer data is carried out to avoid kernel crashes during + * operation. Smaller types can use string space on the stack; + * larger programs can use map data to store the string + * representation. + * + * The string can be subsequently shared with userspace via + * bpf_perf_event_output() or ring buffer interfaces. + * bpf_trace_printk() is to be avoided as it places too small + * a limit on string size to be useful. + * + * *flags* is a combination of + * + * **BTF_F_COMPACT** + * no formatting around type information + * **BTF_F_NONAME** + * no struct/union member names/types + * **BTF_F_PTR_RAW** + * show raw (unobfuscated) pointer values; + * equivalent to printk specifier %px. + * **BTF_F_ZERO** + * show zero-valued struct/union members; they + * are not displayed by default + * + * Return + * The number of bytes that were written (or would have been + * written if output had to be truncated due to string size), + * or a negative error in cases of failure. + * + * long bpf_seq_printf_btf(struct seq_file *m, struct btf_ptr *ptr, u32 ptr_size, u64 flags) + * Description + * Use BTF to write to seq_write a string representation of + * *ptr*->ptr, using *ptr*->type_id as per bpf_snprintf_btf(). + * *flags* are identical to those used for bpf_snprintf_btf. + * Return + * 0 on success or a negative error in case of failure. + * + * u64 bpf_skb_cgroup_classid(struct sk_buff *skb) + * Description + * See **bpf_get_cgroup_classid**\ () for the main description. + * This helper differs from **bpf_get_cgroup_classid**\ () in that + * the cgroup v1 net_cls class is retrieved only from the *skb*'s + * associated socket instead of the current process. + * Return + * The id is returned or 0 in case the id could not be retrieved. + * + * long bpf_redirect_neigh(u32 ifindex, struct bpf_redir_neigh *params, int plen, u64 flags) + * Description + * Redirect the packet to another net device of index *ifindex* + * and fill in L2 addresses from neighboring subsystem. This helper + * is somewhat similar to **bpf_redirect**\ (), except that it + * populates L2 addresses as well, meaning, internally, the helper + * relies on the neighbor lookup for the L2 address of the nexthop. + * + * The helper will perform a FIB lookup based on the skb's + * networking header to get the address of the next hop, unless + * this is supplied by the caller in the *params* argument. The + * *plen* argument indicates the len of *params* and should be set + * to 0 if *params* is NULL. + * + * The *flags* argument is reserved and must be 0. The helper is + * currently only supported for tc BPF program types, and enabled + * for IPv4 and IPv6 protocols. + * Return + * The helper returns **TC_ACT_REDIRECT** on success or + * **TC_ACT_SHOT** on error. + * + * void *bpf_per_cpu_ptr(const void *percpu_ptr, u32 cpu) + * Description + * Take a pointer to a percpu ksym, *percpu_ptr*, and return a + * pointer to the percpu kernel variable on *cpu*. A ksym is an + * extern variable decorated with '__ksym'. For ksym, there is a + * global var (either static or global) defined of the same name + * in the kernel. The ksym is percpu if the global var is percpu. + * The returned pointer points to the global percpu var on *cpu*. + * + * bpf_per_cpu_ptr() has the same semantic as per_cpu_ptr() in the + * kernel, except that bpf_per_cpu_ptr() may return NULL. This + * happens if *cpu* is larger than nr_cpu_ids. The caller of + * bpf_per_cpu_ptr() must check the returned value. + * Return + * A pointer pointing to the kernel percpu variable on *cpu*, or + * NULL, if *cpu* is invalid. + * + * void *bpf_this_cpu_ptr(const void *percpu_ptr) + * Description + * Take a pointer to a percpu ksym, *percpu_ptr*, and return a + * pointer to the percpu kernel variable on this cpu. See the + * description of 'ksym' in **bpf_per_cpu_ptr**\ (). + * + * bpf_this_cpu_ptr() has the same semantic as this_cpu_ptr() in + * the kernel. Different from **bpf_per_cpu_ptr**\ (), it would + * never return NULL. + * Return + * A pointer pointing to the kernel percpu variable on this cpu. + * + * long bpf_redirect_peer(u32 ifindex, u64 flags) + * Description + * Redirect the packet to another net device of index *ifindex*. + * This helper is somewhat similar to **bpf_redirect**\ (), except + * that the redirection happens to the *ifindex*' peer device and + * the netns switch takes place from ingress to ingress without + * going through the CPU's backlog queue. + * + * The *flags* argument is reserved and must be 0. The helper is + * currently only supported for tc BPF program types at the ingress + * hook and for veth device types. The peer device must reside in a + * different network namespace. + * Return + * The helper returns **TC_ACT_REDIRECT** on success or + * **TC_ACT_SHOT** on error. + * + * void *bpf_task_storage_get(struct bpf_map *map, struct task_struct *task, void *value, u64 flags) + * Description + * Get a bpf_local_storage from the *task*. + * + * Logically, it could be thought of as getting the value from + * a *map* with *task* as the **key**. From this + * perspective, the usage is not much different from + * **bpf_map_lookup_elem**\ (*map*, **&**\ *task*) except this + * helper enforces the key must be a task_struct and the map must also + * be a **BPF_MAP_TYPE_TASK_STORAGE**. + * + * Underneath, the value is stored locally at *task* instead of + * the *map*. The *map* is used as the bpf-local-storage + * "type". The bpf-local-storage "type" (i.e. the *map*) is + * searched against all bpf_local_storage residing at *task*. + * + * An optional *flags* (**BPF_LOCAL_STORAGE_GET_F_CREATE**) can be + * used such that a new bpf_local_storage will be + * created if one does not exist. *value* can be used + * together with **BPF_LOCAL_STORAGE_GET_F_CREATE** to specify + * the initial value of a bpf_local_storage. If *value* is + * **NULL**, the new bpf_local_storage will be zero initialized. + * Return + * A bpf_local_storage pointer is returned on success. + * + * **NULL** if not found or there was an error in adding + * a new bpf_local_storage. + * + * long bpf_task_storage_delete(struct bpf_map *map, struct task_struct *task) + * Description + * Delete a bpf_local_storage from a *task*. + * Return + * 0 on success. + * + * **-ENOENT** if the bpf_local_storage cannot be found. + * + * struct task_struct *bpf_get_current_task_btf(void) + * Description + * Return a BTF pointer to the "current" task. + * This pointer can also be used in helpers that accept an + * *ARG_PTR_TO_BTF_ID* of type *task_struct*. + * Return + * Pointer to the current task. + * + * long bpf_bprm_opts_set(struct linux_binprm *bprm, u64 flags) + * Description + * Set or clear certain options on *bprm*: + * + * **BPF_F_BPRM_SECUREEXEC** Set the secureexec bit + * which sets the **AT_SECURE** auxv for glibc. The bit + * is cleared if the flag is not specified. + * Return + * **-EINVAL** if invalid *flags* are passed, zero otherwise. + * + * u64 bpf_ktime_get_coarse_ns(void) + * Description + * Return a coarse-grained version of the time elapsed since + * system boot, in nanoseconds. Does not include time the system + * was suspended. + * + * See: **clock_gettime**\ (**CLOCK_MONOTONIC_COARSE**) + * Return + * Current *ktime*. + * + * long bpf_ima_inode_hash(struct inode *inode, void *dst, u32 size) + * Description + * Returns the stored IMA hash of the *inode* (if it's available). + * If the hash is larger than *size*, then only *size* + * bytes will be copied to *dst* + * Return + * The **hash_algo** is returned on success, + * **-EOPNOTSUP** if IMA is disabled or **-EINVAL** if + * invalid arguments are passed. + * + * struct socket *bpf_sock_from_file(struct file *file) + * Description + * If the given file represents a socket, returns the associated + * socket. + * Return + * A pointer to a struct socket on success or NULL if the file is + * not a socket. + * + * long bpf_check_mtu(void *ctx, u32 ifindex, u32 *mtu_len, s32 len_diff, u64 flags) + * Description + * Check packet size against exceeding MTU of net device (based + * on *ifindex*). This helper will likely be used in combination + * with helpers that adjust/change the packet size. + * + * The argument *len_diff* can be used for querying with a planned + * size change. This allows to check MTU prior to changing packet + * ctx. Providing a *len_diff* adjustment that is larger than the + * actual packet size (resulting in negative packet size) will in + * principle not exceed the MTU, which is why it is not considered + * a failure. Other BPF helpers are needed for performing the + * planned size change; therefore the responsibility for catching + * a negative packet size belongs in those helpers. + * + * Specifying *ifindex* zero means the MTU check is performed + * against the current net device. This is practical if this isn't + * used prior to redirect. + * + * On input *mtu_len* must be a valid pointer, else verifier will + * reject BPF program. If the value *mtu_len* is initialized to + * zero then the ctx packet size is use. When value *mtu_len* is + * provided as input this specify the L3 length that the MTU check + * is done against. Remember XDP and TC length operate at L2, but + * this value is L3 as this correlate to MTU and IP-header tot_len + * values which are L3 (similar behavior as bpf_fib_lookup). + * + * The Linux kernel route table can configure MTUs on a more + * specific per route level, which is not provided by this helper. + * For route level MTU checks use the **bpf_fib_lookup**\ () + * helper. + * + * *ctx* is either **struct xdp_md** for XDP programs or + * **struct sk_buff** for tc cls_act programs. + * + * The *flags* argument can be a combination of one or more of the + * following values: + * + * **BPF_MTU_CHK_SEGS** + * This flag will only works for *ctx* **struct sk_buff**. + * If packet context contains extra packet segment buffers + * (often knows as GSO skb), then MTU check is harder to + * check at this point, because in transmit path it is + * possible for the skb packet to get re-segmented + * (depending on net device features). This could still be + * a MTU violation, so this flag enables performing MTU + * check against segments, with a different violation + * return code to tell it apart. Check cannot use len_diff. + * + * On return *mtu_len* pointer contains the MTU value of the net + * device. Remember the net device configured MTU is the L3 size, + * which is returned here and XDP and TC length operate at L2. + * Helper take this into account for you, but remember when using + * MTU value in your BPF-code. + * + * Return + * * 0 on success, and populate MTU value in *mtu_len* pointer. + * + * * < 0 if any input argument is invalid (*mtu_len* not updated) + * + * MTU violations return positive values, but also populate MTU + * value in *mtu_len* pointer, as this can be needed for + * implementing PMTU handing: + * + * * **BPF_MTU_CHK_RET_FRAG_NEEDED** + * * **BPF_MTU_CHK_RET_SEGS_TOOBIG** + * + * long bpf_for_each_map_elem(struct bpf_map *map, void *callback_fn, void *callback_ctx, u64 flags) + * Description + * For each element in **map**, call **callback_fn** function with + * **map**, **callback_ctx** and other map-specific parameters. + * The **callback_fn** should be a static function and + * the **callback_ctx** should be a pointer to the stack. + * The **flags** is used to control certain aspects of the helper. + * Currently, the **flags** must be 0. + * + * The following are a list of supported map types and their + * respective expected callback signatures: + * + * BPF_MAP_TYPE_HASH, BPF_MAP_TYPE_PERCPU_HASH, + * BPF_MAP_TYPE_LRU_HASH, BPF_MAP_TYPE_LRU_PERCPU_HASH, + * BPF_MAP_TYPE_ARRAY, BPF_MAP_TYPE_PERCPU_ARRAY + * + * long (\*callback_fn)(struct bpf_map \*map, const void \*key, void \*value, void \*ctx); + * + * For per_cpu maps, the map_value is the value on the cpu where the + * bpf_prog is running. + * + * If **callback_fn** return 0, the helper will continue to the next + * element. If return value is 1, the helper will skip the rest of + * elements and return. Other return values are not used now. + * + * Return + * The number of traversed map elements for success, **-EINVAL** for + * invalid **flags**. + * + * long bpf_snprintf(char *str, u32 str_size, const char *fmt, u64 *data, u32 data_len) + * Description + * Outputs a string into the **str** buffer of size **str_size** + * based on a format string stored in a read-only map pointed by + * **fmt**. + * + * Each format specifier in **fmt** corresponds to one u64 element + * in the **data** array. For strings and pointers where pointees + * are accessed, only the pointer values are stored in the *data* + * array. The *data_len* is the size of *data* in bytes - must be + * a multiple of 8. + * + * Formats **%s** and **%p{i,I}{4,6}** require to read kernel + * memory. Reading kernel memory may fail due to either invalid + * address or valid address but requiring a major memory fault. If + * reading kernel memory fails, the string for **%s** will be an + * empty string, and the ip address for **%p{i,I}{4,6}** will be 0. + * Not returning error to bpf program is consistent with what + * **bpf_trace_printk**\ () does for now. + * + * Return + * The strictly positive length of the formatted string, including + * the trailing zero character. If the return value is greater than + * **str_size**, **str** contains a truncated string, guaranteed to + * be zero-terminated except when **str_size** is 0. + * + * Or **-EBUSY** if the per-CPU memory copy buffer is busy. + * + * long bpf_sys_bpf(u32 cmd, void *attr, u32 attr_size) + * Description + * Execute bpf syscall with given arguments. + * Return + * A syscall result. + * + * long bpf_btf_find_by_name_kind(char *name, int name_sz, u32 kind, int flags) + * Description + * Find BTF type with given name and kind in vmlinux BTF or in module's BTFs. + * Return + * Returns btf_id and btf_obj_fd in lower and upper 32 bits. + * + * long bpf_sys_close(u32 fd) + * Description + * Execute close syscall for given FD. + * Return + * A syscall result. + * + * long bpf_timer_init(struct bpf_timer *timer, struct bpf_map *map, u64 flags) + * Description + * Initialize the timer. + * First 4 bits of *flags* specify clockid. + * Only CLOCK_MONOTONIC, CLOCK_REALTIME, CLOCK_BOOTTIME are allowed. + * All other bits of *flags* are reserved. + * The verifier will reject the program if *timer* is not from + * the same *map*. + * Return + * 0 on success. + * **-EBUSY** if *timer* is already initialized. + * **-EINVAL** if invalid *flags* are passed. + * **-EPERM** if *timer* is in a map that doesn't have any user references. + * The user space should either hold a file descriptor to a map with timers + * or pin such map in bpffs. When map is unpinned or file descriptor is + * closed all timers in the map will be cancelled and freed. + * + * long bpf_timer_set_callback(struct bpf_timer *timer, void *callback_fn) + * Description + * Configure the timer to call *callback_fn* static function. + * Return + * 0 on success. + * **-EINVAL** if *timer* was not initialized with bpf_timer_init() earlier. + * **-EPERM** if *timer* is in a map that doesn't have any user references. + * The user space should either hold a file descriptor to a map with timers + * or pin such map in bpffs. When map is unpinned or file descriptor is + * closed all timers in the map will be cancelled and freed. + * + * long bpf_timer_start(struct bpf_timer *timer, u64 nsecs, u64 flags) + * Description + * Set timer expiration N nanoseconds from the current time. The + * configured callback will be invoked in soft irq context on some cpu + * and will not repeat unless another bpf_timer_start() is made. + * In such case the next invocation can migrate to a different cpu. + * Since struct bpf_timer is a field inside map element the map + * owns the timer. The bpf_timer_set_callback() will increment refcnt + * of BPF program to make sure that callback_fn code stays valid. + * When user space reference to a map reaches zero all timers + * in a map are cancelled and corresponding program's refcnts are + * decremented. This is done to make sure that Ctrl-C of a user + * process doesn't leave any timers running. If map is pinned in + * bpffs the callback_fn can re-arm itself indefinitely. + * bpf_map_update/delete_elem() helpers and user space sys_bpf commands + * cancel and free the timer in the given map element. + * The map can contain timers that invoke callback_fn-s from different + * programs. The same callback_fn can serve different timers from + * different maps if key/value layout matches across maps. + * Every bpf_timer_set_callback() can have different callback_fn. + * + * *flags* can be one of: + * + * **BPF_F_TIMER_ABS** + * Start the timer in absolute expire value instead of the + * default relative one. + * + * Return + * 0 on success. + * **-EINVAL** if *timer* was not initialized with bpf_timer_init() earlier + * or invalid *flags* are passed. + * + * long bpf_timer_cancel(struct bpf_timer *timer) + * Description + * Cancel the timer and wait for callback_fn to finish if it was running. + * Return + * 0 if the timer was not active. + * 1 if the timer was active. + * **-EINVAL** if *timer* was not initialized with bpf_timer_init() earlier. + * **-EDEADLK** if callback_fn tried to call bpf_timer_cancel() on its + * own timer which would have led to a deadlock otherwise. + * + * u64 bpf_get_func_ip(void *ctx) + * Description + * Get address of the traced function (for tracing and kprobe programs). + * + * When called for kprobe program attached as uprobe it returns + * probe address for both entry and return uprobe. + * + * Return + * Address of the traced function for kprobe. + * 0 for kprobes placed within the function (not at the entry). + * Address of the probe for uprobe and return uprobe. + * + * u64 bpf_get_attach_cookie(void *ctx) + * Description + * Get bpf_cookie value provided (optionally) during the program + * attachment. It might be different for each individual + * attachment, even if BPF program itself is the same. + * Expects BPF program context *ctx* as a first argument. + * + * Supported for the following program types: + * - kprobe/uprobe; + * - tracepoint; + * - perf_event. + * Return + * Value specified by user at BPF link creation/attachment time + * or 0, if it was not specified. + * + * long bpf_task_pt_regs(struct task_struct *task) + * Description + * Get the struct pt_regs associated with **task**. + * Return + * A pointer to struct pt_regs. + * + * long bpf_get_branch_snapshot(void *entries, u32 size, u64 flags) + * Description + * Get branch trace from hardware engines like Intel LBR. The + * hardware engine is stopped shortly after the helper is + * called. Therefore, the user need to filter branch entries + * based on the actual use case. To capture branch trace + * before the trigger point of the BPF program, the helper + * should be called at the beginning of the BPF program. + * + * The data is stored as struct perf_branch_entry into output + * buffer *entries*. *size* is the size of *entries* in bytes. + * *flags* is reserved for now and must be zero. + * + * Return + * On success, number of bytes written to *buf*. On error, a + * negative value. + * + * **-EINVAL** if *flags* is not zero. + * + * **-ENOENT** if architecture does not support branch records. + * + * long bpf_trace_vprintk(const char *fmt, u32 fmt_size, const void *data, u32 data_len) + * Description + * Behaves like **bpf_trace_printk**\ () helper, but takes an array of u64 + * to format and can handle more format args as a result. + * + * Arguments are to be used as in **bpf_seq_printf**\ () helper. + * Return + * The number of bytes written to the buffer, or a negative error + * in case of failure. + * + * struct unix_sock *bpf_skc_to_unix_sock(void *sk) + * Description + * Dynamically cast a *sk* pointer to a *unix_sock* pointer. + * Return + * *sk* if casting is valid, or **NULL** otherwise. + * + * long bpf_kallsyms_lookup_name(const char *name, int name_sz, int flags, u64 *res) + * Description + * Get the address of a kernel symbol, returned in *res*. *res* is + * set to 0 if the symbol is not found. + * Return + * On success, zero. On error, a negative value. + * + * **-EINVAL** if *flags* is not zero. + * + * **-EINVAL** if string *name* is not the same size as *name_sz*. + * + * **-ENOENT** if symbol is not found. + * + * **-EPERM** if caller does not have permission to obtain kernel address. + * + * long bpf_find_vma(struct task_struct *task, u64 addr, void *callback_fn, void *callback_ctx, u64 flags) + * Description + * Find vma of *task* that contains *addr*, call *callback_fn* + * function with *task*, *vma*, and *callback_ctx*. + * The *callback_fn* should be a static function and + * the *callback_ctx* should be a pointer to the stack. + * The *flags* is used to control certain aspects of the helper. + * Currently, the *flags* must be 0. + * + * The expected callback signature is + * + * long (\*callback_fn)(struct task_struct \*task, struct vm_area_struct \*vma, void \*callback_ctx); + * + * Return + * 0 on success. + * **-ENOENT** if *task->mm* is NULL, or no vma contains *addr*. + * **-EBUSY** if failed to try lock mmap_lock. + * **-EINVAL** for invalid **flags**. + * + * long bpf_loop(u32 nr_loops, void *callback_fn, void *callback_ctx, u64 flags) + * Description + * For **nr_loops**, call **callback_fn** function + * with **callback_ctx** as the context parameter. + * The **callback_fn** should be a static function and + * the **callback_ctx** should be a pointer to the stack. + * The **flags** is used to control certain aspects of the helper. + * Currently, the **flags** must be 0. Currently, nr_loops is + * limited to 1 << 23 (~8 million) loops. + * + * long (\*callback_fn)(u32 index, void \*ctx); + * + * where **index** is the current index in the loop. The index + * is zero-indexed. + * + * If **callback_fn** returns 0, the helper will continue to the next + * loop. If return value is 1, the helper will skip the rest of + * the loops and return. Other return values are not used now, + * and will be rejected by the verifier. + * + * Return + * The number of loops performed, **-EINVAL** for invalid **flags**, + * **-E2BIG** if **nr_loops** exceeds the maximum number of loops. + * + * long bpf_strncmp(const char *s1, u32 s1_sz, const char *s2) + * Description + * Do strncmp() between **s1** and **s2**. **s1** doesn't need + * to be null-terminated and **s1_sz** is the maximum storage + * size of **s1**. **s2** must be a read-only string. + * Return + * An integer less than, equal to, or greater than zero + * if the first **s1_sz** bytes of **s1** is found to be + * less than, to match, or be greater than **s2**. + * + * long bpf_get_func_arg(void *ctx, u32 n, u64 *value) + * Description + * Get **n**-th argument register (zero based) of the traced function (for tracing programs) + * returned in **value**. + * + * Return + * 0 on success. + * **-EINVAL** if n >= argument register count of traced function. + * + * long bpf_get_func_ret(void *ctx, u64 *value) + * Description + * Get return value of the traced function (for tracing programs) + * in **value**. + * + * Return + * 0 on success. + * **-EOPNOTSUPP** for tracing programs other than BPF_TRACE_FEXIT or BPF_MODIFY_RETURN. + * + * long bpf_get_func_arg_cnt(void *ctx) + * Description + * Get number of registers of the traced function (for tracing programs) where + * function arguments are stored in these registers. + * + * Return + * The number of argument registers of the traced function. + * + * int bpf_get_retval(void) + * Description + * Get the BPF program's return value that will be returned to the upper layers. + * + * This helper is currently supported by cgroup programs and only by the hooks + * where BPF program's return value is returned to the userspace via errno. + * Return + * The BPF program's return value. + * + * int bpf_set_retval(int retval) + * Description + * Set the BPF program's return value that will be returned to the upper layers. + * + * This helper is currently supported by cgroup programs and only by the hooks + * where BPF program's return value is returned to the userspace via errno. + * + * Note that there is the following corner case where the program exports an error + * via bpf_set_retval but signals success via 'return 1': + * + * bpf_set_retval(-EPERM); + * return 1; + * + * In this case, the BPF program's return value will use helper's -EPERM. This + * still holds true for cgroup/bind{4,6} which supports extra 'return 3' success case. + * + * Return + * 0 on success, or a negative error in case of failure. + * + * u64 bpf_xdp_get_buff_len(struct xdp_buff *xdp_md) + * Description + * Get the total size of a given xdp buff (linear and paged area) + * Return + * The total size of a given xdp buffer. + * + * long bpf_xdp_load_bytes(struct xdp_buff *xdp_md, u32 offset, void *buf, u32 len) + * Description + * This helper is provided as an easy way to load data from a + * xdp buffer. It can be used to load *len* bytes from *offset* from + * the frame associated to *xdp_md*, into the buffer pointed by + * *buf*. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_xdp_store_bytes(struct xdp_buff *xdp_md, u32 offset, void *buf, u32 len) + * Description + * Store *len* bytes from buffer *buf* into the frame + * associated to *xdp_md*, at *offset*. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_copy_from_user_task(void *dst, u32 size, const void *user_ptr, struct task_struct *tsk, u64 flags) + * Description + * Read *size* bytes from user space address *user_ptr* in *tsk*'s + * address space, and stores the data in *dst*. *flags* is not + * used yet and is provided for future extensibility. This helper + * can only be used by sleepable programs. + * Return + * 0 on success, or a negative error in case of failure. On error + * *dst* buffer is zeroed out. + * + * long bpf_skb_set_tstamp(struct sk_buff *skb, u64 tstamp, u32 tstamp_type) + * Description + * Change the __sk_buff->tstamp_type to *tstamp_type* + * and set *tstamp* to the __sk_buff->tstamp together. + * + * If there is no need to change the __sk_buff->tstamp_type, + * the tstamp value can be directly written to __sk_buff->tstamp + * instead. + * + * BPF_SKB_TSTAMP_DELIVERY_MONO is the only tstamp that + * will be kept during bpf_redirect_*(). A non zero + * *tstamp* must be used with the BPF_SKB_TSTAMP_DELIVERY_MONO + * *tstamp_type*. + * + * A BPF_SKB_TSTAMP_UNSPEC *tstamp_type* can only be used + * with a zero *tstamp*. + * + * Only IPv4 and IPv6 skb->protocol are supported. + * + * This function is most useful when it needs to set a + * mono delivery time to __sk_buff->tstamp and then + * bpf_redirect_*() to the egress of an iface. For example, + * changing the (rcv) timestamp in __sk_buff->tstamp at + * ingress to a mono delivery time and then bpf_redirect_*() + * to sch_fq@phy-dev. + * Return + * 0 on success. + * **-EINVAL** for invalid input + * **-EOPNOTSUPP** for unsupported protocol + * + * long bpf_ima_file_hash(struct file *file, void *dst, u32 size) + * Description + * Returns a calculated IMA hash of the *file*. + * If the hash is larger than *size*, then only *size* + * bytes will be copied to *dst* + * Return + * The **hash_algo** is returned on success, + * **-EOPNOTSUP** if the hash calculation failed or **-EINVAL** if + * invalid arguments are passed. + * + * void *bpf_kptr_xchg(void *map_value, void *ptr) + * Description + * Exchange kptr at pointer *map_value* with *ptr*, and return the + * old value. *ptr* can be NULL, otherwise it must be a referenced + * pointer which will be released when this helper is called. + * Return + * The old value of kptr (which can be NULL). The returned pointer + * if not NULL, is a reference which must be released using its + * corresponding release function, or moved into a BPF map before + * program exit. + * + * void *bpf_map_lookup_percpu_elem(struct bpf_map *map, const void *key, u32 cpu) + * Description + * Perform a lookup in *percpu map* for an entry associated to + * *key* on *cpu*. + * Return + * Map value associated to *key* on *cpu*, or **NULL** if no entry + * was found or *cpu* is invalid. + * + * struct mptcp_sock *bpf_skc_to_mptcp_sock(void *sk) + * Description + * Dynamically cast a *sk* pointer to a *mptcp_sock* pointer. + * Return + * *sk* if casting is valid, or **NULL** otherwise. + * + * long bpf_dynptr_from_mem(void *data, u32 size, u64 flags, struct bpf_dynptr *ptr) + * Description + * Get a dynptr to local memory *data*. + * + * *data* must be a ptr to a map value. + * The maximum *size* supported is DYNPTR_MAX_SIZE. + * *flags* is currently unused. + * Return + * 0 on success, -E2BIG if the size exceeds DYNPTR_MAX_SIZE, + * -EINVAL if flags is not 0. + * + * long bpf_ringbuf_reserve_dynptr(void *ringbuf, u32 size, u64 flags, struct bpf_dynptr *ptr) + * Description + * Reserve *size* bytes of payload in a ring buffer *ringbuf* + * through the dynptr interface. *flags* must be 0. + * + * Please note that a corresponding bpf_ringbuf_submit_dynptr or + * bpf_ringbuf_discard_dynptr must be called on *ptr*, even if the + * reservation fails. This is enforced by the verifier. + * Return + * 0 on success, or a negative error in case of failure. + * + * void bpf_ringbuf_submit_dynptr(struct bpf_dynptr *ptr, u64 flags) + * Description + * Submit reserved ring buffer sample, pointed to by *data*, + * through the dynptr interface. This is a no-op if the dynptr is + * invalid/null. + * + * For more information on *flags*, please see + * 'bpf_ringbuf_submit'. + * Return + * Nothing. Always succeeds. + * + * void bpf_ringbuf_discard_dynptr(struct bpf_dynptr *ptr, u64 flags) + * Description + * Discard reserved ring buffer sample through the dynptr + * interface. This is a no-op if the dynptr is invalid/null. + * + * For more information on *flags*, please see + * 'bpf_ringbuf_discard'. + * Return + * Nothing. Always succeeds. + * + * long bpf_dynptr_read(void *dst, u32 len, const struct bpf_dynptr *src, u32 offset, u64 flags) + * Description + * Read *len* bytes from *src* into *dst*, starting from *offset* + * into *src*. + * *flags* is currently unused. + * Return + * 0 on success, -E2BIG if *offset* + *len* exceeds the length + * of *src*'s data, -EINVAL if *src* is an invalid dynptr or if + * *flags* is not 0. + * + * long bpf_dynptr_write(const struct bpf_dynptr *dst, u32 offset, void *src, u32 len, u64 flags) + * Description + * Write *len* bytes from *src* into *dst*, starting from *offset* + * into *dst*. + * + * *flags* must be 0 except for skb-type dynptrs. + * + * For skb-type dynptrs: + * * All data slices of the dynptr are automatically + * invalidated after **bpf_dynptr_write**\ (). This is + * because writing may pull the skb and change the + * underlying packet buffer. + * + * * For *flags*, please see the flags accepted by + * **bpf_skb_store_bytes**\ (). + * Return + * 0 on success, -E2BIG if *offset* + *len* exceeds the length + * of *dst*'s data, -EINVAL if *dst* is an invalid dynptr or if *dst* + * is a read-only dynptr or if *flags* is not correct. For skb-type dynptrs, + * other errors correspond to errors returned by **bpf_skb_store_bytes**\ (). + * + * void *bpf_dynptr_data(const struct bpf_dynptr *ptr, u32 offset, u32 len) + * Description + * Get a pointer to the underlying dynptr data. + * + * *len* must be a statically known value. The returned data slice + * is invalidated whenever the dynptr is invalidated. + * + * skb and xdp type dynptrs may not use bpf_dynptr_data. They should + * instead use bpf_dynptr_slice and bpf_dynptr_slice_rdwr. + * Return + * Pointer to the underlying dynptr data, NULL if the dynptr is + * read-only, if the dynptr is invalid, or if the offset and length + * is out of bounds. + * + * s64 bpf_tcp_raw_gen_syncookie_ipv4(struct iphdr *iph, struct tcphdr *th, u32 th_len) + * Description + * Try to issue a SYN cookie for the packet with corresponding + * IPv4/TCP headers, *iph* and *th*, without depending on a + * listening socket. + * + * *iph* points to the IPv4 header. + * + * *th* points to the start of the TCP header, while *th_len* + * contains the length of the TCP header (at least + * **sizeof**\ (**struct tcphdr**)). + * Return + * On success, lower 32 bits hold the generated SYN cookie in + * followed by 16 bits which hold the MSS value for that cookie, + * and the top 16 bits are unused. + * + * On failure, the returned value is one of the following: + * + * **-EINVAL** if *th_len* is invalid. + * + * s64 bpf_tcp_raw_gen_syncookie_ipv6(struct ipv6hdr *iph, struct tcphdr *th, u32 th_len) + * Description + * Try to issue a SYN cookie for the packet with corresponding + * IPv6/TCP headers, *iph* and *th*, without depending on a + * listening socket. + * + * *iph* points to the IPv6 header. + * + * *th* points to the start of the TCP header, while *th_len* + * contains the length of the TCP header (at least + * **sizeof**\ (**struct tcphdr**)). + * Return + * On success, lower 32 bits hold the generated SYN cookie in + * followed by 16 bits which hold the MSS value for that cookie, + * and the top 16 bits are unused. + * + * On failure, the returned value is one of the following: + * + * **-EINVAL** if *th_len* is invalid. + * + * **-EPROTONOSUPPORT** if CONFIG_IPV6 is not builtin. + * + * long bpf_tcp_raw_check_syncookie_ipv4(struct iphdr *iph, struct tcphdr *th) + * Description + * Check whether *iph* and *th* contain a valid SYN cookie ACK + * without depending on a listening socket. + * + * *iph* points to the IPv4 header. + * + * *th* points to the TCP header. + * Return + * 0 if *iph* and *th* are a valid SYN cookie ACK. + * + * On failure, the returned value is one of the following: + * + * **-EACCES** if the SYN cookie is not valid. + * + * long bpf_tcp_raw_check_syncookie_ipv6(struct ipv6hdr *iph, struct tcphdr *th) + * Description + * Check whether *iph* and *th* contain a valid SYN cookie ACK + * without depending on a listening socket. + * + * *iph* points to the IPv6 header. + * + * *th* points to the TCP header. + * Return + * 0 if *iph* and *th* are a valid SYN cookie ACK. + * + * On failure, the returned value is one of the following: + * + * **-EACCES** if the SYN cookie is not valid. * - * **-EPERM** if the helper cannot be used under the current - * *skops*\ **->op**. + * **-EPROTONOSUPPORT** if CONFIG_IPV6 is not builtin. * - * long bpf_reserve_hdr_opt(struct bpf_sock_ops *skops, u32 len, u64 flags) + * u64 bpf_ktime_get_tai_ns(void) * Description - * Reserve *len* bytes for the bpf header option. The - * space will be used by **bpf_store_hdr_opt**\ () later in - * **BPF_SOCK_OPS_WRITE_HDR_OPT_CB**. + * A nonsettable system-wide clock derived from wall-clock time but + * ignoring leap seconds. This clock does not experience + * discontinuities and backwards jumps caused by NTP inserting leap + * seconds as CLOCK_REALTIME does. * - * If **bpf_reserve_hdr_opt**\ () is called multiple times, - * the total number of bytes will be reserved. + * See: **clock_gettime**\ (**CLOCK_TAI**) + * Return + * Current *ktime*. * - * This helper can only be called during - * **BPF_SOCK_OPS_HDR_OPT_LEN_CB**. + * long bpf_user_ringbuf_drain(struct bpf_map *map, void *callback_fn, void *ctx, u64 flags) + * Description + * Drain samples from the specified user ring buffer, and invoke + * the provided callback for each such sample: * + * long (\*callback_fn)(const struct bpf_dynptr \*dynptr, void \*ctx); + * + * If **callback_fn** returns 0, the helper will continue to try + * and drain the next sample, up to a maximum of + * BPF_MAX_USER_RINGBUF_SAMPLES samples. If the return value is 1, + * the helper will skip the rest of the samples and return. Other + * return values are not used now, and will be rejected by the + * verifier. * Return - * 0 on success, or negative error in case of failure: + * The number of drained samples if no error was encountered while + * draining samples, or 0 if no samples were present in the ring + * buffer. If a user-space producer was epoll-waiting on this map, + * and at least one sample was drained, they will receive an event + * notification notifying them of available space in the ring + * buffer. If the BPF_RB_NO_WAKEUP flag is passed to this + * function, no wakeup notification will be sent. If the + * BPF_RB_FORCE_WAKEUP flag is passed, a wakeup notification will + * be sent even if no sample was drained. * - * **-EINVAL** if a parameter is invalid. + * On failure, the returned value is one of the following: * - * **-ENOSPC** if there is not enough space in the header. + * **-EBUSY** if the ring buffer is contended, and another calling + * context was concurrently draining the ring buffer. * - * **-EPERM** if the helper cannot be used under the current - * *skops*\ **->op**. + * **-EINVAL** if user-space is not properly tracking the ring + * buffer due to the producer position not being aligned to 8 + * bytes, a sample not being aligned to 8 bytes, or the producer + * position not matching the advertised length of a sample. * - * void *bpf_inode_storage_get(struct bpf_map *map, void *inode, void *value, u64 flags) + * **-E2BIG** if user-space has tried to publish a sample which is + * larger than the size of the ring buffer, or which cannot fit + * within a struct bpf_dynptr. + * + * void *bpf_cgrp_storage_get(struct bpf_map *map, struct cgroup *cgroup, void *value, u64 flags) * Description - * Get a bpf_local_storage from an *inode*. + * Get a bpf_local_storage from the *cgroup*. * * Logically, it could be thought of as getting the value from - * a *map* with *inode* as the **key**. From this + * a *map* with *cgroup* as the **key**. From this * perspective, the usage is not much different from - * **bpf_map_lookup_elem**\ (*map*, **&**\ *inode*) except this - * helper enforces the key must be an inode and the map must also - * be a **BPF_MAP_TYPE_INODE_STORAGE**. + * **bpf_map_lookup_elem**\ (*map*, **&**\ *cgroup*) except this + * helper enforces the key must be a cgroup struct and the map must also + * be a **BPF_MAP_TYPE_CGRP_STORAGE**. * - * Underneath, the value is stored locally at *inode* instead of - * the *map*. The *map* is used as the bpf-local-storage - * "type". The bpf-local-storage "type" (i.e. the *map*) is - * searched against all bpf_local_storage residing at *inode*. + * In reality, the local-storage value is embedded directly inside of the + * *cgroup* object itself, rather than being located in the + * **BPF_MAP_TYPE_CGRP_STORAGE** map. When the local-storage value is + * queried for some *map* on a *cgroup* object, the kernel will perform an + * O(n) iteration over all of the live local-storage values for that + * *cgroup* object until the local-storage value for the *map* is found. * * An optional *flags* (**BPF_LOCAL_STORAGE_GET_F_CREATE**) can be * used such that a new bpf_local_storage will be @@ -3597,317 +5635,241 @@ union bpf_attr { * **NULL** if not found or there was an error in adding * a new bpf_local_storage. * - * int bpf_inode_storage_delete(struct bpf_map *map, void *inode) + * long bpf_cgrp_storage_delete(struct bpf_map *map, struct cgroup *cgroup) * Description - * Delete a bpf_local_storage from an *inode*. + * Delete a bpf_local_storage from a *cgroup*. * Return * 0 on success. * * **-ENOENT** if the bpf_local_storage cannot be found. - * - * long bpf_d_path(struct path *path, char *buf, u32 sz) - * Description - * Return full path for given **struct path** object, which - * needs to be the kernel BTF *path* object. The path is - * returned in the provided buffer *buf* of size *sz* and - * is zero terminated. - * - * Return - * On success, the strictly positive length of the string, - * including the trailing NUL character. On error, a negative - * value. - * - * long bpf_copy_from_user(void *dst, u32 size, const void *user_ptr) - * Description - * Read *size* bytes from user space address *user_ptr* and store - * the data in *dst*. This is a wrapper of **copy_from_user**\ (). - * Return - * 0 on success, or a negative error in case of failure. - * - * long bpf_snprintf_btf(char *str, u32 str_size, struct btf_ptr *ptr, u32 btf_ptr_size, u64 flags) - * Description - * Use BTF to store a string representation of *ptr*->ptr in *str*, - * using *ptr*->type_id. This value should specify the type - * that *ptr*->ptr points to. LLVM __builtin_btf_type_id(type, 1) - * can be used to look up vmlinux BTF type ids. Traversing the - * data structure using BTF, the type information and values are - * stored in the first *str_size* - 1 bytes of *str*. Safe copy of - * the pointer data is carried out to avoid kernel crashes during - * operation. Smaller types can use string space on the stack; - * larger programs can use map data to store the string - * representation. - * - * The string can be subsequently shared with userspace via - * bpf_perf_event_output() or ring buffer interfaces. - * bpf_trace_printk() is to be avoided as it places too small - * a limit on string size to be useful. - * - * *flags* is a combination of - * - * **BTF_F_COMPACT** - * no formatting around type information - * **BTF_F_NONAME** - * no struct/union member names/types - * **BTF_F_PTR_RAW** - * show raw (unobfuscated) pointer values; - * equivalent to printk specifier %px. - * **BTF_F_ZERO** - * show zero-valued struct/union members; they - * are not displayed by default - * - * Return - * The number of bytes that were written (or would have been - * written if output had to be truncated due to string size), - * or a negative error in cases of failure. - * - * long bpf_seq_printf_btf(struct seq_file *m, struct btf_ptr *ptr, u32 ptr_size, u64 flags) - * Description - * Use BTF to write to seq_write a string representation of - * *ptr*->ptr, using *ptr*->type_id as per bpf_snprintf_btf(). - * *flags* are identical to those used for bpf_snprintf_btf. - * Return - * 0 on success or a negative error in case of failure. - * - * u64 bpf_skb_cgroup_classid(struct sk_buff *skb) - * Description - * See **bpf_get_cgroup_classid**\ () for the main description. - * This helper differs from **bpf_get_cgroup_classid**\ () in that - * the cgroup v1 net_cls class is retrieved only from the *skb*'s - * associated socket instead of the current process. - * Return - * The id is returned or 0 in case the id could not be retrieved. - * - * long bpf_redirect_neigh(u32 ifindex, struct bpf_redir_neigh *params, int plen, u64 flags) - * Description - * Redirect the packet to another net device of index *ifindex* - * and fill in L2 addresses from neighboring subsystem. This helper - * is somewhat similar to **bpf_redirect**\ (), except that it - * populates L2 addresses as well, meaning, internally, the helper - * relies on the neighbor lookup for the L2 address of the nexthop. - * - * The helper will perform a FIB lookup based on the skb's - * networking header to get the address of the next hop, unless - * this is supplied by the caller in the *params* argument. The - * *plen* argument indicates the len of *params* and should be set - * to 0 if *params* is NULL. - * - * The *flags* argument is reserved and must be 0. The helper is - * currently only supported for tc BPF program types, and enabled - * for IPv4 and IPv6 protocols. - * Return - * The helper returns **TC_ACT_REDIRECT** on success or - * **TC_ACT_SHOT** on error. - * - * void *bpf_per_cpu_ptr(const void *percpu_ptr, u32 cpu) - * Description - * Take a pointer to a percpu ksym, *percpu_ptr*, and return a - * pointer to the percpu kernel variable on *cpu*. A ksym is an - * extern variable decorated with '__ksym'. For ksym, there is a - * global var (either static or global) defined of the same name - * in the kernel. The ksym is percpu if the global var is percpu. - * The returned pointer points to the global percpu var on *cpu*. - * - * bpf_per_cpu_ptr() has the same semantic as per_cpu_ptr() in the - * kernel, except that bpf_per_cpu_ptr() may return NULL. This - * happens if *cpu* is larger than nr_cpu_ids. The caller of - * bpf_per_cpu_ptr() must check the returned value. - * Return - * A pointer pointing to the kernel percpu variable on *cpu*, or - * NULL, if *cpu* is invalid. - * - * void *bpf_this_cpu_ptr(const void *percpu_ptr) - * Description - * Take a pointer to a percpu ksym, *percpu_ptr*, and return a - * pointer to the percpu kernel variable on this cpu. See the - * description of 'ksym' in **bpf_per_cpu_ptr**\ (). - * - * bpf_this_cpu_ptr() has the same semantic as this_cpu_ptr() in - * the kernel. Different from **bpf_per_cpu_ptr**\ (), it would - * never return NULL. - * Return - * A pointer pointing to the kernel percpu variable on this cpu. - * - * long bpf_redirect_peer(u32 ifindex, u64 flags) - * Description - * Redirect the packet to another net device of index *ifindex*. - * This helper is somewhat similar to **bpf_redirect**\ (), except - * that the redirection happens to the *ifindex*' peer device and - * the netns switch takes place from ingress to ingress without - * going through the CPU's backlog queue. - * - * The *flags* argument is reserved and must be 0. The helper is - * currently only supported for tc BPF program types at the ingress - * hook and for veth device types. The peer device must reside in a - * different network namespace. - * Return - * The helper returns **TC_ACT_REDIRECT** on success or - * **TC_ACT_SHOT** on error. */ -#define __BPF_FUNC_MAPPER(FN) \ - FN(unspec), \ - FN(map_lookup_elem), \ - FN(map_update_elem), \ - FN(map_delete_elem), \ - FN(probe_read), \ - FN(ktime_get_ns), \ - FN(trace_printk), \ - FN(get_prandom_u32), \ - FN(get_smp_processor_id), \ - FN(skb_store_bytes), \ - FN(l3_csum_replace), \ - FN(l4_csum_replace), \ - FN(tail_call), \ - FN(clone_redirect), \ - FN(get_current_pid_tgid), \ - FN(get_current_uid_gid), \ - FN(get_current_comm), \ - FN(get_cgroup_classid), \ - FN(skb_vlan_push), \ - FN(skb_vlan_pop), \ - FN(skb_get_tunnel_key), \ - FN(skb_set_tunnel_key), \ - FN(perf_event_read), \ - FN(redirect), \ - FN(get_route_realm), \ - FN(perf_event_output), \ - FN(skb_load_bytes), \ - FN(get_stackid), \ - FN(csum_diff), \ - FN(skb_get_tunnel_opt), \ - FN(skb_set_tunnel_opt), \ - FN(skb_change_proto), \ - FN(skb_change_type), \ - FN(skb_under_cgroup), \ - FN(get_hash_recalc), \ - FN(get_current_task), \ - FN(probe_write_user), \ - FN(current_task_under_cgroup), \ - FN(skb_change_tail), \ - FN(skb_pull_data), \ - FN(csum_update), \ - FN(set_hash_invalid), \ - FN(get_numa_node_id), \ - FN(skb_change_head), \ - FN(xdp_adjust_head), \ - FN(probe_read_str), \ - FN(get_socket_cookie), \ - FN(get_socket_uid), \ - FN(set_hash), \ - FN(setsockopt), \ - FN(skb_adjust_room), \ - FN(redirect_map), \ - FN(sk_redirect_map), \ - FN(sock_map_update), \ - FN(xdp_adjust_meta), \ - FN(perf_event_read_value), \ - FN(perf_prog_read_value), \ - FN(getsockopt), \ - FN(override_return), \ - FN(sock_ops_cb_flags_set), \ - FN(msg_redirect_map), \ - FN(msg_apply_bytes), \ - FN(msg_cork_bytes), \ - FN(msg_pull_data), \ - FN(bind), \ - FN(xdp_adjust_tail), \ - FN(skb_get_xfrm_state), \ - FN(get_stack), \ - FN(skb_load_bytes_relative), \ - FN(fib_lookup), \ - FN(sock_hash_update), \ - FN(msg_redirect_hash), \ - FN(sk_redirect_hash), \ - FN(lwt_push_encap), \ - FN(lwt_seg6_store_bytes), \ - FN(lwt_seg6_adjust_srh), \ - FN(lwt_seg6_action), \ - FN(rc_repeat), \ - FN(rc_keydown), \ - FN(skb_cgroup_id), \ - FN(get_current_cgroup_id), \ - FN(get_local_storage), \ - FN(sk_select_reuseport), \ - FN(skb_ancestor_cgroup_id), \ - FN(sk_lookup_tcp), \ - FN(sk_lookup_udp), \ - FN(sk_release), \ - FN(map_push_elem), \ - FN(map_pop_elem), \ - FN(map_peek_elem), \ - FN(msg_push_data), \ - FN(msg_pop_data), \ - FN(rc_pointer_rel), \ - FN(spin_lock), \ - FN(spin_unlock), \ - FN(sk_fullsock), \ - FN(tcp_sock), \ - FN(skb_ecn_set_ce), \ - FN(get_listener_sock), \ - FN(skc_lookup_tcp), \ - FN(tcp_check_syncookie), \ - FN(sysctl_get_name), \ - FN(sysctl_get_current_value), \ - FN(sysctl_get_new_value), \ - FN(sysctl_set_new_value), \ - FN(strtol), \ - FN(strtoul), \ - FN(sk_storage_get), \ - FN(sk_storage_delete), \ - FN(send_signal), \ - FN(tcp_gen_syncookie), \ - FN(skb_output), \ - FN(probe_read_user), \ - FN(probe_read_kernel), \ - FN(probe_read_user_str), \ - FN(probe_read_kernel_str), \ - FN(tcp_send_ack), \ - FN(send_signal_thread), \ - FN(jiffies64), \ - FN(read_branch_records), \ - FN(get_ns_current_pid_tgid), \ - FN(xdp_output), \ - FN(get_netns_cookie), \ - FN(get_current_ancestor_cgroup_id), \ - FN(sk_assign), \ - FN(ktime_get_boot_ns), \ - FN(seq_printf), \ - FN(seq_write), \ - FN(sk_cgroup_id), \ - FN(sk_ancestor_cgroup_id), \ - FN(ringbuf_output), \ - FN(ringbuf_reserve), \ - FN(ringbuf_submit), \ - FN(ringbuf_discard), \ - FN(ringbuf_query), \ - FN(csum_level), \ - FN(skc_to_tcp6_sock), \ - FN(skc_to_tcp_sock), \ - FN(skc_to_tcp_timewait_sock), \ - FN(skc_to_tcp_request_sock), \ - FN(skc_to_udp6_sock), \ - FN(get_task_stack), \ - FN(load_hdr_opt), \ - FN(store_hdr_opt), \ - FN(reserve_hdr_opt), \ - FN(inode_storage_get), \ - FN(inode_storage_delete), \ - FN(d_path), \ - FN(copy_from_user), \ - FN(snprintf_btf), \ - FN(seq_printf_btf), \ - FN(skb_cgroup_classid), \ - FN(redirect_neigh), \ - FN(per_cpu_ptr), \ - FN(this_cpu_ptr), \ - FN(redirect_peer), \ +#define ___BPF_FUNC_MAPPER(FN, ctx...) \ + FN(unspec, 0, ##ctx) \ + FN(map_lookup_elem, 1, ##ctx) \ + FN(map_update_elem, 2, ##ctx) \ + FN(map_delete_elem, 3, ##ctx) \ + FN(probe_read, 4, ##ctx) \ + FN(ktime_get_ns, 5, ##ctx) \ + FN(trace_printk, 6, ##ctx) \ + FN(get_prandom_u32, 7, ##ctx) \ + FN(get_smp_processor_id, 8, ##ctx) \ + FN(skb_store_bytes, 9, ##ctx) \ + FN(l3_csum_replace, 10, ##ctx) \ + FN(l4_csum_replace, 11, ##ctx) \ + FN(tail_call, 12, ##ctx) \ + FN(clone_redirect, 13, ##ctx) \ + FN(get_current_pid_tgid, 14, ##ctx) \ + FN(get_current_uid_gid, 15, ##ctx) \ + FN(get_current_comm, 16, ##ctx) \ + FN(get_cgroup_classid, 17, ##ctx) \ + FN(skb_vlan_push, 18, ##ctx) \ + FN(skb_vlan_pop, 19, ##ctx) \ + FN(skb_get_tunnel_key, 20, ##ctx) \ + FN(skb_set_tunnel_key, 21, ##ctx) \ + FN(perf_event_read, 22, ##ctx) \ + FN(redirect, 23, ##ctx) \ + FN(get_route_realm, 24, ##ctx) \ + FN(perf_event_output, 25, ##ctx) \ + FN(skb_load_bytes, 26, ##ctx) \ + FN(get_stackid, 27, ##ctx) \ + FN(csum_diff, 28, ##ctx) \ + FN(skb_get_tunnel_opt, 29, ##ctx) \ + FN(skb_set_tunnel_opt, 30, ##ctx) \ + FN(skb_change_proto, 31, ##ctx) \ + FN(skb_change_type, 32, ##ctx) \ + FN(skb_under_cgroup, 33, ##ctx) \ + FN(get_hash_recalc, 34, ##ctx) \ + FN(get_current_task, 35, ##ctx) \ + FN(probe_write_user, 36, ##ctx) \ + FN(current_task_under_cgroup, 37, ##ctx) \ + FN(skb_change_tail, 38, ##ctx) \ + FN(skb_pull_data, 39, ##ctx) \ + FN(csum_update, 40, ##ctx) \ + FN(set_hash_invalid, 41, ##ctx) \ + FN(get_numa_node_id, 42, ##ctx) \ + FN(skb_change_head, 43, ##ctx) \ + FN(xdp_adjust_head, 44, ##ctx) \ + FN(probe_read_str, 45, ##ctx) \ + FN(get_socket_cookie, 46, ##ctx) \ + FN(get_socket_uid, 47, ##ctx) \ + FN(set_hash, 48, ##ctx) \ + FN(setsockopt, 49, ##ctx) \ + FN(skb_adjust_room, 50, ##ctx) \ + FN(redirect_map, 51, ##ctx) \ + FN(sk_redirect_map, 52, ##ctx) \ + FN(sock_map_update, 53, ##ctx) \ + FN(xdp_adjust_meta, 54, ##ctx) \ + FN(perf_event_read_value, 55, ##ctx) \ + FN(perf_prog_read_value, 56, ##ctx) \ + FN(getsockopt, 57, ##ctx) \ + FN(override_return, 58, ##ctx) \ + FN(sock_ops_cb_flags_set, 59, ##ctx) \ + FN(msg_redirect_map, 60, ##ctx) \ + FN(msg_apply_bytes, 61, ##ctx) \ + FN(msg_cork_bytes, 62, ##ctx) \ + FN(msg_pull_data, 63, ##ctx) \ + FN(bind, 64, ##ctx) \ + FN(xdp_adjust_tail, 65, ##ctx) \ + FN(skb_get_xfrm_state, 66, ##ctx) \ + FN(get_stack, 67, ##ctx) \ + FN(skb_load_bytes_relative, 68, ##ctx) \ + FN(fib_lookup, 69, ##ctx) \ + FN(sock_hash_update, 70, ##ctx) \ + FN(msg_redirect_hash, 71, ##ctx) \ + FN(sk_redirect_hash, 72, ##ctx) \ + FN(lwt_push_encap, 73, ##ctx) \ + FN(lwt_seg6_store_bytes, 74, ##ctx) \ + FN(lwt_seg6_adjust_srh, 75, ##ctx) \ + FN(lwt_seg6_action, 76, ##ctx) \ + FN(rc_repeat, 77, ##ctx) \ + FN(rc_keydown, 78, ##ctx) \ + FN(skb_cgroup_id, 79, ##ctx) \ + FN(get_current_cgroup_id, 80, ##ctx) \ + FN(get_local_storage, 81, ##ctx) \ + FN(sk_select_reuseport, 82, ##ctx) \ + FN(skb_ancestor_cgroup_id, 83, ##ctx) \ + FN(sk_lookup_tcp, 84, ##ctx) \ + FN(sk_lookup_udp, 85, ##ctx) \ + FN(sk_release, 86, ##ctx) \ + FN(map_push_elem, 87, ##ctx) \ + FN(map_pop_elem, 88, ##ctx) \ + FN(map_peek_elem, 89, ##ctx) \ + FN(msg_push_data, 90, ##ctx) \ + FN(msg_pop_data, 91, ##ctx) \ + FN(rc_pointer_rel, 92, ##ctx) \ + FN(spin_lock, 93, ##ctx) \ + FN(spin_unlock, 94, ##ctx) \ + FN(sk_fullsock, 95, ##ctx) \ + FN(tcp_sock, 96, ##ctx) \ + FN(skb_ecn_set_ce, 97, ##ctx) \ + FN(get_listener_sock, 98, ##ctx) \ + FN(skc_lookup_tcp, 99, ##ctx) \ + FN(tcp_check_syncookie, 100, ##ctx) \ + FN(sysctl_get_name, 101, ##ctx) \ + FN(sysctl_get_current_value, 102, ##ctx) \ + FN(sysctl_get_new_value, 103, ##ctx) \ + FN(sysctl_set_new_value, 104, ##ctx) \ + FN(strtol, 105, ##ctx) \ + FN(strtoul, 106, ##ctx) \ + FN(sk_storage_get, 107, ##ctx) \ + FN(sk_storage_delete, 108, ##ctx) \ + FN(send_signal, 109, ##ctx) \ + FN(tcp_gen_syncookie, 110, ##ctx) \ + FN(skb_output, 111, ##ctx) \ + FN(probe_read_user, 112, ##ctx) \ + FN(probe_read_kernel, 113, ##ctx) \ + FN(probe_read_user_str, 114, ##ctx) \ + FN(probe_read_kernel_str, 115, ##ctx) \ + FN(tcp_send_ack, 116, ##ctx) \ + FN(send_signal_thread, 117, ##ctx) \ + FN(jiffies64, 118, ##ctx) \ + FN(read_branch_records, 119, ##ctx) \ + FN(get_ns_current_pid_tgid, 120, ##ctx) \ + FN(xdp_output, 121, ##ctx) \ + FN(get_netns_cookie, 122, ##ctx) \ + FN(get_current_ancestor_cgroup_id, 123, ##ctx) \ + FN(sk_assign, 124, ##ctx) \ + FN(ktime_get_boot_ns, 125, ##ctx) \ + FN(seq_printf, 126, ##ctx) \ + FN(seq_write, 127, ##ctx) \ + FN(sk_cgroup_id, 128, ##ctx) \ + FN(sk_ancestor_cgroup_id, 129, ##ctx) \ + FN(ringbuf_output, 130, ##ctx) \ + FN(ringbuf_reserve, 131, ##ctx) \ + FN(ringbuf_submit, 132, ##ctx) \ + FN(ringbuf_discard, 133, ##ctx) \ + FN(ringbuf_query, 134, ##ctx) \ + FN(csum_level, 135, ##ctx) \ + FN(skc_to_tcp6_sock, 136, ##ctx) \ + FN(skc_to_tcp_sock, 137, ##ctx) \ + FN(skc_to_tcp_timewait_sock, 138, ##ctx) \ + FN(skc_to_tcp_request_sock, 139, ##ctx) \ + FN(skc_to_udp6_sock, 140, ##ctx) \ + FN(get_task_stack, 141, ##ctx) \ + FN(load_hdr_opt, 142, ##ctx) \ + FN(store_hdr_opt, 143, ##ctx) \ + FN(reserve_hdr_opt, 144, ##ctx) \ + FN(inode_storage_get, 145, ##ctx) \ + FN(inode_storage_delete, 146, ##ctx) \ + FN(d_path, 147, ##ctx) \ + FN(copy_from_user, 148, ##ctx) \ + FN(snprintf_btf, 149, ##ctx) \ + FN(seq_printf_btf, 150, ##ctx) \ + FN(skb_cgroup_classid, 151, ##ctx) \ + FN(redirect_neigh, 152, ##ctx) \ + FN(per_cpu_ptr, 153, ##ctx) \ + FN(this_cpu_ptr, 154, ##ctx) \ + FN(redirect_peer, 155, ##ctx) \ + FN(task_storage_get, 156, ##ctx) \ + FN(task_storage_delete, 157, ##ctx) \ + FN(get_current_task_btf, 158, ##ctx) \ + FN(bprm_opts_set, 159, ##ctx) \ + FN(ktime_get_coarse_ns, 160, ##ctx) \ + FN(ima_inode_hash, 161, ##ctx) \ + FN(sock_from_file, 162, ##ctx) \ + FN(check_mtu, 163, ##ctx) \ + FN(for_each_map_elem, 164, ##ctx) \ + FN(snprintf, 165, ##ctx) \ + FN(sys_bpf, 166, ##ctx) \ + FN(btf_find_by_name_kind, 167, ##ctx) \ + FN(sys_close, 168, ##ctx) \ + FN(timer_init, 169, ##ctx) \ + FN(timer_set_callback, 170, ##ctx) \ + FN(timer_start, 171, ##ctx) \ + FN(timer_cancel, 172, ##ctx) \ + FN(get_func_ip, 173, ##ctx) \ + FN(get_attach_cookie, 174, ##ctx) \ + FN(task_pt_regs, 175, ##ctx) \ + FN(get_branch_snapshot, 176, ##ctx) \ + FN(trace_vprintk, 177, ##ctx) \ + FN(skc_to_unix_sock, 178, ##ctx) \ + FN(kallsyms_lookup_name, 179, ##ctx) \ + FN(find_vma, 180, ##ctx) \ + FN(loop, 181, ##ctx) \ + FN(strncmp, 182, ##ctx) \ + FN(get_func_arg, 183, ##ctx) \ + FN(get_func_ret, 184, ##ctx) \ + FN(get_func_arg_cnt, 185, ##ctx) \ + FN(get_retval, 186, ##ctx) \ + FN(set_retval, 187, ##ctx) \ + FN(xdp_get_buff_len, 188, ##ctx) \ + FN(xdp_load_bytes, 189, ##ctx) \ + FN(xdp_store_bytes, 190, ##ctx) \ + FN(copy_from_user_task, 191, ##ctx) \ + FN(skb_set_tstamp, 192, ##ctx) \ + FN(ima_file_hash, 193, ##ctx) \ + FN(kptr_xchg, 194, ##ctx) \ + FN(map_lookup_percpu_elem, 195, ##ctx) \ + FN(skc_to_mptcp_sock, 196, ##ctx) \ + FN(dynptr_from_mem, 197, ##ctx) \ + FN(ringbuf_reserve_dynptr, 198, ##ctx) \ + FN(ringbuf_submit_dynptr, 199, ##ctx) \ + FN(ringbuf_discard_dynptr, 200, ##ctx) \ + FN(dynptr_read, 201, ##ctx) \ + FN(dynptr_write, 202, ##ctx) \ + FN(dynptr_data, 203, ##ctx) \ + FN(tcp_raw_gen_syncookie_ipv4, 204, ##ctx) \ + FN(tcp_raw_gen_syncookie_ipv6, 205, ##ctx) \ + FN(tcp_raw_check_syncookie_ipv4, 206, ##ctx) \ + FN(tcp_raw_check_syncookie_ipv6, 207, ##ctx) \ + FN(ktime_get_tai_ns, 208, ##ctx) \ + FN(user_ringbuf_drain, 209, ##ctx) \ + FN(cgrp_storage_get, 210, ##ctx) \ + FN(cgrp_storage_delete, 211, ##ctx) \ /* */ +/* backwards-compatibility macros for users of __BPF_FUNC_MAPPER that don't + * know or care about integer value that is now passed as second argument + */ +#define __BPF_FUNC_MAPPER_APPLY(name, value, FN) FN(name), +#define __BPF_FUNC_MAPPER(FN) ___BPF_FUNC_MAPPER(__BPF_FUNC_MAPPER_APPLY, FN) + /* integer value in 'imm' field of BPF_CALL instruction selects which helper * function eBPF program intends to call */ -#define __BPF_ENUM_FN(x) BPF_FUNC_ ## x +#define __BPF_ENUM_FN(x, y) BPF_FUNC_ ## x = y, enum bpf_func_id { - __BPF_FUNC_MAPPER(__BPF_ENUM_FN) + ___BPF_FUNC_MAPPER(__BPF_ENUM_FN) __BPF_FUNC_MAX_ID, }; #undef __BPF_ENUM_FN @@ -3960,6 +5922,12 @@ enum { BPF_F_ZERO_CSUM_TX = (1ULL << 1), BPF_F_DONT_FRAGMENT = (1ULL << 2), BPF_F_SEQ_NUMBER = (1ULL << 3), + BPF_F_NO_TUNNEL_KEY = (1ULL << 4), +}; + +/* BPF_FUNC_skb_get_tunnel_key flags. */ +enum { + BPF_F_TUNINFO_FLAGS = (1ULL << 4), }; /* BPF_FUNC_perf_event_output, BPF_FUNC_perf_event_read and @@ -3993,6 +5961,9 @@ enum { BPF_F_ADJ_ROOM_ENCAP_L4_GRE = (1ULL << 3), BPF_F_ADJ_ROOM_ENCAP_L4_UDP = (1ULL << 4), BPF_F_ADJ_ROOM_NO_CSUM_RESET = (1ULL << 5), + BPF_F_ADJ_ROOM_ENCAP_L2_ETH = (1ULL << 6), + BPF_F_ADJ_ROOM_DECAP_L3_IPV4 = (1ULL << 7), + BPF_F_ADJ_ROOM_DECAP_L3_IPV6 = (1ULL << 8), }; enum { @@ -4071,12 +6042,32 @@ enum bpf_lwt_encap_mode { BPF_LWT_ENCAP_IP, }; +/* Flags for bpf_bprm_opts_set helper */ +enum { + BPF_F_BPRM_SECUREEXEC = (1ULL << 0), +}; + +/* Flags for bpf_redirect_map helper */ +enum { + BPF_F_BROADCAST = (1ULL << 3), + BPF_F_EXCLUDE_INGRESS = (1ULL << 4), +}; + #define __bpf_md_ptr(type, name) \ union { \ type name; \ __u64 :64; \ } __attribute__((aligned(8))) +enum { + BPF_SKB_TSTAMP_UNSPEC, + BPF_SKB_TSTAMP_DELIVERY_MONO, /* tstamp has mono delivery time */ + /* For any BPF_SKB_TSTAMP_* that the bpf prog cannot handle, + * the bpf prog should handle it like BPF_SKB_TSTAMP_UNSPEC + * and try to deduce it by ingress, egress or skb->sk->sk_clockid. + */ +}; + /* user accessible mirror of in-kernel sk_buff. * new fields can only be added to the end of this structure */ @@ -4117,6 +6108,9 @@ struct __sk_buff { __u32 gso_segs; __bpf_md_ptr(struct bpf_sock *, sk); __u32 gso_size; + __u8 tstamp_type; + __u32 :24; /* Padding, future use. */ + __u64 hwtstamp; }; struct bpf_tunnel_key { @@ -4127,8 +6121,15 @@ struct bpf_tunnel_key { }; __u8 tunnel_tos; __u8 tunnel_ttl; - __u16 tunnel_ext; /* Padding, future use. */ + union { + __u16 tunnel_ext; /* compat */ + __be16 tunnel_flags; + }; __u32 tunnel_label; + union { + __u32 local_ipv4; + __u32 local_ipv6[4]; + }; }; /* user accessible mirror of in-kernel xfrm_state. @@ -4167,6 +6168,11 @@ enum bpf_ret_code { * represented by BPF_REDIRECT above). */ BPF_LWT_REROUTE = 128, + /* BPF_FLOW_DISSECTOR_CONTINUE: used by BPF_PROG_TYPE_FLOW_DISSECTOR + * to indicate that no custom dissection was performed, and + * fallback to standard dissector is requested. + */ + BPF_FLOW_DISSECTOR_CONTINUE = 129, }; struct bpf_sock { @@ -4180,7 +6186,8 @@ struct bpf_sock { __u32 src_ip4; __u32 src_ip6[4]; __u32 src_port; /* host byte order */ - __u32 dst_port; /* network byte order */ + __be16 dst_port; /* network byte order */ + __u16 :16; /* zero padding */ __u32 dst_ip4; __u32 dst_ip6[4]; __u32 state; @@ -4249,6 +6256,19 @@ struct bpf_sock_tuple { }; }; +/* (Simplified) user return codes for tcx prog type. + * A valid tcx program must return one of these defined values. All other + * return codes are reserved for future use. Must remain compatible with + * their TC_ACT_* counter-parts. For compatibility in behavior, unknown + * return codes are mapped to TCX_NEXT. + */ +enum tcx_action_base { + TCX_NEXT = -1, + TCX_PASS = 0, + TCX_DROP = 2, + TCX_REDIRECT = 7, +}; + struct bpf_xdp_sock { __u32 queue_id; }; @@ -4355,6 +6375,20 @@ struct sk_reuseport_md { __u32 ip_protocol; /* IP protocol. e.g. IPPROTO_TCP, IPPROTO_UDP */ __u32 bind_inany; /* Is sock bound to an INANY address? */ __u32 hash; /* A hash of the packet 4 tuples */ + /* When reuse->migrating_sk is NULL, it is selecting a sk for the + * new incoming connection request (e.g. selecting a listen sk for + * the received SYN in the TCP case). reuse->sk is one of the sk + * in the reuseport group. The bpf prog can use reuse->sk to learn + * the local listening ip/port without looking into the skb. + * + * When reuse->migrating_sk is not NULL, reuse->sk is closed and + * reuse->migrating_sk is the socket that needs to be migrated + * to another listening socket. migrating_sk could be a fullsock + * sk that is fully established or a reqsk that is in-the-middle + * of 3-way handshake. + */ + __bpf_md_ptr(struct bpf_sock *, sk); + __bpf_md_ptr(struct bpf_sock *, migrating_sk); }; #define BPF_TAG_SIZE 8 @@ -4395,6 +6429,10 @@ struct bpf_prog_info { __aligned_u64 prog_tags; __u64 run_time_ns; __u64 run_cnt; + __u64 recursion_misses; + __u32 verified_insns; + __u32 attach_btf_obj_id; + __u32 attach_btf_id; } __attribute__((aligned(8))); struct bpf_map_info { @@ -4412,12 +6450,17 @@ struct bpf_map_info { __u32 btf_id; __u32 btf_key_type_id; __u32 btf_value_type_id; + __u32 :32; /* alignment pad */ + __u64 map_extra; } __attribute__((aligned(8))); struct bpf_btf_info { __aligned_u64 btf; __u32 btf_size; __u32 id; + __aligned_u64 name; + __u32 name_len; + __u32 kernel_btf; } __attribute__((aligned(8))); struct bpf_link_info { @@ -4431,6 +6474,8 @@ struct bpf_link_info { } raw_tracepoint; struct { __u32 attach_type; + __u32 target_obj_id; /* prog_id for PROG_EXT, otherwise btf object id */ + __u32 target_btf_id; /* BTF type id inside the object */ } tracing; struct { __u64 cgroup_id; @@ -4439,11 +6484,26 @@ struct bpf_link_info { struct { __aligned_u64 target_name; /* in/out: target_name buffer ptr */ __u32 target_name_len; /* in/out: target_name buffer len */ + + /* If the iter specific field is 32 bits, it can be put + * in the first or second union. Otherwise it should be + * put in the second union. + */ union { struct { __u32 map_id; } map; }; + union { + struct { + __u64 cgroup_id; + __u32 order; + } cgroup; + struct { + __u32 tid; + __u32 pid; + } task; + }; } iter; struct { __u32 netns_ino; @@ -4452,6 +6512,49 @@ struct bpf_link_info { struct { __u32 ifindex; } xdp; + struct { + __u32 map_id; + } struct_ops; + struct { + __u32 pf; + __u32 hooknum; + __s32 priority; + __u32 flags; + } netfilter; + struct { + __aligned_u64 addrs; + __u32 count; /* in/out: kprobe_multi function count */ + __u32 flags; + } kprobe_multi; + struct { + __u32 type; /* enum bpf_perf_event_type */ + __u32 :32; + union { + struct { + __aligned_u64 file_name; /* in/out */ + __u32 name_len; + __u32 offset; /* offset from file_name */ + } uprobe; /* BPF_PERF_EVENT_UPROBE, BPF_PERF_EVENT_URETPROBE */ + struct { + __aligned_u64 func_name; /* in/out */ + __u32 name_len; + __u32 offset; /* offset from func_name */ + __u64 addr; + } kprobe; /* BPF_PERF_EVENT_KPROBE, BPF_PERF_EVENT_KRETPROBE */ + struct { + __aligned_u64 tp_name; /* in/out */ + __u32 name_len; + } tracepoint; /* BPF_PERF_EVENT_TRACEPOINT */ + struct { + __u64 config; + __u32 type; + } event; /* BPF_PERF_EVENT_EVENT */ + }; + } perf_event; + struct { + __u32 ifindex; + __u32 attach_type; + } tcx; }; } __attribute__((aligned(8))); @@ -4562,6 +6665,7 @@ struct bpf_sock_ops { * the outgoing header has not * been written yet. */ + __u64 skb_hwtstamp; }; /* Definitions for bpf_sock_ops_cb_flags */ @@ -4847,6 +6951,8 @@ struct bpf_raw_tracepoint_args { enum { BPF_FIB_LOOKUP_DIRECT = (1U << 0), BPF_FIB_LOOKUP_OUTPUT = (1U << 1), + BPF_FIB_LOOKUP_SKIP_NEIGH = (1U << 2), + BPF_FIB_LOOKUP_TBID = (1U << 3), }; enum { @@ -4872,9 +6978,13 @@ struct bpf_fib_lookup { __be16 sport; __be16 dport; - /* total length of packet from network header - used for MTU check */ - __u16 tot_len; + union { /* used for MTU check */ + /* input to lookup */ + __u16 tot_len; /* L3 length from network hdr (iph->tot_len) */ + /* output: MTU value */ + __u16 mtu_result; + }; /* input: L3 device index for lookup * output: device index from FIB lookup */ @@ -4903,9 +7013,19 @@ struct bpf_fib_lookup { __u32 ipv6_dst[4]; /* in6_addr; network order */ }; - /* output */ - __be16 h_vlan_proto; - __be16 h_vlan_TCI; + union { + struct { + /* output */ + __be16 h_vlan_proto; + __be16 h_vlan_TCI; + }; + /* input: when accompanied with the + * 'BPF_FIB_LOOKUP_DIRECT | BPF_FIB_LOOKUP_TBID` flags, a + * specific routing table to use for the fib lookup. + */ + __u32 tbid; + }; + __u8 smac[6]; /* ETH_ALEN */ __u8 dmac[6]; /* ETH_ALEN */ }; @@ -4920,6 +7040,17 @@ struct bpf_redir_neigh { }; }; +/* bpf_check_mtu flags*/ +enum bpf_check_mtu_flags { + BPF_MTU_CHK_SEGS = (1U << 0), +}; + +enum bpf_check_mtu_ret { + BPF_MTU_CHK_RET_SUCCESS, /* check and lookup successful */ + BPF_MTU_CHK_RET_FRAG_NEEDED, /* fragmentation required to fwd */ + BPF_MTU_CHK_RET_SEGS_TOOBIG, /* GSO re-segmentation needed to fwd */ +}; + enum bpf_task_fd_type { BPF_FD_TYPE_RAW_TRACEPOINT, /* tp name */ BPF_FD_TYPE_TRACEPOINT, /* tp name */ @@ -4979,6 +7110,43 @@ struct bpf_spin_lock { __u32 val; }; +struct bpf_timer { + __u64 :64; + __u64 :64; +} __attribute__((aligned(8))); + +struct bpf_dynptr { + __u64 :64; + __u64 :64; +} __attribute__((aligned(8))); + +struct bpf_list_head { + __u64 :64; + __u64 :64; +} __attribute__((aligned(8))); + +struct bpf_list_node { + __u64 :64; + __u64 :64; + __u64 :64; +} __attribute__((aligned(8))); + +struct bpf_rb_root { + __u64 :64; + __u64 :64; +} __attribute__((aligned(8))); + +struct bpf_rb_node { + __u64 :64; + __u64 :64; + __u64 :64; + __u64 :64; +} __attribute__((aligned(8))); + +struct bpf_refcount { + __u32 :32; +} __attribute__((aligned(4))); + struct bpf_sysctl { __u32 write; /* Sysctl is being read (= 0) or written (= 1). * Allows 1,2,4-byte read, but no write. @@ -5006,16 +7174,21 @@ struct bpf_pidns_info { /* User accessible data for SK_LOOKUP programs. Add new fields at the end. */ struct bpf_sk_lookup { - __bpf_md_ptr(struct bpf_sock *, sk); /* Selected socket */ + union { + __bpf_md_ptr(struct bpf_sock *, sk); /* Selected socket */ + __u64 cookie; /* Non-zero if socket was selected in PROG_TEST_RUN */ + }; __u32 family; /* Protocol family (AF_INET, AF_INET6) */ __u32 protocol; /* IP protocol (IPPROTO_TCP, IPPROTO_UDP) */ __u32 remote_ip4; /* Network byte order */ __u32 remote_ip6[4]; /* Network byte order */ - __u32 remote_port; /* Network byte order */ + __be16 remote_port; /* Network byte order */ + __u16 :16; /* Zero padding */ __u32 local_ip4; /* Network byte order */ __u32 local_ip6[4]; /* Network byte order */ __u32 local_port; /* Host byte order */ + __u32 ingress_ifindex; /* The arriving interface. Determined by inet_iif. */ }; /* @@ -5048,4 +7221,96 @@ enum { BTF_F_ZERO = (1ULL << 3), }; +/* bpf_core_relo_kind encodes which aspect of captured field/type/enum value + * has to be adjusted by relocations. It is emitted by llvm and passed to + * libbpf and later to the kernel. + */ +enum bpf_core_relo_kind { + BPF_CORE_FIELD_BYTE_OFFSET = 0, /* field byte offset */ + BPF_CORE_FIELD_BYTE_SIZE = 1, /* field size in bytes */ + BPF_CORE_FIELD_EXISTS = 2, /* field existence in target kernel */ + BPF_CORE_FIELD_SIGNED = 3, /* field signedness (0 - unsigned, 1 - signed) */ + BPF_CORE_FIELD_LSHIFT_U64 = 4, /* bitfield-specific left bitshift */ + BPF_CORE_FIELD_RSHIFT_U64 = 5, /* bitfield-specific right bitshift */ + BPF_CORE_TYPE_ID_LOCAL = 6, /* type ID in local BPF object */ + BPF_CORE_TYPE_ID_TARGET = 7, /* type ID in target kernel */ + BPF_CORE_TYPE_EXISTS = 8, /* type existence in target kernel */ + BPF_CORE_TYPE_SIZE = 9, /* type size in bytes */ + BPF_CORE_ENUMVAL_EXISTS = 10, /* enum value existence in target kernel */ + BPF_CORE_ENUMVAL_VALUE = 11, /* enum value integer value */ + BPF_CORE_TYPE_MATCHES = 12, /* type match in target kernel */ +}; + +/* + * "struct bpf_core_relo" is used to pass relocation data form LLVM to libbpf + * and from libbpf to the kernel. + * + * CO-RE relocation captures the following data: + * - insn_off - instruction offset (in bytes) within a BPF program that needs + * its insn->imm field to be relocated with actual field info; + * - type_id - BTF type ID of the "root" (containing) entity of a relocatable + * type or field; + * - access_str_off - offset into corresponding .BTF string section. String + * interpretation depends on specific relocation kind: + * - for field-based relocations, string encodes an accessed field using + * a sequence of field and array indices, separated by colon (:). It's + * conceptually very close to LLVM's getelementptr ([0]) instruction's + * arguments for identifying offset to a field. + * - for type-based relocations, strings is expected to be just "0"; + * - for enum value-based relocations, string contains an index of enum + * value within its enum type; + * - kind - one of enum bpf_core_relo_kind; + * + * Example: + * struct sample { + * int a; + * struct { + * int b[10]; + * }; + * }; + * + * struct sample *s = ...; + * int *x = &s->a; // encoded as "0:0" (a is field #0) + * int *y = &s->b[5]; // encoded as "0:1:0:5" (anon struct is field #1, + * // b is field #0 inside anon struct, accessing elem #5) + * int *z = &s[10]->b; // encoded as "10:1" (ptr is used as an array) + * + * type_id for all relocs in this example will capture BTF type id of + * `struct sample`. + * + * Such relocation is emitted when using __builtin_preserve_access_index() + * Clang built-in, passing expression that captures field address, e.g.: + * + * bpf_probe_read(&dst, sizeof(dst), + * __builtin_preserve_access_index(&src->a.b.c)); + * + * In this case Clang will emit field relocation recording necessary data to + * be able to find offset of embedded `a.b.c` field within `src` struct. + * + * [0] https://llvm.org/docs/LangRef.html#getelementptr-instruction + */ +struct bpf_core_relo { + __u32 insn_off; + __u32 type_id; + __u32 access_str_off; + enum bpf_core_relo_kind kind; +}; + +/* + * Flags to control bpf_timer_start() behaviour. + * - BPF_F_TIMER_ABS: Timeout passed is absolute time, by default it is + * relative to current time. + */ +enum { + BPF_F_TIMER_ABS = (1ULL << 0), +}; + +/* BPF numbers iterator state */ +struct bpf_iter_num { + /* opaque iterator state; having __u64 here allows to preserve correct + * alignment requirements in vmlinux.h, generated from BTF + */ + __u64 __opaque[1]; +} __attribute__((aligned(8))); + #endif /* __LINUX_BPF_H__ */ diff --git a/linux-headers/include/linux/btf.h b/linux-headers/include/linux/btf.h index 4a42eb481f7..426daf5aa61 100644 --- a/linux-headers/include/linux/btf.h +++ b/linux-headers/include/linux/btf.h @@ -33,17 +33,17 @@ struct btf_type { /* "info" bits arrangement * bits 0-15: vlen (e.g. # of struct's members) * bits 16-23: unused - * bits 24-27: kind (e.g. int, ptr, array...etc) - * bits 28-30: unused + * bits 24-28: kind (e.g. int, ptr, array...etc) + * bits 29-30: unused * bit 31: kind_flag, currently used by - * struct, union and fwd + * struct, union, enum, fwd and enum64 */ __u32 info; - /* "size" is used by INT, ENUM, STRUCT, UNION and DATASEC. + /* "size" is used by INT, ENUM, STRUCT, UNION, DATASEC and ENUM64. * "size" tells the size of the type it is describing. * * "type" is used by PTR, TYPEDEF, VOLATILE, CONST, RESTRICT, - * FUNC, FUNC_PROTO and VAR. + * FUNC, FUNC_PROTO, VAR, DECL_TAG and TYPE_TAG. * "type" is a type_id referring to another type. */ union { @@ -52,28 +52,35 @@ struct btf_type { }; }; -#define BTF_INFO_KIND(info) (((info) >> 24) & 0x0f) +#define BTF_INFO_KIND(info) (((info) >> 24) & 0x1f) #define BTF_INFO_VLEN(info) ((info) & 0xffff) #define BTF_INFO_KFLAG(info) ((info) >> 31) -#define BTF_KIND_UNKN 0 /* Unknown */ -#define BTF_KIND_INT 1 /* Integer */ -#define BTF_KIND_PTR 2 /* Pointer */ -#define BTF_KIND_ARRAY 3 /* Array */ -#define BTF_KIND_STRUCT 4 /* Struct */ -#define BTF_KIND_UNION 5 /* Union */ -#define BTF_KIND_ENUM 6 /* Enumeration */ -#define BTF_KIND_FWD 7 /* Forward */ -#define BTF_KIND_TYPEDEF 8 /* Typedef */ -#define BTF_KIND_VOLATILE 9 /* Volatile */ -#define BTF_KIND_CONST 10 /* Const */ -#define BTF_KIND_RESTRICT 11 /* Restrict */ -#define BTF_KIND_FUNC 12 /* Function */ -#define BTF_KIND_FUNC_PROTO 13 /* Function Proto */ -#define BTF_KIND_VAR 14 /* Variable */ -#define BTF_KIND_DATASEC 15 /* Section */ -#define BTF_KIND_MAX BTF_KIND_DATASEC -#define NR_BTF_KINDS (BTF_KIND_MAX + 1) +enum { + BTF_KIND_UNKN = 0, /* Unknown */ + BTF_KIND_INT = 1, /* Integer */ + BTF_KIND_PTR = 2, /* Pointer */ + BTF_KIND_ARRAY = 3, /* Array */ + BTF_KIND_STRUCT = 4, /* Struct */ + BTF_KIND_UNION = 5, /* Union */ + BTF_KIND_ENUM = 6, /* Enumeration up to 32-bit values */ + BTF_KIND_FWD = 7, /* Forward */ + BTF_KIND_TYPEDEF = 8, /* Typedef */ + BTF_KIND_VOLATILE = 9, /* Volatile */ + BTF_KIND_CONST = 10, /* Const */ + BTF_KIND_RESTRICT = 11, /* Restrict */ + BTF_KIND_FUNC = 12, /* Function */ + BTF_KIND_FUNC_PROTO = 13, /* Function Proto */ + BTF_KIND_VAR = 14, /* Variable */ + BTF_KIND_DATASEC = 15, /* Section */ + BTF_KIND_FLOAT = 16, /* Floating point */ + BTF_KIND_DECL_TAG = 17, /* Decl Tag */ + BTF_KIND_TYPE_TAG = 18, /* Type Tag */ + BTF_KIND_ENUM64 = 19, /* Enumeration up to 64-bit values */ + + NR_BTF_KINDS, + BTF_KIND_MAX = NR_BTF_KINDS - 1, +}; /* For some specific BTF_KIND, "struct btf_type" is immediately * followed by extra data. @@ -169,4 +176,25 @@ struct btf_var_secinfo { __u32 size; }; +/* BTF_KIND_DECL_TAG is followed by a single "struct btf_decl_tag" to describe + * additional information related to the tag applied location. + * If component_idx == -1, the tag is applied to a struct, union, + * variable or function. Otherwise, it is applied to a struct/union + * member or a func argument, and component_idx indicates which member + * or argument (0 ... vlen-1). + */ +struct btf_decl_tag { + __s32 component_idx; +}; + +/* BTF_KIND_ENUM64 is followed by multiple "struct btf_enum64". + * The exact number of btf_enum64 is stored in the vlen (of the + * info in "struct btf_type"). + */ +struct btf_enum64 { + __u32 name_off; + __u32 val_lo32; + __u32 val_hi32; +}; + #endif /* __LINUX_BTF_H__ */ diff --git a/linux-headers/include/linux/btrfs.h b/linux-headers/include/linux/btrfs.h index f0940c6b69f..12965125cd0 100644 --- a/linux-headers/include/linux/btrfs.h +++ b/linux-headers/include/linux/btrfs.h @@ -19,8 +19,14 @@ #ifndef _LINUX_BTRFS_H #define _LINUX_BTRFS_H + +#ifdef __cplusplus +extern "C" { +#endif + #include #include +#include #define BTRFS_IOCTL_MAGIC 0x94 #define BTRFS_VOL_NAME_MAX 255 @@ -91,7 +97,7 @@ struct btrfs_qgroup_inherit { __u64 num_ref_copies; __u64 num_excl_copies; struct btrfs_qgroup_limit lim; - __u64 qgroups[0]; + __u64 qgroups[]; }; struct btrfs_ioctl_qgroup_limit_args { @@ -152,7 +158,7 @@ struct btrfs_scrub_progress { __u64 tree_bytes_scrubbed; /* # of tree bytes scrubbed */ __u64 read_errors; /* # of read errors encountered (EIO) */ __u64 csum_errors; /* # of failed csum checks */ - __u64 verify_errors; /* # of occurences, where the metadata + __u64 verify_errors; /* # of occurrences, where the metadata * of a tree block did not match the * expected values, like generation or * logical */ @@ -172,13 +178,14 @@ struct btrfs_scrub_progress { __u64 last_physical; /* last physical address scrubbed. In * case a scrub was aborted, this can * be used to restart the scrub */ - __u64 unverified_errors; /* # of occurences where a read for a + __u64 unverified_errors; /* # of occurrences where a read for a * full (64k) bio failed, but the re- * check succeeded for each 4k piece. * Intermittent error. */ }; #define BTRFS_SCRUB_READONLY 1 +#define BTRFS_SCRUB_SUPPORTED_FLAGS (BTRFS_SCRUB_READONLY) struct btrfs_ioctl_scrub_args { __u64 devid; /* in */ __u64 start; /* in */ @@ -237,7 +244,17 @@ struct btrfs_ioctl_dev_info_args { __u8 uuid[BTRFS_UUID_SIZE]; /* in/out */ __u64 bytes_used; /* out */ __u64 total_bytes; /* out */ - __u64 unused[379]; /* pad to 4k */ + /* + * Optional, out. + * + * Showing the fsid of the device, allowing user space to check if this + * device is a seeding one. + * + * Introduced in v6.3, thus user space still needs to check if kernel + * changed this value. Older kernel will not touch the values here. + */ + __u8 fsid[BTRFS_UUID_SIZE]; + __u64 unused[377]; /* pad to 4k */ __u8 path[BTRFS_DEVICE_PATH_NAME_MAX]; /* out */ }; @@ -286,6 +303,13 @@ struct btrfs_ioctl_fs_info_args { * first mount when booting older kernel versions. */ #define BTRFS_FEATURE_COMPAT_RO_FREE_SPACE_TREE_VALID (1ULL << 1) +#define BTRFS_FEATURE_COMPAT_RO_VERITY (1ULL << 2) + +/* + * Put all block group items into a dedicated block group tree, greatly + * reducing mount time for large filesystem due to better locality. + */ +#define BTRFS_FEATURE_COMPAT_RO_BLOCK_GROUP_TREE (1ULL << 3) #define BTRFS_FEATURE_INCOMPAT_MIXED_BACKREF (1ULL << 0) #define BTRFS_FEATURE_INCOMPAT_DEFAULT_SUBVOL (1ULL << 1) @@ -305,6 +329,8 @@ struct btrfs_ioctl_fs_info_args { #define BTRFS_FEATURE_INCOMPAT_NO_HOLES (1ULL << 9) #define BTRFS_FEATURE_INCOMPAT_METADATA_UUID (1ULL << 10) #define BTRFS_FEATURE_INCOMPAT_RAID1C34 (1ULL << 11) +#define BTRFS_FEATURE_INCOMPAT_ZONED (1ULL << 12) +#define BTRFS_FEATURE_INCOMPAT_EXTENT_TREE_V2 (1ULL << 13) struct btrfs_ioctl_feature_flags { __u64 compat_flags; @@ -322,6 +348,12 @@ struct btrfs_ioctl_feature_flags { */ struct btrfs_balance_args { __u64 profiles; + + /* + * usage filter + * BTRFS_BALANCE_ARGS_USAGE with a single value means '0..N' + * BTRFS_BALANCE_ARGS_USAGE_RANGE - range syntax, min..max + */ union { __u64 usage; struct { @@ -538,7 +570,7 @@ struct btrfs_ioctl_search_header { __u64 offset; __u32 type; __u32 len; -}; +} __attribute__ ((__may_alias__)); #define BTRFS_SEARCH_ARGS_BUFSIZE (4096 - sizeof(struct btrfs_ioctl_search_key)) /* @@ -551,18 +583,23 @@ struct btrfs_ioctl_search_args { char buf[BTRFS_SEARCH_ARGS_BUFSIZE]; }; +/* + * Extended version of TREE_SEARCH ioctl that can return more than 4k of bytes. + * The allocated size of the buffer is set in buf_size. + */ struct btrfs_ioctl_search_args_v2 { struct btrfs_ioctl_search_key key; /* in/out - search parameters */ __u64 buf_size; /* in - size of buffer * out - on EOVERFLOW: needed size * to store item */ - __u64 buf[0]; /* out - found items */ + __u64 buf[]; /* out - found items */ }; +/* With a @src_length of zero, the range from @src_offset->EOF is cloned! */ struct btrfs_ioctl_clone_range_args { - __s64 src_fd; - __u64 src_offset, src_length; - __u64 dest_offset; + __s64 src_fd; + __u64 src_offset, src_length; + __u64 dest_offset; }; /* @@ -627,7 +664,7 @@ struct btrfs_ioctl_same_args { __u16 dest_count; /* in - total elements in info array */ __u16 reserved1; __u32 reserved2; - struct btrfs_ioctl_same_extent_info info[0]; + struct btrfs_ioctl_same_extent_info info[]; }; struct btrfs_ioctl_space_info { @@ -639,7 +676,7 @@ struct btrfs_ioctl_space_info { struct btrfs_ioctl_space_args { __u64 space_slots; __u64 total_spaces; - struct btrfs_ioctl_space_info spaces[0]; + struct btrfs_ioctl_space_info spaces[]; }; struct btrfs_data_container { @@ -647,7 +684,7 @@ struct btrfs_data_container { __u32 bytes_missing; /* out -- additional bytes needed for result */ __u32 elem_cnt; /* out */ __u32 elem_missed; /* out */ - __u64 val[0]; /* out */ + __u64 val[]; /* out */ }; struct btrfs_ioctl_ino_path_args { @@ -666,8 +703,11 @@ struct btrfs_ioctl_logical_ino_args { /* struct btrfs_data_container *inodes; out */ __u64 inodes; }; -/* Return every ref to the extent, not just those containing logical block. - * Requires logical == extent bytenr. */ + +/* + * Return every ref to the extent, not just those containing logical block. + * Requires logical == extent bytenr. + */ #define BTRFS_LOGICAL_INO_ARGS_IGNORE_OFFSET (1ULL << 0) enum btrfs_dev_stat_values { @@ -767,10 +807,24 @@ struct btrfs_ioctl_received_subvol_args { */ #define BTRFS_SEND_FLAG_OMIT_END_CMD 0x4 +/* + * Read the protocol version in the structure + */ +#define BTRFS_SEND_FLAG_VERSION 0x8 + +/* + * Send compressed data using the ENCODED_WRITE command instead of decompressing + * the data and sending it with the WRITE command. This requires protocol + * version >= 2. + */ +#define BTRFS_SEND_FLAG_COMPRESSED 0x10 + #define BTRFS_SEND_FLAG_MASK \ (BTRFS_SEND_FLAG_NO_FILE_DATA | \ BTRFS_SEND_FLAG_OMIT_STREAM_HEADER | \ - BTRFS_SEND_FLAG_OMIT_END_CMD) + BTRFS_SEND_FLAG_OMIT_END_CMD | \ + BTRFS_SEND_FLAG_VERSION | \ + BTRFS_SEND_FLAG_COMPRESSED) struct btrfs_ioctl_send_args { __s64 send_fd; /* in */ @@ -778,7 +832,8 @@ struct btrfs_ioctl_send_args { __u64 *clone_sources; /* in */ __u64 parent_root; /* in */ __u64 flags; /* in */ - __u64 reserved[4]; /* in */ + __u32 version; /* in */ + __u8 reserved[28]; /* in */ }; /* @@ -857,6 +912,134 @@ struct btrfs_ioctl_get_subvol_rootref_args { __u8 align[7]; }; +/* + * Data and metadata for an encoded read or write. + * + * Encoded I/O bypasses any encoding automatically done by the filesystem (e.g., + * compression). This can be used to read the compressed contents of a file or + * write pre-compressed data directly to a file. + * + * BTRFS_IOC_ENCODED_READ and BTRFS_IOC_ENCODED_WRITE are essentially + * preadv/pwritev with additional metadata about how the data is encoded and the + * size of the unencoded data. + * + * BTRFS_IOC_ENCODED_READ fills the given iovecs with the encoded data, fills + * the metadata fields, and returns the size of the encoded data. It reads one + * extent per call. It can also read data which is not encoded. + * + * BTRFS_IOC_ENCODED_WRITE uses the metadata fields, writes the encoded data + * from the iovecs, and returns the size of the encoded data. Note that the + * encoded data is not validated when it is written; if it is not valid (e.g., + * it cannot be decompressed), then a subsequent read may return an error. + * + * Since the filesystem page cache contains decoded data, encoded I/O bypasses + * the page cache. Encoded I/O requires CAP_SYS_ADMIN. + */ +struct btrfs_ioctl_encoded_io_args { + /* Input parameters for both reads and writes. */ + + /* + * iovecs containing encoded data. + * + * For reads, if the size of the encoded data is larger than the sum of + * iov[n].iov_len for 0 <= n < iovcnt, then the ioctl fails with + * ENOBUFS. + * + * For writes, the size of the encoded data is the sum of iov[n].iov_len + * for 0 <= n < iovcnt. This must be less than 128 KiB (this limit may + * increase in the future). This must also be less than or equal to + * unencoded_len. + */ + const struct iovec *iov; + /* Number of iovecs. */ + unsigned long iovcnt; + /* + * Offset in file. + * + * For writes, must be aligned to the sector size of the filesystem. + */ + __s64 offset; + /* Currently must be zero. */ + __u64 flags; + + /* + * For reads, the following members are output parameters that will + * contain the returned metadata for the encoded data. + * For writes, the following members must be set to the metadata for the + * encoded data. + */ + + /* + * Length of the data in the file. + * + * Must be less than or equal to unencoded_len - unencoded_offset. For + * writes, must be aligned to the sector size of the filesystem unless + * the data ends at or beyond the current end of the file. + */ + __u64 len; + /* + * Length of the unencoded (i.e., decrypted and decompressed) data. + * + * For writes, must be no more than 128 KiB (this limit may increase in + * the future). If the unencoded data is actually longer than + * unencoded_len, then it is truncated; if it is shorter, then it is + * extended with zeroes. + */ + __u64 unencoded_len; + /* + * Offset from the first byte of the unencoded data to the first byte of + * logical data in the file. + * + * Must be less than unencoded_len. + */ + __u64 unencoded_offset; + /* + * BTRFS_ENCODED_IO_COMPRESSION_* type. + * + * For writes, must not be BTRFS_ENCODED_IO_COMPRESSION_NONE. + */ + __u32 compression; + /* Currently always BTRFS_ENCODED_IO_ENCRYPTION_NONE. */ + __u32 encryption; + /* + * Reserved for future expansion. + * + * For reads, always returned as zero. Users should check for non-zero + * bytes. If there are any, then the kernel has a newer version of this + * structure with additional information that the user definition is + * missing. + * + * For writes, must be zeroed. + */ + __u8 reserved[64]; +}; + +/* Data is not compressed. */ +#define BTRFS_ENCODED_IO_COMPRESSION_NONE 0 +/* Data is compressed as a single zlib stream. */ +#define BTRFS_ENCODED_IO_COMPRESSION_ZLIB 1 +/* + * Data is compressed as a single zstd frame with the windowLog compression + * parameter set to no more than 17. + */ +#define BTRFS_ENCODED_IO_COMPRESSION_ZSTD 2 +/* + * Data is compressed sector by sector (using the sector size indicated by the + * name of the constant) with LZO1X and wrapped in the format documented in + * fs/btrfs/lzo.c. For writes, the compression sector size must match the + * filesystem sector size. + */ +#define BTRFS_ENCODED_IO_COMPRESSION_LZO_4K 3 +#define BTRFS_ENCODED_IO_COMPRESSION_LZO_8K 4 +#define BTRFS_ENCODED_IO_COMPRESSION_LZO_16K 5 +#define BTRFS_ENCODED_IO_COMPRESSION_LZO_32K 6 +#define BTRFS_ENCODED_IO_COMPRESSION_LZO_64K 7 +#define BTRFS_ENCODED_IO_COMPRESSION_TYPES 8 + +/* Data is not encrypted. */ +#define BTRFS_ENCODED_IO_ENCRYPTION_NONE 0 +#define BTRFS_ENCODED_IO_ENCRYPTION_TYPES 1 + /* Error codes as returned by the kernel */ enum btrfs_err_code { BTRFS_ERROR_DEV_RAID1_MIN_NOT_MET = 1, @@ -985,5 +1168,13 @@ enum btrfs_err_code { struct btrfs_ioctl_ino_lookup_user_args) #define BTRFS_IOC_SNAP_DESTROY_V2 _IOW(BTRFS_IOCTL_MAGIC, 63, \ struct btrfs_ioctl_vol_args_v2) +#define BTRFS_IOC_ENCODED_READ _IOR(BTRFS_IOCTL_MAGIC, 64, \ + struct btrfs_ioctl_encoded_io_args) +#define BTRFS_IOC_ENCODED_WRITE _IOW(BTRFS_IOCTL_MAGIC, 64, \ + struct btrfs_ioctl_encoded_io_args) + +#ifdef __cplusplus +} +#endif #endif /* _LINUX_BTRFS_H */ diff --git a/linux-headers/include/linux/btrfs_tree.h b/linux-headers/include/linux/btrfs_tree.h index d9a890d55d5..46b40848ac7 100644 --- a/linux-headers/include/linux/btrfs_tree.h +++ b/linux-headers/include/linux/btrfs_tree.h @@ -6,6 +6,23 @@ #include #include +/* ASCII for _BHRfS_M, no terminating nul */ +#define BTRFS_MAGIC 0x4D5F53665248425FULL + +#define BTRFS_MAX_LEVEL 8 + +/* + * We can actually store much bigger names, but lets not confuse the rest of + * linux. + */ +#define BTRFS_NAME_LEN 255 + +/* + * Theoretical limit is larger, but we keep this down to a sane value. That + * should limit greatly the possibility of collisions on inode ref items. + */ +#define BTRFS_LINK_MAX 65535U + /* * This header contains the structure definitions and constants used * by file system objects that can be retrieved using @@ -49,13 +66,16 @@ /* tracks free space in block groups. */ #define BTRFS_FREE_SPACE_TREE_OBJECTID 10ULL +/* Holds the block group items for extent tree v2. */ +#define BTRFS_BLOCK_GROUP_TREE_OBJECTID 11ULL + /* device stats in the device tree */ #define BTRFS_DEV_STATS_OBJECTID 0ULL /* for storing balance parameters in the root tree */ #define BTRFS_BALANCE_OBJECTID -4ULL -/* orhpan objectid for tracking unlinked/truncated files */ +/* orphan objectid for tracking unlinked/truncated files */ #define BTRFS_ORPHAN_OBJECTID -5ULL /* does write ahead logging to speed up fsyncs */ @@ -114,12 +134,37 @@ #define BTRFS_INODE_REF_KEY 12 #define BTRFS_INODE_EXTREF_KEY 13 #define BTRFS_XATTR_ITEM_KEY 24 + +/* + * fs verity items are stored under two different key types on disk. + * The descriptor items: + * [ inode objectid, BTRFS_VERITY_DESC_ITEM_KEY, offset ] + * + * At offset 0, we store a btrfs_verity_descriptor_item which tracks the size + * of the descriptor item and some extra data for encryption. + * Starting at offset 1, these hold the generic fs verity descriptor. The + * latter are opaque to btrfs, we just read and write them as a blob for the + * higher level verity code. The most common descriptor size is 256 bytes. + * + * The merkle tree items: + * [ inode objectid, BTRFS_VERITY_MERKLE_ITEM_KEY, offset ] + * + * These also start at offset 0, and correspond to the merkle tree bytes. When + * fsverity asks for page 0 of the merkle tree, we pull up one page starting at + * offset 0 for this key type. These are also opaque to btrfs, we're blindly + * storing whatever fsverity sends down. + */ +#define BTRFS_VERITY_DESC_ITEM_KEY 36 +#define BTRFS_VERITY_MERKLE_ITEM_KEY 37 + #define BTRFS_ORPHAN_ITEM_KEY 48 /* reserve 2-15 close to the inode for later flexibility */ /* * dir items are the name -> inode pointers in a directory. There is one - * for every name in a directory. + * for every name in a directory. BTRFS_DIR_LOG_ITEM_KEY is no longer used + * but it's still defined here for documentation purposes and to help avoid + * having its numerical value reused in the future. */ #define BTRFS_DIR_LOG_ITEM_KEY 60 #define BTRFS_DIR_LOG_INDEX_KEY 72 @@ -171,7 +216,11 @@ #define BTRFS_EXTENT_DATA_REF_KEY 178 -#define BTRFS_EXTENT_REF_V0_KEY 180 +/* + * Obsolete key. Defintion removed in 6.6, value may be reused in the future. + * + * #define BTRFS_EXTENT_REF_V0_KEY 180 + */ #define BTRFS_SHARED_BLOCK_REF_KEY 182 @@ -271,7 +320,7 @@ #define BTRFS_PERSISTENT_ITEM_KEY 249 /* - * Persistantly stores the device replace state in the device tree. + * Persistently stores the device replace state in the device tree. * The key is built like this: (0, BTRFS_DEV_REPLACE_KEY, 0). */ #define BTRFS_DEV_REPLACE_KEY 250 @@ -295,7 +344,8 @@ */ #define BTRFS_STRING_ITEM_KEY 253 - +/* Maximum metadata block size (nodesize) */ +#define BTRFS_MAX_METADATA_BLOCKSIZE 65536 /* 32 bytes in various csum fields */ #define BTRFS_CSUM_SIZE 32 @@ -326,6 +376,50 @@ enum btrfs_csum_type { #define BTRFS_FT_SYMLINK 7 #define BTRFS_FT_XATTR 8 #define BTRFS_FT_MAX 9 +/* Directory contains encrypted data */ +#define BTRFS_FT_ENCRYPTED 0x80 + +static __inline__ __u8 btrfs_dir_flags_to_ftype(__u8 flags) +{ + return flags & ~BTRFS_FT_ENCRYPTED; +} + +/* + * Inode flags + */ +#define BTRFS_INODE_NODATASUM (1U << 0) +#define BTRFS_INODE_NODATACOW (1U << 1) +#define BTRFS_INODE_READONLY (1U << 2) +#define BTRFS_INODE_NOCOMPRESS (1U << 3) +#define BTRFS_INODE_PREALLOC (1U << 4) +#define BTRFS_INODE_SYNC (1U << 5) +#define BTRFS_INODE_IMMUTABLE (1U << 6) +#define BTRFS_INODE_APPEND (1U << 7) +#define BTRFS_INODE_NODUMP (1U << 8) +#define BTRFS_INODE_NOATIME (1U << 9) +#define BTRFS_INODE_DIRSYNC (1U << 10) +#define BTRFS_INODE_COMPRESS (1U << 11) + +#define BTRFS_INODE_ROOT_ITEM_INIT (1U << 31) + +#define BTRFS_INODE_FLAG_MASK \ + (BTRFS_INODE_NODATASUM | \ + BTRFS_INODE_NODATACOW | \ + BTRFS_INODE_READONLY | \ + BTRFS_INODE_NOCOMPRESS | \ + BTRFS_INODE_PREALLOC | \ + BTRFS_INODE_SYNC | \ + BTRFS_INODE_IMMUTABLE | \ + BTRFS_INODE_APPEND | \ + BTRFS_INODE_NODUMP | \ + BTRFS_INODE_NOATIME | \ + BTRFS_INODE_DIRSYNC | \ + BTRFS_INODE_COMPRESS | \ + BTRFS_INODE_ROOT_ITEM_INIT) + +#define BTRFS_INODE_RO_VERITY (1U << 0) + +#define BTRFS_INODE_RO_FLAG_MASK (BTRFS_INODE_RO_VERITY) /* * The key defines the order in the tree, and so it also defines (optimal) @@ -356,6 +450,109 @@ struct btrfs_key { __u64 offset; } __attribute__ ((__packed__)); +/* + * Every tree block (leaf or node) starts with this header. + */ +struct btrfs_header { + /* These first four must match the super block */ + __u8 csum[BTRFS_CSUM_SIZE]; + /* FS specific uuid */ + __u8 fsid[BTRFS_FSID_SIZE]; + /* Which block this node is supposed to live in */ + __le64 bytenr; + __le64 flags; + + /* Allowed to be different from the super from here on down */ + __u8 chunk_tree_uuid[BTRFS_UUID_SIZE]; + __le64 generation; + __le64 owner; + __le32 nritems; + __u8 level; +} __attribute__ ((__packed__)); + +/* + * This is a very generous portion of the super block, giving us room to + * translate 14 chunks with 3 stripes each. + */ +#define BTRFS_SYSTEM_CHUNK_ARRAY_SIZE 2048 + +/* + * Just in case we somehow lose the roots and are not able to mount, we store + * an array of the roots from previous transactions in the super. + */ +#define BTRFS_NUM_BACKUP_ROOTS 4 +struct btrfs_root_backup { + __le64 tree_root; + __le64 tree_root_gen; + + __le64 chunk_root; + __le64 chunk_root_gen; + + __le64 extent_root; + __le64 extent_root_gen; + + __le64 fs_root; + __le64 fs_root_gen; + + __le64 dev_root; + __le64 dev_root_gen; + + __le64 csum_root; + __le64 csum_root_gen; + + __le64 total_bytes; + __le64 bytes_used; + __le64 num_devices; + /* future */ + __le64 unused_64[4]; + + __u8 tree_root_level; + __u8 chunk_root_level; + __u8 extent_root_level; + __u8 fs_root_level; + __u8 dev_root_level; + __u8 csum_root_level; + /* future and to align */ + __u8 unused_8[10]; +} __attribute__ ((__packed__)); + +/* + * A leaf is full of items. offset and size tell us where to find the item in + * the leaf (relative to the start of the data area) + */ +struct btrfs_item { + struct btrfs_disk_key key; + __le32 offset; + __le32 size; +} __attribute__ ((__packed__)); + +/* + * Leaves have an item area and a data area: + * [item0, item1....itemN] [free space] [dataN...data1, data0] + * + * The data is separate from the items to get the keys closer together during + * searches. + */ +struct btrfs_leaf { + struct btrfs_header header; + struct btrfs_item items[]; +} __attribute__ ((__packed__)); + +/* + * All non-leaf blocks are nodes, they hold only keys and pointers to other + * blocks. + */ +struct btrfs_key_ptr { + struct btrfs_disk_key key; + __le64 blockptr; + __le64 generation; +} __attribute__ ((__packed__)); + +struct btrfs_node { + struct btrfs_header header; + struct btrfs_key_ptr ptrs[]; +} __attribute__ ((__packed__)); + struct btrfs_dev_item { /* the internal btrfs device id */ __le64 devid; @@ -439,6 +636,69 @@ struct btrfs_chunk { /* additional stripes go here */ } __attribute__ ((__packed__)); +/* + * The super block basically lists the main trees of the FS. + */ +struct btrfs_super_block { + /* The first 4 fields must match struct btrfs_header */ + __u8 csum[BTRFS_CSUM_SIZE]; + /* FS specific UUID, visible to user */ + __u8 fsid[BTRFS_FSID_SIZE]; + /* This block number */ + __le64 bytenr; + __le64 flags; + + /* Allowed to be different from the btrfs_header from here own down */ + __le64 magic; + __le64 generation; + __le64 root; + __le64 chunk_root; + __le64 log_root; + + /* + * This member has never been utilized since the very beginning, thus + * it's always 0 regardless of kernel version. We always use + * generation + 1 to read log tree root. So here we mark it deprecated. + */ + __le64 __unused_log_root_transid; + __le64 total_bytes; + __le64 bytes_used; + __le64 root_dir_objectid; + __le64 num_devices; + __le32 sectorsize; + __le32 nodesize; + __le32 __unused_leafsize; + __le32 stripesize; + __le32 sys_chunk_array_size; + __le64 chunk_root_generation; + __le64 compat_flags; + __le64 compat_ro_flags; + __le64 incompat_flags; + __le16 csum_type; + __u8 root_level; + __u8 chunk_root_level; + __u8 log_root_level; + struct btrfs_dev_item dev_item; + + char label[BTRFS_LABEL_SIZE]; + + __le64 cache_generation; + __le64 uuid_tree_generation; + + /* The UUID written into btree blocks */ + __u8 metadata_uuid[BTRFS_FSID_SIZE]; + + __u64 nr_global_roots; + + /* Future expansion */ + __le64 reserved[27]; + __u8 sys_chunk_array[BTRFS_SYSTEM_CHUNK_ARRAY_SIZE]; + struct btrfs_root_backup super_roots[BTRFS_NUM_BACKUP_ROOTS]; + + /* Padded to 4096 bytes */ + __u8 padding[565]; +} __attribute__ ((__packed__)); + #define BTRFS_FREE_SPACE_EXTENT 1 #define BTRFS_FREE_SPACE_BITMAP 2 @@ -493,6 +753,14 @@ struct btrfs_extent_item_v0 { /* use full backrefs for extent pointers in the block */ #define BTRFS_BLOCK_FLAG_FULL_BACKREF (1ULL << 8) +#define BTRFS_BACKREF_REV_MAX 256 +#define BTRFS_BACKREF_REV_SHIFT 56 +#define BTRFS_BACKREF_REV_MASK (((u64)BTRFS_BACKREF_REV_MAX - 1) << \ + BTRFS_BACKREF_REV_SHIFT) + +#define BTRFS_OLD_BACKREF_REV 0 +#define BTRFS_MIXED_BACKREF_REV 1 + /* * this flag is only used internally by scrub and may be changed at any time * it is only declared here to avoid collisions @@ -542,7 +810,7 @@ struct btrfs_inode_extref { __le64 parent_objectid; __le64 index; __le16 name_len; - __u8 name[0]; + __u8 name[]; /* name goes here */ } __attribute__ ((__packed__)); @@ -847,19 +1115,6 @@ struct btrfs_dev_replace_item { #define BTRFS_BLOCK_GROUP_RESERVED (BTRFS_AVAIL_ALLOC_BIT_SINGLE | \ BTRFS_SPACE_INFO_GLOBAL_RSV) -enum btrfs_raid_types { - BTRFS_RAID_RAID10, - BTRFS_RAID_RAID1, - BTRFS_RAID_DUP, - BTRFS_RAID_RAID0, - BTRFS_RAID_SINGLE, - BTRFS_RAID_RAID5, - BTRFS_RAID_RAID6, - BTRFS_RAID_RAID1C3, - BTRFS_RAID_RAID1C4, - BTRFS_NR_RAID_TYPES -}; - #define BTRFS_BLOCK_GROUP_TYPE_MASK (BTRFS_BLOCK_GROUP_DATA | \ BTRFS_BLOCK_GROUP_SYSTEM | \ BTRFS_BLOCK_GROUP_METADATA) @@ -945,6 +1200,10 @@ static __inline__ __u16 btrfs_qgroup_level(__u64 qgroupid) */ #define BTRFS_QGROUP_STATUS_FLAG_INCONSISTENT (1ULL << 2) +#define BTRFS_QGROUP_STATUS_FLAGS_MASK (BTRFS_QGROUP_STATUS_FLAG_ON | \ + BTRFS_QGROUP_STATUS_FLAG_RESCAN | \ + BTRFS_QGROUP_STATUS_FLAG_INCONSISTENT) + #define BTRFS_QGROUP_STATUS_VERSION 1 struct btrfs_qgroup_status_item { @@ -986,4 +1245,16 @@ struct btrfs_qgroup_limit_item { __le64 rsv_excl; } __attribute__ ((__packed__)); +struct btrfs_verity_descriptor_item { + /* Size of the verity descriptor in bytes */ + __le64 size; + /* + * When we implement support for fscrypt, we will need to encrypt the + * Merkle tree for encrypted verity files. These 128 bits are for the + * eventual storage of an fscrypt initialization vector. + */ + __le64 reserved[2]; + __u8 encryption; +} __attribute__ ((__packed__)); + #endif /* _BTRFS_CTREE_H_ */ diff --git a/linux-headers/include/linux/byteorder/big_endian.h b/linux-headers/include/linux/byteorder/big_endian.h index 97758be73a4..3bb87c573cd 100644 --- a/linux-headers/include/linux/byteorder/big_endian.h +++ b/linux-headers/include/linux/byteorder/big_endian.h @@ -9,6 +9,7 @@ #define __BIG_ENDIAN_BITFIELD #endif +#include #include #include diff --git a/linux-headers/include/linux/byteorder/little_endian.h b/linux-headers/include/linux/byteorder/little_endian.h index 6be60ff6829..ba6c199c9b6 100644 --- a/linux-headers/include/linux/byteorder/little_endian.h +++ b/linux-headers/include/linux/byteorder/little_endian.h @@ -9,6 +9,7 @@ #define __LITTLE_ENDIAN_BITFIELD #endif +#include #include #include diff --git a/linux-headers/include/linux/cachefiles.h b/linux-headers/include/linux/cachefiles.h new file mode 100644 index 00000000000..78caa73e534 --- /dev/null +++ b/linux-headers/include/linux/cachefiles.h @@ -0,0 +1,68 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _LINUX_CACHEFILES_H +#define _LINUX_CACHEFILES_H + +#include +#include + +/* + * Fscache ensures that the maximum length of cookie key is 255. The volume key + * is controlled by netfs, and generally no bigger than 255. + */ +#define CACHEFILES_MSG_MAX_SIZE 1024 + +enum cachefiles_opcode { + CACHEFILES_OP_OPEN, + CACHEFILES_OP_CLOSE, + CACHEFILES_OP_READ, +}; + +/* + * Message Header + * + * @msg_id a unique ID identifying this message + * @opcode message type, CACHEFILE_OP_* + * @len message length, including message header and following data + * @object_id a unique ID identifying a cache file + * @data message type specific payload + */ +struct cachefiles_msg { + __u32 msg_id; + __u32 opcode; + __u32 len; + __u32 object_id; + __u8 data[]; +}; + +/* + * @data contains the volume_key followed directly by the cookie_key. volume_key + * is a NUL-terminated string; @volume_key_size indicates the size of the volume + * key in bytes. cookie_key is binary data, which is netfs specific; + * @cookie_key_size indicates the size of the cookie key in bytes. + * + * @fd identifies an anon_fd referring to the cache file. + */ +struct cachefiles_open { + __u32 volume_key_size; + __u32 cookie_key_size; + __u32 fd; + __u32 flags; + __u8 data[]; +}; + +/* + * @off indicates the starting offset of the requested file range + * @len indicates the length of the requested file range + */ +struct cachefiles_read { + __u64 off; + __u64 len; +}; + +/* + * Reply for READ request + * @arg for this ioctl is the @id field of READ request. + */ +#define CACHEFILES_IOC_READ_COMPLETE _IOW(0x98, 1, int) + +#endif diff --git a/linux-headers/include/linux/can.h b/linux-headers/include/linux/can.h index 55b66607cad..23d5bf4a561 100644 --- a/linux-headers/include/linux/can.h +++ b/linux-headers/include/linux/can.h @@ -48,6 +48,7 @@ #include #include +#include /* for offsetof */ /* controller area network (CAN) kernel definitions */ @@ -60,6 +61,7 @@ #define CAN_SFF_MASK 0x000007FFU /* standard frame format (SFF) */ #define CAN_EFF_MASK 0x1FFFFFFFU /* extended frame format (EFF) */ #define CAN_ERR_MASK 0x1FFFFFFFU /* omit EFF, RTR, ERR flags */ +#define CANXL_PRIO_MASK CAN_SFF_MASK /* 11 bit priority mask */ /* * Controller Area Network Identifier structure @@ -73,6 +75,7 @@ typedef __u32 canid_t; #define CAN_SFF_ID_BITS 11 #define CAN_EFF_ID_BITS 29 +#define CANXL_PRIO_BITS CAN_SFF_ID_BITS /* * Controller Area Network Error Message Frame Mask structure @@ -84,37 +87,57 @@ typedef __u32 can_err_mask_t; /* CAN payload length and DLC definitions according to ISO 11898-1 */ #define CAN_MAX_DLC 8 +#define CAN_MAX_RAW_DLC 15 #define CAN_MAX_DLEN 8 /* CAN FD payload length and DLC definitions according to ISO 11898-7 */ #define CANFD_MAX_DLC 15 #define CANFD_MAX_DLEN 64 +/* + * CAN XL payload length and DLC definitions according to ISO 11898-1 + * CAN XL DLC ranges from 0 .. 2047 => data length from 1 .. 2048 byte + */ +#define CANXL_MIN_DLC 0 +#define CANXL_MAX_DLC 2047 +#define CANXL_MAX_DLC_MASK 0x07FF +#define CANXL_MIN_DLEN 1 +#define CANXL_MAX_DLEN 2048 + /** - * struct can_frame - basic CAN frame structure - * @can_id: CAN ID of the frame and CAN_*_FLAG flags, see canid_t definition - * @can_dlc: frame payload length in byte (0 .. 8) aka data length code - * N.B. the DLC field from ISO 11898-1 Chapter 8.4.2.3 has a 1:1 - * mapping of the 'data length code' to the real payload length - * @__pad: padding - * @__res0: reserved / padding - * @__res1: reserved / padding - * @data: CAN frame payload (up to 8 byte) + * struct can_frame - Classical CAN frame structure (aka CAN 2.0B) + * @can_id: CAN ID of the frame and CAN_*_FLAG flags, see canid_t definition + * @len: CAN frame payload length in byte (0 .. 8) + * @can_dlc: deprecated name for CAN frame payload length in byte (0 .. 8) + * @__pad: padding + * @__res0: reserved / padding + * @len8_dlc: optional DLC value (9 .. 15) at 8 byte payload length + * len8_dlc contains values from 9 .. 15 when the payload length is + * 8 bytes but the DLC value (see ISO 11898-1) is greater then 8. + * CAN_CTRLMODE_CC_LEN8_DLC flag has to be enabled in CAN driver. + * @data: CAN frame payload (up to 8 byte) */ struct can_frame { canid_t can_id; /* 32 bit CAN_ID + EFF/RTR/ERR flags */ - __u8 can_dlc; /* frame payload length in byte (0 .. CAN_MAX_DLEN) */ - __u8 __pad; /* padding */ - __u8 __res0; /* reserved / padding */ - __u8 __res1; /* reserved / padding */ - __u8 data[CAN_MAX_DLEN] __attribute__((aligned(8))); + union { + /* CAN frame payload length in byte (0 .. CAN_MAX_DLEN) + * was previously named can_dlc so we need to carry that + * name for legacy support + */ + __u8 len; + __u8 can_dlc; /* deprecated */ + } __attribute__((packed)); /* disable padding added in some ABIs */ + __u8 __pad; /* padding */ + __u8 __res0; /* reserved / padding */ + __u8 len8_dlc; /* optional DLC for 8 byte payload length (9 .. 15) */ + __u8 data[CAN_MAX_DLEN] __attribute__((aligned(8))); }; /* * defined bits for canfd_frame.flags * - * The use of struct canfd_frame implies the Extended Data Length (EDL) bit to - * be set in the CAN frame bitstream on the wire. The EDL bit switch turns + * The use of struct canfd_frame implies the FD Frame (FDF) bit to + * be set in the CAN frame bitstream on the wire. The FDF bit switch turns * the CAN controllers bitstream processor into the CAN FD mode which creates * two new options within the CAN FD frame specification: * @@ -125,9 +148,18 @@ struct can_frame { * controller only the CANFD_BRS bit is relevant for real CAN controllers when * building a CAN FD frame for transmission. Setting the CANFD_ESI bit can make * sense for virtual CAN interfaces to test applications with echoed frames. + * + * The struct can_frame and struct canfd_frame intentionally share the same + * layout to be able to write CAN frame content into a CAN FD frame structure. + * When this is done the former differentiation via CAN_MTU / CANFD_MTU gets + * lost. CANFD_FDF allows programmers to mark CAN FD frames in the case of + * using struct canfd_frame for mixed CAN / CAN FD content (dual use). + * Since the introduction of CAN XL the CANFD_FDF flag is set in all CAN FD + * frame structures provided by the CAN subsystem of the Linux kernel. */ #define CANFD_BRS 0x01 /* bit rate switch (second bitrate for payload data) */ #define CANFD_ESI 0x02 /* error state indicator of the transmitting node */ +#define CANFD_FDF 0x04 /* mark CAN FD for dual use of struct canfd_frame */ /** * struct canfd_frame - CAN flexible data rate frame structure @@ -147,8 +179,46 @@ struct canfd_frame { __u8 data[CANFD_MAX_DLEN] __attribute__((aligned(8))); }; +/* + * defined bits for canxl_frame.flags + * + * The canxl_frame.flags element contains two bits CANXL_XLF and CANXL_SEC + * and shares the relative position of the struct can[fd]_frame.len element. + * The CANXL_XLF bit ALWAYS needs to be set to indicate a valid CAN XL frame. + * As a side effect setting this bit intentionally breaks the length checks + * for Classical CAN and CAN FD frames. + * + * Undefined bits in canxl_frame.flags are reserved and shall be set to zero. + */ +#define CANXL_XLF 0x80 /* mandatory CAN XL frame flag (must always be set!) */ +#define CANXL_SEC 0x01 /* Simple Extended Content (security/segmentation) */ + +/** + * struct canxl_frame - CAN with e'X'tended frame 'L'ength frame structure + * @prio: 11 bit arbitration priority with zero'ed CAN_*_FLAG flags + * @flags: additional flags for CAN XL + * @sdt: SDU (service data unit) type + * @len: frame payload length in byte (CANXL_MIN_DLEN .. CANXL_MAX_DLEN) + * @af: acceptance field + * @data: CAN XL frame payload (CANXL_MIN_DLEN .. CANXL_MAX_DLEN byte) + * + * @prio shares the same position as @can_id from struct can[fd]_frame. + */ +struct canxl_frame { + canid_t prio; /* 11 bit priority for arbitration (canid_t) */ + __u8 flags; /* additional flags for CAN XL */ + __u8 sdt; /* SDU (service data unit) type */ + __u16 len; /* frame payload length in byte */ + __u32 af; /* acceptance field */ + __u8 data[CANXL_MAX_DLEN]; +}; + #define CAN_MTU (sizeof(struct can_frame)) #define CANFD_MTU (sizeof(struct canfd_frame)) +#define CANXL_MTU (sizeof(struct canxl_frame)) +#define CANXL_HDR_SIZE (offsetof(struct canxl_frame, data)) +#define CANXL_MIN_MTU (CANXL_HDR_SIZE + 64) +#define CANXL_MAX_MTU CANXL_MTU /* particular protocols of the protocol family PF_CAN */ #define CAN_RAW 1 /* RAW sockets */ @@ -215,6 +285,5 @@ struct can_filter { }; #define CAN_INV_FILTER 0x20000000U /* to be set in can_filter.can_id */ -#define CAN_RAW_FILTER_MAX 512 /* maximum number of can_filter set via setsockopt() */ #endif /* !_UAPI_CAN_H */ diff --git a/linux-headers/include/linux/can/bcm.h b/linux-headers/include/linux/can/bcm.h index 009ffd157c1..ccd6985b779 100644 --- a/linux-headers/include/linux/can/bcm.h +++ b/linux-headers/include/linux/can/bcm.h @@ -71,7 +71,7 @@ struct bcm_msg_head { struct bcm_timeval ival1, ival2; canid_t can_id; __u32 nframes; - struct can_frame frames[0]; + struct can_frame frames[]; }; enum { diff --git a/linux-headers/include/linux/can/error.h b/linux-headers/include/linux/can/error.h index a350466f978..f938620dd4d 100644 --- a/linux-headers/include/linux/can/error.h +++ b/linux-headers/include/linux/can/error.h @@ -57,6 +57,8 @@ #define CAN_ERR_BUSOFF 0x00000040U /* bus off */ #define CAN_ERR_BUSERROR 0x00000080U /* bus error (may flood!) */ #define CAN_ERR_RESTARTED 0x00000100U /* controller restarted */ +#define CAN_ERR_CNT 0x00000200U /* TX error counter / data[6] */ + /* RX error counter / data[7] */ /* arbitration lost in bit ... / data[0] */ #define CAN_ERR_LOSTARB_UNSPEC 0x00 /* unspecified */ @@ -120,6 +122,22 @@ #define CAN_ERR_TRX_CANL_SHORT_TO_GND 0x70 /* 0111 0000 */ #define CAN_ERR_TRX_CANL_SHORT_TO_CANH 0x80 /* 1000 0000 */ -/* controller specific additional information / data[5..7] */ +/* data[5] is reserved (do not use) */ + +/* TX error counter / data[6] */ +/* RX error counter / data[7] */ + +/* CAN state thresholds + * + * Error counter Error state + * ----------------------------------- + * 0 - 95 Error-active + * 96 - 127 Error-warning + * 128 - 255 Error-passive + * 256 and greater Bus-off + */ +#define CAN_ERROR_WARNING_THRESHOLD 96 +#define CAN_ERROR_PASSIVE_THRESHOLD 128 +#define CAN_BUS_OFF_THRESHOLD 256 #endif /* _CAN_ERROR_H */ diff --git a/linux-headers/include/linux/can/gw.h b/linux-headers/include/linux/can/gw.h index 3ff218ad845..1677273d2e1 100644 --- a/linux-headers/include/linux/can/gw.h +++ b/linux-headers/include/linux/can/gw.h @@ -98,8 +98,8 @@ enum { /* CAN frame elements that are affected by curr. 3 CAN frame modifications */ #define CGW_MOD_ID 0x01 -#define CGW_MOD_DLC 0x02 /* contains the data length in bytes */ -#define CGW_MOD_LEN CGW_MOD_DLC /* CAN FD length representation */ +#define CGW_MOD_DLC 0x02 /* Classical CAN data length code */ +#define CGW_MOD_LEN CGW_MOD_DLC /* CAN FD (plain) data length */ #define CGW_MOD_DATA 0x04 #define CGW_MOD_FLAGS 0x08 /* CAN FD flags */ diff --git a/linux-headers/include/linux/can/isotp.h b/linux-headers/include/linux/can/isotp.h index af4b9d7c37a..b24f8a4f109 100644 --- a/linux-headers/include/linux/can/isotp.h +++ b/linux-headers/include/linux/can/isotp.h @@ -124,33 +124,30 @@ struct can_isotp_ll_options { /* flags for isotp behaviour */ -#define CAN_ISOTP_LISTEN_MODE 0x001 /* listen only (do not send FC) */ -#define CAN_ISOTP_EXTEND_ADDR 0x002 /* enable extended addressing */ -#define CAN_ISOTP_TX_PADDING 0x004 /* enable CAN frame padding tx path */ -#define CAN_ISOTP_RX_PADDING 0x008 /* enable CAN frame padding rx path */ -#define CAN_ISOTP_CHK_PAD_LEN 0x010 /* check received CAN frame padding */ -#define CAN_ISOTP_CHK_PAD_DATA 0x020 /* check received CAN frame padding */ -#define CAN_ISOTP_HALF_DUPLEX 0x040 /* half duplex error state handling */ -#define CAN_ISOTP_FORCE_TXSTMIN 0x080 /* ignore stmin from received FC */ -#define CAN_ISOTP_FORCE_RXSTMIN 0x100 /* ignore CFs depending on rx stmin */ -#define CAN_ISOTP_RX_EXT_ADDR 0x200 /* different rx extended addressing */ -#define CAN_ISOTP_WAIT_TX_DONE 0x400 /* wait for tx completion */ - - -/* default values */ +#define CAN_ISOTP_LISTEN_MODE 0x0001 /* listen only (do not send FC) */ +#define CAN_ISOTP_EXTEND_ADDR 0x0002 /* enable extended addressing */ +#define CAN_ISOTP_TX_PADDING 0x0004 /* enable CAN frame padding tx path */ +#define CAN_ISOTP_RX_PADDING 0x0008 /* enable CAN frame padding rx path */ +#define CAN_ISOTP_CHK_PAD_LEN 0x0010 /* check received CAN frame padding */ +#define CAN_ISOTP_CHK_PAD_DATA 0x0020 /* check received CAN frame padding */ +#define CAN_ISOTP_HALF_DUPLEX 0x0040 /* half duplex error state handling */ +#define CAN_ISOTP_FORCE_TXSTMIN 0x0080 /* ignore stmin from received FC */ +#define CAN_ISOTP_FORCE_RXSTMIN 0x0100 /* ignore CFs depending on rx stmin */ +#define CAN_ISOTP_RX_EXT_ADDR 0x0200 /* different rx extended addressing */ +#define CAN_ISOTP_WAIT_TX_DONE 0x0400 /* wait for tx completion */ +#define CAN_ISOTP_SF_BROADCAST 0x0800 /* 1-to-N functional addressing */ +#define CAN_ISOTP_CF_BROADCAST 0x1000 /* 1-to-N transmission w/o FC */ + +/* protocol machine default values */ #define CAN_ISOTP_DEFAULT_FLAGS 0 #define CAN_ISOTP_DEFAULT_EXT_ADDRESS 0x00 #define CAN_ISOTP_DEFAULT_PAD_CONTENT 0xCC /* prevent bit-stuffing */ -#define CAN_ISOTP_DEFAULT_FRAME_TXTIME 0 +#define CAN_ISOTP_DEFAULT_FRAME_TXTIME 50000 /* 50 micro seconds */ #define CAN_ISOTP_DEFAULT_RECV_BS 0 #define CAN_ISOTP_DEFAULT_RECV_STMIN 0x00 #define CAN_ISOTP_DEFAULT_RECV_WFTMAX 0 -#define CAN_ISOTP_DEFAULT_LL_MTU CAN_MTU -#define CAN_ISOTP_DEFAULT_LL_TX_DL CAN_MAX_DLEN -#define CAN_ISOTP_DEFAULT_LL_TX_FLAGS 0 - /* * Remark on CAN_ISOTP_DEFAULT_RECV_* values: * @@ -162,4 +159,24 @@ struct can_isotp_ll_options { * consistency and copied directly into the flow control (FC) frame. */ +/* link layer default values => make use of Classical CAN frames */ + +#define CAN_ISOTP_DEFAULT_LL_MTU CAN_MTU +#define CAN_ISOTP_DEFAULT_LL_TX_DL CAN_MAX_DLEN +#define CAN_ISOTP_DEFAULT_LL_TX_FLAGS 0 + +/* + * The CAN_ISOTP_DEFAULT_FRAME_TXTIME has become a non-zero value as + * it only makes sense for isotp implementation tests to run without + * a N_As value. As user space applications usually do not set the + * frame_txtime element of struct can_isotp_options the new in-kernel + * default is very likely overwritten with zero when the sockopt() + * CAN_ISOTP_OPTS is invoked. + * To make sure that a N_As value of zero is only set intentional the + * value '0' is now interpreted as 'do not change the current value'. + * When a frame_txtime of zero is required for testing purposes this + * CAN_ISOTP_FRAME_TXTIME_ZERO u32 value has to be set in frame_txtime. + */ +#define CAN_ISOTP_FRAME_TXTIME_ZERO 0xFFFFFFFF + #endif /* !_UAPI_CAN_ISOTP_H */ diff --git a/linux-headers/include/linux/can/j1939.h b/linux-headers/include/linux/can/j1939.h index bab3b97cf3e..df7bec8cd7d 100644 --- a/linux-headers/include/linux/can/j1939.h +++ b/linux-headers/include/linux/can/j1939.h @@ -78,11 +78,20 @@ enum { enum { J1939_NLA_PAD, J1939_NLA_BYTES_ACKED, + J1939_NLA_TOTAL_SIZE, + J1939_NLA_PGN, + J1939_NLA_SRC_NAME, + J1939_NLA_DEST_NAME, + J1939_NLA_SRC_ADDR, + J1939_NLA_DEST_ADDR, }; enum { J1939_EE_INFO_NONE, J1939_EE_INFO_TX_ABORT, + J1939_EE_INFO_RX_RTS, + J1939_EE_INFO_RX_DPO, + J1939_EE_INFO_RX_ABORT, }; struct j1939_filter { diff --git a/linux-headers/include/linux/can/netlink.h b/linux-headers/include/linux/can/netlink.h index 7159dc67c2e..8ec98c21eae 100644 --- a/linux-headers/include/linux/can/netlink.h +++ b/linux-headers/include/linux/can/netlink.h @@ -100,6 +100,9 @@ struct can_ctrlmode { #define CAN_CTRLMODE_FD 0x20 /* CAN FD mode */ #define CAN_CTRLMODE_PRESUME_ACK 0x40 /* Ignore missing CAN ACKs */ #define CAN_CTRLMODE_FD_NON_ISO 0x80 /* CAN FD in non-ISO mode */ +#define CAN_CTRLMODE_CC_LEN8_DLC 0x100 /* Classic CAN DLC option */ +#define CAN_CTRLMODE_TDC_AUTO 0x200 /* CAN transiver automatically calculates TDCV */ +#define CAN_CTRLMODE_TDC_MANUAL 0x400 /* TDCV is manually set up by user */ /* * CAN device statistics @@ -133,10 +136,48 @@ enum { IFLA_CAN_BITRATE_CONST, IFLA_CAN_DATA_BITRATE_CONST, IFLA_CAN_BITRATE_MAX, - __IFLA_CAN_MAX + IFLA_CAN_TDC, + IFLA_CAN_CTRLMODE_EXT, + + /* add new constants above here */ + __IFLA_CAN_MAX, + IFLA_CAN_MAX = __IFLA_CAN_MAX - 1 }; -#define IFLA_CAN_MAX (__IFLA_CAN_MAX - 1) +/* + * CAN FD Transmitter Delay Compensation (TDC) + * + * Please refer to struct can_tdc_const and can_tdc in + * include/linux/can/bittiming.h for further details. + */ +enum { + IFLA_CAN_TDC_UNSPEC, + IFLA_CAN_TDC_TDCV_MIN, /* u32 */ + IFLA_CAN_TDC_TDCV_MAX, /* u32 */ + IFLA_CAN_TDC_TDCO_MIN, /* u32 */ + IFLA_CAN_TDC_TDCO_MAX, /* u32 */ + IFLA_CAN_TDC_TDCF_MIN, /* u32 */ + IFLA_CAN_TDC_TDCF_MAX, /* u32 */ + IFLA_CAN_TDC_TDCV, /* u32 */ + IFLA_CAN_TDC_TDCO, /* u32 */ + IFLA_CAN_TDC_TDCF, /* u32 */ + + /* add new constants above here */ + __IFLA_CAN_TDC, + IFLA_CAN_TDC_MAX = __IFLA_CAN_TDC - 1 +}; + +/* + * IFLA_CAN_CTRLMODE_EXT nest: controller mode extended parameters + */ +enum { + IFLA_CAN_CTRLMODE_UNSPEC, + IFLA_CAN_CTRLMODE_SUPPORTED, /* u32 */ + + /* add new constants above here */ + __IFLA_CAN_CTRLMODE, + IFLA_CAN_CTRLMODE_MAX = __IFLA_CAN_CTRLMODE - 1 +}; /* u16 termination range: 1..65535 Ohms */ #define CAN_TERMINATION_DISABLED 0 diff --git a/linux-headers/include/linux/can/raw.h b/linux-headers/include/linux/can/raw.h index c8d795514dc..54f21fab3fc 100644 --- a/linux-headers/include/linux/can/raw.h +++ b/linux-headers/include/linux/can/raw.h @@ -49,6 +49,8 @@ #include #define SOL_CAN_RAW (SOL_CAN_BASE + CAN_RAW) +#define CAN_RAW_FILTER_MAX 512 /* maximum number of can_filter set via setsockopt() */ + enum { SCM_CAN_RAW_ERRQUEUE = 1, }; @@ -62,6 +64,7 @@ enum { CAN_RAW_RECV_OWN_MSGS, /* receive my own msgs (default:off) */ CAN_RAW_FD_FRAMES, /* allow CAN FD frames (default:off) */ CAN_RAW_JOIN_FILTERS, /* all filters must match to trigger */ + CAN_RAW_XL_FRAMES, /* allow CAN XL frames (default:off) */ }; #endif /* !_UAPI_CAN_RAW_H */ diff --git a/linux-headers/include/linux/capability.h b/linux-headers/include/linux/capability.h index cc48bec4c57..e48f039ec0e 100644 --- a/linux-headers/include/linux/capability.h +++ b/linux-headers/include/linux/capability.h @@ -41,11 +41,12 @@ typedef struct __user_cap_header_struct { int pid; } *cap_user_header_t; -typedef struct __user_cap_data_struct { +struct __user_cap_data_struct { __u32 effective; __u32 permitted; __u32 inheritable; -} *cap_user_data_t; +}; +typedef struct __user_cap_data_struct *cap_user_data_t; #define VFS_CAP_REVISION_MASK 0xFF000000 @@ -241,7 +242,6 @@ struct vfs_ns_cap_data { /* Allow examination and configuration of disk quotas */ /* Allow setting the domainname */ /* Allow setting the hostname */ -/* Allow calling bdflush() */ /* Allow mount() and umount(), setting up new smb connection */ /* Allow some autofs root ioctls */ /* Allow nfsservctl */ @@ -333,7 +333,8 @@ struct vfs_ns_cap_data { #define CAP_AUDIT_CONTROL 30 -/* Set or remove capabilities on files */ +/* Set or remove capabilities on files. + Map uid=0 into a child user namespace. */ #define CAP_SETFCAP 31 @@ -424,7 +425,7 @@ struct vfs_ns_cap_data { */ #define CAP_TO_INDEX(x) ((x) >> 5) /* 1 << 5 == bits in __u32 */ -#define CAP_TO_MASK(x) (1 << ((x) & 31)) /* mask for indexed __u32 */ +#define CAP_TO_MASK(x) (1U << ((x) & 31)) /* mask for indexed __u32 */ #endif /* _LINUX_CAPABILITY_H */ diff --git a/linux-headers/include/linux/ccs.h b/linux-headers/include/linux/ccs.h new file mode 100644 index 00000000000..2896d3bfdb5 --- /dev/null +++ b/linux-headers/include/linux/ccs.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ +/* Copyright (C) 2020 Intel Corporation */ + +#ifndef __UAPI_CCS_H__ +#define __UAPI_CCS_H__ + +#include + +#define V4L2_CID_CCS_ANALOGUE_GAIN_M0 (V4L2_CID_USER_CCS_BASE + 1) +#define V4L2_CID_CCS_ANALOGUE_GAIN_C0 (V4L2_CID_USER_CCS_BASE + 2) +#define V4L2_CID_CCS_ANALOGUE_GAIN_M1 (V4L2_CID_USER_CCS_BASE + 3) +#define V4L2_CID_CCS_ANALOGUE_GAIN_C1 (V4L2_CID_USER_CCS_BASE + 4) +#define V4L2_CID_CCS_ANALOGUE_LINEAR_GAIN (V4L2_CID_USER_CCS_BASE + 5) +#define V4L2_CID_CCS_ANALOGUE_EXPONENTIAL_GAIN (V4L2_CID_USER_CCS_BASE + 6) +#define V4L2_CID_CCS_SHADING_CORRECTION (V4L2_CID_USER_CCS_BASE + 8) +#define V4L2_CID_CCS_LUMINANCE_CORRECTION_LEVEL (V4L2_CID_USER_CCS_BASE + 9) + +#endif diff --git a/linux-headers/include/linux/cdrom.h b/linux-headers/include/linux/cdrom.h index c04fd9c7de5..7332c128e7c 100644 --- a/linux-headers/include/linux/cdrom.h +++ b/linux-headers/include/linux/cdrom.h @@ -103,7 +103,7 @@ #define CDROMREADALL 0x5318 /* read all 2646 bytes */ /* - * These ioctls are (now) only in ide-cd.c for controlling + * These ioctls were only in (now removed) ide-cd.c for controlling * drive spindown time. They should be implemented in the * Uniform driver, via generic packet commands, GPCMD_MODE_SELECT_10, * GPCMD_MODE_SENSE_10 and the GPMODE_POWER_PAGE... @@ -147,6 +147,8 @@ #define CDROM_NEXT_WRITABLE 0x5394 /* get next writable block */ #define CDROM_LAST_WRITTEN 0x5395 /* get last block written on disc */ +#define CDROM_TIMED_MEDIA_CHANGE 0x5396 /* get the timestamp of the last media change */ + /******************************************************* * CDROM IOCTL structures *******************************************************/ @@ -295,6 +297,23 @@ struct cdrom_generic_command }; }; +/* This struct is used by CDROM_TIMED_MEDIA_CHANGE */ +struct cdrom_timed_media_change_info { + __s64 last_media_change; /* Timestamp of the last detected media + * change in ms. May be set by caller, + * updated upon successful return of + * ioctl. + */ + __u64 media_flags; /* Flags returned by ioctl to indicate + * media status. + */ +}; +#define MEDIA_CHANGED_FLAG 0x1 /* Last detected media change was more + * recent than last_media_change set by + * caller. + */ +/* other bits of media_flags available for future use */ + /* * A CD-ROM physical sector size is 2048, 2052, 2056, 2324, 2332, 2336, * 2340, or 2352 bytes long. diff --git a/linux-headers/include/linux/cec-funcs.h b/linux-headers/include/linux/cec-funcs.h index 9932239b7f4..b0fe9b2e6f8 100644 --- a/linux-headers/include/linux/cec-funcs.h +++ b/linux-headers/include/linux/cec-funcs.h @@ -1568,6 +1568,20 @@ static __inline__ void cec_ops_request_short_audio_descriptor(const struct cec_m } } +static __inline__ void cec_msg_set_audio_volume_level(struct cec_msg *msg, + __u8 audio_volume_level) +{ + msg->len = 3; + msg->msg[1] = CEC_MSG_SET_AUDIO_VOLUME_LEVEL; + msg->msg[2] = audio_volume_level; +} + +static __inline__ void cec_ops_set_audio_volume_level(const struct cec_msg *msg, + __u8 *audio_volume_level) +{ + *audio_volume_level = msg->msg[2]; +} + /* Audio Rate Control Feature */ static __inline__ void cec_msg_set_audio_rate(struct cec_msg *msg, @@ -1665,7 +1679,7 @@ static __inline__ void cec_ops_report_current_latency(const struct cec_msg *msg, if (*audio_out_compensated == 3 && msg->len >= 7) *audio_out_delay = msg->msg[6]; else - *audio_out_delay = 0; + *audio_out_delay = 1; } static __inline__ void cec_msg_request_current_latency(struct cec_msg *msg, diff --git a/linux-headers/include/linux/cec.h b/linux-headers/include/linux/cec.h index 16d96133f22..9ebbec29981 100644 --- a/linux-headers/include/linux/cec.h +++ b/linux-headers/include/linux/cec.h @@ -142,6 +142,26 @@ static __inline__ void cec_msg_set_reply_to(struct cec_msg *msg, msg->reply = msg->timeout = 0; } +/** + * cec_msg_recv_is_tx_result - return true if this message contains the + * result of an earlier non-blocking transmit + * @msg: the message structure from CEC_RECEIVE + */ +static __inline__ int cec_msg_recv_is_tx_result(const struct cec_msg *msg) +{ + return msg->sequence && msg->tx_status && !msg->rx_status; +} + +/** + * cec_msg_recv_is_rx_result - return true if this message contains the + * reply of an earlier non-blocking transmit + * @msg: the message structure from CEC_RECEIVE + */ +static __inline__ int cec_msg_recv_is_rx_result(const struct cec_msg *msg) +{ + return msg->sequence && !msg->tx_status && msg->rx_status; +} + /* cec_msg flags field */ #define CEC_MSG_FL_REPLY_TO_FOLLOWERS (1 << 0) #define CEC_MSG_FL_RAW (1 << 1) @@ -396,6 +416,7 @@ struct cec_drm_connector_info { * associated with the CEC adapter. * @type: connector type (if any) * @drm: drm connector info + * @raw: array to pad the union */ struct cec_connector_info { __u32 type; @@ -453,7 +474,7 @@ struct cec_event_lost_msgs { * struct cec_event - CEC event structure * @ts: the timestamp of when the event was sent. * @event: the event. - * array. + * @flags: event flags. * @state_change: the event payload for CEC_EVENT_STATE_CHANGE. * @lost_msgs: the event payload for CEC_EVENT_LOST_MSGS. * @raw: array to pad the union. @@ -641,7 +662,7 @@ struct cec_event { #define CEC_OP_REC_SEQ_WEDNESDAY 0x08 #define CEC_OP_REC_SEQ_THURSDAY 0x10 #define CEC_OP_REC_SEQ_FRIDAY 0x20 -#define CEC_OP_REC_SEQ_SATERDAY 0x40 +#define CEC_OP_REC_SEQ_SATURDAY 0x40 #define CEC_OP_REC_SEQ_ONCE_ONLY 0x00 #define CEC_MSG_CLEAR_DIGITAL_TIMER 0x99 @@ -747,6 +768,7 @@ struct cec_event { #define CEC_OP_FEAT_DEV_HAS_SET_AUDIO_RATE 0x08 #define CEC_OP_FEAT_DEV_SINK_HAS_ARC_TX 0x04 #define CEC_OP_FEAT_DEV_SOURCE_HAS_ARC_RX 0x02 +#define CEC_OP_FEAT_DEV_HAS_SET_AUDIO_VOLUME_LEVEL 0x01 #define CEC_MSG_GIVE_FEATURES 0xa5 /* HDMI 2.0 */ @@ -1038,6 +1060,7 @@ struct cec_event { #define CEC_OP_AUD_FMT_ID_CEA861 0 #define CEC_OP_AUD_FMT_ID_CEA861_CXT 1 +#define CEC_MSG_SET_AUDIO_VOLUME_LEVEL 0x73 /* Audio Rate Control Feature */ #define CEC_MSG_SET_AUDIO_RATE 0x9a diff --git a/linux-headers/include/linux/cfm_bridge.h b/linux-headers/include/linux/cfm_bridge.h new file mode 100644 index 00000000000..88e5890d43c --- /dev/null +++ b/linux-headers/include/linux/cfm_bridge.h @@ -0,0 +1,64 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ + +#ifndef _LINUX_CFM_BRIDGE_H_ +#define _LINUX_CFM_BRIDGE_H_ + +#include +#include + +#define ETHER_HEADER_LENGTH (6+6+4+2) +#define CFM_MAID_LENGTH 48 +#define CFM_CCM_PDU_LENGTH 75 +#define CFM_PORT_STATUS_TLV_LENGTH 4 +#define CFM_IF_STATUS_TLV_LENGTH 4 +#define CFM_IF_STATUS_TLV_TYPE 4 +#define CFM_PORT_STATUS_TLV_TYPE 2 +#define CFM_ENDE_TLV_TYPE 0 +#define CFM_CCM_MAX_FRAME_LENGTH (ETHER_HEADER_LENGTH+\ + CFM_CCM_PDU_LENGTH+\ + CFM_PORT_STATUS_TLV_LENGTH+\ + CFM_IF_STATUS_TLV_LENGTH) +#define CFM_FRAME_PRIO 7 +#define CFM_CCM_TLV_OFFSET 70 +#define CFM_CCM_PDU_MAID_OFFSET 10 +#define CFM_CCM_PDU_MEPID_OFFSET 8 +#define CFM_CCM_PDU_SEQNR_OFFSET 4 +#define CFM_CCM_PDU_TLV_OFFSET 74 +#define CFM_CCM_ITU_RESERVED_SIZE 16 + +struct br_cfm_common_hdr { + __u8 mdlevel_version; + __u8 opcode; + __u8 flags; + __u8 tlv_offset; +}; + +enum br_cfm_opcodes { + BR_CFM_OPCODE_CCM = 0x1, +}; + +/* MEP domain */ +enum br_cfm_domain { + BR_CFM_PORT, + BR_CFM_VLAN, +}; + +/* MEP direction */ +enum br_cfm_mep_direction { + BR_CFM_MEP_DIRECTION_DOWN, + BR_CFM_MEP_DIRECTION_UP, +}; + +/* CCM interval supported. */ +enum br_cfm_ccm_interval { + BR_CFM_CCM_INTERVAL_NONE, + BR_CFM_CCM_INTERVAL_3_3_MS, + BR_CFM_CCM_INTERVAL_10_MS, + BR_CFM_CCM_INTERVAL_100_MS, + BR_CFM_CCM_INTERVAL_1_SEC, + BR_CFM_CCM_INTERVAL_10_SEC, + BR_CFM_CCM_INTERVAL_1_MIN, + BR_CFM_CCM_INTERVAL_10_MIN, +}; + +#endif diff --git a/linux-headers/include/linux/cgroupstats.h b/linux-headers/include/linux/cgroupstats.h index aa306e4cd6c..80b2c859448 100644 --- a/linux-headers/include/linux/cgroupstats.h +++ b/linux-headers/include/linux/cgroupstats.h @@ -24,8 +24,6 @@ * basis. This data is shared using taskstats. * * Most of these states are derived by looking at the task->state value - * For the nr_io_wait state, a flag in the delay accounting structure - * indicates that the task is waiting on IO * * Each member is aligned to a 8 byte boundary. */ diff --git a/linux-headers/include/linux/cifs/cifs_mount.h b/linux-headers/include/linux/cifs/cifs_mount.h index 69829205fdb..8e87d27b095 100644 --- a/linux-headers/include/linux/cifs/cifs_mount.h +++ b/linux-headers/include/linux/cifs/cifs_mount.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: LGPL-2.1+ WITH Linux-syscall-note */ /* - * include/uapi/linux/cifs/cifs_mount.h * * Author(s): Scott Lovenberg (scott.lovenberg@gmail.com) * diff --git a/linux-headers/include/linux/cifs/cifs_netlink.h b/linux-headers/include/linux/cifs/cifs_netlink.h new file mode 100644 index 00000000000..9c9cab484ed --- /dev/null +++ b/linux-headers/include/linux/cifs/cifs_netlink.h @@ -0,0 +1,63 @@ +/* SPDX-License-Identifier: LGPL-2.1+ WITH Linux-syscall-note */ +/* + * Netlink routines for CIFS + * + * Copyright (c) 2020 Samuel Cabrero + */ + + +#ifndef LINUX_CIFS_NETLINK_H +#define LINUX_CIFS_NETLINK_H + +#define CIFS_GENL_NAME "cifs" +#define CIFS_GENL_VERSION 0x1 + +#define CIFS_GENL_MCGRP_SWN_NAME "cifs_mcgrp_swn" + +enum cifs_genl_multicast_groups { + CIFS_GENL_MCGRP_SWN, +}; + +enum cifs_genl_attributes { + CIFS_GENL_ATTR_UNSPEC, + CIFS_GENL_ATTR_SWN_REGISTRATION_ID, + CIFS_GENL_ATTR_SWN_NET_NAME, + CIFS_GENL_ATTR_SWN_SHARE_NAME, + CIFS_GENL_ATTR_SWN_IP, + CIFS_GENL_ATTR_SWN_NET_NAME_NOTIFY, + CIFS_GENL_ATTR_SWN_SHARE_NAME_NOTIFY, + CIFS_GENL_ATTR_SWN_IP_NOTIFY, + CIFS_GENL_ATTR_SWN_KRB_AUTH, + CIFS_GENL_ATTR_SWN_USER_NAME, + CIFS_GENL_ATTR_SWN_PASSWORD, + CIFS_GENL_ATTR_SWN_DOMAIN_NAME, + CIFS_GENL_ATTR_SWN_NOTIFICATION_TYPE, + CIFS_GENL_ATTR_SWN_RESOURCE_STATE, + CIFS_GENL_ATTR_SWN_RESOURCE_NAME, + __CIFS_GENL_ATTR_MAX, +}; +#define CIFS_GENL_ATTR_MAX (__CIFS_GENL_ATTR_MAX - 1) + +enum cifs_genl_commands { + CIFS_GENL_CMD_UNSPEC, + CIFS_GENL_CMD_SWN_REGISTER, + CIFS_GENL_CMD_SWN_UNREGISTER, + CIFS_GENL_CMD_SWN_NOTIFY, + __CIFS_GENL_CMD_MAX +}; +#define CIFS_GENL_CMD_MAX (__CIFS_GENL_CMD_MAX - 1) + +enum cifs_swn_notification_type { + CIFS_SWN_NOTIFICATION_RESOURCE_CHANGE = 0x01, + CIFS_SWN_NOTIFICATION_CLIENT_MOVE = 0x02, + CIFS_SWN_NOTIFICATION_SHARE_MOVE = 0x03, + CIFS_SWN_NOTIFICATION_IP_CHANGE = 0x04, +}; + +enum cifs_swn_resource_state { + CIFS_SWN_RESOURCE_STATE_UNKNOWN = 0x00, + CIFS_SWN_RESOURCE_STATE_AVAILABLE = 0x01, + CIFS_SWN_RESOURCE_STATE_UNAVAILABLE = 0xFF +}; + +#endif /* LINUX_CIFS_NETLINK_H */ diff --git a/linux-headers/include/linux/close_range.h b/linux-headers/include/linux/close_range.h index 312328b6b58..af78ebfec7d 100644 --- a/linux-headers/include/linux/close_range.h +++ b/linux-headers/include/linux/close_range.h @@ -5,5 +5,8 @@ /* Unshare the file descriptor table before closing file descriptors. */ #define CLOSE_RANGE_UNSHARE (1U << 1) +/* Set the FD_CLOEXEC bit instead of closing the file descriptor. */ +#define CLOSE_RANGE_CLOEXEC (1U << 2) + #endif /* _LINUX_CLOSE_RANGE_H */ diff --git a/linux-headers/include/linux/cm4000_cs.h b/linux-headers/include/linux/cm4000_cs.h deleted file mode 100644 index f2b6518d7f3..00000000000 --- a/linux-headers/include/linux/cm4000_cs.h +++ /dev/null @@ -1,64 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _CM4000_H_ -#define _CM4000_H_ - -#include -#include - -#define MAX_ATR 33 - -#define CM4000_MAX_DEV 4 - -/* those two structures are passed via ioctl() from/to userspace. They are - * used by existing userspace programs, so I kepth the awkward "bIFSD" naming - * not to break compilation of userspace apps. -HW */ - -typedef struct atreq { - __s32 atr_len; - unsigned char atr[64]; - __s32 power_act; - unsigned char bIFSD; - unsigned char bIFSC; -} atreq_t; - - -/* what is particularly stupid in the original driver is the arch-dependent - * member sizes. This leads to CONFIG_COMPAT breakage, since 32bit userspace - * will lay out the structure members differently than the 64bit kernel. - * - * I've changed "ptsreq.protocol" from "unsigned long" to "__u32". - * On 32bit this will make no difference. With 64bit kernels, it will make - * 32bit apps work, too. - */ - -typedef struct ptsreq { - __u32 protocol; /*T=0: 2^0, T=1: 2^1*/ - unsigned char flags; - unsigned char pts1; - unsigned char pts2; - unsigned char pts3; -} ptsreq_t; - -#define CM_IOC_MAGIC 'c' -#define CM_IOC_MAXNR 255 - -#define CM_IOCGSTATUS _IOR (CM_IOC_MAGIC, 0, unsigned char *) -#define CM_IOCGATR _IOWR(CM_IOC_MAGIC, 1, atreq_t *) -#define CM_IOCSPTS _IOW (CM_IOC_MAGIC, 2, ptsreq_t *) -#define CM_IOCSRDR _IO (CM_IOC_MAGIC, 3) -#define CM_IOCARDOFF _IO (CM_IOC_MAGIC, 4) - -#define CM_IOSDBGLVL _IOW(CM_IOC_MAGIC, 250, int*) - -/* card and device states */ -#define CM_CARD_INSERTED 0x01 -#define CM_CARD_POWERED 0x02 -#define CM_ATR_PRESENT 0x04 -#define CM_ATR_VALID 0x08 -#define CM_STATE_VALID 0x0f -/* extra info only from CM4000 */ -#define CM_NO_READER 0x10 -#define CM_BAD_CARD 0x20 - - -#endif /* _CM4000_H_ */ diff --git a/linux-headers/include/linux/cn_proc.h b/linux-headers/include/linux/cn_proc.h index 46fe054d31d..85a79b58a2a 100644 --- a/linux-headers/include/linux/cn_proc.h +++ b/linux-headers/include/linux/cn_proc.h @@ -30,6 +30,49 @@ enum proc_cn_mcast_op { PROC_CN_MCAST_IGNORE = 2 }; +#define PROC_EVENT_ALL (PROC_EVENT_FORK | PROC_EVENT_EXEC | PROC_EVENT_UID | \ + PROC_EVENT_GID | PROC_EVENT_SID | PROC_EVENT_PTRACE | \ + PROC_EVENT_COMM | PROC_EVENT_NONZERO_EXIT | \ + PROC_EVENT_COREDUMP | PROC_EVENT_EXIT) + +/* + * If you add an entry in proc_cn_event, make sure you add it in + * PROC_EVENT_ALL above as well. + */ +enum proc_cn_event { + /* Use successive bits so the enums can be used to record + * sets of events as well + */ + PROC_EVENT_NONE = 0x00000000, + PROC_EVENT_FORK = 0x00000001, + PROC_EVENT_EXEC = 0x00000002, + PROC_EVENT_UID = 0x00000004, + PROC_EVENT_GID = 0x00000040, + PROC_EVENT_SID = 0x00000080, + PROC_EVENT_PTRACE = 0x00000100, + PROC_EVENT_COMM = 0x00000200, + /* "next" should be 0x00000400 */ + /* "last" is the last process event: exit, + * while "next to last" is coredumping event + * before that is report only if process dies + * with non-zero exit status + */ + PROC_EVENT_NONZERO_EXIT = 0x20000000, + PROC_EVENT_COREDUMP = 0x40000000, + PROC_EVENT_EXIT = 0x80000000 +}; + +struct proc_input { + enum proc_cn_mcast_op mcast_op; + enum proc_cn_event event_type; +}; + +static __inline__ enum proc_cn_event valid_event(enum proc_cn_event ev_type) +{ + ev_type &= PROC_EVENT_ALL; + return ev_type; +} + /* * From the user's point of view, the process * ID is the thread group ID and thread ID is the internal @@ -44,24 +87,7 @@ enum proc_cn_mcast_op { */ struct proc_event { - enum what { - /* Use successive bits so the enums can be used to record - * sets of events as well - */ - PROC_EVENT_NONE = 0x00000000, - PROC_EVENT_FORK = 0x00000001, - PROC_EVENT_EXEC = 0x00000002, - PROC_EVENT_UID = 0x00000004, - PROC_EVENT_GID = 0x00000040, - PROC_EVENT_SID = 0x00000080, - PROC_EVENT_PTRACE = 0x00000100, - PROC_EVENT_COMM = 0x00000200, - /* "next" should be 0x00000400 */ - /* "last" is the last process event: exit, - * while "next to last" is coredumping event */ - PROC_EVENT_COREDUMP = 0x40000000, - PROC_EVENT_EXIT = 0x80000000 - } what; + enum proc_cn_event what; __u32 cpu; __u64 __attribute__((aligned(8))) timestamp_ns; /* Number of nano seconds since system boot */ diff --git a/linux-headers/include/linux/comedi.h b/linux-headers/include/linux/comedi.h new file mode 100644 index 00000000000..6d305ae801f --- /dev/null +++ b/linux-headers/include/linux/comedi.h @@ -0,0 +1,1528 @@ +/* SPDX-License-Identifier: LGPL-2.0+ WITH Linux-syscall-note */ +/* + * comedi.h + * header file for COMEDI user API + * + * COMEDI - Linux Control and Measurement Device Interface + * Copyright (C) 1998-2001 David A. Schleef + */ + +#ifndef _COMEDI_H +#define _COMEDI_H + +#define COMEDI_MAJORVERSION 0 +#define COMEDI_MINORVERSION 7 +#define COMEDI_MICROVERSION 76 +#define VERSION "0.7.76" + +/* comedi's major device number */ +#define COMEDI_MAJOR 98 + +/* + * maximum number of minor devices. This can be increased, although + * kernel structures are currently statically allocated, thus you + * don't want this to be much more than you actually use. + */ +#define COMEDI_NDEVICES 16 + +/* number of config options in the config structure */ +#define COMEDI_NDEVCONFOPTS 32 + +/* + * NOTE: 'comedi_config --init-data' is deprecated + * + * The following indexes in the config options were used by + * comedi_config to pass firmware blobs from user space to the + * comedi drivers. The request_firmware() hotplug interface is + * now used by all comedi drivers instead. + */ + +/* length of nth chunk of firmware data -*/ +#define COMEDI_DEVCONF_AUX_DATA3_LENGTH 25 +#define COMEDI_DEVCONF_AUX_DATA2_LENGTH 26 +#define COMEDI_DEVCONF_AUX_DATA1_LENGTH 27 +#define COMEDI_DEVCONF_AUX_DATA0_LENGTH 28 +/* most significant 32 bits of pointer address (if needed) */ +#define COMEDI_DEVCONF_AUX_DATA_HI 29 +/* least significant 32 bits of pointer address */ +#define COMEDI_DEVCONF_AUX_DATA_LO 30 +#define COMEDI_DEVCONF_AUX_DATA_LENGTH 31 /* total data length */ + +/* max length of device and driver names */ +#define COMEDI_NAMELEN 20 + +/* packs and unpacks a channel/range number */ + +#define CR_PACK(chan, rng, aref) \ + ((((aref) & 0x3) << 24) | (((rng) & 0xff) << 16) | (chan)) +#define CR_PACK_FLAGS(chan, range, aref, flags) \ + (CR_PACK(chan, range, aref) | ((flags) & CR_FLAGS_MASK)) + +#define CR_CHAN(a) ((a) & 0xffff) +#define CR_RANGE(a) (((a) >> 16) & 0xff) +#define CR_AREF(a) (((a) >> 24) & 0x03) + +#define CR_FLAGS_MASK 0xfc000000 +#define CR_ALT_FILTER 0x04000000 +#define CR_DITHER CR_ALT_FILTER +#define CR_DEGLITCH CR_ALT_FILTER +#define CR_ALT_SOURCE 0x08000000 +#define CR_EDGE 0x40000000 +#define CR_INVERT 0x80000000 + +#define AREF_GROUND 0x00 /* analog ref = analog ground */ +#define AREF_COMMON 0x01 /* analog ref = analog common */ +#define AREF_DIFF 0x02 /* analog ref = differential */ +#define AREF_OTHER 0x03 /* analog ref = other (undefined) */ + +/* counters -- these are arbitrary values */ +#define GPCT_RESET 0x0001 +#define GPCT_SET_SOURCE 0x0002 +#define GPCT_SET_GATE 0x0004 +#define GPCT_SET_DIRECTION 0x0008 +#define GPCT_SET_OPERATION 0x0010 +#define GPCT_ARM 0x0020 +#define GPCT_DISARM 0x0040 +#define GPCT_GET_INT_CLK_FRQ 0x0080 + +#define GPCT_INT_CLOCK 0x0001 +#define GPCT_EXT_PIN 0x0002 +#define GPCT_NO_GATE 0x0004 +#define GPCT_UP 0x0008 +#define GPCT_DOWN 0x0010 +#define GPCT_HWUD 0x0020 +#define GPCT_SIMPLE_EVENT 0x0040 +#define GPCT_SINGLE_PERIOD 0x0080 +#define GPCT_SINGLE_PW 0x0100 +#define GPCT_CONT_PULSE_OUT 0x0200 +#define GPCT_SINGLE_PULSE_OUT 0x0400 + +/* instructions */ + +#define INSN_MASK_WRITE 0x8000000 +#define INSN_MASK_READ 0x4000000 +#define INSN_MASK_SPECIAL 0x2000000 + +#define INSN_READ (0 | INSN_MASK_READ) +#define INSN_WRITE (1 | INSN_MASK_WRITE) +#define INSN_BITS (2 | INSN_MASK_READ | INSN_MASK_WRITE) +#define INSN_CONFIG (3 | INSN_MASK_READ | INSN_MASK_WRITE) +#define INSN_DEVICE_CONFIG (INSN_CONFIG | INSN_MASK_SPECIAL) +#define INSN_GTOD (4 | INSN_MASK_READ | INSN_MASK_SPECIAL) +#define INSN_WAIT (5 | INSN_MASK_WRITE | INSN_MASK_SPECIAL) +#define INSN_INTTRIG (6 | INSN_MASK_WRITE | INSN_MASK_SPECIAL) + +/* command flags */ +/* These flags are used in comedi_cmd structures */ + +#define CMDF_BOGUS 0x00000001 /* do the motions */ + +/* try to use a real-time interrupt while performing command */ +#define CMDF_PRIORITY 0x00000008 + +/* wake up on end-of-scan events */ +#define CMDF_WAKE_EOS 0x00000020 + +#define CMDF_WRITE 0x00000040 + +#define CMDF_RAWDATA 0x00000080 + +/* timer rounding definitions */ +#define CMDF_ROUND_MASK 0x00030000 +#define CMDF_ROUND_NEAREST 0x00000000 +#define CMDF_ROUND_DOWN 0x00010000 +#define CMDF_ROUND_UP 0x00020000 +#define CMDF_ROUND_UP_NEXT 0x00030000 + +#define COMEDI_EV_START 0x00040000 +#define COMEDI_EV_SCAN_BEGIN 0x00080000 +#define COMEDI_EV_CONVERT 0x00100000 +#define COMEDI_EV_SCAN_END 0x00200000 +#define COMEDI_EV_STOP 0x00400000 + +/* compatibility definitions */ +#define TRIG_BOGUS CMDF_BOGUS +#define TRIG_RT CMDF_PRIORITY +#define TRIG_WAKE_EOS CMDF_WAKE_EOS +#define TRIG_WRITE CMDF_WRITE +#define TRIG_ROUND_MASK CMDF_ROUND_MASK +#define TRIG_ROUND_NEAREST CMDF_ROUND_NEAREST +#define TRIG_ROUND_DOWN CMDF_ROUND_DOWN +#define TRIG_ROUND_UP CMDF_ROUND_UP +#define TRIG_ROUND_UP_NEXT CMDF_ROUND_UP_NEXT + +/* trigger sources */ + +#define TRIG_ANY 0xffffffff +#define TRIG_INVALID 0x00000000 + +#define TRIG_NONE 0x00000001 /* never trigger */ +#define TRIG_NOW 0x00000002 /* trigger now + N ns */ +#define TRIG_FOLLOW 0x00000004 /* trigger on next lower level trig */ +#define TRIG_TIME 0x00000008 /* trigger at time N ns */ +#define TRIG_TIMER 0x00000010 /* trigger at rate N ns */ +#define TRIG_COUNT 0x00000020 /* trigger when count reaches N */ +#define TRIG_EXT 0x00000040 /* trigger on external signal N */ +#define TRIG_INT 0x00000080 /* trigger on comedi-internal signal N */ +#define TRIG_OTHER 0x00000100 /* driver defined */ + +/* subdevice flags */ + +#define SDF_BUSY 0x0001 /* device is busy */ +#define SDF_BUSY_OWNER 0x0002 /* device is busy with your job */ +#define SDF_LOCKED 0x0004 /* subdevice is locked */ +#define SDF_LOCK_OWNER 0x0008 /* you own lock */ +#define SDF_MAXDATA 0x0010 /* maxdata depends on channel */ +#define SDF_FLAGS 0x0020 /* flags depend on channel */ +#define SDF_RANGETYPE 0x0040 /* range type depends on channel */ +#define SDF_PWM_COUNTER 0x0080 /* PWM can automatically switch off */ +#define SDF_PWM_HBRIDGE 0x0100 /* PWM is signed (H-bridge) */ +#define SDF_CMD 0x1000 /* can do commands (deprecated) */ +#define SDF_SOFT_CALIBRATED 0x2000 /* subdevice uses software calibration */ +#define SDF_CMD_WRITE 0x4000 /* can do output commands */ +#define SDF_CMD_READ 0x8000 /* can do input commands */ + +/* subdevice can be read (e.g. analog input) */ +#define SDF_READABLE 0x00010000 +/* subdevice can be written (e.g. analog output) */ +#define SDF_WRITABLE 0x00020000 +#define SDF_WRITEABLE SDF_WRITABLE /* spelling error in API */ +/* subdevice does not have externally visible lines */ +#define SDF_INTERNAL 0x00040000 +#define SDF_GROUND 0x00100000 /* can do aref=ground */ +#define SDF_COMMON 0x00200000 /* can do aref=common */ +#define SDF_DIFF 0x00400000 /* can do aref=diff */ +#define SDF_OTHER 0x00800000 /* can do aref=other */ +#define SDF_DITHER 0x01000000 /* can do dithering */ +#define SDF_DEGLITCH 0x02000000 /* can do deglitching */ +#define SDF_MMAP 0x04000000 /* can do mmap() */ +#define SDF_RUNNING 0x08000000 /* subdevice is acquiring data */ +#define SDF_LSAMPL 0x10000000 /* subdevice uses 32-bit samples */ +#define SDF_PACKED 0x20000000 /* subdevice can do packed DIO */ + +/* subdevice types */ + +/** + * enum comedi_subdevice_type - COMEDI subdevice types + * @COMEDI_SUBD_UNUSED: Unused subdevice. + * @COMEDI_SUBD_AI: Analog input. + * @COMEDI_SUBD_AO: Analog output. + * @COMEDI_SUBD_DI: Digital input. + * @COMEDI_SUBD_DO: Digital output. + * @COMEDI_SUBD_DIO: Digital input/output. + * @COMEDI_SUBD_COUNTER: Counter. + * @COMEDI_SUBD_TIMER: Timer. + * @COMEDI_SUBD_MEMORY: Memory, EEPROM, DPRAM. + * @COMEDI_SUBD_CALIB: Calibration DACs. + * @COMEDI_SUBD_PROC: Processor, DSP. + * @COMEDI_SUBD_SERIAL: Serial I/O. + * @COMEDI_SUBD_PWM: Pulse-Width Modulation output. + */ +enum comedi_subdevice_type { + COMEDI_SUBD_UNUSED, + COMEDI_SUBD_AI, + COMEDI_SUBD_AO, + COMEDI_SUBD_DI, + COMEDI_SUBD_DO, + COMEDI_SUBD_DIO, + COMEDI_SUBD_COUNTER, + COMEDI_SUBD_TIMER, + COMEDI_SUBD_MEMORY, + COMEDI_SUBD_CALIB, + COMEDI_SUBD_PROC, + COMEDI_SUBD_SERIAL, + COMEDI_SUBD_PWM +}; + +/* configuration instructions */ + +/** + * enum comedi_io_direction - COMEDI I/O directions + * @COMEDI_INPUT: Input. + * @COMEDI_OUTPUT: Output. + * @COMEDI_OPENDRAIN: Open-drain (or open-collector) output. + * + * These are used by the %INSN_CONFIG_DIO_QUERY configuration instruction to + * report a direction. They may also be used in other places where a direction + * needs to be specified. + */ +enum comedi_io_direction { + COMEDI_INPUT = 0, + COMEDI_OUTPUT = 1, + COMEDI_OPENDRAIN = 2 +}; + +/** + * enum configuration_ids - COMEDI configuration instruction codes + * @INSN_CONFIG_DIO_INPUT: Configure digital I/O as input. + * @INSN_CONFIG_DIO_OUTPUT: Configure digital I/O as output. + * @INSN_CONFIG_DIO_OPENDRAIN: Configure digital I/O as open-drain (or open + * collector) output. + * @INSN_CONFIG_ANALOG_TRIG: Configure analog trigger. + * @INSN_CONFIG_ALT_SOURCE: Configure alternate input source. + * @INSN_CONFIG_DIGITAL_TRIG: Configure digital trigger. + * @INSN_CONFIG_BLOCK_SIZE: Configure block size for DMA transfers. + * @INSN_CONFIG_TIMER_1: Configure divisor for external clock. + * @INSN_CONFIG_FILTER: Configure a filter. + * @INSN_CONFIG_CHANGE_NOTIFY: Configure change notification for digital + * inputs. (New drivers should use + * %INSN_CONFIG_DIGITAL_TRIG instead.) + * @INSN_CONFIG_SERIAL_CLOCK: Configure clock for serial I/O. + * @INSN_CONFIG_BIDIRECTIONAL_DATA: Send and receive byte over serial I/O. + * @INSN_CONFIG_DIO_QUERY: Query direction of digital I/O channel. + * @INSN_CONFIG_PWM_OUTPUT: Configure pulse-width modulator output. + * @INSN_CONFIG_GET_PWM_OUTPUT: Get pulse-width modulator output configuration. + * @INSN_CONFIG_ARM: Arm a subdevice or channel. + * @INSN_CONFIG_DISARM: Disarm a subdevice or channel. + * @INSN_CONFIG_GET_COUNTER_STATUS: Get counter status. + * @INSN_CONFIG_RESET: Reset a subdevice or channel. + * @INSN_CONFIG_GPCT_SINGLE_PULSE_GENERATOR: Configure counter/timer as + * single pulse generator. + * @INSN_CONFIG_GPCT_PULSE_TRAIN_GENERATOR: Configure counter/timer as + * pulse train generator. + * @INSN_CONFIG_GPCT_QUADRATURE_ENCODER: Configure counter as a quadrature + * encoder. + * @INSN_CONFIG_SET_GATE_SRC: Set counter/timer gate source. + * @INSN_CONFIG_GET_GATE_SRC: Get counter/timer gate source. + * @INSN_CONFIG_SET_CLOCK_SRC: Set counter/timer master clock source. + * @INSN_CONFIG_GET_CLOCK_SRC: Get counter/timer master clock source. + * @INSN_CONFIG_SET_OTHER_SRC: Set counter/timer "other" source. + * @INSN_CONFIG_GET_HARDWARE_BUFFER_SIZE: Get size (in bytes) of subdevice's + * on-board FIFOs used during streaming + * input/output. + * @INSN_CONFIG_SET_COUNTER_MODE: Set counter/timer mode. + * @INSN_CONFIG_8254_SET_MODE: (Deprecated) Same as + * %INSN_CONFIG_SET_COUNTER_MODE. + * @INSN_CONFIG_8254_READ_STATUS: Read status of 8254 counter channel. + * @INSN_CONFIG_SET_ROUTING: Set routing for a channel. + * @INSN_CONFIG_GET_ROUTING: Get routing for a channel. + * @INSN_CONFIG_PWM_SET_PERIOD: Set PWM period in nanoseconds. + * @INSN_CONFIG_PWM_GET_PERIOD: Get PWM period in nanoseconds. + * @INSN_CONFIG_GET_PWM_STATUS: Get PWM status. + * @INSN_CONFIG_PWM_SET_H_BRIDGE: Set PWM H bridge duty cycle and polarity for + * a relay simultaneously. + * @INSN_CONFIG_PWM_GET_H_BRIDGE: Get PWM H bridge duty cycle and polarity. + * @INSN_CONFIG_GET_CMD_TIMING_CONSTRAINTS: Get the hardware timing restraints, + * regardless of trigger sources. + */ +enum configuration_ids { + INSN_CONFIG_DIO_INPUT = COMEDI_INPUT, + INSN_CONFIG_DIO_OUTPUT = COMEDI_OUTPUT, + INSN_CONFIG_DIO_OPENDRAIN = COMEDI_OPENDRAIN, + INSN_CONFIG_ANALOG_TRIG = 16, +/* INSN_CONFIG_WAVEFORM = 17, */ +/* INSN_CONFIG_TRIG = 18, */ +/* INSN_CONFIG_COUNTER = 19, */ + INSN_CONFIG_ALT_SOURCE = 20, + INSN_CONFIG_DIGITAL_TRIG = 21, + INSN_CONFIG_BLOCK_SIZE = 22, + INSN_CONFIG_TIMER_1 = 23, + INSN_CONFIG_FILTER = 24, + INSN_CONFIG_CHANGE_NOTIFY = 25, + + INSN_CONFIG_SERIAL_CLOCK = 26, /*ALPHA*/ + INSN_CONFIG_BIDIRECTIONAL_DATA = 27, + INSN_CONFIG_DIO_QUERY = 28, + INSN_CONFIG_PWM_OUTPUT = 29, + INSN_CONFIG_GET_PWM_OUTPUT = 30, + INSN_CONFIG_ARM = 31, + INSN_CONFIG_DISARM = 32, + INSN_CONFIG_GET_COUNTER_STATUS = 33, + INSN_CONFIG_RESET = 34, + INSN_CONFIG_GPCT_SINGLE_PULSE_GENERATOR = 1001, + INSN_CONFIG_GPCT_PULSE_TRAIN_GENERATOR = 1002, + INSN_CONFIG_GPCT_QUADRATURE_ENCODER = 1003, + INSN_CONFIG_SET_GATE_SRC = 2001, + INSN_CONFIG_GET_GATE_SRC = 2002, + INSN_CONFIG_SET_CLOCK_SRC = 2003, + INSN_CONFIG_GET_CLOCK_SRC = 2004, + INSN_CONFIG_SET_OTHER_SRC = 2005, + INSN_CONFIG_GET_HARDWARE_BUFFER_SIZE = 2006, + INSN_CONFIG_SET_COUNTER_MODE = 4097, + INSN_CONFIG_8254_SET_MODE = INSN_CONFIG_SET_COUNTER_MODE, + INSN_CONFIG_8254_READ_STATUS = 4098, + INSN_CONFIG_SET_ROUTING = 4099, + INSN_CONFIG_GET_ROUTING = 4109, + INSN_CONFIG_PWM_SET_PERIOD = 5000, + INSN_CONFIG_PWM_GET_PERIOD = 5001, + INSN_CONFIG_GET_PWM_STATUS = 5002, + INSN_CONFIG_PWM_SET_H_BRIDGE = 5003, + INSN_CONFIG_PWM_GET_H_BRIDGE = 5004, + INSN_CONFIG_GET_CMD_TIMING_CONSTRAINTS = 5005, +}; + +/** + * enum device_configuration_ids - COMEDI configuration instruction codes global + * to an entire device. + * @INSN_DEVICE_CONFIG_TEST_ROUTE: Validate the possibility of a + * globally-named route + * @INSN_DEVICE_CONFIG_CONNECT_ROUTE: Connect a globally-named route + * @INSN_DEVICE_CONFIG_DISCONNECT_ROUTE:Disconnect a globally-named route + * @INSN_DEVICE_CONFIG_GET_ROUTES: Get a list of all globally-named routes + * that are valid for a particular device. + */ +enum device_config_route_ids { + INSN_DEVICE_CONFIG_TEST_ROUTE = 0, + INSN_DEVICE_CONFIG_CONNECT_ROUTE = 1, + INSN_DEVICE_CONFIG_DISCONNECT_ROUTE = 2, + INSN_DEVICE_CONFIG_GET_ROUTES = 3, +}; + +/** + * enum comedi_digital_trig_op - operations for configuring a digital trigger + * @COMEDI_DIGITAL_TRIG_DISABLE: Return digital trigger to its default, + * inactive, unconfigured state. + * @COMEDI_DIGITAL_TRIG_ENABLE_EDGES: Set rising and/or falling edge inputs + * that each can fire the trigger. + * @COMEDI_DIGITAL_TRIG_ENABLE_LEVELS: Set a combination of high and/or low + * level inputs that can fire the trigger. + * + * These are used with the %INSN_CONFIG_DIGITAL_TRIG configuration instruction. + * The data for the configuration instruction is as follows... + * + * data[%0] = %INSN_CONFIG_DIGITAL_TRIG + * + * data[%1] = trigger ID + * + * data[%2] = configuration operation + * + * data[%3] = configuration parameter 1 + * + * data[%4] = configuration parameter 2 + * + * data[%5] = configuration parameter 3 + * + * The trigger ID (data[%1]) is used to differentiate multiple digital triggers + * belonging to the same subdevice. The configuration operation (data[%2]) is + * one of the enum comedi_digital_trig_op values. The configuration + * parameters (data[%3], data[%4], and data[%5]) depend on the operation; they + * are not used with %COMEDI_DIGITAL_TRIG_DISABLE. + * + * For %COMEDI_DIGITAL_TRIG_ENABLE_EDGES and %COMEDI_DIGITAL_TRIG_ENABLE_LEVELS, + * configuration parameter 1 (data[%3]) contains a "left-shift" value that + * specifies the input corresponding to bit 0 of configuration parameters 2 + * and 3. This is useful if the trigger has more than 32 inputs. + * + * For %COMEDI_DIGITAL_TRIG_ENABLE_EDGES, configuration parameter 2 (data[%4]) + * specifies which of up to 32 inputs have rising-edge sensitivity, and + * configuration parameter 3 (data[%5]) specifies which of up to 32 inputs + * have falling-edge sensitivity that can fire the trigger. + * + * For %COMEDI_DIGITAL_TRIG_ENABLE_LEVELS, configuration parameter 2 (data[%4]) + * specifies which of up to 32 inputs must be at a high level, and + * configuration parameter 3 (data[%5]) specifies which of up to 32 inputs + * must be at a low level for the trigger to fire. + * + * Some sequences of %INSN_CONFIG_DIGITAL_TRIG instructions may have a (partly) + * accumulative effect, depending on the low-level driver. This is useful + * when setting up a trigger that has more than 32 inputs, or has a combination + * of edge- and level-triggered inputs. + */ +enum comedi_digital_trig_op { + COMEDI_DIGITAL_TRIG_DISABLE = 0, + COMEDI_DIGITAL_TRIG_ENABLE_EDGES = 1, + COMEDI_DIGITAL_TRIG_ENABLE_LEVELS = 2 +}; + +/** + * enum comedi_support_level - support level for a COMEDI feature + * @COMEDI_UNKNOWN_SUPPORT: Unspecified support for feature. + * @COMEDI_SUPPORTED: Feature is supported. + * @COMEDI_UNSUPPORTED: Feature is unsupported. + */ +enum comedi_support_level { + COMEDI_UNKNOWN_SUPPORT = 0, + COMEDI_SUPPORTED, + COMEDI_UNSUPPORTED +}; + +/** + * enum comedi_counter_status_flags - counter status bits + * @COMEDI_COUNTER_ARMED: Counter is armed. + * @COMEDI_COUNTER_COUNTING: Counter is counting. + * @COMEDI_COUNTER_TERMINAL_COUNT: Counter reached terminal count. + * + * These bitwise values are used by the %INSN_CONFIG_GET_COUNTER_STATUS + * configuration instruction to report the status of a counter. + */ +enum comedi_counter_status_flags { + COMEDI_COUNTER_ARMED = 0x1, + COMEDI_COUNTER_COUNTING = 0x2, + COMEDI_COUNTER_TERMINAL_COUNT = 0x4, +}; + +/* ioctls */ + +#define CIO 'd' +#define COMEDI_DEVCONFIG _IOW(CIO, 0, struct comedi_devconfig) +#define COMEDI_DEVINFO _IOR(CIO, 1, struct comedi_devinfo) +#define COMEDI_SUBDINFO _IOR(CIO, 2, struct comedi_subdinfo) +#define COMEDI_CHANINFO _IOR(CIO, 3, struct comedi_chaninfo) +/* _IOWR(CIO, 4, ...) is reserved */ +#define COMEDI_LOCK _IO(CIO, 5) +#define COMEDI_UNLOCK _IO(CIO, 6) +#define COMEDI_CANCEL _IO(CIO, 7) +#define COMEDI_RANGEINFO _IOR(CIO, 8, struct comedi_rangeinfo) +#define COMEDI_CMD _IOR(CIO, 9, struct comedi_cmd) +#define COMEDI_CMDTEST _IOR(CIO, 10, struct comedi_cmd) +#define COMEDI_INSNLIST _IOR(CIO, 11, struct comedi_insnlist) +#define COMEDI_INSN _IOR(CIO, 12, struct comedi_insn) +#define COMEDI_BUFCONFIG _IOR(CIO, 13, struct comedi_bufconfig) +#define COMEDI_BUFINFO _IOWR(CIO, 14, struct comedi_bufinfo) +#define COMEDI_POLL _IO(CIO, 15) +#define COMEDI_SETRSUBD _IO(CIO, 16) +#define COMEDI_SETWSUBD _IO(CIO, 17) + +/* structures */ + +/** + * struct comedi_insn - COMEDI instruction + * @insn: COMEDI instruction type (%INSN_xxx). + * @n: Length of @data[]. + * @data: Pointer to data array operated on by the instruction. + * @subdev: Subdevice index. + * @chanspec: A packed "chanspec" value consisting of channel number, + * analog range index, analog reference type, and flags. + * @unused: Reserved for future use. + * + * This is used with the %COMEDI_INSN ioctl, and indirectly with the + * %COMEDI_INSNLIST ioctl. + */ +struct comedi_insn { + unsigned int insn; + unsigned int n; + unsigned int *data; + unsigned int subdev; + unsigned int chanspec; + unsigned int unused[3]; +}; + +/** + * struct comedi_insnlist - list of COMEDI instructions + * @n_insns: Number of COMEDI instructions. + * @insns: Pointer to array COMEDI instructions. + * + * This is used with the %COMEDI_INSNLIST ioctl. + */ +struct comedi_insnlist { + unsigned int n_insns; + struct comedi_insn *insns; +}; + +/** + * struct comedi_cmd - COMEDI asynchronous acquisition command details + * @subdev: Subdevice index. + * @flags: Command flags (%CMDF_xxx). + * @start_src: "Start acquisition" trigger source (%TRIG_xxx). + * @start_arg: "Start acquisition" trigger argument. + * @scan_begin_src: "Scan begin" trigger source. + * @scan_begin_arg: "Scan begin" trigger argument. + * @convert_src: "Convert" trigger source. + * @convert_arg: "Convert" trigger argument. + * @scan_end_src: "Scan end" trigger source. + * @scan_end_arg: "Scan end" trigger argument. + * @stop_src: "Stop acquisition" trigger source. + * @stop_arg: "Stop acquisition" trigger argument. + * @chanlist: Pointer to array of "chanspec" values, containing a + * sequence of channel numbers packed with analog range + * index, etc. + * @chanlist_len: Number of channels in sequence. + * @data: Pointer to miscellaneous set-up data (not used). + * @data_len: Length of miscellaneous set-up data. + * + * This is used with the %COMEDI_CMD or %COMEDI_CMDTEST ioctl to set-up + * or validate an asynchronous acquisition command. The ioctl may modify + * the &struct comedi_cmd and copy it back to the caller. + * + * Optional command @flags values that can be ORed together... + * + * %CMDF_BOGUS - makes %COMEDI_CMD ioctl return error %EAGAIN instead of + * starting the command. + * + * %CMDF_PRIORITY - requests "hard real-time" processing (which is not + * supported in this version of COMEDI). + * + * %CMDF_WAKE_EOS - requests the command makes data available for reading + * after every "scan" period. + * + * %CMDF_WRITE - marks the command as being in the "write" (to device) + * direction. This does not need to be specified by the caller unless the + * subdevice supports commands in either direction. + * + * %CMDF_RAWDATA - prevents the command from "munging" the data between the + * COMEDI sample format and the raw hardware sample format. + * + * %CMDF_ROUND_NEAREST - requests timing periods to be rounded to nearest + * supported values. + * + * %CMDF_ROUND_DOWN - requests timing periods to be rounded down to supported + * values (frequencies rounded up). + * + * %CMDF_ROUND_UP - requests timing periods to be rounded up to supported + * values (frequencies rounded down). + * + * Trigger source values for @start_src, @scan_begin_src, @convert_src, + * @scan_end_src, and @stop_src... + * + * %TRIG_ANY - "all ones" value used to test which trigger sources are + * supported. + * + * %TRIG_INVALID - "all zeroes" value used to indicate that all requested + * trigger sources are invalid. + * + * %TRIG_NONE - never trigger (often used as a @stop_src value). + * + * %TRIG_NOW - trigger after '_arg' nanoseconds. + * + * %TRIG_FOLLOW - trigger follows another event. + * + * %TRIG_TIMER - trigger every '_arg' nanoseconds. + * + * %TRIG_COUNT - trigger when count '_arg' is reached. + * + * %TRIG_EXT - trigger on external signal specified by '_arg'. + * + * %TRIG_INT - trigger on internal, software trigger specified by '_arg'. + * + * %TRIG_OTHER - trigger on other, driver-defined signal specified by '_arg'. + */ +struct comedi_cmd { + unsigned int subdev; + unsigned int flags; + + unsigned int start_src; + unsigned int start_arg; + + unsigned int scan_begin_src; + unsigned int scan_begin_arg; + + unsigned int convert_src; + unsigned int convert_arg; + + unsigned int scan_end_src; + unsigned int scan_end_arg; + + unsigned int stop_src; + unsigned int stop_arg; + + unsigned int *chanlist; + unsigned int chanlist_len; + + short *data; + unsigned int data_len; +}; + +/** + * struct comedi_chaninfo - used to retrieve per-channel information + * @subdev: Subdevice index. + * @maxdata_list: Optional pointer to per-channel maximum data values. + * @flaglist: Optional pointer to per-channel flags. + * @rangelist: Optional pointer to per-channel range types. + * @unused: Reserved for future use. + * + * This is used with the %COMEDI_CHANINFO ioctl to get per-channel information + * for the subdevice. Use of this requires knowledge of the number of channels + * and subdevice flags obtained using the %COMEDI_SUBDINFO ioctl. + * + * The @maxdata_list member must be %NULL unless the %SDF_MAXDATA subdevice + * flag is set. The @flaglist member must be %NULL unless the %SDF_FLAGS + * subdevice flag is set. The @rangelist member must be %NULL unless the + * %SDF_RANGETYPE subdevice flag is set. Otherwise, the arrays they point to + * must be at least as long as the number of channels. + */ +struct comedi_chaninfo { + unsigned int subdev; + unsigned int *maxdata_list; + unsigned int *flaglist; + unsigned int *rangelist; + unsigned int unused[4]; +}; + +/** + * struct comedi_rangeinfo - used to retrieve the range table for a channel + * @range_type: Encodes subdevice index (bits 27:24), channel index + * (bits 23:16) and range table length (bits 15:0). + * @range_ptr: Pointer to array of @struct comedi_krange to be filled + * in with the range table for the channel or subdevice. + * + * This is used with the %COMEDI_RANGEINFO ioctl to retrieve the range table + * for a specific channel (if the subdevice has the %SDF_RANGETYPE flag set to + * indicate that the range table depends on the channel), or for the subdevice + * as a whole (if the %SDF_RANGETYPE flag is clear, indicating the range table + * is shared by all channels). + * + * The @range_type value is an input to the ioctl and comes from a previous + * use of the %COMEDI_SUBDINFO ioctl (if the %SDF_RANGETYPE flag is clear), + * or the %COMEDI_CHANINFO ioctl (if the %SDF_RANGETYPE flag is set). + */ +struct comedi_rangeinfo { + unsigned int range_type; + void *range_ptr; +}; + +/** + * struct comedi_krange - describes a range in a range table + * @min: Minimum value in millionths (1e-6) of a unit. + * @max: Maximum value in millionths (1e-6) of a unit. + * @flags: Indicates the units (in bits 7:0) OR'ed with optional flags. + * + * A range table is associated with a single channel, or with all channels in a + * subdevice, and a list of one or more ranges. A %struct comedi_krange + * describes the physical range of units for one of those ranges. Sample + * values in COMEDI are unsigned from %0 up to some 'maxdata' value. The + * mapping from sample values to physical units is assumed to be nomimally + * linear (for the purpose of describing the range), with sample value %0 + * mapping to @min, and the 'maxdata' sample value mapping to @max. + * + * The currently defined units are %UNIT_volt (%0), %UNIT_mA (%1), and + * %UNIT_none (%2). The @min and @max values are the physical range multiplied + * by 1e6, so a @max value of %1000000 (with %UNIT_volt) represents a maximal + * value of 1 volt. + * + * The only defined flag value is %RF_EXTERNAL (%0x100), indicating that the + * range needs to be multiplied by an external reference. + */ +struct comedi_krange { + int min; + int max; + unsigned int flags; +}; + +/** + * struct comedi_subdinfo - used to retrieve information about a subdevice + * @type: Type of subdevice from &enum comedi_subdevice_type. + * @n_chan: Number of channels the subdevice supports. + * @subd_flags: A mixture of static and dynamic flags describing + * aspects of the subdevice and its current state. + * @timer_type: Timer type. Always set to %5 ("nanosecond timer"). + * @len_chanlist: Maximum length of a channel list if the subdevice + * supports asynchronous acquisition commands. + * @maxdata: Maximum sample value for all channels if the + * %SDF_MAXDATA subdevice flag is clear. + * @flags: Channel flags for all channels if the %SDF_FLAGS + * subdevice flag is clear. + * @range_type: The range type for all channels if the %SDF_RANGETYPE + * subdevice flag is clear. Encodes the subdevice index + * (bits 27:24), a dummy channel index %0 (bits 23:16), + * and the range table length (bits 15:0). + * @settling_time_0: Not used. + * @insn_bits_support: Set to %COMEDI_SUPPORTED if the subdevice supports the + * %INSN_BITS instruction, or to %COMEDI_UNSUPPORTED if it + * does not. + * @unused: Reserved for future use. + * + * This is used with the %COMEDI_SUBDINFO ioctl which copies an array of + * &struct comedi_subdinfo back to user space, with one element per subdevice. + * Use of this requires knowledge of the number of subdevices obtained from + * the %COMEDI_DEVINFO ioctl. + * + * These are the @subd_flags values that may be ORed together... + * + * %SDF_BUSY - the subdevice is busy processing an asynchronous command or a + * synchronous instruction. + * + * %SDF_BUSY_OWNER - the subdevice is busy processing an asynchronous + * acquisition command started on the current file object (the file object + * issuing the %COMEDI_SUBDINFO ioctl). + * + * %SDF_LOCKED - the subdevice is locked by a %COMEDI_LOCK ioctl. + * + * %SDF_LOCK_OWNER - the subdevice is locked by a %COMEDI_LOCK ioctl from the + * current file object. + * + * %SDF_MAXDATA - maximum sample values are channel-specific. + * + * %SDF_FLAGS - channel flags are channel-specific. + * + * %SDF_RANGETYPE - range types are channel-specific. + * + * %SDF_PWM_COUNTER - PWM can switch off automatically. + * + * %SDF_PWM_HBRIDGE - or PWM is signed (H-bridge). + * + * %SDF_CMD - the subdevice supports asynchronous commands. + * + * %SDF_SOFT_CALIBRATED - the subdevice uses software calibration. + * + * %SDF_CMD_WRITE - the subdevice supports asynchronous commands in the output + * ("write") direction. + * + * %SDF_CMD_READ - the subdevice supports asynchronous commands in the input + * ("read") direction. + * + * %SDF_READABLE - the subdevice is readable (e.g. analog input). + * + * %SDF_WRITABLE (aliased as %SDF_WRITEABLE) - the subdevice is writable (e.g. + * analog output). + * + * %SDF_INTERNAL - the subdevice has no externally visible lines. + * + * %SDF_GROUND - the subdevice can use ground as an analog reference. + * + * %SDF_COMMON - the subdevice can use a common analog reference. + * + * %SDF_DIFF - the subdevice can use differential inputs (or outputs). + * + * %SDF_OTHER - the subdevice can use some other analog reference. + * + * %SDF_DITHER - the subdevice can do dithering. + * + * %SDF_DEGLITCH - the subdevice can do deglitching. + * + * %SDF_MMAP - this is never set. + * + * %SDF_RUNNING - an asynchronous command is still running. + * + * %SDF_LSAMPL - the subdevice uses "long" (32-bit) samples (for asynchronous + * command data). + * + * %SDF_PACKED - the subdevice packs several DIO samples into a single sample + * (for asynchronous command data). + * + * No "channel flags" (@flags) values are currently defined. + */ +struct comedi_subdinfo { + unsigned int type; + unsigned int n_chan; + unsigned int subd_flags; + unsigned int timer_type; + unsigned int len_chanlist; + unsigned int maxdata; + unsigned int flags; + unsigned int range_type; + unsigned int settling_time_0; + unsigned int insn_bits_support; + unsigned int unused[8]; +}; + +/** + * struct comedi_devinfo - used to retrieve information about a COMEDI device + * @version_code: COMEDI version code. + * @n_subdevs: Number of subdevices the device has. + * @driver_name: Null-terminated COMEDI driver name. + * @board_name: Null-terminated COMEDI board name. + * @read_subdevice: Index of the current "read" subdevice (%-1 if none). + * @write_subdevice: Index of the current "write" subdevice (%-1 if none). + * @unused: Reserved for future use. + * + * This is used with the %COMEDI_DEVINFO ioctl to get basic information about + * the device. + */ +struct comedi_devinfo { + unsigned int version_code; + unsigned int n_subdevs; + char driver_name[COMEDI_NAMELEN]; + char board_name[COMEDI_NAMELEN]; + int read_subdevice; + int write_subdevice; + int unused[30]; +}; + +/** + * struct comedi_devconfig - used to configure a legacy COMEDI device + * @board_name: Null-terminated string specifying the type of board + * to configure. + * @options: An array of integer configuration options. + * + * This is used with the %COMEDI_DEVCONFIG ioctl to configure a "legacy" COMEDI + * device, such as an ISA card. Not all COMEDI drivers support this. Those + * that do either expect the specified board name to match one of a list of + * names registered with the COMEDI core, or expect the specified board name + * to match the COMEDI driver name itself. The configuration options are + * handled in a driver-specific manner. + */ +struct comedi_devconfig { + char board_name[COMEDI_NAMELEN]; + int options[COMEDI_NDEVCONFOPTS]; +}; + +/** + * struct comedi_bufconfig - used to set or get buffer size for a subdevice + * @subdevice: Subdevice index. + * @flags: Not used. + * @maximum_size: Maximum allowed buffer size. + * @size: Buffer size. + * @unused: Reserved for future use. + * + * This is used with the %COMEDI_BUFCONFIG ioctl to get or configure the + * maximum buffer size and current buffer size for a COMEDI subdevice that + * supports asynchronous commands. If the subdevice does not support + * asynchronous commands, @maximum_size and @size are ignored and set to 0. + * + * On ioctl input, non-zero values of @maximum_size and @size specify a + * new maximum size and new current size (in bytes), respectively. These + * will by rounded up to a multiple of %PAGE_SIZE. Specifying a new maximum + * size requires admin capabilities. + * + * On ioctl output, @maximum_size and @size and set to the current maximum + * buffer size and current buffer size, respectively. + */ +struct comedi_bufconfig { + unsigned int subdevice; + unsigned int flags; + + unsigned int maximum_size; + unsigned int size; + + unsigned int unused[4]; +}; + +/** + * struct comedi_bufinfo - used to manipulate buffer position for a subdevice + * @subdevice: Subdevice index. + * @bytes_read: Specify amount to advance read position for an + * asynchronous command in the input ("read") direction. + * @buf_write_ptr: Current write position (index) within the buffer. + * @buf_read_ptr: Current read position (index) within the buffer. + * @buf_write_count: Total amount written, modulo 2^32. + * @buf_read_count: Total amount read, modulo 2^32. + * @bytes_written: Specify amount to advance write position for an + * asynchronous command in the output ("write") direction. + * @unused: Reserved for future use. + * + * This is used with the %COMEDI_BUFINFO ioctl to optionally advance the + * current read or write position in an asynchronous acquisition data buffer, + * and to get the current read and write positions in the buffer. + */ +struct comedi_bufinfo { + unsigned int subdevice; + unsigned int bytes_read; + + unsigned int buf_write_ptr; + unsigned int buf_read_ptr; + unsigned int buf_write_count; + unsigned int buf_read_count; + + unsigned int bytes_written; + + unsigned int unused[4]; +}; + +/* range stuff */ + +#define __RANGE(a, b) ((((a) & 0xffff) << 16) | ((b) & 0xffff)) + +#define RANGE_OFFSET(a) (((a) >> 16) & 0xffff) +#define RANGE_LENGTH(b) ((b) & 0xffff) + +#define RF_UNIT(flags) ((flags) & 0xff) +#define RF_EXTERNAL 0x100 + +#define UNIT_volt 0 +#define UNIT_mA 1 +#define UNIT_none 2 + +#define COMEDI_MIN_SPEED 0xffffffffu + +/**********************************************************/ +/* everything after this line is ALPHA */ +/**********************************************************/ + +/* + * 8254 specific configuration. + * + * It supports two config commands: + * + * 0 ID: INSN_CONFIG_SET_COUNTER_MODE + * 1 8254 Mode + * I8254_MODE0, I8254_MODE1, ..., I8254_MODE5 + * OR'ed with: + * I8254_BCD, I8254_BINARY + * + * 0 ID: INSN_CONFIG_8254_READ_STATUS + * 1 <-- Status byte returned here. + * B7 = Output + * B6 = NULL Count + * B5 - B0 Current mode. + */ + +enum i8254_mode { + I8254_MODE0 = (0 << 1), /* Interrupt on terminal count */ + I8254_MODE1 = (1 << 1), /* Hardware retriggerable one-shot */ + I8254_MODE2 = (2 << 1), /* Rate generator */ + I8254_MODE3 = (3 << 1), /* Square wave mode */ + I8254_MODE4 = (4 << 1), /* Software triggered strobe */ + /* Hardware triggered strobe (retriggerable) */ + I8254_MODE5 = (5 << 1), + /* Use binary-coded decimal instead of binary (pretty useless) */ + I8254_BCD = 1, + I8254_BINARY = 0 +}; + +/* *** BEGIN GLOBALLY-NAMED NI TERMINALS/SIGNALS *** */ + +/* + * Common National Instruments Terminal/Signal names. + * Some of these have no NI_ prefix as they are useful for non-NI hardware, such + * as those that utilize the PXI/RTSI trigger lines. + * + * NOTE ABOUT THE CHOICE OF NAMES HERE AND THE CAMELSCRIPT: + * The choice to use CamelScript and the exact names below is for + * maintainability, clarity, similarity to manufacturer's documentation, + * _and_ a mitigation for confusion that has plagued the use of these drivers + * for years! + * + * More detail: + * There have been significant confusions over the past many years for users + * when trying to understand how to connect to/from signals and terminals on + * NI hardware using comedi. The major reason for this is that the actual + * register values were exposed and required to be used by users. Several + * major reasons exist why this caused major confusion for users: + * 1) The register values are _NOT_ in user documentation, but rather in + * arcane locations, such as a few register programming manuals that are + * increasingly hard to find and the NI MHDDK (comments in example code). + * There is no one place to find the various valid values of the registers. + * 2) The register values are _NOT_ completely consistent. There is no way to + * gain any sense of intuition of which values, or even enums one should use + * for various registers. There was some attempt in prior use of comedi to + * name enums such that a user might know which enums should be used for + * varying purposes, but the end-user had to gain a knowledge of register + * values to correctly wield this approach. + * 3) The names for signals and registers found in the various register level + * programming manuals and vendor-provided documentation are _not_ even + * close to the same names that are in the end-user documentation. + * + * Similar, albeit less, confusion plagued NI's previous version of their own + * drivers. Earlier than 2003, NI greatly simplified the situation for users + * by releasing a new API that abstracted the names of signals/terminals to a + * common and intuitive set of names. + * + * The names below mirror the names chosen and well documented by NI. These + * names are exposed to the user via the comedilib user library. By keeping + * the names below, in spite of the use of CamelScript, maintenance will be + * greatly eased and confusion for users _and_ comedi developers will be + * greatly reduced. + */ + +/* + * Base of abstracted NI names. + * The first 16 bits of *_arg are reserved for channel selection. + * Since we only actually need the first 4 or 5 bits for all register values on + * NI select registers anyways, we'll identify all values >= (1<<15) as being an + * abstracted NI signal/terminal name. + * These values are also used/returned by INSN_DEVICE_CONFIG_TEST_ROUTE, + * INSN_DEVICE_CONFIG_CONNECT_ROUTE, INSN_DEVICE_CONFIG_DISCONNECT_ROUTE, + * and INSN_DEVICE_CONFIG_GET_ROUTES. + */ +#define NI_NAMES_BASE 0x8000u + +#define _TERM_N(base, n, x) ((base) + ((x) & ((n) - 1))) + +/* + * not necessarily all allowed 64 PFIs are valid--certainly not for all devices + */ +#define NI_PFI(x) _TERM_N(NI_NAMES_BASE, 64, x) +/* 8 trigger lines by standard, Some devices cannot talk to all eight. */ +#define TRIGGER_LINE(x) _TERM_N(NI_PFI(-1) + 1, 8, x) +/* 4 RTSI shared MUXes to route signals to/from TRIGGER_LINES on NI hardware */ +#define NI_RTSI_BRD(x) _TERM_N(TRIGGER_LINE(-1) + 1, 4, x) + +/* *** Counter/timer names : 8 counters max *** */ +#define NI_MAX_COUNTERS 8 +#define NI_COUNTER_NAMES_BASE (NI_RTSI_BRD(-1) + 1) +#define NI_CtrSource(x) _TERM_N(NI_COUNTER_NAMES_BASE, NI_MAX_COUNTERS, x) +/* Gate, Aux, A,B,Z are all treated, at times as gates */ +#define NI_GATES_NAMES_BASE (NI_CtrSource(-1) + 1) +#define NI_CtrGate(x) _TERM_N(NI_GATES_NAMES_BASE, NI_MAX_COUNTERS, x) +#define NI_CtrAux(x) _TERM_N(NI_CtrGate(-1) + 1, NI_MAX_COUNTERS, x) +#define NI_CtrA(x) _TERM_N(NI_CtrAux(-1) + 1, NI_MAX_COUNTERS, x) +#define NI_CtrB(x) _TERM_N(NI_CtrA(-1) + 1, NI_MAX_COUNTERS, x) +#define NI_CtrZ(x) _TERM_N(NI_CtrB(-1) + 1, NI_MAX_COUNTERS, x) +#define NI_GATES_NAMES_MAX NI_CtrZ(-1) +#define NI_CtrArmStartTrigger(x) _TERM_N(NI_CtrZ(-1) + 1, NI_MAX_COUNTERS, x) +#define NI_CtrInternalOutput(x) \ + _TERM_N(NI_CtrArmStartTrigger(-1) + 1, NI_MAX_COUNTERS, x) +/** external pin(s) labeled conveniently as CtrOut. */ +#define NI_CtrOut(x) _TERM_N(NI_CtrInternalOutput(-1) + 1, NI_MAX_COUNTERS, x) +/** For Buffered sampling of ctr -- x series capability. */ +#define NI_CtrSampleClock(x) _TERM_N(NI_CtrOut(-1) + 1, NI_MAX_COUNTERS, x) +#define NI_COUNTER_NAMES_MAX NI_CtrSampleClock(-1) + +enum ni_common_signal_names { + /* PXI_Star: this is a non-NI-specific signal */ + PXI_Star = NI_COUNTER_NAMES_MAX + 1, + PXI_Clk10, + PXIe_Clk100, + NI_AI_SampleClock, + NI_AI_SampleClockTimebase, + NI_AI_StartTrigger, + NI_AI_ReferenceTrigger, + NI_AI_ConvertClock, + NI_AI_ConvertClockTimebase, + NI_AI_PauseTrigger, + NI_AI_HoldCompleteEvent, + NI_AI_HoldComplete, + NI_AI_ExternalMUXClock, + NI_AI_STOP, /* pulse signal that occurs when a update is finished(?) */ + NI_AO_SampleClock, + NI_AO_SampleClockTimebase, + NI_AO_StartTrigger, + NI_AO_PauseTrigger, + NI_DI_SampleClock, + NI_DI_SampleClockTimebase, + NI_DI_StartTrigger, + NI_DI_ReferenceTrigger, + NI_DI_PauseTrigger, + NI_DI_InputBufferFull, + NI_DI_ReadyForStartEvent, + NI_DI_ReadyForTransferEventBurst, + NI_DI_ReadyForTransferEventPipelined, + NI_DO_SampleClock, + NI_DO_SampleClockTimebase, + NI_DO_StartTrigger, + NI_DO_PauseTrigger, + NI_DO_OutputBufferFull, + NI_DO_DataActiveEvent, + NI_DO_ReadyForStartEvent, + NI_DO_ReadyForTransferEvent, + NI_MasterTimebase, + NI_20MHzTimebase, + NI_80MHzTimebase, + NI_100MHzTimebase, + NI_200MHzTimebase, + NI_100kHzTimebase, + NI_10MHzRefClock, + NI_FrequencyOutput, + NI_ChangeDetectionEvent, + NI_AnalogComparisonEvent, + NI_WatchdogExpiredEvent, + NI_WatchdogExpirationTrigger, + NI_SCXI_Trig1, + NI_LogicLow, + NI_LogicHigh, + NI_ExternalStrobe, + NI_PFI_DO, + NI_CaseGround, + /* special internal signal used as variable source for RTSI bus: */ + NI_RGOUT0, + + /* just a name to make the next more convenient, regardless of above */ + _NI_NAMES_MAX_PLUS_1, + NI_NUM_NAMES = _NI_NAMES_MAX_PLUS_1 - NI_NAMES_BASE, +}; + +/* *** END GLOBALLY-NAMED NI TERMINALS/SIGNALS *** */ + +#define NI_USUAL_PFI_SELECT(x) (((x) < 10) ? (0x1 + (x)) : (0xb + (x))) +#define NI_USUAL_RTSI_SELECT(x) (((x) < 7) ? (0xb + (x)) : 0x1b) + +/* + * mode bits for NI general-purpose counters, set with + * INSN_CONFIG_SET_COUNTER_MODE + */ +#define NI_GPCT_COUNTING_MODE_SHIFT 16 +#define NI_GPCT_INDEX_PHASE_BITSHIFT 20 +#define NI_GPCT_COUNTING_DIRECTION_SHIFT 24 +enum ni_gpct_mode_bits { + NI_GPCT_GATE_ON_BOTH_EDGES_BIT = 0x4, + NI_GPCT_EDGE_GATE_MODE_MASK = 0x18, + NI_GPCT_EDGE_GATE_STARTS_STOPS_BITS = 0x0, + NI_GPCT_EDGE_GATE_STOPS_STARTS_BITS = 0x8, + NI_GPCT_EDGE_GATE_STARTS_BITS = 0x10, + NI_GPCT_EDGE_GATE_NO_STARTS_NO_STOPS_BITS = 0x18, + NI_GPCT_STOP_MODE_MASK = 0x60, + NI_GPCT_STOP_ON_GATE_BITS = 0x00, + NI_GPCT_STOP_ON_GATE_OR_TC_BITS = 0x20, + NI_GPCT_STOP_ON_GATE_OR_SECOND_TC_BITS = 0x40, + NI_GPCT_LOAD_B_SELECT_BIT = 0x80, + NI_GPCT_OUTPUT_MODE_MASK = 0x300, + NI_GPCT_OUTPUT_TC_PULSE_BITS = 0x100, + NI_GPCT_OUTPUT_TC_TOGGLE_BITS = 0x200, + NI_GPCT_OUTPUT_TC_OR_GATE_TOGGLE_BITS = 0x300, + NI_GPCT_HARDWARE_DISARM_MASK = 0xc00, + NI_GPCT_NO_HARDWARE_DISARM_BITS = 0x000, + NI_GPCT_DISARM_AT_TC_BITS = 0x400, + NI_GPCT_DISARM_AT_GATE_BITS = 0x800, + NI_GPCT_DISARM_AT_TC_OR_GATE_BITS = 0xc00, + NI_GPCT_LOADING_ON_TC_BIT = 0x1000, + NI_GPCT_LOADING_ON_GATE_BIT = 0x4000, + NI_GPCT_COUNTING_MODE_MASK = 0x7 << NI_GPCT_COUNTING_MODE_SHIFT, + NI_GPCT_COUNTING_MODE_NORMAL_BITS = + 0x0 << NI_GPCT_COUNTING_MODE_SHIFT, + NI_GPCT_COUNTING_MODE_QUADRATURE_X1_BITS = + 0x1 << NI_GPCT_COUNTING_MODE_SHIFT, + NI_GPCT_COUNTING_MODE_QUADRATURE_X2_BITS = + 0x2 << NI_GPCT_COUNTING_MODE_SHIFT, + NI_GPCT_COUNTING_MODE_QUADRATURE_X4_BITS = + 0x3 << NI_GPCT_COUNTING_MODE_SHIFT, + NI_GPCT_COUNTING_MODE_TWO_PULSE_BITS = + 0x4 << NI_GPCT_COUNTING_MODE_SHIFT, + NI_GPCT_COUNTING_MODE_SYNC_SOURCE_BITS = + 0x6 << NI_GPCT_COUNTING_MODE_SHIFT, + NI_GPCT_INDEX_PHASE_MASK = 0x3 << NI_GPCT_INDEX_PHASE_BITSHIFT, + NI_GPCT_INDEX_PHASE_LOW_A_LOW_B_BITS = + 0x0 << NI_GPCT_INDEX_PHASE_BITSHIFT, + NI_GPCT_INDEX_PHASE_LOW_A_HIGH_B_BITS = + 0x1 << NI_GPCT_INDEX_PHASE_BITSHIFT, + NI_GPCT_INDEX_PHASE_HIGH_A_LOW_B_BITS = + 0x2 << NI_GPCT_INDEX_PHASE_BITSHIFT, + NI_GPCT_INDEX_PHASE_HIGH_A_HIGH_B_BITS = + 0x3 << NI_GPCT_INDEX_PHASE_BITSHIFT, + NI_GPCT_INDEX_ENABLE_BIT = 0x400000, + NI_GPCT_COUNTING_DIRECTION_MASK = + 0x3 << NI_GPCT_COUNTING_DIRECTION_SHIFT, + NI_GPCT_COUNTING_DIRECTION_DOWN_BITS = + 0x00 << NI_GPCT_COUNTING_DIRECTION_SHIFT, + NI_GPCT_COUNTING_DIRECTION_UP_BITS = + 0x1 << NI_GPCT_COUNTING_DIRECTION_SHIFT, + NI_GPCT_COUNTING_DIRECTION_HW_UP_DOWN_BITS = + 0x2 << NI_GPCT_COUNTING_DIRECTION_SHIFT, + NI_GPCT_COUNTING_DIRECTION_HW_GATE_BITS = + 0x3 << NI_GPCT_COUNTING_DIRECTION_SHIFT, + NI_GPCT_RELOAD_SOURCE_MASK = 0xc000000, + NI_GPCT_RELOAD_SOURCE_FIXED_BITS = 0x0, + NI_GPCT_RELOAD_SOURCE_SWITCHING_BITS = 0x4000000, + NI_GPCT_RELOAD_SOURCE_GATE_SELECT_BITS = 0x8000000, + NI_GPCT_OR_GATE_BIT = 0x10000000, + NI_GPCT_INVERT_OUTPUT_BIT = 0x20000000 +}; + +/* + * Bits for setting a clock source with + * INSN_CONFIG_SET_CLOCK_SRC when using NI general-purpose counters. + */ +enum ni_gpct_clock_source_bits { + NI_GPCT_CLOCK_SRC_SELECT_MASK = 0x3f, + NI_GPCT_TIMEBASE_1_CLOCK_SRC_BITS = 0x0, + NI_GPCT_TIMEBASE_2_CLOCK_SRC_BITS = 0x1, + NI_GPCT_TIMEBASE_3_CLOCK_SRC_BITS = 0x2, + NI_GPCT_LOGIC_LOW_CLOCK_SRC_BITS = 0x3, + NI_GPCT_NEXT_GATE_CLOCK_SRC_BITS = 0x4, + NI_GPCT_NEXT_TC_CLOCK_SRC_BITS = 0x5, + /* NI 660x-specific */ + NI_GPCT_SOURCE_PIN_i_CLOCK_SRC_BITS = 0x6, + NI_GPCT_PXI10_CLOCK_SRC_BITS = 0x7, + NI_GPCT_PXI_STAR_TRIGGER_CLOCK_SRC_BITS = 0x8, + NI_GPCT_ANALOG_TRIGGER_OUT_CLOCK_SRC_BITS = 0x9, + NI_GPCT_PRESCALE_MODE_CLOCK_SRC_MASK = 0x30000000, + NI_GPCT_NO_PRESCALE_CLOCK_SRC_BITS = 0x0, + /* divide source by 2 */ + NI_GPCT_PRESCALE_X2_CLOCK_SRC_BITS = 0x10000000, + /* divide source by 8 */ + NI_GPCT_PRESCALE_X8_CLOCK_SRC_BITS = 0x20000000, + NI_GPCT_INVERT_CLOCK_SRC_BIT = 0x80000000 +}; + +/* NI 660x-specific */ +#define NI_GPCT_SOURCE_PIN_CLOCK_SRC_BITS(x) (0x10 + (x)) + +#define NI_GPCT_RTSI_CLOCK_SRC_BITS(x) (0x18 + (x)) + +/* no pfi on NI 660x */ +#define NI_GPCT_PFI_CLOCK_SRC_BITS(x) (0x20 + (x)) + +/* + * Possibilities for setting a gate source with + * INSN_CONFIG_SET_GATE_SRC when using NI general-purpose counters. + * May be bitwise-or'd with CR_EDGE or CR_INVERT. + */ +enum ni_gpct_gate_select { + /* m-series gates */ + NI_GPCT_TIMESTAMP_MUX_GATE_SELECT = 0x0, + NI_GPCT_AI_START2_GATE_SELECT = 0x12, + NI_GPCT_PXI_STAR_TRIGGER_GATE_SELECT = 0x13, + NI_GPCT_NEXT_OUT_GATE_SELECT = 0x14, + NI_GPCT_AI_START1_GATE_SELECT = 0x1c, + NI_GPCT_NEXT_SOURCE_GATE_SELECT = 0x1d, + NI_GPCT_ANALOG_TRIGGER_OUT_GATE_SELECT = 0x1e, + NI_GPCT_LOGIC_LOW_GATE_SELECT = 0x1f, + /* more gates for 660x */ + NI_GPCT_SOURCE_PIN_i_GATE_SELECT = 0x100, + NI_GPCT_GATE_PIN_i_GATE_SELECT = 0x101, + /* more gates for 660x "second gate" */ + NI_GPCT_UP_DOWN_PIN_i_GATE_SELECT = 0x201, + NI_GPCT_SELECTED_GATE_GATE_SELECT = 0x21e, + /* + * m-series "second gate" sources are unknown, + * we should add them here with an offset of 0x300 when + * known. + */ + NI_GPCT_DISABLED_GATE_SELECT = 0x8000, +}; + +#define NI_GPCT_GATE_PIN_GATE_SELECT(x) (0x102 + (x)) +#define NI_GPCT_RTSI_GATE_SELECT(x) NI_USUAL_RTSI_SELECT(x) +#define NI_GPCT_PFI_GATE_SELECT(x) NI_USUAL_PFI_SELECT(x) +#define NI_GPCT_UP_DOWN_PIN_GATE_SELECT(x) (0x202 + (x)) + +/* + * Possibilities for setting a source with + * INSN_CONFIG_SET_OTHER_SRC when using NI general-purpose counters. + */ +enum ni_gpct_other_index { + NI_GPCT_SOURCE_ENCODER_A, + NI_GPCT_SOURCE_ENCODER_B, + NI_GPCT_SOURCE_ENCODER_Z +}; + +enum ni_gpct_other_select { + /* m-series gates */ + /* Still unknown, probably only need NI_GPCT_PFI_OTHER_SELECT */ + NI_GPCT_DISABLED_OTHER_SELECT = 0x8000, +}; + +#define NI_GPCT_PFI_OTHER_SELECT(x) NI_USUAL_PFI_SELECT(x) + +/* + * start sources for ni general-purpose counters for use with + * INSN_CONFIG_ARM + */ +enum ni_gpct_arm_source { + NI_GPCT_ARM_IMMEDIATE = 0x0, + /* + * Start both the counter and the adjacent paired counter simultaneously + */ + NI_GPCT_ARM_PAIRED_IMMEDIATE = 0x1, + /* + * If the NI_GPCT_HW_ARM bit is set, we will pass the least significant + * bits (3 bits for 660x or 5 bits for m-series) through to the + * hardware. To select a hardware trigger, pass the appropriate select + * bit, e.g., + * NI_GPCT_HW_ARM | NI_GPCT_AI_START1_GATE_SELECT or + * NI_GPCT_HW_ARM | NI_GPCT_PFI_GATE_SELECT(pfi_number) + */ + NI_GPCT_HW_ARM = 0x1000, + NI_GPCT_ARM_UNKNOWN = NI_GPCT_HW_ARM, /* for backward compatibility */ +}; + +/* digital filtering options for ni 660x for use with INSN_CONFIG_FILTER. */ +enum ni_gpct_filter_select { + NI_GPCT_FILTER_OFF = 0x0, + NI_GPCT_FILTER_TIMEBASE_3_SYNC = 0x1, + NI_GPCT_FILTER_100x_TIMEBASE_1 = 0x2, + NI_GPCT_FILTER_20x_TIMEBASE_1 = 0x3, + NI_GPCT_FILTER_10x_TIMEBASE_1 = 0x4, + NI_GPCT_FILTER_2x_TIMEBASE_1 = 0x5, + NI_GPCT_FILTER_2x_TIMEBASE_3 = 0x6 +}; + +/* + * PFI digital filtering options for ni m-series for use with + * INSN_CONFIG_FILTER. + */ +enum ni_pfi_filter_select { + NI_PFI_FILTER_OFF = 0x0, + NI_PFI_FILTER_125ns = 0x1, + NI_PFI_FILTER_6425ns = 0x2, + NI_PFI_FILTER_2550us = 0x3 +}; + +/* master clock sources for ni mio boards and INSN_CONFIG_SET_CLOCK_SRC */ +enum ni_mio_clock_source { + NI_MIO_INTERNAL_CLOCK = 0, + /* + * Doesn't work for m-series, use NI_MIO_PLL_RTSI_CLOCK() + * the NI_MIO_PLL_* sources are m-series only + */ + NI_MIO_RTSI_CLOCK = 1, + NI_MIO_PLL_PXI_STAR_TRIGGER_CLOCK = 2, + NI_MIO_PLL_PXI10_CLOCK = 3, + NI_MIO_PLL_RTSI0_CLOCK = 4 +}; + +#define NI_MIO_PLL_RTSI_CLOCK(x) (NI_MIO_PLL_RTSI0_CLOCK + (x)) + +/* + * Signals which can be routed to an NI RTSI pin with INSN_CONFIG_SET_ROUTING. + * The numbers assigned are not arbitrary, they correspond to the bits required + * to program the board. + */ +enum ni_rtsi_routing { + NI_RTSI_OUTPUT_ADR_START1 = 0, + NI_RTSI_OUTPUT_ADR_START2 = 1, + NI_RTSI_OUTPUT_SCLKG = 2, + NI_RTSI_OUTPUT_DACUPDN = 3, + NI_RTSI_OUTPUT_DA_START1 = 4, + NI_RTSI_OUTPUT_G_SRC0 = 5, + NI_RTSI_OUTPUT_G_GATE0 = 6, + NI_RTSI_OUTPUT_RGOUT0 = 7, + NI_RTSI_OUTPUT_RTSI_BRD_0 = 8, + /* Pre-m-series always have RTSI clock on line 7 */ + NI_RTSI_OUTPUT_RTSI_OSC = 12 +}; + +#define NI_RTSI_OUTPUT_RTSI_BRD(x) (NI_RTSI_OUTPUT_RTSI_BRD_0 + (x)) + +/* + * Signals which can be routed to an NI PFI pin on an m-series board with + * INSN_CONFIG_SET_ROUTING. These numbers are also returned by + * INSN_CONFIG_GET_ROUTING on pre-m-series boards, even though their routing + * cannot be changed. The numbers assigned are not arbitrary, they correspond + * to the bits required to program the board. + */ +enum ni_pfi_routing { + NI_PFI_OUTPUT_PFI_DEFAULT = 0, + NI_PFI_OUTPUT_AI_START1 = 1, + NI_PFI_OUTPUT_AI_START2 = 2, + NI_PFI_OUTPUT_AI_CONVERT = 3, + NI_PFI_OUTPUT_G_SRC1 = 4, + NI_PFI_OUTPUT_G_GATE1 = 5, + NI_PFI_OUTPUT_AO_UPDATE_N = 6, + NI_PFI_OUTPUT_AO_START1 = 7, + NI_PFI_OUTPUT_AI_START_PULSE = 8, + NI_PFI_OUTPUT_G_SRC0 = 9, + NI_PFI_OUTPUT_G_GATE0 = 10, + NI_PFI_OUTPUT_EXT_STROBE = 11, + NI_PFI_OUTPUT_AI_EXT_MUX_CLK = 12, + NI_PFI_OUTPUT_GOUT0 = 13, + NI_PFI_OUTPUT_GOUT1 = 14, + NI_PFI_OUTPUT_FREQ_OUT = 15, + NI_PFI_OUTPUT_PFI_DO = 16, + NI_PFI_OUTPUT_I_ATRIG = 17, + NI_PFI_OUTPUT_RTSI0 = 18, + NI_PFI_OUTPUT_PXI_STAR_TRIGGER_IN = 26, + NI_PFI_OUTPUT_SCXI_TRIG1 = 27, + NI_PFI_OUTPUT_DIO_CHANGE_DETECT_RTSI = 28, + NI_PFI_OUTPUT_CDI_SAMPLE = 29, + NI_PFI_OUTPUT_CDO_UPDATE = 30 +}; + +#define NI_PFI_OUTPUT_RTSI(x) (NI_PFI_OUTPUT_RTSI0 + (x)) + +/* + * Signals which can be routed to output on a NI PFI pin on a 660x board + * with INSN_CONFIG_SET_ROUTING. The numbers assigned are + * not arbitrary, they correspond to the bits required + * to program the board. Lines 0 to 7 can only be set to + * NI_660X_PFI_OUTPUT_DIO. Lines 32 to 39 can only be set to + * NI_660X_PFI_OUTPUT_COUNTER. + */ +enum ni_660x_pfi_routing { + NI_660X_PFI_OUTPUT_COUNTER = 1, /* counter */ + NI_660X_PFI_OUTPUT_DIO = 2, /* static digital output */ +}; + +/* + * NI External Trigger lines. These values are not arbitrary, but are related + * to the bits required to program the board (offset by 1 for historical + * reasons). + */ +#define NI_EXT_PFI(x) (NI_USUAL_PFI_SELECT(x) - 1) +#define NI_EXT_RTSI(x) (NI_USUAL_RTSI_SELECT(x) - 1) + +/* + * Clock sources for CDIO subdevice on NI m-series boards. Used as the + * scan_begin_arg for a comedi_command. These sources may also be bitwise-or'd + * with CR_INVERT to change polarity. + */ +enum ni_m_series_cdio_scan_begin_src { + NI_CDIO_SCAN_BEGIN_SRC_GROUND = 0, + NI_CDIO_SCAN_BEGIN_SRC_AI_START = 18, + NI_CDIO_SCAN_BEGIN_SRC_AI_CONVERT = 19, + NI_CDIO_SCAN_BEGIN_SRC_PXI_STAR_TRIGGER = 20, + NI_CDIO_SCAN_BEGIN_SRC_G0_OUT = 28, + NI_CDIO_SCAN_BEGIN_SRC_G1_OUT = 29, + NI_CDIO_SCAN_BEGIN_SRC_ANALOG_TRIGGER = 30, + NI_CDIO_SCAN_BEGIN_SRC_AO_UPDATE = 31, + NI_CDIO_SCAN_BEGIN_SRC_FREQ_OUT = 32, + NI_CDIO_SCAN_BEGIN_SRC_DIO_CHANGE_DETECT_IRQ = 33 +}; + +#define NI_CDIO_SCAN_BEGIN_SRC_PFI(x) NI_USUAL_PFI_SELECT(x) +#define NI_CDIO_SCAN_BEGIN_SRC_RTSI(x) NI_USUAL_RTSI_SELECT(x) + +/* + * scan_begin_src for scan_begin_arg==TRIG_EXT with analog output command on NI + * boards. These scan begin sources can also be bitwise-or'd with CR_INVERT to + * change polarity. + */ +#define NI_AO_SCAN_BEGIN_SRC_PFI(x) NI_USUAL_PFI_SELECT(x) +#define NI_AO_SCAN_BEGIN_SRC_RTSI(x) NI_USUAL_RTSI_SELECT(x) + +/* + * Bits for setting a clock source with + * INSN_CONFIG_SET_CLOCK_SRC when using NI frequency output subdevice. + */ +enum ni_freq_out_clock_source_bits { + NI_FREQ_OUT_TIMEBASE_1_DIV_2_CLOCK_SRC, /* 10 MHz */ + NI_FREQ_OUT_TIMEBASE_2_CLOCK_SRC /* 100 KHz */ +}; + +/* + * Values for setting a clock source with INSN_CONFIG_SET_CLOCK_SRC for + * 8254 counter subdevices on Amplicon DIO boards (amplc_dio200 driver). + */ +enum amplc_dio_clock_source { + /* + * Per channel external clock + * input/output pin (pin is only an + * input when clock source set to this value, + * otherwise it is an output) + */ + AMPLC_DIO_CLK_CLKN, + AMPLC_DIO_CLK_10MHZ, /* 10 MHz internal clock */ + AMPLC_DIO_CLK_1MHZ, /* 1 MHz internal clock */ + AMPLC_DIO_CLK_100KHZ, /* 100 kHz internal clock */ + AMPLC_DIO_CLK_10KHZ, /* 10 kHz internal clock */ + AMPLC_DIO_CLK_1KHZ, /* 1 kHz internal clock */ + /* + * Output of preceding counter channel + * (for channel 0, preceding counter + * channel is channel 2 on preceding + * counter subdevice, for first counter + * subdevice, preceding counter + * subdevice is the last counter + * subdevice) + */ + AMPLC_DIO_CLK_OUTNM1, + AMPLC_DIO_CLK_EXT, /* per chip external input pin */ + /* the following are "enhanced" clock sources for PCIe models */ + AMPLC_DIO_CLK_VCC, /* clock input HIGH */ + AMPLC_DIO_CLK_GND, /* clock input LOW */ + AMPLC_DIO_CLK_PAT_PRESENT, /* "pattern present" signal */ + AMPLC_DIO_CLK_20MHZ /* 20 MHz internal clock */ +}; + +/* + * Values for setting a clock source with INSN_CONFIG_SET_CLOCK_SRC for + * timer subdevice on some Amplicon DIO PCIe boards (amplc_dio200 driver). + */ +enum amplc_dio_ts_clock_src { + AMPLC_DIO_TS_CLK_1GHZ, /* 1 ns period with 20 ns granularity */ + AMPLC_DIO_TS_CLK_1MHZ, /* 1 us period */ + AMPLC_DIO_TS_CLK_1KHZ /* 1 ms period */ +}; + +/* + * Values for setting a gate source with INSN_CONFIG_SET_GATE_SRC for + * 8254 counter subdevices on Amplicon DIO boards (amplc_dio200 driver). + */ +enum amplc_dio_gate_source { + AMPLC_DIO_GAT_VCC, /* internal high logic level */ + AMPLC_DIO_GAT_GND, /* internal low logic level */ + AMPLC_DIO_GAT_GATN, /* per channel external gate input */ + /* + * negated output of counter channel minus 2 + * (for channels 0 or 1, channel minus 2 is channel 1 or 2 on + * the preceding counter subdevice, for the first counter subdevice + * the preceding counter subdevice is the last counter subdevice) + */ + AMPLC_DIO_GAT_NOUTNM2, + AMPLC_DIO_GAT_RESERVED4, + AMPLC_DIO_GAT_RESERVED5, + AMPLC_DIO_GAT_RESERVED6, + AMPLC_DIO_GAT_RESERVED7, + /* the following are "enhanced" gate sources for PCIe models */ + AMPLC_DIO_GAT_NGATN = 6, /* negated per channel gate input */ + /* non-negated output of counter channel minus 2 */ + AMPLC_DIO_GAT_OUTNM2, + AMPLC_DIO_GAT_PAT_PRESENT, /* "pattern present" signal */ + AMPLC_DIO_GAT_PAT_OCCURRED, /* "pattern occurred" latched */ + AMPLC_DIO_GAT_PAT_GONE, /* "pattern gone away" latched */ + AMPLC_DIO_GAT_NPAT_PRESENT, /* negated "pattern present" */ + AMPLC_DIO_GAT_NPAT_OCCURRED, /* negated "pattern occurred" */ + AMPLC_DIO_GAT_NPAT_GONE /* negated "pattern gone away" */ +}; + +/* + * Values for setting a clock source with INSN_CONFIG_SET_CLOCK_SRC for + * the counter subdevice on the Kolter Electronic PCI-Counter board + * (ke_counter driver). + */ +enum ke_counter_clock_source { + KE_CLK_20MHZ, /* internal 20MHz (default) */ + KE_CLK_4MHZ, /* internal 4MHz (option) */ + KE_CLK_EXT /* external clock on pin 21 of D-Sub */ +}; + +#endif /* _COMEDI_H */ diff --git a/linux-headers/include/linux/connector.h b/linux-headers/include/linux/connector.h index 9bd9d50e6f9..026b3dd8dcc 100644 --- a/linux-headers/include/linux/connector.h +++ b/linux-headers/include/linux/connector.h @@ -75,7 +75,7 @@ struct cn_msg { __u16 len; /* Length of the following data */ __u16 flags; - __u8 data[0]; + __u8 data[]; }; #endif /* __CONNECTOR_H */ diff --git a/linux-headers/include/linux/const.h b/linux-headers/include/linux/const.h index 5e489872516..1eb84b5087f 100644 --- a/linux-headers/include/linux/const.h +++ b/linux-headers/include/linux/const.h @@ -28,7 +28,7 @@ #define _BITUL(x) (_UL(1) << (x)) #define _BITULL(x) (_ULL(1) << (x)) -#define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1) +#define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (__typeof__(x))(a) - 1) #define __ALIGN_KERNEL_MASK(x, mask) (((x) + (mask)) & ~(mask)) #define __KERNEL_DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d)) diff --git a/linux-headers/include/linux/counter.h b/linux-headers/include/linux/counter.h new file mode 100644 index 00000000000..2d9befeb960 --- /dev/null +++ b/linux-headers/include/linux/counter.h @@ -0,0 +1,170 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Userspace ABI for Counter character devices + * Copyright (C) 2020 William Breathitt Gray + */ +#ifndef _COUNTER_H_ +#define _COUNTER_H_ + +#include +#include + +/* Component type definitions */ +enum counter_component_type { + COUNTER_COMPONENT_NONE, + COUNTER_COMPONENT_SIGNAL, + COUNTER_COMPONENT_COUNT, + COUNTER_COMPONENT_FUNCTION, + COUNTER_COMPONENT_SYNAPSE_ACTION, + COUNTER_COMPONENT_EXTENSION, +}; + +/* Component scope definitions */ +enum counter_scope { + COUNTER_SCOPE_DEVICE, + COUNTER_SCOPE_SIGNAL, + COUNTER_SCOPE_COUNT, +}; + +/** + * struct counter_component - Counter component identification + * @type: component type (one of enum counter_component_type) + * @scope: component scope (one of enum counter_scope) + * @parent: parent ID (matching the ID suffix of the respective parent sysfs + * path as described by the ABI documentation file + * Documentation/ABI/testing/sysfs-bus-counter) + * @id: component ID (matching the ID provided by the respective *_component_id + * sysfs attribute of the desired component) + * + * For example, if the Count 2 ceiling extension of Counter device 4 is desired, + * set type equal to COUNTER_COMPONENT_EXTENSION, scope equal to + * COUNTER_COUNT_SCOPE, parent equal to 2, and id equal to the value provided by + * the respective /sys/bus/counter/devices/counter4/count2/ceiling_component_id + * sysfs attribute. + */ +struct counter_component { + __u8 type; + __u8 scope; + __u8 parent; + __u8 id; +}; + +/* Event type definitions */ +enum counter_event_type { + /* Count value increased past ceiling */ + COUNTER_EVENT_OVERFLOW, + /* Count value decreased past floor */ + COUNTER_EVENT_UNDERFLOW, + /* Count value increased past ceiling, or decreased past floor */ + COUNTER_EVENT_OVERFLOW_UNDERFLOW, + /* Count value reached threshold */ + COUNTER_EVENT_THRESHOLD, + /* Index signal detected */ + COUNTER_EVENT_INDEX, + /* State of counter is changed */ + COUNTER_EVENT_CHANGE_OF_STATE, + /* Count value captured */ + COUNTER_EVENT_CAPTURE, +}; + +/** + * struct counter_watch - Counter component watch configuration + * @component: component to watch when event triggers + * @event: event that triggers (one of enum counter_event_type) + * @channel: event channel (typically 0 unless the device supports concurrent + * events of the same type) + */ +struct counter_watch { + struct counter_component component; + __u8 event; + __u8 channel; +}; + +/* + * Queues a Counter watch for the specified event. + * + * The queued watches will not be applied until COUNTER_ENABLE_EVENTS_IOCTL is + * called. + */ +#define COUNTER_ADD_WATCH_IOCTL _IOW(0x3E, 0x00, struct counter_watch) +/* + * Enables monitoring the events specified by the Counter watches that were + * queued by COUNTER_ADD_WATCH_IOCTL. + * + * If events are already enabled, the new set of watches replaces the old one. + * Calling this ioctl also has the effect of clearing the queue of watches added + * by COUNTER_ADD_WATCH_IOCTL. + */ +#define COUNTER_ENABLE_EVENTS_IOCTL _IO(0x3E, 0x01) +/* + * Stops monitoring the previously enabled events. + */ +#define COUNTER_DISABLE_EVENTS_IOCTL _IO(0x3E, 0x02) + +/** + * struct counter_event - Counter event data + * @timestamp: best estimate of time of event occurrence, in nanoseconds + * @value: component value + * @watch: component watch configuration + * @status: return status (system error number) + */ +struct counter_event { + __aligned_u64 timestamp; + __aligned_u64 value; + struct counter_watch watch; + __u8 status; +}; + +/* Count direction values */ +enum counter_count_direction { + COUNTER_COUNT_DIRECTION_FORWARD, + COUNTER_COUNT_DIRECTION_BACKWARD, +}; + +/* Count mode values */ +enum counter_count_mode { + COUNTER_COUNT_MODE_NORMAL, + COUNTER_COUNT_MODE_RANGE_LIMIT, + COUNTER_COUNT_MODE_NON_RECYCLE, + COUNTER_COUNT_MODE_MODULO_N, + COUNTER_COUNT_MODE_INTERRUPT_ON_TERMINAL_COUNT, + COUNTER_COUNT_MODE_HARDWARE_RETRIGGERABLE_ONESHOT, + COUNTER_COUNT_MODE_RATE_GENERATOR, + COUNTER_COUNT_MODE_SQUARE_WAVE_MODE, + COUNTER_COUNT_MODE_SOFTWARE_TRIGGERED_STROBE, + COUNTER_COUNT_MODE_HARDWARE_TRIGGERED_STROBE, +}; + +/* Count function values */ +enum counter_function { + COUNTER_FUNCTION_INCREASE, + COUNTER_FUNCTION_DECREASE, + COUNTER_FUNCTION_PULSE_DIRECTION, + COUNTER_FUNCTION_QUADRATURE_X1_A, + COUNTER_FUNCTION_QUADRATURE_X1_B, + COUNTER_FUNCTION_QUADRATURE_X2_A, + COUNTER_FUNCTION_QUADRATURE_X2_B, + COUNTER_FUNCTION_QUADRATURE_X4, +}; + +/* Signal values */ +enum counter_signal_level { + COUNTER_SIGNAL_LEVEL_LOW, + COUNTER_SIGNAL_LEVEL_HIGH, +}; + +/* Action mode values */ +enum counter_synapse_action { + COUNTER_SYNAPSE_ACTION_NONE, + COUNTER_SYNAPSE_ACTION_RISING_EDGE, + COUNTER_SYNAPSE_ACTION_FALLING_EDGE, + COUNTER_SYNAPSE_ACTION_BOTH_EDGES, +}; + +/* Signal polarity values */ +enum counter_signal_polarity { + COUNTER_SIGNAL_POLARITY_POSITIVE, + COUNTER_SIGNAL_POLARITY_NEGATIVE, +}; + +#endif /* _COUNTER_H_ */ diff --git a/linux-headers/include/linux/cxl_mem.h b/linux-headers/include/linux/cxl_mem.h new file mode 100644 index 00000000000..9a641dd2931 --- /dev/null +++ b/linux-headers/include/linux/cxl_mem.h @@ -0,0 +1,229 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * CXL IOCTLs for Memory Devices + */ + +#ifndef _CXL_MEM_H_ +#define _CXL_MEM_H_ + +#include + +/** + * DOC: UAPI + * + * Not all of the commands that the driver supports are available for use by + * userspace at all times. Userspace can check the result of the QUERY command + * to determine the live set of commands. Alternatively, it can issue the + * command and check for failure. + */ + +#define CXL_MEM_QUERY_COMMANDS _IOR(0xCE, 1, struct cxl_mem_query_commands) +#define CXL_MEM_SEND_COMMAND _IOWR(0xCE, 2, struct cxl_send_command) + +/* + * NOTE: New defines must be added to the end of the list to preserve + * compatibility because this enum is exported to user space. + */ +#define CXL_CMDS \ + ___C(INVALID, "Invalid Command"), \ + ___C(IDENTIFY, "Identify Command"), \ + ___C(RAW, "Raw device command"), \ + ___C(GET_SUPPORTED_LOGS, "Get Supported Logs"), \ + ___C(GET_FW_INFO, "Get FW Info"), \ + ___C(GET_PARTITION_INFO, "Get Partition Information"), \ + ___C(GET_LSA, "Get Label Storage Area"), \ + ___C(GET_HEALTH_INFO, "Get Health Info"), \ + ___C(GET_LOG, "Get Log"), \ + ___C(SET_PARTITION_INFO, "Set Partition Information"), \ + ___C(SET_LSA, "Set Label Storage Area"), \ + ___C(GET_ALERT_CONFIG, "Get Alert Configuration"), \ + ___C(SET_ALERT_CONFIG, "Set Alert Configuration"), \ + ___C(GET_SHUTDOWN_STATE, "Get Shutdown State"), \ + ___C(SET_SHUTDOWN_STATE, "Set Shutdown State"), \ + ___DEPRECATED(GET_POISON, "Get Poison List"), \ + ___DEPRECATED(INJECT_POISON, "Inject Poison"), \ + ___DEPRECATED(CLEAR_POISON, "Clear Poison"), \ + ___C(GET_SCAN_MEDIA_CAPS, "Get Scan Media Capabilities"), \ + ___DEPRECATED(SCAN_MEDIA, "Scan Media"), \ + ___DEPRECATED(GET_SCAN_MEDIA, "Get Scan Media Results"), \ + ___C(MAX, "invalid / last command") + +#define ___C(a, b) CXL_MEM_COMMAND_ID_##a +#define ___DEPRECATED(a, b) CXL_MEM_DEPRECATED_ID_##a +enum { CXL_CMDS }; + +#undef ___C +#undef ___DEPRECATED +#define ___C(a, b) { b } +#define ___DEPRECATED(a, b) { "Deprecated " b } +static const struct { + const char *name; +} cxl_command_names[] __attribute__((__unused__)) = { CXL_CMDS }; + +/* + * Here's how this actually breaks out: + * cxl_command_names[] = { + * [CXL_MEM_COMMAND_ID_INVALID] = { "Invalid Command" }, + * [CXL_MEM_COMMAND_ID_IDENTIFY] = { "Identify Command" }, + * ... + * [CXL_MEM_COMMAND_ID_MAX] = { "invalid / last command" }, + * }; + */ + +#undef ___C +#undef ___DEPRECATED +#define ___C(a, b) (0) +#define ___DEPRECATED(a, b) (1) + +static const __u8 cxl_deprecated_commands[] + __attribute__((__unused__)) = { CXL_CMDS }; + +/* + * Here's how this actually breaks out: + * cxl_deprecated_commands[] = { + * [CXL_MEM_COMMAND_ID_INVALID] = 0, + * [CXL_MEM_COMMAND_ID_IDENTIFY] = 0, + * ... + * [CXL_MEM_DEPRECATED_ID_GET_POISON] = 1, + * [CXL_MEM_DEPRECATED_ID_INJECT_POISON] = 1, + * [CXL_MEM_DEPRECATED_ID_CLEAR_POISON] = 1, + * ... + * }; + */ + +#undef ___C +#undef ___DEPRECATED + +/** + * struct cxl_command_info - Command information returned from a query. + * @id: ID number for the command. + * @flags: Flags that specify command behavior. + * + * CXL_MEM_COMMAND_FLAG_USER_ENABLED + * + * The given command id is supported by the driver and is supported by + * a related opcode on the device. + * + * CXL_MEM_COMMAND_FLAG_EXCLUSIVE + * + * Requests with the given command id will terminate with EBUSY as the + * kernel actively owns management of the given resource. For example, + * the label-storage-area can not be written while the kernel is + * actively managing that space. + * + * @size_in: Expected input size, or ~0 if variable length. + * @size_out: Expected output size, or ~0 if variable length. + * + * Represents a single command that is supported by both the driver and the + * hardware. This is returned as part of an array from the query ioctl. The + * following would be a command that takes a variable length input and returns 0 + * bytes of output. + * + * - @id = 10 + * - @flags = CXL_MEM_COMMAND_FLAG_ENABLED + * - @size_in = ~0 + * - @size_out = 0 + * + * See struct cxl_mem_query_commands. + */ +struct cxl_command_info { + __u32 id; + + __u32 flags; +#define CXL_MEM_COMMAND_FLAG_MASK GENMASK(1, 0) +#define CXL_MEM_COMMAND_FLAG_ENABLED BIT(0) +#define CXL_MEM_COMMAND_FLAG_EXCLUSIVE BIT(1) + + __u32 size_in; + __u32 size_out; +}; + +/** + * struct cxl_mem_query_commands - Query supported commands. + * @n_commands: In/out parameter. When @n_commands is > 0, the driver will + * return min(num_support_commands, n_commands). When @n_commands + * is 0, driver will return the number of total supported commands. + * @rsvd: Reserved for future use. + * @commands: Output array of supported commands. This array must be allocated + * by userspace to be at least min(num_support_commands, @n_commands) + * + * Allow userspace to query the available commands supported by both the driver, + * and the hardware. Commands that aren't supported by either the driver, or the + * hardware are not returned in the query. + * + * Examples: + * + * - { .n_commands = 0 } // Get number of supported commands + * - { .n_commands = 15, .commands = buf } // Return first 15 (or less) + * supported commands + * + * See struct cxl_command_info. + */ +struct cxl_mem_query_commands { + /* + * Input: Number of commands to return (space allocated by user) + * Output: Number of commands supported by the driver/hardware + * + * If n_commands is 0, kernel will only return number of commands and + * not try to populate commands[], thus allowing userspace to know how + * much space to allocate + */ + __u32 n_commands; + __u32 rsvd; + + struct cxl_command_info commands[]; /* out: supported commands */ +}; + +/** + * struct cxl_send_command - Send a command to a memory device. + * @id: The command to send to the memory device. This must be one of the + * commands returned by the query command. + * @flags: Flags for the command (input). + * @raw: Special fields for raw commands + * @raw.opcode: Opcode passed to hardware when using the RAW command. + * @raw.rsvd: Must be zero. + * @rsvd: Must be zero. + * @retval: Return value from the memory device (output). + * @in: Parameters associated with input payload. + * @in.size: Size of the payload to provide to the device (input). + * @in.rsvd: Must be zero. + * @in.payload: Pointer to memory for payload input, payload is little endian. + * @out: Parameters associated with output payload. + * @out.size: Size of the payload received from the device (input/output). This + * field is filled in by userspace to let the driver know how much + * space was allocated for output. It is populated by the driver to + * let userspace know how large the output payload actually was. + * @out.rsvd: Must be zero. + * @out.payload: Pointer to memory for payload output, payload is little endian. + * + * Mechanism for userspace to send a command to the hardware for processing. The + * driver will do basic validation on the command sizes. In some cases even the + * payload may be introspected. Userspace is required to allocate large enough + * buffers for size_out which can be variable length in certain situations. + */ +struct cxl_send_command { + __u32 id; + __u32 flags; + union { + struct { + __u16 opcode; + __u16 rsvd; + } raw; + __u32 rsvd; + }; + __u32 retval; + + struct { + __u32 size; + __u32 rsvd; + __u64 payload; + } in; + + struct { + __u32 size; + __u32 rsvd; + __u64 payload; + } out; +}; + +#endif diff --git a/linux-headers/include/linux/cyclades.h b/linux-headers/include/linux/cyclades.h index c27e58074d2..b13a931aa0e 100644 --- a/linux-headers/include/linux/cyclades.h +++ b/linux-headers/include/linux/cyclades.h @@ -1,109 +1,27 @@ /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $ - * linux/include/linux/cyclades.h - * - * This file was initially written by - * Randolph Bentson and is maintained by - * Ivan Passos . - * - * This file contains the general definitions for the cyclades.c driver - *$Log: cyclades.h,v $ - *Revision 3.1 2002/01/29 11:36:16 henrique - *added throttle field on struct cyclades_port to indicate whether the - *port is throttled or not - * - *Revision 3.1 2000/04/19 18:52:52 ivan - *converted address fields to unsigned long and added fields for physical - *addresses on cyclades_card structure; - * - *Revision 3.0 1998/11/02 14:20:59 ivan - *added nports field on cyclades_card structure; - * - *Revision 2.5 1998/08/03 16:57:01 ivan - *added cyclades_idle_stats structure; - * - *Revision 2.4 1998/06/01 12:09:53 ivan - *removed closing_wait2 from cyclades_port structure; - * - *Revision 2.3 1998/03/16 18:01:12 ivan - *changes in the cyclades_port structure to get it closer to the - *standard serial port structure; - *added constants for new ioctls; - * - *Revision 2.2 1998/02/17 16:50:00 ivan - *changes in the cyclades_port structure (addition of shutdown_wait and - *chip_rev variables); - *added constants for new ioctls and for CD1400 rev. numbers. - * - *Revision 2.1 1997/10/24 16:03:00 ivan - *added rflow (which allows enabling the CD1400 special flow control - *feature) and rtsdtr_inv (which allows DTR/RTS pin inversion) to - *cyclades_port structure; - *added Alpha support - * - *Revision 2.0 1997/06/30 10:30:00 ivan - *added some new doorbell command constants related to IOCTLW and - *UART error signaling - * - *Revision 1.8 1997/06/03 15:30:00 ivan - *added constant ZFIRM_HLT - *added constant CyPCI_Ze_win ( = 2 * Cy_PCI_Zwin) - * - *Revision 1.7 1997/03/26 10:30:00 daniel - *new entries at the end of cyclades_port struct to reallocate - *variables illegally allocated within card memory. - * - *Revision 1.6 1996/09/09 18:35:30 bentson - *fold in changes for Cyclom-Z -- including structures for - *communicating with board as well modest changes to original - *structures to support new features. - * - *Revision 1.5 1995/11/13 21:13:31 bentson - *changes suggested by Michael Chastain - *to support use of this file in non-kernel applications - * - * - */ #ifndef _LINUX_CYCLADES_H #define _LINUX_CYCLADES_H -#include +#warning "Support for features provided by this header has been removed" +#warning "Please consider updating your code" struct cyclades_monitor { - unsigned long int_count; - unsigned long char_count; - unsigned long char_max; - unsigned long char_last; -}; - -/* - * These stats all reflect activity since the device was last initialized. - * (i.e., since the port was opened with no other processes already having it - * open) - */ -struct cyclades_idle_stats { - __kernel_old_time_t in_use; /* Time device has been in use (secs) */ - __kernel_old_time_t recv_idle; /* Time since last char received (secs) */ - __kernel_old_time_t xmit_idle; /* Time since last char transmitted (secs) */ - unsigned long recv_bytes; /* Bytes received */ - unsigned long xmit_bytes; /* Bytes transmitted */ - unsigned long overruns; /* Input overruns */ - unsigned long frame_errs; /* Input framing errors */ - unsigned long parity_errs; /* Input parity errors */ -}; - -#define CYCLADES_MAGIC 0x4359 - -#define CYGETMON 0x435901 -#define CYGETTHRESH 0x435902 -#define CYSETTHRESH 0x435903 -#define CYGETDEFTHRESH 0x435904 -#define CYSETDEFTHRESH 0x435905 -#define CYGETTIMEOUT 0x435906 -#define CYSETTIMEOUT 0x435907 -#define CYGETDEFTIMEOUT 0x435908 -#define CYSETDEFTIMEOUT 0x435909 + unsigned long int_count; + unsigned long char_count; + unsigned long char_max; + unsigned long char_last; +}; + +#define CYGETMON 0x435901 +#define CYGETTHRESH 0x435902 +#define CYSETTHRESH 0x435903 +#define CYGETDEFTHRESH 0x435904 +#define CYSETDEFTHRESH 0x435905 +#define CYGETTIMEOUT 0x435906 +#define CYSETTIMEOUT 0x435907 +#define CYGETDEFTIMEOUT 0x435908 +#define CYSETDEFTIMEOUT 0x435909 #define CYSETRFLOW 0x43590a #define CYGETRFLOW 0x43590b #define CYSETRTSDTR_INV 0x43590c @@ -111,384 +29,7 @@ struct cyclades_idle_stats { #define CYZSETPOLLCYCLE 0x43590e #define CYZGETPOLLCYCLE 0x43590f #define CYGETCD1400VER 0x435910 -#define CYSETWAIT 0x435912 -#define CYGETWAIT 0x435913 - -/*************** CYCLOM-Z ADDITIONS ***************/ - -#define CZIOC ('M' << 8) -#define CZ_NBOARDS (CZIOC|0xfa) -#define CZ_BOOT_START (CZIOC|0xfb) -#define CZ_BOOT_DATA (CZIOC|0xfc) -#define CZ_BOOT_END (CZIOC|0xfd) -#define CZ_TEST (CZIOC|0xfe) - -#define CZ_DEF_POLL (HZ/25) - -#define MAX_BOARD 4 /* Max number of boards */ -#define MAX_DEV 256 /* Max number of ports total */ -#define CYZ_MAX_SPEED 921600 - -#define CYZ_FIFO_SIZE 16 - -#define CYZ_BOOT_NWORDS 0x100 -struct CYZ_BOOT_CTRL { - unsigned short nboard; - int status[MAX_BOARD]; - int nchannel[MAX_BOARD]; - int fw_rev[MAX_BOARD]; - unsigned long offset; - unsigned long data[CYZ_BOOT_NWORDS]; -}; - - -#ifndef DP_WINDOW_SIZE -/* - * Memory Window Sizes - */ - -#define DP_WINDOW_SIZE (0x00080000) /* window size 512 Kb */ -#define ZE_DP_WINDOW_SIZE (0x00100000) /* window size 1 Mb (Ze and - 8Zo V.2 */ -#define CTRL_WINDOW_SIZE (0x00000080) /* runtime regs 128 bytes */ - -/* - * CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver - * normally will access only interested on the fpga_id, fpga_version, - * start_cpu and stop_cpu. - */ - -struct CUSTOM_REG { - __u32 fpga_id; /* FPGA Identification Register */ - __u32 fpga_version; /* FPGA Version Number Register */ - __u32 cpu_start; /* CPU start Register (write) */ - __u32 cpu_stop; /* CPU stop Register (write) */ - __u32 misc_reg; /* Miscellaneous Register */ - __u32 idt_mode; /* IDT mode Register */ - __u32 uart_irq_status; /* UART IRQ status Register */ - __u32 clear_timer0_irq; /* Clear timer interrupt Register */ - __u32 clear_timer1_irq; /* Clear timer interrupt Register */ - __u32 clear_timer2_irq; /* Clear timer interrupt Register */ - __u32 test_register; /* Test Register */ - __u32 test_count; /* Test Count Register */ - __u32 timer_select; /* Timer select register */ - __u32 pr_uart_irq_status; /* Prioritized UART IRQ stat Reg */ - __u32 ram_wait_state; /* RAM wait-state Register */ - __u32 uart_wait_state; /* UART wait-state Register */ - __u32 timer_wait_state; /* timer wait-state Register */ - __u32 ack_wait_state; /* ACK wait State Register */ -}; - -/* - * RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime - * registers. This structure can be used to access the 9060 registers - * (memory mapped). - */ - -struct RUNTIME_9060 { - __u32 loc_addr_range; /* 00h - Local Address Range */ - __u32 loc_addr_base; /* 04h - Local Address Base */ - __u32 loc_arbitr; /* 08h - Local Arbitration */ - __u32 endian_descr; /* 0Ch - Big/Little Endian Descriptor */ - __u32 loc_rom_range; /* 10h - Local ROM Range */ - __u32 loc_rom_base; /* 14h - Local ROM Base */ - __u32 loc_bus_descr; /* 18h - Local Bus descriptor */ - __u32 loc_range_mst; /* 1Ch - Local Range for Master to PCI */ - __u32 loc_base_mst; /* 20h - Local Base for Master PCI */ - __u32 loc_range_io; /* 24h - Local Range for Master IO */ - __u32 pci_base_mst; /* 28h - PCI Base for Master PCI */ - __u32 pci_conf_io; /* 2Ch - PCI configuration for Master IO */ - __u32 filler1; /* 30h */ - __u32 filler2; /* 34h */ - __u32 filler3; /* 38h */ - __u32 filler4; /* 3Ch */ - __u32 mail_box_0; /* 40h - Mail Box 0 */ - __u32 mail_box_1; /* 44h - Mail Box 1 */ - __u32 mail_box_2; /* 48h - Mail Box 2 */ - __u32 mail_box_3; /* 4Ch - Mail Box 3 */ - __u32 filler5; /* 50h */ - __u32 filler6; /* 54h */ - __u32 filler7; /* 58h */ - __u32 filler8; /* 5Ch */ - __u32 pci_doorbell; /* 60h - PCI to Local Doorbell */ - __u32 loc_doorbell; /* 64h - Local to PCI Doorbell */ - __u32 intr_ctrl_stat; /* 68h - Interrupt Control/Status */ - __u32 init_ctrl; /* 6Ch - EEPROM control, Init Control, etc */ -}; - -/* Values for the Local Base Address re-map register */ - -#define WIN_RAM 0x00000001L /* set the sliding window to RAM */ -#define WIN_CREG 0x14000001L /* set the window to custom Registers */ - -/* Values timer select registers */ - -#define TIMER_BY_1M 0x00 /* clock divided by 1M */ -#define TIMER_BY_256K 0x01 /* clock divided by 256k */ -#define TIMER_BY_128K 0x02 /* clock divided by 128k */ -#define TIMER_BY_32K 0x03 /* clock divided by 32k */ - -/****************** ****************** *******************/ -#endif - -#ifndef ZFIRM_ID -/* #include "zfwint.h" */ -/****************** ****************** *******************/ -/* - * This file contains the definitions for interfacing with the - * Cyclom-Z ZFIRM Firmware. - */ - -/* General Constant definitions */ - -#define MAX_CHAN 64 /* max number of channels per board */ - -/* firmware id structure (set after boot) */ - -#define ID_ADDRESS 0x00000180L /* signature/pointer address */ -#define ZFIRM_ID 0x5557465AL /* ZFIRM/U signature */ -#define ZFIRM_HLT 0x59505B5CL /* ZFIRM needs external power supply */ -#define ZFIRM_RST 0x56040674L /* RST signal (due to FW reset) */ - -#define ZF_TINACT_DEF 1000 /* default inactivity timeout - (1000 ms) */ -#define ZF_TINACT ZF_TINACT_DEF - -struct FIRM_ID { - __u32 signature; /* ZFIRM/U signature */ - __u32 zfwctrl_addr; /* pointer to ZFW_CTRL structure */ -}; - -/* Op. System id */ - -#define C_OS_LINUX 0x00000030 /* generic Linux system */ - -/* channel op_mode */ - -#define C_CH_DISABLE 0x00000000 /* channel is disabled */ -#define C_CH_TXENABLE 0x00000001 /* channel Tx enabled */ -#define C_CH_RXENABLE 0x00000002 /* channel Rx enabled */ -#define C_CH_ENABLE 0x00000003 /* channel Tx/Rx enabled */ -#define C_CH_LOOPBACK 0x00000004 /* Loopback mode */ - -/* comm_parity - parity */ - -#define C_PR_NONE 0x00000000 /* None */ -#define C_PR_ODD 0x00000001 /* Odd */ -#define C_PR_EVEN 0x00000002 /* Even */ -#define C_PR_MARK 0x00000004 /* Mark */ -#define C_PR_SPACE 0x00000008 /* Space */ -#define C_PR_PARITY 0x000000ff - -#define C_PR_DISCARD 0x00000100 /* discard char with frame/par error */ -#define C_PR_IGNORE 0x00000200 /* ignore frame/par error */ - -/* comm_data_l - data length and stop bits */ - -#define C_DL_CS5 0x00000001 -#define C_DL_CS6 0x00000002 -#define C_DL_CS7 0x00000004 -#define C_DL_CS8 0x00000008 -#define C_DL_CS 0x0000000f -#define C_DL_1STOP 0x00000010 -#define C_DL_15STOP 0x00000020 -#define C_DL_2STOP 0x00000040 -#define C_DL_STOP 0x000000f0 - -/* interrupt enabling/status */ - -#define C_IN_DISABLE 0x00000000 /* zero, disable interrupts */ -#define C_IN_TXBEMPTY 0x00000001 /* tx buffer empty */ -#define C_IN_TXLOWWM 0x00000002 /* tx buffer below LWM */ -#define C_IN_RXHIWM 0x00000010 /* rx buffer above HWM */ -#define C_IN_RXNNDT 0x00000020 /* rx no new data timeout */ -#define C_IN_MDCD 0x00000100 /* modem DCD change */ -#define C_IN_MDSR 0x00000200 /* modem DSR change */ -#define C_IN_MRI 0x00000400 /* modem RI change */ -#define C_IN_MCTS 0x00000800 /* modem CTS change */ -#define C_IN_RXBRK 0x00001000 /* Break received */ -#define C_IN_PR_ERROR 0x00002000 /* parity error */ -#define C_IN_FR_ERROR 0x00004000 /* frame error */ -#define C_IN_OVR_ERROR 0x00008000 /* overrun error */ -#define C_IN_RXOFL 0x00010000 /* RX buffer overflow */ -#define C_IN_IOCTLW 0x00020000 /* I/O control w/ wait */ -#define C_IN_MRTS 0x00040000 /* modem RTS drop */ -#define C_IN_ICHAR 0x00080000 - -/* flow control */ - -#define C_FL_OXX 0x00000001 /* output Xon/Xoff flow control */ -#define C_FL_IXX 0x00000002 /* output Xon/Xoff flow control */ -#define C_FL_OIXANY 0x00000004 /* output Xon/Xoff (any xon) */ -#define C_FL_SWFLOW 0x0000000f - -/* flow status */ - -#define C_FS_TXIDLE 0x00000000 /* no Tx data in the buffer or UART */ -#define C_FS_SENDING 0x00000001 /* UART is sending data */ -#define C_FS_SWFLOW 0x00000002 /* Tx is stopped by received Xoff */ - -/* rs_control/rs_status RS-232 signals */ - -#define C_RS_PARAM 0x80000000 /* Indicates presence of parameter in - IOCTLM command */ -#define C_RS_RTS 0x00000001 /* RTS */ -#define C_RS_DTR 0x00000004 /* DTR */ -#define C_RS_DCD 0x00000100 /* CD */ -#define C_RS_DSR 0x00000200 /* DSR */ -#define C_RS_RI 0x00000400 /* RI */ -#define C_RS_CTS 0x00000800 /* CTS */ - -/* commands Host <-> Board */ - -#define C_CM_RESET 0x01 /* reset/flush buffers */ -#define C_CM_IOCTL 0x02 /* re-read CH_CTRL */ -#define C_CM_IOCTLW 0x03 /* re-read CH_CTRL, intr when done */ -#define C_CM_IOCTLM 0x04 /* RS-232 outputs change */ -#define C_CM_SENDXOFF 0x10 /* send Xoff */ -#define C_CM_SENDXON 0x11 /* send Xon */ -#define C_CM_CLFLOW 0x12 /* Clear flow control (resume) */ -#define C_CM_SENDBRK 0x41 /* send break */ -#define C_CM_INTBACK 0x42 /* Interrupt back */ -#define C_CM_SET_BREAK 0x43 /* Tx break on */ -#define C_CM_CLR_BREAK 0x44 /* Tx break off */ -#define C_CM_CMD_DONE 0x45 /* Previous command done */ -#define C_CM_INTBACK2 0x46 /* Alternate Interrupt back */ -#define C_CM_TINACT 0x51 /* set inactivity detection */ -#define C_CM_IRQ_ENBL 0x52 /* enable generation of interrupts */ -#define C_CM_IRQ_DSBL 0x53 /* disable generation of interrupts */ -#define C_CM_ACK_ENBL 0x54 /* enable acknowledged interrupt mode */ -#define C_CM_ACK_DSBL 0x55 /* disable acknowledged intr mode */ -#define C_CM_FLUSH_RX 0x56 /* flushes Rx buffer */ -#define C_CM_FLUSH_TX 0x57 /* flushes Tx buffer */ -#define C_CM_Q_ENABLE 0x58 /* enables queue access from the - driver */ -#define C_CM_Q_DISABLE 0x59 /* disables queue access from the - driver */ - -#define C_CM_TXBEMPTY 0x60 /* Tx buffer is empty */ -#define C_CM_TXLOWWM 0x61 /* Tx buffer low water mark */ -#define C_CM_RXHIWM 0x62 /* Rx buffer high water mark */ -#define C_CM_RXNNDT 0x63 /* rx no new data timeout */ -#define C_CM_TXFEMPTY 0x64 -#define C_CM_ICHAR 0x65 -#define C_CM_MDCD 0x70 /* modem DCD change */ -#define C_CM_MDSR 0x71 /* modem DSR change */ -#define C_CM_MRI 0x72 /* modem RI change */ -#define C_CM_MCTS 0x73 /* modem CTS change */ -#define C_CM_MRTS 0x74 /* modem RTS drop */ -#define C_CM_RXBRK 0x84 /* Break received */ -#define C_CM_PR_ERROR 0x85 /* Parity error */ -#define C_CM_FR_ERROR 0x86 /* Frame error */ -#define C_CM_OVR_ERROR 0x87 /* Overrun error */ -#define C_CM_RXOFL 0x88 /* RX buffer overflow */ -#define C_CM_CMDERROR 0x90 /* command error */ -#define C_CM_FATAL 0x91 /* fatal error */ -#define C_CM_HW_RESET 0x92 /* reset board */ - -/* - * CH_CTRL - This per port structure contains all parameters - * that control an specific port. It can be seen as the - * configuration registers of a "super-serial-controller". - */ - -struct CH_CTRL { - __u32 op_mode; /* operation mode */ - __u32 intr_enable; /* interrupt masking */ - __u32 sw_flow; /* SW flow control */ - __u32 flow_status; /* output flow status */ - __u32 comm_baud; /* baud rate - numerically specified */ - __u32 comm_parity; /* parity */ - __u32 comm_data_l; /* data length/stop */ - __u32 comm_flags; /* other flags */ - __u32 hw_flow; /* HW flow control */ - __u32 rs_control; /* RS-232 outputs */ - __u32 rs_status; /* RS-232 inputs */ - __u32 flow_xon; /* xon char */ - __u32 flow_xoff; /* xoff char */ - __u32 hw_overflow; /* hw overflow counter */ - __u32 sw_overflow; /* sw overflow counter */ - __u32 comm_error; /* frame/parity error counter */ - __u32 ichar; - __u32 filler[7]; -}; - - -/* - * BUF_CTRL - This per channel structure contains - * all Tx and Rx buffer control for a given channel. - */ - -struct BUF_CTRL { - __u32 flag_dma; /* buffers are in Host memory */ - __u32 tx_bufaddr; /* address of the tx buffer */ - __u32 tx_bufsize; /* tx buffer size */ - __u32 tx_threshold; /* tx low water mark */ - __u32 tx_get; /* tail index tx buf */ - __u32 tx_put; /* head index tx buf */ - __u32 rx_bufaddr; /* address of the rx buffer */ - __u32 rx_bufsize; /* rx buffer size */ - __u32 rx_threshold; /* rx high water mark */ - __u32 rx_get; /* tail index rx buf */ - __u32 rx_put; /* head index rx buf */ - __u32 filler[5]; /* filler to align structures */ -}; - -/* - * BOARD_CTRL - This per board structure contains all global - * control fields related to the board. - */ - -struct BOARD_CTRL { - - /* static info provided by the on-board CPU */ - __u32 n_channel; /* number of channels */ - __u32 fw_version; /* firmware version */ - - /* static info provided by the driver */ - __u32 op_system; /* op_system id */ - __u32 dr_version; /* driver version */ - - /* board control area */ - __u32 inactivity; /* inactivity control */ - - /* host to FW commands */ - __u32 hcmd_channel; /* channel number */ - __u32 hcmd_param; /* pointer to parameters */ - - /* FW to Host commands */ - __u32 fwcmd_channel; /* channel number */ - __u32 fwcmd_param; /* pointer to parameters */ - __u32 zf_int_queue_addr; /* offset for INT_QUEUE structure */ - - /* filler so the structures are aligned */ - __u32 filler[6]; -}; - -/* Host Interrupt Queue */ - -#define QUEUE_SIZE (10*MAX_CHAN) - -struct INT_QUEUE { - unsigned char intr_code[QUEUE_SIZE]; - unsigned long channel[QUEUE_SIZE]; - unsigned long param[QUEUE_SIZE]; - unsigned long put; - unsigned long get; -}; - -/* - * ZFW_CTRL - This is the data structure that includes all other - * data structures used by the Firmware. - */ - -struct ZFW_CTRL { - struct BOARD_CTRL board_ctrl; - struct CH_CTRL ch_ctrl[MAX_CHAN]; - struct BUF_CTRL buf_ctrl[MAX_CHAN]; -}; - -/****************** ****************** *******************/ -#endif +#define CYSETWAIT 0x435912 +#define CYGETWAIT 0x435913 #endif /* _LINUX_CYCLADES_H */ diff --git a/linux-headers/include/linux/cycx_cfm.h b/linux-headers/include/linux/cycx_cfm.h index 51f541942ff..91778c8024b 100644 --- a/linux-headers/include/linux/cycx_cfm.h +++ b/linux-headers/include/linux/cycx_cfm.h @@ -91,7 +91,7 @@ struct cycx_firmware { unsigned short reserved[6]; char descr[CFM_DESCR_LEN]; struct cycx_fw_info info; - unsigned char image[0]; + unsigned char image[]; }; struct cycx_fw_header { diff --git a/linux-headers/include/linux/dcbnl.h b/linux-headers/include/linux/dcbnl.h index a791a94013a..7e15214aa5d 100644 --- a/linux-headers/include/linux/dcbnl.h +++ b/linux-headers/include/linux/dcbnl.h @@ -218,6 +218,9 @@ struct cee_pfc { #define IEEE_8021QAZ_APP_SEL_ANY 4 #define IEEE_8021QAZ_APP_SEL_DSCP 5 +/* Non-std selector values */ +#define DCB_APP_SEL_PCP 255 + /* This structure contains the IEEE 802.1Qaz APP managed object. This * object is also used for the CEE std as well. * @@ -247,6 +250,8 @@ struct dcb_app { __u16 protocol; }; +#define IEEE_8021QAZ_APP_SEL_MAX 255 + /** * struct dcb_peer_app_info - APP feature information sent by the peer * @@ -405,6 +410,8 @@ enum dcbnl_attrs { * @DCB_ATTR_IEEE_PEER_ETS: peer ETS configuration - get only * @DCB_ATTR_IEEE_PEER_PFC: peer PFC configuration - get only * @DCB_ATTR_IEEE_PEER_APP: peer APP tlv - get only + * @DCB_ATTR_DCB_APP_TRUST_TABLE: selector trust table + * @DCB_ATTR_DCB_REWR_TABLE: rewrite configuration */ enum ieee_attrs { DCB_ATTR_IEEE_UNSPEC, @@ -418,6 +425,8 @@ enum ieee_attrs { DCB_ATTR_IEEE_QCN, DCB_ATTR_IEEE_QCN_STATS, DCB_ATTR_DCB_BUFFER, + DCB_ATTR_DCB_APP_TRUST_TABLE, + DCB_ATTR_DCB_REWR_TABLE, __DCB_ATTR_IEEE_MAX }; #define DCB_ATTR_IEEE_MAX (__DCB_ATTR_IEEE_MAX - 1) @@ -425,6 +434,7 @@ enum ieee_attrs { enum ieee_attrs_app { DCB_ATTR_IEEE_APP_UNSPEC, DCB_ATTR_IEEE_APP, + DCB_ATTR_DCB_APP, __DCB_ATTR_IEEE_APP_MAX }; #define DCB_ATTR_IEEE_APP_MAX (__DCB_ATTR_IEEE_APP_MAX - 1) diff --git a/linux-headers/include/linux/devlink.h b/linux-headers/include/linux/devlink.h index 958ef7b949c..8b9b98e7505 100644 --- a/linux-headers/include/linux/devlink.h +++ b/linux-headers/include/linux/devlink.h @@ -126,6 +126,19 @@ enum devlink_command { DEVLINK_CMD_HEALTH_REPORTER_TEST, + DEVLINK_CMD_RATE_GET, /* can dump */ + DEVLINK_CMD_RATE_SET, + DEVLINK_CMD_RATE_NEW, + DEVLINK_CMD_RATE_DEL, + + DEVLINK_CMD_LINECARD_GET, /* can dump */ + DEVLINK_CMD_LINECARD_SET, + DEVLINK_CMD_LINECARD_NEW, + DEVLINK_CMD_LINECARD_DEL, + + DEVLINK_CMD_SELFTESTS_GET, /* can dump */ + DEVLINK_CMD_SELFTESTS_RUN, + /* add new commands above here */ __DEVLINK_CMD_MAX, DEVLINK_CMD_MAX = __DEVLINK_CMD_MAX - 1 @@ -200,6 +213,15 @@ enum devlink_port_flavour { DEVLINK_PORT_FLAVOUR_UNUSED, /* Port which exists in the switch, but * is not used in any way. */ + DEVLINK_PORT_FLAVOUR_PCI_SF, /* Represents eswitch port + * for the PCI SF. It is an internal + * port that faces the PCI SF. + */ +}; + +enum devlink_rate_type { + DEVLINK_RATE_TYPE_LEAF, + DEVLINK_RATE_TYPE_NODE, }; enum devlink_param_cmode { @@ -257,6 +279,30 @@ enum { #define DEVLINK_SUPPORTED_FLASH_OVERWRITE_SECTIONS \ (_BITUL(__DEVLINK_FLASH_OVERWRITE_MAX_BIT) - 1) +enum devlink_attr_selftest_id { + DEVLINK_ATTR_SELFTEST_ID_UNSPEC, + DEVLINK_ATTR_SELFTEST_ID_FLASH, /* flag */ + + __DEVLINK_ATTR_SELFTEST_ID_MAX, + DEVLINK_ATTR_SELFTEST_ID_MAX = __DEVLINK_ATTR_SELFTEST_ID_MAX - 1 +}; + +enum devlink_selftest_status { + DEVLINK_SELFTEST_STATUS_SKIP, + DEVLINK_SELFTEST_STATUS_PASS, + DEVLINK_SELFTEST_STATUS_FAIL +}; + +enum devlink_attr_selftest_result { + DEVLINK_ATTR_SELFTEST_RESULT_UNSPEC, + DEVLINK_ATTR_SELFTEST_RESULT, /* nested */ + DEVLINK_ATTR_SELFTEST_RESULT_ID, /* u32, enum devlink_attr_selftest_id */ + DEVLINK_ATTR_SELFTEST_RESULT_STATUS, /* u8, enum devlink_selftest_status */ + + __DEVLINK_ATTR_SELFTEST_RESULT_MAX, + DEVLINK_ATTR_SELFTEST_RESULT_MAX = __DEVLINK_ATTR_SELFTEST_RESULT_MAX - 1 +}; + /** * enum devlink_trap_action - Packet trap action. * @DEVLINK_TRAP_ACTION_DROP: Packet is dropped by the device and a copy is not @@ -324,6 +370,19 @@ enum devlink_reload_limit { #define DEVLINK_RELOAD_LIMITS_VALID_MASK (_BITUL(__DEVLINK_RELOAD_LIMIT_MAX) - 1) +enum devlink_linecard_state { + DEVLINK_LINECARD_STATE_UNSPEC, + DEVLINK_LINECARD_STATE_UNPROVISIONED, + DEVLINK_LINECARD_STATE_UNPROVISIONING, + DEVLINK_LINECARD_STATE_PROVISIONING, + DEVLINK_LINECARD_STATE_PROVISIONING_FAILED, + DEVLINK_LINECARD_STATE_PROVISIONED, + DEVLINK_LINECARD_STATE_ACTIVE, + + __DEVLINK_LINECARD_STATE_MAX, + DEVLINK_LINECARD_STATE_MAX = __DEVLINK_LINECARD_STATE_MAX - 1 +}; + enum devlink_attr { /* don't change the order or add anything between, this is ABI! */ DEVLINK_ATTR_UNSPEC, @@ -529,6 +588,30 @@ enum devlink_attr { DEVLINK_ATTR_RELOAD_ACTION_INFO, /* nested */ DEVLINK_ATTR_RELOAD_ACTION_STATS, /* nested */ + DEVLINK_ATTR_PORT_PCI_SF_NUMBER, /* u32 */ + + DEVLINK_ATTR_RATE_TYPE, /* u16 */ + DEVLINK_ATTR_RATE_TX_SHARE, /* u64 */ + DEVLINK_ATTR_RATE_TX_MAX, /* u64 */ + DEVLINK_ATTR_RATE_NODE_NAME, /* string */ + DEVLINK_ATTR_RATE_PARENT_NODE_NAME, /* string */ + + DEVLINK_ATTR_REGION_MAX_SNAPSHOTS, /* u32 */ + + DEVLINK_ATTR_LINECARD_INDEX, /* u32 */ + DEVLINK_ATTR_LINECARD_STATE, /* u8 */ + DEVLINK_ATTR_LINECARD_TYPE, /* string */ + DEVLINK_ATTR_LINECARD_SUPPORTED_TYPES, /* nested */ + + DEVLINK_ATTR_NESTED_DEVLINK, /* nested */ + + DEVLINK_ATTR_SELFTESTS, /* nested */ + + DEVLINK_ATTR_RATE_TX_PRIORITY, /* u32 */ + DEVLINK_ATTR_RATE_TX_WEIGHT, /* u32 */ + + DEVLINK_ATTR_REGION_DIRECT, /* flag */ + /* add new attributes above here, update the policy in devlink.c */ __DEVLINK_ATTR_MAX, @@ -575,12 +658,49 @@ enum devlink_resource_unit { DEVLINK_RESOURCE_UNIT_ENTRY, }; +enum devlink_port_fn_attr_cap { + DEVLINK_PORT_FN_ATTR_CAP_ROCE_BIT, + DEVLINK_PORT_FN_ATTR_CAP_MIGRATABLE_BIT, + DEVLINK_PORT_FN_ATTR_CAP_IPSEC_CRYPTO_BIT, + DEVLINK_PORT_FN_ATTR_CAP_IPSEC_PACKET_BIT, + + /* Add new caps above */ + __DEVLINK_PORT_FN_ATTR_CAPS_MAX, +}; + +#define DEVLINK_PORT_FN_CAP_ROCE _BITUL(DEVLINK_PORT_FN_ATTR_CAP_ROCE_BIT) +#define DEVLINK_PORT_FN_CAP_MIGRATABLE \ + _BITUL(DEVLINK_PORT_FN_ATTR_CAP_MIGRATABLE_BIT) +#define DEVLINK_PORT_FN_CAP_IPSEC_CRYPTO _BITUL(DEVLINK_PORT_FN_ATTR_CAP_IPSEC_CRYPTO_BIT) +#define DEVLINK_PORT_FN_CAP_IPSEC_PACKET _BITUL(DEVLINK_PORT_FN_ATTR_CAP_IPSEC_PACKET_BIT) + enum devlink_port_function_attr { DEVLINK_PORT_FUNCTION_ATTR_UNSPEC, DEVLINK_PORT_FUNCTION_ATTR_HW_ADDR, /* binary */ + DEVLINK_PORT_FN_ATTR_STATE, /* u8 */ + DEVLINK_PORT_FN_ATTR_OPSTATE, /* u8 */ + DEVLINK_PORT_FN_ATTR_CAPS, /* bitfield32 */ __DEVLINK_PORT_FUNCTION_ATTR_MAX, DEVLINK_PORT_FUNCTION_ATTR_MAX = __DEVLINK_PORT_FUNCTION_ATTR_MAX - 1 }; +enum devlink_port_fn_state { + DEVLINK_PORT_FN_STATE_INACTIVE, + DEVLINK_PORT_FN_STATE_ACTIVE, +}; + +/** + * enum devlink_port_fn_opstate - indicates operational state of the function + * @DEVLINK_PORT_FN_OPSTATE_ATTACHED: Driver is attached to the function. + * For graceful tear down of the function, after inactivation of the + * function, user should wait for operational state to turn DETACHED. + * @DEVLINK_PORT_FN_OPSTATE_DETACHED: Driver is detached from the function. + * It is safe to delete the port. + */ +enum devlink_port_fn_opstate { + DEVLINK_PORT_FN_OPSTATE_DETACHED, + DEVLINK_PORT_FN_OPSTATE_ATTACHED, +}; + #endif /* _LINUX_DEVLINK_H_ */ diff --git a/linux-headers/include/linux/dlm.h b/linux-headers/include/linux/dlm.h index 546318cb77f..a8f64a7b6d5 100644 --- a/linux-headers/include/linux/dlm.h +++ b/linux-headers/include/linux/dlm.h @@ -68,8 +68,8 @@ struct dlm_lksb { /* dlm_new_lockspace() flags */ +/* DLM_LSFL_TIMEWARN is deprecated and reserved. DO NOT USE! */ #define DLM_LSFL_TIMEWARN 0x00000002 -#define DLM_LSFL_FS 0x00000004 #define DLM_LSFL_NEWEXCL 0x00000008 diff --git a/linux-headers/include/linux/dlm_device.h b/linux-headers/include/linux/dlm_device.h index 09b2ed93018..297c8d80b31 100644 --- a/linux-headers/include/linux/dlm_device.h +++ b/linux-headers/include/linux/dlm_device.h @@ -45,13 +45,13 @@ struct dlm_lock_params { void *bastaddr; struct dlm_lksb *lksb; char lvb[DLM_USER_LVB_LEN]; - char name[0]; + char name[]; }; struct dlm_lspace_params { __u32 flags; __u32 minor; - char name[0]; + char name[]; }; struct dlm_purge_params { diff --git a/linux-headers/include/linux/dlm_netlink.h b/linux-headers/include/linux/dlm_netlink.h deleted file mode 100644 index 5dc3a67d353..00000000000 --- a/linux-headers/include/linux/dlm_netlink.h +++ /dev/null @@ -1,60 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright (C) 2007 Red Hat, Inc. All rights reserved. - * - * This copyrighted material is made available to anyone wishing to use, - * modify, copy, or redistribute it subject to the terms and conditions - * of the GNU General Public License v.2. - */ - -#ifndef _DLM_NETLINK_H -#define _DLM_NETLINK_H - -#include -#include - -enum { - DLM_STATUS_WAITING = 1, - DLM_STATUS_GRANTED = 2, - DLM_STATUS_CONVERT = 3, -}; - -#define DLM_LOCK_DATA_VERSION 1 - -struct dlm_lock_data { - __u16 version; - __u32 lockspace_id; - int nodeid; - int ownpid; - __u32 id; - __u32 remid; - __u64 xid; - __s8 status; - __s8 grmode; - __s8 rqmode; - unsigned long timestamp; - int resource_namelen; - char resource_name[DLM_RESNAME_MAXLEN]; -}; - -enum { - DLM_CMD_UNSPEC = 0, - DLM_CMD_HELLO, /* user->kernel */ - DLM_CMD_TIMEOUT, /* kernel->user */ - __DLM_CMD_MAX, -}; - -#define DLM_CMD_MAX (__DLM_CMD_MAX - 1) - -enum { - DLM_TYPE_UNSPEC = 0, - DLM_TYPE_LOCK, - __DLM_TYPE_MAX, -}; - -#define DLM_TYPE_MAX (__DLM_TYPE_MAX - 1) - -#define DLM_GENL_VERSION 0x1 -#define DLM_GENL_NAME "DLM" - -#endif /* _DLM_NETLINK_H */ diff --git a/linux-headers/include/linux/dlm_plock.h b/linux-headers/include/linux/dlm_plock.h index 577af304b98..637b604bff5 100644 --- a/linux-headers/include/linux/dlm_plock.h +++ b/linux-headers/include/linux/dlm_plock.h @@ -22,6 +22,7 @@ enum { DLM_PLOCK_OP_LOCK = 1, DLM_PLOCK_OP_UNLOCK, DLM_PLOCK_OP_GET, + DLM_PLOCK_OP_CANCEL, }; #define DLM_PLOCK_FL_CLOSE 1 diff --git a/linux-headers/include/linux/dlmconstants.h b/linux-headers/include/linux/dlmconstants.h index a8ae47c32a3..6ca77a6388b 100644 --- a/linux-headers/include/linux/dlmconstants.h +++ b/linux-headers/include/linux/dlmconstants.h @@ -87,7 +87,6 @@ * DLM_LKF_NODLCKWT * * Do not cancel the lock if it gets into conversion deadlock. - * Exclude this lock from being monitored due to DLM_LSFL_TIMEWARN. * * DLM_LKF_NODLCKBLK * @@ -132,6 +131,10 @@ * Unlock the lock even if it is converting or waiting or has sublocks. * Only really for use by the userland device.c code. * + * DLM_LKF_TIMEOUT + * + * This value is deprecated and reserved. DO NOT USE! + * */ #define DLM_LKF_NOQUEUE 0x00000001 diff --git a/linux-headers/include/linux/dm-ioctl.h b/linux-headers/include/linux/dm-ioctl.h index 4933b6b67b8..1990b5700f6 100644 --- a/linux-headers/include/linux/dm-ioctl.h +++ b/linux-headers/include/linux/dm-ioctl.h @@ -182,7 +182,7 @@ struct dm_target_spec { struct dm_target_deps { __u32 count; /* Array size */ __u32 padding; /* unused */ - __u64 dev[0]; /* out */ + __u64 dev[]; /* out */ }; /* @@ -192,9 +192,23 @@ struct dm_name_list { __u64 dev; __u32 next; /* offset to the next record from the _start_ of this */ - char name[0]; + char name[]; + + /* + * The following members can be accessed by taking a pointer that + * points immediately after the terminating zero character in "name" + * and aligning this pointer to next 8-byte boundary. + * Uuid is present if the flag DM_NAME_LIST_FLAG_HAS_UUID is set. + * + * __u32 event_nr; + * __u32 flags; + * char uuid[0]; + */ }; +#define DM_NAME_LIST_FLAG_HAS_UUID 1 +#define DM_NAME_LIST_FLAG_DOESNT_HAVE_UUID 2 + /* * Used to retrieve the target versions */ @@ -202,7 +216,7 @@ struct dm_target_versions { __u32 next; __u32 version[3]; - char name[0]; + char name[]; }; /* @@ -211,7 +225,7 @@ struct dm_target_versions { struct dm_target_msg { __u64 sector; /* Device sector */ - char message[0]; + char message[]; }; /* @@ -272,9 +286,9 @@ enum { #define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl) #define DM_VERSION_MAJOR 4 -#define DM_VERSION_MINOR 43 +#define DM_VERSION_MINOR 48 #define DM_VERSION_PATCHLEVEL 0 -#define DM_VERSION_EXTRA "-ioctl (2020-10-01)" +#define DM_VERSION_EXTRA "-ioctl (2023-03-01)" /* Status bits */ #define DM_READONLY_FLAG (1 << 0) /* In/Out */ @@ -362,4 +376,10 @@ enum { */ #define DM_INTERNAL_SUSPEND_FLAG (1 << 18) /* Out */ +/* + * If set, returns in the in buffer passed by UM, the raw table information + * that would be measured by IMA subsystem on device state change. + */ +#define DM_IMA_MEASUREMENT_FLAG (1 << 19) /* In */ + #endif /* _LINUX_DM_IOCTL_H */ diff --git a/linux-headers/include/linux/dm-log-userspace.h b/linux-headers/include/linux/dm-log-userspace.h index 5c47a860337..23dad9565e4 100644 --- a/linux-headers/include/linux/dm-log-userspace.h +++ b/linux-headers/include/linux/dm-log-userspace.h @@ -426,7 +426,7 @@ struct dm_ulog_request { __u32 request_type; /* DM_ULOG_* defined above */ __u32 data_size; /* How much data (not including this struct) */ - char data[0]; + char data[]; }; #endif /* __DM_LOG_USERSPACE_H__ */ diff --git a/linux-headers/include/linux/dma-buf.h b/linux-headers/include/linux/dma-buf.h index 7f30393b92c..5a6fda66d9a 100644 --- a/linux-headers/include/linux/dma-buf.h +++ b/linux-headers/include/linux/dma-buf.h @@ -22,8 +22,56 @@ #include -/* begin/end dma-buf functions used for userspace mmap. */ +/** + * struct dma_buf_sync - Synchronize with CPU access. + * + * When a DMA buffer is accessed from the CPU via mmap, it is not always + * possible to guarantee coherency between the CPU-visible map and underlying + * memory. To manage coherency, DMA_BUF_IOCTL_SYNC must be used to bracket + * any CPU access to give the kernel the chance to shuffle memory around if + * needed. + * + * Prior to accessing the map, the client must call DMA_BUF_IOCTL_SYNC + * with DMA_BUF_SYNC_START and the appropriate read/write flags. Once the + * access is complete, the client should call DMA_BUF_IOCTL_SYNC with + * DMA_BUF_SYNC_END and the same read/write flags. + * + * The synchronization provided via DMA_BUF_IOCTL_SYNC only provides cache + * coherency. It does not prevent other processes or devices from + * accessing the memory at the same time. If synchronization with a GPU or + * other device driver is required, it is the client's responsibility to + * wait for buffer to be ready for reading or writing before calling this + * ioctl with DMA_BUF_SYNC_START. Likewise, the client must ensure that + * follow-up work is not submitted to GPU or other device driver until + * after this ioctl has been called with DMA_BUF_SYNC_END? + * + * If the driver or API with which the client is interacting uses implicit + * synchronization, waiting for prior work to complete can be done via + * poll() on the DMA buffer file descriptor. If the driver or API requires + * explicit synchronization, the client may have to wait on a sync_file or + * other synchronization primitive outside the scope of the DMA buffer API. + */ struct dma_buf_sync { + /** + * @flags: Set of access flags + * + * DMA_BUF_SYNC_START: + * Indicates the start of a map access session. + * + * DMA_BUF_SYNC_END: + * Indicates the end of a map access session. + * + * DMA_BUF_SYNC_READ: + * Indicates that the mapped DMA buffer will be read by the + * client via the CPU map. + * + * DMA_BUF_SYNC_WRITE: + * Indicates that the mapped DMA buffer will be written by the + * client via the CPU map. + * + * DMA_BUF_SYNC_RW: + * An alias for DMA_BUF_SYNC_READ | DMA_BUF_SYNC_WRITE. + */ __u64 flags; }; @@ -37,6 +85,88 @@ struct dma_buf_sync { #define DMA_BUF_NAME_LEN 32 +/** + * struct dma_buf_export_sync_file - Get a sync_file from a dma-buf + * + * Userspace can perform a DMA_BUF_IOCTL_EXPORT_SYNC_FILE to retrieve the + * current set of fences on a dma-buf file descriptor as a sync_file. CPU + * waits via poll() or other driver-specific mechanisms typically wait on + * whatever fences are on the dma-buf at the time the wait begins. This + * is similar except that it takes a snapshot of the current fences on the + * dma-buf for waiting later instead of waiting immediately. This is + * useful for modern graphics APIs such as Vulkan which assume an explicit + * synchronization model but still need to inter-operate with dma-buf. + * + * The intended usage pattern is the following: + * + * 1. Export a sync_file with flags corresponding to the expected GPU usage + * via DMA_BUF_IOCTL_EXPORT_SYNC_FILE. + * + * 2. Submit rendering work which uses the dma-buf. The work should wait on + * the exported sync file before rendering and produce another sync_file + * when complete. + * + * 3. Import the rendering-complete sync_file into the dma-buf with flags + * corresponding to the GPU usage via DMA_BUF_IOCTL_IMPORT_SYNC_FILE. + * + * Unlike doing implicit synchronization via a GPU kernel driver's exec ioctl, + * the above is not a single atomic operation. If userspace wants to ensure + * ordering via these fences, it is the respnosibility of userspace to use + * locks or other mechanisms to ensure that no other context adds fences or + * submits work between steps 1 and 3 above. + */ +struct dma_buf_export_sync_file { + /** + * @flags: Read/write flags + * + * Must be DMA_BUF_SYNC_READ, DMA_BUF_SYNC_WRITE, or both. + * + * If DMA_BUF_SYNC_READ is set and DMA_BUF_SYNC_WRITE is not set, + * the returned sync file waits on any writers of the dma-buf to + * complete. Waiting on the returned sync file is equivalent to + * poll() with POLLIN. + * + * If DMA_BUF_SYNC_WRITE is set, the returned sync file waits on + * any users of the dma-buf (read or write) to complete. Waiting + * on the returned sync file is equivalent to poll() with POLLOUT. + * If both DMA_BUF_SYNC_WRITE and DMA_BUF_SYNC_READ are set, this + * is equivalent to just DMA_BUF_SYNC_WRITE. + */ + __u32 flags; + /** @fd: Returned sync file descriptor */ + __s32 fd; +}; + +/** + * struct dma_buf_import_sync_file - Insert a sync_file into a dma-buf + * + * Userspace can perform a DMA_BUF_IOCTL_IMPORT_SYNC_FILE to insert a + * sync_file into a dma-buf for the purposes of implicit synchronization + * with other dma-buf consumers. This allows clients using explicitly + * synchronized APIs such as Vulkan to inter-op with dma-buf consumers + * which expect implicit synchronization such as OpenGL or most media + * drivers/video. + */ +struct dma_buf_import_sync_file { + /** + * @flags: Read/write flags + * + * Must be DMA_BUF_SYNC_READ, DMA_BUF_SYNC_WRITE, or both. + * + * If DMA_BUF_SYNC_READ is set and DMA_BUF_SYNC_WRITE is not set, + * this inserts the sync_file as a read-only fence. Any subsequent + * implicitly synchronized writes to this dma-buf will wait on this + * fence but reads will not. + * + * If DMA_BUF_SYNC_WRITE is set, this inserts the sync_file as a + * write fence. All subsequent implicitly synchronized access to + * this dma-buf will wait on this fence. + */ + __u32 flags; + /** @fd: Sync file descriptor */ + __s32 fd; +}; + #define DMA_BUF_BASE 'b' #define DMA_BUF_IOCTL_SYNC _IOW(DMA_BUF_BASE, 0, struct dma_buf_sync) @@ -44,7 +174,9 @@ struct dma_buf_sync { * between them in actual uapi, they're just different numbers. */ #define DMA_BUF_SET_NAME _IOW(DMA_BUF_BASE, 1, const char *) -#define DMA_BUF_SET_NAME_A _IOW(DMA_BUF_BASE, 1, u32) -#define DMA_BUF_SET_NAME_B _IOW(DMA_BUF_BASE, 1, u64) +#define DMA_BUF_SET_NAME_A _IOW(DMA_BUF_BASE, 1, __u32) +#define DMA_BUF_SET_NAME_B _IOW(DMA_BUF_BASE, 1, __u64) +#define DMA_BUF_IOCTL_EXPORT_SYNC_FILE _IOWR(DMA_BUF_BASE, 2, struct dma_buf_export_sync_file) +#define DMA_BUF_IOCTL_IMPORT_SYNC_FILE _IOW(DMA_BUF_BASE, 3, struct dma_buf_import_sync_file) #endif diff --git a/linux-headers/include/linux/dn.h b/linux-headers/include/linux/dn.h deleted file mode 100644 index 36ca71bd8bb..00000000000 --- a/linux-headers/include/linux/dn.h +++ /dev/null @@ -1,149 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _LINUX_DN_H -#define _LINUX_DN_H - -#include -#include -#include - -/* - - DECnet Data Structures and Constants - -*/ - -/* - * DNPROTO_NSP can't be the same as SOL_SOCKET, - * so increment each by one (compared to ULTRIX) - */ -#define DNPROTO_NSP 2 /* NSP protocol number */ -#define DNPROTO_ROU 3 /* Routing protocol number */ -#define DNPROTO_NML 4 /* Net mgt protocol number */ -#define DNPROTO_EVL 5 /* Evl protocol number (usr) */ -#define DNPROTO_EVR 6 /* Evl protocol number (evl) */ -#define DNPROTO_NSPT 7 /* NSP trace protocol number */ - - -#define DN_ADDL 2 -#define DN_MAXADDL 2 /* ULTRIX headers have 20 here, but pathworks has 2 */ -#define DN_MAXOPTL 16 -#define DN_MAXOBJL 16 -#define DN_MAXACCL 40 -#define DN_MAXALIASL 128 -#define DN_MAXNODEL 256 -#define DNBUFSIZE 65023 - -/* - * SET/GET Socket options - must match the DSO_ numbers below - */ -#define SO_CONDATA 1 -#define SO_CONACCESS 2 -#define SO_PROXYUSR 3 -#define SO_LINKINFO 7 - -#define DSO_CONDATA 1 /* Set/Get connect data */ -#define DSO_DISDATA 10 /* Set/Get disconnect data */ -#define DSO_CONACCESS 2 /* Set/Get connect access data */ -#define DSO_ACCEPTMODE 4 /* Set/Get accept mode */ -#define DSO_CONACCEPT 5 /* Accept deferred connection */ -#define DSO_CONREJECT 6 /* Reject deferred connection */ -#define DSO_LINKINFO 7 /* Set/Get link information */ -#define DSO_STREAM 8 /* Set socket type to stream */ -#define DSO_SEQPACKET 9 /* Set socket type to sequenced packet */ -#define DSO_MAXWINDOW 11 /* Maximum window size allowed */ -#define DSO_NODELAY 12 /* Turn off nagle */ -#define DSO_CORK 13 /* Wait for more data! */ -#define DSO_SERVICES 14 /* NSP Services field */ -#define DSO_INFO 15 /* NSP Info field */ -#define DSO_MAX 15 /* Maximum option number */ - - -/* LINK States */ -#define LL_INACTIVE 0 -#define LL_CONNECTING 1 -#define LL_RUNNING 2 -#define LL_DISCONNECTING 3 - -#define ACC_IMMED 0 -#define ACC_DEFER 1 - -#define SDF_WILD 1 /* Wild card object */ -#define SDF_PROXY 2 /* Addr eligible for proxy */ -#define SDF_UICPROXY 4 /* Use uic-based proxy */ - -/* Structures */ - - -struct dn_naddr { - __le16 a_len; - __u8 a_addr[DN_MAXADDL]; /* Two bytes little endian */ -}; - -struct sockaddr_dn { - __u16 sdn_family; - __u8 sdn_flags; - __u8 sdn_objnum; - __le16 sdn_objnamel; - __u8 sdn_objname[DN_MAXOBJL]; - struct dn_naddr sdn_add; -}; -#define sdn_nodeaddrl sdn_add.a_len /* Node address length */ -#define sdn_nodeaddr sdn_add.a_addr /* Node address */ - - - -/* - * DECnet set/get DSO_CONDATA, DSO_DISDATA (optional data) structure - */ -struct optdata_dn { - __le16 opt_status; /* Extended status return */ -#define opt_sts opt_status - __le16 opt_optl; /* Length of user data */ - __u8 opt_data[16]; /* User data */ -}; - -struct accessdata_dn { - __u8 acc_accl; - __u8 acc_acc[DN_MAXACCL]; - __u8 acc_passl; - __u8 acc_pass[DN_MAXACCL]; - __u8 acc_userl; - __u8 acc_user[DN_MAXACCL]; -}; - -/* - * DECnet logical link information structure - */ -struct linkinfo_dn { - __u16 idn_segsize; /* Segment size for link */ - __u8 idn_linkstate; /* Logical link state */ -}; - -/* - * Ethernet address format (for DECnet) - */ -union etheraddress { - __u8 dne_addr[ETH_ALEN]; /* Full ethernet address */ - struct { - __u8 dne_hiord[4]; /* DECnet HIORD prefix */ - __u8 dne_nodeaddr[2]; /* DECnet node address */ - } dne_remote; -}; - - -/* - * DECnet physical socket address format - */ -struct dn_addr { - __le16 dna_family; /* AF_DECnet */ - union etheraddress dna_netaddr; /* DECnet ethernet address */ -}; - -#define DECNET_IOCTL_BASE 0x89 /* PROTOPRIVATE range */ - -#define SIOCSNETADDR _IOW(DECNET_IOCTL_BASE, 0xe0, struct dn_naddr) -#define SIOCGNETADDR _IOR(DECNET_IOCTL_BASE, 0xe1, struct dn_naddr) -#define OSIOCSNETADDR _IOW(DECNET_IOCTL_BASE, 0xe0, int) -#define OSIOCGNETADDR _IOR(DECNET_IOCTL_BASE, 0xe1, int) - -#endif /* _LINUX_DN_H */ diff --git a/linux-headers/include/linux/dqblk_xfs.h b/linux-headers/include/linux/dqblk_xfs.h index c71d909addd..8cda3e62e0e 100644 --- a/linux-headers/include/linux/dqblk_xfs.h +++ b/linux-headers/include/linux/dqblk_xfs.h @@ -219,7 +219,10 @@ struct fs_quota_statv { __s32 qs_rtbtimelimit;/* limit for rt blks timer */ __u16 qs_bwarnlimit; /* limit for num warnings */ __u16 qs_iwarnlimit; /* limit for num warnings */ - __u64 qs_pad2[8]; /* for future proofing */ + __u16 qs_rtbwarnlimit;/* limit for rt blks warnings */ + __u16 qs_pad3; + __u32 qs_pad4; + __u64 qs_pad2[7]; /* for future proofing */ }; #endif /* _LINUX_DQBLK_XFS_H */ diff --git a/linux-headers/include/linux/dvb/audio.h b/linux-headers/include/linux/dvb/audio.h index 2f869da6917..77fb866890b 100644 --- a/linux-headers/include/linux/dvb/audio.h +++ b/linux-headers/include/linux/dvb/audio.h @@ -7,21 +7,6 @@ * Copyright (C) 2000 Ralph Metzler * & Marcus Metzler * for convergence integrated media GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Lesser Public License - * as published by the Free Software Foundation; either version 2.1 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * */ #ifndef _DVBAUDIO_H_ diff --git a/linux-headers/include/linux/dvb/ca.h b/linux-headers/include/linux/dvb/ca.h index 39c867002d4..15f4b8b04c7 100644 --- a/linux-headers/include/linux/dvb/ca.h +++ b/linux-headers/include/linux/dvb/ca.h @@ -5,21 +5,6 @@ * Copyright (C) 2000 Ralph Metzler * & Marcus Metzler * for convergence integrated media GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Lesser Public License - * as published by the Free Software Foundation; either version 2.1 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * */ #ifndef _DVBCA_H_ diff --git a/linux-headers/include/linux/dvb/dmx.h b/linux-headers/include/linux/dvb/dmx.h index f8a0aeae046..4606b335f64 100644 --- a/linux-headers/include/linux/dvb/dmx.h +++ b/linux-headers/include/linux/dvb/dmx.h @@ -5,21 +5,6 @@ * Copyright (C) 2000 Marcus Metzler * & Ralph Metzler * for convergence integrated media GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public License - * as published by the Free Software Foundation; either version 2.1 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * */ #ifndef _DVBDMX_H_ diff --git a/linux-headers/include/linux/dvb/frontend.h b/linux-headers/include/linux/dvb/frontend.h index 5f00fc1ff12..392171a7d65 100644 --- a/linux-headers/include/linux/dvb/frontend.h +++ b/linux-headers/include/linux/dvb/frontend.h @@ -7,21 +7,6 @@ * Holger Waechtler * Andre Draszik * for convergence integrated media GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public License - * as published by the Free Software Foundation; either version 2.1 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * */ #ifndef _DVBFRONTEND_H_ @@ -282,7 +267,6 @@ enum fe_spectral_inversion { /** * enum fe_code_rate - Type of Forward Error Correction (FEC) * - * * @FEC_NONE: No Forward Error Correction Code * @FEC_1_2: Forward Error Correction Code 1/2 * @FEC_2_3: Forward Error Correction Code 2/3 @@ -296,6 +280,26 @@ enum fe_spectral_inversion { * @FEC_3_5: Forward Error Correction Code 3/5 * @FEC_9_10: Forward Error Correction Code 9/10 * @FEC_2_5: Forward Error Correction Code 2/5 + * @FEC_1_3: Forward Error Correction Code 1/3 + * @FEC_1_4: Forward Error Correction Code 1/4 + * @FEC_5_9: Forward Error Correction Code 5/9 + * @FEC_7_9: Forward Error Correction Code 7/9 + * @FEC_8_15: Forward Error Correction Code 8/15 + * @FEC_11_15: Forward Error Correction Code 11/15 + * @FEC_13_18: Forward Error Correction Code 13/18 + * @FEC_9_20: Forward Error Correction Code 9/20 + * @FEC_11_20: Forward Error Correction Code 11/20 + * @FEC_23_36: Forward Error Correction Code 23/36 + * @FEC_25_36: Forward Error Correction Code 25/36 + * @FEC_13_45: Forward Error Correction Code 13/45 + * @FEC_26_45: Forward Error Correction Code 26/45 + * @FEC_28_45: Forward Error Correction Code 28/45 + * @FEC_32_45: Forward Error Correction Code 32/45 + * @FEC_77_90: Forward Error Correction Code 77/90 + * @FEC_11_45: Forward Error Correction Code 11/45 + * @FEC_4_15: Forward Error Correction Code 4/15 + * @FEC_14_45: Forward Error Correction Code 14/45 + * @FEC_7_15: Forward Error Correction Code 7/15 * * Please note that not all FEC types are supported by a given standard. */ @@ -313,6 +317,26 @@ enum fe_code_rate { FEC_3_5, FEC_9_10, FEC_2_5, + FEC_1_3, + FEC_1_4, + FEC_5_9, + FEC_7_9, + FEC_8_15, + FEC_11_15, + FEC_13_18, + FEC_9_20, + FEC_11_20, + FEC_23_36, + FEC_25_36, + FEC_13_45, + FEC_26_45, + FEC_28_45, + FEC_32_45, + FEC_77_90, + FEC_11_45, + FEC_4_15, + FEC_14_45, + FEC_7_15, }; /** @@ -331,6 +355,13 @@ enum fe_code_rate { * @APSK_32: 32-APSK modulation * @DQPSK: DQPSK modulation * @QAM_4_NR: 4-QAM-NR modulation + * @QAM_1024: 1024-QAM modulation + * @QAM_4096: 4096-QAM modulation + * @APSK_8_L: 8APSK-L modulation + * @APSK_16_L: 16APSK-L modulation + * @APSK_32_L: 32APSK-L modulation + * @APSK_64: 64APSK modulation + * @APSK_64_L: 64APSK-L modulation * * Please note that not all modulations are supported by a given standard. * @@ -350,6 +381,13 @@ enum fe_modulation { APSK_32, DQPSK, QAM_4_NR, + QAM_1024, + QAM_4096, + APSK_8_L, + APSK_16_L, + APSK_32_L, + APSK_64, + APSK_64_L, }; /** @@ -404,6 +442,7 @@ enum fe_transmit_mode { * @GUARD_INTERVAL_PN420: PN length 420 (1/4) * @GUARD_INTERVAL_PN595: PN length 595 (1/6) * @GUARD_INTERVAL_PN945: PN length 945 (1/9) + * @GUARD_INTERVAL_1_64: Guard interval 1/64 * * Please note that not all guard intervals are supported by a given standard. */ @@ -419,6 +458,7 @@ enum fe_guard_interval { GUARD_INTERVAL_PN420, GUARD_INTERVAL_PN595, GUARD_INTERVAL_PN945, + GUARD_INTERVAL_1_64, }; /** @@ -571,6 +611,9 @@ enum fe_pilot { * @ROLLOFF_20: Roloff factor: α=20% * @ROLLOFF_25: Roloff factor: α=25% * @ROLLOFF_AUTO: Auto-detect the roloff factor. + * @ROLLOFF_15: Rolloff factor: α=15% + * @ROLLOFF_10: Rolloff factor: α=10% + * @ROLLOFF_5: Rolloff factor: α=5% * * .. note: * @@ -581,6 +624,9 @@ enum fe_rolloff { ROLLOFF_20, ROLLOFF_25, ROLLOFF_AUTO, + ROLLOFF_15, + ROLLOFF_10, + ROLLOFF_5, }; /** @@ -594,6 +640,8 @@ enum fe_rolloff { * Cable TV: DVB-C following ITU-T J.83 Annex B spec (ClearQAM) * @SYS_DVBC_ANNEX_C: * Cable TV: DVB-C following ITU-T J.83 Annex C spec + * @SYS_DVBC2: + * Cable TV: DVB-C2 * @SYS_ISDBC: * Cable TV: ISDB-C (no drivers yet) * @SYS_DVBT: @@ -611,7 +659,7 @@ enum fe_rolloff { * @SYS_DVBS: * Satellite TV: DVB-S * @SYS_DVBS2: - * Satellite TV: DVB-S2 + * Satellite TV: DVB-S2 and DVB-S2X * @SYS_TURBO: * Satellite TV: DVB-S Turbo * @SYS_ISDBS: @@ -645,6 +693,7 @@ enum fe_delivery_system { SYS_DVBT2, SYS_TURBO, SYS_DVBC_ANNEX_C, + SYS_DVBC2, }; /* backward compatibility definitions for delivery systems */ @@ -720,7 +769,7 @@ enum atscmh_rs_frame_mode { }; /** - * enum atscmh_rs_code_mode + * enum atscmh_rs_code_mode - ATSC-M/H Reed Solomon modes * @ATSCMH_RSCODE_211_187: Reed Solomon code (211,187). * @ATSCMH_RSCODE_223_187: Reed Solomon code (223,187). * @ATSCMH_RSCODE_235_187: Reed Solomon code (235,187). diff --git a/linux-headers/include/linux/dvb/net.h b/linux-headers/include/linux/dvb/net.h index 0c550ef93f2..7cbb47ac38e 100644 --- a/linux-headers/include/linux/dvb/net.h +++ b/linux-headers/include/linux/dvb/net.h @@ -5,21 +5,6 @@ * Copyright (C) 2000 Marcus Metzler * & Ralph Metzler * for convergence integrated media GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public License - * as published by the Free Software Foundation; either version 2.1 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * */ #ifndef _DVBNET_H_ diff --git a/linux-headers/include/linux/dvb/osd.h b/linux-headers/include/linux/dvb/osd.h index 00ee6817157..2a9eda41196 100644 --- a/linux-headers/include/linux/dvb/osd.h +++ b/linux-headers/include/linux/dvb/osd.h @@ -7,21 +7,6 @@ * Copyright (C) 2001 Ralph Metzler * & Marcus Metzler * for convergence integrated media GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Lesser Public License - * as published by the Free Software Foundation; either version 2.1 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * */ #ifndef _DVBOSD_H_ diff --git a/linux-headers/include/linux/dvb/version.h b/linux-headers/include/linux/dvb/version.h index 2c5cffe6d2a..20bc874de32 100644 --- a/linux-headers/include/linux/dvb/version.h +++ b/linux-headers/include/linux/dvb/version.h @@ -4,27 +4,12 @@ * * Copyright (C) 2000 Holger Waechtler * for convergence integrated media GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public License - * as published by the Free Software Foundation; either version 2.1 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * */ #ifndef _DVBVERSION_H_ #define _DVBVERSION_H_ #define DVB_API_VERSION 5 -#define DVB_API_VERSION_MINOR 11 +#define DVB_API_VERSION_MINOR 12 #endif /*_DVBVERSION_H_*/ diff --git a/linux-headers/include/linux/dvb/video.h b/linux-headers/include/linux/dvb/video.h index 629aab998a0..d59b0f22fc7 100644 --- a/linux-headers/include/linux/dvb/video.h +++ b/linux-headers/include/linux/dvb/video.h @@ -7,21 +7,6 @@ * Copyright (C) 2000 Marcus Metzler * & Ralph Metzler * for convergence integrated media GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public License - * as published by the Free Software Foundation; either version 2.1 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * */ #ifndef _DVBVIDEO_H_ diff --git a/linux-headers/include/linux/dw100.h b/linux-headers/include/linux/dw100.h new file mode 100644 index 00000000000..3356496edd6 --- /dev/null +++ b/linux-headers/include/linux/dw100.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ +/* Copyright 2022 NXP */ + +#ifndef __UAPI_DW100_H__ +#define __UAPI_DW100_H__ + +#include + +/* + * Check Documentation/userspace-api/media/drivers/dw100.rst for control details. + */ +#define V4L2_CID_DW100_DEWARPING_16x16_VERTEX_MAP (V4L2_CID_USER_DW100_BASE + 1) + +#endif diff --git a/linux-headers/include/linux/elf-em.h b/linux-headers/include/linux/elf-em.h index f47e853546f..ef38c2bc5ab 100644 --- a/linux-headers/include/linux/elf-em.h +++ b/linux-headers/include/linux/elf-em.h @@ -51,6 +51,7 @@ #define EM_RISCV 243 /* RISC-V */ #define EM_BPF 247 /* Linux BPF - in-kernel virtual machine */ #define EM_CSKY 252 /* C-SKY */ +#define EM_LOONGARCH 258 /* LoongArch */ #define EM_FRV 0x5441 /* Fujitsu FR-V */ /* diff --git a/linux-headers/include/linux/elf-fdpic.h b/linux-headers/include/linux/elf-fdpic.h index d78419dcf03..6c0df5121a8 100644 --- a/linux-headers/include/linux/elf-fdpic.h +++ b/linux-headers/include/linux/elf-fdpic.h @@ -32,4 +32,19 @@ struct elf32_fdpic_loadmap { #define ELF32_FDPIC_LOADMAP_VERSION 0x0000 +/* segment mappings for ELF FDPIC libraries/executables/interpreters */ +struct elf64_fdpic_loadseg { + Elf64_Addr addr; /* core address to which mapped */ + Elf64_Addr p_vaddr; /* VMA recorded in file */ + Elf64_Word p_memsz; /* allocation size recorded in file */ +}; + +struct elf64_fdpic_loadmap { + Elf64_Half version; /* version of these structures, just in case... */ + Elf64_Half nsegs; /* number of segments */ + struct elf64_fdpic_loadseg segs[]; +}; + +#define ELF64_FDPIC_LOADMAP_VERSION 0x0000 + #endif /* _LINUX_ELF_FDPIC_H */ diff --git a/linux-headers/include/linux/elf.h b/linux-headers/include/linux/elf.h index 0ccfa12c5a2..2992ee4797c 100644 --- a/linux-headers/include/linux/elf.h +++ b/linux-headers/include/linux/elf.h @@ -35,10 +35,14 @@ typedef __s64 Elf64_Sxword; #define PT_HIOS 0x6fffffff /* OS-specific */ #define PT_LOPROC 0x70000000 #define PT_HIPROC 0x7fffffff -#define PT_GNU_EH_FRAME 0x6474e550 -#define PT_GNU_PROPERTY 0x6474e553 - +#define PT_GNU_EH_FRAME (PT_LOOS + 0x474e550) #define PT_GNU_STACK (PT_LOOS + 0x474e551) +#define PT_GNU_RELRO (PT_LOOS + 0x474e552) +#define PT_GNU_PROPERTY (PT_LOOS + 0x474e553) + + +/* ARM MTE memory tag segment type */ +#define PT_AARCH64_MEMTAG_MTE (PT_LOPROC + 0x2) /* * Extended Numbering @@ -87,7 +91,7 @@ typedef __s64 Elf64_Sxword; #define DT_INIT 12 #define DT_FINI 13 #define DT_SONAME 14 -#define DT_RPATH 15 +#define DT_RPATH 15 #define DT_SYMBOLIC 16 #define DT_REL 17 #define DT_RELSZ 18 @@ -130,15 +134,15 @@ typedef __s64 Elf64_Sxword; #define STT_TLS 6 #define ELF_ST_BIND(x) ((x) >> 4) -#define ELF_ST_TYPE(x) (((unsigned int) x) & 0xf) +#define ELF_ST_TYPE(x) ((x) & 0xf) #define ELF32_ST_BIND(x) ELF_ST_BIND(x) #define ELF32_ST_TYPE(x) ELF_ST_TYPE(x) #define ELF64_ST_BIND(x) ELF_ST_BIND(x) #define ELF64_ST_TYPE(x) ELF_ST_TYPE(x) -typedef struct dynamic{ +typedef struct dynamic { Elf32_Sword d_tag; - union{ + union { Elf32_Sword d_val; Elf32_Addr d_ptr; } d_un; @@ -169,7 +173,7 @@ typedef struct elf64_rel { Elf64_Xword r_info; /* index and type of relocation */ } Elf64_Rel; -typedef struct elf32_rela{ +typedef struct elf32_rela { Elf32_Addr r_offset; Elf32_Word r_info; Elf32_Sword r_addend; @@ -181,7 +185,7 @@ typedef struct elf64_rela { Elf64_Sxword r_addend; /* Constant addend used to compute value */ } Elf64_Rela; -typedef struct elf32_sym{ +typedef struct elf32_sym { Elf32_Word st_name; Elf32_Addr st_value; Elf32_Word st_size; @@ -202,7 +206,7 @@ typedef struct elf64_sym { #define EI_NIDENT 16 -typedef struct elf32_hdr{ +typedef struct elf32_hdr { unsigned char e_ident[EI_NIDENT]; Elf32_Half e_type; Elf32_Half e_machine; @@ -242,7 +246,7 @@ typedef struct elf64_hdr { #define PF_W 0x2 #define PF_X 0x1 -typedef struct elf32_phdr{ +typedef struct elf32_phdr { Elf32_Word p_type; Elf32_Off p_offset; Elf32_Addr p_vaddr; @@ -368,7 +372,8 @@ typedef struct elf64_shdr { * Notes used in ET_CORE. Architectures export some of the arch register sets * using the corresponding note types via the PTRACE_GETREGSET and * PTRACE_SETREGSET requests. - * The note name for all these is "LINUX". + * The note name for these types is "LINUX", except NT_PRFPREG that is named + * "CORE". */ #define NT_PRSTATUS 1 #define NT_PRFPREG 2 @@ -399,9 +404,13 @@ typedef struct elf64_shdr { #define NT_PPC_TM_CPPR 0x10e /* TM checkpointed Program Priority Register */ #define NT_PPC_TM_CDSCR 0x10f /* TM checkpointed Data Stream Control Register */ #define NT_PPC_PKEY 0x110 /* Memory Protection Keys registers */ +#define NT_PPC_DEXCR 0x111 /* PowerPC DEXCR registers */ +#define NT_PPC_HASHKEYR 0x112 /* PowerPC HASHKEYR register */ #define NT_386_TLS 0x200 /* i386 TLS slots (struct user_desc) */ #define NT_386_IOPERM 0x201 /* x86 io permission bitmap (1=deny) */ #define NT_X86_XSTATE 0x202 /* x86 extended state using xsave */ +/* Old binutils treats 0x203 as a CET state */ +#define NT_X86_SHSTK 0x204 /* x86 SHSTK state */ #define NT_S390_HIGH_GPRS 0x300 /* s390 upper register halves */ #define NT_S390_TIMER 0x301 /* s390 timer register */ #define NT_S390_TODCMP 0x302 /* s390 TOD clock comparator register */ @@ -416,6 +425,7 @@ typedef struct elf64_shdr { #define NT_S390_GS_CB 0x30b /* s390 guarded storage registers */ #define NT_S390_GS_BC 0x30c /* s390 guarded storage broadcast control block */ #define NT_S390_RI_CB 0x30d /* s390 runtime instrumentation */ +#define NT_S390_PV_CPU_DATA 0x30e /* s390 protvirt cpu dump data */ #define NT_ARM_VFP 0x400 /* ARM VFP/NEON registers */ #define NT_ARM_TLS 0x401 /* ARM TLS register */ #define NT_ARM_HW_BREAK 0x402 /* ARM hardware breakpoint registers */ @@ -426,11 +436,24 @@ typedef struct elf64_shdr { #define NT_ARM_PACA_KEYS 0x407 /* ARM pointer authentication address keys */ #define NT_ARM_PACG_KEYS 0x408 /* ARM pointer authentication generic key */ #define NT_ARM_TAGGED_ADDR_CTRL 0x409 /* arm64 tagged address control (prctl()) */ +#define NT_ARM_PAC_ENABLED_KEYS 0x40a /* arm64 ptr auth enabled keys (prctl()) */ +#define NT_ARM_SSVE 0x40b /* ARM Streaming SVE registers */ +#define NT_ARM_ZA 0x40c /* ARM SME ZA registers */ +#define NT_ARM_ZT 0x40d /* ARM SME ZT registers */ #define NT_ARC_V2 0x600 /* ARCv2 accumulator/extra registers */ #define NT_VMCOREDD 0x700 /* Vmcore Device Dump Note */ #define NT_MIPS_DSP 0x800 /* MIPS DSP ASE registers */ #define NT_MIPS_FP_MODE 0x801 /* MIPS floating-point mode */ #define NT_MIPS_MSA 0x802 /* MIPS SIMD registers */ +#define NT_RISCV_CSR 0x900 /* RISC-V Control and Status Registers */ +#define NT_RISCV_VECTOR 0x901 /* RISC-V vector registers */ +#define NT_LOONGARCH_CPUCFG 0xa00 /* LoongArch CPU config registers */ +#define NT_LOONGARCH_CSR 0xa01 /* LoongArch control and status registers */ +#define NT_LOONGARCH_LSX 0xa02 /* LoongArch Loongson SIMD Extension registers */ +#define NT_LOONGARCH_LASX 0xa03 /* LoongArch Loongson Advanced SIMD Extension registers */ +#define NT_LOONGARCH_LBT 0xa04 /* LoongArch Loongson Binary Translation registers */ +#define NT_LOONGARCH_HW_BREAK 0xa05 /* LoongArch hardware breakpoint registers */ +#define NT_LOONGARCH_HW_WATCH 0xa06 /* LoongArch hardware watchpoint registers */ /* Note types with note name "GNU" */ #define NT_GNU_PROPERTY_TYPE_0 5 diff --git a/linux-headers/include/linux/ethtool.h b/linux-headers/include/linux/ethtool.h index a951137bdba..1d0731b3d28 100644 --- a/linux-headers/include/linux/ethtool.h +++ b/linux-headers/include/linux/ethtool.h @@ -24,6 +24,14 @@ * have the same layout for 32-bit and 64-bit userland. */ +/* Note on reserved space. + * Reserved fields must not be accessed directly by user space because + * they may be replaced by a different field in the future. They must + * be initialized to zero before making the request, e.g. via memset + * of the entire structure or implicitly by not being set in a structure + * initializer. + */ + /** * struct ethtool_cmd - DEPRECATED, link control and status * This structure is DEPRECATED, please use struct ethtool_link_settings. @@ -65,6 +73,7 @@ * and other link features that the link partner advertised * through autonegotiation; 0 if unknown or not applicable. * Read-only. + * @reserved: Reserved for future use; see the note on reserved space. * * The link speed in Mbps is split between @speed and @speed_hi. Use * the ethtool_cmd_speed() and ethtool_cmd_speed_set() functions to @@ -148,11 +157,14 @@ static __inline__ __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep) * in its bus driver structure (e.g. pci_driver::name). Must * not be an empty string. * @version: Driver version string; may be an empty string - * @fw_version: Firmware version string; may be an empty string - * @erom_version: Expansion ROM version string; may be an empty string + * @fw_version: Firmware version string; driver defined; may be an + * empty string + * @erom_version: Expansion ROM version string; driver defined; may be + * an empty string * @bus_info: Device bus address. This should match the dev_name() * string for the underlying bus device, if there is one. May be * an empty string. + * @reserved2: Reserved for future use; see the note on reserved space. * @n_priv_flags: Number of flags valid for %ETHTOOL_GPFLAGS and * %ETHTOOL_SPFLAGS commands; also the number of strings in the * %ETH_SS_PRIV_FLAGS set @@ -167,10 +179,6 @@ static __inline__ __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep) * * Users can use the %ETHTOOL_GSSET_INFO command to get the number of * strings in any string set (from Linux 2.6.34). - * - * Drivers should set at most @driver, @version, @fw_version and - * @bus_info in their get_drvinfo() implementation. The ethtool - * core fills in the other fields using other driver operations. */ struct ethtool_drvinfo { __u32 cmd; @@ -219,9 +227,10 @@ enum tunable_id { ETHTOOL_RX_COPYBREAK, ETHTOOL_TX_COPYBREAK, ETHTOOL_PFC_PREVENTION_TOUT, /* timeout in msecs */ + ETHTOOL_TX_COPYBREAK_BUF_SIZE, /* * Add your fresh new tunable attribute above and remember to update - * tunable_strings[] in net/core/ethtool.c + * tunable_strings[] in net/ethtool/common.c */ __ETHTOOL_TUNABLE_COUNT, }; @@ -244,7 +253,7 @@ struct ethtool_tunable { __u32 id; __u32 type_id; __u32 len; - void *data[0]; + void *data[]; }; #define DOWNSHIFT_DEV_DEFAULT_COUNT 0xff @@ -285,7 +294,7 @@ enum phy_tunable_id { ETHTOOL_PHY_EDPD, /* * Add your fresh new phy tunable attribute above and remember to update - * phy_tunable_strings[] in net/core/ethtool.c + * phy_tunable_strings[] in net/ethtool/common.c */ __ETHTOOL_PHY_TUNABLE_COUNT, }; @@ -309,7 +318,7 @@ struct ethtool_regs { __u32 cmd; __u32 version; __u32 len; - __u8 data[0]; + __u8 data[]; }; /** @@ -335,7 +344,7 @@ struct ethtool_eeprom { __u32 magic; __u32 offset; __u32 len; - __u8 data[0]; + __u8 data[]; }; /** @@ -354,6 +363,7 @@ struct ethtool_eeprom { * @tx_lpi_timer: Time in microseconds the interface delays prior to asserting * its tx lpi (after reaching 'idle' state). Effective only when eee * was negotiated and tx_lpi_enabled was set. + * @reserved: Reserved for future use; see the note on reserved space. */ struct ethtool_eee { __u32 cmd; @@ -372,6 +382,7 @@ struct ethtool_eee { * @cmd: %ETHTOOL_GMODULEINFO * @type: Standard the module information conforms to %ETH_MODULE_SFF_xxxx * @eeprom_len: Length of the eeprom + * @reserved: Reserved for future use; see the note on reserved space. * * This structure is used to return the information to * properly size memory for a subsequent call to %ETHTOOL_GMODULEEEPROM. @@ -577,9 +588,7 @@ struct ethtool_pauseparam { __u32 tx_pause; }; -/** - * enum ethtool_link_ext_state - link extended state - */ +/* Link extended state */ enum ethtool_link_ext_state { ETHTOOL_LINK_EXT_STATE_AUTONEG, ETHTOOL_LINK_EXT_STATE_LINK_TRAINING_FAILURE, @@ -591,12 +600,10 @@ enum ethtool_link_ext_state { ETHTOOL_LINK_EXT_STATE_CALIBRATION_FAILURE, ETHTOOL_LINK_EXT_STATE_POWER_BUDGET_EXCEEDED, ETHTOOL_LINK_EXT_STATE_OVERHEAT, + ETHTOOL_LINK_EXT_STATE_MODULE, }; -/** - * enum ethtool_link_ext_substate_autoneg - more information in addition to - * ETHTOOL_LINK_EXT_STATE_AUTONEG. - */ +/* More information in addition to ETHTOOL_LINK_EXT_STATE_AUTONEG. */ enum ethtool_link_ext_substate_autoneg { ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_PARTNER_DETECTED = 1, ETHTOOL_LINK_EXT_SUBSTATE_AN_ACK_NOT_RECEIVED, @@ -606,9 +613,7 @@ enum ethtool_link_ext_substate_autoneg { ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_HCD, }; -/** - * enum ethtool_link_ext_substate_link_training - more information in addition to - * ETHTOOL_LINK_EXT_STATE_LINK_TRAINING_FAILURE. +/* More information in addition to ETHTOOL_LINK_EXT_STATE_LINK_TRAINING_FAILURE. */ enum ethtool_link_ext_substate_link_training { ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_FRAME_LOCK_NOT_ACQUIRED = 1, @@ -617,9 +622,7 @@ enum ethtool_link_ext_substate_link_training { ETHTOOL_LINK_EXT_SUBSTATE_LT_REMOTE_FAULT, }; -/** - * enum ethtool_link_ext_substate_logical_mismatch - more information in addition - * to ETHTOOL_LINK_EXT_STATE_LINK_LOGICAL_MISMATCH. +/* More information in addition to ETHTOOL_LINK_EXT_STATE_LINK_LOGICAL_MISMATCH. */ enum ethtool_link_ext_substate_link_logical_mismatch { ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_ACQUIRE_BLOCK_LOCK = 1, @@ -629,24 +632,26 @@ enum ethtool_link_ext_substate_link_logical_mismatch { ETHTOOL_LINK_EXT_SUBSTATE_LLM_RS_FEC_IS_NOT_LOCKED, }; -/** - * enum ethtool_link_ext_substate_bad_signal_integrity - more information in - * addition to ETHTOOL_LINK_EXT_STATE_BAD_SIGNAL_INTEGRITY. +/* More information in addition to ETHTOOL_LINK_EXT_STATE_BAD_SIGNAL_INTEGRITY. */ enum ethtool_link_ext_substate_bad_signal_integrity { ETHTOOL_LINK_EXT_SUBSTATE_BSI_LARGE_NUMBER_OF_PHYSICAL_ERRORS = 1, ETHTOOL_LINK_EXT_SUBSTATE_BSI_UNSUPPORTED_RATE, + ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_REFERENCE_CLOCK_LOST, + ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_ALOS, }; -/** - * enum ethtool_link_ext_substate_cable_issue - more information in - * addition to ETHTOOL_LINK_EXT_STATE_CABLE_ISSUE. - */ +/* More information in addition to ETHTOOL_LINK_EXT_STATE_CABLE_ISSUE. */ enum ethtool_link_ext_substate_cable_issue { ETHTOOL_LINK_EXT_SUBSTATE_CI_UNSUPPORTED_CABLE = 1, ETHTOOL_LINK_EXT_SUBSTATE_CI_CABLE_TEST_FAILURE, }; +/* More information in addition to ETHTOOL_LINK_EXT_STATE_MODULE. */ +enum ethtool_link_ext_substate_module { + ETHTOOL_LINK_EXT_SUBSTATE_MODULE_CMIS_NOT_READY = 1, +}; + #define ETH_GSTRING_LEN 32 /** @@ -659,6 +664,7 @@ enum ethtool_link_ext_substate_cable_issue { * now deprecated * @ETH_SS_FEATURES: Device feature names * @ETH_SS_RSS_HASH_FUNCS: RSS hush function names + * @ETH_SS_TUNABLES: tunable names * @ETH_SS_PHY_STATS: Statistic names, for use with %ETHTOOL_GPHYSTATS * @ETH_SS_PHY_TUNABLES: PHY tunable names * @ETH_SS_LINK_MODES: link mode names @@ -668,6 +674,13 @@ enum ethtool_link_ext_substate_cable_issue { * @ETH_SS_TS_TX_TYPES: timestamping Tx types * @ETH_SS_TS_RX_FILTERS: timestamping Rx filters * @ETH_SS_UDP_TUNNEL_TYPES: UDP tunnel types + * @ETH_SS_STATS_STD: standardized stats + * @ETH_SS_STATS_ETH_PHY: names of IEEE 802.3 PHY statistics + * @ETH_SS_STATS_ETH_MAC: names of IEEE 802.3 MAC statistics + * @ETH_SS_STATS_ETH_CTRL: names of IEEE 802.3 MAC Control statistics + * @ETH_SS_STATS_RMON: names of RMON statistics + * + * @ETH_SS_COUNT: number of defined string sets */ enum ethtool_stringset { ETH_SS_TEST = 0, @@ -686,11 +699,127 @@ enum ethtool_stringset { ETH_SS_TS_TX_TYPES, ETH_SS_TS_RX_FILTERS, ETH_SS_UDP_TUNNEL_TYPES, + ETH_SS_STATS_STD, + ETH_SS_STATS_ETH_PHY, + ETH_SS_STATS_ETH_MAC, + ETH_SS_STATS_ETH_CTRL, + ETH_SS_STATS_RMON, /* add new constants above here */ ETH_SS_COUNT }; +/** + * enum ethtool_mac_stats_src - source of ethtool MAC statistics + * @ETHTOOL_MAC_STATS_SRC_AGGREGATE: + * if device supports a MAC merge layer, this retrieves the aggregate + * statistics of the eMAC and pMAC. Otherwise, it retrieves just the + * statistics of the single (express) MAC. + * @ETHTOOL_MAC_STATS_SRC_EMAC: + * if device supports a MM layer, this retrieves the eMAC statistics. + * Otherwise, it retrieves the statistics of the single (express) MAC. + * @ETHTOOL_MAC_STATS_SRC_PMAC: + * if device supports a MM layer, this retrieves the pMAC statistics. + */ +enum ethtool_mac_stats_src { + ETHTOOL_MAC_STATS_SRC_AGGREGATE, + ETHTOOL_MAC_STATS_SRC_EMAC, + ETHTOOL_MAC_STATS_SRC_PMAC, +}; + +/** + * enum ethtool_module_power_mode_policy - plug-in module power mode policy + * @ETHTOOL_MODULE_POWER_MODE_POLICY_HIGH: Module is always in high power mode. + * @ETHTOOL_MODULE_POWER_MODE_POLICY_AUTO: Module is transitioned by the host + * to high power mode when the first port using it is put administratively + * up and to low power mode when the last port using it is put + * administratively down. + */ +enum ethtool_module_power_mode_policy { + ETHTOOL_MODULE_POWER_MODE_POLICY_HIGH = 1, + ETHTOOL_MODULE_POWER_MODE_POLICY_AUTO, +}; + +/** + * enum ethtool_module_power_mode - plug-in module power mode + * @ETHTOOL_MODULE_POWER_MODE_LOW: Module is in low power mode. + * @ETHTOOL_MODULE_POWER_MODE_HIGH: Module is in high power mode. + */ +enum ethtool_module_power_mode { + ETHTOOL_MODULE_POWER_MODE_LOW = 1, + ETHTOOL_MODULE_POWER_MODE_HIGH, +}; + +/** + * enum ethtool_podl_pse_admin_state - operational state of the PoDL PSE + * functions. IEEE 802.3-2018 30.15.1.1.2 aPoDLPSEAdminState + * @ETHTOOL_PODL_PSE_ADMIN_STATE_UNKNOWN: state of PoDL PSE functions are + * unknown + * @ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED: PoDL PSE functions are disabled + * @ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED: PoDL PSE functions are enabled + */ +enum ethtool_podl_pse_admin_state { + ETHTOOL_PODL_PSE_ADMIN_STATE_UNKNOWN = 1, + ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED, + ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED, +}; + +/** + * enum ethtool_podl_pse_pw_d_status - power detection status of the PoDL PSE. + * IEEE 802.3-2018 30.15.1.1.3 aPoDLPSEPowerDetectionStatus: + * @ETHTOOL_PODL_PSE_PW_D_STATUS_UNKNOWN: PoDL PSE + * @ETHTOOL_PODL_PSE_PW_D_STATUS_DISABLED: "The enumeration “disabled” is + * asserted true when the PoDL PSE state diagram variable mr_pse_enable is + * false" + * @ETHTOOL_PODL_PSE_PW_D_STATUS_SEARCHING: "The enumeration “searching” is + * asserted true when either of the PSE state diagram variables + * pi_detecting or pi_classifying is true." + * @ETHTOOL_PODL_PSE_PW_D_STATUS_DELIVERING: "The enumeration “deliveringPower” + * is asserted true when the PoDL PSE state diagram variable pi_powered is + * true." + * @ETHTOOL_PODL_PSE_PW_D_STATUS_SLEEP: "The enumeration “sleep” is asserted + * true when the PoDL PSE state diagram variable pi_sleeping is true." + * @ETHTOOL_PODL_PSE_PW_D_STATUS_IDLE: "The enumeration “idle” is asserted true + * when the logical combination of the PoDL PSE state diagram variables + * pi_prebiased*!pi_sleeping is true." + * @ETHTOOL_PODL_PSE_PW_D_STATUS_ERROR: "The enumeration “error” is asserted + * true when the PoDL PSE state diagram variable overload_held is true." + */ +enum ethtool_podl_pse_pw_d_status { + ETHTOOL_PODL_PSE_PW_D_STATUS_UNKNOWN = 1, + ETHTOOL_PODL_PSE_PW_D_STATUS_DISABLED, + ETHTOOL_PODL_PSE_PW_D_STATUS_SEARCHING, + ETHTOOL_PODL_PSE_PW_D_STATUS_DELIVERING, + ETHTOOL_PODL_PSE_PW_D_STATUS_SLEEP, + ETHTOOL_PODL_PSE_PW_D_STATUS_IDLE, + ETHTOOL_PODL_PSE_PW_D_STATUS_ERROR, +}; + +/** + * enum ethtool_mm_verify_status - status of MAC Merge Verify function + * @ETHTOOL_MM_VERIFY_STATUS_UNKNOWN: + * verification status is unknown + * @ETHTOOL_MM_VERIFY_STATUS_INITIAL: + * the 802.3 Verify State diagram is in the state INIT_VERIFICATION + * @ETHTOOL_MM_VERIFY_STATUS_VERIFYING: + * the Verify State diagram is in the state VERIFICATION_IDLE, + * SEND_VERIFY or WAIT_FOR_RESPONSE + * @ETHTOOL_MM_VERIFY_STATUS_SUCCEEDED: + * indicates that the Verify State diagram is in the state VERIFIED + * @ETHTOOL_MM_VERIFY_STATUS_FAILED: + * the Verify State diagram is in the state VERIFY_FAIL + * @ETHTOOL_MM_VERIFY_STATUS_DISABLED: + * verification of preemption operation is disabled + */ +enum ethtool_mm_verify_status { + ETHTOOL_MM_VERIFY_STATUS_UNKNOWN, + ETHTOOL_MM_VERIFY_STATUS_INITIAL, + ETHTOOL_MM_VERIFY_STATUS_VERIFYING, + ETHTOOL_MM_VERIFY_STATUS_SUCCEEDED, + ETHTOOL_MM_VERIFY_STATUS_FAILED, + ETHTOOL_MM_VERIFY_STATUS_DISABLED, +}; + /** * struct ethtool_gstrings - string set for data tagging * @cmd: Command number = %ETHTOOL_GSTRINGS @@ -707,12 +836,13 @@ struct ethtool_gstrings { __u32 cmd; __u32 string_set; __u32 len; - __u8 data[0]; + __u8 data[]; }; /** * struct ethtool_sset_info - string set information * @cmd: Command number = %ETHTOOL_GSSET_INFO + * @reserved: Reserved for future use; see the note on reserved space. * @sset_mask: On entry, a bitmask of string sets to query, with bits * numbered according to &enum ethtool_stringset. On return, a * bitmask of those string sets queried that are supported. @@ -731,7 +861,7 @@ struct ethtool_sset_info { __u32 cmd; __u32 reserved; __u64 sset_mask; - __u32 data[0]; + __u32 data[]; }; /** @@ -757,6 +887,7 @@ enum ethtool_test_flags { * @flags: A bitmask of flags from &enum ethtool_test_flags. Some * flags may be set by the user on entry; others may be set by * the driver on return. + * @reserved: Reserved for future use; see the note on reserved space. * @len: On return, the number of test results * @data: Array of test results * @@ -770,7 +901,7 @@ struct ethtool_test { __u32 flags; __u32 reserved; __u32 len; - __u64 data[0]; + __u64 data[]; }; /** @@ -787,7 +918,7 @@ struct ethtool_test { struct ethtool_stats { __u32 cmd; __u32 n_stats; - __u64 data[0]; + __u64 data[]; }; /** @@ -804,7 +935,7 @@ struct ethtool_stats { struct ethtool_perm_addr { __u32 cmd; __u32 size; - __u8 data[0]; + __u8 data[]; }; /* boolean flags controlling per-interface behavior characteristics. @@ -957,6 +1088,7 @@ union ethtool_flow_union { * @vlan_etype: VLAN EtherType * @vlan_tci: VLAN tag control information * @data: user defined data + * @padding: Reserved for future use; see the note on reserved space. * * Note, @vlan_etype, @vlan_tci, and @data are only valid if %FLOW_EXT * is set in &struct ethtool_rx_flow_spec @flow_type. @@ -1092,7 +1224,7 @@ struct ethtool_rxnfc { __u32 rule_cnt; __u32 rss_context; }; - __u32 rule_locs[0]; + __u32 rule_locs[]; }; @@ -1112,7 +1244,7 @@ struct ethtool_rxnfc { struct ethtool_rxfh_indir { __u32 cmd; __u32 size; - __u32 ring_index[0]; + __u32 ring_index[]; }; /** @@ -1132,7 +1264,8 @@ struct ethtool_rxfh_indir { * hardware hash key. * @hfunc: Defines the current RSS hash function used by HW (or to be set to). * Valid values are one of the %ETH_RSS_HASH_*. - * @rsvd: Reserved for future extensions. + * @rsvd8: Reserved for future use; see the note on reserved space. + * @rsvd32: Reserved for future use; see the note on reserved space. * @rss_config: RX ring/queue index for each hash value i.e., indirection table * of @indir_size __u32 elements, followed by hash key of @key_size * bytes. @@ -1152,7 +1285,7 @@ struct ethtool_rxfh { __u8 hfunc; __u8 rsvd8[3]; __u32 rsvd32; - __u32 rss_config[0]; + __u32 rss_config[]; }; #define ETH_RXFH_CONTEXT_ALLOC 0xffffffff #define ETH_RXFH_INDIR_NO_CHANGE 0xffffffff @@ -1237,7 +1370,7 @@ struct ethtool_dump { __u32 version; __u32 flag; __u32 len; - __u8 data[0]; + __u8 data[]; }; #define ETH_FW_DUMP_DISABLE 0 @@ -1269,7 +1402,7 @@ struct ethtool_get_features_block { struct ethtool_gfeatures { __u32 cmd; __u32 size; - struct ethtool_get_features_block features[0]; + struct ethtool_get_features_block features[]; }; /** @@ -1291,7 +1424,7 @@ struct ethtool_set_features_block { struct ethtool_sfeatures { __u32 cmd; __u32 size; - struct ethtool_set_features_block features[0]; + struct ethtool_set_features_block features[]; }; /** @@ -1300,7 +1433,9 @@ struct ethtool_sfeatures { * @so_timestamping: bit mask of the sum of the supported SO_TIMESTAMPING flags * @phc_index: device index of the associated PHC, or -1 if there is none * @tx_types: bit mask of the supported hwtstamp_tx_types enumeration values + * @tx_reserved: Reserved for future use; see the note on reserved space. * @rx_filters: bit mask of the supported hwtstamp_rx_filters enumeration values + * @rx_reserved: Reserved for future use; see the note on reserved space. * * The bits in the 'tx_types' and 'rx_filters' fields correspond to * the 'hwtstamp_tx_types' and 'hwtstamp_rx_filters' enumeration values, @@ -1374,15 +1509,33 @@ struct ethtool_per_queue_op { }; /** - * struct ethtool_fecparam - Ethernet forward error correction(fec) parameters + * struct ethtool_fecparam - Ethernet Forward Error Correction parameters * @cmd: Command number = %ETHTOOL_GFECPARAM or %ETHTOOL_SFECPARAM - * @active_fec: FEC mode which is active on porte - * @fec: Bitmask of supported/configured FEC modes - * @rsvd: Reserved for future extensions. i.e FEC bypass feature. + * @active_fec: FEC mode which is active on the port, single bit set, GET only. + * @fec: Bitmask of configured FEC modes. + * @reserved: Reserved for future extensions, ignore on GET, write 0 for SET. * - * Drivers should reject a non-zero setting of @autoneg when - * autoneogotiation is disabled (or not supported) for the link. + * Note that @reserved was never validated on input and ethtool user space + * left it uninitialized when calling SET. Hence going forward it can only be + * used to return a value to userspace with GET. + * + * FEC modes supported by the device can be read via %ETHTOOL_GLINKSETTINGS. + * FEC settings are configured by link autonegotiation whenever it's enabled. + * With autoneg on %ETHTOOL_GFECPARAM can be used to read the current mode. * + * When autoneg is disabled %ETHTOOL_SFECPARAM controls the FEC settings. + * It is recommended that drivers only accept a single bit set in @fec. + * When multiple bits are set in @fec drivers may pick mode in an implementation + * dependent way. Drivers should reject mixing %ETHTOOL_FEC_AUTO_BIT with other + * FEC modes, because it's unclear whether in this case other modes constrain + * AUTO or are independent choices. + * Drivers must reject SET requests if they support none of the requested modes. + * + * If device does not support FEC drivers may use %ETHTOOL_FEC_NONE instead + * of returning %EOPNOTSUPP from %ETHTOOL_GFECPARAM. + * + * See enum ethtool_fec_config_bits for definition of valid bits for both + * @fec and @active_fec. */ struct ethtool_fecparam { __u32 cmd; @@ -1394,11 +1547,16 @@ struct ethtool_fecparam { /** * enum ethtool_fec_config_bits - flags definition of ethtool_fec_configuration - * @ETHTOOL_FEC_NONE: FEC mode configuration is not supported - * @ETHTOOL_FEC_AUTO: Default/Best FEC mode provided by driver - * @ETHTOOL_FEC_OFF: No FEC Mode - * @ETHTOOL_FEC_RS: Reed-Solomon Forward Error Detection mode - * @ETHTOOL_FEC_BASER: Base-R/Reed-Solomon Forward Error Detection mode + * @ETHTOOL_FEC_NONE_BIT: FEC mode configuration is not supported. Should not + * be used together with other bits. GET only. + * @ETHTOOL_FEC_AUTO_BIT: Select default/best FEC mode automatically, usually + * based link mode and SFP parameters read from module's + * EEPROM. This bit does _not_ mean autonegotiation. + * @ETHTOOL_FEC_OFF_BIT: No FEC Mode + * @ETHTOOL_FEC_RS_BIT: Reed-Solomon FEC Mode + * @ETHTOOL_FEC_BASER_BIT: Base-R/Reed-Solomon FEC Mode + * @ETHTOOL_FEC_LLRS_BIT: Low Latency Reed Solomon FEC Mode (25G/50G Ethernet + * Consortium) */ enum ethtool_fec_config_bits { ETHTOOL_FEC_NONE_BIT, @@ -1617,6 +1775,17 @@ enum ethtool_link_mode_bit_indices { ETHTOOL_LINK_MODE_400000baseCR4_Full_BIT = 89, ETHTOOL_LINK_MODE_100baseFX_Half_BIT = 90, ETHTOOL_LINK_MODE_100baseFX_Full_BIT = 91, + ETHTOOL_LINK_MODE_10baseT1L_Full_BIT = 92, + ETHTOOL_LINK_MODE_800000baseCR8_Full_BIT = 93, + ETHTOOL_LINK_MODE_800000baseKR8_Full_BIT = 94, + ETHTOOL_LINK_MODE_800000baseDR8_Full_BIT = 95, + ETHTOOL_LINK_MODE_800000baseDR8_2_Full_BIT = 96, + ETHTOOL_LINK_MODE_800000baseSR8_Full_BIT = 97, + ETHTOOL_LINK_MODE_800000baseVR8_Full_BIT = 98, + ETHTOOL_LINK_MODE_10baseT1S_Full_BIT = 99, + ETHTOOL_LINK_MODE_10baseT1S_Half_BIT = 100, + ETHTOOL_LINK_MODE_10baseT1S_P2MP_Half_BIT = 101, + /* must be last entry */ __ETHTOOL_LINK_MODE_MASK_NBITS }; @@ -1728,6 +1897,7 @@ enum ethtool_link_mode_bit_indices { #define SPEED_100000 100000 #define SPEED_200000 200000 #define SPEED_400000 400000 +#define SPEED_800000 800000 #define SPEED_UNKNOWN -1 @@ -1765,6 +1935,20 @@ static __inline__ int ethtool_validate_duplex(__u8 duplex) #define MASTER_SLAVE_STATE_SLAVE 3 #define MASTER_SLAVE_STATE_ERR 4 +/* These are used to throttle the rate of data on the phy interface when the + * native speed of the interface is higher than the link speed. These should + * not be used for phy interfaces which natively support multiple speeds (e.g. + * MII or SGMII). + */ +/* No rate matching performed. */ +#define RATE_MATCH_NONE 0 +/* The phy sends pause frames to throttle the MAC. */ +#define RATE_MATCH_PAUSE 1 +/* The phy asserts CRS to prevent the MAC from transmitting. */ +#define RATE_MATCH_CRS 2 +/* The MAC is programmed with a sufficiently-large IPG. */ +#define RATE_MATCH_OPEN_LOOP 3 + /* Which connector port. */ #define PORT_TP 0x00 #define PORT_AUI 0x01 @@ -1956,6 +2140,11 @@ enum ethtool_reset_flags { * autonegotiation; 0 if unknown or not applicable. Read-only. * @transceiver: Used to distinguish different possible PHY types, * reported consistently by PHYLIB. Read-only. + * @master_slave_cfg: Master/slave port mode. + * @master_slave_state: Master/slave port state. + * @rate_matching: Rate adaptation performed by the PHY + * @reserved: Reserved for future use; see the note on reserved space. + * @link_mode_masks: Variable length bitmaps. * * If autonegotiation is disabled, the speed and @duplex represent the * fixed link mode and are writable if the driver supports multiple @@ -2005,9 +2194,9 @@ struct ethtool_link_settings { __u8 transceiver; __u8 master_slave_cfg; __u8 master_slave_state; - __u8 reserved1[1]; + __u8 rate_matching; __u32 reserved[7]; - __u32 link_mode_masks[0]; + __u32 link_mode_masks[]; /* layout of link_mode_masks fields: * __u32 map_supported[link_mode_masks_nwords]; * __u32 map_advertising[link_mode_masks_nwords]; diff --git a/linux-headers/include/linux/ethtool_netlink.h b/linux-headers/include/linux/ethtool_netlink.h index c022883cdb2..a8b0d79dad9 100644 --- a/linux-headers/include/linux/ethtool_netlink.h +++ b/linux-headers/include/linux/ethtool_netlink.h @@ -42,6 +42,21 @@ enum { ETHTOOL_MSG_CABLE_TEST_ACT, ETHTOOL_MSG_CABLE_TEST_TDR_ACT, ETHTOOL_MSG_TUNNEL_INFO_GET, + ETHTOOL_MSG_FEC_GET, + ETHTOOL_MSG_FEC_SET, + ETHTOOL_MSG_MODULE_EEPROM_GET, + ETHTOOL_MSG_STATS_GET, + ETHTOOL_MSG_PHC_VCLOCKS_GET, + ETHTOOL_MSG_MODULE_GET, + ETHTOOL_MSG_MODULE_SET, + ETHTOOL_MSG_PSE_GET, + ETHTOOL_MSG_PSE_SET, + ETHTOOL_MSG_RSS_GET, + ETHTOOL_MSG_PLCA_GET_CFG, + ETHTOOL_MSG_PLCA_SET_CFG, + ETHTOOL_MSG_PLCA_GET_STATUS, + ETHTOOL_MSG_MM_GET, + ETHTOOL_MSG_MM_SET, /* add new constants above here */ __ETHTOOL_MSG_USER_CNT, @@ -80,6 +95,20 @@ enum { ETHTOOL_MSG_CABLE_TEST_NTF, ETHTOOL_MSG_CABLE_TEST_TDR_NTF, ETHTOOL_MSG_TUNNEL_INFO_GET_REPLY, + ETHTOOL_MSG_FEC_GET_REPLY, + ETHTOOL_MSG_FEC_NTF, + ETHTOOL_MSG_MODULE_EEPROM_GET_REPLY, + ETHTOOL_MSG_STATS_GET_REPLY, + ETHTOOL_MSG_PHC_VCLOCKS_GET_REPLY, + ETHTOOL_MSG_MODULE_GET_REPLY, + ETHTOOL_MSG_MODULE_NTF, + ETHTOOL_MSG_PSE_GET_REPLY, + ETHTOOL_MSG_RSS_GET_REPLY, + ETHTOOL_MSG_PLCA_GET_CFG_REPLY, + ETHTOOL_MSG_PLCA_GET_STATUS_REPLY, + ETHTOOL_MSG_PLCA_NTF, + ETHTOOL_MSG_MM_GET_REPLY, + ETHTOOL_MSG_MM_NTF, /* add new constants above here */ __ETHTOOL_MSG_KERNEL_CNT, @@ -227,6 +256,8 @@ enum { ETHTOOL_A_LINKMODES_DUPLEX, /* u8 */ ETHTOOL_A_LINKMODES_MASTER_SLAVE_CFG, /* u8 */ ETHTOOL_A_LINKMODES_MASTER_SLAVE_STATE, /* u8 */ + ETHTOOL_A_LINKMODES_LANES, /* u32 */ + ETHTOOL_A_LINKMODES_RATE_MATCHING, /* u8 */ /* add new constants above here */ __ETHTOOL_A_LINKMODES_CNT, @@ -243,6 +274,7 @@ enum { ETHTOOL_A_LINKSTATE_SQI_MAX, /* u32 */ ETHTOOL_A_LINKSTATE_EXT_STATE, /* u8 */ ETHTOOL_A_LINKSTATE_EXT_SUBSTATE, /* u8 */ + ETHTOOL_A_LINKSTATE_EXT_DOWN_CNT, /* u32 */ /* add new constants above here */ __ETHTOOL_A_LINKSTATE_CNT, @@ -303,6 +335,12 @@ enum { /* RINGS */ +enum { + ETHTOOL_TCP_DATA_SPLIT_UNKNOWN = 0, + ETHTOOL_TCP_DATA_SPLIT_DISABLED, + ETHTOOL_TCP_DATA_SPLIT_ENABLED, +}; + enum { ETHTOOL_A_RINGS_UNSPEC, ETHTOOL_A_RINGS_HEADER, /* nest - _A_HEADER_* */ @@ -314,6 +352,13 @@ enum { ETHTOOL_A_RINGS_RX_MINI, /* u32 */ ETHTOOL_A_RINGS_RX_JUMBO, /* u32 */ ETHTOOL_A_RINGS_TX, /* u32 */ + ETHTOOL_A_RINGS_RX_BUF_LEN, /* u32 */ + ETHTOOL_A_RINGS_TCP_DATA_SPLIT, /* u8 */ + ETHTOOL_A_RINGS_CQE_SIZE, /* u32 */ + ETHTOOL_A_RINGS_TX_PUSH, /* u8 */ + ETHTOOL_A_RINGS_RX_PUSH, /* u8 */ + ETHTOOL_A_RINGS_TX_PUSH_BUF_LEN, /* u32 */ + ETHTOOL_A_RINGS_TX_PUSH_BUF_LEN_MAX, /* u32 */ /* add new constants above here */ __ETHTOOL_A_RINGS_CNT, @@ -366,6 +411,11 @@ enum { ETHTOOL_A_COALESCE_TX_USECS_HIGH, /* u32 */ ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH, /* u32 */ ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL, /* u32 */ + ETHTOOL_A_COALESCE_USE_CQE_MODE_TX, /* u8 */ + ETHTOOL_A_COALESCE_USE_CQE_MODE_RX, /* u8 */ + ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES, /* u32 */ + ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES, /* u32 */ + ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS, /* u32 */ /* add new constants above here */ __ETHTOOL_A_COALESCE_CNT, @@ -381,6 +431,7 @@ enum { ETHTOOL_A_PAUSE_RX, /* u8 */ ETHTOOL_A_PAUSE_TX, /* u8 */ ETHTOOL_A_PAUSE_STATS, /* nest - _PAUSE_STAT_* */ + ETHTOOL_A_PAUSE_STATS_SRC, /* u32 */ /* add new constants above here */ __ETHTOOL_A_PAUSE_CNT, @@ -394,7 +445,9 @@ enum { ETHTOOL_A_PAUSE_STAT_TX_FRAMES, ETHTOOL_A_PAUSE_STAT_RX_FRAMES, - /* add new constants above here */ + /* add new constants above here + * adjust ETHTOOL_PAUSE_STAT_CNT if adding non-stats! + */ __ETHTOOL_A_PAUSE_STAT_CNT, ETHTOOL_A_PAUSE_STAT_MAX = (__ETHTOOL_A_PAUSE_STAT_CNT - 1) }; @@ -431,6 +484,19 @@ enum { ETHTOOL_A_TSINFO_MAX = (__ETHTOOL_A_TSINFO_CNT - 1) }; +/* PHC VCLOCKS */ + +enum { + ETHTOOL_A_PHC_VCLOCKS_UNSPEC, + ETHTOOL_A_PHC_VCLOCKS_HEADER, /* nest - _A_HEADER_* */ + ETHTOOL_A_PHC_VCLOCKS_NUM, /* u32 */ + ETHTOOL_A_PHC_VCLOCKS_INDEX, /* array, s32 */ + + /* add new constants above here */ + __ETHTOOL_A_PHC_VCLOCKS_CNT, + ETHTOOL_A_PHC_VCLOCKS_MAX = (__ETHTOOL_A_PHC_VCLOCKS_CNT - 1) +}; + /* CABLE TEST */ enum { @@ -628,6 +694,287 @@ enum { ETHTOOL_A_TUNNEL_INFO_MAX = (__ETHTOOL_A_TUNNEL_INFO_CNT - 1) }; +/* FEC */ + +enum { + ETHTOOL_A_FEC_UNSPEC, + ETHTOOL_A_FEC_HEADER, /* nest - _A_HEADER_* */ + ETHTOOL_A_FEC_MODES, /* bitset */ + ETHTOOL_A_FEC_AUTO, /* u8 */ + ETHTOOL_A_FEC_ACTIVE, /* u32 */ + ETHTOOL_A_FEC_STATS, /* nest - _A_FEC_STAT */ + + __ETHTOOL_A_FEC_CNT, + ETHTOOL_A_FEC_MAX = (__ETHTOOL_A_FEC_CNT - 1) +}; + +enum { + ETHTOOL_A_FEC_STAT_UNSPEC, + ETHTOOL_A_FEC_STAT_PAD, + + ETHTOOL_A_FEC_STAT_CORRECTED, /* array, u64 */ + ETHTOOL_A_FEC_STAT_UNCORR, /* array, u64 */ + ETHTOOL_A_FEC_STAT_CORR_BITS, /* array, u64 */ + + /* add new constants above here */ + __ETHTOOL_A_FEC_STAT_CNT, + ETHTOOL_A_FEC_STAT_MAX = (__ETHTOOL_A_FEC_STAT_CNT - 1) +}; + +/* MODULE EEPROM */ + +enum { + ETHTOOL_A_MODULE_EEPROM_UNSPEC, + ETHTOOL_A_MODULE_EEPROM_HEADER, /* nest - _A_HEADER_* */ + + ETHTOOL_A_MODULE_EEPROM_OFFSET, /* u32 */ + ETHTOOL_A_MODULE_EEPROM_LENGTH, /* u32 */ + ETHTOOL_A_MODULE_EEPROM_PAGE, /* u8 */ + ETHTOOL_A_MODULE_EEPROM_BANK, /* u8 */ + ETHTOOL_A_MODULE_EEPROM_I2C_ADDRESS, /* u8 */ + ETHTOOL_A_MODULE_EEPROM_DATA, /* binary */ + + __ETHTOOL_A_MODULE_EEPROM_CNT, + ETHTOOL_A_MODULE_EEPROM_MAX = (__ETHTOOL_A_MODULE_EEPROM_CNT - 1) +}; + +/* STATS */ + +enum { + ETHTOOL_A_STATS_UNSPEC, + ETHTOOL_A_STATS_PAD, + ETHTOOL_A_STATS_HEADER, /* nest - _A_HEADER_* */ + ETHTOOL_A_STATS_GROUPS, /* bitset */ + + ETHTOOL_A_STATS_GRP, /* nest - _A_STATS_GRP_* */ + + ETHTOOL_A_STATS_SRC, /* u32 */ + + /* add new constants above here */ + __ETHTOOL_A_STATS_CNT, + ETHTOOL_A_STATS_MAX = (__ETHTOOL_A_STATS_CNT - 1) +}; + +enum { + ETHTOOL_STATS_ETH_PHY, + ETHTOOL_STATS_ETH_MAC, + ETHTOOL_STATS_ETH_CTRL, + ETHTOOL_STATS_RMON, + + /* add new constants above here */ + __ETHTOOL_STATS_CNT +}; + +enum { + ETHTOOL_A_STATS_GRP_UNSPEC, + ETHTOOL_A_STATS_GRP_PAD, + + ETHTOOL_A_STATS_GRP_ID, /* u32 */ + ETHTOOL_A_STATS_GRP_SS_ID, /* u32 */ + + ETHTOOL_A_STATS_GRP_STAT, /* nest */ + + ETHTOOL_A_STATS_GRP_HIST_RX, /* nest */ + ETHTOOL_A_STATS_GRP_HIST_TX, /* nest */ + + ETHTOOL_A_STATS_GRP_HIST_BKT_LOW, /* u32 */ + ETHTOOL_A_STATS_GRP_HIST_BKT_HI, /* u32 */ + ETHTOOL_A_STATS_GRP_HIST_VAL, /* u64 */ + + /* add new constants above here */ + __ETHTOOL_A_STATS_GRP_CNT, + ETHTOOL_A_STATS_GRP_MAX = (__ETHTOOL_A_STATS_GRP_CNT - 1) +}; + +enum { + /* 30.3.2.1.5 aSymbolErrorDuringCarrier */ + ETHTOOL_A_STATS_ETH_PHY_5_SYM_ERR, + + /* add new constants above here */ + __ETHTOOL_A_STATS_ETH_PHY_CNT, + ETHTOOL_A_STATS_ETH_PHY_MAX = (__ETHTOOL_A_STATS_ETH_PHY_CNT - 1) +}; + +enum { + /* 30.3.1.1.2 aFramesTransmittedOK */ + ETHTOOL_A_STATS_ETH_MAC_2_TX_PKT, + /* 30.3.1.1.3 aSingleCollisionFrames */ + ETHTOOL_A_STATS_ETH_MAC_3_SINGLE_COL, + /* 30.3.1.1.4 aMultipleCollisionFrames */ + ETHTOOL_A_STATS_ETH_MAC_4_MULTI_COL, + /* 30.3.1.1.5 aFramesReceivedOK */ + ETHTOOL_A_STATS_ETH_MAC_5_RX_PKT, + /* 30.3.1.1.6 aFrameCheckSequenceErrors */ + ETHTOOL_A_STATS_ETH_MAC_6_FCS_ERR, + /* 30.3.1.1.7 aAlignmentErrors */ + ETHTOOL_A_STATS_ETH_MAC_7_ALIGN_ERR, + /* 30.3.1.1.8 aOctetsTransmittedOK */ + ETHTOOL_A_STATS_ETH_MAC_8_TX_BYTES, + /* 30.3.1.1.9 aFramesWithDeferredXmissions */ + ETHTOOL_A_STATS_ETH_MAC_9_TX_DEFER, + /* 30.3.1.1.10 aLateCollisions */ + ETHTOOL_A_STATS_ETH_MAC_10_LATE_COL, + /* 30.3.1.1.11 aFramesAbortedDueToXSColls */ + ETHTOOL_A_STATS_ETH_MAC_11_XS_COL, + /* 30.3.1.1.12 aFramesLostDueToIntMACXmitError */ + ETHTOOL_A_STATS_ETH_MAC_12_TX_INT_ERR, + /* 30.3.1.1.13 aCarrierSenseErrors */ + ETHTOOL_A_STATS_ETH_MAC_13_CS_ERR, + /* 30.3.1.1.14 aOctetsReceivedOK */ + ETHTOOL_A_STATS_ETH_MAC_14_RX_BYTES, + /* 30.3.1.1.15 aFramesLostDueToIntMACRcvError */ + ETHTOOL_A_STATS_ETH_MAC_15_RX_INT_ERR, + + /* 30.3.1.1.18 aMulticastFramesXmittedOK */ + ETHTOOL_A_STATS_ETH_MAC_18_TX_MCAST, + /* 30.3.1.1.19 aBroadcastFramesXmittedOK */ + ETHTOOL_A_STATS_ETH_MAC_19_TX_BCAST, + /* 30.3.1.1.20 aFramesWithExcessiveDeferral */ + ETHTOOL_A_STATS_ETH_MAC_20_XS_DEFER, + /* 30.3.1.1.21 aMulticastFramesReceivedOK */ + ETHTOOL_A_STATS_ETH_MAC_21_RX_MCAST, + /* 30.3.1.1.22 aBroadcastFramesReceivedOK */ + ETHTOOL_A_STATS_ETH_MAC_22_RX_BCAST, + /* 30.3.1.1.23 aInRangeLengthErrors */ + ETHTOOL_A_STATS_ETH_MAC_23_IR_LEN_ERR, + /* 30.3.1.1.24 aOutOfRangeLengthField */ + ETHTOOL_A_STATS_ETH_MAC_24_OOR_LEN, + /* 30.3.1.1.25 aFrameTooLongErrors */ + ETHTOOL_A_STATS_ETH_MAC_25_TOO_LONG_ERR, + + /* add new constants above here */ + __ETHTOOL_A_STATS_ETH_MAC_CNT, + ETHTOOL_A_STATS_ETH_MAC_MAX = (__ETHTOOL_A_STATS_ETH_MAC_CNT - 1) +}; + +enum { + /* 30.3.3.3 aMACControlFramesTransmitted */ + ETHTOOL_A_STATS_ETH_CTRL_3_TX, + /* 30.3.3.4 aMACControlFramesReceived */ + ETHTOOL_A_STATS_ETH_CTRL_4_RX, + /* 30.3.3.5 aUnsupportedOpcodesReceived */ + ETHTOOL_A_STATS_ETH_CTRL_5_RX_UNSUP, + + /* add new constants above here */ + __ETHTOOL_A_STATS_ETH_CTRL_CNT, + ETHTOOL_A_STATS_ETH_CTRL_MAX = (__ETHTOOL_A_STATS_ETH_CTRL_CNT - 1) +}; + +enum { + /* etherStatsUndersizePkts */ + ETHTOOL_A_STATS_RMON_UNDERSIZE, + /* etherStatsOversizePkts */ + ETHTOOL_A_STATS_RMON_OVERSIZE, + /* etherStatsFragments */ + ETHTOOL_A_STATS_RMON_FRAG, + /* etherStatsJabbers */ + ETHTOOL_A_STATS_RMON_JABBER, + + /* add new constants above here */ + __ETHTOOL_A_STATS_RMON_CNT, + ETHTOOL_A_STATS_RMON_MAX = (__ETHTOOL_A_STATS_RMON_CNT - 1) +}; + +/* MODULE */ + +enum { + ETHTOOL_A_MODULE_UNSPEC, + ETHTOOL_A_MODULE_HEADER, /* nest - _A_HEADER_* */ + ETHTOOL_A_MODULE_POWER_MODE_POLICY, /* u8 */ + ETHTOOL_A_MODULE_POWER_MODE, /* u8 */ + + /* add new constants above here */ + __ETHTOOL_A_MODULE_CNT, + ETHTOOL_A_MODULE_MAX = (__ETHTOOL_A_MODULE_CNT - 1) +}; + +/* Power Sourcing Equipment */ +enum { + ETHTOOL_A_PSE_UNSPEC, + ETHTOOL_A_PSE_HEADER, /* nest - _A_HEADER_* */ + ETHTOOL_A_PODL_PSE_ADMIN_STATE, /* u32 */ + ETHTOOL_A_PODL_PSE_ADMIN_CONTROL, /* u32 */ + ETHTOOL_A_PODL_PSE_PW_D_STATUS, /* u32 */ + + /* add new constants above here */ + __ETHTOOL_A_PSE_CNT, + ETHTOOL_A_PSE_MAX = (__ETHTOOL_A_PSE_CNT - 1) +}; + +enum { + ETHTOOL_A_RSS_UNSPEC, + ETHTOOL_A_RSS_HEADER, + ETHTOOL_A_RSS_CONTEXT, /* u32 */ + ETHTOOL_A_RSS_HFUNC, /* u32 */ + ETHTOOL_A_RSS_INDIR, /* binary */ + ETHTOOL_A_RSS_HKEY, /* binary */ + + __ETHTOOL_A_RSS_CNT, + ETHTOOL_A_RSS_MAX = (__ETHTOOL_A_RSS_CNT - 1), +}; + +/* PLCA */ + +enum { + ETHTOOL_A_PLCA_UNSPEC, + ETHTOOL_A_PLCA_HEADER, /* nest - _A_HEADER_* */ + ETHTOOL_A_PLCA_VERSION, /* u16 */ + ETHTOOL_A_PLCA_ENABLED, /* u8 */ + ETHTOOL_A_PLCA_STATUS, /* u8 */ + ETHTOOL_A_PLCA_NODE_CNT, /* u32 */ + ETHTOOL_A_PLCA_NODE_ID, /* u32 */ + ETHTOOL_A_PLCA_TO_TMR, /* u32 */ + ETHTOOL_A_PLCA_BURST_CNT, /* u32 */ + ETHTOOL_A_PLCA_BURST_TMR, /* u32 */ + + /* add new constants above here */ + __ETHTOOL_A_PLCA_CNT, + ETHTOOL_A_PLCA_MAX = (__ETHTOOL_A_PLCA_CNT - 1) +}; + +/* MAC Merge (802.3) */ + +enum { + ETHTOOL_A_MM_STAT_UNSPEC, + ETHTOOL_A_MM_STAT_PAD, + + /* aMACMergeFrameAssErrorCount */ + ETHTOOL_A_MM_STAT_REASSEMBLY_ERRORS, /* u64 */ + /* aMACMergeFrameSmdErrorCount */ + ETHTOOL_A_MM_STAT_SMD_ERRORS, /* u64 */ + /* aMACMergeFrameAssOkCount */ + ETHTOOL_A_MM_STAT_REASSEMBLY_OK, /* u64 */ + /* aMACMergeFragCountRx */ + ETHTOOL_A_MM_STAT_RX_FRAG_COUNT, /* u64 */ + /* aMACMergeFragCountTx */ + ETHTOOL_A_MM_STAT_TX_FRAG_COUNT, /* u64 */ + /* aMACMergeHoldCount */ + ETHTOOL_A_MM_STAT_HOLD_COUNT, /* u64 */ + + /* add new constants above here */ + __ETHTOOL_A_MM_STAT_CNT, + ETHTOOL_A_MM_STAT_MAX = (__ETHTOOL_A_MM_STAT_CNT - 1) +}; + +enum { + ETHTOOL_A_MM_UNSPEC, + ETHTOOL_A_MM_HEADER, /* nest - _A_HEADER_* */ + ETHTOOL_A_MM_PMAC_ENABLED, /* u8 */ + ETHTOOL_A_MM_TX_ENABLED, /* u8 */ + ETHTOOL_A_MM_TX_ACTIVE, /* u8 */ + ETHTOOL_A_MM_TX_MIN_FRAG_SIZE, /* u32 */ + ETHTOOL_A_MM_RX_MIN_FRAG_SIZE, /* u32 */ + ETHTOOL_A_MM_VERIFY_ENABLED, /* u8 */ + ETHTOOL_A_MM_VERIFY_STATUS, /* u8 */ + ETHTOOL_A_MM_VERIFY_TIME, /* u32 */ + ETHTOOL_A_MM_MAX_VERIFY_TIME, /* u32 */ + ETHTOOL_A_MM_STATS, /* nest - _A_MM_STAT_* */ + + /* add new constants above here */ + __ETHTOOL_A_MM_CNT, + ETHTOOL_A_MM_MAX = (__ETHTOOL_A_MM_CNT - 1) +}; + /* generic netlink info */ #define ETHTOOL_GENL_NAME "ethtool" #define ETHTOOL_GENL_VERSION 1 diff --git a/linux-headers/include/linux/eventfd.h b/linux-headers/include/linux/eventfd.h new file mode 100644 index 00000000000..b823f9d9a3b --- /dev/null +++ b/linux-headers/include/linux/eventfd.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _LINUX_EVENTFD_H +#define _LINUX_EVENTFD_H + +#include + +#define EFD_SEMAPHORE (1 << 0) +#define EFD_CLOEXEC O_CLOEXEC +#define EFD_NONBLOCK O_NONBLOCK + +#endif /* _LINUX_EVENTFD_H */ diff --git a/linux-headers/include/linux/eventpoll.h b/linux-headers/include/linux/eventpoll.h index 27fff481d59..50beb69246d 100644 --- a/linux-headers/include/linux/eventpoll.h +++ b/linux-headers/include/linux/eventpoll.h @@ -41,6 +41,12 @@ #define EPOLLMSG (__poll_t)0x00000400 #define EPOLLRDHUP (__poll_t)0x00002000 +/* + * Internal flag - wakeup generated by io_uring, used to detect recursion back + * into the io_uring poll handler. + */ +#define EPOLL_URING_WAKE ((__poll_t)(1U << 27)) + /* Set exclusive wakeup mode for the target file descriptor */ #define EPOLLEXCLUSIVE ((__poll_t)(1U << 28)) @@ -79,16 +85,4 @@ struct epoll_event { __u64 data; } EPOLL_PACKED; -#ifdef CONFIG_PM_SLEEP -static __inline__ void ep_take_care_of_epollwakeup(struct epoll_event *epev) -{ - if ((epev->events & EPOLLWAKEUP) && !capable(CAP_BLOCK_SUSPEND)) - epev->events &= ~EPOLLWAKEUP; -} -#else -static __inline__ void ep_take_care_of_epollwakeup(struct epoll_event *epev) -{ - epev->events &= ~EPOLLWAKEUP; -} -#endif #endif /* _LINUX_EVENTPOLL_H */ diff --git a/linux-headers/include/linux/ext4.h b/linux-headers/include/linux/ext4.h new file mode 100644 index 00000000000..80fe4aa188c --- /dev/null +++ b/linux-headers/include/linux/ext4.h @@ -0,0 +1,117 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ + +#ifndef _LINUX_EXT4_H +#define _LINUX_EXT4_H +#include +#include +#include +#include + +/* + * ext4-specific ioctl commands + */ +#define EXT4_IOC_GETVERSION _IOR('f', 3, long) +#define EXT4_IOC_SETVERSION _IOW('f', 4, long) +#define EXT4_IOC_GETVERSION_OLD FS_IOC_GETVERSION +#define EXT4_IOC_SETVERSION_OLD FS_IOC_SETVERSION +#define EXT4_IOC_GETRSVSZ _IOR('f', 5, long) +#define EXT4_IOC_SETRSVSZ _IOW('f', 6, long) +#define EXT4_IOC_GROUP_EXTEND _IOW('f', 7, unsigned long) +#define EXT4_IOC_GROUP_ADD _IOW('f', 8, struct ext4_new_group_input) +#define EXT4_IOC_MIGRATE _IO('f', 9) + /* note ioctl 10 reserved for an early version of the FIEMAP ioctl */ + /* note ioctl 11 reserved for filesystem-independent FIEMAP ioctl */ +#define EXT4_IOC_ALLOC_DA_BLKS _IO('f', 12) +#define EXT4_IOC_MOVE_EXT _IOWR('f', 15, struct move_extent) +#define EXT4_IOC_RESIZE_FS _IOW('f', 16, __u64) +#define EXT4_IOC_SWAP_BOOT _IO('f', 17) +#define EXT4_IOC_PRECACHE_EXTENTS _IO('f', 18) +/* ioctl codes 19--39 are reserved for fscrypt */ +#define EXT4_IOC_CLEAR_ES_CACHE _IO('f', 40) +#define EXT4_IOC_GETSTATE _IOW('f', 41, __u32) +#define EXT4_IOC_GET_ES_CACHE _IOWR('f', 42, struct fiemap) +#define EXT4_IOC_CHECKPOINT _IOW('f', 43, __u32) +#define EXT4_IOC_GETFSUUID _IOR('f', 44, struct fsuuid) +#define EXT4_IOC_SETFSUUID _IOW('f', 44, struct fsuuid) + +#define EXT4_IOC_SHUTDOWN _IOR('X', 125, __u32) + +/* + * ioctl commands in 32 bit emulation + */ +#define EXT4_IOC32_GETVERSION _IOR('f', 3, int) +#define EXT4_IOC32_SETVERSION _IOW('f', 4, int) +#define EXT4_IOC32_GETRSVSZ _IOR('f', 5, int) +#define EXT4_IOC32_SETRSVSZ _IOW('f', 6, int) +#define EXT4_IOC32_GROUP_EXTEND _IOW('f', 7, unsigned int) +#define EXT4_IOC32_GROUP_ADD _IOW('f', 8, struct compat_ext4_new_group_input) +#define EXT4_IOC32_GETVERSION_OLD FS_IOC32_GETVERSION +#define EXT4_IOC32_SETVERSION_OLD FS_IOC32_SETVERSION + +/* + * Flags returned by EXT4_IOC_GETSTATE + * + * We only expose to userspace a subset of the state flags in + * i_state_flags + */ +#define EXT4_STATE_FLAG_EXT_PRECACHED 0x00000001 +#define EXT4_STATE_FLAG_NEW 0x00000002 +#define EXT4_STATE_FLAG_NEWENTRY 0x00000004 +#define EXT4_STATE_FLAG_DA_ALLOC_CLOSE 0x00000008 + +/* + * Flags for ioctl EXT4_IOC_CHECKPOINT + */ +#define EXT4_IOC_CHECKPOINT_FLAG_DISCARD 0x1 +#define EXT4_IOC_CHECKPOINT_FLAG_ZEROOUT 0x2 +#define EXT4_IOC_CHECKPOINT_FLAG_DRY_RUN 0x4 +#define EXT4_IOC_CHECKPOINT_FLAG_VALID (EXT4_IOC_CHECKPOINT_FLAG_DISCARD | \ + EXT4_IOC_CHECKPOINT_FLAG_ZEROOUT | \ + EXT4_IOC_CHECKPOINT_FLAG_DRY_RUN) + +/* + * Structure for EXT4_IOC_GETFSUUID/EXT4_IOC_SETFSUUID + */ +struct fsuuid { + __u32 fsu_len; + __u32 fsu_flags; + __u8 fsu_uuid[]; +}; + +/* + * Structure for EXT4_IOC_MOVE_EXT + */ +struct move_extent { + __u32 reserved; /* should be zero */ + __u32 donor_fd; /* donor file descriptor */ + __u64 orig_start; /* logical start offset in block for orig */ + __u64 donor_start; /* logical start offset in block for donor */ + __u64 len; /* block length to be moved */ + __u64 moved_len; /* moved block length */ +}; + +/* + * Flags used by EXT4_IOC_SHUTDOWN + */ +#define EXT4_GOING_FLAGS_DEFAULT 0x0 /* going down */ +#define EXT4_GOING_FLAGS_LOGFLUSH 0x1 /* flush log but not data */ +#define EXT4_GOING_FLAGS_NOLOGFLUSH 0x2 /* don't flush log nor data */ + +/* Used to pass group descriptor data when online resize is done */ +struct ext4_new_group_input { + __u32 group; /* Group number for this data */ + __u64 block_bitmap; /* Absolute block number of block bitmap */ + __u64 inode_bitmap; /* Absolute block number of inode bitmap */ + __u64 inode_table; /* Absolute block number of inode table start */ + __u32 blocks_count; /* Total number of blocks in this group */ + __u16 reserved_blocks; /* Number of reserved blocks in this group */ + __u16 unused; +}; + +/* + * Returned by EXT4_IOC_GET_ES_CACHE as an additional possible flag. + * It indicates that the entry in extent status cache is for a hole. + */ +#define EXT4_FIEMAP_EXTENT_HOLE 0x08000000 + +#endif /* _LINUX_EXT4_H */ diff --git a/linux-headers/include/linux/f2fs.h b/linux-headers/include/linux/f2fs.h new file mode 100644 index 00000000000..984b9332bb0 --- /dev/null +++ b/linux-headers/include/linux/f2fs.h @@ -0,0 +1,99 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ + +#ifndef _LINUX_F2FS_H +#define _LINUX_F2FS_H +#include +#include + +/* + * f2fs-specific ioctl commands + */ +#define F2FS_IOCTL_MAGIC 0xf5 +#define F2FS_IOC_START_ATOMIC_WRITE _IO(F2FS_IOCTL_MAGIC, 1) +#define F2FS_IOC_COMMIT_ATOMIC_WRITE _IO(F2FS_IOCTL_MAGIC, 2) +#define F2FS_IOC_START_VOLATILE_WRITE _IO(F2FS_IOCTL_MAGIC, 3) +#define F2FS_IOC_RELEASE_VOLATILE_WRITE _IO(F2FS_IOCTL_MAGIC, 4) +#define F2FS_IOC_ABORT_ATOMIC_WRITE _IO(F2FS_IOCTL_MAGIC, 5) +#define F2FS_IOC_GARBAGE_COLLECT _IOW(F2FS_IOCTL_MAGIC, 6, __u32) +#define F2FS_IOC_WRITE_CHECKPOINT _IO(F2FS_IOCTL_MAGIC, 7) +#define F2FS_IOC_DEFRAGMENT _IOWR(F2FS_IOCTL_MAGIC, 8, \ + struct f2fs_defragment) +#define F2FS_IOC_MOVE_RANGE _IOWR(F2FS_IOCTL_MAGIC, 9, \ + struct f2fs_move_range) +#define F2FS_IOC_FLUSH_DEVICE _IOW(F2FS_IOCTL_MAGIC, 10, \ + struct f2fs_flush_device) +#define F2FS_IOC_GARBAGE_COLLECT_RANGE _IOW(F2FS_IOCTL_MAGIC, 11, \ + struct f2fs_gc_range) +#define F2FS_IOC_GET_FEATURES _IOR(F2FS_IOCTL_MAGIC, 12, __u32) +#define F2FS_IOC_SET_PIN_FILE _IOW(F2FS_IOCTL_MAGIC, 13, __u32) +#define F2FS_IOC_GET_PIN_FILE _IOR(F2FS_IOCTL_MAGIC, 14, __u32) +#define F2FS_IOC_PRECACHE_EXTENTS _IO(F2FS_IOCTL_MAGIC, 15) +#define F2FS_IOC_RESIZE_FS _IOW(F2FS_IOCTL_MAGIC, 16, __u64) +#define F2FS_IOC_GET_COMPRESS_BLOCKS _IOR(F2FS_IOCTL_MAGIC, 17, __u64) +#define F2FS_IOC_RELEASE_COMPRESS_BLOCKS \ + _IOR(F2FS_IOCTL_MAGIC, 18, __u64) +#define F2FS_IOC_RESERVE_COMPRESS_BLOCKS \ + _IOR(F2FS_IOCTL_MAGIC, 19, __u64) +#define F2FS_IOC_SEC_TRIM_FILE _IOW(F2FS_IOCTL_MAGIC, 20, \ + struct f2fs_sectrim_range) +#define F2FS_IOC_GET_COMPRESS_OPTION _IOR(F2FS_IOCTL_MAGIC, 21, \ + struct f2fs_comp_option) +#define F2FS_IOC_SET_COMPRESS_OPTION _IOW(F2FS_IOCTL_MAGIC, 22, \ + struct f2fs_comp_option) +#define F2FS_IOC_DECOMPRESS_FILE _IO(F2FS_IOCTL_MAGIC, 23) +#define F2FS_IOC_COMPRESS_FILE _IO(F2FS_IOCTL_MAGIC, 24) +#define F2FS_IOC_START_ATOMIC_REPLACE _IO(F2FS_IOCTL_MAGIC, 25) + +/* + * should be same as XFS_IOC_GOINGDOWN. + * Flags for going down operation used by FS_IOC_GOINGDOWN + */ +#define F2FS_IOC_SHUTDOWN _IOR('X', 125, __u32) /* Shutdown */ +#define F2FS_GOING_DOWN_FULLSYNC 0x0 /* going down with full sync */ +#define F2FS_GOING_DOWN_METASYNC 0x1 /* going down with metadata */ +#define F2FS_GOING_DOWN_NOSYNC 0x2 /* going down */ +#define F2FS_GOING_DOWN_METAFLUSH 0x3 /* going down with meta flush */ +#define F2FS_GOING_DOWN_NEED_FSCK 0x4 /* going down to trigger fsck */ + +/* + * Flags used by F2FS_IOC_SEC_TRIM_FILE + */ +#define F2FS_TRIM_FILE_DISCARD 0x1 /* send discard command */ +#define F2FS_TRIM_FILE_ZEROOUT 0x2 /* zero out */ +#define F2FS_TRIM_FILE_MASK 0x3 + +struct f2fs_gc_range { + __u32 sync; + __u64 start; + __u64 len; +}; + +struct f2fs_defragment { + __u64 start; + __u64 len; +}; + +struct f2fs_move_range { + __u32 dst_fd; /* destination fd */ + __u64 pos_in; /* start position in src_fd */ + __u64 pos_out; /* start position in dst_fd */ + __u64 len; /* size to move */ +}; + +struct f2fs_flush_device { + __u32 dev_num; /* device number to flush */ + __u32 segments; /* # of segments to flush */ +}; + +struct f2fs_sectrim_range { + __u64 start; + __u64 len; + __u64 flags; +}; + +struct f2fs_comp_option { + __u8 algorithm; + __u8 log_cluster_size; +}; + +#endif /* _LINUX_F2FS_H */ diff --git a/linux-headers/include/linux/fanotify.h b/linux-headers/include/linux/fanotify.h index 891b06ceb3d..b3da334e8d4 100644 --- a/linux-headers/include/linux/fanotify.h +++ b/linux-headers/include/linux/fanotify.h @@ -20,6 +20,7 @@ #define FAN_OPEN_EXEC 0x00001000 /* File was opened for exec */ #define FAN_Q_OVERFLOW 0x00004000 /* Event queued overflowed */ +#define FAN_FS_ERROR 0x00008000 /* Filesystem error */ #define FAN_OPEN_PERM 0x00010000 /* File open in perm check */ #define FAN_ACCESS_PERM 0x00020000 /* File accessed in perm check */ @@ -27,6 +28,8 @@ #define FAN_EVENT_ON_CHILD 0x08000000 /* Interested in child events */ +#define FAN_RENAME 0x10000000 /* File was renamed */ + #define FAN_ONDIR 0x40000000 /* Event occurred against dir */ /* helper events */ @@ -51,13 +54,18 @@ #define FAN_ENABLE_AUDIT 0x00000040 /* Flags to determine fanotify event format */ +#define FAN_REPORT_PIDFD 0x00000080 /* Report pidfd for event->pid */ #define FAN_REPORT_TID 0x00000100 /* event->pid is thread id */ #define FAN_REPORT_FID 0x00000200 /* Report unique file id */ #define FAN_REPORT_DIR_FID 0x00000400 /* Report unique directory id */ #define FAN_REPORT_NAME 0x00000800 /* Report events with name */ +#define FAN_REPORT_TARGET_FID 0x00001000 /* Report dirent target id */ /* Convenience macro - FAN_REPORT_NAME requires FAN_REPORT_DIR_FID */ #define FAN_REPORT_DFID_NAME (FAN_REPORT_DIR_FID | FAN_REPORT_NAME) +/* Convenience macro - FAN_REPORT_TARGET_FID requires all other FID flags */ +#define FAN_REPORT_DFID_NAME_TARGET (FAN_REPORT_DFID_NAME | \ + FAN_REPORT_FID | FAN_REPORT_TARGET_FID) /* Deprecated - do not use this in programs and do not add new flags here! */ #define FAN_ALL_INIT_FLAGS (FAN_CLOEXEC | FAN_NONBLOCK | \ @@ -74,12 +82,21 @@ #define FAN_MARK_IGNORED_SURV_MODIFY 0x00000040 #define FAN_MARK_FLUSH 0x00000080 /* FAN_MARK_FILESYSTEM is 0x00000100 */ +#define FAN_MARK_EVICTABLE 0x00000200 +/* This bit is mutually exclusive with FAN_MARK_IGNORED_MASK bit */ +#define FAN_MARK_IGNORE 0x00000400 /* These are NOT bitwise flags. Both bits can be used togther. */ #define FAN_MARK_INODE 0x00000000 #define FAN_MARK_MOUNT 0x00000010 #define FAN_MARK_FILESYSTEM 0x00000100 +/* + * Convenience macro - FAN_MARK_IGNORE requires FAN_MARK_IGNORED_SURV_MODIFY + * for non-inode mark types. + */ +#define FAN_MARK_IGNORE_SURV (FAN_MARK_IGNORE | FAN_MARK_IGNORED_SURV_MODIFY) + /* Deprecated - do not use this in programs and do not add new flags here! */ #define FAN_ALL_MARK_FLAGS (FAN_MARK_ADD |\ FAN_MARK_REMOVE |\ @@ -123,6 +140,14 @@ struct fanotify_event_metadata { #define FAN_EVENT_INFO_TYPE_FID 1 #define FAN_EVENT_INFO_TYPE_DFID_NAME 2 #define FAN_EVENT_INFO_TYPE_DFID 3 +#define FAN_EVENT_INFO_TYPE_PIDFD 4 +#define FAN_EVENT_INFO_TYPE_ERROR 5 + +/* Special info types for FAN_RENAME */ +#define FAN_EVENT_INFO_TYPE_OLD_DFID_NAME 10 +/* Reserved for FAN_EVENT_INFO_TYPE_OLD_DFID 11 */ +#define FAN_EVENT_INFO_TYPE_NEW_DFID_NAME 12 +/* Reserved for FAN_EVENT_INFO_TYPE_NEW_DFID 13 */ /* Variable length info record following event metadata */ struct fanotify_event_info_header { @@ -145,21 +170,66 @@ struct fanotify_event_info_fid { * Following is an opaque struct file_handle that can be passed as * an argument to open_by_handle_at(2). */ - unsigned char handle[0]; + unsigned char handle[]; +}; + +/* + * This structure is used for info records of type FAN_EVENT_INFO_TYPE_PIDFD. + * It holds a pidfd for the pid that was responsible for generating an event. + */ +struct fanotify_event_info_pidfd { + struct fanotify_event_info_header hdr; + __s32 pidfd; }; +struct fanotify_event_info_error { + struct fanotify_event_info_header hdr; + __s32 error; + __u32 error_count; +}; + +/* + * User space may need to record additional information about its decision. + * The extra information type records what kind of information is included. + * The default is none. We also define an extra information buffer whose + * size is determined by the extra information type. + * + * If the information type is Audit Rule, then the information following + * is the rule number that triggered the user space decision that + * requires auditing. + */ + +#define FAN_RESPONSE_INFO_NONE 0 +#define FAN_RESPONSE_INFO_AUDIT_RULE 1 + struct fanotify_response { __s32 fd; __u32 response; }; +struct fanotify_response_info_header { + __u8 type; + __u8 pad; + __u16 len; +}; + +struct fanotify_response_info_audit_rule { + struct fanotify_response_info_header hdr; + __u32 rule_number; + __u32 subj_trust; + __u32 obj_trust; +}; + /* Legit userspace responses to a _PERM event */ #define FAN_ALLOW 0x01 #define FAN_DENY 0x02 -#define FAN_AUDIT 0x10 /* Bit mask to create audit record for result */ +#define FAN_AUDIT 0x10 /* Bitmask to create audit record for result */ +#define FAN_INFO 0x20 /* Bitmask to indicate additional information */ /* No fd set in event */ #define FAN_NOFD -1 +#define FAN_NOPIDFD FAN_NOFD +#define FAN_EPIDFD -2 /* Helper functions to deal with fanotify_event_metadata buffers */ #define FAN_EVENT_METADATA_LEN (sizeof(struct fanotify_event_metadata)) diff --git a/linux-headers/include/linux/fb.h b/linux-headers/include/linux/fb.h index 859af96dd94..ec7ef0e7cf0 100644 --- a/linux-headers/include/linux/fb.h +++ b/linux-headers/include/linux/fb.h @@ -180,7 +180,7 @@ struct fb_fix_screeninfo { * * For pseudocolor: offset and length should be the same for all color * components. Offset specifies the position of the least significant bit - * of the pallette index in a pixel value. Length indicates the number + * of the palette index in a pixel value. Length indicates the number * of available palette entries (i.e. # of entries = 1 << length). */ struct fb_bitfield { diff --git a/linux-headers/include/linux/fcntl.h b/linux-headers/include/linux/fcntl.h index 598de9876b9..7ca41fd4a77 100644 --- a/linux-headers/include/linux/fcntl.h +++ b/linux-headers/include/linux/fcntl.h @@ -43,6 +43,7 @@ #define F_SEAL_GROW 0x0004 /* prevent file from growing */ #define F_SEAL_WRITE 0x0008 /* prevent writes */ #define F_SEAL_FUTURE_WRITE 0x0010 /* prevent future writes while mapped */ +#define F_SEAL_EXEC 0x0020 /* prevent chmod modifying exec bits */ /* (1U << 31) is reserved for signed error codes */ /* @@ -111,4 +112,9 @@ #define AT_RECURSIVE 0x8000 /* Apply to the entire subtree */ +/* Flags for name_to_handle_at(2). We reuse AT_ flag space to save bits... */ +#define AT_HANDLE_FID AT_REMOVEDIR /* file handle is needed to + compare object identity and may not + be usable to open_by_handle_at(2) */ + #endif /* _LINUX_FCNTL_H */ diff --git a/linux-headers/include/linux/fd.h b/linux-headers/include/linux/fd.h index b4391079570..053fb4c6cc2 100644 --- a/linux-headers/include/linux/fd.h +++ b/linux-headers/include/linux/fd.h @@ -49,11 +49,11 @@ struct floppy_struct { #define FDCLRPRM _IO(2, 0x41) /* clear user-defined parameters */ -#define FDSETPRM _IOW(2, 0x42, struct floppy_struct) +#define FDSETPRM _IOW(2, 0x42, struct floppy_struct) #define FDSETMEDIAPRM FDSETPRM /* set user-defined parameters for current media */ -#define FDDEFPRM _IOW(2, 0x43, struct floppy_struct) +#define FDDEFPRM _IOW(2, 0x43, struct floppy_struct) #define FDGETPRM _IOR(2, 0x04, struct floppy_struct) #define FDDEFMEDIAPRM FDDEFPRM #define FDGETMEDIAPRM FDGETPRM @@ -65,7 +65,7 @@ struct floppy_struct { /* issue/don't issue kernel messages on media type change */ -/* +/* * Formatting (obsolete) */ #define FD_FILL_BYTE 0xF6 /* format fill byte. */ @@ -126,13 +126,13 @@ typedef char floppy_drive_name[16]; */ struct floppy_drive_params { signed char cmos; /* CMOS type */ - - /* Spec2 is (HLD<<1 | ND), where HLD is head load time (1=2ms, 2=4 ms + + /* Spec2 is (HLD<<1 | ND), where HLD is head load time (1=2ms, 2=4 ms * etc) and ND is set means no DMA. Hardcoded to 6 (HLD=6ms, use DMA). */ unsigned long max_dtr; /* Step rate, usec */ unsigned long hlt; /* Head load/settle time, msec */ - unsigned long hut; /* Head unload time (remnant of + unsigned long hut; /* Head unload time (remnant of * 8" drives) */ unsigned long srt; /* Step rate, usec */ @@ -145,12 +145,12 @@ struct floppy_drive_params { unsigned char rps; /* rotations per second */ unsigned char tracks; /* maximum number of tracks */ unsigned long timeout; /* timeout for interrupt requests */ - - unsigned char interleave_sect; /* if there are more sectors, use + + unsigned char interleave_sect; /* if there are more sectors, use * interleave */ - + struct floppy_max_errors max_errors; - + char flags; /* various flags, including ftd_msg */ /* * Announce successful media type detection and media information loss after @@ -162,7 +162,7 @@ struct floppy_drive_params { #define FD_BROKEN_DCL 0x20 #define FD_DEBUG 0x02 #define FD_SILENT_DCL_CLEAR 0x4 -#define FD_INVERTED_DCL 0x80 /* must be 0x80, because of hardware +#define FD_INVERTED_DCL 0x80 /* must be 0x80, because of hardware considerations */ char read_track; /* use readtrack during probing? */ @@ -176,8 +176,8 @@ struct floppy_drive_params { #define FD_AUTODETECT_SIZE 8 short autodetect[FD_AUTODETECT_SIZE]; /* autodetected formats */ - - int checkfreq; /* how often should the drive be checked for disk + + int checkfreq; /* how often should the drive be checked for disk * changes */ int native_format; /* native format of this drive */ }; @@ -225,13 +225,13 @@ struct floppy_drive_struct { * decremented after each probe. */ int keep_data; - + /* Prevent "aliased" accesses. */ int fd_ref; int fd_device; - unsigned long last_checked; /* when was the drive last checked for a disk + unsigned long last_checked; /* when was the drive last checked for a disk * change? */ - + char *dmabuf; int bufblocks; }; @@ -255,7 +255,7 @@ enum reset_mode { /* * FDC state */ -struct floppy_fdc_state { +struct floppy_fdc_state { int spec1; /* spec1 value last used */ int spec2; /* spec2 value last used */ int dtr; @@ -302,16 +302,16 @@ struct floppy_write_errors { * to the user process are not counted. */ - unsigned int write_errors; /* number of physical write errors + unsigned int write_errors; /* number of physical write errors * encountered */ - + /* position of first and last write errors */ unsigned long first_error_sector; int first_error_generation; unsigned long last_error_sector; int last_error_generation; - - unsigned int badness; /* highest retry count for a read or write + + unsigned int badness; /* highest retry count for a read or write * operation */ }; @@ -335,7 +335,7 @@ struct floppy_raw_cmd { #define FD_RAW_DISK_CHANGE 4 /* out: disk change flag was set */ #define FD_RAW_INTR 8 /* wait for an interrupt */ #define FD_RAW_SPIN 0x10 /* spin up the disk for this command */ -#define FD_RAW_NO_MOTOR_AFTER 0x20 /* switch the motor off after command +#define FD_RAW_NO_MOTOR_AFTER 0x20 /* switch the motor off after command * completion */ #define FD_RAW_NEED_DISK 0x40 /* this command needs a disk to be present */ #define FD_RAW_NEED_SEEK 0x80 /* this command uses an implied seek (soft) */ @@ -353,7 +353,7 @@ struct floppy_raw_cmd { void *data; char *kernel_data; /* location of data buffer in the kernel */ - struct floppy_raw_cmd *next; /* used for chaining of raw cmd's + struct floppy_raw_cmd *next; /* used for chaining of raw cmd's * within the kernel */ long length; /* in: length of dma transfer. out: remaining bytes */ long phys_length; /* physical length, if different from dma length */ diff --git a/linux-headers/include/linux/fiemap.h b/linux-headers/include/linux/fiemap.h index 8c0bc24d5d9..7a900b2377b 100644 --- a/linux-headers/include/linux/fiemap.h +++ b/linux-headers/include/linux/fiemap.h @@ -34,7 +34,7 @@ struct fiemap { __u32 fm_mapped_extents;/* number of extents that were mapped (out) */ __u32 fm_extent_count; /* size of fm_extents array (in) */ __u32 fm_reserved; - struct fiemap_extent fm_extents[0]; /* array of mapped extents (out) */ + struct fiemap_extent fm_extents[]; /* array of mapped extents (out) */ }; #define FIEMAP_MAX_OFFSET (~0ULL) diff --git a/linux-headers/include/linux/firewire-cdev.h b/linux-headers/include/linux/firewire-cdev.h index 7e5b5c10a49..1f2c9469f92 100644 --- a/linux-headers/include/linux/firewire-cdev.h +++ b/linux-headers/include/linux/firewire-cdev.h @@ -46,6 +46,12 @@ #define FW_CDEV_EVENT_PHY_PACKET_RECEIVED 0x08 #define FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL 0x09 +/* available since kernel version 6.5 */ +#define FW_CDEV_EVENT_REQUEST3 0x0a +#define FW_CDEV_EVENT_RESPONSE2 0x0b +#define FW_CDEV_EVENT_PHY_PACKET_SENT2 0x0c +#define FW_CDEV_EVENT_PHY_PACKET_RECEIVED2 0x0d + /** * struct fw_cdev_event_common - Common part of all fw_cdev_event_* types * @closure: For arbitrary use by userspace @@ -103,6 +109,32 @@ struct fw_cdev_event_bus_reset { * @length: Data length, i.e. the response's payload size in bytes * @data: Payload data, if any * + * This event is sent instead of &fw_cdev_event_response if the kernel or the client implements + * ABI version <= 5. It has the lack of time stamp field comparing to &fw_cdev_event_response2. + */ +struct fw_cdev_event_response { + __u64 closure; + __u32 type; + __u32 rcode; + __u32 length; + __u32 data[]; +}; + +/** + * struct fw_cdev_event_response2 - Sent when a response packet was received + * @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_SEND_REQUEST + * or %FW_CDEV_IOC_SEND_BROADCAST_REQUEST + * or %FW_CDEV_IOC_SEND_STREAM_PACKET ioctl + * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_RESPONSE + * @rcode: Response code returned by the remote node + * @length: Data length, i.e. the response's payload size in bytes + * @request_tstamp: The time stamp of isochronous cycle at which the request was sent. + * @response_tstamp: The time stamp of isochronous cycle at which the response was sent. + * @padding: Padding to keep the size of structure as multiples of 8 in various architectures + * since 4 byte alignment is used for 8 byte of object type in System V ABI for i386 + * architecture. + * @data: Payload data, if any + * * This event is sent when the stack receives a response to an outgoing request * sent by %FW_CDEV_IOC_SEND_REQUEST ioctl. The payload data for responses * carrying data (read and lock responses) follows immediately and can be @@ -112,13 +144,22 @@ struct fw_cdev_event_bus_reset { * involve response packets. This includes unified write transactions, * broadcast write transactions, and transmission of asynchronous stream * packets. @rcode indicates success or failure of such transmissions. + * + * The value of @request_tstamp expresses the isochronous cycle at which the request was sent to + * initiate the transaction. The value of @response_tstamp expresses the isochronous cycle at which + * the response arrived to complete the transaction. Each value is unsigned 16 bit integer + * containing three low order bits of second field and all 13 bits of cycle field in format of + * CYCLE_TIMER register. */ -struct fw_cdev_event_response { +struct fw_cdev_event_response2 { __u64 closure; __u32 type; __u32 rcode; __u32 length; - __u32 data[0]; + __u32 request_tstamp; + __u32 response_tstamp; + __u32 padding; + __u32 data[]; }; /** @@ -142,7 +183,7 @@ struct fw_cdev_event_request { __u64 offset; __u32 handle; __u32 length; - __u32 data[0]; + __u32 data[]; }; /** @@ -159,6 +200,41 @@ struct fw_cdev_event_request { * @length: Data length, i.e. the request's payload size in bytes * @data: Incoming data, if any * + * This event is sent instead of &fw_cdev_event_request3 if the kernel or the client implements + * ABI version <= 5. It has the lack of time stamp field comparing to &fw_cdev_event_request3. + */ +struct fw_cdev_event_request2 { + __u64 closure; + __u32 type; + __u32 tcode; + __u64 offset; + __u32 source_node_id; + __u32 destination_node_id; + __u32 card; + __u32 generation; + __u32 handle; + __u32 length; + __u32 data[]; +}; + +/** + * struct fw_cdev_event_request3 - Sent on incoming request to an address region + * @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_ALLOCATE ioctl + * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_REQUEST2 + * @tcode: Transaction code of the incoming request + * @offset: The offset into the 48-bit per-node address space + * @source_node_id: Sender node ID + * @destination_node_id: Destination node ID + * @card: The index of the card from which the request came + * @generation: Bus generation in which the request is valid + * @handle: Reference to the kernel-side pending request + * @length: Data length, i.e. the request's payload size in bytes + * @tstamp: The time stamp of isochronous cycle at which the request arrived. + * @padding: Padding to keep the size of structure as multiples of 8 in various architectures + * since 4 byte alignment is used for 8 byte of object type in System V ABI for i386 + * architecture. + * @data: Incoming data, if any + * * This event is sent when the stack receives an incoming request to an address * region registered using the %FW_CDEV_IOC_ALLOCATE ioctl. The request is * guaranteed to be completely contained in the specified region. Userspace is @@ -191,10 +267,14 @@ struct fw_cdev_event_request { * sent. * * If the client subsequently needs to initiate requests to the sender node of - * an &fw_cdev_event_request2, it needs to use a device file with matching + * an &fw_cdev_event_request3, it needs to use a device file with matching * card index, node ID, and generation for outbound requests. + * + * @tstamp is isochronous cycle at which the request arrived. It is 16 bit integer value and the + * higher 3 bits expresses three low order bits of second field in the format of CYCLE_TIME + * register and the rest 13 bits expresses cycle field. */ -struct fw_cdev_event_request2 { +struct fw_cdev_event_request3 { __u64 closure; __u32 type; __u32 tcode; @@ -205,7 +285,9 @@ struct fw_cdev_event_request2 { __u32 generation; __u32 handle; __u32 length; - __u32 data[0]; + __u32 tstamp; + __u32 padding; + __u32 data[]; }; /** @@ -265,7 +347,7 @@ struct fw_cdev_event_iso_interrupt { __u32 type; __u32 cycle; __u32 header_length; - __u32 header[0]; + __u32 header[]; }; /** @@ -341,21 +423,60 @@ struct fw_cdev_event_iso_resource { * @type: %FW_CDEV_EVENT_PHY_PACKET_SENT or %..._RECEIVED * @rcode: %RCODE_..., indicates success or failure of transmission * @length: Data length in bytes + * @data: Incoming data for %FW_CDEV_IOC_RECEIVE_PHY_PACKETS. For %FW_CDEV_IOC_SEND_PHY_PACKET + * the field has the same data in the request, thus the length of 8 bytes. + * + * This event is sent instead of &fw_cdev_event_phy_packet2 if the kernel or + * the client implements ABI version <= 5. It has the lack of time stamp field comparing to + * &fw_cdev_event_phy_packet2. + */ +struct fw_cdev_event_phy_packet { + __u64 closure; + __u32 type; + __u32 rcode; + __u32 length; + __u32 data[]; +}; + +/** + * struct fw_cdev_event_phy_packet2 - A PHY packet was transmitted or received with time stamp. + * @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_SEND_PHY_PACKET + * or %FW_CDEV_IOC_RECEIVE_PHY_PACKETS ioctl + * @type: %FW_CDEV_EVENT_PHY_PACKET_SENT2 or %FW_CDEV_EVENT_PHY_PACKET_RECEIVED2 + * @rcode: %RCODE_..., indicates success or failure of transmission + * @length: Data length in bytes + * @tstamp: For %FW_CDEV_EVENT_PHY_PACKET_RECEIVED2, the time stamp of isochronous cycle at + * which the packet arrived. For %FW_CDEV_EVENT_PHY_PACKET_SENT2 and non-ping packet, + * the time stamp of isochronous cycle at which the packet was sent. For ping packet, + * the tick count for round-trip time measured by 1394 OHCI controller. + * The time stamp of isochronous cycle at which either the response was sent for + * %FW_CDEV_EVENT_PHY_PACKET_SENT2 or the request arrived for + * %FW_CDEV_EVENT_PHY_PACKET_RECEIVED2. * @data: Incoming data * - * If @type is %FW_CDEV_EVENT_PHY_PACKET_SENT, @length is 0 and @data empty, - * except in case of a ping packet: Then, @length is 4, and @data[0] is the - * ping time in 49.152MHz clocks if @rcode is %RCODE_COMPLETE. + * If @type is %FW_CDEV_EVENT_PHY_PACKET_SENT2, @length is 8 and @data consists of the two PHY + * packet quadlets to be sent, in host byte order, * - * If @type is %FW_CDEV_EVENT_PHY_PACKET_RECEIVED, @length is 8 and @data - * consists of the two PHY packet quadlets, in host byte order. + * If @type is %FW_CDEV_EVENT_PHY_PACKET_RECEIVED2, @length is 8 and @data consists of the two PHY + * packet quadlets, in host byte order. + * + * For %FW_CDEV_EVENT_PHY_PACKET_RECEIVED2, the @tstamp is the isochronous cycle at which the + * packet arrived. It is 16 bit integer value and the higher 3 bits expresses three low order bits + * of second field and the rest 13 bits expresses cycle field in the format of CYCLE_TIME register. + * + * For %FW_CDEV_EVENT_PHY_PACKET_SENT2, the @tstamp has different meanings whether to sent the + * packet for ping or not. If it's not for ping, the @tstamp is the isochronous cycle at which the + * packet was sent, and use the same format as the case of %FW_CDEV_EVENT_PHY_PACKET_SENT2. If it's + * for ping, the @tstamp is for round-trip time measured by 1394 OHCI controller with 42.195 MHz + * resolution. */ -struct fw_cdev_event_phy_packet { +struct fw_cdev_event_phy_packet2 { __u64 closure; __u32 type; __u32 rcode; __u32 length; - __u32 data[0]; + __u32 tstamp; + __u32 data[]; }; /** @@ -375,6 +496,11 @@ struct fw_cdev_event_phy_packet { * %FW_CDEV_EVENT_PHY_PACKET_SENT or * %FW_CDEV_EVENT_PHY_PACKET_RECEIVED * + * @request3: Valid if @common.type == %FW_CDEV_EVENT_REQUEST3 + * @response2: Valid if @common.type == %FW_CDEV_EVENT_RESPONSE2 + * @phy_packet2: Valid if @common.type == %FW_CDEV_EVENT_PHY_PACKET_SENT2 or + * %FW_CDEV_EVENT_PHY_PACKET_RECEIVED2 + * * Convenience union for userspace use. Events could be read(2) into an * appropriately aligned char buffer and then cast to this union for further * processing. Note that for a request, response or iso_interrupt event, @@ -393,6 +519,9 @@ union fw_cdev_event { struct fw_cdev_event_iso_interrupt_mc iso_interrupt_mc; /* added in 2.6.36 */ struct fw_cdev_event_iso_resource iso_resource; /* added in 2.6.30 */ struct fw_cdev_event_phy_packet phy_packet; /* added in 2.6.36 */ + struct fw_cdev_event_request3 request3; /* added in 6.5 */ + struct fw_cdev_event_response2 response2; /* added in 6.5 */ + struct fw_cdev_event_phy_packet2 phy_packet2; /* added in 6.5 */ }; /* available since kernel version 2.6.22 */ @@ -457,6 +586,11 @@ union fw_cdev_event { * 5 (3.4) - send %FW_CDEV_EVENT_ISO_INTERRUPT events when needed to * avoid dropping data * - added %FW_CDEV_IOC_FLUSH_ISO + * 6 (6.5) - added some event for subactions of asynchronous transaction with time stamp + * - %FW_CDEV_EVENT_REQUEST3 + * - %FW_CDEV_EVENT_RESPONSE2 + * - %FW_CDEV_EVENT_PHY_PACKET_SENT2 + * - %FW_CDEV_EVENT_PHY_PACKET_RECEIVED2 */ /** @@ -502,11 +636,11 @@ struct fw_cdev_get_info { * @data: Userspace pointer to payload * @generation: The bus generation where packet is valid * - * Send a request to the device. This ioctl implements all outgoing requests. - * Both quadlet and block request specify the payload as a pointer to the data - * in the @data field. Once the transaction completes, the kernel writes an - * &fw_cdev_event_response event back. The @closure field is passed back to - * user space in the response event. + * Send a request to the device. This ioctl implements all outgoing requests. Both quadlet and + * block request specify the payload as a pointer to the data in the @data field. Once the + * transaction completes, the kernel writes either &fw_cdev_event_response event or + * &fw_cdev_event_response event back. The @closure field is passed back to user space in the + * response event. */ struct fw_cdev_send_request { __u32 tcode; @@ -803,7 +937,7 @@ struct fw_cdev_set_iso_channels { */ struct fw_cdev_iso_packet { __u32 control; - __u32 header[0]; + __u32 header[]; }; /** @@ -844,7 +978,7 @@ struct fw_cdev_queue_iso { * struct fw_cdev_start_iso - Start an isochronous transmission or reception * @cycle: Cycle in which to start I/O. If @cycle is greater than or * equal to 0, the I/O will start on that cycle. - * @sync: Determines the value to wait for for receive packets that have + * @sync: Determines the value to wait for receive packets that have * the %FW_CDEV_ISO_SYNC bit set * @tags: Tag filter bit mask. Only valid for isochronous reception. * Determines the tag values for which packets will be accepted. @@ -989,10 +1123,9 @@ struct fw_cdev_allocate_iso_resource { * @generation: The bus generation where packet is valid * @speed: Speed to transmit at * - * The %FW_CDEV_IOC_SEND_STREAM_PACKET ioctl sends an asynchronous stream packet - * to every device which is listening to the specified channel. The kernel - * writes an &fw_cdev_event_response event which indicates success or failure of - * the transmission. + * The %FW_CDEV_IOC_SEND_STREAM_PACKET ioctl sends an asynchronous stream packet to every device + * which is listening to the specified channel. The kernel writes either &fw_cdev_event_response + * event or &fw_cdev_event_response2 event which indicates success or failure of the transmission. */ struct fw_cdev_send_stream_packet { __u32 length; @@ -1011,8 +1144,8 @@ struct fw_cdev_send_stream_packet { * @data: First and second quadlet of the PHY packet * @generation: The bus generation where packet is valid * - * The %FW_CDEV_IOC_SEND_PHY_PACKET ioctl sends a PHY packet to all nodes - * on the same card as this device. After transmission, an + * The %FW_CDEV_IOC_SEND_PHY_PACKET ioctl sends a PHY packet to all nodes on the same card as this + * device. After transmission, either %FW_CDEV_EVENT_PHY_PACKET_SENT event or * %FW_CDEV_EVENT_PHY_PACKET_SENT event is generated. * * The payload @data\[\] shall be specified in host byte order. Usually, @@ -1031,8 +1164,9 @@ struct fw_cdev_send_phy_packet { * struct fw_cdev_receive_phy_packets - start reception of PHY packets * @closure: Passed back to userspace in phy packet events * - * This ioctl activates issuing of %FW_CDEV_EVENT_PHY_PACKET_RECEIVED due to - * incoming PHY packets from any node on the same bus as the device. + * This ioctl activates issuing of either %FW_CDEV_EVENT_PHY_PACKET_RECEIVED or + * %FW_CDEV_EVENT_PHY_PACKET_RECEIVED2 due to incoming PHY packets from any node on the same bus + * as the device. * * The ioctl is only permitted on device files which represent a local node. */ diff --git a/linux-headers/include/linux/fou.h b/linux-headers/include/linux/fou.h index 9f915118feb..1c2b680bb47 100644 --- a/linux-headers/include/linux/fou.h +++ b/linux-headers/include/linux/fou.h @@ -1,32 +1,37 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* fou.h - FOU Interface */ +/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */ +/* Do not edit directly, auto-generated from: */ +/* Documentation/netlink/specs/fou.yaml */ +/* YNL-GEN uapi header */ #ifndef _LINUX_FOU_H #define _LINUX_FOU_H -/* NETLINK_GENERIC related info - */ #define FOU_GENL_NAME "fou" -#define FOU_GENL_VERSION 0x1 +#define FOU_GENL_VERSION 1 enum { - FOU_ATTR_UNSPEC, - FOU_ATTR_PORT, /* u16 */ - FOU_ATTR_AF, /* u8 */ - FOU_ATTR_IPPROTO, /* u8 */ - FOU_ATTR_TYPE, /* u8 */ - FOU_ATTR_REMCSUM_NOPARTIAL, /* flag */ - FOU_ATTR_LOCAL_V4, /* u32 */ - FOU_ATTR_LOCAL_V6, /* in6_addr */ - FOU_ATTR_PEER_V4, /* u32 */ - FOU_ATTR_PEER_V6, /* in6_addr */ - FOU_ATTR_PEER_PORT, /* u16 */ - FOU_ATTR_IFINDEX, /* s32 */ - - __FOU_ATTR_MAX, + FOU_ENCAP_UNSPEC, + FOU_ENCAP_DIRECT, + FOU_ENCAP_GUE, }; -#define FOU_ATTR_MAX (__FOU_ATTR_MAX - 1) +enum { + FOU_ATTR_UNSPEC, + FOU_ATTR_PORT, + FOU_ATTR_AF, + FOU_ATTR_IPPROTO, + FOU_ATTR_TYPE, + FOU_ATTR_REMCSUM_NOPARTIAL, + FOU_ATTR_LOCAL_V4, + FOU_ATTR_LOCAL_V6, + FOU_ATTR_PEER_V4, + FOU_ATTR_PEER_V6, + FOU_ATTR_PEER_PORT, + FOU_ATTR_IFINDEX, + + __FOU_ATTR_MAX +}; +#define FOU_ATTR_MAX (__FOU_ATTR_MAX - 1) enum { FOU_CMD_UNSPEC, @@ -34,15 +39,8 @@ enum { FOU_CMD_DEL, FOU_CMD_GET, - __FOU_CMD_MAX, + __FOU_CMD_MAX }; - -enum { - FOU_ENCAP_UNSPEC, - FOU_ENCAP_DIRECT, - FOU_ENCAP_GUE, -}; - -#define FOU_CMD_MAX (__FOU_CMD_MAX - 1) +#define FOU_CMD_MAX (__FOU_CMD_MAX - 1) #endif /* _LINUX_FOU_H */ diff --git a/linux-headers/include/linux/fs.h b/linux-headers/include/linux/fs.h index b9977b8201c..aee6e884f77 100644 --- a/linux-headers/include/linux/fs.h +++ b/linux-headers/include/linux/fs.h @@ -86,7 +86,7 @@ struct file_dedupe_range { __u16 dest_count; /* in - total elements in info array */ __u16 reserved1; /* must be zero */ __u32 reserved2; /* must be zero */ - struct file_dedupe_range_info info[0]; + struct file_dedupe_range_info info[]; }; /* And dynamically-tunable limits and defaults: */ @@ -180,8 +180,9 @@ struct fsxattr { #define BLKSECDISCARD _IO(0x12,125) #define BLKROTATIONAL _IO(0x12,126) #define BLKZEROOUT _IO(0x12,127) +#define BLKGETDISKSEQ _IOR(0x12,128,__u64) /* - * A jump here: 130-131 are reserved for zoned block devices + * A jump here: 130-136 are reserved for zoned block devices * (see uapi/linux/blkzoned.h) */ diff --git a/linux-headers/include/linux/fscrypt.h b/linux-headers/include/linux/fscrypt.h index 15c3eac17cb..014c965240d 100644 --- a/linux-headers/include/linux/fscrypt.h +++ b/linux-headers/include/linux/fscrypt.h @@ -26,8 +26,11 @@ #define FSCRYPT_MODE_AES_256_CTS 4 #define FSCRYPT_MODE_AES_128_CBC 5 #define FSCRYPT_MODE_AES_128_CTS 6 +#define FSCRYPT_MODE_SM4_XTS 7 +#define FSCRYPT_MODE_SM4_CTS 8 #define FSCRYPT_MODE_ADIANTUM 9 -/* If adding a mode number > 9, update FSCRYPT_MODE_MAX in fscrypt_private.h */ +#define FSCRYPT_MODE_AES_256_HCTR2 10 +/* If adding a mode number > 10, update FSCRYPT_MODE_MAX in fscrypt_private.h */ /* * Legacy policy version; ad-hoc KDF and no key verification. @@ -183,8 +186,6 @@ struct fscrypt_get_key_status_arg { #define FS_ENCRYPTION_MODE_AES_256_CTS FSCRYPT_MODE_AES_256_CTS #define FS_ENCRYPTION_MODE_AES_128_CBC FSCRYPT_MODE_AES_128_CBC #define FS_ENCRYPTION_MODE_AES_128_CTS FSCRYPT_MODE_AES_128_CTS -#define FS_ENCRYPTION_MODE_SPECK128_256_XTS 7 /* removed */ -#define FS_ENCRYPTION_MODE_SPECK128_256_CTS 8 /* removed */ #define FS_ENCRYPTION_MODE_ADIANTUM FSCRYPT_MODE_ADIANTUM #define FS_KEY_DESC_PREFIX FSCRYPT_KEY_DESC_PREFIX #define FS_KEY_DESC_PREFIX_SIZE FSCRYPT_KEY_DESC_PREFIX_SIZE diff --git a/linux-headers/include/linux/fsi.h b/linux-headers/include/linux/fsi.h index 095b1a46f55..6e7184c2352 100644 --- a/linux-headers/include/linux/fsi.h +++ b/linux-headers/include/linux/fsi.h @@ -55,4 +55,28 @@ struct scom_access { #define FSI_SCOM_WRITE _IOWR('s', 0x02, struct scom_access) #define FSI_SCOM_RESET _IOW('s', 0x03, __u32) +/* + * /dev/sbefifo* ioctl interface + */ + +/** + * FSI_SBEFIFO_CMD_TIMEOUT sets the timeout for writing data to the SBEFIFO. + * + * The command timeout is specified in seconds. The minimum value of command + * timeout is 1 seconds (default) and the maximum value of command timeout is + * 120 seconds. A command timeout of 0 will reset the value to the default of + * 1 seconds. + */ +#define FSI_SBEFIFO_CMD_TIMEOUT_SECONDS _IOW('s', 0x01, __u32) + +/** + * FSI_SBEFIFO_READ_TIMEOUT sets the read timeout for response from SBE. + * + * The read timeout is specified in seconds. The minimum value of read + * timeout is 10 seconds (default) and the maximum value of read timeout is + * 120 seconds. A read timeout of 0 will reset the value to the default of + * (10 seconds). + */ +#define FSI_SBEFIFO_READ_TIMEOUT_SECONDS _IOW('s', 0x00, __u32) + #endif /* _LINUX_FSI_H */ diff --git a/linux-headers/include/linux/fsl_mc.h b/linux-headers/include/linux/fsl_mc.h new file mode 100644 index 00000000000..347bc22efb8 --- /dev/null +++ b/linux-headers/include/linux/fsl_mc.h @@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Management Complex (MC) userspace public interface + * + * Copyright 2021 NXP + * + */ +#ifndef _FSL_MC_H_ +#define _FSL_MC_H_ + +#include + +#define MC_CMD_NUM_OF_PARAMS 7 + +/** + * struct fsl_mc_command - Management Complex (MC) command structure + * @header: MC command header + * @params: MC command parameters + * + * Used by FSL_MC_SEND_MC_COMMAND + */ +struct fsl_mc_command { + __le64 header; + __le64 params[MC_CMD_NUM_OF_PARAMS]; +}; + +#define FSL_MC_SEND_CMD_IOCTL_TYPE 'R' +#define FSL_MC_SEND_CMD_IOCTL_SEQ 0xE0 + +#define FSL_MC_SEND_MC_COMMAND \ + _IOWR(FSL_MC_SEND_CMD_IOCTL_TYPE, FSL_MC_SEND_CMD_IOCTL_SEQ, \ + struct fsl_mc_command) + +#endif /* _FSL_MC_H_ */ diff --git a/linux-headers/include/linux/fsmap.h b/linux-headers/include/linux/fsmap.h index 8df1441024e..58a61b5c88f 100644 --- a/linux-headers/include/linux/fsmap.h +++ b/linux-headers/include/linux/fsmap.h @@ -69,7 +69,7 @@ struct fsmap_head { }; /* Size of an fsmap_head with room for nr records. */ -static __inline__ size_t +static __inline__ __kernel_size_t fsmap_sizeof( unsigned int nr) { diff --git a/linux-headers/include/linux/fsverity.h b/linux-headers/include/linux/fsverity.h index 12b16f579a3..bdc2ca66396 100644 --- a/linux-headers/include/linux/fsverity.h +++ b/linux-headers/include/linux/fsverity.h @@ -34,7 +34,63 @@ struct fsverity_digest { __u8 digest[]; }; +/* + * Struct containing a file's Merkle tree properties. The fs-verity file digest + * is the hash of this struct. A userspace program needs this struct only if it + * needs to compute fs-verity file digests itself, e.g. in order to sign files. + * It isn't needed just to enable fs-verity on a file. + * + * Note: when computing the file digest, 'sig_size' and 'signature' must be left + * zero and empty, respectively. These fields are present only because some + * filesystems reuse this struct as part of their on-disk format. + */ +struct fsverity_descriptor { + __u8 version; /* must be 1 */ + __u8 hash_algorithm; /* Merkle tree hash algorithm */ + __u8 log_blocksize; /* log2 of size of data and tree blocks */ + __u8 salt_size; /* size of salt in bytes; 0 if none */ + __le32 __reserved_0x04; /* must be 0 */ + __le64 data_size; /* size of file the Merkle tree is built over */ + __u8 root_hash[64]; /* Merkle tree root hash */ + __u8 salt[32]; /* salt prepended to each hashed block */ + __u8 __reserved[144]; /* must be 0's */ +}; + +/* + * Format in which fs-verity file digests are signed in built-in signatures. + * This is the same as 'struct fsverity_digest', except here some magic bytes + * are prepended to provide some context about what is being signed in case the + * same key is used for non-fsverity purposes, and here the fields have fixed + * endianness. + * + * This struct is specific to the built-in signature verification support, which + * is optional. fs-verity users may also verify signatures in userspace, in + * which case userspace is responsible for deciding on what bytes are signed. + * This struct may still be used, but it doesn't have to be. For example, + * userspace could instead use a string like "sha256:$digest_as_hex_string". + */ +struct fsverity_formatted_digest { + char magic[8]; /* must be "FSVerity" */ + __le16 digest_algorithm; + __le16 digest_size; + __u8 digest[]; +}; + +#define FS_VERITY_METADATA_TYPE_MERKLE_TREE 1 +#define FS_VERITY_METADATA_TYPE_DESCRIPTOR 2 +#define FS_VERITY_METADATA_TYPE_SIGNATURE 3 + +struct fsverity_read_metadata_arg { + __u64 metadata_type; + __u64 offset; + __u64 length; + __u64 buf_ptr; + __u64 __reserved; +}; + #define FS_IOC_ENABLE_VERITY _IOW('f', 133, struct fsverity_enable_arg) #define FS_IOC_MEASURE_VERITY _IOWR('f', 134, struct fsverity_digest) +#define FS_IOC_READ_VERITY_METADATA \ + _IOWR('f', 135, struct fsverity_read_metadata_arg) #endif /* _LINUX_FSVERITY_H */ diff --git a/linux-headers/include/linux/fuse.h b/linux-headers/include/linux/fuse.h index 82c0a38b591..6b9793842c9 100644 --- a/linux-headers/include/linux/fuse.h +++ b/linux-headers/include/linux/fuse.h @@ -175,6 +175,42 @@ * * 7.32 * - add flags to fuse_attr, add FUSE_ATTR_SUBMOUNT, add FUSE_SUBMOUNTS + * + * 7.33 + * - add FUSE_HANDLE_KILLPRIV_V2, FUSE_WRITE_KILL_SUIDGID, FATTR_KILL_SUIDGID + * - add FUSE_OPEN_KILL_SUIDGID + * - extend fuse_setxattr_in, add FUSE_SETXATTR_EXT + * - add FUSE_SETXATTR_ACL_KILL_SGID + * + * 7.34 + * - add FUSE_SYNCFS + * + * 7.35 + * - add FOPEN_NOFLUSH + * + * 7.36 + * - extend fuse_init_in with reserved fields, add FUSE_INIT_EXT init flag + * - add flags2 to fuse_init_in and fuse_init_out + * - add FUSE_SECURITY_CTX init flag + * - add security context to create, mkdir, symlink, and mknod requests + * - add FUSE_HAS_INODE_DAX, FUSE_ATTR_DAX + * + * 7.37 + * - add FUSE_TMPFILE + * + * 7.38 + * - add FUSE_EXPIRE_ONLY flag to fuse_notify_inval_entry + * - add FOPEN_PARALLEL_DIRECT_WRITES + * - add total_extlen to fuse_in_header + * - add FUSE_MAX_NR_SECCTX + * - add extension header + * - add FUSE_EXT_GROUPS + * - add FUSE_CREATE_SUPP_GROUP + * - add FUSE_HAS_EXPIRE_ONLY + * + * 7.39 + * - add FUSE_DIRECT_IO_RELAX + * - add FUSE_STATX and related structures */ #ifndef _LINUX_FUSE_H @@ -206,7 +242,7 @@ #define FUSE_KERNEL_VERSION 7 /** Minor version number of this interface */ -#define FUSE_KERNEL_MINOR_VERSION 32 +#define FUSE_KERNEL_MINOR_VERSION 39 /** The node ID of the root inode */ #define FUSE_ROOT_ID 1 @@ -233,6 +269,40 @@ struct fuse_attr { uint32_t flags; }; +/* + * The following structures are bit-for-bit compatible with the statx(2) ABI in + * Linux. + */ +struct fuse_sx_time { + int64_t tv_sec; + uint32_t tv_nsec; + int32_t __reserved; +}; + +struct fuse_statx { + uint32_t mask; + uint32_t blksize; + uint64_t attributes; + uint32_t nlink; + uint32_t uid; + uint32_t gid; + uint16_t mode; + uint16_t __spare0[1]; + uint64_t ino; + uint64_t size; + uint64_t blocks; + uint64_t attributes_mask; + struct fuse_sx_time atime; + struct fuse_sx_time btime; + struct fuse_sx_time ctime; + struct fuse_sx_time mtime; + uint32_t rdev_major; + uint32_t rdev_minor; + uint32_t dev_major; + uint32_t dev_minor; + uint64_t __spare2[14]; +}; + struct fuse_kstatfs { uint64_t blocks; uint64_t bfree; @@ -267,6 +337,7 @@ struct fuse_file_lock { #define FATTR_MTIME_NOW (1 << 8) #define FATTR_LOCKOWNER (1 << 9) #define FATTR_CTIME (1 << 10) +#define FATTR_KILL_SUIDGID (1 << 11) /** * Flags returned by the OPEN request @@ -276,12 +347,16 @@ struct fuse_file_lock { * FOPEN_NONSEEKABLE: the file is not seekable * FOPEN_CACHE_DIR: allow caching this directory * FOPEN_STREAM: the file is stream-like (no file position at all) + * FOPEN_NOFLUSH: don't flush data cache on close (unless FUSE_WRITEBACK_CACHE) + * FOPEN_PARALLEL_DIRECT_WRITES: Allow concurrent direct writes on the same inode */ #define FOPEN_DIRECT_IO (1 << 0) #define FOPEN_KEEP_CACHE (1 << 1) #define FOPEN_NONSEEKABLE (1 << 2) #define FOPEN_CACHE_DIR (1 << 3) #define FOPEN_STREAM (1 << 4) +#define FOPEN_NOFLUSH (1 << 5) +#define FOPEN_PARALLEL_DIRECT_WRITES (1 << 6) /** * INIT request/reply flags @@ -316,6 +391,22 @@ struct fuse_file_lock { * foffset and moffset fields in struct * fuse_setupmapping_out and fuse_removemapping_one. * FUSE_SUBMOUNTS: kernel supports auto-mounting directory submounts + * FUSE_HANDLE_KILLPRIV_V2: fs kills suid/sgid/cap on write/chown/trunc. + * Upon write/truncate suid/sgid is only killed if caller + * does not have CAP_FSETID. Additionally upon + * write/truncate sgid is killed only if file has group + * execute permission. (Same as Linux VFS behavior). + * FUSE_SETXATTR_EXT: Server supports extended struct fuse_setxattr_in + * FUSE_INIT_EXT: extended fuse_init_in request + * FUSE_INIT_RESERVED: reserved, do not use + * FUSE_SECURITY_CTX: add security context to create, mkdir, symlink, and + * mknod + * FUSE_HAS_INODE_DAX: use per inode DAX + * FUSE_CREATE_SUPP_GROUP: add supplementary group info to create, mkdir, + * symlink and mknod (single group that matches parent) + * FUSE_HAS_EXPIRE_ONLY: kernel supports expiry-only entry invalidation + * FUSE_DIRECT_IO_RELAX: relax restrictions in FOPEN_DIRECT_IO mode, for now + * allow shared mmap */ #define FUSE_ASYNC_READ (1 << 0) #define FUSE_POSIX_LOCKS (1 << 1) @@ -345,6 +436,16 @@ struct fuse_file_lock { #define FUSE_EXPLICIT_INVAL_DATA (1 << 25) #define FUSE_MAP_ALIGNMENT (1 << 26) #define FUSE_SUBMOUNTS (1 << 27) +#define FUSE_HANDLE_KILLPRIV_V2 (1 << 28) +#define FUSE_SETXATTR_EXT (1 << 29) +#define FUSE_INIT_EXT (1 << 30) +#define FUSE_INIT_RESERVED (1 << 31) +/* bits 32..63 get shifted down 32 bits into the flags2 field */ +#define FUSE_SECURITY_CTX (1ULL << 32) +#define FUSE_HAS_INODE_DAX (1ULL << 33) +#define FUSE_CREATE_SUPP_GROUP (1ULL << 34) +#define FUSE_HAS_EXPIRE_ONLY (1ULL << 35) +#define FUSE_DIRECT_IO_RELAX (1ULL << 36) /** * CUSE INIT request/reply flags @@ -374,11 +475,14 @@ struct fuse_file_lock { * * FUSE_WRITE_CACHE: delayed write from page cache, file handle is guessed * FUSE_WRITE_LOCKOWNER: lock_owner field is valid - * FUSE_WRITE_KILL_PRIV: kill suid and sgid bits + * FUSE_WRITE_KILL_SUIDGID: kill suid and sgid bits */ #define FUSE_WRITE_CACHE (1 << 0) #define FUSE_WRITE_LOCKOWNER (1 << 1) -#define FUSE_WRITE_KILL_PRIV (1 << 2) +#define FUSE_WRITE_KILL_SUIDGID (1 << 2) + +/* Obsolete alias; this flag implies killing suid/sgid only. */ +#define FUSE_WRITE_KILL_PRIV FUSE_WRITE_KILL_SUIDGID /** * Read flags @@ -424,8 +528,39 @@ struct fuse_file_lock { * fuse_attr flags * * FUSE_ATTR_SUBMOUNT: Object is a submount root + * FUSE_ATTR_DAX: Enable DAX for this file in per inode DAX mode */ #define FUSE_ATTR_SUBMOUNT (1 << 0) +#define FUSE_ATTR_DAX (1 << 1) + +/** + * Open flags + * FUSE_OPEN_KILL_SUIDGID: Kill suid and sgid if executable + */ +#define FUSE_OPEN_KILL_SUIDGID (1 << 0) + +/** + * setxattr flags + * FUSE_SETXATTR_ACL_KILL_SGID: Clear SGID when system.posix_acl_access is set + */ +#define FUSE_SETXATTR_ACL_KILL_SGID (1 << 0) + +/** + * notify_inval_entry flags + * FUSE_EXPIRE_ONLY + */ +#define FUSE_EXPIRE_ONLY (1 << 0) + +/** + * extension type + * FUSE_MAX_NR_SECCTX: maximum value of &fuse_secctx_header.nr_secctx + * FUSE_EXT_GROUPS: &fuse_supp_groups extension + */ +enum fuse_ext_type { + /* Types 0..31 are reserved for fuse_secctx_header */ + FUSE_MAX_NR_SECCTX = 31, + FUSE_EXT_GROUPS = 32, +}; enum fuse_opcode { FUSE_LOOKUP = 1, @@ -475,6 +610,9 @@ enum fuse_opcode { FUSE_COPY_FILE_RANGE = 47, FUSE_SETUPMAPPING = 48, FUSE_REMOVEMAPPING = 49, + FUSE_SYNCFS = 50, + FUSE_TMPFILE = 51, + FUSE_STATX = 52, /* CUSE specific operations */ CUSE_INIT = 4096, @@ -539,6 +677,22 @@ struct fuse_attr_out { struct fuse_attr attr; }; +struct fuse_statx_in { + uint32_t getattr_flags; + uint32_t reserved; + uint64_t fh; + uint32_t sx_flags; + uint32_t sx_mask; +}; + +struct fuse_statx_out { + uint64_t attr_valid; /* Cache timeout for the attributes */ + uint32_t attr_valid_nsec; + uint32_t flags; + uint64_t spare[2]; + struct fuse_statx stat; +}; + #define FUSE_COMPAT_MKNOD_IN_SIZE 8 struct fuse_mknod_in { @@ -588,14 +742,14 @@ struct fuse_setattr_in { struct fuse_open_in { uint32_t flags; - uint32_t unused; + uint32_t open_flags; /* FUSE_OPEN_... */ }; struct fuse_create_in { uint32_t flags; uint32_t mode; uint32_t umask; - uint32_t padding; + uint32_t open_flags; /* FUSE_OPEN_... */ }; struct fuse_open_out { @@ -657,9 +811,13 @@ struct fuse_fsync_in { uint32_t padding; }; +#define FUSE_COMPAT_SETXATTR_IN_SIZE 8 + struct fuse_setxattr_in { uint32_t size; uint32_t flags; + uint32_t setxattr_flags; + uint32_t padding; }; struct fuse_getxattr_in { @@ -694,6 +852,8 @@ struct fuse_init_in { uint32_t minor; uint32_t max_readahead; uint32_t flags; + uint32_t flags2; + uint32_t unused[11]; }; #define FUSE_COMPAT_INIT_OUT_SIZE 8 @@ -710,7 +870,8 @@ struct fuse_init_out { uint32_t time_gran; uint16_t max_pages; uint16_t map_alignment; - uint32_t unused[8]; + uint32_t flags2; + uint32_t unused[7]; }; #define CUSE_INIT_INFO_MAX 4096 @@ -801,7 +962,8 @@ struct fuse_in_header { uint32_t uid; uint32_t gid; uint32_t pid; - uint32_t padding; + uint16_t total_extlen; /* length of extensions in 8byte units */ + uint16_t padding; }; struct fuse_out_header { @@ -818,9 +980,12 @@ struct fuse_dirent { char name[]; }; -#define FUSE_NAME_OFFSET offsetof(struct fuse_dirent, name) -#define FUSE_DIRENT_ALIGN(x) \ +/* Align variable length records to 64bit boundary */ +#define FUSE_REC_ALIGN(x) \ (((x) + sizeof(uint64_t) - 1) & ~(sizeof(uint64_t) - 1)) + +#define FUSE_NAME_OFFSET offsetof(struct fuse_dirent, name) +#define FUSE_DIRENT_ALIGN(x) FUSE_REC_ALIGN(x) #define FUSE_DIRENT_SIZE(d) \ FUSE_DIRENT_ALIGN(FUSE_NAME_OFFSET + (d)->namelen) @@ -843,7 +1008,7 @@ struct fuse_notify_inval_inode_out { struct fuse_notify_inval_entry_out { uint64_t parent; uint32_t namelen; - uint32_t padding; + uint32_t flags; }; struct fuse_notify_delete_out { @@ -879,7 +1044,8 @@ struct fuse_notify_retrieve_in { }; /* Device ioctls: */ -#define FUSE_DEV_IOC_CLONE _IOR(229, 0, uint32_t) +#define FUSE_DEV_IOC_MAGIC 229 +#define FUSE_DEV_IOC_CLONE _IOR(FUSE_DEV_IOC_MAGIC, 0, uint32_t) struct fuse_lseek_in { uint64_t fh; @@ -932,4 +1098,53 @@ struct fuse_removemapping_one { #define FUSE_REMOVEMAPPING_MAX_ENTRY \ (PAGE_SIZE / sizeof(struct fuse_removemapping_one)) +struct fuse_syncfs_in { + uint64_t padding; +}; + +/* + * For each security context, send fuse_secctx with size of security context + * fuse_secctx will be followed by security context name and this in turn + * will be followed by actual context label. + * fuse_secctx, name, context + */ +struct fuse_secctx { + uint32_t size; + uint32_t padding; +}; + +/* + * Contains the information about how many fuse_secctx structures are being + * sent and what's the total size of all security contexts (including + * size of fuse_secctx_header). + * + */ +struct fuse_secctx_header { + uint32_t size; + uint32_t nr_secctx; +}; + +/** + * struct fuse_ext_header - extension header + * @size: total size of this extension including this header + * @type: type of extension + * + * This is made compatible with fuse_secctx_header by using type values > + * FUSE_MAX_NR_SECCTX + */ +struct fuse_ext_header { + uint32_t size; + uint32_t type; +}; + +/** + * struct fuse_supp_groups - Supplementary group extension + * @nr_groups: number of supplementary groups + * @groups: flexible array of group IDs + */ +struct fuse_supp_groups { + uint32_t nr_groups; + uint32_t groups[]; +}; + #endif /* _LINUX_FUSE_H */ diff --git a/linux-headers/include/linux/futex.h b/linux-headers/include/linux/futex.h index c5df51e9f84..5f362e48104 100644 --- a/linux-headers/include/linux/futex.h +++ b/linux-headers/include/linux/futex.h @@ -21,6 +21,7 @@ #define FUTEX_WAKE_BITSET 10 #define FUTEX_WAIT_REQUEUE_PI 11 #define FUTEX_CMP_REQUEUE_PI 12 +#define FUTEX_LOCK_PI2 13 #define FUTEX_PRIVATE_FLAG 128 #define FUTEX_CLOCK_REALTIME 256 @@ -32,6 +33,7 @@ #define FUTEX_CMP_REQUEUE_PRIVATE (FUTEX_CMP_REQUEUE | FUTEX_PRIVATE_FLAG) #define FUTEX_WAKE_OP_PRIVATE (FUTEX_WAKE_OP | FUTEX_PRIVATE_FLAG) #define FUTEX_LOCK_PI_PRIVATE (FUTEX_LOCK_PI | FUTEX_PRIVATE_FLAG) +#define FUTEX_LOCK_PI2_PRIVATE (FUTEX_LOCK_PI2 | FUTEX_PRIVATE_FLAG) #define FUTEX_UNLOCK_PI_PRIVATE (FUTEX_UNLOCK_PI | FUTEX_PRIVATE_FLAG) #define FUTEX_TRYLOCK_PI_PRIVATE (FUTEX_TRYLOCK_PI | FUTEX_PRIVATE_FLAG) #define FUTEX_WAIT_BITSET_PRIVATE (FUTEX_WAIT_BITSET | FUTEX_PRIVATE_FLAG) @@ -41,6 +43,31 @@ #define FUTEX_CMP_REQUEUE_PI_PRIVATE (FUTEX_CMP_REQUEUE_PI | \ FUTEX_PRIVATE_FLAG) +/* + * Flags to specify the bit length of the futex word for futex2 syscalls. + * Currently, only 32 is supported. + */ +#define FUTEX_32 2 + +/* + * Max numbers of elements in a futex_waitv array + */ +#define FUTEX_WAITV_MAX 128 + +/** + * struct futex_waitv - A waiter for vectorized wait + * @val: Expected value at uaddr + * @uaddr: User address to wait on + * @flags: Flags for this waiter + * @__reserved: Reserved member to preserve data alignment. Should be 0. + */ +struct futex_waitv { + __u64 val; + __u64 uaddr; + __u32 flags; + __u32 __reserved; +}; + /* * Support for robust futexes: the kernel cleans up held futexes at * thread exit time. diff --git a/linux-headers/include/linux/genetlink.h b/linux-headers/include/linux/genetlink.h index 9fa720ee87a..e9b8117bdcf 100644 --- a/linux-headers/include/linux/genetlink.h +++ b/linux-headers/include/linux/genetlink.h @@ -87,6 +87,8 @@ enum { __CTRL_ATTR_MCAST_GRP_MAX, }; +#define CTRL_ATTR_MCAST_GRP_MAX (__CTRL_ATTR_MCAST_GRP_MAX - 1) + enum { CTRL_ATTR_POLICY_UNSPEC, CTRL_ATTR_POLICY_DO, @@ -96,7 +98,6 @@ enum { CTRL_ATTR_POLICY_DUMP_MAX = __CTRL_ATTR_POLICY_DUMP_MAX - 1 }; -#define CTRL_ATTR_MCAST_GRP_MAX (__CTRL_ATTR_MCAST_GRP_MAX - 1) - +#define CTRL_ATTR_POLICY_MAX (__CTRL_ATTR_POLICY_DUMP_MAX - 1) #endif /* __LINUX_GENERIC_NETLINK_H */ diff --git a/linux-headers/include/linux/gfs2_ondisk.h b/linux-headers/include/linux/gfs2_ondisk.h index fcb9d1209e8..fc948f896b3 100644 --- a/linux-headers/include/linux/gfs2_ondisk.h +++ b/linux-headers/include/linux/gfs2_ondisk.h @@ -47,7 +47,7 @@ #define GFS2_FORMAT_DE 1200 #define GFS2_FORMAT_QU 1500 /* These are part of the superblock */ -#define GFS2_FORMAT_FS 1801 +#define GFS2_FORMAT_FS 1802 #define GFS2_FORMAT_MULTI 1900 /* @@ -389,8 +389,9 @@ struct gfs2_leaf { #define GFS2_EATYPE_USR 1 #define GFS2_EATYPE_SYS 2 #define GFS2_EATYPE_SECURITY 3 +#define GFS2_EATYPE_TRUSTED 4 -#define GFS2_EATYPE_LAST 3 +#define GFS2_EATYPE_LAST 4 #define GFS2_EATYPE_VALID(x) ((x) <= GFS2_EATYPE_LAST) #define GFS2_EAFLAG_LAST 0x01 /* last ea in block */ diff --git a/linux-headers/include/linux/gpio.h b/linux-headers/include/linux/gpio.h index b8d268787d8..f4ea0d614d5 100644 --- a/linux-headers/include/linux/gpio.h +++ b/linux-headers/include/linux/gpio.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ /* * - userspace ABI for the GPIO character devices * @@ -65,6 +65,9 @@ struct gpiochip_info { * @GPIO_V2_LINE_FLAG_BIAS_PULL_UP: line has pull-up bias enabled * @GPIO_V2_LINE_FLAG_BIAS_PULL_DOWN: line has pull-down bias enabled * @GPIO_V2_LINE_FLAG_BIAS_DISABLED: line has bias disabled + * @GPIO_V2_LINE_FLAG_EVENT_CLOCK_REALTIME: line events contain REALTIME timestamps + * @GPIO_V2_LINE_FLAG_EVENT_CLOCK_HTE: line events contain timestamps from + * hardware timestamp engine */ enum gpio_v2_line_flag { GPIO_V2_LINE_FLAG_USED = _BITULL(0), @@ -78,6 +81,8 @@ enum gpio_v2_line_flag { GPIO_V2_LINE_FLAG_BIAS_PULL_UP = _BITULL(8), GPIO_V2_LINE_FLAG_BIAS_PULL_DOWN = _BITULL(9), GPIO_V2_LINE_FLAG_BIAS_DISABLED = _BITULL(10), + GPIO_V2_LINE_FLAG_EVENT_CLOCK_REALTIME = _BITULL(11), + GPIO_V2_LINE_FLAG_EVENT_CLOCK_HTE = _BITULL(12), }; /** @@ -210,7 +215,7 @@ struct gpio_v2_line_request { * @offset: the local offset on this GPIO chip, fill this in when * requesting the line information from the kernel * @num_attrs: the number of attributes in @attrs - * @flags: flags for the GPIO lines, with values from &enum + * @flags: flags for this GPIO line, with values from &enum * gpio_v2_line_flag, such as %GPIO_V2_LINE_FLAG_ACTIVE_LOW, * %GPIO_V2_LINE_FLAG_OUTPUT etc, added together. * @attrs: the configuration attributes associated with the line @@ -270,9 +275,6 @@ enum gpio_v2_line_event_id { /** * struct gpio_v2_line_event - The actual event being pushed to userspace * @timestamp_ns: best estimate of time of event occurrence, in nanoseconds. - * The @timestamp_ns is read from %CLOCK_MONOTONIC and is intended to allow - * the accurate measurement of the time between events. It does not provide - * the wall-clock time. * @id: event identifier with value from &enum gpio_v2_line_event_id * @offset: the offset of the line that triggered the event * @seqno: the sequence number for this event in the sequence of events for @@ -280,6 +282,13 @@ enum gpio_v2_line_event_id { * @line_seqno: the sequence number for this event in the sequence of * events on this particular line * @padding: reserved for future use + * + * By default the @timestamp_ns is read from %CLOCK_MONOTONIC and is + * intended to allow the accurate measurement of the time between events. + * It does not provide the wall-clock time. + * + * If the %GPIO_V2_LINE_FLAG_EVENT_CLOCK_REALTIME flag is set then the + * @timestamp_ns is read from %CLOCK_REALTIME. */ struct gpio_v2_line_event { __aligned_u64 timestamp_ns; diff --git a/linux-headers/include/linux/gsmmux.h b/linux-headers/include/linux/gsmmux.h index cb8693b39cb..4c878d84dbd 100644 --- a/linux-headers/include/linux/gsmmux.h +++ b/linux-headers/include/linux/gsmmux.h @@ -2,10 +2,45 @@ #ifndef _LINUX_GSMMUX_H #define _LINUX_GSMMUX_H +#include #include #include #include +/* + * flags definition for n_gsm + * + * Used by: + * struct gsm_config_ext.flags + * struct gsm_dlci_config.flags + */ +/* Forces a DLCI reset if set. Otherwise, a DLCI reset is only done if + * incompatible settings were provided. Always cleared on retrieval. + */ +#define GSM_FL_RESTART _BITUL(0) + +/** + * struct gsm_config - n_gsm basic configuration parameters + * + * This structure is used in combination with GSMIOC_GETCONF and GSMIOC_SETCONF + * to retrieve and set the basic parameters of an n_gsm ldisc. + * struct gsm_config_ext can be used to configure extended ldisc parameters. + * + * All timers are in units of 1/100th of a second. + * + * @adaption: Convergence layer type + * @encapsulation: Framing (0 = basic option, 1 = advanced option) + * @initiator: Initiator or responder + * @t1: Acknowledgment timer + * @t2: Response timer for multiplexer control channel + * @t3: Response timer for wake-up procedure + * @n2: Maximum number of retransmissions + * @mru: Maximum incoming frame payload size + * @mtu: Maximum outgoing frame payload size + * @k: Window size + * @i: Frame type (1 = UIH, 2 = UI) + * @unused: Can not be used + */ struct gsm_config { unsigned int adaption; @@ -19,19 +54,32 @@ struct gsm_config unsigned int mtu; unsigned int k; unsigned int i; - unsigned int unused[8]; /* Padding for expansion without - breaking stuff */ + unsigned int unused[8]; }; #define GSMIOC_GETCONF _IOR('G', 0, struct gsm_config) #define GSMIOC_SETCONF _IOW('G', 1, struct gsm_config) +/** + * struct gsm_netconfig - n_gsm network configuration parameters + * + * This structure is used in combination with GSMIOC_ENABLE_NET and + * GSMIOC_DISABLE_NET to enable or disable a network data connection + * over a mux virtual tty channel. This is for modems that support + * data connections with raw IP frames instead of PPP. + * + * @adaption: Adaption to use in network mode. + * @protocol: Protocol to use - only ETH_P_IP supported. + * @unused2: Can not be used. + * @if_name: Interface name format string. + * @unused: Can not be used. + */ struct gsm_netconfig { - unsigned int adaption; /* Adaption to use in network mode */ - unsigned short protocol;/* Protocol to use - only ETH_P_IP supported */ + unsigned int adaption; + unsigned short protocol; unsigned short unused2; - char if_name[IFNAMSIZ]; /* interface name format string */ - __u8 unused[28]; /* For future use */ + char if_name[IFNAMSIZ]; + __u8 unused[28]; }; #define GSMIOC_ENABLE_NET _IOW('G', 2, struct gsm_netconfig) @@ -40,4 +88,60 @@ struct gsm_netconfig { /* get the base tty number for a configured gsmmux tty */ #define GSMIOC_GETFIRST _IOR('G', 4, __u32) +/** + * struct gsm_config_ext - n_gsm extended configuration parameters + * + * This structure is used in combination with GSMIOC_GETCONF_EXT and + * GSMIOC_SETCONF_EXT to retrieve and set the extended parameters of an + * n_gsm ldisc. + * + * All timers are in units of 1/100th of a second. + * + * @keep_alive: Control channel keep-alive in 1/100th of a second (0 to disable). + * @wait_config: Wait for DLCI config before opening virtual link? + * @flags: Mux specific flags. + * @reserved: For future use, must be initialized to zero. + */ +struct gsm_config_ext { + __u32 keep_alive; + __u32 wait_config; + __u32 flags; + __u32 reserved[5]; +}; + +#define GSMIOC_GETCONF_EXT _IOR('G', 5, struct gsm_config_ext) +#define GSMIOC_SETCONF_EXT _IOW('G', 6, struct gsm_config_ext) + +/** + * struct gsm_dlci_config - n_gsm channel configuration parameters + * + * This structure is used in combination with GSMIOC_GETCONF_DLCI and + * GSMIOC_SETCONF_DLCI to retrieve and set the channel specific parameters + * of an n_gsm ldisc. + * + * Set the channel accordingly before calling GSMIOC_GETCONF_DLCI. + * + * @channel: DLCI (0 for the associated DLCI). + * @adaption: Convergence layer type. + * @mtu: Maximum transfer unit. + * @priority: Priority (0 for default value). + * @i: Frame type (1 = UIH, 2 = UI). + * @k: Window size (0 for default value). + * @flags: DLCI specific flags. + * @reserved: For future use, must be initialized to zero. + */ +struct gsm_dlci_config { + __u32 channel; + __u32 adaption; + __u32 mtu; + __u32 priority; + __u32 i; + __u32 k; + __u32 flags; + __u32 reserved[7]; +}; + +#define GSMIOC_GETCONF_DLCI _IOWR('G', 7, struct gsm_dlci_config) +#define GSMIOC_SETCONF_DLCI _IOW('G', 8, struct gsm_dlci_config) + #endif diff --git a/linux-headers/include/linux/gtp.h b/linux-headers/include/linux/gtp.h index 878ddea318e..7c1a57024b9 100644 --- a/linux-headers/include/linux/gtp.h +++ b/linux-headers/include/linux/gtp.h @@ -8,6 +8,7 @@ enum gtp_genl_cmds { GTP_CMD_NEWPDP, GTP_CMD_DELPDP, GTP_CMD_GETPDP, + GTP_CMD_ECHOREQ, GTP_CMD_MAX, }; @@ -32,6 +33,6 @@ enum gtp_attrs { GTPA_PAD, __GTPA_MAX, }; -#define GTPA_MAX (__GTPA_MAX + 1) +#define GTPA_MAX (__GTPA_MAX - 1) #endif /* _LINUX_GTP_H_ */ diff --git a/linux-headers/include/linux/handshake.h b/linux-headers/include/linux/handshake.h new file mode 100644 index 00000000000..e6e8f67d2b5 --- /dev/null +++ b/linux-headers/include/linux/handshake.h @@ -0,0 +1,74 @@ +/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */ +/* Do not edit directly, auto-generated from: */ +/* Documentation/netlink/specs/handshake.yaml */ +/* YNL-GEN uapi header */ + +#ifndef _LINUX_HANDSHAKE_H +#define _LINUX_HANDSHAKE_H + +#define HANDSHAKE_FAMILY_NAME "handshake" +#define HANDSHAKE_FAMILY_VERSION 1 + +enum handshake_handler_class { + HANDSHAKE_HANDLER_CLASS_NONE, + HANDSHAKE_HANDLER_CLASS_TLSHD, + HANDSHAKE_HANDLER_CLASS_MAX, +}; + +enum handshake_msg_type { + HANDSHAKE_MSG_TYPE_UNSPEC, + HANDSHAKE_MSG_TYPE_CLIENTHELLO, + HANDSHAKE_MSG_TYPE_SERVERHELLO, +}; + +enum handshake_auth { + HANDSHAKE_AUTH_UNSPEC, + HANDSHAKE_AUTH_UNAUTH, + HANDSHAKE_AUTH_PSK, + HANDSHAKE_AUTH_X509, +}; + +enum { + HANDSHAKE_A_X509_CERT = 1, + HANDSHAKE_A_X509_PRIVKEY, + + __HANDSHAKE_A_X509_MAX, + HANDSHAKE_A_X509_MAX = (__HANDSHAKE_A_X509_MAX - 1) +}; + +enum { + HANDSHAKE_A_ACCEPT_SOCKFD = 1, + HANDSHAKE_A_ACCEPT_HANDLER_CLASS, + HANDSHAKE_A_ACCEPT_MESSAGE_TYPE, + HANDSHAKE_A_ACCEPT_TIMEOUT, + HANDSHAKE_A_ACCEPT_AUTH_MODE, + HANDSHAKE_A_ACCEPT_PEER_IDENTITY, + HANDSHAKE_A_ACCEPT_CERTIFICATE, + HANDSHAKE_A_ACCEPT_PEERNAME, + + __HANDSHAKE_A_ACCEPT_MAX, + HANDSHAKE_A_ACCEPT_MAX = (__HANDSHAKE_A_ACCEPT_MAX - 1) +}; + +enum { + HANDSHAKE_A_DONE_STATUS = 1, + HANDSHAKE_A_DONE_SOCKFD, + HANDSHAKE_A_DONE_REMOTE_AUTH, + + __HANDSHAKE_A_DONE_MAX, + HANDSHAKE_A_DONE_MAX = (__HANDSHAKE_A_DONE_MAX - 1) +}; + +enum { + HANDSHAKE_CMD_READY = 1, + HANDSHAKE_CMD_ACCEPT, + HANDSHAKE_CMD_DONE, + + __HANDSHAKE_CMD_MAX, + HANDSHAKE_CMD_MAX = (__HANDSHAKE_CMD_MAX - 1) +}; + +#define HANDSHAKE_MCGRP_NONE "none" +#define HANDSHAKE_MCGRP_TLSHD "tlshd" + +#endif /* _LINUX_HANDSHAKE_H */ diff --git a/linux-headers/include/linux/hid.h b/linux-headers/include/linux/hid.h index 311885576e5..ad13cf85a0a 100644 --- a/linux-headers/include/linux/hid.h +++ b/linux-headers/include/linux/hid.h @@ -42,16 +42,30 @@ #define USB_INTERFACE_PROTOCOL_KEYBOARD 1 #define USB_INTERFACE_PROTOCOL_MOUSE 2 +/* + * HID report types --- Ouch! HID spec says 1 2 3! + */ + +enum hid_report_type { + HID_INPUT_REPORT = 0, + HID_OUTPUT_REPORT = 1, + HID_FEATURE_REPORT = 2, + + HID_REPORT_TYPES, +}; + /* * HID class requests */ -#define HID_REQ_GET_REPORT 0x01 -#define HID_REQ_GET_IDLE 0x02 -#define HID_REQ_GET_PROTOCOL 0x03 -#define HID_REQ_SET_REPORT 0x09 -#define HID_REQ_SET_IDLE 0x0A -#define HID_REQ_SET_PROTOCOL 0x0B +enum hid_class_request { + HID_REQ_GET_REPORT = 0x01, + HID_REQ_GET_IDLE = 0x02, + HID_REQ_GET_PROTOCOL = 0x03, + HID_REQ_SET_REPORT = 0x09, + HID_REQ_SET_IDLE = 0x0A, + HID_REQ_SET_PROTOCOL = 0x0B, +}; /* * HID class descriptor types diff --git a/linux-headers/include/linux/hidraw.h b/linux-headers/include/linux/hidraw.h index f1ad78a947e..7532ca477bd 100644 --- a/linux-headers/include/linux/hidraw.h +++ b/linux-headers/include/linux/hidraw.h @@ -40,6 +40,12 @@ struct hidraw_devinfo { #define HIDIOCSFEATURE(len) _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x06, len) #define HIDIOCGFEATURE(len) _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x07, len) #define HIDIOCGRAWUNIQ(len) _IOC(_IOC_READ, 'H', 0x08, len) +/* The first byte of SINPUT and GINPUT is the report number */ +#define HIDIOCSINPUT(len) _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x09, len) +#define HIDIOCGINPUT(len) _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x0A, len) +/* The first byte of SOUTPUT and GOUTPUT is the report number */ +#define HIDIOCSOUTPUT(len) _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x0B, len) +#define HIDIOCGOUTPUT(len) _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x0C, len) #define HIDRAW_FIRST_MINOR 0 #define HIDRAW_MAX_DEVICES 64 diff --git a/linux-headers/include/linux/hsi/cs-protocol.h b/linux-headers/include/linux/hsi/cs-protocol.h index c7f6e7672cb..07c3bfb6746 100644 --- a/linux-headers/include/linux/hsi/cs-protocol.h +++ b/linux-headers/include/linux/hsi/cs-protocol.h @@ -6,20 +6,6 @@ * * Contact: Kai Vehmanen * Original author: Peter Ujfalusi - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA */ #ifndef _CS_PROTOCOL_H diff --git a/linux-headers/include/linux/hsi/hsi_char.h b/linux-headers/include/linux/hsi/hsi_char.h index 91623b0398b..5ef72f0daf9 100644 --- a/linux-headers/include/linux/hsi/hsi_char.h +++ b/linux-headers/include/linux/hsi/hsi_char.h @@ -5,20 +5,6 @@ * Copyright (C) 2010 Nokia Corporation. All rights reserved. * * Contact: Andras Domokos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA */ #ifndef __HSI_CHAR_H diff --git a/linux-headers/include/linux/hw_breakpoint.h b/linux-headers/include/linux/hw_breakpoint.h index 769a38bb703..6e4c69b02d1 100644 --- a/linux-headers/include/linux/hw_breakpoint.h +++ b/linux-headers/include/linux/hw_breakpoint.h @@ -22,14 +22,4 @@ enum { HW_BREAKPOINT_INVALID = HW_BREAKPOINT_RW | HW_BREAKPOINT_X, }; -enum bp_type_idx { - TYPE_INST = 0, -#ifdef CONFIG_HAVE_MIXED_BREAKPOINTS_REGS - TYPE_DATA = 0, -#else - TYPE_DATA = 1, -#endif - TYPE_MAX -}; - #endif /* _LINUX_HW_BREAKPOINT_H */ diff --git a/linux-headers/include/linux/hyperv.h b/linux-headers/include/linux/hyperv.h index af923077078..d95359ecfb5 100644 --- a/linux-headers/include/linux/hyperv.h +++ b/linux-headers/include/linux/hyperv.h @@ -26,7 +26,7 @@ #ifndef _HYPERV_H #define _HYPERV_H -#include +#include /* * Framework version for util services. @@ -90,6 +90,17 @@ struct hv_vss_check_dm_info { __u32 flags; } __attribute__((packed)); +/* + * struct hv_vss_msg encodes the fields that the Linux VSS + * driver accesses. However, FREEZE messages from Hyper-V contain + * additional LUN information that Linux doesn't use and are not + * represented in struct hv_vss_msg. A received FREEZE message may + * be as large as 6,260 bytes, so the driver must allocate at least + * that much space, not sizeof(struct hv_vss_msg). Other messages + * such as AUTO_RECOVER may be as large as 12,500 bytes. However, + * because the Linux VSS driver responds that it doesn't support + * auto-recovery, it should not receive such messages. + */ struct hv_vss_msg { union { struct hv_vss_hdr vss_hdr; diff --git a/linux-headers/include/linux/i2c-dev.h b/linux-headers/include/linux/i2c-dev.h index 46e7a475cc9..2a3807a9d2e 100644 --- a/linux-headers/include/linux/i2c-dev.h +++ b/linux-headers/include/linux/i2c-dev.h @@ -1,25 +1,10 @@ /* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ /* - i2c-dev.h - i2c-bus driver, char device interface - - Copyright (C) 1995-97 Simon G. Vogl - Copyright (C) 1998-99 Frodo Looijaard - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - MA 02110-1301 USA. -*/ + * i2c-dev.h - I2C bus char device interface + * + * Copyright (C) 1995-97 Simon G. Vogl + * Copyright (C) 1998-99 Frodo Looijaard + */ #ifndef _LINUX_I2C_DEV_H #define _LINUX_I2C_DEV_H diff --git a/linux-headers/include/linux/i2c.h b/linux-headers/include/linux/i2c.h index 3dd1f72a130..7144751fa27 100644 --- a/linux-headers/include/linux/i2c.h +++ b/linux-headers/include/linux/i2c.h @@ -1,29 +1,11 @@ /* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ -/* ------------------------------------------------------------------------- */ -/* */ -/* i2c.h - definitions for the i2c-bus interface */ -/* */ -/* ------------------------------------------------------------------------- */ -/* Copyright (C) 1995-2000 Simon G. Vogl - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - MA 02110-1301 USA. */ -/* ------------------------------------------------------------------------- */ - -/* With some changes from Kyösti Mälkki and - Frodo Looijaard */ +/* + * i2c.h - definitions for the I2C bus interface + * + * Copyright (C) 1995-2000 Simon G. Vogl + * With some changes from Kyösti Mälkki and + * Frodo Looijaard + */ #ifndef _LINUX_I2C_H #define _LINUX_I2C_H @@ -32,18 +14,41 @@ /** * struct i2c_msg - an I2C transaction segment beginning with START - * @addr: Slave address, either seven or ten bits. When this is a ten - * bit address, I2C_M_TEN must be set in @flags and the adapter - * must support I2C_FUNC_10BIT_ADDR. - * @flags: I2C_M_RD is handled by all adapters. No other flags may be - * provided unless the adapter exported the relevant I2C_FUNC_* - * flags through i2c_check_functionality(). - * @len: Number of data bytes in @buf being read from or written to the - * I2C slave address. For read transactions where I2C_M_RECV_LEN - * is set, the caller guarantees that this buffer can hold up to - * 32 bytes in addition to the initial length byte sent by the - * slave (plus, if used, the SMBus PEC); and this value will be - * incremented by the number of block data bytes received. + * + * @addr: Slave address, either 7 or 10 bits. When this is a 10 bit address, + * %I2C_M_TEN must be set in @flags and the adapter must support + * %I2C_FUNC_10BIT_ADDR. + * + * @flags: + * Supported by all adapters: + * %I2C_M_RD: read data (from slave to master). Guaranteed to be 0x0001! + * + * Optional: + * %I2C_M_DMA_SAFE: the buffer of this message is DMA safe. Makes only sense + * in kernelspace, because userspace buffers are copied anyway + * + * Only if I2C_FUNC_10BIT_ADDR is set: + * %I2C_M_TEN: this is a 10 bit chip address + * + * Only if I2C_FUNC_SMBUS_READ_BLOCK_DATA is set: + * %I2C_M_RECV_LEN: message length will be first received byte + * + * Only if I2C_FUNC_NOSTART is set: + * %I2C_M_NOSTART: skip repeated start sequence + + * Only if I2C_FUNC_PROTOCOL_MANGLING is set: + * %I2C_M_NO_RD_ACK: in a read message, master ACK/NACK bit is skipped + * %I2C_M_IGNORE_NAK: treat NACK from client as ACK + * %I2C_M_REV_DIR_ADDR: toggles the Rd/Wr bit + * %I2C_M_STOP: force a STOP condition after the message + * + * @len: Number of data bytes in @buf being read from or written to the I2C + * slave address. For read transactions where %I2C_M_RECV_LEN is set, the + * caller guarantees that this buffer can hold up to %I2C_SMBUS_BLOCK_MAX + * bytes in addition to the initial length byte sent by the slave (plus, + * if used, the SMBus PEC); and this value will be incremented by the number + * of block data bytes received. + * * @buf: The buffer into which data is read, or from which it's written. * * An i2c_msg is the low level representation of one segment of an I2C @@ -60,40 +65,36 @@ * group, it is followed by a STOP. Otherwise it is followed by the next * @i2c_msg transaction segment, beginning with a (repeated) START. * - * Alternatively, when the adapter supports I2C_FUNC_PROTOCOL_MANGLING then + * Alternatively, when the adapter supports %I2C_FUNC_PROTOCOL_MANGLING then * passing certain @flags may have changed those standard protocol behaviors. * Those flags are only for use with broken/nonconforming slaves, and with - * adapters which are known to support the specific mangling options they - * need (one or more of IGNORE_NAK, NO_RD_ACK, NOSTART, and REV_DIR_ADDR). + * adapters which are known to support the specific mangling options they need. */ struct i2c_msg { - __u16 addr; /* slave address */ + __u16 addr; __u16 flags; -#define I2C_M_RD 0x0001 /* read data, from slave to master */ - /* I2C_M_RD is guaranteed to be 0x0001! */ -#define I2C_M_TEN 0x0010 /* this is a ten bit chip address */ -#define I2C_M_DMA_SAFE 0x0200 /* the buffer of this message is DMA safe */ - /* makes only sense in kernelspace */ - /* userspace buffers are copied anyway */ -#define I2C_M_RECV_LEN 0x0400 /* length will be first received byte */ -#define I2C_M_NO_RD_ACK 0x0800 /* if I2C_FUNC_PROTOCOL_MANGLING */ -#define I2C_M_IGNORE_NAK 0x1000 /* if I2C_FUNC_PROTOCOL_MANGLING */ -#define I2C_M_REV_DIR_ADDR 0x2000 /* if I2C_FUNC_PROTOCOL_MANGLING */ -#define I2C_M_NOSTART 0x4000 /* if I2C_FUNC_NOSTART */ -#define I2C_M_STOP 0x8000 /* if I2C_FUNC_PROTOCOL_MANGLING */ - __u16 len; /* msg length */ - __u8 *buf; /* pointer to msg data */ +#define I2C_M_RD 0x0001 /* guaranteed to be 0x0001! */ +#define I2C_M_TEN 0x0010 /* use only if I2C_FUNC_10BIT_ADDR */ +#define I2C_M_DMA_SAFE 0x0200 /* use only in kernel space */ +#define I2C_M_RECV_LEN 0x0400 /* use only if I2C_FUNC_SMBUS_READ_BLOCK_DATA */ +#define I2C_M_NO_RD_ACK 0x0800 /* use only if I2C_FUNC_PROTOCOL_MANGLING */ +#define I2C_M_IGNORE_NAK 0x1000 /* use only if I2C_FUNC_PROTOCOL_MANGLING */ +#define I2C_M_REV_DIR_ADDR 0x2000 /* use only if I2C_FUNC_PROTOCOL_MANGLING */ +#define I2C_M_NOSTART 0x4000 /* use only if I2C_FUNC_NOSTART */ +#define I2C_M_STOP 0x8000 /* use only if I2C_FUNC_PROTOCOL_MANGLING */ + __u16 len; + __u8 *buf; }; /* To determine what functionality is present */ #define I2C_FUNC_I2C 0x00000001 -#define I2C_FUNC_10BIT_ADDR 0x00000002 -#define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_IGNORE_NAK etc. */ +#define I2C_FUNC_10BIT_ADDR 0x00000002 /* required for I2C_M_TEN */ +#define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* required for I2C_M_IGNORE_NAK etc. */ #define I2C_FUNC_SMBUS_PEC 0x00000008 -#define I2C_FUNC_NOSTART 0x00000010 /* I2C_M_NOSTART */ +#define I2C_FUNC_NOSTART 0x00000010 /* required for I2C_M_NOSTART */ #define I2C_FUNC_SLAVE 0x00000020 -#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */ +#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 or later */ #define I2C_FUNC_SMBUS_QUICK 0x00010000 #define I2C_FUNC_SMBUS_READ_BYTE 0x00020000 #define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000 @@ -102,11 +103,11 @@ struct i2c_msg { #define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000 #define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000 #define I2C_FUNC_SMBUS_PROC_CALL 0x00800000 -#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000 +#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000 /* required for I2C_M_RECV_LEN */ #define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000 #define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000 /* I2C-like block xfer */ #define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */ -#define I2C_FUNC_SMBUS_HOST_NOTIFY 0x10000000 +#define I2C_FUNC_SMBUS_HOST_NOTIFY 0x10000000 /* SMBus 2.0 or later */ #define I2C_FUNC_SMBUS_BYTE (I2C_FUNC_SMBUS_READ_BYTE | \ I2C_FUNC_SMBUS_WRITE_BYTE) @@ -128,6 +129,11 @@ struct i2c_msg { I2C_FUNC_SMBUS_I2C_BLOCK | \ I2C_FUNC_SMBUS_PEC) +/* if I2C_M_RECV_LEN is also supported */ +#define I2C_FUNC_SMBUS_EMUL_ALL (I2C_FUNC_SMBUS_EMUL | \ + I2C_FUNC_SMBUS_READ_BLOCK_DATA | \ + I2C_FUNC_SMBUS_BLOCK_PROC_CALL) + /* * Data for SMBus Messages */ diff --git a/linux-headers/include/linux/icmp.h b/linux-headers/include/linux/icmp.h index d10eb31f29b..62963c69992 100644 --- a/linux-headers/include/linux/icmp.h +++ b/linux-headers/include/linux/icmp.h @@ -20,6 +20,8 @@ #include #include +#include +#include #define ICMP_ECHOREPLY 0 /* Echo Reply */ #define ICMP_DEST_UNREACH 3 /* Destination Unreachable */ @@ -66,6 +68,23 @@ #define ICMP_EXC_TTL 0 /* TTL count exceeded */ #define ICMP_EXC_FRAGTIME 1 /* Fragment Reass time exceeded */ +/* Codes for EXT_ECHO (PROBE) */ +#define ICMP_EXT_ECHO 42 +#define ICMP_EXT_ECHOREPLY 43 +#define ICMP_EXT_CODE_MAL_QUERY 1 /* Malformed Query */ +#define ICMP_EXT_CODE_NO_IF 2 /* No such Interface */ +#define ICMP_EXT_CODE_NO_TABLE_ENT 3 /* No such Table Entry */ +#define ICMP_EXT_CODE_MULT_IFS 4 /* Multiple Interfaces Satisfy Query */ + +/* Constants for EXT_ECHO (PROBE) */ +#define ICMP_EXT_ECHOREPLY_ACTIVE (1 << 2)/* active bit in reply message */ +#define ICMP_EXT_ECHOREPLY_IPV4 (1 << 1)/* ipv4 bit in reply message */ +#define ICMP_EXT_ECHOREPLY_IPV6 1 /* ipv6 bit in reply message */ +#define ICMP_EXT_ECHO_CTYPE_NAME 1 +#define ICMP_EXT_ECHO_CTYPE_INDEX 2 +#define ICMP_EXT_ECHO_CTYPE_ADDR 3 +#define ICMP_AFI_IP 1 /* Address Family Identifier for ipv4 */ +#define ICMP_AFI_IP6 2 /* Address Family Identifier for ipv6 */ struct icmphdr { __u8 type; @@ -118,4 +137,26 @@ struct icmp_extobj_hdr { __u8 class_type; }; +/* RFC 8335: 2.1 Header for c-type 3 payload */ +struct icmp_ext_echo_ctype3_hdr { + __be16 afi; + __u8 addrlen; + __u8 reserved; +}; + +/* RFC 8335: 2.1 Interface Identification Object */ +struct icmp_ext_echo_iio { + struct icmp_extobj_hdr extobj_hdr; + union { + char name[IFNAMSIZ]; + __be32 ifindex; + struct { + struct icmp_ext_echo_ctype3_hdr ctype3_hdr; + union { + __be32 ipv4_addr; + struct in6_addr ipv6_addr; + } ip_addr; + } addr; + } ident; +}; #endif /* _LINUX_ICMP_H */ diff --git a/linux-headers/include/linux/icmpv6.h b/linux-headers/include/linux/icmpv6.h index fcea1c50505..fa6388c0979 100644 --- a/linux-headers/include/linux/icmpv6.h +++ b/linux-headers/include/linux/icmpv6.h @@ -140,6 +140,9 @@ struct icmp6hdr { #define ICMPV6_UNK_OPTION 2 #define ICMPV6_HDR_INCOMP 3 +/* Codes for EXT_ECHO (PROBE) */ +#define ICMPV6_EXT_ECHO_REQUEST 160 +#define ICMPV6_EXT_ECHO_REPLY 161 /* * constants for (set|get)sockopt */ diff --git a/linux-headers/include/linux/idxd.h b/linux-headers/include/linux/idxd.h index 9104a41b468..b59d8a8809c 100644 --- a/linux-headers/include/linux/idxd.h +++ b/linux-headers/include/linux/idxd.h @@ -1,10 +1,37 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* SPDX-License-Identifier: LGPL-2.1 WITH Linux-syscall-note */ /* Copyright(c) 2019 Intel Corporation. All rights rsvd. */ #ifndef _USR_IDXD_H_ #define _USR_IDXD_H_ #include +/* Driver command error status */ +enum idxd_scmd_stat { + IDXD_SCMD_DEV_ENABLED = 0x80000010, + IDXD_SCMD_DEV_NOT_ENABLED = 0x80000020, + IDXD_SCMD_WQ_ENABLED = 0x80000021, + IDXD_SCMD_DEV_DMA_ERR = 0x80020000, + IDXD_SCMD_WQ_NO_GRP = 0x80030000, + IDXD_SCMD_WQ_NO_NAME = 0x80040000, + IDXD_SCMD_WQ_NO_SVM = 0x80050000, + IDXD_SCMD_WQ_NO_THRESH = 0x80060000, + IDXD_SCMD_WQ_PORTAL_ERR = 0x80070000, + IDXD_SCMD_WQ_RES_ALLOC_ERR = 0x80080000, + IDXD_SCMD_PERCPU_ERR = 0x80090000, + IDXD_SCMD_DMA_CHAN_ERR = 0x800a0000, + IDXD_SCMD_CDEV_ERR = 0x800b0000, + IDXD_SCMD_WQ_NO_SWQ_SUPPORT = 0x800c0000, + IDXD_SCMD_WQ_NONE_CONFIGURED = 0x800d0000, + IDXD_SCMD_WQ_NO_SIZE = 0x800e0000, + IDXD_SCMD_WQ_NO_PRIV = 0x800f0000, + IDXD_SCMD_WQ_IRQ_ERR = 0x80100000, + IDXD_SCMD_WQ_USER_NO_IOMMU = 0x80110000, + IDXD_SCMD_DEV_EVL_ERR = 0x80120000, +}; + +#define IDXD_SCMD_SOFTERR_MASK 0x80000000 +#define IDXD_SCMD_SOFTERR_SHIFT 16 + /* Descriptor flags */ #define IDXD_OP_FLAG_FENCE 0x0001 #define IDXD_OP_FLAG_BOF 0x0002 @@ -22,6 +49,14 @@ #define IDXD_OP_FLAG_DRDBK 0x4000 #define IDXD_OP_FLAG_DSTS 0x8000 +/* IAX */ +#define IDXD_OP_FLAG_RD_SRC2_AECS 0x010000 +#define IDXD_OP_FLAG_RD_SRC2_2ND 0x020000 +#define IDXD_OP_FLAG_WR_SRC2_AECS_COMP 0x040000 +#define IDXD_OP_FLAG_WR_SRC2_AECS_OVFL 0x080000 +#define IDXD_OP_FLAG_SRC2_STS 0x100000 +#define IDXD_OP_FLAG_CRC_RFC3720 0x200000 + /* Opcode */ enum dsa_opcode { DSA_OPCODE_NOOP = 0, @@ -34,15 +69,37 @@ enum dsa_opcode { DSA_OPCODE_CR_DELTA, DSA_OPCODE_AP_DELTA, DSA_OPCODE_DUALCAST, + DSA_OPCODE_TRANSL_FETCH, DSA_OPCODE_CRCGEN = 0x10, DSA_OPCODE_COPY_CRC, DSA_OPCODE_DIF_CHECK, DSA_OPCODE_DIF_INS, DSA_OPCODE_DIF_STRP, DSA_OPCODE_DIF_UPDT, + DSA_OPCODE_DIX_GEN = 0x17, DSA_OPCODE_CFLUSH = 0x20, }; +enum iax_opcode { + IAX_OPCODE_NOOP = 0, + IAX_OPCODE_DRAIN = 2, + IAX_OPCODE_MEMMOVE, + IAX_OPCODE_DECOMPRESS = 0x42, + IAX_OPCODE_COMPRESS, + IAX_OPCODE_CRC64, + IAX_OPCODE_ZERO_DECOMP_32 = 0x48, + IAX_OPCODE_ZERO_DECOMP_16, + IAX_OPCODE_ZERO_COMP_32 = 0x4c, + IAX_OPCODE_ZERO_COMP_16, + IAX_OPCODE_SCAN = 0x50, + IAX_OPCODE_SET_MEMBER, + IAX_OPCODE_EXTRACT, + IAX_OPCODE_SELECT, + IAX_OPCODE_RLE_BURST, + IAX_OPCODE_FIND_UNIQUE, + IAX_OPCODE_EXPAND, +}; + /* Completion record status */ enum dsa_completion_status { DSA_COMP_NONE = 0, @@ -74,10 +131,44 @@ enum dsa_completion_status { DSA_COMP_HW_ERR1, DSA_COMP_HW_ERR_DRB, DSA_COMP_TRANSLATION_FAIL, + DSA_COMP_DRAIN_EVL = 0x26, + DSA_COMP_BATCH_EVL_ERR, +}; + +enum iax_completion_status { + IAX_COMP_NONE = 0, + IAX_COMP_SUCCESS, + IAX_COMP_PAGE_FAULT_IR = 0x04, + IAX_COMP_ANALYTICS_ERROR = 0x0a, + IAX_COMP_OUTBUF_OVERFLOW, + IAX_COMP_BAD_OPCODE = 0x10, + IAX_COMP_INVALID_FLAGS, + IAX_COMP_NOZERO_RESERVE, + IAX_COMP_INVALID_SIZE, + IAX_COMP_OVERLAP_BUFFERS = 0x16, + IAX_COMP_INT_HANDLE_INVAL = 0x19, + IAX_COMP_CRA_XLAT, + IAX_COMP_CRA_ALIGN, + IAX_COMP_ADDR_ALIGN, + IAX_COMP_PRIV_BAD, + IAX_COMP_TRAFFIC_CLASS_CONF, + IAX_COMP_PFAULT_RDBA, + IAX_COMP_HW_ERR1, + IAX_COMP_HW_ERR_DRB, + IAX_COMP_TRANSLATION_FAIL, + IAX_COMP_PRS_TIMEOUT, + IAX_COMP_WATCHDOG, + IAX_COMP_INVALID_COMP_FLAG = 0x30, + IAX_COMP_INVALID_FILTER_FLAG, + IAX_COMP_INVALID_INPUT_SIZE, + IAX_COMP_INVALID_NUM_ELEMS, + IAX_COMP_INVALID_SRC1_WIDTH, + IAX_COMP_INVALID_INVERT_OUT, }; #define DSA_COMP_STATUS_MASK 0x7f #define DSA_COMP_STATUS_WRITE 0x80 +#define DSA_COMP_STATUS(status) ((status) & DSA_COMP_STATUS_MASK) struct dsa_hw_desc { uint32_t pasid:20; @@ -91,6 +182,8 @@ struct dsa_hw_desc { uint64_t rdback_addr; uint64_t pattern; uint64_t desc_list_addr; + uint64_t pattern_lower; + uint64_t transl_fetch_addr; }; union { uint64_t dst_addr; @@ -101,6 +194,7 @@ struct dsa_hw_desc { union { uint32_t xfer_size; uint32_t desc_count; + uint32_t region_size; }; uint16_t int_handle; uint16_t rsvd1; @@ -155,10 +249,52 @@ struct dsa_hw_desc { uint16_t dest_app_tag_seed; }; + /* Fill */ + uint64_t pattern_upper; + + /* Translation fetch */ + struct { + uint64_t transl_fetch_res; + uint32_t region_stride; + }; + + /* DIX generate */ + struct { + uint8_t dix_gen_res; + uint8_t dest_dif_flags; + uint8_t dif_flags; + uint8_t dix_gen_res2[13]; + uint32_t ref_tag_seed; + uint16_t app_tag_mask; + uint16_t app_tag_seed; + }; + uint8_t op_specific[24]; }; } __attribute__((packed)); +struct iax_hw_desc { + uint32_t pasid:20; + uint32_t rsvd:11; + uint32_t priv:1; + uint32_t flags:24; + uint32_t opcode:8; + uint64_t completion_addr; + uint64_t src1_addr; + uint64_t dst_addr; + uint32_t src1_size; + uint16_t int_handle; + union { + uint16_t compr_flags; + uint16_t decompr_flags; + }; + uint64_t src2_addr; + uint32_t max_dst_size; + uint32_t src2_size; + uint32_t filter_flags; + uint32_t num_inputs; +} __attribute__((packed)); + struct dsa_raw_desc { uint64_t field[8]; } __attribute__((packed)); @@ -173,8 +309,12 @@ struct dsa_completion_record { uint8_t result; uint8_t dif_status; }; - uint16_t rsvd; - uint32_t bytes_completed; + uint8_t fault_info; + uint8_t rsvd; + union { + uint32_t bytes_completed; + uint32_t descs_completed; + }; uint64_t fault_addr; union { /* common record */ @@ -183,8 +323,8 @@ struct dsa_completion_record { uint32_t rsvd2:8; }; - uint16_t delta_rec_size; - uint16_t crc_val; + uint32_t delta_rec_size; + uint64_t crc_val; /* DIF check & strip */ struct { @@ -211,6 +351,14 @@ struct dsa_completion_record { uint16_t dif_upd_dest_app_tag; }; + /* DIX generate */ + struct { + uint64_t dix_gen_res; + uint32_t dix_ref_tag; + uint16_t dix_app_tag_mask; + uint16_t dix_app_tag; + }; + uint8_t op_specific[16]; }; } __attribute__((packed)); @@ -219,4 +367,28 @@ struct dsa_raw_completion_record { uint64_t field[4]; } __attribute__((packed)); +struct iax_completion_record { + __volatile__ uint8_t status; + uint8_t error_code; + uint8_t fault_info; + uint8_t rsvd; + uint32_t bytes_completed; + uint64_t fault_addr; + uint32_t invalid_flags; + uint32_t rsvd2; + uint32_t output_size; + uint8_t output_bits; + uint8_t rsvd3; + uint16_t xor_csum; + uint32_t crc; + uint32_t min; + uint32_t max; + uint32_t sum; + uint64_t rsvd4[2]; +} __attribute__((packed)); + +struct iax_raw_completion_record { + uint64_t field[8]; +} __attribute__((packed)); + #endif diff --git a/linux-headers/include/linux/if_addr.h b/linux-headers/include/linux/if_addr.h index c4dd87f9b44..d6db3ff7fa1 100644 --- a/linux-headers/include/linux/if_addr.h +++ b/linux-headers/include/linux/if_addr.h @@ -33,8 +33,9 @@ enum { IFA_CACHEINFO, IFA_MULTICAST, IFA_FLAGS, - IFA_RT_PRIORITY, /* u32, priority/metric for prefix route */ + IFA_RT_PRIORITY, /* u32, priority/metric for prefix route */ IFA_TARGET_NETNSID, + IFA_PROTO, /* u8, address protocol */ __IFA_MAX, }; @@ -67,4 +68,10 @@ struct ifa_cacheinfo { #define IFA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifaddrmsg)))) #define IFA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifaddrmsg)) +/* ifa_proto */ +#define IFAPROT_UNSPEC 0 +#define IFAPROT_KERNEL_LO 1 /* loopback */ +#define IFAPROT_KERNEL_RA 2 /* set by kernel from router announcement */ +#define IFAPROT_KERNEL_LL 3 /* link-local set by kernel */ + #endif diff --git a/linux-headers/include/linux/if_alg.h b/linux-headers/include/linux/if_alg.h index dc52a11ba6d..0824fbc026a 100644 --- a/linux-headers/include/linux/if_alg.h +++ b/linux-headers/include/linux/if_alg.h @@ -42,7 +42,7 @@ struct sockaddr_alg_new { struct af_alg_iv { __u32 ivlen; - __u8 iv[0]; + __u8 iv[]; }; /* Socket options */ @@ -52,6 +52,7 @@ struct af_alg_iv { #define ALG_SET_AEAD_ASSOCLEN 4 #define ALG_SET_AEAD_AUTHSIZE 5 #define ALG_SET_DRBG_ENTROPY 6 +#define ALG_SET_KEY_BY_KEY_SERIAL 7 /* Operations */ #define ALG_OP_DECRYPT 0 diff --git a/linux-headers/include/linux/if_arcnet.h b/linux-headers/include/linux/if_arcnet.h index 683878036d7..b122cfac712 100644 --- a/linux-headers/include/linux/if_arcnet.h +++ b/linux-headers/include/linux/if_arcnet.h @@ -60,7 +60,7 @@ struct arc_rfc1201 { __u8 proto; /* protocol ID field - varies */ __u8 split_flag; /* for use with split packets */ __be16 sequence; /* sequence number */ - __u8 payload[0]; /* space remaining in packet (504 bytes)*/ + __u8 payload[]; /* space remaining in packet (504 bytes)*/ }; #define RFC1201_HDR_SIZE 4 @@ -69,7 +69,7 @@ struct arc_rfc1201 { */ struct arc_rfc1051 { __u8 proto; /* ARC_P_RFC1051_ARP/RFC1051_IP */ - __u8 payload[0]; /* 507 bytes */ + __u8 payload[]; /* 507 bytes */ }; #define RFC1051_HDR_SIZE 1 @@ -80,7 +80,7 @@ struct arc_rfc1051 { struct arc_eth_encap { __u8 proto; /* Always ARC_P_ETHER */ struct ethhdr eth; /* standard ethernet header (yuck!) */ - __u8 payload[0]; /* 493 bytes */ + __u8 payload[]; /* 493 bytes */ }; #define ETH_ENCAP_HDR_SIZE 14 diff --git a/linux-headers/include/linux/if_arp.h b/linux-headers/include/linux/if_arp.h index dbfbc227deb..12d06bb6d87 100644 --- a/linux-headers/include/linux/if_arp.h +++ b/linux-headers/include/linux/if_arp.h @@ -54,6 +54,7 @@ #define ARPHRD_X25 271 /* CCITT X.25 */ #define ARPHRD_HWX25 272 /* Boards with X.25 in firmware */ #define ARPHRD_CAN 280 /* Controller Area Network */ +#define ARPHRD_MCTP 290 #define ARPHRD_PPP 512 #define ARPHRD_CISCO 513 /* Cisco HDLC */ #define ARPHRD_HDLC ARPHRD_CISCO diff --git a/linux-headers/include/linux/if_bonding.h b/linux-headers/include/linux/if_bonding.h index 45f3750aa86..d174914a837 100644 --- a/linux-headers/include/linux/if_bonding.h +++ b/linux-headers/include/linux/if_bonding.h @@ -94,6 +94,7 @@ #define BOND_XMIT_POLICY_LAYER23 2 /* layer 2+3 (IP ^ MAC) */ #define BOND_XMIT_POLICY_ENCAP23 3 /* encapsulated layer 2+3 */ #define BOND_XMIT_POLICY_ENCAP34 4 /* encapsulated layer 3+4 */ +#define BOND_XMIT_POLICY_VLAN_SRCMAC 5 /* vlan + source MAC */ /* 802.3ad port state definitions (43.4.2.2 in the 802.3ad standard) */ #define LACP_STATE_LACP_ACTIVITY 0x1 @@ -152,14 +153,3 @@ enum { #define BOND_3AD_STAT_MAX (__BOND_3AD_STAT_MAX - 1) #endif /* _LINUX_IF_BONDING_H */ - -/* - * Local variables: - * version-control: t - * kept-new-versions: 5 - * c-indent-level: 8 - * c-basic-offset: 8 - * tab-width: 8 - * End: - */ - diff --git a/linux-headers/include/linux/if_bridge.h b/linux-headers/include/linux/if_bridge.h index 69b99901fc5..e3d55b12bfb 100644 --- a/linux-headers/include/linux/if_bridge.h +++ b/linux-headers/include/linux/if_bridge.h @@ -121,6 +121,8 @@ enum { IFLA_BRIDGE_VLAN_INFO, IFLA_BRIDGE_VLAN_TUNNEL_INFO, IFLA_BRIDGE_MRP, + IFLA_BRIDGE_CFM, + IFLA_BRIDGE_MST, __IFLA_BRIDGE_MAX, }; #define IFLA_BRIDGE_MAX (__IFLA_BRIDGE_MAX - 1) @@ -328,6 +330,145 @@ struct br_mrp_start_in_test { __u16 in_id; }; +enum { + IFLA_BRIDGE_CFM_UNSPEC, + IFLA_BRIDGE_CFM_MEP_CREATE, + IFLA_BRIDGE_CFM_MEP_DELETE, + IFLA_BRIDGE_CFM_MEP_CONFIG, + IFLA_BRIDGE_CFM_CC_CONFIG, + IFLA_BRIDGE_CFM_CC_PEER_MEP_ADD, + IFLA_BRIDGE_CFM_CC_PEER_MEP_REMOVE, + IFLA_BRIDGE_CFM_CC_RDI, + IFLA_BRIDGE_CFM_CC_CCM_TX, + IFLA_BRIDGE_CFM_MEP_CREATE_INFO, + IFLA_BRIDGE_CFM_MEP_CONFIG_INFO, + IFLA_BRIDGE_CFM_CC_CONFIG_INFO, + IFLA_BRIDGE_CFM_CC_RDI_INFO, + IFLA_BRIDGE_CFM_CC_CCM_TX_INFO, + IFLA_BRIDGE_CFM_CC_PEER_MEP_INFO, + IFLA_BRIDGE_CFM_MEP_STATUS_INFO, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO, + __IFLA_BRIDGE_CFM_MAX, +}; + +#define IFLA_BRIDGE_CFM_MAX (__IFLA_BRIDGE_CFM_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_MEP_CREATE_UNSPEC, + IFLA_BRIDGE_CFM_MEP_CREATE_INSTANCE, + IFLA_BRIDGE_CFM_MEP_CREATE_DOMAIN, + IFLA_BRIDGE_CFM_MEP_CREATE_DIRECTION, + IFLA_BRIDGE_CFM_MEP_CREATE_IFINDEX, + __IFLA_BRIDGE_CFM_MEP_CREATE_MAX, +}; + +#define IFLA_BRIDGE_CFM_MEP_CREATE_MAX (__IFLA_BRIDGE_CFM_MEP_CREATE_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_MEP_DELETE_UNSPEC, + IFLA_BRIDGE_CFM_MEP_DELETE_INSTANCE, + __IFLA_BRIDGE_CFM_MEP_DELETE_MAX, +}; + +#define IFLA_BRIDGE_CFM_MEP_DELETE_MAX (__IFLA_BRIDGE_CFM_MEP_DELETE_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_MEP_CONFIG_UNSPEC, + IFLA_BRIDGE_CFM_MEP_CONFIG_INSTANCE, + IFLA_BRIDGE_CFM_MEP_CONFIG_UNICAST_MAC, + IFLA_BRIDGE_CFM_MEP_CONFIG_MDLEVEL, + IFLA_BRIDGE_CFM_MEP_CONFIG_MEPID, + __IFLA_BRIDGE_CFM_MEP_CONFIG_MAX, +}; + +#define IFLA_BRIDGE_CFM_MEP_CONFIG_MAX (__IFLA_BRIDGE_CFM_MEP_CONFIG_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_CC_CONFIG_UNSPEC, + IFLA_BRIDGE_CFM_CC_CONFIG_INSTANCE, + IFLA_BRIDGE_CFM_CC_CONFIG_ENABLE, + IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL, + IFLA_BRIDGE_CFM_CC_CONFIG_EXP_MAID, + __IFLA_BRIDGE_CFM_CC_CONFIG_MAX, +}; + +#define IFLA_BRIDGE_CFM_CC_CONFIG_MAX (__IFLA_BRIDGE_CFM_CC_CONFIG_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_CC_PEER_MEP_UNSPEC, + IFLA_BRIDGE_CFM_CC_PEER_MEP_INSTANCE, + IFLA_BRIDGE_CFM_CC_PEER_MEPID, + __IFLA_BRIDGE_CFM_CC_PEER_MEP_MAX, +}; + +#define IFLA_BRIDGE_CFM_CC_PEER_MEP_MAX (__IFLA_BRIDGE_CFM_CC_PEER_MEP_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_CC_RDI_UNSPEC, + IFLA_BRIDGE_CFM_CC_RDI_INSTANCE, + IFLA_BRIDGE_CFM_CC_RDI_RDI, + __IFLA_BRIDGE_CFM_CC_RDI_MAX, +}; + +#define IFLA_BRIDGE_CFM_CC_RDI_MAX (__IFLA_BRIDGE_CFM_CC_RDI_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_CC_CCM_TX_UNSPEC, + IFLA_BRIDGE_CFM_CC_CCM_TX_INSTANCE, + IFLA_BRIDGE_CFM_CC_CCM_TX_DMAC, + IFLA_BRIDGE_CFM_CC_CCM_TX_SEQ_NO_UPDATE, + IFLA_BRIDGE_CFM_CC_CCM_TX_PERIOD, + IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV, + IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV_VALUE, + IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV, + IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV_VALUE, + __IFLA_BRIDGE_CFM_CC_CCM_TX_MAX, +}; + +#define IFLA_BRIDGE_CFM_CC_CCM_TX_MAX (__IFLA_BRIDGE_CFM_CC_CCM_TX_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_MEP_STATUS_UNSPEC, + IFLA_BRIDGE_CFM_MEP_STATUS_INSTANCE, + IFLA_BRIDGE_CFM_MEP_STATUS_OPCODE_UNEXP_SEEN, + IFLA_BRIDGE_CFM_MEP_STATUS_VERSION_UNEXP_SEEN, + IFLA_BRIDGE_CFM_MEP_STATUS_RX_LEVEL_LOW_SEEN, + __IFLA_BRIDGE_CFM_MEP_STATUS_MAX, +}; + +#define IFLA_BRIDGE_CFM_MEP_STATUS_MAX (__IFLA_BRIDGE_CFM_MEP_STATUS_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_CC_PEER_STATUS_UNSPEC, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_INSTANCE, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_PEER_MEPID, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_CCM_DEFECT, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_RDI, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_PORT_TLV_VALUE, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_IF_TLV_VALUE, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEEN, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_TLV_SEEN, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEQ_UNEXP_SEEN, + __IFLA_BRIDGE_CFM_CC_PEER_STATUS_MAX, +}; + +#define IFLA_BRIDGE_CFM_CC_PEER_STATUS_MAX (__IFLA_BRIDGE_CFM_CC_PEER_STATUS_MAX - 1) + +enum { + IFLA_BRIDGE_MST_UNSPEC, + IFLA_BRIDGE_MST_ENTRY, + __IFLA_BRIDGE_MST_MAX, +}; +#define IFLA_BRIDGE_MST_MAX (__IFLA_BRIDGE_MST_MAX - 1) + +enum { + IFLA_BRIDGE_MST_ENTRY_UNSPEC, + IFLA_BRIDGE_MST_ENTRY_MSTI, + IFLA_BRIDGE_MST_ENTRY_STATE, + __IFLA_BRIDGE_MST_ENTRY_MAX, +}; +#define IFLA_BRIDGE_MST_ENTRY_MAX (__IFLA_BRIDGE_MST_ENTRY_MAX - 1) + struct bridge_stp_xstats { __u64 transition_blk; __u64 transition_fwd; @@ -354,16 +495,22 @@ enum { /* flags used in BRIDGE_VLANDB_DUMP_FLAGS attribute to affect dumps */ #define BRIDGE_VLANDB_DUMPF_STATS (1 << 0) /* Include stats in the dump */ +#define BRIDGE_VLANDB_DUMPF_GLOBAL (1 << 1) /* Dump global vlan options only */ /* Bridge vlan RTM attributes * [BRIDGE_VLANDB_ENTRY] = { * [BRIDGE_VLANDB_ENTRY_INFO] * ... * } + * [BRIDGE_VLANDB_GLOBAL_OPTIONS] = { + * [BRIDGE_VLANDB_GOPTS_ID] + * ... + * } */ enum { BRIDGE_VLANDB_UNSPEC, BRIDGE_VLANDB_ENTRY, + BRIDGE_VLANDB_GLOBAL_OPTIONS, __BRIDGE_VLANDB_MAX, }; #define BRIDGE_VLANDB_MAX (__BRIDGE_VLANDB_MAX - 1) @@ -375,6 +522,10 @@ enum { BRIDGE_VLANDB_ENTRY_STATE, BRIDGE_VLANDB_ENTRY_TUNNEL_INFO, BRIDGE_VLANDB_ENTRY_STATS, + BRIDGE_VLANDB_ENTRY_MCAST_ROUTER, + BRIDGE_VLANDB_ENTRY_MCAST_N_GROUPS, + BRIDGE_VLANDB_ENTRY_MCAST_MAX_GROUPS, + BRIDGE_VLANDB_ENTRY_NEIGH_SUPPRESS, __BRIDGE_VLANDB_ENTRY_MAX, }; #define BRIDGE_VLANDB_ENTRY_MAX (__BRIDGE_VLANDB_ENTRY_MAX - 1) @@ -413,6 +564,30 @@ enum { }; #define BRIDGE_VLANDB_STATS_MAX (__BRIDGE_VLANDB_STATS_MAX - 1) +enum { + BRIDGE_VLANDB_GOPTS_UNSPEC, + BRIDGE_VLANDB_GOPTS_ID, + BRIDGE_VLANDB_GOPTS_RANGE, + BRIDGE_VLANDB_GOPTS_MCAST_SNOOPING, + BRIDGE_VLANDB_GOPTS_MCAST_IGMP_VERSION, + BRIDGE_VLANDB_GOPTS_MCAST_MLD_VERSION, + BRIDGE_VLANDB_GOPTS_MCAST_LAST_MEMBER_CNT, + BRIDGE_VLANDB_GOPTS_MCAST_STARTUP_QUERY_CNT, + BRIDGE_VLANDB_GOPTS_MCAST_LAST_MEMBER_INTVL, + BRIDGE_VLANDB_GOPTS_PAD, + BRIDGE_VLANDB_GOPTS_MCAST_MEMBERSHIP_INTVL, + BRIDGE_VLANDB_GOPTS_MCAST_QUERIER_INTVL, + BRIDGE_VLANDB_GOPTS_MCAST_QUERY_INTVL, + BRIDGE_VLANDB_GOPTS_MCAST_QUERY_RESPONSE_INTVL, + BRIDGE_VLANDB_GOPTS_MCAST_STARTUP_QUERY_INTVL, + BRIDGE_VLANDB_GOPTS_MCAST_QUERIER, + BRIDGE_VLANDB_GOPTS_MCAST_ROUTER_PORTS, + BRIDGE_VLANDB_GOPTS_MCAST_QUERIER_STATE, + BRIDGE_VLANDB_GOPTS_MSTI, + __BRIDGE_VLANDB_GOPTS_MAX +}; +#define BRIDGE_VLANDB_GOPTS_MAX (__BRIDGE_VLANDB_GOPTS_MAX - 1) + /* Bridge multicast database attributes * [MDBA_MDB] = { * [MDBA_MDB_ENTRY] = { @@ -459,6 +634,11 @@ enum { MDBA_MDB_EATTR_GROUP_MODE, MDBA_MDB_EATTR_SOURCE, MDBA_MDB_EATTR_RTPROT, + MDBA_MDB_EATTR_DST, + MDBA_MDB_EATTR_DST_PORT, + MDBA_MDB_EATTR_VNI, + MDBA_MDB_EATTR_IFINDEX, + MDBA_MDB_EATTR_SRC_VNI, __MDBA_MDB_EATTR_MAX }; #define MDBA_MDB_EATTR_MAX (__MDBA_MDB_EATTR_MAX - 1) @@ -502,6 +682,9 @@ enum { MDBA_ROUTER_PATTR_UNSPEC, MDBA_ROUTER_PATTR_TIMER, MDBA_ROUTER_PATTR_TYPE, + MDBA_ROUTER_PATTR_INET_TIMER, + MDBA_ROUTER_PATTR_INET6_TIMER, + MDBA_ROUTER_PATTR_VID, __MDBA_ROUTER_PATTR_MAX }; #define MDBA_ROUTER_PATTR_MAX (__MDBA_ROUTER_PATTR_MAX - 1) @@ -526,6 +709,7 @@ struct br_mdb_entry { union { __be32 ip4; struct in6_addr ip6; + unsigned char mac_addr[ETH_ALEN]; } u; __be16 proto; } addr; @@ -547,10 +731,36 @@ enum { enum { MDBE_ATTR_UNSPEC, MDBE_ATTR_SOURCE, + MDBE_ATTR_SRC_LIST, + MDBE_ATTR_GROUP_MODE, + MDBE_ATTR_RTPROT, + MDBE_ATTR_DST, + MDBE_ATTR_DST_PORT, + MDBE_ATTR_VNI, + MDBE_ATTR_IFINDEX, + MDBE_ATTR_SRC_VNI, __MDBE_ATTR_MAX, }; #define MDBE_ATTR_MAX (__MDBE_ATTR_MAX - 1) +/* per mdb entry source */ +enum { + MDBE_SRC_LIST_UNSPEC, + MDBE_SRC_LIST_ENTRY, + __MDBE_SRC_LIST_MAX, +}; +#define MDBE_SRC_LIST_MAX (__MDBE_SRC_LIST_MAX - 1) + +/* per mdb entry per source attributes + * these are embedded in MDBE_SRC_LIST_ENTRY + */ +enum { + MDBE_SRCATTR_UNSPEC, + MDBE_SRCATTR_ADDRESS, + __MDBE_SRCATTR_MAX, +}; +#define MDBE_SRCATTR_MAX (__MDBE_SRCATTR_MAX - 1) + /* Embedded inside LINK_XSTATS_TYPE_BRIDGE */ enum { BRIDGE_XSTATS_UNSPEC, @@ -592,12 +802,15 @@ struct br_mcast_stats { /* bridge boolean options * BR_BOOLOPT_NO_LL_LEARN - disable learning from link-local packets + * BR_BOOLOPT_MCAST_VLAN_SNOOPING - control vlan multicast snooping * * IMPORTANT: if adding a new option do not forget to handle * it in br_boolopt_toggle/get and bridge sysfs */ enum br_boolopt_id { BR_BOOLOPT_NO_LL_LEARN, + BR_BOOLOPT_MCAST_VLAN_SNOOPING, + BR_BOOLOPT_MST_ENABLE, BR_BOOLOPT_MAX }; @@ -610,4 +823,17 @@ struct br_boolopt_multi { __u32 optval; __u32 optmask; }; + +enum { + BRIDGE_QUERIER_UNSPEC, + BRIDGE_QUERIER_IP_ADDRESS, + BRIDGE_QUERIER_IP_PORT, + BRIDGE_QUERIER_IP_OTHER_TIMER, + BRIDGE_QUERIER_PAD, + BRIDGE_QUERIER_IPV6_ADDRESS, + BRIDGE_QUERIER_IPV6_PORT, + BRIDGE_QUERIER_IPV6_OTHER_TIMER, + __BRIDGE_QUERIER_MAX +}; +#define BRIDGE_QUERIER_MAX (__BRIDGE_QUERIER_MAX - 1) #endif /* _LINUX_IF_BRIDGE_H */ diff --git a/linux-headers/include/linux/if_ether.h b/linux-headers/include/linux/if_ether.h index 1a0c7dfe8e3..a1aff8e3379 100644 --- a/linux-headers/include/linux/if_ether.h +++ b/linux-headers/include/linux/if_ether.h @@ -86,7 +86,10 @@ * over Ethernet */ #define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */ +#define ETH_P_PROFINET 0x8892 /* PROFINET */ +#define ETH_P_REALTEK 0x8899 /* Multiple proprietary protocols */ #define ETH_P_AOE 0x88A2 /* ATA over Ethernet */ +#define ETH_P_ETHERCAT 0x88A4 /* EtherCAT */ #define ETH_P_8021AD 0x88A8 /* 802.1ad Service VLAN */ #define ETH_P_802_EX1 0x88B5 /* 802.1 Local Experimental 1. */ #define ETH_P_PREAUTH 0x88C7 /* 802.11 Preauthentication */ @@ -99,6 +102,7 @@ #define ETH_P_1588 0x88F7 /* IEEE 1588 Timesync */ #define ETH_P_NCSI 0x88F8 /* NCSI protocol */ #define ETH_P_PRP 0x88FB /* IEC 62439-3 PRP/HSRv0 */ +#define ETH_P_CFM 0x8902 /* Connectivity Fault Management */ #define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */ #define ETH_P_IBOE 0x8915 /* Infiniband over Ethernet */ #define ETH_P_TDLS 0x890D /* TDLS */ @@ -112,10 +116,11 @@ #define ETH_P_QINQ3 0x9300 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_DSA_8021Q 0xDADB /* Fake VLAN Header for DSA [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_DSA_A5PSW 0xE001 /* A5PSW Tag Value [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_IFE 0xED3E /* ForCES inter-FE LFB type */ #define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */ -#define ETH_P_802_3_MIN 0x0600 /* If the value in the ethernet type is less than this value +#define ETH_P_802_3_MIN 0x0600 /* If the value in the ethernet type is more than this value * then the frame is Ethernet II. Else it is 802.3 */ /* @@ -133,6 +138,7 @@ #define ETH_P_LOCALTALK 0x0009 /* Localtalk pseudo type */ #define ETH_P_CAN 0x000C /* CAN: Controller Area Network */ #define ETH_P_CANFD 0x000D /* CANFD: CAN flexible data rate*/ +#define ETH_P_CANXL 0x000E /* CANXL: eXtended frame Length */ #define ETH_P_PPPTALK 0x0010 /* Dummy type for Atalk over PPP*/ #define ETH_P_TR_802_2 0x0011 /* 802.2 frames */ #define ETH_P_MOBITEX 0x0015 /* Mobitex (kaz@cafe.net) */ @@ -150,6 +156,9 @@ #define ETH_P_MAP 0x00F9 /* Qualcomm multiplexing and * aggregation protocol */ +#define ETH_P_MCTP 0x00FA /* Management component transport + * protocol packets + */ /* * This is an Ethernet frame header. diff --git a/linux-headers/include/linux/if_fddi.h b/linux-headers/include/linux/if_fddi.h index 7d63811ff8a..801943913dd 100644 --- a/linux-headers/include/linux/if_fddi.h +++ b/linux-headers/include/linux/if_fddi.h @@ -9,7 +9,7 @@ * Version: @(#)if_fddi.h 1.0.3 Oct 6 2018 * * Author: Lawrence V. Stefani, - * Maintainer: Maciej W. Rozycki, + * Maintainer: Maciej W. Rozycki, * * if_fddi.h is based on previous if_ether.h and if_tr.h work by * Fred N. van Kempen, diff --git a/linux-headers/include/linux/if_frad.h b/linux-headers/include/linux/if_frad.h deleted file mode 100644 index baf099a792a..00000000000 --- a/linux-headers/include/linux/if_frad.h +++ /dev/null @@ -1,123 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ -/* - * DLCI/FRAD Definitions for Frame Relay Access Devices. DLCI devices are - * created for each DLCI associated with a FRAD. The FRAD driver - * is not truly a network device, but the lower level device - * handler. This allows other FRAD manufacturers to use the DLCI - * code, including its RFC1490 encapsulation alongside the current - * implementation for the Sangoma cards. - * - * Version: @(#)if_ifrad.h 0.15 31 Mar 96 - * - * Author: Mike McLagan - * - * Changes: - * 0.15 Mike McLagan changed structure defs (packed) - * re-arranged flags - * added DLCI_RET vars - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _FRAD_H_ -#define _FRAD_H_ - -#include - -/* Structures and constants associated with the DLCI device driver */ - -struct dlci_add -{ - char devname[IFNAMSIZ]; - short dlci; -}; - -#define DLCI_GET_CONF (SIOCDEVPRIVATE + 2) -#define DLCI_SET_CONF (SIOCDEVPRIVATE + 3) - -/* - * These are related to the Sangoma SDLA and should remain in order. - * Code within the SDLA module is based on the specifics of this - * structure. Change at your own peril. - */ -struct dlci_conf { - short flags; - short CIR_fwd; - short Bc_fwd; - short Be_fwd; - short CIR_bwd; - short Bc_bwd; - short Be_bwd; - -/* these are part of the status read */ - short Tc_fwd; - short Tc_bwd; - short Tf_max; - short Tb_max; - -/* add any new fields here above is a mirror of sdla_dlci_conf */ -}; - -#define DLCI_GET_SLAVE (SIOCDEVPRIVATE + 4) - -/* configuration flags for DLCI */ -#define DLCI_IGNORE_CIR_OUT 0x0001 -#define DLCI_ACCOUNT_CIR_IN 0x0002 -#define DLCI_BUFFER_IF 0x0008 - -#define DLCI_VALID_FLAGS 0x000B - -/* defines for the actual Frame Relay hardware */ -#define FRAD_GET_CONF (SIOCDEVPRIVATE) -#define FRAD_SET_CONF (SIOCDEVPRIVATE + 1) - -#define FRAD_LAST_IOCTL FRAD_SET_CONF - -/* - * Based on the setup for the Sangoma SDLA. If changes are - * necessary to this structure, a routine will need to be - * added to that module to copy fields. - */ -struct frad_conf -{ - short station; - short flags; - short kbaud; - short clocking; - short mtu; - short T391; - short T392; - short N391; - short N392; - short N393; - short CIR_fwd; - short Bc_fwd; - short Be_fwd; - short CIR_bwd; - short Bc_bwd; - short Be_bwd; - -/* Add new fields here, above is a mirror of the sdla_conf */ - -}; - -#define FRAD_STATION_CPE 0x0000 -#define FRAD_STATION_NODE 0x0001 - -#define FRAD_TX_IGNORE_CIR 0x0001 -#define FRAD_RX_ACCOUNT_CIR 0x0002 -#define FRAD_DROP_ABORTED 0x0004 -#define FRAD_BUFFERIF 0x0008 -#define FRAD_STATS 0x0010 -#define FRAD_MCI 0x0100 -#define FRAD_AUTODLCI 0x8000 -#define FRAD_VALID_FLAGS 0x811F - -#define FRAD_CLOCK_INT 0x0001 -#define FRAD_CLOCK_EXT 0x0000 - - -#endif /* _FRAD_H_ */ diff --git a/linux-headers/include/linux/if_link.h b/linux-headers/include/linux/if_link.h index 307e5c245e9..c2ca7a6add0 100644 --- a/linux-headers/include/linux/if_link.h +++ b/linux-headers/include/linux/if_link.h @@ -75,8 +75,9 @@ struct rtnl_link_stats { * * @rx_dropped: Number of packets received but not processed, * e.g. due to lack of resources or unsupported protocol. - * For hardware interfaces this counter should not include packets - * dropped by the device which are counted separately in + * For hardware interfaces this counter may include packets discarded + * due to L2 address filtering but should not include packets dropped + * by the device due to buffer exhaustion which are counted separately in * @rx_missed_errors (since procfs folds those two counters together). * * @tx_dropped: Number of packets dropped on their way to transmission, @@ -210,6 +211,9 @@ struct rtnl_link_stats { * @rx_nohandler: Number of packets received on the interface * but dropped by the networking stack because the device is * not designated to receive packets (e.g. backup link in a bond). + * + * @rx_otherhost_dropped: Number of packets dropped due to mismatch + * in destination MAC address. */ struct rtnl_link_stats64 { __u64 rx_packets; @@ -242,6 +246,23 @@ struct rtnl_link_stats64 { __u64 rx_compressed; __u64 tx_compressed; __u64 rx_nohandler; + + __u64 rx_otherhost_dropped; +}; + +/* Subset of link stats useful for in-HW collection. Meaning of the fields is as + * for struct rtnl_link_stats64. + */ +struct rtnl_hw_stats64 { + __u64 rx_packets; + __u64 tx_packets; + __u64 rx_bytes; + __u64 tx_bytes; + __u64 rx_errors; + __u64 tx_errors; + __u64 rx_dropped; + __u64 tx_dropped; + __u64 multicast; }; /* The struct should be in sync with struct ifmap */ @@ -340,6 +361,22 @@ enum { IFLA_ALT_IFNAME, /* Alternative ifname */ IFLA_PERM_ADDRESS, IFLA_PROTO_DOWN_REASON, + + /* device (sysfs) name as parent, used instead + * of IFLA_LINK where there's no parent netdev + */ + IFLA_PARENT_DEV_NAME, + IFLA_PARENT_DEV_BUS_NAME, + IFLA_GRO_MAX_SIZE, + IFLA_TSO_MAX_SIZE, + IFLA_TSO_MAX_SEGS, + IFLA_ALLMULTI, /* Allmulti count: > 0 means acts ALLMULTI */ + + IFLA_DEVLINK_PORT, + + IFLA_GSO_IPV4_MAX_SIZE, + IFLA_GRO_IPV4_MAX_SIZE, + __IFLA_MAX }; @@ -407,6 +444,7 @@ enum { IFLA_INET6_ICMP6STATS, /* statistics (icmpv6) */ IFLA_INET6_TOKEN, /* device token */ IFLA_INET6_ADDR_GEN_MODE, /* implicit address generator mode */ + IFLA_INET6_RA_MTU, /* mtu carried in the RA message */ __IFLA_INET6_MAX }; @@ -469,6 +507,7 @@ enum { IFLA_BR_MCAST_MLD_VERSION, IFLA_BR_VLAN_STATS_PER_PORT, IFLA_BR_MULTI_BOOLOPT, + IFLA_BR_MCAST_QUERIER_STATE, __IFLA_BR_MAX, }; @@ -522,6 +561,14 @@ enum { IFLA_BRPORT_BACKUP_PORT, IFLA_BRPORT_MRP_RING_OPEN, IFLA_BRPORT_MRP_IN_OPEN, + IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT, + IFLA_BRPORT_MCAST_EHT_HOSTS_CNT, + IFLA_BRPORT_LOCKED, + IFLA_BRPORT_MAB, + IFLA_BRPORT_MCAST_N_GROUPS, + IFLA_BRPORT_MCAST_MAX_GROUPS, + IFLA_BRPORT_NEIGH_VLAN_SUPPRESS, + IFLA_BRPORT_BACKUP_NHID, __IFLA_BRPORT_MAX }; #define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1) @@ -586,6 +633,9 @@ enum { IFLA_MACVLAN_MACADDR, IFLA_MACVLAN_MACADDR_DATA, IFLA_MACVLAN_MACADDR_COUNT, + IFLA_MACVLAN_BC_QUEUE_LEN, + IFLA_MACVLAN_BC_QUEUE_LEN_USED, + IFLA_MACVLAN_BC_CUTOFF, __IFLA_MACVLAN_MAX, }; @@ -607,6 +657,7 @@ enum macvlan_macaddr_mode { }; #define MACVLAN_FLAG_NOPROMISC 1 +#define MACVLAN_FLAG_NODST 2 /* skip dst macvlan if matching src macvlan */ /* VRF section */ enum { @@ -653,6 +704,7 @@ enum { IFLA_XFRM_UNSPEC, IFLA_XFRM_LINK, IFLA_XFRM_IF_ID, + IFLA_XFRM_COLLECT_METADATA, __IFLA_XFRM_MAX }; @@ -694,7 +746,55 @@ enum ipvlan_mode { #define IPVLAN_F_PRIVATE 0x01 #define IPVLAN_F_VEPA 0x02 +/* Tunnel RTM header */ +struct tunnel_msg { + __u8 family; + __u8 flags; + __u16 reserved2; + __u32 ifindex; +}; + /* VXLAN section */ + +/* include statistics in the dump */ +#define TUNNEL_MSG_FLAG_STATS 0x01 + +#define TUNNEL_MSG_VALID_USER_FLAGS TUNNEL_MSG_FLAG_STATS + +/* Embedded inside VXLAN_VNIFILTER_ENTRY_STATS */ +enum { + VNIFILTER_ENTRY_STATS_UNSPEC, + VNIFILTER_ENTRY_STATS_RX_BYTES, + VNIFILTER_ENTRY_STATS_RX_PKTS, + VNIFILTER_ENTRY_STATS_RX_DROPS, + VNIFILTER_ENTRY_STATS_RX_ERRORS, + VNIFILTER_ENTRY_STATS_TX_BYTES, + VNIFILTER_ENTRY_STATS_TX_PKTS, + VNIFILTER_ENTRY_STATS_TX_DROPS, + VNIFILTER_ENTRY_STATS_TX_ERRORS, + VNIFILTER_ENTRY_STATS_PAD, + __VNIFILTER_ENTRY_STATS_MAX +}; +#define VNIFILTER_ENTRY_STATS_MAX (__VNIFILTER_ENTRY_STATS_MAX - 1) + +enum { + VXLAN_VNIFILTER_ENTRY_UNSPEC, + VXLAN_VNIFILTER_ENTRY_START, + VXLAN_VNIFILTER_ENTRY_END, + VXLAN_VNIFILTER_ENTRY_GROUP, + VXLAN_VNIFILTER_ENTRY_GROUP6, + VXLAN_VNIFILTER_ENTRY_STATS, + __VXLAN_VNIFILTER_ENTRY_MAX +}; +#define VXLAN_VNIFILTER_ENTRY_MAX (__VXLAN_VNIFILTER_ENTRY_MAX - 1) + +enum { + VXLAN_VNIFILTER_UNSPEC, + VXLAN_VNIFILTER_ENTRY, + __VXLAN_VNIFILTER_MAX +}; +#define VXLAN_VNIFILTER_MAX (__VXLAN_VNIFILTER_MAX - 1) + enum { IFLA_VXLAN_UNSPEC, IFLA_VXLAN_ID, @@ -726,6 +826,8 @@ enum { IFLA_VXLAN_GPE, IFLA_VXLAN_TTL_INHERIT, IFLA_VXLAN_DF, + IFLA_VXLAN_VNIFILTER, /* only applicable with COLLECT_METADATA mode */ + IFLA_VXLAN_LOCALBYPASS, __IFLA_VXLAN_MAX }; #define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1) @@ -759,6 +861,7 @@ enum { IFLA_GENEVE_LABEL, IFLA_GENEVE_TTL_INHERIT, IFLA_GENEVE_DF, + IFLA_GENEVE_INNER_PROTO_INHERIT, __IFLA_GENEVE_MAX }; #define IFLA_GENEVE_MAX (__IFLA_GENEVE_MAX - 1) @@ -804,6 +907,8 @@ enum { IFLA_GTP_FD1, IFLA_GTP_PDP_HASHSIZE, IFLA_GTP_ROLE, + IFLA_GTP_CREATE_SOCKETS, + IFLA_GTP_RESTART_COUNT, __IFLA_GTP_MAX, }; #define IFLA_GTP_MAX (__IFLA_GTP_MAX - 1) @@ -840,6 +945,9 @@ enum { IFLA_BOND_AD_ACTOR_SYSTEM, IFLA_BOND_TLB_DYNAMIC_LB, IFLA_BOND_PEER_NOTIF_DELAY, + IFLA_BOND_AD_LACP_ACTIVE, + IFLA_BOND_MISSED_MAX, + IFLA_BOND_NS_IP6_TARGET, __IFLA_BOND_MAX, }; @@ -867,6 +975,7 @@ enum { IFLA_BOND_SLAVE_AD_AGGREGATOR_ID, IFLA_BOND_SLAVE_AD_ACTOR_OPER_PORT_STATE, IFLA_BOND_SLAVE_AD_PARTNER_OPER_PORT_STATE, + IFLA_BOND_SLAVE_PRIO, __IFLA_BOND_SLAVE_MAX, }; @@ -1136,6 +1245,17 @@ enum { #define IFLA_STATS_FILTER_BIT(ATTR) (1 << (ATTR - 1)) +enum { + IFLA_STATS_GETSET_UNSPEC, + IFLA_STATS_GET_FILTERS, /* Nest of IFLA_STATS_LINK_xxx, each a u32 with + * a filter mask for the corresponding group. + */ + IFLA_STATS_SET_OFFLOAD_XSTATS_L3_STATS, /* 0 or 1 as u8 */ + __IFLA_STATS_GETSET_MAX, +}; + +#define IFLA_STATS_GETSET_MAX (__IFLA_STATS_GETSET_MAX - 1) + /* These are embedded into IFLA_STATS_LINK_XSTATS: * [IFLA_STATS_LINK_XSTATS] * -> [LINK_XSTATS_TYPE_xxx] @@ -1153,10 +1273,21 @@ enum { enum { IFLA_OFFLOAD_XSTATS_UNSPEC, IFLA_OFFLOAD_XSTATS_CPU_HIT, /* struct rtnl_link_stats64 */ + IFLA_OFFLOAD_XSTATS_HW_S_INFO, /* HW stats info. A nest */ + IFLA_OFFLOAD_XSTATS_L3_STATS, /* struct rtnl_hw_stats64 */ __IFLA_OFFLOAD_XSTATS_MAX }; #define IFLA_OFFLOAD_XSTATS_MAX (__IFLA_OFFLOAD_XSTATS_MAX - 1) +enum { + IFLA_OFFLOAD_XSTATS_HW_S_INFO_UNSPEC, + IFLA_OFFLOAD_XSTATS_HW_S_INFO_REQUEST, /* u8 */ + IFLA_OFFLOAD_XSTATS_HW_S_INFO_USED, /* u8 */ + __IFLA_OFFLOAD_XSTATS_HW_S_INFO_MAX, +}; +#define IFLA_OFFLOAD_XSTATS_HW_S_INFO_MAX \ + (__IFLA_OFFLOAD_XSTATS_HW_S_INFO_MAX - 1) + /* XDP section */ #define XDP_FLAGS_UPDATE_IF_NOEXIST (1U << 0) @@ -1228,6 +1359,8 @@ enum { #define RMNET_FLAGS_INGRESS_MAP_COMMANDS (1U << 1) #define RMNET_FLAGS_INGRESS_MAP_CKSUMV4 (1U << 2) #define RMNET_FLAGS_EGRESS_MAP_CKSUMV4 (1U << 3) +#define RMNET_FLAGS_INGRESS_MAP_CKSUMV5 (1U << 4) +#define RMNET_FLAGS_EGRESS_MAP_CKSUMV5 (1U << 5) enum { IFLA_RMNET_UNSPEC, @@ -1243,4 +1376,24 @@ struct ifla_rmnet_flags { __u32 mask; }; +/* MCTP section */ + +enum { + IFLA_MCTP_UNSPEC, + IFLA_MCTP_NET, + __IFLA_MCTP_MAX, +}; + +#define IFLA_MCTP_MAX (__IFLA_MCTP_MAX - 1) + +/* DSA section */ + +enum { + IFLA_DSA_UNSPEC, + IFLA_DSA_MASTER, + __IFLA_DSA_MAX, +}; + +#define IFLA_DSA_MAX (__IFLA_DSA_MAX - 1) + #endif /* _LINUX_IF_LINK_H */ diff --git a/linux-headers/include/linux/if_macsec.h b/linux-headers/include/linux/if_macsec.h index eee31cec76d..6edfea0a17a 100644 --- a/linux-headers/include/linux/if_macsec.h +++ b/linux-headers/include/linux/if_macsec.h @@ -22,6 +22,8 @@ #define MACSEC_KEYID_LEN 16 +#define MACSEC_SALT_LEN 12 + /* cipher IDs as per IEEE802.1AE-2018 (Table 14-1) */ #define MACSEC_CIPHER_ID_GCM_AES_128 0x0080C20001000001ULL #define MACSEC_CIPHER_ID_GCM_AES_256 0x0080C20001000002ULL diff --git a/linux-headers/include/linux/if_packet.h b/linux-headers/include/linux/if_packet.h index 3d884d68eb3..9efc42382fd 100644 --- a/linux-headers/include/linux/if_packet.h +++ b/linux-headers/include/linux/if_packet.h @@ -2,6 +2,7 @@ #ifndef __LINUX_IF_PACKET_H #define __LINUX_IF_PACKET_H +#include #include struct sockaddr_pkt { @@ -58,6 +59,7 @@ struct sockaddr_ll { #define PACKET_ROLLOVER_STATS 21 #define PACKET_FANOUT_DATA 22 #define PACKET_IGNORE_OUTGOING 23 +#define PACKET_VNET_HDR_SZ 24 #define PACKET_FANOUT_HASH 0 #define PACKET_FANOUT_LB 1 @@ -69,6 +71,7 @@ struct sockaddr_ll { #define PACKET_FANOUT_EBPF 7 #define PACKET_FANOUT_FLAG_ROLLOVER 0x1000 #define PACKET_FANOUT_FLAG_UNIQUEID 0x2000 +#define PACKET_FANOUT_FLAG_IGNORE_OUTGOING 0x4000 #define PACKET_FANOUT_FLAG_DEFRAG 0x8000 struct tpacket_stats { @@ -113,6 +116,7 @@ struct tpacket_auxdata { #define TP_STATUS_BLK_TMO (1 << 5) #define TP_STATUS_VLAN_TPID_VALID (1 << 6) /* auxdata has valid tp_vlan_tpid */ #define TP_STATUS_CSUM_VALID (1 << 7) +#define TP_STATUS_GSO_TCP (1 << 8) /* Tx ring - header status */ #define TP_STATUS_AVAILABLE 0 @@ -296,6 +300,17 @@ struct packet_mreq { unsigned char mr_address[8]; }; +struct fanout_args { +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u16 id; + __u16 type_flags; +#else + __u16 type_flags; + __u16 id; +#endif + __u32 max_num_members; +}; + #define PACKET_MR_MULTICAST 0 #define PACKET_MR_PROMISC 1 #define PACKET_MR_ALLMULTI 2 diff --git a/linux-headers/include/linux/if_pppox.h b/linux-headers/include/linux/if_pppox.h index 324bcc4c372..f76a68b1202 100644 --- a/linux-headers/include/linux/if_pppox.h +++ b/linux-headers/include/linux/if_pppox.h @@ -122,7 +122,7 @@ struct sockaddr_pppol2tpv3in6 { struct pppoe_tag { __be16 tag_type; __be16 tag_len; - char tag_data[0]; + char tag_data[]; } __attribute__ ((packed)); /* Tag identifiers */ @@ -150,7 +150,7 @@ struct pppoe_hdr { __u8 code; __be16 sid; __be16 length; - struct pppoe_tag tag[0]; + struct pppoe_tag tag[]; } __attribute__((packed)); /* Length of entire PPPoE + PPP header */ diff --git a/linux-headers/include/linux/if_tun.h b/linux-headers/include/linux/if_tun.h index 8489ae03744..8a6d5d41b82 100644 --- a/linux-headers/include/linux/if_tun.h +++ b/linux-headers/include/linux/if_tun.h @@ -67,6 +67,8 @@ #define IFF_TAP 0x0002 #define IFF_NAPI 0x0010 #define IFF_NAPI_FRAGS 0x0020 +/* Used in TUNSETIFF to bring up tun/tap without carrier */ +#define IFF_NO_CARRIER 0x0040 #define IFF_NO_PI 0x1000 /* This flag has no real effect */ #define IFF_ONE_QUEUE 0x2000 @@ -88,6 +90,8 @@ #define TUN_F_TSO6 0x04 /* I can handle TSO for IPv6 packets */ #define TUN_F_TSO_ECN 0x08 /* I can handle TSO with ECN bits. */ #define TUN_F_UFO 0x10 /* I can handle UFO packets */ +#define TUN_F_USO4 0x20 /* I can handle USO for IPv4 packets */ +#define TUN_F_USO6 0x40 /* I can handle USO for IPv6 packets */ /* Protocol info prepended to the packets (when IFF_NO_PI is not set) */ #define TUN_PKT_STRIP 0x0001 @@ -108,7 +112,7 @@ struct tun_pi { struct tun_filter { __u16 flags; /* TUN_FLT_ flags see above */ __u16 count; /* Number of addresses */ - __u8 addr[0][ETH_ALEN]; + __u8 addr[][ETH_ALEN]; }; #endif /* __IF_TUN_H */ diff --git a/linux-headers/include/linux/if_tunnel.h b/linux-headers/include/linux/if_tunnel.h index c7f0a5e6adf..edaea41cc38 100644 --- a/linux-headers/include/linux/if_tunnel.h +++ b/linux-headers/include/linux/if_tunnel.h @@ -176,8 +176,10 @@ enum { #define TUNNEL_VXLAN_OPT __cpu_to_be16(0x1000) #define TUNNEL_NOCACHE __cpu_to_be16(0x2000) #define TUNNEL_ERSPAN_OPT __cpu_to_be16(0x4000) +#define TUNNEL_GTP_OPT __cpu_to_be16(0x8000) #define TUNNEL_OPTIONS_PRESENT \ - (TUNNEL_GENEVE_OPT | TUNNEL_VXLAN_OPT | TUNNEL_ERSPAN_OPT) + (TUNNEL_GENEVE_OPT | TUNNEL_VXLAN_OPT | TUNNEL_ERSPAN_OPT | \ + TUNNEL_GTP_OPT) #endif /* _IF_TUNNEL_H_ */ diff --git a/linux-headers/include/linux/if_xdp.h b/linux-headers/include/linux/if_xdp.h index a78a8096f4c..8d48863472b 100644 --- a/linux-headers/include/linux/if_xdp.h +++ b/linux-headers/include/linux/if_xdp.h @@ -25,6 +25,12 @@ * application. */ #define XDP_USE_NEED_WAKEUP (1 << 3) +/* By setting this option, userspace application indicates that it can + * handle multiple descriptors per packet thus enabling AF_XDP to split + * multi-buffer XDP frames into multiple Rx descriptors. Without this set + * such frames will be dropped. + */ +#define XDP_USE_SG (1 << 4) /* Flags for xsk_umem_config flags */ #define XDP_UMEM_UNALIGNED_CHUNK_FLAG (1 << 0) @@ -108,4 +114,11 @@ struct xdp_desc { /* UMEM descriptor is __u64 */ +/* Flag indicating that the packet continues with the buffer pointed out by the + * next frame in the ring. The end of the packet is signalled by setting this + * bit to zero. For single buffer packets, every descriptor has 'options' set + * to 0 and this maintains backward compatibility. + */ +#define XDP_PKT_CONTD (1 << 0) + #endif /* _LINUX_IF_XDP_H */ diff --git a/linux-headers/include/linux/igmp.h b/linux-headers/include/linux/igmp.h index 06cce26a276..8ce306e4da0 100644 --- a/linux-headers/include/linux/igmp.h +++ b/linux-headers/include/linux/igmp.h @@ -48,7 +48,7 @@ struct igmpv3_grec { __u8 grec_auxwords; __be16 grec_nsrcs; __be32 grec_mca; - __be32 grec_src[0]; + __be32 grec_src[]; }; struct igmpv3_report { @@ -57,7 +57,7 @@ struct igmpv3_report { __sum16 csum; __be16 resv2; __be16 ngrec; - struct igmpv3_grec grec[0]; + struct igmpv3_grec grec[]; }; struct igmpv3_query { @@ -78,7 +78,7 @@ struct igmpv3_query { #endif __u8 qqic; __be16 nsrcs; - __be32 srcs[0]; + __be32 srcs[]; }; #define IGMP_HOST_MEMBERSHIP_QUERY 0x11 /* From RFC1112 */ diff --git a/linux-headers/include/linux/iio/buffer.h b/linux-headers/include/linux/iio/buffer.h new file mode 100644 index 00000000000..e0781622e13 --- /dev/null +++ b/linux-headers/include/linux/iio/buffer.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* industrial I/O buffer definitions needed both in and out of kernel + */ + +#ifndef _IIO_BUFFER_H_ +#define _IIO_BUFFER_H_ + +#define IIO_BUFFER_GET_FD_IOCTL _IOWR('i', 0x91, int) + +#endif /* _IIO_BUFFER_H_ */ diff --git a/linux-headers/include/linux/iio/types.h b/linux-headers/include/linux/iio/types.h index c6adaab9e6f..348a41d7323 100644 --- a/linux-headers/include/linux/iio/types.h +++ b/linux-headers/include/linux/iio/types.h @@ -95,6 +95,12 @@ enum iio_modifier { IIO_MOD_ETHANOL, IIO_MOD_H2, IIO_MOD_O2, + IIO_MOD_LINEAR_X, + IIO_MOD_LINEAR_Y, + IIO_MOD_LINEAR_Z, + IIO_MOD_PITCH, + IIO_MOD_YAW, + IIO_MOD_ROLL, }; enum iio_event_type { @@ -104,6 +110,8 @@ enum iio_event_type { IIO_EV_TYPE_THRESH_ADAPTIVE, IIO_EV_TYPE_MAG_ADAPTIVE, IIO_EV_TYPE_CHANGE, + IIO_EV_TYPE_MAG_REFERENCED, + IIO_EV_TYPE_GESTURE, }; enum iio_event_direction { @@ -111,7 +119,8 @@ enum iio_event_direction { IIO_EV_DIR_RISING, IIO_EV_DIR_FALLING, IIO_EV_DIR_NONE, + IIO_EV_DIR_SINGLETAP, + IIO_EV_DIR_DOUBLETAP, }; #endif /* _IIO_TYPES_H_ */ - diff --git a/linux-headers/include/linux/in.h b/linux-headers/include/linux/in.h index 32cf55c84ff..7bdd6843c01 100644 --- a/linux-headers/include/linux/in.h +++ b/linux-headers/include/linux/in.h @@ -20,6 +20,7 @@ #define _LINUX_IN_H #include +#include #include #include @@ -68,6 +69,8 @@ enum { #define IPPROTO_PIM IPPROTO_PIM IPPROTO_COMP = 108, /* Compression Header Protocol */ #define IPPROTO_COMP IPPROTO_COMP + IPPROTO_L2TP = 115, /* Layer 2 Tunnelling Protocol */ +#define IPPROTO_L2TP IPPROTO_L2TP IPPROTO_SCTP = 132, /* Stream Control Transport Protocol */ #define IPPROTO_SCTP IPPROTO_SCTP IPPROTO_UDPLITE = 136, /* UDP-Lite (RFC 3828) */ @@ -159,6 +162,8 @@ struct in_addr { #define MCAST_MSFILTER 48 #define IP_MULTICAST_ALL 49 #define IP_UNICAST_IF 50 +#define IP_LOCAL_PORT_RANGE 51 +#define IP_PROTOCOL 52 #define MCAST_EXCLUDE 0 #define MCAST_INCLUDE 1 @@ -192,7 +197,10 @@ struct ip_msfilter { __be32 imsf_interface; __u32 imsf_fmode; __u32 imsf_numsrc; - __be32 imsf_slist[1]; + union { + __be32 imsf_slist[1]; + __DECLARE_FLEX_ARRAY(__be32, imsf_slist_flex); + }; }; #define IP_MSFILTER_SIZE(numsrc) \ @@ -211,11 +219,22 @@ struct group_source_req { }; struct group_filter { - __u32 gf_interface; /* interface index */ - struct __kernel_sockaddr_storage gf_group; /* multicast address */ - __u32 gf_fmode; /* filter mode */ - __u32 gf_numsrc; /* number of sources */ - struct __kernel_sockaddr_storage gf_slist[1]; /* interface index */ + union { + struct { + __u32 gf_interface_aux; /* interface index */ + struct __kernel_sockaddr_storage gf_group_aux; /* multicast address */ + __u32 gf_fmode_aux; /* filter mode */ + __u32 gf_numsrc_aux; /* number of sources */ + struct __kernel_sockaddr_storage gf_slist[1]; /* interface index */ + }; + struct { + __u32 gf_interface; /* interface index */ + struct __kernel_sockaddr_storage gf_group; /* multicast address */ + __u32 gf_fmode; /* filter mode */ + __u32 gf_numsrc; /* number of sources */ + struct __kernel_sockaddr_storage gf_slist_flex[]; /* interface index */ + }; + }; }; #define GROUP_FILTER_SIZE(numsrc) \ @@ -289,6 +308,9 @@ struct sockaddr_in { /* Address indicating an error return. */ #define INADDR_NONE ((unsigned long int) 0xffffffff) +/* Dummy address for src of ICMP replies if no real address is set (RFC7600). */ +#define INADDR_DUMMY ((unsigned long int) 0xc0000008) + /* Network number for local host loopback. */ #define IN_LOOPBACKNET 127 diff --git a/linux-headers/include/linux/in6.h b/linux-headers/include/linux/in6.h index 7e3a58e6040..a17363e043b 100644 --- a/linux-headers/include/linux/in6.h +++ b/linux-headers/include/linux/in6.h @@ -145,6 +145,7 @@ struct in6_flowlabel_req { #define IPV6_TLV_PADN 1 #define IPV6_TLV_ROUTERALERT 5 #define IPV6_TLV_CALIPSO 7 /* RFC 5570 */ +#define IPV6_TLV_IOAM 49 /* TEMPORARY IANA allocation for IOAM */ #define IPV6_TLV_JUMBO 194 #define IPV6_TLV_HAO 201 /* home address option */ diff --git a/linux-headers/include/linux/inet_diag.h b/linux-headers/include/linux/inet_diag.h index ed1c3153b4f..d81cb69a26a 100644 --- a/linux-headers/include/linux/inet_diag.h +++ b/linux-headers/include/linux/inet_diag.h @@ -104,7 +104,7 @@ struct inet_diag_hostcond { __u8 family; __u8 prefix_len; int port; - __be32 addr[0]; + __be32 addr[]; }; struct inet_diag_markcond { diff --git a/linux-headers/include/linux/inotify.h b/linux-headers/include/linux/inotify.h index cd00c1b2f34..fed4155d6a3 100644 --- a/linux-headers/include/linux/inotify.h +++ b/linux-headers/include/linux/inotify.h @@ -23,7 +23,7 @@ struct inotify_event { __u32 mask; /* watch mask */ __u32 cookie; /* cookie to synchronize two events */ __u32 len; /* length (including nulls) of name */ - char name[0]; /* stub for possible name */ + char name[]; /* stub for possible name */ }; /* the following are legal, implemented events that user-space can watch for */ diff --git a/linux-headers/include/linux/input-event-codes.h b/linux-headers/include/linux/input-event-codes.h index 0084c3b86a4..c46be93da08 100644 --- a/linux-headers/include/linux/input-event-codes.h +++ b/linux-headers/include/linux/input-event-codes.h @@ -278,7 +278,8 @@ #define KEY_PAUSECD 201 #define KEY_PROG3 202 #define KEY_PROG4 203 -#define KEY_DASHBOARD 204 /* AL Dashboard */ +#define KEY_ALL_APPLICATIONS 204 /* AC Desktop Show All Applications */ +#define KEY_DASHBOARD KEY_ALL_APPLICATIONS #define KEY_SUSPEND 205 #define KEY_CLOSE 206 /* AC Close */ #define KEY_PLAY 207 @@ -611,6 +612,11 @@ #define KEY_VOICECOMMAND 0x246 /* Listening Voice Command */ #define KEY_ASSISTANT 0x247 /* AL Context-aware desktop assistant */ #define KEY_KBD_LAYOUT_NEXT 0x248 /* AC Next Keyboard Layout Select */ +#define KEY_EMOJI_PICKER 0x249 /* Show/hide emoji picker (HUTRR101) */ +#define KEY_DICTATE 0x24a /* Start or Stop Voice Dictation Session (HUTRR99) */ +#define KEY_CAMERA_ACCESS_ENABLE 0x24b /* Enables programmatic access to camera devices. (HUTRR72) */ +#define KEY_CAMERA_ACCESS_DISABLE 0x24c /* Disables programmatic access to camera devices. (HUTRR72) */ +#define KEY_CAMERA_ACCESS_TOGGLE 0x24d /* Toggles the current state of the camera access control. (HUTRR72) */ #define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */ #define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */ @@ -659,6 +665,27 @@ /* Select an area of screen to be copied */ #define KEY_SELECTIVE_SCREENSHOT 0x27a +/* Move the focus to the next or previous user controllable element within a UI container */ +#define KEY_NEXT_ELEMENT 0x27b +#define KEY_PREVIOUS_ELEMENT 0x27c + +/* Toggle Autopilot engagement */ +#define KEY_AUTOPILOT_ENGAGE_TOGGLE 0x27d + +/* Shortcut Keys */ +#define KEY_MARK_WAYPOINT 0x27e +#define KEY_SOS 0x27f +#define KEY_NAV_CHART 0x280 +#define KEY_FISHING_CHART 0x281 +#define KEY_SINGLE_RANGE_RADAR 0x282 +#define KEY_DUAL_RANGE_RADAR 0x283 +#define KEY_RADAR_OVERLAY 0x284 +#define KEY_TRADITIONAL_SONAR 0x285 +#define KEY_CLEARVU_SONAR 0x286 +#define KEY_SIDEVU_SONAR 0x287 +#define KEY_NAV_INFO 0x288 +#define KEY_BRIGHTNESS_MENU 0x289 + /* * Some keyboards have keys which do not have a defined meaning, these keys * are intended to be programmed / bound to macros by the user. For most @@ -838,6 +865,7 @@ #define ABS_TOOL_WIDTH 0x1c #define ABS_VOLUME 0x20 +#define ABS_PROFILE 0x21 #define ABS_MISC 0x28 diff --git a/linux-headers/include/linux/input.h b/linux-headers/include/linux/input.h index 537d23ea000..7f37e6e40ac 100644 --- a/linux-headers/include/linux/input.h +++ b/linux-headers/include/linux/input.h @@ -76,13 +76,16 @@ struct input_id { * Note that input core does not clamp reported values to the * [minimum, maximum] limits, such task is left to userspace. * - * The default resolution for main axes (ABS_X, ABS_Y, ABS_Z) - * is reported in units per millimeter (units/mm), resolution - * for rotational axes (ABS_RX, ABS_RY, ABS_RZ) is reported - * in units per radian. + * The default resolution for main axes (ABS_X, ABS_Y, ABS_Z, + * ABS_MT_POSITION_X, ABS_MT_POSITION_Y) is reported in units + * per millimeter (units/mm), resolution for rotational axes + * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian. + * The resolution for the size axes (ABS_MT_TOUCH_MAJOR, + * ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MAJOR, ABS_MT_WIDTH_MINOR) + * is reported in units per millimeter (units/mm). * When INPUT_PROP_ACCELEROMETER is set the resolution changes. * The main axes (ABS_X, ABS_Y, ABS_Z) are then reported in - * in units per g (units/g) and in units per degree per second + * units per g (units/g) and in units per degree per second * (units/deg/s) for rotational axes (ABS_RX, ABS_RY, ABS_RZ). */ struct input_absinfo { @@ -269,6 +272,7 @@ struct input_mask { #define BUS_RMI 0x1D #define BUS_CEC 0x1E #define BUS_INTEL_ISHTP 0x1F +#define BUS_AMD_SFH 0x20 /* * MT_TOOL types diff --git a/linux-headers/include/linux/io_uring.h b/linux-headers/include/linux/io_uring.h index 98d8e06dea2..8e61f8b7c2c 100644 --- a/linux-headers/include/linux/io_uring.h +++ b/linux-headers/include/linux/io_uring.h @@ -10,6 +10,19 @@ #include #include +/* + * this file is shared with liburing and that has to autodetect + * if linux/time_types.h is available or not, it can + * define UAPI_LINUX_IO_URING_H_SKIP_LINUX_TIME_TYPES_H + * if linux/time_types.h is not available + */ +#ifndef UAPI_LINUX_IO_URING_H_SKIP_LINUX_TIME_TYPES_H +#include +#endif + +#ifdef __cplusplus +extern "C" { +#endif /* * IO submission data structure (Submission Queue Entry) @@ -22,6 +35,10 @@ struct io_uring_sqe { union { __u64 off; /* offset into file */ __u64 addr2; + struct { + __u32 cmd_op; + __u32 __pad1; + }; }; union { __u64 addr; /* pointer to buffer or iovecs */ @@ -42,25 +59,53 @@ struct io_uring_sqe { __u32 statx_flags; __u32 fadvise_advice; __u32 splice_flags; + __u32 rename_flags; + __u32 unlink_flags; + __u32 hardlink_flags; + __u32 xattr_flags; + __u32 msg_ring_flags; + __u32 uring_cmd_flags; }; __u64 user_data; /* data to be passed back at completion time */ + /* pack this to avoid bogus arm OABI complaints */ + union { + /* index into fixed buffers, if used */ + __u16 buf_index; + /* for grouped buffer selection */ + __u16 buf_group; + } __attribute__((packed)); + /* personality to use, if used */ + __u16 personality; + union { + __s32 splice_fd_in; + __u32 file_index; + struct { + __u16 addr_len; + __u16 __pad3[1]; + }; + }; union { struct { - /* pack this to avoid bogus arm OABI complaints */ - union { - /* index into fixed buffers, if used */ - __u16 buf_index; - /* for grouped buffer selection */ - __u16 buf_group; - } __attribute__((packed)); - /* personality to use, if used */ - __u16 personality; - __s32 splice_fd_in; + __u64 addr3; + __u64 __pad2[1]; }; - __u64 __pad2[3]; + /* + * If the ring is initialized with IORING_SETUP_SQE128, then + * this field is used for 80 bytes of arbitrary command data + */ + __u8 cmd[0]; }; }; +/* + * If sqe->file_index is set to this for opcodes that instantiate a new + * direct descriptor (like openat/openat2/accept), then io_uring will allocate + * an available direct descriptor instead of having the application pass one + * in. The picked direct descriptor will be returned in cqe->res, or -ENFILE + * if the space is full. + */ +#define IORING_FILE_INDEX_ALLOC (~0U) + enum { IOSQE_FIXED_FILE_BIT, IOSQE_IO_DRAIN_BIT, @@ -68,6 +113,7 @@ enum { IOSQE_IO_HARDLINK_BIT, IOSQE_ASYNC_BIT, IOSQE_BUFFER_SELECT_BIT, + IOSQE_CQE_SKIP_SUCCESS_BIT, }; /* @@ -85,6 +131,8 @@ enum { #define IOSQE_ASYNC (1U << IOSQE_ASYNC_BIT) /* select buffer from sqe->buf_group */ #define IOSQE_BUFFER_SELECT (1U << IOSQE_BUFFER_SELECT_BIT) +/* don't post CQE if request succeeded */ +#define IOSQE_CQE_SKIP_SUCCESS (1U << IOSQE_CQE_SKIP_SUCCESS_BIT) /* * io_uring_setup() flags @@ -96,8 +144,53 @@ enum { #define IORING_SETUP_CLAMP (1U << 4) /* clamp SQ/CQ ring sizes */ #define IORING_SETUP_ATTACH_WQ (1U << 5) /* attach to existing wq */ #define IORING_SETUP_R_DISABLED (1U << 6) /* start with ring disabled */ +#define IORING_SETUP_SUBMIT_ALL (1U << 7) /* continue submit on error */ +/* + * Cooperative task running. When requests complete, they often require + * forcing the submitter to transition to the kernel to complete. If this + * flag is set, work will be done when the task transitions anyway, rather + * than force an inter-processor interrupt reschedule. This avoids interrupting + * a task running in userspace, and saves an IPI. + */ +#define IORING_SETUP_COOP_TASKRUN (1U << 8) +/* + * If COOP_TASKRUN is set, get notified if task work is available for + * running and a kernel transition would be needed to run it. This sets + * IORING_SQ_TASKRUN in the sq ring flags. Not valid with COOP_TASKRUN. + */ +#define IORING_SETUP_TASKRUN_FLAG (1U << 9) +#define IORING_SETUP_SQE128 (1U << 10) /* SQEs are 128 byte */ +#define IORING_SETUP_CQE32 (1U << 11) /* CQEs are 32 byte */ +/* + * Only one task is allowed to submit requests + */ +#define IORING_SETUP_SINGLE_ISSUER (1U << 12) -enum { +/* + * Defer running task work to get events. + * Rather than running bits of task work whenever the task transitions + * try to do it just before it is needed. + */ +#define IORING_SETUP_DEFER_TASKRUN (1U << 13) + +/* + * Application provides the memory for the rings + */ +#define IORING_SETUP_NO_MMAP (1U << 14) + +/* + * Register the ring fd in itself for use with + * IORING_REGISTER_USE_REGISTERED_RING; return a registered fd index rather + * than an fd. + */ +#define IORING_SETUP_REGISTERED_FD_ONLY (1U << 15) + +/* + * Removes indirection through the SQ index array. + */ +#define IORING_SETUP_NO_SQARRAY (1U << 16) + +enum io_uring_op { IORING_OP_NOP, IORING_OP_READV, IORING_OP_WRITEV, @@ -132,11 +225,36 @@ enum { IORING_OP_PROVIDE_BUFFERS, IORING_OP_REMOVE_BUFFERS, IORING_OP_TEE, + IORING_OP_SHUTDOWN, + IORING_OP_RENAMEAT, + IORING_OP_UNLINKAT, + IORING_OP_MKDIRAT, + IORING_OP_SYMLINKAT, + IORING_OP_LINKAT, + IORING_OP_MSG_RING, + IORING_OP_FSETXATTR, + IORING_OP_SETXATTR, + IORING_OP_FGETXATTR, + IORING_OP_GETXATTR, + IORING_OP_SOCKET, + IORING_OP_URING_CMD, + IORING_OP_SEND_ZC, + IORING_OP_SENDMSG_ZC, /* this goes last, obviously */ IORING_OP_LAST, }; +/* + * sqe->uring_cmd_flags + * IORING_URING_CMD_FIXED use registered buffer; pass this flag + * along with setting sqe->buf_index. + * IORING_URING_CMD_POLLED driver use only + */ +#define IORING_URING_CMD_FIXED (1U << 0) +#define IORING_URING_CMD_POLLED (1U << 31) + + /* * sqe->fsync_flags */ @@ -145,14 +263,117 @@ enum { /* * sqe->timeout_flags */ -#define IORING_TIMEOUT_ABS (1U << 0) - +#define IORING_TIMEOUT_ABS (1U << 0) +#define IORING_TIMEOUT_UPDATE (1U << 1) +#define IORING_TIMEOUT_BOOTTIME (1U << 2) +#define IORING_TIMEOUT_REALTIME (1U << 3) +#define IORING_LINK_TIMEOUT_UPDATE (1U << 4) +#define IORING_TIMEOUT_ETIME_SUCCESS (1U << 5) +#define IORING_TIMEOUT_MULTISHOT (1U << 6) +#define IORING_TIMEOUT_CLOCK_MASK (IORING_TIMEOUT_BOOTTIME | IORING_TIMEOUT_REALTIME) +#define IORING_TIMEOUT_UPDATE_MASK (IORING_TIMEOUT_UPDATE | IORING_LINK_TIMEOUT_UPDATE) /* * sqe->splice_flags * extends splice(2) flags */ #define SPLICE_F_FD_IN_FIXED (1U << 31) /* the last bit of __u32 */ +/* + * POLL_ADD flags. Note that since sqe->poll_events is the flag space, the + * command flags for POLL_ADD are stored in sqe->len. + * + * IORING_POLL_ADD_MULTI Multishot poll. Sets IORING_CQE_F_MORE if + * the poll handler will continue to report + * CQEs on behalf of the same SQE. + * + * IORING_POLL_UPDATE Update existing poll request, matching + * sqe->addr as the old user_data field. + * + * IORING_POLL_LEVEL Level triggered poll. + */ +#define IORING_POLL_ADD_MULTI (1U << 0) +#define IORING_POLL_UPDATE_EVENTS (1U << 1) +#define IORING_POLL_UPDATE_USER_DATA (1U << 2) +#define IORING_POLL_ADD_LEVEL (1U << 3) + +/* + * ASYNC_CANCEL flags. + * + * IORING_ASYNC_CANCEL_ALL Cancel all requests that match the given key + * IORING_ASYNC_CANCEL_FD Key off 'fd' for cancelation rather than the + * request 'user_data' + * IORING_ASYNC_CANCEL_ANY Match any request + * IORING_ASYNC_CANCEL_FD_FIXED 'fd' passed in is a fixed descriptor + * IORING_ASYNC_CANCEL_USERDATA Match on user_data, default for no other key + * IORING_ASYNC_CANCEL_OP Match request based on opcode + */ +#define IORING_ASYNC_CANCEL_ALL (1U << 0) +#define IORING_ASYNC_CANCEL_FD (1U << 1) +#define IORING_ASYNC_CANCEL_ANY (1U << 2) +#define IORING_ASYNC_CANCEL_FD_FIXED (1U << 3) +#define IORING_ASYNC_CANCEL_USERDATA (1U << 4) +#define IORING_ASYNC_CANCEL_OP (1U << 5) + +/* + * send/sendmsg and recv/recvmsg flags (sqe->ioprio) + * + * IORING_RECVSEND_POLL_FIRST If set, instead of first attempting to send + * or receive and arm poll if that yields an + * -EAGAIN result, arm poll upfront and skip + * the initial transfer attempt. + * + * IORING_RECV_MULTISHOT Multishot recv. Sets IORING_CQE_F_MORE if + * the handler will continue to report + * CQEs on behalf of the same SQE. + * + * IORING_RECVSEND_FIXED_BUF Use registered buffers, the index is stored in + * the buf_index field. + * + * IORING_SEND_ZC_REPORT_USAGE + * If set, SEND[MSG]_ZC should report + * the zerocopy usage in cqe.res + * for the IORING_CQE_F_NOTIF cqe. + * 0 is reported if zerocopy was actually possible. + * IORING_NOTIF_USAGE_ZC_COPIED if data was copied + * (at least partially). + */ +#define IORING_RECVSEND_POLL_FIRST (1U << 0) +#define IORING_RECV_MULTISHOT (1U << 1) +#define IORING_RECVSEND_FIXED_BUF (1U << 2) +#define IORING_SEND_ZC_REPORT_USAGE (1U << 3) + +/* + * cqe.res for IORING_CQE_F_NOTIF if + * IORING_SEND_ZC_REPORT_USAGE was requested + * + * It should be treated as a flag, all other + * bits of cqe.res should be treated as reserved! + */ +#define IORING_NOTIF_USAGE_ZC_COPIED (1U << 31) + +/* + * accept flags stored in sqe->ioprio + */ +#define IORING_ACCEPT_MULTISHOT (1U << 0) + +/* + * IORING_OP_MSG_RING command types, stored in sqe->addr + */ +enum { + IORING_MSG_DATA, /* pass sqe->len as 'res' and off as user_data */ + IORING_MSG_SEND_FD, /* send a registered fd to another ring */ +}; + +/* + * IORING_OP_MSG_RING flags (sqe->msg_ring_flags) + * + * IORING_MSG_RING_CQE_SKIP Don't post a CQE to the target ring. Not + * applicable for IORING_MSG_DATA, obviously. + */ +#define IORING_MSG_RING_CQE_SKIP (1U << 0) +/* Pass through the flags from sqe->file_index to cqe->flags */ +#define IORING_MSG_RING_FLAGS_PASS (1U << 1) + /* * IO completion data structure (Completion Queue Entry) */ @@ -160,14 +381,27 @@ struct io_uring_cqe { __u64 user_data; /* sqe->data submission passed back */ __s32 res; /* result code for this event */ __u32 flags; + + /* + * If the ring is initialized with IORING_SETUP_CQE32, then this field + * contains 16-bytes of padding, doubling the size of the CQE. + */ + __u64 big_cqe[]; }; /* * cqe->flags * * IORING_CQE_F_BUFFER If set, the upper 16 bits are the buffer ID + * IORING_CQE_F_MORE If set, parent SQE will generate more CQE entries + * IORING_CQE_F_SOCK_NONEMPTY If set, more data to read after socket recv + * IORING_CQE_F_NOTIF Set for notification CQEs. Can be used to distinct + * them from sends. */ #define IORING_CQE_F_BUFFER (1U << 0) +#define IORING_CQE_F_MORE (1U << 1) +#define IORING_CQE_F_SOCK_NONEMPTY (1U << 2) +#define IORING_CQE_F_NOTIF (1U << 3) enum { IORING_CQE_BUFFER_SHIFT = 16, @@ -179,6 +413,9 @@ enum { #define IORING_OFF_SQ_RING 0ULL #define IORING_OFF_CQ_RING 0x8000000ULL #define IORING_OFF_SQES 0x10000000ULL +#define IORING_OFF_PBUF_RING 0x80000000ULL +#define IORING_OFF_PBUF_SHIFT 16 +#define IORING_OFF_MMAP_MASK 0xf8000000ULL /* * Filled with the offset for mmap(2) @@ -192,7 +429,7 @@ struct io_sqring_offsets { __u32 dropped; __u32 array; __u32 resv1; - __u64 resv2; + __u64 user_addr; }; /* @@ -200,6 +437,7 @@ struct io_sqring_offsets { */ #define IORING_SQ_NEED_WAKEUP (1U << 0) /* needs io_uring_enter wakeup */ #define IORING_SQ_CQ_OVERFLOW (1U << 1) /* CQ ring is overflown */ +#define IORING_SQ_TASKRUN (1U << 2) /* task should enter the kernel */ struct io_cqring_offsets { __u32 head; @@ -210,7 +448,7 @@ struct io_cqring_offsets { __u32 cqes; __u32 flags; __u32 resv1; - __u64 resv2; + __u64 user_addr; }; /* @@ -223,9 +461,11 @@ struct io_cqring_offsets { /* * io_uring_enter(2) flags */ -#define IORING_ENTER_GETEVENTS (1U << 0) -#define IORING_ENTER_SQ_WAKEUP (1U << 1) -#define IORING_ENTER_SQ_WAIT (1U << 2) +#define IORING_ENTER_GETEVENTS (1U << 0) +#define IORING_ENTER_SQ_WAKEUP (1U << 1) +#define IORING_ENTER_SQ_WAIT (1U << 2) +#define IORING_ENTER_EXT_ARG (1U << 3) +#define IORING_ENTER_REGISTERED_RING (1U << 4) /* * Passed in for io_uring_setup(2). Copied back with updated info on success @@ -253,6 +493,13 @@ struct io_uring_params { #define IORING_FEAT_CUR_PERSONALITY (1U << 4) #define IORING_FEAT_FAST_POLL (1U << 5) #define IORING_FEAT_POLL_32BITS (1U << 6) +#define IORING_FEAT_SQPOLL_NONFIXED (1U << 7) +#define IORING_FEAT_EXT_ARG (1U << 8) +#define IORING_FEAT_NATIVE_WORKERS (1U << 9) +#define IORING_FEAT_RSRC_TAGS (1U << 10) +#define IORING_FEAT_CQE_SKIP (1U << 11) +#define IORING_FEAT_LINKED_FILE (1U << 12) +#define IORING_FEAT_REG_REG_RING (1U << 13) /* * io_uring_register(2) opcodes and arguments @@ -272,16 +519,85 @@ enum { IORING_REGISTER_RESTRICTIONS = 11, IORING_REGISTER_ENABLE_RINGS = 12, + /* extended with tagging */ + IORING_REGISTER_FILES2 = 13, + IORING_REGISTER_FILES_UPDATE2 = 14, + IORING_REGISTER_BUFFERS2 = 15, + IORING_REGISTER_BUFFERS_UPDATE = 16, + + /* set/clear io-wq thread affinities */ + IORING_REGISTER_IOWQ_AFF = 17, + IORING_UNREGISTER_IOWQ_AFF = 18, + + /* set/get max number of io-wq workers */ + IORING_REGISTER_IOWQ_MAX_WORKERS = 19, + + /* register/unregister io_uring fd with the ring */ + IORING_REGISTER_RING_FDS = 20, + IORING_UNREGISTER_RING_FDS = 21, + + /* register ring based provide buffer group */ + IORING_REGISTER_PBUF_RING = 22, + IORING_UNREGISTER_PBUF_RING = 23, + + /* sync cancelation API */ + IORING_REGISTER_SYNC_CANCEL = 24, + + /* register a range of fixed file slots for automatic slot allocation */ + IORING_REGISTER_FILE_ALLOC_RANGE = 25, + /* this goes last */ - IORING_REGISTER_LAST + IORING_REGISTER_LAST, + + /* flag added to the opcode to use a registered ring fd */ + IORING_REGISTER_USE_REGISTERED_RING = 1U << 31 }; +/* io-wq worker categories */ +enum { + IO_WQ_BOUND, + IO_WQ_UNBOUND, +}; + +/* deprecated, see struct io_uring_rsrc_update */ struct io_uring_files_update { __u32 offset; __u32 resv; __aligned_u64 /* __s32 * */ fds; }; +/* + * Register a fully sparse file space, rather than pass in an array of all + * -1 file descriptors. + */ +#define IORING_RSRC_REGISTER_SPARSE (1U << 0) + +struct io_uring_rsrc_register { + __u32 nr; + __u32 flags; + __u64 resv2; + __aligned_u64 data; + __aligned_u64 tags; +}; + +struct io_uring_rsrc_update { + __u32 offset; + __u32 resv; + __aligned_u64 data; +}; + +struct io_uring_rsrc_update2 { + __u32 offset; + __u32 resv; + __aligned_u64 data; + __aligned_u64 tags; + __u32 nr; + __u32 resv2; +}; + +/* Skip updating fd indexes set to this value in the fd table */ +#define IORING_REGISTER_FILES_SKIP (-2) + #define IO_URING_OP_SUPPORTED (1U << 0) struct io_uring_probe_op { @@ -296,7 +612,7 @@ struct io_uring_probe { __u8 ops_len; /* length of ops[] array below */ __u16 resv; __u32 resv2[3]; - struct io_uring_probe_op ops[0]; + struct io_uring_probe_op ops[]; }; struct io_uring_restriction { @@ -310,6 +626,52 @@ struct io_uring_restriction { __u32 resv2[3]; }; +struct io_uring_buf { + __u64 addr; + __u32 len; + __u16 bid; + __u16 resv; +}; + +struct io_uring_buf_ring { + union { + /* + * To avoid spilling into more pages than we need to, the + * ring tail is overlaid with the io_uring_buf->resv field. + */ + struct { + __u64 resv1; + __u32 resv2; + __u16 resv3; + __u16 tail; + }; + __DECLARE_FLEX_ARRAY(struct io_uring_buf, bufs); + }; +}; + +/* + * Flags for IORING_REGISTER_PBUF_RING. + * + * IOU_PBUF_RING_MMAP: If set, kernel will allocate the memory for the ring. + * The application must not set a ring_addr in struct + * io_uring_buf_reg, instead it must subsequently call + * mmap(2) with the offset set as: + * IORING_OFF_PBUF_RING | (bgid << IORING_OFF_PBUF_SHIFT) + * to get a virtual mapping for the ring. + */ +enum { + IOU_PBUF_RING_MMAP = 1, +}; + +/* argument for IORING_(UN)REGISTER_PBUF_RING */ +struct io_uring_buf_reg { + __u64 ring_addr; + __u32 ring_entries; + __u16 bgid; + __u16 flags; + __u64 resv[3]; +}; + /* * io_uring_restriction->opcode values */ @@ -329,4 +691,53 @@ enum { IORING_RESTRICTION_LAST }; +struct io_uring_getevents_arg { + __u64 sigmask; + __u32 sigmask_sz; + __u32 pad; + __u64 ts; +}; + +/* + * Argument for IORING_REGISTER_SYNC_CANCEL + */ +struct io_uring_sync_cancel_reg { + __u64 addr; + __s32 fd; + __u32 flags; + struct __kernel_timespec timeout; + __u8 opcode; + __u8 pad[7]; + __u64 pad2[3]; +}; + +/* + * Argument for IORING_REGISTER_FILE_ALLOC_RANGE + * The range is specified as [off, off + len) + */ +struct io_uring_file_index_range { + __u32 off; + __u32 len; + __u64 resv; +}; + +struct io_uring_recvmsg_out { + __u32 namelen; + __u32 controllen; + __u32 payloadlen; + __u32 flags; +}; + +/* + * Argument for IORING_OP_URING_CMD when file is a socket + */ +enum { + SOCKET_URING_OP_SIOCINQ = 0, + SOCKET_URING_OP_SIOCOUTQ, +}; + +#ifdef __cplusplus +} +#endif + #endif diff --git a/linux-headers/include/linux/ioam6.h b/linux-headers/include/linux/ioam6.h new file mode 100644 index 00000000000..e646011ce13 --- /dev/null +++ b/linux-headers/include/linux/ioam6.h @@ -0,0 +1,133 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * IPv6 IOAM implementation + * + * Author: + * Justin Iurman + */ + +#ifndef _LINUX_IOAM6_H +#define _LINUX_IOAM6_H + +#include +#include + +#define IOAM6_U16_UNAVAILABLE U16_MAX +#define IOAM6_U32_UNAVAILABLE U32_MAX +#define IOAM6_U64_UNAVAILABLE U64_MAX + +#define IOAM6_DEFAULT_ID (IOAM6_U32_UNAVAILABLE >> 8) +#define IOAM6_DEFAULT_ID_WIDE (IOAM6_U64_UNAVAILABLE >> 8) +#define IOAM6_DEFAULT_IF_ID IOAM6_U16_UNAVAILABLE +#define IOAM6_DEFAULT_IF_ID_WIDE IOAM6_U32_UNAVAILABLE + +/* + * IPv6 IOAM Option Header + */ +struct ioam6_hdr { + __u8 opt_type; + __u8 opt_len; + __u8 :8; /* reserved */ +#define IOAM6_TYPE_PREALLOC 0 + __u8 type; +} __attribute__((packed)); + +/* + * IOAM Trace Header + */ +struct ioam6_trace_hdr { + __be16 namespace_id; + +#if defined(__LITTLE_ENDIAN_BITFIELD) + + __u8 :1, /* unused */ + :1, /* unused */ + overflow:1, + nodelen:5; + + __u8 remlen:7, + :1; /* unused */ + + union { + __be32 type_be32; + + struct { + __u32 bit7:1, + bit6:1, + bit5:1, + bit4:1, + bit3:1, + bit2:1, + bit1:1, + bit0:1, + bit15:1, /* unused */ + bit14:1, /* unused */ + bit13:1, /* unused */ + bit12:1, /* unused */ + bit11:1, + bit10:1, + bit9:1, + bit8:1, + bit23:1, /* reserved */ + bit22:1, + bit21:1, /* unused */ + bit20:1, /* unused */ + bit19:1, /* unused */ + bit18:1, /* unused */ + bit17:1, /* unused */ + bit16:1, /* unused */ + :8; /* reserved */ + } type; + }; + +#elif defined(__BIG_ENDIAN_BITFIELD) + + __u8 nodelen:5, + overflow:1, + :1, /* unused */ + :1; /* unused */ + + __u8 :1, /* unused */ + remlen:7; + + union { + __be32 type_be32; + + struct { + __u32 bit0:1, + bit1:1, + bit2:1, + bit3:1, + bit4:1, + bit5:1, + bit6:1, + bit7:1, + bit8:1, + bit9:1, + bit10:1, + bit11:1, + bit12:1, /* unused */ + bit13:1, /* unused */ + bit14:1, /* unused */ + bit15:1, /* unused */ + bit16:1, /* unused */ + bit17:1, /* unused */ + bit18:1, /* unused */ + bit19:1, /* unused */ + bit20:1, /* unused */ + bit21:1, /* unused */ + bit22:1, + bit23:1, /* reserved */ + :8; /* reserved */ + } type; + }; + +#else +#error "Please fix " +#endif + +#define IOAM6_TRACE_DATA_SIZE_MAX 244 + __u8 data[]; +} __attribute__((packed)); + +#endif /* _LINUX_IOAM6_H */ diff --git a/linux-headers/include/linux/ioam6_genl.h b/linux-headers/include/linux/ioam6_genl.h new file mode 100644 index 00000000000..6043d9f60db --- /dev/null +++ b/linux-headers/include/linux/ioam6_genl.h @@ -0,0 +1,52 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * IPv6 IOAM Generic Netlink API + * + * Author: + * Justin Iurman + */ + +#ifndef _LINUX_IOAM6_GENL_H +#define _LINUX_IOAM6_GENL_H + +#define IOAM6_GENL_NAME "IOAM6" +#define IOAM6_GENL_VERSION 0x1 + +enum { + IOAM6_ATTR_UNSPEC, + + IOAM6_ATTR_NS_ID, /* u16 */ + IOAM6_ATTR_NS_DATA, /* u32 */ + IOAM6_ATTR_NS_DATA_WIDE,/* u64 */ + +#define IOAM6_MAX_SCHEMA_DATA_LEN (255 * 4) + IOAM6_ATTR_SC_ID, /* u32 */ + IOAM6_ATTR_SC_DATA, /* Binary */ + IOAM6_ATTR_SC_NONE, /* Flag */ + + IOAM6_ATTR_PAD, + + __IOAM6_ATTR_MAX, +}; + +#define IOAM6_ATTR_MAX (__IOAM6_ATTR_MAX - 1) + +enum { + IOAM6_CMD_UNSPEC, + + IOAM6_CMD_ADD_NAMESPACE, + IOAM6_CMD_DEL_NAMESPACE, + IOAM6_CMD_DUMP_NAMESPACES, + + IOAM6_CMD_ADD_SCHEMA, + IOAM6_CMD_DEL_SCHEMA, + IOAM6_CMD_DUMP_SCHEMAS, + + IOAM6_CMD_NS_SET_SCHEMA, + + __IOAM6_CMD_MAX, +}; + +#define IOAM6_CMD_MAX (__IOAM6_CMD_MAX - 1) + +#endif /* _LINUX_IOAM6_GENL_H */ diff --git a/linux-headers/include/linux/ioam6_iptunnel.h b/linux-headers/include/linux/ioam6_iptunnel.h new file mode 100644 index 00000000000..750357b7caf --- /dev/null +++ b/linux-headers/include/linux/ioam6_iptunnel.h @@ -0,0 +1,58 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * IPv6 IOAM Lightweight Tunnel API + * + * Author: + * Justin Iurman + */ + +#ifndef _LINUX_IOAM6_IPTUNNEL_H +#define _LINUX_IOAM6_IPTUNNEL_H + +/* Encap modes: + * - inline: direct insertion + * - encap: ip6ip6 encapsulation + * - auto: __inline__ for local packets, encap for in-transit packets + */ +enum { + __IOAM6_IPTUNNEL_MODE_MIN, + + IOAM6_IPTUNNEL_MODE_INLINE, + IOAM6_IPTUNNEL_MODE_ENCAP, + IOAM6_IPTUNNEL_MODE_AUTO, + + __IOAM6_IPTUNNEL_MODE_MAX, +}; + +#define IOAM6_IPTUNNEL_MODE_MIN (__IOAM6_IPTUNNEL_MODE_MIN + 1) +#define IOAM6_IPTUNNEL_MODE_MAX (__IOAM6_IPTUNNEL_MODE_MAX - 1) + +enum { + IOAM6_IPTUNNEL_UNSPEC, + + /* Encap mode */ + IOAM6_IPTUNNEL_MODE, /* u8 */ + + /* Tunnel dst address. + * For encap,auto modes. + */ + IOAM6_IPTUNNEL_DST, /* struct in6_addr */ + + /* IOAM Trace Header */ + IOAM6_IPTUNNEL_TRACE, /* struct ioam6_trace_hdr */ + + /* Insertion frequency: + * "k over n" packets (0 < k <= n) + * [0.0001% ... 100%] + */ +#define IOAM6_IPTUNNEL_FREQ_MIN 1 +#define IOAM6_IPTUNNEL_FREQ_MAX 1000000 + IOAM6_IPTUNNEL_FREQ_K, /* u32 */ + IOAM6_IPTUNNEL_FREQ_N, /* u32 */ + + __IOAM6_IPTUNNEL_MAX, +}; + +#define IOAM6_IPTUNNEL_MAX (__IOAM6_IPTUNNEL_MAX - 1) + +#endif /* _LINUX_IOAM6_IPTUNNEL_H */ diff --git a/linux-headers/include/linux/iommu.h b/linux-headers/include/linux/iommu.h index 4b5bc15965a..1fba88327bb 100644 --- a/linux-headers/include/linux/iommu.h +++ b/linux-headers/include/linux/iommu.h @@ -158,184 +158,4 @@ struct iommu_page_response { __u32 code; }; -/* defines the granularity of the invalidation */ -enum iommu_inv_granularity { - IOMMU_INV_GRANU_DOMAIN, /* domain-selective invalidation */ - IOMMU_INV_GRANU_PASID, /* PASID-selective invalidation */ - IOMMU_INV_GRANU_ADDR, /* page-selective invalidation */ - IOMMU_INV_GRANU_NR, /* number of invalidation granularities */ -}; - -/** - * struct iommu_inv_addr_info - Address Selective Invalidation Structure - * - * @flags: indicates the granularity of the address-selective invalidation - * - If the PASID bit is set, the @pasid field is populated and the invalidation - * relates to cache entries tagged with this PASID and matching the address - * range. - * - If ARCHID bit is set, @archid is populated and the invalidation relates - * to cache entries tagged with this architecture specific ID and matching - * the address range. - * - Both PASID and ARCHID can be set as they may tag different caches. - * - If neither PASID or ARCHID is set, global addr invalidation applies. - * - The LEAF flag indicates whether only the leaf PTE caching needs to be - * invalidated and other paging structure caches can be preserved. - * @pasid: process address space ID - * @archid: architecture-specific ID - * @addr: first stage/level input address - * @granule_size: page/block size of the mapping in bytes - * @nb_granules: number of contiguous granules to be invalidated - */ -struct iommu_inv_addr_info { -#define IOMMU_INV_ADDR_FLAGS_PASID (1 << 0) -#define IOMMU_INV_ADDR_FLAGS_ARCHID (1 << 1) -#define IOMMU_INV_ADDR_FLAGS_LEAF (1 << 2) - __u32 flags; - __u32 archid; - __u64 pasid; - __u64 addr; - __u64 granule_size; - __u64 nb_granules; -}; - -/** - * struct iommu_inv_pasid_info - PASID Selective Invalidation Structure - * - * @flags: indicates the granularity of the PASID-selective invalidation - * - If the PASID bit is set, the @pasid field is populated and the invalidation - * relates to cache entries tagged with this PASID and matching the address - * range. - * - If the ARCHID bit is set, the @archid is populated and the invalidation - * relates to cache entries tagged with this architecture specific ID and - * matching the address range. - * - Both PASID and ARCHID can be set as they may tag different caches. - * - At least one of PASID or ARCHID must be set. - * @pasid: process address space ID - * @archid: architecture-specific ID - */ -struct iommu_inv_pasid_info { -#define IOMMU_INV_PASID_FLAGS_PASID (1 << 0) -#define IOMMU_INV_PASID_FLAGS_ARCHID (1 << 1) - __u32 flags; - __u32 archid; - __u64 pasid; -}; - -/** - * struct iommu_cache_invalidate_info - First level/stage invalidation - * information - * @argsz: User filled size of this data - * @version: API version of this structure - * @cache: bitfield that allows to select which caches to invalidate - * @granularity: defines the lowest granularity used for the invalidation: - * domain > PASID > addr - * @padding: reserved for future use (should be zero) - * @pasid_info: invalidation data when @granularity is %IOMMU_INV_GRANU_PASID - * @addr_info: invalidation data when @granularity is %IOMMU_INV_GRANU_ADDR - * - * Not all the combinations of cache/granularity are valid: - * - * +--------------+---------------+---------------+---------------+ - * | type / | DEV_IOTLB | IOTLB | PASID | - * | granularity | | | cache | - * +==============+===============+===============+===============+ - * | DOMAIN | N/A | Y | Y | - * +--------------+---------------+---------------+---------------+ - * | PASID | Y | Y | Y | - * +--------------+---------------+---------------+---------------+ - * | ADDR | Y | Y | N/A | - * +--------------+---------------+---------------+---------------+ - * - * Invalidations by %IOMMU_INV_GRANU_DOMAIN don't take any argument other than - * @version and @cache. - * - * If multiple cache types are invalidated simultaneously, they all - * must support the used granularity. - */ -struct iommu_cache_invalidate_info { - __u32 argsz; -#define IOMMU_CACHE_INVALIDATE_INFO_VERSION_1 1 - __u32 version; -/* IOMMU paging structure cache */ -#define IOMMU_CACHE_INV_TYPE_IOTLB (1 << 0) /* IOMMU IOTLB */ -#define IOMMU_CACHE_INV_TYPE_DEV_IOTLB (1 << 1) /* Device IOTLB */ -#define IOMMU_CACHE_INV_TYPE_PASID (1 << 2) /* PASID cache */ -#define IOMMU_CACHE_INV_TYPE_NR (3) - __u8 cache; - __u8 granularity; - __u8 padding[6]; - union { - struct iommu_inv_pasid_info pasid_info; - struct iommu_inv_addr_info addr_info; - } granu; -}; - -/** - * struct iommu_gpasid_bind_data_vtd - Intel VT-d specific data on device and guest - * SVA binding. - * - * @flags: VT-d PASID table entry attributes - * @pat: Page attribute table data to compute effective memory type - * @emt: Extended memory type - * - * Only guest vIOMMU selectable and effective options are passed down to - * the host IOMMU. - */ -struct iommu_gpasid_bind_data_vtd { -#define IOMMU_SVA_VTD_GPASID_SRE (1 << 0) /* supervisor request */ -#define IOMMU_SVA_VTD_GPASID_EAFE (1 << 1) /* extended access enable */ -#define IOMMU_SVA_VTD_GPASID_PCD (1 << 2) /* page-level cache disable */ -#define IOMMU_SVA_VTD_GPASID_PWT (1 << 3) /* page-level write through */ -#define IOMMU_SVA_VTD_GPASID_EMTE (1 << 4) /* extended mem type enable */ -#define IOMMU_SVA_VTD_GPASID_CD (1 << 5) /* PASID-level cache disable */ -#define IOMMU_SVA_VTD_GPASID_LAST (1 << 6) - __u64 flags; - __u32 pat; - __u32 emt; -}; - -#define IOMMU_SVA_VTD_GPASID_MTS_MASK (IOMMU_SVA_VTD_GPASID_CD | \ - IOMMU_SVA_VTD_GPASID_EMTE | \ - IOMMU_SVA_VTD_GPASID_PCD | \ - IOMMU_SVA_VTD_GPASID_PWT) - -/** - * struct iommu_gpasid_bind_data - Information about device and guest PASID binding - * @argsz: User filled size of this data - * @version: Version of this data structure - * @format: PASID table entry format - * @flags: Additional information on guest bind request - * @gpgd: Guest page directory base of the guest mm to bind - * @hpasid: Process address space ID used for the guest mm in host IOMMU - * @gpasid: Process address space ID used for the guest mm in guest IOMMU - * @addr_width: Guest virtual address width - * @padding: Reserved for future use (should be zero) - * @vtd: Intel VT-d specific data - * - * Guest to host PASID mapping can be an identity or non-identity, where guest - * has its own PASID space. For non-identify mapping, guest to host PASID lookup - * is needed when VM programs guest PASID into an assigned device. VMM may - * trap such PASID programming then request host IOMMU driver to convert guest - * PASID to host PASID based on this bind data. - */ -struct iommu_gpasid_bind_data { - __u32 argsz; -#define IOMMU_GPASID_BIND_VERSION_1 1 - __u32 version; -#define IOMMU_PASID_FORMAT_INTEL_VTD 1 -#define IOMMU_PASID_FORMAT_LAST 2 - __u32 format; - __u32 addr_width; -#define IOMMU_SVA_GPASID_VAL (1 << 0) /* guest PASID valid */ - __u64 flags; - __u64 gpgd; - __u64 hpasid; - __u64 gpasid; - __u8 padding[8]; - /* Vendor specific data */ - union { - struct iommu_gpasid_bind_data_vtd vtd; - } vendor; -}; - #endif /* _IOMMU_H */ diff --git a/linux-headers/include/linux/iommufd.h b/linux-headers/include/linux/iommufd.h new file mode 100644 index 00000000000..218bf7ac98d --- /dev/null +++ b/linux-headers/include/linux/iommufd.h @@ -0,0 +1,444 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* Copyright (c) 2021-2022, NVIDIA CORPORATION & AFFILIATES. + */ +#ifndef _IOMMUFD_H +#define _IOMMUFD_H + +#include +#include + +#define IOMMUFD_TYPE (';') + +/** + * DOC: General ioctl format + * + * The ioctl interface follows a general format to allow for extensibility. Each + * ioctl is passed in a structure pointer as the argument providing the size of + * the structure in the first u32. The kernel checks that any structure space + * beyond what it understands is 0. This allows userspace to use the backward + * compatible portion while consistently using the newer, larger, structures. + * + * ioctls use a standard meaning for common errnos: + * + * - ENOTTY: The IOCTL number itself is not supported at all + * - E2BIG: The IOCTL number is supported, but the provided structure has + * non-zero in a part the kernel does not understand. + * - EOPNOTSUPP: The IOCTL number is supported, and the structure is + * understood, however a known field has a value the kernel does not + * understand or support. + * - EINVAL: Everything about the IOCTL was understood, but a field is not + * correct. + * - ENOENT: An ID or IOVA provided does not exist. + * - ENOMEM: Out of memory. + * - EOVERFLOW: Mathematics overflowed. + * + * As well as additional errnos, within specific ioctls. + */ +enum { + IOMMUFD_CMD_BASE = 0x80, + IOMMUFD_CMD_DESTROY = IOMMUFD_CMD_BASE, + IOMMUFD_CMD_IOAS_ALLOC, + IOMMUFD_CMD_IOAS_ALLOW_IOVAS, + IOMMUFD_CMD_IOAS_COPY, + IOMMUFD_CMD_IOAS_IOVA_RANGES, + IOMMUFD_CMD_IOAS_MAP, + IOMMUFD_CMD_IOAS_UNMAP, + IOMMUFD_CMD_OPTION, + IOMMUFD_CMD_VFIO_IOAS, + IOMMUFD_CMD_HWPT_ALLOC, + IOMMUFD_CMD_GET_HW_INFO, +}; + +/** + * struct iommu_destroy - ioctl(IOMMU_DESTROY) + * @size: sizeof(struct iommu_destroy) + * @id: iommufd object ID to destroy. Can be any destroyable object type. + * + * Destroy any object held within iommufd. + */ +struct iommu_destroy { + __u32 size; + __u32 id; +}; +#define IOMMU_DESTROY _IO(IOMMUFD_TYPE, IOMMUFD_CMD_DESTROY) + +/** + * struct iommu_ioas_alloc - ioctl(IOMMU_IOAS_ALLOC) + * @size: sizeof(struct iommu_ioas_alloc) + * @flags: Must be 0 + * @out_ioas_id: Output IOAS ID for the allocated object + * + * Allocate an IO Address Space (IOAS) which holds an IO Virtual Address (IOVA) + * to memory mapping. + */ +struct iommu_ioas_alloc { + __u32 size; + __u32 flags; + __u32 out_ioas_id; +}; +#define IOMMU_IOAS_ALLOC _IO(IOMMUFD_TYPE, IOMMUFD_CMD_IOAS_ALLOC) + +/** + * struct iommu_iova_range - ioctl(IOMMU_IOVA_RANGE) + * @start: First IOVA + * @last: Inclusive last IOVA + * + * An interval in IOVA space. + */ +struct iommu_iova_range { + __aligned_u64 start; + __aligned_u64 last; +}; + +/** + * struct iommu_ioas_iova_ranges - ioctl(IOMMU_IOAS_IOVA_RANGES) + * @size: sizeof(struct iommu_ioas_iova_ranges) + * @ioas_id: IOAS ID to read ranges from + * @num_iovas: Input/Output total number of ranges in the IOAS + * @__reserved: Must be 0 + * @allowed_iovas: Pointer to the output array of struct iommu_iova_range + * @out_iova_alignment: Minimum alignment required for mapping IOVA + * + * Query an IOAS for ranges of allowed IOVAs. Mapping IOVA outside these ranges + * is not allowed. num_iovas will be set to the total number of iovas and + * the allowed_iovas[] will be filled in as space permits. + * + * The allowed ranges are dependent on the HW path the DMA operation takes, and + * can change during the lifetime of the IOAS. A fresh empty IOAS will have a + * full range, and each attached device will narrow the ranges based on that + * device's HW restrictions. Detaching a device can widen the ranges. Userspace + * should query ranges after every attach/detach to know what IOVAs are valid + * for mapping. + * + * On input num_iovas is the length of the allowed_iovas array. On output it is + * the total number of iovas filled in. The ioctl will return -EMSGSIZE and set + * num_iovas to the required value if num_iovas is too small. In this case the + * caller should allocate a larger output array and re-issue the ioctl. + * + * out_iova_alignment returns the minimum IOVA alignment that can be given + * to IOMMU_IOAS_MAP/COPY. IOVA's must satisfy:: + * + * starting_iova % out_iova_alignment == 0 + * (starting_iova + length) % out_iova_alignment == 0 + * + * out_iova_alignment can be 1 indicating any IOVA is allowed. It cannot + * be higher than the system PAGE_SIZE. + */ +struct iommu_ioas_iova_ranges { + __u32 size; + __u32 ioas_id; + __u32 num_iovas; + __u32 __reserved; + __aligned_u64 allowed_iovas; + __aligned_u64 out_iova_alignment; +}; +#define IOMMU_IOAS_IOVA_RANGES _IO(IOMMUFD_TYPE, IOMMUFD_CMD_IOAS_IOVA_RANGES) + +/** + * struct iommu_ioas_allow_iovas - ioctl(IOMMU_IOAS_ALLOW_IOVAS) + * @size: sizeof(struct iommu_ioas_allow_iovas) + * @ioas_id: IOAS ID to allow IOVAs from + * @num_iovas: Input/Output total number of ranges in the IOAS + * @__reserved: Must be 0 + * @allowed_iovas: Pointer to array of struct iommu_iova_range + * + * Ensure a range of IOVAs are always available for allocation. If this call + * succeeds then IOMMU_IOAS_IOVA_RANGES will never return a list of IOVA ranges + * that are narrower than the ranges provided here. This call will fail if + * IOMMU_IOAS_IOVA_RANGES is currently narrower than the given ranges. + * + * When an IOAS is first created the IOVA_RANGES will be maximally sized, and as + * devices are attached the IOVA will narrow based on the device restrictions. + * When an allowed range is specified any narrowing will be refused, ie device + * attachment can fail if the device requires limiting within the allowed range. + * + * Automatic IOVA allocation is also impacted by this call. MAP will only + * allocate within the allowed IOVAs if they are present. + * + * This call replaces the entire allowed list with the given list. + */ +struct iommu_ioas_allow_iovas { + __u32 size; + __u32 ioas_id; + __u32 num_iovas; + __u32 __reserved; + __aligned_u64 allowed_iovas; +}; +#define IOMMU_IOAS_ALLOW_IOVAS _IO(IOMMUFD_TYPE, IOMMUFD_CMD_IOAS_ALLOW_IOVAS) + +/** + * enum iommufd_ioas_map_flags - Flags for map and copy + * @IOMMU_IOAS_MAP_FIXED_IOVA: If clear the kernel will compute an appropriate + * IOVA to place the mapping at + * @IOMMU_IOAS_MAP_WRITEABLE: DMA is allowed to write to this mapping + * @IOMMU_IOAS_MAP_READABLE: DMA is allowed to read from this mapping + */ +enum iommufd_ioas_map_flags { + IOMMU_IOAS_MAP_FIXED_IOVA = 1 << 0, + IOMMU_IOAS_MAP_WRITEABLE = 1 << 1, + IOMMU_IOAS_MAP_READABLE = 1 << 2, +}; + +/** + * struct iommu_ioas_map - ioctl(IOMMU_IOAS_MAP) + * @size: sizeof(struct iommu_ioas_map) + * @flags: Combination of enum iommufd_ioas_map_flags + * @ioas_id: IOAS ID to change the mapping of + * @__reserved: Must be 0 + * @user_va: Userspace pointer to start mapping from + * @length: Number of bytes to map + * @iova: IOVA the mapping was placed at. If IOMMU_IOAS_MAP_FIXED_IOVA is set + * then this must be provided as input. + * + * Set an IOVA mapping from a user pointer. If FIXED_IOVA is specified then the + * mapping will be established at iova, otherwise a suitable location based on + * the reserved and allowed lists will be automatically selected and returned in + * iova. + * + * If IOMMU_IOAS_MAP_FIXED_IOVA is specified then the iova range must currently + * be unused, existing IOVA cannot be replaced. + */ +struct iommu_ioas_map { + __u32 size; + __u32 flags; + __u32 ioas_id; + __u32 __reserved; + __aligned_u64 user_va; + __aligned_u64 length; + __aligned_u64 iova; +}; +#define IOMMU_IOAS_MAP _IO(IOMMUFD_TYPE, IOMMUFD_CMD_IOAS_MAP) + +/** + * struct iommu_ioas_copy - ioctl(IOMMU_IOAS_COPY) + * @size: sizeof(struct iommu_ioas_copy) + * @flags: Combination of enum iommufd_ioas_map_flags + * @dst_ioas_id: IOAS ID to change the mapping of + * @src_ioas_id: IOAS ID to copy from + * @length: Number of bytes to copy and map + * @dst_iova: IOVA the mapping was placed at. If IOMMU_IOAS_MAP_FIXED_IOVA is + * set then this must be provided as input. + * @src_iova: IOVA to start the copy + * + * Copy an already existing mapping from src_ioas_id and establish it in + * dst_ioas_id. The src iova/length must exactly match a range used with + * IOMMU_IOAS_MAP. + * + * This may be used to efficiently clone a subset of an IOAS to another, or as a + * kind of 'cache' to speed up mapping. Copy has an efficiency advantage over + * establishing equivalent new mappings, as internal resources are shared, and + * the kernel will pin the user memory only once. + */ +struct iommu_ioas_copy { + __u32 size; + __u32 flags; + __u32 dst_ioas_id; + __u32 src_ioas_id; + __aligned_u64 length; + __aligned_u64 dst_iova; + __aligned_u64 src_iova; +}; +#define IOMMU_IOAS_COPY _IO(IOMMUFD_TYPE, IOMMUFD_CMD_IOAS_COPY) + +/** + * struct iommu_ioas_unmap - ioctl(IOMMU_IOAS_UNMAP) + * @size: sizeof(struct iommu_ioas_unmap) + * @ioas_id: IOAS ID to change the mapping of + * @iova: IOVA to start the unmapping at + * @length: Number of bytes to unmap, and return back the bytes unmapped + * + * Unmap an IOVA range. The iova/length must be a superset of a previously + * mapped range used with IOMMU_IOAS_MAP or IOMMU_IOAS_COPY. Splitting or + * truncating ranges is not allowed. The values 0 to U64_MAX will unmap + * everything. + */ +struct iommu_ioas_unmap { + __u32 size; + __u32 ioas_id; + __aligned_u64 iova; + __aligned_u64 length; +}; +#define IOMMU_IOAS_UNMAP _IO(IOMMUFD_TYPE, IOMMUFD_CMD_IOAS_UNMAP) + +/** + * enum iommufd_option - ioctl(IOMMU_OPTION_RLIMIT_MODE) and + * ioctl(IOMMU_OPTION_HUGE_PAGES) + * @IOMMU_OPTION_RLIMIT_MODE: + * Change how RLIMIT_MEMLOCK accounting works. The caller must have privilege + * to invoke this. Value 0 (default) is user based accouting, 1 uses process + * based accounting. Global option, object_id must be 0 + * @IOMMU_OPTION_HUGE_PAGES: + * Value 1 (default) allows contiguous pages to be combined when generating + * iommu mappings. Value 0 disables combining, everything is mapped to + * PAGE_SIZE. This can be useful for benchmarking. This is a per-IOAS + * option, the object_id must be the IOAS ID. + */ +enum iommufd_option { + IOMMU_OPTION_RLIMIT_MODE = 0, + IOMMU_OPTION_HUGE_PAGES = 1, +}; + +/** + * enum iommufd_option_ops - ioctl(IOMMU_OPTION_OP_SET) and + * ioctl(IOMMU_OPTION_OP_GET) + * @IOMMU_OPTION_OP_SET: Set the option's value + * @IOMMU_OPTION_OP_GET: Get the option's value + */ +enum iommufd_option_ops { + IOMMU_OPTION_OP_SET = 0, + IOMMU_OPTION_OP_GET = 1, +}; + +/** + * struct iommu_option - iommu option multiplexer + * @size: sizeof(struct iommu_option) + * @option_id: One of enum iommufd_option + * @op: One of enum iommufd_option_ops + * @__reserved: Must be 0 + * @object_id: ID of the object if required + * @val64: Option value to set or value returned on get + * + * Change a simple option value. This multiplexor allows controlling options + * on objects. IOMMU_OPTION_OP_SET will load an option and IOMMU_OPTION_OP_GET + * will return the current value. + */ +struct iommu_option { + __u32 size; + __u32 option_id; + __u16 op; + __u16 __reserved; + __u32 object_id; + __aligned_u64 val64; +}; +#define IOMMU_OPTION _IO(IOMMUFD_TYPE, IOMMUFD_CMD_OPTION) + +/** + * enum iommufd_vfio_ioas_op - IOMMU_VFIO_IOAS_* ioctls + * @IOMMU_VFIO_IOAS_GET: Get the current compatibility IOAS + * @IOMMU_VFIO_IOAS_SET: Change the current compatibility IOAS + * @IOMMU_VFIO_IOAS_CLEAR: Disable VFIO compatibility + */ +enum iommufd_vfio_ioas_op { + IOMMU_VFIO_IOAS_GET = 0, + IOMMU_VFIO_IOAS_SET = 1, + IOMMU_VFIO_IOAS_CLEAR = 2, +}; + +/** + * struct iommu_vfio_ioas - ioctl(IOMMU_VFIO_IOAS) + * @size: sizeof(struct iommu_vfio_ioas) + * @ioas_id: For IOMMU_VFIO_IOAS_SET the input IOAS ID to set + * For IOMMU_VFIO_IOAS_GET will output the IOAS ID + * @op: One of enum iommufd_vfio_ioas_op + * @__reserved: Must be 0 + * + * The VFIO compatibility support uses a single ioas because VFIO APIs do not + * support the ID field. Set or Get the IOAS that VFIO compatibility will use. + * When VFIO_GROUP_SET_CONTAINER is used on an iommufd it will get the + * compatibility ioas, either by taking what is already set, or auto creating + * one. From then on VFIO will continue to use that ioas and is not effected by + * this ioctl. SET or CLEAR does not destroy any auto-created IOAS. + */ +struct iommu_vfio_ioas { + __u32 size; + __u32 ioas_id; + __u16 op; + __u16 __reserved; +}; +#define IOMMU_VFIO_IOAS _IO(IOMMUFD_TYPE, IOMMUFD_CMD_VFIO_IOAS) + +/** + * struct iommu_hwpt_alloc - ioctl(IOMMU_HWPT_ALLOC) + * @size: sizeof(struct iommu_hwpt_alloc) + * @flags: Must be 0 + * @dev_id: The device to allocate this HWPT for + * @pt_id: The IOAS to connect this HWPT to + * @out_hwpt_id: The ID of the new HWPT + * @__reserved: Must be 0 + * + * Explicitly allocate a hardware page table object. This is the same object + * type that is returned by iommufd_device_attach() and represents the + * underlying iommu driver's iommu_domain kernel object. + * + * A HWPT will be created with the IOVA mappings from the given IOAS. + */ +struct iommu_hwpt_alloc { + __u32 size; + __u32 flags; + __u32 dev_id; + __u32 pt_id; + __u32 out_hwpt_id; + __u32 __reserved; +}; +#define IOMMU_HWPT_ALLOC _IO(IOMMUFD_TYPE, IOMMUFD_CMD_HWPT_ALLOC) + +/** + * struct iommu_hw_info_vtd - Intel VT-d hardware information + * + * @flags: Must be 0 + * @__reserved: Must be 0 + * + * @cap_reg: Value of Intel VT-d capability register defined in VT-d spec + * section 11.4.2 Capability Register. + * @ecap_reg: Value of Intel VT-d capability register defined in VT-d spec + * section 11.4.3 Extended Capability Register. + * + * User needs to understand the Intel VT-d specification to decode the + * register value. + */ +struct iommu_hw_info_vtd { + __u32 flags; + __u32 __reserved; + __aligned_u64 cap_reg; + __aligned_u64 ecap_reg; +}; + +/** + * enum iommu_hw_info_type - IOMMU Hardware Info Types + * @IOMMU_HW_INFO_TYPE_NONE: Used by the drivers that do not report hardware + * info + * @IOMMU_HW_INFO_TYPE_INTEL_VTD: Intel VT-d iommu info type + */ +enum iommu_hw_info_type { + IOMMU_HW_INFO_TYPE_NONE, + IOMMU_HW_INFO_TYPE_INTEL_VTD, +}; + +/** + * struct iommu_hw_info - ioctl(IOMMU_GET_HW_INFO) + * @size: sizeof(struct iommu_hw_info) + * @flags: Must be 0 + * @dev_id: The device bound to the iommufd + * @data_len: Input the length of a user buffer in bytes. Output the length of + * data that kernel supports + * @data_uptr: User pointer to a user-space buffer used by the kernel to fill + * the iommu type specific hardware information data + * @out_data_type: Output the iommu hardware info type as defined in the enum + * iommu_hw_info_type. + * @__reserved: Must be 0 + * + * Query an iommu type specific hardware information data from an iommu behind + * a given device that has been bound to iommufd. This hardware info data will + * be used to sync capabilities between the virtual iommu and the physical + * iommu, e.g. a nested translation setup needs to check the hardware info, so + * a guest stage-1 page table can be compatible with the physical iommu. + * + * To capture an iommu type specific hardware information data, @data_uptr and + * its length @data_len must be provided. Trailing bytes will be zeroed if the + * user buffer is larger than the data that kernel has. Otherwise, kernel only + * fills the buffer using the given length in @data_len. If the ioctl succeeds, + * @data_len will be updated to the length that kernel actually supports, + * @out_data_type will be filled to decode the data filled in the buffer + * pointed by @data_uptr. Input @data_len == zero is allowed. + */ +struct iommu_hw_info { + __u32 size; + __u32 flags; + __u32 dev_id; + __u32 data_len; + __aligned_u64 data_uptr; + __u32 out_data_type; + __u32 __reserved; +}; +#define IOMMU_GET_HW_INFO _IO(IOMMUFD_TYPE, IOMMUFD_CMD_GET_HW_INFO) +#endif diff --git a/linux-headers/include/linux/ioprio.h b/linux-headers/include/linux/ioprio.h new file mode 100644 index 00000000000..9a51dd0c9b5 --- /dev/null +++ b/linux-headers/include/linux/ioprio.h @@ -0,0 +1,127 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _LINUX_IOPRIO_H +#define _LINUX_IOPRIO_H + +#include +#include + +/* + * Gives us 8 prio classes with 13-bits of data for each class + */ +#define IOPRIO_CLASS_SHIFT 13 +#define IOPRIO_NR_CLASSES 8 +#define IOPRIO_CLASS_MASK (IOPRIO_NR_CLASSES - 1) +#define IOPRIO_PRIO_MASK ((1UL << IOPRIO_CLASS_SHIFT) - 1) + +#define IOPRIO_PRIO_CLASS(ioprio) \ + (((ioprio) >> IOPRIO_CLASS_SHIFT) & IOPRIO_CLASS_MASK) +#define IOPRIO_PRIO_DATA(ioprio) ((ioprio) & IOPRIO_PRIO_MASK) + +/* + * These are the io priority classes as implemented by the BFQ and mq-deadline + * schedulers. RT is the realtime class, it always gets premium service. For + * ATA disks supporting NCQ IO priority, RT class IOs will be processed using + * high priority NCQ commands. BE is the best-effort scheduling class, the + * default for any process. IDLE is the idle scheduling class, it is only + * served when no one else is using the disk. + */ +enum { + IOPRIO_CLASS_NONE = 0, + IOPRIO_CLASS_RT = 1, + IOPRIO_CLASS_BE = 2, + IOPRIO_CLASS_IDLE = 3, + + /* Special class to indicate an invalid ioprio value */ + IOPRIO_CLASS_INVALID = 7, +}; + +/* + * The RT and BE priority classes both support up to 8 priority levels that + * can be specified using the lower 3-bits of the priority data. + */ +#define IOPRIO_LEVEL_NR_BITS 3 +#define IOPRIO_NR_LEVELS (1 << IOPRIO_LEVEL_NR_BITS) +#define IOPRIO_LEVEL_MASK (IOPRIO_NR_LEVELS - 1) +#define IOPRIO_PRIO_LEVEL(ioprio) ((ioprio) & IOPRIO_LEVEL_MASK) + +#define IOPRIO_BE_NR IOPRIO_NR_LEVELS + +/* + * Possible values for the "which" argument of the ioprio_get() and + * ioprio_set() system calls (see "man ioprio_set"). + */ +enum { + IOPRIO_WHO_PROCESS = 1, + IOPRIO_WHO_PGRP, + IOPRIO_WHO_USER, +}; + +/* + * Fallback BE class priority level. + */ +#define IOPRIO_NORM 4 +#define IOPRIO_BE_NORM IOPRIO_NORM + +/* + * The 10 bits between the priority class and the priority level are used to + * optionally define I/O hints for any combination of I/O priority class and + * level. Depending on the kernel configuration, I/O scheduler being used and + * the target I/O device being used, hints can influence how I/Os are processed + * without affecting the I/O scheduling ordering defined by the I/O priority + * class and level. + */ +#define IOPRIO_HINT_SHIFT IOPRIO_LEVEL_NR_BITS +#define IOPRIO_HINT_NR_BITS 10 +#define IOPRIO_NR_HINTS (1 << IOPRIO_HINT_NR_BITS) +#define IOPRIO_HINT_MASK (IOPRIO_NR_HINTS - 1) +#define IOPRIO_PRIO_HINT(ioprio) \ + (((ioprio) >> IOPRIO_HINT_SHIFT) & IOPRIO_HINT_MASK) + +/* + * I/O hints. + */ +enum { + /* No hint */ + IOPRIO_HINT_NONE = 0, + + /* + * Device command duration limits: indicate to the device a desired + * duration limit for the commands that will be used to process an I/O. + * These will currently only be effective for SCSI and ATA devices that + * support the command duration limits feature. If this feature is + * enabled, then the commands issued to the device to process an I/O with + * one of these hints set will have the duration limit index (dld field) + * set to the value of the hint. + */ + IOPRIO_HINT_DEV_DURATION_LIMIT_1 = 1, + IOPRIO_HINT_DEV_DURATION_LIMIT_2 = 2, + IOPRIO_HINT_DEV_DURATION_LIMIT_3 = 3, + IOPRIO_HINT_DEV_DURATION_LIMIT_4 = 4, + IOPRIO_HINT_DEV_DURATION_LIMIT_5 = 5, + IOPRIO_HINT_DEV_DURATION_LIMIT_6 = 6, + IOPRIO_HINT_DEV_DURATION_LIMIT_7 = 7, +}; + +#define IOPRIO_BAD_VALUE(val, max) ((val) < 0 || (val) >= (max)) + +/* + * Return an I/O priority value based on a class, a level and a hint. + */ +static __always_inline __u16 ioprio_value(int prioclass, int priolevel, + int priohint) +{ + if (IOPRIO_BAD_VALUE(prioclass, IOPRIO_NR_CLASSES) || + IOPRIO_BAD_VALUE(priolevel, IOPRIO_NR_LEVELS) || + IOPRIO_BAD_VALUE(priohint, IOPRIO_NR_HINTS)) + return IOPRIO_CLASS_INVALID << IOPRIO_CLASS_SHIFT; + + return (prioclass << IOPRIO_CLASS_SHIFT) | + (priohint << IOPRIO_HINT_SHIFT) | priolevel; +} + +#define IOPRIO_PRIO_VALUE(prioclass, priolevel) \ + ioprio_value(prioclass, priolevel, IOPRIO_HINT_NONE) +#define IOPRIO_PRIO_VALUE_HINT(prioclass, priolevel, priohint) \ + ioprio_value(prioclass, priolevel, priohint) + +#endif /* _LINUX_IOPRIO_H */ diff --git a/linux-headers/include/linux/ip.h b/linux-headers/include/linux/ip.h index f4ecd2fab84..9b4dd89ebec 100644 --- a/linux-headers/include/linux/ip.h +++ b/linux-headers/include/linux/ip.h @@ -18,6 +18,7 @@ #ifndef _LINUX_IP_H #define _LINUX_IP_H #include +#include #include #define IPTOS_TOS_MASK 0x1E @@ -100,8 +101,10 @@ struct iphdr { __u8 ttl; __u8 protocol; __sum16 check; - __be32 saddr; - __be32 daddr; + __struct_group(/* no tag */, addrs, /* no attrs */, + __be32 saddr; + __be32 daddr; + ); /*The options start here. */ }; @@ -112,13 +115,13 @@ struct ip_auth_hdr { __be16 reserved; __be32 spi; __be32 seq_no; /* Sequence number */ - __u8 auth_data[0]; /* Variable len but >=4. Mind the 64 bit alignment! */ + __u8 auth_data[]; /* Variable len but >=4. Mind the 64 bit alignment! */ }; struct ip_esp_hdr { __be32 spi; __be32 seq_no; /* Sequence number */ - __u8 enc_data[0]; /* Variable len but >=8. Mind the 64 bit alignment! */ + __u8 enc_data[]; /* Variable len but >=8. Mind the 64 bit alignment! */ }; struct ip_comp_hdr { @@ -169,6 +172,7 @@ enum IPV4_DEVCONF_DROP_UNICAST_IN_L2_MULTICAST, IPV4_DEVCONF_DROP_GRATUITOUS_ARP, IPV4_DEVCONF_BC_FORWARDING, + IPV4_DEVCONF_ARP_EVICT_NOCARRIER, __IPV4_DEVCONF_MAX }; diff --git a/linux-headers/include/linux/ip_vs.h b/linux-headers/include/linux/ip_vs.h index 4102ddcb4e1..1ed234e7f25 100644 --- a/linux-headers/include/linux/ip_vs.h +++ b/linux-headers/include/linux/ip_vs.h @@ -254,7 +254,7 @@ struct ip_vs_get_dests { unsigned int num_dests; /* the real servers */ - struct ip_vs_dest_entry entrytable[0]; + struct ip_vs_dest_entry entrytable[]; }; @@ -264,7 +264,7 @@ struct ip_vs_get_services { unsigned int num_services; /* service table */ - struct ip_vs_service_entry entrytable[0]; + struct ip_vs_service_entry entrytable[]; }; diff --git a/linux-headers/include/linux/ipmi.h b/linux-headers/include/linux/ipmi.h index e155c5a74ee..19499647b7f 100644 --- a/linux-headers/include/linux/ipmi.h +++ b/linux-headers/include/linux/ipmi.h @@ -80,6 +80,20 @@ struct ipmi_ipmb_addr { unsigned char lun; }; +/* + * Used for messages received directly from an IPMB that have not gone + * through a MC. This is for systems that sit right on an IPMB so + * they can receive commands and respond to them. + */ +#define IPMI_IPMB_DIRECT_ADDR_TYPE 0x81 +struct ipmi_ipmb_direct_addr { + int addr_type; + short channel; + unsigned char slave_addr; + unsigned char rs_lun; + unsigned char rq_lun; +}; + /* * A LAN Address. This is an address to/from a LAN interface bridged * by the BMC, not an address actually out on the LAN. @@ -158,7 +172,7 @@ struct kernel_ipmi_msg { * is used for the receive in-kernel interface and in the receive * IOCTL. * - * The "IPMI_RESPONSE_RESPNOSE_TYPE" is a little strange sounding, but + * The "IPMI_RESPONSE_RESPONSE_TYPE" is a little strange sounding, but * it allows you to get the message results when you send a response * message. */ diff --git a/linux-headers/include/linux/ipmi_ssif_bmc.h b/linux-headers/include/linux/ipmi_ssif_bmc.h new file mode 100644 index 00000000000..a13f10d45e4 --- /dev/null +++ b/linux-headers/include/linux/ipmi_ssif_bmc.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note*/ +/* + * Copyright (c) 2022, Ampere Computing LLC. + */ + +#ifndef _LINUX_IPMI_SSIF_BMC_H +#define _LINUX_IPMI_SSIF_BMC_H + +#include + +/* Max length of ipmi ssif message included netfn and cmd field */ +#define IPMI_SSIF_PAYLOAD_MAX 254 +struct ipmi_ssif_msg { + unsigned int len; + __u8 payload[IPMI_SSIF_PAYLOAD_MAX]; +}; + +#endif /* _LINUX_IPMI_SSIF_BMC_H */ diff --git a/linux-headers/include/linux/ipv6.h b/linux-headers/include/linux/ipv6.h index b69e8a46aaa..4724bbb2b79 100644 --- a/linux-headers/include/linux/ipv6.h +++ b/linux-headers/include/linux/ipv6.h @@ -4,6 +4,7 @@ #include #include +#include #include #include @@ -80,7 +81,7 @@ struct ipv6_opt_hdr { struct rt0_hdr { struct ipv6_rt_hdr rt_hdr; __u32 reserved; - struct in6_addr addr[0]; + struct in6_addr addr[]; #define rt0_type rt_hdr.type }; @@ -130,8 +131,10 @@ struct ipv6hdr { __u8 nexthdr; __u8 hop_limit; - struct in6_addr saddr; - struct in6_addr daddr; + __struct_group(/* no tag */, addrs, /* no attrs */, + struct in6_addr saddr; + struct in6_addr daddr; + ); }; @@ -189,6 +192,13 @@ enum { DEVCONF_ACCEPT_RA_RT_INFO_MIN_PLEN, DEVCONF_NDISC_TCLASS, DEVCONF_RPL_SEG_ENABLED, + DEVCONF_RA_DEFRTR_METRIC, + DEVCONF_IOAM6_ENABLED, + DEVCONF_IOAM6_ID, + DEVCONF_IOAM6_ID_WIDE, + DEVCONF_NDISC_EVICT_NOCARRIER, + DEVCONF_ACCEPT_UNTRACKED_NA, + DEVCONF_ACCEPT_RA_MIN_LFT, DEVCONF_MAX }; diff --git a/linux-headers/include/linux/ipx.h b/linux-headers/include/linux/ipx.h deleted file mode 100644 index 3168137adae..00000000000 --- a/linux-headers/include/linux/ipx.h +++ /dev/null @@ -1,87 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _IPX_H_ -#define _IPX_H_ -#include /* for compatibility with glibc netipx/ipx.h */ -#include -#include -#include -#define IPX_NODE_LEN 6 -#define IPX_MTU 576 - -#if __UAPI_DEF_SOCKADDR_IPX -struct sockaddr_ipx { - __kernel_sa_family_t sipx_family; - __be16 sipx_port; - __be32 sipx_network; - unsigned char sipx_node[IPX_NODE_LEN]; - __u8 sipx_type; - unsigned char sipx_zero; /* 16 byte fill */ -}; -#endif /* __UAPI_DEF_SOCKADDR_IPX */ - -/* - * So we can fit the extra info for SIOCSIFADDR into the address nicely - */ -#define sipx_special sipx_port -#define sipx_action sipx_zero -#define IPX_DLTITF 0 -#define IPX_CRTITF 1 - -#if __UAPI_DEF_IPX_ROUTE_DEFINITION -struct ipx_route_definition { - __be32 ipx_network; - __be32 ipx_router_network; - unsigned char ipx_router_node[IPX_NODE_LEN]; -}; -#endif /* __UAPI_DEF_IPX_ROUTE_DEFINITION */ - -#if __UAPI_DEF_IPX_INTERFACE_DEFINITION -struct ipx_interface_definition { - __be32 ipx_network; - unsigned char ipx_device[16]; - unsigned char ipx_dlink_type; -#define IPX_FRAME_NONE 0 -#define IPX_FRAME_SNAP 1 -#define IPX_FRAME_8022 2 -#define IPX_FRAME_ETHERII 3 -#define IPX_FRAME_8023 4 -#define IPX_FRAME_TR_8022 5 /* obsolete */ - unsigned char ipx_special; -#define IPX_SPECIAL_NONE 0 -#define IPX_PRIMARY 1 -#define IPX_INTERNAL 2 - unsigned char ipx_node[IPX_NODE_LEN]; -}; -#endif /* __UAPI_DEF_IPX_INTERFACE_DEFINITION */ - -#if __UAPI_DEF_IPX_CONFIG_DATA -struct ipx_config_data { - unsigned char ipxcfg_auto_select_primary; - unsigned char ipxcfg_auto_create_interfaces; -}; -#endif /* __UAPI_DEF_IPX_CONFIG_DATA */ - -/* - * OLD Route Definition for backward compatibility. - */ - -#if __UAPI_DEF_IPX_ROUTE_DEF -struct ipx_route_def { - __be32 ipx_network; - __be32 ipx_router_network; -#define IPX_ROUTE_NO_ROUTER 0 - unsigned char ipx_router_node[IPX_NODE_LEN]; - unsigned char ipx_device[16]; - unsigned short ipx_flags; -#define IPX_RT_SNAP 8 -#define IPX_RT_8022 4 -#define IPX_RT_BLUEBOOK 2 -#define IPX_RT_ROUTED 1 -}; -#endif /* __UAPI_DEF_IPX_ROUTE_DEF */ - -#define SIOCAIPXITFCRT (SIOCPROTOPRIVATE) -#define SIOCAIPXPRISLT (SIOCPROTOPRIVATE + 1) -#define SIOCIPXCFGDATA (SIOCPROTOPRIVATE + 2) -#define SIOCIPXNCPCONN (SIOCPROTOPRIVATE + 3) -#endif /* _IPX_H_ */ diff --git a/linux-headers/include/linux/iso_fs.h b/linux-headers/include/linux/iso_fs.h index a2555176f6d..758178f5b52 100644 --- a/linux-headers/include/linux/iso_fs.h +++ b/linux-headers/include/linux/iso_fs.h @@ -137,7 +137,7 @@ struct iso_path_table{ __u8 name_len[2]; /* 721 */ __u8 extent[4]; /* 731 */ __u8 parent[2]; /* 721 */ - char name[0]; + char name[]; } __attribute__((packed)); /* high sierra is identical to iso, except that the date is only 6 bytes, and @@ -154,7 +154,7 @@ struct iso_directory_record { __u8 interleave [ISODCL (28, 28)]; /* 711 */ __u8 volume_sequence_number [ISODCL (29, 32)]; /* 723 */ __u8 name_len [ISODCL (33, 33)]; /* 711 */ - char name [0]; + char name []; } __attribute__((packed)); #define ISOFS_BLOCK_BITS 11 diff --git a/linux-headers/include/linux/isst_if.h b/linux-headers/include/linux/isst_if.h index ba078f8e9ad..0df1a1c3caf 100644 --- a/linux-headers/include/linux/isst_if.h +++ b/linux-headers/include/linux/isst_if.h @@ -163,10 +163,313 @@ struct isst_if_msr_cmds { struct isst_if_msr_cmd msr_cmd[1]; }; +/** + * struct isst_core_power - Structure to get/set core_power feature + * @get_set: 0: Get, 1: Set + * @socket_id: Socket/package id + * @power_domain: Power Domain id + * @enable: Feature enable status + * @priority_type: Priority type for the feature (ordered/proportional) + * + * Structure to get/set core_power feature state using IOCTL + * ISST_IF_CORE_POWER_STATE. + */ +struct isst_core_power { + __u8 get_set; + __u8 socket_id; + __u8 power_domain_id; + __u8 enable; + __u8 supported; + __u8 priority_type; +}; + +/** + * struct isst_clos_param - Structure to get/set clos praram + * @get_set: 0: Get, 1: Set + * @socket_id: Socket/package id + * @power_domain: Power Domain id + * clos: Clos ID for the parameters + * min_freq_mhz: Minimum frequency in MHz + * max_freq_mhz: Maximum frequency in MHz + * prop_prio: Proportional priority from 0-15 + * + * Structure to get/set per clos property using IOCTL + * ISST_IF_CLOS_PARAM. + */ +struct isst_clos_param { + __u8 get_set; + __u8 socket_id; + __u8 power_domain_id; + __u8 clos; + __u16 min_freq_mhz; + __u16 max_freq_mhz; + __u8 prop_prio; +}; + +/** + * struct isst_if_clos_assoc - Structure to assign clos to a CPU + * @socket_id: Socket/package id + * @power_domain: Power Domain id + * @logical_cpu: CPU number + * @clos: Clos ID to assign to the logical CPU + * + * Structure to get/set core_power feature. + */ +struct isst_if_clos_assoc { + __u8 socket_id; + __u8 power_domain_id; + __u16 logical_cpu; + __u16 clos; +}; + +/** + * struct isst_if_clos_assoc_cmds - Structure to assign clos to CPUs + * @cmd_count: Number of cmds (cpus) in this request + * @get_set: Request is for get or set + * @punit_cpu_map: Set to 1 if the CPU number is punit numbering not + * Linux CPU number + * + * Structure used to get/set associate CPUs to clos using IOCTL + * ISST_IF_CLOS_ASSOC. + */ +struct isst_if_clos_assoc_cmds { + __u16 cmd_count; + __u16 get_set; + __u16 punit_cpu_map; + struct isst_if_clos_assoc assoc_info[1]; +}; + +/** + * struct isst_tpmi_instance_count - Get number of TPMI instances per socket + * @socket_id: Socket/package id + * @count: Number of instances + * @valid_mask: Mask of instances as there can be holes + * + * Structure used to get TPMI instances information using + * IOCTL ISST_IF_COUNT_TPMI_INSTANCES. + */ +struct isst_tpmi_instance_count { + __u8 socket_id; + __u8 count; + __u16 valid_mask; +}; + +/** + * struct isst_perf_level_info - Structure to get information on SST-PP levels + * @socket_id: Socket/package id + * @power_domain: Power Domain id + * @logical_cpu: CPU number + * @clos: Clos ID to assign to the logical CPU + * @max_level: Maximum performance level supported by the platform + * @feature_rev: The feature revision for SST-PP supported by the platform + * @level_mask: Mask of supported performance levels + * @current_level: Current performance level + * @feature_state: SST-BF and SST-TF (enabled/disabled) status at current level + * @locked: SST-PP performance level change is locked/unlocked + * @enabled: SST-PP feature is enabled or not + * @sst-tf_support: SST-TF support status at this level + * @sst-bf_support: SST-BF support status at this level + * + * Structure to get SST-PP details using IOCTL ISST_IF_PERF_LEVELS. + */ +struct isst_perf_level_info { + __u8 socket_id; + __u8 power_domain_id; + __u8 max_level; + __u8 feature_rev; + __u8 level_mask; + __u8 current_level; + __u8 feature_state; + __u8 locked; + __u8 enabled; + __u8 sst_tf_support; + __u8 sst_bf_support; +}; + +/** + * struct isst_perf_level_control - Structure to set SST-PP level + * @socket_id: Socket/package id + * @power_domain: Power Domain id + * @level: level to set + * + * Structure used change SST-PP level using IOCTL ISST_IF_PERF_SET_LEVEL. + */ +struct isst_perf_level_control { + __u8 socket_id; + __u8 power_domain_id; + __u8 level; +}; + +/** + * struct isst_perf_feature_control - Structure to activate SST-BF/SST-TF + * @socket_id: Socket/package id + * @power_domain: Power Domain id + * @feature: bit 0 = SST-BF state, bit 1 = SST-TF state + * + * Structure used to enable SST-BF/SST-TF using IOCTL ISST_IF_PERF_SET_FEATURE. + */ +struct isst_perf_feature_control { + __u8 socket_id; + __u8 power_domain_id; + __u8 feature; +}; + +#define TRL_MAX_BUCKETS 8 +#define TRL_MAX_LEVELS 6 + +/** + * struct isst_perf_level_data_info - Structure to get SST-PP level details + * @socket_id: Socket/package id + * @power_domain: Power Domain id + * @level: SST-PP level for which caller wants to get information + * @tdp_ratio: TDP Ratio + * @base_freq_mhz: Base frequency in MHz + * @base_freq_avx2_mhz: AVX2 Base frequency in MHz + * @base_freq_avx512_mhz: AVX512 base frequency in MHz + * @base_freq_amx_mhz: AMX base frequency in MHz + * @thermal_design_power_w: Thermal design (TDP) power + * @tjunction_max_c: Max junction temperature + * @max_memory_freq_mhz: Max memory frequency in MHz + * @cooling_type: Type of cooling is used + * @p0_freq_mhz: core maximum frequency + * @p1_freq_mhz: Core TDP frequency + * @pn_freq_mhz: Core maximum efficiency frequency + * @pm_freq_mhz: Core minimum frequency + * @p0_fabric_freq_mhz: Fabric (Uncore) maximum frequency + * @p1_fabric_freq_mhz: Fabric (Uncore) TDP frequency + * @pn_fabric_freq_mhz: Fabric (Uncore) minimum efficiency frequency + * @pm_fabric_freq_mhz: Fabric (Uncore) minimum frequency + * @max_buckets: Maximum trl buckets + * @max_trl_levels: Maximum trl levels + * @bucket_core_counts[TRL_MAX_BUCKETS]: Number of cores per bucket + * @trl_freq_mhz[TRL_MAX_LEVELS][TRL_MAX_BUCKETS]: maximum frequency + * for a bucket and trl level + * + * Structure used to get information on frequencies and TDP for a SST-PP + * level using ISST_IF_GET_PERF_LEVEL_INFO. + */ +struct isst_perf_level_data_info { + __u8 socket_id; + __u8 power_domain_id; + __u16 level; + __u16 tdp_ratio; + __u16 base_freq_mhz; + __u16 base_freq_avx2_mhz; + __u16 base_freq_avx512_mhz; + __u16 base_freq_amx_mhz; + __u16 thermal_design_power_w; + __u16 tjunction_max_c; + __u16 max_memory_freq_mhz; + __u16 cooling_type; + __u16 p0_freq_mhz; + __u16 p1_freq_mhz; + __u16 pn_freq_mhz; + __u16 pm_freq_mhz; + __u16 p0_fabric_freq_mhz; + __u16 p1_fabric_freq_mhz; + __u16 pn_fabric_freq_mhz; + __u16 pm_fabric_freq_mhz; + __u16 max_buckets; + __u16 max_trl_levels; + __u16 bucket_core_counts[TRL_MAX_BUCKETS]; + __u16 trl_freq_mhz[TRL_MAX_LEVELS][TRL_MAX_BUCKETS]; +}; + +/** + * struct isst_perf_level_cpu_mask - Structure to get SST-PP level CPU mask + * @socket_id: Socket/package id + * @power_domain: Power Domain id + * @level: SST-PP level for which caller wants to get information + * @punit_cpu_map: Set to 1 if the CPU number is punit numbering not + * Linux CPU number. If 0 CPU buffer is copied to user space + * supplied cpu_buffer of size cpu_buffer_size. Punit + * cpu mask is copied to "mask" field. + * @mask: cpu mask for this PP level (punit CPU numbering) + * @cpu_buffer_size: size of cpu_buffer also used to return the copied CPU + * buffer size. + * @cpu_buffer: Buffer to copy CPU mask when punit_cpu_map is 0 + * + * Structure used to get cpumask for a SST-PP level using + * IOCTL ISST_IF_GET_PERF_LEVEL_CPU_MASK. Also used to get CPU mask for + * IOCTL ISST_IF_GET_BASE_FREQ_CPU_MASK for SST-BF. + */ +struct isst_perf_level_cpu_mask { + __u8 socket_id; + __u8 power_domain_id; + __u8 level; + __u8 punit_cpu_map; + __u64 mask; + __u16 cpu_buffer_size; + __s8 cpu_buffer[1]; +}; + +/** + * struct isst_base_freq_info - Structure to get SST-BF frequencies + * @socket_id: Socket/package id + * @power_domain: Power Domain id + * @level: SST-PP level for which caller wants to get information + * @high_base_freq_mhz: High priority CPU base frequency + * @low_base_freq_mhz: Low priority CPU base frequency + * @tjunction_max_c: Max junction temperature + * @thermal_design_power_w: Thermal design power in watts + * + * Structure used to get SST-BF information using + * IOCTL ISST_IF_GET_BASE_FREQ_INFO. + */ +struct isst_base_freq_info { + __u8 socket_id; + __u8 power_domain_id; + __u16 level; + __u16 high_base_freq_mhz; + __u16 low_base_freq_mhz; + __u16 tjunction_max_c; + __u16 thermal_design_power_w; +}; + +/** + * struct isst_turbo_freq_info - Structure to get SST-TF frequencies + * @socket_id: Socket/package id + * @power_domain: Power Domain id + * @level: SST-PP level for which caller wants to get information + * @max_clip_freqs: Maximum number of low priority core clipping frequencies + * @lp_clip_freq_mhz: Clip frequencies per trl level + * @bucket_core_counts: Maximum number of cores for a bucket + * @trl_freq_mhz: Frequencies per trl level for each bucket + * + * Structure used to get SST-TF information using + * IOCTL ISST_IF_GET_TURBO_FREQ_INFO. + */ +struct isst_turbo_freq_info { + __u8 socket_id; + __u8 power_domain_id; + __u16 level; + __u16 max_clip_freqs; + __u16 max_buckets; + __u16 max_trl_levels; + __u16 lp_clip_freq_mhz[TRL_MAX_LEVELS]; + __u16 bucket_core_counts[TRL_MAX_BUCKETS]; + __u16 trl_freq_mhz[TRL_MAX_LEVELS][TRL_MAX_BUCKETS]; +}; + #define ISST_IF_MAGIC 0xFE #define ISST_IF_GET_PLATFORM_INFO _IOR(ISST_IF_MAGIC, 0, struct isst_if_platform_info *) #define ISST_IF_GET_PHY_ID _IOWR(ISST_IF_MAGIC, 1, struct isst_if_cpu_map *) #define ISST_IF_IO_CMD _IOW(ISST_IF_MAGIC, 2, struct isst_if_io_regs *) #define ISST_IF_MBOX_COMMAND _IOWR(ISST_IF_MAGIC, 3, struct isst_if_mbox_cmds *) #define ISST_IF_MSR_COMMAND _IOWR(ISST_IF_MAGIC, 4, struct isst_if_msr_cmds *) + +#define ISST_IF_COUNT_TPMI_INSTANCES _IOR(ISST_IF_MAGIC, 5, struct isst_tpmi_instance_count *) +#define ISST_IF_CORE_POWER_STATE _IOWR(ISST_IF_MAGIC, 6, struct isst_core_power *) +#define ISST_IF_CLOS_PARAM _IOWR(ISST_IF_MAGIC, 7, struct isst_clos_param *) +#define ISST_IF_CLOS_ASSOC _IOWR(ISST_IF_MAGIC, 8, struct isst_if_clos_assoc_cmds *) + +#define ISST_IF_PERF_LEVELS _IOWR(ISST_IF_MAGIC, 9, struct isst_perf_level_info *) +#define ISST_IF_PERF_SET_LEVEL _IOW(ISST_IF_MAGIC, 10, struct isst_perf_level_control *) +#define ISST_IF_PERF_SET_FEATURE _IOW(ISST_IF_MAGIC, 11, struct isst_perf_feature_control *) +#define ISST_IF_GET_PERF_LEVEL_INFO _IOR(ISST_IF_MAGIC, 12, struct isst_perf_level_data_info *) +#define ISST_IF_GET_PERF_LEVEL_CPU_MASK _IOR(ISST_IF_MAGIC, 13, struct isst_perf_level_cpu_mask *) +#define ISST_IF_GET_BASE_FREQ_INFO _IOR(ISST_IF_MAGIC, 14, struct isst_base_freq_info *) +#define ISST_IF_GET_BASE_FREQ_CPU_MASK _IOR(ISST_IF_MAGIC, 15, struct isst_perf_level_cpu_mask *) +#define ISST_IF_GET_TURBO_FREQ_INFO _IOR(ISST_IF_MAGIC, 16, struct isst_turbo_freq_info *) + #endif diff --git a/linux-headers/include/linux/jffs2.h b/linux-headers/include/linux/jffs2.h index 784ba0b9690..637ee4a793c 100644 --- a/linux-headers/include/linux/jffs2.h +++ b/linux-headers/include/linux/jffs2.h @@ -123,7 +123,7 @@ struct jffs2_raw_dirent __u8 unused[2]; jint32_t node_crc; jint32_t name_crc; - __u8 name[0]; + __u8 name[]; }; /* The JFFS2 raw inode structure: Used for storage on physical media. */ @@ -155,7 +155,7 @@ struct jffs2_raw_inode jint16_t flags; /* See JFFS2_INO_FLAG_* */ jint32_t data_crc; /* CRC for the (compressed) data. */ jint32_t node_crc; /* CRC for the raw inode (excluding data) */ - __u8 data[0]; + __u8 data[]; }; struct jffs2_raw_xattr { @@ -170,7 +170,7 @@ struct jffs2_raw_xattr { jint16_t value_len; jint32_t data_crc; jint32_t node_crc; - __u8 data[0]; + __u8 data[]; } __attribute__((packed)); struct jffs2_raw_xref @@ -196,7 +196,7 @@ struct jffs2_raw_summary jint32_t padded; /* sum of the size of padding nodes */ jint32_t sum_crc; /* summary information crc */ jint32_t node_crc; /* node crc */ - jint32_t sum[0]; /* inode summary info */ + jint32_t sum[]; /* inode summary info */ }; union jffs2_node_union diff --git a/linux-headers/include/linux/kcov.h b/linux-headers/include/linux/kcov.h index b02a4ef5ea8..7aa993274a5 100644 --- a/linux-headers/include/linux/kcov.h +++ b/linux-headers/include/linux/kcov.h @@ -13,7 +13,7 @@ struct kcov_remote_arg { __u32 area_size; /* Length of coverage buffer in words */ __u32 num_handles; /* Size of handles array */ __aligned_u64 common_handle; - __aligned_u64 handles[0]; + __aligned_u64 handles[]; }; #define KCOV_REMOTE_MAX_HANDLES 0x100 diff --git a/linux-headers/include/linux/kd.h b/linux-headers/include/linux/kd.h index bacb8cb3a48..7d0807e1fc3 100644 --- a/linux-headers/include/linux/kd.h +++ b/linux-headers/include/linux/kd.h @@ -161,19 +161,25 @@ struct console_font_op { unsigned int flags; /* KD_FONT_FLAG_* */ unsigned int width, height; /* font size */ unsigned int charcount; - unsigned char *data; /* font data with height fixed to 32 */ + unsigned char *data; /* font data with vpitch fixed to 32 for + * KD_FONT_OP_SET/GET + */ }; struct console_font { unsigned int width, height; /* font size */ unsigned int charcount; - unsigned char *data; /* font data with height fixed to 32 */ + unsigned char *data; /* font data with vpitch fixed to 32 for + * KD_FONT_OP_SET/GET + */ }; #define KD_FONT_OP_SET 0 /* Set font */ #define KD_FONT_OP_GET 1 /* Get font */ #define KD_FONT_OP_SET_DEFAULT 2 /* Set font to default, data points to name / NULL */ -#define KD_FONT_OP_COPY 3 /* Copy from another console */ +#define KD_FONT_OP_COPY 3 /* Obsolete, do not use */ +#define KD_FONT_OP_SET_TALL 4 /* Set font with vpitch = height */ +#define KD_FONT_OP_GET_TALL 5 /* Get font with vpitch = height */ #define KD_FONT_FLAG_DONT_RECALC 1 /* Don't recalculate hw charcell size [compat] */ diff --git a/linux-headers/include/linux/kexec.h b/linux-headers/include/linux/kexec.h index 8ec4ca47559..d0a571c0f70 100644 --- a/linux-headers/include/linux/kexec.h +++ b/linux-headers/include/linux/kexec.h @@ -12,6 +12,7 @@ /* kexec flags for different usage scenarios */ #define KEXEC_ON_CRASH 0x00000001 #define KEXEC_PRESERVE_CONTEXT 0x00000002 +#define KEXEC_UPDATE_ELFCOREHDR 0x00000004 #define KEXEC_ARCH_MASK 0xffff0000 /* @@ -42,6 +43,8 @@ #define KEXEC_ARCH_MIPS_LE (10 << 16) #define KEXEC_ARCH_MIPS ( 8 << 16) #define KEXEC_ARCH_AARCH64 (183 << 16) +#define KEXEC_ARCH_RISCV (243 << 16) +#define KEXEC_ARCH_LOONGARCH (258 << 16) /* The artificial cap on the number of segments passed to kexec_load. */ #define KEXEC_SEGMENT_MAX 16 @@ -52,9 +55,9 @@ */ struct kexec_segment { const void *buf; - size_t bufsz; + __kernel_size_t bufsz; const void *mem; - size_t memsz; + __kernel_size_t memsz; }; diff --git a/linux-headers/include/linux/keyboard.h b/linux-headers/include/linux/keyboard.h index b60dd8fdece..764af8a74b3 100644 --- a/linux-headers/include/linux/keyboard.h +++ b/linux-headers/include/linux/keyboard.h @@ -27,7 +27,6 @@ #define MAX_NR_FUNC 256 /* max nr of strings assigned to keys */ #define KT_LATIN 0 /* we depend on this being zero */ -#define KT_LETTER 11 /* symbol that can be acted upon by CapsLock */ #define KT_FN 1 #define KT_SPEC 2 #define KT_PAD 3 @@ -38,6 +37,7 @@ #define KT_META 8 #define KT_ASCII 9 #define KT_LOCK 10 +#define KT_LETTER 11 /* symbol that can be acted upon by CapsLock */ #define KT_SLOCK 12 #define KT_DEAD2 13 #define KT_BRL 14 diff --git a/linux-headers/include/linux/kfd_ioctl.h b/linux-headers/include/linux/kfd_ioctl.h index 695b606da4b..eeb2fdcbdcb 100644 --- a/linux-headers/include/linux/kfd_ioctl.h +++ b/linux-headers/include/linux/kfd_ioctl.h @@ -29,9 +29,20 @@ /* * - 1.1 - initial version * - 1.3 - Add SMI events support + * - 1.4 - Indicate new SRAM EDC bit in device properties + * - 1.5 - Add SVM API + * - 1.6 - Query clear flags in SVM get_attr API + * - 1.7 - Checkpoint Restore (CRIU) API + * - 1.8 - CRIU - Support for SDMA transfers with GTT BOs + * - 1.9 - Add available memory ioctl + * - 1.10 - Add SMI profiler event log + * - 1.11 - Add unified memory for ctx save/restore area + * - 1.12 - Add DMA buf export ioctl + * - 1.13 - Add debugger API + * - 1.14 - Update kfd_event_data */ #define KFD_IOCTL_MAJOR_VERSION 1 -#define KFD_IOCTL_MINOR_VERSION 3 +#define KFD_IOCTL_MINOR_VERSION 14 struct kfd_ioctl_get_version_args { __u32 major_version; /* from KFD */ @@ -95,6 +106,38 @@ struct kfd_ioctl_get_queue_wave_state_args { __u32 pad; }; +struct kfd_ioctl_get_available_memory_args { + __u64 available; /* from KFD */ + __u32 gpu_id; /* to KFD */ + __u32 pad; +}; + +struct kfd_dbg_device_info_entry { + __u64 exception_status; + __u64 lds_base; + __u64 lds_limit; + __u64 scratch_base; + __u64 scratch_limit; + __u64 gpuvm_base; + __u64 gpuvm_limit; + __u32 gpu_id; + __u32 location_id; + __u32 vendor_id; + __u32 device_id; + __u32 revision_id; + __u32 subsystem_vendor_id; + __u32 subsystem_device_id; + __u32 fw_version; + __u32 gfx_target_version; + __u32 simd_count; + __u32 max_waves_per_simd; + __u32 array_count; + __u32 simd_arrays_per_engine; + __u32 num_xcc; + __u32 capability; + __u32 debug_prop; +}; + /* For kfd_ioctl_set_memory_policy_args.default_policy and alternate_policy */ #define KFD_IOC_CACHE_POLICY_COHERENT 0 #define KFD_IOC_CACHE_POLICY_NONCOHERENT 1 @@ -191,6 +234,8 @@ struct kfd_ioctl_dbg_wave_control_args { __u32 buf_size_in_bytes; /*including gpu_id and buf_size */ }; +#define KFD_INVALID_FD 0xffffffff + /* Matching HSA_EVENTTYPE */ #define KFD_IOC_EVENT_SIGNAL 0 #define KFD_IOC_EVENT_NODECHANGE 1 @@ -276,12 +321,20 @@ struct kfd_hsa_hw_exception_data { __u32 gpu_id; }; +/* hsa signal event data */ +struct kfd_hsa_signal_event_data { + __u64 last_event_age; /* to and from KFD */ +}; + /* Event data */ struct kfd_event_data { union { + /* From KFD */ struct kfd_hsa_memory_exception_data memory_exception_data; struct kfd_hsa_hw_exception_data hw_exception_data; - }; /* From KFD */ + /* To and From KFD */ + struct kfd_hsa_signal_event_data signal_event_data; + }; __u64 kfd_event_data_ext; /* pointer to an extension structure for future exception types */ __u32 event_id; /* to KFD */ @@ -351,6 +404,7 @@ struct kfd_ioctl_acquire_vm_args { #define KFD_IOC_ALLOC_MEM_FLAGS_NO_SUBSTITUTE (1 << 28) #define KFD_IOC_ALLOC_MEM_FLAGS_AQL_QUEUE_MEM (1 << 27) #define KFD_IOC_ALLOC_MEM_FLAGS_COHERENT (1 << 26) +#define KFD_IOC_ALLOC_MEM_FLAGS_UNCACHED (1 << 25) /* Allocate memory for later SVM (shared virtual memory) mapping. * @@ -446,6 +500,12 @@ struct kfd_ioctl_import_dmabuf_args { __u32 dmabuf_fd; /* to KFD */ }; +struct kfd_ioctl_export_dmabuf_args { + __u64 handle; /* to KFD */ + __u32 flags; /* to KFD */ + __u32 dmabuf_fd; /* from KFD */ +}; + /* * KFD SMI(System Management Interface) events */ @@ -455,15 +515,129 @@ enum kfd_smi_event { KFD_SMI_EVENT_THERMAL_THROTTLE = 2, KFD_SMI_EVENT_GPU_PRE_RESET = 3, KFD_SMI_EVENT_GPU_POST_RESET = 4, + KFD_SMI_EVENT_MIGRATE_START = 5, + KFD_SMI_EVENT_MIGRATE_END = 6, + KFD_SMI_EVENT_PAGE_FAULT_START = 7, + KFD_SMI_EVENT_PAGE_FAULT_END = 8, + KFD_SMI_EVENT_QUEUE_EVICTION = 9, + KFD_SMI_EVENT_QUEUE_RESTORE = 10, + KFD_SMI_EVENT_UNMAP_FROM_GPU = 11, + + /* + * max event number, as a flag bit to get events from all processes, + * this requires super user permission, otherwise will not be able to + * receive event from any process. Without this flag to receive events + * from same process. + */ + KFD_SMI_EVENT_ALL_PROCESS = 64 +}; + +enum KFD_MIGRATE_TRIGGERS { + KFD_MIGRATE_TRIGGER_PREFETCH, + KFD_MIGRATE_TRIGGER_PAGEFAULT_GPU, + KFD_MIGRATE_TRIGGER_PAGEFAULT_CPU, + KFD_MIGRATE_TRIGGER_TTM_EVICTION +}; + +enum KFD_QUEUE_EVICTION_TRIGGERS { + KFD_QUEUE_EVICTION_TRIGGER_SVM, + KFD_QUEUE_EVICTION_TRIGGER_USERPTR, + KFD_QUEUE_EVICTION_TRIGGER_TTM, + KFD_QUEUE_EVICTION_TRIGGER_SUSPEND, + KFD_QUEUE_EVICTION_CRIU_CHECKPOINT, + KFD_QUEUE_EVICTION_CRIU_RESTORE +}; + +enum KFD_SVM_UNMAP_TRIGGERS { + KFD_SVM_UNMAP_TRIGGER_MMU_NOTIFY, + KFD_SVM_UNMAP_TRIGGER_MMU_NOTIFY_MIGRATE, + KFD_SVM_UNMAP_TRIGGER_UNMAP_FROM_CPU }; #define KFD_SMI_EVENT_MASK_FROM_INDEX(i) (1ULL << ((i) - 1)) +#define KFD_SMI_EVENT_MSG_SIZE 96 struct kfd_ioctl_smi_events_args { __u32 gpuid; /* to KFD */ __u32 anon_fd; /* from KFD */ }; +/************************************************************************************************** + * CRIU IOCTLs (Checkpoint Restore In Userspace) + * + * When checkpointing a process, the userspace application will perform: + * 1. PROCESS_INFO op to determine current process information. This pauses execution and evicts + * all the queues. + * 2. CHECKPOINT op to checkpoint process contents (BOs, queues, events, svm-ranges) + * 3. UNPAUSE op to un-evict all the queues + * + * When restoring a process, the CRIU userspace application will perform: + * + * 1. RESTORE op to restore process contents + * 2. RESUME op to start the process + * + * Note: Queues are forced into an evicted state after a successful PROCESS_INFO. User + * application needs to perform an UNPAUSE operation after calling PROCESS_INFO. + */ + +enum kfd_criu_op { + KFD_CRIU_OP_PROCESS_INFO, + KFD_CRIU_OP_CHECKPOINT, + KFD_CRIU_OP_UNPAUSE, + KFD_CRIU_OP_RESTORE, + KFD_CRIU_OP_RESUME, +}; + +/** + * kfd_ioctl_criu_args - Arguments perform CRIU operation + * @devices: [in/out] User pointer to memory location for devices information. + * This is an array of type kfd_criu_device_bucket. + * @bos: [in/out] User pointer to memory location for BOs information + * This is an array of type kfd_criu_bo_bucket. + * @priv_data: [in/out] User pointer to memory location for private data + * @priv_data_size: [in/out] Size of priv_data in bytes + * @num_devices: [in/out] Number of GPUs used by process. Size of @devices array. + * @num_bos [in/out] Number of BOs used by process. Size of @bos array. + * @num_objects: [in/out] Number of objects used by process. Objects are opaque to + * user application. + * @pid: [in/out] PID of the process being checkpointed + * @op [in] Type of operation (kfd_criu_op) + * + * Return: 0 on success, -errno on failure + */ +struct kfd_ioctl_criu_args { + __u64 devices; /* Used during ops: CHECKPOINT, RESTORE */ + __u64 bos; /* Used during ops: CHECKPOINT, RESTORE */ + __u64 priv_data; /* Used during ops: CHECKPOINT, RESTORE */ + __u64 priv_data_size; /* Used during ops: PROCESS_INFO, RESTORE */ + __u32 num_devices; /* Used during ops: PROCESS_INFO, RESTORE */ + __u32 num_bos; /* Used during ops: PROCESS_INFO, RESTORE */ + __u32 num_objects; /* Used during ops: PROCESS_INFO, RESTORE */ + __u32 pid; /* Used during ops: PROCESS_INFO, RESUME */ + __u32 op; +}; + +struct kfd_criu_device_bucket { + __u32 user_gpu_id; + __u32 actual_gpu_id; + __u32 drm_fd; + __u32 pad; +}; + +struct kfd_criu_bo_bucket { + __u64 addr; + __u64 size; + __u64 offset; + __u64 restored_offset; /* During restore, updated offset for BO */ + __u32 gpu_id; /* This is the user_gpu_id */ + __u32 alloc_flags; + __u32 dmabuf_fd; + __u32 pad; +}; + +/* CRIU IOCTLs - END */ +/**************************************************************************************************/ + /* Register offset inside the remapped mmio page */ enum kfd_mmio_remap { @@ -471,6 +645,804 @@ enum kfd_mmio_remap { KFD_MMIO_REMAP_HDP_REG_FLUSH_CNTL = 4, }; +/* Guarantee host access to memory */ +#define KFD_IOCTL_SVM_FLAG_HOST_ACCESS 0x00000001 +/* Fine grained coherency between all devices with access */ +#define KFD_IOCTL_SVM_FLAG_COHERENT 0x00000002 +/* Use any GPU in same hive as preferred device */ +#define KFD_IOCTL_SVM_FLAG_HIVE_LOCAL 0x00000004 +/* GPUs only read, allows replication */ +#define KFD_IOCTL_SVM_FLAG_GPU_RO 0x00000008 +/* Allow execution on GPU */ +#define KFD_IOCTL_SVM_FLAG_GPU_EXEC 0x00000010 +/* GPUs mostly read, may allow similar optimizations as RO, but writes fault */ +#define KFD_IOCTL_SVM_FLAG_GPU_READ_MOSTLY 0x00000020 +/* Keep GPU memory mapping always valid as if XNACK is disable */ +#define KFD_IOCTL_SVM_FLAG_GPU_ALWAYS_MAPPED 0x00000040 + +/** + * kfd_ioctl_svm_op - SVM ioctl operations + * + * @KFD_IOCTL_SVM_OP_SET_ATTR: Modify one or more attributes + * @KFD_IOCTL_SVM_OP_GET_ATTR: Query one or more attributes + */ +enum kfd_ioctl_svm_op { + KFD_IOCTL_SVM_OP_SET_ATTR, + KFD_IOCTL_SVM_OP_GET_ATTR +}; + +/** kfd_ioctl_svm_location - Enum for preferred and prefetch locations + * + * GPU IDs are used to specify GPUs as preferred and prefetch locations. + * Below definitions are used for system memory or for leaving the preferred + * location unspecified. + */ +enum kfd_ioctl_svm_location { + KFD_IOCTL_SVM_LOCATION_SYSMEM = 0, + KFD_IOCTL_SVM_LOCATION_UNDEFINED = 0xffffffff +}; + +/** + * kfd_ioctl_svm_attr_type - SVM attribute types + * + * @KFD_IOCTL_SVM_ATTR_PREFERRED_LOC: gpuid of the preferred location, 0 for + * system memory + * @KFD_IOCTL_SVM_ATTR_PREFETCH_LOC: gpuid of the prefetch location, 0 for + * system memory. Setting this triggers an + * immediate prefetch (migration). + * @KFD_IOCTL_SVM_ATTR_ACCESS: + * @KFD_IOCTL_SVM_ATTR_ACCESS_IN_PLACE: + * @KFD_IOCTL_SVM_ATTR_NO_ACCESS: specify memory access for the gpuid given + * by the attribute value + * @KFD_IOCTL_SVM_ATTR_SET_FLAGS: bitmask of flags to set (see + * KFD_IOCTL_SVM_FLAG_...) + * @KFD_IOCTL_SVM_ATTR_CLR_FLAGS: bitmask of flags to clear + * @KFD_IOCTL_SVM_ATTR_GRANULARITY: migration granularity + * (log2 num pages) + */ +enum kfd_ioctl_svm_attr_type { + KFD_IOCTL_SVM_ATTR_PREFERRED_LOC, + KFD_IOCTL_SVM_ATTR_PREFETCH_LOC, + KFD_IOCTL_SVM_ATTR_ACCESS, + KFD_IOCTL_SVM_ATTR_ACCESS_IN_PLACE, + KFD_IOCTL_SVM_ATTR_NO_ACCESS, + KFD_IOCTL_SVM_ATTR_SET_FLAGS, + KFD_IOCTL_SVM_ATTR_CLR_FLAGS, + KFD_IOCTL_SVM_ATTR_GRANULARITY +}; + +/** + * kfd_ioctl_svm_attribute - Attributes as pairs of type and value + * + * The meaning of the @value depends on the attribute type. + * + * @type: attribute type (see enum @kfd_ioctl_svm_attr_type) + * @value: attribute value + */ +struct kfd_ioctl_svm_attribute { + __u32 type; + __u32 value; +}; + +/** + * kfd_ioctl_svm_args - Arguments for SVM ioctl + * + * @op specifies the operation to perform (see enum + * @kfd_ioctl_svm_op). @start_addr and @size are common for all + * operations. + * + * A variable number of attributes can be given in @attrs. + * @nattr specifies the number of attributes. New attributes can be + * added in the future without breaking the ABI. If unknown attributes + * are given, the function returns -EINVAL. + * + * @KFD_IOCTL_SVM_OP_SET_ATTR sets attributes for a virtual address + * range. It may overlap existing virtual address ranges. If it does, + * the existing ranges will be split such that the attribute changes + * only apply to the specified address range. + * + * @KFD_IOCTL_SVM_OP_GET_ATTR returns the intersection of attributes + * over all memory in the given range and returns the result as the + * attribute value. If different pages have different preferred or + * prefetch locations, 0xffffffff will be returned for + * @KFD_IOCTL_SVM_ATTR_PREFERRED_LOC or + * @KFD_IOCTL_SVM_ATTR_PREFETCH_LOC resepctively. For + * @KFD_IOCTL_SVM_ATTR_SET_FLAGS, flags of all pages will be + * aggregated by bitwise AND. That means, a flag will be set in the + * output, if that flag is set for all pages in the range. For + * @KFD_IOCTL_SVM_ATTR_CLR_FLAGS, flags of all pages will be + * aggregated by bitwise NOR. That means, a flag will be set in the + * output, if that flag is clear for all pages in the range. + * The minimum migration granularity throughout the range will be + * returned for @KFD_IOCTL_SVM_ATTR_GRANULARITY. + * + * Querying of accessibility attributes works by initializing the + * attribute type to @KFD_IOCTL_SVM_ATTR_ACCESS and the value to the + * GPUID being queried. Multiple attributes can be given to allow + * querying multiple GPUIDs. The ioctl function overwrites the + * attribute type to indicate the access for the specified GPU. + */ +struct kfd_ioctl_svm_args { + __u64 start_addr; + __u64 size; + __u32 op; + __u32 nattr; + /* Variable length array of attributes */ + struct kfd_ioctl_svm_attribute attrs[]; +}; + +/** + * kfd_ioctl_set_xnack_mode_args - Arguments for set_xnack_mode + * + * @xnack_enabled: [in/out] Whether to enable XNACK mode for this process + * + * @xnack_enabled indicates whether recoverable page faults should be + * enabled for the current process. 0 means disabled, positive means + * enabled, negative means leave unchanged. If enabled, virtual address + * translations on GFXv9 and later AMD GPUs can return XNACK and retry + * the access until a valid PTE is available. This is used to implement + * device page faults. + * + * On output, @xnack_enabled returns the (new) current mode (0 or + * positive). Therefore, a negative input value can be used to query + * the current mode without changing it. + * + * The XNACK mode fundamentally changes the way SVM managed memory works + * in the driver, with subtle effects on application performance and + * functionality. + * + * Enabling XNACK mode requires shader programs to be compiled + * differently. Furthermore, not all GPUs support changing the mode + * per-process. Therefore changing the mode is only allowed while no + * user mode queues exist in the process. This ensure that no shader + * code is running that may be compiled for the wrong mode. And GPUs + * that cannot change to the requested mode will prevent the XNACK + * mode from occurring. All GPUs used by the process must be in the + * same XNACK mode. + * + * GFXv8 or older GPUs do not support 48 bit virtual addresses or SVM. + * Therefore those GPUs are not considered for the XNACK mode switch. + * + * Return: 0 on success, -errno on failure + */ +struct kfd_ioctl_set_xnack_mode_args { + __s32 xnack_enabled; +}; + +/* Wave launch override modes */ +enum kfd_dbg_trap_override_mode { + KFD_DBG_TRAP_OVERRIDE_OR = 0, + KFD_DBG_TRAP_OVERRIDE_REPLACE = 1 +}; + +/* Wave launch overrides */ +enum kfd_dbg_trap_mask { + KFD_DBG_TRAP_MASK_FP_INVALID = 1, + KFD_DBG_TRAP_MASK_FP_INPUT_DENORMAL = 2, + KFD_DBG_TRAP_MASK_FP_DIVIDE_BY_ZERO = 4, + KFD_DBG_TRAP_MASK_FP_OVERFLOW = 8, + KFD_DBG_TRAP_MASK_FP_UNDERFLOW = 16, + KFD_DBG_TRAP_MASK_FP_INEXACT = 32, + KFD_DBG_TRAP_MASK_INT_DIVIDE_BY_ZERO = 64, + KFD_DBG_TRAP_MASK_DBG_ADDRESS_WATCH = 128, + KFD_DBG_TRAP_MASK_DBG_MEMORY_VIOLATION = 256, + KFD_DBG_TRAP_MASK_TRAP_ON_WAVE_START = (1 << 30), + KFD_DBG_TRAP_MASK_TRAP_ON_WAVE_END = (1 << 31) +}; + +/* Wave launch modes */ +enum kfd_dbg_trap_wave_launch_mode { + KFD_DBG_TRAP_WAVE_LAUNCH_MODE_NORMAL = 0, + KFD_DBG_TRAP_WAVE_LAUNCH_MODE_HALT = 1, + KFD_DBG_TRAP_WAVE_LAUNCH_MODE_DEBUG = 3 +}; + +/* Address watch modes */ +enum kfd_dbg_trap_address_watch_mode { + KFD_DBG_TRAP_ADDRESS_WATCH_MODE_READ = 0, + KFD_DBG_TRAP_ADDRESS_WATCH_MODE_NONREAD = 1, + KFD_DBG_TRAP_ADDRESS_WATCH_MODE_ATOMIC = 2, + KFD_DBG_TRAP_ADDRESS_WATCH_MODE_ALL = 3 +}; + +/* Additional wave settings */ +enum kfd_dbg_trap_flags { + KFD_DBG_TRAP_FLAG_SINGLE_MEM_OP = 1, +}; + +/* Trap exceptions */ +enum kfd_dbg_trap_exception_code { + EC_NONE = 0, + /* per queue */ + EC_QUEUE_WAVE_ABORT = 1, + EC_QUEUE_WAVE_TRAP = 2, + EC_QUEUE_WAVE_MATH_ERROR = 3, + EC_QUEUE_WAVE_ILLEGAL_INSTRUCTION = 4, + EC_QUEUE_WAVE_MEMORY_VIOLATION = 5, + EC_QUEUE_WAVE_APERTURE_VIOLATION = 6, + EC_QUEUE_PACKET_DISPATCH_DIM_INVALID = 16, + EC_QUEUE_PACKET_DISPATCH_GROUP_SEGMENT_SIZE_INVALID = 17, + EC_QUEUE_PACKET_DISPATCH_CODE_INVALID = 18, + EC_QUEUE_PACKET_RESERVED = 19, + EC_QUEUE_PACKET_UNSUPPORTED = 20, + EC_QUEUE_PACKET_DISPATCH_WORK_GROUP_SIZE_INVALID = 21, + EC_QUEUE_PACKET_DISPATCH_REGISTER_INVALID = 22, + EC_QUEUE_PACKET_VENDOR_UNSUPPORTED = 23, + EC_QUEUE_PREEMPTION_ERROR = 30, + EC_QUEUE_NEW = 31, + /* per device */ + EC_DEVICE_QUEUE_DELETE = 32, + EC_DEVICE_MEMORY_VIOLATION = 33, + EC_DEVICE_RAS_ERROR = 34, + EC_DEVICE_FATAL_HALT = 35, + EC_DEVICE_NEW = 36, + /* per process */ + EC_PROCESS_RUNTIME = 48, + EC_PROCESS_DEVICE_REMOVE = 49, + EC_MAX +}; + +/* Mask generated by ecode in kfd_dbg_trap_exception_code */ +#define KFD_EC_MASK(ecode) (1ULL << (ecode - 1)) + +/* Masks for exception code type checks below */ +#define KFD_EC_MASK_QUEUE (KFD_EC_MASK(EC_QUEUE_WAVE_ABORT) | \ + KFD_EC_MASK(EC_QUEUE_WAVE_TRAP) | \ + KFD_EC_MASK(EC_QUEUE_WAVE_MATH_ERROR) | \ + KFD_EC_MASK(EC_QUEUE_WAVE_ILLEGAL_INSTRUCTION) | \ + KFD_EC_MASK(EC_QUEUE_WAVE_MEMORY_VIOLATION) | \ + KFD_EC_MASK(EC_QUEUE_WAVE_APERTURE_VIOLATION) | \ + KFD_EC_MASK(EC_QUEUE_PACKET_DISPATCH_DIM_INVALID) | \ + KFD_EC_MASK(EC_QUEUE_PACKET_DISPATCH_GROUP_SEGMENT_SIZE_INVALID) | \ + KFD_EC_MASK(EC_QUEUE_PACKET_DISPATCH_CODE_INVALID) | \ + KFD_EC_MASK(EC_QUEUE_PACKET_RESERVED) | \ + KFD_EC_MASK(EC_QUEUE_PACKET_UNSUPPORTED) | \ + KFD_EC_MASK(EC_QUEUE_PACKET_DISPATCH_WORK_GROUP_SIZE_INVALID) | \ + KFD_EC_MASK(EC_QUEUE_PACKET_DISPATCH_REGISTER_INVALID) | \ + KFD_EC_MASK(EC_QUEUE_PACKET_VENDOR_UNSUPPORTED) | \ + KFD_EC_MASK(EC_QUEUE_PREEMPTION_ERROR) | \ + KFD_EC_MASK(EC_QUEUE_NEW)) +#define KFD_EC_MASK_DEVICE (KFD_EC_MASK(EC_DEVICE_QUEUE_DELETE) | \ + KFD_EC_MASK(EC_DEVICE_RAS_ERROR) | \ + KFD_EC_MASK(EC_DEVICE_FATAL_HALT) | \ + KFD_EC_MASK(EC_DEVICE_MEMORY_VIOLATION) | \ + KFD_EC_MASK(EC_DEVICE_NEW)) +#define KFD_EC_MASK_PROCESS (KFD_EC_MASK(EC_PROCESS_RUNTIME) | \ + KFD_EC_MASK(EC_PROCESS_DEVICE_REMOVE)) + +/* Checks for exception code types for KFD search */ +#define KFD_DBG_EC_TYPE_IS_QUEUE(ecode) \ + (!!(KFD_EC_MASK(ecode) & KFD_EC_MASK_QUEUE)) +#define KFD_DBG_EC_TYPE_IS_DEVICE(ecode) \ + (!!(KFD_EC_MASK(ecode) & KFD_EC_MASK_DEVICE)) +#define KFD_DBG_EC_TYPE_IS_PROCESS(ecode) \ + (!!(KFD_EC_MASK(ecode) & KFD_EC_MASK_PROCESS)) + + +/* Runtime enable states */ +enum kfd_dbg_runtime_state { + DEBUG_RUNTIME_STATE_DISABLED = 0, + DEBUG_RUNTIME_STATE_ENABLED = 1, + DEBUG_RUNTIME_STATE_ENABLED_BUSY = 2, + DEBUG_RUNTIME_STATE_ENABLED_ERROR = 3 +}; + +/* Runtime enable status */ +struct kfd_runtime_info { + __u64 r_debug; + __u32 runtime_state; + __u32 ttmp_setup; +}; + +/* Enable modes for runtime enable */ +#define KFD_RUNTIME_ENABLE_MODE_ENABLE_MASK 1 +#define KFD_RUNTIME_ENABLE_MODE_TTMP_SAVE_MASK 2 + +/** + * kfd_ioctl_runtime_enable_args - Arguments for runtime enable + * + * Coordinates debug exception signalling and debug device enablement with runtime. + * + * @r_debug - pointer to user struct for sharing information between ROCr and the debuggger + * @mode_mask - mask to set mode + * KFD_RUNTIME_ENABLE_MODE_ENABLE_MASK - enable runtime for debugging, otherwise disable + * KFD_RUNTIME_ENABLE_MODE_TTMP_SAVE_MASK - enable trap temporary setup (ignore on disable) + * @capabilities_mask - mask to notify runtime on what KFD supports + * + * Return - 0 on SUCCESS. + * - EBUSY if runtime enable call already pending. + * - EEXIST if user queues already active prior to call. + * If process is debug enabled, runtime enable will enable debug devices and + * wait for debugger process to send runtime exception EC_PROCESS_RUNTIME + * to unblock - see kfd_ioctl_dbg_trap_args. + * + */ +struct kfd_ioctl_runtime_enable_args { + __u64 r_debug; + __u32 mode_mask; + __u32 capabilities_mask; +}; + +/* Queue information */ +struct kfd_queue_snapshot_entry { + __u64 exception_status; + __u64 ring_base_address; + __u64 write_pointer_address; + __u64 read_pointer_address; + __u64 ctx_save_restore_address; + __u32 queue_id; + __u32 gpu_id; + __u32 ring_size; + __u32 queue_type; + __u32 ctx_save_restore_area_size; + __u32 reserved; +}; + +/* Queue status return for suspend/resume */ +#define KFD_DBG_QUEUE_ERROR_BIT 30 +#define KFD_DBG_QUEUE_INVALID_BIT 31 +#define KFD_DBG_QUEUE_ERROR_MASK (1 << KFD_DBG_QUEUE_ERROR_BIT) +#define KFD_DBG_QUEUE_INVALID_MASK (1 << KFD_DBG_QUEUE_INVALID_BIT) + +/* Context save area header information */ +struct kfd_context_save_area_header { + struct { + __u32 control_stack_offset; + __u32 control_stack_size; + __u32 wave_state_offset; + __u32 wave_state_size; + } wave_state; + __u32 debug_offset; + __u32 debug_size; + __u64 err_payload_addr; + __u32 err_event_id; + __u32 reserved1; +}; + +/* + * Debug operations + * + * For specifics on usage and return values, see documentation per operation + * below. Otherwise, generic error returns apply: + * - ESRCH if the process to debug does not exist. + * + * - EINVAL (with KFD_IOC_DBG_TRAP_ENABLE exempt) if operation + * KFD_IOC_DBG_TRAP_ENABLE has not succeeded prior. + * Also returns this error if GPU hardware scheduling is not supported. + * + * - EPERM (with KFD_IOC_DBG_TRAP_DISABLE exempt) if target process is not + * PTRACE_ATTACHED. KFD_IOC_DBG_TRAP_DISABLE is exempt to allow + * clean up of debug mode as long as process is debug enabled. + * + * - EACCES if any DBG_HW_OP (debug hardware operation) is requested when + * AMDKFD_IOC_RUNTIME_ENABLE has not succeeded prior. + * + * - ENODEV if any GPU does not support debugging on a DBG_HW_OP call. + * + * - Other errors may be returned when a DBG_HW_OP occurs while the GPU + * is in a fatal state. + * + */ +enum kfd_dbg_trap_operations { + KFD_IOC_DBG_TRAP_ENABLE = 0, + KFD_IOC_DBG_TRAP_DISABLE = 1, + KFD_IOC_DBG_TRAP_SEND_RUNTIME_EVENT = 2, + KFD_IOC_DBG_TRAP_SET_EXCEPTIONS_ENABLED = 3, + KFD_IOC_DBG_TRAP_SET_WAVE_LAUNCH_OVERRIDE = 4, /* DBG_HW_OP */ + KFD_IOC_DBG_TRAP_SET_WAVE_LAUNCH_MODE = 5, /* DBG_HW_OP */ + KFD_IOC_DBG_TRAP_SUSPEND_QUEUES = 6, /* DBG_HW_OP */ + KFD_IOC_DBG_TRAP_RESUME_QUEUES = 7, /* DBG_HW_OP */ + KFD_IOC_DBG_TRAP_SET_NODE_ADDRESS_WATCH = 8, /* DBG_HW_OP */ + KFD_IOC_DBG_TRAP_CLEAR_NODE_ADDRESS_WATCH = 9, /* DBG_HW_OP */ + KFD_IOC_DBG_TRAP_SET_FLAGS = 10, + KFD_IOC_DBG_TRAP_QUERY_DEBUG_EVENT = 11, + KFD_IOC_DBG_TRAP_QUERY_EXCEPTION_INFO = 12, + KFD_IOC_DBG_TRAP_GET_QUEUE_SNAPSHOT = 13, + KFD_IOC_DBG_TRAP_GET_DEVICE_SNAPSHOT = 14 +}; + +/** + * kfd_ioctl_dbg_trap_enable_args + * + * Arguments for KFD_IOC_DBG_TRAP_ENABLE. + * + * Enables debug session for target process. Call @op KFD_IOC_DBG_TRAP_DISABLE in + * kfd_ioctl_dbg_trap_args to disable debug session. + * + * @exception_mask (IN) - exceptions to raise to the debugger + * @rinfo_ptr (IN) - pointer to runtime info buffer (see kfd_runtime_info) + * @rinfo_size (IN/OUT) - size of runtime info buffer in bytes + * @dbg_fd (IN) - fd the KFD will nofify the debugger with of raised + * exceptions set in exception_mask. + * + * Generic errors apply (see kfd_dbg_trap_operations). + * Return - 0 on SUCCESS. + * Copies KFD saved kfd_runtime_info to @rinfo_ptr on enable. + * Size of kfd_runtime saved by the KFD returned to @rinfo_size. + * - EBADF if KFD cannot get a reference to dbg_fd. + * - EFAULT if KFD cannot copy runtime info to rinfo_ptr. + * - EINVAL if target process is already debug enabled. + * + */ +struct kfd_ioctl_dbg_trap_enable_args { + __u64 exception_mask; + __u64 rinfo_ptr; + __u32 rinfo_size; + __u32 dbg_fd; +}; + +/** + * kfd_ioctl_dbg_trap_send_runtime_event_args + * + * + * Arguments for KFD_IOC_DBG_TRAP_SEND_RUNTIME_EVENT. + * Raises exceptions to runtime. + * + * @exception_mask (IN) - exceptions to raise to runtime + * @gpu_id (IN) - target device id + * @queue_id (IN) - target queue id + * + * Generic errors apply (see kfd_dbg_trap_operations). + * Return - 0 on SUCCESS. + * - ENODEV if gpu_id not found. + * If exception_mask contains EC_PROCESS_RUNTIME, unblocks pending + * AMDKFD_IOC_RUNTIME_ENABLE call - see kfd_ioctl_runtime_enable_args. + * All other exceptions are raised to runtime through err_payload_addr. + * See kfd_context_save_area_header. + */ +struct kfd_ioctl_dbg_trap_send_runtime_event_args { + __u64 exception_mask; + __u32 gpu_id; + __u32 queue_id; +}; + +/** + * kfd_ioctl_dbg_trap_set_exceptions_enabled_args + * + * Arguments for KFD_IOC_SET_EXCEPTIONS_ENABLED + * Set new exceptions to be raised to the debugger. + * + * @exception_mask (IN) - new exceptions to raise the debugger + * + * Generic errors apply (see kfd_dbg_trap_operations). + * Return - 0 on SUCCESS. + */ +struct kfd_ioctl_dbg_trap_set_exceptions_enabled_args { + __u64 exception_mask; +}; + +/** + * kfd_ioctl_dbg_trap_set_wave_launch_override_args + * + * Arguments for KFD_IOC_DBG_TRAP_SET_WAVE_LAUNCH_OVERRIDE + * Enable HW exceptions to raise trap. + * + * @override_mode (IN) - see kfd_dbg_trap_override_mode + * @enable_mask (IN/OUT) - reference kfd_dbg_trap_mask. + * IN is the override modes requested to be enabled. + * OUT is referenced in Return below. + * @support_request_mask (IN/OUT) - reference kfd_dbg_trap_mask. + * IN is the override modes requested for support check. + * OUT is referenced in Return below. + * + * Generic errors apply (see kfd_dbg_trap_operations). + * Return - 0 on SUCCESS. + * Previous enablement is returned in @enable_mask. + * Actual override support is returned in @support_request_mask. + * - EINVAL if override mode is not supported. + * - EACCES if trap support requested is not actually supported. + * i.e. enable_mask (IN) is not a subset of support_request_mask (OUT). + * Otherwise it is considered a generic error (see kfd_dbg_trap_operations). + */ +struct kfd_ioctl_dbg_trap_set_wave_launch_override_args { + __u32 override_mode; + __u32 enable_mask; + __u32 support_request_mask; + __u32 pad; +}; + +/** + * kfd_ioctl_dbg_trap_set_wave_launch_mode_args + * + * Arguments for KFD_IOC_DBG_TRAP_SET_WAVE_LAUNCH_MODE + * Set wave launch mode. + * + * @mode (IN) - see kfd_dbg_trap_wave_launch_mode + * + * Generic errors apply (see kfd_dbg_trap_operations). + * Return - 0 on SUCCESS. + */ +struct kfd_ioctl_dbg_trap_set_wave_launch_mode_args { + __u32 launch_mode; + __u32 pad; +}; + +/** + * kfd_ioctl_dbg_trap_suspend_queues_ags + * + * Arguments for KFD_IOC_DBG_TRAP_SUSPEND_QUEUES + * Suspend queues. + * + * @exception_mask (IN) - raised exceptions to clear + * @queue_array_ptr (IN) - pointer to array of queue ids (u32 per queue id) + * to suspend + * @num_queues (IN) - number of queues to suspend in @queue_array_ptr + * @grace_period (IN) - wave time allowance before preemption + * per 1K GPU clock cycle unit + * + * Generic errors apply (see kfd_dbg_trap_operations). + * Destruction of a suspended queue is blocked until the queue is + * resumed. This allows the debugger to access queue information and + * the its context save area without running into a race condition on + * queue destruction. + * Automatically copies per queue context save area header information + * into the save area base + * (see kfd_queue_snapshot_entry and kfd_context_save_area_header). + * + * Return - Number of queues suspended on SUCCESS. + * . KFD_DBG_QUEUE_ERROR_MASK and KFD_DBG_QUEUE_INVALID_MASK masked + * for each queue id in @queue_array_ptr array reports unsuccessful + * suspend reason. + * KFD_DBG_QUEUE_ERROR_MASK = HW failure. + * KFD_DBG_QUEUE_INVALID_MASK = queue does not exist, is new or + * is being destroyed. + */ +struct kfd_ioctl_dbg_trap_suspend_queues_args { + __u64 exception_mask; + __u64 queue_array_ptr; + __u32 num_queues; + __u32 grace_period; +}; + +/** + * kfd_ioctl_dbg_trap_resume_queues_args + * + * Arguments for KFD_IOC_DBG_TRAP_RESUME_QUEUES + * Resume queues. + * + * @queue_array_ptr (IN) - pointer to array of queue ids (u32 per queue id) + * to resume + * @num_queues (IN) - number of queues to resume in @queue_array_ptr + * + * Generic errors apply (see kfd_dbg_trap_operations). + * Return - Number of queues resumed on SUCCESS. + * KFD_DBG_QUEUE_ERROR_MASK and KFD_DBG_QUEUE_INVALID_MASK mask + * for each queue id in @queue_array_ptr array reports unsuccessful + * resume reason. + * KFD_DBG_QUEUE_ERROR_MASK = HW failure. + * KFD_DBG_QUEUE_INVALID_MASK = queue does not exist. + */ +struct kfd_ioctl_dbg_trap_resume_queues_args { + __u64 queue_array_ptr; + __u32 num_queues; + __u32 pad; +}; + +/** + * kfd_ioctl_dbg_trap_set_node_address_watch_args + * + * Arguments for KFD_IOC_DBG_TRAP_SET_NODE_ADDRESS_WATCH + * Sets address watch for device. + * + * @address (IN) - watch address to set + * @mode (IN) - see kfd_dbg_trap_address_watch_mode + * @mask (IN) - watch address mask + * @gpu_id (IN) - target gpu to set watch point + * @id (OUT) - watch id allocated + * + * Generic errors apply (see kfd_dbg_trap_operations). + * Return - 0 on SUCCESS. + * Allocated watch ID returned to @id. + * - ENODEV if gpu_id not found. + * - ENOMEM if watch IDs can be allocated + */ +struct kfd_ioctl_dbg_trap_set_node_address_watch_args { + __u64 address; + __u32 mode; + __u32 mask; + __u32 gpu_id; + __u32 id; +}; + +/** + * kfd_ioctl_dbg_trap_clear_node_address_watch_args + * + * Arguments for KFD_IOC_DBG_TRAP_CLEAR_NODE_ADDRESS_WATCH + * Clear address watch for device. + * + * @gpu_id (IN) - target device to clear watch point + * @id (IN) - allocated watch id to clear + * + * Generic errors apply (see kfd_dbg_trap_operations). + * Return - 0 on SUCCESS. + * - ENODEV if gpu_id not found. + * - EINVAL if watch ID has not been allocated. + */ +struct kfd_ioctl_dbg_trap_clear_node_address_watch_args { + __u32 gpu_id; + __u32 id; +}; + +/** + * kfd_ioctl_dbg_trap_set_flags_args + * + * Arguments for KFD_IOC_DBG_TRAP_SET_FLAGS + * Sets flags for wave behaviour. + * + * @flags (IN/OUT) - IN = flags to enable, OUT = flags previously enabled + * + * Generic errors apply (see kfd_dbg_trap_operations). + * Return - 0 on SUCCESS. + * - EACCESS if any debug device does not allow flag options. + */ +struct kfd_ioctl_dbg_trap_set_flags_args { + __u32 flags; + __u32 pad; +}; + +/** + * kfd_ioctl_dbg_trap_query_debug_event_args + * + * Arguments for KFD_IOC_DBG_TRAP_QUERY_DEBUG_EVENT + * + * Find one or more raised exceptions. This function can return multiple + * exceptions from a single queue or a single device with one call. To find + * all raised exceptions, this function must be called repeatedly until it + * returns -EAGAIN. Returned exceptions can optionally be cleared by + * setting the corresponding bit in the @exception_mask input parameter. + * However, clearing an exception prevents retrieving further information + * about it with KFD_IOC_DBG_TRAP_QUERY_EXCEPTION_INFO. + * + * @exception_mask (IN/OUT) - exception to clear (IN) and raised (OUT) + * @gpu_id (OUT) - gpu id of exceptions raised + * @queue_id (OUT) - queue id of exceptions raised + * + * Generic errors apply (see kfd_dbg_trap_operations). + * Return - 0 on raised exception found + * Raised exceptions found are returned in @exception mask + * with reported source id returned in @gpu_id or @queue_id. + * - EAGAIN if no raised exception has been found + */ +struct kfd_ioctl_dbg_trap_query_debug_event_args { + __u64 exception_mask; + __u32 gpu_id; + __u32 queue_id; +}; + +/** + * kfd_ioctl_dbg_trap_query_exception_info_args + * + * Arguments KFD_IOC_DBG_TRAP_QUERY_EXCEPTION_INFO + * Get additional info on raised exception. + * + * @info_ptr (IN) - pointer to exception info buffer to copy to + * @info_size (IN/OUT) - exception info buffer size (bytes) + * @source_id (IN) - target gpu or queue id + * @exception_code (IN) - target exception + * @clear_exception (IN) - clear raised @exception_code exception + * (0 = false, 1 = true) + * + * Generic errors apply (see kfd_dbg_trap_operations). + * Return - 0 on SUCCESS. + * If @exception_code is EC_DEVICE_MEMORY_VIOLATION, copy @info_size(OUT) + * bytes of memory exception data to @info_ptr. + * If @exception_code is EC_PROCESS_RUNTIME, copy saved + * kfd_runtime_info to @info_ptr. + * Actual required @info_ptr size (bytes) is returned in @info_size. + */ +struct kfd_ioctl_dbg_trap_query_exception_info_args { + __u64 info_ptr; + __u32 info_size; + __u32 source_id; + __u32 exception_code; + __u32 clear_exception; +}; + +/** + * kfd_ioctl_dbg_trap_get_queue_snapshot_args + * + * Arguments KFD_IOC_DBG_TRAP_GET_QUEUE_SNAPSHOT + * Get queue information. + * + * @exception_mask (IN) - exceptions raised to clear + * @snapshot_buf_ptr (IN) - queue snapshot entry buffer (see kfd_queue_snapshot_entry) + * @num_queues (IN/OUT) - number of queue snapshot entries + * The debugger specifies the size of the array allocated in @num_queues. + * KFD returns the number of queues that actually existed. If this is + * larger than the size specified by the debugger, KFD will not overflow + * the array allocated by the debugger. + * + * @entry_size (IN/OUT) - size per entry in bytes + * The debugger specifies sizeof(struct kfd_queue_snapshot_entry) in + * @entry_size. KFD returns the number of bytes actually populated per + * entry. The debugger should use the KFD_IOCTL_MINOR_VERSION to determine, + * which fields in struct kfd_queue_snapshot_entry are valid. This allows + * growing the ABI in a backwards compatible manner. + * Note that entry_size(IN) should still be used to stride the snapshot buffer in the + * event that it's larger than actual kfd_queue_snapshot_entry. + * + * Generic errors apply (see kfd_dbg_trap_operations). + * Return - 0 on SUCCESS. + * Copies @num_queues(IN) queue snapshot entries of size @entry_size(IN) + * into @snapshot_buf_ptr if @num_queues(IN) > 0. + * Otherwise return @num_queues(OUT) queue snapshot entries that exist. + */ +struct kfd_ioctl_dbg_trap_queue_snapshot_args { + __u64 exception_mask; + __u64 snapshot_buf_ptr; + __u32 num_queues; + __u32 entry_size; +}; + +/** + * kfd_ioctl_dbg_trap_get_device_snapshot_args + * + * Arguments for KFD_IOC_DBG_TRAP_GET_DEVICE_SNAPSHOT + * Get device information. + * + * @exception_mask (IN) - exceptions raised to clear + * @snapshot_buf_ptr (IN) - pointer to snapshot buffer (see kfd_dbg_device_info_entry) + * @num_devices (IN/OUT) - number of debug devices to snapshot + * The debugger specifies the size of the array allocated in @num_devices. + * KFD returns the number of devices that actually existed. If this is + * larger than the size specified by the debugger, KFD will not overflow + * the array allocated by the debugger. + * + * @entry_size (IN/OUT) - size per entry in bytes + * The debugger specifies sizeof(struct kfd_dbg_device_info_entry) in + * @entry_size. KFD returns the number of bytes actually populated. The + * debugger should use KFD_IOCTL_MINOR_VERSION to determine, which fields + * in struct kfd_dbg_device_info_entry are valid. This allows growing the + * ABI in a backwards compatible manner. + * Note that entry_size(IN) should still be used to stride the snapshot buffer in the + * event that it's larger than actual kfd_dbg_device_info_entry. + * + * Generic errors apply (see kfd_dbg_trap_operations). + * Return - 0 on SUCCESS. + * Copies @num_devices(IN) device snapshot entries of size @entry_size(IN) + * into @snapshot_buf_ptr if @num_devices(IN) > 0. + * Otherwise return @num_devices(OUT) queue snapshot entries that exist. + */ +struct kfd_ioctl_dbg_trap_device_snapshot_args { + __u64 exception_mask; + __u64 snapshot_buf_ptr; + __u32 num_devices; + __u32 entry_size; +}; + +/** + * kfd_ioctl_dbg_trap_args + * + * Arguments to debug target process. + * + * @pid - target process to debug + * @op - debug operation (see kfd_dbg_trap_operations) + * + * @op determines which union struct args to use. + * Refer to kern docs for each kfd_ioctl_dbg_trap_*_args struct. + */ +struct kfd_ioctl_dbg_trap_args { + __u32 pid; + __u32 op; + + union { + struct kfd_ioctl_dbg_trap_enable_args enable; + struct kfd_ioctl_dbg_trap_send_runtime_event_args send_runtime_event; + struct kfd_ioctl_dbg_trap_set_exceptions_enabled_args set_exceptions_enabled; + struct kfd_ioctl_dbg_trap_set_wave_launch_override_args launch_override; + struct kfd_ioctl_dbg_trap_set_wave_launch_mode_args launch_mode; + struct kfd_ioctl_dbg_trap_suspend_queues_args suspend_queues; + struct kfd_ioctl_dbg_trap_resume_queues_args resume_queues; + struct kfd_ioctl_dbg_trap_set_node_address_watch_args set_node_address_watch; + struct kfd_ioctl_dbg_trap_clear_node_address_watch_args clear_node_address_watch; + struct kfd_ioctl_dbg_trap_set_flags_args set_flags; + struct kfd_ioctl_dbg_trap_query_debug_event_args query_debug_event; + struct kfd_ioctl_dbg_trap_query_exception_info_args query_exception_info; + struct kfd_ioctl_dbg_trap_queue_snapshot_args queue_snapshot; + struct kfd_ioctl_dbg_trap_device_snapshot_args device_snapshot; + }; +}; + #define AMDKFD_IOCTL_BASE 'K' #define AMDKFD_IO(nr) _IO(AMDKFD_IOCTL_BASE, nr) #define AMDKFD_IOR(nr, type) _IOR(AMDKFD_IOCTL_BASE, nr, type) @@ -513,16 +1485,16 @@ enum kfd_mmio_remap { #define AMDKFD_IOC_WAIT_EVENTS \ AMDKFD_IOWR(0x0C, struct kfd_ioctl_wait_events_args) -#define AMDKFD_IOC_DBG_REGISTER \ +#define AMDKFD_IOC_DBG_REGISTER_DEPRECATED \ AMDKFD_IOW(0x0D, struct kfd_ioctl_dbg_register_args) -#define AMDKFD_IOC_DBG_UNREGISTER \ +#define AMDKFD_IOC_DBG_UNREGISTER_DEPRECATED \ AMDKFD_IOW(0x0E, struct kfd_ioctl_dbg_unregister_args) -#define AMDKFD_IOC_DBG_ADDRESS_WATCH \ +#define AMDKFD_IOC_DBG_ADDRESS_WATCH_DEPRECATED \ AMDKFD_IOW(0x0F, struct kfd_ioctl_dbg_address_watch_args) -#define AMDKFD_IOC_DBG_WAVE_CONTROL \ +#define AMDKFD_IOC_DBG_WAVE_CONTROL_DEPRECATED \ AMDKFD_IOW(0x10, struct kfd_ioctl_dbg_wave_control_args) #define AMDKFD_IOC_SET_SCRATCH_BACKING_VA \ @@ -571,7 +1543,27 @@ enum kfd_mmio_remap { #define AMDKFD_IOC_SMI_EVENTS \ AMDKFD_IOWR(0x1F, struct kfd_ioctl_smi_events_args) +#define AMDKFD_IOC_SVM AMDKFD_IOWR(0x20, struct kfd_ioctl_svm_args) + +#define AMDKFD_IOC_SET_XNACK_MODE \ + AMDKFD_IOWR(0x21, struct kfd_ioctl_set_xnack_mode_args) + +#define AMDKFD_IOC_CRIU_OP \ + AMDKFD_IOWR(0x22, struct kfd_ioctl_criu_args) + +#define AMDKFD_IOC_AVAILABLE_MEMORY \ + AMDKFD_IOWR(0x23, struct kfd_ioctl_get_available_memory_args) + +#define AMDKFD_IOC_EXPORT_DMABUF \ + AMDKFD_IOWR(0x24, struct kfd_ioctl_export_dmabuf_args) + +#define AMDKFD_IOC_RUNTIME_ENABLE \ + AMDKFD_IOWR(0x25, struct kfd_ioctl_runtime_enable_args) + +#define AMDKFD_IOC_DBG_TRAP \ + AMDKFD_IOWR(0x26, struct kfd_ioctl_dbg_trap_args) + #define AMDKFD_COMMAND_START 0x01 -#define AMDKFD_COMMAND_END 0x20 +#define AMDKFD_COMMAND_END 0x27 #endif diff --git a/linux-headers/include/linux/kfd_sysfs.h b/linux-headers/include/linux/kfd_sysfs.h new file mode 100644 index 00000000000..a51b7331e0b --- /dev/null +++ b/linux-headers/include/linux/kfd_sysfs.h @@ -0,0 +1,123 @@ +/* SPDX-License-Identifier: (GPL-2.0 WITH Linux-syscall-note) OR MIT */ +/* + * Copyright 2021 Advanced Micro Devices, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef KFD_SYSFS_H_INCLUDED +#define KFD_SYSFS_H_INCLUDED + +/* Capability bits in node properties */ +#define HSA_CAP_HOT_PLUGGABLE 0x00000001 +#define HSA_CAP_ATS_PRESENT 0x00000002 +#define HSA_CAP_SHARED_WITH_GRAPHICS 0x00000004 +#define HSA_CAP_QUEUE_SIZE_POW2 0x00000008 +#define HSA_CAP_QUEUE_SIZE_32BIT 0x00000010 +#define HSA_CAP_QUEUE_IDLE_EVENT 0x00000020 +#define HSA_CAP_VA_LIMIT 0x00000040 +#define HSA_CAP_WATCH_POINTS_SUPPORTED 0x00000080 +#define HSA_CAP_WATCH_POINTS_TOTALBITS_MASK 0x00000f00 +#define HSA_CAP_WATCH_POINTS_TOTALBITS_SHIFT 8 +#define HSA_CAP_DOORBELL_TYPE_TOTALBITS_MASK 0x00003000 +#define HSA_CAP_DOORBELL_TYPE_TOTALBITS_SHIFT 12 + +#define HSA_CAP_DOORBELL_TYPE_PRE_1_0 0x0 +#define HSA_CAP_DOORBELL_TYPE_1_0 0x1 +#define HSA_CAP_DOORBELL_TYPE_2_0 0x2 +#define HSA_CAP_AQL_QUEUE_DOUBLE_MAP 0x00004000 + +#define HSA_CAP_TRAP_DEBUG_SUPPORT 0x00008000 +#define HSA_CAP_TRAP_DEBUG_WAVE_LAUNCH_TRAP_OVERRIDE_SUPPORTED 0x00010000 +#define HSA_CAP_TRAP_DEBUG_WAVE_LAUNCH_MODE_SUPPORTED 0x00020000 +#define HSA_CAP_TRAP_DEBUG_PRECISE_MEMORY_OPERATIONS_SUPPORTED 0x00040000 + +/* Old buggy user mode depends on this being 0 */ +#define HSA_CAP_RESERVED_WAS_SRAM_EDCSUPPORTED 0x00080000 + +#define HSA_CAP_MEM_EDCSUPPORTED 0x00100000 +#define HSA_CAP_RASEVENTNOTIFY 0x00200000 +#define HSA_CAP_ASIC_REVISION_MASK 0x03c00000 +#define HSA_CAP_ASIC_REVISION_SHIFT 22 +#define HSA_CAP_SRAM_EDCSUPPORTED 0x04000000 +#define HSA_CAP_SVMAPI_SUPPORTED 0x08000000 +#define HSA_CAP_FLAGS_COHERENTHOSTACCESS 0x10000000 +#define HSA_CAP_TRAP_DEBUG_FIRMWARE_SUPPORTED 0x20000000 +#define HSA_CAP_RESERVED 0xe00f8000 + +/* debug_prop bits in node properties */ +#define HSA_DBG_WATCH_ADDR_MASK_LO_BIT_MASK 0x0000000f +#define HSA_DBG_WATCH_ADDR_MASK_LO_BIT_SHIFT 0 +#define HSA_DBG_WATCH_ADDR_MASK_HI_BIT_MASK 0x000003f0 +#define HSA_DBG_WATCH_ADDR_MASK_HI_BIT_SHIFT 4 +#define HSA_DBG_DISPATCH_INFO_ALWAYS_VALID 0x00000400 +#define HSA_DBG_WATCHPOINTS_EXCLUSIVE 0x00000800 +#define HSA_DBG_RESERVED 0xfffffffffffff000ull + +/* Heap types in memory properties */ +#define HSA_MEM_HEAP_TYPE_SYSTEM 0 +#define HSA_MEM_HEAP_TYPE_FB_PUBLIC 1 +#define HSA_MEM_HEAP_TYPE_FB_PRIVATE 2 +#define HSA_MEM_HEAP_TYPE_GPU_GDS 3 +#define HSA_MEM_HEAP_TYPE_GPU_LDS 4 +#define HSA_MEM_HEAP_TYPE_GPU_SCRATCH 5 + +/* Flag bits in memory properties */ +#define HSA_MEM_FLAGS_HOT_PLUGGABLE 0x00000001 +#define HSA_MEM_FLAGS_NON_VOLATILE 0x00000002 +#define HSA_MEM_FLAGS_RESERVED 0xfffffffc + +/* Cache types in cache properties */ +#define HSA_CACHE_TYPE_DATA 0x00000001 +#define HSA_CACHE_TYPE_INSTRUCTION 0x00000002 +#define HSA_CACHE_TYPE_CPU 0x00000004 +#define HSA_CACHE_TYPE_HSACU 0x00000008 +#define HSA_CACHE_TYPE_RESERVED 0xfffffff0 + +/* Link types in IO link properties (matches CRAT link types) */ +#define HSA_IOLINK_TYPE_UNDEFINED 0 +#define HSA_IOLINK_TYPE_HYPERTRANSPORT 1 +#define HSA_IOLINK_TYPE_PCIEXPRESS 2 +#define HSA_IOLINK_TYPE_AMBA 3 +#define HSA_IOLINK_TYPE_MIPI 4 +#define HSA_IOLINK_TYPE_QPI_1_1 5 +#define HSA_IOLINK_TYPE_RESERVED1 6 +#define HSA_IOLINK_TYPE_RESERVED2 7 +#define HSA_IOLINK_TYPE_RAPID_IO 8 +#define HSA_IOLINK_TYPE_INFINIBAND 9 +#define HSA_IOLINK_TYPE_RESERVED3 10 +#define HSA_IOLINK_TYPE_XGMI 11 +#define HSA_IOLINK_TYPE_XGOP 12 +#define HSA_IOLINK_TYPE_GZ 13 +#define HSA_IOLINK_TYPE_ETHERNET_RDMA 14 +#define HSA_IOLINK_TYPE_RDMA_OTHER 15 +#define HSA_IOLINK_TYPE_OTHER 16 + +/* Flag bits in IO link properties (matches CRAT flags, excluding the + * bi-directional flag, which is not offially part of the CRAT spec, and + * only used internally in KFD) + */ +#define HSA_IOLINK_FLAGS_ENABLED (1 << 0) +#define HSA_IOLINK_FLAGS_NON_COHERENT (1 << 1) +#define HSA_IOLINK_FLAGS_NO_ATOMICS_32_BIT (1 << 2) +#define HSA_IOLINK_FLAGS_NO_ATOMICS_64_BIT (1 << 3) +#define HSA_IOLINK_FLAGS_NO_PEER_TO_PEER_DMA (1 << 4) +#define HSA_IOLINK_FLAGS_RESERVED 0xffffffe0 + +#endif diff --git a/linux-headers/include/linux/kvm.h b/linux-headers/include/linux/kvm.h new file mode 100644 index 00000000000..0d74ee999aa --- /dev/null +++ b/linux-headers/include/linux/kvm.h @@ -0,0 +1,2255 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_KVM_H +#define __LINUX_KVM_H + +/* + * Userspace interface for /dev/kvm - kernel based virtual machine + * + * Note: you must update KVM_API_VERSION if you change this interface. + */ + +#include +#include + +#include +#include + +#define KVM_API_VERSION 12 + +/* *** Deprecated interfaces *** */ + +#define KVM_TRC_SHIFT 16 + +#define KVM_TRC_ENTRYEXIT (1 << KVM_TRC_SHIFT) +#define KVM_TRC_HANDLER (1 << (KVM_TRC_SHIFT + 1)) + +#define KVM_TRC_VMENTRY (KVM_TRC_ENTRYEXIT + 0x01) +#define KVM_TRC_VMEXIT (KVM_TRC_ENTRYEXIT + 0x02) +#define KVM_TRC_PAGE_FAULT (KVM_TRC_HANDLER + 0x01) + +#define KVM_TRC_HEAD_SIZE 12 +#define KVM_TRC_CYCLE_SIZE 8 +#define KVM_TRC_EXTRA_MAX 7 + +#define KVM_TRC_INJ_VIRQ (KVM_TRC_HANDLER + 0x02) +#define KVM_TRC_REDELIVER_EVT (KVM_TRC_HANDLER + 0x03) +#define KVM_TRC_PEND_INTR (KVM_TRC_HANDLER + 0x04) +#define KVM_TRC_IO_READ (KVM_TRC_HANDLER + 0x05) +#define KVM_TRC_IO_WRITE (KVM_TRC_HANDLER + 0x06) +#define KVM_TRC_CR_READ (KVM_TRC_HANDLER + 0x07) +#define KVM_TRC_CR_WRITE (KVM_TRC_HANDLER + 0x08) +#define KVM_TRC_DR_READ (KVM_TRC_HANDLER + 0x09) +#define KVM_TRC_DR_WRITE (KVM_TRC_HANDLER + 0x0A) +#define KVM_TRC_MSR_READ (KVM_TRC_HANDLER + 0x0B) +#define KVM_TRC_MSR_WRITE (KVM_TRC_HANDLER + 0x0C) +#define KVM_TRC_CPUID (KVM_TRC_HANDLER + 0x0D) +#define KVM_TRC_INTR (KVM_TRC_HANDLER + 0x0E) +#define KVM_TRC_NMI (KVM_TRC_HANDLER + 0x0F) +#define KVM_TRC_VMMCALL (KVM_TRC_HANDLER + 0x10) +#define KVM_TRC_HLT (KVM_TRC_HANDLER + 0x11) +#define KVM_TRC_CLTS (KVM_TRC_HANDLER + 0x12) +#define KVM_TRC_LMSW (KVM_TRC_HANDLER + 0x13) +#define KVM_TRC_APIC_ACCESS (KVM_TRC_HANDLER + 0x14) +#define KVM_TRC_TDP_FAULT (KVM_TRC_HANDLER + 0x15) +#define KVM_TRC_GTLB_WRITE (KVM_TRC_HANDLER + 0x16) +#define KVM_TRC_STLB_WRITE (KVM_TRC_HANDLER + 0x17) +#define KVM_TRC_STLB_INVAL (KVM_TRC_HANDLER + 0x18) +#define KVM_TRC_PPC_INSTR (KVM_TRC_HANDLER + 0x19) + +struct kvm_user_trace_setup { + __u32 buf_size; + __u32 buf_nr; +}; + +#define __KVM_DEPRECATED_MAIN_W_0x06 \ + _IOW(KVMIO, 0x06, struct kvm_user_trace_setup) +#define __KVM_DEPRECATED_MAIN_0x07 _IO(KVMIO, 0x07) +#define __KVM_DEPRECATED_MAIN_0x08 _IO(KVMIO, 0x08) + +#define __KVM_DEPRECATED_VM_R_0x70 _IOR(KVMIO, 0x70, struct kvm_assigned_irq) + +struct kvm_breakpoint { + __u32 enabled; + __u32 padding; + __u64 address; +}; + +struct kvm_debug_guest { + __u32 enabled; + __u32 pad; + struct kvm_breakpoint breakpoints[4]; + __u32 singlestep; +}; + +#define __KVM_DEPRECATED_VCPU_W_0x87 _IOW(KVMIO, 0x87, struct kvm_debug_guest) + +/* *** End of deprecated interfaces *** */ + + +/* for KVM_SET_USER_MEMORY_REGION */ +struct kvm_userspace_memory_region { + __u32 slot; + __u32 flags; + __u64 guest_phys_addr; + __u64 memory_size; /* bytes */ + __u64 userspace_addr; /* start of the userspace allocated memory */ +}; + +/* + * The bit 0 ~ bit 15 of kvm_userspace_memory_region::flags are visible for + * userspace, other bits are reserved for kvm internal use which are defined + * in include/linux/kvm_host.h. + */ +#define KVM_MEM_LOG_DIRTY_PAGES (1UL << 0) +#define KVM_MEM_READONLY (1UL << 1) + +/* for KVM_IRQ_LINE */ +struct kvm_irq_level { + /* + * ACPI gsi notion of irq. + * For IA-64 (APIC model) IOAPIC0: irq 0-23; IOAPIC1: irq 24-47.. + * For X86 (standard AT mode) PIC0/1: irq 0-15. IOAPIC0: 0-23.. + * For ARM: See Documentation/virt/kvm/api.rst + */ + union { + __u32 irq; + __s32 status; + }; + __u32 level; +}; + + +struct kvm_irqchip { + __u32 chip_id; + __u32 pad; + union { + char dummy[512]; /* reserving space */ +#ifdef __KVM_HAVE_PIT + struct kvm_pic_state pic; +#endif +#ifdef __KVM_HAVE_IOAPIC + struct kvm_ioapic_state ioapic; +#endif + } chip; +}; + +/* for KVM_CREATE_PIT2 */ +struct kvm_pit_config { + __u32 flags; + __u32 pad[15]; +}; + +#define KVM_PIT_SPEAKER_DUMMY 1 + +struct kvm_s390_skeys { + __u64 start_gfn; + __u64 count; + __u64 skeydata_addr; + __u32 flags; + __u32 reserved[9]; +}; + +#define KVM_S390_CMMA_PEEK (1 << 0) + +/** + * kvm_s390_cmma_log - Used for CMMA migration. + * + * Used both for input and output. + * + * @start_gfn: Guest page number to start from. + * @count: Size of the result buffer. + * @flags: Control operation mode via KVM_S390_CMMA_* flags + * @remaining: Used with KVM_S390_GET_CMMA_BITS. Indicates how many dirty + * pages are still remaining. + * @mask: Used with KVM_S390_SET_CMMA_BITS. Bitmap of bits to actually set + * in the PGSTE. + * @values: Pointer to the values buffer. + * + * Used in KVM_S390_{G,S}ET_CMMA_BITS ioctls. + */ +struct kvm_s390_cmma_log { + __u64 start_gfn; + __u32 count; + __u32 flags; + union { + __u64 remaining; + __u64 mask; + }; + __u64 values; +}; + +struct kvm_hyperv_exit { +#define KVM_EXIT_HYPERV_SYNIC 1 +#define KVM_EXIT_HYPERV_HCALL 2 +#define KVM_EXIT_HYPERV_SYNDBG 3 + __u32 type; + __u32 pad1; + union { + struct { + __u32 msr; + __u32 pad2; + __u64 control; + __u64 evt_page; + __u64 msg_page; + } synic; + struct { + __u64 input; + __u64 result; + __u64 params[2]; + } hcall; + struct { + __u32 msr; + __u32 pad2; + __u64 control; + __u64 status; + __u64 send_page; + __u64 recv_page; + __u64 pending_page; + } syndbg; + } u; +}; + +struct kvm_xen_exit { +#define KVM_EXIT_XEN_HCALL 1 + __u32 type; + union { + struct { + __u32 longmode; + __u32 cpl; + __u64 input; + __u64 result; + __u64 params[6]; + } hcall; + } u; +}; + +#define KVM_S390_GET_SKEYS_NONE 1 +#define KVM_S390_SKEYS_MAX 1048576 + +#define KVM_EXIT_UNKNOWN 0 +#define KVM_EXIT_EXCEPTION 1 +#define KVM_EXIT_IO 2 +#define KVM_EXIT_HYPERCALL 3 +#define KVM_EXIT_DEBUG 4 +#define KVM_EXIT_HLT 5 +#define KVM_EXIT_MMIO 6 +#define KVM_EXIT_IRQ_WINDOW_OPEN 7 +#define KVM_EXIT_SHUTDOWN 8 +#define KVM_EXIT_FAIL_ENTRY 9 +#define KVM_EXIT_INTR 10 +#define KVM_EXIT_SET_TPR 11 +#define KVM_EXIT_TPR_ACCESS 12 +#define KVM_EXIT_S390_SIEIC 13 +#define KVM_EXIT_S390_RESET 14 +#define KVM_EXIT_DCR 15 /* deprecated */ +#define KVM_EXIT_NMI 16 +#define KVM_EXIT_INTERNAL_ERROR 17 +#define KVM_EXIT_OSI 18 +#define KVM_EXIT_PAPR_HCALL 19 +#define KVM_EXIT_S390_UCONTROL 20 +#define KVM_EXIT_WATCHDOG 21 +#define KVM_EXIT_S390_TSCH 22 +#define KVM_EXIT_EPR 23 +#define KVM_EXIT_SYSTEM_EVENT 24 +#define KVM_EXIT_S390_STSI 25 +#define KVM_EXIT_IOAPIC_EOI 26 +#define KVM_EXIT_HYPERV 27 +#define KVM_EXIT_ARM_NISV 28 +#define KVM_EXIT_X86_RDMSR 29 +#define KVM_EXIT_X86_WRMSR 30 +#define KVM_EXIT_DIRTY_RING_FULL 31 +#define KVM_EXIT_AP_RESET_HOLD 32 +#define KVM_EXIT_X86_BUS_LOCK 33 +#define KVM_EXIT_XEN 34 +#define KVM_EXIT_RISCV_SBI 35 +#define KVM_EXIT_RISCV_CSR 36 +#define KVM_EXIT_NOTIFY 37 + +/* For KVM_EXIT_INTERNAL_ERROR */ +/* Emulate instruction failed. */ +#define KVM_INTERNAL_ERROR_EMULATION 1 +/* Encounter unexpected simultaneous exceptions. */ +#define KVM_INTERNAL_ERROR_SIMUL_EX 2 +/* Encounter unexpected vm-exit due to delivery event. */ +#define KVM_INTERNAL_ERROR_DELIVERY_EV 3 +/* Encounter unexpected vm-exit reason */ +#define KVM_INTERNAL_ERROR_UNEXPECTED_EXIT_REASON 4 + +/* Flags that describe what fields in emulation_failure hold valid data. */ +#define KVM_INTERNAL_ERROR_EMULATION_FLAG_INSTRUCTION_BYTES (1ULL << 0) + +/* for KVM_RUN, returned by mmap(vcpu_fd, offset=0) */ +struct kvm_run { + /* in */ + __u8 request_interrupt_window; + __u8 immediate_exit; + __u8 padding1[6]; + + /* out */ + __u32 exit_reason; + __u8 ready_for_interrupt_injection; + __u8 if_flag; + __u16 flags; + + /* in (pre_kvm_run), out (post_kvm_run) */ + __u64 cr8; + __u64 apic_base; + +#ifdef __KVM_S390 + /* the processor status word for s390 */ + __u64 psw_mask; /* psw upper half */ + __u64 psw_addr; /* psw lower half */ +#endif + union { + /* KVM_EXIT_UNKNOWN */ + struct { + __u64 hardware_exit_reason; + } hw; + /* KVM_EXIT_FAIL_ENTRY */ + struct { + __u64 hardware_entry_failure_reason; + __u32 cpu; + } fail_entry; + /* KVM_EXIT_EXCEPTION */ + struct { + __u32 exception; + __u32 error_code; + } ex; + /* KVM_EXIT_IO */ + struct { +#define KVM_EXIT_IO_IN 0 +#define KVM_EXIT_IO_OUT 1 + __u8 direction; + __u8 size; /* bytes */ + __u16 port; + __u32 count; + __u64 data_offset; /* relative to kvm_run start */ + } io; + /* KVM_EXIT_DEBUG */ + struct { + struct kvm_debug_exit_arch arch; + } debug; + /* KVM_EXIT_MMIO */ + struct { + __u64 phys_addr; + __u8 data[8]; + __u32 len; + __u8 is_write; + } mmio; + /* KVM_EXIT_HYPERCALL */ + struct { + __u64 nr; + __u64 args[6]; + __u64 ret; + + union { + __u32 longmode; + __u64 flags; + }; + } hypercall; + /* KVM_EXIT_TPR_ACCESS */ + struct { + __u64 rip; + __u32 is_write; + __u32 pad; + } tpr_access; + /* KVM_EXIT_S390_SIEIC */ + struct { + __u8 icptcode; + __u16 ipa; + __u32 ipb; + } s390_sieic; + /* KVM_EXIT_S390_RESET */ +#define KVM_S390_RESET_POR 1 +#define KVM_S390_RESET_CLEAR 2 +#define KVM_S390_RESET_SUBSYSTEM 4 +#define KVM_S390_RESET_CPU_INIT 8 +#define KVM_S390_RESET_IPL 16 + __u64 s390_reset_flags; + /* KVM_EXIT_S390_UCONTROL */ + struct { + __u64 trans_exc_code; + __u32 pgm_code; + } s390_ucontrol; + /* KVM_EXIT_DCR (deprecated) */ + struct { + __u32 dcrn; + __u32 data; + __u8 is_write; + } dcr; + /* KVM_EXIT_INTERNAL_ERROR */ + struct { + __u32 suberror; + /* Available with KVM_CAP_INTERNAL_ERROR_DATA: */ + __u32 ndata; + __u64 data[16]; + } internal; + /* + * KVM_INTERNAL_ERROR_EMULATION + * + * "struct emulation_failure" is an overlay of "struct internal" + * that is used for the KVM_INTERNAL_ERROR_EMULATION sub-type of + * KVM_EXIT_INTERNAL_ERROR. Note, unlike other internal error + * sub-types, this struct is ABI! It also needs to be backwards + * compatible with "struct internal". Take special care that + * "ndata" is correct, that new fields are enumerated in "flags", + * and that each flag enumerates fields that are 64-bit aligned + * and sized (so that ndata+internal.data[] is valid/accurate). + * + * Space beyond the defined fields may be used to store arbitrary + * debug information relating to the emulation failure. It is + * accounted for in "ndata" but the format is unspecified and is + * not represented in "flags". Any such information is *not* ABI! + */ + struct { + __u32 suberror; + __u32 ndata; + __u64 flags; + union { + struct { + __u8 insn_size; + __u8 insn_bytes[15]; + }; + }; + /* Arbitrary debug data may follow. */ + } emulation_failure; + /* KVM_EXIT_OSI */ + struct { + __u64 gprs[32]; + } osi; + /* KVM_EXIT_PAPR_HCALL */ + struct { + __u64 nr; + __u64 ret; + __u64 args[9]; + } papr_hcall; + /* KVM_EXIT_S390_TSCH */ + struct { + __u16 subchannel_id; + __u16 subchannel_nr; + __u32 io_int_parm; + __u32 io_int_word; + __u32 ipb; + __u8 dequeued; + } s390_tsch; + /* KVM_EXIT_EPR */ + struct { + __u32 epr; + } epr; + /* KVM_EXIT_SYSTEM_EVENT */ + struct { +#define KVM_SYSTEM_EVENT_SHUTDOWN 1 +#define KVM_SYSTEM_EVENT_RESET 2 +#define KVM_SYSTEM_EVENT_CRASH 3 +#define KVM_SYSTEM_EVENT_WAKEUP 4 +#define KVM_SYSTEM_EVENT_SUSPEND 5 +#define KVM_SYSTEM_EVENT_SEV_TERM 6 + __u32 type; + __u32 ndata; + union { + __u64 flags; + __u64 data[16]; + }; + } system_event; + /* KVM_EXIT_S390_STSI */ + struct { + __u64 addr; + __u8 ar; + __u8 reserved; + __u8 fc; + __u8 sel1; + __u16 sel2; + } s390_stsi; + /* KVM_EXIT_IOAPIC_EOI */ + struct { + __u8 vector; + } eoi; + /* KVM_EXIT_HYPERV */ + struct kvm_hyperv_exit hyperv; + /* KVM_EXIT_ARM_NISV */ + struct { + __u64 esr_iss; + __u64 fault_ipa; + } arm_nisv; + /* KVM_EXIT_X86_RDMSR / KVM_EXIT_X86_WRMSR */ + struct { + __u8 error; /* user -> kernel */ + __u8 pad[7]; +#define KVM_MSR_EXIT_REASON_INVAL (1 << 0) +#define KVM_MSR_EXIT_REASON_UNKNOWN (1 << 1) +#define KVM_MSR_EXIT_REASON_FILTER (1 << 2) +#define KVM_MSR_EXIT_REASON_VALID_MASK (KVM_MSR_EXIT_REASON_INVAL | \ + KVM_MSR_EXIT_REASON_UNKNOWN | \ + KVM_MSR_EXIT_REASON_FILTER) + __u32 reason; /* kernel -> user */ + __u32 index; /* kernel -> user */ + __u64 data; /* kernel <-> user */ + } msr; + /* KVM_EXIT_XEN */ + struct kvm_xen_exit xen; + /* KVM_EXIT_RISCV_SBI */ + struct { + unsigned long extension_id; + unsigned long function_id; + unsigned long args[6]; + unsigned long ret[2]; + } riscv_sbi; + /* KVM_EXIT_RISCV_CSR */ + struct { + unsigned long csr_num; + unsigned long new_value; + unsigned long write_mask; + unsigned long ret_value; + } riscv_csr; + /* KVM_EXIT_NOTIFY */ + struct { +#define KVM_NOTIFY_CONTEXT_INVALID (1 << 0) + __u32 flags; + } notify; + /* Fix the size of the union. */ + char padding[256]; + }; + + /* 2048 is the size of the char array used to bound/pad the size + * of the union that holds sync regs. + */ + #define SYNC_REGS_SIZE_BYTES 2048 + /* + * shared registers between kvm and userspace. + * kvm_valid_regs specifies the register classes set by the host + * kvm_dirty_regs specified the register classes dirtied by userspace + * struct kvm_sync_regs is architecture specific, as well as the + * bits for kvm_valid_regs and kvm_dirty_regs + */ + __u64 kvm_valid_regs; + __u64 kvm_dirty_regs; + union { + struct kvm_sync_regs regs; + char padding[SYNC_REGS_SIZE_BYTES]; + } s; +}; + +/* for KVM_REGISTER_COALESCED_MMIO / KVM_UNREGISTER_COALESCED_MMIO */ + +struct kvm_coalesced_mmio_zone { + __u64 addr; + __u32 size; + union { + __u32 pad; + __u32 pio; + }; +}; + +struct kvm_coalesced_mmio { + __u64 phys_addr; + __u32 len; + union { + __u32 pad; + __u32 pio; + }; + __u8 data[8]; +}; + +struct kvm_coalesced_mmio_ring { + __u32 first, last; + struct kvm_coalesced_mmio coalesced_mmio[]; +}; + +#define KVM_COALESCED_MMIO_MAX \ + ((PAGE_SIZE - sizeof(struct kvm_coalesced_mmio_ring)) / \ + sizeof(struct kvm_coalesced_mmio)) + +/* for KVM_TRANSLATE */ +struct kvm_translation { + /* in */ + __u64 linear_address; + + /* out */ + __u64 physical_address; + __u8 valid; + __u8 writeable; + __u8 usermode; + __u8 pad[5]; +}; + +/* for KVM_S390_MEM_OP */ +struct kvm_s390_mem_op { + /* in */ + __u64 gaddr; /* the guest address */ + __u64 flags; /* flags */ + __u32 size; /* amount of bytes */ + __u32 op; /* type of operation */ + __u64 buf; /* buffer in userspace */ + union { + struct { + __u8 ar; /* the access register number */ + __u8 key; /* access key, ignored if flag unset */ + __u8 pad1[6]; /* ignored */ + __u64 old_addr; /* ignored if cmpxchg flag unset */ + }; + __u32 sida_offset; /* offset into the sida */ + __u8 reserved[32]; /* ignored */ + }; +}; +/* types for kvm_s390_mem_op->op */ +#define KVM_S390_MEMOP_LOGICAL_READ 0 +#define KVM_S390_MEMOP_LOGICAL_WRITE 1 +#define KVM_S390_MEMOP_SIDA_READ 2 +#define KVM_S390_MEMOP_SIDA_WRITE 3 +#define KVM_S390_MEMOP_ABSOLUTE_READ 4 +#define KVM_S390_MEMOP_ABSOLUTE_WRITE 5 +#define KVM_S390_MEMOP_ABSOLUTE_CMPXCHG 6 + +/* flags for kvm_s390_mem_op->flags */ +#define KVM_S390_MEMOP_F_CHECK_ONLY (1ULL << 0) +#define KVM_S390_MEMOP_F_INJECT_EXCEPTION (1ULL << 1) +#define KVM_S390_MEMOP_F_SKEY_PROTECTION (1ULL << 2) + +/* flags specifying extension support via KVM_CAP_S390_MEM_OP_EXTENSION */ +#define KVM_S390_MEMOP_EXTENSION_CAP_BASE (1 << 0) +#define KVM_S390_MEMOP_EXTENSION_CAP_CMPXCHG (1 << 1) + +/* for KVM_INTERRUPT */ +struct kvm_interrupt { + /* in */ + __u32 irq; +}; + +/* for KVM_GET_DIRTY_LOG */ +struct kvm_dirty_log { + __u32 slot; + __u32 padding1; + union { + void *dirty_bitmap; /* one bit per page */ + __u64 padding2; + }; +}; + +/* for KVM_CLEAR_DIRTY_LOG */ +struct kvm_clear_dirty_log { + __u32 slot; + __u32 num_pages; + __u64 first_page; + union { + void *dirty_bitmap; /* one bit per page */ + __u64 padding2; + }; +}; + +/* for KVM_SET_SIGNAL_MASK */ +struct kvm_signal_mask { + __u32 len; + __u8 sigset[]; +}; + +/* for KVM_TPR_ACCESS_REPORTING */ +struct kvm_tpr_access_ctl { + __u32 enabled; + __u32 flags; + __u32 reserved[8]; +}; + +/* for KVM_SET_VAPIC_ADDR */ +struct kvm_vapic_addr { + __u64 vapic_addr; +}; + +/* for KVM_SET_MP_STATE */ + +/* not all states are valid on all architectures */ +#define KVM_MP_STATE_RUNNABLE 0 +#define KVM_MP_STATE_UNINITIALIZED 1 +#define KVM_MP_STATE_INIT_RECEIVED 2 +#define KVM_MP_STATE_HALTED 3 +#define KVM_MP_STATE_SIPI_RECEIVED 4 +#define KVM_MP_STATE_STOPPED 5 +#define KVM_MP_STATE_CHECK_STOP 6 +#define KVM_MP_STATE_OPERATING 7 +#define KVM_MP_STATE_LOAD 8 +#define KVM_MP_STATE_AP_RESET_HOLD 9 +#define KVM_MP_STATE_SUSPENDED 10 + +struct kvm_mp_state { + __u32 mp_state; +}; + +struct kvm_s390_psw { + __u64 mask; + __u64 addr; +}; + +/* valid values for type in kvm_s390_interrupt */ +#define KVM_S390_SIGP_STOP 0xfffe0000u +#define KVM_S390_PROGRAM_INT 0xfffe0001u +#define KVM_S390_SIGP_SET_PREFIX 0xfffe0002u +#define KVM_S390_RESTART 0xfffe0003u +#define KVM_S390_INT_PFAULT_INIT 0xfffe0004u +#define KVM_S390_INT_PFAULT_DONE 0xfffe0005u +#define KVM_S390_MCHK 0xfffe1000u +#define KVM_S390_INT_CLOCK_COMP 0xffff1004u +#define KVM_S390_INT_CPU_TIMER 0xffff1005u +#define KVM_S390_INT_VIRTIO 0xffff2603u +#define KVM_S390_INT_SERVICE 0xffff2401u +#define KVM_S390_INT_EMERGENCY 0xffff1201u +#define KVM_S390_INT_EXTERNAL_CALL 0xffff1202u +/* Anything below 0xfffe0000u is taken by INT_IO */ +#define KVM_S390_INT_IO(ai,cssid,ssid,schid) \ + (((schid)) | \ + ((ssid) << 16) | \ + ((cssid) << 18) | \ + ((ai) << 26)) +#define KVM_S390_INT_IO_MIN 0x00000000u +#define KVM_S390_INT_IO_MAX 0xfffdffffu +#define KVM_S390_INT_IO_AI_MASK 0x04000000u + + +struct kvm_s390_interrupt { + __u32 type; + __u32 parm; + __u64 parm64; +}; + +struct kvm_s390_io_info { + __u16 subchannel_id; + __u16 subchannel_nr; + __u32 io_int_parm; + __u32 io_int_word; +}; + +struct kvm_s390_ext_info { + __u32 ext_params; + __u32 pad; + __u64 ext_params2; +}; + +struct kvm_s390_pgm_info { + __u64 trans_exc_code; + __u64 mon_code; + __u64 per_address; + __u32 data_exc_code; + __u16 code; + __u16 mon_class_nr; + __u8 per_code; + __u8 per_atmid; + __u8 exc_access_id; + __u8 per_access_id; + __u8 op_access_id; +#define KVM_S390_PGM_FLAGS_ILC_VALID 0x01 +#define KVM_S390_PGM_FLAGS_ILC_0 0x02 +#define KVM_S390_PGM_FLAGS_ILC_1 0x04 +#define KVM_S390_PGM_FLAGS_ILC_MASK 0x06 +#define KVM_S390_PGM_FLAGS_NO_REWIND 0x08 + __u8 flags; + __u8 pad[2]; +}; + +struct kvm_s390_prefix_info { + __u32 address; +}; + +struct kvm_s390_extcall_info { + __u16 code; +}; + +struct kvm_s390_emerg_info { + __u16 code; +}; + +#define KVM_S390_STOP_FLAG_STORE_STATUS 0x01 +struct kvm_s390_stop_info { + __u32 flags; +}; + +struct kvm_s390_mchk_info { + __u64 cr14; + __u64 mcic; + __u64 failing_storage_address; + __u32 ext_damage_code; + __u32 pad; + __u8 fixed_logout[16]; +}; + +struct kvm_s390_irq { + __u64 type; + union { + struct kvm_s390_io_info io; + struct kvm_s390_ext_info ext; + struct kvm_s390_pgm_info pgm; + struct kvm_s390_emerg_info emerg; + struct kvm_s390_extcall_info extcall; + struct kvm_s390_prefix_info prefix; + struct kvm_s390_stop_info stop; + struct kvm_s390_mchk_info mchk; + char reserved[64]; + } u; +}; + +struct kvm_s390_irq_state { + __u64 buf; + __u32 flags; /* will stay unused for compatibility reasons */ + __u32 len; + __u32 reserved[4]; /* will stay unused for compatibility reasons */ +}; + +/* for KVM_SET_GUEST_DEBUG */ + +#define KVM_GUESTDBG_ENABLE 0x00000001 +#define KVM_GUESTDBG_SINGLESTEP 0x00000002 + +struct kvm_guest_debug { + __u32 control; + __u32 pad; + struct kvm_guest_debug_arch arch; +}; + +enum { + kvm_ioeventfd_flag_nr_datamatch, + kvm_ioeventfd_flag_nr_pio, + kvm_ioeventfd_flag_nr_deassign, + kvm_ioeventfd_flag_nr_virtio_ccw_notify, + kvm_ioeventfd_flag_nr_fast_mmio, + kvm_ioeventfd_flag_nr_max, +}; + +#define KVM_IOEVENTFD_FLAG_DATAMATCH (1 << kvm_ioeventfd_flag_nr_datamatch) +#define KVM_IOEVENTFD_FLAG_PIO (1 << kvm_ioeventfd_flag_nr_pio) +#define KVM_IOEVENTFD_FLAG_DEASSIGN (1 << kvm_ioeventfd_flag_nr_deassign) +#define KVM_IOEVENTFD_FLAG_VIRTIO_CCW_NOTIFY \ + (1 << kvm_ioeventfd_flag_nr_virtio_ccw_notify) + +#define KVM_IOEVENTFD_VALID_FLAG_MASK ((1 << kvm_ioeventfd_flag_nr_max) - 1) + +struct kvm_ioeventfd { + __u64 datamatch; + __u64 addr; /* legal pio/mmio address */ + __u32 len; /* 1, 2, 4, or 8 bytes; or 0 to ignore length */ + __s32 fd; + __u32 flags; + __u8 pad[36]; +}; + +#define KVM_X86_DISABLE_EXITS_MWAIT (1 << 0) +#define KVM_X86_DISABLE_EXITS_HLT (1 << 1) +#define KVM_X86_DISABLE_EXITS_PAUSE (1 << 2) +#define KVM_X86_DISABLE_EXITS_CSTATE (1 << 3) +#define KVM_X86_DISABLE_VALID_EXITS (KVM_X86_DISABLE_EXITS_MWAIT | \ + KVM_X86_DISABLE_EXITS_HLT | \ + KVM_X86_DISABLE_EXITS_PAUSE | \ + KVM_X86_DISABLE_EXITS_CSTATE) + +/* for KVM_ENABLE_CAP */ +struct kvm_enable_cap { + /* in */ + __u32 cap; + __u32 flags; + __u64 args[4]; + __u8 pad[64]; +}; + +/* for KVM_PPC_GET_PVINFO */ + +#define KVM_PPC_PVINFO_FLAGS_EV_IDLE (1<<0) + +struct kvm_ppc_pvinfo { + /* out */ + __u32 flags; + __u32 hcall[4]; + __u8 pad[108]; +}; + +/* for KVM_PPC_GET_SMMU_INFO */ +#define KVM_PPC_PAGE_SIZES_MAX_SZ 8 + +struct kvm_ppc_one_page_size { + __u32 page_shift; /* Page shift (or 0) */ + __u32 pte_enc; /* Encoding in the HPTE (>>12) */ +}; + +struct kvm_ppc_one_seg_page_size { + __u32 page_shift; /* Base page shift of segment (or 0) */ + __u32 slb_enc; /* SLB encoding for BookS */ + struct kvm_ppc_one_page_size enc[KVM_PPC_PAGE_SIZES_MAX_SZ]; +}; + +#define KVM_PPC_PAGE_SIZES_REAL 0x00000001 +#define KVM_PPC_1T_SEGMENTS 0x00000002 +#define KVM_PPC_NO_HASH 0x00000004 + +struct kvm_ppc_smmu_info { + __u64 flags; + __u32 slb_size; + __u16 data_keys; /* # storage keys supported for data */ + __u16 instr_keys; /* # storage keys supported for instructions */ + struct kvm_ppc_one_seg_page_size sps[KVM_PPC_PAGE_SIZES_MAX_SZ]; +}; + +/* for KVM_PPC_RESIZE_HPT_{PREPARE,COMMIT} */ +struct kvm_ppc_resize_hpt { + __u64 flags; + __u32 shift; + __u32 pad; +}; + +#define KVMIO 0xAE + +/* machine type bits, to be used as argument to KVM_CREATE_VM */ +#define KVM_VM_S390_UCONTROL 1 + +/* on ppc, 0 indicate default, 1 should force HV and 2 PR */ +#define KVM_VM_PPC_HV 1 +#define KVM_VM_PPC_PR 2 + +/* on MIPS, 0 indicates auto, 1 forces VZ ASE, 2 forces trap & emulate */ +#define KVM_VM_MIPS_AUTO 0 +#define KVM_VM_MIPS_VZ 1 +#define KVM_VM_MIPS_TE 2 + +#define KVM_S390_SIE_PAGE_OFFSET 1 + +/* + * On arm64, machine type can be used to request the physical + * address size for the VM. Bits[7-0] are reserved for the guest + * PA size shift (i.e, log2(PA_Size)). For backward compatibility, + * value 0 implies the default IPA size, 40bits. + */ +#define KVM_VM_TYPE_ARM_IPA_SIZE_MASK 0xffULL +#define KVM_VM_TYPE_ARM_IPA_SIZE(x) \ + ((x) & KVM_VM_TYPE_ARM_IPA_SIZE_MASK) +/* + * ioctls for /dev/kvm fds: + */ +#define KVM_GET_API_VERSION _IO(KVMIO, 0x00) +#define KVM_CREATE_VM _IO(KVMIO, 0x01) /* returns a VM fd */ +#define KVM_GET_MSR_INDEX_LIST _IOWR(KVMIO, 0x02, struct kvm_msr_list) + +#define KVM_S390_ENABLE_SIE _IO(KVMIO, 0x06) +/* + * Check if a kvm extension is available. Argument is extension number, + * return is 1 (yes) or 0 (no, sorry). + */ +#define KVM_CHECK_EXTENSION _IO(KVMIO, 0x03) +/* + * Get size for mmap(vcpu_fd) + */ +#define KVM_GET_VCPU_MMAP_SIZE _IO(KVMIO, 0x04) /* in bytes */ +#define KVM_GET_SUPPORTED_CPUID _IOWR(KVMIO, 0x05, struct kvm_cpuid2) +#define KVM_TRACE_ENABLE __KVM_DEPRECATED_MAIN_W_0x06 +#define KVM_TRACE_PAUSE __KVM_DEPRECATED_MAIN_0x07 +#define KVM_TRACE_DISABLE __KVM_DEPRECATED_MAIN_0x08 +#define KVM_GET_EMULATED_CPUID _IOWR(KVMIO, 0x09, struct kvm_cpuid2) +#define KVM_GET_MSR_FEATURE_INDEX_LIST _IOWR(KVMIO, 0x0a, struct kvm_msr_list) + +/* + * Extension capability list. + */ +#define KVM_CAP_IRQCHIP 0 +#define KVM_CAP_HLT 1 +#define KVM_CAP_MMU_SHADOW_CACHE_CONTROL 2 +#define KVM_CAP_USER_MEMORY 3 +#define KVM_CAP_SET_TSS_ADDR 4 +#define KVM_CAP_VAPIC 6 +#define KVM_CAP_EXT_CPUID 7 +#define KVM_CAP_CLOCKSOURCE 8 +#define KVM_CAP_NR_VCPUS 9 /* returns recommended max vcpus per vm */ +#define KVM_CAP_NR_MEMSLOTS 10 /* returns max memory slots per vm */ +#define KVM_CAP_PIT 11 +#define KVM_CAP_NOP_IO_DELAY 12 +#define KVM_CAP_PV_MMU 13 +#define KVM_CAP_MP_STATE 14 +#define KVM_CAP_COALESCED_MMIO 15 +#define KVM_CAP_SYNC_MMU 16 /* Changes to host mmap are reflected in guest */ +#define KVM_CAP_IOMMU 18 +/* Bug in KVM_SET_USER_MEMORY_REGION fixed: */ +#define KVM_CAP_DESTROY_MEMORY_REGION_WORKS 21 +#define KVM_CAP_USER_NMI 22 +#ifdef __KVM_HAVE_GUEST_DEBUG +#define KVM_CAP_SET_GUEST_DEBUG 23 +#endif +#ifdef __KVM_HAVE_PIT +#define KVM_CAP_REINJECT_CONTROL 24 +#endif +#define KVM_CAP_IRQ_ROUTING 25 +#define KVM_CAP_IRQ_INJECT_STATUS 26 +#define KVM_CAP_ASSIGN_DEV_IRQ 29 +/* Another bug in KVM_SET_USER_MEMORY_REGION fixed: */ +#define KVM_CAP_JOIN_MEMORY_REGIONS_WORKS 30 +#ifdef __KVM_HAVE_MCE +#define KVM_CAP_MCE 31 +#endif +#define KVM_CAP_IRQFD 32 +#ifdef __KVM_HAVE_PIT +#define KVM_CAP_PIT2 33 +#endif +#define KVM_CAP_SET_BOOT_CPU_ID 34 +#ifdef __KVM_HAVE_PIT_STATE2 +#define KVM_CAP_PIT_STATE2 35 +#endif +#define KVM_CAP_IOEVENTFD 36 +#define KVM_CAP_SET_IDENTITY_MAP_ADDR 37 +#ifdef __KVM_HAVE_XEN_HVM +#define KVM_CAP_XEN_HVM 38 +#endif +#define KVM_CAP_ADJUST_CLOCK 39 +#define KVM_CAP_INTERNAL_ERROR_DATA 40 +#ifdef __KVM_HAVE_VCPU_EVENTS +#define KVM_CAP_VCPU_EVENTS 41 +#endif +#define KVM_CAP_S390_PSW 42 +#define KVM_CAP_PPC_SEGSTATE 43 +#define KVM_CAP_HYPERV 44 +#define KVM_CAP_HYPERV_VAPIC 45 +#define KVM_CAP_HYPERV_SPIN 46 +#define KVM_CAP_PCI_SEGMENT 47 +#define KVM_CAP_PPC_PAIRED_SINGLES 48 +#define KVM_CAP_INTR_SHADOW 49 +#ifdef __KVM_HAVE_DEBUGREGS +#define KVM_CAP_DEBUGREGS 50 +#endif +#define KVM_CAP_X86_ROBUST_SINGLESTEP 51 +#define KVM_CAP_PPC_OSI 52 +#define KVM_CAP_PPC_UNSET_IRQ 53 +#define KVM_CAP_ENABLE_CAP 54 +#ifdef __KVM_HAVE_XSAVE +#define KVM_CAP_XSAVE 55 +#endif +#ifdef __KVM_HAVE_XCRS +#define KVM_CAP_XCRS 56 +#endif +#define KVM_CAP_PPC_GET_PVINFO 57 +#define KVM_CAP_PPC_IRQ_LEVEL 58 +#define KVM_CAP_ASYNC_PF 59 +#define KVM_CAP_TSC_CONTROL 60 +#define KVM_CAP_GET_TSC_KHZ 61 +#define KVM_CAP_PPC_BOOKE_SREGS 62 +#define KVM_CAP_SPAPR_TCE 63 +#define KVM_CAP_PPC_SMT 64 +#define KVM_CAP_PPC_RMA 65 +#define KVM_CAP_MAX_VCPUS 66 /* returns max vcpus per vm */ +#define KVM_CAP_PPC_HIOR 67 +#define KVM_CAP_PPC_PAPR 68 +#define KVM_CAP_SW_TLB 69 +#define KVM_CAP_ONE_REG 70 +#define KVM_CAP_S390_GMAP 71 +#define KVM_CAP_TSC_DEADLINE_TIMER 72 +#define KVM_CAP_S390_UCONTROL 73 +#define KVM_CAP_SYNC_REGS 74 +#define KVM_CAP_PCI_2_3 75 +#define KVM_CAP_KVMCLOCK_CTRL 76 +#define KVM_CAP_SIGNAL_MSI 77 +#define KVM_CAP_PPC_GET_SMMU_INFO 78 +#define KVM_CAP_S390_COW 79 +#define KVM_CAP_PPC_ALLOC_HTAB 80 +#define KVM_CAP_READONLY_MEM 81 +#define KVM_CAP_IRQFD_RESAMPLE 82 +#define KVM_CAP_PPC_BOOKE_WATCHDOG 83 +#define KVM_CAP_PPC_HTAB_FD 84 +#define KVM_CAP_S390_CSS_SUPPORT 85 +#define KVM_CAP_PPC_EPR 86 +#define KVM_CAP_ARM_PSCI 87 +#define KVM_CAP_ARM_SET_DEVICE_ADDR 88 +#define KVM_CAP_DEVICE_CTRL 89 +#define KVM_CAP_IRQ_MPIC 90 +#define KVM_CAP_PPC_RTAS 91 +#define KVM_CAP_IRQ_XICS 92 +#define KVM_CAP_ARM_EL1_32BIT 93 +#define KVM_CAP_SPAPR_MULTITCE 94 +#define KVM_CAP_EXT_EMUL_CPUID 95 +#define KVM_CAP_HYPERV_TIME 96 +#define KVM_CAP_IOAPIC_POLARITY_IGNORED 97 +#define KVM_CAP_ENABLE_CAP_VM 98 +#define KVM_CAP_S390_IRQCHIP 99 +#define KVM_CAP_IOEVENTFD_NO_LENGTH 100 +#define KVM_CAP_VM_ATTRIBUTES 101 +#define KVM_CAP_ARM_PSCI_0_2 102 +#define KVM_CAP_PPC_FIXUP_HCALL 103 +#define KVM_CAP_PPC_ENABLE_HCALL 104 +#define KVM_CAP_CHECK_EXTENSION_VM 105 +#define KVM_CAP_S390_USER_SIGP 106 +#define KVM_CAP_S390_VECTOR_REGISTERS 107 +#define KVM_CAP_S390_MEM_OP 108 +#define KVM_CAP_S390_USER_STSI 109 +#define KVM_CAP_S390_SKEYS 110 +#define KVM_CAP_MIPS_FPU 111 +#define KVM_CAP_MIPS_MSA 112 +#define KVM_CAP_S390_INJECT_IRQ 113 +#define KVM_CAP_S390_IRQ_STATE 114 +#define KVM_CAP_PPC_HWRNG 115 +#define KVM_CAP_DISABLE_QUIRKS 116 +#define KVM_CAP_X86_SMM 117 +#define KVM_CAP_MULTI_ADDRESS_SPACE 118 +#define KVM_CAP_GUEST_DEBUG_HW_BPS 119 +#define KVM_CAP_GUEST_DEBUG_HW_WPS 120 +#define KVM_CAP_SPLIT_IRQCHIP 121 +#define KVM_CAP_IOEVENTFD_ANY_LENGTH 122 +#define KVM_CAP_HYPERV_SYNIC 123 +#define KVM_CAP_S390_RI 124 +#define KVM_CAP_SPAPR_TCE_64 125 +#define KVM_CAP_ARM_PMU_V3 126 +#define KVM_CAP_VCPU_ATTRIBUTES 127 +#define KVM_CAP_MAX_VCPU_ID 128 +#define KVM_CAP_X2APIC_API 129 +#define KVM_CAP_S390_USER_INSTR0 130 +#define KVM_CAP_MSI_DEVID 131 +#define KVM_CAP_PPC_HTM 132 +#define KVM_CAP_SPAPR_RESIZE_HPT 133 +#define KVM_CAP_PPC_MMU_RADIX 134 +#define KVM_CAP_PPC_MMU_HASH_V3 135 +#define KVM_CAP_IMMEDIATE_EXIT 136 +#define KVM_CAP_MIPS_VZ 137 +#define KVM_CAP_MIPS_TE 138 +#define KVM_CAP_MIPS_64BIT 139 +#define KVM_CAP_S390_GS 140 +#define KVM_CAP_S390_AIS 141 +#define KVM_CAP_SPAPR_TCE_VFIO 142 +#define KVM_CAP_X86_DISABLE_EXITS 143 +#define KVM_CAP_ARM_USER_IRQ 144 +#define KVM_CAP_S390_CMMA_MIGRATION 145 +#define KVM_CAP_PPC_FWNMI 146 +#define KVM_CAP_PPC_SMT_POSSIBLE 147 +#define KVM_CAP_HYPERV_SYNIC2 148 +#define KVM_CAP_HYPERV_VP_INDEX 149 +#define KVM_CAP_S390_AIS_MIGRATION 150 +#define KVM_CAP_PPC_GET_CPU_CHAR 151 +#define KVM_CAP_S390_BPB 152 +#define KVM_CAP_GET_MSR_FEATURES 153 +#define KVM_CAP_HYPERV_EVENTFD 154 +#define KVM_CAP_HYPERV_TLBFLUSH 155 +#define KVM_CAP_S390_HPAGE_1M 156 +#define KVM_CAP_NESTED_STATE 157 +#define KVM_CAP_ARM_INJECT_SERROR_ESR 158 +#define KVM_CAP_MSR_PLATFORM_INFO 159 +#define KVM_CAP_PPC_NESTED_HV 160 +#define KVM_CAP_HYPERV_SEND_IPI 161 +#define KVM_CAP_COALESCED_PIO 162 +#define KVM_CAP_HYPERV_ENLIGHTENED_VMCS 163 +#define KVM_CAP_EXCEPTION_PAYLOAD 164 +#define KVM_CAP_ARM_VM_IPA_SIZE 165 +#define KVM_CAP_MANUAL_DIRTY_LOG_PROTECT 166 /* Obsolete */ +#define KVM_CAP_HYPERV_CPUID 167 +#define KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 168 +#define KVM_CAP_PPC_IRQ_XIVE 169 +#define KVM_CAP_ARM_SVE 170 +#define KVM_CAP_ARM_PTRAUTH_ADDRESS 171 +#define KVM_CAP_ARM_PTRAUTH_GENERIC 172 +#define KVM_CAP_PMU_EVENT_FILTER 173 +#define KVM_CAP_ARM_IRQ_LINE_LAYOUT_2 174 +#define KVM_CAP_HYPERV_DIRECT_TLBFLUSH 175 +#define KVM_CAP_PPC_GUEST_DEBUG_SSTEP 176 +#define KVM_CAP_ARM_NISV_TO_USER 177 +#define KVM_CAP_ARM_INJECT_EXT_DABT 178 +#define KVM_CAP_S390_VCPU_RESETS 179 +#define KVM_CAP_S390_PROTECTED 180 +#define KVM_CAP_PPC_SECURE_GUEST 181 +#define KVM_CAP_HALT_POLL 182 +#define KVM_CAP_ASYNC_PF_INT 183 +#define KVM_CAP_LAST_CPU 184 +#define KVM_CAP_SMALLER_MAXPHYADDR 185 +#define KVM_CAP_S390_DIAG318 186 +#define KVM_CAP_STEAL_TIME 187 +#define KVM_CAP_X86_USER_SPACE_MSR 188 +#define KVM_CAP_X86_MSR_FILTER 189 +#define KVM_CAP_ENFORCE_PV_FEATURE_CPUID 190 +#define KVM_CAP_SYS_HYPERV_CPUID 191 +#define KVM_CAP_DIRTY_LOG_RING 192 +#define KVM_CAP_X86_BUS_LOCK_EXIT 193 +#define KVM_CAP_PPC_DAWR1 194 +#define KVM_CAP_SET_GUEST_DEBUG2 195 +#define KVM_CAP_SGX_ATTRIBUTE 196 +#define KVM_CAP_VM_COPY_ENC_CONTEXT_FROM 197 +#define KVM_CAP_PTP_KVM 198 +#define KVM_CAP_HYPERV_ENFORCE_CPUID 199 +#define KVM_CAP_SREGS2 200 +#define KVM_CAP_EXIT_HYPERCALL 201 +#define KVM_CAP_PPC_RPT_INVALIDATE 202 +#define KVM_CAP_BINARY_STATS_FD 203 +#define KVM_CAP_EXIT_ON_EMULATION_FAILURE 204 +#define KVM_CAP_ARM_MTE 205 +#define KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM 206 +#define KVM_CAP_VM_GPA_BITS 207 +#define KVM_CAP_XSAVE2 208 +#define KVM_CAP_SYS_ATTRIBUTES 209 +#define KVM_CAP_PPC_AIL_MODE_3 210 +#define KVM_CAP_S390_MEM_OP_EXTENSION 211 +#define KVM_CAP_PMU_CAPABILITY 212 +#define KVM_CAP_DISABLE_QUIRKS2 213 +#define KVM_CAP_VM_TSC_CONTROL 214 +#define KVM_CAP_SYSTEM_EVENT_DATA 215 +#define KVM_CAP_ARM_SYSTEM_SUSPEND 216 +#define KVM_CAP_S390_PROTECTED_DUMP 217 +#define KVM_CAP_X86_TRIPLE_FAULT_EVENT 218 +#define KVM_CAP_X86_NOTIFY_VMEXIT 219 +#define KVM_CAP_VM_DISABLE_NX_HUGE_PAGES 220 +#define KVM_CAP_S390_ZPCI_OP 221 +#define KVM_CAP_S390_CPU_TOPOLOGY 222 +#define KVM_CAP_DIRTY_LOG_RING_ACQ_REL 223 +#define KVM_CAP_S390_PROTECTED_ASYNC_DISABLE 224 +#define KVM_CAP_DIRTY_LOG_RING_WITH_BITMAP 225 +#define KVM_CAP_PMU_EVENT_MASKED_EVENTS 226 +#define KVM_CAP_COUNTER_OFFSET 227 +#define KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE 228 +#define KVM_CAP_ARM_SUPPORTED_BLOCK_SIZES 229 + +#ifdef KVM_CAP_IRQ_ROUTING + +struct kvm_irq_routing_irqchip { + __u32 irqchip; + __u32 pin; +}; + +struct kvm_irq_routing_msi { + __u32 address_lo; + __u32 address_hi; + __u32 data; + union { + __u32 pad; + __u32 devid; + }; +}; + +struct kvm_irq_routing_s390_adapter { + __u64 ind_addr; + __u64 summary_addr; + __u64 ind_offset; + __u32 summary_offset; + __u32 adapter_id; +}; + +struct kvm_irq_routing_hv_sint { + __u32 vcpu; + __u32 sint; +}; + +struct kvm_irq_routing_xen_evtchn { + __u32 port; + __u32 vcpu; + __u32 priority; +}; + +#define KVM_IRQ_ROUTING_XEN_EVTCHN_PRIO_2LEVEL ((__u32)(-1)) + +/* gsi routing entry types */ +#define KVM_IRQ_ROUTING_IRQCHIP 1 +#define KVM_IRQ_ROUTING_MSI 2 +#define KVM_IRQ_ROUTING_S390_ADAPTER 3 +#define KVM_IRQ_ROUTING_HV_SINT 4 +#define KVM_IRQ_ROUTING_XEN_EVTCHN 5 + +struct kvm_irq_routing_entry { + __u32 gsi; + __u32 type; + __u32 flags; + __u32 pad; + union { + struct kvm_irq_routing_irqchip irqchip; + struct kvm_irq_routing_msi msi; + struct kvm_irq_routing_s390_adapter adapter; + struct kvm_irq_routing_hv_sint hv_sint; + struct kvm_irq_routing_xen_evtchn xen_evtchn; + __u32 pad[8]; + } u; +}; + +struct kvm_irq_routing { + __u32 nr; + __u32 flags; + struct kvm_irq_routing_entry entries[]; +}; + +#endif + +#ifdef KVM_CAP_MCE +/* x86 MCE */ +struct kvm_x86_mce { + __u64 status; + __u64 addr; + __u64 misc; + __u64 mcg_status; + __u8 bank; + __u8 pad1[7]; + __u64 pad2[3]; +}; +#endif + +#ifdef KVM_CAP_XEN_HVM +#define KVM_XEN_HVM_CONFIG_HYPERCALL_MSR (1 << 0) +#define KVM_XEN_HVM_CONFIG_INTERCEPT_HCALL (1 << 1) +#define KVM_XEN_HVM_CONFIG_SHARED_INFO (1 << 2) +#define KVM_XEN_HVM_CONFIG_RUNSTATE (1 << 3) +#define KVM_XEN_HVM_CONFIG_EVTCHN_2LEVEL (1 << 4) +#define KVM_XEN_HVM_CONFIG_EVTCHN_SEND (1 << 5) +#define KVM_XEN_HVM_CONFIG_RUNSTATE_UPDATE_FLAG (1 << 6) + +struct kvm_xen_hvm_config { + __u32 flags; + __u32 msr; + __u64 blob_addr_32; + __u64 blob_addr_64; + __u8 blob_size_32; + __u8 blob_size_64; + __u8 pad2[30]; +}; +#endif + +#define KVM_IRQFD_FLAG_DEASSIGN (1 << 0) +/* + * Available with KVM_CAP_IRQFD_RESAMPLE + * + * KVM_IRQFD_FLAG_RESAMPLE indicates resamplefd is valid and specifies + * the irqfd to operate in resampling mode for level triggered interrupt + * emulation. See Documentation/virt/kvm/api.rst. + */ +#define KVM_IRQFD_FLAG_RESAMPLE (1 << 1) + +struct kvm_irqfd { + __u32 fd; + __u32 gsi; + __u32 flags; + __u32 resamplefd; + __u8 pad[16]; +}; + +/* For KVM_CAP_ADJUST_CLOCK */ + +/* Do not use 1, KVM_CHECK_EXTENSION returned it before we had flags. */ +#define KVM_CLOCK_TSC_STABLE 2 +#define KVM_CLOCK_REALTIME (1 << 2) +#define KVM_CLOCK_HOST_TSC (1 << 3) + +struct kvm_clock_data { + __u64 clock; + __u32 flags; + __u32 pad0; + __u64 realtime; + __u64 host_tsc; + __u32 pad[4]; +}; + +/* For KVM_CAP_SW_TLB */ + +#define KVM_MMU_FSL_BOOKE_NOHV 0 +#define KVM_MMU_FSL_BOOKE_HV 1 + +struct kvm_config_tlb { + __u64 params; + __u64 array; + __u32 mmu_type; + __u32 array_len; +}; + +struct kvm_dirty_tlb { + __u64 bitmap; + __u32 num_dirty; +}; + +/* Available with KVM_CAP_ONE_REG */ + +#define KVM_REG_ARCH_MASK 0xff00000000000000ULL +#define KVM_REG_GENERIC 0x0000000000000000ULL + +/* + * Architecture specific registers are to be defined in arch headers and + * ORed with the arch identifier. + */ +#define KVM_REG_PPC 0x1000000000000000ULL +#define KVM_REG_X86 0x2000000000000000ULL +#define KVM_REG_IA64 0x3000000000000000ULL +#define KVM_REG_ARM 0x4000000000000000ULL +#define KVM_REG_S390 0x5000000000000000ULL +#define KVM_REG_ARM64 0x6000000000000000ULL +#define KVM_REG_MIPS 0x7000000000000000ULL +#define KVM_REG_RISCV 0x8000000000000000ULL + +#define KVM_REG_SIZE_SHIFT 52 +#define KVM_REG_SIZE_MASK 0x00f0000000000000ULL +#define KVM_REG_SIZE_U8 0x0000000000000000ULL +#define KVM_REG_SIZE_U16 0x0010000000000000ULL +#define KVM_REG_SIZE_U32 0x0020000000000000ULL +#define KVM_REG_SIZE_U64 0x0030000000000000ULL +#define KVM_REG_SIZE_U128 0x0040000000000000ULL +#define KVM_REG_SIZE_U256 0x0050000000000000ULL +#define KVM_REG_SIZE_U512 0x0060000000000000ULL +#define KVM_REG_SIZE_U1024 0x0070000000000000ULL +#define KVM_REG_SIZE_U2048 0x0080000000000000ULL + +struct kvm_reg_list { + __u64 n; /* number of regs */ + __u64 reg[]; +}; + +struct kvm_one_reg { + __u64 id; + __u64 addr; +}; + +#define KVM_MSI_VALID_DEVID (1U << 0) +struct kvm_msi { + __u32 address_lo; + __u32 address_hi; + __u32 data; + __u32 flags; + __u32 devid; + __u8 pad[12]; +}; + +struct kvm_arm_device_addr { + __u64 id; + __u64 addr; +}; + +/* + * Device control API, available with KVM_CAP_DEVICE_CTRL + */ +#define KVM_CREATE_DEVICE_TEST 1 + +struct kvm_create_device { + __u32 type; /* in: KVM_DEV_TYPE_xxx */ + __u32 fd; /* out: device handle */ + __u32 flags; /* in: KVM_CREATE_DEVICE_xxx */ +}; + +struct kvm_device_attr { + __u32 flags; /* no flags currently defined */ + __u32 group; /* device-defined */ + __u64 attr; /* group-defined */ + __u64 addr; /* userspace address of attr data */ +}; + +#define KVM_DEV_VFIO_FILE 1 + +#define KVM_DEV_VFIO_FILE_ADD 1 +#define KVM_DEV_VFIO_FILE_DEL 2 + +/* KVM_DEV_VFIO_GROUP aliases are for compile time uapi compatibility */ +#define KVM_DEV_VFIO_GROUP KVM_DEV_VFIO_FILE + +#define KVM_DEV_VFIO_GROUP_ADD KVM_DEV_VFIO_FILE_ADD +#define KVM_DEV_VFIO_GROUP_DEL KVM_DEV_VFIO_FILE_DEL +#define KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE 3 + +enum kvm_device_type { + KVM_DEV_TYPE_FSL_MPIC_20 = 1, +#define KVM_DEV_TYPE_FSL_MPIC_20 KVM_DEV_TYPE_FSL_MPIC_20 + KVM_DEV_TYPE_FSL_MPIC_42, +#define KVM_DEV_TYPE_FSL_MPIC_42 KVM_DEV_TYPE_FSL_MPIC_42 + KVM_DEV_TYPE_XICS, +#define KVM_DEV_TYPE_XICS KVM_DEV_TYPE_XICS + KVM_DEV_TYPE_VFIO, +#define KVM_DEV_TYPE_VFIO KVM_DEV_TYPE_VFIO + KVM_DEV_TYPE_ARM_VGIC_V2, +#define KVM_DEV_TYPE_ARM_VGIC_V2 KVM_DEV_TYPE_ARM_VGIC_V2 + KVM_DEV_TYPE_FLIC, +#define KVM_DEV_TYPE_FLIC KVM_DEV_TYPE_FLIC + KVM_DEV_TYPE_ARM_VGIC_V3, +#define KVM_DEV_TYPE_ARM_VGIC_V3 KVM_DEV_TYPE_ARM_VGIC_V3 + KVM_DEV_TYPE_ARM_VGIC_ITS, +#define KVM_DEV_TYPE_ARM_VGIC_ITS KVM_DEV_TYPE_ARM_VGIC_ITS + KVM_DEV_TYPE_XIVE, +#define KVM_DEV_TYPE_XIVE KVM_DEV_TYPE_XIVE + KVM_DEV_TYPE_ARM_PV_TIME, +#define KVM_DEV_TYPE_ARM_PV_TIME KVM_DEV_TYPE_ARM_PV_TIME + KVM_DEV_TYPE_RISCV_AIA, +#define KVM_DEV_TYPE_RISCV_AIA KVM_DEV_TYPE_RISCV_AIA + KVM_DEV_TYPE_MAX, +}; + +struct kvm_vfio_spapr_tce { + __s32 groupfd; + __s32 tablefd; +}; + +/* + * KVM_CREATE_VCPU receives as a parameter the vcpu slot, and returns + * a vcpu fd. + */ +#define KVM_CREATE_VCPU _IO(KVMIO, 0x41) +#define KVM_GET_DIRTY_LOG _IOW(KVMIO, 0x42, struct kvm_dirty_log) +#define KVM_SET_NR_MMU_PAGES _IO(KVMIO, 0x44) +#define KVM_GET_NR_MMU_PAGES _IO(KVMIO, 0x45) /* deprecated */ +#define KVM_SET_USER_MEMORY_REGION _IOW(KVMIO, 0x46, \ + struct kvm_userspace_memory_region) +#define KVM_SET_TSS_ADDR _IO(KVMIO, 0x47) +#define KVM_SET_IDENTITY_MAP_ADDR _IOW(KVMIO, 0x48, __u64) + +/* enable ucontrol for s390 */ +struct kvm_s390_ucas_mapping { + __u64 user_addr; + __u64 vcpu_addr; + __u64 length; +}; +#define KVM_S390_UCAS_MAP _IOW(KVMIO, 0x50, struct kvm_s390_ucas_mapping) +#define KVM_S390_UCAS_UNMAP _IOW(KVMIO, 0x51, struct kvm_s390_ucas_mapping) +#define KVM_S390_VCPU_FAULT _IOW(KVMIO, 0x52, unsigned long) + +/* Device model IOC */ +#define KVM_CREATE_IRQCHIP _IO(KVMIO, 0x60) +#define KVM_IRQ_LINE _IOW(KVMIO, 0x61, struct kvm_irq_level) +#define KVM_GET_IRQCHIP _IOWR(KVMIO, 0x62, struct kvm_irqchip) +#define KVM_SET_IRQCHIP _IOR(KVMIO, 0x63, struct kvm_irqchip) +#define KVM_CREATE_PIT _IO(KVMIO, 0x64) +#define KVM_GET_PIT _IOWR(KVMIO, 0x65, struct kvm_pit_state) +#define KVM_SET_PIT _IOR(KVMIO, 0x66, struct kvm_pit_state) +#define KVM_IRQ_LINE_STATUS _IOWR(KVMIO, 0x67, struct kvm_irq_level) +#define KVM_REGISTER_COALESCED_MMIO \ + _IOW(KVMIO, 0x67, struct kvm_coalesced_mmio_zone) +#define KVM_UNREGISTER_COALESCED_MMIO \ + _IOW(KVMIO, 0x68, struct kvm_coalesced_mmio_zone) +#define KVM_ASSIGN_PCI_DEVICE _IOR(KVMIO, 0x69, \ + struct kvm_assigned_pci_dev) +#define KVM_SET_GSI_ROUTING _IOW(KVMIO, 0x6a, struct kvm_irq_routing) +/* deprecated, replaced by KVM_ASSIGN_DEV_IRQ */ +#define KVM_ASSIGN_IRQ __KVM_DEPRECATED_VM_R_0x70 +#define KVM_ASSIGN_DEV_IRQ _IOW(KVMIO, 0x70, struct kvm_assigned_irq) +#define KVM_REINJECT_CONTROL _IO(KVMIO, 0x71) +#define KVM_DEASSIGN_PCI_DEVICE _IOW(KVMIO, 0x72, \ + struct kvm_assigned_pci_dev) +#define KVM_ASSIGN_SET_MSIX_NR _IOW(KVMIO, 0x73, \ + struct kvm_assigned_msix_nr) +#define KVM_ASSIGN_SET_MSIX_ENTRY _IOW(KVMIO, 0x74, \ + struct kvm_assigned_msix_entry) +#define KVM_DEASSIGN_DEV_IRQ _IOW(KVMIO, 0x75, struct kvm_assigned_irq) +#define KVM_IRQFD _IOW(KVMIO, 0x76, struct kvm_irqfd) +#define KVM_CREATE_PIT2 _IOW(KVMIO, 0x77, struct kvm_pit_config) +#define KVM_SET_BOOT_CPU_ID _IO(KVMIO, 0x78) +#define KVM_IOEVENTFD _IOW(KVMIO, 0x79, struct kvm_ioeventfd) +#define KVM_XEN_HVM_CONFIG _IOW(KVMIO, 0x7a, struct kvm_xen_hvm_config) +#define KVM_SET_CLOCK _IOW(KVMIO, 0x7b, struct kvm_clock_data) +#define KVM_GET_CLOCK _IOR(KVMIO, 0x7c, struct kvm_clock_data) +/* Available with KVM_CAP_PIT_STATE2 */ +#define KVM_GET_PIT2 _IOR(KVMIO, 0x9f, struct kvm_pit_state2) +#define KVM_SET_PIT2 _IOW(KVMIO, 0xa0, struct kvm_pit_state2) +/* Available with KVM_CAP_PPC_GET_PVINFO */ +#define KVM_PPC_GET_PVINFO _IOW(KVMIO, 0xa1, struct kvm_ppc_pvinfo) +/* Available with KVM_CAP_TSC_CONTROL for a vCPU, or with +* KVM_CAP_VM_TSC_CONTROL to set defaults for a VM */ +#define KVM_SET_TSC_KHZ _IO(KVMIO, 0xa2) +#define KVM_GET_TSC_KHZ _IO(KVMIO, 0xa3) +/* Available with KVM_CAP_PCI_2_3 */ +#define KVM_ASSIGN_SET_INTX_MASK _IOW(KVMIO, 0xa4, \ + struct kvm_assigned_pci_dev) +/* Available with KVM_CAP_SIGNAL_MSI */ +#define KVM_SIGNAL_MSI _IOW(KVMIO, 0xa5, struct kvm_msi) +/* Available with KVM_CAP_PPC_GET_SMMU_INFO */ +#define KVM_PPC_GET_SMMU_INFO _IOR(KVMIO, 0xa6, struct kvm_ppc_smmu_info) +/* Available with KVM_CAP_PPC_ALLOC_HTAB */ +#define KVM_PPC_ALLOCATE_HTAB _IOWR(KVMIO, 0xa7, __u32) +#define KVM_CREATE_SPAPR_TCE _IOW(KVMIO, 0xa8, struct kvm_create_spapr_tce) +#define KVM_CREATE_SPAPR_TCE_64 _IOW(KVMIO, 0xa8, \ + struct kvm_create_spapr_tce_64) +/* Available with KVM_CAP_RMA */ +#define KVM_ALLOCATE_RMA _IOR(KVMIO, 0xa9, struct kvm_allocate_rma) +/* Available with KVM_CAP_PPC_HTAB_FD */ +#define KVM_PPC_GET_HTAB_FD _IOW(KVMIO, 0xaa, struct kvm_get_htab_fd) +/* Available with KVM_CAP_ARM_SET_DEVICE_ADDR */ +#define KVM_ARM_SET_DEVICE_ADDR _IOW(KVMIO, 0xab, struct kvm_arm_device_addr) +/* Available with KVM_CAP_PPC_RTAS */ +#define KVM_PPC_RTAS_DEFINE_TOKEN _IOW(KVMIO, 0xac, struct kvm_rtas_token_args) +/* Available with KVM_CAP_SPAPR_RESIZE_HPT */ +#define KVM_PPC_RESIZE_HPT_PREPARE _IOR(KVMIO, 0xad, struct kvm_ppc_resize_hpt) +#define KVM_PPC_RESIZE_HPT_COMMIT _IOR(KVMIO, 0xae, struct kvm_ppc_resize_hpt) +/* Available with KVM_CAP_PPC_RADIX_MMU or KVM_CAP_PPC_HASH_MMU_V3 */ +#define KVM_PPC_CONFIGURE_V3_MMU _IOW(KVMIO, 0xaf, struct kvm_ppc_mmuv3_cfg) +/* Available with KVM_CAP_PPC_RADIX_MMU */ +#define KVM_PPC_GET_RMMU_INFO _IOW(KVMIO, 0xb0, struct kvm_ppc_rmmu_info) +/* Available with KVM_CAP_PPC_GET_CPU_CHAR */ +#define KVM_PPC_GET_CPU_CHAR _IOR(KVMIO, 0xb1, struct kvm_ppc_cpu_char) +/* Available with KVM_CAP_PMU_EVENT_FILTER */ +#define KVM_SET_PMU_EVENT_FILTER _IOW(KVMIO, 0xb2, struct kvm_pmu_event_filter) +#define KVM_PPC_SVM_OFF _IO(KVMIO, 0xb3) +#define KVM_ARM_MTE_COPY_TAGS _IOR(KVMIO, 0xb4, struct kvm_arm_copy_mte_tags) +/* Available with KVM_CAP_COUNTER_OFFSET */ +#define KVM_ARM_SET_COUNTER_OFFSET _IOW(KVMIO, 0xb5, struct kvm_arm_counter_offset) + +/* ioctl for vm fd */ +#define KVM_CREATE_DEVICE _IOWR(KVMIO, 0xe0, struct kvm_create_device) + +/* ioctls for fds returned by KVM_CREATE_DEVICE */ +#define KVM_SET_DEVICE_ATTR _IOW(KVMIO, 0xe1, struct kvm_device_attr) +#define KVM_GET_DEVICE_ATTR _IOW(KVMIO, 0xe2, struct kvm_device_attr) +#define KVM_HAS_DEVICE_ATTR _IOW(KVMIO, 0xe3, struct kvm_device_attr) + +/* + * ioctls for vcpu fds + */ +#define KVM_RUN _IO(KVMIO, 0x80) +#define KVM_GET_REGS _IOR(KVMIO, 0x81, struct kvm_regs) +#define KVM_SET_REGS _IOW(KVMIO, 0x82, struct kvm_regs) +#define KVM_GET_SREGS _IOR(KVMIO, 0x83, struct kvm_sregs) +#define KVM_SET_SREGS _IOW(KVMIO, 0x84, struct kvm_sregs) +#define KVM_TRANSLATE _IOWR(KVMIO, 0x85, struct kvm_translation) +#define KVM_INTERRUPT _IOW(KVMIO, 0x86, struct kvm_interrupt) +/* KVM_DEBUG_GUEST is no longer supported, use KVM_SET_GUEST_DEBUG instead */ +#define KVM_DEBUG_GUEST __KVM_DEPRECATED_VCPU_W_0x87 +#define KVM_GET_MSRS _IOWR(KVMIO, 0x88, struct kvm_msrs) +#define KVM_SET_MSRS _IOW(KVMIO, 0x89, struct kvm_msrs) +#define KVM_SET_CPUID _IOW(KVMIO, 0x8a, struct kvm_cpuid) +#define KVM_SET_SIGNAL_MASK _IOW(KVMIO, 0x8b, struct kvm_signal_mask) +#define KVM_GET_FPU _IOR(KVMIO, 0x8c, struct kvm_fpu) +#define KVM_SET_FPU _IOW(KVMIO, 0x8d, struct kvm_fpu) +#define KVM_GET_LAPIC _IOR(KVMIO, 0x8e, struct kvm_lapic_state) +#define KVM_SET_LAPIC _IOW(KVMIO, 0x8f, struct kvm_lapic_state) +#define KVM_SET_CPUID2 _IOW(KVMIO, 0x90, struct kvm_cpuid2) +#define KVM_GET_CPUID2 _IOWR(KVMIO, 0x91, struct kvm_cpuid2) +/* Available with KVM_CAP_VAPIC */ +#define KVM_TPR_ACCESS_REPORTING _IOWR(KVMIO, 0x92, struct kvm_tpr_access_ctl) +/* Available with KVM_CAP_VAPIC */ +#define KVM_SET_VAPIC_ADDR _IOW(KVMIO, 0x93, struct kvm_vapic_addr) +/* valid for virtual machine (for floating interrupt)_and_ vcpu */ +#define KVM_S390_INTERRUPT _IOW(KVMIO, 0x94, struct kvm_s390_interrupt) +/* store status for s390 */ +#define KVM_S390_STORE_STATUS_NOADDR (-1ul) +#define KVM_S390_STORE_STATUS_PREFIXED (-2ul) +#define KVM_S390_STORE_STATUS _IOW(KVMIO, 0x95, unsigned long) +/* initial ipl psw for s390 */ +#define KVM_S390_SET_INITIAL_PSW _IOW(KVMIO, 0x96, struct kvm_s390_psw) +/* initial reset for s390 */ +#define KVM_S390_INITIAL_RESET _IO(KVMIO, 0x97) +#define KVM_GET_MP_STATE _IOR(KVMIO, 0x98, struct kvm_mp_state) +#define KVM_SET_MP_STATE _IOW(KVMIO, 0x99, struct kvm_mp_state) +/* Available with KVM_CAP_USER_NMI */ +#define KVM_NMI _IO(KVMIO, 0x9a) +/* Available with KVM_CAP_SET_GUEST_DEBUG */ +#define KVM_SET_GUEST_DEBUG _IOW(KVMIO, 0x9b, struct kvm_guest_debug) +/* MCE for x86 */ +#define KVM_X86_SETUP_MCE _IOW(KVMIO, 0x9c, __u64) +#define KVM_X86_GET_MCE_CAP_SUPPORTED _IOR(KVMIO, 0x9d, __u64) +#define KVM_X86_SET_MCE _IOW(KVMIO, 0x9e, struct kvm_x86_mce) +/* Available with KVM_CAP_VCPU_EVENTS */ +#define KVM_GET_VCPU_EVENTS _IOR(KVMIO, 0x9f, struct kvm_vcpu_events) +#define KVM_SET_VCPU_EVENTS _IOW(KVMIO, 0xa0, struct kvm_vcpu_events) +/* Available with KVM_CAP_DEBUGREGS */ +#define KVM_GET_DEBUGREGS _IOR(KVMIO, 0xa1, struct kvm_debugregs) +#define KVM_SET_DEBUGREGS _IOW(KVMIO, 0xa2, struct kvm_debugregs) +/* + * vcpu version available with KVM_CAP_ENABLE_CAP + * vm version available with KVM_CAP_ENABLE_CAP_VM + */ +#define KVM_ENABLE_CAP _IOW(KVMIO, 0xa3, struct kvm_enable_cap) +/* Available with KVM_CAP_XSAVE */ +#define KVM_GET_XSAVE _IOR(KVMIO, 0xa4, struct kvm_xsave) +#define KVM_SET_XSAVE _IOW(KVMIO, 0xa5, struct kvm_xsave) +/* Available with KVM_CAP_XCRS */ +#define KVM_GET_XCRS _IOR(KVMIO, 0xa6, struct kvm_xcrs) +#define KVM_SET_XCRS _IOW(KVMIO, 0xa7, struct kvm_xcrs) +/* Available with KVM_CAP_SW_TLB */ +#define KVM_DIRTY_TLB _IOW(KVMIO, 0xaa, struct kvm_dirty_tlb) +/* Available with KVM_CAP_ONE_REG */ +#define KVM_GET_ONE_REG _IOW(KVMIO, 0xab, struct kvm_one_reg) +#define KVM_SET_ONE_REG _IOW(KVMIO, 0xac, struct kvm_one_reg) +/* VM is being stopped by host */ +#define KVM_KVMCLOCK_CTRL _IO(KVMIO, 0xad) +#define KVM_ARM_VCPU_INIT _IOW(KVMIO, 0xae, struct kvm_vcpu_init) +#define KVM_ARM_PREFERRED_TARGET _IOR(KVMIO, 0xaf, struct kvm_vcpu_init) +#define KVM_GET_REG_LIST _IOWR(KVMIO, 0xb0, struct kvm_reg_list) +/* Available with KVM_CAP_S390_MEM_OP */ +#define KVM_S390_MEM_OP _IOW(KVMIO, 0xb1, struct kvm_s390_mem_op) +/* Available with KVM_CAP_S390_SKEYS */ +#define KVM_S390_GET_SKEYS _IOW(KVMIO, 0xb2, struct kvm_s390_skeys) +#define KVM_S390_SET_SKEYS _IOW(KVMIO, 0xb3, struct kvm_s390_skeys) +/* Available with KVM_CAP_S390_INJECT_IRQ */ +#define KVM_S390_IRQ _IOW(KVMIO, 0xb4, struct kvm_s390_irq) +/* Available with KVM_CAP_S390_IRQ_STATE */ +#define KVM_S390_SET_IRQ_STATE _IOW(KVMIO, 0xb5, struct kvm_s390_irq_state) +#define KVM_S390_GET_IRQ_STATE _IOW(KVMIO, 0xb6, struct kvm_s390_irq_state) +/* Available with KVM_CAP_X86_SMM */ +#define KVM_SMI _IO(KVMIO, 0xb7) +/* Available with KVM_CAP_S390_CMMA_MIGRATION */ +#define KVM_S390_GET_CMMA_BITS _IOWR(KVMIO, 0xb8, struct kvm_s390_cmma_log) +#define KVM_S390_SET_CMMA_BITS _IOW(KVMIO, 0xb9, struct kvm_s390_cmma_log) +/* Memory Encryption Commands */ +#define KVM_MEMORY_ENCRYPT_OP _IOWR(KVMIO, 0xba, unsigned long) + +struct kvm_enc_region { + __u64 addr; + __u64 size; +}; + +#define KVM_MEMORY_ENCRYPT_REG_REGION _IOR(KVMIO, 0xbb, struct kvm_enc_region) +#define KVM_MEMORY_ENCRYPT_UNREG_REGION _IOR(KVMIO, 0xbc, struct kvm_enc_region) + +/* Available with KVM_CAP_HYPERV_EVENTFD */ +#define KVM_HYPERV_EVENTFD _IOW(KVMIO, 0xbd, struct kvm_hyperv_eventfd) + +/* Available with KVM_CAP_NESTED_STATE */ +#define KVM_GET_NESTED_STATE _IOWR(KVMIO, 0xbe, struct kvm_nested_state) +#define KVM_SET_NESTED_STATE _IOW(KVMIO, 0xbf, struct kvm_nested_state) + +/* Available with KVM_CAP_MANUAL_DIRTY_LOG_PROTECT_2 */ +#define KVM_CLEAR_DIRTY_LOG _IOWR(KVMIO, 0xc0, struct kvm_clear_dirty_log) + +/* Available with KVM_CAP_HYPERV_CPUID (vcpu) / KVM_CAP_SYS_HYPERV_CPUID (system) */ +#define KVM_GET_SUPPORTED_HV_CPUID _IOWR(KVMIO, 0xc1, struct kvm_cpuid2) + +/* Available with KVM_CAP_ARM_SVE */ +#define KVM_ARM_VCPU_FINALIZE _IOW(KVMIO, 0xc2, int) + +/* Available with KVM_CAP_S390_VCPU_RESETS */ +#define KVM_S390_NORMAL_RESET _IO(KVMIO, 0xc3) +#define KVM_S390_CLEAR_RESET _IO(KVMIO, 0xc4) + +struct kvm_s390_pv_sec_parm { + __u64 origin; + __u64 length; +}; + +struct kvm_s390_pv_unp { + __u64 addr; + __u64 size; + __u64 tweak; +}; + +enum pv_cmd_dmp_id { + KVM_PV_DUMP_INIT, + KVM_PV_DUMP_CONFIG_STOR_STATE, + KVM_PV_DUMP_COMPLETE, + KVM_PV_DUMP_CPU, +}; + +struct kvm_s390_pv_dmp { + __u64 subcmd; + __u64 buff_addr; + __u64 buff_len; + __u64 gaddr; /* For dump storage state */ + __u64 reserved[4]; +}; + +enum pv_cmd_info_id { + KVM_PV_INFO_VM, + KVM_PV_INFO_DUMP, +}; + +struct kvm_s390_pv_info_dump { + __u64 dump_cpu_buffer_len; + __u64 dump_config_mem_buffer_per_1m; + __u64 dump_config_finalize_len; +}; + +struct kvm_s390_pv_info_vm { + __u64 inst_calls_list[4]; + __u64 max_cpus; + __u64 max_guests; + __u64 max_guest_addr; + __u64 feature_indication; +}; + +struct kvm_s390_pv_info_header { + __u32 id; + __u32 len_max; + __u32 len_written; + __u32 reserved; +}; + +struct kvm_s390_pv_info { + struct kvm_s390_pv_info_header header; + union { + struct kvm_s390_pv_info_dump dump; + struct kvm_s390_pv_info_vm vm; + }; +}; + +enum pv_cmd_id { + KVM_PV_ENABLE, + KVM_PV_DISABLE, + KVM_PV_SET_SEC_PARMS, + KVM_PV_UNPACK, + KVM_PV_VERIFY, + KVM_PV_PREP_RESET, + KVM_PV_UNSHARE_ALL, + KVM_PV_INFO, + KVM_PV_DUMP, + KVM_PV_ASYNC_CLEANUP_PREPARE, + KVM_PV_ASYNC_CLEANUP_PERFORM, +}; + +struct kvm_pv_cmd { + __u32 cmd; /* Command to be executed */ + __u16 rc; /* Ultravisor return code */ + __u16 rrc; /* Ultravisor return reason code */ + __u64 data; /* Data or address */ + __u32 flags; /* flags for future extensions. Must be 0 for now */ + __u32 reserved[3]; +}; + +/* Available with KVM_CAP_S390_PROTECTED */ +#define KVM_S390_PV_COMMAND _IOWR(KVMIO, 0xc5, struct kvm_pv_cmd) + +/* Available with KVM_CAP_X86_MSR_FILTER */ +#define KVM_X86_SET_MSR_FILTER _IOW(KVMIO, 0xc6, struct kvm_msr_filter) + +/* Available with KVM_CAP_DIRTY_LOG_RING */ +#define KVM_RESET_DIRTY_RINGS _IO(KVMIO, 0xc7) + +/* Per-VM Xen attributes */ +#define KVM_XEN_HVM_GET_ATTR _IOWR(KVMIO, 0xc8, struct kvm_xen_hvm_attr) +#define KVM_XEN_HVM_SET_ATTR _IOW(KVMIO, 0xc9, struct kvm_xen_hvm_attr) + +struct kvm_xen_hvm_attr { + __u16 type; + __u16 pad[3]; + union { + __u8 long_mode; + __u8 vector; + __u8 runstate_update_flag; + struct { + __u64 gfn; +#define KVM_XEN_INVALID_GFN ((__u64)-1) + } shared_info; + struct { + __u32 send_port; + __u32 type; /* EVTCHNSTAT_ipi / EVTCHNSTAT_interdomain */ + __u32 flags; +#define KVM_XEN_EVTCHN_DEASSIGN (1 << 0) +#define KVM_XEN_EVTCHN_UPDATE (1 << 1) +#define KVM_XEN_EVTCHN_RESET (1 << 2) + /* + * Events sent by the guest are either looped back to + * the guest itself (potentially on a different port#) + * or signalled via an eventfd. + */ + union { + struct { + __u32 port; + __u32 vcpu; + __u32 priority; + } port; + struct { + __u32 port; /* Zero for eventfd */ + __s32 fd; + } eventfd; + __u32 padding[4]; + } deliver; + } evtchn; + __u32 xen_version; + __u64 pad[8]; + } u; +}; + + +/* Available with KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_SHARED_INFO */ +#define KVM_XEN_ATTR_TYPE_LONG_MODE 0x0 +#define KVM_XEN_ATTR_TYPE_SHARED_INFO 0x1 +#define KVM_XEN_ATTR_TYPE_UPCALL_VECTOR 0x2 +/* Available with KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_EVTCHN_SEND */ +#define KVM_XEN_ATTR_TYPE_EVTCHN 0x3 +#define KVM_XEN_ATTR_TYPE_XEN_VERSION 0x4 +/* Available with KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_RUNSTATE_UPDATE_FLAG */ +#define KVM_XEN_ATTR_TYPE_RUNSTATE_UPDATE_FLAG 0x5 + +/* Per-vCPU Xen attributes */ +#define KVM_XEN_VCPU_GET_ATTR _IOWR(KVMIO, 0xca, struct kvm_xen_vcpu_attr) +#define KVM_XEN_VCPU_SET_ATTR _IOW(KVMIO, 0xcb, struct kvm_xen_vcpu_attr) + +/* Available with KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_EVTCHN_SEND */ +#define KVM_XEN_HVM_EVTCHN_SEND _IOW(KVMIO, 0xd0, struct kvm_irq_routing_xen_evtchn) + +#define KVM_GET_SREGS2 _IOR(KVMIO, 0xcc, struct kvm_sregs2) +#define KVM_SET_SREGS2 _IOW(KVMIO, 0xcd, struct kvm_sregs2) + +struct kvm_xen_vcpu_attr { + __u16 type; + __u16 pad[3]; + union { + __u64 gpa; +#define KVM_XEN_INVALID_GPA ((__u64)-1) + __u64 pad[8]; + struct { + __u64 state; + __u64 state_entry_time; + __u64 time_running; + __u64 time_runnable; + __u64 time_blocked; + __u64 time_offline; + } runstate; + __u32 vcpu_id; + struct { + __u32 port; + __u32 priority; + __u64 expires_ns; + } timer; + __u8 vector; + } u; +}; + +/* Available with KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_SHARED_INFO */ +#define KVM_XEN_VCPU_ATTR_TYPE_VCPU_INFO 0x0 +#define KVM_XEN_VCPU_ATTR_TYPE_VCPU_TIME_INFO 0x1 +#define KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADDR 0x2 +#define KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_CURRENT 0x3 +#define KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_DATA 0x4 +#define KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST 0x5 +/* Available with KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_EVTCHN_SEND */ +#define KVM_XEN_VCPU_ATTR_TYPE_VCPU_ID 0x6 +#define KVM_XEN_VCPU_ATTR_TYPE_TIMER 0x7 +#define KVM_XEN_VCPU_ATTR_TYPE_UPCALL_VECTOR 0x8 + +/* Secure Encrypted Virtualization command */ +enum sev_cmd_id { + /* Guest initialization commands */ + KVM_SEV_INIT = 0, + KVM_SEV_ES_INIT, + /* Guest launch commands */ + KVM_SEV_LAUNCH_START, + KVM_SEV_LAUNCH_UPDATE_DATA, + KVM_SEV_LAUNCH_UPDATE_VMSA, + KVM_SEV_LAUNCH_SECRET, + KVM_SEV_LAUNCH_MEASURE, + KVM_SEV_LAUNCH_FINISH, + /* Guest migration commands (outgoing) */ + KVM_SEV_SEND_START, + KVM_SEV_SEND_UPDATE_DATA, + KVM_SEV_SEND_UPDATE_VMSA, + KVM_SEV_SEND_FINISH, + /* Guest migration commands (incoming) */ + KVM_SEV_RECEIVE_START, + KVM_SEV_RECEIVE_UPDATE_DATA, + KVM_SEV_RECEIVE_UPDATE_VMSA, + KVM_SEV_RECEIVE_FINISH, + /* Guest status and debug commands */ + KVM_SEV_GUEST_STATUS, + KVM_SEV_DBG_DECRYPT, + KVM_SEV_DBG_ENCRYPT, + /* Guest certificates commands */ + KVM_SEV_CERT_EXPORT, + /* Attestation report */ + KVM_SEV_GET_ATTESTATION_REPORT, + /* Guest Migration Extension */ + KVM_SEV_SEND_CANCEL, + + KVM_SEV_NR_MAX, +}; + +struct kvm_sev_cmd { + __u32 id; + __u64 data; + __u32 error; + __u32 sev_fd; +}; + +struct kvm_sev_launch_start { + __u32 handle; + __u32 policy; + __u64 dh_uaddr; + __u32 dh_len; + __u64 session_uaddr; + __u32 session_len; +}; + +struct kvm_sev_launch_update_data { + __u64 uaddr; + __u32 len; +}; + + +struct kvm_sev_launch_secret { + __u64 hdr_uaddr; + __u32 hdr_len; + __u64 guest_uaddr; + __u32 guest_len; + __u64 trans_uaddr; + __u32 trans_len; +}; + +struct kvm_sev_launch_measure { + __u64 uaddr; + __u32 len; +}; + +struct kvm_sev_guest_status { + __u32 handle; + __u32 policy; + __u32 state; +}; + +struct kvm_sev_dbg { + __u64 src_uaddr; + __u64 dst_uaddr; + __u32 len; +}; + +struct kvm_sev_attestation_report { + __u8 mnonce[16]; + __u64 uaddr; + __u32 len; +}; + +struct kvm_sev_send_start { + __u32 policy; + __u64 pdh_cert_uaddr; + __u32 pdh_cert_len; + __u64 plat_certs_uaddr; + __u32 plat_certs_len; + __u64 amd_certs_uaddr; + __u32 amd_certs_len; + __u64 session_uaddr; + __u32 session_len; +}; + +struct kvm_sev_send_update_data { + __u64 hdr_uaddr; + __u32 hdr_len; + __u64 guest_uaddr; + __u32 guest_len; + __u64 trans_uaddr; + __u32 trans_len; +}; + +struct kvm_sev_receive_start { + __u32 handle; + __u32 policy; + __u64 pdh_uaddr; + __u32 pdh_len; + __u64 session_uaddr; + __u32 session_len; +}; + +struct kvm_sev_receive_update_data { + __u64 hdr_uaddr; + __u32 hdr_len; + __u64 guest_uaddr; + __u32 guest_len; + __u64 trans_uaddr; + __u32 trans_len; +}; + +#define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0) +#define KVM_DEV_ASSIGN_PCI_2_3 (1 << 1) +#define KVM_DEV_ASSIGN_MASK_INTX (1 << 2) + +struct kvm_assigned_pci_dev { + __u32 assigned_dev_id; + __u32 busnr; + __u32 devfn; + __u32 flags; + __u32 segnr; + union { + __u32 reserved[11]; + }; +}; + +#define KVM_DEV_IRQ_HOST_INTX (1 << 0) +#define KVM_DEV_IRQ_HOST_MSI (1 << 1) +#define KVM_DEV_IRQ_HOST_MSIX (1 << 2) + +#define KVM_DEV_IRQ_GUEST_INTX (1 << 8) +#define KVM_DEV_IRQ_GUEST_MSI (1 << 9) +#define KVM_DEV_IRQ_GUEST_MSIX (1 << 10) + +#define KVM_DEV_IRQ_HOST_MASK 0x00ff +#define KVM_DEV_IRQ_GUEST_MASK 0xff00 + +struct kvm_assigned_irq { + __u32 assigned_dev_id; + __u32 host_irq; /* ignored (legacy field) */ + __u32 guest_irq; + __u32 flags; + union { + __u32 reserved[12]; + }; +}; + +struct kvm_assigned_msix_nr { + __u32 assigned_dev_id; + __u16 entry_nr; + __u16 padding; +}; + +#define KVM_MAX_MSIX_PER_DEV 256 +struct kvm_assigned_msix_entry { + __u32 assigned_dev_id; + __u32 gsi; + __u16 entry; /* The index of entry in the MSI-X table */ + __u16 padding[3]; +}; + +#define KVM_X2APIC_API_USE_32BIT_IDS (1ULL << 0) +#define KVM_X2APIC_API_DISABLE_BROADCAST_QUIRK (1ULL << 1) + +/* Available with KVM_CAP_ARM_USER_IRQ */ + +/* Bits for run->s.regs.device_irq_level */ +#define KVM_ARM_DEV_EL1_VTIMER (1 << 0) +#define KVM_ARM_DEV_EL1_PTIMER (1 << 1) +#define KVM_ARM_DEV_PMU (1 << 2) + +struct kvm_hyperv_eventfd { + __u32 conn_id; + __s32 fd; + __u32 flags; + __u32 padding[3]; +}; + +#define KVM_HYPERV_CONN_ID_MASK 0x00ffffff +#define KVM_HYPERV_EVENTFD_DEASSIGN (1 << 0) + +#define KVM_DIRTY_LOG_MANUAL_PROTECT_ENABLE (1 << 0) +#define KVM_DIRTY_LOG_INITIALLY_SET (1 << 1) + +/* + * Arch needs to define the macro after implementing the dirty ring + * feature. KVM_DIRTY_LOG_PAGE_OFFSET should be defined as the + * starting page offset of the dirty ring structures. + */ +#ifndef KVM_DIRTY_LOG_PAGE_OFFSET +#define KVM_DIRTY_LOG_PAGE_OFFSET 0 +#endif + +/* + * KVM dirty GFN flags, defined as: + * + * |---------------+---------------+--------------| + * | bit 1 (reset) | bit 0 (dirty) | Status | + * |---------------+---------------+--------------| + * | 0 | 0 | Invalid GFN | + * | 0 | 1 | Dirty GFN | + * | 1 | X | GFN to reset | + * |---------------+---------------+--------------| + * + * Lifecycle of a dirty GFN goes like: + * + * dirtied harvested reset + * 00 -----------> 01 -------------> 1X -------+ + * ^ | + * | | + * +------------------------------------------+ + * + * The userspace program is only responsible for the 01->1X state + * conversion after harvesting an entry. Also, it must not skip any + * dirty bits, so that dirty bits are always harvested in sequence. + */ +#define KVM_DIRTY_GFN_F_DIRTY _BITUL(0) +#define KVM_DIRTY_GFN_F_RESET _BITUL(1) +#define KVM_DIRTY_GFN_F_MASK 0x3 + +/* + * KVM dirty rings should be mapped at KVM_DIRTY_LOG_PAGE_OFFSET of + * per-vcpu mmaped regions as an array of struct kvm_dirty_gfn. The + * size of the gfn buffer is decided by the first argument when + * enabling KVM_CAP_DIRTY_LOG_RING. + */ +struct kvm_dirty_gfn { + __u32 flags; + __u32 slot; + __u64 offset; +}; + +#define KVM_BUS_LOCK_DETECTION_OFF (1 << 0) +#define KVM_BUS_LOCK_DETECTION_EXIT (1 << 1) + +#define KVM_PMU_CAP_DISABLE (1 << 0) + +/** + * struct kvm_stats_header - Header of per vm/vcpu binary statistics data. + * @flags: Some extra information for header, always 0 for now. + * @name_size: The size in bytes of the memory which contains statistics + * name string including trailing '\0'. The memory is allocated + * at the send of statistics descriptor. + * @num_desc: The number of statistics the vm or vcpu has. + * @id_offset: The offset of the vm/vcpu stats' id string in the file pointed + * by vm/vcpu stats fd. + * @desc_offset: The offset of the vm/vcpu stats' descriptor block in the file + * pointd by vm/vcpu stats fd. + * @data_offset: The offset of the vm/vcpu stats' data block in the file + * pointed by vm/vcpu stats fd. + * + * This is the header userspace needs to read from stats fd before any other + * readings. It is used by userspace to discover all the information about the + * vm/vcpu's binary statistics. + * Userspace reads this header from the start of the vm/vcpu's stats fd. + */ +struct kvm_stats_header { + __u32 flags; + __u32 name_size; + __u32 num_desc; + __u32 id_offset; + __u32 desc_offset; + __u32 data_offset; +}; + +#define KVM_STATS_TYPE_SHIFT 0 +#define KVM_STATS_TYPE_MASK (0xF << KVM_STATS_TYPE_SHIFT) +#define KVM_STATS_TYPE_CUMULATIVE (0x0 << KVM_STATS_TYPE_SHIFT) +#define KVM_STATS_TYPE_INSTANT (0x1 << KVM_STATS_TYPE_SHIFT) +#define KVM_STATS_TYPE_PEAK (0x2 << KVM_STATS_TYPE_SHIFT) +#define KVM_STATS_TYPE_LINEAR_HIST (0x3 << KVM_STATS_TYPE_SHIFT) +#define KVM_STATS_TYPE_LOG_HIST (0x4 << KVM_STATS_TYPE_SHIFT) +#define KVM_STATS_TYPE_MAX KVM_STATS_TYPE_LOG_HIST + +#define KVM_STATS_UNIT_SHIFT 4 +#define KVM_STATS_UNIT_MASK (0xF << KVM_STATS_UNIT_SHIFT) +#define KVM_STATS_UNIT_NONE (0x0 << KVM_STATS_UNIT_SHIFT) +#define KVM_STATS_UNIT_BYTES (0x1 << KVM_STATS_UNIT_SHIFT) +#define KVM_STATS_UNIT_SECONDS (0x2 << KVM_STATS_UNIT_SHIFT) +#define KVM_STATS_UNIT_CYCLES (0x3 << KVM_STATS_UNIT_SHIFT) +#define KVM_STATS_UNIT_BOOLEAN (0x4 << KVM_STATS_UNIT_SHIFT) +#define KVM_STATS_UNIT_MAX KVM_STATS_UNIT_BOOLEAN + +#define KVM_STATS_BASE_SHIFT 8 +#define KVM_STATS_BASE_MASK (0xF << KVM_STATS_BASE_SHIFT) +#define KVM_STATS_BASE_POW10 (0x0 << KVM_STATS_BASE_SHIFT) +#define KVM_STATS_BASE_POW2 (0x1 << KVM_STATS_BASE_SHIFT) +#define KVM_STATS_BASE_MAX KVM_STATS_BASE_POW2 + +/** + * struct kvm_stats_desc - Descriptor of a KVM statistics. + * @flags: Annotations of the stats, like type, unit, etc. + * @exponent: Used together with @flags to determine the unit. + * @size: The number of data items for this stats. + * Every data item is of type __u64. + * @offset: The offset of the stats to the start of stat structure in + * structure kvm or kvm_vcpu. + * @bucket_size: A parameter value used for histogram stats. It is only used + * for linear histogram stats, specifying the size of the bucket; + * @name: The name string for the stats. Its size is indicated by the + * &kvm_stats_header->name_size. + */ +struct kvm_stats_desc { + __u32 flags; + __s16 exponent; + __u16 size; + __u32 offset; + __u32 bucket_size; + char name[]; +}; + +#define KVM_GET_STATS_FD _IO(KVMIO, 0xce) + +/* Available with KVM_CAP_XSAVE2 */ +#define KVM_GET_XSAVE2 _IOR(KVMIO, 0xcf, struct kvm_xsave) + +/* Available with KVM_CAP_S390_PROTECTED_DUMP */ +#define KVM_S390_PV_CPU_COMMAND _IOWR(KVMIO, 0xd0, struct kvm_pv_cmd) + +/* Available with KVM_CAP_X86_NOTIFY_VMEXIT */ +#define KVM_X86_NOTIFY_VMEXIT_ENABLED (1ULL << 0) +#define KVM_X86_NOTIFY_VMEXIT_USER (1ULL << 1) + +/* Available with KVM_CAP_S390_ZPCI_OP */ +#define KVM_S390_ZPCI_OP _IOW(KVMIO, 0xd1, struct kvm_s390_zpci_op) + +struct kvm_s390_zpci_op { + /* in */ + __u32 fh; /* target device */ + __u8 op; /* operation to perform */ + __u8 pad[3]; + union { + /* for KVM_S390_ZPCIOP_REG_AEN */ + struct { + __u64 ibv; /* Guest addr of interrupt bit vector */ + __u64 sb; /* Guest addr of summary bit */ + __u32 flags; + __u32 noi; /* Number of interrupts */ + __u8 isc; /* Guest interrupt subclass */ + __u8 sbo; /* Offset of guest summary bit vector */ + __u16 pad; + } reg_aen; + __u64 reserved[8]; + } u; +}; + +/* types for kvm_s390_zpci_op->op */ +#define KVM_S390_ZPCIOP_REG_AEN 0 +#define KVM_S390_ZPCIOP_DEREG_AEN 1 + +/* flags for kvm_s390_zpci_op->u.reg_aen.flags */ +#define KVM_S390_ZPCIOP_REGAEN_HOST (1 << 0) + +#endif /* __LINUX_KVM_H */ diff --git a/linux-headers/include/linux/l2tp.h b/linux-headers/include/linux/l2tp.h index 65ec47625f2..e7705e87520 100644 --- a/linux-headers/include/linux/l2tp.h +++ b/linux-headers/include/linux/l2tp.h @@ -13,8 +13,6 @@ #include #include -#define IPPROTO_L2TP 115 - /** * struct sockaddr_l2tpip - the sockaddr structure for L2TP-over-IP sockets * @l2tp_family: address family number AF_L2TPIP. @@ -145,6 +143,7 @@ enum { L2TP_ATTR_RX_ERRORS, /* u64 */ L2TP_ATTR_STATS_PAD, L2TP_ATTR_RX_COOKIE_DISCARDS, /* u64 */ + L2TP_ATTR_RX_INVALID, /* u64 */ __L2TP_ATTR_STATS_MAX, }; diff --git a/linux-headers/include/linux/landlock.h b/linux-headers/include/linux/landlock.h new file mode 100644 index 00000000000..7d83f0d57db --- /dev/null +++ b/linux-headers/include/linux/landlock.h @@ -0,0 +1,192 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Landlock - User space API + * + * Copyright © 2017-2020 Mickaël Salaün + * Copyright © 2018-2020 ANSSI + */ + +#ifndef _LINUX_LANDLOCK_H +#define _LINUX_LANDLOCK_H + +#include + +/** + * struct landlock_ruleset_attr - Ruleset definition + * + * Argument of sys_landlock_create_ruleset(). This structure can grow in + * future versions. + */ +struct landlock_ruleset_attr { + /** + * @handled_access_fs: Bitmask of actions (cf. `Filesystem flags`_) + * that is handled by this ruleset and should then be forbidden if no + * rule explicitly allow them: it is a deny-by-default list that should + * contain as much Landlock access rights as possible. Indeed, all + * Landlock filesystem access rights that are not part of + * handled_access_fs are allowed. This is needed for backward + * compatibility reasons. One exception is the + * %LANDLOCK_ACCESS_FS_REFER access right, which is always implicitly + * handled, but must still be explicitly handled to add new rules with + * this access right. + */ + __u64 handled_access_fs; +}; + +/* + * sys_landlock_create_ruleset() flags: + * + * - %LANDLOCK_CREATE_RULESET_VERSION: Get the highest supported Landlock ABI + * version. + */ +/* clang-format off */ +#define LANDLOCK_CREATE_RULESET_VERSION (1U << 0) +/* clang-format on */ + +/** + * enum landlock_rule_type - Landlock rule type + * + * Argument of sys_landlock_add_rule(). + */ +enum landlock_rule_type { + /** + * @LANDLOCK_RULE_PATH_BENEATH: Type of a &struct + * landlock_path_beneath_attr . + */ + LANDLOCK_RULE_PATH_BENEATH = 1, +}; + +/** + * struct landlock_path_beneath_attr - Path hierarchy definition + * + * Argument of sys_landlock_add_rule(). + */ +struct landlock_path_beneath_attr { + /** + * @allowed_access: Bitmask of allowed actions for this file hierarchy + * (cf. `Filesystem flags`_). + */ + __u64 allowed_access; + /** + * @parent_fd: File descriptor, preferably opened with ``O_PATH``, + * which identifies the parent directory of a file hierarchy, or just a + * file. + */ + __s32 parent_fd; + /* + * This struct is packed to avoid trailing reserved members. + * Cf. security/landlock/syscalls.c:build_check_abi() + */ +} __attribute__((packed)); + +/** + * DOC: fs_access + * + * A set of actions on kernel objects may be defined by an attribute (e.g. + * &struct landlock_path_beneath_attr) including a bitmask of access. + * + * Filesystem flags + * ~~~~~~~~~~~~~~~~ + * + * These flags enable to restrict a sandboxed process to a set of actions on + * files and directories. Files or directories opened before the sandboxing + * are not subject to these restrictions. + * + * A file can only receive these access rights: + * + * - %LANDLOCK_ACCESS_FS_EXECUTE: Execute a file. + * - %LANDLOCK_ACCESS_FS_WRITE_FILE: Open a file with write access. Note that + * you might additionally need the %LANDLOCK_ACCESS_FS_TRUNCATE right in order + * to overwrite files with :manpage:`open(2)` using ``O_TRUNC`` or + * :manpage:`creat(2)`. + * - %LANDLOCK_ACCESS_FS_READ_FILE: Open a file with read access. + * - %LANDLOCK_ACCESS_FS_TRUNCATE: Truncate a file with :manpage:`truncate(2)`, + * :manpage:`ftruncate(2)`, :manpage:`creat(2)`, or :manpage:`open(2)` with + * ``O_TRUNC``. Whether an opened file can be truncated with + * :manpage:`ftruncate(2)` is determined during :manpage:`open(2)`, in the + * same way as read and write permissions are checked during + * :manpage:`open(2)` using %LANDLOCK_ACCESS_FS_READ_FILE and + * %LANDLOCK_ACCESS_FS_WRITE_FILE. This access right is available since the + * third version of the Landlock ABI. + * + * A directory can receive access rights related to files or directories. The + * following access right is applied to the directory itself, and the + * directories beneath it: + * + * - %LANDLOCK_ACCESS_FS_READ_DIR: Open a directory or list its content. + * + * However, the following access rights only apply to the content of a + * directory, not the directory itself: + * + * - %LANDLOCK_ACCESS_FS_REMOVE_DIR: Remove an empty directory or rename one. + * - %LANDLOCK_ACCESS_FS_REMOVE_FILE: Unlink (or rename) a file. + * - %LANDLOCK_ACCESS_FS_MAKE_CHAR: Create (or rename or link) a character + * device. + * - %LANDLOCK_ACCESS_FS_MAKE_DIR: Create (or rename) a directory. + * - %LANDLOCK_ACCESS_FS_MAKE_REG: Create (or rename or link) a regular file. + * - %LANDLOCK_ACCESS_FS_MAKE_SOCK: Create (or rename or link) a UNIX domain + * socket. + * - %LANDLOCK_ACCESS_FS_MAKE_FIFO: Create (or rename or link) a named pipe. + * - %LANDLOCK_ACCESS_FS_MAKE_BLOCK: Create (or rename or link) a block device. + * - %LANDLOCK_ACCESS_FS_MAKE_SYM: Create (or rename or link) a symbolic link. + * - %LANDLOCK_ACCESS_FS_REFER: Link or rename a file from or to a different + * directory (i.e. reparent a file hierarchy). + * + * This access right is available since the second version of the Landlock + * ABI. + * + * This is the only access right which is denied by default by any ruleset, + * even if the right is not specified as handled at ruleset creation time. + * The only way to make a ruleset grant this right is to explicitly allow it + * for a specific directory by adding a matching rule to the ruleset. + * + * In particular, when using the first Landlock ABI version, Landlock will + * always deny attempts to reparent files between different directories. + * + * In addition to the source and destination directories having the + * %LANDLOCK_ACCESS_FS_REFER access right, the attempted link or rename + * operation must meet the following constraints: + * + * * The reparented file may not gain more access rights in the destination + * directory than it previously had in the source directory. If this is + * attempted, the operation results in an ``EXDEV`` error. + * + * * When linking or renaming, the ``LANDLOCK_ACCESS_FS_MAKE_*`` right for the + * respective file type must be granted for the destination directory. + * Otherwise, the operation results in an ``EACCES`` error. + * + * * When renaming, the ``LANDLOCK_ACCESS_FS_REMOVE_*`` right for the + * respective file type must be granted for the source directory. Otherwise, + * the operation results in an ``EACCES`` error. + * + * If multiple requirements are not met, the ``EACCES`` error code takes + * precedence over ``EXDEV``. + * + * .. warning:: + * + * It is currently not possible to restrict some file-related actions + * accessible through these syscall families: :manpage:`chdir(2)`, + * :manpage:`stat(2)`, :manpage:`flock(2)`, :manpage:`chmod(2)`, + * :manpage:`chown(2)`, :manpage:`setxattr(2)`, :manpage:`utime(2)`, + * :manpage:`ioctl(2)`, :manpage:`fcntl(2)`, :manpage:`access(2)`. + * Future Landlock evolutions will enable to restrict them. + */ +/* clang-format off */ +#define LANDLOCK_ACCESS_FS_EXECUTE (1ULL << 0) +#define LANDLOCK_ACCESS_FS_WRITE_FILE (1ULL << 1) +#define LANDLOCK_ACCESS_FS_READ_FILE (1ULL << 2) +#define LANDLOCK_ACCESS_FS_READ_DIR (1ULL << 3) +#define LANDLOCK_ACCESS_FS_REMOVE_DIR (1ULL << 4) +#define LANDLOCK_ACCESS_FS_REMOVE_FILE (1ULL << 5) +#define LANDLOCK_ACCESS_FS_MAKE_CHAR (1ULL << 6) +#define LANDLOCK_ACCESS_FS_MAKE_DIR (1ULL << 7) +#define LANDLOCK_ACCESS_FS_MAKE_REG (1ULL << 8) +#define LANDLOCK_ACCESS_FS_MAKE_SOCK (1ULL << 9) +#define LANDLOCK_ACCESS_FS_MAKE_FIFO (1ULL << 10) +#define LANDLOCK_ACCESS_FS_MAKE_BLOCK (1ULL << 11) +#define LANDLOCK_ACCESS_FS_MAKE_SYM (1ULL << 12) +#define LANDLOCK_ACCESS_FS_REFER (1ULL << 13) +#define LANDLOCK_ACCESS_FS_TRUNCATE (1ULL << 14) +/* clang-format on */ + +#endif /* _LINUX_LANDLOCK_H */ diff --git a/linux-headers/include/linux/lightnvm.h b/linux-headers/include/linux/lightnvm.h deleted file mode 100644 index dac7591d8f5..00000000000 --- a/linux-headers/include/linux/lightnvm.h +++ /dev/null @@ -1,220 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright (C) 2015 CNEX Labs. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, - * USA. - */ - -#ifndef _LINUX_LIGHTNVM_H -#define _LINUX_LIGHTNVM_H - -#include -#include -#define DISK_NAME_LEN 32 - -#include -#include - -#define NVM_TTYPE_NAME_MAX 48 -#define NVM_TTYPE_MAX 63 -#define NVM_MMTYPE_LEN 8 - -#define NVM_CTRL_FILE "/dev/lightnvm/control" - -struct nvm_ioctl_info_tgt { - __u32 version[3]; - __u32 reserved; - char tgtname[NVM_TTYPE_NAME_MAX]; -}; - -struct nvm_ioctl_info { - __u32 version[3]; /* in/out - major, minor, patch */ - __u16 tgtsize; /* number of targets */ - __u16 reserved16; /* pad to 4K page */ - __u32 reserved[12]; - struct nvm_ioctl_info_tgt tgts[NVM_TTYPE_MAX]; -}; - -enum { - NVM_DEVICE_ACTIVE = 1 << 0, -}; - -struct nvm_ioctl_device_info { - char devname[DISK_NAME_LEN]; - char bmname[NVM_TTYPE_NAME_MAX]; - __u32 bmversion[3]; - __u32 flags; - __u32 reserved[8]; -}; - -struct nvm_ioctl_get_devices { - __u32 nr_devices; - __u32 reserved[31]; - struct nvm_ioctl_device_info info[31]; -}; - -struct nvm_ioctl_create_simple { - __u32 lun_begin; - __u32 lun_end; -}; - -struct nvm_ioctl_create_extended { - __u16 lun_begin; - __u16 lun_end; - __u16 op; - __u16 rsv; -}; - -enum { - NVM_CONFIG_TYPE_SIMPLE = 0, - NVM_CONFIG_TYPE_EXTENDED = 1, -}; - -struct nvm_ioctl_create_conf { - __u32 type; - union { - struct nvm_ioctl_create_simple s; - struct nvm_ioctl_create_extended e; - }; -}; - -enum { - NVM_TARGET_FACTORY = 1 << 0, /* Init target in factory mode */ -}; - -struct nvm_ioctl_create { - char dev[DISK_NAME_LEN]; /* open-channel SSD device */ - char tgttype[NVM_TTYPE_NAME_MAX]; /* target type name */ - char tgtname[DISK_NAME_LEN]; /* dev to expose target as */ - - __u32 flags; - - struct nvm_ioctl_create_conf conf; -}; - -struct nvm_ioctl_remove { - char tgtname[DISK_NAME_LEN]; - - __u32 flags; -}; - -struct nvm_ioctl_dev_init { - char dev[DISK_NAME_LEN]; /* open-channel SSD device */ - char mmtype[NVM_MMTYPE_LEN]; /* register to media manager */ - - __u32 flags; -}; - -enum { - NVM_FACTORY_ERASE_ONLY_USER = 1 << 0, /* erase only blocks used as - * host blks or grown blks */ - NVM_FACTORY_RESET_HOST_BLKS = 1 << 1, /* remove host blk marks */ - NVM_FACTORY_RESET_GRWN_BBLKS = 1 << 2, /* remove grown blk marks */ - NVM_FACTORY_NR_BITS = 1 << 3, /* stops here */ -}; - -struct nvm_ioctl_dev_factory { - char dev[DISK_NAME_LEN]; - - __u32 flags; -}; - -struct nvm_user_vio { - __u8 opcode; - __u8 flags; - __u16 control; - __u16 nppas; - __u16 rsvd; - __u64 metadata; - __u64 addr; - __u64 ppa_list; - __u32 metadata_len; - __u32 data_len; - __u64 status; - __u32 result; - __u32 rsvd3[3]; -}; - -struct nvm_passthru_vio { - __u8 opcode; - __u8 flags; - __u8 rsvd[2]; - __u32 nsid; - __u32 cdw2; - __u32 cdw3; - __u64 metadata; - __u64 addr; - __u32 metadata_len; - __u32 data_len; - __u64 ppa_list; - __u16 nppas; - __u16 control; - __u32 cdw13; - __u32 cdw14; - __u32 cdw15; - __u64 status; - __u32 result; - __u32 timeout_ms; -}; - -/* The ioctl type, 'L', 0x20 - 0x2F documented in ioctl-number.txt */ -enum { - /* top level cmds */ - NVM_INFO_CMD = 0x20, - NVM_GET_DEVICES_CMD, - - /* device level cmds */ - NVM_DEV_CREATE_CMD, - NVM_DEV_REMOVE_CMD, - - /* Init a device to support LightNVM media managers */ - NVM_DEV_INIT_CMD, - - /* Factory reset device */ - NVM_DEV_FACTORY_CMD, - - /* Vector user I/O */ - NVM_DEV_VIO_ADMIN_CMD = 0x41, - NVM_DEV_VIO_CMD = 0x42, - NVM_DEV_VIO_USER_CMD = 0x43, -}; - -#define NVM_IOCTL 'L' /* 0x4c */ - -#define NVM_INFO _IOWR(NVM_IOCTL, NVM_INFO_CMD, \ - struct nvm_ioctl_info) -#define NVM_GET_DEVICES _IOR(NVM_IOCTL, NVM_GET_DEVICES_CMD, \ - struct nvm_ioctl_get_devices) -#define NVM_DEV_CREATE _IOW(NVM_IOCTL, NVM_DEV_CREATE_CMD, \ - struct nvm_ioctl_create) -#define NVM_DEV_REMOVE _IOW(NVM_IOCTL, NVM_DEV_REMOVE_CMD, \ - struct nvm_ioctl_remove) -#define NVM_DEV_INIT _IOW(NVM_IOCTL, NVM_DEV_INIT_CMD, \ - struct nvm_ioctl_dev_init) -#define NVM_DEV_FACTORY _IOW(NVM_IOCTL, NVM_DEV_FACTORY_CMD, \ - struct nvm_ioctl_dev_factory) - -#define NVME_NVM_IOCTL_IO_VIO _IOWR(NVM_IOCTL, NVM_DEV_VIO_USER_CMD, \ - struct nvm_passthru_vio) -#define NVME_NVM_IOCTL_ADMIN_VIO _IOWR(NVM_IOCTL, NVM_DEV_VIO_ADMIN_CMD,\ - struct nvm_passthru_vio) -#define NVME_NVM_IOCTL_SUBMIT_VIO _IOWR(NVM_IOCTL, NVM_DEV_VIO_CMD,\ - struct nvm_user_vio) - -#define NVM_VERSION_MAJOR 1 -#define NVM_VERSION_MINOR 0 -#define NVM_VERSION_PATCHLEVEL 0 - -#endif diff --git a/linux-headers/include/linux/lirc.h b/linux-headers/include/linux/lirc.h index f99d9dcae66..8d7ca7c6af4 100644 --- a/linux-headers/include/linux/lirc.h +++ b/linux-headers/include/linux/lirc.h @@ -1,7 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ /* * lirc.h - linux infrared remote control header file - * last modified 2010/07/13 by Jarod Wilson */ #ifndef _LINUX_LIRC_H @@ -17,14 +16,16 @@ #define LIRC_MODE2_PULSE 0x01000000 #define LIRC_MODE2_FREQUENCY 0x02000000 #define LIRC_MODE2_TIMEOUT 0x03000000 +#define LIRC_MODE2_OVERFLOW 0x04000000 #define LIRC_VALUE_MASK 0x00FFFFFF #define LIRC_MODE2_MASK 0xFF000000 -#define LIRC_SPACE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_SPACE) -#define LIRC_PULSE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_PULSE) -#define LIRC_FREQUENCY(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY) -#define LIRC_TIMEOUT(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT) +#define LIRC_SPACE(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_SPACE) +#define LIRC_PULSE(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_PULSE) +#define LIRC_FREQUENCY(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY) +#define LIRC_TIMEOUT(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT) +#define LIRC_OVERFLOW(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_OVERFLOW) #define LIRC_VALUE(val) ((val)&LIRC_VALUE_MASK) #define LIRC_MODE2(val) ((val)&LIRC_MODE2_MASK) @@ -33,6 +34,7 @@ #define LIRC_IS_PULSE(val) (LIRC_MODE2(val) == LIRC_MODE2_PULSE) #define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY) #define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT) +#define LIRC_IS_OVERFLOW(val) (LIRC_MODE2(val) == LIRC_MODE2_OVERFLOW) /* used heavily by lirc userspace */ #define lirc_t int @@ -71,13 +73,10 @@ #define LIRC_CAN_REC_MASK LIRC_MODE2REC(LIRC_CAN_SEND_MASK) #define LIRC_CAN_SET_REC_CARRIER (LIRC_CAN_SET_SEND_CARRIER << 16) -#define LIRC_CAN_SET_REC_DUTY_CYCLE (LIRC_CAN_SET_SEND_DUTY_CYCLE << 16) -#define LIRC_CAN_SET_REC_DUTY_CYCLE_RANGE 0x40000000 #define LIRC_CAN_SET_REC_CARRIER_RANGE 0x80000000 #define LIRC_CAN_GET_REC_RESOLUTION 0x20000000 #define LIRC_CAN_SET_REC_TIMEOUT 0x10000000 -#define LIRC_CAN_SET_REC_FILTER 0x08000000 #define LIRC_CAN_MEASURE_CARRIER 0x02000000 #define LIRC_CAN_USE_WIDEBAND_RECEIVER 0x04000000 @@ -85,7 +84,12 @@ #define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK) #define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK) -#define LIRC_CAN_NOTIFY_DECODE 0x01000000 +/* + * Unused features. These features were never implemented, in tree or + * out of tree. These definitions are here so not to break the lircd build. + */ +#define LIRC_CAN_SET_REC_FILTER 0 +#define LIRC_CAN_NOTIFY_DECODE 0 /*** IOCTL commands for lirc driver ***/ @@ -139,7 +143,7 @@ */ #define LIRC_GET_REC_TIMEOUT _IOR('i', 0x00000024, __u32) -/* +/** * struct lirc_scancode - decoded scancode with protocol for use with * LIRC_MODE_SCANCODE * @@ -196,6 +200,7 @@ struct lirc_scancode { * @RC_PROTO_RCMM24: RC-MM protocol 24 bits * @RC_PROTO_RCMM32: RC-MM protocol 32 bits * @RC_PROTO_XBOX_DVD: Xbox DVD Movie Playback Kit protocol + * @RC_PROTO_MAX: Maximum value of enum rc_proto */ enum rc_proto { RC_PROTO_UNKNOWN = 0, @@ -226,6 +231,7 @@ enum rc_proto { RC_PROTO_RCMM24 = 25, RC_PROTO_RCMM32 = 26, RC_PROTO_XBOX_DVD = 27, + RC_PROTO_MAX = RC_PROTO_XBOX_DVD, }; #endif diff --git a/linux-headers/include/linux/loadpin.h b/linux-headers/include/linux/loadpin.h new file mode 100644 index 00000000000..e2701c5897f --- /dev/null +++ b/linux-headers/include/linux/loadpin.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Copyright (c) 2022, Google LLC + */ + +#ifndef _LINUX_LOOP_LOADPIN_H +#define _LINUX_LOOP_LOADPIN_H + +#define LOADPIN_IOC_MAGIC 'L' + +/** + * LOADPIN_IOC_SET_TRUSTED_VERITY_DIGESTS - Set up the root digests of verity devices + * that loadpin should trust. + * + * Takes a file descriptor from which to read the root digests of trusted verity devices. The file + * is expected to contain a list of digests in ASCII format, with one line per digest. The ioctl + * must be issued on the securityfs attribute 'loadpin/dm-verity' (which can be typically found + * under /sys/kernel/security/loadpin/dm-verity). + */ +#define LOADPIN_IOC_SET_TRUSTED_VERITY_DIGESTS _IOW(LOADPIN_IOC_MAGIC, 0x00, unsigned int) + +#endif /* _LINUX_LOOP_LOADPIN_H */ diff --git a/linux-headers/include/linux/loop.h b/linux-headers/include/linux/loop.h index ee94977e8f5..3d128de4e98 100644 --- a/linux-headers/include/linux/loop.h +++ b/linux-headers/include/linux/loop.h @@ -1,11 +1,6 @@ /* SPDX-License-Identifier: GPL-1.0+ WITH Linux-syscall-note */ /* - * include/linux/loop.h - * - * Written by Theodore Ts'o, 3/29/93. - * - * Copyright 1993 by Theodore Ts'o. Redistribution of this file is - * permitted under the GNU General Public License. + * Copyright 1993 by Theodore Ts'o. */ #ifndef _LINUX_LOOP_H #define _LINUX_LOOP_H @@ -45,7 +40,7 @@ struct loop_info { unsigned long lo_inode; /* ioctl r/o */ __kernel_old_dev_t lo_rdevice; /* ioctl r/o */ int lo_offset; - int lo_encrypt_type; + int lo_encrypt_type; /* obsolete, ignored */ int lo_encrypt_key_size; /* ioctl w/o */ int lo_flags; char lo_name[LO_NAME_SIZE]; @@ -61,7 +56,7 @@ struct loop_info64 { __u64 lo_offset; __u64 lo_sizelimit;/* bytes, 0 == max available */ __u32 lo_number; /* ioctl r/o */ - __u32 lo_encrypt_type; + __u32 lo_encrypt_type; /* obsolete, ignored */ __u32 lo_encrypt_key_size; /* ioctl w/o */ __u32 lo_flags; __u8 lo_file_name[LO_NAME_SIZE]; diff --git a/linux-headers/include/linux/lwtunnel.h b/linux-headers/include/linux/lwtunnel.h index b7c0191fd1b..9d22961be61 100644 --- a/linux-headers/include/linux/lwtunnel.h +++ b/linux-headers/include/linux/lwtunnel.h @@ -14,6 +14,8 @@ enum lwtunnel_encap_types { LWTUNNEL_ENCAP_BPF, LWTUNNEL_ENCAP_SEG6_LOCAL, LWTUNNEL_ENCAP_RPL, + LWTUNNEL_ENCAP_IOAM6, + LWTUNNEL_ENCAP_XFRM, __LWTUNNEL_ENCAP_MAX, }; @@ -110,4 +112,13 @@ enum { #define LWT_BPF_MAX_HEADROOM 256 +enum { + LWT_XFRM_UNSPEC, + LWT_XFRM_IF_ID, + LWT_XFRM_LINK, + __LWT_XFRM_MAX, +}; + +#define LWT_XFRM_MAX (__LWT_XFRM_MAX - 1) + #endif /* _LWTUNNEL_H_ */ diff --git a/linux-headers/include/linux/magic.h b/linux-headers/include/linux/magic.h index f3956fc11de..6325d1d0e90 100644 --- a/linux-headers/include/linux/magic.h +++ b/linux-headers/include/linux/magic.h @@ -6,6 +6,7 @@ #define AFFS_SUPER_MAGIC 0xadff #define AFS_SUPER_MAGIC 0x5346414F #define AUTOFS_SUPER_MAGIC 0x0187 +#define CEPH_SUPER_MAGIC 0x00c36400 #define CODA_SUPER_MAGIC 0x73757245 #define CRAMFS_MAGIC 0x28cd3d45 /* some random number */ #define CRAMFS_MAGIC_WEND 0x453dcd28 /* magic number with the wrong endianess */ @@ -35,6 +36,7 @@ #define EFIVARFS_MAGIC 0xde5e81e4 #define HOSTFS_SUPER_MAGIC 0x00c0ffee #define OVERLAYFS_SUPER_MAGIC 0x794c7630 +#define FUSE_SUPER_MAGIC 0x65735546 #define MINIX_SUPER_MAGIC 0x137F /* minix v1 fs, 14 char names */ #define MINIX_SUPER_MAGIC2 0x138F /* minix v1 fs, 30 char names */ @@ -43,6 +45,7 @@ #define MINIX3_SUPER_MAGIC 0x4d5a /* minix v3 fs, 60 char names */ #define MSDOS_SUPER_MAGIC 0x4d44 /* MD */ +#define EXFAT_SUPER_MAGIC 0x2011BAB0 #define NCP_SUPER_MAGIC 0x564c /* Guess, what 0x564c is :-) */ #define NFS_SUPER_MAGIC 0x6969 #define OCFS2_SUPER_MAGIC 0x7461636f @@ -51,6 +54,7 @@ #define QNX6_SUPER_MAGIC 0x68191122 /* qnx6 fs detection */ #define AFS_FS_MAGIC 0x6B414653 + #define REISERFS_SUPER_MAGIC 0x52654973 /* used by gcc */ /* used by file system utilities that look at the superblock, etc. */ @@ -59,6 +63,9 @@ #define REISER2FS_JR_SUPER_MAGIC_STRING "ReIsEr3Fs" #define SMB_SUPER_MAGIC 0x517B +#define CIFS_SUPER_MAGIC 0xFF534D42 /* the first four bytes of SMB PDUs */ +#define SMB2_SUPER_MAGIC 0xFE534D42 + #define CGROUP_SUPER_MAGIC 0x27e0eb #define CGROUP2_SUPER_MAGIC 0x63677270 @@ -91,11 +98,8 @@ /* Since UDF 2.01 is ISO 13346 based... */ #define UDF_SUPER_MAGIC 0x15013346 -#define BALLOON_KVM_MAGIC 0x13661366 -#define ZSMALLOC_MAGIC 0x58295829 #define DMA_BUF_MAGIC 0x444d4142 /* "DMAB" */ #define DEVMEM_MAGIC 0x454d444d /* "DMEM" */ -#define Z3FOLD_MAGIC 0x33 -#define PPC_CMM_MAGIC 0xc7571590 +#define SECRETMEM_MAGIC 0x5345434d /* "SECM" */ #endif /* __LINUX_MAGIC_H__ */ diff --git a/linux-headers/include/linux/major.h b/linux-headers/include/linux/major.h index 7e5fa8e15c4..4e5f2b3a3d5 100644 --- a/linux-headers/include/linux/major.h +++ b/linux-headers/include/linux/major.h @@ -34,8 +34,6 @@ #define GOLDSTAR_CDROM_MAJOR 16 #define OPTICS_CDROM_MAJOR 17 #define SANYO_CDROM_MAJOR 18 -#define CYCLADES_MAJOR 19 -#define CYCLADESAUX_MAJOR 20 #define MITSUMI_X_CDROM_MAJOR 20 #define MFM_ACORN_MAJOR 21 /* ARM Linux /dev/mfm */ #define SCSI_GENERIC_MAJOR 21 diff --git a/linux-headers/include/linux/map_to_14segment.h b/linux-headers/include/linux/map_to_14segment.h new file mode 100644 index 00000000000..0346ef76543 --- /dev/null +++ b/linux-headers/include/linux/map_to_14segment.h @@ -0,0 +1,241 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * Copyright (C) 2021 Glider bv + * + * Based on include/uapi/linux/map_to_7segment.h: + + * Copyright (c) 2005 Henk Vergonet + */ + +#ifndef MAP_TO_14SEGMENT_H +#define MAP_TO_14SEGMENT_H + +/* This file provides translation primitives and tables for the conversion + * of (ASCII) characters to a 14-segments notation. + * + * The 14 segment's wikipedia notation below is used as standard. + * See: https://en.wikipedia.org/wiki/Fourteen-segment_display + * + * Notation: +---a---+ + * |\ | /| + * f h i j b + * | \|/ | + * +-g1+-g2+ + * | /|\ | + * e k l m c + * |/ | \| + * +---d---+ + * + * Usage: + * + * Register a map variable, and fill it with a character set: + * static SEG14_DEFAULT_MAP(map_seg14); + * + * + * Then use for conversion: + * seg14 = map_to_seg14(&map_seg14, some_char); + * ... + * + * In device drivers it is recommended, if required, to make the char map + * accessible via the sysfs interface using the following scheme: + * + * static ssize_t map_seg14_show(struct device *dev, + * struct device_attribute *attr, char *buf) + * { + * memcpy(buf, &map_seg14, sizeof(map_seg14)); + * return sizeof(map_seg14); + * } + * static ssize_t map_seg14_store(struct device *dev, + * struct device_attribute *attr, + * const char *buf, size_t cnt) + * { + * if (cnt != sizeof(map_seg14)) + * return -EINVAL; + * memcpy(&map_seg14, buf, cnt); + * return cnt; + * } + * static DEVICE_ATTR_RW(map_seg14); + */ +#include +#include + +#include + +#define BIT_SEG14_A 0 +#define BIT_SEG14_B 1 +#define BIT_SEG14_C 2 +#define BIT_SEG14_D 3 +#define BIT_SEG14_E 4 +#define BIT_SEG14_F 5 +#define BIT_SEG14_G1 6 +#define BIT_SEG14_G2 7 +#define BIT_SEG14_H 8 +#define BIT_SEG14_I 9 +#define BIT_SEG14_J 10 +#define BIT_SEG14_K 11 +#define BIT_SEG14_L 12 +#define BIT_SEG14_M 13 +#define BIT_SEG14_RESERVED1 14 +#define BIT_SEG14_RESERVED2 15 + +struct seg14_conversion_map { + __be16 table[128]; +}; + +static __inline__ int map_to_seg14(struct seg14_conversion_map *map, int c) +{ + if (c < 0 || c >= sizeof(map->table) / sizeof(map->table[0])) + return -EINVAL; + + return __be16_to_cpu(map->table[c]); +} + +#define SEG14_CONVERSION_MAP(_name, _map) \ + struct seg14_conversion_map _name = { .table = { _map } } + +/* + * It is recommended to use a facility that allows user space to redefine + * custom character sets for LCD devices. Please use a sysfs interface + * as described above. + */ +#define MAP_TO_SEG14_SYSFS_FILE "map_seg14" + +/******************************************************************************* + * ASCII conversion table + ******************************************************************************/ + +#define _SEG14(sym, a, b, c, d, e, f, g1, g2, h, j, k, l, m, n) \ + __cpu_to_be16( a << BIT_SEG14_A | b << BIT_SEG14_B | \ + c << BIT_SEG14_C | d << BIT_SEG14_D | \ + e << BIT_SEG14_E | f << BIT_SEG14_F | \ + g1 << BIT_SEG14_G1 | g2 << BIT_SEG14_G2 | \ + h << BIT_SEG14_H | j << BIT_SEG14_I | \ + k << BIT_SEG14_J | l << BIT_SEG14_K | \ + m << BIT_SEG14_L | n << BIT_SEG14_M ) + +#define _MAP_0_32_ASCII_SEG14_NON_PRINTABLE \ + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, + +#define _MAP_33_47_ASCII_SEG14_SYMBOL \ + _SEG14('!', 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0), \ + _SEG14('"', 0, 1, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0), \ + _SEG14('#', 0, 1, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, 0), \ + _SEG14('$', 1, 0, 1, 1, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0), \ + _SEG14('%', 0, 0, 1, 0, 0, 1, 0, 0, 0, 0, 1, 1, 0, 0), \ + _SEG14('&', 1, 0, 0, 1, 1, 0, 1, 0, 1, 0, 1, 0, 0, 1), \ + _SEG14('\'',0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0), \ + _SEG14('(', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 1), \ + _SEG14(')', 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 1, 0, 0), \ + _SEG14('*', 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1), \ + _SEG14('+', 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0, 0, 1, 0), \ + _SEG14(',', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0), \ + _SEG14('-', 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0), \ + _SEG14('.', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1), \ + _SEG14('/', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0), + +#define _MAP_48_57_ASCII_SEG14_NUMERIC \ + _SEG14('0', 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 0, 0), \ + _SEG14('1', 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0), \ + _SEG14('2', 1, 1, 0, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0), \ + _SEG14('3', 1, 1, 1, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0), \ + _SEG14('4', 0, 1, 1, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0), \ + _SEG14('5', 1, 0, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0, 1), \ + _SEG14('6', 1, 0, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0), \ + _SEG14('7', 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0), \ + _SEG14('8', 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0), \ + _SEG14('9', 1, 1, 1, 1, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0), + +#define _MAP_58_64_ASCII_SEG14_SYMBOL \ + _SEG14(':', 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 1, 0), \ + _SEG14(';', 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0), \ + _SEG14('<', 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 1), \ + _SEG14('=', 0, 0, 0, 1, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0), \ + _SEG14('>', 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 1, 0, 0), \ + _SEG14('?', 1, 0, 0, 0, 0, 1, 0, 0, 0, 0, 1, 0, 1, 0), \ + _SEG14('@', 1, 1, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0), + +#define _MAP_65_90_ASCII_SEG14_ALPHA_UPPER \ + _SEG14('A', 1, 1, 1, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0), \ + _SEG14('B', 1, 1, 1, 1, 0, 0, 0, 1, 0, 1, 0, 0, 1, 0), \ + _SEG14('C', 1, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0), \ + _SEG14('D', 1, 1, 1, 1, 0, 0, 0, 0, 0, 1, 0, 0, 1, 0), \ + _SEG14('E', 1, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0), \ + _SEG14('F', 1, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0), \ + _SEG14('G', 1, 0, 1, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0), \ + _SEG14('H', 0, 1, 1, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0), \ + _SEG14('I', 1, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 1, 0), \ + _SEG14('J', 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0), \ + _SEG14('K', 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 1, 0, 0, 1), \ + _SEG14('L', 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0), \ + _SEG14('M', 0, 1, 1, 0, 1, 1, 0, 0, 1, 0, 1, 0, 0, 0), \ + _SEG14('N', 0, 1, 1, 0, 1, 1, 0, 0, 1, 0, 0, 0, 0, 1), \ + _SEG14('O', 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0), \ + _SEG14('P', 1, 1, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0), \ + _SEG14('Q', 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 1), \ + _SEG14('R', 1, 1, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 1), \ + _SEG14('S', 1, 0, 1, 1, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0), \ + _SEG14('T', 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 1, 0), \ + _SEG14('U', 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0), \ + _SEG14('V', 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 1, 1, 0, 0), \ + _SEG14('W', 0, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0, 1, 0, 1), \ + _SEG14('X', 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 1, 0, 1), \ + _SEG14('Y', 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0), \ + _SEG14('Z', 1, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0), + +#define _MAP_91_96_ASCII_SEG14_SYMBOL \ + _SEG14('[', 1, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0), \ + _SEG14('\\',0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 1), \ + _SEG14(']', 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0), \ + _SEG14('^', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1), \ + _SEG14('_', 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0), \ + _SEG14('`', 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0), + +#define _MAP_97_122_ASCII_SEG14_ALPHA_LOWER \ + _SEG14('a', 0, 0, 0, 1, 1, 0, 1, 0, 0, 0, 0, 0, 1, 0), \ + _SEG14('b', 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 1), \ + _SEG14('c', 0, 0, 0, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0), \ + _SEG14('d', 0, 1, 1, 1, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0), \ + _SEG14('e', 0, 0, 0, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0, 0), \ + _SEG14('f', 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 1, 0, 1, 0), \ + _SEG14('g', 0, 1, 1, 1, 0, 0, 0, 1, 0, 0, 1, 0, 0, 0), \ + _SEG14('h', 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 1, 0), \ + _SEG14('i', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0), \ + _SEG14('j', 0, 0, 0, 0, 1, 0, 0, 0, 0, 1, 0, 1, 0, 0), \ + _SEG14('k', 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 1), \ + _SEG14('l', 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0), \ + _SEG14('m', 0, 0, 1, 0, 1, 0, 1, 1, 0, 0, 0, 0, 1, 0), \ + _SEG14('n', 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 1, 0), \ + _SEG14('o', 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0), \ + _SEG14('p', 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0), \ + _SEG14('q', 0, 1, 1, 0, 0, 0, 0, 1, 0, 0, 1, 0, 0, 0), \ + _SEG14('r', 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0), \ + _SEG14('s', 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1), \ + _SEG14('t', 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0), \ + _SEG14('u', 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0), \ + _SEG14('v', 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 0, 0), \ + _SEG14('w', 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 1, 0, 1), \ + _SEG14('x', 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 1, 0, 1), \ + _SEG14('y', 0, 1, 1, 1, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0), \ + _SEG14('z', 0, 0, 0, 1, 0, 0, 1, 0, 0, 0, 0, 1, 0, 0), + +#define _MAP_123_126_ASCII_SEG14_SYMBOL \ + _SEG14('{', 1, 0, 0, 1, 0, 0, 1, 0, 1, 0, 0, 1, 0, 0), \ + _SEG14('|', 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 1, 0), \ + _SEG14('}', 1, 0, 0, 1, 0, 0, 0, 1, 0, 0, 1, 0, 0, 1), \ + _SEG14('~', 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 1, 1, 0, 0), + +/* Maps */ +#define MAP_ASCII14SEG_ALPHANUM \ + _MAP_0_32_ASCII_SEG14_NON_PRINTABLE \ + _MAP_33_47_ASCII_SEG14_SYMBOL \ + _MAP_48_57_ASCII_SEG14_NUMERIC \ + _MAP_58_64_ASCII_SEG14_SYMBOL \ + _MAP_65_90_ASCII_SEG14_ALPHA_UPPER \ + _MAP_91_96_ASCII_SEG14_SYMBOL \ + _MAP_97_122_ASCII_SEG14_ALPHA_LOWER \ + _MAP_123_126_ASCII_SEG14_SYMBOL + +#define SEG14_DEFAULT_MAP(_name) \ + SEG14_CONVERSION_MAP(_name, MAP_ASCII14SEG_ALPHANUM) + +#endif /* MAP_TO_14SEGMENT_H */ diff --git a/linux-headers/include/linux/map_to_7segment.h b/linux-headers/include/linux/map_to_7segment.h index 13a06e5e966..04c8b55812e 100644 --- a/linux-headers/include/linux/map_to_7segment.h +++ b/linux-headers/include/linux/map_to_7segment.h @@ -1,20 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ /* * Copyright (c) 2005 Henk Vergonet - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef MAP_TO_7SEGMENT_H @@ -45,17 +31,22 @@ * In device drivers it is recommended, if required, to make the char map * accessible via the sysfs interface using the following scheme: * - * static ssize_t show_map(struct device *dev, char *buf) { + * static ssize_t map_seg7_show(struct device *dev, + * struct device_attribute *attr, char *buf) + * { * memcpy(buf, &map_seg7, sizeof(map_seg7)); * return sizeof(map_seg7); * } - * static ssize_t store_map(struct device *dev, const char *buf, size_t cnt) { + * static ssize_t map_seg7_store(struct device *dev, + * struct device_attribute *attr, const char *buf, + * size_t cnt) + * { * if(cnt != sizeof(map_seg7)) * return -EINVAL; * memcpy(&map_seg7, buf, cnt); * return cnt; * } - * static DEVICE_ATTR(map_seg7, PERMS_RW, show_map, store_map); + * static DEVICE_ATTR_RW(map_seg7); * * History: * 2005-05-31 RFC linux-kernel@vger.kernel.org diff --git a/linux-headers/include/linux/mctp.h b/linux-headers/include/linux/mctp.h new file mode 100644 index 00000000000..154ab56651f --- /dev/null +++ b/linux-headers/include/linux/mctp.h @@ -0,0 +1,68 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Management Component Transport Protocol (MCTP) + * + * Copyright (c) 2021 Code Construct + * Copyright (c) 2021 Google + */ + +#ifndef __UAPI_MCTP_H +#define __UAPI_MCTP_H + +#include +#include +#include + +typedef __u8 mctp_eid_t; + +struct mctp_addr { + mctp_eid_t s_addr; +}; + +struct sockaddr_mctp { + __kernel_sa_family_t smctp_family; + __u16 __smctp_pad0; + unsigned int smctp_network; + struct mctp_addr smctp_addr; + __u8 smctp_type; + __u8 smctp_tag; + __u8 __smctp_pad1; +}; + +struct sockaddr_mctp_ext { + struct sockaddr_mctp smctp_base; + int smctp_ifindex; + __u8 smctp_halen; + __u8 __smctp_pad0[3]; + __u8 smctp_haddr[MAX_ADDR_LEN]; +}; + +#define MCTP_NET_ANY 0x0 + +#define MCTP_ADDR_NULL 0x00 +#define MCTP_ADDR_ANY 0xff + +#define MCTP_TAG_MASK 0x07 +#define MCTP_TAG_OWNER 0x08 +#define MCTP_TAG_PREALLOC 0x10 + +#define MCTP_OPT_ADDR_EXT 1 + +#define SIOCMCTPALLOCTAG (SIOCPROTOPRIVATE + 0) +#define SIOCMCTPDROPTAG (SIOCPROTOPRIVATE + 1) + +struct mctp_ioc_tag_ctl { + mctp_eid_t peer_addr; + + /* For SIOCMCTPALLOCTAG: must be passed as zero, kernel will + * populate with the allocated tag value. Returned tag value will + * always have TO and PREALLOC set. + * + * For SIOCMCTPDROPTAG: userspace provides tag value to drop, from + * a prior SIOCMCTPALLOCTAG call (and so must have TO and PREALLOC set). + */ + __u8 tag; + __u16 flags; +}; + +#endif /* __UAPI_MCTP_H */ diff --git a/linux-headers/include/linux/mdio.h b/linux-headers/include/linux/mdio.h index c6bbe8af7fb..d7c7bd0634c 100644 --- a/linux-headers/include/linux/mdio.h +++ b/linux-headers/include/linux/mdio.h @@ -53,18 +53,37 @@ #define MDIO_AN_EEE_LPABLE 61 /* EEE link partner ability */ #define MDIO_AN_EEE_ADV2 62 /* EEE advertisement 2 */ #define MDIO_AN_EEE_LPABLE2 63 /* EEE link partner ability 2 */ +#define MDIO_AN_CTRL2 64 /* AN THP bypass request control */ /* Media-dependent registers. */ #define MDIO_PMA_10GBT_SWAPPOL 130 /* 10GBASE-T pair swap & polarity */ #define MDIO_PMA_10GBT_TXPWR 131 /* 10GBASE-T TX power control */ #define MDIO_PMA_10GBT_SNR 133 /* 10GBASE-T SNR margin, lane A. * Lanes B-D are numbered 134-136. */ +#define MDIO_PMA_10GBR_FSRT_CSR 147 /* 10GBASE-R fast retrain status and control */ #define MDIO_PMA_10GBR_FECABLE 170 /* 10GBASE-R FEC ability */ #define MDIO_PCS_10GBX_STAT1 24 /* 10GBASE-X PCS status 1 */ #define MDIO_PCS_10GBRT_STAT1 32 /* 10GBASE-R/-T PCS status 1 */ #define MDIO_PCS_10GBRT_STAT2 33 /* 10GBASE-R/-T PCS status 2 */ #define MDIO_AN_10GBT_CTRL 32 /* 10GBASE-T auto-negotiation control */ #define MDIO_AN_10GBT_STAT 33 /* 10GBASE-T auto-negotiation status */ +#define MDIO_B10L_PMA_CTRL 2294 /* 10BASE-T1L PMA control */ +#define MDIO_PMA_10T1L_STAT 2295 /* 10BASE-T1L PMA status */ +#define MDIO_PCS_10T1L_CTRL 2278 /* 10BASE-T1L PCS control */ +#define MDIO_PMA_PMD_BT1 18 /* BASE-T1 PMA/PMD extended ability */ +#define MDIO_AN_T1_CTRL 512 /* BASE-T1 AN control */ +#define MDIO_AN_T1_STAT 513 /* BASE-T1 AN status */ +#define MDIO_AN_T1_ADV_L 514 /* BASE-T1 AN advertisement register [15:0] */ +#define MDIO_AN_T1_ADV_M 515 /* BASE-T1 AN advertisement register [31:16] */ +#define MDIO_AN_T1_ADV_H 516 /* BASE-T1 AN advertisement register [47:32] */ +#define MDIO_AN_T1_LP_L 517 /* BASE-T1 AN LP Base Page ability register [15:0] */ +#define MDIO_AN_T1_LP_M 518 /* BASE-T1 AN LP Base Page ability register [31:16] */ +#define MDIO_AN_T1_LP_H 519 /* BASE-T1 AN LP Base Page ability register [47:32] */ +#define MDIO_AN_10BT1_AN_CTRL 526 /* 10BASE-T1 AN control register */ +#define MDIO_AN_10BT1_AN_STAT 527 /* 10BASE-T1 AN status register */ +#define MDIO_PMA_PMD_BT1_CTRL 2100 /* BASE-T1 PMA/PMD control register */ +#define MDIO_PCS_1000BT1_CTRL 2304 /* 1000BASE-T1 PCS control register */ +#define MDIO_PCS_1000BT1_STAT 2305 /* 1000BASE-T1 PCS status register */ /* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */ #define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */ @@ -120,6 +139,8 @@ #define MDIO_PMA_SPEED_100 0x0020 /* 100M capable */ #define MDIO_PMA_SPEED_10 0x0040 /* 10M capable */ #define MDIO_PCS_SPEED_10P2B 0x0002 /* 10PASS-TS/2BASE-TL capable */ +#define MDIO_PCS_SPEED_2_5G 0x0040 /* 2.5G capable */ +#define MDIO_PCS_SPEED_5G 0x0080 /* 5G capable */ /* Device present registers. */ #define MDIO_DEVS_PRESENT(devad) (1 << (devad)) @@ -155,6 +176,7 @@ #define MDIO_PMA_CTRL2_10BT 0x000f /* 10BASE-T type */ #define MDIO_PMA_CTRL2_2_5GBT 0x0030 /* 2.5GBaseT type */ #define MDIO_PMA_CTRL2_5GBT 0x0031 /* 5GBaseT type */ +#define MDIO_PMA_CTRL2_BASET1 0x003D /* BASE-T1 type */ #define MDIO_PCS_CTRL2_TYPE 0x0003 /* PCS type selection */ #define MDIO_PCS_CTRL2_10GBR 0x0000 /* 10GBASE-R type */ #define MDIO_PCS_CTRL2_10GBX 0x0001 /* 10GBASE-X type */ @@ -208,8 +230,33 @@ #define MDIO_PMA_EXTABLE_1000BKX 0x0040 /* 1000BASE-KX ability */ #define MDIO_PMA_EXTABLE_100BTX 0x0080 /* 100BASE-TX ability */ #define MDIO_PMA_EXTABLE_10BT 0x0100 /* 10BASE-T ability */ +#define MDIO_PMA_EXTABLE_BT1 0x0800 /* BASE-T1 ability */ #define MDIO_PMA_EXTABLE_NBT 0x4000 /* 2.5/5GBASE-T ability */ +/* AN Clause 73 linkword */ +#define MDIO_AN_C73_0_S_MASK GENMASK(4, 0) +#define MDIO_AN_C73_0_E_MASK GENMASK(9, 5) +#define MDIO_AN_C73_0_PAUSE BIT(10) +#define MDIO_AN_C73_0_ASM_DIR BIT(11) +#define MDIO_AN_C73_0_C2 BIT(12) +#define MDIO_AN_C73_0_RF BIT(13) +#define MDIO_AN_C73_0_ACK BIT(14) +#define MDIO_AN_C73_0_NP BIT(15) +#define MDIO_AN_C73_1_T_MASK GENMASK(4, 0) +#define MDIO_AN_C73_1_1000BASE_KX BIT(5) +#define MDIO_AN_C73_1_10GBASE_KX4 BIT(6) +#define MDIO_AN_C73_1_10GBASE_KR BIT(7) +#define MDIO_AN_C73_1_40GBASE_KR4 BIT(8) +#define MDIO_AN_C73_1_40GBASE_CR4 BIT(9) +#define MDIO_AN_C73_1_100GBASE_CR10 BIT(10) +#define MDIO_AN_C73_1_100GBASE_KP4 BIT(11) +#define MDIO_AN_C73_1_100GBASE_KR4 BIT(12) +#define MDIO_AN_C73_1_100GBASE_CR4 BIT(13) +#define MDIO_AN_C73_1_25GBASE_R_S BIT(14) +#define MDIO_AN_C73_1_25GBASE_R BIT(15) +#define MDIO_AN_C73_2_2500BASE_KX BIT(0) +#define MDIO_AN_C73_2_5GBASE_KR BIT(1) + /* PHY XGXS lane state register. */ #define MDIO_PHYXS_LNSTAT_SYNC0 0x0001 #define MDIO_PHYXS_LNSTAT_SYNC1 0x0002 @@ -237,6 +284,9 @@ #define MDIO_PMA_10GBR_FECABLE_ABLE 0x0001 /* FEC ability */ #define MDIO_PMA_10GBR_FECABLE_ERRABLE 0x0002 /* FEC error indic. ability */ +/* PMA 10GBASE-R Fast Retrain status and control register. */ +#define MDIO_PMA_10GBR_FSRT_ENABLE 0x0001 /* Fast retrain enable */ + /* PCS 10GBASE-R/-T status register 1. */ #define MDIO_PCS_10GBRT_STAT1_BLKLK 0x0001 /* Block lock attained */ @@ -245,6 +295,7 @@ #define MDIO_PCS_10GBRT_STAT2_BER 0x3f00 /* AN 10GBASE-T control register. */ +#define MDIO_AN_10GBT_CTRL_ADVFSRT2_5G 0x0020 /* Advertise 2.5GBASE-T fast retrain */ #define MDIO_AN_10GBT_CTRL_ADV2_5G 0x0080 /* Advertise 2.5GBASE-T */ #define MDIO_AN_10GBT_CTRL_ADV5G 0x0100 /* Advertise 5GBASE-T */ #define MDIO_AN_10GBT_CTRL_ADV10G 0x1000 /* Advertise 10GBASE-T */ @@ -260,6 +311,86 @@ #define MDIO_AN_10GBT_STAT_MS 0x4000 /* Master/slave config */ #define MDIO_AN_10GBT_STAT_MSFLT 0x8000 /* Master/slave config fault */ +/* 10BASE-T1L PMA control */ +#define MDIO_PMA_10T1L_CTRL_LB_EN 0x0001 /* Enable loopback mode */ +#define MDIO_PMA_10T1L_CTRL_EEE_EN 0x0400 /* Enable EEE mode */ +#define MDIO_PMA_10T1L_CTRL_LOW_POWER 0x0800 /* Low-power mode */ +#define MDIO_PMA_10T1L_CTRL_2V4_EN 0x1000 /* Enable 2.4 Vpp operating mode */ +#define MDIO_PMA_10T1L_CTRL_TX_DIS 0x4000 /* Transmit disable */ +#define MDIO_PMA_10T1L_CTRL_PMA_RST 0x8000 /* MA reset */ + +/* 10BASE-T1L PMA status register. */ +#define MDIO_PMA_10T1L_STAT_LINK 0x0001 /* PMA receive link up */ +#define MDIO_PMA_10T1L_STAT_FAULT 0x0002 /* Fault condition detected */ +#define MDIO_PMA_10T1L_STAT_POLARITY 0x0004 /* Receive polarity is reversed */ +#define MDIO_PMA_10T1L_STAT_RECV_FAULT 0x0200 /* Able to detect fault on receive path */ +#define MDIO_PMA_10T1L_STAT_EEE 0x0400 /* PHY has EEE ability */ +#define MDIO_PMA_10T1L_STAT_LOW_POWER 0x0800 /* PMA has low-power ability */ +#define MDIO_PMA_10T1L_STAT_2V4_ABLE 0x1000 /* PHY has 2.4 Vpp operating mode ability */ +#define MDIO_PMA_10T1L_STAT_LB_ABLE 0x2000 /* PHY has loopback ability */ + +/* 10BASE-T1L PCS control register. */ +#define MDIO_PCS_10T1L_CTRL_LB 0x4000 /* Enable PCS level loopback mode */ +#define MDIO_PCS_10T1L_CTRL_RESET 0x8000 /* PCS reset */ + +/* BASE-T1 PMA/PMD extended ability register. */ +#define MDIO_PMA_PMD_BT1_B100_ABLE 0x0001 /* 100BASE-T1 Ability */ +#define MDIO_PMA_PMD_BT1_B1000_ABLE 0x0002 /* 1000BASE-T1 Ability */ +#define MDIO_PMA_PMD_BT1_B10L_ABLE 0x0004 /* 10BASE-T1L Ability */ + +/* BASE-T1 auto-negotiation advertisement register [15:0] */ +#define MDIO_AN_T1_ADV_L_PAUSE_CAP ADVERTISE_PAUSE_CAP +#define MDIO_AN_T1_ADV_L_PAUSE_ASYM ADVERTISE_PAUSE_ASYM +#define MDIO_AN_T1_ADV_L_FORCE_MS 0x1000 /* Force Master/slave Configuration */ +#define MDIO_AN_T1_ADV_L_REMOTE_FAULT ADVERTISE_RFAULT +#define MDIO_AN_T1_ADV_L_ACK ADVERTISE_LPACK +#define MDIO_AN_T1_ADV_L_NEXT_PAGE_REQ ADVERTISE_NPAGE + +/* BASE-T1 auto-negotiation advertisement register [31:16] */ +#define MDIO_AN_T1_ADV_M_B10L 0x4000 /* device is compatible with 10BASE-T1L */ +#define MDIO_AN_T1_ADV_M_MST 0x0010 /* advertise master preference */ + +/* BASE-T1 auto-negotiation advertisement register [47:32] */ +#define MDIO_AN_T1_ADV_H_10L_TX_HI_REQ 0x1000 /* 10BASE-T1L High Level Transmit Request */ +#define MDIO_AN_T1_ADV_H_10L_TX_HI 0x2000 /* 10BASE-T1L High Level Transmit Ability */ + +/* BASE-T1 AN LP Base Page ability register [15:0] */ +#define MDIO_AN_T1_LP_L_PAUSE_CAP LPA_PAUSE_CAP +#define MDIO_AN_T1_LP_L_PAUSE_ASYM LPA_PAUSE_ASYM +#define MDIO_AN_T1_LP_L_FORCE_MS 0x1000 /* LP Force Master/slave Configuration */ +#define MDIO_AN_T1_LP_L_REMOTE_FAULT LPA_RFAULT +#define MDIO_AN_T1_LP_L_ACK LPA_LPACK +#define MDIO_AN_T1_LP_L_NEXT_PAGE_REQ LPA_NPAGE + +/* BASE-T1 AN LP Base Page ability register [31:16] */ +#define MDIO_AN_T1_LP_M_MST 0x0010 /* LP master preference */ +#define MDIO_AN_T1_LP_M_B10L 0x4000 /* LP is compatible with 10BASE-T1L */ + +/* BASE-T1 AN LP Base Page ability register [47:32] */ +#define MDIO_AN_T1_LP_H_10L_TX_HI_REQ 0x1000 /* 10BASE-T1L High Level LP Transmit Request */ +#define MDIO_AN_T1_LP_H_10L_TX_HI 0x2000 /* 10BASE-T1L High Level LP Transmit Ability */ + +/* 10BASE-T1 AN control register */ +#define MDIO_AN_10BT1_AN_CTRL_ADV_EEE_T1L 0x4000 /* 10BASE-T1L EEE ability advertisement */ + +/* 10BASE-T1 AN status register */ +#define MDIO_AN_10BT1_AN_STAT_LPA_EEE_T1L 0x4000 /* 10BASE-T1L LP EEE ability advertisement */ + +/* BASE-T1 PMA/PMD control register */ +#define MDIO_PMA_PMD_BT1_CTRL_STRAP 0x000F /* Type selection (Strap) */ +#define MDIO_PMA_PMD_BT1_CTRL_STRAP_B1000 0x0001 /* Select 1000BASE-T1 */ +#define MDIO_PMA_PMD_BT1_CTRL_CFG_MST 0x4000 /* MASTER-SLAVE config value */ + +/* 1000BASE-T1 PCS control register */ +#define MDIO_PCS_1000BT1_CTRL_LOW_POWER 0x0800 /* Low power mode */ +#define MDIO_PCS_1000BT1_CTRL_DISABLE_TX 0x4000 /* Global PMA transmit disable */ +#define MDIO_PCS_1000BT1_CTRL_RESET 0x8000 /* Software reset value */ + +/* 1000BASE-T1 PCS status register */ +#define MDIO_PCS_1000BT1_STAT_LINK 0x0004 /* PCS Link is up */ +#define MDIO_PCS_1000BT1_STAT_FAULT 0x0080 /* There is a fault condition */ + + /* EEE Supported/Advertisement/LP Advertisement registers. * * EEE capability Register (3.20), Advertisement (7.60) and @@ -287,6 +418,9 @@ #define MDIO_EEE_2_5GT 0x0001 /* 2.5GT EEE cap */ #define MDIO_EEE_5GT 0x0002 /* 5GT EEE cap */ +/* AN MultiGBASE-T AN control 2 */ +#define MDIO_AN_THP_BP2_5GT 0x0008 /* 2.5GT THP bypass request */ + /* 2.5G/5G Extended abilities register. */ #define MDIO_PMA_NG_EXTABLE_2_5GBT 0x0001 /* 2.5GBASET ability */ #define MDIO_PMA_NG_EXTABLE_5GBT 0x0002 /* 5GBASET ability */ diff --git a/linux-headers/include/linux/media-bus-format.h b/linux-headers/include/linux/media-bus-format.h index 84fa53ffb13..a03c543cb07 100644 --- a/linux-headers/include/linux/media-bus-format.h +++ b/linux-headers/include/linux/media-bus-format.h @@ -34,7 +34,7 @@ #define MEDIA_BUS_FMT_FIXED 0x0001 -/* RGB - next is 0x101d */ +/* RGB - next is 0x1025 */ #define MEDIA_BUS_FMT_RGB444_1X12 0x1016 #define MEDIA_BUS_FMT_RGB444_2X8_PADHI_BE 0x1001 #define MEDIA_BUS_FMT_RGB444_2X8_PADHI_LE 0x1002 @@ -46,8 +46,11 @@ #define MEDIA_BUS_FMT_RGB565_2X8_BE 0x1007 #define MEDIA_BUS_FMT_RGB565_2X8_LE 0x1008 #define MEDIA_BUS_FMT_RGB666_1X18 0x1009 +#define MEDIA_BUS_FMT_BGR666_1X18 0x1023 #define MEDIA_BUS_FMT_RBG888_1X24 0x100e #define MEDIA_BUS_FMT_RGB666_1X24_CPADHI 0x1015 +#define MEDIA_BUS_FMT_BGR666_1X24_CPADHI 0x1024 +#define MEDIA_BUS_FMT_RGB565_1X24_CPADHI 0x1022 #define MEDIA_BUS_FMT_RGB666_1X7X3_SPWG 0x1010 #define MEDIA_BUS_FMT_BGR888_1X24 0x1013 #define MEDIA_BUS_FMT_BGR888_3X8 0x101b @@ -56,15 +59,20 @@ #define MEDIA_BUS_FMT_RGB888_2X12_BE 0x100b #define MEDIA_BUS_FMT_RGB888_2X12_LE 0x100c #define MEDIA_BUS_FMT_RGB888_3X8 0x101c +#define MEDIA_BUS_FMT_RGB888_3X8_DELTA 0x101d #define MEDIA_BUS_FMT_RGB888_1X7X4_SPWG 0x1011 #define MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA 0x1012 +#define MEDIA_BUS_FMT_RGB666_1X30_CPADLO 0x101e +#define MEDIA_BUS_FMT_RGB888_1X30_CPADLO 0x101f #define MEDIA_BUS_FMT_ARGB8888_1X32 0x100d #define MEDIA_BUS_FMT_RGB888_1X32_PADHI 0x100f #define MEDIA_BUS_FMT_RGB101010_1X30 0x1018 +#define MEDIA_BUS_FMT_RGB666_1X36_CPADLO 0x1020 +#define MEDIA_BUS_FMT_RGB888_1X36_CPADLO 0x1021 #define MEDIA_BUS_FMT_RGB121212_1X36 0x1019 #define MEDIA_BUS_FMT_RGB161616_1X48 0x101a -/* YUV (including grey) - next is 0x202e */ +/* YUV (including grey) - next is 0x202f */ #define MEDIA_BUS_FMT_Y8_1X8 0x2001 #define MEDIA_BUS_FMT_UV8_1X8 0x2015 #define MEDIA_BUS_FMT_UYVY8_1_5X8 0x2002 @@ -87,6 +95,7 @@ #define MEDIA_BUS_FMT_YUYV12_2X12 0x201e #define MEDIA_BUS_FMT_YVYU12_2X12 0x201f #define MEDIA_BUS_FMT_Y14_1X14 0x202d +#define MEDIA_BUS_FMT_Y16_1X16 0x202e #define MEDIA_BUS_FMT_UYVY8_1X16 0x200f #define MEDIA_BUS_FMT_VYUY8_1X16 0x2010 #define MEDIA_BUS_FMT_YUYV8_1X16 0x2011 @@ -156,4 +165,12 @@ /* HSV - next is 0x6002 */ #define MEDIA_BUS_FMT_AHSV8888_1X32 0x6001 +/* + * This format should be used when the same driver handles + * both sides of the link and the bus format is a fixed + * metadata format that is not configurable from userspace. + * Width and height will be set to 0 for this format. + */ +#define MEDIA_BUS_FMT_METADATA_FIXED 0x7001 + #endif /* __LINUX_MEDIA_BUS_FORMAT_H */ diff --git a/linux-headers/include/linux/media.h b/linux-headers/include/linux/media.h index f4ba8ae3e41..b5a77bbf406 100644 --- a/linux-headers/include/linux/media.h +++ b/linux-headers/include/linux/media.h @@ -20,7 +20,6 @@ #ifndef __LINUX_MEDIA_H #define __LINUX_MEDIA_H -#include #include #include @@ -125,6 +124,7 @@ struct media_device_info { #define MEDIA_ENT_F_PROC_VIDEO_STATISTICS (MEDIA_ENT_F_BASE + 0x4006) #define MEDIA_ENT_F_PROC_VIDEO_ENCODER (MEDIA_ENT_F_BASE + 0x4007) #define MEDIA_ENT_F_PROC_VIDEO_DECODER (MEDIA_ENT_F_BASE + 0x4008) +#define MEDIA_ENT_F_PROC_VIDEO_ISP (MEDIA_ENT_F_BASE + 0x4009) /* * Switch and bridge entity functions @@ -140,8 +140,8 @@ struct media_device_info { #define MEDIA_ENT_F_DV_ENCODER (MEDIA_ENT_F_BASE + 0x6002) /* Entity flags */ -#define MEDIA_ENT_FL_DEFAULT (1 << 0) -#define MEDIA_ENT_FL_CONNECTOR (1 << 1) +#define MEDIA_ENT_FL_DEFAULT (1U << 0) +#define MEDIA_ENT_FL_CONNECTOR (1U << 1) /* OR with the entity id value to find the next entity */ #define MEDIA_ENT_ID_FLAG_NEXT (1U << 31) @@ -203,9 +203,9 @@ struct media_entity_desc { }; }; -#define MEDIA_PAD_FL_SINK (1 << 0) -#define MEDIA_PAD_FL_SOURCE (1 << 1) -#define MEDIA_PAD_FL_MUST_CONNECT (1 << 2) +#define MEDIA_PAD_FL_SINK (1U << 0) +#define MEDIA_PAD_FL_SOURCE (1U << 1) +#define MEDIA_PAD_FL_MUST_CONNECT (1U << 2) struct media_pad_desc { __u32 entity; /* entity ID */ @@ -214,13 +214,14 @@ struct media_pad_desc { __u32 reserved[2]; }; -#define MEDIA_LNK_FL_ENABLED (1 << 0) -#define MEDIA_LNK_FL_IMMUTABLE (1 << 1) -#define MEDIA_LNK_FL_DYNAMIC (1 << 2) +#define MEDIA_LNK_FL_ENABLED (1U << 0) +#define MEDIA_LNK_FL_IMMUTABLE (1U << 1) +#define MEDIA_LNK_FL_DYNAMIC (1U << 2) #define MEDIA_LNK_FL_LINK_TYPE (0xf << 28) -# define MEDIA_LNK_FL_DATA_LINK (0 << 28) -# define MEDIA_LNK_FL_INTERFACE_LINK (1 << 28) +# define MEDIA_LNK_FL_DATA_LINK (0U << 28) +# define MEDIA_LNK_FL_INTERFACE_LINK (1U << 28) +# define MEDIA_LNK_FL_ANCILLARY_LINK (2U << 28) struct media_link_desc { struct media_pad_desc source; @@ -275,7 +276,7 @@ struct media_links_enum { * struct media_device_info. */ #define MEDIA_V2_ENTITY_HAS_FLAGS(media_version) \ - ((media_version) >= ((4 << 16) | (19 << 8) | 0)) + ((media_version) >= ((4U << 16) | (19U << 8) | 0U)) struct media_v2_entity { __u32 id; @@ -310,7 +311,7 @@ struct media_v2_interface { * struct media_device_info. */ #define MEDIA_V2_PAD_HAS_INDEX(media_version) \ - ((media_version) >= ((4 << 16) | (19 << 8) | 0)) + ((media_version) >= ((4U << 16) | (19U << 8) | 0U)) struct media_v2_pad { __u32 id; @@ -413,7 +414,7 @@ struct media_v2_topology { #define MEDIA_INTF_T_ALSA_TIMER (MEDIA_INTF_T_ALSA_BASE + 7) /* Obsolete symbol for media_version, no longer used in the kernel */ -#define MEDIA_API_VERSION ((0 << 16) | (1 << 8) | 0) +#define MEDIA_API_VERSION ((0U << 16) | (1U << 8) | 0U) #endif /* __LINUX_MEDIA_H */ diff --git a/linux-headers/include/linux/mei.h b/linux-headers/include/linux/mei.h index 4f3638489d0..6e57743628c 100644 --- a/linux-headers/include/linux/mei.h +++ b/linux-headers/include/linux/mei.h @@ -7,7 +7,7 @@ #ifndef _LINUX_MEI_H #define _LINUX_MEI_H -#include +#include /* * This IOCTL is used to associate the current file descriptor with a diff --git a/linux-headers/include/linux/mei_uuid.h b/linux-headers/include/linux/mei_uuid.h new file mode 100644 index 00000000000..ed323a857ea --- /dev/null +++ b/linux-headers/include/linux/mei_uuid.h @@ -0,0 +1,29 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * MEI UUID definition + * + * Copyright (C) 2010, Intel Corp. + * Huang Ying + */ + +#ifndef _LINUX_MEI_UUID_H_ +#define _LINUX_MEI_UUID_H_ + +#include + +typedef struct { + __u8 b[16]; +} uuid_le; + +#define UUID_LE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) \ +((uuid_le) \ +{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \ + (b) & 0xff, ((b) >> 8) & 0xff, \ + (c) & 0xff, ((c) >> 8) & 0xff, \ + (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }}) + +#define NULL_UUID_LE \ + UUID_LE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00) + +#endif /* _LINUX_MEI_UUID_H_ */ diff --git a/linux-headers/include/linux/membarrier.h b/linux-headers/include/linux/membarrier.h index 6d7f451c3d1..31de17a366d 100644 --- a/linux-headers/include/linux/membarrier.h +++ b/linux-headers/include/linux/membarrier.h @@ -137,6 +137,9 @@ * @MEMBARRIER_CMD_SHARED: * Alias to MEMBARRIER_CMD_GLOBAL. Provided for * header backward compatibility. + * @MEMBARRIER_CMD_GET_REGISTRATIONS: + * Returns a bitmask of previously issued + * registration commands. * * Command to be passed to the membarrier system call. The commands need to * be a single bit each, except for MEMBARRIER_CMD_QUERY which is assigned to @@ -153,6 +156,7 @@ enum membarrier_cmd { MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_SYNC_CORE = (1 << 6), MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ = (1 << 7), MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_RSEQ = (1 << 8), + MEMBARRIER_CMD_GET_REGISTRATIONS = (1 << 9), /* Alias for header backward compatibility. */ MEMBARRIER_CMD_SHARED = MEMBARRIER_CMD_GLOBAL, diff --git a/linux-headers/include/linux/memfd.h b/linux-headers/include/linux/memfd.h index 39ed783fac9..01c0324e773 100644 --- a/linux-headers/include/linux/memfd.h +++ b/linux-headers/include/linux/memfd.h @@ -8,6 +8,10 @@ #define MFD_CLOEXEC 0x0001U #define MFD_ALLOW_SEALING 0x0002U #define MFD_HUGETLB 0x0004U +/* not executable and sealed to prevent changing to executable. */ +#define MFD_NOEXEC_SEAL 0x0008U +/* executable */ +#define MFD_EXEC 0x0010U /* * Huge page size encoding when MFD_HUGETLB is specified, and a huge page diff --git a/linux-headers/include/linux/mempolicy.h b/linux-headers/include/linux/mempolicy.h index e60adbb0d70..958a15729f6 100644 --- a/linux-headers/include/linux/mempolicy.h +++ b/linux-headers/include/linux/mempolicy.h @@ -22,18 +22,21 @@ enum { MPOL_BIND, MPOL_INTERLEAVE, MPOL_LOCAL, + MPOL_PREFERRED_MANY, MPOL_MAX, /* always last member of enum */ }; /* Flags for set_mempolicy */ #define MPOL_F_STATIC_NODES (1 << 15) #define MPOL_F_RELATIVE_NODES (1 << 14) +#define MPOL_F_NUMA_BALANCING (1 << 13) /* Optimize with NUMA balancing if possible */ /* * MPOL_MODE_FLAGS is the union of all possible optional mode flags passed to * either set_mempolicy() or mbind(). */ -#define MPOL_MODE_FLAGS (MPOL_F_STATIC_NODES | MPOL_F_RELATIVE_NODES) +#define MPOL_MODE_FLAGS \ + (MPOL_F_STATIC_NODES | MPOL_F_RELATIVE_NODES | MPOL_F_NUMA_BALANCING) /* Flags for get_mempolicy */ #define MPOL_F_NODE (1<<0) /* return next IL mode instead of node mask */ @@ -58,9 +61,15 @@ enum { * are never OR'ed into the mode in mempolicy API arguments. */ #define MPOL_F_SHARED (1 << 0) /* identify shared policies */ -#define MPOL_F_LOCAL (1 << 1) /* preferred local allocation */ #define MPOL_F_MOF (1 << 3) /* this policy wants migrate on fault */ #define MPOL_F_MORON (1 << 4) /* Migrate On protnone Reference On Node */ +/* + * These bit locations are exposed in the vm.zone_reclaim_mode sysctl + * ABI. New bits are OK, but existing bits can never change. + */ +#define RECLAIM_ZONE (1<<0) /* Run shrink_inactive_list on the zone */ +#define RECLAIM_WRITE (1<<1) /* Writeout pages during reclaim */ +#define RECLAIM_UNMAP (1<<2) /* Unmap pages during reclaim */ #endif /* _LINUX_MEMPOLICY_H */ diff --git a/linux-headers/include/linux/meye.h b/linux-headers/include/linux/meye.h deleted file mode 100644 index de9e3a954f3..00000000000 --- a/linux-headers/include/linux/meye.h +++ /dev/null @@ -1,65 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ -/* - * Motion Eye video4linux driver for Sony Vaio PictureBook - * - * Copyright (C) 2001-2003 Stelian Pop - * - * Copyright (C) 2001-2002 Alcôve - * - * Copyright (C) 2000 Andrew Tridgell - * - * Earlier work by Werner Almesberger, Paul `Rusty' Russell and Paul Mackerras. - * - * Some parts borrowed from various video4linux drivers, especially - * bttv-driver.c and zoran.c, see original files for credits. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _MEYE_H_ -#define _MEYE_H_ - -/****************************************************************************/ -/* Private API for handling mjpeg capture / playback. */ -/****************************************************************************/ - -struct meye_params { - unsigned char subsample; - unsigned char quality; - unsigned char sharpness; - unsigned char agc; - unsigned char picture; - unsigned char framerate; -}; - -/* query the extended parameters */ -#define MEYEIOC_G_PARAMS _IOR ('v', BASE_VIDIOC_PRIVATE+0, struct meye_params) -/* set the extended parameters */ -#define MEYEIOC_S_PARAMS _IOW ('v', BASE_VIDIOC_PRIVATE+1, struct meye_params) -/* queue a buffer for mjpeg capture */ -#define MEYEIOC_QBUF_CAPT _IOW ('v', BASE_VIDIOC_PRIVATE+2, int) -/* sync a previously queued mjpeg buffer */ -#define MEYEIOC_SYNC _IOWR('v', BASE_VIDIOC_PRIVATE+3, int) -/* get a still uncompressed snapshot */ -#define MEYEIOC_STILLCAPT _IO ('v', BASE_VIDIOC_PRIVATE+4) -/* get a jpeg compressed snapshot */ -#define MEYEIOC_STILLJCAPT _IOR ('v', BASE_VIDIOC_PRIVATE+5, int) - -/* V4L2 private controls */ -#define V4L2_CID_MEYE_AGC (V4L2_CID_USER_MEYE_BASE + 0) -#define V4L2_CID_MEYE_PICTURE (V4L2_CID_USER_MEYE_BASE + 1) -#define V4L2_CID_MEYE_FRAMERATE (V4L2_CID_USER_MEYE_BASE + 2) - -#endif diff --git a/linux-headers/include/linux/minix_fs.h b/linux-headers/include/linux/minix_fs.h index 95dbcb17eac..8d9ca8b2c35 100644 --- a/linux-headers/include/linux/minix_fs.h +++ b/linux-headers/include/linux/minix_fs.h @@ -97,11 +97,11 @@ struct minix3_super_block { struct minix_dir_entry { __u16 inode; - char name[0]; + char name[]; }; struct minix3_dir_entry { __u32 inode; - char name[0]; + char name[]; }; #endif diff --git a/linux-headers/include/linux/misc/bcm_vk.h b/linux-headers/include/linux/misc/bcm_vk.h new file mode 100644 index 00000000000..ec28e0bd46a --- /dev/null +++ b/linux-headers/include/linux/misc/bcm_vk.h @@ -0,0 +1,84 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Copyright 2018-2020 Broadcom. + */ + +#ifndef __UAPI_LINUX_MISC_BCM_VK_H +#define __UAPI_LINUX_MISC_BCM_VK_H + +#include +#include + +#define BCM_VK_MAX_FILENAME 64 + +struct vk_image { + __u32 type; /* Type of image */ +#define VK_IMAGE_TYPE_BOOT1 1 /* 1st stage (load to SRAM) */ +#define VK_IMAGE_TYPE_BOOT2 2 /* 2nd stage (load to DDR) */ + __u8 filename[BCM_VK_MAX_FILENAME]; /* Filename of image */ +}; + +struct vk_reset { + __u32 arg1; + __u32 arg2; +}; + +#define VK_MAGIC 0x5e + +/* Load image to Valkyrie */ +#define VK_IOCTL_LOAD_IMAGE _IOW(VK_MAGIC, 0x2, struct vk_image) + +/* Send Reset to Valkyrie */ +#define VK_IOCTL_RESET _IOW(VK_MAGIC, 0x4, struct vk_reset) + +/* + * Firmware Status accessed directly via BAR space + */ +#define VK_BAR_FWSTS 0x41c +#define VK_BAR_COP_FWSTS 0x428 +/* VK_FWSTS definitions */ +#define VK_FWSTS_RELOCATION_ENTRY (1UL << 0) +#define VK_FWSTS_RELOCATION_EXIT (1UL << 1) +#define VK_FWSTS_INIT_START (1UL << 2) +#define VK_FWSTS_ARCH_INIT_DONE (1UL << 3) +#define VK_FWSTS_PRE_KNL1_INIT_DONE (1UL << 4) +#define VK_FWSTS_PRE_KNL2_INIT_DONE (1UL << 5) +#define VK_FWSTS_POST_KNL_INIT_DONE (1UL << 6) +#define VK_FWSTS_INIT_DONE (1UL << 7) +#define VK_FWSTS_APP_INIT_START (1UL << 8) +#define VK_FWSTS_APP_INIT_DONE (1UL << 9) +#define VK_FWSTS_MASK 0xffffffff +#define VK_FWSTS_READY (VK_FWSTS_INIT_START | \ + VK_FWSTS_ARCH_INIT_DONE | \ + VK_FWSTS_PRE_KNL1_INIT_DONE | \ + VK_FWSTS_PRE_KNL2_INIT_DONE | \ + VK_FWSTS_POST_KNL_INIT_DONE | \ + VK_FWSTS_INIT_DONE | \ + VK_FWSTS_APP_INIT_START | \ + VK_FWSTS_APP_INIT_DONE) +/* Deinit */ +#define VK_FWSTS_APP_DEINIT_START (1UL << 23) +#define VK_FWSTS_APP_DEINIT_DONE (1UL << 24) +#define VK_FWSTS_DRV_DEINIT_START (1UL << 25) +#define VK_FWSTS_DRV_DEINIT_DONE (1UL << 26) +#define VK_FWSTS_RESET_DONE (1UL << 27) +#define VK_FWSTS_DEINIT_TRIGGERED (VK_FWSTS_APP_DEINIT_START | \ + VK_FWSTS_APP_DEINIT_DONE | \ + VK_FWSTS_DRV_DEINIT_START | \ + VK_FWSTS_DRV_DEINIT_DONE) +/* Last nibble for reboot reason */ +#define VK_FWSTS_RESET_REASON_SHIFT 28 +#define VK_FWSTS_RESET_REASON_MASK (0xf << VK_FWSTS_RESET_REASON_SHIFT) +#define VK_FWSTS_RESET_SYS_PWRUP (0x0 << VK_FWSTS_RESET_REASON_SHIFT) +#define VK_FWSTS_RESET_MBOX_DB (0x1 << VK_FWSTS_RESET_REASON_SHIFT) +#define VK_FWSTS_RESET_M7_WDOG (0x2 << VK_FWSTS_RESET_REASON_SHIFT) +#define VK_FWSTS_RESET_TEMP (0x3 << VK_FWSTS_RESET_REASON_SHIFT) +#define VK_FWSTS_RESET_PCI_FLR (0x4 << VK_FWSTS_RESET_REASON_SHIFT) +#define VK_FWSTS_RESET_PCI_HOT (0x5 << VK_FWSTS_RESET_REASON_SHIFT) +#define VK_FWSTS_RESET_PCI_WARM (0x6 << VK_FWSTS_RESET_REASON_SHIFT) +#define VK_FWSTS_RESET_PCI_COLD (0x7 << VK_FWSTS_RESET_REASON_SHIFT) +#define VK_FWSTS_RESET_L1 (0x8 << VK_FWSTS_RESET_REASON_SHIFT) +#define VK_FWSTS_RESET_L0 (0x9 << VK_FWSTS_RESET_REASON_SHIFT) +#define VK_FWSTS_RESET_UNKNOWN (0xf << VK_FWSTS_RESET_REASON_SHIFT) + +#endif /* __UAPI_LINUX_MISC_BCM_VK_H */ diff --git a/linux-headers/include/linux/mman.h b/linux-headers/include/linux/mman.h index 434986fbe30..4e8cb607805 100644 --- a/linux-headers/include/linux/mman.h +++ b/linux-headers/include/linux/mman.h @@ -4,6 +4,7 @@ #include #include +#include #define MREMAP_MAYMOVE 1 #define MREMAP_FIXED 2 @@ -41,4 +42,17 @@ #define MAP_HUGE_2GB HUGETLB_FLAG_ENCODE_2GB #define MAP_HUGE_16GB HUGETLB_FLAG_ENCODE_16GB +struct cachestat_range { + __u64 off; + __u64 len; +}; + +struct cachestat { + __u64 nr_cache; + __u64 nr_dirty; + __u64 nr_writeback; + __u64 nr_evicted; + __u64 nr_recently_evicted; +}; + #endif /* _LINUX_MMAN_H */ diff --git a/linux-headers/include/linux/mmc/ioctl.h b/linux-headers/include/linux/mmc/ioctl.h index 27a39847d55..e7401ade682 100644 --- a/linux-headers/include/linux/mmc/ioctl.h +++ b/linux-headers/include/linux/mmc/ioctl.h @@ -58,7 +58,7 @@ struct mmc_ioc_cmd { */ struct mmc_ioc_multi_cmd { __u64 num_of_cmds; - struct mmc_ioc_cmd cmds[0]; + struct mmc_ioc_cmd cmds[]; }; #define MMC_IOC_CMD _IOWR(MMC_BLOCK_MAJOR, 0, struct mmc_ioc_cmd) diff --git a/linux-headers/include/linux/module.h b/linux-headers/include/linux/module.h index f33fa47fd6f..10b94ca9059 100644 --- a/linux-headers/include/linux/module.h +++ b/linux-headers/include/linux/module.h @@ -5,5 +5,6 @@ /* Flags for sys_finit_module: */ #define MODULE_INIT_IGNORE_MODVERSIONS 1 #define MODULE_INIT_IGNORE_VERMAGIC 2 +#define MODULE_INIT_COMPRESSED_FILE 4 #endif /* _LINUX_MODULE_H */ diff --git a/linux-headers/include/linux/mount.h b/linux-headers/include/linux/mount.h index 13247dafe2a..12e85706bad 100644 --- a/linux-headers/include/linux/mount.h +++ b/linux-headers/include/linux/mount.h @@ -1,6 +1,8 @@ #ifndef _LINUX_MOUNT_H #define _LINUX_MOUNT_H +#include + /* * These are the fs-independent mount-flags: up to 32 flags are supported * @@ -71,7 +73,9 @@ #define MOVE_MOUNT_T_SYMLINKS 0x00000010 /* Follow symlinks on to path */ #define MOVE_MOUNT_T_AUTOMOUNTS 0x00000020 /* Follow automounts on to path */ #define MOVE_MOUNT_T_EMPTY_PATH 0x00000040 /* Empty to path permitted */ -#define MOVE_MOUNT__MASK 0x00000077 +#define MOVE_MOUNT_SET_GROUP 0x00000100 /* Set sharing group instead */ +#define MOVE_MOUNT_BENEATH 0x00000200 /* Mount beneath top mount */ +#define MOVE_MOUNT__MASK 0x00000377 /* * fsopen() flags. @@ -96,8 +100,9 @@ enum fsconfig_command { FSCONFIG_SET_PATH = 3, /* Set parameter, supplying an object by path */ FSCONFIG_SET_PATH_EMPTY = 4, /* Set parameter, supplying an object by (empty) path */ FSCONFIG_SET_FD = 5, /* Set parameter, supplying an object by fd */ - FSCONFIG_CMD_CREATE = 6, /* Invoke superblock creation */ + FSCONFIG_CMD_CREATE = 6, /* Create new or reuse existing superblock */ FSCONFIG_CMD_RECONFIGURE = 7, /* Invoke superblock reconfiguration */ + FSCONFIG_CMD_CREATE_EXCL = 8, /* Create new superblock, fail if reusing existing superblock */ }; /* @@ -117,5 +122,20 @@ enum fsconfig_command { #define MOUNT_ATTR_NOATIME 0x00000010 /* - Do not update access times. */ #define MOUNT_ATTR_STRICTATIME 0x00000020 /* - Always perform atime updates */ #define MOUNT_ATTR_NODIRATIME 0x00000080 /* Do not update directory access times */ +#define MOUNT_ATTR_IDMAP 0x00100000 /* Idmap mount to @userns_fd in struct mount_attr. */ +#define MOUNT_ATTR_NOSYMFOLLOW 0x00200000 /* Do not follow symlinks */ + +/* + * mount_setattr() + */ +struct mount_attr { + __u64 attr_set; + __u64 attr_clr; + __u64 propagation; + __u64 userns_fd; +}; + +/* List of all mount_attr versions. */ +#define MOUNT_ATTR_SIZE_VER0 32 /* sizeof first published struct */ #endif /* _LINUX_MOUNT_H */ diff --git a/linux-headers/include/linux/mptcp.h b/linux-headers/include/linux/mptcp.h index 32181230771..159d32f04cd 100644 --- a/linux-headers/include/linux/mptcp.h +++ b/linux-headers/include/linux/mptcp.h @@ -2,8 +2,14 @@ #ifndef _MPTCP_H #define _MPTCP_H +#include /* for sockaddr_in and sockaddr_in6 */ +#include /* for struct sockaddr */ + #include #include +#include /* for sockaddr_in */ +#include /* for sockaddr_in6 */ +#include /* for sockaddr_storage and sa_family */ #define MPTCP_SUBFLOW_FLAG_MCAP_REM _BITUL(0) #define MPTCP_SUBFLOW_FLAG_MCAP_LOC _BITUL(1) @@ -36,6 +42,7 @@ enum { /* netlink interface */ #define MPTCP_PM_NAME "mptcp_pm" #define MPTCP_PM_CMD_GRP_NAME "mptcp_pm_cmds" +#define MPTCP_PM_EV_GRP_NAME "mptcp_pm_events" #define MPTCP_PM_VER 0x1 /* @@ -47,6 +54,9 @@ enum { MPTCP_PM_ATTR_ADDR, /* nested address */ MPTCP_PM_ATTR_RCV_ADD_ADDRS, /* u32 */ MPTCP_PM_ATTR_SUBFLOWS, /* u32 */ + MPTCP_PM_ATTR_TOKEN, /* u32 */ + MPTCP_PM_ATTR_LOC_ID, /* u8 */ + MPTCP_PM_ATTR_ADDR_REMOTE, /* nested address */ __MPTCP_PM_ATTR_MAX }; @@ -72,6 +82,8 @@ enum { #define MPTCP_PM_ADDR_FLAG_SIGNAL (1 << 0) #define MPTCP_PM_ADDR_FLAG_SUBFLOW (1 << 1) #define MPTCP_PM_ADDR_FLAG_BACKUP (1 << 2) +#define MPTCP_PM_ADDR_FLAG_FULLMESH (1 << 3) +#define MPTCP_PM_ADDR_FLAG_IMPLICIT (1 << 4) enum { MPTCP_PM_CMD_UNSPEC, @@ -82,6 +94,11 @@ enum { MPTCP_PM_CMD_FLUSH_ADDRS, MPTCP_PM_CMD_SET_LIMITS, MPTCP_PM_CMD_GET_LIMITS, + MPTCP_PM_CMD_SET_FLAGS, + MPTCP_PM_CMD_ANNOUNCE, + MPTCP_PM_CMD_REMOVE, + MPTCP_PM_CMD_SUBFLOW_CREATE, + MPTCP_PM_CMD_SUBFLOW_DESTROY, __MPTCP_PM_CMD_AFTER_LAST }; @@ -101,6 +118,162 @@ struct mptcp_info { __u64 mptcpi_write_seq; __u64 mptcpi_snd_una; __u64 mptcpi_rcv_nxt; + __u8 mptcpi_local_addr_used; + __u8 mptcpi_local_addr_max; + __u8 mptcpi_csum_enabled; + __u32 mptcpi_retransmits; + __u64 mptcpi_bytes_retrans; + __u64 mptcpi_bytes_sent; + __u64 mptcpi_bytes_received; + __u64 mptcpi_bytes_acked; +}; + +/* + * MPTCP_EVENT_CREATED: token, family, saddr4 | saddr6, daddr4 | daddr6, + * sport, dport + * A new MPTCP connection has been created. It is the good time to allocate + * memory and send ADD_ADDR if needed. Depending on the traffic-patterns + * it can take a long time until the MPTCP_EVENT_ESTABLISHED is sent. + * + * MPTCP_EVENT_ESTABLISHED: token, family, saddr4 | saddr6, daddr4 | daddr6, + * sport, dport + * A MPTCP connection is established (can start new subflows). + * + * MPTCP_EVENT_CLOSED: token + * A MPTCP connection has stopped. + * + * MPTCP_EVENT_ANNOUNCED: token, rem_id, family, daddr4 | daddr6 [, dport] + * A new address has been announced by the peer. + * + * MPTCP_EVENT_REMOVED: token, rem_id + * An address has been lost by the peer. + * + * MPTCP_EVENT_SUB_ESTABLISHED: token, family, loc_id, rem_id, + * saddr4 | saddr6, daddr4 | daddr6, sport, + * dport, backup, if_idx [, error] + * A new subflow has been established. 'error' should not be set. + * + * MPTCP_EVENT_SUB_CLOSED: token, family, loc_id, rem_id, saddr4 | saddr6, + * daddr4 | daddr6, sport, dport, backup, if_idx + * [, error] + * A subflow has been closed. An error (copy of sk_err) could be set if an + * error has been detected for this subflow. + * + * MPTCP_EVENT_SUB_PRIORITY: token, family, loc_id, rem_id, saddr4 | saddr6, + * daddr4 | daddr6, sport, dport, backup, if_idx + * [, error] + * The priority of a subflow has changed. 'error' should not be set. + * + * MPTCP_EVENT_LISTENER_CREATED: family, sport, saddr4 | saddr6 + * A new PM listener is created. + * + * MPTCP_EVENT_LISTENER_CLOSED: family, sport, saddr4 | saddr6 + * A PM listener is closed. + */ +enum mptcp_event_type { + MPTCP_EVENT_UNSPEC = 0, + MPTCP_EVENT_CREATED = 1, + MPTCP_EVENT_ESTABLISHED = 2, + MPTCP_EVENT_CLOSED = 3, + + MPTCP_EVENT_ANNOUNCED = 6, + MPTCP_EVENT_REMOVED = 7, + + MPTCP_EVENT_SUB_ESTABLISHED = 10, + MPTCP_EVENT_SUB_CLOSED = 11, + + MPTCP_EVENT_SUB_PRIORITY = 13, + + MPTCP_EVENT_LISTENER_CREATED = 15, + MPTCP_EVENT_LISTENER_CLOSED = 16, }; +enum mptcp_event_attr { + MPTCP_ATTR_UNSPEC = 0, + + MPTCP_ATTR_TOKEN, /* u32 */ + MPTCP_ATTR_FAMILY, /* u16 */ + MPTCP_ATTR_LOC_ID, /* u8 */ + MPTCP_ATTR_REM_ID, /* u8 */ + MPTCP_ATTR_SADDR4, /* be32 */ + MPTCP_ATTR_SADDR6, /* struct in6_addr */ + MPTCP_ATTR_DADDR4, /* be32 */ + MPTCP_ATTR_DADDR6, /* struct in6_addr */ + MPTCP_ATTR_SPORT, /* be16 */ + MPTCP_ATTR_DPORT, /* be16 */ + MPTCP_ATTR_BACKUP, /* u8 */ + MPTCP_ATTR_ERROR, /* u8 */ + MPTCP_ATTR_FLAGS, /* u16 */ + MPTCP_ATTR_TIMEOUT, /* u32 */ + MPTCP_ATTR_IF_IDX, /* s32 */ + MPTCP_ATTR_RESET_REASON,/* u32 */ + MPTCP_ATTR_RESET_FLAGS, /* u32 */ + MPTCP_ATTR_SERVER_SIDE, /* u8 */ + + __MPTCP_ATTR_AFTER_LAST +}; + +#define MPTCP_ATTR_MAX (__MPTCP_ATTR_AFTER_LAST - 1) + +/* MPTCP Reset reason codes, rfc8684 */ +#define MPTCP_RST_EUNSPEC 0 +#define MPTCP_RST_EMPTCP 1 +#define MPTCP_RST_ERESOURCE 2 +#define MPTCP_RST_EPROHIBIT 3 +#define MPTCP_RST_EWQ2BIG 4 +#define MPTCP_RST_EBADPERF 5 +#define MPTCP_RST_EMIDDLEBOX 6 + +struct mptcp_subflow_data { + __u32 size_subflow_data; /* size of this structure in userspace */ + __u32 num_subflows; /* must be 0, set by kernel */ + __u32 size_kernel; /* must be 0, set by kernel */ + __u32 size_user; /* size of one element in data[] */ +} __attribute__((aligned(8))); + +struct mptcp_subflow_addrs { + union { + __kernel_sa_family_t sa_family; + struct sockaddr sa_local; + struct sockaddr_in sin_local; + struct sockaddr_in6 sin6_local; + struct __kernel_sockaddr_storage ss_local; + }; + union { + struct sockaddr sa_remote; + struct sockaddr_in sin_remote; + struct sockaddr_in6 sin6_remote; + struct __kernel_sockaddr_storage ss_remote; + }; +}; + +struct mptcp_subflow_info { + __u32 id; + struct mptcp_subflow_addrs addrs; +}; + +struct mptcp_full_info { + __u32 size_tcpinfo_kernel; /* must be 0, set by kernel */ + __u32 size_tcpinfo_user; + __u32 size_sfinfo_kernel; /* must be 0, set by kernel */ + __u32 size_sfinfo_user; + __u32 num_subflows; /* must be 0, set by kernel (real subflow count) */ + __u32 size_arrays_user; /* max subflows that userspace is interested in; + * the buffers at subflow_info/tcp_info + * are respectively at least: + * size_arrays * size_sfinfo_user + * size_arrays * size_tcpinfo_user + * bytes wide + */ + __aligned_u64 subflow_info; + __aligned_u64 tcp_info; + struct mptcp_info mptcp_info; +}; + +/* MPTCP socket options */ +#define MPTCP_INFO 1 +#define MPTCP_TCPINFO 2 +#define MPTCP_SUBFLOW_ADDRS 3 +#define MPTCP_FULL_INFO 4 + #endif /* _MPTCP_H */ diff --git a/linux-headers/include/linux/mroute6.h b/linux-headers/include/linux/mroute6.h index 2c13150412b..ff5b2d58967 100644 --- a/linux-headers/include/linux/mroute6.h +++ b/linux-headers/include/linux/mroute6.h @@ -134,6 +134,7 @@ struct mrt6msg { #define MRT6MSG_NOCACHE 1 #define MRT6MSG_WRONGMIF 2 #define MRT6MSG_WHOLEPKT 3 /* used for use level encap */ +#define MRT6MSG_WRMIFWHOLE 4 /* For PIM Register and assert processing */ __u8 im6_mbz; /* must be zero */ __u8 im6_msgtype; /* what type of message */ __u16 im6_mif; /* mif rec'd on */ diff --git a/linux-headers/include/linux/mrp_bridge.h b/linux-headers/include/linux/mrp_bridge.h index cae9bef6acd..a578d59dfe9 100644 --- a/linux-headers/include/linux/mrp_bridge.h +++ b/linux-headers/include/linux/mrp_bridge.h @@ -61,6 +61,7 @@ enum br_mrp_tlv_header_type { BR_MRP_TLV_HEADER_IN_TOPO = 0x7, BR_MRP_TLV_HEADER_IN_LINK_DOWN = 0x8, BR_MRP_TLV_HEADER_IN_LINK_UP = 0x9, + BR_MRP_TLV_HEADER_IN_LINK_STATUS = 0xa, BR_MRP_TLV_HEADER_OPTION = 0x7f, }; @@ -70,90 +71,4 @@ enum br_mrp_sub_tlv_header_type { BR_MRP_SUB_TLV_HEADER_TEST_AUTO_MGR = 0x3, }; -struct br_mrp_tlv_hdr { - __u8 type; - __u8 length; -}; - -struct br_mrp_sub_tlv_hdr { - __u8 type; - __u8 length; -}; - -struct br_mrp_end_hdr { - struct br_mrp_tlv_hdr hdr; -}; - -struct br_mrp_common_hdr { - __be16 seq_id; - __u8 domain[MRP_DOMAIN_UUID_LENGTH]; -}; - -struct br_mrp_ring_test_hdr { - __be16 prio; - __u8 sa[ETH_ALEN]; - __be16 port_role; - __be16 state; - __be16 transitions; - __be32 timestamp; -}; - -struct br_mrp_ring_topo_hdr { - __be16 prio; - __u8 sa[ETH_ALEN]; - __be16 interval; -}; - -struct br_mrp_ring_link_hdr { - __u8 sa[ETH_ALEN]; - __be16 port_role; - __be16 interval; - __be16 blocked; -}; - -struct br_mrp_sub_opt_hdr { - __u8 type; - __u8 manufacture_data[MRP_MANUFACTURE_DATA_LENGTH]; -}; - -struct br_mrp_test_mgr_nack_hdr { - __be16 prio; - __u8 sa[ETH_ALEN]; - __be16 other_prio; - __u8 other_sa[ETH_ALEN]; -}; - -struct br_mrp_test_prop_hdr { - __be16 prio; - __u8 sa[ETH_ALEN]; - __be16 other_prio; - __u8 other_sa[ETH_ALEN]; -}; - -struct br_mrp_oui_hdr { - __u8 oui[MRP_OUI_LENGTH]; -}; - -struct br_mrp_in_test_hdr { - __be16 id; - __u8 sa[ETH_ALEN]; - __be16 port_role; - __be16 state; - __be16 transitions; - __be32 timestamp; -}; - -struct br_mrp_in_topo_hdr { - __u8 sa[ETH_ALEN]; - __be16 id; - __be16 interval; -}; - -struct br_mrp_in_link_hdr { - __u8 sa[ETH_ALEN]; - __be16 port_role; - __be16 id; - __be16 interval; -}; - #endif diff --git a/linux-headers/include/linux/n_r3964.h b/linux-headers/include/linux/n_r3964.h deleted file mode 100644 index 5e467e0d078..00000000000 --- a/linux-headers/include/linux/n_r3964.h +++ /dev/null @@ -1,99 +0,0 @@ -/* SPDX-License-Identifier: GPL-1.0+ WITH Linux-syscall-note */ -/* r3964 linediscipline for linux - * - * ----------------------------------------------------------- - * Copyright by - * Philips Automation Projects - * Kassel (Germany) - * ----------------------------------------------------------- - * This software may be used and distributed according to the terms of - * the GNU General Public License, incorporated herein by reference. - * - * Author: - * L. Haag - * - * $Log: r3964.h,v $ - * Revision 1.4 2005/12/21 19:54:24 Kurt Huwig - * Fixed HZ usage on 2.6 kernels - * Removed unnecessary include - * - * Revision 1.3 2001/03/18 13:02:24 dwmw2 - * Fix timer usage, use spinlocks properly. - * - * Revision 1.2 2001/03/18 12:53:15 dwmw2 - * Merge changes in 2.4.2 - * - * Revision 1.1.1.1 1998/10/13 16:43:14 dwmw2 - * This'll screw the version control - * - * Revision 1.6 1998/09/30 00:40:38 dwmw2 - * Updated to use kernel's N_R3964 if available - * - * Revision 1.4 1998/04/02 20:29:44 lhaag - * select, blocking, ... - * - * Revision 1.3 1998/02/12 18:58:43 root - * fixed some memory leaks - * calculation of checksum characters - * - * Revision 1.2 1998/02/07 13:03:17 root - * ioctl read_telegram - * - * Revision 1.1 1998/02/06 19:19:43 root - * Initial revision - * - * - */ - -#ifndef __LINUX_N_R3964_H__ -#define __LINUX_N_R3964_H__ - -/* line disciplines for r3964 protocol */ - - -/* - * Ioctl-commands - */ - -#define R3964_ENABLE_SIGNALS 0x5301 -#define R3964_SETPRIORITY 0x5302 -#define R3964_USE_BCC 0x5303 -#define R3964_READ_TELEGRAM 0x5304 - -/* Options for R3964_SETPRIORITY */ -#define R3964_MASTER 0 -#define R3964_SLAVE 1 - -/* Options for R3964_ENABLE_SIGNALS */ -#define R3964_SIG_ACK 0x0001 -#define R3964_SIG_DATA 0x0002 -#define R3964_SIG_ALL 0x000f -#define R3964_SIG_NONE 0x0000 -#define R3964_USE_SIGIO 0x1000 - -/* - * r3964 operation states: - */ - -/* types for msg_id: */ -enum {R3964_MSG_ACK=1, R3964_MSG_DATA }; - -#define R3964_MAX_MSG_COUNT 32 - -/* error codes for client messages */ -#define R3964_OK 0 /* no error. */ -#define R3964_TX_FAIL -1 /* transmission error, block NOT sent */ -#define R3964_OVERFLOW -2 /* msg queue overflow */ - -/* the client gets this struct when calling read(fd,...): */ -struct r3964_client_message { - int msg_id; - int arg; - int error_code; -}; - -#define R3964_MTU 256 - - - -#endif /* __LINUX_N_R3964_H__ */ diff --git a/linux-headers/include/linux/nbd-netlink.h b/linux-headers/include/linux/nbd-netlink.h index e730c2dfe9d..6d700b00f82 100644 --- a/linux-headers/include/linux/nbd-netlink.h +++ b/linux-headers/include/linux/nbd-netlink.h @@ -35,6 +35,7 @@ enum { NBD_ATTR_SOCKETS, NBD_ATTR_DEAD_CONN_TIMEOUT, NBD_ATTR_DEVICE_LIST, + NBD_ATTR_BACKEND_IDENTIFIER, __NBD_ATTR_MAX, }; #define NBD_ATTR_MAX (__NBD_ATTR_MAX - 1) diff --git a/linux-headers/include/linux/nbd.h b/linux-headers/include/linux/nbd.h index f4eed87b120..dc6cb17c8c4 100644 --- a/linux-headers/include/linux/nbd.h +++ b/linux-headers/include/linux/nbd.h @@ -11,6 +11,8 @@ * Cleanup PARANOIA usage & code. * 2004/02/19 Paul Clements * Removed PARANOIA, plus various cleanup and comments + * 2023 Copyright Red Hat + * Link to userspace extensions, favor cookie over handle. */ #ifndef LINUX_NBD_H @@ -30,12 +32,18 @@ #define NBD_SET_TIMEOUT _IO( 0xab, 9 ) #define NBD_SET_FLAGS _IO( 0xab, 10) +/* + * See also https://github.com/NetworkBlockDevice/nbd/blob/master/doc/proto.md + * for additional userspace extensions not yet utilized in the kernel module. + */ + enum { NBD_CMD_READ = 0, NBD_CMD_WRITE = 1, NBD_CMD_DISC = 2, NBD_CMD_FLUSH = 3, NBD_CMD_TRIM = 4 + /* userspace defines additional extension commands */ }; /* values for flags field, these are server interaction specific. */ @@ -64,15 +72,19 @@ enum { #define NBD_REQUEST_MAGIC 0x25609513 #define NBD_REPLY_MAGIC 0x67446698 /* Do *not* use magics: 0x12560953 0x96744668. */ +/* magic 0x668e33ef for structured reply not supported by kernel yet */ /* * This is the packet used for communication between client and * server. All data are in network byte order. */ struct nbd_request { - __be32 magic; - __be32 type; /* == READ || == WRITE */ - char handle[8]; + __be32 magic; /* NBD_REQUEST_MAGIC */ + __be32 type; /* See NBD_CMD_* */ + union { + __be64 cookie; /* Opaque identifier for request */ + char handle[8]; /* older spelling of cookie */ + }; __be64 from; __be32 len; } __attribute__((packed)); @@ -82,8 +94,11 @@ struct nbd_request { * it has completed an I/O request (or an error occurs). */ struct nbd_reply { - __be32 magic; + __be32 magic; /* NBD_REPLY_MAGIC */ __be32 error; /* 0 = ok, else error */ - char handle[8]; /* handle you got from request */ + union { + __be64 cookie; /* Opaque identifier from request */ + char handle[8]; /* older spelling of cookie */ + }; }; #endif /* LINUX_NBD_H */ diff --git a/linux-headers/include/linux/ndctl.h b/linux-headers/include/linux/ndctl.h index 89221574183..6e7b9264d6f 100644 --- a/linux-headers/include/linux/ndctl.h +++ b/linux-headers/include/linux/ndctl.h @@ -30,25 +30,25 @@ struct nd_cmd_get_config_data_hdr { __u32 in_offset; __u32 in_length; __u32 status; - __u8 out_buf[0]; + __u8 out_buf[]; } __attribute__((packed)); struct nd_cmd_set_config_hdr { __u32 in_offset; __u32 in_length; - __u8 in_buf[0]; + __u8 in_buf[]; } __attribute__((packed)); struct nd_cmd_vendor_hdr { __u32 opcode; __u32 in_length; - __u8 in_buf[0]; + __u8 in_buf[]; } __attribute__((packed)); struct nd_cmd_vendor_tail { __u32 status; __u32 out_length; - __u8 out_buf[0]; + __u8 out_buf[]; } __attribute__((packed)); struct nd_cmd_ars_cap { @@ -86,7 +86,7 @@ struct nd_cmd_ars_status { __u32 reserved; __u64 err_address; __u64 length; - } __attribute__((packed)) records[0]; + } __attribute__((packed)) records[]; } __attribute__((packed)); struct nd_cmd_clear_error { @@ -189,7 +189,6 @@ static __inline__ const char *nvdimm_cmd_name(unsigned cmd) #define ND_DEVICE_REGION_BLK 3 /* nd_region: (parent of BLK namespaces) */ #define ND_DEVICE_NAMESPACE_IO 4 /* legacy persistent memory */ #define ND_DEVICE_NAMESPACE_PMEM 5 /* PMEM namespace (may alias with BLK) */ -#define ND_DEVICE_NAMESPACE_BLK 6 /* BLK namespace (may alias with PMEM) */ #define ND_DEVICE_DAX_PMEM 7 /* Device DAX interface to pmem */ enum nd_driver_flags { @@ -198,7 +197,6 @@ enum nd_driver_flags { ND_DRIVER_REGION_BLK = 1 << ND_DEVICE_REGION_BLK, ND_DRIVER_NAMESPACE_IO = 1 << ND_DEVICE_NAMESPACE_IO, ND_DRIVER_NAMESPACE_PMEM = 1 << ND_DEVICE_NAMESPACE_PMEM, - ND_DRIVER_NAMESPACE_BLK = 1 << ND_DEVICE_NAMESPACE_BLK, ND_DRIVER_DAX_PMEM = 1 << ND_DEVICE_DAX_PMEM, }; diff --git a/linux-headers/include/linux/neighbour.h b/linux-headers/include/linux/neighbour.h index dc8b72201f6..5e67a7eaf4a 100644 --- a/linux-headers/include/linux/neighbour.h +++ b/linux-headers/include/linux/neighbour.h @@ -31,6 +31,9 @@ enum { NDA_PROTOCOL, /* Originator of entry */ NDA_NH_ID, NDA_FDB_EXT_ATTRS, + NDA_FLAGS_EXT, + NDA_NDM_STATE_MASK, + NDA_NDM_FLAGS_MASK, __NDA_MAX }; @@ -40,14 +43,17 @@ enum { * Neighbor Cache Entry Flags */ -#define NTF_USE 0x01 -#define NTF_SELF 0x02 -#define NTF_MASTER 0x04 -#define NTF_PROXY 0x08 /* == ATF_PUBL */ -#define NTF_EXT_LEARNED 0x10 -#define NTF_OFFLOADED 0x20 -#define NTF_STICKY 0x40 -#define NTF_ROUTER 0x80 +#define NTF_USE (1 << 0) +#define NTF_SELF (1 << 1) +#define NTF_MASTER (1 << 2) +#define NTF_PROXY (1 << 3) /* == ATF_PUBL */ +#define NTF_EXT_LEARNED (1 << 4) +#define NTF_OFFLOADED (1 << 5) +#define NTF_STICKY (1 << 6) +#define NTF_ROUTER (1 << 7) +/* Extended flags under NDA_FLAGS_EXT: */ +#define NTF_EXT_MANAGED (1 << 0) +#define NTF_EXT_LOCKED (1 << 1) /* * Neighbor Cache Entry States. @@ -65,9 +71,27 @@ enum { #define NUD_PERMANENT 0x80 #define NUD_NONE 0x00 -/* NUD_NOARP & NUD_PERMANENT are pseudostates, they never change - and make no address resolution or NUD. - NUD_PERMANENT also cannot be deleted by garbage collectors. +/* NUD_NOARP & NUD_PERMANENT are pseudostates, they never change and make no + * address resolution or NUD. + * + * NUD_PERMANENT also cannot be deleted by garbage collectors. This holds true + * for dynamic entries with NTF_EXT_LEARNED flag as well. However, upon carrier + * down event, NUD_PERMANENT entries are not flushed whereas NTF_EXT_LEARNED + * flagged entries explicitly are (which is also consistent with the routing + * subsystem). + * + * When NTF_EXT_LEARNED is set for a bridge fdb entry the different cache entry + * states don't make sense and thus are ignored. Such entries don't age and + * can roam. + * + * NTF_EXT_MANAGED flagged neigbor entries are managed by the kernel on behalf + * of a user space control plane, and automatically refreshed so that (if + * possible) they remain in NUD_REACHABLE state. + * + * NTF_EXT_LOCKED flagged bridge FDB entries are entries generated by the + * bridge in response to a host trying to communicate via a locked bridge port + * with MAB enabled. Their purpose is to notify user space that a host requires + * authentication. */ struct nda_cacheinfo { @@ -136,6 +160,7 @@ enum { NDTPA_QUEUE_LENBYTES, /* u32 */ NDTPA_MCAST_REPROBES, /* u32 */ NDTPA_PAD, + NDTPA_INTERVAL_PROBE_TIME_MS, /* u64, msecs */ __NDTPA_MAX }; #define NDTPA_MAX (__NDTPA_MAX - 1) diff --git a/linux-headers/include/linux/net_dropmon.h b/linux-headers/include/linux/net_dropmon.h index 66048cc5d7b..84f622a66a7 100644 --- a/linux-headers/include/linux/net_dropmon.h +++ b/linux-headers/include/linux/net_dropmon.h @@ -29,12 +29,12 @@ struct net_dm_config_entry { struct net_dm_config_msg { __u32 entries; - struct net_dm_config_entry options[0]; + struct net_dm_config_entry options[]; }; struct net_dm_alert_msg { __u32 entries; - struct net_dm_drop_point points[0]; + struct net_dm_drop_point points[]; }; struct net_dm_user_msg { @@ -93,6 +93,7 @@ enum net_dm_attr { NET_DM_ATTR_SW_DROPS, /* flag */ NET_DM_ATTR_HW_DROPS, /* flag */ NET_DM_ATTR_FLOW_ACTION_COOKIE, /* binary */ + NET_DM_ATTR_REASON, /* string */ __NET_DM_ATTR_MAX, NET_DM_ATTR_MAX = __NET_DM_ATTR_MAX - 1 diff --git a/linux-headers/include/linux/net_tstamp.h b/linux-headers/include/linux/net_tstamp.h index 7ed0b3d1c00..a2c66b3d7f0 100644 --- a/linux-headers/include/linux/net_tstamp.h +++ b/linux-headers/include/linux/net_tstamp.h @@ -13,7 +13,7 @@ #include #include /* for SO_TIMESTAMPING */ -/* SO_TIMESTAMPING gets an integer bit field comprised of these values */ +/* SO_TIMESTAMPING flags */ enum { SOF_TIMESTAMPING_TX_HARDWARE = (1<<0), SOF_TIMESTAMPING_TX_SOFTWARE = (1<<1), @@ -30,8 +30,10 @@ enum { SOF_TIMESTAMPING_OPT_STATS = (1<<12), SOF_TIMESTAMPING_OPT_PKTINFO = (1<<13), SOF_TIMESTAMPING_OPT_TX_SWHW = (1<<14), + SOF_TIMESTAMPING_BIND_PHC = (1 << 15), + SOF_TIMESTAMPING_OPT_ID_TCP = (1 << 16), - SOF_TIMESTAMPING_LAST = SOF_TIMESTAMPING_OPT_TX_SWHW, + SOF_TIMESTAMPING_LAST = SOF_TIMESTAMPING_OPT_ID_TCP, SOF_TIMESTAMPING_MASK = (SOF_TIMESTAMPING_LAST - 1) | SOF_TIMESTAMPING_LAST }; @@ -46,10 +48,22 @@ enum { SOF_TIMESTAMPING_TX_SCHED | \ SOF_TIMESTAMPING_TX_ACK) +/** + * struct so_timestamping - SO_TIMESTAMPING parameter + * + * @flags: SO_TIMESTAMPING flags + * @bind_phc: Index of PTP virtual clock bound to sock. This is available + * if flag SOF_TIMESTAMPING_BIND_PHC is set. + */ +struct so_timestamping { + int flags; + int bind_phc; +}; + /** * struct hwtstamp_config - %SIOCGHWTSTAMP and %SIOCSHWTSTAMP parameter * - * @flags: no flags defined right now, must be zero for %SIOCSHWTSTAMP + * @flags: one of HWTSTAMP_FLAG_* * @tx_type: one of HWTSTAMP_TX_* * @rx_filter: one of HWTSTAMP_FILTER_* * @@ -65,6 +79,21 @@ struct hwtstamp_config { int rx_filter; }; +/* possible values for hwtstamp_config->flags */ +enum hwtstamp_flags { + /* + * With this flag, the user could get bond active interface's + * PHC index. Note this PHC index is not stable as when there + * is a failover, the bond active interface will be changed, so + * will be the PHC index. + */ + HWTSTAMP_FLAG_BONDED_PHC_INDEX = (1<<0), +#define HWTSTAMP_FLAG_BONDED_PHC_INDEX HWTSTAMP_FLAG_BONDED_PHC_INDEX + + HWTSTAMP_FLAG_LAST = HWTSTAMP_FLAG_BONDED_PHC_INDEX, + HWTSTAMP_FLAG_MASK = (HWTSTAMP_FLAG_LAST - 1) | HWTSTAMP_FLAG_LAST +}; + /* possible values for hwtstamp_config->tx_type */ enum hwtstamp_tx_types { /* diff --git a/linux-headers/include/linux/netdev.h b/linux-headers/include/linux/netdev.h new file mode 100644 index 00000000000..e94668bd586 --- /dev/null +++ b/linux-headers/include/linux/netdev.h @@ -0,0 +1,63 @@ +/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */ +/* Do not edit directly, auto-generated from: */ +/* Documentation/netlink/specs/netdev.yaml */ +/* YNL-GEN uapi header */ + +#ifndef _LINUX_NETDEV_H +#define _LINUX_NETDEV_H + +#define NETDEV_FAMILY_NAME "netdev" +#define NETDEV_FAMILY_VERSION 1 + +/** + * enum netdev_xdp_act + * @NETDEV_XDP_ACT_BASIC: XDP features set supported by all drivers + * (XDP_ABORTED, XDP_DROP, XDP_PASS, XDP_TX) + * @NETDEV_XDP_ACT_REDIRECT: The netdev supports XDP_REDIRECT + * @NETDEV_XDP_ACT_NDO_XMIT: This feature informs if netdev implements + * ndo_xdp_xmit callback. + * @NETDEV_XDP_ACT_XSK_ZEROCOPY: This feature informs if netdev supports AF_XDP + * in zero copy mode. + * @NETDEV_XDP_ACT_HW_OFFLOAD: This feature informs if netdev supports XDP hw + * offloading. + * @NETDEV_XDP_ACT_RX_SG: This feature informs if netdev implements non-linear + * XDP buffer support in the driver napi callback. + * @NETDEV_XDP_ACT_NDO_XMIT_SG: This feature informs if netdev implements + * non-linear XDP buffer support in ndo_xdp_xmit callback. + */ +enum netdev_xdp_act { + NETDEV_XDP_ACT_BASIC = 1, + NETDEV_XDP_ACT_REDIRECT = 2, + NETDEV_XDP_ACT_NDO_XMIT = 4, + NETDEV_XDP_ACT_XSK_ZEROCOPY = 8, + NETDEV_XDP_ACT_HW_OFFLOAD = 16, + NETDEV_XDP_ACT_RX_SG = 32, + NETDEV_XDP_ACT_NDO_XMIT_SG = 64, + + /* private: */ + NETDEV_XDP_ACT_MASK = 127, +}; + +enum { + NETDEV_A_DEV_IFINDEX = 1, + NETDEV_A_DEV_PAD, + NETDEV_A_DEV_XDP_FEATURES, + NETDEV_A_DEV_XDP_ZC_MAX_SEGS, + + __NETDEV_A_DEV_MAX, + NETDEV_A_DEV_MAX = (__NETDEV_A_DEV_MAX - 1) +}; + +enum { + NETDEV_CMD_DEV_GET = 1, + NETDEV_CMD_DEV_ADD_NTF, + NETDEV_CMD_DEV_DEL_NTF, + NETDEV_CMD_DEV_CHANGE_NTF, + + __NETDEV_CMD_MAX, + NETDEV_CMD_MAX = (__NETDEV_CMD_MAX - 1) +}; + +#define NETDEV_MCGRP_MGMT "mgmt" + +#endif /* _LINUX_NETDEV_H */ diff --git a/linux-headers/include/linux/netfilter.h b/linux-headers/include/linux/netfilter.h index 566d8e40df0..30c045b818b 100644 --- a/linux-headers/include/linux/netfilter.h +++ b/linux-headers/include/linux/netfilter.h @@ -49,6 +49,7 @@ enum nf_inet_hooks { enum nf_dev_hooks { NF_NETDEV_INGRESS, + NF_NETDEV_EGRESS, NF_NETDEV_NUMHOOKS }; diff --git a/linux-headers/include/linux/netfilter/ipset/ip_set.h b/linux-headers/include/linux/netfilter/ipset/ip_set.h index 4b372f46f0d..f9725c3611e 100644 --- a/linux-headers/include/linux/netfilter/ipset/ip_set.h +++ b/linux-headers/include/linux/netfilter/ipset/ip_set.h @@ -3,10 +3,6 @@ * Patrick Schaaf * Martin Josefsson * Copyright (C) 2003-2011 Jozsef Kadlecsik - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _IP_SET_H #define _IP_SET_H @@ -89,14 +85,15 @@ enum { IPSET_ATTR_CADT_LINENO = IPSET_ATTR_LINENO, /* 9 */ IPSET_ATTR_MARK, /* 10 */ IPSET_ATTR_MARKMASK, /* 11 */ + IPSET_ATTR_BITMASK, /* 12 */ /* Reserve empty slots */ IPSET_ATTR_CADT_MAX = 16, /* Create-only specific attributes */ - IPSET_ATTR_GC, + IPSET_ATTR_INITVAL, /* was unused IPSET_ATTR_GC */ IPSET_ATTR_HASHSIZE, IPSET_ATTR_MAXELEM, IPSET_ATTR_NETMASK, - IPSET_ATTR_PROBES, + IPSET_ATTR_BUCKETSIZE, /* was unused IPSET_ATTR_PROBES */ IPSET_ATTR_RESIZE, IPSET_ATTR_SIZE, /* Kernel-only */ @@ -157,6 +154,7 @@ enum ipset_errno { IPSET_ERR_COMMENT, IPSET_ERR_INVALID_MARKMASK, IPSET_ERR_SKBINFO, + IPSET_ERR_BITMASK_NETMASK_EXCL, /* Type specific error codes */ IPSET_ERR_TYPE_SPECIFIC = 4352, @@ -214,6 +212,8 @@ enum ipset_cadt_flags { enum ipset_create_flags { IPSET_CREATE_FLAG_BIT_FORCEADD = 0, IPSET_CREATE_FLAG_FORCEADD = (1 << IPSET_CREATE_FLAG_BIT_FORCEADD), + IPSET_CREATE_FLAG_BIT_BUCKETSIZE = 1, + IPSET_CREATE_FLAG_BUCKETSIZE = (1 << IPSET_CREATE_FLAG_BIT_BUCKETSIZE), IPSET_CREATE_FLAG_BIT_MAX = 7, }; diff --git a/linux-headers/include/linux/netfilter/nf_conntrack_common.h b/linux-headers/include/linux/netfilter/nf_conntrack_common.h index dbeeef77f23..3c990562e6e 100644 --- a/linux-headers/include/linux/netfilter/nf_conntrack_common.h +++ b/linux-headers/include/linux/netfilter/nf_conntrack_common.h @@ -94,7 +94,7 @@ enum ip_conntrack_status { IPS_UNTRACKED = (1 << IPS_UNTRACKED_BIT), - /* Conntrack got a helper explicitly attached via CT target. */ + /* Conntrack got a helper explicitly attached (ruleset, ctnetlink). */ IPS_HELPER_BIT = 13, IPS_HELPER = (1 << IPS_HELPER_BIT), diff --git a/linux-headers/include/linux/netfilter/nf_conntrack_sctp.h b/linux-headers/include/linux/netfilter/nf_conntrack_sctp.h index 0a40f6cfec7..f1923144522 100644 --- a/linux-headers/include/linux/netfilter/nf_conntrack_sctp.h +++ b/linux-headers/include/linux/netfilter/nf_conntrack_sctp.h @@ -15,7 +15,7 @@ enum sctp_conntrack { SCTP_CONNTRACK_SHUTDOWN_RECD, SCTP_CONNTRACK_SHUTDOWN_ACK_SENT, SCTP_CONNTRACK_HEARTBEAT_SENT, - SCTP_CONNTRACK_HEARTBEAT_ACKED, + SCTP_CONNTRACK_HEARTBEAT_ACKED, /* no longer used */ SCTP_CONNTRACK_MAX }; diff --git a/linux-headers/include/linux/netfilter/nf_tables.h b/linux-headers/include/linux/netfilter/nf_tables.h index 98272cb5f61..ca30232b7bc 100644 --- a/linux-headers/include/linux/netfilter/nf_tables.h +++ b/linux-headers/include/linux/netfilter/nf_tables.h @@ -97,6 +97,15 @@ enum nft_verdicts { * @NFT_MSG_NEWFLOWTABLE: add new flow table (enum nft_flowtable_attributes) * @NFT_MSG_GETFLOWTABLE: get flow table (enum nft_flowtable_attributes) * @NFT_MSG_DELFLOWTABLE: delete flow table (enum nft_flowtable_attributes) + * @NFT_MSG_GETRULE_RESET: get rules and reset stateful expressions (enum nft_obj_attributes) + * @NFT_MSG_DESTROYTABLE: destroy a table (enum nft_table_attributes) + * @NFT_MSG_DESTROYCHAIN: destroy a chain (enum nft_chain_attributes) + * @NFT_MSG_DESTROYRULE: destroy a rule (enum nft_rule_attributes) + * @NFT_MSG_DESTROYSET: destroy a set (enum nft_set_attributes) + * @NFT_MSG_DESTROYSETELEM: destroy a set element (enum nft_set_elem_attributes) + * @NFT_MSG_DESTROYOBJ: destroy a stateful object (enum nft_object_attributes) + * @NFT_MSG_DESTROYFLOWTABLE: destroy flow table (enum nft_flowtable_attributes) + * @NFT_MSG_GETSETELEM_RESET: get set elements and reset attached stateful expressions (enum nft_set_elem_attributes) */ enum nf_tables_msg_types { NFT_MSG_NEWTABLE, @@ -124,6 +133,15 @@ enum nf_tables_msg_types { NFT_MSG_NEWFLOWTABLE, NFT_MSG_GETFLOWTABLE, NFT_MSG_DELFLOWTABLE, + NFT_MSG_GETRULE_RESET, + NFT_MSG_DESTROYTABLE, + NFT_MSG_DESTROYCHAIN, + NFT_MSG_DESTROYRULE, + NFT_MSG_DESTROYSET, + NFT_MSG_DESTROYSETELEM, + NFT_MSG_DESTROYOBJ, + NFT_MSG_DESTROYFLOWTABLE, + NFT_MSG_GETSETELEM_RESET, NFT_MSG_MAX, }; @@ -164,7 +182,10 @@ enum nft_hook_attributes { */ enum nft_table_flags { NFT_TABLE_F_DORMANT = 0x1, + NFT_TABLE_F_OWNER = 0x2, }; +#define NFT_TABLE_F_MASK (NFT_TABLE_F_DORMANT | \ + NFT_TABLE_F_OWNER) /** * enum nft_table_attributes - nf_tables table netlink attributes @@ -173,6 +194,7 @@ enum nft_table_flags { * @NFTA_TABLE_FLAGS: bitmask of enum nft_table_flags (NLA_U32) * @NFTA_TABLE_USE: number of chains in this table (NLA_U32) * @NFTA_TABLE_USERDATA: user data (NLA_BINARY) + * @NFTA_TABLE_OWNER: owner of this table through netlink portID (NLA_U32) */ enum nft_table_attributes { NFTA_TABLE_UNSPEC, @@ -182,6 +204,7 @@ enum nft_table_attributes { NFTA_TABLE_HANDLE, NFTA_TABLE_PAD, NFTA_TABLE_USERDATA, + NFTA_TABLE_OWNER, __NFTA_TABLE_MAX }; #define NFTA_TABLE_MAX (__NFTA_TABLE_MAX - 1) @@ -240,6 +263,7 @@ enum nft_chain_attributes { * @NFTA_RULE_USERDATA: user data (NLA_BINARY, NFT_USERDATA_MAXLEN) * @NFTA_RULE_ID: uniquely identifies a rule in a transaction (NLA_U32) * @NFTA_RULE_POSITION_ID: transaction unique identifier of the previous rule (NLA_U32) + * @NFTA_RULE_CHAIN_ID: add the rule to chain by ID, alternative to @NFTA_RULE_CHAIN (NLA_U32) */ enum nft_rule_attributes { NFTA_RULE_UNSPEC, @@ -293,6 +317,7 @@ enum nft_rule_compat_attributes { * @NFT_SET_EVAL: set can be updated from the evaluation path * @NFT_SET_OBJECT: set contains stateful objects * @NFT_SET_CONCAT: set contains a concatenation + * @NFT_SET_EXPR: set contains expressions */ enum nft_set_flags { NFT_SET_ANONYMOUS = 0x1, @@ -303,6 +328,7 @@ enum nft_set_flags { NFT_SET_EVAL = 0x20, NFT_SET_OBJECT = 0x40, NFT_SET_CONCAT = 0x80, + NFT_SET_EXPR = 0x100, }; /** @@ -361,6 +387,7 @@ enum nft_set_field_attributes { * @NFTA_SET_OBJ_TYPE: stateful object type (NLA_U32: NFT_OBJECT_*) * @NFTA_SET_HANDLE: set handle (NLA_U64) * @NFTA_SET_EXPR: set expression (NLA_NESTED: nft_expr_attributes) + * @NFTA_SET_EXPRESSIONS: list of expressions (NLA_NESTED: nft_list_attributes) */ enum nft_set_attributes { NFTA_SET_UNSPEC, @@ -381,6 +408,7 @@ enum nft_set_attributes { NFTA_SET_OBJ_TYPE, NFTA_SET_HANDLE, NFTA_SET_EXPR, + NFTA_SET_EXPRESSIONS, __NFTA_SET_MAX }; #define NFTA_SET_MAX (__NFTA_SET_MAX - 1) @@ -389,9 +417,11 @@ enum nft_set_attributes { * enum nft_set_elem_flags - nf_tables set element flags * * @NFT_SET_ELEM_INTERVAL_END: element ends the previous interval + * @NFT_SET_ELEM_CATCHALL: special catch-all element */ enum nft_set_elem_flags { NFT_SET_ELEM_INTERVAL_END = 0x1, + NFT_SET_ELEM_CATCHALL = 0x2, }; /** @@ -406,6 +436,7 @@ enum nft_set_elem_flags { * @NFTA_SET_ELEM_EXPR: expression (NLA_NESTED: nft_expr_attributes) * @NFTA_SET_ELEM_OBJREF: stateful object reference (NLA_STRING) * @NFTA_SET_ELEM_KEY_END: closing key value (NLA_NESTED: nft_data) + * @NFTA_SET_ELEM_EXPRESSIONS: list of expressions (NLA_NESTED: nft_list_attributes) */ enum nft_set_elem_attributes { NFTA_SET_ELEM_UNSPEC, @@ -419,6 +450,7 @@ enum nft_set_elem_attributes { NFTA_SET_ELEM_PAD, NFTA_SET_ELEM_OBJREF, NFTA_SET_ELEM_KEY_END, + NFTA_SET_ELEM_EXPRESSIONS, __NFTA_SET_ELEM_MAX }; #define NFTA_SET_ELEM_MAX (__NFTA_SET_ELEM_MAX - 1) @@ -656,7 +688,7 @@ enum nft_range_ops { * enum nft_range_attributes - nf_tables range expression netlink attributes * * @NFTA_RANGE_SREG: source register of data to compare (NLA_U32: nft_registers) - * @NFTA_RANGE_OP: cmp operation (NLA_U32: nft_cmp_ops) + * @NFTA_RANGE_OP: cmp operation (NLA_U32: nft_range_ops) * @NFTA_RANGE_FROM_DATA: data range from (NLA_NESTED: nft_data_attributes) * @NFTA_RANGE_TO_DATA: data range to (NLA_NESTED: nft_data_attributes) */ @@ -702,6 +734,7 @@ enum nft_dynset_ops { enum nft_dynset_flags { NFT_DYNSET_F_INV = (1 << 0), + NFT_DYNSET_F_EXPR = (1 << 1), }; /** @@ -715,6 +748,7 @@ enum nft_dynset_flags { * @NFTA_DYNSET_TIMEOUT: timeout value for the new element (NLA_U64) * @NFTA_DYNSET_EXPR: expression (NLA_NESTED: nft_expr_attributes) * @NFTA_DYNSET_FLAGS: flags (NLA_U32) + * @NFTA_DYNSET_EXPRESSIONS: list of expressions (NLA_NESTED: nft_list_attributes) */ enum nft_dynset_attributes { NFTA_DYNSET_UNSPEC, @@ -727,6 +761,7 @@ enum nft_dynset_attributes { NFTA_DYNSET_EXPR, NFTA_DYNSET_PAD, NFTA_DYNSET_FLAGS, + NFTA_DYNSET_EXPRESSIONS, __NFTA_DYNSET_MAX, }; #define NFTA_DYNSET_MAX (__NFTA_DYNSET_MAX - 1) @@ -737,11 +772,14 @@ enum nft_dynset_attributes { * @NFT_PAYLOAD_LL_HEADER: link layer header * @NFT_PAYLOAD_NETWORK_HEADER: network header * @NFT_PAYLOAD_TRANSPORT_HEADER: transport header + * @NFT_PAYLOAD_INNER_HEADER: inner header / payload */ enum nft_payload_bases { NFT_PAYLOAD_LL_HEADER, NFT_PAYLOAD_NETWORK_HEADER, NFT_PAYLOAD_TRANSPORT_HEADER, + NFT_PAYLOAD_INNER_HEADER, + NFT_PAYLOAD_TUN_HEADER, }; /** @@ -761,6 +799,32 @@ enum nft_payload_csum_flags { NFT_PAYLOAD_L4CSUM_PSEUDOHDR = (1 << 0), }; +enum nft_inner_type { + NFT_INNER_UNSPEC = 0, + NFT_INNER_VXLAN, + NFT_INNER_GENEVE, +}; + +enum nft_inner_flags { + NFT_INNER_HDRSIZE = (1 << 0), + NFT_INNER_LL = (1 << 1), + NFT_INNER_NH = (1 << 2), + NFT_INNER_TH = (1 << 3), +}; +#define NFT_INNER_MASK (NFT_INNER_HDRSIZE | NFT_INNER_LL | \ + NFT_INNER_NH | NFT_INNER_TH) + +enum nft_inner_attributes { + NFTA_INNER_UNSPEC, + NFTA_INNER_NUM, + NFTA_INNER_TYPE, + NFTA_INNER_FLAGS, + NFTA_INNER_HDRSIZE, + NFTA_INNER_EXPR, + __NFTA_INNER_MAX +}; +#define NFTA_INNER_MAX (__NFTA_INNER_MAX - 1) + /** * enum nft_payload_attributes - nf_tables payload expression netlink attributes * @@ -797,11 +861,15 @@ enum nft_exthdr_flags { * @NFT_EXTHDR_OP_IPV6: match against ipv6 extension headers * @NFT_EXTHDR_OP_TCP: match against tcp options * @NFT_EXTHDR_OP_IPV4: match against ipv4 options + * @NFT_EXTHDR_OP_SCTP: match against sctp chunks + * @NFT_EXTHDR_OP_DCCP: match against dccp otions */ enum nft_exthdr_op { NFT_EXTHDR_OP_IPV6, NFT_EXTHDR_OP_TCPOPT, NFT_EXTHDR_OP_IPV4, + NFT_EXTHDR_OP_SCTP, + NFT_EXTHDR_OP_DCCP, __NFT_EXTHDR_OP_MAX }; #define NFT_EXTHDR_OP_MAX (__NFT_EXTHDR_OP_MAX - 1) @@ -815,7 +883,7 @@ enum nft_exthdr_op { * @NFTA_EXTHDR_LEN: extension header length (NLA_U32) * @NFTA_EXTHDR_FLAGS: extension header flags (NLA_U32) * @NFTA_EXTHDR_OP: option match type (NLA_U32) - * @NFTA_EXTHDR_SREG: option match type (NLA_U32) + * @NFTA_EXTHDR_SREG: source register (NLA_U32: nft_registers) */ enum nft_exthdr_attributes { NFTA_EXTHDR_UNSPEC, @@ -868,6 +936,7 @@ enum nft_exthdr_attributes { * @NFT_META_TIME_HOUR: hour of day (in seconds) * @NFT_META_SDIF: slave device interface index * @NFT_META_SDIFNAME: slave device interface name + * @NFT_META_BRI_BROUTE: packet br_netfilter_broute bit */ enum nft_meta_keys { NFT_META_LEN, @@ -878,7 +947,8 @@ enum nft_meta_keys { NFT_META_OIF, NFT_META_IIFNAME, NFT_META_OIFNAME, - NFT_META_IIFTYPE, + NFT_META_IFTYPE, +#define NFT_META_IIFTYPE NFT_META_IFTYPE NFT_META_OIFTYPE, NFT_META_SKUID, NFT_META_SKGID, @@ -905,6 +975,8 @@ enum nft_meta_keys { NFT_META_TIME_HOUR, NFT_META_SDIF, NFT_META_SDIFNAME, + NFT_META_BRI_BROUTE, + __NFT_META_IIFTYPE, }; /** @@ -1000,11 +1072,13 @@ enum nft_rt_attributes { * * @NFTA_SOCKET_KEY: socket key to match * @NFTA_SOCKET_DREG: destination register + * @NFTA_SOCKET_LEVEL: cgroups2 ancestor level (only for cgroupsv2) */ enum nft_socket_attributes { NFTA_SOCKET_UNSPEC, NFTA_SOCKET_KEY, NFTA_SOCKET_DREG, + NFTA_SOCKET_LEVEL, __NFTA_SOCKET_MAX }; #define NFTA_SOCKET_MAX (__NFTA_SOCKET_MAX - 1) @@ -1015,11 +1089,13 @@ enum nft_socket_attributes { * @NFT_SOCKET_TRANSPARENT: Value of the IP(V6)_TRANSPARENT socket option * @NFT_SOCKET_MARK: Value of the socket mark * @NFT_SOCKET_WILDCARD: Whether the socket is zero-bound (e.g. 0.0.0.0 or ::0) + * @NFT_SOCKET_CGROUPV2: Match on cgroups version 2 */ enum nft_socket_keys { NFT_SOCKET_TRANSPARENT, NFT_SOCKET_MARK, NFT_SOCKET_WILDCARD, + NFT_SOCKET_CGROUPV2, __NFT_SOCKET_MAX }; #define NFT_SOCKET_MAX (__NFT_SOCKET_MAX - 1) @@ -1173,13 +1249,28 @@ enum nft_counter_attributes { }; #define NFTA_COUNTER_MAX (__NFTA_COUNTER_MAX - 1) +/** + * enum nft_last_attributes - nf_tables last expression netlink attributes + * + * @NFTA_LAST_SET: last update has been set, zero means never updated (NLA_U32) + * @NFTA_LAST_MSECS: milliseconds since last update (NLA_U64) + */ +enum nft_last_attributes { + NFTA_LAST_UNSPEC, + NFTA_LAST_SET, + NFTA_LAST_MSECS, + NFTA_LAST_PAD, + __NFTA_LAST_MAX +}; +#define NFTA_LAST_MAX (__NFTA_LAST_MAX - 1) + /** * enum nft_log_attributes - nf_tables log expression netlink attributes * - * @NFTA_LOG_GROUP: netlink group to send messages to (NLA_U32) + * @NFTA_LOG_GROUP: netlink group to send messages to (NLA_U16) * @NFTA_LOG_PREFIX: prefix to prepend to log messages (NLA_STRING) * @NFTA_LOG_SNAPLEN: length of payload to include in netlink message (NLA_U32) - * @NFTA_LOG_QTHRESHOLD: queue threshold (NLA_U32) + * @NFTA_LOG_QTHRESHOLD: queue threshold (NLA_U16) * @NFTA_LOG_LEVEL: log level (NLA_U32) * @NFTA_LOG_FLAGS: logging flags (NLA_U32) */ diff --git a/linux-headers/include/linux/netfilter/nfnetlink.h b/linux-headers/include/linux/netfilter/nfnetlink.h index a89f3a56a33..b89a3e61b22 100644 --- a/linux-headers/include/linux/netfilter/nfnetlink.h +++ b/linux-headers/include/linux/netfilter/nfnetlink.h @@ -60,7 +60,8 @@ struct nfgenmsg { #define NFNL_SUBSYS_CTHELPER 9 #define NFNL_SUBSYS_NFTABLES 10 #define NFNL_SUBSYS_NFT_COMPAT 11 -#define NFNL_SUBSYS_COUNT 12 +#define NFNL_SUBSYS_HOOK 12 +#define NFNL_SUBSYS_COUNT 13 /* Reserved control nfnetlink messages */ #define NFNL_MSG_BATCH_BEGIN NLMSG_MIN_TYPE diff --git a/linux-headers/include/linux/netfilter/nfnetlink_conntrack.h b/linux-headers/include/linux/netfilter/nfnetlink_conntrack.h index d8484be72fd..c2ac7269acf 100644 --- a/linux-headers/include/linux/netfilter/nfnetlink_conntrack.h +++ b/linux-headers/include/linux/netfilter/nfnetlink_conntrack.h @@ -56,6 +56,7 @@ enum ctattr_type { CTA_LABELS_MASK, CTA_SYNPROXY, CTA_FILTER, + CTA_STATUS_MASK, __CTA_MAX }; #define CTA_MAX (__CTA_MAX - 1) @@ -257,6 +258,7 @@ enum ctattr_stats_cpu { CTA_STATS_ERROR, CTA_STATS_SEARCH_RESTART, CTA_STATS_CLASH_RESOLVE, + CTA_STATS_CHAIN_TOOLONG, __CTA_STATS_MAX, }; #define CTA_STATS_MAX (__CTA_STATS_MAX - 1) diff --git a/linux-headers/include/linux/netfilter/nfnetlink_cthelper.h b/linux-headers/include/linux/netfilter/nfnetlink_cthelper.h index a13137afc42..70af02092d1 100644 --- a/linux-headers/include/linux/netfilter/nfnetlink_cthelper.h +++ b/linux-headers/include/linux/netfilter/nfnetlink_cthelper.h @@ -5,7 +5,7 @@ #define NFCT_HELPER_STATUS_DISABLED 0 #define NFCT_HELPER_STATUS_ENABLED 1 -enum nfnl_acct_msg_types { +enum nfnl_cthelper_msg_types { NFNL_MSG_CTHELPER_NEW, NFNL_MSG_CTHELPER_GET, NFNL_MSG_CTHELPER_DEL, diff --git a/linux-headers/include/linux/netfilter/nfnetlink_cttimeout.h b/linux-headers/include/linux/netfilter/nfnetlink_cttimeout.h index 6b20fb22717..aa805e6d4e2 100644 --- a/linux-headers/include/linux/netfilter/nfnetlink_cttimeout.h +++ b/linux-headers/include/linux/netfilter/nfnetlink_cttimeout.h @@ -94,7 +94,7 @@ enum ctattr_timeout_sctp { CTA_TIMEOUT_SCTP_SHUTDOWN_RECD, CTA_TIMEOUT_SCTP_SHUTDOWN_ACK_SENT, CTA_TIMEOUT_SCTP_HEARTBEAT_SENT, - CTA_TIMEOUT_SCTP_HEARTBEAT_ACKED, + CTA_TIMEOUT_SCTP_HEARTBEAT_ACKED, /* no longer used */ __CTA_TIMEOUT_SCTP_MAX }; #define CTA_TIMEOUT_SCTP_MAX (__CTA_TIMEOUT_SCTP_MAX - 1) diff --git a/linux-headers/include/linux/netfilter/nfnetlink_hook.h b/linux-headers/include/linux/netfilter/nfnetlink_hook.h new file mode 100644 index 00000000000..84a561a74b9 --- /dev/null +++ b/linux-headers/include/linux/netfilter/nfnetlink_hook.h @@ -0,0 +1,82 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _NFNL_HOOK_H_ +#define _NFNL_HOOK_H_ + +enum nfnl_hook_msg_types { + NFNL_MSG_HOOK_GET, + NFNL_MSG_HOOK_MAX, +}; + +/** + * enum nfnl_hook_attributes - netfilter hook netlink attributes + * + * @NFNLA_HOOK_HOOKNUM: netfilter hook number (NLA_U32) + * @NFNLA_HOOK_PRIORITY: netfilter hook priority (NLA_U32) + * @NFNLA_HOOK_DEV: netdevice name (NLA_STRING) + * @NFNLA_HOOK_FUNCTION_NAME: hook function name (NLA_STRING) + * @NFNLA_HOOK_MODULE_NAME: kernel module that registered this hook (NLA_STRING) + * @NFNLA_HOOK_CHAIN_INFO: basechain hook metadata (NLA_NESTED) + */ +enum nfnl_hook_attributes { + NFNLA_HOOK_UNSPEC, + NFNLA_HOOK_HOOKNUM, + NFNLA_HOOK_PRIORITY, + NFNLA_HOOK_DEV, + NFNLA_HOOK_FUNCTION_NAME, + NFNLA_HOOK_MODULE_NAME, + NFNLA_HOOK_CHAIN_INFO, + __NFNLA_HOOK_MAX +}; +#define NFNLA_HOOK_MAX (__NFNLA_HOOK_MAX - 1) + +/** + * enum nfnl_hook_chain_info_attributes - chain description + * + * @NFNLA_HOOK_INFO_DESC: nft chain and table name (NLA_NESTED) + * @NFNLA_HOOK_INFO_TYPE: chain type (enum nfnl_hook_chaintype) (NLA_U32) + * + * NFNLA_HOOK_INFO_DESC depends on NFNLA_HOOK_INFO_TYPE value: + * NFNL_HOOK_TYPE_NFTABLES: enum nft_table_attributes + * NFNL_HOOK_TYPE_BPF: enum nfnl_hook_bpf_attributes + */ +enum nfnl_hook_chain_info_attributes { + NFNLA_HOOK_INFO_UNSPEC, + NFNLA_HOOK_INFO_DESC, + NFNLA_HOOK_INFO_TYPE, + __NFNLA_HOOK_INFO_MAX, +}; +#define NFNLA_HOOK_INFO_MAX (__NFNLA_HOOK_INFO_MAX - 1) + +enum nfnl_hook_chain_desc_attributes { + NFNLA_CHAIN_UNSPEC, + NFNLA_CHAIN_TABLE, + NFNLA_CHAIN_FAMILY, + NFNLA_CHAIN_NAME, + __NFNLA_CHAIN_MAX, +}; +#define NFNLA_CHAIN_MAX (__NFNLA_CHAIN_MAX - 1) + +/** + * enum nfnl_hook_chaintype - chain type + * + * @NFNL_HOOK_TYPE_NFTABLES: nf_tables base chain + * @NFNL_HOOK_TYPE_BPF: bpf program + */ +enum nfnl_hook_chaintype { + NFNL_HOOK_TYPE_NFTABLES = 0x1, + NFNL_HOOK_TYPE_BPF, +}; + +/** + * enum nfnl_hook_bpf_attributes - bpf prog description + * + * @NFNLA_HOOK_BPF_ID: bpf program id (NLA_U32) + */ +enum nfnl_hook_bpf_attributes { + NFNLA_HOOK_BPF_UNSPEC, + NFNLA_HOOK_BPF_ID, + __NFNLA_HOOK_BPF_MAX, +}; +#define NFNLA_HOOK_BPF_MAX (__NFNLA_HOOK_BPF_MAX - 1) + +#endif /* _NFNL_HOOK_H */ diff --git a/linux-headers/include/linux/netfilter/nfnetlink_log.h b/linux-headers/include/linux/netfilter/nfnetlink_log.h index 45c8d3b027e..0af9c113d66 100644 --- a/linux-headers/include/linux/netfilter/nfnetlink_log.h +++ b/linux-headers/include/linux/netfilter/nfnetlink_log.h @@ -61,7 +61,7 @@ enum nfulnl_attr_type { NFULA_HWTYPE, /* hardware type */ NFULA_HWHEADER, /* hardware header */ NFULA_HWLEN, /* hardware header length */ - NFULA_CT, /* nf_conntrack_netlink.h */ + NFULA_CT, /* nfnetlink_conntrack.h */ NFULA_CT_INFO, /* enum ip_conntrack_info */ NFULA_VLAN, /* nested attribute: packet vlan info */ NFULA_L2HDR, /* full L2 header */ diff --git a/linux-headers/include/linux/netfilter/nfnetlink_queue.h b/linux-headers/include/linux/netfilter/nfnetlink_queue.h index bcb2cb5d40b..efcb7c044a7 100644 --- a/linux-headers/include/linux/netfilter/nfnetlink_queue.h +++ b/linux-headers/include/linux/netfilter/nfnetlink_queue.h @@ -51,16 +51,18 @@ enum nfqnl_attr_type { NFQA_IFINDEX_PHYSOUTDEV, /* __u32 ifindex */ NFQA_HWADDR, /* nfqnl_msg_packet_hw */ NFQA_PAYLOAD, /* opaque data payload */ - NFQA_CT, /* nf_conntrack_netlink.h */ + NFQA_CT, /* nfnetlink_conntrack.h */ NFQA_CT_INFO, /* enum ip_conntrack_info */ NFQA_CAP_LEN, /* __u32 length of captured packet */ NFQA_SKB_INFO, /* __u32 skb meta information */ - NFQA_EXP, /* nf_conntrack_netlink.h */ + NFQA_EXP, /* nfnetlink_conntrack.h */ NFQA_UID, /* __u32 sk uid */ NFQA_GID, /* __u32 sk gid */ NFQA_SECCTX, /* security context string */ NFQA_VLAN, /* nested attribute: packet vlan info */ NFQA_L2HDR, /* full L2 header */ + NFQA_PRIORITY, /* skb->priority */ + NFQA_CGROUP_CLASSID, /* __u32 cgroup classid */ __NFQA_MAX }; diff --git a/linux-headers/include/linux/netfilter/x_tables.h b/linux-headers/include/linux/netfilter/x_tables.h index 89ee50d6cf7..15e4a9cd32b 100644 --- a/linux-headers/include/linux/netfilter/x_tables.h +++ b/linux-headers/include/linux/netfilter/x_tables.h @@ -28,7 +28,7 @@ struct xt_entry_match { __u16 match_size; } u; - unsigned char data[0]; + unsigned char data[]; }; struct xt_entry_target { @@ -119,7 +119,7 @@ struct xt_counters_info { unsigned int num_counters; /* The counters (actually `number' of these). */ - struct xt_counters counters[0]; + struct xt_counters counters[]; }; #define XT_INV_PROTO 0x40 /* Invert the sense of PROTO. */ diff --git a/linux-headers/include/linux/netfilter/xt_AUDIT.h b/linux-headers/include/linux/netfilter/xt_AUDIT.h index 1b314e2f84a..56a3f6092e0 100644 --- a/linux-headers/include/linux/netfilter/xt_AUDIT.h +++ b/linux-headers/include/linux/netfilter/xt_AUDIT.h @@ -4,10 +4,6 @@ * * (C) 2010-2011 Thomas Graf * (C) 2010-2011 Red Hat, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _XT_AUDIT_TARGET_H diff --git a/linux-headers/include/linux/netfilter/xt_IDLETIMER.h b/linux-headers/include/linux/netfilter/xt_IDLETIMER.h index 49ddcdc61c0..7bfb31a66fc 100644 --- a/linux-headers/include/linux/netfilter/xt_IDLETIMER.h +++ b/linux-headers/include/linux/netfilter/xt_IDLETIMER.h @@ -1,6 +1,5 @@ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ /* - * linux/include/linux/netfilter/xt_IDLETIMER.h - * * Header file for Xtables timer target module. * * Copyright (C) 2004, 2010 Nokia Corporation @@ -10,20 +9,6 @@ * by Luciano Coelho * * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA */ #ifndef _XT_IDLETIMER_H diff --git a/linux-headers/include/linux/netfilter/xt_SECMARK.h b/linux-headers/include/linux/netfilter/xt_SECMARK.h index 1f2a708413f..beb2cadba8a 100644 --- a/linux-headers/include/linux/netfilter/xt_SECMARK.h +++ b/linux-headers/include/linux/netfilter/xt_SECMARK.h @@ -20,4 +20,10 @@ struct xt_secmark_target_info { char secctx[SECMARK_SECCTX_MAX]; }; +struct xt_secmark_target_info_v1 { + __u8 mode; + char secctx[SECMARK_SECCTX_MAX]; + __u32 secid; +}; + #endif /*_XT_SECMARK_H_target */ diff --git a/linux-headers/include/linux/netfilter/xt_connmark.h b/linux-headers/include/linux/netfilter/xt_connmark.h index f01c19b83a2..41b578ccd03 100644 --- a/linux-headers/include/linux/netfilter/xt_connmark.h +++ b/linux-headers/include/linux/netfilter/xt_connmark.h @@ -1,18 +1,13 @@ /* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* Copyright (C) 2002,2004 MARA Systems AB + * by Henrik Nordstrom + */ + #ifndef _XT_CONNMARK_H #define _XT_CONNMARK_H #include -/* Copyright (C) 2002,2004 MARA Systems AB - * by Henrik Nordstrom - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - enum { XT_CONNMARK_SET = 0, XT_CONNMARK_SAVE, diff --git a/linux-headers/include/linux/netfilter/xt_osf.h b/linux-headers/include/linux/netfilter/xt_osf.h index 6e466236ca4..f1f097896bd 100644 --- a/linux-headers/include/linux/netfilter/xt_osf.h +++ b/linux-headers/include/linux/netfilter/xt_osf.h @@ -1,20 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ /* * Copyright (c) 2003+ Evgeniy Polyakov - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see . */ #ifndef _XT_OSF_H diff --git a/linux-headers/include/linux/netfilter_arp/arp_tables.h b/linux-headers/include/linux/netfilter_arp/arp_tables.h index 8b51b418c47..2857a7cc31c 100644 --- a/linux-headers/include/linux/netfilter_arp/arp_tables.h +++ b/linux-headers/include/linux/netfilter_arp/arp_tables.h @@ -107,7 +107,7 @@ struct arpt_entry struct xt_counters counters; /* The matches (if any), then the target. */ - unsigned char elems[0]; + unsigned char elems[]; }; /* @@ -179,7 +179,7 @@ struct arpt_replace { struct xt_counters *counters; /* The entries (hang off end: not really an array). */ - struct arpt_entry entries[0]; + struct arpt_entry entries[]; }; /* The argument to ARPT_SO_GET_ENTRIES. */ @@ -191,7 +191,7 @@ struct arpt_get_entries { unsigned int size; /* The entries. */ - struct arpt_entry entrytable[0]; + struct arpt_entry entrytable[]; }; /* Helper functions */ diff --git a/linux-headers/include/linux/netfilter_bridge/ebt_among.h b/linux-headers/include/linux/netfilter_bridge/ebt_among.h index 9acf757bc1f..73b26a280c4 100644 --- a/linux-headers/include/linux/netfilter_bridge/ebt_among.h +++ b/linux-headers/include/linux/netfilter_bridge/ebt_among.h @@ -40,7 +40,7 @@ struct ebt_mac_wormhash_tuple { struct ebt_mac_wormhash { int table[257]; int poolsize; - struct ebt_mac_wormhash_tuple pool[0]; + struct ebt_mac_wormhash_tuple pool[]; }; #define ebt_mac_wormhash_size(x) ((x) ? sizeof(struct ebt_mac_wormhash) \ diff --git a/linux-headers/include/linux/netfilter_bridge/ebtables.h b/linux-headers/include/linux/netfilter_bridge/ebtables.h index d1c6b8f9f9e..287e49a20ed 100644 --- a/linux-headers/include/linux/netfilter_bridge/ebtables.h +++ b/linux-headers/include/linux/netfilter_bridge/ebtables.h @@ -87,7 +87,7 @@ struct ebt_entries { /* nr. of entries */ unsigned int nentries; /* entry list */ - char data[0] __attribute__ ((aligned (__alignof__(struct ebt_replace)))); + char data[] __attribute__ ((aligned (__alignof__(struct ebt_replace)))); }; /* used for the bitmask of struct ebt_entry */ @@ -129,7 +129,7 @@ struct ebt_entry_match { } u; /* size of data */ unsigned int match_size; - unsigned char data[0] __attribute__ ((aligned (__alignof__(struct ebt_replace)))); + unsigned char data[] __attribute__ ((aligned (__alignof__(struct ebt_replace)))); }; struct ebt_entry_watcher { @@ -142,7 +142,7 @@ struct ebt_entry_watcher { } u; /* size of data */ unsigned int watcher_size; - unsigned char data[0] __attribute__ ((aligned (__alignof__(struct ebt_replace)))); + unsigned char data[] __attribute__ ((aligned (__alignof__(struct ebt_replace)))); }; struct ebt_entry_target { @@ -182,13 +182,15 @@ struct ebt_entry { unsigned char sourcemsk[ETH_ALEN]; unsigned char destmac[ETH_ALEN]; unsigned char destmsk[ETH_ALEN]; - /* sizeof ebt_entry + matches */ - unsigned int watchers_offset; - /* sizeof ebt_entry + matches + watchers */ - unsigned int target_offset; - /* sizeof ebt_entry + matches + watchers + target */ - unsigned int next_offset; - unsigned char elems[0] __attribute__ ((aligned (__alignof__(struct ebt_replace)))); + __struct_group(/* no tag */, offsets, /* no attrs */, + /* sizeof ebt_entry + matches */ + unsigned int watchers_offset; + /* sizeof ebt_entry + matches + watchers */ + unsigned int target_offset; + /* sizeof ebt_entry + matches + watchers + target */ + unsigned int next_offset; + ); + unsigned char elems[] __attribute__ ((aligned (__alignof__(struct ebt_replace)))); }; static __inline__ struct ebt_entry_target * diff --git a/linux-headers/include/linux/netfilter_decnet.h b/linux-headers/include/linux/netfilter_decnet.h deleted file mode 100644 index 5fd3b4d8049..00000000000 --- a/linux-headers/include/linux/netfilter_decnet.h +++ /dev/null @@ -1,68 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef __LINUX_DECNET_NETFILTER_H -#define __LINUX_DECNET_NETFILTER_H - -/* DECnet-specific defines for netfilter. - * This file (C) Steve Whitehouse 1999 derived from the - * ipv4 netfilter header file which is - * (C)1998 Rusty Russell -- This code is GPL. - */ - -#include - -/* only for userspace compatibility */ - -#include /* for INT_MIN, INT_MAX */ - -/* kernel define is in netfilter_defs.h */ -#define NF_DN_NUMHOOKS 7 - -/* DECnet Hooks */ -/* After promisc drops, checksum checks. */ -#define NF_DN_PRE_ROUTING 0 -/* If the packet is destined for this box. */ -#define NF_DN_LOCAL_IN 1 -/* If the packet is destined for another interface. */ -#define NF_DN_FORWARD 2 -/* Packets coming from a local process. */ -#define NF_DN_LOCAL_OUT 3 -/* Packets about to hit the wire. */ -#define NF_DN_POST_ROUTING 4 -/* Input Hello Packets */ -#define NF_DN_HELLO 5 -/* Input Routing Packets */ -#define NF_DN_ROUTE 6 - -enum nf_dn_hook_priorities { - NF_DN_PRI_FIRST = INT_MIN, - NF_DN_PRI_CONNTRACK = -200, - NF_DN_PRI_MANGLE = -150, - NF_DN_PRI_NAT_DST = -100, - NF_DN_PRI_FILTER = 0, - NF_DN_PRI_NAT_SRC = 100, - NF_DN_PRI_DNRTMSG = 200, - NF_DN_PRI_LAST = INT_MAX, -}; - -struct nf_dn_rtmsg { - int nfdn_ifindex; -}; - -#define NFDN_RTMSG(r) ((unsigned char *)(r) + NLMSG_ALIGN(sizeof(struct nf_dn_rtmsg))) - -/* backwards compatibility for userspace */ -#define DNRMG_L1_GROUP 0x01 -#define DNRMG_L2_GROUP 0x02 - -enum { - DNRNG_NLGRP_NONE, -#define DNRNG_NLGRP_NONE DNRNG_NLGRP_NONE - DNRNG_NLGRP_L1, -#define DNRNG_NLGRP_L1 DNRNG_NLGRP_L1 - DNRNG_NLGRP_L2, -#define DNRNG_NLGRP_L2 DNRNG_NLGRP_L2 - __DNRNG_NLGRP_MAX -}; -#define DNRNG_NLGRP_MAX (__DNRNG_NLGRP_MAX - 1) - -#endif /*__LINUX_DECNET_NETFILTER_H*/ diff --git a/linux-headers/include/linux/netfilter_ipv4/ip_tables.h b/linux-headers/include/linux/netfilter_ipv4/ip_tables.h index e1ce5b3a2ae..52024cbc980 100644 --- a/linux-headers/include/linux/netfilter_ipv4/ip_tables.h +++ b/linux-headers/include/linux/netfilter_ipv4/ip_tables.h @@ -119,7 +119,7 @@ struct ipt_entry { struct xt_counters counters; /* The matches (if any), then the target. */ - unsigned char elems[0]; + unsigned char elems[]; }; /* @@ -201,7 +201,7 @@ struct ipt_replace { struct xt_counters *counters; /* The entries (hang off end: not really an array). */ - struct ipt_entry entries[0]; + struct ipt_entry entries[]; }; /* The argument to IPT_SO_GET_ENTRIES. */ @@ -213,7 +213,7 @@ struct ipt_get_entries { unsigned int size; /* The entries. */ - struct ipt_entry entrytable[0]; + struct ipt_entry entrytable[]; }; /* Helper functions */ diff --git a/linux-headers/include/linux/netfilter_ipv6/ip6_tables.h b/linux-headers/include/linux/netfilter_ipv6/ip6_tables.h index 7bbead8c7f7..68109ece60a 100644 --- a/linux-headers/include/linux/netfilter_ipv6/ip6_tables.h +++ b/linux-headers/include/linux/netfilter_ipv6/ip6_tables.h @@ -241,7 +241,7 @@ struct ip6t_replace { struct xt_counters *counters; /* The entries (hang off end: not really an array). */ - struct ip6t_entry entries[0]; + struct ip6t_entry entries[]; }; /* The argument to IP6T_SO_GET_ENTRIES. */ @@ -253,7 +253,7 @@ struct ip6t_get_entries { unsigned int size; /* The entries. */ - struct ip6t_entry entrytable[0]; + struct ip6t_entry entrytable[]; }; /* Helper functions */ diff --git a/linux-headers/include/linux/netfilter_ipv6/ip6t_LOG.h b/linux-headers/include/linux/netfilter_ipv6/ip6t_LOG.h index 23e91a9c258..0b7b16dbdec 100644 --- a/linux-headers/include/linux/netfilter_ipv6/ip6t_LOG.h +++ b/linux-headers/include/linux/netfilter_ipv6/ip6t_LOG.h @@ -17,4 +17,4 @@ struct ip6t_log_info { char prefix[30]; }; -#endif /*_IPT_LOG_H*/ +#endif /* _IP6T_LOG_H */ diff --git a/linux-headers/include/linux/netlink.h b/linux-headers/include/linux/netlink.h index 5024c543574..47bac97ec76 100644 --- a/linux-headers/include/linux/netlink.h +++ b/linux-headers/include/linux/netlink.h @@ -20,7 +20,7 @@ #define NETLINK_CONNECTOR 11 #define NETLINK_NETFILTER 12 /* netfilter subsystem */ #define NETLINK_IP6_FW 13 -#define NETLINK_DNRTMSG 14 /* DECnet routing messages */ +#define NETLINK_DNRTMSG 14 /* DECnet routing messages (obsolete) */ #define NETLINK_KOBJECT_UEVENT 15 /* Kernel messages to userspace */ #define NETLINK_GENERIC 16 /* leave room for NETLINK_DM (DM Events) */ @@ -41,12 +41,20 @@ struct sockaddr_nl { __u32 nl_groups; /* multicast groups mask */ }; +/** + * struct nlmsghdr - fixed format metadata header of Netlink messages + * @nlmsg_len: Length of message including header + * @nlmsg_type: Message content type + * @nlmsg_flags: Additional flags + * @nlmsg_seq: Sequence number + * @nlmsg_pid: Sending process port ID + */ struct nlmsghdr { - __u32 nlmsg_len; /* Length of message including header */ - __u16 nlmsg_type; /* Message content */ - __u16 nlmsg_flags; /* Additional flags */ - __u32 nlmsg_seq; /* Sequence number */ - __u32 nlmsg_pid; /* Sending process port ID */ + __u32 nlmsg_len; + __u16 nlmsg_type; + __u16 nlmsg_flags; + __u32 nlmsg_seq; + __u32 nlmsg_pid; }; /* Flags values */ @@ -54,7 +62,7 @@ struct nlmsghdr { #define NLM_F_REQUEST 0x01 /* It is request message. */ #define NLM_F_MULTI 0x02 /* Multipart message, terminated by NLMSG_DONE */ #define NLM_F_ACK 0x04 /* Reply with ack, with zero or error code */ -#define NLM_F_ECHO 0x08 /* Echo this request */ +#define NLM_F_ECHO 0x08 /* Receive resulting notifications */ #define NLM_F_DUMP_INTR 0x10 /* Dump was inconsistent due to sequence change */ #define NLM_F_DUMP_FILTERED 0x20 /* Dump was filtered as requested */ @@ -72,6 +80,7 @@ struct nlmsghdr { /* Modifiers to DELETE request */ #define NLM_F_NONREC 0x100 /* Do not delete recursively */ +#define NLM_F_BULK 0x200 /* Delete multiple objects */ /* Flags for ACK message */ #define NLM_F_CAPPED 0x100 /* request was capped */ @@ -91,9 +100,10 @@ struct nlmsghdr { #define NLMSG_HDRLEN ((int) NLMSG_ALIGN(sizeof(struct nlmsghdr))) #define NLMSG_LENGTH(len) ((len) + NLMSG_HDRLEN) #define NLMSG_SPACE(len) NLMSG_ALIGN(NLMSG_LENGTH(len)) -#define NLMSG_DATA(nlh) ((void*)(((char*)nlh) + NLMSG_LENGTH(0))) +#define NLMSG_DATA(nlh) ((void *)(((char *)nlh) + NLMSG_HDRLEN)) #define NLMSG_NEXT(nlh,len) ((len) -= NLMSG_ALIGN((nlh)->nlmsg_len), \ - (struct nlmsghdr*)(((char*)(nlh)) + NLMSG_ALIGN((nlh)->nlmsg_len))) + (struct nlmsghdr *)(((char *)(nlh)) + \ + NLMSG_ALIGN((nlh)->nlmsg_len))) #define NLMSG_OK(nlh,len) ((len) >= (int)sizeof(struct nlmsghdr) && \ (nlh)->nlmsg_len >= sizeof(struct nlmsghdr) && \ (nlh)->nlmsg_len <= (len)) @@ -130,6 +140,10 @@ struct nlmsgerr { * be used - in the success case - to identify a created * object or operation or similar (binary) * @NLMSGERR_ATTR_POLICY: policy for a rejected attribute + * @NLMSGERR_ATTR_MISS_TYPE: type of a missing required attribute, + * %NLMSGERR_ATTR_MISS_NEST will not be present if the attribute was + * missing at the message level + * @NLMSGERR_ATTR_MISS_NEST: offset of the nest where attribute was missing * @__NLMSGERR_ATTR_MAX: number of attributes * @NLMSGERR_ATTR_MAX: highest attribute number */ @@ -139,6 +153,8 @@ enum nlmsgerr_attrs { NLMSGERR_ATTR_OFFS, NLMSGERR_ATTR_COOKIE, NLMSGERR_ATTR_POLICY, + NLMSGERR_ATTR_MISS_TYPE, + NLMSGERR_ATTR_MISS_NEST, __NLMSGERR_ATTR_MAX, NLMSGERR_ATTR_MAX = __NLMSGERR_ATTR_MAX - 1 @@ -331,6 +347,9 @@ enum netlink_attribute_type { * bitfield32 type (U32) * @NL_POLICY_TYPE_ATTR_MASK: mask of valid bits for unsigned integers (U64) * @NL_POLICY_TYPE_ATTR_PAD: pad attribute for 64-bit alignment + * + * @__NL_POLICY_TYPE_ATTR_MAX: number of attributes + * @NL_POLICY_TYPE_ATTR_MAX: highest attribute number */ enum netlink_policy_type_attr { NL_POLICY_TYPE_ATTR_UNSPEC, diff --git a/linux-headers/include/linux/nexthop.h b/linux-headers/include/linux/nexthop.h index b0a5613905e..37b14b4ea6c 100644 --- a/linux-headers/include/linux/nexthop.h +++ b/linux-headers/include/linux/nexthop.h @@ -21,7 +21,10 @@ struct nexthop_grp { }; enum { - NEXTHOP_GRP_TYPE_MPATH, /* default type if not specified */ + NEXTHOP_GRP_TYPE_MPATH, /* hash-threshold nexthop group + * default type if not specified + */ + NEXTHOP_GRP_TYPE_RES, /* resilient nexthop group */ __NEXTHOP_GRP_TYPE_MAX, }; @@ -52,8 +55,50 @@ enum { NHA_FDB, /* flag; nexthop belongs to a bridge fdb */ /* if NHA_FDB is added, OIF, BLACKHOLE, ENCAP cannot be set */ + /* nested; resilient nexthop group attributes */ + NHA_RES_GROUP, + /* nested; nexthop bucket attributes */ + NHA_RES_BUCKET, + __NHA_MAX, }; #define NHA_MAX (__NHA_MAX - 1) + +enum { + NHA_RES_GROUP_UNSPEC, + /* Pad attribute for 64-bit alignment. */ + NHA_RES_GROUP_PAD = NHA_RES_GROUP_UNSPEC, + + /* u16; number of nexthop buckets in a resilient nexthop group */ + NHA_RES_GROUP_BUCKETS, + /* clock_t as u32; nexthop bucket idle timer (per-group) */ + NHA_RES_GROUP_IDLE_TIMER, + /* clock_t as u32; nexthop unbalanced timer */ + NHA_RES_GROUP_UNBALANCED_TIMER, + /* clock_t as u64; nexthop unbalanced time */ + NHA_RES_GROUP_UNBALANCED_TIME, + + __NHA_RES_GROUP_MAX, +}; + +#define NHA_RES_GROUP_MAX (__NHA_RES_GROUP_MAX - 1) + +enum { + NHA_RES_BUCKET_UNSPEC, + /* Pad attribute for 64-bit alignment. */ + NHA_RES_BUCKET_PAD = NHA_RES_BUCKET_UNSPEC, + + /* u16; nexthop bucket index */ + NHA_RES_BUCKET_INDEX, + /* clock_t as u64; nexthop bucket idle time */ + NHA_RES_BUCKET_IDLE_TIME, + /* u32; nexthop id assigned to the nexthop bucket */ + NHA_RES_BUCKET_NH_ID, + + __NHA_RES_BUCKET_MAX, +}; + +#define NHA_RES_BUCKET_MAX (__NHA_RES_BUCKET_MAX - 1) + #endif diff --git a/linux-headers/include/linux/nfc.h b/linux-headers/include/linux/nfc.h index f6e3c8c9c74..4fa4e979e94 100644 --- a/linux-headers/include/linux/nfc.h +++ b/linux-headers/include/linux/nfc.h @@ -263,7 +263,7 @@ enum nfc_sdp_attr { #define NFC_SE_ENABLED 0x1 struct sockaddr_nfc { - sa_family_t sa_family; + __kernel_sa_family_t sa_family; __u32 dev_idx; __u32 target_idx; __u32 nfc_protocol; @@ -271,14 +271,14 @@ struct sockaddr_nfc { #define NFC_LLCP_MAX_SERVICE_NAME 63 struct sockaddr_nfc_llcp { - sa_family_t sa_family; + __kernel_sa_family_t sa_family; __u32 dev_idx; __u32 target_idx; __u32 nfc_protocol; __u8 dsap; /* Destination SAP, if known */ __u8 ssap; /* Source SAP to be bound to */ char service_name[NFC_LLCP_MAX_SERVICE_NAME]; /* Service name URI */; - size_t service_name_len; + __kernel_size_t service_name_len; }; /* NFC socket protocols */ diff --git a/linux-headers/include/linux/nfs3.h b/linux-headers/include/linux/nfs3.h index 7164bd7fb51..0acbfa3cc63 100644 --- a/linux-headers/include/linux/nfs3.h +++ b/linux-headers/include/linux/nfs3.h @@ -63,6 +63,12 @@ enum nfs3_ftype { NF3BAD = 8 }; +enum nfs3_time_how { + DONT_CHANGE = 0, + SET_TO_SERVER_TIME = 1, + SET_TO_CLIENT_TIME = 2, +}; + struct nfs3_fh { unsigned short size; unsigned char data[NFS3_FHSIZE]; diff --git a/linux-headers/include/linux/nfs4.h b/linux-headers/include/linux/nfs4.h index 47ab27dc6f9..f783d798c19 100644 --- a/linux-headers/include/linux/nfs4.h +++ b/linux-headers/include/linux/nfs4.h @@ -45,6 +45,7 @@ #define NFS4_OPEN_RESULT_CONFIRM 0x0002 #define NFS4_OPEN_RESULT_LOCKTYPE_POSIX 0x0004 +#define NFS4_OPEN_RESULT_PRESERVE_UNLINKED 0x0008 #define NFS4_OPEN_RESULT_MAY_NOTIFY_LOCK 0x0020 #define NFS4_SHARE_ACCESS_MASK 0x000F @@ -178,9 +179,3 @@ #define NFS4_MAX_BACK_CHANNEL_OPS 2 #endif /* _LINUX_NFS4_H */ - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/linux-headers/include/linux/nfs_fs.h b/linux-headers/include/linux/nfs_fs.h index 8e6f8c1e603..4ca36eacaf5 100644 --- a/linux-headers/include/linux/nfs_fs.h +++ b/linux-headers/include/linux/nfs_fs.h @@ -52,7 +52,7 @@ #define NFSDBG_CALLBACK 0x0100 #define NFSDBG_CLIENT 0x0200 #define NFSDBG_MOUNT 0x0400 -#define NFSDBG_FSCACHE 0x0800 +#define NFSDBG_FSCACHE 0x0800 /* unused */ #define NFSDBG_PNFS 0x1000 #define NFSDBG_PNFS_LD 0x2000 #define NFSDBG_STATE 0x4000 diff --git a/linux-headers/include/linux/nfsd/export.h b/linux-headers/include/linux/nfsd/export.h index 8f37e89b263..ad884938d7f 100644 --- a/linux-headers/include/linux/nfsd/export.h +++ b/linux-headers/include/linux/nfsd/export.h @@ -62,5 +62,18 @@ | NFSEXP_ALLSQUASH \ | NFSEXP_INSECURE_PORT) +/* + * Transport layer security policies that are permitted to access + * an export + */ +#define NFSEXP_XPRTSEC_NONE 0x0001 +#define NFSEXP_XPRTSEC_TLS 0x0002 +#define NFSEXP_XPRTSEC_MTLS 0x0004 + +#define NFSEXP_XPRTSEC_NUM (3) + +#define NFSEXP_XPRTSEC_ALL (NFSEXP_XPRTSEC_NONE | \ + NFSEXP_XPRTSEC_TLS | \ + NFSEXP_XPRTSEC_MTLS) #endif /* NFSD_EXPORT_H */ diff --git a/linux-headers/include/linux/nfsd/nfsfh.h b/linux-headers/include/linux/nfsd/nfsfh.h deleted file mode 100644 index ab2eefab507..00000000000 --- a/linux-headers/include/linux/nfsd/nfsfh.h +++ /dev/null @@ -1,105 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * This file describes the layout of the file handles as passed - * over the wire. - * - * Copyright (C) 1995, 1996, 1997 Olaf Kirch - */ - -#ifndef _LINUX_NFSD_FH_H -#define _LINUX_NFSD_FH_H - -#include -#include -#include -#include -#include - -/* - * This is the old "dentry style" Linux NFSv2 file handle. - * - * The xino and xdev fields are currently used to transport the - * ino/dev of the exported inode. - */ -struct nfs_fhbase_old { - __u32 fb_dcookie; /* dentry cookie - always 0xfeebbaca */ - __u32 fb_ino; /* our inode number */ - __u32 fb_dirino; /* dir inode number, 0 for directories */ - __u32 fb_dev; /* our device */ - __u32 fb_xdev; - __u32 fb_xino; - __u32 fb_generation; -}; - -/* - * This is the new flexible, extensible style NFSv2/v3/v4 file handle. - * by Neil Brown - March 2000 - * - * The file handle starts with a sequence of four-byte words. - * The first word contains a version number (1) and three descriptor bytes - * that tell how the remaining 3 variable length fields should be handled. - * These three bytes are auth_type, fsid_type and fileid_type. - * - * All four-byte values are in host-byte-order. - * - * The auth_type field is deprecated and must be set to 0. - * - * The fsid_type identifies how the filesystem (or export point) is - * encoded. - * Current values: - * 0 - 4 byte device id (ms-2-bytes major, ls-2-bytes minor), 4byte inode number - * NOTE: we cannot use the kdev_t device id value, because kdev_t.h - * says we mustn't. We must break it up and reassemble. - * 1 - 4 byte user specified identifier - * 2 - 4 byte major, 4 byte minor, 4 byte inode number - DEPRECATED - * 3 - 4 byte device id, encoded for user-space, 4 byte inode number - * 4 - 4 byte inode number and 4 byte uuid - * 5 - 8 byte uuid - * 6 - 16 byte uuid - * 7 - 8 byte inode number and 16 byte uuid - * - * The fileid_type identified how the file within the filesystem is encoded. - * The values for this field are filesystem specific, exccept that - * filesystems must not use the values '0' or '0xff'. 'See enum fid_type' - * in include/linux/exportfs.h for currently registered values. - */ -struct nfs_fhbase_new { - __u8 fb_version; /* == 1, even => nfs_fhbase_old */ - __u8 fb_auth_type; - __u8 fb_fsid_type; - __u8 fb_fileid_type; - __u32 fb_auth[1]; -/* __u32 fb_fsid[0]; floating */ -/* __u32 fb_fileid[0]; floating */ -}; - -struct knfsd_fh { - unsigned int fh_size; /* significant for NFSv3. - * Points to the current size while building - * a new file handle - */ - union { - struct nfs_fhbase_old fh_old; - __u32 fh_pad[NFS4_FHSIZE/4]; - struct nfs_fhbase_new fh_new; - } fh_base; -}; - -#define ofh_dcookie fh_base.fh_old.fb_dcookie -#define ofh_ino fh_base.fh_old.fb_ino -#define ofh_dirino fh_base.fh_old.fb_dirino -#define ofh_dev fh_base.fh_old.fb_dev -#define ofh_xdev fh_base.fh_old.fb_xdev -#define ofh_xino fh_base.fh_old.fb_xino -#define ofh_generation fh_base.fh_old.fb_generation - -#define fh_version fh_base.fh_new.fb_version -#define fh_fsid_type fh_base.fh_new.fb_fsid_type -#define fh_auth_type fh_base.fh_new.fb_auth_type -#define fh_fileid_type fh_base.fh_new.fb_fileid_type -#define fh_fsid fh_base.fh_new.fb_auth - -/* Do not use, provided for userspace compatiblity. */ -#define fh_auth fh_base.fh_new.fb_auth - -#endif /* _LINUX_NFSD_FH_H */ diff --git a/linux-headers/include/linux/nitro_enclaves.h b/linux-headers/include/linux/nitro_enclaves.h index 744198de52c..9ab553beef5 100644 --- a/linux-headers/include/linux/nitro_enclaves.h +++ b/linux-headers/include/linux/nitro_enclaves.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ /* - * Copyright 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * Copyright 2020-2021 Amazon.com, Inc. or its affiliates. All Rights Reserved. */ #ifndef _LINUX_NITRO_ENCLAVES_H_ @@ -60,7 +60,7 @@ * * Context: Process context. * Return: - * * 0 - Logic succesfully completed. + * * 0 - Logic successfully completed. * * -1 - There was a failure in the ioctl logic. * On failure, errno is set to: * * EFAULT - copy_from_user() / copy_to_user() failure. @@ -95,7 +95,7 @@ * * Context: Process context. * Return: - * * 0 - Logic succesfully completed. + * * 0 - Logic successfully completed. * * -1 - There was a failure in the ioctl logic. * On failure, errno is set to: * * EFAULT - copy_from_user() / copy_to_user() failure. @@ -118,7 +118,7 @@ * * Context: Process context. * Return: - * * 0 - Logic succesfully completed. + * * 0 - Logic successfully completed. * * -1 - There was a failure in the ioctl logic. * On failure, errno is set to: * * EFAULT - copy_from_user() failure. @@ -161,7 +161,7 @@ * * Context: Process context. * Return: - * * 0 - Logic succesfully completed. + * * 0 - Logic successfully completed. * * -1 - There was a failure in the ioctl logic. * On failure, errno is set to: * * EFAULT - copy_from_user() / copy_to_user() failure. diff --git a/linux-headers/include/linux/nl80211-vnd-intel.h b/linux-headers/include/linux/nl80211-vnd-intel.h new file mode 100644 index 00000000000..4ed7d0b2451 --- /dev/null +++ b/linux-headers/include/linux/nl80211-vnd-intel.h @@ -0,0 +1,106 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Copyright (C) 2012-2014, 2018-2021 Intel Corporation + * Copyright (C) 2013-2015 Intel Mobile Communications GmbH + * Copyright (C) 2016-2017 Intel Deutschland GmbH + */ +#ifndef __VENDOR_CMD_INTEL_H__ +#define __VENDOR_CMD_INTEL_H__ + +#define INTEL_OUI 0x001735 + +/** + * enum iwl_mvm_vendor_cmd - supported vendor commands + * @IWL_MVM_VENDOR_CMD_GET_CSME_CONN_INFO: reports CSME connection info. + * @IWL_MVM_VENDOR_CMD_HOST_GET_OWNERSHIP: asks for ownership on the device. + * This is useful when the CSME firmware owns the device and the kernel + * wants to use it. In case the CSME firmware has no connection active the + * kernel will manage on its own to get ownership of the device. + * When the CSME firmware has an active connection, the user space + * involvement is required. The kernel will assert the RFKILL signal with + * the "device not owned" reason so that nobody can touch the device. Then + * the user space can run the following flow to be able to get connected + * to the very same AP the CSME firmware is currently connected to: + * + * 1) The user space (NetworkManager) boots and sees that the device is + * in RFKILL because the host doesn't own the device + * 2) The user space asks the kernel what AP the CSME firmware is + * connected to (with %IWL_MVM_VENDOR_CMD_GET_CSME_CONN_INFO) + * 3) The user space checks if it has a profile that matches the reply + * from the CSME firmware + * 4) The user space installs a network to the wpa_supplicant with a + * specific BSSID and a specific frequency + * 5) The user space prevents any type of full scan + * 6) The user space asks iwlmei to request ownership on the device (with + * this command) + * 7) iwlmei requests ownership from the CSME firmware + * 8) The CSME firmware grants ownership + * 9) iwlmei tells iwlwifi to lift the RFKILL + * 10) RFKILL OFF is reported to user space + * 11) The host boots the device, loads the firwmare, and connects to a + * specific BSSID without scanning including IP as fast as it can + * 12) The host reports to the CSME firmware that there is a connection + * 13) The TCP connection is preserved and the host has connectivity + * + * @IWL_MVM_VENDOR_CMD_ROAMING_FORBIDDEN_EVENT: notifies if roaming is allowed. + * It contains a &IWL_MVM_VENDOR_ATTR_ROAMING_FORBIDDEN and a + * &IWL_MVM_VENDOR_ATTR_VIF_ADDR attributes. + */ + +enum iwl_mvm_vendor_cmd { + IWL_MVM_VENDOR_CMD_GET_CSME_CONN_INFO = 0x2d, + IWL_MVM_VENDOR_CMD_HOST_GET_OWNERSHIP = 0x30, + IWL_MVM_VENDOR_CMD_ROAMING_FORBIDDEN_EVENT = 0x32, +}; + +enum iwl_vendor_auth_akm_mode { + IWL_VENDOR_AUTH_OPEN, + IWL_VENDOR_AUTH_RSNA = 0x6, + IWL_VENDOR_AUTH_RSNA_PSK, + IWL_VENDOR_AUTH_SAE = 0x9, + IWL_VENDOR_AUTH_MAX, +}; + +/** + * enum iwl_mvm_vendor_attr - attributes used in vendor commands + * @__IWL_MVM_VENDOR_ATTR_INVALID: attribute 0 is invalid + * @IWL_MVM_VENDOR_ATTR_VIF_ADDR: interface MAC address + * @IWL_MVM_VENDOR_ATTR_ADDR: MAC address + * @IWL_MVM_VENDOR_ATTR_SSID: SSID (binary attribute, 0..32 octets) + * @IWL_MVM_VENDOR_ATTR_STA_CIPHER: the cipher to use for the station with the + * mac address specified in &IWL_MVM_VENDOR_ATTR_ADDR. + * @IWL_MVM_VENDOR_ATTR_ROAMING_FORBIDDEN: u8 attribute. Indicates whether + * roaming is forbidden or not. Value 1 means roaming is forbidden, + * 0 mean roaming is allowed. + * @IWL_MVM_VENDOR_ATTR_AUTH_MODE: u32 attribute. Authentication mode type + * as specified in &enum iwl_vendor_auth_akm_mode. + * @IWL_MVM_VENDOR_ATTR_CHANNEL_NUM: u8 attribute. Contains channel number. + * @IWL_MVM_VENDOR_ATTR_BAND: u8 attribute. + * 0 for 2.4 GHz band, 1 for 5.2GHz band and 2 for 6GHz band. + * @IWL_MVM_VENDOR_ATTR_COLLOC_CHANNEL: u32 attribute. Channel number of + * collocated AP. Relevant for 6GHz AP info. + * @IWL_MVM_VENDOR_ATTR_COLLOC_ADDR: MAC address of a collocated AP. + * Relevant for 6GHz AP info. + * + * @NUM_IWL_MVM_VENDOR_ATTR: number of vendor attributes + * @MAX_IWL_MVM_VENDOR_ATTR: highest vendor attribute number + + */ +enum iwl_mvm_vendor_attr { + __IWL_MVM_VENDOR_ATTR_INVALID = 0x00, + IWL_MVM_VENDOR_ATTR_VIF_ADDR = 0x02, + IWL_MVM_VENDOR_ATTR_ADDR = 0x0a, + IWL_MVM_VENDOR_ATTR_SSID = 0x3d, + IWL_MVM_VENDOR_ATTR_STA_CIPHER = 0x51, + IWL_MVM_VENDOR_ATTR_ROAMING_FORBIDDEN = 0x64, + IWL_MVM_VENDOR_ATTR_AUTH_MODE = 0x65, + IWL_MVM_VENDOR_ATTR_CHANNEL_NUM = 0x66, + IWL_MVM_VENDOR_ATTR_BAND = 0x69, + IWL_MVM_VENDOR_ATTR_COLLOC_CHANNEL = 0x70, + IWL_MVM_VENDOR_ATTR_COLLOC_ADDR = 0x71, + + NUM_IWL_MVM_VENDOR_ATTR, + MAX_IWL_MVM_VENDOR_ATTR = NUM_IWL_MVM_VENDOR_ATTR - 1, +}; + +#endif /* __VENDOR_CMD_INTEL_H__ */ diff --git a/linux-headers/include/linux/nl80211.h b/linux-headers/include/linux/nl80211.h index 47700a2b9af..88eb85c6302 100644 --- a/linux-headers/include/linux/nl80211.h +++ b/linux-headers/include/linux/nl80211.h @@ -11,7 +11,7 @@ * Copyright 2008 Jouni Malinen * Copyright 2008 Colin McCabe * Copyright 2015-2017 Intel Deutschland GmbH - * Copyright (C) 2018-2020 Intel Corporation + * Copyright (C) 2018-2023 Intel Corporation * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -300,6 +300,40 @@ * the interface goes down. */ +/** + * DOC: FILS shared key crypto offload + * + * This feature is applicable to drivers running in AP mode. + * + * FILS shared key crypto offload can be advertised by drivers by setting + * @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD flag. The drivers that support + * FILS shared key crypto offload should be able to encrypt and decrypt + * association frames for FILS shared key authentication as per IEEE 802.11ai. + * With this capability, for FILS key derivation, drivers depend on userspace. + * + * After FILS key derivation, userspace shares the FILS AAD details with the + * driver and the driver stores the same to use in decryption of association + * request and in encryption of association response. The below parameters + * should be given to the driver in %NL80211_CMD_SET_FILS_AAD. + * %NL80211_ATTR_MAC - STA MAC address, used for storing FILS AAD per STA + * %NL80211_ATTR_FILS_KEK - Used for encryption or decryption + * %NL80211_ATTR_FILS_NONCES - Used for encryption or decryption + * (STA Nonce 16 bytes followed by AP Nonce 16 bytes) + * + * Once the association is done, the driver cleans the FILS AAD data. + */ + +/** + * DOC: Multi-Link Operation + * + * In Multi-Link Operation, a connection between to MLDs utilizes multiple + * links. To use this in nl80211, various commands and responses now need + * to or will include the new %NL80211_ATTR_MLO_LINKS attribute. + * Additionally, various commands that need to operate on a specific link + * now need to be given the %NL80211_ATTR_MLO_LINK_ID attribute, e.g. to + * use %NL80211_CMD_START_AP or similar functions. + */ + /** * enum nl80211_commands - supported nl80211 commands * @@ -337,17 +371,28 @@ * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from * userspace to request deletion of a virtual interface, then requires - * attribute %NL80211_ATTR_IFINDEX. + * attribute %NL80211_ATTR_IFINDEX. If multiple BSSID advertisements are + * enabled using %NL80211_ATTR_MBSSID_CONFIG, %NL80211_ATTR_MBSSID_ELEMS, + * and if this command is used for the transmitting interface, then all + * the non-transmitting interfaces are deleted as well. * * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified - * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. + * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. %NL80211_ATTR_MAC + * represents peer's MLD address for MLO pairwise key. For MLO group key, + * the link is identified by %NL80211_ATTR_MLO_LINK_ID. * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT, * %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD. + * For MLO connection, the link to set default key is identified by + * %NL80211_ATTR_MLO_LINK_ID. * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA, * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER, - * and %NL80211_ATTR_KEY_SEQ attributes. + * and %NL80211_ATTR_KEY_SEQ attributes. %NL80211_ATTR_MAC represents + * peer's MLD address for MLO pairwise key. The link to add MLO + * group key is identified by %NL80211_ATTR_MLO_LINK_ID. * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX - * or %NL80211_ATTR_MAC. + * or %NL80211_ATTR_MAC. %NL80211_ATTR_MAC represents peer's MLD address + * for MLO pairwise key. The link to delete group key is identified by + * %NL80211_ATTR_MLO_LINK_ID. * * @NL80211_CMD_GET_BEACON: (not used) * @NL80211_CMD_SET_BEACON: change the beacon on an access point interface @@ -379,7 +424,8 @@ * interface identified by %NL80211_ATTR_IFINDEX. * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC * or, if no MAC address given, all stations, on the interface identified - * by %NL80211_ATTR_IFINDEX. %NL80211_ATTR_MGMT_SUBTYPE and + * by %NL80211_ATTR_IFINDEX. For MLD station, MLD address is used in + * %NL80211_ATTR_MAC. %NL80211_ATTR_MGMT_SUBTYPE and * %NL80211_ATTR_REASON_CODE can optionally be used to specify which type * of disconnection indication should be sent to the station * (Deauthentication or Disassociation frame and reason code for that @@ -655,6 +701,9 @@ * When a security association was established on an 802.1X network using * fast transition, this event should be followed by an * %NL80211_CMD_PORT_AUTHORIZED event. + * Following a %NL80211_CMD_ROAM event userspace can issue + * %NL80211_CMD_GET_SCAN in order to obtain the scan information for the + * new BSS the card/driver roamed to. * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify * userspace that a connection was dropped by the AP or due to other * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and @@ -724,6 +773,13 @@ * %NL80211_ATTR_CSA_C_OFFSETS_TX is an array of offsets to CSA * counters which will be updated to the current value. This attribute * is used during CSA period. + * For TX on an MLD, the frequency can be omitted and the link ID be + * specified, or if transmitting to a known peer MLD (with MLD addresses + * in the frame) both can be omitted and the link will be selected by + * lower layers. + * For RX notification, %NL80211_ATTR_RX_HW_TIMESTAMP may be included to + * indicate the frame RX timestamp and %NL80211_ATTR_TX_HW_TIMESTAMP may + * be included to indicate the ack TX timestamp. * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this * command may be used with the corresponding cookie to cancel the wait * time if it is known that it is no longer necessary. This command is @@ -734,7 +790,9 @@ * transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies * the TX command and %NL80211_ATTR_FRAME includes the contents of the * frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged - * the frame. + * the frame. %NL80211_ATTR_TX_HW_TIMESTAMP may be included to indicate the + * tx timestamp and %NL80211_ATTR_RX_HW_TIMESTAMP may be included to + * indicate the ack RX timestamp. * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for * backward compatibility. * @@ -757,7 +815,8 @@ * of any other interfaces, and other interfaces will again take * precedence when they are used. * - * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface. + * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface + * (no longer supported). * * @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform * multicast to unicast conversion. When enabled, all multicast packets @@ -1078,6 +1137,12 @@ * has been received. %NL80211_ATTR_FRAME is used to specify the * frame contents. The frame is the raw EAPoL data, without ethernet or * 802.11 headers. + * For an MLD transmitter, the %NL80211_ATTR_MLO_LINK_ID may be given and + * its effect will depend on the destination: If the destination is known + * to be an MLD, this will be used as a hint to select the link to transmit + * the frame on. If the destination is not an MLD, this will select both + * the link to transmit on and the source address will be set to the link + * address of that link. * When used as an event indication %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT and %NL80211_ATTR_MAC are added * indicating the protocol type of the received frame; whether the frame @@ -1102,6 +1167,23 @@ * %NL80211_ATTR_STATUS_CODE attribute in %NL80211_CMD_EXTERNAL_AUTH * command interface. * + * Host driver sends MLD address of the AP with %NL80211_ATTR_MLD_ADDR in + * %NL80211_CMD_EXTERNAL_AUTH event to indicate user space to enable MLO + * during the authentication offload in STA mode while connecting to MLD + * APs. Host driver should check %NL80211_ATTR_MLO_SUPPORT flag capability + * in %NL80211_CMD_CONNECT to know whether the user space supports enabling + * MLO during the authentication offload or not. + * User space should enable MLO during the authentication only when it + * receives the AP MLD address in authentication offload request. User + * space shouldn't enable MLO when the authentication offload request + * doesn't indicate the AP MLD address even if the AP is MLO capable. + * User space should use %NL80211_ATTR_MLD_ADDR as peer's MLD address and + * interface address identified by %NL80211_ATTR_IFINDEX as self MLD + * address. User space and host driver to use MLD addresses in RA, TA and + * BSSID fields of the frames between them, and host driver translates the + * MLD addresses to/from link addresses based on the link chosen for the + * authentication. + * * Host driver reports this status on an authentication failure to the * user space through the connect result as the user space would have * initiated the connection through the connect request. @@ -1177,6 +1259,61 @@ * includes the contents of the frame. %NL80211_ATTR_ACK flag is included * if the recipient acknowledged the frame. * + * @NL80211_CMD_SET_SAR_SPECS: SAR power limitation configuration is + * passed using %NL80211_ATTR_SAR_SPEC. %NL80211_ATTR_WIPHY is used to + * specify the wiphy index to be applied to. + * + * @NL80211_CMD_OBSS_COLOR_COLLISION: This notification is sent out whenever + * mac80211/drv detects a bss color collision. + * + * @NL80211_CMD_COLOR_CHANGE_REQUEST: This command is used to indicate that + * userspace wants to change the BSS color. + * + * @NL80211_CMD_COLOR_CHANGE_STARTED: Notify userland, that a color change has + * started + * + * @NL80211_CMD_COLOR_CHANGE_ABORTED: Notify userland, that the color change has + * been aborted + * + * @NL80211_CMD_COLOR_CHANGE_COMPLETED: Notify userland that the color change + * has completed + * + * @NL80211_CMD_SET_FILS_AAD: Set FILS AAD data to the driver using - + * &NL80211_ATTR_MAC - for STA MAC address + * &NL80211_ATTR_FILS_KEK - for KEK + * &NL80211_ATTR_FILS_NONCES - for FILS Nonces + * (STA Nonce 16 bytes followed by AP Nonce 16 bytes) + * + * @NL80211_CMD_ASSOC_COMEBACK: notification about an association + * temporal rejection with comeback. The event includes %NL80211_ATTR_MAC + * to describe the BSSID address of the AP and %NL80211_ATTR_TIMEOUT to + * specify the timeout value. + * + * @NL80211_CMD_ADD_LINK: Add a new link to an interface. The + * %NL80211_ATTR_MLO_LINK_ID attribute is used for the new link. + * @NL80211_CMD_REMOVE_LINK: Remove a link from an interface. This may come + * without %NL80211_ATTR_MLO_LINK_ID as an easy way to remove all links + * in preparation for e.g. roaming to a regular (non-MLO) AP. + * + * @NL80211_CMD_ADD_LINK_STA: Add a link to an MLD station + * @NL80211_CMD_MODIFY_LINK_STA: Modify a link of an MLD station + * @NL80211_CMD_REMOVE_LINK_STA: Remove a link of an MLD station + * + * @NL80211_CMD_SET_HW_TIMESTAMP: Enable/disable HW timestamping of Timing + * measurement and Fine timing measurement frames. If %NL80211_ATTR_MAC + * is included, enable/disable HW timestamping only for frames to/from the + * specified MAC address. Otherwise enable/disable HW timestamping for + * all TM/FTM frames (including ones that were enabled with specific MAC + * address). If %NL80211_ATTR_HW_TIMESTAMP_ENABLED is not included, disable + * HW timestamping. + * The number of peers that HW timestamping can be enabled for concurrently + * is indicated by %NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS. + * + * @NL80211_CMD_LINKS_REMOVED: Notify userspace about the removal of STA MLD + * setup links due to AP MLD removing the corresponding affiliated APs with + * Multi-Link reconfiguration. %NL80211_ATTR_MLO_LINKS is used to provide + * information about the removed STA MLD setup links. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1407,6 +1544,31 @@ enum nl80211_commands { NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS, + NL80211_CMD_SET_SAR_SPECS, + + NL80211_CMD_OBSS_COLOR_COLLISION, + + NL80211_CMD_COLOR_CHANGE_REQUEST, + + NL80211_CMD_COLOR_CHANGE_STARTED, + NL80211_CMD_COLOR_CHANGE_ABORTED, + NL80211_CMD_COLOR_CHANGE_COMPLETED, + + NL80211_CMD_SET_FILS_AAD, + + NL80211_CMD_ASSOC_COMEBACK, + + NL80211_CMD_ADD_LINK, + NL80211_CMD_REMOVE_LINK, + + NL80211_CMD_ADD_LINK_STA, + NL80211_CMD_MODIFY_LINK_STA, + NL80211_CMD_REMOVE_LINK_STA, + + NL80211_CMD_SET_HW_TIMESTAMP, + + NL80211_CMD_LINKS_REMOVED, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1750,8 +1912,9 @@ enum nl80211_commands { * specify just a single bitrate, which is to be used for the beacon. * The driver must also specify support for this with the extended * features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY, - * NL80211_EXT_FEATURE_BEACON_RATE_HT and - * NL80211_EXT_FEATURE_BEACON_RATE_VHT. + * NL80211_EXT_FEATURE_BEACON_RATE_HT, + * NL80211_EXT_FEATURE_BEACON_RATE_VHT and + * NL80211_EXT_FEATURE_BEACON_RATE_HE. * * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain * at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME. @@ -1955,8 +2118,15 @@ enum nl80211_commands { * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire * probe-response frame. The DA field in the 802.11 header is zero-ed out, * to be filled by the FW. - * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable - * this feature. Currently, only supported in mac80211 drivers. + * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable + * this feature during association. This is a flag attribute. + * Currently only supported in mac80211 drivers. + * @NL80211_ATTR_DISABLE_VHT: Force VHT capable interfaces to disable + * this feature during association. This is a flag attribute. + * Currently only supported in mac80211 drivers. + * @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable + * this feature during association. This is a flag attribute. + * Currently only supported in mac80211 drivers. * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the * ATTR_HT_CAPABILITY to which attention should be paid. * Currently, only mac80211 NICs support this feature. @@ -2077,7 +2247,8 @@ enum nl80211_commands { * until the channel switch event. * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission * must be blocked on the current channel (before the channel switch - * operation). + * operation). Also included in the channel switch started event if quiet + * was requested by the AP. * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information * for the time while performing a channel switch. * @NL80211_ATTR_CNTDWN_OFFS_BEACON: An array of offsets (u16) to the channel @@ -2257,8 +2428,10 @@ enum nl80211_commands { * * @NL80211_ATTR_IFTYPE_EXT_CAPA: Nested attribute of the following attributes: * %NL80211_ATTR_IFTYPE, %NL80211_ATTR_EXT_CAPA, - * %NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities per - * interface type. + * %NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities and + * other interface-type specific capabilities per interface type. For MLO, + * %NL80211_ATTR_EML_CAPABILITY and %NL80211_ATTR_MLD_CAPA_AND_OPS are + * present. * * @NL80211_ATTR_MU_MIMO_GROUP_DATA: array of 24 bytes that defines a MU-MIMO * groupID for monitor mode. @@ -2394,7 +2567,9 @@ enum nl80211_commands { * space supports external authentication. This attribute shall be used * with %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP request. The driver * may offload authentication processing to user space if this capability - * is indicated in the respective requests from the user space. + * is indicated in the respective requests from the user space. (This flag + * attribute deprecated for %NL80211_CMD_START_AP, use + * %NL80211_ATTR_AP_SETTINGS_FLAGS) * * @NL80211_ATTR_NSS: Station's New/updated RX_NSS value notified using this * u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED. @@ -2527,6 +2702,119 @@ enum nl80211_commands { * override mask. Used with NL80211_ATTR_S1G_CAPABILITY in * NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT. * + * @NL80211_ATTR_SAE_PWE: Indicates the mechanism(s) allowed for SAE PWE + * derivation in WPA3-Personal networks which are using SAE authentication. + * This is a u8 attribute that encapsulates one of the values from + * &enum nl80211_sae_pwe_mechanism. + * + * @NL80211_ATTR_SAR_SPEC: SAR power limitation specification when + * used with %NL80211_CMD_SET_SAR_SPECS. The message contains fields + * of %nl80211_sar_attrs which specifies the sar type and related + * sar specs. Sar specs contains array of %nl80211_sar_specs_attrs. + * + * @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and + * disassoc events to indicate that an immediate reconnect to the AP + * is desired. + * + * @NL80211_ATTR_OBSS_COLOR_BITMAP: bitmap of the u64 BSS colors for the + * %NL80211_CMD_OBSS_COLOR_COLLISION event. + * + * @NL80211_ATTR_COLOR_CHANGE_COUNT: u8 attribute specifying the number of TBTT's + * until the color switch event. + * @NL80211_ATTR_COLOR_CHANGE_COLOR: u8 attribute specifying the color that we are + * switching to + * @NL80211_ATTR_COLOR_CHANGE_ELEMS: Nested set of attributes containing the IE + * information for the time while performing a color switch. + * + * @NL80211_ATTR_MBSSID_CONFIG: Nested attribute for multiple BSSID + * advertisements (MBSSID) parameters in AP mode. + * Kernel uses this attribute to indicate the driver's support for MBSSID + * and enhanced multi-BSSID advertisements (EMA AP) to the userspace. + * Userspace should use this attribute to configure per interface MBSSID + * parameters. + * See &enum nl80211_mbssid_config_attributes for details. + * + * @NL80211_ATTR_MBSSID_ELEMS: Nested parameter to pass multiple BSSID elements. + * Mandatory parameter for the transmitting interface to enable MBSSID. + * Optional for the non-transmitting interfaces. + * + * @NL80211_ATTR_RADAR_BACKGROUND: Configure dedicated offchannel chain + * available for radar/CAC detection on some hw. This chain can't be used + * to transmit or receive frames and it is bounded to a running wdev. + * Background radar/CAC detection allows to avoid the CAC downtime + * switching on a different channel during CAC detection on the selected + * radar channel. + * + * @NL80211_ATTR_AP_SETTINGS_FLAGS: u32 attribute contains ap settings flags, + * enumerated in &enum nl80211_ap_settings_flags. This attribute shall be + * used with %NL80211_CMD_START_AP request. + * + * @NL80211_ATTR_EHT_CAPABILITY: EHT Capability information element (from + * association request when used with NL80211_CMD_NEW_STATION). Can be set + * only if %NL80211_STA_FLAG_WME is set. + * + * @NL80211_ATTR_MLO_LINK_ID: A (u8) link ID for use with MLO, to be used with + * various commands that need a link ID to operate. + * @NL80211_ATTR_MLO_LINKS: A nested array of links, each containing some + * per-link information and a link ID. + * @NL80211_ATTR_MLD_ADDR: An MLD address, used with various commands such as + * authenticate/associate. + * + * @NL80211_ATTR_MLO_SUPPORT: Flag attribute to indicate user space supports MLO + * connection. Used with %NL80211_CMD_CONNECT. If this attribute is not + * included in NL80211_CMD_CONNECT drivers must not perform MLO connection. + * + * @NL80211_ATTR_MAX_NUM_AKM_SUITES: U16 attribute. Indicates maximum number of + * AKM suites allowed for %NL80211_CMD_CONNECT, %NL80211_CMD_ASSOCIATE and + * %NL80211_CMD_START_AP in %NL80211_CMD_GET_WIPHY response. If this + * attribute is not present userspace shall consider maximum number of AKM + * suites allowed as %NL80211_MAX_NR_AKM_SUITES which is the legacy maximum + * number prior to the introduction of this attribute. + * + * @NL80211_ATTR_EML_CAPABILITY: EML Capability information (u16) + * @NL80211_ATTR_MLD_CAPA_AND_OPS: MLD Capabilities and Operations (u16) + * + * @NL80211_ATTR_TX_HW_TIMESTAMP: Hardware timestamp for TX operation in + * nanoseconds (u64). This is the device clock timestamp so it will + * probably reset when the device is stopped or the firmware is reset. + * When used with %NL80211_CMD_FRAME_TX_STATUS, indicates the frame TX + * timestamp. When used with %NL80211_CMD_FRAME RX notification, indicates + * the ack TX timestamp. + * @NL80211_ATTR_RX_HW_TIMESTAMP: Hardware timestamp for RX operation in + * nanoseconds (u64). This is the device clock timestamp so it will + * probably reset when the device is stopped or the firmware is reset. + * When used with %NL80211_CMD_FRAME_TX_STATUS, indicates the ack RX + * timestamp. When used with %NL80211_CMD_FRAME RX notification, indicates + * the incoming frame RX timestamp. + * @NL80211_ATTR_TD_BITMAP: Transition Disable bitmap, for subsequent + * (re)associations. + * + * @NL80211_ATTR_PUNCT_BITMAP: (u32) Preamble puncturing bitmap, lowest + * bit corresponds to the lowest 20 MHz channel. Each bit set to 1 + * indicates that the sub-channel is punctured. Higher 16 bits are + * reserved. + * + * @NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS: Maximum number of peers that HW + * timestamping can be enabled for concurrently (u16), a wiphy attribute. + * A value of 0xffff indicates setting for all peers (i.e. not specifying + * an address with %NL80211_CMD_SET_HW_TIMESTAMP) is supported. + * @NL80211_ATTR_HW_TIMESTAMP_ENABLED: Indicates whether HW timestamping should + * be enabled or not (flag attribute). + * + * @NL80211_ATTR_EMA_RNR_ELEMS: Optional nested attribute for + * reduced neighbor report (RNR) elements. This attribute can be used + * only when NL80211_MBSSID_CONFIG_ATTR_EMA is enabled. + * Userspace is responsible for splitting the RNR into multiple + * elements such that each element excludes the non-transmitting + * profiles already included in the MBSSID element + * (%NL80211_ATTR_MBSSID_ELEMS) at the same index. Each EMA beacon + * will be generated by adding MBSSID and RNR elements at the same + * index. If the userspace includes more RNR elements than number of + * MBSSID elements then these will be added in every EMA beacon. + * + * @NL80211_ATTR_MLO_LINK_DISABLED: Flag attribute indicating that the link is + * disabled. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -3016,6 +3304,55 @@ enum nl80211_attrs { NL80211_ATTR_S1G_CAPABILITY, NL80211_ATTR_S1G_CAPABILITY_MASK, + NL80211_ATTR_SAE_PWE, + + NL80211_ATTR_RECONNECT_REQUESTED, + + NL80211_ATTR_SAR_SPEC, + + NL80211_ATTR_DISABLE_HE, + + NL80211_ATTR_OBSS_COLOR_BITMAP, + + NL80211_ATTR_COLOR_CHANGE_COUNT, + NL80211_ATTR_COLOR_CHANGE_COLOR, + NL80211_ATTR_COLOR_CHANGE_ELEMS, + + NL80211_ATTR_MBSSID_CONFIG, + NL80211_ATTR_MBSSID_ELEMS, + + NL80211_ATTR_RADAR_BACKGROUND, + + NL80211_ATTR_AP_SETTINGS_FLAGS, + + NL80211_ATTR_EHT_CAPABILITY, + + NL80211_ATTR_DISABLE_EHT, + + NL80211_ATTR_MLO_LINKS, + NL80211_ATTR_MLO_LINK_ID, + NL80211_ATTR_MLD_ADDR, + + NL80211_ATTR_MLO_SUPPORT, + + NL80211_ATTR_MAX_NUM_AKM_SUITES, + + NL80211_ATTR_EML_CAPABILITY, + NL80211_ATTR_MLD_CAPA_AND_OPS, + + NL80211_ATTR_TX_HW_TIMESTAMP, + NL80211_ATTR_RX_HW_TIMESTAMP, + NL80211_ATTR_TD_BITMAP, + + NL80211_ATTR_PUNCT_BITMAP, + + NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS, + NL80211_ATTR_HW_TIMESTAMP_ENABLED, + + NL80211_ATTR_EMA_RNR_ELEMS, + + NL80211_ATTR_MLO_LINK_DISABLED, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3070,7 +3407,14 @@ enum nl80211_attrs { #define NL80211_HE_MIN_CAPABILITY_LEN 16 #define NL80211_HE_MAX_CAPABILITY_LEN 54 #define NL80211_MAX_NR_CIPHER_SUITES 5 + +/* + * NL80211_MAX_NR_AKM_SUITES is obsolete when %NL80211_ATTR_MAX_NUM_AKM_SUITES + * present in %NL80211_CMD_GET_WIPHY response. + */ #define NL80211_MAX_NR_AKM_SUITES 2 +#define NL80211_EHT_MIN_CAPABILITY_LEN 13 +#define NL80211_EHT_MAX_CAPABILITY_LEN 51 #define NL80211_MIN_REMAIN_ON_CHANNEL_TIME 10 @@ -3098,7 +3442,7 @@ enum nl80211_attrs { * and therefore can't be created in the normal ways, use the * %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE * commands to create and destroy one - * @NL80211_IF_TYPE_OCB: Outside Context of a BSS + * @NL80211_IFTYPE_OCB: Outside Context of a BSS * This mode corresponds to the MIB variable dot11OCBActivated=true * @NL80211_IFTYPE_NAN: NAN device interface type (not a netdev) * @NL80211_IFTYPE_MAX: highest interface type number currently defined @@ -3239,6 +3583,56 @@ enum nl80211_he_ru_alloc { NL80211_RATE_INFO_HE_RU_ALLOC_2x996, }; +/** + * enum nl80211_eht_gi - EHT guard interval + * @NL80211_RATE_INFO_EHT_GI_0_8: 0.8 usec + * @NL80211_RATE_INFO_EHT_GI_1_6: 1.6 usec + * @NL80211_RATE_INFO_EHT_GI_3_2: 3.2 usec + */ +enum nl80211_eht_gi { + NL80211_RATE_INFO_EHT_GI_0_8, + NL80211_RATE_INFO_EHT_GI_1_6, + NL80211_RATE_INFO_EHT_GI_3_2, +}; + +/** + * enum nl80211_eht_ru_alloc - EHT RU allocation values + * @NL80211_RATE_INFO_EHT_RU_ALLOC_26: 26-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_52: 52-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_52P26: 52+26-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_106: 106-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_106P26: 106+26 tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_242: 242-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_484: 484-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_484P242: 484+242 tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_996: 996-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_996P484: 996+484 tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_996P484P242: 996+484+242 tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_2x996: 2x996-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_2x996P484: 2x996+484 tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_3x996: 3x996-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_3x996P484: 3x996+484 tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_4x996: 4x996-tone RU allocation + */ +enum nl80211_eht_ru_alloc { + NL80211_RATE_INFO_EHT_RU_ALLOC_26, + NL80211_RATE_INFO_EHT_RU_ALLOC_52, + NL80211_RATE_INFO_EHT_RU_ALLOC_52P26, + NL80211_RATE_INFO_EHT_RU_ALLOC_106, + NL80211_RATE_INFO_EHT_RU_ALLOC_106P26, + NL80211_RATE_INFO_EHT_RU_ALLOC_242, + NL80211_RATE_INFO_EHT_RU_ALLOC_484, + NL80211_RATE_INFO_EHT_RU_ALLOC_484P242, + NL80211_RATE_INFO_EHT_RU_ALLOC_996, + NL80211_RATE_INFO_EHT_RU_ALLOC_996P484, + NL80211_RATE_INFO_EHT_RU_ALLOC_996P484P242, + NL80211_RATE_INFO_EHT_RU_ALLOC_2x996, + NL80211_RATE_INFO_EHT_RU_ALLOC_2x996P484, + NL80211_RATE_INFO_EHT_RU_ALLOC_3x996, + NL80211_RATE_INFO_EHT_RU_ALLOC_3x996P484, + NL80211_RATE_INFO_EHT_RU_ALLOC_4x996, +}; + /** * enum nl80211_rate_info - bitrate information * @@ -3278,6 +3672,20 @@ enum nl80211_he_ru_alloc { * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1) * @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then * non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc) + * @NL80211_RATE_INFO_320_MHZ_WIDTH: 320 MHz bitrate + * @NL80211_RATE_INFO_EHT_MCS: EHT MCS index (u8, 0-15) + * @NL80211_RATE_INFO_EHT_NSS: EHT NSS value (u8, 1-8) + * @NL80211_RATE_INFO_EHT_GI: EHT guard interval identifier + * (u8, see &enum nl80211_eht_gi) + * @NL80211_RATE_INFO_EHT_RU_ALLOC: EHT RU allocation, if not present then + * non-OFDMA was used (u8, see &enum nl80211_eht_ru_alloc) + * @NL80211_RATE_INFO_S1G_MCS: S1G MCS index (u8, 0-10) + * @NL80211_RATE_INFO_S1G_NSS: S1G NSS value (u8, 1-4) + * @NL80211_RATE_INFO_1_MHZ_WIDTH: 1 MHz S1G rate + * @NL80211_RATE_INFO_2_MHZ_WIDTH: 2 MHz S1G rate + * @NL80211_RATE_INFO_4_MHZ_WIDTH: 4 MHz S1G rate + * @NL80211_RATE_INFO_8_MHZ_WIDTH: 8 MHz S1G rate + * @NL80211_RATE_INFO_16_MHZ_WIDTH: 16 MHz S1G rate * @__NL80211_RATE_INFO_AFTER_LAST: internal use */ enum nl80211_rate_info { @@ -3299,6 +3707,18 @@ enum nl80211_rate_info { NL80211_RATE_INFO_HE_GI, NL80211_RATE_INFO_HE_DCM, NL80211_RATE_INFO_HE_RU_ALLOC, + NL80211_RATE_INFO_320_MHZ_WIDTH, + NL80211_RATE_INFO_EHT_MCS, + NL80211_RATE_INFO_EHT_NSS, + NL80211_RATE_INFO_EHT_GI, + NL80211_RATE_INFO_EHT_RU_ALLOC, + NL80211_RATE_INFO_S1G_MCS, + NL80211_RATE_INFO_S1G_NSS, + NL80211_RATE_INFO_1_MHZ_WIDTH, + NL80211_RATE_INFO_2_MHZ_WIDTH, + NL80211_RATE_INFO_4_MHZ_WIDTH, + NL80211_RATE_INFO_8_MHZ_WIDTH, + NL80211_RATE_INFO_16_MHZ_WIDTH, /* keep last */ __NL80211_RATE_INFO_AFTER_LAST, @@ -3609,11 +4029,20 @@ enum nl80211_mpath_info { * capabilities IE * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE: HE PPE thresholds information as * defined in HE capabilities IE - * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently - * defined * @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities (__le16), * given for all 6 GHz band channels + * @NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS: vendor element capabilities that are + * advertised on this band/for this iftype (binary) + * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC: EHT MAC capabilities as in EHT + * capabilities element + * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY: EHT PHY capabilities as in EHT + * capabilities element + * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET: EHT supported NSS/MCS as in EHT + * capabilities element + * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE: EHT PPE thresholds information as + * defined in EHT capabilities element * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use + * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band attribute currently defined */ enum nl80211_band_iftype_attr { __NL80211_BAND_IFTYPE_ATTR_INVALID, @@ -3624,6 +4053,11 @@ enum nl80211_band_iftype_attr { NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET, NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE, NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA, + NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS, + NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC, + NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY, + NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET, + NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE, /* keep last */ __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST, @@ -3653,6 +4087,10 @@ enum nl80211_band_iftype_attr { * @NL80211_BAND_ATTR_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes * the allowed channel bandwidth configurations. * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13. + * @NL80211_BAND_ATTR_S1G_MCS_NSS_SET: S1G capabilities, supported S1G-MCS and NSS + * set subfield, as in the S1G information IE, 5 bytes + * @NL80211_BAND_ATTR_S1G_CAPA: S1G capabilities information subfield as in the + * S1G information IE, 10 bytes * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined * @__NL80211_BAND_ATTR_AFTER_LAST: internal use */ @@ -3673,6 +4111,9 @@ enum nl80211_band_attr { NL80211_BAND_ATTR_EDMG_CHANNELS, NL80211_BAND_ATTR_EDMG_BW_CONFIG, + NL80211_BAND_ATTR_S1G_MCS_NSS_SET, + NL80211_BAND_ATTR_S1G_CAPA, + /* keep last */ __NL80211_BAND_ATTR_AFTER_LAST, NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 @@ -3768,6 +4209,10 @@ enum nl80211_wmm_rule { * on this channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_16MHZ: 16 MHz operation is allowed * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_NO_320MHZ: any 320 MHz channel using this channel + * as the primary or any of the secondary channels isn't possible + * @NL80211_FREQUENCY_ATTR_NO_EHT: EHT operation is not allowed on this channel + * in current regulatory domain. * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -3804,6 +4249,8 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_4MHZ, NL80211_FREQUENCY_ATTR_8MHZ, NL80211_FREQUENCY_ATTR_16MHZ, + NL80211_FREQUENCY_ATTR_NO_320MHZ, + NL80211_FREQUENCY_ATTR_NO_EHT, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -4002,6 +4449,8 @@ enum nl80211_sched_scan_match_attr { * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed * @NL80211_RRF_NO_HE: HE operation not allowed + * @NL80211_RRF_NO_320MHZ: 320MHz operation not allowed + * @NL80211_RRF_NO_EHT: EHT operation not allowed */ enum nl80211_reg_rule_flags { NL80211_RRF_NO_OFDM = 1<<0, @@ -4020,6 +4469,8 @@ enum nl80211_reg_rule_flags { NL80211_RRF_NO_80MHZ = 1<<15, NL80211_RRF_NO_160MHZ = 1<<16, NL80211_RRF_NO_HE = 1<<17, + NL80211_RRF_NO_320MHZ = 1<<18, + NL80211_RRF_NO_EHT = 1<<19, }; #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR @@ -4517,6 +4968,8 @@ enum nl80211_key_mode { * @NL80211_CHAN_WIDTH_4: 4 MHz OFDM channel * @NL80211_CHAN_WIDTH_8: 8 MHz OFDM channel * @NL80211_CHAN_WIDTH_16: 16 MHz OFDM channel + * @NL80211_CHAN_WIDTH_320: 320 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 + * attribute must be provided as well */ enum nl80211_chan_width { NL80211_CHAN_WIDTH_20_NOHT, @@ -4532,6 +4985,7 @@ enum nl80211_chan_width { NL80211_CHAN_WIDTH_4, NL80211_CHAN_WIDTH_8, NL80211_CHAN_WIDTH_16, + NL80211_CHAN_WIDTH_320, }; /** @@ -4603,6 +5057,8 @@ enum nl80211_bss_scan_width { * Contains a nested array of signal strength attributes (u8, dBm), * using the nesting index as the antenna number. * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz + * @NL80211_BSS_MLO_LINK_ID: MLO link ID of the BSS (u8). + * @NL80211_BSS_MLD_ADDR: MLD address of this BSS if connected to it. * @__NL80211_BSS_AFTER_LAST: internal * @NL80211_BSS_MAX: highest BSS attribute */ @@ -4628,6 +5084,8 @@ enum nl80211_bss { NL80211_BSS_PARENT_BSSID, NL80211_BSS_CHAIN_SIGNAL, NL80211_BSS_FREQUENCY_OFFSET, + NL80211_BSS_MLO_LINK_ID, + NL80211_BSS_MLD_ADDR, /* keep last */ __NL80211_BSS_AFTER_LAST, @@ -4846,6 +5304,7 @@ enum nl80211_txrate_gi { * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz) * @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz) * @NL80211_BAND_S1GHZ: around 900MHz, supported by S1G PHYs + * @NL80211_BAND_LC: light communication band (placeholder) * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace * since newer kernel versions may support more bands */ @@ -4855,6 +5314,7 @@ enum nl80211_band { NL80211_BAND_60GHZ, NL80211_BAND_6GHZ, NL80211_BAND_S1GHZ, + NL80211_BAND_LC, NUM_NL80211_BANDS, }; @@ -5421,7 +5881,7 @@ enum nl80211_iface_limit_attrs { * => allows 8 of AP/GO that can have BI gcd >= min gcd * * numbers = [ #{STA} <= 2 ], channels = 2, max = 2 - * => allows two STAs on different channels + * => allows two STAs on the same or on different channels * * numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4 * => allows a STA plus three P2P interfaces @@ -5466,7 +5926,7 @@ enum nl80211_if_combination_attrs { * @NL80211_PLINK_ESTAB: mesh peer link is established * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh - * plink are discarded + * plink are discarded, except for authentication frames * @NUM_NL80211_PLINK_STATES: number of peer link states * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states */ @@ -5505,6 +5965,7 @@ enum plink_actions { #define NL80211_KEK_LEN 16 #define NL80211_KCK_EXT_LEN 24 #define NL80211_KEK_EXT_LEN 32 +#define NL80211_KCK_EXT_LEN_32 32 #define NL80211_REPLAY_CTR_LEN 8 /** @@ -5603,13 +6064,15 @@ enum nl80211_tdls_operation { NL80211_TDLS_DISABLE_LINK, }; -/* +/** * enum nl80211_ap_sme_features - device-integrated AP features - * Reserved for future use, no bits are defined in - * NL80211_ATTR_DEVICE_AP_SME yet. + * @NL80211_AP_SME_SA_QUERY_OFFLOAD: SA Query procedures offloaded to driver + * when user space indicates support for SA Query procedures offload during + * "start ap" with %NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT. + */ enum nl80211_ap_sme_features { + NL80211_AP_SME_SA_QUERY_OFFLOAD = 1 << 0, }; - */ /** * enum nl80211_feature_flags - device/driver features @@ -5620,7 +6083,7 @@ enum nl80211_ap_sme_features { * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up * the connected inactive stations in AP mode. * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested - * to work properly to suppport receiving regulatory hints from + * to work properly to support receiving regulatory hints from * cellular base stations. * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: (no longer available, only * here to reserve the value for API/ABI compatibility) @@ -5896,6 +6359,47 @@ enum nl80211_feature_flags { * @NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP: Driver/device supports * unsolicited broadcast probe response transmission * + * @NL80211_EXT_FEATURE_BEACON_RATE_HE: Driver supports beacon rate + * configuration (AP/mesh) with HE rates. + * + * @NL80211_EXT_FEATURE_SECURE_LTF: Device supports secure LTF measurement + * exchange protocol. + * + * @NL80211_EXT_FEATURE_SECURE_RTT: Device supports secure RTT measurement + * exchange protocol. + * + * @NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE: Device supports management + * frame protection for all management frames exchanged during the + * negotiation and range measurement procedure. + * + * @NL80211_EXT_FEATURE_BSS_COLOR: The driver supports BSS color collision + * detection and change announcemnts. + * + * @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD: Driver running in AP mode supports + * FILS encryption and decryption for (Re)Association Request and Response + * frames. Userspace has to share FILS AAD details to the driver by using + * @NL80211_CMD_SET_FILS_AAD. + * + * @NL80211_EXT_FEATURE_RADAR_BACKGROUND: Device supports background radar/CAC + * detection. + * + * @NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE: Device can perform a MAC address + * change without having to bring the underlying network device down + * first. For example, in station mode this can be used to vary the + * origin MAC address prior to a connection to a new AP for privacy + * or other reasons. Note that certain driver specific restrictions + * might apply, e.g. no scans in progress, no offchannel operations + * in progress, and no active connections. + * + * @NL80211_EXT_FEATURE_PUNCT: Driver supports preamble puncturing in AP mode. + * + * @NL80211_EXT_FEATURE_SECURE_NAN: Device supports NAN Pairing which enables + * authentication, data encryption and message integrity. + * + * @NL80211_EXT_FEATURE_AUTH_AND_DEAUTH_RANDOM_TA: Device supports randomized TA + * in authentication and deauthentication frames sent to unassociated peer + * using @NL80211_CMD_FRAME. + * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ @@ -5956,6 +6460,17 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_SAE_OFFLOAD_AP, NL80211_EXT_FEATURE_FILS_DISCOVERY, NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP, + NL80211_EXT_FEATURE_BEACON_RATE_HE, + NL80211_EXT_FEATURE_SECURE_LTF, + NL80211_EXT_FEATURE_SECURE_RTT, + NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE, + NL80211_EXT_FEATURE_BSS_COLOR, + NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD, + NL80211_EXT_FEATURE_RADAR_BACKGROUND, + NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE, + NL80211_EXT_FEATURE_PUNCT, + NL80211_EXT_FEATURE_SECURE_NAN, + NL80211_EXT_FEATURE_AUTH_AND_DEAUTH_RANDOM_TA, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, @@ -6070,8 +6585,16 @@ enum nl80211_timeout_reason { * @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with * %NL80211_ATTR_SCAN_FREQ_KHZ. This also means * %NL80211_ATTR_SCAN_FREQUENCIES will not be included. - * @NL80211_SCAN_FLAG_COLOCATED_6GHZ: scan for colocated APs reported by - * 2.4/5 GHz APs + * @NL80211_SCAN_FLAG_COLOCATED_6GHZ: scan for collocated APs reported by + * 2.4/5 GHz APs. When the flag is set, the scan logic will use the + * information from the RNR element found in beacons/probe responses + * received on the 2.4/5 GHz channels to actively scan only the 6GHz + * channels on which APs are expected to be found. Note that when not set, + * the scan logic would scan all 6GHz channels, but since transmission of + * probe requests on non PSC channels is limited, it is highly likely that + * these channels would passively be scanned. Also note that when the flag + * is set, in addition to the colocated APs, PSC channels would also be + * scanned if the user space has asked for it. */ enum nl80211_scan_flags { NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, @@ -6253,11 +6776,13 @@ struct nl80211_vendor_cmd_info { * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable. * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable. * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable. + * @NL80211_TDLS_PEER_HE: TDLS peer is HE capable. */ enum nl80211_tdls_peer_capability { NL80211_TDLS_PEER_HT = 1<<0, NL80211_TDLS_PEER_VHT = 1<<1, NL80211_TDLS_PEER_WMM = 1<<2, + NL80211_TDLS_PEER_HE = 1<<3, }; /** @@ -6849,6 +7374,12 @@ enum nl80211_peer_measurement_ftm_capa { * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based * ranging will be used. + * @NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK: negotiate for LMR feedback. Only + * valid if either %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED or + * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set. + * @NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR: optional. The BSS color of the + * responder. Only valid if %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED + * or %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED is set. * * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number @@ -6867,6 +7398,8 @@ enum nl80211_peer_measurement_ftm_req { NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC, NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED, NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED, + NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK, + NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR, /* keep last */ NUM_NL80211_PMSR_FTM_REQ_ATTR, @@ -7124,4 +7657,187 @@ enum nl80211_unsol_bcast_probe_resp_attributes { NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX = __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST - 1 }; + +/** + * enum nl80211_sae_pwe_mechanism - The mechanism(s) allowed for SAE PWE + * derivation. Applicable only when WPA3-Personal SAE authentication is + * used. + * + * @NL80211_SAE_PWE_UNSPECIFIED: not specified, used internally to indicate that + * attribute is not present from userspace. + * @NL80211_SAE_PWE_HUNT_AND_PECK: hunting-and-pecking loop only + * @NL80211_SAE_PWE_HASH_TO_ELEMENT: hash-to-element only + * @NL80211_SAE_PWE_BOTH: both hunting-and-pecking loop and hash-to-element + * can be used. + */ +enum nl80211_sae_pwe_mechanism { + NL80211_SAE_PWE_UNSPECIFIED, + NL80211_SAE_PWE_HUNT_AND_PECK, + NL80211_SAE_PWE_HASH_TO_ELEMENT, + NL80211_SAE_PWE_BOTH, +}; + +/** + * enum nl80211_sar_type - type of SAR specs + * + * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit + * + */ +enum nl80211_sar_type { + NL80211_SAR_TYPE_POWER, + + /* add new type here */ + + /* Keep last */ + NUM_NL80211_SAR_TYPE, +}; + +/** + * enum nl80211_sar_attrs - Attributes for SAR spec + * + * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type. + * + * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power + * limit specifications. Each specification contains a set + * of %nl80211_sar_specs_attrs. + * + * For SET operation, it contains array of %NL80211_SAR_ATTR_SPECS_POWER + * and %NL80211_SAR_ATTR_SPECS_RANGE_INDEX. + * + * For sar_capa dump, it contains array of + * %NL80211_SAR_ATTR_SPECS_START_FREQ + * and %NL80211_SAR_ATTR_SPECS_END_FREQ. + * + * @__NL80211_SAR_ATTR_LAST: Internal + * @NL80211_SAR_ATTR_MAX: highest sar attribute + * + * These attributes are used with %NL80211_CMD_SET_SAR_SPEC + */ +enum nl80211_sar_attrs { + __NL80211_SAR_ATTR_INVALID, + + NL80211_SAR_ATTR_TYPE, + NL80211_SAR_ATTR_SPECS, + + __NL80211_SAR_ATTR_LAST, + NL80211_SAR_ATTR_MAX = __NL80211_SAR_ATTR_LAST - 1, +}; + +/** + * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs + * + * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual + * power limit value in units of 0.25 dBm if type is + * NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm). + * 0 means userspace doesn't have SAR limitation on this associated range. + * + * @NL80211_SAR_ATTR_SPECS_RANGE_INDEX: Required (u32) value to specify the + * index of exported freq range table and the associated power limitation + * is applied to this range. + * + * Userspace isn't required to set all the ranges advertised by WLAN driver, + * and userspace can skip some certain ranges. These skipped ranges don't + * have SAR limitations, and they are same as setting the + * %NL80211_SAR_ATTR_SPECS_POWER to any unreasonable high value because any + * value higher than regulatory allowed value just means SAR power + * limitation is removed, but it's required to set at least one range. + * It's not allowed to set duplicated range in one SET operation. + * + * Every SET operation overwrites previous SET operation. + * + * @NL80211_SAR_ATTR_SPECS_START_FREQ: Required (u32) value to specify the start + * frequency of this range edge when registering SAR capability to wiphy. + * It's not a channel center frequency. The unit is kHz. + * + * @NL80211_SAR_ATTR_SPECS_END_FREQ: Required (u32) value to specify the end + * frequency of this range edge when registering SAR capability to wiphy. + * It's not a channel center frequency. The unit is kHz. + * + * @__NL80211_SAR_ATTR_SPECS_LAST: Internal + * @NL80211_SAR_ATTR_SPECS_MAX: highest sar specs attribute + */ +enum nl80211_sar_specs_attrs { + __NL80211_SAR_ATTR_SPECS_INVALID, + + NL80211_SAR_ATTR_SPECS_POWER, + NL80211_SAR_ATTR_SPECS_RANGE_INDEX, + NL80211_SAR_ATTR_SPECS_START_FREQ, + NL80211_SAR_ATTR_SPECS_END_FREQ, + + __NL80211_SAR_ATTR_SPECS_LAST, + NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST - 1, +}; + +/** + * enum nl80211_mbssid_config_attributes - multiple BSSID (MBSSID) and enhanced + * multi-BSSID advertisements (EMA) in AP mode. + * Kernel uses some of these attributes to advertise driver's support for + * MBSSID and EMA. + * Remaining attributes should be used by the userspace to configure the + * features. + * + * @__NL80211_MBSSID_CONFIG_ATTR_INVALID: Invalid + * + * @NL80211_MBSSID_CONFIG_ATTR_MAX_INTERFACES: Used by the kernel to advertise + * the maximum number of MBSSID interfaces supported by the driver. + * Driver should indicate MBSSID support by setting + * wiphy->mbssid_max_interfaces to a value more than or equal to 2. + * + * @NL80211_MBSSID_CONFIG_ATTR_MAX_EMA_PROFILE_PERIODICITY: Used by the kernel + * to advertise the maximum profile periodicity supported by the driver + * if EMA is enabled. Driver should indicate EMA support to the userspace + * by setting wiphy->ema_max_profile_periodicity to + * a non-zero value. + * + * @NL80211_MBSSID_CONFIG_ATTR_INDEX: Mandatory parameter to pass the index of + * this BSS (u8) in the multiple BSSID set. + * Value must be set to 0 for the transmitting interface and non-zero for + * all non-transmitting interfaces. The userspace will be responsible + * for using unique indices for the interfaces. + * Range: 0 to wiphy->mbssid_max_interfaces-1. + * + * @NL80211_MBSSID_CONFIG_ATTR_TX_IFINDEX: Mandatory parameter for + * a non-transmitted profile which provides the interface index (u32) of + * the transmitted profile. The value must match one of the interface + * indices advertised by the kernel. Optional if the interface being set up + * is the transmitting one, however, if provided then the value must match + * the interface index of the same. + * + * @NL80211_MBSSID_CONFIG_ATTR_EMA: Flag used to enable EMA AP feature. + * Setting this flag is permitted only if the driver advertises EMA support + * by setting wiphy->ema_max_profile_periodicity to non-zero. + * + * @__NL80211_MBSSID_CONFIG_ATTR_LAST: Internal + * @NL80211_MBSSID_CONFIG_ATTR_MAX: highest attribute + */ +enum nl80211_mbssid_config_attributes { + __NL80211_MBSSID_CONFIG_ATTR_INVALID, + + NL80211_MBSSID_CONFIG_ATTR_MAX_INTERFACES, + NL80211_MBSSID_CONFIG_ATTR_MAX_EMA_PROFILE_PERIODICITY, + NL80211_MBSSID_CONFIG_ATTR_INDEX, + NL80211_MBSSID_CONFIG_ATTR_TX_IFINDEX, + NL80211_MBSSID_CONFIG_ATTR_EMA, + + /* keep last */ + __NL80211_MBSSID_CONFIG_ATTR_LAST, + NL80211_MBSSID_CONFIG_ATTR_MAX = __NL80211_MBSSID_CONFIG_ATTR_LAST - 1, +}; + +/** + * enum nl80211_ap_settings_flags - AP settings flags + * + * @NL80211_AP_SETTINGS_EXTERNAL_AUTH_SUPPORT: AP supports external + * authentication. + * @NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT: Userspace supports SA Query + * procedures offload to driver. If driver advertises + * %NL80211_AP_SME_SA_QUERY_OFFLOAD in AP SME features, userspace shall + * ignore SA Query procedures and validations when this flag is set by + * userspace. + */ +enum nl80211_ap_settings_flags { + NL80211_AP_SETTINGS_EXTERNAL_AUTH_SUPPORT = 1 << 0, + NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT = 1 << 1, +}; + #endif /* __LINUX_NL80211_H */ diff --git a/linux-headers/include/linux/nvme_ioctl.h b/linux-headers/include/linux/nvme_ioctl.h index 2ebe5d600a2..f8df31dbc49 100644 --- a/linux-headers/include/linux/nvme_ioctl.h +++ b/linux-headers/include/linux/nvme_ioctl.h @@ -55,7 +55,10 @@ struct nvme_passthru_cmd64 { __u64 metadata; __u64 addr; __u32 metadata_len; - __u32 data_len; + union { + __u32 data_len; /* for non-vectored io */ + __u32 vec_cnt; /* for vectored io */ + }; __u32 cdw10; __u32 cdw11; __u32 cdw12; @@ -67,6 +70,28 @@ struct nvme_passthru_cmd64 { __u64 result; }; +/* same as struct nvme_passthru_cmd64, minus the 8b result field */ +struct nvme_uring_cmd { + __u8 opcode; + __u8 flags; + __u16 rsvd1; + __u32 nsid; + __u32 cdw2; + __u32 cdw3; + __u64 metadata; + __u64 addr; + __u32 metadata_len; + __u32 data_len; + __u32 cdw10; + __u32 cdw11; + __u32 cdw12; + __u32 cdw13; + __u32 cdw14; + __u32 cdw15; + __u32 timeout_ms; + __u32 rsvd2; +}; + #define nvme_admin_cmd nvme_passthru_cmd #define NVME_IOCTL_ID _IO('N', 0x40) @@ -78,5 +103,12 @@ struct nvme_passthru_cmd64 { #define NVME_IOCTL_RESCAN _IO('N', 0x46) #define NVME_IOCTL_ADMIN64_CMD _IOWR('N', 0x47, struct nvme_passthru_cmd64) #define NVME_IOCTL_IO64_CMD _IOWR('N', 0x48, struct nvme_passthru_cmd64) +#define NVME_IOCTL_IO64_CMD_VEC _IOWR('N', 0x49, struct nvme_passthru_cmd64) + +/* io_uring async commands: */ +#define NVME_URING_CMD_IO _IOWR('N', 0x80, struct nvme_uring_cmd) +#define NVME_URING_CMD_IO_VEC _IOWR('N', 0x81, struct nvme_uring_cmd) +#define NVME_URING_CMD_ADMIN _IOWR('N', 0x82, struct nvme_uring_cmd) +#define NVME_URING_CMD_ADMIN_VEC _IOWR('N', 0x83, struct nvme_uring_cmd) #endif /* _LINUX_NVME_IOCTL_H */ diff --git a/linux-headers/include/linux/omap3isp.h b/linux-headers/include/linux/omap3isp.h index e1b7f732f25..af5e5f51664 100644 --- a/linux-headers/include/linux/omap3isp.h +++ b/linux-headers/include/linux/omap3isp.h @@ -162,6 +162,7 @@ struct omap3isp_h3a_aewb_config { * struct omap3isp_stat_data - Statistic data sent to or received from user * @ts: Timestamp of returned framestats. * @buf: Pointer to pass to user. + * @buf_size: Size of buffer. * @frame_number: Frame number of requested stats. * @cur_frame: Current frame number being processed. * @config_counter: Number of the configuration associated with the data. @@ -169,10 +170,12 @@ struct omap3isp_h3a_aewb_config { struct omap3isp_stat_data { struct timeval ts; void *buf; - __u32 buf_size; - __u16 frame_number; - __u16 cur_frame; - __u16 config_counter; + __struct_group(/* no tag */, frame, /* no attrs */, + __u32 buf_size; + __u16 frame_number; + __u16 cur_frame; + __u16 config_counter; + ); }; diff --git a/linux-headers/include/linux/openat2.h b/linux-headers/include/linux/openat2.h index 159c5dbd5a3..4759c471676 100644 --- a/linux-headers/include/linux/openat2.h +++ b/linux-headers/include/linux/openat2.h @@ -35,5 +35,9 @@ struct open_how { #define RESOLVE_IN_ROOT 0x10 /* Make all jumps to "/" and ".." be scoped inside the dirfd (similar to chroot(2)). */ +#define RESOLVE_CACHED 0x20 /* Only complete if resolution can be + completed through cached lookup. May + return -EAGAIN if that's not + possible. */ #endif /* _LINUX_OPENAT2_H */ diff --git a/linux-headers/include/linux/openvswitch.h b/linux-headers/include/linux/openvswitch.h index d170a9f4a4b..fa1d08453f4 100644 --- a/linux-headers/include/linux/openvswitch.h +++ b/linux-headers/include/linux/openvswitch.h @@ -70,10 +70,14 @@ enum ovs_datapath_cmd { * set on the datapath port (for OVS_ACTION_ATTR_MISS). Only valid on * %OVS_DP_CMD_NEW requests. A value of zero indicates that upcalls should * not be sent. + * @OVS_DP_ATTR_PER_CPU_PIDS: Per-cpu array of PIDs for upcalls when + * OVS_DP_F_DISPATCH_UPCALL_PER_CPU feature is set. * @OVS_DP_ATTR_STATS: Statistics about packets that have passed through the * datapath. Always present in notifications. * @OVS_DP_ATTR_MEGAFLOW_STATS: Statistics about mega flow masks usage for the * datapath. Always present in notifications. + * @OVS_DP_ATTR_IFINDEX: Interface index for a new datapath netdev. Only + * valid for %OVS_DP_CMD_NEW requests. * * These attributes follow the &struct ovs_header within the Generic Netlink * payload for %OVS_DP_* commands. @@ -87,6 +91,10 @@ enum ovs_datapath_attr { OVS_DP_ATTR_USER_FEATURES, /* OVS_DP_F_* */ OVS_DP_ATTR_PAD, OVS_DP_ATTR_MASKS_CACHE_SIZE, + OVS_DP_ATTR_PER_CPU_PIDS, /* Netlink PIDS to receive upcalls in + * per-cpu dispatch mode + */ + OVS_DP_ATTR_IFINDEX, __OVS_DP_ATTR_MAX }; @@ -127,6 +135,9 @@ struct ovs_vport_stats { /* Allow tc offload recirc sharing */ #define OVS_DP_F_TC_RECIRC_SHARING (1 << 2) +/* Allow per-cpu dispatch of upcalls */ +#define OVS_DP_F_DISPATCH_UPCALL_PER_CPU (1 << 3) + /* Fixed logical ports. */ #define OVSP_LOCAL ((__u32)0) @@ -266,11 +277,25 @@ enum ovs_vport_attr { OVS_VPORT_ATTR_PAD, OVS_VPORT_ATTR_IFINDEX, OVS_VPORT_ATTR_NETNSID, + OVS_VPORT_ATTR_UPCALL_STATS, __OVS_VPORT_ATTR_MAX }; #define OVS_VPORT_ATTR_MAX (__OVS_VPORT_ATTR_MAX - 1) +/** + * enum ovs_vport_upcall_attr - attributes for %OVS_VPORT_UPCALL* commands + * @OVS_VPORT_UPCALL_SUCCESS: 64-bit upcall success packets. + * @OVS_VPORT_UPCALL_FAIL: 64-bit upcall fail packets. + */ +enum ovs_vport_upcall_attr { + OVS_VPORT_UPCALL_ATTR_SUCCESS, + OVS_VPORT_UPCALL_ATTR_FAIL, + __OVS_VPORT_UPCALL_ATTR_MAX +}; + +#define OVS_VPORT_UPCALL_ATTR_MAX (__OVS_VPORT_UPCALL_ATTR_MAX - 1) + enum { OVS_VXLAN_EXT_UNSPEC, OVS_VXLAN_EXT_GBP, /* Flag or __u32 */ @@ -344,6 +369,20 @@ enum ovs_key_attr { OVS_KEY_ATTR_CT_ORIG_TUPLE_IPV6, /* struct ovs_key_ct_tuple_ipv6 */ OVS_KEY_ATTR_NSH, /* Nested set of ovs_nsh_key_* */ + /* User space decided to squat on types 29 and 30. They are defined + * below, but should not be sent to the kernel. + * + * WARNING: No new types should be added unless they are defined + * for both kernel and user space (no 'ifdef's). It's hard + * to keep compatibility otherwise. + */ + OVS_KEY_ATTR_PACKET_TYPE, /* be32 packet type */ + OVS_KEY_ATTR_ND_EXTENSIONS, /* IPv6 Neighbor Discovery extensions */ + + OVS_KEY_ATTR_TUNNEL_INFO, /* struct ip_tunnel_info. + * For in-kernel use only. + */ + OVS_KEY_ATTR_IPV6_EXTHDRS, /* struct ovs_key_ipv6_exthdr */ __OVS_KEY_ATTR_MAX }; @@ -419,6 +458,11 @@ struct ovs_key_ipv6 { __u8 ipv6_frag; /* One of OVS_FRAG_TYPE_*. */ }; +/* separate structure to support backward compatibility with older user space */ +struct ovs_key_ipv6_exthdrs { + __u16 hdrs; +}; + struct ovs_key_tcp { __be16 tcp_src; __be16 tcp_dst; @@ -708,6 +752,7 @@ struct ovs_action_push_vlan { */ enum ovs_hash_alg { OVS_HASH_ALG_L4, + OVS_HASH_ALG_SYM_L4, }; /* @@ -892,6 +937,7 @@ enum ovs_check_pkt_len_attr { * start of the packet or at the start of the l3 header depending on the value * of l3 tunnel flag in the tun_flags field of OVS_ACTION_ATTR_ADD_MPLS * argument. + * @OVS_ACTION_ATTR_DROP: Explicit drop action. * * Only a single header can be set with a single %OVS_ACTION_ATTR_SET. Not all * fields within a header are modifiable, e.g. the IPv4 protocol and fragment @@ -929,6 +975,7 @@ enum ovs_action_attr { OVS_ACTION_ATTR_CHECK_PKT_LEN, /* Nested OVS_CHECK_PKT_LEN_ATTR_*. */ OVS_ACTION_ATTR_ADD_MPLS, /* struct ovs_action_add_mpls. */ OVS_ACTION_ATTR_DEC_TTL, /* Nested OVS_DEC_TTL_ATTR_*. */ + OVS_ACTION_ATTR_DROP, /* u32 error code. */ __OVS_ACTION_ATTR_MAX, /* Nothing past this will be accepted * from userspace. */ diff --git a/linux-headers/include/linux/parport.h b/linux-headers/include/linux/parport.h index 4cd4442730c..01d69a5ac8d 100644 --- a/linux-headers/include/linux/parport.h +++ b/linux-headers/include/linux/parport.h @@ -90,6 +90,9 @@ typedef enum { /* Flags for block transfer operations. */ #define PARPORT_EPP_FAST (1<<0) /* Unreliable counts. */ #define PARPORT_W91284PIC (1<<1) /* have a Warp9 w91284pic in the device */ +#define PARPORT_EPP_FAST_32 PARPORT_EPP_FAST /* 32-bit EPP transfers */ +#define PARPORT_EPP_FAST_16 (1<<2) /* 16-bit EPP transfers */ +#define PARPORT_EPP_FAST_8 (1<<3) /* 8-bit EPP transfers */ /* The rest is for the kernel only */ #endif /* _PARPORT_H_ */ diff --git a/linux-headers/include/linux/pci_regs.h b/linux-headers/include/linux/pci_regs.h index a95d55f9f25..e5f558d9649 100644 --- a/linux-headers/include/linux/pci_regs.h +++ b/linux-headers/include/linux/pci_regs.h @@ -301,23 +301,23 @@ #define PCI_SID_ESR_FIC 0x20 /* First In Chassis Flag */ #define PCI_SID_CHASSIS_NR 3 /* Chassis Number */ -/* Message Signalled Interrupt registers */ +/* Message Signaled Interrupt registers */ -#define PCI_MSI_FLAGS 2 /* Message Control */ +#define PCI_MSI_FLAGS 0x02 /* Message Control */ #define PCI_MSI_FLAGS_ENABLE 0x0001 /* MSI feature enabled */ #define PCI_MSI_FLAGS_QMASK 0x000e /* Maximum queue size available */ #define PCI_MSI_FLAGS_QSIZE 0x0070 /* Message queue size configured */ #define PCI_MSI_FLAGS_64BIT 0x0080 /* 64-bit addresses allowed */ #define PCI_MSI_FLAGS_MASKBIT 0x0100 /* Per-vector masking capable */ #define PCI_MSI_RFU 3 /* Rest of capability flags */ -#define PCI_MSI_ADDRESS_LO 4 /* Lower 32 bits */ -#define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */ -#define PCI_MSI_DATA_32 8 /* 16 bits of data for 32-bit devices */ -#define PCI_MSI_MASK_32 12 /* Mask bits register for 32-bit devices */ -#define PCI_MSI_PENDING_32 16 /* Pending intrs for 32-bit devices */ -#define PCI_MSI_DATA_64 12 /* 16 bits of data for 64-bit devices */ -#define PCI_MSI_MASK_64 16 /* Mask bits register for 64-bit devices */ -#define PCI_MSI_PENDING_64 20 /* Pending intrs for 64-bit devices */ +#define PCI_MSI_ADDRESS_LO 0x04 /* Lower 32 bits */ +#define PCI_MSI_ADDRESS_HI 0x08 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */ +#define PCI_MSI_DATA_32 0x08 /* 16 bits of data for 32-bit devices */ +#define PCI_MSI_MASK_32 0x0c /* Mask bits register for 32-bit devices */ +#define PCI_MSI_PENDING_32 0x10 /* Pending intrs for 32-bit devices */ +#define PCI_MSI_DATA_64 0x0c /* 16 bits of data for 64-bit devices */ +#define PCI_MSI_MASK_64 0x10 /* Mask bits register for 64-bit devices */ +#define PCI_MSI_PENDING_64 0x14 /* Pending intrs for 64-bit devices */ /* MSI-X registers (in MSI-X capability) */ #define PCI_MSIX_FLAGS 2 /* Message Control */ @@ -335,10 +335,10 @@ /* MSI-X Table entry format (in memory mapped by a BAR) */ #define PCI_MSIX_ENTRY_SIZE 16 -#define PCI_MSIX_ENTRY_LOWER_ADDR 0 /* Message Address */ -#define PCI_MSIX_ENTRY_UPPER_ADDR 4 /* Message Upper Address */ -#define PCI_MSIX_ENTRY_DATA 8 /* Message Data */ -#define PCI_MSIX_ENTRY_VECTOR_CTRL 12 /* Vector Control */ +#define PCI_MSIX_ENTRY_LOWER_ADDR 0x0 /* Message Address */ +#define PCI_MSIX_ENTRY_UPPER_ADDR 0x4 /* Message Upper Address */ +#define PCI_MSIX_ENTRY_DATA 0x8 /* Message Data */ +#define PCI_MSIX_ENTRY_VECTOR_CTRL 0xc /* Vector Control */ #define PCI_MSIX_ENTRY_CTRL_MASKBIT 0x00000001 /* CompactPCI Hotswap Register */ @@ -470,7 +470,7 @@ /* PCI Express capability registers */ -#define PCI_EXP_FLAGS 2 /* Capabilities register */ +#define PCI_EXP_FLAGS 0x02 /* Capabilities register */ #define PCI_EXP_FLAGS_VERS 0x000f /* Capability version */ #define PCI_EXP_FLAGS_TYPE 0x00f0 /* Device/Port type */ #define PCI_EXP_TYPE_ENDPOINT 0x0 /* Express Endpoint */ @@ -484,7 +484,7 @@ #define PCI_EXP_TYPE_RC_EC 0xa /* Root Complex Event Collector */ #define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */ #define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */ -#define PCI_EXP_DEVCAP 4 /* Device capabilities */ +#define PCI_EXP_DEVCAP 0x04 /* Device capabilities */ #define PCI_EXP_DEVCAP_PAYLOAD 0x00000007 /* Max_Payload_Size */ #define PCI_EXP_DEVCAP_PHANTOM 0x00000018 /* Phantom functions */ #define PCI_EXP_DEVCAP_EXT_TAG 0x00000020 /* Extended tags */ @@ -497,13 +497,19 @@ #define PCI_EXP_DEVCAP_PWR_VAL 0x03fc0000 /* Slot Power Limit Value */ #define PCI_EXP_DEVCAP_PWR_SCL 0x0c000000 /* Slot Power Limit Scale */ #define PCI_EXP_DEVCAP_FLR 0x10000000 /* Function Level Reset */ -#define PCI_EXP_DEVCTL 8 /* Device Control */ +#define PCI_EXP_DEVCTL 0x08 /* Device Control */ #define PCI_EXP_DEVCTL_CERE 0x0001 /* Correctable Error Reporting En. */ #define PCI_EXP_DEVCTL_NFERE 0x0002 /* Non-Fatal Error Reporting Enable */ #define PCI_EXP_DEVCTL_FERE 0x0004 /* Fatal Error Reporting Enable */ #define PCI_EXP_DEVCTL_URRE 0x0008 /* Unsupported Request Reporting En. */ #define PCI_EXP_DEVCTL_RELAX_EN 0x0010 /* Enable relaxed ordering */ #define PCI_EXP_DEVCTL_PAYLOAD 0x00e0 /* Max_Payload_Size */ +#define PCI_EXP_DEVCTL_PAYLOAD_128B 0x0000 /* 128 Bytes */ +#define PCI_EXP_DEVCTL_PAYLOAD_256B 0x0020 /* 256 Bytes */ +#define PCI_EXP_DEVCTL_PAYLOAD_512B 0x0040 /* 512 Bytes */ +#define PCI_EXP_DEVCTL_PAYLOAD_1024B 0x0060 /* 1024 Bytes */ +#define PCI_EXP_DEVCTL_PAYLOAD_2048B 0x0080 /* 2048 Bytes */ +#define PCI_EXP_DEVCTL_PAYLOAD_4096B 0x00a0 /* 4096 Bytes */ #define PCI_EXP_DEVCTL_EXT_TAG 0x0100 /* Extended Tag Field Enable */ #define PCI_EXP_DEVCTL_PHANTOM 0x0200 /* Phantom Functions Enable */ #define PCI_EXP_DEVCTL_AUX_PME 0x0400 /* Auxiliary Power PM Enable */ @@ -516,7 +522,7 @@ #define PCI_EXP_DEVCTL_READRQ_2048B 0x4000 /* 2048 Bytes */ #define PCI_EXP_DEVCTL_READRQ_4096B 0x5000 /* 4096 Bytes */ #define PCI_EXP_DEVCTL_BCR_FLR 0x8000 /* Bridge Configuration Retry / FLR */ -#define PCI_EXP_DEVSTA 10 /* Device Status */ +#define PCI_EXP_DEVSTA 0x0a /* Device Status */ #define PCI_EXP_DEVSTA_CED 0x0001 /* Correctable Error Detected */ #define PCI_EXP_DEVSTA_NFED 0x0002 /* Non-Fatal Error Detected */ #define PCI_EXP_DEVSTA_FED 0x0004 /* Fatal Error Detected */ @@ -524,13 +530,14 @@ #define PCI_EXP_DEVSTA_AUXPD 0x0010 /* AUX Power Detected */ #define PCI_EXP_DEVSTA_TRPND 0x0020 /* Transactions Pending */ #define PCI_CAP_EXP_RC_ENDPOINT_SIZEOF_V1 12 /* v1 endpoints without link end here */ -#define PCI_EXP_LNKCAP 12 /* Link Capabilities */ +#define PCI_EXP_LNKCAP 0x0c /* Link Capabilities */ #define PCI_EXP_LNKCAP_SLS 0x0000000f /* Supported Link Speeds */ #define PCI_EXP_LNKCAP_SLS_2_5GB 0x00000001 /* LNKCAP2 SLS Vector bit 0 */ #define PCI_EXP_LNKCAP_SLS_5_0GB 0x00000002 /* LNKCAP2 SLS Vector bit 1 */ #define PCI_EXP_LNKCAP_SLS_8_0GB 0x00000003 /* LNKCAP2 SLS Vector bit 2 */ #define PCI_EXP_LNKCAP_SLS_16_0GB 0x00000004 /* LNKCAP2 SLS Vector bit 3 */ #define PCI_EXP_LNKCAP_SLS_32_0GB 0x00000005 /* LNKCAP2 SLS Vector bit 4 */ +#define PCI_EXP_LNKCAP_SLS_64_0GB 0x00000006 /* LNKCAP2 SLS Vector bit 5 */ #define PCI_EXP_LNKCAP_MLW 0x000003f0 /* Maximum Link Width */ #define PCI_EXP_LNKCAP_ASPMS 0x00000c00 /* ASPM Support */ #define PCI_EXP_LNKCAP_ASPM_L0S 0x00000400 /* ASPM L0s Support */ @@ -542,7 +549,7 @@ #define PCI_EXP_LNKCAP_DLLLARC 0x00100000 /* Data Link Layer Link Active Reporting Capable */ #define PCI_EXP_LNKCAP_LBNC 0x00200000 /* Link Bandwidth Notification Capability */ #define PCI_EXP_LNKCAP_PN 0xff000000 /* Port Number */ -#define PCI_EXP_LNKCTL 16 /* Link Control */ +#define PCI_EXP_LNKCTL 0x10 /* Link Control */ #define PCI_EXP_LNKCTL_ASPMC 0x0003 /* ASPM Control */ #define PCI_EXP_LNKCTL_ASPM_L0S 0x0001 /* L0s Enable */ #define PCI_EXP_LNKCTL_ASPM_L1 0x0002 /* L1 Enable */ @@ -555,13 +562,14 @@ #define PCI_EXP_LNKCTL_HAWD 0x0200 /* Hardware Autonomous Width Disable */ #define PCI_EXP_LNKCTL_LBMIE 0x0400 /* Link Bandwidth Management Interrupt Enable */ #define PCI_EXP_LNKCTL_LABIE 0x0800 /* Link Autonomous Bandwidth Interrupt Enable */ -#define PCI_EXP_LNKSTA 18 /* Link Status */ +#define PCI_EXP_LNKSTA 0x12 /* Link Status */ #define PCI_EXP_LNKSTA_CLS 0x000f /* Current Link Speed */ #define PCI_EXP_LNKSTA_CLS_2_5GB 0x0001 /* Current Link Speed 2.5GT/s */ #define PCI_EXP_LNKSTA_CLS_5_0GB 0x0002 /* Current Link Speed 5.0GT/s */ #define PCI_EXP_LNKSTA_CLS_8_0GB 0x0003 /* Current Link Speed 8.0GT/s */ #define PCI_EXP_LNKSTA_CLS_16_0GB 0x0004 /* Current Link Speed 16.0GT/s */ #define PCI_EXP_LNKSTA_CLS_32_0GB 0x0005 /* Current Link Speed 32.0GT/s */ +#define PCI_EXP_LNKSTA_CLS_64_0GB 0x0006 /* Current Link Speed 64.0GT/s */ #define PCI_EXP_LNKSTA_NLW 0x03f0 /* Negotiated Link Width */ #define PCI_EXP_LNKSTA_NLW_X1 0x0010 /* Current Link Width x1 */ #define PCI_EXP_LNKSTA_NLW_X2 0x0020 /* Current Link Width x2 */ @@ -574,7 +582,7 @@ #define PCI_EXP_LNKSTA_LBMS 0x4000 /* Link Bandwidth Management Status */ #define PCI_EXP_LNKSTA_LABS 0x8000 /* Link Autonomous Bandwidth Status */ #define PCI_CAP_EXP_ENDPOINT_SIZEOF_V1 20 /* v1 endpoints with link end here */ -#define PCI_EXP_SLTCAP 20 /* Slot Capabilities */ +#define PCI_EXP_SLTCAP 0x14 /* Slot Capabilities */ #define PCI_EXP_SLTCAP_ABP 0x00000001 /* Attention Button Present */ #define PCI_EXP_SLTCAP_PCP 0x00000002 /* Power Controller Present */ #define PCI_EXP_SLTCAP_MRLSP 0x00000004 /* MRL Sensor Present */ @@ -587,7 +595,7 @@ #define PCI_EXP_SLTCAP_EIP 0x00020000 /* Electromechanical Interlock Present */ #define PCI_EXP_SLTCAP_NCCS 0x00040000 /* No Command Completed Support */ #define PCI_EXP_SLTCAP_PSN 0xfff80000 /* Physical Slot Number */ -#define PCI_EXP_SLTCTL 24 /* Slot Control */ +#define PCI_EXP_SLTCTL 0x18 /* Slot Control */ #define PCI_EXP_SLTCTL_ABPE 0x0001 /* Attention Button Pressed Enable */ #define PCI_EXP_SLTCTL_PFDE 0x0002 /* Power Fault Detected Enable */ #define PCI_EXP_SLTCTL_MRLSCE 0x0004 /* MRL Sensor Changed Enable */ @@ -608,8 +616,9 @@ #define PCI_EXP_SLTCTL_PWR_OFF 0x0400 /* Power Off */ #define PCI_EXP_SLTCTL_EIC 0x0800 /* Electromechanical Interlock Control */ #define PCI_EXP_SLTCTL_DLLSCE 0x1000 /* Data Link Layer State Changed Enable */ +#define PCI_EXP_SLTCTL_ASPL_DISABLE 0x2000 /* Auto Slot Power Limit Disable */ #define PCI_EXP_SLTCTL_IBPD_DISABLE 0x4000 /* In-band PD disable */ -#define PCI_EXP_SLTSTA 26 /* Slot Status */ +#define PCI_EXP_SLTSTA 0x1a /* Slot Status */ #define PCI_EXP_SLTSTA_ABP 0x0001 /* Attention Button Pressed */ #define PCI_EXP_SLTSTA_PFD 0x0002 /* Power Fault Detected */ #define PCI_EXP_SLTSTA_MRLSC 0x0004 /* MRL Sensor Changed */ @@ -619,15 +628,15 @@ #define PCI_EXP_SLTSTA_PDS 0x0040 /* Presence Detect State */ #define PCI_EXP_SLTSTA_EIS 0x0080 /* Electromechanical Interlock Status */ #define PCI_EXP_SLTSTA_DLLSC 0x0100 /* Data Link Layer State Changed */ -#define PCI_EXP_RTCTL 28 /* Root Control */ +#define PCI_EXP_RTCTL 0x1c /* Root Control */ #define PCI_EXP_RTCTL_SECEE 0x0001 /* System Error on Correctable Error */ #define PCI_EXP_RTCTL_SENFEE 0x0002 /* System Error on Non-Fatal Error */ #define PCI_EXP_RTCTL_SEFEE 0x0004 /* System Error on Fatal Error */ #define PCI_EXP_RTCTL_PMEIE 0x0008 /* PME Interrupt Enable */ #define PCI_EXP_RTCTL_CRSSVE 0x0010 /* CRS Software Visibility Enable */ -#define PCI_EXP_RTCAP 30 /* Root Capabilities */ +#define PCI_EXP_RTCAP 0x1e /* Root Capabilities */ #define PCI_EXP_RTCAP_CRSVIS 0x0001 /* CRS Software Visibility capability */ -#define PCI_EXP_RTSTA 32 /* Root Status */ +#define PCI_EXP_RTSTA 0x20 /* Root Status */ #define PCI_EXP_RTSTA_PME 0x00010000 /* PME status */ #define PCI_EXP_RTSTA_PENDING 0x00020000 /* PME pending */ /* @@ -638,7 +647,7 @@ * Use pcie_capability_read_word() and similar interfaces to use them * safely. */ -#define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */ +#define PCI_EXP_DEVCAP2 0x24 /* Device Capabilities 2 */ #define PCI_EXP_DEVCAP2_COMP_TMOUT_DIS 0x00000010 /* Completion Timeout Disable supported */ #define PCI_EXP_DEVCAP2_ARI 0x00000020 /* Alternative Routing-ID */ #define PCI_EXP_DEVCAP2_ATOMIC_ROUTE 0x00000040 /* Atomic Op routing */ @@ -650,7 +659,7 @@ #define PCI_EXP_DEVCAP2_OBFF_MSG 0x00040000 /* New message signaling */ #define PCI_EXP_DEVCAP2_OBFF_WAKE 0x00080000 /* Re-use WAKE# for OBFF */ #define PCI_EXP_DEVCAP2_EE_PREFIX 0x00200000 /* End-End TLP Prefix */ -#define PCI_EXP_DEVCTL2 40 /* Device Control 2 */ +#define PCI_EXP_DEVCTL2 0x28 /* Device Control 2 */ #define PCI_EXP_DEVCTL2_COMP_TIMEOUT 0x000f /* Completion Timeout Value */ #define PCI_EXP_DEVCTL2_COMP_TMOUT_DIS 0x0010 /* Completion Timeout Disable */ #define PCI_EXP_DEVCTL2_ARI 0x0020 /* Alternative Routing-ID */ @@ -662,31 +671,34 @@ #define PCI_EXP_DEVCTL2_OBFF_MSGA_EN 0x2000 /* Enable OBFF Message type A */ #define PCI_EXP_DEVCTL2_OBFF_MSGB_EN 0x4000 /* Enable OBFF Message type B */ #define PCI_EXP_DEVCTL2_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */ -#define PCI_EXP_DEVSTA2 42 /* Device Status 2 */ -#define PCI_CAP_EXP_RC_ENDPOINT_SIZEOF_V2 44 /* v2 endpoints without link end here */ -#define PCI_EXP_LNKCAP2 44 /* Link Capabilities 2 */ +#define PCI_EXP_DEVSTA2 0x2a /* Device Status 2 */ +#define PCI_CAP_EXP_RC_ENDPOINT_SIZEOF_V2 0x2c /* end of v2 EPs w/o link */ +#define PCI_EXP_LNKCAP2 0x2c /* Link Capabilities 2 */ #define PCI_EXP_LNKCAP2_SLS_2_5GB 0x00000002 /* Supported Speed 2.5GT/s */ #define PCI_EXP_LNKCAP2_SLS_5_0GB 0x00000004 /* Supported Speed 5GT/s */ #define PCI_EXP_LNKCAP2_SLS_8_0GB 0x00000008 /* Supported Speed 8GT/s */ #define PCI_EXP_LNKCAP2_SLS_16_0GB 0x00000010 /* Supported Speed 16GT/s */ #define PCI_EXP_LNKCAP2_SLS_32_0GB 0x00000020 /* Supported Speed 32GT/s */ +#define PCI_EXP_LNKCAP2_SLS_64_0GB 0x00000040 /* Supported Speed 64GT/s */ #define PCI_EXP_LNKCAP2_CROSSLINK 0x00000100 /* Crosslink supported */ -#define PCI_EXP_LNKCTL2 48 /* Link Control 2 */ +#define PCI_EXP_LNKCTL2 0x30 /* Link Control 2 */ #define PCI_EXP_LNKCTL2_TLS 0x000f #define PCI_EXP_LNKCTL2_TLS_2_5GT 0x0001 /* Supported Speed 2.5GT/s */ #define PCI_EXP_LNKCTL2_TLS_5_0GT 0x0002 /* Supported Speed 5GT/s */ #define PCI_EXP_LNKCTL2_TLS_8_0GT 0x0003 /* Supported Speed 8GT/s */ #define PCI_EXP_LNKCTL2_TLS_16_0GT 0x0004 /* Supported Speed 16GT/s */ #define PCI_EXP_LNKCTL2_TLS_32_0GT 0x0005 /* Supported Speed 32GT/s */ +#define PCI_EXP_LNKCTL2_TLS_64_0GT 0x0006 /* Supported Speed 64GT/s */ #define PCI_EXP_LNKCTL2_ENTER_COMP 0x0010 /* Enter Compliance */ #define PCI_EXP_LNKCTL2_TX_MARGIN 0x0380 /* Transmit Margin */ #define PCI_EXP_LNKCTL2_HASD 0x0020 /* HW Autonomous Speed Disable */ -#define PCI_EXP_LNKSTA2 50 /* Link Status 2 */ -#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 52 /* v2 endpoints with link end here */ -#define PCI_EXP_SLTCAP2 52 /* Slot Capabilities 2 */ +#define PCI_EXP_LNKSTA2 0x32 /* Link Status 2 */ +#define PCI_EXP_LNKSTA2_FLIT 0x0400 /* Flit Mode Status */ +#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 0x32 /* end of v2 EPs w/ link */ +#define PCI_EXP_SLTCAP2 0x34 /* Slot Capabilities 2 */ #define PCI_EXP_SLTCAP2_IBPD 0x00000001 /* In-band PD Disable Supported */ -#define PCI_EXP_SLTCTL2 56 /* Slot Control 2 */ -#define PCI_EXP_SLTSTA2 58 /* Slot Status 2 */ +#define PCI_EXP_SLTCTL2 0x38 /* Slot Control 2 */ +#define PCI_EXP_SLTSTA2 0x3a /* Slot Status 2 */ /* Extended Capabilities (PCI-X 2.0 and Express) */ #define PCI_EXT_CAP_ID(header) (header & 0x0000ffff) @@ -723,15 +735,18 @@ #define PCI_EXT_CAP_ID_DPC 0x1D /* Downstream Port Containment */ #define PCI_EXT_CAP_ID_L1SS 0x1E /* L1 PM Substates */ #define PCI_EXT_CAP_ID_PTM 0x1F /* Precision Time Measurement */ +#define PCI_EXT_CAP_ID_DVSEC 0x23 /* Designated Vendor-Specific */ #define PCI_EXT_CAP_ID_DLF 0x25 /* Data Link Feature */ #define PCI_EXT_CAP_ID_PL_16GT 0x26 /* Physical Layer 16.0 GT/s */ -#define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_PL_16GT +#define PCI_EXT_CAP_ID_PL_32GT 0x2A /* Physical Layer 32.0 GT/s */ +#define PCI_EXT_CAP_ID_DOE 0x2E /* Data Object Exchange */ +#define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_DOE #define PCI_EXT_CAP_DSN_SIZEOF 12 #define PCI_EXT_CAP_MCAST_ENDPOINT_SIZEOF 40 /* Advanced Error Reporting */ -#define PCI_ERR_UNCOR_STATUS 4 /* Uncorrectable Error Status */ +#define PCI_ERR_UNCOR_STATUS 0x04 /* Uncorrectable Error Status */ #define PCI_ERR_UNC_UND 0x00000001 /* Undefined */ #define PCI_ERR_UNC_DLP 0x00000010 /* Data Link Protocol */ #define PCI_ERR_UNC_SURPDN 0x00000020 /* Surprise Down */ @@ -749,11 +764,11 @@ #define PCI_ERR_UNC_MCBTLP 0x00800000 /* MC blocked TLP */ #define PCI_ERR_UNC_ATOMEG 0x01000000 /* Atomic egress blocked */ #define PCI_ERR_UNC_TLPPRE 0x02000000 /* TLP prefix blocked */ -#define PCI_ERR_UNCOR_MASK 8 /* Uncorrectable Error Mask */ +#define PCI_ERR_UNCOR_MASK 0x08 /* Uncorrectable Error Mask */ /* Same bits as above */ -#define PCI_ERR_UNCOR_SEVER 12 /* Uncorrectable Error Severity */ +#define PCI_ERR_UNCOR_SEVER 0x0c /* Uncorrectable Error Severity */ /* Same bits as above */ -#define PCI_ERR_COR_STATUS 16 /* Correctable Error Status */ +#define PCI_ERR_COR_STATUS 0x10 /* Correctable Error Status */ #define PCI_ERR_COR_RCVR 0x00000001 /* Receiver Error Status */ #define PCI_ERR_COR_BAD_TLP 0x00000040 /* Bad TLP Status */ #define PCI_ERR_COR_BAD_DLLP 0x00000080 /* Bad DLLP Status */ @@ -762,20 +777,20 @@ #define PCI_ERR_COR_ADV_NFAT 0x00002000 /* Advisory Non-Fatal */ #define PCI_ERR_COR_INTERNAL 0x00004000 /* Corrected Internal */ #define PCI_ERR_COR_LOG_OVER 0x00008000 /* Header Log Overflow */ -#define PCI_ERR_COR_MASK 20 /* Correctable Error Mask */ +#define PCI_ERR_COR_MASK 0x14 /* Correctable Error Mask */ /* Same bits as above */ -#define PCI_ERR_CAP 24 /* Advanced Error Capabilities */ -#define PCI_ERR_CAP_FEP(x) ((x) & 31) /* First Error Pointer */ +#define PCI_ERR_CAP 0x18 /* Advanced Error Capabilities & Ctrl*/ +#define PCI_ERR_CAP_FEP(x) ((x) & 0x1f) /* First Error Pointer */ #define PCI_ERR_CAP_ECRC_GENC 0x00000020 /* ECRC Generation Capable */ #define PCI_ERR_CAP_ECRC_GENE 0x00000040 /* ECRC Generation Enable */ #define PCI_ERR_CAP_ECRC_CHKC 0x00000080 /* ECRC Check Capable */ #define PCI_ERR_CAP_ECRC_CHKE 0x00000100 /* ECRC Check Enable */ -#define PCI_ERR_HEADER_LOG 28 /* Header Log Register (16 bytes) */ -#define PCI_ERR_ROOT_COMMAND 44 /* Root Error Command */ +#define PCI_ERR_HEADER_LOG 0x1c /* Header Log Register (16 bytes) */ +#define PCI_ERR_ROOT_COMMAND 0x2c /* Root Error Command */ #define PCI_ERR_ROOT_CMD_COR_EN 0x00000001 /* Correctable Err Reporting Enable */ #define PCI_ERR_ROOT_CMD_NONFATAL_EN 0x00000002 /* Non-Fatal Err Reporting Enable */ #define PCI_ERR_ROOT_CMD_FATAL_EN 0x00000004 /* Fatal Err Reporting Enable */ -#define PCI_ERR_ROOT_STATUS 48 +#define PCI_ERR_ROOT_STATUS 0x30 #define PCI_ERR_ROOT_COR_RCV 0x00000001 /* ERR_COR Received */ #define PCI_ERR_ROOT_MULTI_COR_RCV 0x00000002 /* Multiple ERR_COR */ #define PCI_ERR_ROOT_UNCOR_RCV 0x00000004 /* ERR_FATAL/NONFATAL */ @@ -784,52 +799,59 @@ #define PCI_ERR_ROOT_NONFATAL_RCV 0x00000020 /* Non-Fatal Received */ #define PCI_ERR_ROOT_FATAL_RCV 0x00000040 /* Fatal Received */ #define PCI_ERR_ROOT_AER_IRQ 0xf8000000 /* Advanced Error Interrupt Message Number */ -#define PCI_ERR_ROOT_ERR_SRC 52 /* Error Source Identification */ +#define PCI_ERR_ROOT_ERR_SRC 0x34 /* Error Source Identification */ /* Virtual Channel */ -#define PCI_VC_PORT_CAP1 4 +#define PCI_VC_PORT_CAP1 0x04 #define PCI_VC_CAP1_EVCC 0x00000007 /* extended VC count */ #define PCI_VC_CAP1_LPEVCC 0x00000070 /* low prio extended VC count */ #define PCI_VC_CAP1_ARB_SIZE 0x00000c00 -#define PCI_VC_PORT_CAP2 8 +#define PCI_VC_PORT_CAP2 0x08 #define PCI_VC_CAP2_32_PHASE 0x00000002 #define PCI_VC_CAP2_64_PHASE 0x00000004 #define PCI_VC_CAP2_128_PHASE 0x00000008 #define PCI_VC_CAP2_ARB_OFF 0xff000000 -#define PCI_VC_PORT_CTRL 12 +#define PCI_VC_PORT_CTRL 0x0c #define PCI_VC_PORT_CTRL_LOAD_TABLE 0x00000001 -#define PCI_VC_PORT_STATUS 14 +#define PCI_VC_PORT_STATUS 0x0e #define PCI_VC_PORT_STATUS_TABLE 0x00000001 -#define PCI_VC_RES_CAP 16 +#define PCI_VC_RES_CAP 0x10 #define PCI_VC_RES_CAP_32_PHASE 0x00000002 #define PCI_VC_RES_CAP_64_PHASE 0x00000004 #define PCI_VC_RES_CAP_128_PHASE 0x00000008 #define PCI_VC_RES_CAP_128_PHASE_TB 0x00000010 #define PCI_VC_RES_CAP_256_PHASE 0x00000020 #define PCI_VC_RES_CAP_ARB_OFF 0xff000000 -#define PCI_VC_RES_CTRL 20 +#define PCI_VC_RES_CTRL 0x14 #define PCI_VC_RES_CTRL_LOAD_TABLE 0x00010000 #define PCI_VC_RES_CTRL_ARB_SELECT 0x000e0000 #define PCI_VC_RES_CTRL_ID 0x07000000 #define PCI_VC_RES_CTRL_ENABLE 0x80000000 -#define PCI_VC_RES_STATUS 26 +#define PCI_VC_RES_STATUS 0x1a #define PCI_VC_RES_STATUS_TABLE 0x00000001 #define PCI_VC_RES_STATUS_NEGO 0x00000002 #define PCI_CAP_VC_BASE_SIZEOF 0x10 -#define PCI_CAP_VC_PER_VC_SIZEOF 0x0C +#define PCI_CAP_VC_PER_VC_SIZEOF 0x0c /* Power Budgeting */ -#define PCI_PWR_DSR 4 /* Data Select Register */ -#define PCI_PWR_DATA 8 /* Data Register */ +#define PCI_PWR_DSR 0x04 /* Data Select Register */ +#define PCI_PWR_DATA 0x08 /* Data Register */ #define PCI_PWR_DATA_BASE(x) ((x) & 0xff) /* Base Power */ #define PCI_PWR_DATA_SCALE(x) (((x) >> 8) & 3) /* Data Scale */ #define PCI_PWR_DATA_PM_SUB(x) (((x) >> 10) & 7) /* PM Sub State */ #define PCI_PWR_DATA_PM_STATE(x) (((x) >> 13) & 3) /* PM State */ #define PCI_PWR_DATA_TYPE(x) (((x) >> 15) & 7) /* Type */ #define PCI_PWR_DATA_RAIL(x) (((x) >> 18) & 7) /* Power Rail */ -#define PCI_PWR_CAP 12 /* Capability */ +#define PCI_PWR_CAP 0x0c /* Capability */ #define PCI_PWR_CAP_BUDGET(x) ((x) & 1) /* Included in system budget */ -#define PCI_EXT_CAP_PWR_SIZEOF 16 +#define PCI_EXT_CAP_PWR_SIZEOF 0x10 + +/* Root Complex Event Collector Endpoint Association */ +#define PCI_RCEC_RCIEP_BITMAP 4 /* Associated Bitmap for RCiEPs */ +#define PCI_RCEC_BUSN 8 /* RCEC Associated Bus Numbers */ +#define PCI_RCEC_BUSN_REG_VER 0x02 /* Least version with BUSN present */ +#define PCI_RCEC_BUSN_NEXT(x) (((x) >> 8) & 0xff) +#define PCI_RCEC_BUSN_LAST(x) (((x) >> 16) & 0xff) /* Vendor-Specific (VSEC, PCI_EXT_CAP_ID_VNDR) */ #define PCI_VNDR_HEADER 4 /* Vendor-Specific Header */ @@ -946,7 +968,7 @@ #define PCI_SRIOV_VFM_MI 0x1 /* Dormant.MigrateIn */ #define PCI_SRIOV_VFM_MO 0x2 /* Active.MigrateOut */ #define PCI_SRIOV_VFM_AV 0x3 /* Active.Available */ -#define PCI_EXT_CAP_SRIOV_SIZEOF 64 +#define PCI_EXT_CAP_SRIOV_SIZEOF 0x40 #define PCI_LTR_MAX_SNOOP_LAT 0x4 #define PCI_LTR_MAX_NOSNOOP_LAT 0x6 @@ -999,12 +1021,12 @@ #define PCI_TPH_LOC_NONE 0x000 /* no location */ #define PCI_TPH_LOC_CAP 0x200 /* in capability */ #define PCI_TPH_LOC_MSIX 0x400 /* in MSI-X */ -#define PCI_TPH_CAP_ST_MASK 0x07FF0000 /* st table mask */ -#define PCI_TPH_CAP_ST_SHIFT 16 /* st table shift */ -#define PCI_TPH_BASE_SIZEOF 12 /* size with no st table */ +#define PCI_TPH_CAP_ST_MASK 0x07FF0000 /* ST table mask */ +#define PCI_TPH_CAP_ST_SHIFT 16 /* ST table shift */ +#define PCI_TPH_BASE_SIZEOF 0xc /* size with no ST table */ /* Downstream Port Containment */ -#define PCI_EXP_DPC_CAP 4 /* DPC Capability */ +#define PCI_EXP_DPC_CAP 0x04 /* DPC Capability */ #define PCI_EXP_DPC_IRQ 0x001F /* Interrupt Message Number */ #define PCI_EXP_DPC_CAP_RP_EXT 0x0020 /* Root Port Extensions */ #define PCI_EXP_DPC_CAP_POISONED_TLP 0x0040 /* Poisoned TLP Egress Blocking Supported */ @@ -1012,19 +1034,19 @@ #define PCI_EXP_DPC_RP_PIO_LOG_SIZE 0x0F00 /* RP PIO Log Size */ #define PCI_EXP_DPC_CAP_DL_ACTIVE 0x1000 /* ERR_COR signal on DL_Active supported */ -#define PCI_EXP_DPC_CTL 6 /* DPC control */ +#define PCI_EXP_DPC_CTL 0x06 /* DPC control */ #define PCI_EXP_DPC_CTL_EN_FATAL 0x0001 /* Enable trigger on ERR_FATAL message */ #define PCI_EXP_DPC_CTL_EN_NONFATAL 0x0002 /* Enable trigger on ERR_NONFATAL message */ #define PCI_EXP_DPC_CTL_INT_EN 0x0008 /* DPC Interrupt Enable */ -#define PCI_EXP_DPC_STATUS 8 /* DPC Status */ +#define PCI_EXP_DPC_STATUS 0x08 /* DPC Status */ #define PCI_EXP_DPC_STATUS_TRIGGER 0x0001 /* Trigger Status */ #define PCI_EXP_DPC_STATUS_TRIGGER_RSN 0x0006 /* Trigger Reason */ #define PCI_EXP_DPC_STATUS_INTERRUPT 0x0008 /* Interrupt Status */ #define PCI_EXP_DPC_RP_BUSY 0x0010 /* Root Port Busy */ #define PCI_EXP_DPC_STATUS_TRIGGER_RSN_EXT 0x0060 /* Trig Reason Extension */ -#define PCI_EXP_DPC_SOURCE_ID 10 /* DPC Source Identifier */ +#define PCI_EXP_DPC_SOURCE_ID 0x0A /* DPC Source Identifier */ #define PCI_EXP_DPC_RP_PIO_STATUS 0x0C /* RP PIO Status */ #define PCI_EXP_DPC_RP_PIO_MASK 0x10 /* RP PIO Mask */ @@ -1038,6 +1060,7 @@ /* Precision Time Measurement */ #define PCI_PTM_CAP 0x04 /* PTM Capability */ #define PCI_PTM_CAP_REQ 0x00000001 /* Requester capable */ +#define PCI_PTM_CAP_RES 0x00000002 /* Responder capable */ #define PCI_PTM_CAP_ROOT 0x00000004 /* Root capable */ #define PCI_PTM_GRANULARITY_MASK 0x0000FF00 /* Clock granularity */ #define PCI_PTM_CTRL 0x08 /* PTM Control */ @@ -1066,6 +1089,14 @@ #define PCI_L1SS_CTL1_LTR_L12_TH_SCALE 0xe0000000 /* LTR_L1.2_THRESHOLD_Scale */ #define PCI_L1SS_CTL2 0x0c /* Control 2 Register */ +/* Designated Vendor-Specific (DVSEC, PCI_EXT_CAP_ID_DVSEC) */ +#define PCI_DVSEC_HEADER1 0x4 /* Designated Vendor-Specific Header1 */ +#define PCI_DVSEC_HEADER1_VID(x) ((x) & 0xffff) +#define PCI_DVSEC_HEADER1_REV(x) (((x) >> 16) & 0xf) +#define PCI_DVSEC_HEADER1_LEN(x) (((x) >> 20) & 0xfff) +#define PCI_DVSEC_HEADER2 0x8 /* Designated Vendor-Specific Header2 */ +#define PCI_DVSEC_HEADER2_ID(x) ((x) & 0xffff) + /* Data Link Feature */ #define PCI_DLF_CAP 0x04 /* Capabilities Register */ #define PCI_DLF_EXCHANGE_ENABLE 0x80000000 /* Data Link Feature Exchange Enable */ @@ -1076,4 +1107,31 @@ #define PCI_PL_16GT_LE_CTRL_USP_TX_PRESET_MASK 0x000000F0 #define PCI_PL_16GT_LE_CTRL_USP_TX_PRESET_SHIFT 4 +/* Data Object Exchange */ +#define PCI_DOE_CAP 0x04 /* DOE Capabilities Register */ +#define PCI_DOE_CAP_INT_SUP 0x00000001 /* Interrupt Support */ +#define PCI_DOE_CAP_INT_MSG_NUM 0x00000ffe /* Interrupt Message Number */ +#define PCI_DOE_CTRL 0x08 /* DOE Control Register */ +#define PCI_DOE_CTRL_ABORT 0x00000001 /* DOE Abort */ +#define PCI_DOE_CTRL_INT_EN 0x00000002 /* DOE Interrupt Enable */ +#define PCI_DOE_CTRL_GO 0x80000000 /* DOE Go */ +#define PCI_DOE_STATUS 0x0c /* DOE Status Register */ +#define PCI_DOE_STATUS_BUSY 0x00000001 /* DOE Busy */ +#define PCI_DOE_STATUS_INT_STATUS 0x00000002 /* DOE Interrupt Status */ +#define PCI_DOE_STATUS_ERROR 0x00000004 /* DOE Error */ +#define PCI_DOE_STATUS_DATA_OBJECT_READY 0x80000000 /* Data Object Ready */ +#define PCI_DOE_WRITE 0x10 /* DOE Write Data Mailbox Register */ +#define PCI_DOE_READ 0x14 /* DOE Read Data Mailbox Register */ +#define PCI_DOE_CAP_SIZEOF 0x18 /* Size of DOE register block */ + +/* DOE Data Object - note not actually registers */ +#define PCI_DOE_DATA_OBJECT_HEADER_1_VID 0x0000ffff +#define PCI_DOE_DATA_OBJECT_HEADER_1_TYPE 0x00ff0000 +#define PCI_DOE_DATA_OBJECT_HEADER_2_LENGTH 0x0003ffff + +#define PCI_DOE_DATA_OBJECT_DISC_REQ_3_INDEX 0x000000ff +#define PCI_DOE_DATA_OBJECT_DISC_RSP_3_VID 0x0000ffff +#define PCI_DOE_DATA_OBJECT_DISC_RSP_3_PROTOCOL 0x00ff0000 +#define PCI_DOE_DATA_OBJECT_DISC_RSP_3_NEXT_INDEX 0xff000000 + #endif /* LINUX_PCI_REGS_H */ diff --git a/linux-headers/include/linux/pcitest.h b/linux-headers/include/linux/pcitest.h index c3ab4c82629..f9c1af8d141 100644 --- a/linux-headers/include/linux/pcitest.h +++ b/linux-headers/include/linux/pcitest.h @@ -1,5 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/** +/* * pcitest.h - PCI test uapi defines * * Copyright (C) 2017 Texas Instruments diff --git a/linux-headers/include/linux/perf_event.h b/linux-headers/include/linux/perf_event.h index a9a56f90b65..0afbb1bf160 100644 --- a/linux-headers/include/linux/perf_event.h +++ b/linux-headers/include/linux/perf_event.h @@ -37,6 +37,21 @@ enum perf_type_id { PERF_TYPE_MAX, /* non-ABI */ }; +/* + * attr.config layout for type PERF_TYPE_HARDWARE and PERF_TYPE_HW_CACHE + * PERF_TYPE_HARDWARE: 0xEEEEEEEE000000AA + * AA: hardware event ID + * EEEEEEEE: PMU type ID + * PERF_TYPE_HW_CACHE: 0xEEEEEEEE00DDCCBB + * BB: hardware cache ID + * CC: hardware cache op ID + * DD: hardware cache op result ID + * EEEEEEEE: PMU type ID + * If the PMU type ID is 0, the PERF_TYPE_RAW will be applied. + */ +#define PERF_PMU_TYPE_SHIFT 32 +#define PERF_HW_EVENT_MASK 0xffffffff + /* * Generalized performance event event_id types, used by the * attr.event_id parameter of the sys_perf_event_open() @@ -112,6 +127,7 @@ enum perf_sw_ids { PERF_COUNT_SW_EMULATION_FAULTS = 8, PERF_COUNT_SW_DUMMY = 9, PERF_COUNT_SW_BPF_OUTPUT = 10, + PERF_COUNT_SW_CGROUP_SWITCHES = 11, PERF_COUNT_SW_MAX, /* non-ABI */ }; @@ -143,12 +159,14 @@ enum perf_event_sample_format { PERF_SAMPLE_PHYS_ADDR = 1U << 19, PERF_SAMPLE_AUX = 1U << 20, PERF_SAMPLE_CGROUP = 1U << 21, + PERF_SAMPLE_DATA_PAGE_SIZE = 1U << 22, + PERF_SAMPLE_CODE_PAGE_SIZE = 1U << 23, + PERF_SAMPLE_WEIGHT_STRUCT = 1U << 24, - PERF_SAMPLE_MAX = 1U << 22, /* non-ABI */ - - __PERF_SAMPLE_CALLCHAIN_EARLY = 1ULL << 63, /* non-ABI; internal use */ + PERF_SAMPLE_MAX = 1U << 25, /* non-ABI */ }; +#define PERF_SAMPLE_WEIGHT_TYPE (PERF_SAMPLE_WEIGHT | PERF_SAMPLE_WEIGHT_STRUCT) /* * values to program into branch_sample_type when PERF_SAMPLE_BRANCH is set * @@ -184,6 +202,8 @@ enum perf_branch_sample_type_shift { PERF_SAMPLE_BRANCH_HW_INDEX_SHIFT = 17, /* save low level index of raw branch records */ + PERF_SAMPLE_BRANCH_PRIV_SAVE_SHIFT = 18, /* save privilege mode */ + PERF_SAMPLE_BRANCH_MAX_SHIFT /* non-ABI */ }; @@ -213,6 +233,8 @@ enum perf_branch_sample_type { PERF_SAMPLE_BRANCH_HW_INDEX = 1U << PERF_SAMPLE_BRANCH_HW_INDEX_SHIFT, + PERF_SAMPLE_BRANCH_PRIV_SAVE = 1U << PERF_SAMPLE_BRANCH_PRIV_SAVE_SHIFT, + PERF_SAMPLE_BRANCH_MAX = 1U << PERF_SAMPLE_BRANCH_MAX_SHIFT, }; @@ -231,9 +253,50 @@ enum { PERF_BR_SYSRET = 8, /* syscall return */ PERF_BR_COND_CALL = 9, /* conditional function call */ PERF_BR_COND_RET = 10, /* conditional function return */ + PERF_BR_ERET = 11, /* exception return */ + PERF_BR_IRQ = 12, /* irq */ + PERF_BR_SERROR = 13, /* system error */ + PERF_BR_NO_TX = 14, /* not in transaction */ + PERF_BR_EXTEND_ABI = 15, /* extend ABI */ PERF_BR_MAX, }; +/* + * Common branch speculation outcome classification + */ +enum { + PERF_BR_SPEC_NA = 0, /* Not available */ + PERF_BR_SPEC_WRONG_PATH = 1, /* Speculative but on wrong path */ + PERF_BR_NON_SPEC_CORRECT_PATH = 2, /* Non-speculative but on correct path */ + PERF_BR_SPEC_CORRECT_PATH = 3, /* Speculative and on correct path */ + PERF_BR_SPEC_MAX, +}; + +enum { + PERF_BR_NEW_FAULT_ALGN = 0, /* Alignment fault */ + PERF_BR_NEW_FAULT_DATA = 1, /* Data fault */ + PERF_BR_NEW_FAULT_INST = 2, /* Inst fault */ + PERF_BR_NEW_ARCH_1 = 3, /* Architecture specific */ + PERF_BR_NEW_ARCH_2 = 4, /* Architecture specific */ + PERF_BR_NEW_ARCH_3 = 5, /* Architecture specific */ + PERF_BR_NEW_ARCH_4 = 6, /* Architecture specific */ + PERF_BR_NEW_ARCH_5 = 7, /* Architecture specific */ + PERF_BR_NEW_MAX, +}; + +enum { + PERF_BR_PRIV_UNKNOWN = 0, + PERF_BR_PRIV_USER = 1, + PERF_BR_PRIV_KERNEL = 2, + PERF_BR_PRIV_HV = 3, +}; + +#define PERF_BR_ARM64_FIQ PERF_BR_NEW_ARCH_1 +#define PERF_BR_ARM64_DEBUG_HALT PERF_BR_NEW_ARCH_2 +#define PERF_BR_ARM64_DEBUG_EXIT PERF_BR_NEW_ARCH_3 +#define PERF_BR_ARM64_DEBUG_INST PERF_BR_NEW_ARCH_4 +#define PERF_BR_ARM64_DEBUG_DATA PERF_BR_NEW_ARCH_5 + #define PERF_SAMPLE_BRANCH_PLM_ALL \ (PERF_SAMPLE_BRANCH_USER|\ PERF_SAMPLE_BRANCH_KERNEL|\ @@ -279,6 +342,7 @@ enum { * { u64 time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED * { u64 time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING * { u64 id; } && PERF_FORMAT_ID + * { u64 lost; } && PERF_FORMAT_LOST * } && !PERF_FORMAT_GROUP * * { u64 nr; @@ -286,6 +350,7 @@ enum { * { u64 time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING * { u64 value; * { u64 id; } && PERF_FORMAT_ID + * { u64 lost; } && PERF_FORMAT_LOST * } cntr[nr]; * } && PERF_FORMAT_GROUP * }; @@ -295,8 +360,9 @@ enum perf_event_read_format { PERF_FORMAT_TOTAL_TIME_RUNNING = 1U << 1, PERF_FORMAT_ID = 1U << 2, PERF_FORMAT_GROUP = 1U << 3, + PERF_FORMAT_LOST = 1U << 4, - PERF_FORMAT_MAX = 1U << 4, /* non-ABI */ + PERF_FORMAT_MAX = 1U << 5, /* non-ABI */ }; #define PERF_ATTR_SIZE_VER0 64 /* sizeof first published struct */ @@ -307,6 +373,8 @@ enum perf_event_read_format { #define PERF_ATTR_SIZE_VER4 104 /* add: sample_regs_intr */ #define PERF_ATTR_SIZE_VER5 112 /* add: aux_watermark */ #define PERF_ATTR_SIZE_VER6 120 /* add: aux_sample_size */ +#define PERF_ATTR_SIZE_VER7 128 /* add: sig_data */ +#define PERF_ATTR_SIZE_VER8 136 /* add: config3 */ /* * Hardware event_id to monitor via a performance monitoring event: @@ -384,7 +452,11 @@ struct perf_event_attr { aux_output : 1, /* generate AUX records instead of events */ cgroup : 1, /* include cgroup events */ text_poke : 1, /* include text poke events */ - __reserved_1 : 30; + build_id : 1, /* use build id in mmap2 events */ + inherit_thread : 1, /* children only inherit if cloned with CLONE_THREAD */ + remove_on_exec : 1, /* event is removed from task on exec */ + sigtrap : 1, /* send synchronous SIGTRAP on event */ + __reserved_1 : 26; union { __u32 wakeup_events; /* wakeup every n events */ @@ -436,6 +508,16 @@ struct perf_event_attr { __u16 __reserved_2; __u32 aux_sample_size; __u32 __reserved_3; + + /* + * User provided data if sigtrap=1, passed back to user via + * siginfo_t::si_perf_data, e.g. to permit user to identify the event. + * Note, siginfo_t::si_perf_data is long-sized, and sig_data will be + * truncated accordingly on 32 bit architectures. + */ + __u64 sig_data; + + __u64 config3; /* extension of config2 */ }; /* @@ -456,7 +538,7 @@ struct perf_event_query_bpf { /* * User provided buffer to store program ids */ - __u32 ids[0]; + __u32 ids[]; }; /* @@ -657,6 +739,22 @@ struct perf_event_mmap_page { __u64 aux_size; }; +/* + * The current state of perf_event_header::misc bits usage: + * ('|' used bit, '-' unused bit) + * + * 012 CDEF + * |||---------|||| + * + * Where: + * 0-2 CPUMODE_MASK + * + * C PROC_MAP_PARSE_TIMEOUT + * D MMAP_DATA / COMM_EXEC / FORK_EXEC / SWITCH_OUT + * E MMAP_BUILD_ID / EXACT_IP / SCHED_OUT_PREEMPT + * F (reserved) + */ + #define PERF_RECORD_MISC_CPUMODE_MASK (7 << 0) #define PERF_RECORD_MISC_CPUMODE_UNKNOWN (0 << 0) #define PERF_RECORD_MISC_KERNEL (1 << 0) @@ -688,6 +786,7 @@ struct perf_event_mmap_page { * * PERF_RECORD_MISC_EXACT_IP - PERF_RECORD_SAMPLE of precise events * PERF_RECORD_MISC_SWITCH_OUT_PREEMPT - PERF_RECORD_SWITCH* events + * PERF_RECORD_MISC_MMAP_BUILD_ID - PERF_RECORD_MMAP2 event * * * PERF_RECORD_MISC_EXACT_IP: @@ -697,9 +796,13 @@ struct perf_event_mmap_page { * * PERF_RECORD_MISC_SWITCH_OUT_PREEMPT: * Indicates that thread was preempted in TASK_RUNNING state. + * + * PERF_RECORD_MISC_MMAP_BUILD_ID: + * Indicates that mmap2 event carries build id data. */ #define PERF_RECORD_MISC_EXACT_IP (1 << 14) #define PERF_RECORD_MISC_SWITCH_OUT_PREEMPT (1 << 14) +#define PERF_RECORD_MISC_MMAP_BUILD_ID (1 << 14) /* * Reserve the last bit to indicate some extended misc field */ @@ -888,7 +991,24 @@ enum perf_event_type { * char data[size]; * u64 dyn_size; } && PERF_SAMPLE_STACK_USER * - * { u64 weight; } && PERF_SAMPLE_WEIGHT + * { union perf_sample_weight + * { + * u64 full; && PERF_SAMPLE_WEIGHT + * #if defined(__LITTLE_ENDIAN_BITFIELD) + * struct { + * u32 var1_dw; + * u16 var2_w; + * u16 var3_w; + * } && PERF_SAMPLE_WEIGHT_STRUCT + * #elif defined(__BIG_ENDIAN_BITFIELD) + * struct { + * u16 var3_w; + * u16 var2_w; + * u32 var1_dw; + * } && PERF_SAMPLE_WEIGHT_STRUCT + * #endif + * } + * } * { u64 data_src; } && PERF_SAMPLE_DATA_SRC * { u64 transaction; } && PERF_SAMPLE_TRANSACTION * { u64 abi; # enum perf_sample_regs_abi @@ -896,6 +1016,8 @@ enum perf_event_type { * { u64 phys_addr;} && PERF_SAMPLE_PHYS_ADDR * { u64 size; * char data[size]; } && PERF_SAMPLE_AUX + * { u64 data_page_size;} && PERF_SAMPLE_DATA_PAGE_SIZE + * { u64 code_page_size;} && PERF_SAMPLE_CODE_PAGE_SIZE * }; */ PERF_RECORD_SAMPLE = 9, @@ -911,10 +1033,20 @@ enum perf_event_type { * u64 addr; * u64 len; * u64 pgoff; - * u32 maj; - * u32 min; - * u64 ino; - * u64 ino_generation; + * union { + * struct { + * u32 maj; + * u32 min; + * u64 ino; + * u64 ino_generation; + * }; + * struct { + * u8 build_id_size; + * u8 __reserved_1; + * u16 __reserved_2; + * u8 build_id[20]; + * }; + * }; * u32 prot, flags; * char filename[]; * struct sample_id sample_id; @@ -1060,6 +1192,21 @@ enum perf_event_type { */ PERF_RECORD_TEXT_POKE = 20, + /* + * Data written to the AUX area by hardware due to aux_output, may need + * to be matched to the event by an architecture-specific hardware ID. + * This records the hardware ID, but requires sample_id to provide the + * event ID. e.g. Intel PT uses this record to disambiguate PEBS-via-PT + * records from multiple events. + * + * struct { + * struct perf_event_header header; + * u64 hw_id; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_AUX_OUTPUT_HW_ID = 21, + PERF_RECORD_MAX, /* non-ABI */ }; @@ -1101,10 +1248,15 @@ enum perf_callchain_context { /** * PERF_RECORD_AUX::flags bits */ -#define PERF_AUX_FLAG_TRUNCATED 0x01 /* record was truncated to fit */ -#define PERF_AUX_FLAG_OVERWRITE 0x02 /* snapshot from overwrite mode */ -#define PERF_AUX_FLAG_PARTIAL 0x04 /* record contains gaps */ -#define PERF_AUX_FLAG_COLLISION 0x08 /* sample collided with another */ +#define PERF_AUX_FLAG_TRUNCATED 0x01 /* record was truncated to fit */ +#define PERF_AUX_FLAG_OVERWRITE 0x02 /* snapshot from overwrite mode */ +#define PERF_AUX_FLAG_PARTIAL 0x04 /* record contains gaps */ +#define PERF_AUX_FLAG_COLLISION 0x08 /* sample collided with another */ +#define PERF_AUX_FLAG_PMU_FORMAT_TYPE_MASK 0xff00 /* PMU specific trace format type */ + +/* CoreSight PMU AUX buffer formats */ +#define PERF_AUX_FLAG_CORESIGHT_FORMAT_CORESIGHT 0x0000 /* Default for backward compatibility */ +#define PERF_AUX_FLAG_CORESIGHT_FORMAT_RAW 0x0100 /* Raw format of the source */ #define PERF_FLAG_FD_NO_GROUP (1UL << 0) #define PERF_FLAG_FD_OUTPUT (1UL << 1) @@ -1123,14 +1275,18 @@ union perf_mem_data_src { mem_lvl_num:4, /* memory hierarchy level number */ mem_remote:1, /* remote */ mem_snoopx:2, /* snoop mode, ext */ - mem_rsvd:24; + mem_blk:3, /* access blocked */ + mem_hops:3, /* hop level */ + mem_rsvd:18; }; }; #elif defined(__BIG_ENDIAN_BITFIELD) union perf_mem_data_src { __u64 val; struct { - __u64 mem_rsvd:24, + __u64 mem_rsvd:18, + mem_hops:3, /* hop level */ + mem_blk:3, /* access blocked */ mem_snoopx:2, /* snoop mode, ext */ mem_remote:1, /* remote */ mem_lvl_num:4, /* memory hierarchy level number */ @@ -1153,7 +1309,13 @@ union perf_mem_data_src { #define PERF_MEM_OP_EXEC 0x10 /* code (execution) */ #define PERF_MEM_OP_SHIFT 0 -/* memory hierarchy (memory level, hit or miss) */ +/* + * PERF_MEM_LVL_* namespace being depricated to some extent in the + * favour of newer composite PERF_MEM_{LVLNUM_,REMOTE_,SNOOPX_} fields. + * Supporting this namespace inorder to not break defined ABIs. + * + * memory hierarchy (memory level, hit or miss) + */ #define PERF_MEM_LVL_NA 0x01 /* not available */ #define PERF_MEM_LVL_HIT 0x02 /* hit level */ #define PERF_MEM_LVL_MISS 0x04 /* miss level */ @@ -1177,7 +1339,10 @@ union perf_mem_data_src { #define PERF_MEM_LVLNUM_L2 0x02 /* L2 */ #define PERF_MEM_LVLNUM_L3 0x03 /* L3 */ #define PERF_MEM_LVLNUM_L4 0x04 /* L4 */ -/* 5-0xa available */ +/* 5-0x7 available */ +#define PERF_MEM_LVLNUM_UNC 0x08 /* Uncached */ +#define PERF_MEM_LVLNUM_CXL 0x09 /* CXL */ +#define PERF_MEM_LVLNUM_IO 0x0a /* I/O */ #define PERF_MEM_LVLNUM_ANY_CACHE 0x0b /* Any cache */ #define PERF_MEM_LVLNUM_LFB 0x0c /* LFB */ #define PERF_MEM_LVLNUM_RAM 0x0d /* RAM */ @@ -1195,7 +1360,7 @@ union perf_mem_data_src { #define PERF_MEM_SNOOP_SHIFT 19 #define PERF_MEM_SNOOPX_FWD 0x01 /* forward */ -/* 1 free */ +#define PERF_MEM_SNOOPX_PEER 0x02 /* xfer from peer */ #define PERF_MEM_SNOOPX_SHIFT 38 /* locked instruction */ @@ -1213,6 +1378,20 @@ union perf_mem_data_src { #define PERF_MEM_TLB_OS 0x40 /* OS fault handler */ #define PERF_MEM_TLB_SHIFT 26 +/* Access blocked */ +#define PERF_MEM_BLK_NA 0x01 /* not available */ +#define PERF_MEM_BLK_DATA 0x02 /* data could not be forwarded */ +#define PERF_MEM_BLK_ADDR 0x04 /* address conflict */ +#define PERF_MEM_BLK_SHIFT 40 + +/* hop level */ +#define PERF_MEM_HOPS_0 0x01 /* remote core, same node */ +#define PERF_MEM_HOPS_1 0x02 /* remote node, same socket */ +#define PERF_MEM_HOPS_2 0x03 /* remote socket, same board */ +#define PERF_MEM_HOPS_3 0x04 /* remote board */ +/* 5-7 available */ +#define PERF_MEM_HOPS_SHIFT 43 + #define PERF_MEM_S(a, s) \ (((__u64)PERF_MEM_##a##_##s) << PERF_MEM_##a##_SHIFT) @@ -1231,6 +1410,7 @@ union perf_mem_data_src { * abort: aborting a hardware transaction * cycles: cycles from last branch (or 0 if not supported) * type: branch type + * spec: branch speculation info (or 0 if not supported) */ struct perf_branch_entry { __u64 from; @@ -1241,7 +1421,29 @@ struct perf_branch_entry { abort:1, /* transaction abort */ cycles:16, /* cycle count to last branch */ type:4, /* branch type */ - reserved:40; + spec:2, /* branch speculation info */ + new_type:4, /* additional branch type */ + priv:3, /* privilege level */ + reserved:31; +}; + +union perf_sample_weight { + __u64 full; +#if defined(__LITTLE_ENDIAN_BITFIELD) + struct { + __u32 var1_dw; + __u16 var2_w; + __u16 var3_w; + }; +#elif defined(__BIG_ENDIAN_BITFIELD) + struct { + __u16 var3_w; + __u16 var2_w; + __u32 var1_dw; + }; +#else +#error "Unknown endianness" +#endif }; #endif /* _LINUX_PERF_EVENT_H */ diff --git a/linux-headers/include/linux/pfkeyv2.h b/linux-headers/include/linux/pfkeyv2.h index d65b1178526..8abae1f6749 100644 --- a/linux-headers/include/linux/pfkeyv2.h +++ b/linux-headers/include/linux/pfkeyv2.h @@ -309,6 +309,7 @@ struct sadb_x_filter { #define SADB_X_AALG_SHA2_512HMAC 7 #define SADB_X_AALG_RIPEMD160HMAC 8 #define SADB_X_AALG_AES_XCBC_MAC 9 +#define SADB_X_AALG_SM3_256HMAC 10 #define SADB_X_AALG_NULL 251 /* kame */ #define SADB_AALG_MAX 251 @@ -329,6 +330,7 @@ struct sadb_x_filter { #define SADB_X_EALG_AES_GCM_ICV16 20 #define SADB_X_EALG_CAMELLIACBC 22 #define SADB_X_EALG_NULL_AES_GMAC 23 +#define SADB_X_EALG_SM4CBC 24 #define SADB_EALG_MAX 253 /* last EALG */ /* private allocations should use 249-255 (RFC2407) */ #define SADB_X_EALG_SERPENTCBC 252 /* draft-ietf-ipsec-ciph-aes-cbc-00 */ diff --git a/linux-headers/include/linux/pfrut.h b/linux-headers/include/linux/pfrut.h new file mode 100644 index 00000000000..42fa15f8310 --- /dev/null +++ b/linux-headers/include/linux/pfrut.h @@ -0,0 +1,262 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Platform Firmware Runtime Update header + * + * Copyright(c) 2021 Intel Corporation. All rights reserved. + */ +#ifndef __PFRUT_H__ +#define __PFRUT_H__ + +#include +#include + +#define PFRUT_IOCTL_MAGIC 0xEE + +/** + * PFRU_IOC_SET_REV - _IOW(PFRUT_IOCTL_MAGIC, 0x01, unsigned int) + * + * Return: + * * 0 - success + * * -EFAULT - fail to read the revision id + * * -EINVAL - user provides an invalid revision id + * + * Set the Revision ID for Platform Firmware Runtime Update. + */ +#define PFRU_IOC_SET_REV _IOW(PFRUT_IOCTL_MAGIC, 0x01, unsigned int) + +/** + * PFRU_IOC_STAGE - _IOW(PFRUT_IOCTL_MAGIC, 0x02, unsigned int) + * + * Return: + * * 0 - success + * * -EINVAL - stage phase returns invalid result + * + * Stage a capsule image from communication buffer and perform authentication. + */ +#define PFRU_IOC_STAGE _IOW(PFRUT_IOCTL_MAGIC, 0x02, unsigned int) + +/** + * PFRU_IOC_ACTIVATE - _IOW(PFRUT_IOCTL_MAGIC, 0x03, unsigned int) + * + * Return: + * * 0 - success + * * -EINVAL - activate phase returns invalid result + * + * Activate a previously staged capsule image. + */ +#define PFRU_IOC_ACTIVATE _IOW(PFRUT_IOCTL_MAGIC, 0x03, unsigned int) + +/** + * PFRU_IOC_STAGE_ACTIVATE - _IOW(PFRUT_IOCTL_MAGIC, 0x04, unsigned int) + * + * Return: + * * 0 - success + * * -EINVAL - stage/activate phase returns invalid result. + * + * Perform both stage and activation action. + */ +#define PFRU_IOC_STAGE_ACTIVATE _IOW(PFRUT_IOCTL_MAGIC, 0x04, unsigned int) + +/** + * PFRU_IOC_QUERY_CAP - _IOR(PFRUT_IOCTL_MAGIC, 0x05, + * struct pfru_update_cap_info) + * + * Return: + * * 0 - success + * * -EINVAL - query phase returns invalid result + * * -EFAULT - the result fails to be copied to userspace + * + * Retrieve information on the Platform Firmware Runtime Update capability. + * The information is a struct pfru_update_cap_info. + */ +#define PFRU_IOC_QUERY_CAP _IOR(PFRUT_IOCTL_MAGIC, 0x05, struct pfru_update_cap_info) + +/** + * struct pfru_payload_hdr - Capsule file payload header. + * + * @sig: Signature of this capsule file. + * @hdr_version: Revision of this header structure. + * @hdr_size: Size of this header, including the OemHeader bytes. + * @hw_ver: The supported firmware version. + * @rt_ver: Version of the code injection image. + * @platform_id: A platform specific GUID to specify the platform what + * this capsule image support. + */ +struct pfru_payload_hdr { + __u32 sig; + __u32 hdr_version; + __u32 hdr_size; + __u32 hw_ver; + __u32 rt_ver; + __u8 platform_id[16]; +}; + +enum pfru_dsm_status { + DSM_SUCCEED = 0, + DSM_FUNC_NOT_SUPPORT = 1, + DSM_INVAL_INPUT = 2, + DSM_HARDWARE_ERR = 3, + DSM_RETRY_SUGGESTED = 4, + DSM_UNKNOWN = 5, + DSM_FUNC_SPEC_ERR = 6, +}; + +/** + * struct pfru_update_cap_info - Runtime update capability information. + * + * @status: Indicator of whether this query succeed. + * @update_cap: Bitmap to indicate whether the feature is supported. + * @code_type: A buffer containing an image type GUID. + * @fw_version: Platform firmware version. + * @code_rt_version: Code injection runtime version for anti-rollback. + * @drv_type: A buffer containing an image type GUID. + * @drv_rt_version: The version of the driver update runtime code. + * @drv_svn: The secure version number(SVN) of the driver update runtime code. + * @platform_id: A buffer containing a platform ID GUID. + * @oem_id: A buffer containing an OEM ID GUID. + * @oem_info_len: Length of the buffer containing the vendor specific information. + */ +struct pfru_update_cap_info { + __u32 status; + __u32 update_cap; + + __u8 code_type[16]; + __u32 fw_version; + __u32 code_rt_version; + + __u8 drv_type[16]; + __u32 drv_rt_version; + __u32 drv_svn; + + __u8 platform_id[16]; + __u8 oem_id[16]; + + __u32 oem_info_len; +}; + +/** + * struct pfru_com_buf_info - Communication buffer information. + * + * @status: Indicator of whether this query succeed. + * @ext_status: Implementation specific query result. + * @addr_lo: Low 32bit physical address of the communication buffer to hold + * a runtime update package. + * @addr_hi: High 32bit physical address of the communication buffer to hold + * a runtime update package. + * @buf_size: Maximum size in bytes of the communication buffer. + */ +struct pfru_com_buf_info { + __u32 status; + __u32 ext_status; + __u64 addr_lo; + __u64 addr_hi; + __u32 buf_size; +}; + +/** + * struct pfru_updated_result - Platform firmware runtime update result information. + * @status: Indicator of whether this update succeed. + * @ext_status: Implementation specific update result. + * @low_auth_time: Low 32bit value of image authentication time in nanosecond. + * @high_auth_time: High 32bit value of image authentication time in nanosecond. + * @low_exec_time: Low 32bit value of image execution time in nanosecond. + * @high_exec_time: High 32bit value of image execution time in nanosecond. + */ +struct pfru_updated_result { + __u32 status; + __u32 ext_status; + __u64 low_auth_time; + __u64 high_auth_time; + __u64 low_exec_time; + __u64 high_exec_time; +}; + +/** + * struct pfrt_log_data_info - Log Data from telemetry service. + * @status: Indicator of whether this update succeed. + * @ext_status: Implementation specific update result. + * @chunk1_addr_lo: Low 32bit physical address of the telemetry data chunk1 + * starting address. + * @chunk1_addr_hi: High 32bit physical address of the telemetry data chunk1 + * starting address. + * @chunk2_addr_lo: Low 32bit physical address of the telemetry data chunk2 + * starting address. + * @chunk2_addr_hi: High 32bit physical address of the telemetry data chunk2 + * starting address. + * @max_data_size: Maximum supported size of data of all data chunks combined. + * @chunk1_size: Data size in bytes of the telemetry data chunk1 buffer. + * @chunk2_size: Data size in bytes of the telemetry data chunk2 buffer. + * @rollover_cnt: Number of times telemetry data buffer is overwritten + * since telemetry buffer reset. + * @reset_cnt: Number of times telemetry services resets that results in + * rollover count and data chunk buffers are reset. + */ +struct pfrt_log_data_info { + __u32 status; + __u32 ext_status; + __u64 chunk1_addr_lo; + __u64 chunk1_addr_hi; + __u64 chunk2_addr_lo; + __u64 chunk2_addr_hi; + __u32 max_data_size; + __u32 chunk1_size; + __u32 chunk2_size; + __u32 rollover_cnt; + __u32 reset_cnt; +}; + +/** + * struct pfrt_log_info - Telemetry log information. + * @log_level: The telemetry log level. + * @log_type: The telemetry log type(history and execution). + * @log_revid: The telemetry log revision id. + */ +struct pfrt_log_info { + __u32 log_level; + __u32 log_type; + __u32 log_revid; +}; + +/** + * PFRT_LOG_IOC_SET_INFO - _IOW(PFRUT_IOCTL_MAGIC, 0x06, + * struct pfrt_log_info) + * + * Return: + * * 0 - success + * * -EFAULT - fail to get the setting parameter + * * -EINVAL - fail to set the log level + * + * Set the PFRT log level and log type. The input information is + * a struct pfrt_log_info. + */ +#define PFRT_LOG_IOC_SET_INFO _IOW(PFRUT_IOCTL_MAGIC, 0x06, struct pfrt_log_info) + +/** + * PFRT_LOG_IOC_GET_INFO - _IOR(PFRUT_IOCTL_MAGIC, 0x07, + * struct pfrt_log_info) + * + * Return: + * * 0 - success + * * -EINVAL - fail to get the log level + * * -EFAULT - fail to copy the result back to userspace + * + * Retrieve log level and log type of the telemetry. The information is + * a struct pfrt_log_info. + */ +#define PFRT_LOG_IOC_GET_INFO _IOR(PFRUT_IOCTL_MAGIC, 0x07, struct pfrt_log_info) + +/** + * PFRT_LOG_IOC_GET_DATA_INFO - _IOR(PFRUT_IOCTL_MAGIC, 0x08, + * struct pfrt_log_data_info) + * + * Return: + * * 0 - success + * * -EINVAL - fail to get the log buffer information + * * -EFAULT - fail to copy the log buffer information to userspace + * + * Retrieve data information about the telemetry. The information + * is a struct pfrt_log_data_info. + */ +#define PFRT_LOG_IOC_GET_DATA_INFO _IOR(PFRUT_IOCTL_MAGIC, 0x08, struct pfrt_log_data_info) + +#endif /* __PFRUT_H__ */ diff --git a/linux-headers/include/linux/pkt_cls.h b/linux-headers/include/linux/pkt_cls.h index ee95f42fb0e..c7082cc60d2 100644 --- a/linux-headers/include/linux/pkt_cls.h +++ b/linux-headers/include/linux/pkt_cls.h @@ -19,12 +19,16 @@ enum { TCA_ACT_FLAGS, TCA_ACT_HW_STATS, TCA_ACT_USED_HW_STATS, + TCA_ACT_IN_HW_COUNT, __TCA_ACT_MAX }; -#define TCA_ACT_FLAGS_NO_PERCPU_STATS 1 /* Don't use percpu allocator for - * actions stats. - */ +/* See other TCA_ACT_FLAGS_ * flags in include/net/act_api.h. */ +#define TCA_ACT_FLAGS_NO_PERCPU_STATS (1 << 0) /* Don't use percpu allocator for + * actions stats. + */ +#define TCA_ACT_FLAGS_SKIP_HW (1 << 1) /* don't offload action to HW */ +#define TCA_ACT_FLAGS_SKIP_SW (1 << 2) /* don't use action in SW */ /* tca HW stats type * When user does not pass the attribute, he does not care. @@ -190,6 +194,8 @@ enum { TCA_POLICE_PAD, TCA_POLICE_RATE64, TCA_POLICE_PEAKRATE64, + TCA_POLICE_PKTRATE64, + TCA_POLICE_PKTBURST64, __TCA_POLICE_MAX #define TCA_POLICE_RESULT TCA_POLICE_RESULT }; @@ -250,7 +256,7 @@ struct tc_u32_sel { short hoff; __be32 hmask; - struct tc_u32_key keys[0]; + struct tc_u32_key keys[]; }; struct tc_u32_mark { @@ -262,7 +268,7 @@ struct tc_u32_mark { struct tc_u32_pcnt { __u64 rcnt; __u64 rhit; - __u64 kcnts[0]; + __u64 kcnts[]; }; /* Flags */ @@ -581,6 +587,20 @@ enum { TCA_FLOWER_KEY_HASH, /* u32 */ TCA_FLOWER_KEY_HASH_MASK, /* u32 */ + TCA_FLOWER_KEY_NUM_OF_VLANS, /* u8 */ + + TCA_FLOWER_KEY_PPPOE_SID, /* be16 */ + TCA_FLOWER_KEY_PPP_PROTO, /* be16 */ + + TCA_FLOWER_KEY_L2TPV3_SID, /* be32 */ + + TCA_FLOWER_L2_MISS, /* u8 */ + + TCA_FLOWER_KEY_CFM, /* nested */ + + TCA_FLOWER_KEY_SPI, /* be32 */ + TCA_FLOWER_KEY_SPI_MASK, /* be32 */ + __TCA_FLOWER_MAX, }; @@ -591,6 +611,9 @@ enum { TCA_FLOWER_KEY_CT_FLAGS_ESTABLISHED = 1 << 1, /* Part of an existing connection. */ TCA_FLOWER_KEY_CT_FLAGS_RELATED = 1 << 2, /* Related to an established connection. */ TCA_FLOWER_KEY_CT_FLAGS_TRACKED = 1 << 3, /* Conntrack has occurred. */ + TCA_FLOWER_KEY_CT_FLAGS_INVALID = 1 << 4, /* Conntrack is invalid. */ + TCA_FLOWER_KEY_CT_FLAGS_REPLY = 1 << 5, /* Packet is in the reply direction. */ + __TCA_FLOWER_KEY_CT_FLAGS_MAX, }; enum { @@ -607,6 +630,10 @@ enum { * TCA_FLOWER_KEY_ENC_OPT_ERSPAN_ * attributes */ + TCA_FLOWER_KEY_ENC_OPTS_GTP, /* Nested + * TCA_FLOWER_KEY_ENC_OPT_GTP_ + * attributes + */ __TCA_FLOWER_KEY_ENC_OPTS_MAX, }; @@ -645,6 +672,17 @@ enum { #define TCA_FLOWER_KEY_ENC_OPT_ERSPAN_MAX \ (__TCA_FLOWER_KEY_ENC_OPT_ERSPAN_MAX - 1) +enum { + TCA_FLOWER_KEY_ENC_OPT_GTP_UNSPEC, + TCA_FLOWER_KEY_ENC_OPT_GTP_PDU_TYPE, /* u8 */ + TCA_FLOWER_KEY_ENC_OPT_GTP_QFI, /* u8 */ + + __TCA_FLOWER_KEY_ENC_OPT_GTP_MAX, +}; + +#define TCA_FLOWER_KEY_ENC_OPT_GTP_MAX \ + (__TCA_FLOWER_KEY_ENC_OPT_GTP_MAX - 1) + enum { TCA_FLOWER_KEY_MPLS_OPTS_UNSPEC, TCA_FLOWER_KEY_MPLS_OPTS_LSE, @@ -671,6 +709,15 @@ enum { TCA_FLOWER_KEY_FLAGS_FRAG_IS_FIRST = (1 << 1), }; +enum { + TCA_FLOWER_KEY_CFM_OPT_UNSPEC, + TCA_FLOWER_KEY_CFM_MD_LEVEL, + TCA_FLOWER_KEY_CFM_OPCODE, + __TCA_FLOWER_KEY_CFM_OPT_MAX, +}; + +#define TCA_FLOWER_KEY_CFM_OPT_MAX (__TCA_FLOWER_KEY_CFM_OPT_MAX - 1) + #define TCA_FLOWER_MASK_FLAGS_RANGE (1 << 0) /* Range-based match */ /* Match-all classifier */ diff --git a/linux-headers/include/linux/pkt_sched.h b/linux-headers/include/linux/pkt_sched.h index 9e7c2c60784..3f85ae57805 100644 --- a/linux-headers/include/linux/pkt_sched.h +++ b/linux-headers/include/linux/pkt_sched.h @@ -434,6 +434,7 @@ enum { TCA_HTB_RATE64, TCA_HTB_CEIL64, TCA_HTB_PAD, + TCA_HTB_OFFLOAD, __TCA_HTB_MAX, }; @@ -602,6 +603,7 @@ enum { TCA_NETEM_JITTER64, TCA_NETEM_SLOT, TCA_NETEM_SLOT_DIST, + TCA_NETEM_PRNG_SEED, __TCA_NETEM_MAX, }; @@ -718,6 +720,11 @@ enum { #define __TC_MQPRIO_SHAPER_MAX (__TC_MQPRIO_SHAPER_MAX - 1) +enum { + TC_FP_EXPRESS = 1, + TC_FP_PREEMPTIBLE = 2, +}; + struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_QOPT_BITMASK + 1]; @@ -731,12 +738,23 @@ struct tc_mqprio_qopt { #define TC_MQPRIO_F_MIN_RATE 0x4 #define TC_MQPRIO_F_MAX_RATE 0x8 +enum { + TCA_MQPRIO_TC_ENTRY_UNSPEC, + TCA_MQPRIO_TC_ENTRY_INDEX, /* u32 */ + TCA_MQPRIO_TC_ENTRY_FP, /* u32 */ + + /* add new constants above here */ + __TCA_MQPRIO_TC_ENTRY_CNT, + TCA_MQPRIO_TC_ENTRY_MAX = (__TCA_MQPRIO_TC_ENTRY_CNT - 1) +}; + enum { TCA_MQPRIO_UNSPEC, TCA_MQPRIO_MODE, TCA_MQPRIO_SHAPER, TCA_MQPRIO_MIN_RATE64, TCA_MQPRIO_MAX_RATE64, + TCA_MQPRIO_TC_ENTRY, __TCA_MQPRIO_MAX, }; @@ -826,6 +844,8 @@ struct tc_codel_xstats { /* FQ_CODEL */ +#define FQ_CODEL_QUANTUM_MAX (1 << 20) + enum { TCA_FQ_CODEL_UNSPEC, TCA_FQ_CODEL_TARGET, @@ -837,6 +857,8 @@ enum { TCA_FQ_CODEL_CE_THRESHOLD, TCA_FQ_CODEL_DROP_BATCH_SIZE, TCA_FQ_CODEL_MEMORY_LIMIT, + TCA_FQ_CODEL_CE_THRESHOLD_SELECTOR, + TCA_FQ_CODEL_CE_THRESHOLD_MASK, __TCA_FQ_CODEL_MAX }; @@ -1227,6 +1249,27 @@ enum { #define TCA_TAPRIO_ATTR_FLAG_TXTIME_ASSIST _BITUL(0) #define TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD _BITUL(1) +enum { + TCA_TAPRIO_TC_ENTRY_UNSPEC, + TCA_TAPRIO_TC_ENTRY_INDEX, /* u32 */ + TCA_TAPRIO_TC_ENTRY_MAX_SDU, /* u32 */ + TCA_TAPRIO_TC_ENTRY_FP, /* u32 */ + + /* add new constants above here */ + __TCA_TAPRIO_TC_ENTRY_CNT, + TCA_TAPRIO_TC_ENTRY_MAX = (__TCA_TAPRIO_TC_ENTRY_CNT - 1) +}; + +enum { + TCA_TAPRIO_OFFLOAD_STATS_PAD = 1, /* u64 */ + TCA_TAPRIO_OFFLOAD_STATS_WINDOW_DROPS, /* u64 */ + TCA_TAPRIO_OFFLOAD_STATS_TX_OVERRUNS, /* u64 */ + + /* add new constants above here */ + __TCA_TAPRIO_OFFLOAD_STATS_CNT, + TCA_TAPRIO_OFFLOAD_STATS_MAX = (__TCA_TAPRIO_OFFLOAD_STATS_CNT - 1) +}; + enum { TCA_TAPRIO_ATTR_UNSPEC, TCA_TAPRIO_ATTR_PRIOMAP, /* struct tc_mqprio_qopt */ @@ -1240,6 +1283,7 @@ enum { TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME_EXTENSION, /* s64 */ TCA_TAPRIO_ATTR_FLAGS, /* u32 */ TCA_TAPRIO_ATTR_TXTIME_DELAY, /* u32 */ + TCA_TAPRIO_ATTR_TC_ENTRY, /* nest */ __TCA_TAPRIO_ATTR_MAX, }; diff --git a/linux-headers/include/linux/pktcdvd.h b/linux-headers/include/linux/pktcdvd.h index 6897401a3fb..effb55e7e80 100644 --- a/linux-headers/include/linux/pktcdvd.h +++ b/linux-headers/include/linux/pktcdvd.h @@ -16,6 +16,7 @@ #include /* + * UNUSED: * 1 for normal debug messages, 2 is very verbose. 0 to turn it off. */ #define PACKET_DEBUG 1 @@ -29,17 +30,6 @@ */ #define PACKET_WAIT_TIME (HZ * 5 / 1000) -/* - * use drive write caching -- we need deferred error handling to be - * able to successfully recover with this option (drive will return good - * status as soon as the cdb is validated). - */ -#if defined(CONFIG_CDROM_PKTCDVD_WCACHE) -#define USE_WCACHING 1 -#else -#define USE_WCACHING 0 -#endif - /* * No user-servicable parts beyond this point -> */ diff --git a/linux-headers/include/linux/ppp-ioctl.h b/linux-headers/include/linux/ppp-ioctl.h index b35db9a431d..2daceab1430 100644 --- a/linux-headers/include/linux/ppp-ioctl.h +++ b/linux-headers/include/linux/ppp-ioctl.h @@ -115,6 +115,8 @@ struct pppol2tp_ioc_stats { #define PPPIOCATTCHAN _IOW('t', 56, int) /* attach to ppp channel */ #define PPPIOCGCHAN _IOR('t', 55, int) /* get ppp channel number */ #define PPPIOCGL2TPSTATS _IOR('t', 54, struct pppol2tp_ioc_stats) +#define PPPIOCBRIDGECHAN _IOW('t', 53, int) /* bridge one channel to another */ +#define PPPIOCUNBRIDGECHAN _IO('t', 52) /* unbridge channel */ #define SIOCGPPPSTATS (SIOCDEVPRIVATE + 0) #define SIOCGPPPVER (SIOCDEVPRIVATE + 1) /* NEVER change this!! */ diff --git a/linux-headers/include/linux/pr.h b/linux-headers/include/linux/pr.h index f5d41723840..82c7084249f 100644 --- a/linux-headers/include/linux/pr.h +++ b/linux-headers/include/linux/pr.h @@ -4,6 +4,23 @@ #include +enum pr_status { + PR_STS_SUCCESS = 0x0, + /* + * The following error codes are based on SCSI, because the interface + * was originally created for it and has existing users. + */ + /* Generic device failure. */ + PR_STS_IOERR = 0x2, + PR_STS_RESERVATION_CONFLICT = 0x18, + /* Temporary path failure that can be retried. */ + PR_STS_RETRY_PATH_FAILURE = 0xe0000, + /* The request was failed due to a fast failure timer. */ + PR_STS_PATH_FAST_FAILED = 0xf0000, + /* The path cannot be reached and has been marked as failed. */ + PR_STS_PATH_FAILED = 0x10000, +}; + enum pr_type { PR_WRITE_EXCLUSIVE = 1, PR_EXCLUSIVE_ACCESS = 2, diff --git a/linux-headers/include/linux/prctl.h b/linux-headers/include/linux/prctl.h index 7f0827705c9..3c36aeade99 100644 --- a/linux-headers/include/linux/prctl.h +++ b/linux-headers/include/linux/prctl.h @@ -213,6 +213,7 @@ struct prctl_mm_map { /* Speculation control variants */ # define PR_SPEC_STORE_BYPASS 0 # define PR_SPEC_INDIRECT_BRANCH 1 +# define PR_SPEC_L1D_FLUSH 2 /* Return and control values for PR_SET/GET_SPECULATION_CTRL */ # define PR_SPEC_NOT_AFFECTED 0 # define PR_SPEC_PRCTL (1UL << 0) @@ -234,17 +235,74 @@ struct prctl_mm_map { #define PR_GET_TAGGED_ADDR_CTRL 56 # define PR_TAGGED_ADDR_ENABLE (1UL << 0) /* MTE tag check fault modes */ -# define PR_MTE_TCF_SHIFT 1 -# define PR_MTE_TCF_NONE (0UL << PR_MTE_TCF_SHIFT) -# define PR_MTE_TCF_SYNC (1UL << PR_MTE_TCF_SHIFT) -# define PR_MTE_TCF_ASYNC (2UL << PR_MTE_TCF_SHIFT) -# define PR_MTE_TCF_MASK (3UL << PR_MTE_TCF_SHIFT) +# define PR_MTE_TCF_NONE 0UL +# define PR_MTE_TCF_SYNC (1UL << 1) +# define PR_MTE_TCF_ASYNC (1UL << 2) +# define PR_MTE_TCF_MASK (PR_MTE_TCF_SYNC | PR_MTE_TCF_ASYNC) /* MTE tag inclusion mask */ # define PR_MTE_TAG_SHIFT 3 # define PR_MTE_TAG_MASK (0xffffUL << PR_MTE_TAG_SHIFT) +/* Unused; kept only for source compatibility */ +# define PR_MTE_TCF_SHIFT 1 /* Control reclaim behavior when allocating memory */ #define PR_SET_IO_FLUSHER 57 #define PR_GET_IO_FLUSHER 58 +/* Dispatch syscalls to a userspace handler */ +#define PR_SET_SYSCALL_USER_DISPATCH 59 +# define PR_SYS_DISPATCH_OFF 0 +# define PR_SYS_DISPATCH_ON 1 +/* The control values for the user space selector when dispatch is enabled */ +# define SYSCALL_DISPATCH_FILTER_ALLOW 0 +# define SYSCALL_DISPATCH_FILTER_BLOCK 1 + +/* Set/get enabled arm64 pointer authentication keys */ +#define PR_PAC_SET_ENABLED_KEYS 60 +#define PR_PAC_GET_ENABLED_KEYS 61 + +/* Request the scheduler to share a core */ +#define PR_SCHED_CORE 62 +# define PR_SCHED_CORE_GET 0 +# define PR_SCHED_CORE_CREATE 1 /* create unique core_sched cookie */ +# define PR_SCHED_CORE_SHARE_TO 2 /* push core_sched cookie to pid */ +# define PR_SCHED_CORE_SHARE_FROM 3 /* pull core_sched cookie to pid */ +# define PR_SCHED_CORE_MAX 4 +# define PR_SCHED_CORE_SCOPE_THREAD 0 +# define PR_SCHED_CORE_SCOPE_THREAD_GROUP 1 +# define PR_SCHED_CORE_SCOPE_PROCESS_GROUP 2 + +/* arm64 Scalable Matrix Extension controls */ +/* Flag values must be in sync with SVE versions */ +#define PR_SME_SET_VL 63 /* set task vector length */ +# define PR_SME_SET_VL_ONEXEC (1 << 18) /* defer effect until exec */ +#define PR_SME_GET_VL 64 /* get task vector length */ +/* Bits common to PR_SME_SET_VL and PR_SME_GET_VL */ +# define PR_SME_VL_LEN_MASK 0xffff +# define PR_SME_VL_INHERIT (1 << 17) /* inherit across exec */ + +/* Memory deny write / execute */ +#define PR_SET_MDWE 65 +# define PR_MDWE_REFUSE_EXEC_GAIN 1 + +#define PR_GET_MDWE 66 + +#define PR_SET_VMA 0x53564d41 +# define PR_SET_VMA_ANON_NAME 0 + +#define PR_GET_AUXV 0x41555856 + +#define PR_SET_MEMORY_MERGE 67 +#define PR_GET_MEMORY_MERGE 68 + +#define PR_RISCV_V_SET_CONTROL 69 +#define PR_RISCV_V_GET_CONTROL 70 +# define PR_RISCV_V_VSTATE_CTRL_DEFAULT 0 +# define PR_RISCV_V_VSTATE_CTRL_OFF 1 +# define PR_RISCV_V_VSTATE_CTRL_ON 2 +# define PR_RISCV_V_VSTATE_CTRL_INHERIT (1 << 4) +# define PR_RISCV_V_VSTATE_CTRL_CUR_MASK 0x3 +# define PR_RISCV_V_VSTATE_CTRL_NEXT_MASK 0xc +# define PR_RISCV_V_VSTATE_CTRL_MASK 0x1f + #endif /* _LINUX_PRCTL_H */ diff --git a/linux-headers/include/linux/psample.h b/linux-headers/include/linux/psample.h index aea26ab1431..e585db5bf2d 100644 --- a/linux-headers/include/linux/psample.h +++ b/linux-headers/include/linux/psample.h @@ -3,7 +3,6 @@ #define __UAPI_PSAMPLE_H enum { - /* sampled packet metadata */ PSAMPLE_ATTR_IIFINDEX, PSAMPLE_ATTR_OIFINDEX, PSAMPLE_ATTR_ORIGSIZE, @@ -11,10 +10,15 @@ enum { PSAMPLE_ATTR_GROUP_SEQ, PSAMPLE_ATTR_SAMPLE_RATE, PSAMPLE_ATTR_DATA, + PSAMPLE_ATTR_GROUP_REFCOUNT, PSAMPLE_ATTR_TUNNEL, - /* commands attributes */ - PSAMPLE_ATTR_GROUP_REFCOUNT, + PSAMPLE_ATTR_PAD, + PSAMPLE_ATTR_OUT_TC, /* u16 */ + PSAMPLE_ATTR_OUT_TC_OCC, /* u64, bytes */ + PSAMPLE_ATTR_LATENCY, /* u64, nanoseconds */ + PSAMPLE_ATTR_TIMESTAMP, /* u64, nanoseconds */ + PSAMPLE_ATTR_PROTO, /* u16 */ __PSAMPLE_ATTR_MAX }; diff --git a/linux-headers/include/linux/psci.h b/linux-headers/include/linux/psci.h index a6772d508b2..74f3cb5007c 100644 --- a/linux-headers/include/linux/psci.h +++ b/linux-headers/include/linux/psci.h @@ -48,12 +48,26 @@ #define PSCI_0_2_FN64_MIGRATE_INFO_UP_CPU PSCI_0_2_FN64(7) #define PSCI_1_0_FN_PSCI_FEATURES PSCI_0_2_FN(10) +#define PSCI_1_0_FN_CPU_FREEZE PSCI_0_2_FN(11) +#define PSCI_1_0_FN_CPU_DEFAULT_SUSPEND PSCI_0_2_FN(12) +#define PSCI_1_0_FN_NODE_HW_STATE PSCI_0_2_FN(13) #define PSCI_1_0_FN_SYSTEM_SUSPEND PSCI_0_2_FN(14) #define PSCI_1_0_FN_SET_SUSPEND_MODE PSCI_0_2_FN(15) +#define PSCI_1_0_FN_STAT_RESIDENCY PSCI_0_2_FN(16) +#define PSCI_1_0_FN_STAT_COUNT PSCI_0_2_FN(17) + #define PSCI_1_1_FN_SYSTEM_RESET2 PSCI_0_2_FN(18) +#define PSCI_1_1_FN_MEM_PROTECT PSCI_0_2_FN(19) +#define PSCI_1_1_FN_MEM_PROTECT_CHECK_RANGE PSCI_0_2_FN(20) +#define PSCI_1_0_FN64_CPU_DEFAULT_SUSPEND PSCI_0_2_FN64(12) +#define PSCI_1_0_FN64_NODE_HW_STATE PSCI_0_2_FN64(13) #define PSCI_1_0_FN64_SYSTEM_SUSPEND PSCI_0_2_FN64(14) +#define PSCI_1_0_FN64_STAT_RESIDENCY PSCI_0_2_FN64(16) +#define PSCI_1_0_FN64_STAT_COUNT PSCI_0_2_FN64(17) + #define PSCI_1_1_FN64_SYSTEM_RESET2 PSCI_0_2_FN64(18) +#define PSCI_1_1_FN64_MEM_PROTECT_CHECK_RANGE PSCI_0_2_FN64(20) /* PSCI v0.2 power state encoding for CPU_SUSPEND function */ #define PSCI_0_2_POWER_STATE_ID_MASK 0xffff @@ -82,6 +96,10 @@ #define PSCI_0_2_TOS_UP_NO_MIGRATE 1 #define PSCI_0_2_TOS_MP 2 +/* PSCI v1.1 reset type encoding for SYSTEM_RESET2 */ +#define PSCI_1_1_RESET_TYPE_SYSTEM_WARM_RESET 0 +#define PSCI_1_1_RESET_TYPE_VENDOR_START 0x80000000U + /* PSCI version decoding (independent of PSCI version) */ #define PSCI_VERSION_MAJOR_SHIFT 16 #define PSCI_VERSION_MINOR_MASK \ diff --git a/linux-headers/include/linux/psp-dbc.h b/linux-headers/include/linux/psp-dbc.h new file mode 100644 index 00000000000..9b7b82bd748 --- /dev/null +++ b/linux-headers/include/linux/psp-dbc.h @@ -0,0 +1,147 @@ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ +/* + * Userspace interface for AMD Dynamic Boost Control (DBC) + * + * Copyright (C) 2023 Advanced Micro Devices, Inc. + * + * Author: Mario Limonciello + */ + +#ifndef __PSP_DBC_USER_H__ +#define __PSP_DBC_USER_H__ + +#include + +/** + * DOC: AMD Dynamic Boost Control (DBC) interface + */ + +#define DBC_NONCE_SIZE 16 +#define DBC_SIG_SIZE 32 +#define DBC_UID_SIZE 16 + +/** + * struct dbc_user_nonce - Nonce exchange structure (input/output). + * @auth_needed: Whether the PSP should authenticate this request (input). + * 0: no authentication, PSP will return single use nonce. + * 1: authentication: PSP will return multi-use nonce. + * @nonce: 8 byte value used for future authentication (output). + * @signature: Optional 32 byte signature created by software using a + * previous nonce (input). + */ +struct dbc_user_nonce { + __u32 auth_needed; + __u8 nonce[DBC_NONCE_SIZE]; + __u8 signature[DBC_SIG_SIZE]; +} __attribute__((packed)); + +/** + * struct dbc_user_setuid - UID exchange structure (input). + * @uid: 16 byte value representing software identity + * @signature: 32 byte signature created by software using a previous nonce + */ +struct dbc_user_setuid { + __u8 uid[DBC_UID_SIZE]; + __u8 signature[DBC_SIG_SIZE]; +} __attribute__((packed)); + +/** + * struct dbc_user_param - Parameter exchange structure (input/output). + * @msg_index: Message indicating what parameter to set or get (input) + * @param: 4 byte parameter, units are message specific. (input/output) + * @signature: 32 byte signature. + * - When sending a message this is to be created by software + * using a previous nonce (input) + * - For interpreting results, this signature is updated by the + * PSP to allow software to validate the authenticity of the + * results. + */ +struct dbc_user_param { + __u32 msg_index; + __u32 param; + __u8 signature[DBC_SIG_SIZE]; +} __attribute__((packed)); + +/** + * Dynamic Boost Control (DBC) IOC + * + * possible return codes for all DBC IOCTLs: + * 0: success + * -EINVAL: invalid input + * -E2BIG: excess data passed + * -EFAULT: failed to copy to/from userspace + * -EBUSY: mailbox in recovery or in use + * -ENODEV: driver not bound with PSP device + * -EACCES: request isn't authorized + * -EINVAL: invalid parameter + * -ETIMEDOUT: request timed out + * -EAGAIN: invalid request for state machine + * -ENOENT: not implemented + * -ENFILE: overflow + * -EPERM: invalid signature + * -EIO: unknown error + */ +#define DBC_IOC_TYPE 'D' + +/** + * DBCIOCNONCE - Fetch a nonce from the PSP for authenticating commands. + * If a nonce is fetched without authentication it can only + * be utilized for one command. + * If a nonce is fetched with authentication it can be used + * for multiple requests. + */ +#define DBCIOCNONCE _IOWR(DBC_IOC_TYPE, 0x1, struct dbc_user_nonce) + +/** + * DBCIOCUID - Set the user ID (UID) of a calling process. + * The user ID is 8 bytes long. It must be programmed using a + * 32 byte signature built using the nonce fetched from + * DBCIOCNONCE. + * The UID can only be set once until the system is rebooted. + */ +#define DBCIOCUID _IOW(DBC_IOC_TYPE, 0x2, struct dbc_user_setuid) + +/** + * DBCIOCPARAM - Set or get a parameter from the PSP. + * This request will only work after DBCIOCUID has successfully + * set the UID of the calling process. + * Whether the parameter is set or get is controlled by the + * message ID in the request. + * This command must be sent using a 32 byte signature built + * using the nonce fetched from DBCIOCNONCE. + * When the command succeeds, the 32 byte signature will be + * updated by the PSP for software to authenticate the results. + */ +#define DBCIOCPARAM _IOWR(DBC_IOC_TYPE, 0x3, struct dbc_user_param) + +/** + * enum dbc_cmd_msg - Messages utilized by DBCIOCPARAM + * @PARAM_GET_FMAX_CAP: Get frequency cap (MHz) + * @PARAM_SET_FMAX_CAP: Set frequency cap (MHz) + * @PARAM_GET_PWR_CAP: Get socket power cap (mW) + * @PARAM_SET_PWR_CAP: Set socket power cap (mW) + * @PARAM_GET_GFX_MODE: Get graphics mode (0/1) + * @PARAM_SET_GFX_MODE: Set graphics mode (0/1) + * @PARAM_GET_CURR_TEMP: Get current temperature (degrees C) + * @PARAM_GET_FMAX_MAX: Get maximum allowed value for frequency (MHz) + * @PARAM_GET_FMAX_MIN: Get minimum allowed value for frequency (MHz) + * @PARAM_GET_SOC_PWR_MAX: Get maximum allowed value for SoC power (mw) + * @PARAM_GET_SOC_PWR_MIN: Get minimum allowed value for SoC power (mw) + * @PARAM_GET_SOC_PWR_CUR: Get current value for SoC Power (mW) + */ +enum dbc_cmd_msg { + PARAM_GET_FMAX_CAP = 0x3, + PARAM_SET_FMAX_CAP = 0x4, + PARAM_GET_PWR_CAP = 0x5, + PARAM_SET_PWR_CAP = 0x6, + PARAM_GET_GFX_MODE = 0x7, + PARAM_SET_GFX_MODE = 0x8, + PARAM_GET_CURR_TEMP = 0x9, + PARAM_GET_FMAX_MAX = 0xA, + PARAM_GET_FMAX_MIN = 0xB, + PARAM_GET_SOC_PWR_MAX = 0xC, + PARAM_GET_SOC_PWR_MIN = 0xD, + PARAM_GET_SOC_PWR_CUR = 0xE, +}; + +#endif /* __PSP_DBC_USER_H__ */ diff --git a/linux-headers/include/linux/psp-sev.h b/linux-headers/include/linux/psp-sev.h index 51d8b3940e1..12ccb70099d 100644 --- a/linux-headers/include/linux/psp-sev.h +++ b/linux-headers/include/linux/psp-sev.h @@ -36,6 +36,13 @@ enum { * SEV Firmware status code */ typedef enum { + /* + * This error code is not in the SEV spec. Its purpose is to convey that + * there was an error that prevented the SEV firmware from being called. + * The SEV API error codes are 16 bits, so the -1 value will not overlap + * with possible values from the specification. + */ + SEV_RET_NO_FW_CALL = -1, SEV_RET_SUCCESS = 0, SEV_RET_INVALID_PLATFORM_STATE, SEV_RET_INVALID_GUEST_STATE, diff --git a/linux-headers/include/linux/ptp_clock.h b/linux-headers/include/linux/ptp_clock.h index 1d108d597f6..05cc35fc94a 100644 --- a/linux-headers/include/linux/ptp_clock.h +++ b/linux-headers/include/linux/ptp_clock.h @@ -95,7 +95,8 @@ struct ptp_clock_caps { int cross_timestamping; /* Whether the clock supports adjust phase */ int adjust_phase; - int rsv[12]; /* Reserved for future use. */ + int max_phase_adj; /* Maximum phase adjustment in nanoseconds. */ + int rsv[11]; /* Reserved for future use. */ }; struct ptp_extts_request { diff --git a/linux-headers/include/linux/ptrace.h b/linux-headers/include/linux/ptrace.h index fe5d2a88fee..fbcf69d0723 100644 --- a/linux-headers/include/linux/ptrace.h +++ b/linux-headers/include/linux/ptrace.h @@ -102,9 +102,49 @@ struct ptrace_syscall_info { }; }; +#define PTRACE_GET_RSEQ_CONFIGURATION 0x420f + +struct ptrace_rseq_configuration { + __u64 rseq_abi_pointer; + __u32 rseq_abi_size; + __u32 signature; + __u32 flags; + __u32 pad; +}; + +#define PTRACE_SET_SYSCALL_USER_DISPATCH_CONFIG 0x4210 +#define PTRACE_GET_SYSCALL_USER_DISPATCH_CONFIG 0x4211 + +/* + * struct ptrace_sud_config - Per-task configuration for Syscall User Dispatch + * @mode: One of PR_SYS_DISPATCH_ON or PR_SYS_DISPATCH_OFF + * @selector: Tracees user virtual address of SUD selector + * @offset: SUD exclusion area (virtual address) + * @len: Length of SUD exclusion area + * + * Used to get/set the syscall user dispatch configuration for a tracee. + * Selector is optional (may be NULL), and if invalid will produce + * a SIGSEGV in the tracee upon first access. + * + * If mode is PR_SYS_DISPATCH_ON, syscall dispatch will be enabled. If + * PR_SYS_DISPATCH_OFF, syscall dispatch will be disabled and all other + * parameters must be 0. The value in *selector (if not null), also determines + * whether syscall dispatch will occur. + * + * The Syscall User Dispatch Exclusion area described by offset/len is the + * virtual address space from which syscalls will not produce a user + * dispatch. + */ +struct ptrace_sud_config { + __u64 mode; + __u64 selector; + __u64 offset; + __u64 len; +}; + /* * These values are stored in task->ptrace_message - * by tracehook_report_syscall_* to describe the current syscall-stop. + * by ptrace_stop to describe the current syscall-stop. */ #define PTRACE_EVENTMSG_SYSCALL_ENTRY 1 #define PTRACE_EVENTMSG_SYSCALL_EXIT 2 diff --git a/linux-headers/include/linux/quota.h b/linux-headers/include/linux/quota.h index 1305380d6c9..193872508e2 100644 --- a/linux-headers/include/linux/quota.h +++ b/linux-headers/include/linux/quota.h @@ -77,6 +77,7 @@ #define QFMT_VFS_V0 2 #define QFMT_OCFS2 3 #define QFMT_VFS_V1 4 +#define QFMT_SHMEM 5 /* Size of block in which space limits are passed through the quota * interface */ diff --git a/linux-headers/include/linux/raid/md_p.h b/linux-headers/include/linux/raid/md_p.h index 8b9de3702ff..c9b584c942f 100644 --- a/linux-headers/include/linux/raid/md_p.h +++ b/linux-headers/include/linux/raid/md_p.h @@ -303,7 +303,7 @@ struct mdp_superblock_1 { * into the 'roles' value. If a device is spare or faulty, then it doesn't * have a meaningful role. */ - __le16 dev_roles[0]; /* role in array, or 0xffff for a spare, or 0xfffe for faulty */ + __le16 dev_roles[]; /* role in array, or 0xffff for a spare, or 0xfffe for faulty */ }; /* feature_map bits */ diff --git a/linux-headers/include/linux/random.h b/linux-headers/include/linux/random.h index b3f39c3595b..cb42c28c70f 100644 --- a/linux-headers/include/linux/random.h +++ b/linux-headers/include/linux/random.h @@ -41,7 +41,7 @@ struct rand_pool_info { int entropy_count; int buf_size; - __u32 buf[0]; + __u32 buf[]; }; /* diff --git a/linux-headers/include/linux/raw.h b/linux-headers/include/linux/raw.h deleted file mode 100644 index 47874919d0b..00000000000 --- a/linux-headers/include/linux/raw.h +++ /dev/null @@ -1,17 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef __LINUX_RAW_H -#define __LINUX_RAW_H - -#include - -#define RAW_SETBIND _IO( 0xac, 0 ) -#define RAW_GETBIND _IO( 0xac, 1 ) - -struct raw_config_request -{ - int raw_minor; - __u64 block_major; - __u64 block_minor; -}; - -#endif /* __LINUX_RAW_H */ diff --git a/linux-headers/include/linux/reiserfs_xattr.h b/linux-headers/include/linux/reiserfs_xattr.h index 28f10842f04..503ad018ce5 100644 --- a/linux-headers/include/linux/reiserfs_xattr.h +++ b/linux-headers/include/linux/reiserfs_xattr.h @@ -19,7 +19,7 @@ struct reiserfs_xattr_header { struct reiserfs_security_handle { const char *name; void *value; - size_t length; + __kernel_size_t length; }; #endif /* _LINUX_REISERFS_XATTR_H */ diff --git a/linux-headers/include/linux/resource.h b/linux-headers/include/linux/resource.h index eef1649b38e..38eb137bd2d 100644 --- a/linux-headers/include/linux/resource.h +++ b/linux-headers/include/linux/resource.h @@ -66,10 +66,17 @@ struct rlimit64 { #define _STK_LIM (8*1024*1024) /* - * GPG2 wants 64kB of mlocked memory, to make sure pass phrases - * and other sensitive information are never written to disk. + * Limit the amount of locked memory by some sane default: + * root can always increase this limit if needed. + * + * The main use-cases are (1) preventing sensitive memory + * from being swapped; (2) real-time operations; (3) via + * IOURING_REGISTER_BUFFERS. + * + * The first two don't need much. The latter will take as + * much as it can get. 8MB is a reasonably sane default. */ -#define MLOCK_LIMIT ((PAGE_SIZE > 64*1024) ? PAGE_SIZE : 64*1024) +#define MLOCK_LIMIT (8*1024*1024) /* * Due to binary compatibility, the actual resource numbers diff --git a/linux-headers/include/linux/rfkill.h b/linux-headers/include/linux/rfkill.h index 09f86fcc643..309feeda7e3 100644 --- a/linux-headers/include/linux/rfkill.h +++ b/linux-headers/include/linux/rfkill.h @@ -69,6 +69,16 @@ enum rfkill_operation { RFKILL_OP_CHANGE_ALL, }; +/** + * enum rfkill_hard_block_reasons - hard block reasons + * @RFKILL_HARD_BLOCK_SIGNAL: the hardware rfkill signal is active + * @RFKILL_HARD_BLOCK_NOT_OWNER: the NIC is not owned by the host + */ +enum rfkill_hard_block_reasons { + RFKILL_HARD_BLOCK_SIGNAL = 1 << 0, + RFKILL_HARD_BLOCK_NOT_OWNER = 1 << 1, +}; + /** * struct rfkill_event - events for userspace on /dev/rfkill * @idx: index of dev rfkill @@ -84,27 +94,97 @@ struct rfkill_event { __u32 idx; __u8 type; __u8 op; - __u8 soft, hard; + __u8 soft; + __u8 hard; } __attribute__((packed)); -/* - * We are planning to be backward and forward compatible with changes - * to the event struct, by adding new, optional, members at the end. - * When reading an event (whether the kernel from userspace or vice - * versa) we need to accept anything that's at least as large as the - * version 1 event size, but might be able to accept other sizes in - * the future. - * - * One exception is the kernel -- we already have two event sizes in - * that we've made the 'hard' member optional since our only option - * is to ignore it anyway. +/** + * struct rfkill_event_ext - events for userspace on /dev/rfkill + * @idx: index of dev rfkill + * @type: type of the rfkill struct + * @op: operation code + * @hard: hard state (0/1) + * @soft: soft state (0/1) + * @hard_block_reasons: valid if hard is set. One or several reasons from + * &enum rfkill_hard_block_reasons. + * + * Structure used for userspace communication on /dev/rfkill, + * used for events from the kernel and control to the kernel. + * + * See the extensibility docs below. + */ +struct rfkill_event_ext { + __u32 idx; + __u8 type; + __u8 op; + __u8 soft; + __u8 hard; + + /* + * older kernels will accept/send only up to this point, + * and if extended further up to any chunk marked below + */ + + __u8 hard_block_reasons; +} __attribute__((packed)); + +/** + * DOC: Extensibility + * + * Originally, we had planned to allow backward and forward compatible + * changes by just adding fields at the end of the structure that are + * then not reported on older kernels on read(), and not written to by + * older kernels on write(), with the kernel reporting the size it did + * accept as the result. + * + * This would have allowed userspace to detect on read() and write() + * which kernel structure version it was dealing with, and if was just + * recompiled it would have gotten the new fields, but obviously not + * accessed them, but things should've continued to work. + * + * Unfortunately, while actually exercising this mechanism to add the + * hard block reasons field, we found that userspace (notably systemd) + * did all kinds of fun things not in line with this scheme: + * + * 1. treat the (expected) short writes as an error; + * 2. ask to read sizeof(struct rfkill_event) but then compare the + * actual return value to RFKILL_EVENT_SIZE_V1 and treat any + * mismatch as an error. + * + * As a consequence, just recompiling with a new struct version caused + * things to no longer work correctly on old and new kernels. + * + * Hence, we've rolled back &struct rfkill_event to the original version + * and added &struct rfkill_event_ext. This effectively reverts to the + * old behaviour for all userspace, unless it explicitly opts in to the + * rules outlined here by using the new &struct rfkill_event_ext. + * + * Additionally, some other userspace (bluez, g-s-d) was reading with a + * large size but as streaming reads rather than message-based, or with + * too strict checks for the returned size. So eventually, we completely + * reverted this, and extended messages need to be opted in to by using + * an ioctl: + * + * ioctl(fd, RFKILL_IOCTL_MAX_SIZE, sizeof(struct rfkill_event_ext)); + * + * Userspace using &struct rfkill_event_ext and the ioctl must adhere to + * the following rules: + * + * 1. accept short writes, optionally using them to detect that it's + * running on an older kernel; + * 2. accept short reads, knowing that this means it's running on an + * older kernel; + * 3. treat reads that are as long as requested as acceptable, not + * checking against RFKILL_EVENT_SIZE_V1 or such. */ -#define RFKILL_EVENT_SIZE_V1 8 +#define RFKILL_EVENT_SIZE_V1 sizeof(struct rfkill_event) /* ioctl for turning off rfkill-input (if present) */ #define RFKILL_IOC_MAGIC 'R' #define RFKILL_IOC_NOINPUT 1 #define RFKILL_IOCTL_NOINPUT _IO(RFKILL_IOC_MAGIC, RFKILL_IOC_NOINPUT) +#define RFKILL_IOC_MAX_SIZE 2 +#define RFKILL_IOCTL_MAX_SIZE _IOW(RFKILL_IOC_MAGIC, RFKILL_IOC_MAX_SIZE, __u32) /* and that's all userspace gets */ diff --git a/linux-headers/include/linux/rkisp1-config.h b/linux-headers/include/linux/rkisp1-config.h new file mode 100644 index 00000000000..ec7cde8cd2e --- /dev/null +++ b/linux-headers/include/linux/rkisp1-config.h @@ -0,0 +1,995 @@ +/* SPDX-License-Identifier: ((GPL-2.0+ WITH Linux-syscall-note) OR MIT) */ +/* + * Rockchip ISP1 userspace API + * Copyright (C) 2017 Rockchip Electronics Co., Ltd. + */ + +#ifndef _RKISP1_CONFIG_H +#define _RKISP1_CONFIG_H + +#include + +/* Defect Pixel Cluster Detection */ +#define RKISP1_CIF_ISP_MODULE_DPCC (1U << 0) +/* Black Level Subtraction */ +#define RKISP1_CIF_ISP_MODULE_BLS (1U << 1) +/* Sensor De-gamma */ +#define RKISP1_CIF_ISP_MODULE_SDG (1U << 2) +/* Histogram statistics configuration */ +#define RKISP1_CIF_ISP_MODULE_HST (1U << 3) +/* Lens Shade Control */ +#define RKISP1_CIF_ISP_MODULE_LSC (1U << 4) +/* Auto White Balance Gain */ +#define RKISP1_CIF_ISP_MODULE_AWB_GAIN (1U << 5) +/* Filter */ +#define RKISP1_CIF_ISP_MODULE_FLT (1U << 6) +/* Bayer Demosaic */ +#define RKISP1_CIF_ISP_MODULE_BDM (1U << 7) +/* Cross Talk */ +#define RKISP1_CIF_ISP_MODULE_CTK (1U << 8) +/* Gamma Out Curve */ +#define RKISP1_CIF_ISP_MODULE_GOC (1U << 9) +/* Color Processing */ +#define RKISP1_CIF_ISP_MODULE_CPROC (1U << 10) +/* Auto Focus Control statistics configuration */ +#define RKISP1_CIF_ISP_MODULE_AFC (1U << 11) +/* Auto White Balancing statistics configuration */ +#define RKISP1_CIF_ISP_MODULE_AWB (1U << 12) +/* Image Effect */ +#define RKISP1_CIF_ISP_MODULE_IE (1U << 13) +/* Auto Exposure Control statistics configuration */ +#define RKISP1_CIF_ISP_MODULE_AEC (1U << 14) +/* Wide Dynamic Range */ +#define RKISP1_CIF_ISP_MODULE_WDR (1U << 15) +/* Denoise Pre-Filter */ +#define RKISP1_CIF_ISP_MODULE_DPF (1U << 16) +/* Denoise Pre-Filter Strength */ +#define RKISP1_CIF_ISP_MODULE_DPF_STRENGTH (1U << 17) + +#define RKISP1_CIF_ISP_CTK_COEFF_MAX 0x100 +#define RKISP1_CIF_ISP_CTK_OFFSET_MAX 0x800 + +#define RKISP1_CIF_ISP_AE_MEAN_MAX_V10 25 +#define RKISP1_CIF_ISP_AE_MEAN_MAX_V12 81 +#define RKISP1_CIF_ISP_AE_MEAN_MAX RKISP1_CIF_ISP_AE_MEAN_MAX_V12 + +#define RKISP1_CIF_ISP_HIST_BIN_N_MAX_V10 16 +#define RKISP1_CIF_ISP_HIST_BIN_N_MAX_V12 32 +#define RKISP1_CIF_ISP_HIST_BIN_N_MAX RKISP1_CIF_ISP_HIST_BIN_N_MAX_V12 + +#define RKISP1_CIF_ISP_AFM_MAX_WINDOWS 3 +#define RKISP1_CIF_ISP_DEGAMMA_CURVE_SIZE 17 + +#define RKISP1_CIF_ISP_BDM_MAX_TH 0xff + +/* + * Black level compensation + */ +/* maximum value for horizontal start address */ +#define RKISP1_CIF_ISP_BLS_START_H_MAX 0x00000fff +/* maximum value for horizontal stop address */ +#define RKISP1_CIF_ISP_BLS_STOP_H_MAX 0x00000fff +/* maximum value for vertical start address */ +#define RKISP1_CIF_ISP_BLS_START_V_MAX 0x00000fff +/* maximum value for vertical stop address */ +#define RKISP1_CIF_ISP_BLS_STOP_V_MAX 0x00000fff +/* maximum is 2^18 = 262144*/ +#define RKISP1_CIF_ISP_BLS_SAMPLES_MAX 0x00000012 +/* maximum value for fixed black level */ +#define RKISP1_CIF_ISP_BLS_FIX_SUB_MAX 0x00000fff +/* minimum value for fixed black level */ +#define RKISP1_CIF_ISP_BLS_FIX_SUB_MIN 0xfffff000 +/* 13 bit range (signed)*/ +#define RKISP1_CIF_ISP_BLS_FIX_MASK 0x00001fff + +/* + * Automatic white balance measurements + */ +#define RKISP1_CIF_ISP_AWB_MAX_GRID 1 +#define RKISP1_CIF_ISP_AWB_MAX_FRAMES 7 + +/* + * Gamma out + */ +/* Maximum number of color samples supported */ +#define RKISP1_CIF_ISP_GAMMA_OUT_MAX_SAMPLES_V10 17 +#define RKISP1_CIF_ISP_GAMMA_OUT_MAX_SAMPLES_V12 34 +#define RKISP1_CIF_ISP_GAMMA_OUT_MAX_SAMPLES RKISP1_CIF_ISP_GAMMA_OUT_MAX_SAMPLES_V12 + +/* + * Lens shade correction + */ +#define RKISP1_CIF_ISP_LSC_SECTORS_TBL_SIZE 8 + +/* + * The following matches the tuning process, + * not the max capabilities of the chip. + */ +#define RKISP1_CIF_ISP_LSC_SAMPLES_MAX 17 + +/* + * Histogram calculation + */ +#define RKISP1_CIF_ISP_HISTOGRAM_WEIGHT_GRIDS_SIZE_V10 25 +#define RKISP1_CIF_ISP_HISTOGRAM_WEIGHT_GRIDS_SIZE_V12 81 +#define RKISP1_CIF_ISP_HISTOGRAM_WEIGHT_GRIDS_SIZE RKISP1_CIF_ISP_HISTOGRAM_WEIGHT_GRIDS_SIZE_V12 + +/* + * Defect Pixel Cluster Correction + */ +#define RKISP1_CIF_ISP_DPCC_METHODS_MAX 3 + +#define RKISP1_CIF_ISP_DPCC_MODE_STAGE1_ENABLE (1U << 2) + +#define RKISP1_CIF_ISP_DPCC_OUTPUT_MODE_STAGE1_INCL_G_CENTER (1U << 0) +#define RKISP1_CIF_ISP_DPCC_OUTPUT_MODE_STAGE1_INCL_RB_CENTER (1U << 1) +#define RKISP1_CIF_ISP_DPCC_OUTPUT_MODE_STAGE1_G_3X3 (1U << 2) +#define RKISP1_CIF_ISP_DPCC_OUTPUT_MODE_STAGE1_RB_3X3 (1U << 3) + +/* 0-2 for sets 1-3 */ +#define RKISP1_CIF_ISP_DPCC_SET_USE_STAGE1_USE_SET(n) ((n) << 0) +#define RKISP1_CIF_ISP_DPCC_SET_USE_STAGE1_USE_FIX_SET (1U << 3) + +#define RKISP1_CIF_ISP_DPCC_METHODS_SET_PG_GREEN_ENABLE (1U << 0) +#define RKISP1_CIF_ISP_DPCC_METHODS_SET_LC_GREEN_ENABLE (1U << 1) +#define RKISP1_CIF_ISP_DPCC_METHODS_SET_RO_GREEN_ENABLE (1U << 2) +#define RKISP1_CIF_ISP_DPCC_METHODS_SET_RND_GREEN_ENABLE (1U << 3) +#define RKISP1_CIF_ISP_DPCC_METHODS_SET_RG_GREEN_ENABLE (1U << 4) +#define RKISP1_CIF_ISP_DPCC_METHODS_SET_PG_RED_BLUE_ENABLE (1U << 8) +#define RKISP1_CIF_ISP_DPCC_METHODS_SET_LC_RED_BLUE_ENABLE (1U << 9) +#define RKISP1_CIF_ISP_DPCC_METHODS_SET_RO_RED_BLUE_ENABLE (1U << 10) +#define RKISP1_CIF_ISP_DPCC_METHODS_SET_RND_RED_BLUE_ENABLE (1U << 11) +#define RKISP1_CIF_ISP_DPCC_METHODS_SET_RG_RED_BLUE_ENABLE (1U << 12) + +#define RKISP1_CIF_ISP_DPCC_LINE_THRESH_G(v) ((v) << 0) +#define RKISP1_CIF_ISP_DPCC_LINE_THRESH_RB(v) ((v) << 8) +#define RKISP1_CIF_ISP_DPCC_LINE_MAD_FAC_G(v) ((v) << 0) +#define RKISP1_CIF_ISP_DPCC_LINE_MAD_FAC_RB(v) ((v) << 8) +#define RKISP1_CIF_ISP_DPCC_PG_FAC_G(v) ((v) << 0) +#define RKISP1_CIF_ISP_DPCC_PG_FAC_RB(v) ((v) << 8) +#define RKISP1_CIF_ISP_DPCC_RND_THRESH_G(v) ((v) << 0) +#define RKISP1_CIF_ISP_DPCC_RND_THRESH_RB(v) ((v) << 8) +#define RKISP1_CIF_ISP_DPCC_RG_FAC_G(v) ((v) << 0) +#define RKISP1_CIF_ISP_DPCC_RG_FAC_RB(v) ((v) << 8) + +#define RKISP1_CIF_ISP_DPCC_RO_LIMITS_n_G(n, v) ((v) << ((n) * 4)) +#define RKISP1_CIF_ISP_DPCC_RO_LIMITS_n_RB(n, v) ((v) << ((n) * 4 + 2)) + +#define RKISP1_CIF_ISP_DPCC_RND_OFFS_n_G(n, v) ((v) << ((n) * 4)) +#define RKISP1_CIF_ISP_DPCC_RND_OFFS_n_RB(n, v) ((v) << ((n) * 4 + 2)) + +/* + * Denoising pre filter + */ +#define RKISP1_CIF_ISP_DPF_MAX_NLF_COEFFS 17 +#define RKISP1_CIF_ISP_DPF_MAX_SPATIAL_COEFFS 6 + +/* + * Measurement types + */ +#define RKISP1_CIF_ISP_STAT_AWB (1U << 0) +#define RKISP1_CIF_ISP_STAT_AUTOEXP (1U << 1) +#define RKISP1_CIF_ISP_STAT_AFM (1U << 2) +#define RKISP1_CIF_ISP_STAT_HIST (1U << 3) + +/** + * enum rkisp1_cif_isp_version - ISP variants + * + * @RKISP1_V10: used at least in rk3288 and rk3399 + * @RKISP1_V11: declared in the original vendor code, but not used + * @RKISP1_V12: used at least in rk3326 and px30 + * @RKISP1_V13: used at least in rk1808 + */ +enum rkisp1_cif_isp_version { + RKISP1_V10 = 10, + RKISP1_V11, + RKISP1_V12, + RKISP1_V13, +}; + +enum rkisp1_cif_isp_histogram_mode { + RKISP1_CIF_ISP_HISTOGRAM_MODE_DISABLE, + RKISP1_CIF_ISP_HISTOGRAM_MODE_RGB_COMBINED, + RKISP1_CIF_ISP_HISTOGRAM_MODE_R_HISTOGRAM, + RKISP1_CIF_ISP_HISTOGRAM_MODE_G_HISTOGRAM, + RKISP1_CIF_ISP_HISTOGRAM_MODE_B_HISTOGRAM, + RKISP1_CIF_ISP_HISTOGRAM_MODE_Y_HISTOGRAM +}; + +enum rkisp1_cif_isp_awb_mode_type { + RKISP1_CIF_ISP_AWB_MODE_MANUAL, + RKISP1_CIF_ISP_AWB_MODE_RGB, + RKISP1_CIF_ISP_AWB_MODE_YCBCR +}; + +enum rkisp1_cif_isp_flt_mode { + RKISP1_CIF_ISP_FLT_STATIC_MODE, + RKISP1_CIF_ISP_FLT_DYNAMIC_MODE +}; + +/** + * enum rkisp1_cif_isp_exp_ctrl_autostop - stop modes + * @RKISP1_CIF_ISP_EXP_CTRL_AUTOSTOP_0: continuous measurement + * @RKISP1_CIF_ISP_EXP_CTRL_AUTOSTOP_1: stop measuring after a complete frame + */ +enum rkisp1_cif_isp_exp_ctrl_autostop { + RKISP1_CIF_ISP_EXP_CTRL_AUTOSTOP_0 = 0, + RKISP1_CIF_ISP_EXP_CTRL_AUTOSTOP_1 = 1, +}; + +/** + * enum rkisp1_cif_isp_exp_meas_mode - Exposure measure mode + * @RKISP1_CIF_ISP_EXP_MEASURING_MODE_0: Y = 16 + 0.25R + 0.5G + 0.1094B + * @RKISP1_CIF_ISP_EXP_MEASURING_MODE_1: Y = (R + G + B) x (85/256) + */ +enum rkisp1_cif_isp_exp_meas_mode { + RKISP1_CIF_ISP_EXP_MEASURING_MODE_0, + RKISP1_CIF_ISP_EXP_MEASURING_MODE_1, +}; + +/*---------- PART1: Input Parameters ------------*/ + +/** + * struct rkisp1_cif_isp_window - measurement window. + * + * Measurements are calculated per window inside the frame. + * This struct represents a window for a measurement. + * + * @h_offs: the horizontal offset of the window from the left of the frame in pixels. + * @v_offs: the vertical offset of the window from the top of the frame in pixels. + * @h_size: the horizontal size of the window in pixels + * @v_size: the vertical size of the window in pixels. + */ +struct rkisp1_cif_isp_window { + __u16 h_offs; + __u16 v_offs; + __u16 h_size; + __u16 v_size; +}; + +/** + * struct rkisp1_cif_isp_bls_fixed_val - BLS fixed subtraction values + * + * The values will be subtracted from the sensor + * values. Therefore a negative value means addition instead of subtraction! + * + * @r: Fixed (signed!) subtraction value for Bayer pattern R + * @gr: Fixed (signed!) subtraction value for Bayer pattern Gr + * @gb: Fixed (signed!) subtraction value for Bayer pattern Gb + * @b: Fixed (signed!) subtraction value for Bayer pattern B + */ +struct rkisp1_cif_isp_bls_fixed_val { + __s16 r; + __s16 gr; + __s16 gb; + __s16 b; +}; + +/** + * struct rkisp1_cif_isp_bls_config - Configuration used by black level subtraction + * + * @enable_auto: Automatic mode activated means that the measured values + * are subtracted. Otherwise the fixed subtraction + * values will be subtracted. + * @en_windows: enabled window + * @bls_window1: Measurement window 1 size + * @bls_window2: Measurement window 2 size + * @bls_samples: Set amount of measured pixels for each Bayer position + * (A, B,C and D) to 2^bls_samples. + * @fixed_val: Fixed subtraction values + */ +struct rkisp1_cif_isp_bls_config { + __u8 enable_auto; + __u8 en_windows; + struct rkisp1_cif_isp_window bls_window1; + struct rkisp1_cif_isp_window bls_window2; + __u8 bls_samples; + struct rkisp1_cif_isp_bls_fixed_val fixed_val; +}; + +/** + * struct rkisp1_cif_isp_dpcc_methods_config - DPCC methods set configuration + * + * This structure stores the configuration of one set of methods for the DPCC + * algorithm. Multiple methods can be selected in each set (independently for + * the Green and Red/Blue components) through the @method field, the result is + * the logical AND of all enabled methods. The remaining fields set thresholds + * and factors for each method. + * + * @method: Method enable bits (RKISP1_CIF_ISP_DPCC_METHODS_SET_*) + * @line_thresh: Line threshold (RKISP1_CIF_ISP_DPCC_LINE_THRESH_*) + * @line_mad_fac: Line Mean Absolute Difference factor (RKISP1_CIF_ISP_DPCC_LINE_MAD_FAC_*) + * @pg_fac: Peak gradient factor (RKISP1_CIF_ISP_DPCC_PG_FAC_*) + * @rnd_thresh: Rank Neighbor Difference threshold (RKISP1_CIF_ISP_DPCC_RND_THRESH_*) + * @rg_fac: Rank gradient factor (RKISP1_CIF_ISP_DPCC_RG_FAC_*) + */ +struct rkisp1_cif_isp_dpcc_methods_config { + __u32 method; + __u32 line_thresh; + __u32 line_mad_fac; + __u32 pg_fac; + __u32 rnd_thresh; + __u32 rg_fac; +}; + +/** + * struct rkisp1_cif_isp_dpcc_config - Configuration used by DPCC + * + * Configuration used by Defect Pixel Cluster Correction. Three sets of methods + * can be configured and selected through the @set_use field. The result is the + * logical OR of all enabled sets. + * + * @mode: DPCC mode (RKISP1_CIF_ISP_DPCC_MODE_*) + * @output_mode: Interpolation output mode (RKISP1_CIF_ISP_DPCC_OUTPUT_MODE_*) + * @set_use: Methods sets selection (RKISP1_CIF_ISP_DPCC_SET_USE_*) + * @methods: Methods sets configuration + * @ro_limits: Rank order limits (RKISP1_CIF_ISP_DPCC_RO_LIMITS_*) + * @rnd_offs: Differential rank offsets for rank neighbor difference (RKISP1_CIF_ISP_DPCC_RND_OFFS_*) + */ +struct rkisp1_cif_isp_dpcc_config { + __u32 mode; + __u32 output_mode; + __u32 set_use; + struct rkisp1_cif_isp_dpcc_methods_config methods[RKISP1_CIF_ISP_DPCC_METHODS_MAX]; + __u32 ro_limits; + __u32 rnd_offs; +}; + +/** + * struct rkisp1_cif_isp_gamma_corr_curve - gamma curve point definition y-axis (output). + * + * The reset values define a linear curve which has the same effect as bypass. Reset values are: + * gamma_y[0] = 0x0000, gamma_y[1] = 0x0100, ... gamma_y[15] = 0x0f00, gamma_y[16] = 0xfff + * + * @gamma_y: the values for the y-axis of gamma curve points. Each value is 12 bit. + */ +struct rkisp1_cif_isp_gamma_corr_curve { + __u16 gamma_y[RKISP1_CIF_ISP_DEGAMMA_CURVE_SIZE]; +}; + +/** + * struct rkisp1_cif_isp_gamma_curve_x_axis_pnts - De-Gamma Curve definition x increments + * (sampling points). gamma_dx0 is for the lower samples (1-8), gamma_dx1 is for the + * higher samples (9-16). The reset values for both fields is 0x44444444. This means + * that each sample is 4 units away from the previous one on the x-axis. + * + * @gamma_dx0: gamma curve sample points definitions. Bits 0:2 for sample 1. Bit 3 unused. + * Bits 4:6 for sample 2. bit 7 unused ... Bits 28:30 for sample 8. Bit 31 unused + * @gamma_dx1: gamma curve sample points definitions. Bits 0:2 for sample 9. Bit 3 unused. + * Bits 4:6 for sample 10. bit 7 unused ... Bits 28:30 for sample 16. Bit 31 unused + */ +struct rkisp1_cif_isp_gamma_curve_x_axis_pnts { + __u32 gamma_dx0; + __u32 gamma_dx1; +}; + +/** + * struct rkisp1_cif_isp_sdg_config - Configuration used by sensor degamma + * + * @curve_r: gamma curve point definition axis for red + * @curve_g: gamma curve point definition axis for green + * @curve_b: gamma curve point definition axis for blue + * @xa_pnts: x axis increments + */ +struct rkisp1_cif_isp_sdg_config { + struct rkisp1_cif_isp_gamma_corr_curve curve_r; + struct rkisp1_cif_isp_gamma_corr_curve curve_g; + struct rkisp1_cif_isp_gamma_corr_curve curve_b; + struct rkisp1_cif_isp_gamma_curve_x_axis_pnts xa_pnts; +}; + +/** + * struct rkisp1_cif_isp_lsc_config - Configuration used by Lens shading correction + * + * @r_data_tbl: sample table red + * @gr_data_tbl: sample table green (red) + * @gb_data_tbl: sample table green (blue) + * @b_data_tbl: sample table blue + * @x_grad_tbl: gradient table x + * @y_grad_tbl: gradient table y + * @x_size_tbl: size table x + * @y_size_tbl: size table y + * @config_width: not used at the moment + * @config_height: not used at the moment + */ +struct rkisp1_cif_isp_lsc_config { + __u16 r_data_tbl[RKISP1_CIF_ISP_LSC_SAMPLES_MAX][RKISP1_CIF_ISP_LSC_SAMPLES_MAX]; + __u16 gr_data_tbl[RKISP1_CIF_ISP_LSC_SAMPLES_MAX][RKISP1_CIF_ISP_LSC_SAMPLES_MAX]; + __u16 gb_data_tbl[RKISP1_CIF_ISP_LSC_SAMPLES_MAX][RKISP1_CIF_ISP_LSC_SAMPLES_MAX]; + __u16 b_data_tbl[RKISP1_CIF_ISP_LSC_SAMPLES_MAX][RKISP1_CIF_ISP_LSC_SAMPLES_MAX]; + + __u16 x_grad_tbl[RKISP1_CIF_ISP_LSC_SECTORS_TBL_SIZE]; + __u16 y_grad_tbl[RKISP1_CIF_ISP_LSC_SECTORS_TBL_SIZE]; + + __u16 x_size_tbl[RKISP1_CIF_ISP_LSC_SECTORS_TBL_SIZE]; + __u16 y_size_tbl[RKISP1_CIF_ISP_LSC_SECTORS_TBL_SIZE]; + __u16 config_width; + __u16 config_height; +}; + +/** + * struct rkisp1_cif_isp_ie_config - Configuration used by image effects + * + * @effect: values from 'enum v4l2_colorfx'. Possible values are: V4L2_COLORFX_SEPIA, + * V4L2_COLORFX_SET_CBCR, V4L2_COLORFX_AQUA, V4L2_COLORFX_EMBOSS, + * V4L2_COLORFX_SKETCH, V4L2_COLORFX_BW, V4L2_COLORFX_NEGATIVE + * @color_sel: bits 0:2 - colors bitmask (001 - blue, 010 - green, 100 - red). + * bits 8:15 - Threshold value of the RGB colors for the color selection effect. + * @eff_mat_1: 3x3 Matrix Coefficients for Emboss Effect 1 + * @eff_mat_2: 3x3 Matrix Coefficients for Emboss Effect 2 + * @eff_mat_3: 3x3 Matrix Coefficients for Emboss 3/Sketch 1 + * @eff_mat_4: 3x3 Matrix Coefficients for Sketch Effect 2 + * @eff_mat_5: 3x3 Matrix Coefficients for Sketch Effect 3 + * @eff_tint: Chrominance increment values of tint (used for sepia effect) + */ +struct rkisp1_cif_isp_ie_config { + __u16 effect; + __u16 color_sel; + __u16 eff_mat_1; + __u16 eff_mat_2; + __u16 eff_mat_3; + __u16 eff_mat_4; + __u16 eff_mat_5; + __u16 eff_tint; +}; + +/** + * struct rkisp1_cif_isp_cproc_config - Configuration used by Color Processing + * + * @c_out_range: Chrominance pixel clipping range at output. + * (0 for limit, 1 for full) + * @y_in_range: Luminance pixel clipping range at output. + * @y_out_range: Luminance pixel clipping range at output. + * @contrast: 00~ff, 0.0~1.992 + * @brightness: 80~7F, -128~+127 + * @sat: saturation, 00~FF, 0.0~1.992 + * @hue: 80~7F, -90~+87.188 + */ +struct rkisp1_cif_isp_cproc_config { + __u8 c_out_range; + __u8 y_in_range; + __u8 y_out_range; + __u8 contrast; + __u8 brightness; + __u8 sat; + __u8 hue; +}; + +/** + * struct rkisp1_cif_isp_awb_meas_config - Configuration for the AWB statistics + * + * @awb_mode: the awb meas mode. From enum rkisp1_cif_isp_awb_mode_type. + * @awb_wnd: white balance measurement window (in pixels) + * @max_y: only pixels values < max_y contribute to awb measurement, set to 0 + * to disable this feature + * @min_y: only pixels values > min_y contribute to awb measurement + * @max_csum: Chrominance sum maximum value, only consider pixels with Cb+Cr, + * smaller than threshold for awb measurements + * @min_c: Chrominance minimum value, only consider pixels with Cb/Cr + * each greater than threshold value for awb measurements + * @frames: number of frames - 1 used for mean value calculation + * (ucFrames=0 means 1 Frame) + * @awb_ref_cr: reference Cr value for AWB regulation, target for AWB + * @awb_ref_cb: reference Cb value for AWB regulation, target for AWB + * @enable_ymax_cmp: enable Y_MAX compare (Not valid in RGB measurement mode.) + */ +struct rkisp1_cif_isp_awb_meas_config { + /* + * Note: currently the h and v offsets are mapped to grid offsets + */ + struct rkisp1_cif_isp_window awb_wnd; + __u32 awb_mode; + __u8 max_y; + __u8 min_y; + __u8 max_csum; + __u8 min_c; + __u8 frames; + __u8 awb_ref_cr; + __u8 awb_ref_cb; + __u8 enable_ymax_cmp; +}; + +/** + * struct rkisp1_cif_isp_awb_gain_config - Configuration used by auto white balance gain + * + * All fields in this struct are 10 bit, where: + * 0x100h = 1, unsigned integer value, range 0 to 4 with 8 bit fractional part. + * + * out_data_x = ( AWB_GAIN_X * in_data + 128) >> 8 + * + * @gain_red: gain value for red component. + * @gain_green_r: gain value for green component in red line. + * @gain_blue: gain value for blue component. + * @gain_green_b: gain value for green component in blue line. + */ +struct rkisp1_cif_isp_awb_gain_config { + __u16 gain_red; + __u16 gain_green_r; + __u16 gain_blue; + __u16 gain_green_b; +}; + +/** + * struct rkisp1_cif_isp_flt_config - Configuration used by ISP filtering + * + * All 4 threshold fields (thresh_*) are 10 bits. + * All 6 factor fields (fac_*) are 6 bits. + * + * @mode: ISP_FILT_MODE register fields (from enum rkisp1_cif_isp_flt_mode) + * @grn_stage1: Green filter stage 1 select (range 0x0...0x8) + * @chr_h_mode: Chroma filter horizontal mode + * @chr_v_mode: Chroma filter vertical mode + * @thresh_bl0: If thresh_bl1 < sum_grad < thresh_bl0 then fac_bl0 is selected (blurring th) + * @thresh_bl1: If sum_grad < thresh_bl1 then fac_bl1 is selected (blurring th) + * @thresh_sh0: If thresh_sh0 < sum_grad < thresh_sh1 then thresh_sh0 is selected (sharpening th) + * @thresh_sh1: If thresh_sh1 < sum_grad then thresh_sh1 is selected (sharpening th) + * @lum_weight: Parameters for luminance weight function. + * @fac_sh1: filter factor for sharp1 level + * @fac_sh0: filter factor for sharp0 level + * @fac_mid: filter factor for mid level and for static filter mode + * @fac_bl0: filter factor for blur 0 level + * @fac_bl1: filter factor for blur 1 level (max blur) + */ +struct rkisp1_cif_isp_flt_config { + __u32 mode; + __u8 grn_stage1; + __u8 chr_h_mode; + __u8 chr_v_mode; + __u32 thresh_bl0; + __u32 thresh_bl1; + __u32 thresh_sh0; + __u32 thresh_sh1; + __u32 lum_weight; + __u32 fac_sh1; + __u32 fac_sh0; + __u32 fac_mid; + __u32 fac_bl0; + __u32 fac_bl1; +}; + +/** + * struct rkisp1_cif_isp_bdm_config - Configuration used by Bayer DeMosaic + * + * @demosaic_th: threshold for bayer demosaicing texture detection + */ +struct rkisp1_cif_isp_bdm_config { + __u8 demosaic_th; +}; + +/** + * struct rkisp1_cif_isp_ctk_config - Configuration used by Cross Talk correction + * + * @coeff: color correction matrix. Values are 11-bit signed fixed-point numbers with 4 bit integer + * and 7 bit fractional part, ranging from -8 (0x400) to +7.992 (0x3FF). 0 is + * represented by 0x000 and a coefficient value of 1 as 0x080. + * @ct_offset: Red, Green, Blue offsets for the crosstalk correction matrix + */ +struct rkisp1_cif_isp_ctk_config { + __u16 coeff[3][3]; + __u16 ct_offset[3]; +}; + +enum rkisp1_cif_isp_goc_mode { + RKISP1_CIF_ISP_GOC_MODE_LOGARITHMIC, + RKISP1_CIF_ISP_GOC_MODE_EQUIDISTANT +}; + +/** + * struct rkisp1_cif_isp_goc_config - Configuration used by Gamma Out correction + * + * @mode: goc mode (from enum rkisp1_cif_isp_goc_mode) + * @gamma_y: gamma out curve y-axis for all color components + * + * The number of entries of @gamma_y depends on the hardware revision + * as is reported by the hw_revision field of the struct media_device_info + * that is returned by ioctl MEDIA_IOC_DEVICE_INFO. + * + * Versions <= V11 have RKISP1_CIF_ISP_GAMMA_OUT_MAX_SAMPLES_V10 + * entries, versions >= V12 have RKISP1_CIF_ISP_GAMMA_OUT_MAX_SAMPLES_V12 + * entries. RKISP1_CIF_ISP_GAMMA_OUT_MAX_SAMPLES is equal to the maximum + * of the two. + */ +struct rkisp1_cif_isp_goc_config { + __u32 mode; + __u16 gamma_y[RKISP1_CIF_ISP_GAMMA_OUT_MAX_SAMPLES]; +}; + +/** + * struct rkisp1_cif_isp_hst_config - Configuration for Histogram statistics + * + * @mode: histogram mode (from enum rkisp1_cif_isp_histogram_mode) + * @histogram_predivider: process every stepsize pixel, all other pixels are + * skipped + * @meas_window: coordinates of the measure window + * @hist_weight: weighting factor for sub-windows + * + * The number of entries of @hist_weight depends on the hardware revision + * as is reported by the hw_revision field of the struct media_device_info + * that is returned by ioctl MEDIA_IOC_DEVICE_INFO. + * + * Versions <= V11 have RKISP1_CIF_ISP_HISTOGRAM_WEIGHT_GRIDS_SIZE_V10 + * entries, versions >= V12 have RKISP1_CIF_ISP_HISTOGRAM_WEIGHT_GRIDS_SIZE_V12 + * entries. RKISP1_CIF_ISP_HISTOGRAM_WEIGHT_GRIDS_SIZE is equal to the maximum + * of the two. + */ +struct rkisp1_cif_isp_hst_config { + __u32 mode; + __u8 histogram_predivider; + struct rkisp1_cif_isp_window meas_window; + __u8 hist_weight[RKISP1_CIF_ISP_HISTOGRAM_WEIGHT_GRIDS_SIZE]; +}; + +/** + * struct rkisp1_cif_isp_aec_config - Configuration for Auto Exposure statistics + * + * @mode: Exposure measure mode (from enum rkisp1_cif_isp_exp_meas_mode) + * @autostop: stop mode (from enum rkisp1_cif_isp_exp_ctrl_autostop) + * @meas_window: coordinates of the measure window + */ +struct rkisp1_cif_isp_aec_config { + __u32 mode; + __u32 autostop; + struct rkisp1_cif_isp_window meas_window; +}; + +/** + * struct rkisp1_cif_isp_afc_config - Configuration for the Auto Focus statistics + * + * @num_afm_win: max RKISP1_CIF_ISP_AFM_MAX_WINDOWS + * @afm_win: coordinates of the meas window + * @thres: threshold used for minimizing the influence of noise + * @var_shift: the number of bits for the shift operation at the end of the + * calculation chain. + */ +struct rkisp1_cif_isp_afc_config { + __u8 num_afm_win; + struct rkisp1_cif_isp_window afm_win[RKISP1_CIF_ISP_AFM_MAX_WINDOWS]; + __u32 thres; + __u32 var_shift; +}; + +/** + * enum rkisp1_cif_isp_dpf_gain_usage - dpf gain usage + * @RKISP1_CIF_ISP_DPF_GAIN_USAGE_DISABLED: don't use any gains in preprocessing stage + * @RKISP1_CIF_ISP_DPF_GAIN_USAGE_NF_GAINS: use only the noise function gains from + * registers DPF_NF_GAIN_R, ... + * @RKISP1_CIF_ISP_DPF_GAIN_USAGE_LSC_GAINS: use only the gains from LSC module + * @RKISP1_CIF_ISP_DPF_GAIN_USAGE_NF_LSC_GAINS: use the noise function gains and the + * gains from LSC module + * @RKISP1_CIF_ISP_DPF_GAIN_USAGE_AWB_GAINS: use only the gains from AWB module + * @RKISP1_CIF_ISP_DPF_GAIN_USAGE_AWB_LSC_GAINS: use the gains from AWB and LSC module + * @RKISP1_CIF_ISP_DPF_GAIN_USAGE_MAX: upper border (only for an internal evaluation) + */ +enum rkisp1_cif_isp_dpf_gain_usage { + RKISP1_CIF_ISP_DPF_GAIN_USAGE_DISABLED, + RKISP1_CIF_ISP_DPF_GAIN_USAGE_NF_GAINS, + RKISP1_CIF_ISP_DPF_GAIN_USAGE_LSC_GAINS, + RKISP1_CIF_ISP_DPF_GAIN_USAGE_NF_LSC_GAINS, + RKISP1_CIF_ISP_DPF_GAIN_USAGE_AWB_GAINS, + RKISP1_CIF_ISP_DPF_GAIN_USAGE_AWB_LSC_GAINS, + RKISP1_CIF_ISP_DPF_GAIN_USAGE_MAX +}; + +/** + * enum rkisp1_cif_isp_dpf_rb_filtersize - Red and blue filter sizes + * @RKISP1_CIF_ISP_DPF_RB_FILTERSIZE_13x9: red and blue filter kernel size 13x9 + * (means 7x5 active pixel) + * @RKISP1_CIF_ISP_DPF_RB_FILTERSIZE_9x9: red and blue filter kernel size 9x9 + * (means 5x5 active pixel) + */ +enum rkisp1_cif_isp_dpf_rb_filtersize { + RKISP1_CIF_ISP_DPF_RB_FILTERSIZE_13x9, + RKISP1_CIF_ISP_DPF_RB_FILTERSIZE_9x9, +}; + +/** + * enum rkisp1_cif_isp_dpf_nll_scale_mode - dpf noise level scale mode + * @RKISP1_CIF_ISP_NLL_SCALE_LINEAR: use a linear scaling + * @RKISP1_CIF_ISP_NLL_SCALE_LOGARITHMIC: use a logarithmic scaling + */ +enum rkisp1_cif_isp_dpf_nll_scale_mode { + RKISP1_CIF_ISP_NLL_SCALE_LINEAR, + RKISP1_CIF_ISP_NLL_SCALE_LOGARITHMIC, +}; + +/** + * struct rkisp1_cif_isp_dpf_nll - Noise level lookup + * + * @coeff: Noise level Lookup coefficient + * @scale_mode: dpf noise level scale mode (from enum rkisp1_cif_isp_dpf_nll_scale_mode) + */ +struct rkisp1_cif_isp_dpf_nll { + __u16 coeff[RKISP1_CIF_ISP_DPF_MAX_NLF_COEFFS]; + __u32 scale_mode; +}; + +/** + * struct rkisp1_cif_isp_dpf_rb_flt - Red blue filter config + * + * @fltsize: The filter size for the red and blue pixels + * (from enum rkisp1_cif_isp_dpf_rb_filtersize) + * @spatial_coeff: Spatial weights + * @r_enable: enable filter processing for red pixels + * @b_enable: enable filter processing for blue pixels + */ +struct rkisp1_cif_isp_dpf_rb_flt { + __u32 fltsize; + __u8 spatial_coeff[RKISP1_CIF_ISP_DPF_MAX_SPATIAL_COEFFS]; + __u8 r_enable; + __u8 b_enable; +}; + +/** + * struct rkisp1_cif_isp_dpf_g_flt - Green filter Configuration + * + * @spatial_coeff: Spatial weights + * @gr_enable: enable filter processing for green pixels in green/red lines + * @gb_enable: enable filter processing for green pixels in green/blue lines + */ +struct rkisp1_cif_isp_dpf_g_flt { + __u8 spatial_coeff[RKISP1_CIF_ISP_DPF_MAX_SPATIAL_COEFFS]; + __u8 gr_enable; + __u8 gb_enable; +}; + +/** + * struct rkisp1_cif_isp_dpf_gain - Noise function Configuration + * + * @mode: dpf gain usage (from enum rkisp1_cif_isp_dpf_gain_usage) + * @nf_r_gain: Noise function Gain that replaces the AWB gain for red pixels + * @nf_b_gain: Noise function Gain that replaces the AWB gain for blue pixels + * @nf_gr_gain: Noise function Gain that replaces the AWB gain + * for green pixels in a red line + * @nf_gb_gain: Noise function Gain that replaces the AWB gain + * for green pixels in a blue line + */ +struct rkisp1_cif_isp_dpf_gain { + __u32 mode; + __u16 nf_r_gain; + __u16 nf_b_gain; + __u16 nf_gr_gain; + __u16 nf_gb_gain; +}; + +/** + * struct rkisp1_cif_isp_dpf_config - Configuration used by De-noising pre-filter + * + * @gain: noise function gain + * @g_flt: green filter config + * @rb_flt: red blue filter config + * @nll: noise level lookup + */ +struct rkisp1_cif_isp_dpf_config { + struct rkisp1_cif_isp_dpf_gain gain; + struct rkisp1_cif_isp_dpf_g_flt g_flt; + struct rkisp1_cif_isp_dpf_rb_flt rb_flt; + struct rkisp1_cif_isp_dpf_nll nll; +}; + +/** + * struct rkisp1_cif_isp_dpf_strength_config - strength of the filter + * + * @r: filter strength of the RED filter + * @g: filter strength of the GREEN filter + * @b: filter strength of the BLUE filter + */ +struct rkisp1_cif_isp_dpf_strength_config { + __u8 r; + __u8 g; + __u8 b; +}; + +/** + * struct rkisp1_cif_isp_isp_other_cfg - Parameters for some blocks in rockchip isp1 + * + * @dpcc_config: Defect Pixel Cluster Correction config + * @bls_config: Black Level Subtraction config + * @sdg_config: sensor degamma config + * @lsc_config: Lens Shade config + * @awb_gain_config: Auto White balance gain config + * @flt_config: filter config + * @bdm_config: demosaic config + * @ctk_config: cross talk config + * @goc_config: gamma out config + * @bls_config: black level subtraction config + * @dpf_config: De-noising pre-filter config + * @dpf_strength_config: dpf strength config + * @cproc_config: color process config + * @ie_config: image effects config + */ +struct rkisp1_cif_isp_isp_other_cfg { + struct rkisp1_cif_isp_dpcc_config dpcc_config; + struct rkisp1_cif_isp_bls_config bls_config; + struct rkisp1_cif_isp_sdg_config sdg_config; + struct rkisp1_cif_isp_lsc_config lsc_config; + struct rkisp1_cif_isp_awb_gain_config awb_gain_config; + struct rkisp1_cif_isp_flt_config flt_config; + struct rkisp1_cif_isp_bdm_config bdm_config; + struct rkisp1_cif_isp_ctk_config ctk_config; + struct rkisp1_cif_isp_goc_config goc_config; + struct rkisp1_cif_isp_dpf_config dpf_config; + struct rkisp1_cif_isp_dpf_strength_config dpf_strength_config; + struct rkisp1_cif_isp_cproc_config cproc_config; + struct rkisp1_cif_isp_ie_config ie_config; +}; + +/** + * struct rkisp1_cif_isp_isp_meas_cfg - Rockchip ISP1 Measure Parameters + * + * @awb_meas_config: auto white balance config + * @hst_config: histogram config + * @aec_config: auto exposure config + * @afc_config: auto focus config + */ +struct rkisp1_cif_isp_isp_meas_cfg { + struct rkisp1_cif_isp_awb_meas_config awb_meas_config; + struct rkisp1_cif_isp_hst_config hst_config; + struct rkisp1_cif_isp_aec_config aec_config; + struct rkisp1_cif_isp_afc_config afc_config; +}; + +/** + * struct rkisp1_params_cfg - Rockchip ISP1 Input Parameters Meta Data + * + * @module_en_update: mask the enable bits of which module should be updated + * @module_ens: mask the enable value of each module, only update the module + * which correspond bit was set in module_en_update + * @module_cfg_update: mask the config bits of which module should be updated + * @meas: measurement config + * @others: other config + */ +struct rkisp1_params_cfg { + __u32 module_en_update; + __u32 module_ens; + __u32 module_cfg_update; + + struct rkisp1_cif_isp_isp_meas_cfg meas; + struct rkisp1_cif_isp_isp_other_cfg others; +}; + +/*---------- PART2: Measurement Statistics ------------*/ + +/** + * struct rkisp1_cif_isp_awb_meas - AWB measured values + * + * @cnt: White pixel count, number of "white pixels" found during last + * measurement + * @mean_y_or_g: Mean value of Y within window and frames, + * Green if RGB is selected. + * @mean_cb_or_b: Mean value of Cb within window and frames, + * Blue if RGB is selected. + * @mean_cr_or_r: Mean value of Cr within window and frames, + * Red if RGB is selected. + */ +struct rkisp1_cif_isp_awb_meas { + __u32 cnt; + __u8 mean_y_or_g; + __u8 mean_cb_or_b; + __u8 mean_cr_or_r; +}; + +/** + * struct rkisp1_cif_isp_awb_stat - statistics automatic white balance data + * + * @awb_mean: Mean measured data + */ +struct rkisp1_cif_isp_awb_stat { + struct rkisp1_cif_isp_awb_meas awb_mean[RKISP1_CIF_ISP_AWB_MAX_GRID]; +}; + +/** + * struct rkisp1_cif_isp_bls_meas_val - BLS measured values + * + * @meas_r: Mean measured value for Bayer pattern R + * @meas_gr: Mean measured value for Bayer pattern Gr + * @meas_gb: Mean measured value for Bayer pattern Gb + * @meas_b: Mean measured value for Bayer pattern B + */ +struct rkisp1_cif_isp_bls_meas_val { + __u16 meas_r; + __u16 meas_gr; + __u16 meas_gb; + __u16 meas_b; +}; + +/** + * struct rkisp1_cif_isp_ae_stat - statistics auto exposure data + * + * @exp_mean: Mean luminance value of block xx + * @bls_val: BLS measured values + * + * The number of entries of @exp_mean depends on the hardware revision + * as is reported by the hw_revision field of the struct media_device_info + * that is returned by ioctl MEDIA_IOC_DEVICE_INFO. + * + * Versions <= V11 have RKISP1_CIF_ISP_AE_MEAN_MAX_V10 entries, + * versions >= V12 have RKISP1_CIF_ISP_AE_MEAN_MAX_V12 entries. + * RKISP1_CIF_ISP_AE_MEAN_MAX is equal to the maximum of the two. + * + * Image is divided into 5x5 blocks on V10 and 9x9 blocks on V12. + */ +struct rkisp1_cif_isp_ae_stat { + __u8 exp_mean[RKISP1_CIF_ISP_AE_MEAN_MAX]; + struct rkisp1_cif_isp_bls_meas_val bls_val; +}; + +/** + * struct rkisp1_cif_isp_af_meas_val - AF measured values + * + * @sum: sharpness value + * @lum: luminance value + */ +struct rkisp1_cif_isp_af_meas_val { + __u32 sum; + __u32 lum; +}; + +/** + * struct rkisp1_cif_isp_af_stat - statistics auto focus data + * + * @window: AF measured value of window x + * + * The module measures the sharpness in 3 windows of selectable size via + * register settings(ISP_AFM_*_A/B/C) + */ +struct rkisp1_cif_isp_af_stat { + struct rkisp1_cif_isp_af_meas_val window[RKISP1_CIF_ISP_AFM_MAX_WINDOWS]; +}; + +/** + * struct rkisp1_cif_isp_hist_stat - statistics histogram data + * + * @hist_bins: measured bin counters. Each bin is a 20 bits unsigned fixed point + * type. Bits 0-4 are the fractional part and bits 5-19 are the + * integer part. + * + * The window of the measurements area is divided to 5x5 sub-windows for + * V10/V11 and to 9x9 sub-windows for V12. The histogram is then computed for + * each sub-window independently and the final result is a weighted average of + * the histogram measurements on all sub-windows. The window of the + * measurements area and the weight of each sub-window are configurable using + * struct @rkisp1_cif_isp_hst_config. + * + * The histogram contains 16 bins in V10/V11 and 32 bins in V12/V13. + * + * The number of entries of @hist_bins depends on the hardware revision + * as is reported by the hw_revision field of the struct media_device_info + * that is returned by ioctl MEDIA_IOC_DEVICE_INFO. + * + * Versions <= V11 have RKISP1_CIF_ISP_HIST_BIN_N_MAX_V10 entries, + * versions >= V12 have RKISP1_CIF_ISP_HIST_BIN_N_MAX_V12 entries. + * RKISP1_CIF_ISP_HIST_BIN_N_MAX is equal to the maximum of the two. + */ +struct rkisp1_cif_isp_hist_stat { + __u32 hist_bins[RKISP1_CIF_ISP_HIST_BIN_N_MAX]; +}; + +/** + * struct rkisp1_cif_isp_stat - Rockchip ISP1 Statistics Data + * + * @awb: statistics data for automatic white balance + * @ae: statistics data for auto exposure + * @af: statistics data for auto focus + * @hist: statistics histogram data + */ +struct rkisp1_cif_isp_stat { + struct rkisp1_cif_isp_awb_stat awb; + struct rkisp1_cif_isp_ae_stat ae; + struct rkisp1_cif_isp_af_stat af; + struct rkisp1_cif_isp_hist_stat hist; +}; + +/** + * struct rkisp1_stat_buffer - Rockchip ISP1 Statistics Meta Data + * + * @meas_type: measurement types (RKISP1_CIF_ISP_STAT_* definitions) + * @frame_id: frame ID for sync + * @params: statistics data + */ +struct rkisp1_stat_buffer { + __u32 meas_type; + __u32 frame_id; + struct rkisp1_cif_isp_stat params; +}; + +#endif /* _RKISP1_CONFIG_H */ diff --git a/linux-headers/include/linux/romfs_fs.h b/linux-headers/include/linux/romfs_fs.h index a7f1585acce..6aa05e79245 100644 --- a/linux-headers/include/linux/romfs_fs.h +++ b/linux-headers/include/linux/romfs_fs.h @@ -27,7 +27,7 @@ struct romfs_super_block { __be32 word1; __be32 size; __be32 checksum; - char name[0]; /* volume name */ + char name[]; /* volume name */ }; /* On disk inode */ @@ -37,7 +37,7 @@ struct romfs_inode { __be32 spec; __be32 size; __be32 checksum; - char name[0]; + char name[]; }; #define ROMFH_TYPE 7 diff --git a/linux-headers/include/linux/rpl.h b/linux-headers/include/linux/rpl.h index c24b64cd597..42580b39b3c 100644 --- a/linux-headers/include/linux/rpl.h +++ b/linux-headers/include/linux/rpl.h @@ -28,17 +28,17 @@ struct ipv6_rpl_sr_hdr { pad:4, reserved1:16; #elif defined(__BIG_ENDIAN_BITFIELD) - __u32 reserved:20, + __u32 cmpri:4, + cmpre:4, pad:4, - cmpri:4, - cmpre:4; + reserved:20; #else #error "Please fix " #endif union { - struct in6_addr addr[0]; - __u8 data[0]; + __DECLARE_FLEX_ARRAY(struct in6_addr, addr); + __DECLARE_FLEX_ARRAY(__u8, data); } segments; } __attribute__((packed)); diff --git a/linux-headers/include/linux/rpmsg.h b/linux-headers/include/linux/rpmsg.h index db0f021216f..b0dd3d21966 100644 --- a/linux-headers/include/linux/rpmsg.h +++ b/linux-headers/include/linux/rpmsg.h @@ -9,11 +9,13 @@ #include #include +#define RPMSG_ADDR_ANY 0xFFFFFFFF + /** * struct rpmsg_endpoint_info - endpoint info representation * @name: name of service - * @src: local address - * @dst: destination address + * @src: local address. To set to RPMSG_ADDR_ANY if not used. + * @dst: destination address. To set to RPMSG_ADDR_ANY if not used. */ struct rpmsg_endpoint_info { char name[32]; @@ -21,7 +23,34 @@ struct rpmsg_endpoint_info { __u32 dst; }; +/** + * Instantiate a new rmpsg char device endpoint. + */ #define RPMSG_CREATE_EPT_IOCTL _IOW(0xb5, 0x1, struct rpmsg_endpoint_info) + +/** + * Destroy a rpmsg char device endpoint created by the RPMSG_CREATE_EPT_IOCTL. + */ #define RPMSG_DESTROY_EPT_IOCTL _IO(0xb5, 0x2) +/** + * Instantiate a new local rpmsg service device. + */ +#define RPMSG_CREATE_DEV_IOCTL _IOW(0xb5, 0x3, struct rpmsg_endpoint_info) + +/** + * Release a local rpmsg device. + */ +#define RPMSG_RELEASE_DEV_IOCTL _IOW(0xb5, 0x4, struct rpmsg_endpoint_info) + +/** + * Get the flow control state of the remote rpmsg char device. + */ +#define RPMSG_GET_OUTGOING_FLOWCONTROL _IOR(0xb5, 0x5, int) + +/** + * Set the flow control state of the local rpmsg char device. + */ +#define RPMSG_SET_INCOMING_FLOWCONTROL _IOR(0xb5, 0x6, int) + #endif diff --git a/linux-headers/include/linux/rpmsg_types.h b/linux-headers/include/linux/rpmsg_types.h new file mode 100644 index 00000000000..f4ce526f385 --- /dev/null +++ b/linux-headers/include/linux/rpmsg_types.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _LINUX_RPMSG_TYPES_H +#define _LINUX_RPMSG_TYPES_H + +#include + +typedef __u16 __bitwise __rpmsg16; +typedef __u32 __bitwise __rpmsg32; +typedef __u64 __bitwise __rpmsg64; + +#endif /* _LINUX_RPMSG_TYPES_H */ diff --git a/linux-headers/include/linux/rseq.h b/linux-headers/include/linux/rseq.h index 069068acf46..1f434e666de 100644 --- a/linux-headers/include/linux/rseq.h +++ b/linux-headers/include/linux/rseq.h @@ -105,23 +105,11 @@ struct rseq { * Read and set by the kernel. Set by user-space with single-copy * atomicity semantics. This field should only be updated by the * thread which registered this data structure. Aligned on 64-bit. + * + * 32-bit architectures should update the low order bits of the + * rseq_cs field, leaving the high order bits initialized to 0. */ - union { - __u64 ptr64; -#ifdef __LP64__ - __u64 ptr; -#else - struct { -#if (defined(__BYTE_ORDER) && (__BYTE_ORDER == __BIG_ENDIAN)) || defined(__BIG_ENDIAN) - __u32 padding; /* Initialized to zero. */ - __u32 ptr32; -#else /* LITTLE */ - __u32 ptr32; - __u32 padding; /* Initialized to zero. */ -#endif /* ENDIAN */ - } ptr; -#endif - } rseq_cs; + __u64 rseq_cs; /* * Restartable sequences flags field. @@ -142,6 +130,28 @@ struct rseq { * this thread. */ __u32 flags; + + /* + * Restartable sequences node_id field. Updated by the kernel. Read by + * user-space with single-copy atomicity semantics. This field should + * only be read by the thread which registered this data structure. + * Aligned on 32-bit. Contains the current NUMA node ID. + */ + __u32 node_id; + + /* + * Restartable sequences mm_cid field. Updated by the kernel. Read by + * user-space with single-copy atomicity semantics. This field should + * only be read by the thread which registered this data structure. + * Aligned on 32-bit. Contains the current thread's concurrency ID + * (allocated uniquely within a memory map). + */ + __u32 mm_cid; + + /* + * Flexible array member at end of structure, after last feature field. + */ + char end[]; } __attribute__((aligned(4 * sizeof(__u64)))); #endif /* _LINUX_RSEQ_H */ diff --git a/linux-headers/include/linux/rtc.h b/linux-headers/include/linux/rtc.h index c453b3a3fdd..d01cd602ae4 100644 --- a/linux-headers/include/linux/rtc.h +++ b/linux-headers/include/linux/rtc.h @@ -14,6 +14,7 @@ #include #include +#include /* * The struct used to pass data via the following ioctl. Similar to the @@ -66,6 +67,17 @@ struct rtc_pll_info { long pll_clock; /* base PLL frequency */ }; +struct rtc_param { + __u64 param; + union { + __u64 uvalue; + __s64 svalue; + __u64 ptr; + }; + __u32 index; + __u32 __pad; +}; + /* * ioctl calls that are permitted to the /dev/rtc interface, if * any of the RTC drivers are enabled. @@ -95,6 +107,9 @@ struct rtc_pll_info { #define RTC_PLL_GET _IOR('p', 0x11, struct rtc_pll_info) /* Get PLL correction */ #define RTC_PLL_SET _IOW('p', 0x12, struct rtc_pll_info) /* Set PLL correction */ +#define RTC_PARAM_GET _IOW('p', 0x13, struct rtc_param) /* Get parameter */ +#define RTC_PARAM_SET _IOW('p', 0x14, struct rtc_param) /* Set parameter */ + #define RTC_VL_DATA_INVALID _BITUL(0) /* Voltage too low, RTC data is invalid */ #define RTC_VL_BACKUP_LOW _BITUL(1) /* Backup voltage is low */ #define RTC_VL_BACKUP_EMPTY _BITUL(2) /* Backup empty or not present */ @@ -110,6 +125,26 @@ struct rtc_pll_info { #define RTC_AF 0x20 /* Alarm interrupt */ #define RTC_UF 0x10 /* Update interrupt for 1Hz RTC */ +/* feature list */ +#define RTC_FEATURE_ALARM 0 +#define RTC_FEATURE_ALARM_RES_MINUTE 1 +#define RTC_FEATURE_NEED_WEEK_DAY 2 +#define RTC_FEATURE_ALARM_RES_2S 3 +#define RTC_FEATURE_UPDATE_INTERRUPT 4 +#define RTC_FEATURE_CORRECTION 5 +#define RTC_FEATURE_BACKUP_SWITCH_MODE 6 +#define RTC_FEATURE_ALARM_WAKEUP_ONLY 7 +#define RTC_FEATURE_CNT 8 + +/* parameter list */ +#define RTC_PARAM_FEATURES 0 +#define RTC_PARAM_CORRECTION 1 +#define RTC_PARAM_BACKUP_SWITCH_MODE 2 + +#define RTC_BSM_DISABLED 0 +#define RTC_BSM_DIRECT 1 +#define RTC_BSM_LEVEL 2 +#define RTC_BSM_STANDBY 3 #define RTC_MAX_FREQ 8192 diff --git a/linux-headers/include/linux/rtnetlink.h b/linux-headers/include/linux/rtnetlink.h index 5ad84e663d0..2132e941b93 100644 --- a/linux-headers/include/linux/rtnetlink.h +++ b/linux-headers/include/linux/rtnetlink.h @@ -146,6 +146,8 @@ enum { #define RTM_NEWSTATS RTM_NEWSTATS RTM_GETSTATS = 94, #define RTM_GETSTATS RTM_GETSTATS + RTM_SETSTATS, +#define RTM_SETSTATS RTM_SETSTATS RTM_NEWCACHEREPORT = 96, #define RTM_NEWCACHEREPORT RTM_NEWCACHEREPORT @@ -178,6 +180,20 @@ enum { RTM_GETVLAN, #define RTM_GETVLAN RTM_GETVLAN + RTM_NEWNEXTHOPBUCKET = 116, +#define RTM_NEWNEXTHOPBUCKET RTM_NEWNEXTHOPBUCKET + RTM_DELNEXTHOPBUCKET, +#define RTM_DELNEXTHOPBUCKET RTM_DELNEXTHOPBUCKET + RTM_GETNEXTHOPBUCKET, +#define RTM_GETNEXTHOPBUCKET RTM_GETNEXTHOPBUCKET + + RTM_NEWTUNNEL = 120, +#define RTM_NEWTUNNEL RTM_NEWTUNNEL + RTM_DELTUNNEL, +#define RTM_DELTUNNEL RTM_DELTUNNEL + RTM_GETTUNNEL, +#define RTM_GETTUNNEL RTM_GETTUNNEL + __RTM_MAX, #define RTM_MAX (((__RTM_MAX + 3) & ~3) - 1) }; @@ -283,6 +299,7 @@ enum { #define RTPROT_MROUTED 17 /* Multicast daemon */ #define RTPROT_KEEPALIVED 18 /* Keepalived daemon */ #define RTPROT_BABEL 42 /* Babel daemon */ +#define RTPROT_OPENR 99 /* Open Routing (Open/R) Routes */ #define RTPROT_BGP 186 /* BGP Routes */ #define RTPROT_ISIS 187 /* ISIS Routes */ #define RTPROT_OSPF 188 /* OSPF Routes */ @@ -319,6 +336,11 @@ enum rt_scope_t { #define RTM_F_FIB_MATCH 0x2000 /* return full fib lookup match */ #define RTM_F_OFFLOAD 0x4000 /* route is offloaded */ #define RTM_F_TRAP 0x8000 /* route is trapping packets */ +#define RTM_F_OFFLOAD_FAILED 0x20000000 /* route offload failed, this value + * is chosen to avoid conflicts with + * other flags defined in + * include/uapi/linux/ipv6_route.h + */ /* Reserved table identifiers */ @@ -396,11 +418,13 @@ struct rtnexthop { #define RTNH_F_DEAD 1 /* Nexthop is dead (used by multipath) */ #define RTNH_F_PERVASIVE 2 /* Do recursive gateway lookup */ #define RTNH_F_ONLINK 4 /* Gateway is forced on link */ -#define RTNH_F_OFFLOAD 8 /* offloaded route */ +#define RTNH_F_OFFLOAD 8 /* Nexthop is offloaded */ #define RTNH_F_LINKDOWN 16 /* carrier-down on nexthop */ #define RTNH_F_UNRESOLVED 32 /* The entry is unresolved (ipmr) */ +#define RTNH_F_TRAP 64 /* Nexthop is trapping packets */ -#define RTNH_COMPARE_MASK (RTNH_F_DEAD | RTNH_F_LINKDOWN | RTNH_F_OFFLOAD) +#define RTNH_COMPARE_MASK (RTNH_F_DEAD | RTNH_F_LINKDOWN | \ + RTNH_F_OFFLOAD | RTNH_F_TRAP) /* Macros to handle hexthops */ @@ -416,7 +440,7 @@ struct rtnexthop { /* RTA_VIA */ struct rtvia { __kernel_sa_family_t rtvia_family; - __u8 rtvia_addr[0]; + __u8 rtvia_addr[]; }; /* RTM_CACHEINFO */ @@ -611,6 +635,7 @@ enum { TCA_INGRESS_BLOCK, TCA_EGRESS_BLOCK, TCA_DUMP_FLAGS, + TCA_EXT_WARN_MSG, __TCA_MAX }; @@ -737,6 +762,12 @@ enum rtnetlink_groups { #define RTNLGRP_NEXTHOP RTNLGRP_NEXTHOP RTNLGRP_BRVLAN, #define RTNLGRP_BRVLAN RTNLGRP_BRVLAN + RTNLGRP_MCTP_IFADDR, +#define RTNLGRP_MCTP_IFADDR RTNLGRP_MCTP_IFADDR + RTNLGRP_TUNNEL, +#define RTNLGRP_TUNNEL RTNLGRP_TUNNEL + RTNLGRP_STATS, +#define RTNLGRP_STATS RTNLGRP_STATS __RTNLGRP_MAX }; #define RTNLGRP_MAX (__RTNLGRP_MAX - 1) @@ -756,6 +787,7 @@ enum { TCA_ROOT_FLAGS, TCA_ROOT_COUNT, TCA_ROOT_TIME_DELTA, /* in msecs */ + TCA_ROOT_EXT_WARN_MSG, __TCA_ROOT_MAX, #define TCA_ROOT_MAX (__TCA_ROOT_MAX - 1) }; @@ -764,12 +796,18 @@ enum { #define TA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcamsg)) /* tcamsg flags stored in attribute TCA_ROOT_FLAGS * - * TCA_FLAG_LARGE_DUMP_ON user->kernel to request for larger than TCA_ACT_MAX_PRIO - * actions in a dump. All dump responses will contain the number of actions - * being dumped stored in for user app's consumption in TCA_ROOT_COUNT + * TCA_ACT_FLAG_LARGE_DUMP_ON user->kernel to request for larger than + * TCA_ACT_MAX_PRIO actions in a dump. All dump responses will contain the + * number of actions being dumped stored in for user app's consumption in + * TCA_ROOT_COUNT + * + * TCA_ACT_FLAG_TERSE_DUMP user->kernel to request terse (brief) dump that only + * includes essential action info (kind, index, etc.) * */ #define TCA_FLAG_LARGE_DUMP_ON (1 << 0) +#define TCA_ACT_FLAG_LARGE_DUMP_ON TCA_FLAG_LARGE_DUMP_ON +#define TCA_ACT_FLAG_TERSE_DUMP (1 << 1) /* New extended info filters for IFLA_EXT_MASK */ #define RTEXT_FILTER_VF (1 << 0) @@ -777,6 +815,9 @@ enum { #define RTEXT_FILTER_BRVLAN_COMPRESSED (1 << 2) #define RTEXT_FILTER_SKIP_STATS (1 << 3) #define RTEXT_FILTER_MRP (1 << 4) +#define RTEXT_FILTER_CFM_CONFIG (1 << 5) +#define RTEXT_FILTER_CFM_STATUS (1 << 6) +#define RTEXT_FILTER_MST (1 << 7) /* End of information exported to user level */ diff --git a/linux-headers/include/linux/sched/types.h b/linux-headers/include/linux/sched/types.h index 0848a67970e..8186aa1b76d 100644 --- a/linux-headers/include/linux/sched/types.h +++ b/linux-headers/include/linux/sched/types.h @@ -96,6 +96,8 @@ struct sched_param { * on a CPU with a capacity big enough to fit the specified value. * A task with a max utilization value smaller than 1024 is more likely * scheduled on a CPU with no more capacity than the specified value. + * + * A task utilization boundary can be reset by setting the attribute to -1. */ struct sched_attr { __u32 size; diff --git a/linux-headers/include/linux/sctp.h b/linux-headers/include/linux/sctp.h index 63f9cf715d0..d52e1229f8c 100644 --- a/linux-headers/include/linux/sctp.h +++ b/linux-headers/include/linux/sctp.h @@ -140,6 +140,8 @@ typedef __s32 sctp_assoc_t; #define SCTP_ECN_SUPPORTED 130 #define SCTP_EXPOSE_POTENTIALLY_FAILED_STATE 131 #define SCTP_EXPOSE_PF_STATE SCTP_EXPOSE_POTENTIALLY_FAILED_STATE +#define SCTP_REMOTE_UDP_ENCAPS_PORT 132 +#define SCTP_PLPMTUD_PROBE_INTERVAL 133 /* PR-SCTP policies */ #define SCTP_PR_SCTP_NONE 0x0000 @@ -363,7 +365,7 @@ struct sctp_assoc_change { __u16 sac_outbound_streams; __u16 sac_inbound_streams; sctp_assoc_t sac_assoc_id; - __u8 sac_info[0]; + __u8 sac_info[]; }; /* @@ -434,7 +436,7 @@ struct sctp_remote_error { __u32 sre_length; __be16 sre_error; sctp_assoc_t sre_assoc_id; - __u8 sre_data[0]; + __u8 sre_data[]; }; @@ -451,7 +453,7 @@ struct sctp_send_failed { __u32 ssf_error; struct sctp_sndrcvinfo ssf_info; sctp_assoc_t ssf_assoc_id; - __u8 ssf_data[0]; + __u8 ssf_data[]; }; struct sctp_send_failed_event { @@ -461,7 +463,7 @@ struct sctp_send_failed_event { __u32 ssf_error; struct sctp_sndinfo ssfe_info; sctp_assoc_t ssf_assoc_id; - __u8 ssf_data[0]; + __u8 ssf_data[]; }; /* @@ -1021,7 +1023,7 @@ struct sctp_getaddrs_old { struct sctp_getaddrs { sctp_assoc_t assoc_id; /*input*/ __u32 addr_num; /*output*/ - __u8 addrs[0]; /*output, variable size*/ + __u8 addrs[]; /*output, variable size*/ }; /* A socket user request obtained via SCTP_GET_ASSOC_STATS that retrieves @@ -1191,13 +1193,28 @@ struct sctp_event { uint8_t se_on; }; +struct sctp_udpencaps { + sctp_assoc_t sue_assoc_id; + struct sockaddr_storage sue_address; + uint16_t sue_port; +}; + /* SCTP Stream schedulers */ enum sctp_sched_type { SCTP_SS_FCFS, SCTP_SS_DEFAULT = SCTP_SS_FCFS, SCTP_SS_PRIO, SCTP_SS_RR, - SCTP_SS_MAX = SCTP_SS_RR + SCTP_SS_FC, + SCTP_SS_WFQ, + SCTP_SS_MAX = SCTP_SS_WFQ +}; + +/* Probe Interval socket option */ +struct sctp_probeinterval { + sctp_assoc_t spi_assoc_id; + struct sockaddr_storage spi_address; + __u32 spi_interval; }; #endif /* _SCTP_H */ diff --git a/linux-headers/include/linux/sdla.h b/linux-headers/include/linux/sdla.h deleted file mode 100644 index 3070e579a03..00000000000 --- a/linux-headers/include/linux/sdla.h +++ /dev/null @@ -1,117 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ -/* - * INET An implementation of the TCP/IP protocol suite for the LINUX - * operating system. INET is implemented using the BSD Socket - * interface as the means of communication with the user level. - * - * Global definitions for the Frame relay interface. - * - * Version: @(#)if_ifrad.h 0.20 13 Apr 96 - * - * Author: Mike McLagan - * - * Changes: - * 0.15 Mike McLagan Structure packing - * - * 0.20 Mike McLagan New flags for S508 buffer handling - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef SDLA_H -#define SDLA_H - -/* adapter type */ -#define SDLA_TYPES -#define SDLA_S502A 5020 -#define SDLA_S502E 5021 -#define SDLA_S503 5030 -#define SDLA_S507 5070 -#define SDLA_S508 5080 -#define SDLA_S509 5090 -#define SDLA_UNKNOWN -1 - -/* port selection flags for the S508 */ -#define SDLA_S508_PORT_V35 0x00 -#define SDLA_S508_PORT_RS232 0x02 - -/* Z80 CPU speeds */ -#define SDLA_CPU_3M 0x00 -#define SDLA_CPU_5M 0x01 -#define SDLA_CPU_7M 0x02 -#define SDLA_CPU_8M 0x03 -#define SDLA_CPU_10M 0x04 -#define SDLA_CPU_16M 0x05 -#define SDLA_CPU_12M 0x06 - -/* some private IOCTLs */ -#define SDLA_IDENTIFY (FRAD_LAST_IOCTL + 1) -#define SDLA_CPUSPEED (FRAD_LAST_IOCTL + 2) -#define SDLA_PROTOCOL (FRAD_LAST_IOCTL + 3) - -#define SDLA_CLEARMEM (FRAD_LAST_IOCTL + 4) -#define SDLA_WRITEMEM (FRAD_LAST_IOCTL + 5) -#define SDLA_READMEM (FRAD_LAST_IOCTL + 6) - -struct sdla_mem { - int addr; - int len; - void *data; -}; - -#define SDLA_START (FRAD_LAST_IOCTL + 7) -#define SDLA_STOP (FRAD_LAST_IOCTL + 8) - -/* some offsets in the Z80's memory space */ -#define SDLA_NMIADDR 0x0000 -#define SDLA_CONF_ADDR 0x0010 -#define SDLA_S502A_NMIADDR 0x0066 -#define SDLA_CODE_BASEADDR 0x0100 -#define SDLA_WINDOW_SIZE 0x2000 -#define SDLA_ADDR_MASK 0x1FFF - -/* largest handleable block of data */ -#define SDLA_MAX_DATA 4080 -#define SDLA_MAX_MTU 4072 /* MAX_DATA - sizeof(fradhdr) */ -#define SDLA_MAX_DLCI 24 - -/* this should be the same as frad_conf */ -struct sdla_conf { - short station; - short config; - short kbaud; - short clocking; - short max_frm; - short T391; - short T392; - short N391; - short N392; - short N393; - short CIR_fwd; - short Bc_fwd; - short Be_fwd; - short CIR_bwd; - short Bc_bwd; - short Be_bwd; -}; - -/* this should be the same as dlci_conf */ -struct sdla_dlci_conf { - short config; - short CIR_fwd; - short Bc_fwd; - short Be_fwd; - short CIR_bwd; - short Bc_bwd; - short Be_bwd; - short Tc_fwd; - short Tc_bwd; - short Tf_max; - short Tb_max; -}; - - -#endif /* SDLA_H */ diff --git a/linux-headers/include/linux/seccomp.h b/linux-headers/include/linux/seccomp.h index 675b73c6afb..cce909572d0 100644 --- a/linux-headers/include/linux/seccomp.h +++ b/linux-headers/include/linux/seccomp.h @@ -23,6 +23,8 @@ #define SECCOMP_FILTER_FLAG_SPEC_ALLOW (1UL << 2) #define SECCOMP_FILTER_FLAG_NEW_LISTENER (1UL << 3) #define SECCOMP_FILTER_FLAG_TSYNC_ESRCH (1UL << 4) +/* Received notifications wait in killable state (only respond to fatal signals) */ +#define SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV (1UL << 5) /* * All BPF programs must return a 32-bit value. @@ -113,8 +115,11 @@ struct seccomp_notif_resp { __u32 flags; }; +#define SECCOMP_USER_NOTIF_FD_SYNC_WAKE_UP (1UL << 0) + /* valid flags for seccomp_notif_addfd */ #define SECCOMP_ADDFD_FLAG_SETFD (1UL << 0) /* Specify remote fd */ +#define SECCOMP_ADDFD_FLAG_SEND (1UL << 1) /* Addfd and return it, atomically */ /** * struct seccomp_notif_addfd @@ -147,4 +152,6 @@ struct seccomp_notif_addfd { #define SECCOMP_IOCTL_NOTIF_ADDFD SECCOMP_IOW(3, \ struct seccomp_notif_addfd) +#define SECCOMP_IOCTL_NOTIF_SET_FLAGS SECCOMP_IOW(4, __u64) + #endif /* _LINUX_SECCOMP_H */ diff --git a/linux-headers/include/linux/sed-opal.h b/linux-headers/include/linux/sed-opal.h index 3004588947f..27c433a69b0 100644 --- a/linux-headers/include/linux/sed-opal.h +++ b/linux-headers/include/linux/sed-opal.h @@ -44,13 +44,28 @@ enum opal_lock_state { OPAL_LK = 0x04, /* 0100 */ }; +enum opal_lock_flags { + /* IOC_OPAL_SAVE will also store the provided key for locking */ + OPAL_SAVE_FOR_LOCK = 0x01, +}; + +enum opal_key_type { + OPAL_INCLUDED = 0, /* key[] is the key */ + OPAL_KEYRING, /* key is in keyring */ +}; + struct opal_key { __u8 lr; __u8 key_len; - __u8 __align[6]; + __u8 key_type; + __u8 __align[5]; __u8 key[OPAL_KEY_MAX]; }; +enum opal_revert_lsp_opts { + OPAL_PRESERVE = 0x01, +}; + struct opal_lr_act { struct opal_key key; __u32 sum; @@ -73,10 +88,21 @@ struct opal_user_lr_setup { struct opal_session_info session; }; +struct opal_lr_status { + struct opal_session_info session; + __u64 range_start; + __u64 range_length; + __u32 RLE; /* Read Lock enabled */ + __u32 WLE; /* Write Lock Enabled */ + __u32 l_state; + __u8 align[4]; +}; + struct opal_lock_unlock { struct opal_session_info session; __u32 l_state; - __u8 __align[4]; + __u16 flags; + __u8 __align[2]; }; struct opal_new_pw { @@ -132,6 +158,42 @@ struct opal_read_write_table { __u64 priv; }; +#define OPAL_FL_SUPPORTED 0x00000001 +#define OPAL_FL_LOCKING_SUPPORTED 0x00000002 +#define OPAL_FL_LOCKING_ENABLED 0x00000004 +#define OPAL_FL_LOCKED 0x00000008 +#define OPAL_FL_MBR_ENABLED 0x00000010 +#define OPAL_FL_MBR_DONE 0x00000020 +#define OPAL_FL_SUM_SUPPORTED 0x00000040 + +struct opal_status { + __u32 flags; + __u32 reserved; +}; + +/* + * Geometry Reporting per TCG Storage OPAL SSC + * section 3.1.1.4 + */ +struct opal_geometry { + __u8 align; + __u32 logical_block_size; + __u64 alignment_granularity; + __u64 lowest_aligned_lba; + __u8 __align[3]; +}; + +struct opal_discovery { + __u64 data; + __u64 size; +}; + +struct opal_revert_lsp { + struct opal_key key; + __u32 options; + __u32 __pad; +}; + #define IOC_OPAL_SAVE _IOW('p', 220, struct opal_lock_unlock) #define IOC_OPAL_LOCK_UNLOCK _IOW('p', 221, struct opal_lock_unlock) #define IOC_OPAL_TAKE_OWNERSHIP _IOW('p', 222, struct opal_key) @@ -148,5 +210,10 @@ struct opal_read_write_table { #define IOC_OPAL_MBR_DONE _IOW('p', 233, struct opal_mbr_done) #define IOC_OPAL_WRITE_SHADOW_MBR _IOW('p', 234, struct opal_shadow_mbr) #define IOC_OPAL_GENERIC_TABLE_RW _IOW('p', 235, struct opal_read_write_table) +#define IOC_OPAL_GET_STATUS _IOR('p', 236, struct opal_status) +#define IOC_OPAL_GET_LR_STATUS _IOW('p', 237, struct opal_lr_status) +#define IOC_OPAL_GET_GEOMETRY _IOR('p', 238, struct opal_geometry) +#define IOC_OPAL_DISCOVERY _IOW('p', 239, struct opal_discovery) +#define IOC_OPAL_REVERT_LSP _IOW('p', 240, struct opal_revert_lsp) #endif /* _SED_OPAL_H */ diff --git a/linux-headers/include/linux/seg6.h b/linux-headers/include/linux/seg6.h index 329163e4a08..e888b002b6e 100644 --- a/linux-headers/include/linux/seg6.h +++ b/linux-headers/include/linux/seg6.h @@ -30,7 +30,7 @@ struct ipv6_sr_hdr { __u8 flags; __u16 tag; - struct in6_addr segments[0]; + struct in6_addr segments[]; }; #define SR6_FLAG1_PROTECTED (1 << 6) diff --git a/linux-headers/include/linux/seg6_iptunnel.h b/linux-headers/include/linux/seg6_iptunnel.h index ee6d1dd5108..e1929d21c0b 100644 --- a/linux-headers/include/linux/seg6_iptunnel.h +++ b/linux-headers/include/linux/seg6_iptunnel.h @@ -26,7 +26,7 @@ enum { struct seg6_iptunnel_encap { int mode; - struct ipv6_sr_hdr srh[0]; + struct ipv6_sr_hdr srh[]; }; #define SEG6_IPTUN_ENCAP_SIZE(x) ((sizeof(*x)) + (((x)->srh->hdrlen + 1) << 3)) @@ -35,6 +35,8 @@ enum { SEG6_IPTUN_MODE_INLINE, SEG6_IPTUN_MODE_ENCAP, SEG6_IPTUN_MODE_L2ENCAP, + SEG6_IPTUN_MODE_ENCAP_RED, + SEG6_IPTUN_MODE_L2ENCAP_RED, }; #endif diff --git a/linux-headers/include/linux/seg6_local.h b/linux-headers/include/linux/seg6_local.h index 5312de80bcf..6e71d97f6f4 100644 --- a/linux-headers/include/linux/seg6_local.h +++ b/linux-headers/include/linux/seg6_local.h @@ -26,6 +26,9 @@ enum { SEG6_LOCAL_IIF, SEG6_LOCAL_OIF, SEG6_LOCAL_BPF, + SEG6_LOCAL_VRFTABLE, + SEG6_LOCAL_COUNTERS, + SEG6_LOCAL_FLAVORS, __SEG6_LOCAL_MAX, }; #define SEG6_LOCAL_MAX (__SEG6_LOCAL_MAX - 1) @@ -62,6 +65,8 @@ enum { SEG6_LOCAL_ACTION_END_AM = 14, /* custom BPF action */ SEG6_LOCAL_ACTION_END_BPF = 15, + /* decap and lookup of DA in v4 or v6 table */ + SEG6_LOCAL_ACTION_END_DT46 = 16, __SEG6_LOCAL_ACTION_MAX, }; @@ -77,4 +82,56 @@ enum { #define SEG6_LOCAL_BPF_PROG_MAX (__SEG6_LOCAL_BPF_PROG_MAX - 1) +/* SRv6 Behavior counters are encoded as netlink attributes guaranteeing the + * correct alignment. + * Each counter is identified by a different attribute type (i.e. + * SEG6_LOCAL_CNT_PACKETS). + * + * - SEG6_LOCAL_CNT_PACKETS: identifies a counter that counts the number of + * packets that have been CORRECTLY processed by an SRv6 Behavior instance + * (i.e., packets that generate errors or are dropped are NOT counted). + * + * - SEG6_LOCAL_CNT_BYTES: identifies a counter that counts the total amount + * of traffic in bytes of all packets that have been CORRECTLY processed by + * an SRv6 Behavior instance (i.e., packets that generate errors or are + * dropped are NOT counted). + * + * - SEG6_LOCAL_CNT_ERRORS: identifies a counter that counts the number of + * packets that have NOT been properly processed by an SRv6 Behavior instance + * (i.e., packets that generate errors or are dropped). + */ +enum { + SEG6_LOCAL_CNT_UNSPEC, + SEG6_LOCAL_CNT_PAD, /* pad for 64 bits values */ + SEG6_LOCAL_CNT_PACKETS, + SEG6_LOCAL_CNT_BYTES, + SEG6_LOCAL_CNT_ERRORS, + __SEG6_LOCAL_CNT_MAX, +}; + +#define SEG6_LOCAL_CNT_MAX (__SEG6_LOCAL_CNT_MAX - 1) + +/* SRv6 End* Flavor attributes */ +enum { + SEG6_LOCAL_FLV_UNSPEC, + SEG6_LOCAL_FLV_OPERATION, + SEG6_LOCAL_FLV_LCBLOCK_BITS, + SEG6_LOCAL_FLV_LCNODE_FN_BITS, + __SEG6_LOCAL_FLV_MAX, +}; + +#define SEG6_LOCAL_FLV_MAX (__SEG6_LOCAL_FLV_MAX - 1) + +/* Designed flavor operations for SRv6 End* Behavior */ +enum { + SEG6_LOCAL_FLV_OP_UNSPEC, + SEG6_LOCAL_FLV_OP_PSP, + SEG6_LOCAL_FLV_OP_USP, + SEG6_LOCAL_FLV_OP_USD, + SEG6_LOCAL_FLV_OP_NEXT_CSID, + __SEG6_LOCAL_FLV_OP_MAX +}; + +#define SEG6_LOCAL_FLV_OP_MAX (__SEG6_LOCAL_FLV_OP_MAX - 1) + #endif diff --git a/linux-headers/include/linux/serial.h b/linux-headers/include/linux/serial.h index 8aa64bc1328..99b6a151d50 100644 --- a/linux-headers/include/linux/serial.h +++ b/linux-headers/include/linux/serial.h @@ -52,11 +52,11 @@ struct serial_struct { #define PORT_16450 2 #define PORT_16550 3 #define PORT_16550A 4 -#define PORT_CIRRUS 5 /* usurped by cyclades.c */ +#define PORT_CIRRUS 5 #define PORT_16650 6 #define PORT_16650V2 7 #define PORT_16750 8 -#define PORT_STARTECH 9 /* usurped by cyclades.c */ +#define PORT_STARTECH 9 #define PORT_16C950 10 /* Oxford Semiconductor */ #define PORT_16654 11 #define PORT_16850 12 @@ -107,29 +107,62 @@ struct serial_icounter_struct { int reserved[9]; }; -/* +/** + * struct serial_rs485 - serial interface for controlling RS485 settings. + * @flags: RS485 feature flags. + * @delay_rts_before_send: Delay before send (milliseconds). + * @delay_rts_after_send: Delay after send (milliseconds). + * @addr_recv: Receive filter for RS485 addressing mode + * (used only when %SER_RS485_ADDR_RECV is set). + * @addr_dest: Destination address for RS485 addressing mode + * (used only when %SER_RS485_ADDR_DEST is set). + * @padding0: Padding (set to zero). + * @padding1: Padding (set to zero). + * @padding: Deprecated, use @padding0 and @padding1 instead. + * Do not use with @addr_recv and @addr_dest (due to + * overlap). + * * Serial interface for controlling RS485 settings on chips with suitable * support. Set with TIOCSRS485 and get with TIOCGRS485 if supported by your * platform. The set function returns the new state, with any unsupported bits * reverted appropriately. + * + * The flag bits are: + * + * * %SER_RS485_ENABLED - RS485 enabled. + * * %SER_RS485_RTS_ON_SEND - Logical level for RTS pin when sending. + * * %SER_RS485_RTS_AFTER_SEND - Logical level for RTS pin after sent. + * * %SER_RS485_RX_DURING_TX - Full-duplex RS485 line. + * * %SER_RS485_TERMINATE_BUS - Enable bus termination (if supported). + * * %SER_RS485_ADDRB - Enable RS485 addressing mode. + * * %SER_RS485_ADDR_RECV - Receive address filter (enables @addr_recv). Requires %SER_RS485_ADDRB. + * * %SER_RS485_ADDR_DEST - Destination address (enables @addr_dest). Requires %SER_RS485_ADDRB. */ - struct serial_rs485 { - __u32 flags; /* RS485 feature flags */ -#define SER_RS485_ENABLED (1 << 0) /* If enabled */ -#define SER_RS485_RTS_ON_SEND (1 << 1) /* Logical level for - RTS pin when - sending */ -#define SER_RS485_RTS_AFTER_SEND (1 << 2) /* Logical level for - RTS pin after sent*/ + __u32 flags; +#define SER_RS485_ENABLED (1 << 0) +#define SER_RS485_RTS_ON_SEND (1 << 1) +#define SER_RS485_RTS_AFTER_SEND (1 << 2) #define SER_RS485_RX_DURING_TX (1 << 4) -#define SER_RS485_TERMINATE_BUS (1 << 5) /* Enable bus - termination - (if supported) */ - __u32 delay_rts_before_send; /* Delay before send (milliseconds) */ - __u32 delay_rts_after_send; /* Delay after send (milliseconds) */ - __u32 padding[5]; /* Memory is cheap, new structs - are a royal PITA .. */ +#define SER_RS485_TERMINATE_BUS (1 << 5) +#define SER_RS485_ADDRB (1 << 6) +#define SER_RS485_ADDR_RECV (1 << 7) +#define SER_RS485_ADDR_DEST (1 << 8) + + __u32 delay_rts_before_send; + __u32 delay_rts_after_send; + + /* The fields below are defined by flags */ + union { + __u32 padding[5]; /* Memory is cheap, new structs are a pain */ + + struct { + __u8 addr_recv; + __u8 addr_dest; + __u8 padding0[2]; + __u32 padding1[4]; + }; + }; }; /* diff --git a/linux-headers/include/linux/serial_core.h b/linux-headers/include/linux/serial_core.h index 761ef415ce9..e57895f65ce 100644 --- a/linux-headers/include/linux/serial_core.h +++ b/linux-headers/include/linux/serial_core.h @@ -25,6 +25,8 @@ /* * The type definitions. These are from Ted Ts'o's serial.h + * By historical reasons the values from 0 to 13 are defined + * in the include/uapi/linux/serial.h, do not define them here. */ #define PORT_NS16550A 14 #define PORT_XSCALE 15 @@ -68,6 +70,9 @@ /* NVIDIA Tegra Combined UART */ #define PORT_TEGRA_TCU 41 +/* ASPEED AST2x00 virtual UART */ +#define PORT_ASPEED_VUART 42 + /* Intel EG20 */ #define PORT_PCH_8LINE 44 #define PORT_PCH_2LINE 45 @@ -91,15 +96,9 @@ #define PORT_SCIF 53 #define PORT_IRDA 54 -/* Samsung S3C2410 SoC and derivatives thereof */ -#define PORT_S3C2410 55 - /* SGI IP22 aka Indy / Challenge S / Indigo 2 */ #define PORT_IP22ZILOG 56 -/* Sharp LH7a40x -- an ARM9 SoC series */ -#define PORT_LH7A40X 57 - /* PPC CPM type number */ #define PORT_CPM 58 @@ -109,43 +108,23 @@ /* IBM icom */ #define PORT_ICOM 60 -/* Samsung S3C2440 SoC */ -#define PORT_S3C2440 61 - /* Motorola i.MX SoC */ #define PORT_IMX 62 -/* Marvell MPSC (obsolete unused) */ -#define PORT_MPSC 63 - /* TXX9 type number */ #define PORT_TXX9 64 -/* NEC VR4100 series SIU/DSIU */ -#define PORT_VR41XX_SIU 65 -#define PORT_VR41XX_DSIU 66 - -/* Samsung S3C2400 SoC */ -#define PORT_S3C2400 67 - -/* M32R SIO */ -#define PORT_M32R_SIO 68 - /*Digi jsm */ #define PORT_JSM 69 -#define PORT_PNX8XXX 70 - /* SUN4V Hypervisor Console */ #define PORT_SUNHV 72 -#define PORT_S3C2412 73 - /* Xilinx uartlite */ #define PORT_UARTLITE 74 -/* Blackfin bf5xx */ -#define PORT_BFIN 75 +/* Broadcom BCM7271 UART */ +#define PORT_BCM7271 76 /* Broadcom SB1250, etc. SOC */ #define PORT_SB1250_DUART 77 @@ -153,13 +132,6 @@ /* Freescale ColdFire */ #define PORT_MCF 78 -/* Blackfin SPORT */ -#define PORT_BFIN_SPORT 79 - -/* MN10300 on-chip UART numbers */ -#define PORT_MN10300 80 -#define PORT_MN10300_CTS 81 - #define PORT_SC26XX 82 /* SH-SCI */ @@ -167,9 +139,6 @@ #define PORT_S3C6400 84 -/* NWPSERIAL, now removed */ -#define PORT_NWPSERIAL 85 - /* MAX3100 */ #define PORT_MAX3100 86 @@ -210,8 +179,8 @@ /* Atheros AR933X SoC */ #define PORT_AR933X 99 -/* Energy Micro efm32 SoC */ -#define PORT_EFMUART 100 +/* MCHP 16550A UART with 256 byte FIFOs */ +#define PORT_MCHP16550A 100 /* ARC (Synopsys) on-chip UART */ #define PORT_ARC 101 @@ -228,13 +197,10 @@ /* ST ASC type numbers */ #define PORT_ASC 105 -/* Tilera TILE-Gx UART */ -#define PORT_TILEGX 106 - /* MEN 16z135 UART */ #define PORT_MEN_Z135 107 -/* SC16IS74xx */ +/* SC16IS7xx */ #define PORT_SC16IS7XX 108 /* MESON */ @@ -246,9 +212,6 @@ /* SPRD SERIAL */ #define PORT_SPRD 111 -/* Cris v10 / v32 SoC */ -#define PORT_CRIS 112 - /* STM32 USART */ #define PORT_STM32 113 @@ -279,4 +242,7 @@ /* Freescale LINFlexD UART */ #define PORT_LINFLEXUART 122 +/* Sunplus UART */ +#define PORT_SUNPLUS 123 + #endif /* LINUX_SERIAL_CORE_H */ diff --git a/linux-headers/include/linux/serial_reg.h b/linux-headers/include/linux/serial_reg.h index be07b5470f4..08b3527e1b9 100644 --- a/linux-headers/include/linux/serial_reg.h +++ b/linux-headers/include/linux/serial_reg.h @@ -44,6 +44,11 @@ #define UART_IIR_RX_TIMEOUT 0x0c /* OMAP RX Timeout interrupt */ #define UART_IIR_XOFF 0x10 /* OMAP XOFF/Special Character */ #define UART_IIR_CTS_RTS_DSR 0x20 /* OMAP CTS/RTS/DSR Change */ +#define UART_IIR_64BYTE_FIFO 0x20 /* 16750 64 bytes FIFO */ +#define UART_IIR_FIFO_ENABLED 0xc0 /* FIFOs enabled / port type identification */ +#define UART_IIR_FIFO_ENABLED_8250 0x00 /* 8250: no FIFO */ +#define UART_IIR_FIFO_ENABLED_16550 0x80 /* 16550: (broken/unusable) FIFO */ +#define UART_IIR_FIFO_ENABLED_16550A 0xc0 /* 16550A: FIFO enabled */ #define UART_FCR 2 /* Out: FIFO Control Register */ #define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */ @@ -62,6 +67,7 @@ * ST16C654: 8 16 56 60 8 16 32 56 PORT_16654 * TI16C750: 1 16 32 56 xx xx xx xx PORT_16750 * TI16C752: 8 16 56 60 8 16 32 56 + * OX16C950: 16 32 112 120 16 32 64 112 PORT_16C950 * Tegra: 1 4 8 14 16 8 4 1 PORT_TEGRA */ #define UART_FCR_R_TRIG_00 0x00 @@ -138,7 +144,7 @@ #define UART_LSR_PE 0x04 /* Parity error indicator */ #define UART_LSR_OE 0x02 /* Overrun error indicator */ #define UART_LSR_DR 0x01 /* Receiver data ready */ -#define UART_LSR_BRK_ERROR_BITS 0x1E /* BI, FE, PE, OE bits */ +#define UART_LSR_BRK_ERROR_BITS (UART_LSR_BI|UART_LSR_FE|UART_LSR_PE|UART_LSR_OE) #define UART_MSR 6 /* In: Modem Status Register */ #define UART_MSR_DCD 0x80 /* Data Carrier Detect */ @@ -149,7 +155,7 @@ #define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */ #define UART_MSR_DDSR 0x02 /* Delta DSR */ #define UART_MSR_DCTS 0x01 /* Delta CTS */ -#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */ +#define UART_MSR_ANY_DELTA (UART_MSR_DDCD|UART_MSR_TERI|UART_MSR_DDSR|UART_MSR_DCTS) #define UART_SCR 7 /* I/O: Scratch Register */ diff --git a/linux-headers/include/linux/sev-guest.h b/linux-headers/include/linux/sev-guest.h new file mode 100644 index 00000000000..2aa39112cf8 --- /dev/null +++ b/linux-headers/include/linux/sev-guest.h @@ -0,0 +1,94 @@ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ +/* + * Userspace interface for AMD SEV and SNP guest driver. + * + * Copyright (C) 2021 Advanced Micro Devices, Inc. + * + * Author: Brijesh Singh + * + * SEV API specification is available at: https://developer.amd.com/sev/ + */ + +#ifndef __UAPI_LINUX_SEV_GUEST_H_ +#define __UAPI_LINUX_SEV_GUEST_H_ + +#include + +struct snp_report_req { + /* user data that should be included in the report */ + __u8 user_data[64]; + + /* The vmpl level to be included in the report */ + __u32 vmpl; + + /* Must be zero filled */ + __u8 rsvd[28]; +}; + +struct snp_report_resp { + /* response data, see SEV-SNP spec for the format */ + __u8 data[4000]; +}; + +struct snp_derived_key_req { + __u32 root_key_select; + __u32 rsvd; + __u64 guest_field_select; + __u32 vmpl; + __u32 guest_svn; + __u64 tcb_version; +}; + +struct snp_derived_key_resp { + /* response data, see SEV-SNP spec for the format */ + __u8 data[64]; +}; + +struct snp_guest_request_ioctl { + /* message version number (must be non-zero) */ + __u8 msg_version; + + /* Request and response structure address */ + __u64 req_data; + __u64 resp_data; + + /* bits[63:32]: VMM error code, bits[31:0] firmware error code (see psp-sev.h) */ + union { + __u64 exitinfo2; + struct { + __u32 fw_error; + __u32 vmm_error; + }; + }; +}; + +struct snp_ext_report_req { + struct snp_report_req data; + + /* where to copy the certificate blob */ + __u64 certs_address; + + /* length of the certificate blob */ + __u32 certs_len; +}; + +#define SNP_GUEST_REQ_IOC_TYPE 'S' + +/* Get SNP attestation report */ +#define SNP_GET_REPORT _IOWR(SNP_GUEST_REQ_IOC_TYPE, 0x0, struct snp_guest_request_ioctl) + +/* Get a derived key from the root */ +#define SNP_GET_DERIVED_KEY _IOWR(SNP_GUEST_REQ_IOC_TYPE, 0x1, struct snp_guest_request_ioctl) + +/* Get SNP extended report as defined in the GHCB specification version 2. */ +#define SNP_GET_EXT_REPORT _IOWR(SNP_GUEST_REQ_IOC_TYPE, 0x2, struct snp_guest_request_ioctl) + +/* Guest message request EXIT_INFO_2 constants */ +#define SNP_GUEST_FW_ERR_MASK GENMASK_ULL(31, 0) +#define SNP_GUEST_VMM_ERR_SHIFT 32 +#define SNP_GUEST_VMM_ERR(x) (((u64)x) << SNP_GUEST_VMM_ERR_SHIFT) + +#define SNP_GUEST_VMM_ERR_INVALID_LEN 1 +#define SNP_GUEST_VMM_ERR_BUSY 2 + +#endif /* __UAPI_LINUX_SEV_GUEST_H_ */ diff --git a/linux-headers/include/linux/smc.h b/linux-headers/include/linux/smc.h index 55f209f2002..d2546bb814f 100644 --- a/linux-headers/include/linux/smc.h +++ b/linux-headers/include/linux/smc.h @@ -33,4 +33,273 @@ enum { /* SMC PNET Table commands */ #define SMCR_GENL_FAMILY_NAME "SMC_PNETID" #define SMCR_GENL_FAMILY_VERSION 1 +/* gennetlink interface to access non-socket information from SMC module */ +#define SMC_GENL_FAMILY_NAME "SMC_GEN_NETLINK" +#define SMC_GENL_FAMILY_VERSION 1 + +#define SMC_PCI_ID_STR_LEN 16 /* Max length of pci id string */ +#define SMC_MAX_HOSTNAME_LEN 32 /* Max length of the hostname */ +#define SMC_MAX_UEID 4 /* Max number of user EIDs */ +#define SMC_MAX_EID_LEN 32 /* Max length of an EID */ + +/* SMC_GENL_FAMILY commands */ +enum { + SMC_NETLINK_GET_SYS_INFO = 1, + SMC_NETLINK_GET_LGR_SMCR, + SMC_NETLINK_GET_LINK_SMCR, + SMC_NETLINK_GET_LGR_SMCD, + SMC_NETLINK_GET_DEV_SMCD, + SMC_NETLINK_GET_DEV_SMCR, + SMC_NETLINK_GET_STATS, + SMC_NETLINK_GET_FBACK_STATS, + SMC_NETLINK_DUMP_UEID, + SMC_NETLINK_ADD_UEID, + SMC_NETLINK_REMOVE_UEID, + SMC_NETLINK_FLUSH_UEID, + SMC_NETLINK_DUMP_SEID, + SMC_NETLINK_ENABLE_SEID, + SMC_NETLINK_DISABLE_SEID, + SMC_NETLINK_DUMP_HS_LIMITATION, + SMC_NETLINK_ENABLE_HS_LIMITATION, + SMC_NETLINK_DISABLE_HS_LIMITATION, +}; + +/* SMC_GENL_FAMILY top level attributes */ +enum { + SMC_GEN_UNSPEC, + SMC_GEN_SYS_INFO, /* nest */ + SMC_GEN_LGR_SMCR, /* nest */ + SMC_GEN_LINK_SMCR, /* nest */ + SMC_GEN_LGR_SMCD, /* nest */ + SMC_GEN_DEV_SMCD, /* nest */ + SMC_GEN_DEV_SMCR, /* nest */ + SMC_GEN_STATS, /* nest */ + SMC_GEN_FBACK_STATS, /* nest */ + __SMC_GEN_MAX, + SMC_GEN_MAX = __SMC_GEN_MAX - 1 +}; + +/* SMC_GEN_SYS_INFO attributes */ +enum { + SMC_NLA_SYS_UNSPEC, + SMC_NLA_SYS_VER, /* u8 */ + SMC_NLA_SYS_REL, /* u8 */ + SMC_NLA_SYS_IS_ISM_V2, /* u8 */ + SMC_NLA_SYS_LOCAL_HOST, /* string */ + SMC_NLA_SYS_SEID, /* string */ + SMC_NLA_SYS_IS_SMCR_V2, /* u8 */ + __SMC_NLA_SYS_MAX, + SMC_NLA_SYS_MAX = __SMC_NLA_SYS_MAX - 1 +}; + +/* SMC_NLA_LGR_D_V2_COMMON and SMC_NLA_LGR_R_V2_COMMON nested attributes */ +enum { + SMC_NLA_LGR_V2_VER, /* u8 */ + SMC_NLA_LGR_V2_REL, /* u8 */ + SMC_NLA_LGR_V2_OS, /* u8 */ + SMC_NLA_LGR_V2_NEG_EID, /* string */ + SMC_NLA_LGR_V2_PEER_HOST, /* string */ + __SMC_NLA_LGR_V2_MAX, + SMC_NLA_LGR_V2_MAX = __SMC_NLA_LGR_V2_MAX - 1 +}; + +/* SMC_NLA_LGR_R_V2 nested attributes */ +enum { + SMC_NLA_LGR_R_V2_UNSPEC, + SMC_NLA_LGR_R_V2_DIRECT, /* u8 */ + SMC_NLA_LGR_R_V2_MAX_CONNS, /* u8 */ + SMC_NLA_LGR_R_V2_MAX_LINKS, /* u8 */ + __SMC_NLA_LGR_R_V2_MAX, + SMC_NLA_LGR_R_V2_MAX = __SMC_NLA_LGR_R_V2_MAX - 1 +}; + +/* SMC_GEN_LGR_SMCR attributes */ +enum { + SMC_NLA_LGR_R_UNSPEC, + SMC_NLA_LGR_R_ID, /* u32 */ + SMC_NLA_LGR_R_ROLE, /* u8 */ + SMC_NLA_LGR_R_TYPE, /* u8 */ + SMC_NLA_LGR_R_PNETID, /* string */ + SMC_NLA_LGR_R_VLAN_ID, /* u8 */ + SMC_NLA_LGR_R_CONNS_NUM, /* u32 */ + SMC_NLA_LGR_R_V2_COMMON, /* nest */ + SMC_NLA_LGR_R_V2, /* nest */ + SMC_NLA_LGR_R_NET_COOKIE, /* u64 */ + SMC_NLA_LGR_R_PAD, /* flag */ + SMC_NLA_LGR_R_BUF_TYPE, /* u8 */ + __SMC_NLA_LGR_R_MAX, + SMC_NLA_LGR_R_MAX = __SMC_NLA_LGR_R_MAX - 1 +}; + +/* SMC_GEN_LINK_SMCR attributes */ +enum { + SMC_NLA_LINK_UNSPEC, + SMC_NLA_LINK_ID, /* u8 */ + SMC_NLA_LINK_IB_DEV, /* string */ + SMC_NLA_LINK_IB_PORT, /* u8 */ + SMC_NLA_LINK_GID, /* string */ + SMC_NLA_LINK_PEER_GID, /* string */ + SMC_NLA_LINK_CONN_CNT, /* u32 */ + SMC_NLA_LINK_NET_DEV, /* u32 */ + SMC_NLA_LINK_UID, /* u32 */ + SMC_NLA_LINK_PEER_UID, /* u32 */ + SMC_NLA_LINK_STATE, /* u32 */ + __SMC_NLA_LINK_MAX, + SMC_NLA_LINK_MAX = __SMC_NLA_LINK_MAX - 1 +}; + +/* SMC_GEN_LGR_SMCD attributes */ +enum { + SMC_NLA_LGR_D_UNSPEC, + SMC_NLA_LGR_D_ID, /* u32 */ + SMC_NLA_LGR_D_GID, /* u64 */ + SMC_NLA_LGR_D_PEER_GID, /* u64 */ + SMC_NLA_LGR_D_VLAN_ID, /* u8 */ + SMC_NLA_LGR_D_CONNS_NUM, /* u32 */ + SMC_NLA_LGR_D_PNETID, /* string */ + SMC_NLA_LGR_D_CHID, /* u16 */ + SMC_NLA_LGR_D_PAD, /* flag */ + SMC_NLA_LGR_D_V2_COMMON, /* nest */ + __SMC_NLA_LGR_D_MAX, + SMC_NLA_LGR_D_MAX = __SMC_NLA_LGR_D_MAX - 1 +}; + +/* SMC_NLA_DEV_PORT nested attributes */ +enum { + SMC_NLA_DEV_PORT_UNSPEC, + SMC_NLA_DEV_PORT_PNET_USR, /* u8 */ + SMC_NLA_DEV_PORT_PNETID, /* string */ + SMC_NLA_DEV_PORT_NETDEV, /* u32 */ + SMC_NLA_DEV_PORT_STATE, /* u8 */ + SMC_NLA_DEV_PORT_VALID, /* u8 */ + SMC_NLA_DEV_PORT_LNK_CNT, /* u32 */ + __SMC_NLA_DEV_PORT_MAX, + SMC_NLA_DEV_PORT_MAX = __SMC_NLA_DEV_PORT_MAX - 1 +}; + +/* SMC_GEN_DEV_SMCD and SMC_GEN_DEV_SMCR attributes */ +enum { + SMC_NLA_DEV_UNSPEC, + SMC_NLA_DEV_USE_CNT, /* u32 */ + SMC_NLA_DEV_IS_CRIT, /* u8 */ + SMC_NLA_DEV_PCI_FID, /* u32 */ + SMC_NLA_DEV_PCI_CHID, /* u16 */ + SMC_NLA_DEV_PCI_VENDOR, /* u16 */ + SMC_NLA_DEV_PCI_DEVICE, /* u16 */ + SMC_NLA_DEV_PCI_ID, /* string */ + SMC_NLA_DEV_PORT, /* nest */ + SMC_NLA_DEV_PORT2, /* nest */ + SMC_NLA_DEV_IB_NAME, /* string */ + __SMC_NLA_DEV_MAX, + SMC_NLA_DEV_MAX = __SMC_NLA_DEV_MAX - 1 +}; + +/* SMC_NLA_STATS_T_TX(RX)_RMB_SIZE nested attributes */ +/* SMC_NLA_STATS_TX(RX)PLOAD_SIZE nested attributes */ +enum { + SMC_NLA_STATS_PLOAD_PAD, + SMC_NLA_STATS_PLOAD_8K, /* u64 */ + SMC_NLA_STATS_PLOAD_16K, /* u64 */ + SMC_NLA_STATS_PLOAD_32K, /* u64 */ + SMC_NLA_STATS_PLOAD_64K, /* u64 */ + SMC_NLA_STATS_PLOAD_128K, /* u64 */ + SMC_NLA_STATS_PLOAD_256K, /* u64 */ + SMC_NLA_STATS_PLOAD_512K, /* u64 */ + SMC_NLA_STATS_PLOAD_1024K, /* u64 */ + SMC_NLA_STATS_PLOAD_G_1024K, /* u64 */ + __SMC_NLA_STATS_PLOAD_MAX, + SMC_NLA_STATS_PLOAD_MAX = __SMC_NLA_STATS_PLOAD_MAX - 1 +}; + +/* SMC_NLA_STATS_T_TX(RX)_RMB_STATS nested attributes */ +enum { + SMC_NLA_STATS_RMB_PAD, + SMC_NLA_STATS_RMB_SIZE_SM_PEER_CNT, /* u64 */ + SMC_NLA_STATS_RMB_SIZE_SM_CNT, /* u64 */ + SMC_NLA_STATS_RMB_FULL_PEER_CNT, /* u64 */ + SMC_NLA_STATS_RMB_FULL_CNT, /* u64 */ + SMC_NLA_STATS_RMB_REUSE_CNT, /* u64 */ + SMC_NLA_STATS_RMB_ALLOC_CNT, /* u64 */ + SMC_NLA_STATS_RMB_DGRADE_CNT, /* u64 */ + __SMC_NLA_STATS_RMB_MAX, + SMC_NLA_STATS_RMB_MAX = __SMC_NLA_STATS_RMB_MAX - 1 +}; + +/* SMC_NLA_STATS_SMCD_TECH and _SMCR_TECH nested attributes */ +enum { + SMC_NLA_STATS_T_PAD, + SMC_NLA_STATS_T_TX_RMB_SIZE, /* nest */ + SMC_NLA_STATS_T_RX_RMB_SIZE, /* nest */ + SMC_NLA_STATS_T_TXPLOAD_SIZE, /* nest */ + SMC_NLA_STATS_T_RXPLOAD_SIZE, /* nest */ + SMC_NLA_STATS_T_TX_RMB_STATS, /* nest */ + SMC_NLA_STATS_T_RX_RMB_STATS, /* nest */ + SMC_NLA_STATS_T_CLNT_V1_SUCC, /* u64 */ + SMC_NLA_STATS_T_CLNT_V2_SUCC, /* u64 */ + SMC_NLA_STATS_T_SRV_V1_SUCC, /* u64 */ + SMC_NLA_STATS_T_SRV_V2_SUCC, /* u64 */ + SMC_NLA_STATS_T_SENDPAGE_CNT, /* u64 */ + SMC_NLA_STATS_T_SPLICE_CNT, /* u64 */ + SMC_NLA_STATS_T_CORK_CNT, /* u64 */ + SMC_NLA_STATS_T_NDLY_CNT, /* u64 */ + SMC_NLA_STATS_T_URG_DATA_CNT, /* u64 */ + SMC_NLA_STATS_T_RX_BYTES, /* u64 */ + SMC_NLA_STATS_T_TX_BYTES, /* u64 */ + SMC_NLA_STATS_T_RX_CNT, /* u64 */ + SMC_NLA_STATS_T_TX_CNT, /* u64 */ + __SMC_NLA_STATS_T_MAX, + SMC_NLA_STATS_T_MAX = __SMC_NLA_STATS_T_MAX - 1 +}; + +/* SMC_GEN_STATS attributes */ +enum { + SMC_NLA_STATS_PAD, + SMC_NLA_STATS_SMCD_TECH, /* nest */ + SMC_NLA_STATS_SMCR_TECH, /* nest */ + SMC_NLA_STATS_CLNT_HS_ERR_CNT, /* u64 */ + SMC_NLA_STATS_SRV_HS_ERR_CNT, /* u64 */ + __SMC_NLA_STATS_MAX, + SMC_NLA_STATS_MAX = __SMC_NLA_STATS_MAX - 1 +}; + +/* SMC_GEN_FBACK_STATS attributes */ +enum { + SMC_NLA_FBACK_STATS_PAD, + SMC_NLA_FBACK_STATS_TYPE, /* u8 */ + SMC_NLA_FBACK_STATS_SRV_CNT, /* u64 */ + SMC_NLA_FBACK_STATS_CLNT_CNT, /* u64 */ + SMC_NLA_FBACK_STATS_RSN_CODE, /* u32 */ + SMC_NLA_FBACK_STATS_RSN_CNT, /* u16 */ + __SMC_NLA_FBACK_STATS_MAX, + SMC_NLA_FBACK_STATS_MAX = __SMC_NLA_FBACK_STATS_MAX - 1 +}; + +/* SMC_NETLINK_UEID attributes */ +enum { + SMC_NLA_EID_TABLE_UNSPEC, + SMC_NLA_EID_TABLE_ENTRY, /* string */ + __SMC_NLA_EID_TABLE_MAX, + SMC_NLA_EID_TABLE_MAX = __SMC_NLA_EID_TABLE_MAX - 1 +}; + +/* SMC_NETLINK_SEID attributes */ +enum { + SMC_NLA_SEID_UNSPEC, + SMC_NLA_SEID_ENTRY, /* string */ + SMC_NLA_SEID_ENABLED, /* u8 */ + __SMC_NLA_SEID_TABLE_MAX, + SMC_NLA_SEID_TABLE_MAX = __SMC_NLA_SEID_TABLE_MAX - 1 +}; + +/* SMC_NETLINK_HS_LIMITATION attributes */ +enum { + SMC_NLA_HS_LIMITATION_UNSPEC, + SMC_NLA_HS_LIMITATION_ENABLED, /* u8 */ + __SMC_NLA_HS_LIMITATION_MAX, + SMC_NLA_HS_LIMITATION_MAX = __SMC_NLA_HS_LIMITATION_MAX - 1 +}; + +/* SMC socket options */ +#define SMC_LIMIT_HS 1 /* constraint on smc handshake */ + #endif /* _LINUX_SMC_H */ diff --git a/linux-headers/include/linux/snmp.h b/linux-headers/include/linux/snmp.h index f84e7bcad6d..26f33a4c253 100644 --- a/linux-headers/include/linux/snmp.h +++ b/linux-headers/include/linux/snmp.h @@ -95,6 +95,8 @@ enum ICMP_MIB_OUTADDRMASKS, /* OutAddrMasks */ ICMP_MIB_OUTADDRMASKREPS, /* OutAddrMaskReps */ ICMP_MIB_CSUMERRORS, /* InCsumErrors */ + ICMP_MIB_RATELIMITGLOBAL, /* OutRateLimitGlobal */ + ICMP_MIB_RATELIMITHOST, /* OutRateLimitHost */ __ICMP_MIB_MAX }; @@ -112,6 +114,7 @@ enum ICMP6_MIB_OUTMSGS, /* OutMsgs */ ICMP6_MIB_OUTERRORS, /* OutErrors */ ICMP6_MIB_CSUMERRORS, /* InCsumErrors */ + ICMP6_MIB_RATELIMITHOST, /* OutRateLimitHost */ __ICMP6_MIB_MAX }; @@ -159,6 +162,7 @@ enum UDP_MIB_SNDBUFERRORS, /* SndbufErrors */ UDP_MIB_CSUMERRORS, /* InCsumErrors */ UDP_MIB_IGNOREDMULTI, /* IgnoredMulti */ + UDP_MIB_MEMERRORS, /* MemErrors */ __UDP_MIB_MAX }; @@ -289,6 +293,9 @@ enum LINUX_MIB_TCPDUPLICATEDATAREHASH, /* TCPDuplicateDataRehash */ LINUX_MIB_TCPDSACKRECVSEGS, /* TCPDSACKRecvSegs */ LINUX_MIB_TCPDSACKIGNOREDDUBIOUS, /* TCPDSACKIgnoredDubious */ + LINUX_MIB_TCPMIGRATEREQSUCCESS, /* TCPMigrateReqSuccess */ + LINUX_MIB_TCPMIGRATEREQFAILURE, /* TCPMigrateReqFailure */ + LINUX_MIB_TCPPLBREHASH, /* TCPPLBRehash */ __LINUX_MIB_MAX }; @@ -341,6 +348,8 @@ enum LINUX_MIB_TLSRXDEVICE, /* TlsRxDevice */ LINUX_MIB_TLSDECRYPTERROR, /* TlsDecryptError */ LINUX_MIB_TLSRXDEVICERESYNC, /* TlsRxDeviceResync */ + LINUX_MIB_TLSDECRYPTRETRY, /* TlsDecryptRetry */ + LINUX_MIB_TLSRXNOPADVIOL, /* TlsRxNoPadViolation */ __LINUX_MIB_TLSMAX }; diff --git a/linux-headers/include/linux/socket.h b/linux-headers/include/linux/socket.h index debcf26f6c2..89c227f3d4c 100644 --- a/linux-headers/include/linux/socket.h +++ b/linux-headers/include/linux/socket.h @@ -26,4 +26,13 @@ struct __kernel_sockaddr_storage { }; }; +#define SOCK_SNDBUF_LOCK 1 +#define SOCK_RCVBUF_LOCK 2 + +#define SOCK_BUF_LOCK_MASK (SOCK_SNDBUF_LOCK | SOCK_RCVBUF_LOCK) + +#define SOCK_TXREHASH_DEFAULT 255 +#define SOCK_TXREHASH_DISABLED 0 +#define SOCK_TXREHASH_ENABLED 1 + #endif /* _LINUX_SOCKET_H */ diff --git a/linux-headers/include/linux/soundcard.h b/linux-headers/include/linux/soundcard.h index c5abf865c85..c630a4bb805 100644 --- a/linux-headers/include/linux/soundcard.h +++ b/linux-headers/include/linux/soundcard.h @@ -1046,7 +1046,7 @@ typedef struct mixer_vol_table { * the GPL version of OSS-4.x and build against that version * of the header. * - * We redefine the extern keyword so that make headers_check + * We redefine the extern keyword so that usr/include/headers_check.pl * does not complain about SEQ_USE_EXTBUF. */ #define SEQ_DECLAREBUF() SEQ_USE_EXTBUF() diff --git a/linux-headers/include/linux/spi/spi.h b/linux-headers/include/linux/spi/spi.h new file mode 100644 index 00000000000..0381bd3a888 --- /dev/null +++ b/linux-headers/include/linux/spi/spi.h @@ -0,0 +1,43 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +#ifndef _SPI_H +#define _SPI_H + +#include + +#define SPI_CPHA _BITUL(0) /* clock phase */ +#define SPI_CPOL _BITUL(1) /* clock polarity */ + +#define SPI_MODE_0 (0|0) /* (original MicroWire) */ +#define SPI_MODE_1 (0|SPI_CPHA) +#define SPI_MODE_2 (SPI_CPOL|0) +#define SPI_MODE_3 (SPI_CPOL|SPI_CPHA) +#define SPI_MODE_X_MASK (SPI_CPOL|SPI_CPHA) + +#define SPI_CS_HIGH _BITUL(2) /* chipselect active high? */ +#define SPI_LSB_FIRST _BITUL(3) /* per-word bits-on-wire */ +#define SPI_3WIRE _BITUL(4) /* SI/SO signals shared */ +#define SPI_LOOP _BITUL(5) /* loopback mode */ +#define SPI_NO_CS _BITUL(6) /* 1 dev/bus, no chipselect */ +#define SPI_READY _BITUL(7) /* slave pulls low to pause */ +#define SPI_TX_DUAL _BITUL(8) /* transmit with 2 wires */ +#define SPI_TX_QUAD _BITUL(9) /* transmit with 4 wires */ +#define SPI_RX_DUAL _BITUL(10) /* receive with 2 wires */ +#define SPI_RX_QUAD _BITUL(11) /* receive with 4 wires */ +#define SPI_CS_WORD _BITUL(12) /* toggle cs after each word */ +#define SPI_TX_OCTAL _BITUL(13) /* transmit with 8 wires */ +#define SPI_RX_OCTAL _BITUL(14) /* receive with 8 wires */ +#define SPI_3WIRE_HIZ _BITUL(15) /* high impedance turnaround */ +#define SPI_RX_CPHA_FLIP _BITUL(16) /* flip CPHA on Rx only xfer */ +#define SPI_MOSI_IDLE_LOW _BITUL(17) /* leave mosi line low when idle */ + +/* + * All the bits defined above should be covered by SPI_MODE_USER_MASK. + * The SPI_MODE_USER_MASK has the SPI_MODE_KERNEL_MASK counterpart in + * 'include/linux/spi/spi.h'. The bits defined here are from bit 0 upwards + * while in SPI_MODE_KERNEL_MASK they are from the other end downwards. + * These bits must not overlap. A static assert check should make sure of that. + * If adding extra bits, make sure to increase the bit index below as well. + */ +#define SPI_MODE_USER_MASK (_BITUL(18) - 1) + +#endif /* _SPI_H */ diff --git a/linux-headers/include/linux/spi/spidev.h b/linux-headers/include/linux/spi/spidev.h index d56427c0b3e..0c3da08f2af 100644 --- a/linux-headers/include/linux/spi/spidev.h +++ b/linux-headers/include/linux/spi/spidev.h @@ -25,35 +25,7 @@ #include #include - -/* User space versions of kernel symbols for SPI clocking modes, - * matching - */ - -#define SPI_CPHA 0x01 -#define SPI_CPOL 0x02 - -#define SPI_MODE_0 (0|0) -#define SPI_MODE_1 (0|SPI_CPHA) -#define SPI_MODE_2 (SPI_CPOL|0) -#define SPI_MODE_3 (SPI_CPOL|SPI_CPHA) - -#define SPI_CS_HIGH 0x04 -#define SPI_LSB_FIRST 0x08 -#define SPI_3WIRE 0x10 -#define SPI_LOOP 0x20 -#define SPI_NO_CS 0x40 -#define SPI_READY 0x80 -#define SPI_TX_DUAL 0x100 -#define SPI_TX_QUAD 0x200 -#define SPI_RX_DUAL 0x400 -#define SPI_RX_QUAD 0x800 -#define SPI_CS_WORD 0x1000 -#define SPI_TX_OCTAL 0x2000 -#define SPI_RX_OCTAL 0x4000 -#define SPI_3WIRE_HIZ 0x8000 - -/*---------------------------------------------------------------------------*/ +#include /* IOCTL commands */ diff --git a/linux-headers/include/linux/stat.h b/linux-headers/include/linux/stat.h index e8b625e1b08..e0d106dc0a0 100644 --- a/linux-headers/include/linux/stat.h +++ b/linux-headers/include/linux/stat.h @@ -124,7 +124,8 @@ struct statx { __u32 stx_dev_minor; /* 0x90 */ __u64 stx_mnt_id; - __u64 __spare2; + __u32 stx_dio_mem_align; /* Memory buffer alignment for direct I/O */ + __u32 stx_dio_offset_align; /* File offset alignment for direct I/O */ /* 0xa0 */ __u64 __spare3[12]; /* Spare space for future expansion */ /* 0x100 */ @@ -152,6 +153,7 @@ struct statx { #define STATX_BASIC_STATS 0x000007ffU /* The stuff in the normal stat struct */ #define STATX_BTIME 0x00000800U /* Want/got stx_btime */ #define STATX_MNT_ID 0x00001000U /* Got stx_mnt_id */ +#define STATX_DIOALIGN 0x00002000U /* Want/got direct I/O alignment info */ #define STATX__RESERVED 0x80000000U /* Reserved for future struct statx expansion */ diff --git a/linux-headers/include/linux/stddef.h b/linux-headers/include/linux/stddef.h index 23e025fec04..b3d4a9c170e 100644 --- a/linux-headers/include/linux/stddef.h +++ b/linux-headers/include/linux/stddef.h @@ -1,6 +1,58 @@ /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _LINUX_STDDEF_H +#define _LINUX_STDDEF_H + #ifndef __always_inline #define __always_inline __inline__ #endif + +/** + * __struct_group() - Create a mirrored named and anonyomous struct + * + * @TAG: The tag name for the named sub-struct (usually empty) + * @NAME: The identifier name of the mirrored sub-struct + * @ATTRS: Any struct attributes (usually empty) + * @MEMBERS: The member declarations for the mirrored structs + * + * Used to create an anonymous union of two structs with identical layout + * and size: one anonymous and one named. The former's members can be used + * normally without sub-struct naming, and the latter can be used to + * reason about the start, end, and size of the group of struct members. + * The named struct can also be explicitly tagged for layer reuse, as well + * as both having struct attributes appended. + */ +#define __struct_group(TAG, NAME, ATTRS, MEMBERS...) \ + union { \ + struct { MEMBERS } ATTRS; \ + struct TAG { MEMBERS } ATTRS NAME; \ + } + +#ifdef __cplusplus +/* sizeof(struct{}) is 1 in C++, not 0, can't use C version of the macro. */ +#define __DECLARE_FLEX_ARRAY(T, member) \ + T member[0] +#else +/** + * __DECLARE_FLEX_ARRAY() - Declare a flexible array usable in a union + * + * @TYPE: The type of each flexible array element + * @NAME: The name of the flexible array member + * + * In order to have a flexible array member in a union or alone in a + * struct, it needs to be wrapped in an anonymous struct with at least 1 + * named member, but that member can be empty. + */ +#define __DECLARE_FLEX_ARRAY(TYPE, NAME) \ + struct { \ + struct { } __empty_ ## NAME; \ + TYPE NAME[]; \ + } +#endif + +#ifndef __counted_by +#define __counted_by(m) +#endif + +#endif /* _LINUX_STDDEF_H */ diff --git a/linux-headers/include/linux/stm.h b/linux-headers/include/linux/stm.h index 8daeae4131d..c0aa0ff5450 100644 --- a/linux-headers/include/linux/stm.h +++ b/linux-headers/include/linux/stm.h @@ -36,7 +36,7 @@ struct stp_policy_id { /* padding */ __u16 __reserved_0; __u32 __reserved_1; - char id[0]; + char id[]; }; #define STP_POLICY_ID_SET _IOWR('%', 0, struct stp_policy_id) diff --git a/linux-headers/include/linux/surface_aggregator/cdev.h b/linux-headers/include/linux/surface_aggregator/cdev.h new file mode 100644 index 00000000000..cf0c63d3c05 --- /dev/null +++ b/linux-headers/include/linux/surface_aggregator/cdev.h @@ -0,0 +1,147 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * Surface System Aggregator Module (SSAM) user-space EC interface. + * + * Definitions, structs, and IOCTLs for the /dev/surface/aggregator misc + * device. This device provides direct user-space access to the SSAM EC. + * Intended for debugging and development. + * + * Copyright (C) 2020-2021 Maximilian Luz + */ + +#ifndef _LINUX_SURFACE_AGGREGATOR_CDEV_H +#define _LINUX_SURFACE_AGGREGATOR_CDEV_H + +#include +#include + +/** + * enum ssam_cdev_request_flags - Request flags for SSAM cdev request IOCTL. + * + * @SSAM_CDEV_REQUEST_HAS_RESPONSE: + * Specifies that the request expects a response. If not set, the request + * will be directly completed after its underlying packet has been + * transmitted. If set, the request transport system waits for a response + * of the request. + * + * @SSAM_CDEV_REQUEST_UNSEQUENCED: + * Specifies that the request should be transmitted via an unsequenced + * packet. If set, the request must not have a response, meaning that this + * flag and the %SSAM_CDEV_REQUEST_HAS_RESPONSE flag are mutually + * exclusive. + */ +enum ssam_cdev_request_flags { + SSAM_CDEV_REQUEST_HAS_RESPONSE = 0x01, + SSAM_CDEV_REQUEST_UNSEQUENCED = 0x02, +}; + +/** + * struct ssam_cdev_request - Controller request IOCTL argument. + * @target_category: Target category of the SAM request. + * @target_id: Target ID of the SAM request. + * @command_id: Command ID of the SAM request. + * @instance_id: Instance ID of the SAM request. + * @flags: Request flags (see &enum ssam_cdev_request_flags). + * @status: Request status (output). + * @payload: Request payload (input data). + * @payload.data: Pointer to request payload data. + * @payload.length: Length of request payload data (in bytes). + * @response: Request response (output data). + * @response.data: Pointer to response buffer. + * @response.length: On input: Capacity of response buffer (in bytes). + * On output: Length of request response (number of bytes + * in the buffer that are actually used). + */ +struct ssam_cdev_request { + __u8 target_category; + __u8 target_id; + __u8 command_id; + __u8 instance_id; + __u16 flags; + __s16 status; + + struct { + __u64 data; + __u16 length; + __u8 __pad[6]; + } payload; + + struct { + __u64 data; + __u16 length; + __u8 __pad[6]; + } response; +} __attribute__((__packed__)); + +/** + * struct ssam_cdev_notifier_desc - Notifier descriptor. + * @priority: Priority value determining the order in which notifier + * callbacks will be called. A higher value means higher + * priority, i.e. the associated callback will be executed + * earlier than other (lower priority) callbacks. + * @target_category: The event target category for which this notifier should + * receive events. + * + * Specifies the notifier that should be registered or unregistered, + * specifically with which priority and for which target category of events. + */ +struct ssam_cdev_notifier_desc { + __s32 priority; + __u8 target_category; +} __attribute__((__packed__)); + +/** + * struct ssam_cdev_event_desc - Event descriptor. + * @reg: Registry via which the event will be enabled/disabled. + * @reg.target_category: Target category for the event registry requests. + * @reg.target_id: Target ID for the event registry requests. + * @reg.cid_enable: Command ID for the event-enable request. + * @reg.cid_disable: Command ID for the event-disable request. + * @id: ID specifying the event. + * @id.target_category: Target category of the event source. + * @id.instance: Instance ID of the event source. + * @flags: Flags used for enabling the event. + * + * Specifies which event should be enabled/disabled and how to do that. + */ +struct ssam_cdev_event_desc { + struct { + __u8 target_category; + __u8 target_id; + __u8 cid_enable; + __u8 cid_disable; + } reg; + + struct { + __u8 target_category; + __u8 instance; + } id; + + __u8 flags; +} __attribute__((__packed__)); + +/** + * struct ssam_cdev_event - SSAM event sent by the EC. + * @target_category: Target category of the event source. See &enum ssam_ssh_tc. + * @target_id: Target ID of the event source. + * @command_id: Command ID of the event. + * @instance_id: Instance ID of the event source. + * @length: Length of the event payload in bytes. + * @data: Event payload data. + */ +struct ssam_cdev_event { + __u8 target_category; + __u8 target_id; + __u8 command_id; + __u8 instance_id; + __u16 length; + __u8 data[]; +} __attribute__((__packed__)); + +#define SSAM_CDEV_REQUEST _IOWR(0xA5, 1, struct ssam_cdev_request) +#define SSAM_CDEV_NOTIF_REGISTER _IOW(0xA5, 2, struct ssam_cdev_notifier_desc) +#define SSAM_CDEV_NOTIF_UNREGISTER _IOW(0xA5, 3, struct ssam_cdev_notifier_desc) +#define SSAM_CDEV_EVENT_ENABLE _IOW(0xA5, 4, struct ssam_cdev_event_desc) +#define SSAM_CDEV_EVENT_DISABLE _IOW(0xA5, 5, struct ssam_cdev_event_desc) + +#endif /* _LINUX_SURFACE_AGGREGATOR_CDEV_H */ diff --git a/linux-headers/include/linux/surface_aggregator/dtx.h b/linux-headers/include/linux/surface_aggregator/dtx.h new file mode 100644 index 00000000000..250ef062d19 --- /dev/null +++ b/linux-headers/include/linux/surface_aggregator/dtx.h @@ -0,0 +1,146 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * Surface DTX (clipboard detachment system driver) user-space interface. + * + * Definitions, structs, and IOCTLs for the /dev/surface/dtx misc device. This + * device allows user-space to control the clipboard detachment process on + * Surface Book series devices. + * + * Copyright (C) 2020-2021 Maximilian Luz + */ + +#ifndef _LINUX_SURFACE_AGGREGATOR_DTX_H +#define _LINUX_SURFACE_AGGREGATOR_DTX_H + +#include +#include + +/* Status/error categories */ +#define SDTX_CATEGORY_STATUS 0x0000 +#define SDTX_CATEGORY_RUNTIME_ERROR 0x1000 +#define SDTX_CATEGORY_HARDWARE_ERROR 0x2000 +#define SDTX_CATEGORY_UNKNOWN 0xf000 + +#define SDTX_CATEGORY_MASK 0xf000 +#define SDTX_CATEGORY(value) ((value) & SDTX_CATEGORY_MASK) + +#define SDTX_STATUS(code) ((code) | SDTX_CATEGORY_STATUS) +#define SDTX_ERR_RT(code) ((code) | SDTX_CATEGORY_RUNTIME_ERROR) +#define SDTX_ERR_HW(code) ((code) | SDTX_CATEGORY_HARDWARE_ERROR) +#define SDTX_UNKNOWN(code) ((code) | SDTX_CATEGORY_UNKNOWN) + +#define SDTX_SUCCESS(value) (SDTX_CATEGORY(value) == SDTX_CATEGORY_STATUS) + +/* Latch status values */ +#define SDTX_LATCH_CLOSED SDTX_STATUS(0x00) +#define SDTX_LATCH_OPENED SDTX_STATUS(0x01) + +/* Base state values */ +#define SDTX_BASE_DETACHED SDTX_STATUS(0x00) +#define SDTX_BASE_ATTACHED SDTX_STATUS(0x01) + +/* Runtime errors (non-critical) */ +#define SDTX_DETACH_NOT_FEASIBLE SDTX_ERR_RT(0x01) +#define SDTX_DETACH_TIMEDOUT SDTX_ERR_RT(0x02) + +/* Hardware errors (critical) */ +#define SDTX_ERR_FAILED_TO_OPEN SDTX_ERR_HW(0x01) +#define SDTX_ERR_FAILED_TO_REMAIN_OPEN SDTX_ERR_HW(0x02) +#define SDTX_ERR_FAILED_TO_CLOSE SDTX_ERR_HW(0x03) + +/* Base types */ +#define SDTX_DEVICE_TYPE_HID 0x0100 +#define SDTX_DEVICE_TYPE_SSH 0x0200 + +#define SDTX_DEVICE_TYPE_MASK 0x0f00 +#define SDTX_DEVICE_TYPE(value) ((value) & SDTX_DEVICE_TYPE_MASK) + +#define SDTX_BASE_TYPE_HID(id) ((id) | SDTX_DEVICE_TYPE_HID) +#define SDTX_BASE_TYPE_SSH(id) ((id) | SDTX_DEVICE_TYPE_SSH) + +/** + * enum sdtx_device_mode - Mode describing how (and if) the clipboard is + * attached to the base of the device. + * @SDTX_DEVICE_MODE_TABLET: The clipboard is detached from the base and the + * device operates as tablet. + * @SDTX_DEVICE_MODE_LAPTOP: The clipboard is attached normally to the base + * and the device operates as laptop. + * @SDTX_DEVICE_MODE_STUDIO: The clipboard is attached to the base in reverse. + * The device operates as tablet with keyboard and + * touchpad deactivated, however, the base battery + * and, if present in the specific device model, dGPU + * are available to the system. + */ +enum sdtx_device_mode { + SDTX_DEVICE_MODE_TABLET = 0x00, + SDTX_DEVICE_MODE_LAPTOP = 0x01, + SDTX_DEVICE_MODE_STUDIO = 0x02, +}; + +/** + * struct sdtx_event - Event provided by reading from the DTX device file. + * @length: Length of the event payload, in bytes. + * @code: Event code, detailing what type of event this is. + * @data: Payload of the event, containing @length bytes. + * + * See &enum sdtx_event_code for currently valid event codes. + */ +struct sdtx_event { + __u16 length; + __u16 code; + __u8 data[]; +} __attribute__((__packed__)); + +/** + * enum sdtx_event_code - Code describing the type of an event. + * @SDTX_EVENT_REQUEST: Detachment request event type. + * @SDTX_EVENT_CANCEL: Cancel detachment process event type. + * @SDTX_EVENT_BASE_CONNECTION: Base/clipboard connection change event type. + * @SDTX_EVENT_LATCH_STATUS: Latch status change event type. + * @SDTX_EVENT_DEVICE_MODE: Device mode change event type. + * + * Used in &struct sdtx_event to describe the type of the event. Further event + * codes are reserved for future use. Any event parser should be able to + * gracefully handle unknown events, i.e. by simply skipping them. + * + * Consult the DTX user-space interface documentation for details regarding + * the individual event types. + */ +enum sdtx_event_code { + SDTX_EVENT_REQUEST = 1, + SDTX_EVENT_CANCEL = 2, + SDTX_EVENT_BASE_CONNECTION = 3, + SDTX_EVENT_LATCH_STATUS = 4, + SDTX_EVENT_DEVICE_MODE = 5, +}; + +/** + * struct sdtx_base_info - Describes if and what type of base is connected. + * @state: The state of the connection. Valid values are %SDTX_BASE_DETACHED, + * %SDTX_BASE_ATTACHED, and %SDTX_DETACH_NOT_FEASIBLE (in case a base + * is attached but low clipboard battery prevents detachment). Other + * values are currently reserved. + * @base_id: The type of base connected. Zero if no base is connected. + */ +struct sdtx_base_info { + __u16 state; + __u16 base_id; +} __attribute__((__packed__)); + +/* IOCTLs */ +#define SDTX_IOCTL_EVENTS_ENABLE _IO(0xa5, 0x21) +#define SDTX_IOCTL_EVENTS_DISABLE _IO(0xa5, 0x22) + +#define SDTX_IOCTL_LATCH_LOCK _IO(0xa5, 0x23) +#define SDTX_IOCTL_LATCH_UNLOCK _IO(0xa5, 0x24) + +#define SDTX_IOCTL_LATCH_REQUEST _IO(0xa5, 0x25) +#define SDTX_IOCTL_LATCH_CONFIRM _IO(0xa5, 0x26) +#define SDTX_IOCTL_LATCH_HEARTBEAT _IO(0xa5, 0x27) +#define SDTX_IOCTL_LATCH_CANCEL _IO(0xa5, 0x28) + +#define SDTX_IOCTL_GET_BASE_INFO _IOR(0xa5, 0x29, struct sdtx_base_info) +#define SDTX_IOCTL_GET_DEVICE_MODE _IOR(0xa5, 0x2a, __u16) +#define SDTX_IOCTL_GET_LATCH_STATUS _IOR(0xa5, 0x2b, __u16) + +#endif /* _LINUX_SURFACE_AGGREGATOR_DTX_H */ diff --git a/linux-headers/include/linux/swab.h b/linux-headers/include/linux/swab.h index e90116a6f6e..7e3bad56cf8 100644 --- a/linux-headers/include/linux/swab.h +++ b/linux-headers/include/linux/swab.h @@ -3,7 +3,7 @@ #define _LINUX_SWAB_H #include - +#include #include #include @@ -102,7 +102,7 @@ static __inline__ __u32 __fswahb32(__u32 val) #define __swab16(x) (__u16)__builtin_bswap16((__u16)(x)) #else #define __swab16(x) \ - (__builtin_constant_p((__u16)(x)) ? \ + (__u16)(__builtin_constant_p(x) ? \ ___constant_swab16(x) : \ __fswab16(x)) #endif @@ -115,7 +115,7 @@ static __inline__ __u32 __fswahb32(__u32 val) #define __swab32(x) (__u32)__builtin_bswap32((__u32)(x)) #else #define __swab32(x) \ - (__builtin_constant_p((__u32)(x)) ? \ + (__u32)(__builtin_constant_p(x) ? \ ___constant_swab32(x) : \ __fswab32(x)) #endif @@ -128,7 +128,7 @@ static __inline__ __u32 __fswahb32(__u32 val) #define __swab64(x) (__u64)__builtin_bswap64((__u64)(x)) #else #define __swab64(x) \ - (__builtin_constant_p((__u64)(x)) ? \ + (__u64)(__builtin_constant_p(x) ? \ ___constant_swab64(x) : \ __fswab64(x)) #endif diff --git a/linux-headers/include/linux/sync_file.h b/linux-headers/include/linux/sync_file.h index b4f2db00934..831974ae606 100644 --- a/linux-headers/include/linux/sync_file.h +++ b/linux-headers/include/linux/sync_file.h @@ -16,12 +16,16 @@ #include /** - * struct sync_merge_data - data passed to merge ioctl + * struct sync_merge_data - SYNC_IOC_MERGE: merge two fences * @name: name of new fence * @fd2: file descriptor of second fence * @fence: returns the fd of the new fence to userspace * @flags: merge_data flags * @pad: padding for 64-bit alignment, should always be zero + * + * Creates a new fence containing copies of the sync_pts in both + * the calling fd and sync_merge_data.fd2. Returns the new fence's + * fd in sync_merge_data.fence */ struct sync_merge_data { char name[32]; @@ -34,8 +38,8 @@ struct sync_merge_data { /** * struct sync_fence_info - detailed fence information * @obj_name: name of parent sync_timeline -* @driver_name: name of driver implementing the parent -* @status: status of the fence 0:active 1:signaled <0:error + * @driver_name: name of driver implementing the parent + * @status: status of the fence 0:active 1:signaled <0:error * @flags: fence_info flags * @timestamp_ns: timestamp of status change in nanoseconds */ @@ -48,14 +52,19 @@ struct sync_fence_info { }; /** - * struct sync_file_info - data returned from fence info ioctl + * struct sync_file_info - SYNC_IOC_FILE_INFO: get detailed information on a sync_file * @name: name of fence * @status: status of fence. 1: signaled 0:active <0:error * @flags: sync_file_info flags - * @num_fences number of fences in the sync_file + * @num_fences: number of fences in the sync_file * @pad: padding for 64-bit alignment, should always be zero - * @sync_fence_info: pointer to array of structs sync_fence_info with all + * @sync_fence_info: pointer to array of struct &sync_fence_info with all * fences in the sync_file + * + * Takes a struct sync_file_info. If num_fences is 0, the field is updated + * with the actual number of fences. If num_fences is > 0, the system will + * use the pointer provided on sync_fence_info to return up to num_fences of + * struct sync_fence_info, with detailed fence information. */ struct sync_file_info { char name[32]; @@ -69,30 +78,14 @@ struct sync_file_info { #define SYNC_IOC_MAGIC '>' -/** +/* * Opcodes 0, 1 and 2 were burned during a API change to avoid users of the * old API to get weird errors when trying to handling sync_files. The API * change happened during the de-stage of the Sync Framework when there was * no upstream users available. */ -/** - * DOC: SYNC_IOC_MERGE - merge two fences - * - * Takes a struct sync_merge_data. Creates a new fence containing copies of - * the sync_pts in both the calling fd and sync_merge_data.fd2. Returns the - * new fence's fd in sync_merge_data.fence - */ #define SYNC_IOC_MERGE _IOWR(SYNC_IOC_MAGIC, 3, struct sync_merge_data) - -/** - * DOC: SYNC_IOC_FILE_INFO - get detailed information on a sync_file - * - * Takes a struct sync_file_info. If num_fences is 0, the field is updated - * with the actual number of fences. If num_fences is > 0, the system will - * use the pointer provided on sync_fence_info to return up to num_fences of - * struct sync_fence_info, with detailed fence information. - */ #define SYNC_IOC_FILE_INFO _IOWR(SYNC_IOC_MAGIC, 4, struct sync_file_info) #endif /* _LINUX_SYNC_H */ diff --git a/linux-headers/include/linux/sysctl.h b/linux-headers/include/linux/sysctl.h index 6414bc13849..b8501ac873a 100644 --- a/linux-headers/include/linux/sysctl.h +++ b/linux-headers/include/linux/sysctl.h @@ -482,6 +482,7 @@ enum NET_IPV4_CONF_PROMOTE_SECONDARIES=20, NET_IPV4_CONF_ARP_ACCEPT=21, NET_IPV4_CONF_ARP_NOTIFY=22, + NET_IPV4_CONF_ARP_EVICT_NOCARRIER=23, }; /* /proc/sys/net/ipv4/netfilter */ @@ -571,6 +572,7 @@ enum { NET_IPV6_ACCEPT_SOURCE_ROUTE=25, NET_IPV6_ACCEPT_RA_FROM_LOCAL=26, NET_IPV6_ACCEPT_RA_RT_INFO_MIN_PLEN=27, + NET_IPV6_RA_DEFRTR_METRIC=28, __NET_IPV6_MAX }; @@ -582,24 +584,25 @@ enum { /* /proc/sys/net//neigh/ */ enum { - NET_NEIGH_MCAST_SOLICIT=1, - NET_NEIGH_UCAST_SOLICIT=2, - NET_NEIGH_APP_SOLICIT=3, - NET_NEIGH_RETRANS_TIME=4, - NET_NEIGH_REACHABLE_TIME=5, - NET_NEIGH_DELAY_PROBE_TIME=6, - NET_NEIGH_GC_STALE_TIME=7, - NET_NEIGH_UNRES_QLEN=8, - NET_NEIGH_PROXY_QLEN=9, - NET_NEIGH_ANYCAST_DELAY=10, - NET_NEIGH_PROXY_DELAY=11, - NET_NEIGH_LOCKTIME=12, - NET_NEIGH_GC_INTERVAL=13, - NET_NEIGH_GC_THRESH1=14, - NET_NEIGH_GC_THRESH2=15, - NET_NEIGH_GC_THRESH3=16, - NET_NEIGH_RETRANS_TIME_MS=17, - NET_NEIGH_REACHABLE_TIME_MS=18, + NET_NEIGH_MCAST_SOLICIT = 1, + NET_NEIGH_UCAST_SOLICIT = 2, + NET_NEIGH_APP_SOLICIT = 3, + NET_NEIGH_RETRANS_TIME = 4, + NET_NEIGH_REACHABLE_TIME = 5, + NET_NEIGH_DELAY_PROBE_TIME = 6, + NET_NEIGH_GC_STALE_TIME = 7, + NET_NEIGH_UNRES_QLEN = 8, + NET_NEIGH_PROXY_QLEN = 9, + NET_NEIGH_ANYCAST_DELAY = 10, + NET_NEIGH_PROXY_DELAY = 11, + NET_NEIGH_LOCKTIME = 12, + NET_NEIGH_GC_INTERVAL = 13, + NET_NEIGH_GC_THRESH1 = 14, + NET_NEIGH_GC_THRESH2 = 15, + NET_NEIGH_GC_THRESH3 = 16, + NET_NEIGH_RETRANS_TIME_MS = 17, + NET_NEIGH_REACHABLE_TIME_MS = 18, + NET_NEIGH_INTERVAL_PROBE_TIME_MS = 19, }; /* /proc/sys/net/dccp */ diff --git a/linux-headers/include/linux/target_core_user.h b/linux-headers/include/linux/target_core_user.h index e1971c061df..1201fe82cf0 100644 --- a/linux-headers/include/linux/target_core_user.h +++ b/linux-headers/include/linux/target_core_user.h @@ -46,6 +46,7 @@ #define TCMU_MAILBOX_FLAG_CAP_OOOC (1 << 0) /* Out-of-order completions */ #define TCMU_MAILBOX_FLAG_CAP_READ_LEN (1 << 1) /* Read data length */ #define TCMU_MAILBOX_FLAG_CAP_TMR (1 << 2) /* TMR notifications */ +#define TCMU_MAILBOX_FLAG_CAP_KEEP_BUF (1<<3) /* Keep buf after cmd completion */ struct tcmu_mailbox { __u16 version; @@ -75,6 +76,7 @@ struct tcmu_cmd_entry_hdr { __u8 kflags; #define TCMU_UFLAG_UNKNOWN_OP 0x1 #define TCMU_UFLAG_READ_LEN 0x2 +#define TCMU_UFLAG_KEEP_BUF 0x4 __u8 uflags; } __attribute__((packed)); @@ -117,7 +119,7 @@ struct tcmu_cmd_entry { __u64 cdb_off; __u64 __pad1; __u64 __pad2; - struct iovec iov[0]; + __DECLARE_FLEX_ARRAY(struct iovec, iov); } req; struct { __u8 scsi_status; @@ -150,7 +152,7 @@ struct tcmu_tmr_entry { __u32 cmd_cnt; __u64 __pad3; __u64 __pad4; - __u16 cmd_ids[0]; + __u16 cmd_ids[]; } __attribute__((packed)); #define TCMU_OP_ALIGN_SIZE sizeof(__u64) diff --git a/linux-headers/include/linux/taskstats.h b/linux-headers/include/linux/taskstats.h index ccbd0870932..b50b2eb257a 100644 --- a/linux-headers/include/linux/taskstats.h +++ b/linux-headers/include/linux/taskstats.h @@ -34,7 +34,7 @@ */ -#define TASKSTATS_VERSION 10 +#define TASKSTATS_VERSION 14 #define TS_COMM_LEN 32 /* should be >= TASK_COMM_LEN * in linux/sched.h */ @@ -48,7 +48,8 @@ struct taskstats { __u32 ac_exitcode; /* Exit status */ /* The accounting flags of a task as defined in - * Defined values are AFORK, ASU, ACOMPAT, ACORE, and AXSIG. + * Defined values are AFORK, ASU, ACOMPAT, ACORE, AXSIG, and AGROUP. + * (AGROUP since version 12). */ __u8 ac_flag; /* Record flags */ __u8 ac_nice; /* task_nice */ @@ -172,6 +173,35 @@ struct taskstats { /* v10: 64-bit btime to avoid overflow */ __u64 ac_btime64; /* 64-bit begin time */ + + /* v11: Delay waiting for memory compact */ + __u64 compact_count; + __u64 compact_delay_total; + + /* v12 begin */ + __u32 ac_tgid; /* thread group ID */ + /* Thread group walltime up to now. This is total process walltime if + * AGROUP flag is set. + */ + __u64 ac_tgetime __attribute__((aligned(8))); + /* Lightweight information to identify process binary files. + * This leaves userspace to match this to a file system path, using + * MAJOR() and MINOR() macros to identify a device and mount point, + * the inode to identify the executable file. This is /proc/self/exe + * at the end, so matching the most recent exec(). Values are zero + * for kernel threads. + */ + __u64 ac_exe_dev; /* program binary device ID */ + __u64 ac_exe_inode; /* program binary inode number */ + /* v12 end */ + + /* v13: Delay waiting for write-protect copy */ + __u64 wpcopy_count; + __u64 wpcopy_delay_total; + + /* v14: Delay waiting for IRQ/SOFTIRQ */ + __u64 irq_count; + __u64 irq_delay_total; }; diff --git a/linux-headers/include/linux/tc_act/tc_bpf.h b/linux-headers/include/linux/tc_act/tc_bpf.h index 653c4f94f76..fe6c8f8f3e8 100644 --- a/linux-headers/include/linux/tc_act/tc_bpf.h +++ b/linux-headers/include/linux/tc_act/tc_bpf.h @@ -1,11 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ /* * Copyright (c) 2015 Jiri Pirko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #ifndef __LINUX_TC_BPF_H diff --git a/linux-headers/include/linux/tc_act/tc_ct.h b/linux-headers/include/linux/tc_act/tc_ct.h index 5fb1d7ac102..6c5200f0ed3 100644 --- a/linux-headers/include/linux/tc_act/tc_ct.h +++ b/linux-headers/include/linux/tc_act/tc_ct.h @@ -22,6 +22,9 @@ enum { TCA_CT_NAT_PORT_MIN, /* be16 */ TCA_CT_NAT_PORT_MAX, /* be16 */ TCA_CT_PAD, + TCA_CT_HELPER_NAME, /* string */ + TCA_CT_HELPER_FAMILY, /* u8 */ + TCA_CT_HELPER_PROTO, /* u8 */ __TCA_CT_MAX }; diff --git a/linux-headers/include/linux/tc_act/tc_skbedit.h b/linux-headers/include/linux/tc_act/tc_skbedit.h index 800e9337721..64032513cc4 100644 --- a/linux-headers/include/linux/tc_act/tc_skbedit.h +++ b/linux-headers/include/linux/tc_act/tc_skbedit.h @@ -2,19 +2,6 @@ /* * Copyright (c) 2008, Intel Corporation. * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 Temple - * Place - Suite 330, Boston, MA 02111-1307 USA. - * * Author: Alexander Duyck */ @@ -29,6 +16,7 @@ #define SKBEDIT_F_PTYPE 0x8 #define SKBEDIT_F_MASK 0x10 #define SKBEDIT_F_INHERITDSFIELD 0x20 +#define SKBEDIT_F_TXQ_SKBHASH 0x40 struct tc_skbedit { tc_gen; @@ -45,6 +33,7 @@ enum { TCA_SKBEDIT_PTYPE, TCA_SKBEDIT_MASK, TCA_SKBEDIT_FLAGS, + TCA_SKBEDIT_QUEUE_MAPPING_MAX, __TCA_SKBEDIT_MAX }; #define TCA_SKBEDIT_MAX (__TCA_SKBEDIT_MAX - 1) diff --git a/linux-headers/include/linux/tc_act/tc_skbmod.h b/linux-headers/include/linux/tc_act/tc_skbmod.h index c525b350379..ac62c9a993e 100644 --- a/linux-headers/include/linux/tc_act/tc_skbmod.h +++ b/linux-headers/include/linux/tc_act/tc_skbmod.h @@ -1,12 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ /* * Copyright (c) 2016, Jamal Hadi Salim - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. -*/ + */ #ifndef __LINUX_TC_SKBMOD_H #define __LINUX_TC_SKBMOD_H @@ -17,6 +12,7 @@ #define SKBMOD_F_SMAC 0x2 #define SKBMOD_F_ETYPE 0x4 #define SKBMOD_F_SWAPMAC 0x8 +#define SKBMOD_F_ECN 0x10 struct tc_skbmod { tc_gen; diff --git a/linux-headers/include/linux/tc_act/tc_tunnel_key.h b/linux-headers/include/linux/tc_act/tc_tunnel_key.h index 3f10dc4e7a4..37c6f612f16 100644 --- a/linux-headers/include/linux/tc_act/tc_tunnel_key.h +++ b/linux-headers/include/linux/tc_act/tc_tunnel_key.h @@ -2,11 +2,6 @@ /* * Copyright (c) 2016, Amir Vadai * Copyright (c) 2016, Mellanox Technologies. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #ifndef __LINUX_TC_TUNNEL_KEY_H @@ -39,6 +34,7 @@ enum { */ TCA_TUNNEL_KEY_ENC_TOS, /* u8 */ TCA_TUNNEL_KEY_ENC_TTL, /* u8 */ + TCA_TUNNEL_KEY_NO_FRAG, /* flag */ __TCA_TUNNEL_KEY_MAX, }; diff --git a/linux-headers/include/linux/tc_act/tc_vlan.h b/linux-headers/include/linux/tc_act/tc_vlan.h index 5b306fe815c..3e1f8e57cdd 100644 --- a/linux-headers/include/linux/tc_act/tc_vlan.h +++ b/linux-headers/include/linux/tc_act/tc_vlan.h @@ -1,11 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ /* * Copyright (c) 2014 Jiri Pirko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #ifndef __LINUX_TC_VLAN_H diff --git a/linux-headers/include/linux/tcp.h b/linux-headers/include/linux/tcp.h index ee670e8848a..4ee5d7721c6 100644 --- a/linux-headers/include/linux/tcp.h +++ b/linux-headers/include/linux/tcp.h @@ -51,7 +51,7 @@ struct tcphdr { fin:1; #else #error "Adjust your defines" -#endif +#endif __be16 window; __sum16 check; __be16 urg_ptr; @@ -62,14 +62,14 @@ struct tcphdr { * (union is compatible to any of its members) * This means this part of the code is -fstrict-aliasing safe now. */ -union tcp_word_hdr { +union tcp_word_hdr { struct tcphdr hdr; - __be32 words[5]; -}; + __be32 words[5]; +}; -#define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3]) +#define tcp_flag_word(tp) (((union tcp_word_hdr *)(tp))->words[3]) -enum { +enum { TCP_FLAG_CWR = __constant_cpu_to_be32(0x00800000), TCP_FLAG_ECE = __constant_cpu_to_be32(0x00400000), TCP_FLAG_URG = __constant_cpu_to_be32(0x00200000), @@ -80,7 +80,7 @@ enum { TCP_FLAG_FIN = __constant_cpu_to_be32(0x00010000), TCP_RESERVED_BITS = __constant_cpu_to_be32(0x0F000000), TCP_DATA_OFFSET = __constant_cpu_to_be32(0xF0000000) -}; +}; /* * TCP general constants @@ -103,8 +103,8 @@ enum { #define TCP_QUICKACK 12 /* Block/reenable quick acks */ #define TCP_CONGESTION 13 /* Congestion control algorithm */ #define TCP_MD5SIG 14 /* TCP MD5 Signature (RFC2385) */ -#define TCP_THIN_LINEAR_TIMEOUTS 16 /* Use linear timeouts for thin streams*/ -#define TCP_THIN_DUPACK 17 /* Fast retrans. after 1 dupack */ +#define TCP_THIN_LINEAR_TIMEOUTS 16 /* Use linear timeouts for thin streams*/ +#define TCP_THIN_DUPACK 17 /* Fast retrans. after 1 dupack */ #define TCP_USER_TIMEOUT 18 /* How long for loss retry before timeout */ #define TCP_REPAIR 19 /* TCP sock is under repair right now */ #define TCP_REPAIR_QUEUE 20 @@ -284,6 +284,11 @@ struct tcp_info { __u32 tcpi_snd_wnd; /* peer's advertised receive window after * scaling (bytes) */ + __u32 tcpi_rcv_wnd; /* local advertised receive window after + * scaling (bytes) + */ + + __u32 tcpi_rehash; /* PLB or timeout triggered rehash attempts */ }; /* netlink attributes types for SCM_TIMESTAMPING_OPT_STATS */ @@ -314,6 +319,8 @@ enum { TCP_NLA_TIMEOUT_REHASH, /* Timeout-triggered rehash attempts */ TCP_NLA_BYTES_NOTSENT, /* Bytes in write queue not yet sent */ TCP_NLA_EDT, /* Earliest departure time (CLOCK_MONOTONIC) */ + TCP_NLA_TTL, /* TTL or hop limit of a packet received */ + TCP_NLA_REHASH, /* PLB and timeout triggered rehash attempts */ }; /* for TCP_MD5SIG socket option */ @@ -343,11 +350,19 @@ struct tcp_diag_md5sig { /* setsockopt(fd, IPPROTO_TCP, TCP_ZEROCOPY_RECEIVE, ...) */ +#define TCP_RECEIVE_ZEROCOPY_FLAG_TLB_CLEAN_HINT 0x1 struct tcp_zerocopy_receive { __u64 address; /* in: address of mapping */ __u32 length; /* in/out: number of bytes to map/mapped */ __u32 recv_skip_hint; /* out: amount of bytes to skip */ __u32 inq; /* out: amount of bytes in read queue */ __s32 err; /* out: socket error */ + __u64 copybuf_address; /* in: copybuf address (small reads) */ + __s32 copybuf_len; /* in/out: copybuf bytes avail/used or error */ + __u32 flags; /* in: flags */ + __u64 msg_control; /* ancillary data */ + __u64 msg_controllen; + __u32 msg_flags; + __u32 reserved; /* set to 0 for now */ }; #endif /* _LINUX_TCP_H */ diff --git a/linux-headers/include/linux/tdx-guest.h b/linux-headers/include/linux/tdx-guest.h new file mode 100644 index 00000000000..beb80556fbd --- /dev/null +++ b/linux-headers/include/linux/tdx-guest.h @@ -0,0 +1,42 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Userspace interface for TDX guest driver + * + * Copyright (C) 2022 Intel Corporation + */ + +#ifndef _LINUX_TDX_GUEST_H_ +#define _LINUX_TDX_GUEST_H_ + +#include +#include + +/* Length of the REPORTDATA used in TDG.MR.REPORT TDCALL */ +#define TDX_REPORTDATA_LEN 64 + +/* Length of TDREPORT used in TDG.MR.REPORT TDCALL */ +#define TDX_REPORT_LEN 1024 + +/** + * struct tdx_report_req - Request struct for TDX_CMD_GET_REPORT0 IOCTL. + * + * @reportdata: User buffer with REPORTDATA to be included into TDREPORT. + * Typically it can be some nonce provided by attestation + * service, so the generated TDREPORT can be uniquely verified. + * @tdreport: User buffer to store TDREPORT output from TDCALL[TDG.MR.REPORT]. + */ +struct tdx_report_req { + __u8 reportdata[TDX_REPORTDATA_LEN]; + __u8 tdreport[TDX_REPORT_LEN]; +}; + +/* + * TDX_CMD_GET_REPORT0 - Get TDREPORT0 (a.k.a. TDREPORT subtype 0) using + * TDCALL[TDG.MR.REPORT] + * + * Return 0 on success, -EIO on TDCALL execution failure, and + * standard errno on other general error cases. + */ +#define TDX_CMD_GET_REPORT0 _IOWR('T', 1, struct tdx_report_req) + +#endif /* _LINUX_TDX_GUEST_H_ */ diff --git a/linux-headers/include/linux/tee.h b/linux-headers/include/linux/tee.h index ded17e2302a..92f54386608 100644 --- a/linux-headers/include/linux/tee.h +++ b/linux-headers/include/linux/tee.h @@ -42,10 +42,6 @@ #define TEE_IOC_MAGIC 0xa4 #define TEE_IOC_BASE 0 -/* Flags relating to shared memory */ -#define TEE_IOCTL_SHM_MAPPED 0x1 /* memory mapped in normal world */ -#define TEE_IOCTL_SHM_DMA_BUF 0x2 /* dma-buf handle on shared memory */ - #define TEE_MAX_ARG_SIZE 1024 #define TEE_GEN_CAP_GP (1 << 0)/* GlobalPlatform compliant TEE */ @@ -355,7 +351,7 @@ struct tee_iocl_supp_send_arg { }; /** - * TEE_IOC_SUPPL_SEND - Receive a request for a supplicant function + * TEE_IOC_SUPPL_SEND - Send a response to a received request * * Takes a struct tee_ioctl_buf_data which contains a struct * tee_iocl_supp_send_arg followed by any array of struct tee_param diff --git a/linux-headers/include/linux/termios.h b/linux-headers/include/linux/termios.h index 33961d4e4de..e6da9d4433d 100644 --- a/linux-headers/include/linux/termios.h +++ b/linux-headers/include/linux/termios.h @@ -5,19 +5,4 @@ #include #include -#define NFF 5 - -struct termiox -{ - __u16 x_hflag; - __u16 x_cflag; - __u16 x_rflag[NFF]; - __u16 x_sflag; -}; - -#define RTSXOFF 0x0001 /* RTS flow control on input */ -#define CTSXON 0x0002 /* CTS flow control on output */ -#define DTRXOFF 0x0004 /* DTR flow control on input */ -#define DSRXON 0x0008 /* DCD flow control on output */ - #endif diff --git a/linux-headers/include/linux/thermal.h b/linux-headers/include/linux/thermal.h index 70ade3965fa..801286e4702 100644 --- a/linux-headers/include/linux/thermal.h +++ b/linux-headers/include/linux/thermal.h @@ -44,7 +44,10 @@ enum thermal_genl_attr { THERMAL_GENL_ATTR_CDEV_MAX_STATE, THERMAL_GENL_ATTR_CDEV_NAME, THERMAL_GENL_ATTR_GOV_NAME, - + THERMAL_GENL_ATTR_CPU_CAPABILITY, + THERMAL_GENL_ATTR_CPU_CAPABILITY_ID, + THERMAL_GENL_ATTR_CPU_CAPABILITY_PERFORMANCE, + THERMAL_GENL_ATTR_CPU_CAPABILITY_EFFICIENCY, __THERMAL_GENL_ATTR_MAX, }; #define THERMAL_GENL_ATTR_MAX (__THERMAL_GENL_ATTR_MAX - 1) @@ -60,7 +63,7 @@ enum thermal_genl_event { THERMAL_GENL_EVENT_UNSPEC, THERMAL_GENL_EVENT_TZ_CREATE, /* Thermal zone creation */ THERMAL_GENL_EVENT_TZ_DELETE, /* Thermal zone deletion */ - THERMAL_GENL_EVENT_TZ_DISABLE, /* Thermal zone disabed */ + THERMAL_GENL_EVENT_TZ_DISABLE, /* Thermal zone disabled */ THERMAL_GENL_EVENT_TZ_ENABLE, /* Thermal zone enabled */ THERMAL_GENL_EVENT_TZ_TRIP_UP, /* Trip point crossed the way up */ THERMAL_GENL_EVENT_TZ_TRIP_DOWN, /* Trip point crossed the way down */ @@ -71,6 +74,7 @@ enum thermal_genl_event { THERMAL_GENL_EVENT_CDEV_DELETE, /* Cdev unbound */ THERMAL_GENL_EVENT_CDEV_STATE_UPDATE, /* Cdev state updated */ THERMAL_GENL_EVENT_TZ_GOV_CHANGE, /* Governor policy changed */ + THERMAL_GENL_EVENT_CPU_CAPABILITY_CHANGE, /* CPU capability changed */ __THERMAL_GENL_EVENT_MAX, }; #define THERMAL_GENL_EVENT_MAX (__THERMAL_GENL_EVENT_MAX - 1) diff --git a/linux-headers/include/linux/tipc_config.h b/linux-headers/include/linux/tipc_config.h index 25b9b2445f2..219dfd3f263 100644 --- a/linux-headers/include/linux/tipc_config.h +++ b/linux-headers/include/linux/tipc_config.h @@ -43,8 +43,6 @@ #include #include -#include /* for ntohs etc. */ - /* * Configuration * @@ -267,33 +265,33 @@ static __inline__ int TLV_OK(const void *tlv, __u16 space) */ return (space >= TLV_SPACE(0)) && - (ntohs(((struct tlv_desc *)tlv)->tlv_len) <= space); + (__be16_to_cpu(((struct tlv_desc *)tlv)->tlv_len) <= space); } static __inline__ int TLV_CHECK(const void *tlv, __u16 space, __u16 exp_type) { return TLV_OK(tlv, space) && - (ntohs(((struct tlv_desc *)tlv)->tlv_type) == exp_type); + (__be16_to_cpu(((struct tlv_desc *)tlv)->tlv_type) == exp_type); } static __inline__ int TLV_GET_LEN(struct tlv_desc *tlv) { - return ntohs(tlv->tlv_len); + return __be16_to_cpu(tlv->tlv_len); } static __inline__ void TLV_SET_LEN(struct tlv_desc *tlv, __u16 len) { - tlv->tlv_len = htons(len); + tlv->tlv_len = __cpu_to_be16(len); } static __inline__ int TLV_CHECK_TYPE(struct tlv_desc *tlv, __u16 type) { - return (ntohs(tlv->tlv_type) == type); + return (__be16_to_cpu(tlv->tlv_type) == type); } static __inline__ void TLV_SET_TYPE(struct tlv_desc *tlv, __u16 type) { - tlv->tlv_type = htons(type); + tlv->tlv_type = __cpu_to_be16(type); } static __inline__ int TLV_SET(void *tlv, __u16 type, void *data, __u16 len) @@ -303,8 +301,8 @@ static __inline__ int TLV_SET(void *tlv, __u16 type, void *data, __u16 len) tlv_len = TLV_LENGTH(len); tlv_ptr = (struct tlv_desc *)tlv; - tlv_ptr->tlv_type = htons(type); - tlv_ptr->tlv_len = htons(tlv_len); + tlv_ptr->tlv_type = __cpu_to_be16(type); + tlv_ptr->tlv_len = __cpu_to_be16(tlv_len); if (len && data) { memcpy(TLV_DATA(tlv_ptr), data, len); memset((char *)TLV_DATA(tlv_ptr) + len, 0, TLV_SPACE(len) - tlv_len); @@ -346,7 +344,7 @@ static __inline__ void *TLV_LIST_DATA(struct tlv_list_desc *list) static __inline__ void TLV_LIST_STEP(struct tlv_list_desc *list) { - __u16 tlv_space = TLV_ALIGN(ntohs(list->tlv_ptr->tlv_len)); + __u16 tlv_space = TLV_ALIGN(__be16_to_cpu(list->tlv_ptr->tlv_len)); list->tlv_ptr = (struct tlv_desc *)((char *)list->tlv_ptr + tlv_space); list->tlv_space -= tlv_space; @@ -402,9 +400,9 @@ static __inline__ int TCM_SET(void *msg, __u16 cmd, __u16 flags, msg_len = TCM_LENGTH(data_len); tcm_hdr = (struct tipc_cfg_msg_hdr *)msg; - tcm_hdr->tcm_len = htonl(msg_len); - tcm_hdr->tcm_type = htons(cmd); - tcm_hdr->tcm_flags = htons(flags); + tcm_hdr->tcm_len = __cpu_to_be32(msg_len); + tcm_hdr->tcm_type = __cpu_to_be16(cmd); + tcm_hdr->tcm_flags = __cpu_to_be16(flags); if (data_len && data) { memcpy(TCM_DATA(msg), data, data_len); memset((char *)TCM_DATA(msg) + data_len, 0, TCM_SPACE(data_len) - msg_len); diff --git a/linux-headers/include/linux/tls.h b/linux-headers/include/linux/tls.h index 3b675400446..dd7dea898f2 100644 --- a/linux-headers/include/linux/tls.h +++ b/linux-headers/include/linux/tls.h @@ -39,6 +39,8 @@ /* TLS socket options */ #define TLS_TX 1 /* Set transmit parameters */ #define TLS_RX 2 /* Set receive parameters */ +#define TLS_TX_ZEROCOPY_RO 3 /* TX zerocopy (only sendfile now) */ +#define TLS_RX_EXPECT_NO_PAD 4 /* Attempt opportunistic zero-copy */ /* Supported versions */ #define TLS_VERSION_MINOR(ver) ((ver) & 0xFF) @@ -77,6 +79,41 @@ #define TLS_CIPHER_AES_CCM_128_TAG_SIZE 16 #define TLS_CIPHER_AES_CCM_128_REC_SEQ_SIZE 8 +#define TLS_CIPHER_CHACHA20_POLY1305 54 +#define TLS_CIPHER_CHACHA20_POLY1305_IV_SIZE 12 +#define TLS_CIPHER_CHACHA20_POLY1305_KEY_SIZE 32 +#define TLS_CIPHER_CHACHA20_POLY1305_SALT_SIZE 0 +#define TLS_CIPHER_CHACHA20_POLY1305_TAG_SIZE 16 +#define TLS_CIPHER_CHACHA20_POLY1305_REC_SEQ_SIZE 8 + +#define TLS_CIPHER_SM4_GCM 55 +#define TLS_CIPHER_SM4_GCM_IV_SIZE 8 +#define TLS_CIPHER_SM4_GCM_KEY_SIZE 16 +#define TLS_CIPHER_SM4_GCM_SALT_SIZE 4 +#define TLS_CIPHER_SM4_GCM_TAG_SIZE 16 +#define TLS_CIPHER_SM4_GCM_REC_SEQ_SIZE 8 + +#define TLS_CIPHER_SM4_CCM 56 +#define TLS_CIPHER_SM4_CCM_IV_SIZE 8 +#define TLS_CIPHER_SM4_CCM_KEY_SIZE 16 +#define TLS_CIPHER_SM4_CCM_SALT_SIZE 4 +#define TLS_CIPHER_SM4_CCM_TAG_SIZE 16 +#define TLS_CIPHER_SM4_CCM_REC_SEQ_SIZE 8 + +#define TLS_CIPHER_ARIA_GCM_128 57 +#define TLS_CIPHER_ARIA_GCM_128_IV_SIZE 8 +#define TLS_CIPHER_ARIA_GCM_128_KEY_SIZE 16 +#define TLS_CIPHER_ARIA_GCM_128_SALT_SIZE 4 +#define TLS_CIPHER_ARIA_GCM_128_TAG_SIZE 16 +#define TLS_CIPHER_ARIA_GCM_128_REC_SEQ_SIZE 8 + +#define TLS_CIPHER_ARIA_GCM_256 58 +#define TLS_CIPHER_ARIA_GCM_256_IV_SIZE 8 +#define TLS_CIPHER_ARIA_GCM_256_KEY_SIZE 32 +#define TLS_CIPHER_ARIA_GCM_256_SALT_SIZE 4 +#define TLS_CIPHER_ARIA_GCM_256_TAG_SIZE 16 +#define TLS_CIPHER_ARIA_GCM_256_REC_SEQ_SIZE 8 + #define TLS_SET_RECORD_TYPE 1 #define TLS_GET_RECORD_TYPE 2 @@ -109,12 +146,54 @@ struct tls12_crypto_info_aes_ccm_128 { unsigned char rec_seq[TLS_CIPHER_AES_CCM_128_REC_SEQ_SIZE]; }; +struct tls12_crypto_info_chacha20_poly1305 { + struct tls_crypto_info info; + unsigned char iv[TLS_CIPHER_CHACHA20_POLY1305_IV_SIZE]; + unsigned char key[TLS_CIPHER_CHACHA20_POLY1305_KEY_SIZE]; + unsigned char salt[TLS_CIPHER_CHACHA20_POLY1305_SALT_SIZE]; + unsigned char rec_seq[TLS_CIPHER_CHACHA20_POLY1305_REC_SEQ_SIZE]; +}; + +struct tls12_crypto_info_sm4_gcm { + struct tls_crypto_info info; + unsigned char iv[TLS_CIPHER_SM4_GCM_IV_SIZE]; + unsigned char key[TLS_CIPHER_SM4_GCM_KEY_SIZE]; + unsigned char salt[TLS_CIPHER_SM4_GCM_SALT_SIZE]; + unsigned char rec_seq[TLS_CIPHER_SM4_GCM_REC_SEQ_SIZE]; +}; + +struct tls12_crypto_info_sm4_ccm { + struct tls_crypto_info info; + unsigned char iv[TLS_CIPHER_SM4_CCM_IV_SIZE]; + unsigned char key[TLS_CIPHER_SM4_CCM_KEY_SIZE]; + unsigned char salt[TLS_CIPHER_SM4_CCM_SALT_SIZE]; + unsigned char rec_seq[TLS_CIPHER_SM4_CCM_REC_SEQ_SIZE]; +}; + +struct tls12_crypto_info_aria_gcm_128 { + struct tls_crypto_info info; + unsigned char iv[TLS_CIPHER_ARIA_GCM_128_IV_SIZE]; + unsigned char key[TLS_CIPHER_ARIA_GCM_128_KEY_SIZE]; + unsigned char salt[TLS_CIPHER_ARIA_GCM_128_SALT_SIZE]; + unsigned char rec_seq[TLS_CIPHER_ARIA_GCM_128_REC_SEQ_SIZE]; +}; + +struct tls12_crypto_info_aria_gcm_256 { + struct tls_crypto_info info; + unsigned char iv[TLS_CIPHER_ARIA_GCM_256_IV_SIZE]; + unsigned char key[TLS_CIPHER_ARIA_GCM_256_KEY_SIZE]; + unsigned char salt[TLS_CIPHER_ARIA_GCM_256_SALT_SIZE]; + unsigned char rec_seq[TLS_CIPHER_ARIA_GCM_256_REC_SEQ_SIZE]; +}; + enum { TLS_INFO_UNSPEC, TLS_INFO_VERSION, TLS_INFO_CIPHER, TLS_INFO_TXCONF, TLS_INFO_RXCONF, + TLS_INFO_ZC_RO_TX, + TLS_INFO_RX_NO_PAD, __TLS_INFO_MAX, }; #define TLS_INFO_MAX (__TLS_INFO_MAX - 1) diff --git a/linux-headers/include/linux/tps6594_pfsm.h b/linux-headers/include/linux/tps6594_pfsm.h new file mode 100644 index 00000000000..c69569e0a7a --- /dev/null +++ b/linux-headers/include/linux/tps6594_pfsm.h @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Userspace ABI for TPS6594 PMIC Pre-configurable Finite State Machine + * + * Copyright (C) 2023 BayLibre Incorporated - https://www.baylibre.com/ + */ + +#ifndef __TPS6594_PFSM_H +#define __TPS6594_PFSM_H + +#include +#include +#include + +/** + * struct pmic_state_opt - PMIC state options + * @gpio_retention: if enabled, power rails associated with GPIO retention remain active + * @ddr_retention: if enabled, power rails associated with DDR retention remain active + * @mcu_only_startup_dest: if enabled, startup destination state is MCU_ONLY + */ +struct pmic_state_opt { + __u8 gpio_retention; + __u8 ddr_retention; + __u8 mcu_only_startup_dest; +}; + +/* Commands */ +#define PMIC_BASE 'P' + +#define PMIC_GOTO_STANDBY _IO(PMIC_BASE, 0) +#define PMIC_GOTO_LP_STANDBY _IO(PMIC_BASE, 1) +#define PMIC_UPDATE_PGM _IO(PMIC_BASE, 2) +#define PMIC_SET_ACTIVE_STATE _IO(PMIC_BASE, 3) +#define PMIC_SET_MCU_ONLY_STATE _IOW(PMIC_BASE, 4, struct pmic_state_opt) +#define PMIC_SET_RETENTION_STATE _IOW(PMIC_BASE, 5, struct pmic_state_opt) + +#endif /* __TPS6594_PFSM_H */ diff --git a/linux-headers/include/linux/tty.h b/linux-headers/include/linux/tty.h index deacd328fc9..015ab3d00c1 100644 --- a/linux-headers/include/linux/tty.h +++ b/linux-headers/include/linux/tty.h @@ -6,8 +6,6 @@ * 'tty.h' defines some structures used by tty_io.c and some defines. */ -#define NR_LDISCS 30 - /* line disciplines */ #define N_TTY 0 #define N_SLIP 1 @@ -38,5 +36,11 @@ #define N_NCI 25 /* NFC NCI UART */ #define N_SPEAKUP 26 /* Speakup communication with synths */ #define N_NULL 27 /* Null ldisc used for error handling */ +#define N_MCTP 28 /* MCTP-over-serial */ +#define N_DEVELOPMENT 29 /* Manual out-of-tree testing */ +#define N_CAN327 30 /* ELM327 based OBD-II interfaces */ + +/* Always the newest line discipline + 1 */ +#define NR_LDISCS 31 #endif /* _LINUX_TTY_H */ diff --git a/linux-headers/include/linux/tty_flags.h b/linux-headers/include/linux/tty_flags.h index 900a32e6342..5d22877a456 100644 --- a/linux-headers/include/linux/tty_flags.h +++ b/linux-headers/include/linux/tty_flags.h @@ -39,7 +39,6 @@ * WARNING: These flags are no longer used and have been superceded by the * TTY_PORT_ flags in the iflags field (and not userspace-visible) */ -#ifndef _KERNEL_ #define ASYNCB_INITIALIZED 31 /* Serial port was initialized */ #define ASYNCB_SUSPENDED 30 /* Serial port is suspended */ #define ASYNCB_NORMAL_ACTIVE 29 /* Normal device is active */ @@ -50,7 +49,6 @@ #define ASYNCB_SHARE_IRQ 24 /* for multifunction cards, no longer used */ #define ASYNCB_CONS_FLOW 23 /* flow control for console */ #define ASYNCB_FIRST_KERNEL 22 -#endif /* Masks */ #define ASYNC_HUP_NOTIFY (1U << ASYNCB_HUP_NOTIFY) @@ -73,15 +71,14 @@ #define ASYNC_MAGIC_MULTIPLIER (1U << ASYNCB_MAGIC_MULTIPLIER) #define ASYNC_FLAGS ((1U << (ASYNCB_LAST_USER + 1)) - 1) -#define ASYNC_DEPRECATED (ASYNC_SESSION_LOCKOUT | ASYNC_PGRP_LOCKOUT | \ - ASYNC_CALLOUT_NOHUP | ASYNC_AUTOPROBE) +#define ASYNC_DEPRECATED (ASYNC_SPLIT_TERMIOS | ASYNC_SESSION_LOCKOUT | \ + ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP | ASYNC_AUTOPROBE) #define ASYNC_USR_MASK (ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \ ASYNC_LOW_LATENCY) #define ASYNC_SPD_CUST (ASYNC_SPD_HI|ASYNC_SPD_VHI) #define ASYNC_SPD_WARP (ASYNC_SPD_HI|ASYNC_SPD_SHI) #define ASYNC_SPD_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI) -#ifndef _KERNEL_ /* These flags are no longer used (and were always masked from userspace) */ #define ASYNC_INITIALIZED (1U << ASYNCB_INITIALIZED) #define ASYNC_NORMAL_ACTIVE (1U << ASYNCB_NORMAL_ACTIVE) @@ -92,6 +89,5 @@ #define ASYNC_SHARE_IRQ (1U << ASYNCB_SHARE_IRQ) #define ASYNC_CONS_FLOW (1U << ASYNCB_CONS_FLOW) #define ASYNC_INTERNAL_FLAGS (~((1U << ASYNCB_FIRST_KERNEL) - 1)) -#endif #endif diff --git a/linux-headers/include/linux/types.h b/linux-headers/include/linux/types.h index 999cb0fa88e..e6700138c20 100644 --- a/linux-headers/include/linux/types.h +++ b/linux-headers/include/linux/types.h @@ -8,18 +8,25 @@ #include +#ifdef __SIZEOF_INT128__ +typedef __signed__ __int128 __s128 __attribute__((aligned(16))); +typedef unsigned __int128 __u128 __attribute__((aligned(16))); +#endif /* * Below are truly Linux-specific types that should never collide with * any application/library that wants linux/types.h. */ +/* sparse defines __CHECKER__; see Documentation/dev-tools/sparse.rst */ #ifdef __CHECKER__ -#define __bitwise__ __attribute__((bitwise)) +#define __bitwise __attribute__((bitwise)) #else -#define __bitwise__ +#define __bitwise #endif -#define __bitwise __bitwise__ + +/* The kernel doesn't use this legacy form, but user space does */ +#define __bitwise__ __bitwise typedef __u16 __bitwise __le16; typedef __u16 __bitwise __be16; diff --git a/linux-headers/include/linux/ublk_cmd.h b/linux-headers/include/linux/ublk_cmd.h new file mode 100644 index 00000000000..4643fc56303 --- /dev/null +++ b/linux-headers/include/linux/ublk_cmd.h @@ -0,0 +1,398 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef USER_BLK_DRV_CMD_INC_H +#define USER_BLK_DRV_CMD_INC_H + +#include + +/* ublk server command definition */ + +/* + * Admin commands, issued by ublk server, and handled by ublk driver. + * + * Legacy command definition, don't use in new application, and don't + * add new such definition any more + */ +#define UBLK_CMD_GET_QUEUE_AFFINITY 0x01 +#define UBLK_CMD_GET_DEV_INFO 0x02 +#define UBLK_CMD_ADD_DEV 0x04 +#define UBLK_CMD_DEL_DEV 0x05 +#define UBLK_CMD_START_DEV 0x06 +#define UBLK_CMD_STOP_DEV 0x07 +#define UBLK_CMD_SET_PARAMS 0x08 +#define UBLK_CMD_GET_PARAMS 0x09 +#define UBLK_CMD_START_USER_RECOVERY 0x10 +#define UBLK_CMD_END_USER_RECOVERY 0x11 +#define UBLK_CMD_GET_DEV_INFO2 0x12 + +/* Any new ctrl command should encode by __IO*() */ +#define UBLK_U_CMD_GET_QUEUE_AFFINITY \ + _IOR('u', UBLK_CMD_GET_QUEUE_AFFINITY, struct ublksrv_ctrl_cmd) +#define UBLK_U_CMD_GET_DEV_INFO \ + _IOR('u', UBLK_CMD_GET_DEV_INFO, struct ublksrv_ctrl_cmd) +#define UBLK_U_CMD_ADD_DEV \ + _IOWR('u', UBLK_CMD_ADD_DEV, struct ublksrv_ctrl_cmd) +#define UBLK_U_CMD_DEL_DEV \ + _IOWR('u', UBLK_CMD_DEL_DEV, struct ublksrv_ctrl_cmd) +#define UBLK_U_CMD_START_DEV \ + _IOWR('u', UBLK_CMD_START_DEV, struct ublksrv_ctrl_cmd) +#define UBLK_U_CMD_STOP_DEV \ + _IOWR('u', UBLK_CMD_STOP_DEV, struct ublksrv_ctrl_cmd) +#define UBLK_U_CMD_SET_PARAMS \ + _IOWR('u', UBLK_CMD_SET_PARAMS, struct ublksrv_ctrl_cmd) +#define UBLK_U_CMD_GET_PARAMS \ + _IOR('u', UBLK_CMD_GET_PARAMS, struct ublksrv_ctrl_cmd) +#define UBLK_U_CMD_START_USER_RECOVERY \ + _IOWR('u', UBLK_CMD_START_USER_RECOVERY, struct ublksrv_ctrl_cmd) +#define UBLK_U_CMD_END_USER_RECOVERY \ + _IOWR('u', UBLK_CMD_END_USER_RECOVERY, struct ublksrv_ctrl_cmd) +#define UBLK_U_CMD_GET_DEV_INFO2 \ + _IOR('u', UBLK_CMD_GET_DEV_INFO2, struct ublksrv_ctrl_cmd) +#define UBLK_U_CMD_GET_FEATURES \ + _IOR('u', 0x13, struct ublksrv_ctrl_cmd) + +/* + * 64bits are enough now, and it should be easy to extend in case of + * running out of feature flags + */ +#define UBLK_FEATURES_LEN 8 + +/* + * IO commands, issued by ublk server, and handled by ublk driver. + * + * FETCH_REQ: issued via sqe(URING_CMD) beforehand for fetching IO request + * from ublk driver, should be issued only when starting device. After + * the associated cqe is returned, request's tag can be retrieved via + * cqe->userdata. + * + * COMMIT_AND_FETCH_REQ: issued via sqe(URING_CMD) after ublkserver handled + * this IO request, request's handling result is committed to ublk + * driver, meantime FETCH_REQ is piggyback, and FETCH_REQ has to be + * handled before completing io request. + * + * NEED_GET_DATA: only used for write requests to set io addr and copy data + * When NEED_GET_DATA is set, ublksrv has to issue UBLK_IO_NEED_GET_DATA + * command after ublk driver returns UBLK_IO_RES_NEED_GET_DATA. + * + * It is only used if ublksrv set UBLK_F_NEED_GET_DATA flag + * while starting a ublk device. + */ + +/* + * Legacy IO command definition, don't use in new application, and don't + * add new such definition any more + */ +#define UBLK_IO_FETCH_REQ 0x20 +#define UBLK_IO_COMMIT_AND_FETCH_REQ 0x21 +#define UBLK_IO_NEED_GET_DATA 0x22 + +/* Any new IO command should encode by __IOWR() */ +#define UBLK_U_IO_FETCH_REQ \ + _IOWR('u', UBLK_IO_FETCH_REQ, struct ublksrv_io_cmd) +#define UBLK_U_IO_COMMIT_AND_FETCH_REQ \ + _IOWR('u', UBLK_IO_COMMIT_AND_FETCH_REQ, struct ublksrv_io_cmd) +#define UBLK_U_IO_NEED_GET_DATA \ + _IOWR('u', UBLK_IO_NEED_GET_DATA, struct ublksrv_io_cmd) + +/* only ABORT means that no re-fetch */ +#define UBLK_IO_RES_OK 0 +#define UBLK_IO_RES_NEED_GET_DATA 1 +#define UBLK_IO_RES_ABORT (-ENODEV) + +#define UBLKSRV_CMD_BUF_OFFSET 0 +#define UBLKSRV_IO_BUF_OFFSET 0x80000000 + +/* tag bit is 16bit, so far limit at most 4096 IOs for each queue */ +#define UBLK_MAX_QUEUE_DEPTH 4096 + +/* single IO buffer max size is 32MB */ +#define UBLK_IO_BUF_OFF 0 +#define UBLK_IO_BUF_BITS 25 +#define UBLK_IO_BUF_BITS_MASK ((1ULL << UBLK_IO_BUF_BITS) - 1) + +/* so at most 64K IOs for each queue */ +#define UBLK_TAG_OFF UBLK_IO_BUF_BITS +#define UBLK_TAG_BITS 16 +#define UBLK_TAG_BITS_MASK ((1ULL << UBLK_TAG_BITS) - 1) + +/* max 4096 queues */ +#define UBLK_QID_OFF (UBLK_TAG_OFF + UBLK_TAG_BITS) +#define UBLK_QID_BITS 12 +#define UBLK_QID_BITS_MASK ((1ULL << UBLK_QID_BITS) - 1) + +#define UBLK_MAX_NR_QUEUES (1U << UBLK_QID_BITS) + +#define UBLKSRV_IO_BUF_TOTAL_BITS (UBLK_QID_OFF + UBLK_QID_BITS) +#define UBLKSRV_IO_BUF_TOTAL_SIZE (1ULL << UBLKSRV_IO_BUF_TOTAL_BITS) + +/* + * zero copy requires 4k block size, and can remap ublk driver's io + * request into ublksrv's vm space + */ +#define UBLK_F_SUPPORT_ZERO_COPY (1ULL << 0) + +/* + * Force to complete io cmd via io_uring_cmd_complete_in_task so that + * performance comparison is done easily with using task_work_add + */ +#define UBLK_F_URING_CMD_COMP_IN_TASK (1ULL << 1) + +/* + * User should issue io cmd again for write requests to + * set io buffer address and copy data from bio vectors + * to the userspace io buffer. + * + * In this mode, task_work is not used. + */ +#define UBLK_F_NEED_GET_DATA (1UL << 2) + +#define UBLK_F_USER_RECOVERY (1UL << 3) + +#define UBLK_F_USER_RECOVERY_REISSUE (1UL << 4) + +/* + * Unprivileged user can create /dev/ublkcN and /dev/ublkbN. + * + * /dev/ublk-control needs to be available for unprivileged user, and it + * can be done via udev rule to make all control commands available to + * unprivileged user. Except for the command of UBLK_CMD_ADD_DEV, all + * other commands are only allowed for the owner of the specified device. + * + * When userspace sends UBLK_CMD_ADD_DEV, the device pair's owner_uid and + * owner_gid are stored to ublksrv_ctrl_dev_info by kernel, so far only + * the current user's uid/gid is stored, that said owner of the created + * device is always the current user. + * + * We still need udev rule to apply OWNER/GROUP with the stored owner_uid + * and owner_gid. + * + * Then ublk server can be run as unprivileged user, and /dev/ublkbN can + * be accessed and managed by its owner represented by owner_uid/owner_gid. + */ +#define UBLK_F_UNPRIVILEGED_DEV (1UL << 5) + +/* use ioctl encoding for uring command */ +#define UBLK_F_CMD_IOCTL_ENCODE (1UL << 6) + +/* Copy between request and user buffer by pread()/pwrite() */ +#define UBLK_F_USER_COPY (1UL << 7) + +/* + * User space sets this flag when setting up the device to request zoned storage support. Kernel may + * deny the request by returning an error. + */ +#define UBLK_F_ZONED (1ULL << 8) + +/* device state */ +#define UBLK_S_DEV_DEAD 0 +#define UBLK_S_DEV_LIVE 1 +#define UBLK_S_DEV_QUIESCED 2 + +/* shipped via sqe->cmd of io_uring command */ +struct ublksrv_ctrl_cmd { + /* sent to which device, must be valid */ + __u32 dev_id; + + /* sent to which queue, must be -1 if the cmd isn't for queue */ + __u16 queue_id; + /* + * cmd specific buffer, can be IN or OUT. + */ + __u16 len; + __u64 addr; + + /* __inline__ data */ + __u64 data[1]; + + /* + * Used for UBLK_F_UNPRIVILEGED_DEV and UBLK_CMD_GET_DEV_INFO2 + * only, include null char + */ + __u16 dev_path_len; + __u16 pad; + __u32 reserved; +}; + +struct ublksrv_ctrl_dev_info { + __u16 nr_hw_queues; + __u16 queue_depth; + __u16 state; + __u16 pad0; + + __u32 max_io_buf_bytes; + __u32 dev_id; + + __s32 ublksrv_pid; + __u32 pad1; + + __u64 flags; + + /* For ublksrv internal use, invisible to ublk driver */ + __u64 ublksrv_flags; + + __u32 owner_uid; /* store by kernel */ + __u32 owner_gid; /* store by kernel */ + __u64 reserved1; + __u64 reserved2; +}; + +#define UBLK_IO_OP_READ 0 +#define UBLK_IO_OP_WRITE 1 +#define UBLK_IO_OP_FLUSH 2 +#define UBLK_IO_OP_DISCARD 3 +#define UBLK_IO_OP_WRITE_SAME 4 +#define UBLK_IO_OP_WRITE_ZEROES 5 +#define UBLK_IO_OP_ZONE_OPEN 10 +#define UBLK_IO_OP_ZONE_CLOSE 11 +#define UBLK_IO_OP_ZONE_FINISH 12 +#define UBLK_IO_OP_ZONE_APPEND 13 +#define UBLK_IO_OP_ZONE_RESET_ALL 14 +#define UBLK_IO_OP_ZONE_RESET 15 +/* + * Construct a zone report. The report request is carried in `struct + * ublksrv_io_desc`. The `start_sector` field must be the first sector of a zone + * and shall indicate the first zone of the report. The `nr_zones` shall + * indicate how many zones should be reported at most. The report shall be + * delivered as a `struct blk_zone` array. To report fewer zones than requested, + * zero the last entry of the returned array. + * + * Related definitions(blk_zone, blk_zone_cond, blk_zone_type, ...) in + * include/uapi/linux/blkzoned.h are part of ublk UAPI. + */ +#define UBLK_IO_OP_REPORT_ZONES 18 + +#define UBLK_IO_F_FAILFAST_DEV (1U << 8) +#define UBLK_IO_F_FAILFAST_TRANSPORT (1U << 9) +#define UBLK_IO_F_FAILFAST_DRIVER (1U << 10) +#define UBLK_IO_F_META (1U << 11) +#define UBLK_IO_F_FUA (1U << 13) +#define UBLK_IO_F_NOUNMAP (1U << 15) +#define UBLK_IO_F_SWAP (1U << 16) + +/* + * io cmd is described by this structure, and stored in share memory, indexed + * by request tag. + * + * The data is stored by ublk driver, and read by ublksrv after one fetch command + * returns. + */ +struct ublksrv_io_desc { + /* op: bit 0-7, flags: bit 8-31 */ + __u32 op_flags; + + union { + __u32 nr_sectors; + __u32 nr_zones; /* for UBLK_IO_OP_REPORT_ZONES */ + }; + + /* start sector for this io */ + __u64 start_sector; + + /* buffer address in ublksrv daemon vm space, from ublk driver */ + __u64 addr; +}; + +static __inline__ __u8 ublksrv_get_op(const struct ublksrv_io_desc *iod) +{ + return iod->op_flags & 0xff; +} + +static __inline__ __u32 ublksrv_get_flags(const struct ublksrv_io_desc *iod) +{ + return iod->op_flags >> 8; +} + +/* issued to ublk driver via /dev/ublkcN */ +struct ublksrv_io_cmd { + __u16 q_id; + + /* for fetch/commit which result */ + __u16 tag; + + /* io result, it is valid for COMMIT* command only */ + __s32 result; + + union { + /* + * userspace buffer address in ublksrv daemon process, valid for + * FETCH* command only + * + * `addr` should not be used when UBLK_F_USER_COPY is enabled, + * because userspace handles data copy by pread()/pwrite() over + * /dev/ublkcN. But in case of UBLK_F_ZONED, this union is + * re-used to pass back the allocated LBA for + * UBLK_IO_OP_ZONE_APPEND which actually depends on + * UBLK_F_USER_COPY + */ + __u64 addr; + __u64 zone_append_lba; + }; +}; + +struct ublk_param_basic { +#define UBLK_ATTR_READ_ONLY (1 << 0) +#define UBLK_ATTR_ROTATIONAL (1 << 1) +#define UBLK_ATTR_VOLATILE_CACHE (1 << 2) +#define UBLK_ATTR_FUA (1 << 3) + __u32 attrs; + __u8 logical_bs_shift; + __u8 physical_bs_shift; + __u8 io_opt_shift; + __u8 io_min_shift; + + __u32 max_sectors; + __u32 chunk_sectors; + + __u64 dev_sectors; + __u64 virt_boundary_mask; +}; + +struct ublk_param_discard { + __u32 discard_alignment; + + __u32 discard_granularity; + __u32 max_discard_sectors; + + __u32 max_write_zeroes_sectors; + __u16 max_discard_segments; + __u16 reserved0; +}; + +/* + * read-only, can't set via UBLK_CMD_SET_PARAMS, disk_devt is available + * after device is started + */ +struct ublk_param_devt { + __u32 char_major; + __u32 char_minor; + __u32 disk_major; + __u32 disk_minor; +}; + +struct ublk_param_zoned { + __u32 max_open_zones; + __u32 max_active_zones; + __u32 max_zone_append_sectors; + __u8 reserved[20]; +}; + +struct ublk_params { + /* + * Total length of parameters, userspace has to set 'len' for both + * SET_PARAMS and GET_PARAMS command, and driver may update len + * if two sides use different version of 'ublk_params', same with + * 'types' fields. + */ + __u32 len; +#define UBLK_PARAM_TYPE_BASIC (1 << 0) +#define UBLK_PARAM_TYPE_DISCARD (1 << 1) +#define UBLK_PARAM_TYPE_DEVT (1 << 2) +#define UBLK_PARAM_TYPE_ZONED (1 << 3) + __u32 types; /* types of parameter included */ + + struct ublk_param_basic basic; + struct ublk_param_discard discard; + struct ublk_param_devt devt; + struct ublk_param_zoned zoned; +}; + +#endif diff --git a/linux-headers/include/linux/usb/audio.h b/linux-headers/include/linux/usb/audio.h index 58dac50a96e..cf838d24f54 100644 --- a/linux-headers/include/linux/usb/audio.h +++ b/linux-headers/include/linux/usb/audio.h @@ -341,7 +341,7 @@ struct uac_feature_unit_descriptor { __u8 bUnitID; __u8 bSourceID; __u8 bControlSize; - __u8 bmaControls[0]; /* variable length */ + __u8 bmaControls[]; /* variable length */ } __attribute__((packed)); static __inline__ __u8 uac_feature_unit_iFeature(struct uac_feature_unit_descriptor *desc) diff --git a/linux-headers/include/linux/usb/cdc.h b/linux-headers/include/linux/usb/cdc.h index 6d61550959e..1924cf66544 100644 --- a/linux-headers/include/linux/usb/cdc.h +++ b/linux-headers/include/linux/usb/cdc.h @@ -171,7 +171,7 @@ struct usb_cdc_mdlm_detail_desc { /* type is associated with mdlm_desc.bGUID */ __u8 bGuidDescriptorType; - __u8 bDetailData[0]; + __u8 bDetailData[]; } __attribute__ ((packed)); /* "OBEX Control Model Functional Descriptor" */ @@ -271,6 +271,10 @@ struct usb_cdc_line_coding { __u8 bDataBits; } __attribute__ ((packed)); +/* Control Signal Bitmap Values from 6.2.14 SetControlLineState */ +#define USB_CDC_CTRL_DTR (1 << 0) +#define USB_CDC_CTRL_RTS (1 << 1) + /* table 62; bits in multicast filter */ #define USB_CDC_PACKET_TYPE_PROMISCUOUS (1 << 0) #define USB_CDC_PACKET_TYPE_ALL_MULTICAST (1 << 1) /* no filter */ @@ -302,6 +306,15 @@ struct usb_cdc_notification { __le16 wLength; } __attribute__ ((packed)); +/* UART State Bitmap Values from 6.3.5 SerialState */ +#define USB_CDC_SERIAL_STATE_DCD (1 << 0) +#define USB_CDC_SERIAL_STATE_DSR (1 << 1) +#define USB_CDC_SERIAL_STATE_BREAK (1 << 2) +#define USB_CDC_SERIAL_STATE_RING_SIGNAL (1 << 3) +#define USB_CDC_SERIAL_STATE_FRAMING (1 << 4) +#define USB_CDC_SERIAL_STATE_PARITY (1 << 5) +#define USB_CDC_SERIAL_STATE_OVERRUN (1 << 6) + struct usb_cdc_speed_change { __le32 DLBitRRate; /* contains the downlink bit rate (IN pipe) */ __le32 ULBitRate; /* contains the uplink bit rate (OUT pipe) */ @@ -379,7 +392,7 @@ struct usb_cdc_ncm_ndp16 { __le32 dwSignature; __le16 wLength; __le16 wNextNdpIndex; - struct usb_cdc_ncm_dpe16 dpe16[0]; + struct usb_cdc_ncm_dpe16 dpe16[]; } __attribute__ ((packed)); /* 32-bit NCM Datagram Pointer Entry */ @@ -395,7 +408,7 @@ struct usb_cdc_ncm_ndp32 { __le16 wReserved6; __le32 dwNextNdpIndex; __le32 dwReserved12; - struct usb_cdc_ncm_dpe32 dpe32[0]; + struct usb_cdc_ncm_dpe32 dpe32[]; } __attribute__ ((packed)); /* CDC NCM subclass 3.2.1 and 3.2.2 */ diff --git a/linux-headers/include/linux/usb/ch11.h b/linux-headers/include/linux/usb/ch11.h index fb0cd24c392..ce4c83f2e66 100644 --- a/linux-headers/include/linux/usb/ch11.h +++ b/linux-headers/include/linux/usb/ch11.h @@ -15,10 +15,8 @@ /* This is arbitrary. * From USB 2.0 spec Table 11-13, offset 7, a hub can * have up to 255 ports. The most yet reported is 10. - * - * Current Wireless USB host hardware (Intel i1480 for example) allows - * up to 22 devices to connect. Upcoming hardware might raise that - * limit. Because the arrays need to add a bit for hub status data, we + * Upcoming hardware might raise that limit. + * Because the arrays need to add a bit for hub status data, we * use 31, so plus one evens out to four bytes. */ #define USB_MAXCHILDREN 31 diff --git a/linux-headers/include/linux/usb/ch9.h b/linux-headers/include/linux/usb/ch9.h index 406ac6e07d2..bd6124cc0d7 100644 --- a/linux-headers/include/linux/usb/ch9.h +++ b/linux-headers/include/linux/usb/ch9.h @@ -3,7 +3,7 @@ * This file holds USB constants and structures that are needed for * USB device APIs. These are used by the USB device model, which is * defined in chapter 9 of the USB 2.0 specification and in the - * Wireless USB 1.0 (spread around). Linux has several APIs in C that + * Wireless USB 1.0 spec (now defunct). Linux has several APIs in C that * need these: * * - the master/host side Linux-USB kernel driver API; @@ -14,9 +14,6 @@ * act either as a USB master/host or as a USB slave/device. That means * the master and slave side APIs benefit from working well together. * - * There's also "Wireless USB", using low power short range radios for - * peripheral interconnection but otherwise building on the USB framework. - * * Note all descriptors are declared '__attribute__((packed))' so that: * * [a] they never get padded, either internally (USB spec writers @@ -376,7 +373,10 @@ struct usb_string_descriptor { __u8 bLength; __u8 bDescriptorType; - __le16 wData[1]; /* UTF-16LE encoded */ + union { + __le16 legacy_padding; + __DECLARE_FLEX_ARRAY(__le16, wData); /* UTF-16LE encoded */ + }; } __attribute__ ((packed)); /* note that "string" zero is special, it holds language codes that @@ -818,7 +818,7 @@ struct usb_key_descriptor { __u8 tTKID[3]; __u8 bReserved; - __u8 bKeyData[0]; + __u8 bKeyData[]; } __attribute__((packed)); /*-------------------------------------------------------------------------*/ @@ -947,6 +947,22 @@ struct usb_ss_container_id_descriptor { #define USB_DT_USB_SS_CONTN_ID_SIZE 20 +/* + * Platform Device Capability descriptor: Defines platform specific device + * capabilities + */ +#define USB_PLAT_DEV_CAP_TYPE 5 +struct usb_plat_dev_cap_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + __u8 bReserved; + __u8 UUID[16]; + __u8 CapabilityData[]; +} __attribute__((packed)); + +#define USB_DT_USB_PLAT_DEV_CAP_SIZE(capability_data_size) (20 + capability_data_size) + /* * SuperSpeed Plus USB Capability descriptor: Defines the set of * SuperSpeed Plus USB specific device level capabilities @@ -965,12 +981,29 @@ struct usb_ssp_cap_descriptor { #define USB_SSP_MIN_RX_LANE_COUNT (0xf << 8) #define USB_SSP_MIN_TX_LANE_COUNT (0xf << 12) __le16 wReserved; - __le32 bmSublinkSpeedAttr[1]; /* list of sublink speed attrib entries */ + union { + __le32 legacy_padding; + /* list of sublink speed attrib entries */ + __DECLARE_FLEX_ARRAY(__le32, bmSublinkSpeedAttr); + }; #define USB_SSP_SUBLINK_SPEED_SSID (0xf) /* sublink speed ID */ #define USB_SSP_SUBLINK_SPEED_LSE (0x3 << 4) /* Lanespeed exponent */ +#define USB_SSP_SUBLINK_SPEED_LSE_BPS 0 +#define USB_SSP_SUBLINK_SPEED_LSE_KBPS 1 +#define USB_SSP_SUBLINK_SPEED_LSE_MBPS 2 +#define USB_SSP_SUBLINK_SPEED_LSE_GBPS 3 + #define USB_SSP_SUBLINK_SPEED_ST (0x3 << 6) /* Sublink type */ +#define USB_SSP_SUBLINK_SPEED_ST_SYM_RX 0 +#define USB_SSP_SUBLINK_SPEED_ST_ASYM_RX 1 +#define USB_SSP_SUBLINK_SPEED_ST_SYM_TX 2 +#define USB_SSP_SUBLINK_SPEED_ST_ASYM_TX 3 + #define USB_SSP_SUBLINK_SPEED_RSVD (0x3f << 8) /* Reserved */ #define USB_SSP_SUBLINK_SPEED_LP (0x3 << 14) /* Link protocol */ +#define USB_SSP_SUBLINK_SPEED_LP_SS 0 +#define USB_SSP_SUBLINK_SPEED_LP_SSP 1 + #define USB_SSP_SUBLINK_SPEED_LSM (0xff << 16) /* Lanespeed mantissa */ } __attribute__((packed)); diff --git a/linux-headers/include/linux/usb/g_uvc.h b/linux-headers/include/linux/usb/g_uvc.h index 652f169a019..8d7824dde1b 100644 --- a/linux-headers/include/linux/usb/g_uvc.h +++ b/linux-headers/include/linux/usb/g_uvc.h @@ -21,6 +21,9 @@ #define UVC_EVENT_DATA (V4L2_EVENT_PRIVATE_START + 5) #define UVC_EVENT_LAST (V4L2_EVENT_PRIVATE_START + 5) +#define UVC_STRING_CONTROL_IDX 0 +#define UVC_STRING_STREAMING_IDX 1 + struct uvc_request_data { __s32 length; __u8 data[60]; diff --git a/linux-headers/include/linux/usb/raw_gadget.h b/linux-headers/include/linux/usb/raw_gadget.h index 7abaf4b518a..c74bbfc90b7 100644 --- a/linux-headers/include/linux/usb/raw_gadget.h +++ b/linux-headers/include/linux/usb/raw_gadget.h @@ -60,7 +60,7 @@ enum usb_raw_event_type { struct usb_raw_event { __u32 type; __u32 length; - __u8 data[0]; + __u8 data[]; }; #define USB_RAW_IO_FLAGS_ZERO 0x0001 @@ -90,7 +90,7 @@ struct usb_raw_ep_io { __u16 ep; __u16 flags; __u32 length; - __u8 data[0]; + __u8 data[]; }; /* Maximum number of non-control endpoints in struct usb_raw_eps_info. */ diff --git a/linux-headers/include/linux/usb/tmc.h b/linux-headers/include/linux/usb/tmc.h index cdf2f47c085..f87a1715ac2 100644 --- a/linux-headers/include/linux/usb/tmc.h +++ b/linux-headers/include/linux/usb/tmc.h @@ -102,6 +102,9 @@ struct usbtmc_message { #define USBTMC_IOCTL_MSG_IN_ATTR _IOR(USBTMC_IOC_NR, 24, __u8) #define USBTMC_IOCTL_AUTO_ABORT _IOW(USBTMC_IOC_NR, 25, __u8) +#define USBTMC_IOCTL_GET_STB _IOR(USBTMC_IOC_NR, 26, __u8) +#define USBTMC_IOCTL_GET_SRQ_STB _IOR(USBTMC_IOC_NR, 27, __u8) + /* Cancel and cleanup asynchronous calls */ #define USBTMC_IOCTL_CANCEL_IO _IO(USBTMC_IOC_NR, 35) #define USBTMC_IOCTL_CLEANUP_IO _IO(USBTMC_IOC_NR, 36) diff --git a/linux-headers/include/linux/usb/video.h b/linux-headers/include/linux/usb/video.h index d854cb19c42..2ff0e8a3a68 100644 --- a/linux-headers/include/linux/usb/video.h +++ b/linux-headers/include/linux/usb/video.h @@ -179,6 +179,36 @@ #define UVC_CONTROL_CAP_AUTOUPDATE (1 << 3) #define UVC_CONTROL_CAP_ASYNCHRONOUS (1 << 4) +/* 3.9.2.6 Color Matching Descriptor Values */ +enum uvc_color_primaries_values { + UVC_COLOR_PRIMARIES_UNSPECIFIED, + UVC_COLOR_PRIMARIES_BT_709_SRGB, + UVC_COLOR_PRIMARIES_BT_470_2_M, + UVC_COLOR_PRIMARIES_BT_470_2_B_G, + UVC_COLOR_PRIMARIES_SMPTE_170M, + UVC_COLOR_PRIMARIES_SMPTE_240M, +}; + +enum uvc_transfer_characteristics_values { + UVC_TRANSFER_CHARACTERISTICS_UNSPECIFIED, + UVC_TRANSFER_CHARACTERISTICS_BT_709, + UVC_TRANSFER_CHARACTERISTICS_BT_470_2_M, + UVC_TRANSFER_CHARACTERISTICS_BT_470_2_B_G, + UVC_TRANSFER_CHARACTERISTICS_SMPTE_170M, + UVC_TRANSFER_CHARACTERISTICS_SMPTE_240M, + UVC_TRANSFER_CHARACTERISTICS_LINEAR, + UVC_TRANSFER_CHARACTERISTICS_SRGB, +}; + +enum uvc_matrix_coefficients { + UVC_MATRIX_COEFFICIENTS_UNSPECIFIED, + UVC_MATRIX_COEFFICIENTS_BT_709, + UVC_MATRIX_COEFFICIENTS_FCC, + UVC_MATRIX_COEFFICIENTS_BT_470_2_B_G, + UVC_MATRIX_COEFFICIENTS_SMPTE_170M, + UVC_MATRIX_COEFFICIENTS_SMPTE_240M, +}; + /* ------------------------------------------------------------------------ * UVC structures */ @@ -302,9 +332,10 @@ struct uvc_processing_unit_descriptor { __u8 bControlSize; __u8 bmControls[2]; __u8 iProcessing; + __u8 bmVideoStandards; } __attribute__((__packed__)); -#define UVC_DT_PROCESSING_UNIT_SIZE(n) (9+(n)) +#define UVC_DT_PROCESSING_UNIT_SIZE(n) (10+(n)) /* 3.7.2.6. Extension Unit Descriptor */ struct uvc_extension_unit_descriptor { @@ -465,7 +496,7 @@ struct uvc_format_uncompressed { __u8 bDefaultFrameIndex; __u8 bAspectRatioX; __u8 bAspectRatioY; - __u8 bmInterfaceFlags; + __u8 bmInterlaceFlags; __u8 bCopyProtect; } __attribute__((__packed__)); @@ -521,7 +552,7 @@ struct uvc_format_mjpeg { __u8 bDefaultFrameIndex; __u8 bAspectRatioX; __u8 bAspectRatioY; - __u8 bmInterfaceFlags; + __u8 bmInterlaceFlags; __u8 bCopyProtect; } __attribute__((__packed__)); diff --git a/linux-headers/include/linux/usbdevice_fs.h b/linux-headers/include/linux/usbdevice_fs.h index eaa77e4032e..c6b3469f841 100644 --- a/linux-headers/include/linux/usbdevice_fs.h +++ b/linux-headers/include/linux/usbdevice_fs.h @@ -131,7 +131,7 @@ struct usbdevfs_urb { unsigned int signr; /* signal to be sent on completion, or 0 if none should be sent. */ void *usercontext; - struct usbdevfs_iso_packet_desc iso_frame_desc[0]; + struct usbdevfs_iso_packet_desc iso_frame_desc[]; }; /* ioctls for talking directly to drivers */ @@ -176,7 +176,7 @@ struct usbdevfs_disconnect_claim { struct usbdevfs_streams { unsigned int num_streams; /* Not used by USBDEVFS_FREE_STREAMS */ unsigned int num_eps; - unsigned char eps[0]; + unsigned char eps[]; }; /* diff --git a/linux-headers/include/linux/usbip.h b/linux-headers/include/linux/usbip.h index 5b2ab66a3e2..5fb59395211 100644 --- a/linux-headers/include/linux/usbip.h +++ b/linux-headers/include/linux/usbip.h @@ -24,4 +24,30 @@ enum usbip_device_status { VDEV_ST_USED, VDEV_ST_ERROR }; + +/* USB URB Transfer flags: + * + * USBIP server and client (vchi) pack URBs in TCP packets. The following + * are the transfer type defines used in USBIP protocol. + */ + +#define USBIP_URB_SHORT_NOT_OK 0x0001 +#define USBIP_URB_ISO_ASAP 0x0002 +#define USBIP_URB_NO_TRANSFER_DMA_MAP 0x0004 +#define USBIP_URB_ZERO_PACKET 0x0040 +#define USBIP_URB_NO_INTERRUPT 0x0080 +#define USBIP_URB_FREE_BUFFER 0x0100 +#define USBIP_URB_DIR_IN 0x0200 +#define USBIP_URB_DIR_OUT 0 +#define USBIP_URB_DIR_MASK USBIP_URB_DIR_IN + +#define USBIP_URB_DMA_MAP_SINGLE 0x00010000 +#define USBIP_URB_DMA_MAP_PAGE 0x00020000 +#define USBIP_URB_DMA_MAP_SG 0x00040000 +#define USBIP_URB_MAP_LOCAL 0x00080000 +#define USBIP_URB_SETUP_MAP_SINGLE 0x00100000 +#define USBIP_URB_SETUP_MAP_LOCAL 0x00200000 +#define USBIP_URB_DMA_SG_COMBINED 0x00400000 +#define USBIP_URB_ALIGNED_TEMP_BUFFER 0x00800000 + #endif /* _LINUX_USBIP_H */ diff --git a/linux-headers/include/linux/user_events.h b/linux-headers/include/linux/user_events.h new file mode 100644 index 00000000000..d73e575b84e --- /dev/null +++ b/linux-headers/include/linux/user_events.h @@ -0,0 +1,81 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Copyright (c) 2021-2022, Microsoft Corporation. + * + * Authors: + * Beau Belgrave + */ +#ifndef _LINUX_USER_EVENTS_H +#define _LINUX_USER_EVENTS_H + +#include +#include + +#define USER_EVENTS_SYSTEM "user_events" +#define USER_EVENTS_PREFIX "u:" + +/* Create dynamic location entry within a 32-bit value */ +#define DYN_LOC(offset, size) ((size) << 16 | (offset)) + +/* + * Describes an event registration and stores the results of the registration. + * This structure is passed to the DIAG_IOCSREG ioctl, callers at a minimum + * must set the size and name_args before invocation. + */ +struct user_reg { + + /* Input: Size of the user_reg structure being used */ + __u32 size; + + /* Input: Bit in enable address to use */ + __u8 enable_bit; + + /* Input: Enable size in bytes at address */ + __u8 enable_size; + + /* Input: Flags for future use, set to 0 */ + __u16 flags; + + /* Input: Address to update when enabled */ + __u64 enable_addr; + + /* Input: Pointer to string with event name, description and flags */ + __u64 name_args; + + /* Output: Index of the event to use when writing data */ + __u32 write_index; +} __attribute__((__packed__)); + +/* + * Describes an event unregister, callers must set the size, address and bit. + * This structure is passed to the DIAG_IOCSUNREG ioctl to disable bit updates. + */ +struct user_unreg { + /* Input: Size of the user_unreg structure being used */ + __u32 size; + + /* Input: Bit to unregister */ + __u8 disable_bit; + + /* Input: Reserved, set to 0 */ + __u8 __reserved; + + /* Input: Reserved, set to 0 */ + __u16 __reserved2; + + /* Input: Address to unregister */ + __u64 disable_addr; +} __attribute__((__packed__)); + +#define DIAG_IOC_MAGIC '*' + +/* Request to register a user_event */ +#define DIAG_IOCSREG _IOWR(DIAG_IOC_MAGIC, 0, struct user_reg *) + +/* Request to delete a user_event */ +#define DIAG_IOCSDEL _IOW(DIAG_IOC_MAGIC, 1, char *) + +/* Requests to unregister a user_event */ +#define DIAG_IOCSUNREG _IOW(DIAG_IOC_MAGIC, 2, struct user_unreg*) + +#endif /* _LINUX_USER_EVENTS_H */ diff --git a/linux-headers/include/linux/userfaultfd.h b/linux-headers/include/linux/userfaultfd.h index 8d3996eb828..59978fbaae3 100644 --- a/linux-headers/include/linux/userfaultfd.h +++ b/linux-headers/include/linux/userfaultfd.h @@ -12,6 +12,10 @@ #include +/* ioctls for /dev/userfaultfd */ +#define USERFAULTFD_IOC 0xAA +#define USERFAULTFD_IOC_NEW _IO(USERFAULTFD_IOC, 0x00) + /* * If the UFFDIO_API is upgraded someday, the UFFDIO_UNREGISTER and * UFFDIO_WAKE ioctls should be defined as _IOW and not as _IOR. In @@ -19,15 +23,24 @@ * means the userland is reading). */ #define UFFD_API ((__u64)0xAA) +#define UFFD_API_REGISTER_MODES (UFFDIO_REGISTER_MODE_MISSING | \ + UFFDIO_REGISTER_MODE_WP | \ + UFFDIO_REGISTER_MODE_MINOR) #define UFFD_API_FEATURES (UFFD_FEATURE_PAGEFAULT_FLAG_WP | \ UFFD_FEATURE_EVENT_FORK | \ UFFD_FEATURE_EVENT_REMAP | \ - UFFD_FEATURE_EVENT_REMOVE | \ + UFFD_FEATURE_EVENT_REMOVE | \ UFFD_FEATURE_EVENT_UNMAP | \ UFFD_FEATURE_MISSING_HUGETLBFS | \ UFFD_FEATURE_MISSING_SHMEM | \ UFFD_FEATURE_SIGBUS | \ - UFFD_FEATURE_THREAD_ID) + UFFD_FEATURE_THREAD_ID | \ + UFFD_FEATURE_MINOR_HUGETLBFS | \ + UFFD_FEATURE_MINOR_SHMEM | \ + UFFD_FEATURE_EXACT_ADDRESS | \ + UFFD_FEATURE_WP_HUGETLBFS_SHMEM | \ + UFFD_FEATURE_WP_UNPOPULATED | \ + UFFD_FEATURE_POISON) #define UFFD_API_IOCTLS \ ((__u64)1 << _UFFDIO_REGISTER | \ (__u64)1 << _UFFDIO_UNREGISTER | \ @@ -36,10 +49,15 @@ ((__u64)1 << _UFFDIO_WAKE | \ (__u64)1 << _UFFDIO_COPY | \ (__u64)1 << _UFFDIO_ZEROPAGE | \ - (__u64)1 << _UFFDIO_WRITEPROTECT) + (__u64)1 << _UFFDIO_WRITEPROTECT | \ + (__u64)1 << _UFFDIO_CONTINUE | \ + (__u64)1 << _UFFDIO_POISON) #define UFFD_API_RANGE_IOCTLS_BASIC \ ((__u64)1 << _UFFDIO_WAKE | \ - (__u64)1 << _UFFDIO_COPY) + (__u64)1 << _UFFDIO_COPY | \ + (__u64)1 << _UFFDIO_WRITEPROTECT | \ + (__u64)1 << _UFFDIO_CONTINUE | \ + (__u64)1 << _UFFDIO_POISON) /* * Valid ioctl command number range with this API is from 0x00 to @@ -55,6 +73,8 @@ #define _UFFDIO_COPY (0x03) #define _UFFDIO_ZEROPAGE (0x04) #define _UFFDIO_WRITEPROTECT (0x06) +#define _UFFDIO_CONTINUE (0x07) +#define _UFFDIO_POISON (0x08) #define _UFFDIO_API (0x3F) /* userfaultfd ioctl ids */ @@ -73,6 +93,10 @@ struct uffdio_zeropage) #define UFFDIO_WRITEPROTECT _IOWR(UFFDIO, _UFFDIO_WRITEPROTECT, \ struct uffdio_writeprotect) +#define UFFDIO_CONTINUE _IOWR(UFFDIO, _UFFDIO_CONTINUE, \ + struct uffdio_continue) +#define UFFDIO_POISON _IOWR(UFFDIO, _UFFDIO_POISON, \ + struct uffdio_poison) /* read() structure */ struct uffd_msg { @@ -127,6 +151,7 @@ struct uffd_msg { /* flags for UFFD_EVENT_PAGEFAULT */ #define UFFD_PAGEFAULT_FLAG_WRITE (1<<0) /* If this was a write fault */ #define UFFD_PAGEFAULT_FLAG_WP (1<<1) /* If reason is VM_UFFD_WP */ +#define UFFD_PAGEFAULT_FLAG_MINOR (1<<2) /* If reason is VM_UFFD_MINOR */ struct uffdio_api { /* userland asks for an API number and the features to enable */ @@ -171,6 +196,26 @@ struct uffdio_api { * * UFFD_FEATURE_THREAD_ID pid of the page faulted task_struct will * be returned, if feature is not requested 0 will be returned. + * + * UFFD_FEATURE_MINOR_HUGETLBFS indicates that minor faults + * can be intercepted (via REGISTER_MODE_MINOR) for + * hugetlbfs-backed pages. + * + * UFFD_FEATURE_MINOR_SHMEM indicates the same support as + * UFFD_FEATURE_MINOR_HUGETLBFS, but for shmem-backed pages instead. + * + * UFFD_FEATURE_EXACT_ADDRESS indicates that the exact address of page + * faults would be provided and the offset within the page would not be + * masked. + * + * UFFD_FEATURE_WP_HUGETLBFS_SHMEM indicates that userfaultfd + * write-protection mode is supported on both shmem and hugetlbfs. + * + * UFFD_FEATURE_WP_UNPOPULATED indicates that userfaultfd + * write-protection mode will always apply to unpopulated pages + * (i.e. empty ptes). This will be the default behavior for shmem + * & hugetlbfs, so this flag only affects anonymous memory behavior + * when userfault write-protection mode is registered. */ #define UFFD_FEATURE_PAGEFAULT_FLAG_WP (1<<0) #define UFFD_FEATURE_EVENT_FORK (1<<1) @@ -181,6 +226,12 @@ struct uffdio_api { #define UFFD_FEATURE_EVENT_UNMAP (1<<6) #define UFFD_FEATURE_SIGBUS (1<<7) #define UFFD_FEATURE_THREAD_ID (1<<8) +#define UFFD_FEATURE_MINOR_HUGETLBFS (1<<9) +#define UFFD_FEATURE_MINOR_SHMEM (1<<10) +#define UFFD_FEATURE_EXACT_ADDRESS (1<<11) +#define UFFD_FEATURE_WP_HUGETLBFS_SHMEM (1<<12) +#define UFFD_FEATURE_WP_UNPOPULATED (1<<13) +#define UFFD_FEATURE_POISON (1<<14) __u64 features; __u64 ioctls; @@ -195,6 +246,7 @@ struct uffdio_register { struct uffdio_range range; #define UFFDIO_REGISTER_MODE_MISSING ((__u64)1<<0) #define UFFDIO_REGISTER_MODE_WP ((__u64)1<<1) +#define UFFDIO_REGISTER_MODE_MINOR ((__u64)1<<2) __u64 mode; /* @@ -257,4 +309,44 @@ struct uffdio_writeprotect { __u64 mode; }; +struct uffdio_continue { + struct uffdio_range range; +#define UFFDIO_CONTINUE_MODE_DONTWAKE ((__u64)1<<0) + /* + * UFFDIO_CONTINUE_MODE_WP will map the page write protected on + * the fly. UFFDIO_CONTINUE_MODE_WP is available only if the + * write protected ioctl is implemented for the range + * according to the uffdio_register.ioctls. + */ +#define UFFDIO_CONTINUE_MODE_WP ((__u64)1<<1) + __u64 mode; + + /* + * Fields below here are written by the ioctl and must be at the end: + * the copy_from_user will not read past here. + */ + __s64 mapped; +}; + +struct uffdio_poison { + struct uffdio_range range; +#define UFFDIO_POISON_MODE_DONTWAKE ((__u64)1<<0) + __u64 mode; + + /* + * Fields below here are written by the ioctl and must be at the end: + * the copy_from_user will not read past here. + */ + __s64 updated; +}; + +/* + * Flags for the userfaultfd(2) system call itself. + */ + +/* + * Create a userfaultfd that can handle page faults only in user mode. + */ +#define UFFD_USER_MODE_ONLY 1 + #endif /* _LINUX_USERFAULTFD_H */ diff --git a/linux-headers/include/linux/uuid.h b/linux-headers/include/linux/uuid.h index 03f84fd1295..8443738f4bb 100644 --- a/linux-headers/include/linux/uuid.h +++ b/linux-headers/include/linux/uuid.h @@ -1,42 +1 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * UUID/GUID definition - * - * Copyright (C) 2010, Intel Corp. - * Huang Ying - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation; - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _LINUX_UUID_H_ -#define _LINUX_UUID_H_ - -#include - -typedef struct { - __u8 b[16]; -} guid_t; - -#define GUID_INIT(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) \ -((guid_t) \ -{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \ - (b) & 0xff, ((b) >> 8) & 0xff, \ - (c) & 0xff, ((c) >> 8) & 0xff, \ - (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }}) - -/* backwards compatibility, don't use in new code */ -typedef guid_t uuid_le; -#define UUID_LE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) \ - GUID_INIT(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) -#define NULL_UUID_LE \ - UUID_LE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00, \ - 0x00, 0x00, 0x00, 0x00) - -#endif /* _LINUX_UUID_H_ */ +#include diff --git a/linux-headers/include/linux/uvcvideo.h b/linux-headers/include/linux/uvcvideo.h index cae851b3bb6..88720fcf014 100644 --- a/linux-headers/include/linux/uvcvideo.h +++ b/linux-headers/include/linux/uvcvideo.h @@ -36,9 +36,11 @@ UVC_CTRL_FLAG_GET_MAX | UVC_CTRL_FLAG_GET_RES | \ UVC_CTRL_FLAG_GET_DEF) +#define UVC_MENU_NAME_LEN 32 + struct uvc_menu_info { __u32 value; - __u8 name[32]; + __u8 name[UVC_MENU_NAME_LEN]; }; struct uvc_xu_control_mapping { @@ -76,17 +78,17 @@ struct uvc_xu_control_query { /** * struct uvc_meta_buf - metadata buffer building block - * @ns - system timestamp of the payload in nanoseconds - * @sof - USB Frame Number - * @length - length of the payload header - * @flags - payload header flags - * @buf - optional device-specific header data + * @ns: system timestamp of the payload in nanoseconds + * @sof: USB Frame Number + * @length: length of the payload header + * @flags: payload header flags + * @buf: optional device-specific header data * * UVC metadata nodes fill buffers with possibly multiple instances of this * struct. The first two fields are added by the driver, they can be used for * clock synchronisation. The rest is an exact copy of a UVC payload header. * Only complete objects with complete buffers are included. Therefore it's - * always sizeof(meta->ts) + sizeof(meta->sof) + meta->length bytes large. + * always sizeof(meta->ns) + sizeof(meta->sof) + meta->length bytes large. */ struct uvc_meta_buf { __u64 ns; diff --git a/linux-headers/include/linux/v4l2-common.h b/linux-headers/include/linux/v4l2-common.h index 14de1731b39..c3ca11e3e2e 100644 --- a/linux-headers/include/linux/v4l2-common.h +++ b/linux-headers/include/linux/v4l2-common.h @@ -10,45 +10,6 @@ * * Copyright (C) 2012 Nokia Corporation * Contact: Sakari Ailus - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Alternatively you can redistribute this file under the terms of the - * BSD license as stated below: - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. The names of its contributors may not be used to endorse or promote - * products derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED - * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * */ #ifndef __V4L2_COMMON__ diff --git a/linux-headers/include/linux/v4l2-controls.h b/linux-headers/include/linux/v4l2-controls.h index bc9829d6a47..63516691cec 100644 --- a/linux-headers/include/linux/v4l2-controls.h +++ b/linux-headers/include/linux/v4l2-controls.h @@ -4,44 +4,6 @@ * * Copyright (C) 1999-2012 the contributors * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Alternatively you can redistribute this file under the terms of the - * BSD license as stated below: - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. The names of its contributors may not be used to endorse or promote - * products derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED - * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * * The contents of this header was split off from videodev2.h. All control * definitions should be added to this header, which is included by * videodev2.h. @@ -50,11 +12,12 @@ #ifndef __LINUX_V4L2_CONTROLS_H #define __LINUX_V4L2_CONTROLS_H +#include #include /* Control classes */ #define V4L2_CTRL_CLASS_USER 0x00980000 /* Old-style 'user' controls */ -#define V4L2_CTRL_CLASS_MPEG 0x00990000 /* MPEG-compression controls */ +#define V4L2_CTRL_CLASS_CODEC 0x00990000 /* Stateful codec controls */ #define V4L2_CTRL_CLASS_CAMERA 0x009a0000 /* Camera class controls */ #define V4L2_CTRL_CLASS_FM_TX 0x009b0000 /* FM Modulator controls */ #define V4L2_CTRL_CLASS_FLASH 0x009c0000 /* Camera flash controls */ @@ -65,6 +28,8 @@ #define V4L2_CTRL_CLASS_FM_RX 0x00a10000 /* FM Receiver controls */ #define V4L2_CTRL_CLASS_RF_TUNER 0x00a20000 /* RF tuner controls */ #define V4L2_CTRL_CLASS_DETECT 0x00a30000 /* Detection controls */ +#define V4L2_CTRL_CLASS_CODEC_STATELESS 0x00a40000 /* Stateless codecs controls */ +#define V4L2_CTRL_CLASS_COLORIMETRY 0x00a50000 /* Colorimetry controls */ /* User-class control IDs */ @@ -125,6 +90,7 @@ enum v4l2_colorfx { V4L2_COLORFX_SOLARIZATION = 13, V4L2_COLORFX_ANTIQUE = 14, V4L2_COLORFX_SET_CBCR = 15, + V4L2_COLORFX_SET_RGB = 16, }; #define V4L2_CID_AUTOBRIGHTNESS (V4L2_CID_BASE+32) #define V4L2_CID_BAND_STOP_FILTER (V4L2_CID_BASE+33) @@ -142,14 +108,17 @@ enum v4l2_colorfx { #define V4L2_CID_ALPHA_COMPONENT (V4L2_CID_BASE+41) #define V4L2_CID_COLORFX_CBCR (V4L2_CID_BASE+42) +#define V4L2_CID_COLORFX_RGB (V4L2_CID_BASE+43) /* last CID + 1 */ -#define V4L2_CID_LASTP1 (V4L2_CID_BASE+43) +#define V4L2_CID_LASTP1 (V4L2_CID_BASE+44) /* USER-class private control IDs */ -/* The base for the meye driver controls. See linux/meye.h for the list - * of controls. We reserve 16 controls for this driver. */ +/* + * The base for the meye driver controls. This driver was removed, but + * we keep this define in case any software still uses it. + */ #define V4L2_CID_USER_MEYE_BASE (V4L2_CID_USER_BASE + 0x1000) /* The base for the bttv driver controls. @@ -198,15 +167,49 @@ enum v4l2_colorfx { */ #define V4L2_CID_USER_ATMEL_ISC_BASE (V4L2_CID_USER_BASE + 0x10c0) +/* + * The base for the CODA driver controls. + * We reserve 16 controls for this driver. + */ +#define V4L2_CID_USER_CODA_BASE (V4L2_CID_USER_BASE + 0x10e0) +/* + * The base for MIPI CCS driver controls. + * We reserve 128 controls for this driver. + */ +#define V4L2_CID_USER_CCS_BASE (V4L2_CID_USER_BASE + 0x10f0) +/* + * The base for Allegro driver controls. + * We reserve 16 controls for this driver. + */ +#define V4L2_CID_USER_ALLEGRO_BASE (V4L2_CID_USER_BASE + 0x1170) + +/* + * The base for the isl7998x driver controls. + * We reserve 16 controls for this driver. + */ +#define V4L2_CID_USER_ISL7998X_BASE (V4L2_CID_USER_BASE + 0x1180) + +/* + * The base for DW100 driver controls. + * We reserve 16 controls for this driver. + */ +#define V4L2_CID_USER_DW100_BASE (V4L2_CID_USER_BASE + 0x1190) + +/* + * The base for Aspeed driver controls. + * We reserve 16 controls for this driver. + */ +#define V4L2_CID_USER_ASPEED_BASE (V4L2_CID_USER_BASE + 0x11a0) + /* MPEG-class control IDs */ /* The MPEG controls are applicable to all codec controls * and the 'MPEG' part of the define is historical */ -#define V4L2_CID_MPEG_BASE (V4L2_CTRL_CLASS_MPEG | 0x900) -#define V4L2_CID_MPEG_CLASS (V4L2_CTRL_CLASS_MPEG | 1) +#define V4L2_CID_CODEC_BASE (V4L2_CTRL_CLASS_CODEC | 0x900) +#define V4L2_CID_CODEC_CLASS (V4L2_CTRL_CLASS_CODEC | 1) /* MPEG streams, specific to multiplexed streams */ -#define V4L2_CID_MPEG_STREAM_TYPE (V4L2_CID_MPEG_BASE+0) +#define V4L2_CID_MPEG_STREAM_TYPE (V4L2_CID_CODEC_BASE+0) enum v4l2_mpeg_stream_type { V4L2_MPEG_STREAM_TYPE_MPEG2_PS = 0, /* MPEG-2 program stream */ V4L2_MPEG_STREAM_TYPE_MPEG2_TS = 1, /* MPEG-2 transport stream */ @@ -215,26 +218,26 @@ enum v4l2_mpeg_stream_type { V4L2_MPEG_STREAM_TYPE_MPEG1_VCD = 4, /* MPEG-1 VCD-compatible stream */ V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD = 5, /* MPEG-2 SVCD-compatible stream */ }; -#define V4L2_CID_MPEG_STREAM_PID_PMT (V4L2_CID_MPEG_BASE+1) -#define V4L2_CID_MPEG_STREAM_PID_AUDIO (V4L2_CID_MPEG_BASE+2) -#define V4L2_CID_MPEG_STREAM_PID_VIDEO (V4L2_CID_MPEG_BASE+3) -#define V4L2_CID_MPEG_STREAM_PID_PCR (V4L2_CID_MPEG_BASE+4) -#define V4L2_CID_MPEG_STREAM_PES_ID_AUDIO (V4L2_CID_MPEG_BASE+5) -#define V4L2_CID_MPEG_STREAM_PES_ID_VIDEO (V4L2_CID_MPEG_BASE+6) -#define V4L2_CID_MPEG_STREAM_VBI_FMT (V4L2_CID_MPEG_BASE+7) +#define V4L2_CID_MPEG_STREAM_PID_PMT (V4L2_CID_CODEC_BASE+1) +#define V4L2_CID_MPEG_STREAM_PID_AUDIO (V4L2_CID_CODEC_BASE+2) +#define V4L2_CID_MPEG_STREAM_PID_VIDEO (V4L2_CID_CODEC_BASE+3) +#define V4L2_CID_MPEG_STREAM_PID_PCR (V4L2_CID_CODEC_BASE+4) +#define V4L2_CID_MPEG_STREAM_PES_ID_AUDIO (V4L2_CID_CODEC_BASE+5) +#define V4L2_CID_MPEG_STREAM_PES_ID_VIDEO (V4L2_CID_CODEC_BASE+6) +#define V4L2_CID_MPEG_STREAM_VBI_FMT (V4L2_CID_CODEC_BASE+7) enum v4l2_mpeg_stream_vbi_fmt { V4L2_MPEG_STREAM_VBI_FMT_NONE = 0, /* No VBI in the MPEG stream */ V4L2_MPEG_STREAM_VBI_FMT_IVTV = 1, /* VBI in private packets, IVTV format */ }; /* MPEG audio controls specific to multiplexed streams */ -#define V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ (V4L2_CID_MPEG_BASE+100) +#define V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ (V4L2_CID_CODEC_BASE+100) enum v4l2_mpeg_audio_sampling_freq { V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100 = 0, V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000 = 1, V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000 = 2, }; -#define V4L2_CID_MPEG_AUDIO_ENCODING (V4L2_CID_MPEG_BASE+101) +#define V4L2_CID_MPEG_AUDIO_ENCODING (V4L2_CID_CODEC_BASE+101) enum v4l2_mpeg_audio_encoding { V4L2_MPEG_AUDIO_ENCODING_LAYER_1 = 0, V4L2_MPEG_AUDIO_ENCODING_LAYER_2 = 1, @@ -242,7 +245,7 @@ enum v4l2_mpeg_audio_encoding { V4L2_MPEG_AUDIO_ENCODING_AAC = 3, V4L2_MPEG_AUDIO_ENCODING_AC3 = 4, }; -#define V4L2_CID_MPEG_AUDIO_L1_BITRATE (V4L2_CID_MPEG_BASE+102) +#define V4L2_CID_MPEG_AUDIO_L1_BITRATE (V4L2_CID_CODEC_BASE+102) enum v4l2_mpeg_audio_l1_bitrate { V4L2_MPEG_AUDIO_L1_BITRATE_32K = 0, V4L2_MPEG_AUDIO_L1_BITRATE_64K = 1, @@ -259,7 +262,7 @@ enum v4l2_mpeg_audio_l1_bitrate { V4L2_MPEG_AUDIO_L1_BITRATE_416K = 12, V4L2_MPEG_AUDIO_L1_BITRATE_448K = 13, }; -#define V4L2_CID_MPEG_AUDIO_L2_BITRATE (V4L2_CID_MPEG_BASE+103) +#define V4L2_CID_MPEG_AUDIO_L2_BITRATE (V4L2_CID_CODEC_BASE+103) enum v4l2_mpeg_audio_l2_bitrate { V4L2_MPEG_AUDIO_L2_BITRATE_32K = 0, V4L2_MPEG_AUDIO_L2_BITRATE_48K = 1, @@ -276,7 +279,7 @@ enum v4l2_mpeg_audio_l2_bitrate { V4L2_MPEG_AUDIO_L2_BITRATE_320K = 12, V4L2_MPEG_AUDIO_L2_BITRATE_384K = 13, }; -#define V4L2_CID_MPEG_AUDIO_L3_BITRATE (V4L2_CID_MPEG_BASE+104) +#define V4L2_CID_MPEG_AUDIO_L3_BITRATE (V4L2_CID_CODEC_BASE+104) enum v4l2_mpeg_audio_l3_bitrate { V4L2_MPEG_AUDIO_L3_BITRATE_32K = 0, V4L2_MPEG_AUDIO_L3_BITRATE_40K = 1, @@ -293,34 +296,34 @@ enum v4l2_mpeg_audio_l3_bitrate { V4L2_MPEG_AUDIO_L3_BITRATE_256K = 12, V4L2_MPEG_AUDIO_L3_BITRATE_320K = 13, }; -#define V4L2_CID_MPEG_AUDIO_MODE (V4L2_CID_MPEG_BASE+105) +#define V4L2_CID_MPEG_AUDIO_MODE (V4L2_CID_CODEC_BASE+105) enum v4l2_mpeg_audio_mode { V4L2_MPEG_AUDIO_MODE_STEREO = 0, V4L2_MPEG_AUDIO_MODE_JOINT_STEREO = 1, V4L2_MPEG_AUDIO_MODE_DUAL = 2, V4L2_MPEG_AUDIO_MODE_MONO = 3, }; -#define V4L2_CID_MPEG_AUDIO_MODE_EXTENSION (V4L2_CID_MPEG_BASE+106) +#define V4L2_CID_MPEG_AUDIO_MODE_EXTENSION (V4L2_CID_CODEC_BASE+106) enum v4l2_mpeg_audio_mode_extension { V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4 = 0, V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_8 = 1, V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_12 = 2, V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_16 = 3, }; -#define V4L2_CID_MPEG_AUDIO_EMPHASIS (V4L2_CID_MPEG_BASE+107) +#define V4L2_CID_MPEG_AUDIO_EMPHASIS (V4L2_CID_CODEC_BASE+107) enum v4l2_mpeg_audio_emphasis { V4L2_MPEG_AUDIO_EMPHASIS_NONE = 0, V4L2_MPEG_AUDIO_EMPHASIS_50_DIV_15_uS = 1, V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17 = 2, }; -#define V4L2_CID_MPEG_AUDIO_CRC (V4L2_CID_MPEG_BASE+108) +#define V4L2_CID_MPEG_AUDIO_CRC (V4L2_CID_CODEC_BASE+108) enum v4l2_mpeg_audio_crc { V4L2_MPEG_AUDIO_CRC_NONE = 0, V4L2_MPEG_AUDIO_CRC_CRC16 = 1, }; -#define V4L2_CID_MPEG_AUDIO_MUTE (V4L2_CID_MPEG_BASE+109) -#define V4L2_CID_MPEG_AUDIO_AAC_BITRATE (V4L2_CID_MPEG_BASE+110) -#define V4L2_CID_MPEG_AUDIO_AC3_BITRATE (V4L2_CID_MPEG_BASE+111) +#define V4L2_CID_MPEG_AUDIO_MUTE (V4L2_CID_CODEC_BASE+109) +#define V4L2_CID_MPEG_AUDIO_AAC_BITRATE (V4L2_CID_CODEC_BASE+110) +#define V4L2_CID_MPEG_AUDIO_AC3_BITRATE (V4L2_CID_CODEC_BASE+111) enum v4l2_mpeg_audio_ac3_bitrate { V4L2_MPEG_AUDIO_AC3_BITRATE_32K = 0, V4L2_MPEG_AUDIO_AC3_BITRATE_40K = 1, @@ -342,7 +345,7 @@ enum v4l2_mpeg_audio_ac3_bitrate { V4L2_MPEG_AUDIO_AC3_BITRATE_576K = 17, V4L2_MPEG_AUDIO_AC3_BITRATE_640K = 18, }; -#define V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK (V4L2_CID_MPEG_BASE+112) +#define V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK (V4L2_CID_CODEC_BASE+112) enum v4l2_mpeg_audio_dec_playback { V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO = 0, V4L2_MPEG_AUDIO_DEC_PLAYBACK_STEREO = 1, @@ -351,52 +354,52 @@ enum v4l2_mpeg_audio_dec_playback { V4L2_MPEG_AUDIO_DEC_PLAYBACK_MONO = 4, V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO = 5, }; -#define V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK (V4L2_CID_MPEG_BASE+113) +#define V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK (V4L2_CID_CODEC_BASE+113) /* MPEG video controls specific to multiplexed streams */ -#define V4L2_CID_MPEG_VIDEO_ENCODING (V4L2_CID_MPEG_BASE+200) +#define V4L2_CID_MPEG_VIDEO_ENCODING (V4L2_CID_CODEC_BASE+200) enum v4l2_mpeg_video_encoding { V4L2_MPEG_VIDEO_ENCODING_MPEG_1 = 0, V4L2_MPEG_VIDEO_ENCODING_MPEG_2 = 1, V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC = 2, }; -#define V4L2_CID_MPEG_VIDEO_ASPECT (V4L2_CID_MPEG_BASE+201) +#define V4L2_CID_MPEG_VIDEO_ASPECT (V4L2_CID_CODEC_BASE+201) enum v4l2_mpeg_video_aspect { V4L2_MPEG_VIDEO_ASPECT_1x1 = 0, V4L2_MPEG_VIDEO_ASPECT_4x3 = 1, V4L2_MPEG_VIDEO_ASPECT_16x9 = 2, V4L2_MPEG_VIDEO_ASPECT_221x100 = 3, }; -#define V4L2_CID_MPEG_VIDEO_B_FRAMES (V4L2_CID_MPEG_BASE+202) -#define V4L2_CID_MPEG_VIDEO_GOP_SIZE (V4L2_CID_MPEG_BASE+203) -#define V4L2_CID_MPEG_VIDEO_GOP_CLOSURE (V4L2_CID_MPEG_BASE+204) -#define V4L2_CID_MPEG_VIDEO_PULLDOWN (V4L2_CID_MPEG_BASE+205) -#define V4L2_CID_MPEG_VIDEO_BITRATE_MODE (V4L2_CID_MPEG_BASE+206) +#define V4L2_CID_MPEG_VIDEO_B_FRAMES (V4L2_CID_CODEC_BASE+202) +#define V4L2_CID_MPEG_VIDEO_GOP_SIZE (V4L2_CID_CODEC_BASE+203) +#define V4L2_CID_MPEG_VIDEO_GOP_CLOSURE (V4L2_CID_CODEC_BASE+204) +#define V4L2_CID_MPEG_VIDEO_PULLDOWN (V4L2_CID_CODEC_BASE+205) +#define V4L2_CID_MPEG_VIDEO_BITRATE_MODE (V4L2_CID_CODEC_BASE+206) enum v4l2_mpeg_video_bitrate_mode { V4L2_MPEG_VIDEO_BITRATE_MODE_VBR = 0, V4L2_MPEG_VIDEO_BITRATE_MODE_CBR = 1, V4L2_MPEG_VIDEO_BITRATE_MODE_CQ = 2, }; -#define V4L2_CID_MPEG_VIDEO_BITRATE (V4L2_CID_MPEG_BASE+207) -#define V4L2_CID_MPEG_VIDEO_BITRATE_PEAK (V4L2_CID_MPEG_BASE+208) -#define V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION (V4L2_CID_MPEG_BASE+209) -#define V4L2_CID_MPEG_VIDEO_MUTE (V4L2_CID_MPEG_BASE+210) -#define V4L2_CID_MPEG_VIDEO_MUTE_YUV (V4L2_CID_MPEG_BASE+211) -#define V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE (V4L2_CID_MPEG_BASE+212) -#define V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER (V4L2_CID_MPEG_BASE+213) -#define V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB (V4L2_CID_MPEG_BASE+214) -#define V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE (V4L2_CID_MPEG_BASE+215) -#define V4L2_CID_MPEG_VIDEO_HEADER_MODE (V4L2_CID_MPEG_BASE+216) +#define V4L2_CID_MPEG_VIDEO_BITRATE (V4L2_CID_CODEC_BASE+207) +#define V4L2_CID_MPEG_VIDEO_BITRATE_PEAK (V4L2_CID_CODEC_BASE+208) +#define V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION (V4L2_CID_CODEC_BASE+209) +#define V4L2_CID_MPEG_VIDEO_MUTE (V4L2_CID_CODEC_BASE+210) +#define V4L2_CID_MPEG_VIDEO_MUTE_YUV (V4L2_CID_CODEC_BASE+211) +#define V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE (V4L2_CID_CODEC_BASE+212) +#define V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER (V4L2_CID_CODEC_BASE+213) +#define V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB (V4L2_CID_CODEC_BASE+214) +#define V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE (V4L2_CID_CODEC_BASE+215) +#define V4L2_CID_MPEG_VIDEO_HEADER_MODE (V4L2_CID_CODEC_BASE+216) enum v4l2_mpeg_video_header_mode { V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE = 0, V4L2_MPEG_VIDEO_HEADER_MODE_JOINED_WITH_1ST_FRAME = 1, }; -#define V4L2_CID_MPEG_VIDEO_MAX_REF_PIC (V4L2_CID_MPEG_BASE+217) -#define V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE (V4L2_CID_MPEG_BASE+218) -#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES (V4L2_CID_MPEG_BASE+219) -#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB (V4L2_CID_MPEG_BASE+220) -#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE (V4L2_CID_MPEG_BASE+221) +#define V4L2_CID_MPEG_VIDEO_MAX_REF_PIC (V4L2_CID_CODEC_BASE+217) +#define V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE (V4L2_CID_CODEC_BASE+218) +#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES (V4L2_CID_CODEC_BASE+219) +#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB (V4L2_CID_CODEC_BASE+220) +#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE (V4L2_CID_CODEC_BASE+221) enum v4l2_mpeg_video_multi_slice_mode { V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE = 0, V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_MAX_MB = 1, @@ -405,24 +408,36 @@ enum v4l2_mpeg_video_multi_slice_mode { V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_MB = 1, V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_BYTES = 2, }; -#define V4L2_CID_MPEG_VIDEO_VBV_SIZE (V4L2_CID_MPEG_BASE+222) -#define V4L2_CID_MPEG_VIDEO_DEC_PTS (V4L2_CID_MPEG_BASE+223) -#define V4L2_CID_MPEG_VIDEO_DEC_FRAME (V4L2_CID_MPEG_BASE+224) -#define V4L2_CID_MPEG_VIDEO_VBV_DELAY (V4L2_CID_MPEG_BASE+225) -#define V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER (V4L2_CID_MPEG_BASE+226) -#define V4L2_CID_MPEG_VIDEO_MV_H_SEARCH_RANGE (V4L2_CID_MPEG_BASE+227) -#define V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE (V4L2_CID_MPEG_BASE+228) -#define V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME (V4L2_CID_MPEG_BASE+229) +#define V4L2_CID_MPEG_VIDEO_VBV_SIZE (V4L2_CID_CODEC_BASE+222) +#define V4L2_CID_MPEG_VIDEO_DEC_PTS (V4L2_CID_CODEC_BASE+223) +#define V4L2_CID_MPEG_VIDEO_DEC_FRAME (V4L2_CID_CODEC_BASE+224) +#define V4L2_CID_MPEG_VIDEO_VBV_DELAY (V4L2_CID_CODEC_BASE+225) +#define V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER (V4L2_CID_CODEC_BASE+226) +#define V4L2_CID_MPEG_VIDEO_MV_H_SEARCH_RANGE (V4L2_CID_CODEC_BASE+227) +#define V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE (V4L2_CID_CODEC_BASE+228) +#define V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME (V4L2_CID_CODEC_BASE+229) +#define V4L2_CID_MPEG_VIDEO_BASELAYER_PRIORITY_ID (V4L2_CID_CODEC_BASE+230) +#define V4L2_CID_MPEG_VIDEO_AU_DELIMITER (V4L2_CID_CODEC_BASE+231) +#define V4L2_CID_MPEG_VIDEO_LTR_COUNT (V4L2_CID_CODEC_BASE+232) +#define V4L2_CID_MPEG_VIDEO_FRAME_LTR_INDEX (V4L2_CID_CODEC_BASE+233) +#define V4L2_CID_MPEG_VIDEO_USE_LTR_FRAMES (V4L2_CID_CODEC_BASE+234) +#define V4L2_CID_MPEG_VIDEO_DEC_CONCEAL_COLOR (V4L2_CID_CODEC_BASE+235) +#define V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD (V4L2_CID_CODEC_BASE+236) +#define V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD_TYPE (V4L2_CID_CODEC_BASE+237) +enum v4l2_mpeg_video_intra_refresh_period_type { + V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD_TYPE_RANDOM = 0, + V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD_TYPE_CYCLIC = 1, +}; /* CIDs for the MPEG-2 Part 2 (H.262) codec */ -#define V4L2_CID_MPEG_VIDEO_MPEG2_LEVEL (V4L2_CID_MPEG_BASE+270) +#define V4L2_CID_MPEG_VIDEO_MPEG2_LEVEL (V4L2_CID_CODEC_BASE+270) enum v4l2_mpeg_video_mpeg2_level { V4L2_MPEG_VIDEO_MPEG2_LEVEL_LOW = 0, V4L2_MPEG_VIDEO_MPEG2_LEVEL_MAIN = 1, V4L2_MPEG_VIDEO_MPEG2_LEVEL_HIGH_1440 = 2, V4L2_MPEG_VIDEO_MPEG2_LEVEL_HIGH = 3, }; -#define V4L2_CID_MPEG_VIDEO_MPEG2_PROFILE (V4L2_CID_MPEG_BASE+271) +#define V4L2_CID_MPEG_VIDEO_MPEG2_PROFILE (V4L2_CID_CODEC_BASE+271) enum v4l2_mpeg_video_mpeg2_profile { V4L2_MPEG_VIDEO_MPEG2_PROFILE_SIMPLE = 0, V4L2_MPEG_VIDEO_MPEG2_PROFILE_MAIN = 1, @@ -433,28 +448,28 @@ enum v4l2_mpeg_video_mpeg2_profile { }; /* CIDs for the FWHT codec as used by the vicodec driver. */ -#define V4L2_CID_FWHT_I_FRAME_QP (V4L2_CID_MPEG_BASE + 290) -#define V4L2_CID_FWHT_P_FRAME_QP (V4L2_CID_MPEG_BASE + 291) - -#define V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP (V4L2_CID_MPEG_BASE+300) -#define V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP (V4L2_CID_MPEG_BASE+301) -#define V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP (V4L2_CID_MPEG_BASE+302) -#define V4L2_CID_MPEG_VIDEO_H263_MIN_QP (V4L2_CID_MPEG_BASE+303) -#define V4L2_CID_MPEG_VIDEO_H263_MAX_QP (V4L2_CID_MPEG_BASE+304) -#define V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP (V4L2_CID_MPEG_BASE+350) -#define V4L2_CID_MPEG_VIDEO_H264_P_FRAME_QP (V4L2_CID_MPEG_BASE+351) -#define V4L2_CID_MPEG_VIDEO_H264_B_FRAME_QP (V4L2_CID_MPEG_BASE+352) -#define V4L2_CID_MPEG_VIDEO_H264_MIN_QP (V4L2_CID_MPEG_BASE+353) -#define V4L2_CID_MPEG_VIDEO_H264_MAX_QP (V4L2_CID_MPEG_BASE+354) -#define V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM (V4L2_CID_MPEG_BASE+355) -#define V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE (V4L2_CID_MPEG_BASE+356) -#define V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE (V4L2_CID_MPEG_BASE+357) +#define V4L2_CID_FWHT_I_FRAME_QP (V4L2_CID_CODEC_BASE + 290) +#define V4L2_CID_FWHT_P_FRAME_QP (V4L2_CID_CODEC_BASE + 291) + +#define V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP (V4L2_CID_CODEC_BASE+300) +#define V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP (V4L2_CID_CODEC_BASE+301) +#define V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP (V4L2_CID_CODEC_BASE+302) +#define V4L2_CID_MPEG_VIDEO_H263_MIN_QP (V4L2_CID_CODEC_BASE+303) +#define V4L2_CID_MPEG_VIDEO_H263_MAX_QP (V4L2_CID_CODEC_BASE+304) +#define V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP (V4L2_CID_CODEC_BASE+350) +#define V4L2_CID_MPEG_VIDEO_H264_P_FRAME_QP (V4L2_CID_CODEC_BASE+351) +#define V4L2_CID_MPEG_VIDEO_H264_B_FRAME_QP (V4L2_CID_CODEC_BASE+352) +#define V4L2_CID_MPEG_VIDEO_H264_MIN_QP (V4L2_CID_CODEC_BASE+353) +#define V4L2_CID_MPEG_VIDEO_H264_MAX_QP (V4L2_CID_CODEC_BASE+354) +#define V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM (V4L2_CID_CODEC_BASE+355) +#define V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE (V4L2_CID_CODEC_BASE+356) +#define V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE (V4L2_CID_CODEC_BASE+357) enum v4l2_mpeg_video_h264_entropy_mode { V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CAVLC = 0, V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CABAC = 1, }; -#define V4L2_CID_MPEG_VIDEO_H264_I_PERIOD (V4L2_CID_MPEG_BASE+358) -#define V4L2_CID_MPEG_VIDEO_H264_LEVEL (V4L2_CID_MPEG_BASE+359) +#define V4L2_CID_MPEG_VIDEO_H264_I_PERIOD (V4L2_CID_CODEC_BASE+358) +#define V4L2_CID_MPEG_VIDEO_H264_LEVEL (V4L2_CID_CODEC_BASE+359) enum v4l2_mpeg_video_h264_level { V4L2_MPEG_VIDEO_H264_LEVEL_1_0 = 0, V4L2_MPEG_VIDEO_H264_LEVEL_1B = 1, @@ -477,15 +492,15 @@ enum v4l2_mpeg_video_h264_level { V4L2_MPEG_VIDEO_H264_LEVEL_6_1 = 18, V4L2_MPEG_VIDEO_H264_LEVEL_6_2 = 19, }; -#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA (V4L2_CID_MPEG_BASE+360) -#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA (V4L2_CID_MPEG_BASE+361) -#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE (V4L2_CID_MPEG_BASE+362) +#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA (V4L2_CID_CODEC_BASE+360) +#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA (V4L2_CID_CODEC_BASE+361) +#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE (V4L2_CID_CODEC_BASE+362) enum v4l2_mpeg_video_h264_loop_filter_mode { V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_ENABLED = 0, V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED = 1, V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY = 2, }; -#define V4L2_CID_MPEG_VIDEO_H264_PROFILE (V4L2_CID_MPEG_BASE+363) +#define V4L2_CID_MPEG_VIDEO_H264_PROFILE (V4L2_CID_CODEC_BASE+363) enum v4l2_mpeg_video_h264_profile { V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE = 0, V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE = 1, @@ -506,10 +521,10 @@ enum v4l2_mpeg_video_h264_profile { V4L2_MPEG_VIDEO_H264_PROFILE_MULTIVIEW_HIGH = 16, V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_HIGH = 17, }; -#define V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_HEIGHT (V4L2_CID_MPEG_BASE+364) -#define V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_WIDTH (V4L2_CID_MPEG_BASE+365) -#define V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE (V4L2_CID_MPEG_BASE+366) -#define V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC (V4L2_CID_MPEG_BASE+367) +#define V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_HEIGHT (V4L2_CID_CODEC_BASE+364) +#define V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_WIDTH (V4L2_CID_CODEC_BASE+365) +#define V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE (V4L2_CID_CODEC_BASE+366) +#define V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC (V4L2_CID_CODEC_BASE+367) enum v4l2_mpeg_video_h264_vui_sar_idc { V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED = 0, V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_1x1 = 1, @@ -530,9 +545,9 @@ enum v4l2_mpeg_video_h264_vui_sar_idc { V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_2x1 = 16, V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED = 17, }; -#define V4L2_CID_MPEG_VIDEO_H264_SEI_FRAME_PACKING (V4L2_CID_MPEG_BASE+368) -#define V4L2_CID_MPEG_VIDEO_H264_SEI_FP_CURRENT_FRAME_0 (V4L2_CID_MPEG_BASE+369) -#define V4L2_CID_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE (V4L2_CID_MPEG_BASE+370) +#define V4L2_CID_MPEG_VIDEO_H264_SEI_FRAME_PACKING (V4L2_CID_CODEC_BASE+368) +#define V4L2_CID_MPEG_VIDEO_H264_SEI_FP_CURRENT_FRAME_0 (V4L2_CID_CODEC_BASE+369) +#define V4L2_CID_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE (V4L2_CID_CODEC_BASE+370) enum v4l2_mpeg_video_h264_sei_fp_arrangement_type { V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_CHECKERBOARD = 0, V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_COLUMN = 1, @@ -541,8 +556,8 @@ enum v4l2_mpeg_video_h264_sei_fp_arrangement_type { V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TOP_BOTTOM = 4, V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TEMPORAL = 5, }; -#define V4L2_CID_MPEG_VIDEO_H264_FMO (V4L2_CID_MPEG_BASE+371) -#define V4L2_CID_MPEG_VIDEO_H264_FMO_MAP_TYPE (V4L2_CID_MPEG_BASE+372) +#define V4L2_CID_MPEG_VIDEO_H264_FMO (V4L2_CID_CODEC_BASE+371) +#define V4L2_CID_MPEG_VIDEO_H264_FMO_MAP_TYPE (V4L2_CID_CODEC_BASE+372) enum v4l2_mpeg_video_h264_fmo_map_type { V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_INTERLEAVED_SLICES = 0, V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_SCATTERED_SLICES = 1, @@ -552,36 +567,45 @@ enum v4l2_mpeg_video_h264_fmo_map_type { V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_WIPE_SCAN = 5, V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_EXPLICIT = 6, }; -#define V4L2_CID_MPEG_VIDEO_H264_FMO_SLICE_GROUP (V4L2_CID_MPEG_BASE+373) -#define V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_DIRECTION (V4L2_CID_MPEG_BASE+374) +#define V4L2_CID_MPEG_VIDEO_H264_FMO_SLICE_GROUP (V4L2_CID_CODEC_BASE+373) +#define V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_DIRECTION (V4L2_CID_CODEC_BASE+374) enum v4l2_mpeg_video_h264_fmo_change_dir { V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_RIGHT = 0, V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_LEFT = 1, }; -#define V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_RATE (V4L2_CID_MPEG_BASE+375) -#define V4L2_CID_MPEG_VIDEO_H264_FMO_RUN_LENGTH (V4L2_CID_MPEG_BASE+376) -#define V4L2_CID_MPEG_VIDEO_H264_ASO (V4L2_CID_MPEG_BASE+377) -#define V4L2_CID_MPEG_VIDEO_H264_ASO_SLICE_ORDER (V4L2_CID_MPEG_BASE+378) -#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING (V4L2_CID_MPEG_BASE+379) -#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_TYPE (V4L2_CID_MPEG_BASE+380) +#define V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_RATE (V4L2_CID_CODEC_BASE+375) +#define V4L2_CID_MPEG_VIDEO_H264_FMO_RUN_LENGTH (V4L2_CID_CODEC_BASE+376) +#define V4L2_CID_MPEG_VIDEO_H264_ASO (V4L2_CID_CODEC_BASE+377) +#define V4L2_CID_MPEG_VIDEO_H264_ASO_SLICE_ORDER (V4L2_CID_CODEC_BASE+378) +#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING (V4L2_CID_CODEC_BASE+379) +#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_TYPE (V4L2_CID_CODEC_BASE+380) enum v4l2_mpeg_video_h264_hierarchical_coding_type { V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_B = 0, V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_P = 1, }; -#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER (V4L2_CID_MPEG_BASE+381) -#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER_QP (V4L2_CID_MPEG_BASE+382) -#define V4L2_CID_MPEG_VIDEO_H264_CONSTRAINED_INTRA_PREDICTION (V4L2_CID_MPEG_BASE+383) -#define V4L2_CID_MPEG_VIDEO_H264_CHROMA_QP_INDEX_OFFSET (V4L2_CID_MPEG_BASE+384) -#define V4L2_CID_MPEG_VIDEO_H264_I_FRAME_MIN_QP (V4L2_CID_MPEG_BASE+385) -#define V4L2_CID_MPEG_VIDEO_H264_I_FRAME_MAX_QP (V4L2_CID_MPEG_BASE+386) -#define V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MIN_QP (V4L2_CID_MPEG_BASE+387) -#define V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MAX_QP (V4L2_CID_MPEG_BASE+388) -#define V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP (V4L2_CID_MPEG_BASE+400) -#define V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP (V4L2_CID_MPEG_BASE+401) -#define V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP (V4L2_CID_MPEG_BASE+402) -#define V4L2_CID_MPEG_VIDEO_MPEG4_MIN_QP (V4L2_CID_MPEG_BASE+403) -#define V4L2_CID_MPEG_VIDEO_MPEG4_MAX_QP (V4L2_CID_MPEG_BASE+404) -#define V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL (V4L2_CID_MPEG_BASE+405) +#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER (V4L2_CID_CODEC_BASE+381) +#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER_QP (V4L2_CID_CODEC_BASE+382) +#define V4L2_CID_MPEG_VIDEO_H264_CONSTRAINED_INTRA_PREDICTION (V4L2_CID_CODEC_BASE+383) +#define V4L2_CID_MPEG_VIDEO_H264_CHROMA_QP_INDEX_OFFSET (V4L2_CID_CODEC_BASE+384) +#define V4L2_CID_MPEG_VIDEO_H264_I_FRAME_MIN_QP (V4L2_CID_CODEC_BASE+385) +#define V4L2_CID_MPEG_VIDEO_H264_I_FRAME_MAX_QP (V4L2_CID_CODEC_BASE+386) +#define V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MIN_QP (V4L2_CID_CODEC_BASE+387) +#define V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MAX_QP (V4L2_CID_CODEC_BASE+388) +#define V4L2_CID_MPEG_VIDEO_H264_B_FRAME_MIN_QP (V4L2_CID_CODEC_BASE+389) +#define V4L2_CID_MPEG_VIDEO_H264_B_FRAME_MAX_QP (V4L2_CID_CODEC_BASE+390) +#define V4L2_CID_MPEG_VIDEO_H264_HIER_CODING_L0_BR (V4L2_CID_CODEC_BASE+391) +#define V4L2_CID_MPEG_VIDEO_H264_HIER_CODING_L1_BR (V4L2_CID_CODEC_BASE+392) +#define V4L2_CID_MPEG_VIDEO_H264_HIER_CODING_L2_BR (V4L2_CID_CODEC_BASE+393) +#define V4L2_CID_MPEG_VIDEO_H264_HIER_CODING_L3_BR (V4L2_CID_CODEC_BASE+394) +#define V4L2_CID_MPEG_VIDEO_H264_HIER_CODING_L4_BR (V4L2_CID_CODEC_BASE+395) +#define V4L2_CID_MPEG_VIDEO_H264_HIER_CODING_L5_BR (V4L2_CID_CODEC_BASE+396) +#define V4L2_CID_MPEG_VIDEO_H264_HIER_CODING_L6_BR (V4L2_CID_CODEC_BASE+397) +#define V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP (V4L2_CID_CODEC_BASE+400) +#define V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP (V4L2_CID_CODEC_BASE+401) +#define V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP (V4L2_CID_CODEC_BASE+402) +#define V4L2_CID_MPEG_VIDEO_MPEG4_MIN_QP (V4L2_CID_CODEC_BASE+403) +#define V4L2_CID_MPEG_VIDEO_MPEG4_MAX_QP (V4L2_CID_CODEC_BASE+404) +#define V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL (V4L2_CID_CODEC_BASE+405) enum v4l2_mpeg_video_mpeg4_level { V4L2_MPEG_VIDEO_MPEG4_LEVEL_0 = 0, V4L2_MPEG_VIDEO_MPEG4_LEVEL_0B = 1, @@ -592,7 +616,7 @@ enum v4l2_mpeg_video_mpeg4_level { V4L2_MPEG_VIDEO_MPEG4_LEVEL_4 = 6, V4L2_MPEG_VIDEO_MPEG4_LEVEL_5 = 7, }; -#define V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE (V4L2_CID_MPEG_BASE+406) +#define V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE (V4L2_CID_CODEC_BASE+406) enum v4l2_mpeg_video_mpeg4_profile { V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE = 0, V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE = 1, @@ -600,40 +624,40 @@ enum v4l2_mpeg_video_mpeg4_profile { V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE_SCALABLE = 3, V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_CODING_EFFICIENCY = 4, }; -#define V4L2_CID_MPEG_VIDEO_MPEG4_QPEL (V4L2_CID_MPEG_BASE+407) +#define V4L2_CID_MPEG_VIDEO_MPEG4_QPEL (V4L2_CID_CODEC_BASE+407) /* Control IDs for VP8 streams * Although VP8 is not part of MPEG we add these controls to the MPEG class * as that class is already handling other video compression standards */ -#define V4L2_CID_MPEG_VIDEO_VPX_NUM_PARTITIONS (V4L2_CID_MPEG_BASE+500) +#define V4L2_CID_MPEG_VIDEO_VPX_NUM_PARTITIONS (V4L2_CID_CODEC_BASE+500) enum v4l2_vp8_num_partitions { V4L2_CID_MPEG_VIDEO_VPX_1_PARTITION = 0, V4L2_CID_MPEG_VIDEO_VPX_2_PARTITIONS = 1, V4L2_CID_MPEG_VIDEO_VPX_4_PARTITIONS = 2, V4L2_CID_MPEG_VIDEO_VPX_8_PARTITIONS = 3, }; -#define V4L2_CID_MPEG_VIDEO_VPX_IMD_DISABLE_4X4 (V4L2_CID_MPEG_BASE+501) -#define V4L2_CID_MPEG_VIDEO_VPX_NUM_REF_FRAMES (V4L2_CID_MPEG_BASE+502) +#define V4L2_CID_MPEG_VIDEO_VPX_IMD_DISABLE_4X4 (V4L2_CID_CODEC_BASE+501) +#define V4L2_CID_MPEG_VIDEO_VPX_NUM_REF_FRAMES (V4L2_CID_CODEC_BASE+502) enum v4l2_vp8_num_ref_frames { V4L2_CID_MPEG_VIDEO_VPX_1_REF_FRAME = 0, V4L2_CID_MPEG_VIDEO_VPX_2_REF_FRAME = 1, V4L2_CID_MPEG_VIDEO_VPX_3_REF_FRAME = 2, }; -#define V4L2_CID_MPEG_VIDEO_VPX_FILTER_LEVEL (V4L2_CID_MPEG_BASE+503) -#define V4L2_CID_MPEG_VIDEO_VPX_FILTER_SHARPNESS (V4L2_CID_MPEG_BASE+504) -#define V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_REF_PERIOD (V4L2_CID_MPEG_BASE+505) -#define V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL (V4L2_CID_MPEG_BASE+506) +#define V4L2_CID_MPEG_VIDEO_VPX_FILTER_LEVEL (V4L2_CID_CODEC_BASE+503) +#define V4L2_CID_MPEG_VIDEO_VPX_FILTER_SHARPNESS (V4L2_CID_CODEC_BASE+504) +#define V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_REF_PERIOD (V4L2_CID_CODEC_BASE+505) +#define V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL (V4L2_CID_CODEC_BASE+506) enum v4l2_vp8_golden_frame_sel { V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_USE_PREV = 0, V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_USE_REF_PERIOD = 1, }; -#define V4L2_CID_MPEG_VIDEO_VPX_MIN_QP (V4L2_CID_MPEG_BASE+507) -#define V4L2_CID_MPEG_VIDEO_VPX_MAX_QP (V4L2_CID_MPEG_BASE+508) -#define V4L2_CID_MPEG_VIDEO_VPX_I_FRAME_QP (V4L2_CID_MPEG_BASE+509) -#define V4L2_CID_MPEG_VIDEO_VPX_P_FRAME_QP (V4L2_CID_MPEG_BASE+510) +#define V4L2_CID_MPEG_VIDEO_VPX_MIN_QP (V4L2_CID_CODEC_BASE+507) +#define V4L2_CID_MPEG_VIDEO_VPX_MAX_QP (V4L2_CID_CODEC_BASE+508) +#define V4L2_CID_MPEG_VIDEO_VPX_I_FRAME_QP (V4L2_CID_CODEC_BASE+509) +#define V4L2_CID_MPEG_VIDEO_VPX_P_FRAME_QP (V4L2_CID_CODEC_BASE+510) -#define V4L2_CID_MPEG_VIDEO_VP8_PROFILE (V4L2_CID_MPEG_BASE+511) +#define V4L2_CID_MPEG_VIDEO_VP8_PROFILE (V4L2_CID_CODEC_BASE+511) enum v4l2_mpeg_video_vp8_profile { V4L2_MPEG_VIDEO_VP8_PROFILE_0 = 0, V4L2_MPEG_VIDEO_VP8_PROFILE_1 = 1, @@ -642,14 +666,14 @@ enum v4l2_mpeg_video_vp8_profile { }; /* Deprecated alias for compatibility reasons. */ #define V4L2_CID_MPEG_VIDEO_VPX_PROFILE V4L2_CID_MPEG_VIDEO_VP8_PROFILE -#define V4L2_CID_MPEG_VIDEO_VP9_PROFILE (V4L2_CID_MPEG_BASE+512) +#define V4L2_CID_MPEG_VIDEO_VP9_PROFILE (V4L2_CID_CODEC_BASE+512) enum v4l2_mpeg_video_vp9_profile { V4L2_MPEG_VIDEO_VP9_PROFILE_0 = 0, V4L2_MPEG_VIDEO_VP9_PROFILE_1 = 1, V4L2_MPEG_VIDEO_VP9_PROFILE_2 = 2, V4L2_MPEG_VIDEO_VP9_PROFILE_3 = 3, }; -#define V4L2_CID_MPEG_VIDEO_VP9_LEVEL (V4L2_CID_MPEG_BASE+513) +#define V4L2_CID_MPEG_VIDEO_VP9_LEVEL (V4L2_CID_CODEC_BASE+513) enum v4l2_mpeg_video_vp9_level { V4L2_MPEG_VIDEO_VP9_LEVEL_1_0 = 0, V4L2_MPEG_VIDEO_VP9_LEVEL_1_1 = 1, @@ -669,32 +693,32 @@ enum v4l2_mpeg_video_vp9_level { /* CIDs for HEVC encoding. */ -#define V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP (V4L2_CID_MPEG_BASE + 600) -#define V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP (V4L2_CID_MPEG_BASE + 601) -#define V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP (V4L2_CID_MPEG_BASE + 602) -#define V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_QP (V4L2_CID_MPEG_BASE + 603) -#define V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_QP (V4L2_CID_MPEG_BASE + 604) -#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_QP (V4L2_CID_MPEG_BASE + 605) -#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_TYPE (V4L2_CID_MPEG_BASE + 606) +#define V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP (V4L2_CID_CODEC_BASE + 600) +#define V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP (V4L2_CID_CODEC_BASE + 601) +#define V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP (V4L2_CID_CODEC_BASE + 602) +#define V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_QP (V4L2_CID_CODEC_BASE + 603) +#define V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_QP (V4L2_CID_CODEC_BASE + 604) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_QP (V4L2_CID_CODEC_BASE + 605) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_TYPE (V4L2_CID_CODEC_BASE + 606) enum v4l2_mpeg_video_hevc_hier_coding_type { V4L2_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_B = 0, V4L2_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_P = 1, }; -#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_LAYER (V4L2_CID_MPEG_BASE + 607) -#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L0_QP (V4L2_CID_MPEG_BASE + 608) -#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L1_QP (V4L2_CID_MPEG_BASE + 609) -#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L2_QP (V4L2_CID_MPEG_BASE + 610) -#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L3_QP (V4L2_CID_MPEG_BASE + 611) -#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L4_QP (V4L2_CID_MPEG_BASE + 612) -#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L5_QP (V4L2_CID_MPEG_BASE + 613) -#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L6_QP (V4L2_CID_MPEG_BASE + 614) -#define V4L2_CID_MPEG_VIDEO_HEVC_PROFILE (V4L2_CID_MPEG_BASE + 615) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_LAYER (V4L2_CID_CODEC_BASE + 607) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L0_QP (V4L2_CID_CODEC_BASE + 608) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L1_QP (V4L2_CID_CODEC_BASE + 609) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L2_QP (V4L2_CID_CODEC_BASE + 610) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L3_QP (V4L2_CID_CODEC_BASE + 611) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L4_QP (V4L2_CID_CODEC_BASE + 612) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L5_QP (V4L2_CID_CODEC_BASE + 613) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L6_QP (V4L2_CID_CODEC_BASE + 614) +#define V4L2_CID_MPEG_VIDEO_HEVC_PROFILE (V4L2_CID_CODEC_BASE + 615) enum v4l2_mpeg_video_hevc_profile { V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN = 0, V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN_STILL_PICTURE = 1, V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN_10 = 2, }; -#define V4L2_CID_MPEG_VIDEO_HEVC_LEVEL (V4L2_CID_MPEG_BASE + 616) +#define V4L2_CID_MPEG_VIDEO_HEVC_LEVEL (V4L2_CID_CODEC_BASE + 616) enum v4l2_mpeg_video_hevc_level { V4L2_MPEG_VIDEO_HEVC_LEVEL_1 = 0, V4L2_MPEG_VIDEO_HEVC_LEVEL_2 = 1, @@ -710,71 +734,163 @@ enum v4l2_mpeg_video_hevc_level { V4L2_MPEG_VIDEO_HEVC_LEVEL_6_1 = 11, V4L2_MPEG_VIDEO_HEVC_LEVEL_6_2 = 12, }; -#define V4L2_CID_MPEG_VIDEO_HEVC_FRAME_RATE_RESOLUTION (V4L2_CID_MPEG_BASE + 617) -#define V4L2_CID_MPEG_VIDEO_HEVC_TIER (V4L2_CID_MPEG_BASE + 618) +#define V4L2_CID_MPEG_VIDEO_HEVC_FRAME_RATE_RESOLUTION (V4L2_CID_CODEC_BASE + 617) +#define V4L2_CID_MPEG_VIDEO_HEVC_TIER (V4L2_CID_CODEC_BASE + 618) enum v4l2_mpeg_video_hevc_tier { V4L2_MPEG_VIDEO_HEVC_TIER_MAIN = 0, V4L2_MPEG_VIDEO_HEVC_TIER_HIGH = 1, }; -#define V4L2_CID_MPEG_VIDEO_HEVC_MAX_PARTITION_DEPTH (V4L2_CID_MPEG_BASE + 619) -#define V4L2_CID_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE (V4L2_CID_MPEG_BASE + 620) +#define V4L2_CID_MPEG_VIDEO_HEVC_MAX_PARTITION_DEPTH (V4L2_CID_CODEC_BASE + 619) +#define V4L2_CID_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE (V4L2_CID_CODEC_BASE + 620) enum v4l2_cid_mpeg_video_hevc_loop_filter_mode { V4L2_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE_DISABLED = 0, V4L2_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE_ENABLED = 1, V4L2_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY = 2, }; -#define V4L2_CID_MPEG_VIDEO_HEVC_LF_BETA_OFFSET_DIV2 (V4L2_CID_MPEG_BASE + 621) -#define V4L2_CID_MPEG_VIDEO_HEVC_LF_TC_OFFSET_DIV2 (V4L2_CID_MPEG_BASE + 622) -#define V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_TYPE (V4L2_CID_MPEG_BASE + 623) +#define V4L2_CID_MPEG_VIDEO_HEVC_LF_BETA_OFFSET_DIV2 (V4L2_CID_CODEC_BASE + 621) +#define V4L2_CID_MPEG_VIDEO_HEVC_LF_TC_OFFSET_DIV2 (V4L2_CID_CODEC_BASE + 622) +#define V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_TYPE (V4L2_CID_CODEC_BASE + 623) enum v4l2_cid_mpeg_video_hevc_refresh_type { V4L2_MPEG_VIDEO_HEVC_REFRESH_NONE = 0, V4L2_MPEG_VIDEO_HEVC_REFRESH_CRA = 1, V4L2_MPEG_VIDEO_HEVC_REFRESH_IDR = 2, }; -#define V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_PERIOD (V4L2_CID_MPEG_BASE + 624) -#define V4L2_CID_MPEG_VIDEO_HEVC_LOSSLESS_CU (V4L2_CID_MPEG_BASE + 625) -#define V4L2_CID_MPEG_VIDEO_HEVC_CONST_INTRA_PRED (V4L2_CID_MPEG_BASE + 626) -#define V4L2_CID_MPEG_VIDEO_HEVC_WAVEFRONT (V4L2_CID_MPEG_BASE + 627) -#define V4L2_CID_MPEG_VIDEO_HEVC_GENERAL_PB (V4L2_CID_MPEG_BASE + 628) -#define V4L2_CID_MPEG_VIDEO_HEVC_TEMPORAL_ID (V4L2_CID_MPEG_BASE + 629) -#define V4L2_CID_MPEG_VIDEO_HEVC_STRONG_SMOOTHING (V4L2_CID_MPEG_BASE + 630) -#define V4L2_CID_MPEG_VIDEO_HEVC_MAX_NUM_MERGE_MV_MINUS1 (V4L2_CID_MPEG_BASE + 631) -#define V4L2_CID_MPEG_VIDEO_HEVC_INTRA_PU_SPLIT (V4L2_CID_MPEG_BASE + 632) -#define V4L2_CID_MPEG_VIDEO_HEVC_TMV_PREDICTION (V4L2_CID_MPEG_BASE + 633) -#define V4L2_CID_MPEG_VIDEO_HEVC_WITHOUT_STARTCODE (V4L2_CID_MPEG_BASE + 634) -#define V4L2_CID_MPEG_VIDEO_HEVC_SIZE_OF_LENGTH_FIELD (V4L2_CID_MPEG_BASE + 635) +#define V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_PERIOD (V4L2_CID_CODEC_BASE + 624) +#define V4L2_CID_MPEG_VIDEO_HEVC_LOSSLESS_CU (V4L2_CID_CODEC_BASE + 625) +#define V4L2_CID_MPEG_VIDEO_HEVC_CONST_INTRA_PRED (V4L2_CID_CODEC_BASE + 626) +#define V4L2_CID_MPEG_VIDEO_HEVC_WAVEFRONT (V4L2_CID_CODEC_BASE + 627) +#define V4L2_CID_MPEG_VIDEO_HEVC_GENERAL_PB (V4L2_CID_CODEC_BASE + 628) +#define V4L2_CID_MPEG_VIDEO_HEVC_TEMPORAL_ID (V4L2_CID_CODEC_BASE + 629) +#define V4L2_CID_MPEG_VIDEO_HEVC_STRONG_SMOOTHING (V4L2_CID_CODEC_BASE + 630) +#define V4L2_CID_MPEG_VIDEO_HEVC_MAX_NUM_MERGE_MV_MINUS1 (V4L2_CID_CODEC_BASE + 631) +#define V4L2_CID_MPEG_VIDEO_HEVC_INTRA_PU_SPLIT (V4L2_CID_CODEC_BASE + 632) +#define V4L2_CID_MPEG_VIDEO_HEVC_TMV_PREDICTION (V4L2_CID_CODEC_BASE + 633) +#define V4L2_CID_MPEG_VIDEO_HEVC_WITHOUT_STARTCODE (V4L2_CID_CODEC_BASE + 634) +#define V4L2_CID_MPEG_VIDEO_HEVC_SIZE_OF_LENGTH_FIELD (V4L2_CID_CODEC_BASE + 635) enum v4l2_cid_mpeg_video_hevc_size_of_length_field { V4L2_MPEG_VIDEO_HEVC_SIZE_0 = 0, V4L2_MPEG_VIDEO_HEVC_SIZE_1 = 1, V4L2_MPEG_VIDEO_HEVC_SIZE_2 = 2, V4L2_MPEG_VIDEO_HEVC_SIZE_4 = 3, }; -#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L0_BR (V4L2_CID_MPEG_BASE + 636) -#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L1_BR (V4L2_CID_MPEG_BASE + 637) -#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L2_BR (V4L2_CID_MPEG_BASE + 638) -#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L3_BR (V4L2_CID_MPEG_BASE + 639) -#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L4_BR (V4L2_CID_MPEG_BASE + 640) -#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L5_BR (V4L2_CID_MPEG_BASE + 641) -#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L6_BR (V4L2_CID_MPEG_BASE + 642) -#define V4L2_CID_MPEG_VIDEO_REF_NUMBER_FOR_PFRAMES (V4L2_CID_MPEG_BASE + 643) -#define V4L2_CID_MPEG_VIDEO_PREPEND_SPSPPS_TO_IDR (V4L2_CID_MPEG_BASE + 644) -#define V4L2_CID_MPEG_VIDEO_CONSTANT_QUALITY (V4L2_CID_MPEG_BASE + 645) -#define V4L2_CID_MPEG_VIDEO_FRAME_SKIP_MODE (V4L2_CID_MPEG_BASE + 646) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L0_BR (V4L2_CID_CODEC_BASE + 636) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L1_BR (V4L2_CID_CODEC_BASE + 637) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L2_BR (V4L2_CID_CODEC_BASE + 638) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L3_BR (V4L2_CID_CODEC_BASE + 639) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L4_BR (V4L2_CID_CODEC_BASE + 640) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L5_BR (V4L2_CID_CODEC_BASE + 641) +#define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L6_BR (V4L2_CID_CODEC_BASE + 642) +#define V4L2_CID_MPEG_VIDEO_REF_NUMBER_FOR_PFRAMES (V4L2_CID_CODEC_BASE + 643) +#define V4L2_CID_MPEG_VIDEO_PREPEND_SPSPPS_TO_IDR (V4L2_CID_CODEC_BASE + 644) +#define V4L2_CID_MPEG_VIDEO_CONSTANT_QUALITY (V4L2_CID_CODEC_BASE + 645) +#define V4L2_CID_MPEG_VIDEO_FRAME_SKIP_MODE (V4L2_CID_CODEC_BASE + 646) enum v4l2_mpeg_video_frame_skip_mode { V4L2_MPEG_VIDEO_FRAME_SKIP_MODE_DISABLED = 0, V4L2_MPEG_VIDEO_FRAME_SKIP_MODE_LEVEL_LIMIT = 1, V4L2_MPEG_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT = 2, }; +#define V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_MIN_QP (V4L2_CID_CODEC_BASE + 647) +#define V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_MAX_QP (V4L2_CID_CODEC_BASE + 648) +#define V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_MIN_QP (V4L2_CID_CODEC_BASE + 649) +#define V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_MAX_QP (V4L2_CID_CODEC_BASE + 650) +#define V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_MIN_QP (V4L2_CID_CODEC_BASE + 651) +#define V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_MAX_QP (V4L2_CID_CODEC_BASE + 652) + +#define V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY (V4L2_CID_CODEC_BASE + 653) +#define V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY_ENABLE (V4L2_CID_CODEC_BASE + 654) + +#define V4L2_CID_MPEG_VIDEO_AV1_PROFILE (V4L2_CID_CODEC_BASE + 655) +/** + * enum v4l2_mpeg_video_av1_profile - AV1 profiles + * + * @V4L2_MPEG_VIDEO_AV1_PROFILE_MAIN: compliant decoders must be able to decode + * streams with seq_profile equal to 0. + * @V4L2_MPEG_VIDEO_AV1_PROFILE_HIGH: compliant decoders must be able to decode + * streams with seq_profile equal less than or equal to 1. + * @V4L2_MPEG_VIDEO_AV1_PROFILE_PROFESSIONAL: compliant decoders must be able to + * decode streams with seq_profile less than or equal to 2. + * + * Conveys the highest profile a decoder can work with. + */ +enum v4l2_mpeg_video_av1_profile { + V4L2_MPEG_VIDEO_AV1_PROFILE_MAIN = 0, + V4L2_MPEG_VIDEO_AV1_PROFILE_HIGH = 1, + V4L2_MPEG_VIDEO_AV1_PROFILE_PROFESSIONAL = 2, +}; + +#define V4L2_CID_MPEG_VIDEO_AV1_LEVEL (V4L2_CID_CODEC_BASE + 656) +/** + * enum v4l2_mpeg_video_av1_level - AV1 levels + * + * @V4L2_MPEG_VIDEO_AV1_LEVEL_2_0: Level 2.0. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_2_1: Level 2.1. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_2_2: Level 2.2. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_2_3: Level 2.3. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_3_0: Level 3.0. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_3_1: Level 3.1. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_3_2: Level 3.2. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_3_3: Level 3.3. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_4_0: Level 4.0. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_4_1: Level 4.1. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_4_2: Level 4.2. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_4_3: Level 4.3. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_5_0: Level 5.0. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_5_1: Level 5.1. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_5_2: Level 5.2. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_5_3: Level 5.3. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_6_0: Level 6.0. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_6_1: Level 6.1. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_6_2: Level 6.2. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_6_3: Level 6.3. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_7_0: Level 7.0. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_7_1: Level 7.1. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_7_2: Level 7.2. + * @V4L2_MPEG_VIDEO_AV1_LEVEL_7_3: Level 7.3. + * + * Conveys the highest level a decoder can work with. + */ +enum v4l2_mpeg_video_av1_level { + V4L2_MPEG_VIDEO_AV1_LEVEL_2_0 = 0, + V4L2_MPEG_VIDEO_AV1_LEVEL_2_1 = 1, + V4L2_MPEG_VIDEO_AV1_LEVEL_2_2 = 2, + V4L2_MPEG_VIDEO_AV1_LEVEL_2_3 = 3, + + V4L2_MPEG_VIDEO_AV1_LEVEL_3_0 = 4, + V4L2_MPEG_VIDEO_AV1_LEVEL_3_1 = 5, + V4L2_MPEG_VIDEO_AV1_LEVEL_3_2 = 6, + V4L2_MPEG_VIDEO_AV1_LEVEL_3_3 = 7, + + V4L2_MPEG_VIDEO_AV1_LEVEL_4_0 = 8, + V4L2_MPEG_VIDEO_AV1_LEVEL_4_1 = 9, + V4L2_MPEG_VIDEO_AV1_LEVEL_4_2 = 10, + V4L2_MPEG_VIDEO_AV1_LEVEL_4_3 = 11, + + V4L2_MPEG_VIDEO_AV1_LEVEL_5_0 = 12, + V4L2_MPEG_VIDEO_AV1_LEVEL_5_1 = 13, + V4L2_MPEG_VIDEO_AV1_LEVEL_5_2 = 14, + V4L2_MPEG_VIDEO_AV1_LEVEL_5_3 = 15, + + V4L2_MPEG_VIDEO_AV1_LEVEL_6_0 = 16, + V4L2_MPEG_VIDEO_AV1_LEVEL_6_1 = 17, + V4L2_MPEG_VIDEO_AV1_LEVEL_6_2 = 18, + V4L2_MPEG_VIDEO_AV1_LEVEL_6_3 = 19, + + V4L2_MPEG_VIDEO_AV1_LEVEL_7_0 = 20, + V4L2_MPEG_VIDEO_AV1_LEVEL_7_1 = 21, + V4L2_MPEG_VIDEO_AV1_LEVEL_7_2 = 22, + V4L2_MPEG_VIDEO_AV1_LEVEL_7_3 = 23 +}; + /* MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */ -#define V4L2_CID_MPEG_CX2341X_BASE (V4L2_CTRL_CLASS_MPEG | 0x1000) -#define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE (V4L2_CID_MPEG_CX2341X_BASE+0) +#define V4L2_CID_CODEC_CX2341X_BASE (V4L2_CTRL_CLASS_CODEC | 0x1000) +#define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE (V4L2_CID_CODEC_CX2341X_BASE+0) enum v4l2_mpeg_cx2341x_video_spatial_filter_mode { V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL = 0, V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO = 1, }; -#define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER (V4L2_CID_MPEG_CX2341X_BASE+1) -#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE (V4L2_CID_MPEG_CX2341X_BASE+2) +#define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER (V4L2_CID_CODEC_CX2341X_BASE+1) +#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE (V4L2_CID_CODEC_CX2341X_BASE+2) enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type { V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF = 0, V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_HOR = 1, @@ -782,18 +898,18 @@ enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type { V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_HV_SEPARABLE = 3, V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_SYM_NON_SEPARABLE = 4, }; -#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE (V4L2_CID_MPEG_CX2341X_BASE+3) +#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE (V4L2_CID_CODEC_CX2341X_BASE+3) enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type { V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF = 0, V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR = 1, }; -#define V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE (V4L2_CID_MPEG_CX2341X_BASE+4) +#define V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE (V4L2_CID_CODEC_CX2341X_BASE+4) enum v4l2_mpeg_cx2341x_video_temporal_filter_mode { V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL = 0, V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO = 1, }; -#define V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER (V4L2_CID_MPEG_CX2341X_BASE+5) -#define V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE (V4L2_CID_MPEG_CX2341X_BASE+6) +#define V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER (V4L2_CID_CODEC_CX2341X_BASE+5) +#define V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE (V4L2_CID_CODEC_CX2341X_BASE+6) enum v4l2_mpeg_cx2341x_video_median_filter_type { V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF = 0, V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR = 1, @@ -801,38 +917,38 @@ enum v4l2_mpeg_cx2341x_video_median_filter_type { V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR_VERT = 3, V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG = 4, }; -#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM (V4L2_CID_MPEG_CX2341X_BASE+7) -#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP (V4L2_CID_MPEG_CX2341X_BASE+8) -#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM (V4L2_CID_MPEG_CX2341X_BASE+9) -#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP (V4L2_CID_MPEG_CX2341X_BASE+10) -#define V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS (V4L2_CID_MPEG_CX2341X_BASE+11) +#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM (V4L2_CID_CODEC_CX2341X_BASE+7) +#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP (V4L2_CID_CODEC_CX2341X_BASE+8) +#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM (V4L2_CID_CODEC_CX2341X_BASE+9) +#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP (V4L2_CID_CODEC_CX2341X_BASE+10) +#define V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS (V4L2_CID_CODEC_CX2341X_BASE+11) /* MPEG-class control IDs specific to the Samsung MFC 5.1 driver as defined by V4L2 */ -#define V4L2_CID_MPEG_MFC51_BASE (V4L2_CTRL_CLASS_MPEG | 0x1100) +#define V4L2_CID_CODEC_MFC51_BASE (V4L2_CTRL_CLASS_CODEC | 0x1100) -#define V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY (V4L2_CID_MPEG_MFC51_BASE+0) -#define V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE (V4L2_CID_MPEG_MFC51_BASE+1) -#define V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE (V4L2_CID_MPEG_MFC51_BASE+2) +#define V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY (V4L2_CID_CODEC_MFC51_BASE+0) +#define V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE (V4L2_CID_CODEC_MFC51_BASE+1) +#define V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE (V4L2_CID_CODEC_MFC51_BASE+2) enum v4l2_mpeg_mfc51_video_frame_skip_mode { V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_DISABLED = 0, V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_LEVEL_LIMIT = 1, V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT = 2, }; -#define V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE (V4L2_CID_MPEG_MFC51_BASE+3) +#define V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE (V4L2_CID_CODEC_MFC51_BASE+3) enum v4l2_mpeg_mfc51_video_force_frame_type { V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_DISABLED = 0, V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_I_FRAME = 1, V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_NOT_CODED = 2, }; -#define V4L2_CID_MPEG_MFC51_VIDEO_PADDING (V4L2_CID_MPEG_MFC51_BASE+4) -#define V4L2_CID_MPEG_MFC51_VIDEO_PADDING_YUV (V4L2_CID_MPEG_MFC51_BASE+5) -#define V4L2_CID_MPEG_MFC51_VIDEO_RC_FIXED_TARGET_BIT (V4L2_CID_MPEG_MFC51_BASE+6) -#define V4L2_CID_MPEG_MFC51_VIDEO_RC_REACTION_COEFF (V4L2_CID_MPEG_MFC51_BASE+7) -#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_ACTIVITY (V4L2_CID_MPEG_MFC51_BASE+50) -#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_DARK (V4L2_CID_MPEG_MFC51_BASE+51) -#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_SMOOTH (V4L2_CID_MPEG_MFC51_BASE+52) -#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_STATIC (V4L2_CID_MPEG_MFC51_BASE+53) -#define V4L2_CID_MPEG_MFC51_VIDEO_H264_NUM_REF_PIC_FOR_P (V4L2_CID_MPEG_MFC51_BASE+54) +#define V4L2_CID_MPEG_MFC51_VIDEO_PADDING (V4L2_CID_CODEC_MFC51_BASE+4) +#define V4L2_CID_MPEG_MFC51_VIDEO_PADDING_YUV (V4L2_CID_CODEC_MFC51_BASE+5) +#define V4L2_CID_MPEG_MFC51_VIDEO_RC_FIXED_TARGET_BIT (V4L2_CID_CODEC_MFC51_BASE+6) +#define V4L2_CID_MPEG_MFC51_VIDEO_RC_REACTION_COEFF (V4L2_CID_CODEC_MFC51_BASE+7) +#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_ACTIVITY (V4L2_CID_CODEC_MFC51_BASE+50) +#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_DARK (V4L2_CID_CODEC_MFC51_BASE+51) +#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_SMOOTH (V4L2_CID_CODEC_MFC51_BASE+52) +#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_STATIC (V4L2_CID_CODEC_MFC51_BASE+53) +#define V4L2_CID_MPEG_MFC51_VIDEO_H264_NUM_REF_PIC_FOR_P (V4L2_CID_CODEC_MFC51_BASE+54) /* Camera class control IDs */ @@ -953,6 +1069,8 @@ enum v4l2_auto_focus_range { #define V4L2_CID_CAMERA_SENSOR_ROTATION (V4L2_CID_CAMERA_CLASS_BASE+35) +#define V4L2_CID_HDR_SENSOR_MODE (V4L2_CID_CAMERA_CLASS_BASE+36) + /* FM Modulator class control IDs */ #define V4L2_CID_FM_TX_CLASS_BASE (V4L2_CTRL_CLASS_FM_TX | 0x900) @@ -1076,6 +1194,7 @@ enum v4l2_jpeg_chroma_subsampling { #define V4L2_CID_TEST_PATTERN_BLUE (V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 6) #define V4L2_CID_TEST_PATTERN_GREENB (V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 7) #define V4L2_CID_UNIT_CELL_SIZE (V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 8) +#define V4L2_CID_NOTIFY_GAINS (V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 9) /* Image processing controls */ @@ -1169,4 +1288,2198 @@ enum v4l2_detect_md_mode { #define V4L2_CID_DETECT_MD_THRESHOLD_GRID (V4L2_CID_DETECT_CLASS_BASE + 3) #define V4L2_CID_DETECT_MD_REGION_GRID (V4L2_CID_DETECT_CLASS_BASE + 4) + +/* Stateless CODECs controls */ +#define V4L2_CID_CODEC_STATELESS_BASE (V4L2_CTRL_CLASS_CODEC_STATELESS | 0x900) +#define V4L2_CID_CODEC_STATELESS_CLASS (V4L2_CTRL_CLASS_CODEC_STATELESS | 1) + +#define V4L2_CID_STATELESS_H264_DECODE_MODE (V4L2_CID_CODEC_STATELESS_BASE + 0) +/** + * enum v4l2_stateless_h264_decode_mode - Decoding mode + * + * @V4L2_STATELESS_H264_DECODE_MODE_SLICE_BASED: indicates that decoding + * is performed one slice at a time. In this mode, + * V4L2_CID_STATELESS_H264_SLICE_PARAMS must contain the parsed slice + * parameters and the OUTPUT buffer must contain a single slice. + * V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF feature is used + * in order to support multislice frames. + * @V4L2_STATELESS_H264_DECODE_MODE_FRAME_BASED: indicates that + * decoding is performed per frame. The OUTPUT buffer must contain + * all slices and also both fields. This mode is typically supported + * by device drivers that are able to parse the slice(s) header(s) + * in hardware. When this mode is selected, + * V4L2_CID_STATELESS_H264_SLICE_PARAMS is not used. + */ +enum v4l2_stateless_h264_decode_mode { + V4L2_STATELESS_H264_DECODE_MODE_SLICE_BASED, + V4L2_STATELESS_H264_DECODE_MODE_FRAME_BASED, +}; + +#define V4L2_CID_STATELESS_H264_START_CODE (V4L2_CID_CODEC_STATELESS_BASE + 1) +/** + * enum v4l2_stateless_h264_start_code - Start code + * + * @V4L2_STATELESS_H264_START_CODE_NONE: slices are passed + * to the driver without any start code. + * @V4L2_STATELESS_H264_START_CODE_ANNEX_B: slices are passed + * to the driver with an Annex B start code prefix + * (legal start codes can be 3-bytes 0x000001 or 4-bytes 0x00000001). + * This mode is typically supported by device drivers that parse + * the start code in hardware. + */ +enum v4l2_stateless_h264_start_code { + V4L2_STATELESS_H264_START_CODE_NONE, + V4L2_STATELESS_H264_START_CODE_ANNEX_B, +}; + +#define V4L2_H264_SPS_CONSTRAINT_SET0_FLAG 0x01 +#define V4L2_H264_SPS_CONSTRAINT_SET1_FLAG 0x02 +#define V4L2_H264_SPS_CONSTRAINT_SET2_FLAG 0x04 +#define V4L2_H264_SPS_CONSTRAINT_SET3_FLAG 0x08 +#define V4L2_H264_SPS_CONSTRAINT_SET4_FLAG 0x10 +#define V4L2_H264_SPS_CONSTRAINT_SET5_FLAG 0x20 + +#define V4L2_H264_SPS_FLAG_SEPARATE_COLOUR_PLANE 0x01 +#define V4L2_H264_SPS_FLAG_QPPRIME_Y_ZERO_TRANSFORM_BYPASS 0x02 +#define V4L2_H264_SPS_FLAG_DELTA_PIC_ORDER_ALWAYS_ZERO 0x04 +#define V4L2_H264_SPS_FLAG_GAPS_IN_FRAME_NUM_VALUE_ALLOWED 0x08 +#define V4L2_H264_SPS_FLAG_FRAME_MBS_ONLY 0x10 +#define V4L2_H264_SPS_FLAG_MB_ADAPTIVE_FRAME_FIELD 0x20 +#define V4L2_H264_SPS_FLAG_DIRECT_8X8_INFERENCE 0x40 + +#define V4L2_H264_SPS_HAS_CHROMA_FORMAT(sps) \ + ((sps)->profile_idc == 100 || (sps)->profile_idc == 110 || \ + (sps)->profile_idc == 122 || (sps)->profile_idc == 244 || \ + (sps)->profile_idc == 44 || (sps)->profile_idc == 83 || \ + (sps)->profile_idc == 86 || (sps)->profile_idc == 118 || \ + (sps)->profile_idc == 128 || (sps)->profile_idc == 138 || \ + (sps)->profile_idc == 139 || (sps)->profile_idc == 134 || \ + (sps)->profile_idc == 135) + +#define V4L2_CID_STATELESS_H264_SPS (V4L2_CID_CODEC_STATELESS_BASE + 2) +/** + * struct v4l2_ctrl_h264_sps - H264 sequence parameter set + * + * All the members on this sequence parameter set structure match the + * sequence parameter set syntax as specified by the H264 specification. + * + * @profile_idc: see H264 specification. + * @constraint_set_flags: see H264 specification. + * @level_idc: see H264 specification. + * @seq_parameter_set_id: see H264 specification. + * @chroma_format_idc: see H264 specification. + * @bit_depth_luma_minus8: see H264 specification. + * @bit_depth_chroma_minus8: see H264 specification. + * @log2_max_frame_num_minus4: see H264 specification. + * @pic_order_cnt_type: see H264 specification. + * @log2_max_pic_order_cnt_lsb_minus4: see H264 specification. + * @max_num_ref_frames: see H264 specification. + * @num_ref_frames_in_pic_order_cnt_cycle: see H264 specification. + * @offset_for_ref_frame: see H264 specification. + * @offset_for_non_ref_pic: see H264 specification. + * @offset_for_top_to_bottom_field: see H264 specification. + * @pic_width_in_mbs_minus1: see H264 specification. + * @pic_height_in_map_units_minus1: see H264 specification. + * @flags: see V4L2_H264_SPS_FLAG_{}. + */ +struct v4l2_ctrl_h264_sps { + __u8 profile_idc; + __u8 constraint_set_flags; + __u8 level_idc; + __u8 seq_parameter_set_id; + __u8 chroma_format_idc; + __u8 bit_depth_luma_minus8; + __u8 bit_depth_chroma_minus8; + __u8 log2_max_frame_num_minus4; + __u8 pic_order_cnt_type; + __u8 log2_max_pic_order_cnt_lsb_minus4; + __u8 max_num_ref_frames; + __u8 num_ref_frames_in_pic_order_cnt_cycle; + __s32 offset_for_ref_frame[255]; + __s32 offset_for_non_ref_pic; + __s32 offset_for_top_to_bottom_field; + __u16 pic_width_in_mbs_minus1; + __u16 pic_height_in_map_units_minus1; + __u32 flags; +}; + +#define V4L2_H264_PPS_FLAG_ENTROPY_CODING_MODE 0x0001 +#define V4L2_H264_PPS_FLAG_BOTTOM_FIELD_PIC_ORDER_IN_FRAME_PRESENT 0x0002 +#define V4L2_H264_PPS_FLAG_WEIGHTED_PRED 0x0004 +#define V4L2_H264_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT 0x0008 +#define V4L2_H264_PPS_FLAG_CONSTRAINED_INTRA_PRED 0x0010 +#define V4L2_H264_PPS_FLAG_REDUNDANT_PIC_CNT_PRESENT 0x0020 +#define V4L2_H264_PPS_FLAG_TRANSFORM_8X8_MODE 0x0040 +#define V4L2_H264_PPS_FLAG_SCALING_MATRIX_PRESENT 0x0080 + +#define V4L2_CID_STATELESS_H264_PPS (V4L2_CID_CODEC_STATELESS_BASE + 3) +/** + * struct v4l2_ctrl_h264_pps - H264 picture parameter set + * + * Except where noted, all the members on this picture parameter set + * structure match the picture parameter set syntax as specified + * by the H264 specification. + * + * In particular, V4L2_H264_PPS_FLAG_SCALING_MATRIX_PRESENT flag + * has a specific meaning. This flag should be set if a non-flat + * scaling matrix applies to the picture. In this case, applications + * are expected to use V4L2_CID_STATELESS_H264_SCALING_MATRIX, + * to pass the values of the non-flat matrices. + * + * @pic_parameter_set_id: see H264 specification. + * @seq_parameter_set_id: see H264 specification. + * @num_slice_groups_minus1: see H264 specification. + * @num_ref_idx_l0_default_active_minus1: see H264 specification. + * @num_ref_idx_l1_default_active_minus1: see H264 specification. + * @weighted_bipred_idc: see H264 specification. + * @pic_init_qp_minus26: see H264 specification. + * @pic_init_qs_minus26: see H264 specification. + * @chroma_qp_index_offset: see H264 specification. + * @second_chroma_qp_index_offset: see H264 specification. + * @flags: see V4L2_H264_PPS_FLAG_{}. + */ +struct v4l2_ctrl_h264_pps { + __u8 pic_parameter_set_id; + __u8 seq_parameter_set_id; + __u8 num_slice_groups_minus1; + __u8 num_ref_idx_l0_default_active_minus1; + __u8 num_ref_idx_l1_default_active_minus1; + __u8 weighted_bipred_idc; + __s8 pic_init_qp_minus26; + __s8 pic_init_qs_minus26; + __s8 chroma_qp_index_offset; + __s8 second_chroma_qp_index_offset; + __u16 flags; +}; + +#define V4L2_CID_STATELESS_H264_SCALING_MATRIX (V4L2_CID_CODEC_STATELESS_BASE + 4) +/** + * struct v4l2_ctrl_h264_scaling_matrix - H264 scaling matrices + * + * @scaling_list_4x4: scaling matrix after applying the inverse + * scanning process. Expected list order is Intra Y, Intra Cb, + * Intra Cr, Inter Y, Inter Cb, Inter Cr. The values on each + * scaling list are expected in raster scan order. + * @scaling_list_8x8: scaling matrix after applying the inverse + * scanning process. Expected list order is Intra Y, Inter Y, + * Intra Cb, Inter Cb, Intra Cr, Inter Cr. The values on each + * scaling list are expected in raster scan order. + * + * Note that the list order is different for the 4x4 and 8x8 + * matrices as per the H264 specification, see table 7-2 "Assignment + * of mnemonic names to scaling list indices and specification of + * fall-back rule". + */ +struct v4l2_ctrl_h264_scaling_matrix { + __u8 scaling_list_4x4[6][16]; + __u8 scaling_list_8x8[6][64]; +}; + +struct v4l2_h264_weight_factors { + __s16 luma_weight[32]; + __s16 luma_offset[32]; + __s16 chroma_weight[32][2]; + __s16 chroma_offset[32][2]; +}; + +#define V4L2_H264_CTRL_PRED_WEIGHTS_REQUIRED(pps, slice) \ + ((((pps)->flags & V4L2_H264_PPS_FLAG_WEIGHTED_PRED) && \ + ((slice)->slice_type == V4L2_H264_SLICE_TYPE_P || \ + (slice)->slice_type == V4L2_H264_SLICE_TYPE_SP)) || \ + ((pps)->weighted_bipred_idc == 1 && \ + (slice)->slice_type == V4L2_H264_SLICE_TYPE_B)) + +#define V4L2_CID_STATELESS_H264_PRED_WEIGHTS (V4L2_CID_CODEC_STATELESS_BASE + 5) +/** + * struct v4l2_ctrl_h264_pred_weights - Prediction weight table + * + * Prediction weight table, which matches the syntax specified + * by the H264 specification. + * + * @luma_log2_weight_denom: see H264 specification. + * @chroma_log2_weight_denom: see H264 specification. + * @weight_factors: luma and chroma weight factors. + */ +struct v4l2_ctrl_h264_pred_weights { + __u16 luma_log2_weight_denom; + __u16 chroma_log2_weight_denom; + struct v4l2_h264_weight_factors weight_factors[2]; +}; + +#define V4L2_H264_SLICE_TYPE_P 0 +#define V4L2_H264_SLICE_TYPE_B 1 +#define V4L2_H264_SLICE_TYPE_I 2 +#define V4L2_H264_SLICE_TYPE_SP 3 +#define V4L2_H264_SLICE_TYPE_SI 4 + +#define V4L2_H264_SLICE_FLAG_DIRECT_SPATIAL_MV_PRED 0x01 +#define V4L2_H264_SLICE_FLAG_SP_FOR_SWITCH 0x02 + +#define V4L2_H264_TOP_FIELD_REF 0x1 +#define V4L2_H264_BOTTOM_FIELD_REF 0x2 +#define V4L2_H264_FRAME_REF 0x3 + +/** + * struct v4l2_h264_reference - H264 picture reference + * + * @fields: indicates how the picture is referenced. + * Valid values are V4L2_H264_{}_REF. + * @index: index into v4l2_ctrl_h264_decode_params.dpb[]. + */ +struct v4l2_h264_reference { + __u8 fields; + __u8 index; +}; + +/* + * Maximum DPB size, as specified by section 'A.3.1 Level limits + * common to the Baseline, Main, and Extended profiles'. + */ +#define V4L2_H264_NUM_DPB_ENTRIES 16 +#define V4L2_H264_REF_LIST_LEN (2 * V4L2_H264_NUM_DPB_ENTRIES) + +#define V4L2_CID_STATELESS_H264_SLICE_PARAMS (V4L2_CID_CODEC_STATELESS_BASE + 6) +/** + * struct v4l2_ctrl_h264_slice_params - H264 slice parameters + * + * This structure holds the H264 syntax elements that are specified + * as non-invariant for the slices in a given frame. + * + * Slice invariant syntax elements are contained in struct + * v4l2_ctrl_h264_decode_params. This is done to reduce the API surface + * on frame-based decoders, where slice header parsing is done by the + * hardware. + * + * Slice invariant syntax elements are specified in specification section + * "7.4.3 Slice header semantics". + * + * Except where noted, the members on this struct match the slice header syntax. + * + * @header_bit_size: offset in bits to slice_data() from the beginning of this slice. + * @first_mb_in_slice: see H264 specification. + * @slice_type: see H264 specification. + * @colour_plane_id: see H264 specification. + * @redundant_pic_cnt: see H264 specification. + * @cabac_init_idc: see H264 specification. + * @slice_qp_delta: see H264 specification. + * @slice_qs_delta: see H264 specification. + * @disable_deblocking_filter_idc: see H264 specification. + * @slice_alpha_c0_offset_div2: see H264 specification. + * @slice_beta_offset_div2: see H264 specification. + * @num_ref_idx_l0_active_minus1: see H264 specification. + * @num_ref_idx_l1_active_minus1: see H264 specification. + * @reserved: padding field. Should be zeroed by applications. + * @ref_pic_list0: reference picture list 0 after applying the per-slice modifications. + * @ref_pic_list1: reference picture list 1 after applying the per-slice modifications. + * @flags: see V4L2_H264_SLICE_FLAG_{}. + */ +struct v4l2_ctrl_h264_slice_params { + __u32 header_bit_size; + __u32 first_mb_in_slice; + __u8 slice_type; + __u8 colour_plane_id; + __u8 redundant_pic_cnt; + __u8 cabac_init_idc; + __s8 slice_qp_delta; + __s8 slice_qs_delta; + __u8 disable_deblocking_filter_idc; + __s8 slice_alpha_c0_offset_div2; + __s8 slice_beta_offset_div2; + __u8 num_ref_idx_l0_active_minus1; + __u8 num_ref_idx_l1_active_minus1; + + __u8 reserved; + + struct v4l2_h264_reference ref_pic_list0[V4L2_H264_REF_LIST_LEN]; + struct v4l2_h264_reference ref_pic_list1[V4L2_H264_REF_LIST_LEN]; + + __u32 flags; +}; + +#define V4L2_H264_DPB_ENTRY_FLAG_VALID 0x01 +#define V4L2_H264_DPB_ENTRY_FLAG_ACTIVE 0x02 +#define V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM 0x04 +#define V4L2_H264_DPB_ENTRY_FLAG_FIELD 0x08 + +/** + * struct v4l2_h264_dpb_entry - H264 decoded picture buffer entry + * + * @reference_ts: timestamp of the V4L2 capture buffer to use as reference. + * The timestamp refers to the timestamp field in struct v4l2_buffer. + * Use v4l2_timeval_to_ns() to convert the struct timeval to a __u64. + * @pic_num: matches PicNum variable assigned during the reference + * picture lists construction process. + * @frame_num: frame identifier which matches frame_num syntax element. + * @fields: indicates how the DPB entry is referenced. Valid values are + * V4L2_H264_{}_REF. + * @reserved: padding field. Should be zeroed by applications. + * @top_field_order_cnt: matches TopFieldOrderCnt picture value. + * @bottom_field_order_cnt: matches BottomFieldOrderCnt picture value. + * Note that picture field is indicated by v4l2_buffer.field. + * @flags: see V4L2_H264_DPB_ENTRY_FLAG_{}. + */ +struct v4l2_h264_dpb_entry { + __u64 reference_ts; + __u32 pic_num; + __u16 frame_num; + __u8 fields; + __u8 reserved[5]; + __s32 top_field_order_cnt; + __s32 bottom_field_order_cnt; + __u32 flags; +}; + +#define V4L2_H264_DECODE_PARAM_FLAG_IDR_PIC 0x01 +#define V4L2_H264_DECODE_PARAM_FLAG_FIELD_PIC 0x02 +#define V4L2_H264_DECODE_PARAM_FLAG_BOTTOM_FIELD 0x04 +#define V4L2_H264_DECODE_PARAM_FLAG_PFRAME 0x08 +#define V4L2_H264_DECODE_PARAM_FLAG_BFRAME 0x10 + +#define V4L2_CID_STATELESS_H264_DECODE_PARAMS (V4L2_CID_CODEC_STATELESS_BASE + 7) +/** + * struct v4l2_ctrl_h264_decode_params - H264 decoding parameters + * + * @dpb: decoded picture buffer. + * @nal_ref_idc: slice header syntax element. + * @frame_num: slice header syntax element. + * @top_field_order_cnt: matches TopFieldOrderCnt picture value. + * @bottom_field_order_cnt: matches BottomFieldOrderCnt picture value. + * Note that picture field is indicated by v4l2_buffer.field. + * @idr_pic_id: slice header syntax element. + * @pic_order_cnt_lsb: slice header syntax element. + * @delta_pic_order_cnt_bottom: slice header syntax element. + * @delta_pic_order_cnt0: slice header syntax element. + * @delta_pic_order_cnt1: slice header syntax element. + * @dec_ref_pic_marking_bit_size: size in bits of dec_ref_pic_marking() + * syntax element. + * @pic_order_cnt_bit_size: size in bits of pic order count syntax. + * @slice_group_change_cycle: slice header syntax element. + * @reserved: padding field. Should be zeroed by applications. + * @flags: see V4L2_H264_DECODE_PARAM_FLAG_{}. + */ +struct v4l2_ctrl_h264_decode_params { + struct v4l2_h264_dpb_entry dpb[V4L2_H264_NUM_DPB_ENTRIES]; + __u16 nal_ref_idc; + __u16 frame_num; + __s32 top_field_order_cnt; + __s32 bottom_field_order_cnt; + __u16 idr_pic_id; + __u16 pic_order_cnt_lsb; + __s32 delta_pic_order_cnt_bottom; + __s32 delta_pic_order_cnt0; + __s32 delta_pic_order_cnt1; + __u32 dec_ref_pic_marking_bit_size; + __u32 pic_order_cnt_bit_size; + __u32 slice_group_change_cycle; + + __u32 reserved; + __u32 flags; +}; + + +/* Stateless FWHT control, used by the vicodec driver */ + +/* Current FWHT version */ +#define V4L2_FWHT_VERSION 3 + +/* Set if this is an interlaced format */ +#define V4L2_FWHT_FL_IS_INTERLACED _BITUL(0) +/* Set if this is a bottom-first (NTSC) interlaced format */ +#define V4L2_FWHT_FL_IS_BOTTOM_FIRST _BITUL(1) +/* Set if each 'frame' contains just one field */ +#define V4L2_FWHT_FL_IS_ALTERNATE _BITUL(2) +/* + * If V4L2_FWHT_FL_IS_ALTERNATE was set, then this is set if this + * 'frame' is the bottom field, else it is the top field. + */ +#define V4L2_FWHT_FL_IS_BOTTOM_FIELD _BITUL(3) +/* Set if the Y' plane is uncompressed */ +#define V4L2_FWHT_FL_LUMA_IS_UNCOMPRESSED _BITUL(4) +/* Set if the Cb plane is uncompressed */ +#define V4L2_FWHT_FL_CB_IS_UNCOMPRESSED _BITUL(5) +/* Set if the Cr plane is uncompressed */ +#define V4L2_FWHT_FL_CR_IS_UNCOMPRESSED _BITUL(6) +/* Set if the chroma plane is full height, if cleared it is half height */ +#define V4L2_FWHT_FL_CHROMA_FULL_HEIGHT _BITUL(7) +/* Set if the chroma plane is full width, if cleared it is half width */ +#define V4L2_FWHT_FL_CHROMA_FULL_WIDTH _BITUL(8) +/* Set if the alpha plane is uncompressed */ +#define V4L2_FWHT_FL_ALPHA_IS_UNCOMPRESSED _BITUL(9) +/* Set if this is an I Frame */ +#define V4L2_FWHT_FL_I_FRAME _BITUL(10) + +/* A 4-values flag - the number of components - 1 */ +#define V4L2_FWHT_FL_COMPONENTS_NUM_MSK GENMASK(18, 16) +#define V4L2_FWHT_FL_COMPONENTS_NUM_OFFSET 16 + +/* A 4-values flag - the pixel encoding type */ +#define V4L2_FWHT_FL_PIXENC_MSK GENMASK(20, 19) +#define V4L2_FWHT_FL_PIXENC_OFFSET 19 +#define V4L2_FWHT_FL_PIXENC_YUV (1 << V4L2_FWHT_FL_PIXENC_OFFSET) +#define V4L2_FWHT_FL_PIXENC_RGB (2 << V4L2_FWHT_FL_PIXENC_OFFSET) +#define V4L2_FWHT_FL_PIXENC_HSV (3 << V4L2_FWHT_FL_PIXENC_OFFSET) + +#define V4L2_CID_STATELESS_FWHT_PARAMS (V4L2_CID_CODEC_STATELESS_BASE + 100) +/** + * struct v4l2_ctrl_fwht_params - FWHT parameters + * + * @backward_ref_ts: timestamp of the V4L2 capture buffer to use as reference. + * The timestamp refers to the timestamp field in struct v4l2_buffer. + * Use v4l2_timeval_to_ns() to convert the struct timeval to a __u64. + * @version: must be V4L2_FWHT_VERSION. + * @width: width of frame. + * @height: height of frame. + * @flags: FWHT flags (see V4L2_FWHT_FL_*). + * @colorspace: the colorspace (enum v4l2_colorspace). + * @xfer_func: the transfer function (enum v4l2_xfer_func). + * @ycbcr_enc: the Y'CbCr encoding (enum v4l2_ycbcr_encoding). + * @quantization: the quantization (enum v4l2_quantization). + */ +struct v4l2_ctrl_fwht_params { + __u64 backward_ref_ts; + __u32 version; + __u32 width; + __u32 height; + __u32 flags; + __u32 colorspace; + __u32 xfer_func; + __u32 ycbcr_enc; + __u32 quantization; +}; + +/* Stateless VP8 control */ + +#define V4L2_VP8_SEGMENT_FLAG_ENABLED 0x01 +#define V4L2_VP8_SEGMENT_FLAG_UPDATE_MAP 0x02 +#define V4L2_VP8_SEGMENT_FLAG_UPDATE_FEATURE_DATA 0x04 +#define V4L2_VP8_SEGMENT_FLAG_DELTA_VALUE_MODE 0x08 + +/** + * struct v4l2_vp8_segment - VP8 segment-based adjustments parameters + * + * @quant_update: update values for the segment quantizer. + * @lf_update: update values for the loop filter level. + * @segment_probs: branch probabilities of the segment_id decoding tree. + * @padding: padding field. Should be zeroed by applications. + * @flags: see V4L2_VP8_SEGMENT_FLAG_{}. + * + * This structure contains segment-based adjustments related parameters. + * See the 'update_segmentation()' part of the frame header syntax, + * and section '9.3. Segment-Based Adjustments' of the VP8 specification + * for more details. + */ +struct v4l2_vp8_segment { + __s8 quant_update[4]; + __s8 lf_update[4]; + __u8 segment_probs[3]; + __u8 padding; + __u32 flags; +}; + +#define V4L2_VP8_LF_ADJ_ENABLE 0x01 +#define V4L2_VP8_LF_DELTA_UPDATE 0x02 +#define V4L2_VP8_LF_FILTER_TYPE_SIMPLE 0x04 + +/** + * struct v4l2_vp8_loop_filter - VP8 loop filter parameters + * + * @ref_frm_delta: Reference frame signed delta values. + * @mb_mode_delta: MB prediction mode signed delta values. + * @sharpness_level: matches sharpness_level syntax element. + * @level: matches loop_filter_level syntax element. + * @padding: padding field. Should be zeroed by applications. + * @flags: see V4L2_VP8_LF_{}. + * + * This structure contains loop filter related parameters. + * See the 'mb_lf_adjustments()' part of the frame header syntax, + * and section '9.4. Loop Filter Type and Levels' of the VP8 specification + * for more details. + */ +struct v4l2_vp8_loop_filter { + __s8 ref_frm_delta[4]; + __s8 mb_mode_delta[4]; + __u8 sharpness_level; + __u8 level; + __u16 padding; + __u32 flags; +}; + +/** + * struct v4l2_vp8_quantization - VP8 quantizattion indices + * + * @y_ac_qi: luma AC coefficient table index. + * @y_dc_delta: luma DC delta vaue. + * @y2_dc_delta: y2 block DC delta value. + * @y2_ac_delta: y2 block AC delta value. + * @uv_dc_delta: chroma DC delta value. + * @uv_ac_delta: chroma AC delta value. + * @padding: padding field. Should be zeroed by applications. + * + * This structure contains the quantization indices present + * in 'quant_indices()' part of the frame header syntax. + * See section '9.6. Dequantization Indices' of the VP8 specification + * for more details. + */ +struct v4l2_vp8_quantization { + __u8 y_ac_qi; + __s8 y_dc_delta; + __s8 y2_dc_delta; + __s8 y2_ac_delta; + __s8 uv_dc_delta; + __s8 uv_ac_delta; + __u16 padding; +}; + +#define V4L2_VP8_COEFF_PROB_CNT 11 +#define V4L2_VP8_MV_PROB_CNT 19 + +/** + * struct v4l2_vp8_entropy - VP8 update probabilities + * + * @coeff_probs: coefficient probability update values. + * @y_mode_probs: luma intra-prediction probabilities. + * @uv_mode_probs: chroma intra-prediction probabilities. + * @mv_probs: mv decoding probability. + * @padding: padding field. Should be zeroed by applications. + * + * This structure contains the update probabilities present in + * 'token_prob_update()' and 'mv_prob_update()' part of the frame header. + * See section '17.2. Probability Updates' of the VP8 specification + * for more details. + */ +struct v4l2_vp8_entropy { + __u8 coeff_probs[4][8][3][V4L2_VP8_COEFF_PROB_CNT]; + __u8 y_mode_probs[4]; + __u8 uv_mode_probs[3]; + __u8 mv_probs[2][V4L2_VP8_MV_PROB_CNT]; + __u8 padding[3]; +}; + +/** + * struct v4l2_vp8_entropy_coder_state - VP8 boolean coder state + * + * @range: coder state value for "Range" + * @value: coder state value for "Value" + * @bit_count: number of bits left in range "Value". + * @padding: padding field. Should be zeroed by applications. + * + * This structure contains the state for the boolean coder, as + * explained in section '7. Boolean Entropy Decoder' of the VP8 specification. + */ +struct v4l2_vp8_entropy_coder_state { + __u8 range; + __u8 value; + __u8 bit_count; + __u8 padding; +}; + +#define V4L2_VP8_FRAME_FLAG_KEY_FRAME 0x01 +#define V4L2_VP8_FRAME_FLAG_EXPERIMENTAL 0x02 +#define V4L2_VP8_FRAME_FLAG_SHOW_FRAME 0x04 +#define V4L2_VP8_FRAME_FLAG_MB_NO_SKIP_COEFF 0x08 +#define V4L2_VP8_FRAME_FLAG_SIGN_BIAS_GOLDEN 0x10 +#define V4L2_VP8_FRAME_FLAG_SIGN_BIAS_ALT 0x20 + +#define V4L2_VP8_FRAME_IS_KEY_FRAME(hdr) \ + (!!((hdr)->flags & V4L2_VP8_FRAME_FLAG_KEY_FRAME)) + +#define V4L2_CID_STATELESS_VP8_FRAME (V4L2_CID_CODEC_STATELESS_BASE + 200) +/** + * struct v4l2_ctrl_vp8_frame - VP8 frame parameters + * + * @segment: segmentation parameters. See &v4l2_vp8_segment for more details + * @lf: loop filter parameters. See &v4l2_vp8_loop_filter for more details + * @quant: quantization parameters. See &v4l2_vp8_quantization for more details + * @entropy: update probabilities. See &v4l2_vp8_entropy for more details + * @coder_state: boolean coder state. See &v4l2_vp8_entropy_coder_state for more details + * @width: frame width. + * @height: frame height. + * @horizontal_scale: horizontal scaling factor. + * @vertical_scale: vertical scaling factor. + * @version: bitstream version. + * @prob_skip_false: frame header syntax element. + * @prob_intra: frame header syntax element. + * @prob_last: frame header syntax element. + * @prob_gf: frame header syntax element. + * @num_dct_parts: number of DCT coefficients partitions. + * @first_part_size: size of the first partition, i.e. the control partition. + * @first_part_header_bits: size in bits of the first partition header portion. + * @dct_part_sizes: DCT coefficients sizes. + * @last_frame_ts: "last" reference buffer timestamp. + * The timestamp refers to the timestamp field in struct v4l2_buffer. + * Use v4l2_timeval_to_ns() to convert the struct timeval to a __u64. + * @golden_frame_ts: "golden" reference buffer timestamp. + * @alt_frame_ts: "alt" reference buffer timestamp. + * @flags: see V4L2_VP8_FRAME_FLAG_{}. + */ +struct v4l2_ctrl_vp8_frame { + struct v4l2_vp8_segment segment; + struct v4l2_vp8_loop_filter lf; + struct v4l2_vp8_quantization quant; + struct v4l2_vp8_entropy entropy; + struct v4l2_vp8_entropy_coder_state coder_state; + + __u16 width; + __u16 height; + + __u8 horizontal_scale; + __u8 vertical_scale; + + __u8 version; + __u8 prob_skip_false; + __u8 prob_intra; + __u8 prob_last; + __u8 prob_gf; + __u8 num_dct_parts; + + __u32 first_part_size; + __u32 first_part_header_bits; + __u32 dct_part_sizes[8]; + + __u64 last_frame_ts; + __u64 golden_frame_ts; + __u64 alt_frame_ts; + + __u64 flags; +}; + +/* Stateless MPEG-2 controls */ + +#define V4L2_MPEG2_SEQ_FLAG_PROGRESSIVE 0x01 + +#define V4L2_CID_STATELESS_MPEG2_SEQUENCE (V4L2_CID_CODEC_STATELESS_BASE+220) +/** + * struct v4l2_ctrl_mpeg2_sequence - MPEG-2 sequence header + * + * All the members on this structure match the sequence header and sequence + * extension syntaxes as specified by the MPEG-2 specification. + * + * Fields horizontal_size, vertical_size and vbv_buffer_size are a + * combination of respective _value and extension syntax elements, + * as described in section 6.3.3 "Sequence header". + * + * @horizontal_size: combination of elements horizontal_size_value and + * horizontal_size_extension. + * @vertical_size: combination of elements vertical_size_value and + * vertical_size_extension. + * @vbv_buffer_size: combination of elements vbv_buffer_size_value and + * vbv_buffer_size_extension. + * @profile_and_level_indication: see MPEG-2 specification. + * @chroma_format: see MPEG-2 specification. + * @flags: see V4L2_MPEG2_SEQ_FLAG_{}. + */ +struct v4l2_ctrl_mpeg2_sequence { + __u16 horizontal_size; + __u16 vertical_size; + __u32 vbv_buffer_size; + __u16 profile_and_level_indication; + __u8 chroma_format; + __u8 flags; +}; + +#define V4L2_MPEG2_PIC_CODING_TYPE_I 1 +#define V4L2_MPEG2_PIC_CODING_TYPE_P 2 +#define V4L2_MPEG2_PIC_CODING_TYPE_B 3 +#define V4L2_MPEG2_PIC_CODING_TYPE_D 4 + +#define V4L2_MPEG2_PIC_TOP_FIELD 0x1 +#define V4L2_MPEG2_PIC_BOTTOM_FIELD 0x2 +#define V4L2_MPEG2_PIC_FRAME 0x3 + +#define V4L2_MPEG2_PIC_FLAG_TOP_FIELD_FIRST 0x0001 +#define V4L2_MPEG2_PIC_FLAG_FRAME_PRED_DCT 0x0002 +#define V4L2_MPEG2_PIC_FLAG_CONCEALMENT_MV 0x0004 +#define V4L2_MPEG2_PIC_FLAG_Q_SCALE_TYPE 0x0008 +#define V4L2_MPEG2_PIC_FLAG_INTRA_VLC 0x0010 +#define V4L2_MPEG2_PIC_FLAG_ALT_SCAN 0x0020 +#define V4L2_MPEG2_PIC_FLAG_REPEAT_FIRST 0x0040 +#define V4L2_MPEG2_PIC_FLAG_PROGRESSIVE 0x0080 + +#define V4L2_CID_STATELESS_MPEG2_PICTURE (V4L2_CID_CODEC_STATELESS_BASE+221) +/** + * struct v4l2_ctrl_mpeg2_picture - MPEG-2 picture header + * + * All the members on this structure match the picture header and picture + * coding extension syntaxes as specified by the MPEG-2 specification. + * + * @backward_ref_ts: timestamp of the V4L2 capture buffer to use as + * reference for backward prediction. + * @forward_ref_ts: timestamp of the V4L2 capture buffer to use as + * reference for forward prediction. These timestamp refers to the + * timestamp field in struct v4l2_buffer. Use v4l2_timeval_to_ns() + * to convert the struct timeval to a __u64. + * @flags: see V4L2_MPEG2_PIC_FLAG_{}. + * @f_code: see MPEG-2 specification. + * @picture_coding_type: see MPEG-2 specification. + * @picture_structure: see V4L2_MPEG2_PIC_{}_FIELD. + * @intra_dc_precision: see MPEG-2 specification. + * @reserved: padding field. Should be zeroed by applications. + */ +struct v4l2_ctrl_mpeg2_picture { + __u64 backward_ref_ts; + __u64 forward_ref_ts; + __u32 flags; + __u8 f_code[2][2]; + __u8 picture_coding_type; + __u8 picture_structure; + __u8 intra_dc_precision; + __u8 reserved[5]; +}; + +#define V4L2_CID_STATELESS_MPEG2_QUANTISATION (V4L2_CID_CODEC_STATELESS_BASE+222) +/** + * struct v4l2_ctrl_mpeg2_quantisation - MPEG-2 quantisation + * + * Quantisation matrices as specified by section 6.3.7 + * "Quant matrix extension". + * + * @intra_quantiser_matrix: The quantisation matrix coefficients + * for intra-coded frames, in zigzag scanning order. It is relevant + * for both luma and chroma components, although it can be superseded + * by the chroma-specific matrix for non-4:2:0 YUV formats. + * @non_intra_quantiser_matrix: The quantisation matrix coefficients + * for non-intra-coded frames, in zigzag scanning order. It is relevant + * for both luma and chroma components, although it can be superseded + * by the chroma-specific matrix for non-4:2:0 YUV formats. + * @chroma_intra_quantiser_matrix: The quantisation matrix coefficients + * for the chominance component of intra-coded frames, in zigzag scanning + * order. Only relevant for 4:2:2 and 4:4:4 YUV formats. + * @chroma_non_intra_quantiser_matrix: The quantisation matrix coefficients + * for the chrominance component of non-intra-coded frames, in zigzag scanning + * order. Only relevant for 4:2:2 and 4:4:4 YUV formats. + */ +struct v4l2_ctrl_mpeg2_quantisation { + __u8 intra_quantiser_matrix[64]; + __u8 non_intra_quantiser_matrix[64]; + __u8 chroma_intra_quantiser_matrix[64]; + __u8 chroma_non_intra_quantiser_matrix[64]; +}; + +#define V4L2_CID_STATELESS_HEVC_SPS (V4L2_CID_CODEC_STATELESS_BASE + 400) +#define V4L2_CID_STATELESS_HEVC_PPS (V4L2_CID_CODEC_STATELESS_BASE + 401) +#define V4L2_CID_STATELESS_HEVC_SLICE_PARAMS (V4L2_CID_CODEC_STATELESS_BASE + 402) +#define V4L2_CID_STATELESS_HEVC_SCALING_MATRIX (V4L2_CID_CODEC_STATELESS_BASE + 403) +#define V4L2_CID_STATELESS_HEVC_DECODE_PARAMS (V4L2_CID_CODEC_STATELESS_BASE + 404) +#define V4L2_CID_STATELESS_HEVC_DECODE_MODE (V4L2_CID_CODEC_STATELESS_BASE + 405) +#define V4L2_CID_STATELESS_HEVC_START_CODE (V4L2_CID_CODEC_STATELESS_BASE + 406) +#define V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS (V4L2_CID_CODEC_STATELESS_BASE + 407) + +enum v4l2_stateless_hevc_decode_mode { + V4L2_STATELESS_HEVC_DECODE_MODE_SLICE_BASED, + V4L2_STATELESS_HEVC_DECODE_MODE_FRAME_BASED, +}; + +enum v4l2_stateless_hevc_start_code { + V4L2_STATELESS_HEVC_START_CODE_NONE, + V4L2_STATELESS_HEVC_START_CODE_ANNEX_B, +}; + +#define V4L2_HEVC_SLICE_TYPE_B 0 +#define V4L2_HEVC_SLICE_TYPE_P 1 +#define V4L2_HEVC_SLICE_TYPE_I 2 + +#define V4L2_HEVC_SPS_FLAG_SEPARATE_COLOUR_PLANE (1ULL << 0) +#define V4L2_HEVC_SPS_FLAG_SCALING_LIST_ENABLED (1ULL << 1) +#define V4L2_HEVC_SPS_FLAG_AMP_ENABLED (1ULL << 2) +#define V4L2_HEVC_SPS_FLAG_SAMPLE_ADAPTIVE_OFFSET (1ULL << 3) +#define V4L2_HEVC_SPS_FLAG_PCM_ENABLED (1ULL << 4) +#define V4L2_HEVC_SPS_FLAG_PCM_LOOP_FILTER_DISABLED (1ULL << 5) +#define V4L2_HEVC_SPS_FLAG_LONG_TERM_REF_PICS_PRESENT (1ULL << 6) +#define V4L2_HEVC_SPS_FLAG_SPS_TEMPORAL_MVP_ENABLED (1ULL << 7) +#define V4L2_HEVC_SPS_FLAG_STRONG_INTRA_SMOOTHING_ENABLED (1ULL << 8) + +/** + * struct v4l2_ctrl_hevc_sps - ITU-T Rec. H.265: Sequence parameter set + * + * @video_parameter_set_id: specifies the value of the + * vps_video_parameter_set_id of the active VPS + * @seq_parameter_set_id: provides an identifier for the SPS for + * reference by other syntax elements + * @pic_width_in_luma_samples: specifies the width of each decoded picture + * in units of luma samples + * @pic_height_in_luma_samples: specifies the height of each decoded picture + * in units of luma samples + * @bit_depth_luma_minus8: this value plus 8specifies the bit depth of the + * samples of the luma array + * @bit_depth_chroma_minus8: this value plus 8 specifies the bit depth of the + * samples of the chroma arrays + * @log2_max_pic_order_cnt_lsb_minus4: this value plus 4 specifies the value of + * the variable MaxPicOrderCntLsb + * @sps_max_dec_pic_buffering_minus1: this value plus 1 specifies the maximum + * required size of the decoded picture + * buffer for the codec video sequence + * @sps_max_num_reorder_pics: indicates the maximum allowed number of pictures + * @sps_max_latency_increase_plus1: not equal to 0 is used to compute the + * value of SpsMaxLatencyPictures array + * @log2_min_luma_coding_block_size_minus3: plus 3 specifies the minimum + * luma coding block size + * @log2_diff_max_min_luma_coding_block_size: specifies the difference between + * the maximum and minimum luma + * coding block size + * @log2_min_luma_transform_block_size_minus2: plus 2 specifies the minimum luma + * transform block size + * @log2_diff_max_min_luma_transform_block_size: specifies the difference between + * the maximum and minimum luma + * transform block size + * @max_transform_hierarchy_depth_inter: specifies the maximum hierarchy + * depth for transform units of + * coding units coded in inter + * prediction mode + * @max_transform_hierarchy_depth_intra: specifies the maximum hierarchy + * depth for transform units of + * coding units coded in intra + * prediction mode + * @pcm_sample_bit_depth_luma_minus1: this value plus 1 specifies the number of + * bits used to represent each of PCM sample + * values of the luma component + * @pcm_sample_bit_depth_chroma_minus1: this value plus 1 specifies the number + * of bits used to represent each of PCM + * sample values of the chroma components + * @log2_min_pcm_luma_coding_block_size_minus3: this value plus 3 specifies the + * minimum size of coding blocks + * @log2_diff_max_min_pcm_luma_coding_block_size: specifies the difference between + * the maximum and minimum size of + * coding blocks + * @num_short_term_ref_pic_sets: specifies the number of st_ref_pic_set() + * syntax structures included in the SPS + * @num_long_term_ref_pics_sps: specifies the number of candidate long-term + * reference pictures that are specified in the SPS + * @chroma_format_idc: specifies the chroma sampling + * @sps_max_sub_layers_minus1: this value plus 1 specifies the maximum number + * of temporal sub-layers + * @reserved: padding field. Should be zeroed by applications. + * @flags: see V4L2_HEVC_SPS_FLAG_{} + */ +struct v4l2_ctrl_hevc_sps { + __u8 video_parameter_set_id; + __u8 seq_parameter_set_id; + __u16 pic_width_in_luma_samples; + __u16 pic_height_in_luma_samples; + __u8 bit_depth_luma_minus8; + __u8 bit_depth_chroma_minus8; + __u8 log2_max_pic_order_cnt_lsb_minus4; + __u8 sps_max_dec_pic_buffering_minus1; + __u8 sps_max_num_reorder_pics; + __u8 sps_max_latency_increase_plus1; + __u8 log2_min_luma_coding_block_size_minus3; + __u8 log2_diff_max_min_luma_coding_block_size; + __u8 log2_min_luma_transform_block_size_minus2; + __u8 log2_diff_max_min_luma_transform_block_size; + __u8 max_transform_hierarchy_depth_inter; + __u8 max_transform_hierarchy_depth_intra; + __u8 pcm_sample_bit_depth_luma_minus1; + __u8 pcm_sample_bit_depth_chroma_minus1; + __u8 log2_min_pcm_luma_coding_block_size_minus3; + __u8 log2_diff_max_min_pcm_luma_coding_block_size; + __u8 num_short_term_ref_pic_sets; + __u8 num_long_term_ref_pics_sps; + __u8 chroma_format_idc; + __u8 sps_max_sub_layers_minus1; + + __u8 reserved[6]; + __u64 flags; +}; + +#define V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT_ENABLED (1ULL << 0) +#define V4L2_HEVC_PPS_FLAG_OUTPUT_FLAG_PRESENT (1ULL << 1) +#define V4L2_HEVC_PPS_FLAG_SIGN_DATA_HIDING_ENABLED (1ULL << 2) +#define V4L2_HEVC_PPS_FLAG_CABAC_INIT_PRESENT (1ULL << 3) +#define V4L2_HEVC_PPS_FLAG_CONSTRAINED_INTRA_PRED (1ULL << 4) +#define V4L2_HEVC_PPS_FLAG_TRANSFORM_SKIP_ENABLED (1ULL << 5) +#define V4L2_HEVC_PPS_FLAG_CU_QP_DELTA_ENABLED (1ULL << 6) +#define V4L2_HEVC_PPS_FLAG_PPS_SLICE_CHROMA_QP_OFFSETS_PRESENT (1ULL << 7) +#define V4L2_HEVC_PPS_FLAG_WEIGHTED_PRED (1ULL << 8) +#define V4L2_HEVC_PPS_FLAG_WEIGHTED_BIPRED (1ULL << 9) +#define V4L2_HEVC_PPS_FLAG_TRANSQUANT_BYPASS_ENABLED (1ULL << 10) +#define V4L2_HEVC_PPS_FLAG_TILES_ENABLED (1ULL << 11) +#define V4L2_HEVC_PPS_FLAG_ENTROPY_CODING_SYNC_ENABLED (1ULL << 12) +#define V4L2_HEVC_PPS_FLAG_LOOP_FILTER_ACROSS_TILES_ENABLED (1ULL << 13) +#define V4L2_HEVC_PPS_FLAG_PPS_LOOP_FILTER_ACROSS_SLICES_ENABLED (1ULL << 14) +#define V4L2_HEVC_PPS_FLAG_DEBLOCKING_FILTER_OVERRIDE_ENABLED (1ULL << 15) +#define V4L2_HEVC_PPS_FLAG_PPS_DISABLE_DEBLOCKING_FILTER (1ULL << 16) +#define V4L2_HEVC_PPS_FLAG_LISTS_MODIFICATION_PRESENT (1ULL << 17) +#define V4L2_HEVC_PPS_FLAG_SLICE_SEGMENT_HEADER_EXTENSION_PRESENT (1ULL << 18) +#define V4L2_HEVC_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT (1ULL << 19) +#define V4L2_HEVC_PPS_FLAG_UNIFORM_SPACING (1ULL << 20) + +/** + * struct v4l2_ctrl_hevc_pps - ITU-T Rec. H.265: Picture parameter set + * + * @pic_parameter_set_id: identifies the PPS for reference by other + * syntax elements + * @num_extra_slice_header_bits: specifies the number of extra slice header + * bits that are present in the slice header RBSP + * for coded pictures referring to the PPS. + * @num_ref_idx_l0_default_active_minus1: this value plus 1 specifies the + * inferred value of num_ref_idx_l0_active_minus1 + * @num_ref_idx_l1_default_active_minus1: this value plus 1 specifies the + * inferred value of num_ref_idx_l1_active_minus1 + * @init_qp_minus26: this value plus 26 specifies the initial value of SliceQp Y for + * each slice referring to the PPS + * @diff_cu_qp_delta_depth: specifies the difference between the luma coding + * tree block size and the minimum luma coding block + * size of coding units that convey cu_qp_delta_abs + * and cu_qp_delta_sign_flag + * @pps_cb_qp_offset: specify the offsets to the luma quantization parameter Cb + * @pps_cr_qp_offset: specify the offsets to the luma quantization parameter Cr + * @num_tile_columns_minus1: this value plus 1 specifies the number of tile columns + * partitioning the picture + * @num_tile_rows_minus1: this value plus 1 specifies the number of tile rows partitioning + * the picture + * @column_width_minus1: this value plus 1 specifies the width of the each tile column in + * units of coding tree blocks + * @row_height_minus1: this value plus 1 specifies the height of the each tile row in + * units of coding tree blocks + * @pps_beta_offset_div2: specify the default deblocking parameter offsets for + * beta divided by 2 + * @pps_tc_offset_div2: specify the default deblocking parameter offsets for tC + * divided by 2 + * @log2_parallel_merge_level_minus2: this value plus 2 specifies the value of + * the variable Log2ParMrgLevel + * @reserved: padding field. Should be zeroed by applications. + * @flags: see V4L2_HEVC_PPS_FLAG_{} + */ +struct v4l2_ctrl_hevc_pps { + __u8 pic_parameter_set_id; + __u8 num_extra_slice_header_bits; + __u8 num_ref_idx_l0_default_active_minus1; + __u8 num_ref_idx_l1_default_active_minus1; + __s8 init_qp_minus26; + __u8 diff_cu_qp_delta_depth; + __s8 pps_cb_qp_offset; + __s8 pps_cr_qp_offset; + __u8 num_tile_columns_minus1; + __u8 num_tile_rows_minus1; + __u8 column_width_minus1[20]; + __u8 row_height_minus1[22]; + __s8 pps_beta_offset_div2; + __s8 pps_tc_offset_div2; + __u8 log2_parallel_merge_level_minus2; + __u8 reserved; + __u64 flags; +}; + +#define V4L2_HEVC_DPB_ENTRY_LONG_TERM_REFERENCE 0x01 + +#define V4L2_HEVC_SEI_PIC_STRUCT_FRAME 0 +#define V4L2_HEVC_SEI_PIC_STRUCT_TOP_FIELD 1 +#define V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_FIELD 2 +#define V4L2_HEVC_SEI_PIC_STRUCT_TOP_BOTTOM 3 +#define V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_TOP 4 +#define V4L2_HEVC_SEI_PIC_STRUCT_TOP_BOTTOM_TOP 5 +#define V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_TOP_BOTTOM 6 +#define V4L2_HEVC_SEI_PIC_STRUCT_FRAME_DOUBLING 7 +#define V4L2_HEVC_SEI_PIC_STRUCT_FRAME_TRIPLING 8 +#define V4L2_HEVC_SEI_PIC_STRUCT_TOP_PAIRED_PREVIOUS_BOTTOM 9 +#define V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_PAIRED_PREVIOUS_TOP 10 +#define V4L2_HEVC_SEI_PIC_STRUCT_TOP_PAIRED_NEXT_BOTTOM 11 +#define V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_PAIRED_NEXT_TOP 12 + +#define V4L2_HEVC_DPB_ENTRIES_NUM_MAX 16 + +/** + * struct v4l2_hevc_dpb_entry - HEVC decoded picture buffer entry + * + * @timestamp: timestamp of the V4L2 capture buffer to use as reference. + * @flags: long term flag for the reference frame + * @field_pic: whether the reference is a field picture or a frame. + * @reserved: padding field. Should be zeroed by applications. + * @pic_order_cnt_val: the picture order count of the current picture. + */ +struct v4l2_hevc_dpb_entry { + __u64 timestamp; + __u8 flags; + __u8 field_pic; + __u16 reserved; + __s32 pic_order_cnt_val; +}; + +/** + * struct v4l2_hevc_pred_weight_table - HEVC weighted prediction parameters + * + * @delta_luma_weight_l0: the difference of the weighting factor applied + * to the luma prediction value for list 0 + * @luma_offset_l0: the additive offset applied to the luma prediction value + * for list 0 + * @delta_chroma_weight_l0: the difference of the weighting factor applied + * to the chroma prediction values for list 0 + * @chroma_offset_l0: the difference of the additive offset applied to + * the chroma prediction values for list 0 + * @delta_luma_weight_l1: the difference of the weighting factor applied + * to the luma prediction value for list 1 + * @luma_offset_l1: the additive offset applied to the luma prediction value + * for list 1 + * @delta_chroma_weight_l1: the difference of the weighting factor applied + * to the chroma prediction values for list 1 + * @chroma_offset_l1: the difference of the additive offset applied to + * the chroma prediction values for list 1 + * @luma_log2_weight_denom: the base 2 logarithm of the denominator for + * all luma weighting factors + * @delta_chroma_log2_weight_denom: the difference of the base 2 logarithm + * of the denominator for all chroma + * weighting factors + */ +struct v4l2_hevc_pred_weight_table { + __s8 delta_luma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]; + __s8 luma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]; + __s8 delta_chroma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]; + __s8 chroma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]; + + __s8 delta_luma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]; + __s8 luma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]; + __s8 delta_chroma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]; + __s8 chroma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]; + + __u8 luma_log2_weight_denom; + __s8 delta_chroma_log2_weight_denom; +}; + +#define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_LUMA (1ULL << 0) +#define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_CHROMA (1ULL << 1) +#define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_TEMPORAL_MVP_ENABLED (1ULL << 2) +#define V4L2_HEVC_SLICE_PARAMS_FLAG_MVD_L1_ZERO (1ULL << 3) +#define V4L2_HEVC_SLICE_PARAMS_FLAG_CABAC_INIT (1ULL << 4) +#define V4L2_HEVC_SLICE_PARAMS_FLAG_COLLOCATED_FROM_L0 (1ULL << 5) +#define V4L2_HEVC_SLICE_PARAMS_FLAG_USE_INTEGER_MV (1ULL << 6) +#define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_DEBLOCKING_FILTER_DISABLED (1ULL << 7) +#define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_LOOP_FILTER_ACROSS_SLICES_ENABLED (1ULL << 8) +#define V4L2_HEVC_SLICE_PARAMS_FLAG_DEPENDENT_SLICE_SEGMENT (1ULL << 9) + +/** + * struct v4l2_ctrl_hevc_slice_params - HEVC slice parameters + * + * This control is a dynamically sized 1-dimensional array, + * V4L2_CTRL_FLAG_DYNAMIC_ARRAY flag must be set when using it. + * + * @bit_size: size (in bits) of the current slice data + * @data_byte_offset: offset (in bytes) to the video data in the current slice data + * @num_entry_point_offsets: specifies the number of entry point offset syntax + * elements in the slice header. + * @nal_unit_type: specifies the coding type of the slice (B, P or I) + * @nuh_temporal_id_plus1: minus 1 specifies a temporal identifier for the NAL unit + * @slice_type: see V4L2_HEVC_SLICE_TYPE_{} + * @colour_plane_id: specifies the colour plane associated with the current slice + * @slice_pic_order_cnt: specifies the picture order count + * @num_ref_idx_l0_active_minus1: this value plus 1 specifies the maximum + * reference index for reference picture list 0 + * that may be used to decode the slice + * @num_ref_idx_l1_active_minus1: this value plus 1 specifies the maximum + * reference index for reference picture list 1 + * that may be used to decode the slice + * @collocated_ref_idx: specifies the reference index of the collocated picture used + * for temporal motion vector prediction + * @five_minus_max_num_merge_cand: specifies the maximum number of merging + * motion vector prediction candidates supported in + * the slice subtracted from 5 + * @slice_qp_delta: specifies the initial value of QpY to be used for the coding + * blocks in the slice + * @slice_cb_qp_offset: specifies a difference to be added to the value of pps_cb_qp_offset + * @slice_cr_qp_offset: specifies a difference to be added to the value of pps_cr_qp_offset + * @slice_act_y_qp_offset: screen content extension parameters + * @slice_act_cb_qp_offset: screen content extension parameters + * @slice_act_cr_qp_offset: screen content extension parameters + * @slice_beta_offset_div2: specify the deblocking parameter offsets for beta divided by 2 + * @slice_tc_offset_div2: specify the deblocking parameter offsets for tC divided by 2 + * @pic_struct: indicates whether a picture should be displayed as a frame or as one or + * more fields + * @reserved0: padding field. Should be zeroed by applications. + * @slice_segment_addr: specifies the address of the first coding tree block in + * the slice segment + * @ref_idx_l0: the list of L0 reference elements as indices in the DPB + * @ref_idx_l1: the list of L1 reference elements as indices in the DPB + * @short_term_ref_pic_set_size: specifies the size of short-term reference + * pictures set included in the SPS + * @long_term_ref_pic_set_size: specifies the size of long-term reference + * pictures set include in the SPS + * @pred_weight_table: the prediction weight coefficients for inter-picture + * prediction + * @reserved1: padding field. Should be zeroed by applications. + * @flags: see V4L2_HEVC_SLICE_PARAMS_FLAG_{} + */ +struct v4l2_ctrl_hevc_slice_params { + __u32 bit_size; + __u32 data_byte_offset; + __u32 num_entry_point_offsets; + + /* ISO/IEC 23008-2, ITU-T Rec. H.265: NAL unit header */ + __u8 nal_unit_type; + __u8 nuh_temporal_id_plus1; + + /* ISO/IEC 23008-2, ITU-T Rec. H.265: General slice segment header */ + __u8 slice_type; + __u8 colour_plane_id; + __s32 slice_pic_order_cnt; + __u8 num_ref_idx_l0_active_minus1; + __u8 num_ref_idx_l1_active_minus1; + __u8 collocated_ref_idx; + __u8 five_minus_max_num_merge_cand; + __s8 slice_qp_delta; + __s8 slice_cb_qp_offset; + __s8 slice_cr_qp_offset; + __s8 slice_act_y_qp_offset; + __s8 slice_act_cb_qp_offset; + __s8 slice_act_cr_qp_offset; + __s8 slice_beta_offset_div2; + __s8 slice_tc_offset_div2; + + /* ISO/IEC 23008-2, ITU-T Rec. H.265: Picture timing SEI message */ + __u8 pic_struct; + + __u8 reserved0[3]; + /* ISO/IEC 23008-2, ITU-T Rec. H.265: General slice segment header */ + __u32 slice_segment_addr; + __u8 ref_idx_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]; + __u8 ref_idx_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]; + __u16 short_term_ref_pic_set_size; + __u16 long_term_ref_pic_set_size; + + /* ISO/IEC 23008-2, ITU-T Rec. H.265: Weighted prediction parameter */ + struct v4l2_hevc_pred_weight_table pred_weight_table; + + __u8 reserved1[2]; + __u64 flags; +}; + +#define V4L2_HEVC_DECODE_PARAM_FLAG_IRAP_PIC 0x1 +#define V4L2_HEVC_DECODE_PARAM_FLAG_IDR_PIC 0x2 +#define V4L2_HEVC_DECODE_PARAM_FLAG_NO_OUTPUT_OF_PRIOR 0x4 + +/** + * struct v4l2_ctrl_hevc_decode_params - HEVC decode parameters + * + * @pic_order_cnt_val: picture order count + * @short_term_ref_pic_set_size: specifies the size of short-term reference + * pictures set included in the SPS of the first slice + * @long_term_ref_pic_set_size: specifies the size of long-term reference + * pictures set include in the SPS of the first slice + * @num_active_dpb_entries: the number of entries in dpb + * @num_poc_st_curr_before: the number of reference pictures in the short-term + * set that come before the current frame + * @num_poc_st_curr_after: the number of reference pictures in the short-term + * set that come after the current frame + * @num_poc_lt_curr: the number of reference pictures in the long-term set + * @poc_st_curr_before: provides the index of the short term before references + * in DPB array + * @poc_st_curr_after: provides the index of the short term after references + * in DPB array + * @poc_lt_curr: provides the index of the long term references in DPB array + * @num_delta_pocs_of_ref_rps_idx: same as the derived value NumDeltaPocs[RefRpsIdx], + * can be used to parse the RPS data in slice headers + * instead of skipping it with @short_term_ref_pic_set_size. + * @reserved: padding field. Should be zeroed by applications. + * @dpb: the decoded picture buffer, for meta-data about reference frames + * @flags: see V4L2_HEVC_DECODE_PARAM_FLAG_{} + */ +struct v4l2_ctrl_hevc_decode_params { + __s32 pic_order_cnt_val; + __u16 short_term_ref_pic_set_size; + __u16 long_term_ref_pic_set_size; + __u8 num_active_dpb_entries; + __u8 num_poc_st_curr_before; + __u8 num_poc_st_curr_after; + __u8 num_poc_lt_curr; + __u8 poc_st_curr_before[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]; + __u8 poc_st_curr_after[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]; + __u8 poc_lt_curr[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]; + __u8 num_delta_pocs_of_ref_rps_idx; + __u8 reserved[3]; + struct v4l2_hevc_dpb_entry dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]; + __u64 flags; +}; + +/** + * struct v4l2_ctrl_hevc_scaling_matrix - HEVC scaling lists parameters + * + * @scaling_list_4x4: scaling list is used for the scaling process for + * transform coefficients. The values on each scaling + * list are expected in raster scan order + * @scaling_list_8x8: scaling list is used for the scaling process for + * transform coefficients. The values on each scaling + * list are expected in raster scan order + * @scaling_list_16x16: scaling list is used for the scaling process for + * transform coefficients. The values on each scaling + * list are expected in raster scan order + * @scaling_list_32x32: scaling list is used for the scaling process for + * transform coefficients. The values on each scaling + * list are expected in raster scan order + * @scaling_list_dc_coef_16x16: scaling list is used for the scaling process + * for transform coefficients. The values on each + * scaling list are expected in raster scan order. + * @scaling_list_dc_coef_32x32: scaling list is used for the scaling process + * for transform coefficients. The values on each + * scaling list are expected in raster scan order. + */ +struct v4l2_ctrl_hevc_scaling_matrix { + __u8 scaling_list_4x4[6][16]; + __u8 scaling_list_8x8[6][64]; + __u8 scaling_list_16x16[6][64]; + __u8 scaling_list_32x32[2][64]; + __u8 scaling_list_dc_coef_16x16[6]; + __u8 scaling_list_dc_coef_32x32[2]; +}; + +#define V4L2_CID_COLORIMETRY_CLASS_BASE (V4L2_CTRL_CLASS_COLORIMETRY | 0x900) +#define V4L2_CID_COLORIMETRY_CLASS (V4L2_CTRL_CLASS_COLORIMETRY | 1) + +#define V4L2_CID_COLORIMETRY_HDR10_CLL_INFO (V4L2_CID_COLORIMETRY_CLASS_BASE + 0) + +struct v4l2_ctrl_hdr10_cll_info { + __u16 max_content_light_level; + __u16 max_pic_average_light_level; +}; + +#define V4L2_CID_COLORIMETRY_HDR10_MASTERING_DISPLAY (V4L2_CID_COLORIMETRY_CLASS_BASE + 1) + +#define V4L2_HDR10_MASTERING_PRIMARIES_X_LOW 5 +#define V4L2_HDR10_MASTERING_PRIMARIES_X_HIGH 37000 +#define V4L2_HDR10_MASTERING_PRIMARIES_Y_LOW 5 +#define V4L2_HDR10_MASTERING_PRIMARIES_Y_HIGH 42000 +#define V4L2_HDR10_MASTERING_WHITE_POINT_X_LOW 5 +#define V4L2_HDR10_MASTERING_WHITE_POINT_X_HIGH 37000 +#define V4L2_HDR10_MASTERING_WHITE_POINT_Y_LOW 5 +#define V4L2_HDR10_MASTERING_WHITE_POINT_Y_HIGH 42000 +#define V4L2_HDR10_MASTERING_MAX_LUMA_LOW 50000 +#define V4L2_HDR10_MASTERING_MAX_LUMA_HIGH 100000000 +#define V4L2_HDR10_MASTERING_MIN_LUMA_LOW 1 +#define V4L2_HDR10_MASTERING_MIN_LUMA_HIGH 50000 + +struct v4l2_ctrl_hdr10_mastering_display { + __u16 display_primaries_x[3]; + __u16 display_primaries_y[3]; + __u16 white_point_x; + __u16 white_point_y; + __u32 max_display_mastering_luminance; + __u32 min_display_mastering_luminance; +}; + +/* Stateless VP9 controls */ + +#define V4L2_VP9_LOOP_FILTER_FLAG_DELTA_ENABLED 0x1 +#define V4L2_VP9_LOOP_FILTER_FLAG_DELTA_UPDATE 0x2 + +/** + * struct v4l2_vp9_loop_filter - VP9 loop filter parameters + * + * @ref_deltas: contains the adjustment needed for the filter level based on the + * chosen reference frame. If this syntax element is not present in the bitstream, + * users should pass its last value. + * @mode_deltas: contains the adjustment needed for the filter level based on the + * chosen mode. If this syntax element is not present in the bitstream, users should + * pass its last value. + * @level: indicates the loop filter strength. + * @sharpness: indicates the sharpness level. + * @flags: combination of V4L2_VP9_LOOP_FILTER_FLAG_{} flags. + * @reserved: padding field. Should be zeroed by applications. + * + * This structure contains all loop filter related parameters. See sections + * '7.2.8 Loop filter semantics' of the VP9 specification for more details. + */ +struct v4l2_vp9_loop_filter { + __s8 ref_deltas[4]; + __s8 mode_deltas[2]; + __u8 level; + __u8 sharpness; + __u8 flags; + __u8 reserved[7]; +}; + +/** + * struct v4l2_vp9_quantization - VP9 quantization parameters + * + * @base_q_idx: indicates the base frame qindex. + * @delta_q_y_dc: indicates the Y DC quantizer relative to base_q_idx. + * @delta_q_uv_dc: indicates the UV DC quantizer relative to base_q_idx. + * @delta_q_uv_ac: indicates the UV AC quantizer relative to base_q_idx. + * @reserved: padding field. Should be zeroed by applications. + * + * Encodes the quantization parameters. See section '7.2.9 Quantization params + * syntax' of the VP9 specification for more details. + */ +struct v4l2_vp9_quantization { + __u8 base_q_idx; + __s8 delta_q_y_dc; + __s8 delta_q_uv_dc; + __s8 delta_q_uv_ac; + __u8 reserved[4]; +}; + +#define V4L2_VP9_SEGMENTATION_FLAG_ENABLED 0x01 +#define V4L2_VP9_SEGMENTATION_FLAG_UPDATE_MAP 0x02 +#define V4L2_VP9_SEGMENTATION_FLAG_TEMPORAL_UPDATE 0x04 +#define V4L2_VP9_SEGMENTATION_FLAG_UPDATE_DATA 0x08 +#define V4L2_VP9_SEGMENTATION_FLAG_ABS_OR_DELTA_UPDATE 0x10 + +#define V4L2_VP9_SEG_LVL_ALT_Q 0 +#define V4L2_VP9_SEG_LVL_ALT_L 1 +#define V4L2_VP9_SEG_LVL_REF_FRAME 2 +#define V4L2_VP9_SEG_LVL_SKIP 3 +#define V4L2_VP9_SEG_LVL_MAX 4 + +#define V4L2_VP9_SEGMENT_FEATURE_ENABLED(id) (1 << (id)) +#define V4L2_VP9_SEGMENT_FEATURE_ENABLED_MASK 0xf + +/** + * struct v4l2_vp9_segmentation - VP9 segmentation parameters + * + * @feature_data: data attached to each feature. Data entry is only valid if + * the feature is enabled. The array shall be indexed with segment number as + * the first dimension (0..7) and one of V4L2_VP9_SEG_{} as the second dimension. + * @feature_enabled: bitmask defining which features are enabled in each segment. + * The value for each segment is a combination of V4L2_VP9_SEGMENT_FEATURE_ENABLED(id) + * values where id is one of V4L2_VP9_SEG_LVL_{}. + * @tree_probs: specifies the probability values to be used when decoding a + * Segment-ID. See '5.15. Segmentation map' section of the VP9 specification + * for more details. + * @pred_probs: specifies the probability values to be used when decoding a + * Predicted-Segment-ID. See '6.4.14. Get segment id syntax' section of :ref:`vp9` + * for more details. + * @flags: combination of V4L2_VP9_SEGMENTATION_FLAG_{} flags. + * @reserved: padding field. Should be zeroed by applications. + * + * Encodes the quantization parameters. See section '7.2.10 Segmentation params syntax' of + * the VP9 specification for more details. + */ +struct v4l2_vp9_segmentation { + __s16 feature_data[8][4]; + __u8 feature_enabled[8]; + __u8 tree_probs[7]; + __u8 pred_probs[3]; + __u8 flags; + __u8 reserved[5]; +}; + +#define V4L2_VP9_FRAME_FLAG_KEY_FRAME 0x001 +#define V4L2_VP9_FRAME_FLAG_SHOW_FRAME 0x002 +#define V4L2_VP9_FRAME_FLAG_ERROR_RESILIENT 0x004 +#define V4L2_VP9_FRAME_FLAG_INTRA_ONLY 0x008 +#define V4L2_VP9_FRAME_FLAG_ALLOW_HIGH_PREC_MV 0x010 +#define V4L2_VP9_FRAME_FLAG_REFRESH_FRAME_CTX 0x020 +#define V4L2_VP9_FRAME_FLAG_PARALLEL_DEC_MODE 0x040 +#define V4L2_VP9_FRAME_FLAG_X_SUBSAMPLING 0x080 +#define V4L2_VP9_FRAME_FLAG_Y_SUBSAMPLING 0x100 +#define V4L2_VP9_FRAME_FLAG_COLOR_RANGE_FULL_SWING 0x200 + +#define V4L2_VP9_SIGN_BIAS_LAST 0x1 +#define V4L2_VP9_SIGN_BIAS_GOLDEN 0x2 +#define V4L2_VP9_SIGN_BIAS_ALT 0x4 + +#define V4L2_VP9_RESET_FRAME_CTX_NONE 0 +#define V4L2_VP9_RESET_FRAME_CTX_SPEC 1 +#define V4L2_VP9_RESET_FRAME_CTX_ALL 2 + +#define V4L2_VP9_INTERP_FILTER_EIGHTTAP 0 +#define V4L2_VP9_INTERP_FILTER_EIGHTTAP_SMOOTH 1 +#define V4L2_VP9_INTERP_FILTER_EIGHTTAP_SHARP 2 +#define V4L2_VP9_INTERP_FILTER_BILINEAR 3 +#define V4L2_VP9_INTERP_FILTER_SWITCHABLE 4 + +#define V4L2_VP9_REFERENCE_MODE_SINGLE_REFERENCE 0 +#define V4L2_VP9_REFERENCE_MODE_COMPOUND_REFERENCE 1 +#define V4L2_VP9_REFERENCE_MODE_SELECT 2 + +#define V4L2_VP9_PROFILE_MAX 3 + +#define V4L2_CID_STATELESS_VP9_FRAME (V4L2_CID_CODEC_STATELESS_BASE + 300) +/** + * struct v4l2_ctrl_vp9_frame - VP9 frame decoding control + * + * @lf: loop filter parameters. See &v4l2_vp9_loop_filter for more details. + * @quant: quantization parameters. See &v4l2_vp9_quantization for more details. + * @seg: segmentation parameters. See &v4l2_vp9_segmentation for more details. + * @flags: combination of V4L2_VP9_FRAME_FLAG_{} flags. + * @compressed_header_size: compressed header size in bytes. + * @uncompressed_header_size: uncompressed header size in bytes. + * @frame_width_minus_1: add 1 to it and you'll get the frame width expressed in pixels. + * @frame_height_minus_1: add 1 to it and you'll get the frame height expressed in pixels. + * @render_width_minus_1: add 1 to it and you'll get the expected render width expressed in + * pixels. This is not used during the decoding process but might be used by HW scalers + * to prepare a frame that's ready for scanout. + * @render_height_minus_1: add 1 to it and you'll get the expected render height expressed in + * pixels. This is not used during the decoding process but might be used by HW scalers + * to prepare a frame that's ready for scanout. + * @last_frame_ts: "last" reference buffer timestamp. + * The timestamp refers to the timestamp field in struct v4l2_buffer. + * Use v4l2_timeval_to_ns() to convert the struct timeval to a __u64. + * @golden_frame_ts: "golden" reference buffer timestamp. + * The timestamp refers to the timestamp field in struct v4l2_buffer. + * Use v4l2_timeval_to_ns() to convert the struct timeval to a __u64. + * @alt_frame_ts: "alt" reference buffer timestamp. + * The timestamp refers to the timestamp field in struct v4l2_buffer. + * Use v4l2_timeval_to_ns() to convert the struct timeval to a __u64. + * @ref_frame_sign_bias: a bitfield specifying whether the sign bias is set for a given + * reference frame. Either of V4L2_VP9_SIGN_BIAS_{}. + * @reset_frame_context: specifies whether the frame context should be reset to default values. + * Either of V4L2_VP9_RESET_FRAME_CTX_{}. + * @frame_context_idx: frame context that should be used/updated. + * @profile: VP9 profile. Can be 0, 1, 2 or 3. + * @bit_depth: bits per components. Can be 8, 10 or 12. Note that not all profiles support + * 10 and/or 12 bits depths. + * @interpolation_filter: specifies the filter selection used for performing inter prediction. + * Set to one of V4L2_VP9_INTERP_FILTER_{}. + * @tile_cols_log2: specifies the base 2 logarithm of the width of each tile (where the width + * is measured in units of 8x8 blocks). Shall be less than or equal to 6. + * @tile_rows_log2: specifies the base 2 logarithm of the height of each tile (where the height + * is measured in units of 8x8 blocks). + * @reference_mode: specifies the type of inter prediction to be used. + * Set to one of V4L2_VP9_REFERENCE_MODE_{}. + * @reserved: padding field. Should be zeroed by applications. + */ +struct v4l2_ctrl_vp9_frame { + struct v4l2_vp9_loop_filter lf; + struct v4l2_vp9_quantization quant; + struct v4l2_vp9_segmentation seg; + __u32 flags; + __u16 compressed_header_size; + __u16 uncompressed_header_size; + __u16 frame_width_minus_1; + __u16 frame_height_minus_1; + __u16 render_width_minus_1; + __u16 render_height_minus_1; + __u64 last_frame_ts; + __u64 golden_frame_ts; + __u64 alt_frame_ts; + __u8 ref_frame_sign_bias; + __u8 reset_frame_context; + __u8 frame_context_idx; + __u8 profile; + __u8 bit_depth; + __u8 interpolation_filter; + __u8 tile_cols_log2; + __u8 tile_rows_log2; + __u8 reference_mode; + __u8 reserved[7]; +}; + +#define V4L2_VP9_NUM_FRAME_CTX 4 + +/** + * struct v4l2_vp9_mv_probs - VP9 Motion vector probability updates + * @joint: motion vector joint probability updates. + * @sign: motion vector sign probability updates. + * @classes: motion vector class probability updates. + * @class0_bit: motion vector class0 bit probability updates. + * @bits: motion vector bits probability updates. + * @class0_fr: motion vector class0 fractional bit probability updates. + * @fr: motion vector fractional bit probability updates. + * @class0_hp: motion vector class0 high precision fractional bit probability updates. + * @hp: motion vector high precision fractional bit probability updates. + * + * This structure contains new values of motion vector probabilities. + * A value of zero in an array element means there is no update of the relevant probability. + * See `struct v4l2_vp9_prob_updates` for details. + */ +struct v4l2_vp9_mv_probs { + __u8 joint[3]; + __u8 sign[2]; + __u8 classes[2][10]; + __u8 class0_bit[2]; + __u8 bits[2][10]; + __u8 class0_fr[2][2][3]; + __u8 fr[2][3]; + __u8 class0_hp[2]; + __u8 hp[2]; +}; + +#define V4L2_CID_STATELESS_VP9_COMPRESSED_HDR (V4L2_CID_CODEC_STATELESS_BASE + 301) + +#define V4L2_VP9_TX_MODE_ONLY_4X4 0 +#define V4L2_VP9_TX_MODE_ALLOW_8X8 1 +#define V4L2_VP9_TX_MODE_ALLOW_16X16 2 +#define V4L2_VP9_TX_MODE_ALLOW_32X32 3 +#define V4L2_VP9_TX_MODE_SELECT 4 + +/** + * struct v4l2_ctrl_vp9_compressed_hdr - VP9 probability updates control + * @tx_mode: specifies the TX mode. Set to one of V4L2_VP9_TX_MODE_{}. + * @tx8: TX 8x8 probability updates. + * @tx16: TX 16x16 probability updates. + * @tx32: TX 32x32 probability updates. + * @coef: coefficient probability updates. + * @skip: skip probability updates. + * @inter_mode: inter mode probability updates. + * @interp_filter: interpolation filter probability updates. + * @is_inter: is inter-block probability updates. + * @comp_mode: compound prediction mode probability updates. + * @single_ref: single ref probability updates. + * @comp_ref: compound ref probability updates. + * @y_mode: Y prediction mode probability updates. + * @uv_mode: UV prediction mode probability updates. + * @partition: partition probability updates. + * @mv: motion vector probability updates. + * + * This structure holds the probabilities update as parsed in the compressed + * header (Spec 6.3). These values represent the value of probability update after + * being translated with inv_map_table[] (see 6.3.5). A value of zero in an array element + * means that there is no update of the relevant probability. + * + * This control is optional and needs to be used when dealing with the hardware which is + * not capable of parsing the compressed header itself. Only drivers which need it will + * implement it. + */ +struct v4l2_ctrl_vp9_compressed_hdr { + __u8 tx_mode; + __u8 tx8[2][1]; + __u8 tx16[2][2]; + __u8 tx32[2][3]; + __u8 coef[4][2][2][6][6][3]; + __u8 skip[3]; + __u8 inter_mode[7][3]; + __u8 interp_filter[4][2]; + __u8 is_inter[4]; + __u8 comp_mode[5]; + __u8 single_ref[5][2]; + __u8 comp_ref[5]; + __u8 y_mode[4][9]; + __u8 uv_mode[10][9]; + __u8 partition[16][3]; + + struct v4l2_vp9_mv_probs mv; +}; + +/* Stateless AV1 controls */ + +#define V4L2_AV1_TOTAL_REFS_PER_FRAME 8 +#define V4L2_AV1_CDEF_MAX 8 +#define V4L2_AV1_NUM_PLANES_MAX 3 /* 1 if monochrome, 3 otherwise */ +#define V4L2_AV1_MAX_SEGMENTS 8 +#define V4L2_AV1_MAX_OPERATING_POINTS (1 << 5) /* 5 bits to encode */ +#define V4L2_AV1_REFS_PER_FRAME 7 +#define V4L2_AV1_MAX_NUM_Y_POINTS (1 << 4) /* 4 bits to encode */ +#define V4L2_AV1_MAX_NUM_CB_POINTS (1 << 4) /* 4 bits to encode */ +#define V4L2_AV1_MAX_NUM_CR_POINTS (1 << 4) /* 4 bits to encode */ +#define V4L2_AV1_AR_COEFFS_SIZE 25 /* (2 * 3 * (3 + 1)) + 1 */ +#define V4L2_AV1_MAX_NUM_PLANES 3 +#define V4L2_AV1_MAX_TILE_COLS 64 +#define V4L2_AV1_MAX_TILE_ROWS 64 +#define V4L2_AV1_MAX_TILE_COUNT 512 + +#define V4L2_AV1_SEQUENCE_FLAG_STILL_PICTURE 0x00000001 +#define V4L2_AV1_SEQUENCE_FLAG_USE_128X128_SUPERBLOCK 0x00000002 +#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_FILTER_INTRA 0x00000004 +#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_INTRA_EDGE_FILTER 0x00000008 +#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_INTERINTRA_COMPOUND 0x00000010 +#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_MASKED_COMPOUND 0x00000020 +#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_WARPED_MOTION 0x00000040 +#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_DUAL_FILTER 0x00000080 +#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_ORDER_HINT 0x00000100 +#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_JNT_COMP 0x00000200 +#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_REF_FRAME_MVS 0x00000400 +#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_SUPERRES 0x00000800 +#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_CDEF 0x00001000 +#define V4L2_AV1_SEQUENCE_FLAG_ENABLE_RESTORATION 0x00002000 +#define V4L2_AV1_SEQUENCE_FLAG_MONO_CHROME 0x00004000 +#define V4L2_AV1_SEQUENCE_FLAG_COLOR_RANGE 0x00008000 +#define V4L2_AV1_SEQUENCE_FLAG_SUBSAMPLING_X 0x00010000 +#define V4L2_AV1_SEQUENCE_FLAG_SUBSAMPLING_Y 0x00020000 +#define V4L2_AV1_SEQUENCE_FLAG_FILM_GRAIN_PARAMS_PRESENT 0x00040000 +#define V4L2_AV1_SEQUENCE_FLAG_SEPARATE_UV_DELTA_Q 0x00080000 + +#define V4L2_CID_STATELESS_AV1_SEQUENCE (V4L2_CID_CODEC_STATELESS_BASE + 500) +/** + * struct v4l2_ctrl_av1_sequence - AV1 Sequence + * + * Represents an AV1 Sequence OBU. See section 5.5 "Sequence header OBU syntax" + * for more details. + * + * @flags: See V4L2_AV1_SEQUENCE_FLAG_{}. + * @seq_profile: specifies the features that can be used in the coded video + * sequence. + * @order_hint_bits: specifies the number of bits used for the order_hint field + * at each frame. + * @bit_depth: the bitdepth to use for the sequence as described in section + * 5.5.2 "Color config syntax". + * @reserved: padding field. Should be zeroed by applications. + * @max_frame_width_minus_1: specifies the maximum frame width minus 1 for the + * frames represented by this sequence header. + * @max_frame_height_minus_1: specifies the maximum frame height minus 1 for the + * frames represented by this sequence header. + */ +struct v4l2_ctrl_av1_sequence { + __u32 flags; + __u8 seq_profile; + __u8 order_hint_bits; + __u8 bit_depth; + __u8 reserved; + __u16 max_frame_width_minus_1; + __u16 max_frame_height_minus_1; +}; + +#define V4L2_CID_STATELESS_AV1_TILE_GROUP_ENTRY (V4L2_CID_CODEC_STATELESS_BASE + 501) +/** + * struct v4l2_ctrl_av1_tile_group_entry - AV1 Tile Group entry + * + * Represents a single AV1 tile inside an AV1 Tile Group. Note that MiRowStart, + * MiRowEnd, MiColStart and MiColEnd can be retrieved from struct + * v4l2_av1_tile_info in struct v4l2_ctrl_av1_frame using tile_row and + * tile_col. See section 6.10.1 "General tile group OBU semantics" for more + * details. + * + * @tile_offset: offset from the OBU data, i.e. where the coded tile data + * actually starts. + * @tile_size: specifies the size in bytes of the coded tile. Equivalent to + * "TileSize" in the AV1 Specification. + * @tile_row: specifies the row of the current tile. Equivalent to "TileRow" in + * the AV1 Specification. + * @tile_col: specifies the col of the current tile. Equivalent to "TileCol" in + * the AV1 Specification. + */ +struct v4l2_ctrl_av1_tile_group_entry { + __u32 tile_offset; + __u32 tile_size; + __u32 tile_row; + __u32 tile_col; +}; + +/** + * enum v4l2_av1_warp_model - AV1 Warp Model as described in section 3 + * "Symbols and abbreviated terms" of the AV1 Specification. + * + * @V4L2_AV1_WARP_MODEL_IDENTITY: Warp model is just an identity transform. + * @V4L2_AV1_WARP_MODEL_TRANSLATION: Warp model is a pure translation. + * @V4L2_AV1_WARP_MODEL_ROTZOOM: Warp model is a rotation + symmetric zoom + + * translation. + * @V4L2_AV1_WARP_MODEL_AFFINE: Warp model is a general affine transform. + */ +enum v4l2_av1_warp_model { + V4L2_AV1_WARP_MODEL_IDENTITY = 0, + V4L2_AV1_WARP_MODEL_TRANSLATION = 1, + V4L2_AV1_WARP_MODEL_ROTZOOM = 2, + V4L2_AV1_WARP_MODEL_AFFINE = 3, +}; + +/** + * enum v4l2_av1_reference_frame - AV1 reference frames + * + * @V4L2_AV1_REF_INTRA_FRAME: Intra Frame Reference + * @V4L2_AV1_REF_LAST_FRAME: Last Reference Frame + * @V4L2_AV1_REF_LAST2_FRAME: Last2 Reference Frame + * @V4L2_AV1_REF_LAST3_FRAME: Last3 Reference Frame + * @V4L2_AV1_REF_GOLDEN_FRAME: Golden Reference Frame + * @V4L2_AV1_REF_BWDREF_FRAME: BWD Reference Frame + * @V4L2_AV1_REF_ALTREF2_FRAME: Alternative2 Reference Frame + * @V4L2_AV1_REF_ALTREF_FRAME: Alternative Reference Frame + */ +enum v4l2_av1_reference_frame { + V4L2_AV1_REF_INTRA_FRAME = 0, + V4L2_AV1_REF_LAST_FRAME = 1, + V4L2_AV1_REF_LAST2_FRAME = 2, + V4L2_AV1_REF_LAST3_FRAME = 3, + V4L2_AV1_REF_GOLDEN_FRAME = 4, + V4L2_AV1_REF_BWDREF_FRAME = 5, + V4L2_AV1_REF_ALTREF2_FRAME = 6, + V4L2_AV1_REF_ALTREF_FRAME = 7, +}; + +#define V4L2_AV1_GLOBAL_MOTION_IS_INVALID(ref) (1 << (ref)) + +#define V4L2_AV1_GLOBAL_MOTION_FLAG_IS_GLOBAL 0x1 +#define V4L2_AV1_GLOBAL_MOTION_FLAG_IS_ROT_ZOOM 0x2 +#define V4L2_AV1_GLOBAL_MOTION_FLAG_IS_TRANSLATION 0x4 +/** + * struct v4l2_av1_global_motion - AV1 Global Motion parameters as described in + * section 6.8.17 "Global motion params semantics" of the AV1 specification. + * + * @flags: A bitfield containing the flags per reference frame. See + * V4L2_AV1_GLOBAL_MOTION_FLAG_{} + * @type: The type of global motion transform used. + * @params: this field has the same meaning as "gm_params" in the AV1 + * specification. + * @invalid: bitfield indicating whether the global motion params are invalid + * for a given reference frame. See section 7.11.3.6 Setup shear process and + * the variable "warpValid". Use V4L2_AV1_GLOBAL_MOTION_IS_INVALID(ref) to + * create a suitable mask. + * @reserved: padding field. Should be zeroed by applications. + */ + +struct v4l2_av1_global_motion { + __u8 flags[V4L2_AV1_TOTAL_REFS_PER_FRAME]; + enum v4l2_av1_warp_model type[V4L2_AV1_TOTAL_REFS_PER_FRAME]; + __s32 params[V4L2_AV1_TOTAL_REFS_PER_FRAME][6]; + __u8 invalid; + __u8 reserved[3]; +}; + +/** + * enum v4l2_av1_frame_restoration_type - AV1 Frame Restoration Type + * @V4L2_AV1_FRAME_RESTORE_NONE: no filtering is applied. + * @V4L2_AV1_FRAME_RESTORE_WIENER: Wiener filter process is invoked. + * @V4L2_AV1_FRAME_RESTORE_SGRPROJ: self guided filter process is invoked. + * @V4L2_AV1_FRAME_RESTORE_SWITCHABLE: restoration filter is swichtable. + */ +enum v4l2_av1_frame_restoration_type { + V4L2_AV1_FRAME_RESTORE_NONE = 0, + V4L2_AV1_FRAME_RESTORE_WIENER = 1, + V4L2_AV1_FRAME_RESTORE_SGRPROJ = 2, + V4L2_AV1_FRAME_RESTORE_SWITCHABLE = 3, +}; + +#define V4L2_AV1_LOOP_RESTORATION_FLAG_USES_LR 0x1 +#define V4L2_AV1_LOOP_RESTORATION_FLAG_USES_CHROMA_LR 0x2 + +/** + * struct v4l2_av1_loop_restoration - AV1 Loop Restauration as described in + * section 6.10.15 "Loop restoration params semantics" of the AV1 specification. + * + * @flags: See V4L2_AV1_LOOP_RESTORATION_FLAG_{}. + * @lr_unit_shift: specifies if the luma restoration size should be halved. + * @lr_uv_shift: specifies if the chroma size should be half the luma size. + * @reserved: padding field. Should be zeroed by applications. + * @frame_restoration_type: specifies the type of restoration used for each + * plane. See enum v4l2_av1_frame_restoration_type. + * @loop_restoration_size: specifies the size of loop restoration units in units + * of samples in the current plane. + */ +struct v4l2_av1_loop_restoration { + __u8 flags; + __u8 lr_unit_shift; + __u8 lr_uv_shift; + __u8 reserved; + enum v4l2_av1_frame_restoration_type frame_restoration_type[V4L2_AV1_NUM_PLANES_MAX]; + __u32 loop_restoration_size[V4L2_AV1_MAX_NUM_PLANES]; +}; + +/** + * struct v4l2_av1_cdef - AV1 CDEF params semantics as described in section + * 6.10.14 "CDEF params semantics" of the AV1 specification + * + * @damping_minus_3: controls the amount of damping in the deringing filter. + * @bits: specifies the number of bits needed to specify which CDEF filter to + * apply. + * @y_pri_strength: specifies the strength of the primary filter. + * @y_sec_strength: specifies the strength of the secondary filter. + * @uv_pri_strength: specifies the strength of the primary filter. + * @uv_sec_strength: specifies the strength of the secondary filter. + */ +struct v4l2_av1_cdef { + __u8 damping_minus_3; + __u8 bits; + __u8 y_pri_strength[V4L2_AV1_CDEF_MAX]; + __u8 y_sec_strength[V4L2_AV1_CDEF_MAX]; + __u8 uv_pri_strength[V4L2_AV1_CDEF_MAX]; + __u8 uv_sec_strength[V4L2_AV1_CDEF_MAX]; +}; + +#define V4L2_AV1_SEGMENTATION_FLAG_ENABLED 0x1 +#define V4L2_AV1_SEGMENTATION_FLAG_UPDATE_MAP 0x2 +#define V4L2_AV1_SEGMENTATION_FLAG_TEMPORAL_UPDATE 0x4 +#define V4L2_AV1_SEGMENTATION_FLAG_UPDATE_DATA 0x8 +#define V4L2_AV1_SEGMENTATION_FLAG_SEG_ID_PRE_SKIP 0x10 + +/** + * enum v4l2_av1_segment_feature - AV1 segment features as described in section + * 3 "Symbols and abbreviated terms" of the AV1 specification. + * + * @V4L2_AV1_SEG_LVL_ALT_Q: Index for quantizer segment feature. + * @V4L2_AV1_SEG_LVL_ALT_LF_Y_V: Index for vertical luma loop filter segment + * feature. + * @V4L2_AV1_SEG_LVL_REF_FRAME: Index for reference frame segment feature. + * @V4L2_AV1_SEG_LVL_REF_SKIP: Index for skip segment feature. + * @V4L2_AV1_SEG_LVL_REF_GLOBALMV: Index for global mv feature. + * @V4L2_AV1_SEG_LVL_MAX: Number of segment features. + */ +enum v4l2_av1_segment_feature { + V4L2_AV1_SEG_LVL_ALT_Q = 0, + V4L2_AV1_SEG_LVL_ALT_LF_Y_V = 1, + V4L2_AV1_SEG_LVL_REF_FRAME = 5, + V4L2_AV1_SEG_LVL_REF_SKIP = 6, + V4L2_AV1_SEG_LVL_REF_GLOBALMV = 7, + V4L2_AV1_SEG_LVL_MAX = 8 +}; + +#define V4L2_AV1_SEGMENT_FEATURE_ENABLED(id) (1 << (id)) + +/** + * struct v4l2_av1_segmentation - AV1 Segmentation params as defined in section + * 6.8.13 "Segmentation params semantics" of the AV1 specification. + * + * @flags: see V4L2_AV1_SEGMENTATION_FLAG_{}. + * @last_active_seg_id: indicates the highest numbered segment id that has some + * enabled feature. This is used when decoding the segment id to only decode + * choices corresponding to used segments. + * @feature_enabled: bitmask defining which features are enabled in each + * segment. Use V4L2_AV1_SEGMENT_FEATURE_ENABLED to build a suitable mask. + * @feature_data: data attached to each feature. Data entry is only valid if the + * feature is enabled + */ +struct v4l2_av1_segmentation { + __u8 flags; + __u8 last_active_seg_id; + __u8 feature_enabled[V4L2_AV1_MAX_SEGMENTS]; + __s16 feature_data[V4L2_AV1_MAX_SEGMENTS][V4L2_AV1_SEG_LVL_MAX]; +}; + +#define V4L2_AV1_LOOP_FILTER_FLAG_DELTA_ENABLED 0x1 +#define V4L2_AV1_LOOP_FILTER_FLAG_DELTA_UPDATE 0x2 +#define V4L2_AV1_LOOP_FILTER_FLAG_DELTA_LF_PRESENT 0x4 +#define V4L2_AV1_LOOP_FILTER_FLAG_DELTA_LF_MULTI 0x8 + +/** + * struct v4l2_av1_loop_filter - AV1 Loop filter params as defined in section + * 6.8.10 "Loop filter semantics" and 6.8.16 "Loop filter delta parameters + * semantics" of the AV1 specification. + * + * @flags: see V4L2_AV1_LOOP_FILTER_FLAG_{} + * @level: an array containing loop filter strength values. Different loop + * filter strength values from the array are used depending on the image plane + * being filtered, and the edge direction (vertical or horizontal) being + * filtered. + * @sharpness: indicates the sharpness level. The loop_filter_level and + * loop_filter_sharpness together determine when a block edge is filtered, and + * by how much the filtering can change the sample values. The loop filter + * process is described in section 7.14 of the AV1 specification. + * @ref_deltas: contains the adjustment needed for the filter level based on the + * chosen reference frame. If this syntax element is not present, it maintains + * its previous value. + * @mode_deltas: contains the adjustment needed for the filter level based on + * the chosen mode. If this syntax element is not present, it maintains its + * previous value. + * @delta_lf_res: specifies the left shift which should be applied to decoded + * loop filter delta values. + */ +struct v4l2_av1_loop_filter { + __u8 flags; + __u8 level[4]; + __u8 sharpness; + __s8 ref_deltas[V4L2_AV1_TOTAL_REFS_PER_FRAME]; + __s8 mode_deltas[2]; + __u8 delta_lf_res; +}; + +#define V4L2_AV1_QUANTIZATION_FLAG_DIFF_UV_DELTA 0x1 +#define V4L2_AV1_QUANTIZATION_FLAG_USING_QMATRIX 0x2 +#define V4L2_AV1_QUANTIZATION_FLAG_DELTA_Q_PRESENT 0x4 + +/** + * struct v4l2_av1_quantization - AV1 Quantization params as defined in section + * 6.8.11 "Quantization params semantics" of the AV1 specification. + * + * @flags: see V4L2_AV1_QUANTIZATION_FLAG_{} + * @base_q_idx: indicates the base frame qindex. This is used for Y AC + * coefficients and as the base value for the other quantizers. + * @delta_q_y_dc: indicates the Y DC quantizer relative to base_q_idx. + * @delta_q_u_dc: indicates the U DC quantizer relative to base_q_idx. + * @delta_q_u_ac: indicates the U AC quantizer relative to base_q_idx. + * @delta_q_v_dc: indicates the V DC quantizer relative to base_q_idx. + * @delta_q_v_ac: indicates the V AC quantizer relative to base_q_idx. + * @qm_y: specifies the level in the quantizer matrix that should be used for + * luma plane decoding. + * @qm_u: specifies the level in the quantizer matrix that should be used for + * chroma U plane decoding. + * @qm_v: specifies the level in the quantizer matrix that should be used for + * chroma V plane decoding. + * @delta_q_res: specifies the left shift which should be applied to decoded + * quantizer index delta values. + */ +struct v4l2_av1_quantization { + __u8 flags; + __u8 base_q_idx; + __s8 delta_q_y_dc; + __s8 delta_q_u_dc; + __s8 delta_q_u_ac; + __s8 delta_q_v_dc; + __s8 delta_q_v_ac; + __u8 qm_y; + __u8 qm_u; + __u8 qm_v; + __u8 delta_q_res; +}; + +#define V4L2_AV1_TILE_INFO_FLAG_UNIFORM_TILE_SPACING 0x1 + +/** + * struct v4l2_av1_tile_info - AV1 Tile info as defined in section 6.8.14 "Tile + * info semantics" of the AV1 specification. + * + * @flags: see V4L2_AV1_TILE_INFO_FLAG_{} + * @context_update_tile_id: specifies which tile to use for the CDF update. + * @tile_rows: specifies the number of tiles down the frame. + * @tile_cols: specifies the number of tiles across the frame. + * @mi_col_starts: an array specifying the start column (in units of 4x4 luma + * samples) for each tile across the image. + * @mi_row_starts: an array specifying the start row (in units of 4x4 luma + * samples) for each tile down the image. + * @width_in_sbs_minus_1: specifies the width of a tile minus 1 in units of + * superblocks. + * @height_in_sbs_minus_1: specifies the height of a tile minus 1 in units of + * superblocks. + * @tile_size_bytes: specifies the number of bytes needed to code each tile + * size. + * @reserved: padding field. Should be zeroed by applications. + */ +struct v4l2_av1_tile_info { + __u8 flags; + __u8 context_update_tile_id; + __u8 tile_cols; + __u8 tile_rows; + __u32 mi_col_starts[V4L2_AV1_MAX_TILE_COLS + 1]; + __u32 mi_row_starts[V4L2_AV1_MAX_TILE_ROWS + 1]; + __u32 width_in_sbs_minus_1[V4L2_AV1_MAX_TILE_COLS]; + __u32 height_in_sbs_minus_1[V4L2_AV1_MAX_TILE_ROWS]; + __u8 tile_size_bytes; + __u8 reserved[3]; +}; + +/** + * enum v4l2_av1_frame_type - AV1 Frame Type + * + * @V4L2_AV1_KEY_FRAME: Key frame + * @V4L2_AV1_INTER_FRAME: Inter frame + * @V4L2_AV1_INTRA_ONLY_FRAME: Intra-only frame + * @V4L2_AV1_SWITCH_FRAME: Switch frame + */ +enum v4l2_av1_frame_type { + V4L2_AV1_KEY_FRAME = 0, + V4L2_AV1_INTER_FRAME = 1, + V4L2_AV1_INTRA_ONLY_FRAME = 2, + V4L2_AV1_SWITCH_FRAME = 3 +}; + +/** + * enum v4l2_av1_interpolation_filter - AV1 interpolation filter types + * + * @V4L2_AV1_INTERPOLATION_FILTER_EIGHTTAP: eight tap filter + * @V4L2_AV1_INTERPOLATION_FILTER_EIGHTTAP_SMOOTH: eight tap smooth filter + * @V4L2_AV1_INTERPOLATION_FILTER_EIGHTTAP_SHARP: eight tap sharp filter + * @V4L2_AV1_INTERPOLATION_FILTER_BILINEAR: bilinear filter + * @V4L2_AV1_INTERPOLATION_FILTER_SWITCHABLE: filter selection is signaled at + * the block level + * + * See section 6.8.9 "Interpolation filter semantics" of the AV1 specification + * for more details. + */ +enum v4l2_av1_interpolation_filter { + V4L2_AV1_INTERPOLATION_FILTER_EIGHTTAP = 0, + V4L2_AV1_INTERPOLATION_FILTER_EIGHTTAP_SMOOTH = 1, + V4L2_AV1_INTERPOLATION_FILTER_EIGHTTAP_SHARP = 2, + V4L2_AV1_INTERPOLATION_FILTER_BILINEAR = 3, + V4L2_AV1_INTERPOLATION_FILTER_SWITCHABLE = 4, +}; + +/** + * enum v4l2_av1_tx_mode - AV1 Tx mode as described in section 6.8.21 "TX mode + * semantics" of the AV1 specification. + * @V4L2_AV1_TX_MODE_ONLY_4X4: the inverse transform will use only 4x4 + * transforms + * @V4L2_AV1_TX_MODE_LARGEST: the inverse transform will use the largest + * transform size that fits inside the block + * @V4L2_AV1_TX_MODE_SELECT: the choice of transform size is specified + * explicitly for each block. + */ +enum v4l2_av1_tx_mode { + V4L2_AV1_TX_MODE_ONLY_4X4 = 0, + V4L2_AV1_TX_MODE_LARGEST = 1, + V4L2_AV1_TX_MODE_SELECT = 2 +}; + +#define V4L2_AV1_FRAME_FLAG_SHOW_FRAME 0x00000001 +#define V4L2_AV1_FRAME_FLAG_SHOWABLE_FRAME 0x00000002 +#define V4L2_AV1_FRAME_FLAG_ERROR_RESILIENT_MODE 0x00000004 +#define V4L2_AV1_FRAME_FLAG_DISABLE_CDF_UPDATE 0x00000008 +#define V4L2_AV1_FRAME_FLAG_ALLOW_SCREEN_CONTENT_TOOLS 0x00000010 +#define V4L2_AV1_FRAME_FLAG_FORCE_INTEGER_MV 0x00000020 +#define V4L2_AV1_FRAME_FLAG_ALLOW_INTRABC 0x00000040 +#define V4L2_AV1_FRAME_FLAG_USE_SUPERRES 0x00000080 +#define V4L2_AV1_FRAME_FLAG_ALLOW_HIGH_PRECISION_MV 0x00000100 +#define V4L2_AV1_FRAME_FLAG_IS_MOTION_MODE_SWITCHABLE 0x00000200 +#define V4L2_AV1_FRAME_FLAG_USE_REF_FRAME_MVS 0x00000400 +#define V4L2_AV1_FRAME_FLAG_DISABLE_FRAME_END_UPDATE_CDF 0x00000800 +#define V4L2_AV1_FRAME_FLAG_ALLOW_WARPED_MOTION 0x00001000 +#define V4L2_AV1_FRAME_FLAG_REFERENCE_SELECT 0x00002000 +#define V4L2_AV1_FRAME_FLAG_REDUCED_TX_SET 0x00004000 +#define V4L2_AV1_FRAME_FLAG_SKIP_MODE_ALLOWED 0x00008000 +#define V4L2_AV1_FRAME_FLAG_SKIP_MODE_PRESENT 0x00010000 +#define V4L2_AV1_FRAME_FLAG_FRAME_SIZE_OVERRIDE 0x00020000 +#define V4L2_AV1_FRAME_FLAG_BUFFER_REMOVAL_TIME_PRESENT 0x00040000 +#define V4L2_AV1_FRAME_FLAG_FRAME_REFS_SHORT_SIGNALING 0x00080000 + +#define V4L2_CID_STATELESS_AV1_FRAME (V4L2_CID_CODEC_STATELESS_BASE + 502) +/** + * struct v4l2_ctrl_av1_frame - Represents an AV1 Frame Header OBU. + * + * @tile_info: tile info + * @quantization: quantization params + * @segmentation: segmentation params + * @superres_denom: the denominator for the upscaling ratio. + * @loop_filter: loop filter params + * @cdef: cdef params + * @skip_mode_frame: specifies the frames to use for compound prediction when + * skip_mode is equal to 1. + * @primary_ref_frame: specifies which reference frame contains the CDF values + * and other state that should be loaded at the start of the frame. + * @loop_restoration: loop restoration params + * @global_motion: global motion params + * @flags: see V4L2_AV1_FRAME_FLAG_{} + * @frame_type: specifies the AV1 frame type + * @order_hint: specifies OrderHintBits least significant bits of the expected + * output order for this frame. + * @upscaled_width: the upscaled width. + * @interpolation_filter: specifies the filter selection used for performing + * inter prediction. + * @tx_mode: specifies how the transform size is determined. + * @frame_width_minus_1: add 1 to get the frame's width. + * @frame_height_minus_1: add 1 to get the frame's height + * @render_width_minus_1: add 1 to get the render width of the frame in luma + * samples. + * @render_height_minus_1: add 1 to get the render height of the frame in luma + * samples. + * @current_frame_id: specifies the frame id number for the current frame. Frame + * id numbers are additional information that do not affect the decoding + * process, but provide decoders with a way of detecting missing reference + * frames so that appropriate action can be taken. + * @buffer_removal_time: specifies the frame removal time in units of DecCT clock + * ticks counted from the removal time of the last random access point for + * operating point opNum. + * @reserved: padding field. Should be zeroed by applications. + * @order_hints: specifies the expected output order hint for each reference + * frame. This field corresponds to the OrderHints variable from the + * specification (section 5.9.2 "Uncompressed header syntax"). As such, this is + * only used for non-intra frames and ignored otherwise. order_hints[0] is + * always ignored. + * @reference_frame_ts: the V4L2 timestamp of the reference frame slots. + * @ref_frame_idx: used to index into @reference_frame_ts when decoding + * inter-frames. The meaning of this array is the same as in the specification. + * The timestamp refers to the timestamp field in struct v4l2_buffer. Use + * v4l2_timeval_to_ns() to convert the struct timeval to a __u64. + * @refresh_frame_flags: contains a bitmask that specifies which reference frame + * slots will be updated with the current frame after it is decoded. + */ +struct v4l2_ctrl_av1_frame { + struct v4l2_av1_tile_info tile_info; + struct v4l2_av1_quantization quantization; + __u8 superres_denom; + struct v4l2_av1_segmentation segmentation; + struct v4l2_av1_loop_filter loop_filter; + struct v4l2_av1_cdef cdef; + __u8 skip_mode_frame[2]; + __u8 primary_ref_frame; + struct v4l2_av1_loop_restoration loop_restoration; + struct v4l2_av1_global_motion global_motion; + __u32 flags; + enum v4l2_av1_frame_type frame_type; + __u32 order_hint; + __u32 upscaled_width; + enum v4l2_av1_interpolation_filter interpolation_filter; + enum v4l2_av1_tx_mode tx_mode; + __u32 frame_width_minus_1; + __u32 frame_height_minus_1; + __u16 render_width_minus_1; + __u16 render_height_minus_1; + + __u32 current_frame_id; + __u32 buffer_removal_time[V4L2_AV1_MAX_OPERATING_POINTS]; + __u8 reserved[4]; + __u32 order_hints[V4L2_AV1_TOTAL_REFS_PER_FRAME]; + __u64 reference_frame_ts[V4L2_AV1_TOTAL_REFS_PER_FRAME]; + __s8 ref_frame_idx[V4L2_AV1_REFS_PER_FRAME]; + __u8 refresh_frame_flags; +}; + +#define V4L2_AV1_FILM_GRAIN_FLAG_APPLY_GRAIN 0x1 +#define V4L2_AV1_FILM_GRAIN_FLAG_UPDATE_GRAIN 0x2 +#define V4L2_AV1_FILM_GRAIN_FLAG_CHROMA_SCALING_FROM_LUMA 0x4 +#define V4L2_AV1_FILM_GRAIN_FLAG_OVERLAP 0x8 +#define V4L2_AV1_FILM_GRAIN_FLAG_CLIP_TO_RESTRICTED_RANGE 0x10 + +#define V4L2_CID_STATELESS_AV1_FILM_GRAIN (V4L2_CID_CODEC_STATELESS_BASE + 505) +/** + * struct v4l2_ctrl_av1_film_grain - AV1 Film Grain parameters. + * + * Film grain parameters as specified by section 6.8.20 of the AV1 Specification. + * + * @flags: see V4L2_AV1_FILM_GRAIN_{}. + * @cr_mult: represents a multiplier for the cr component used in derivation of + * the input index to the cr component scaling function. + * @grain_seed: specifies the starting value for the pseudo-random numbers used + * during film grain synthesis. + * @film_grain_params_ref_idx: indicates which reference frame contains the + * film grain parameters to be used for this frame. + * @num_y_points: specifies the number of points for the piece-wise linear + * scaling function of the luma component. + * @point_y_value: represents the x (luma value) coordinate for the i-th point + * of the piecewise linear scaling function for luma component. The values are + * signaled on the scale of 0..255. In case of 10 bit video, these values + * correspond to luma values divided by 4. In case of 12 bit video, these values + * correspond to luma values divided by 16. + * @point_y_scaling: represents the scaling (output) value for the i-th point + * of the piecewise linear scaling function for luma component. + * @num_cb_points: specifies the number of points for the piece-wise linear + * scaling function of the cb component. + * @point_cb_value: represents the x coordinate for the i-th point of the + * piece-wise linear scaling function for cb component. The values are signaled + * on the scale of 0..255. + * @point_cb_scaling: represents the scaling (output) value for the i-th point + * of the piecewise linear scaling function for cb component. + * @num_cr_points: specifies represents the number of points for the piece-wise + * linear scaling function of the cr component. + * @point_cr_value: represents the x coordinate for the i-th point of the + * piece-wise linear scaling function for cr component. The values are signaled + * on the scale of 0..255. + * @point_cr_scaling: represents the scaling (output) value for the i-th point + * of the piecewise linear scaling function for cr component. + * @grain_scaling_minus_8: represents the shift – 8 applied to the values of the + * chroma component. The grain_scaling_minus_8 can take values of 0..3 and + * determines the range and quantization step of the standard deviation of film + * grain. + * @ar_coeff_lag: specifies the number of auto-regressive coefficients for luma + * and chroma. + * @ar_coeffs_y_plus_128: specifies auto-regressive coefficients used for the Y + * plane. + * @ar_coeffs_cb_plus_128: specifies auto-regressive coefficients used for the U + * plane. + * @ar_coeffs_cr_plus_128: specifies auto-regressive coefficients used for the V + * plane. + * @ar_coeff_shift_minus_6: specifies the range of the auto-regressive + * coefficients. Values of 0, 1, 2, and 3 correspond to the ranges for + * auto-regressive coefficients of [-2, 2), [-1, 1), [-0.5, 0.5) and [-0.25, + * 0.25) respectively. + * @grain_scale_shift: specifies how much the Gaussian random numbers should be + * scaled down during the grain synthesis process. + * @cb_mult: represents a multiplier for the cb component used in derivation of + * the input index to the cb component scaling function. + * @cb_luma_mult: represents a multiplier for the average luma component used in + * derivation of the input index to the cb component scaling function. + * @cr_luma_mult: represents a multiplier for the average luma component used in + * derivation of the input index to the cr component scaling function. + * @cb_offset: represents an offset used in derivation of the input index to the + * cb component scaling function. + * @cr_offset: represents an offset used in derivation of the input index to the + * cr component scaling function. + * @reserved: padding field. Should be zeroed by applications. + */ +struct v4l2_ctrl_av1_film_grain { + __u8 flags; + __u8 cr_mult; + __u16 grain_seed; + __u8 film_grain_params_ref_idx; + __u8 num_y_points; + __u8 point_y_value[V4L2_AV1_MAX_NUM_Y_POINTS]; + __u8 point_y_scaling[V4L2_AV1_MAX_NUM_Y_POINTS]; + __u8 num_cb_points; + __u8 point_cb_value[V4L2_AV1_MAX_NUM_CB_POINTS]; + __u8 point_cb_scaling[V4L2_AV1_MAX_NUM_CB_POINTS]; + __u8 num_cr_points; + __u8 point_cr_value[V4L2_AV1_MAX_NUM_CR_POINTS]; + __u8 point_cr_scaling[V4L2_AV1_MAX_NUM_CR_POINTS]; + __u8 grain_scaling_minus_8; + __u8 ar_coeff_lag; + __u8 ar_coeffs_y_plus_128[V4L2_AV1_AR_COEFFS_SIZE]; + __u8 ar_coeffs_cb_plus_128[V4L2_AV1_AR_COEFFS_SIZE]; + __u8 ar_coeffs_cr_plus_128[V4L2_AV1_AR_COEFFS_SIZE]; + __u8 ar_coeff_shift_minus_6; + __u8 grain_scale_shift; + __u8 cb_mult; + __u8 cb_luma_mult; + __u8 cr_luma_mult; + __u16 cb_offset; + __u16 cr_offset; + __u8 reserved[4]; +}; + +/* MPEG-compression definitions kept for backwards compatibility */ +#define V4L2_CTRL_CLASS_MPEG V4L2_CTRL_CLASS_CODEC +#define V4L2_CID_MPEG_CLASS V4L2_CID_CODEC_CLASS +#define V4L2_CID_MPEG_BASE V4L2_CID_CODEC_BASE +#define V4L2_CID_MPEG_CX2341X_BASE V4L2_CID_CODEC_CX2341X_BASE +#define V4L2_CID_MPEG_MFC51_BASE V4L2_CID_CODEC_MFC51_BASE + #endif diff --git a/linux-headers/include/linux/v4l2-dv-timings.h b/linux-headers/include/linux/v4l2-dv-timings.h index b52b67c6256..ef0128c7369 100644 --- a/linux-headers/include/linux/v4l2-dv-timings.h +++ b/linux-headers/include/linux/v4l2-dv-timings.h @@ -3,15 +3,6 @@ * V4L2 DV timings header. * * Copyright (C) 2012-2016 Hans Verkuil - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. */ #ifndef _V4L2_DV_TIMINGS_H diff --git a/linux-headers/include/linux/v4l2-mediabus.h b/linux-headers/include/linux/v4l2-mediabus.h index 846dadfbfc6..2c318de1048 100644 --- a/linux-headers/include/linux/v4l2-mediabus.h +++ b/linux-headers/include/linux/v4l2-mediabus.h @@ -3,10 +3,6 @@ * Media Bus API header * * Copyright (C) 2009, Guennadi Liakhovetski - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __LINUX_V4L2_MEDIABUS_H diff --git a/linux-headers/include/linux/v4l2-subdev.h b/linux-headers/include/linux/v4l2-subdev.h index 00850b98078..4a195b68f28 100644 --- a/linux-headers/include/linux/v4l2-subdev.h +++ b/linux-headers/include/linux/v4l2-subdev.h @@ -6,24 +6,12 @@ * * Contacts: Laurent Pinchart * Sakari Ailus - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __LINUX_V4L2_SUBDEV_H #define __LINUX_V4L2_SUBDEV_H +#include #include #include #include @@ -44,12 +32,15 @@ enum v4l2_subdev_format_whence { * @which: format type (from enum v4l2_subdev_format_whence) * @pad: pad number, as reported by the media API * @format: media bus format (format code and frame size) + * @stream: stream number, defined in subdev routing + * @reserved: drivers and applications must zero this array */ struct v4l2_subdev_format { __u32 which; __u32 pad; struct v4l2_mbus_framefmt format; - __u32 reserved[8]; + __u32 stream; + __u32 reserved[7]; }; /** @@ -57,12 +48,15 @@ struct v4l2_subdev_format { * @which: format type (from enum v4l2_subdev_format_whence) * @pad: pad number, as reported by the media API * @rect: pad crop rectangle boundaries + * @stream: stream number, defined in subdev routing + * @reserved: drivers and applications must zero this array */ struct v4l2_subdev_crop { __u32 which; __u32 pad; struct v4l2_rect rect; - __u32 reserved[8]; + __u32 stream; + __u32 reserved[7]; }; #define V4L2_SUBDEV_MBUS_CODE_CSC_COLORSPACE 0x00000001 @@ -78,6 +72,8 @@ struct v4l2_subdev_crop { * @code: format code (MEDIA_BUS_FMT_ definitions) * @which: format type (from enum v4l2_subdev_format_whence) * @flags: flags set by the driver, (V4L2_SUBDEV_MBUS_CODE_*) + * @stream: stream number, defined in subdev routing + * @reserved: drivers and applications must zero this array */ struct v4l2_subdev_mbus_code_enum { __u32 pad; @@ -85,15 +81,22 @@ struct v4l2_subdev_mbus_code_enum { __u32 code; __u32 which; __u32 flags; - __u32 reserved[7]; + __u32 stream; + __u32 reserved[6]; }; /** * struct v4l2_subdev_frame_size_enum - Media bus format enumeration - * @pad: pad number, as reported by the media API * @index: format index during enumeration + * @pad: pad number, as reported by the media API * @code: format code (MEDIA_BUS_FMT_ definitions) + * @min_width: minimum frame width, in pixels + * @max_width: maximum frame width, in pixels + * @min_height: minimum frame height, in pixels + * @max_height: maximum frame height, in pixels * @which: format type (from enum v4l2_subdev_format_whence) + * @stream: stream number, defined in subdev routing + * @reserved: drivers and applications must zero this array */ struct v4l2_subdev_frame_size_enum { __u32 index; @@ -104,18 +107,22 @@ struct v4l2_subdev_frame_size_enum { __u32 min_height; __u32 max_height; __u32 which; - __u32 reserved[8]; + __u32 stream; + __u32 reserved[7]; }; /** * struct v4l2_subdev_frame_interval - Pad-level frame rate * @pad: pad number, as reported by the media API * @interval: frame interval in seconds + * @stream: stream number, defined in subdev routing + * @reserved: drivers and applications must zero this array */ struct v4l2_subdev_frame_interval { __u32 pad; struct v4l2_fract interval; - __u32 reserved[9]; + __u32 stream; + __u32 reserved[8]; }; /** @@ -127,6 +134,8 @@ struct v4l2_subdev_frame_interval { * @height: frame height in pixels * @interval: frame interval in seconds * @which: format type (from enum v4l2_subdev_format_whence) + * @stream: stream number, defined in subdev routing + * @reserved: drivers and applications must zero this array */ struct v4l2_subdev_frame_interval_enum { __u32 index; @@ -136,7 +145,8 @@ struct v4l2_subdev_frame_interval_enum { __u32 height; struct v4l2_fract interval; __u32 which; - __u32 reserved[8]; + __u32 stream; + __u32 reserved[7]; }; /** @@ -148,6 +158,7 @@ struct v4l2_subdev_frame_interval_enum { * defined in v4l2-common.h; V4L2_SEL_TGT_* . * @flags: constraint flags, defined in v4l2-common.h; V4L2_SEL_FLAG_*. * @r: coordinates of the selection window + * @stream: stream number, defined in subdev routing * @reserved: for future use, set to zero for now * * Hardware may use multiple helper windows to process a video stream. @@ -160,7 +171,8 @@ struct v4l2_subdev_selection { __u32 target; __u32 flags; struct v4l2_rect r; - __u32 reserved[8]; + __u32 stream; + __u32 reserved[7]; }; /** @@ -176,7 +188,68 @@ struct v4l2_subdev_capability { }; /* The v4l2 sub-device video device node is registered in read-only mode. */ -#define V4L2_SUBDEV_CAP_RO_SUBDEV BIT(0) +#define V4L2_SUBDEV_CAP_RO_SUBDEV 0x00000001 + +/* The v4l2 sub-device supports routing and multiplexed streams. */ +#define V4L2_SUBDEV_CAP_STREAMS 0x00000002 + +/* + * Is the route active? An active route will start when streaming is enabled + * on a video node. + */ +#define V4L2_SUBDEV_ROUTE_FL_ACTIVE (1U << 0) + +/** + * struct v4l2_subdev_route - A route inside a subdev + * + * @sink_pad: the sink pad index + * @sink_stream: the sink stream identifier + * @source_pad: the source pad index + * @source_stream: the source stream identifier + * @flags: route flags V4L2_SUBDEV_ROUTE_FL_* + * @reserved: drivers and applications must zero this array + */ +struct v4l2_subdev_route { + __u32 sink_pad; + __u32 sink_stream; + __u32 source_pad; + __u32 source_stream; + __u32 flags; + __u32 reserved[5]; +}; + +/** + * struct v4l2_subdev_routing - Subdev routing information + * + * @which: configuration type (from enum v4l2_subdev_format_whence) + * @num_routes: the total number of routes in the routes array + * @routes: pointer to the routes array + * @reserved: drivers and applications must zero this array + */ +struct v4l2_subdev_routing { + __u32 which; + __u32 num_routes; + __u64 routes; + __u32 reserved[6]; +}; + +/* + * The client is aware of streams. Setting this flag enables the use of 'stream' + * fields (referring to the stream number) with various ioctls. If this is not + * set (which is the default), the 'stream' fields will be forced to 0 by the + * kernel. + */ + #define V4L2_SUBDEV_CLIENT_CAP_STREAMS (1U << 0) + +/** + * struct v4l2_subdev_client_capability - Capabilities of the client accessing + * the subdev + * + * @capabilities: A bitmask of V4L2_SUBDEV_CLIENT_CAP_* flags. + */ +struct v4l2_subdev_client_capability { + __u64 capabilities; +}; /* Backwards compatibility define --- to be removed */ #define v4l2_subdev_edid v4l2_edid @@ -193,6 +266,11 @@ struct v4l2_subdev_capability { #define VIDIOC_SUBDEV_S_CROP _IOWR('V', 60, struct v4l2_subdev_crop) #define VIDIOC_SUBDEV_G_SELECTION _IOWR('V', 61, struct v4l2_subdev_selection) #define VIDIOC_SUBDEV_S_SELECTION _IOWR('V', 62, struct v4l2_subdev_selection) +#define VIDIOC_SUBDEV_G_ROUTING _IOWR('V', 38, struct v4l2_subdev_routing) +#define VIDIOC_SUBDEV_S_ROUTING _IOWR('V', 39, struct v4l2_subdev_routing) +#define VIDIOC_SUBDEV_G_CLIENT_CAP _IOR('V', 101, struct v4l2_subdev_client_capability) +#define VIDIOC_SUBDEV_S_CLIENT_CAP _IOWR('V', 102, struct v4l2_subdev_client_capability) + /* The following ioctls are identical to the ioctls in videodev2.h */ #define VIDIOC_SUBDEV_G_STD _IOR('V', 23, v4l2_std_id) #define VIDIOC_SUBDEV_S_STD _IOW('V', 24, v4l2_std_id) diff --git a/linux-headers/include/linux/vdpa.h b/linux-headers/include/linux/vdpa.h new file mode 100644 index 00000000000..e319fa750a4 --- /dev/null +++ b/linux-headers/include/linux/vdpa.h @@ -0,0 +1,63 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * vdpa device management interface + * Copyright (c) 2020 Mellanox Technologies Ltd. All rights reserved. + */ + +#ifndef _LINUX_VDPA_H_ +#define _LINUX_VDPA_H_ + +#define VDPA_GENL_NAME "vdpa" +#define VDPA_GENL_VERSION 0x1 + +enum vdpa_command { + VDPA_CMD_UNSPEC, + VDPA_CMD_MGMTDEV_NEW, + VDPA_CMD_MGMTDEV_GET, /* can dump */ + VDPA_CMD_DEV_NEW, + VDPA_CMD_DEV_DEL, + VDPA_CMD_DEV_GET, /* can dump */ + VDPA_CMD_DEV_CONFIG_GET, /* can dump */ + VDPA_CMD_DEV_VSTATS_GET, +}; + +enum vdpa_attr { + VDPA_ATTR_UNSPEC, + + /* Pad attribute for 64b alignment */ + VDPA_ATTR_PAD = VDPA_ATTR_UNSPEC, + + /* bus name (optional) + dev name together make the parent device handle */ + VDPA_ATTR_MGMTDEV_BUS_NAME, /* string */ + VDPA_ATTR_MGMTDEV_DEV_NAME, /* string */ + VDPA_ATTR_MGMTDEV_SUPPORTED_CLASSES, /* u64 */ + + VDPA_ATTR_DEV_NAME, /* string */ + VDPA_ATTR_DEV_ID, /* u32 */ + VDPA_ATTR_DEV_VENDOR_ID, /* u32 */ + VDPA_ATTR_DEV_MAX_VQS, /* u32 */ + VDPA_ATTR_DEV_MAX_VQ_SIZE, /* u16 */ + VDPA_ATTR_DEV_MIN_VQ_SIZE, /* u16 */ + + VDPA_ATTR_DEV_NET_CFG_MACADDR, /* binary */ + VDPA_ATTR_DEV_NET_STATUS, /* u8 */ + VDPA_ATTR_DEV_NET_CFG_MAX_VQP, /* u16 */ + VDPA_ATTR_DEV_NET_CFG_MTU, /* u16 */ + + VDPA_ATTR_DEV_NEGOTIATED_FEATURES, /* u64 */ + VDPA_ATTR_DEV_MGMTDEV_MAX_VQS, /* u32 */ + /* virtio features that are supported by the vDPA management device */ + VDPA_ATTR_DEV_SUPPORTED_FEATURES, /* u64 */ + + VDPA_ATTR_DEV_QUEUE_INDEX, /* u32 */ + VDPA_ATTR_DEV_VENDOR_ATTR_NAME, /* string */ + VDPA_ATTR_DEV_VENDOR_ATTR_VALUE, /* u64 */ + + /* virtio features that are provisioned to the vDPA device */ + VDPA_ATTR_DEV_FEATURES, /* u64 */ + + /* new attributes must be added above here */ + VDPA_ATTR_MAX, +}; + +#endif diff --git a/linux-headers/include/linux/vduse.h b/linux-headers/include/linux/vduse.h new file mode 100644 index 00000000000..6d2ca064b5d --- /dev/null +++ b/linux-headers/include/linux/vduse.h @@ -0,0 +1,353 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _VDUSE_H_ +#define _VDUSE_H_ + +#include + +#define VDUSE_BASE 0x81 + +/* The ioctls for control device (/dev/vduse/control) */ + +#define VDUSE_API_VERSION 0 + +/* + * Get the version of VDUSE API that kernel supported (VDUSE_API_VERSION). + * This is used for future extension. + */ +#define VDUSE_GET_API_VERSION _IOR(VDUSE_BASE, 0x00, __u64) + +/* Set the version of VDUSE API that userspace supported. */ +#define VDUSE_SET_API_VERSION _IOW(VDUSE_BASE, 0x01, __u64) + +/** + * struct vduse_dev_config - basic configuration of a VDUSE device + * @name: VDUSE device name, needs to be NUL terminated + * @vendor_id: virtio vendor id + * @device_id: virtio device id + * @features: virtio features + * @vq_num: the number of virtqueues + * @vq_align: the allocation alignment of virtqueue's metadata + * @reserved: for future use, needs to be initialized to zero + * @config_size: the size of the configuration space + * @config: the buffer of the configuration space + * + * Structure used by VDUSE_CREATE_DEV ioctl to create VDUSE device. + */ +struct vduse_dev_config { +#define VDUSE_NAME_MAX 256 + char name[VDUSE_NAME_MAX]; + __u32 vendor_id; + __u32 device_id; + __u64 features; + __u32 vq_num; + __u32 vq_align; + __u32 reserved[13]; + __u32 config_size; + __u8 config[]; +}; + +/* Create a VDUSE device which is represented by a char device (/dev/vduse/$NAME) */ +#define VDUSE_CREATE_DEV _IOW(VDUSE_BASE, 0x02, struct vduse_dev_config) + +/* + * Destroy a VDUSE device. Make sure there are no more references + * to the char device (/dev/vduse/$NAME). + */ +#define VDUSE_DESTROY_DEV _IOW(VDUSE_BASE, 0x03, char[VDUSE_NAME_MAX]) + +/* The ioctls for VDUSE device (/dev/vduse/$NAME) */ + +/** + * struct vduse_iotlb_entry - entry of IOTLB to describe one IOVA region [start, last] + * @offset: the mmap offset on returned file descriptor + * @start: start of the IOVA region + * @last: last of the IOVA region + * @perm: access permission of the IOVA region + * + * Structure used by VDUSE_IOTLB_GET_FD ioctl to find an overlapped IOVA region. + */ +struct vduse_iotlb_entry { + __u64 offset; + __u64 start; + __u64 last; +#define VDUSE_ACCESS_RO 0x1 +#define VDUSE_ACCESS_WO 0x2 +#define VDUSE_ACCESS_RW 0x3 + __u8 perm; +}; + +/* + * Find the first IOVA region that overlaps with the range [start, last] + * and return the corresponding file descriptor. Return -EINVAL means the + * IOVA region doesn't exist. Caller should set start and last fields. + */ +#define VDUSE_IOTLB_GET_FD _IOWR(VDUSE_BASE, 0x10, struct vduse_iotlb_entry) + +/* + * Get the negotiated virtio features. It's a subset of the features in + * struct vduse_dev_config which can be accepted by virtio driver. It's + * only valid after FEATURES_OK status bit is set. + */ +#define VDUSE_DEV_GET_FEATURES _IOR(VDUSE_BASE, 0x11, __u64) + +/** + * struct vduse_config_data - data used to update configuration space + * @offset: the offset from the beginning of configuration space + * @length: the length to write to configuration space + * @buffer: the buffer used to write from + * + * Structure used by VDUSE_DEV_SET_CONFIG ioctl to update device + * configuration space. + */ +struct vduse_config_data { + __u32 offset; + __u32 length; + __u8 buffer[]; +}; + +/* Set device configuration space */ +#define VDUSE_DEV_SET_CONFIG _IOW(VDUSE_BASE, 0x12, struct vduse_config_data) + +/* + * Inject a config interrupt. It's usually used to notify virtio driver + * that device configuration space has changed. + */ +#define VDUSE_DEV_INJECT_CONFIG_IRQ _IO(VDUSE_BASE, 0x13) + +/** + * struct vduse_vq_config - basic configuration of a virtqueue + * @index: virtqueue index + * @max_size: the max size of virtqueue + * @reserved: for future use, needs to be initialized to zero + * + * Structure used by VDUSE_VQ_SETUP ioctl to setup a virtqueue. + */ +struct vduse_vq_config { + __u32 index; + __u16 max_size; + __u16 reserved[13]; +}; + +/* + * Setup the specified virtqueue. Make sure all virtqueues have been + * configured before the device is attached to vDPA bus. + */ +#define VDUSE_VQ_SETUP _IOW(VDUSE_BASE, 0x14, struct vduse_vq_config) + +/** + * struct vduse_vq_state_split - split virtqueue state + * @avail_index: available index + */ +struct vduse_vq_state_split { + __u16 avail_index; +}; + +/** + * struct vduse_vq_state_packed - packed virtqueue state + * @last_avail_counter: last driver ring wrap counter observed by device + * @last_avail_idx: device available index + * @last_used_counter: device ring wrap counter + * @last_used_idx: used index + */ +struct vduse_vq_state_packed { + __u16 last_avail_counter; + __u16 last_avail_idx; + __u16 last_used_counter; + __u16 last_used_idx; +}; + +/** + * struct vduse_vq_info - information of a virtqueue + * @index: virtqueue index + * @num: the size of virtqueue + * @desc_addr: address of desc area + * @driver_addr: address of driver area + * @device_addr: address of device area + * @split: split virtqueue state + * @packed: packed virtqueue state + * @ready: ready status of virtqueue + * + * Structure used by VDUSE_VQ_GET_INFO ioctl to get virtqueue's information. + */ +struct vduse_vq_info { + __u32 index; + __u32 num; + __u64 desc_addr; + __u64 driver_addr; + __u64 device_addr; + union { + struct vduse_vq_state_split split; + struct vduse_vq_state_packed packed; + }; + __u8 ready; +}; + +/* Get the specified virtqueue's information. Caller should set index field. */ +#define VDUSE_VQ_GET_INFO _IOWR(VDUSE_BASE, 0x15, struct vduse_vq_info) + +/** + * struct vduse_vq_eventfd - eventfd configuration for a virtqueue + * @index: virtqueue index + * @fd: eventfd, -1 means de-assigning the eventfd + * + * Structure used by VDUSE_VQ_SETUP_KICKFD ioctl to setup kick eventfd. + */ +struct vduse_vq_eventfd { + __u32 index; +#define VDUSE_EVENTFD_DEASSIGN -1 + int fd; +}; + +/* + * Setup kick eventfd for specified virtqueue. The kick eventfd is used + * by VDUSE kernel module to notify userspace to consume the avail vring. + */ +#define VDUSE_VQ_SETUP_KICKFD _IOW(VDUSE_BASE, 0x16, struct vduse_vq_eventfd) + +/* + * Inject an interrupt for specific virtqueue. It's used to notify virtio driver + * to consume the used vring. + */ +#define VDUSE_VQ_INJECT_IRQ _IOW(VDUSE_BASE, 0x17, __u32) + +/** + * struct vduse_iova_umem - userspace memory configuration for one IOVA region + * @uaddr: start address of userspace memory, it must be aligned to page size + * @iova: start of the IOVA region + * @size: size of the IOVA region + * @reserved: for future use, needs to be initialized to zero + * + * Structure used by VDUSE_IOTLB_REG_UMEM and VDUSE_IOTLB_DEREG_UMEM + * ioctls to register/de-register userspace memory for IOVA regions + */ +struct vduse_iova_umem { + __u64 uaddr; + __u64 iova; + __u64 size; + __u64 reserved[3]; +}; + +/* Register userspace memory for IOVA regions */ +#define VDUSE_IOTLB_REG_UMEM _IOW(VDUSE_BASE, 0x18, struct vduse_iova_umem) + +/* De-register the userspace memory. Caller should set iova and size field. */ +#define VDUSE_IOTLB_DEREG_UMEM _IOW(VDUSE_BASE, 0x19, struct vduse_iova_umem) + +/** + * struct vduse_iova_info - information of one IOVA region + * @start: start of the IOVA region + * @last: last of the IOVA region + * @capability: capability of the IOVA regsion + * @reserved: for future use, needs to be initialized to zero + * + * Structure used by VDUSE_IOTLB_GET_INFO ioctl to get information of + * one IOVA region. + */ +struct vduse_iova_info { + __u64 start; + __u64 last; +#define VDUSE_IOVA_CAP_UMEM (1 << 0) + __u64 capability; + __u64 reserved[3]; +}; + +/* + * Find the first IOVA region that overlaps with the range [start, last] + * and return some information on it. Caller should set start and last fields. + */ +#define VDUSE_IOTLB_GET_INFO _IOWR(VDUSE_BASE, 0x1a, struct vduse_iova_info) + +/* The control messages definition for read(2)/write(2) on /dev/vduse/$NAME */ + +/** + * enum vduse_req_type - request type + * @VDUSE_GET_VQ_STATE: get the state for specified virtqueue from userspace + * @VDUSE_SET_STATUS: set the device status + * @VDUSE_UPDATE_IOTLB: Notify userspace to update the memory mapping for + * specified IOVA range via VDUSE_IOTLB_GET_FD ioctl + */ +enum vduse_req_type { + VDUSE_GET_VQ_STATE, + VDUSE_SET_STATUS, + VDUSE_UPDATE_IOTLB, +}; + +/** + * struct vduse_vq_state - virtqueue state + * @index: virtqueue index + * @split: split virtqueue state + * @packed: packed virtqueue state + */ +struct vduse_vq_state { + __u32 index; + union { + struct vduse_vq_state_split split; + struct vduse_vq_state_packed packed; + }; +}; + +/** + * struct vduse_dev_status - device status + * @status: device status + */ +struct vduse_dev_status { + __u8 status; +}; + +/** + * struct vduse_iova_range - IOVA range [start, last] + * @start: start of the IOVA range + * @last: last of the IOVA range + */ +struct vduse_iova_range { + __u64 start; + __u64 last; +}; + +/** + * struct vduse_dev_request - control request + * @type: request type + * @request_id: request id + * @reserved: for future use + * @vq_state: virtqueue state, only index field is available + * @s: device status + * @iova: IOVA range for updating + * @padding: padding + * + * Structure used by read(2) on /dev/vduse/$NAME. + */ +struct vduse_dev_request { + __u32 type; + __u32 request_id; + __u32 reserved[4]; + union { + struct vduse_vq_state vq_state; + struct vduse_dev_status s; + struct vduse_iova_range iova; + __u32 padding[32]; + }; +}; + +/** + * struct vduse_dev_response - response to control request + * @request_id: corresponding request id + * @result: the result of request + * @reserved: for future use, needs to be initialized to zero + * @vq_state: virtqueue state + * @padding: padding + * + * Structure used by write(2) on /dev/vduse/$NAME. + */ +struct vduse_dev_response { + __u32 request_id; +#define VDUSE_REQ_RESULT_OK 0x00 +#define VDUSE_REQ_RESULT_FAILED 0x01 + __u32 result; + __u32 reserved[4]; + union { + struct vduse_vq_state vq_state; + __u32 padding[32]; + }; +}; + +#endif /* _VDUSE_H_ */ diff --git a/linux-headers/include/linux/version.h b/linux-headers/include/linux/version.h index 34b120faf1d..3a750914951 100644 --- a/linux-headers/include/linux/version.h +++ b/linux-headers/include/linux/version.h @@ -1,2 +1,5 @@ -#define LINUX_VERSION_CODE 330245 -#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c)) +#define LINUX_VERSION_CODE 394752 +#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + ((c) > 255 ? 255 : (c))) +#define LINUX_VERSION_MAJOR 6 +#define LINUX_VERSION_PATCHLEVEL 6 +#define LINUX_VERSION_SUBLEVEL 0 diff --git a/linux-headers/include/linux/vfio.h b/linux-headers/include/linux/vfio.h index b92dcc4dafd..acf72b4999f 100644 --- a/linux-headers/include/linux/vfio.h +++ b/linux-headers/include/linux/vfio.h @@ -46,6 +46,16 @@ */ #define VFIO_NOIOMMU_IOMMU 8 +/* Supports VFIO_DMA_UNMAP_FLAG_ALL */ +#define VFIO_UNMAP_ALL 9 + +/* + * Supports the vaddr flag for DMA map and unmap. Not supported for mediated + * devices, so this capability is subject to change as groups are added or + * removed. + */ +#define VFIO_UPDATE_VADDR 10 + /* * The IOCTL interface is designed for extensibility by embedding the * structure length (argsz) and flags into structures passed between @@ -203,9 +213,11 @@ struct vfio_device_info { #define VFIO_DEVICE_FLAGS_AP (1 << 5) /* vfio-ap device */ #define VFIO_DEVICE_FLAGS_FSL_MC (1 << 6) /* vfio-fsl-mc device */ #define VFIO_DEVICE_FLAGS_CAPS (1 << 7) /* Info supports caps */ +#define VFIO_DEVICE_FLAGS_CDX (1 << 8) /* vfio-cdx device */ __u32 num_regions; /* Max region index + 1 */ __u32 num_irqs; /* Max IRQ index + 1 */ __u32 cap_offset; /* Offset within info struct of first cap */ + __u32 pad; }; #define VFIO_DEVICE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 7) @@ -230,6 +242,20 @@ struct vfio_device_info { #define VFIO_DEVICE_INFO_CAP_ZPCI_UTIL 3 #define VFIO_DEVICE_INFO_CAP_ZPCI_PFIP 4 +/* + * The following VFIO_DEVICE_INFO capability reports support for PCIe AtomicOp + * completion to the root bus with supported widths provided via flags. + */ +#define VFIO_DEVICE_INFO_CAP_PCI_ATOMIC_COMP 5 +struct vfio_device_info_cap_pci_atomic_comp { + struct vfio_info_cap_header header; + __u32 flags; +#define VFIO_PCI_ATOMIC_COMP32 (1 << 0) +#define VFIO_PCI_ATOMIC_COMP64 (1 << 1) +#define VFIO_PCI_ATOMIC_COMP128 (1 << 2) + __u32 reserved; +}; + /** * VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8, * struct vfio_region_info) @@ -317,7 +343,7 @@ struct vfio_region_info_cap_type { #define VFIO_REGION_TYPE_PCI_VENDOR_MASK (0xffff) #define VFIO_REGION_TYPE_GFX (1) #define VFIO_REGION_TYPE_CCW (2) -#define VFIO_REGION_TYPE_MIGRATION (3) +#define VFIO_REGION_TYPE_MIGRATION_DEPRECATED (3) /* sub-types for VFIO_REGION_TYPE_PCI_* */ @@ -329,6 +355,8 @@ struct vfio_region_info_cap_type { /* 10de vendor PCI sub-types */ /* * NVIDIA GPU NVlink2 RAM is coherent RAM mapped onto the host address space. + * + * Deprecated, region no longer provided */ #define VFIO_REGION_SUBTYPE_NVIDIA_NVLINK2_RAM (1) @@ -336,6 +364,8 @@ struct vfio_region_info_cap_type { /* * IBM NPU NVlink2 ATSD (Address Translation Shootdown) register of NPU * to do TLB invalidation on a GPU. + * + * Deprecated, region no longer provided */ #define VFIO_REGION_SUBTYPE_IBM_NVLINK2_ATSD (1) @@ -395,225 +425,29 @@ struct vfio_region_gfx_edid { #define VFIO_REGION_SUBTYPE_CCW_CRW (3) /* sub-types for VFIO_REGION_TYPE_MIGRATION */ -#define VFIO_REGION_SUBTYPE_MIGRATION (1) - -/* - * The structure vfio_device_migration_info is placed at the 0th offset of - * the VFIO_REGION_SUBTYPE_MIGRATION region to get and set VFIO device related - * migration information. Field accesses from this structure are only supported - * at their native width and alignment. Otherwise, the result is undefined and - * vendor drivers should return an error. - * - * device_state: (read/write) - * - The user application writes to this field to inform the vendor driver - * about the device state to be transitioned to. - * - The vendor driver should take the necessary actions to change the - * device state. After successful transition to a given state, the - * vendor driver should return success on write(device_state, state) - * system call. If the device state transition fails, the vendor driver - * should return an appropriate -errno for the fault condition. - * - On the user application side, if the device state transition fails, - * that is, if write(device_state, state) returns an error, read - * device_state again to determine the current state of the device from - * the vendor driver. - * - The vendor driver should return previous state of the device unless - * the vendor driver has encountered an internal error, in which case - * the vendor driver may report the device_state VFIO_DEVICE_STATE_ERROR. - * - The user application must use the device reset ioctl to recover the - * device from VFIO_DEVICE_STATE_ERROR state. If the device is - * indicated to be in a valid device state by reading device_state, the - * user application may attempt to transition the device to any valid - * state reachable from the current state or terminate itself. - * - * device_state consists of 3 bits: - * - If bit 0 is set, it indicates the _RUNNING state. If bit 0 is clear, - * it indicates the _STOP state. When the device state is changed to - * _STOP, driver should stop the device before write() returns. - * - If bit 1 is set, it indicates the _SAVING state, which means that the - * driver should start gathering device state information that will be - * provided to the VFIO user application to save the device's state. - * - If bit 2 is set, it indicates the _RESUMING state, which means that - * the driver should prepare to resume the device. Data provided through - * the migration region should be used to resume the device. - * Bits 3 - 31 are reserved for future use. To preserve them, the user - * application should perform a read-modify-write operation on this - * field when modifying the specified bits. - * - * +------- _RESUMING - * |+------ _SAVING - * ||+----- _RUNNING - * ||| - * 000b => Device Stopped, not saving or resuming - * 001b => Device running, which is the default state - * 010b => Stop the device & save the device state, stop-and-copy state - * 011b => Device running and save the device state, pre-copy state - * 100b => Device stopped and the device state is resuming - * 101b => Invalid state - * 110b => Error state - * 111b => Invalid state - * - * State transitions: - * - * _RESUMING _RUNNING Pre-copy Stop-and-copy _STOP - * (100b) (001b) (011b) (010b) (000b) - * 0. Running or default state - * | - * - * 1. Normal Shutdown (optional) - * |------------------------------------->| - * - * 2. Save the state or suspend - * |------------------------->|---------->| - * - * 3. Save the state during live migration - * |----------->|------------>|---------->| - * - * 4. Resuming - * |<---------| - * - * 5. Resumed - * |--------->| - * - * 0. Default state of VFIO device is _RUNNING when the user application starts. - * 1. During normal shutdown of the user application, the user application may - * optionally change the VFIO device state from _RUNNING to _STOP. This - * transition is optional. The vendor driver must support this transition but - * must not require it. - * 2. When the user application saves state or suspends the application, the - * device state transitions from _RUNNING to stop-and-copy and then to _STOP. - * On state transition from _RUNNING to stop-and-copy, driver must stop the - * device, save the device state and send it to the application through the - * migration region. The sequence to be followed for such transition is given - * below. - * 3. In live migration of user application, the state transitions from _RUNNING - * to pre-copy, to stop-and-copy, and to _STOP. - * On state transition from _RUNNING to pre-copy, the driver should start - * gathering the device state while the application is still running and send - * the device state data to application through the migration region. - * On state transition from pre-copy to stop-and-copy, the driver must stop - * the device, save the device state and send it to the user application - * through the migration region. - * Vendor drivers must support the pre-copy state even for implementations - * where no data is provided to the user before the stop-and-copy state. The - * user must not be required to consume all migration data before the device - * transitions to a new state, including the stop-and-copy state. - * The sequence to be followed for above two transitions is given below. - * 4. To start the resuming phase, the device state should be transitioned from - * the _RUNNING to the _RESUMING state. - * In the _RESUMING state, the driver should use the device state data - * received through the migration region to resume the device. - * 5. After providing saved device data to the driver, the application should - * change the state from _RESUMING to _RUNNING. - * - * reserved: - * Reads on this field return zero and writes are ignored. - * - * pending_bytes: (read only) - * The number of pending bytes still to be migrated from the vendor driver. - * - * data_offset: (read only) - * The user application should read data_offset field from the migration - * region. The user application should read the device data from this - * offset within the migration region during the _SAVING state or write - * the device data during the _RESUMING state. See below for details of - * sequence to be followed. - * - * data_size: (read/write) - * The user application should read data_size to get the size in bytes of - * the data copied in the migration region during the _SAVING state and - * write the size in bytes of the data copied in the migration region - * during the _RESUMING state. - * - * The format of the migration region is as follows: - * ------------------------------------------------------------------ - * |vfio_device_migration_info| data section | - * | | /////////////////////////////// | - * ------------------------------------------------------------------ - * ^ ^ - * offset 0-trapped part data_offset - * - * The structure vfio_device_migration_info is always followed by the data - * section in the region, so data_offset will always be nonzero. The offset - * from where the data is copied is decided by the kernel driver. The data - * section can be trapped, mmapped, or partitioned, depending on how the kernel - * driver defines the data section. The data section partition can be defined - * as mapped by the sparse mmap capability. If mmapped, data_offset must be - * page aligned, whereas initial section which contains the - * vfio_device_migration_info structure, might not end at the offset, which is - * page aligned. The user is not required to access through mmap regardless - * of the capabilities of the region mmap. - * The vendor driver should determine whether and how to partition the data - * section. The vendor driver should return data_offset accordingly. - * - * The sequence to be followed while in pre-copy state and stop-and-copy state - * is as follows: - * a. Read pending_bytes, indicating the start of a new iteration to get device - * data. Repeated read on pending_bytes at this stage should have no side - * effects. - * If pending_bytes == 0, the user application should not iterate to get data - * for that device. - * If pending_bytes > 0, perform the following steps. - * b. Read data_offset, indicating that the vendor driver should make data - * available through the data section. The vendor driver should return this - * read operation only after data is available from (region + data_offset) - * to (region + data_offset + data_size). - * c. Read data_size, which is the amount of data in bytes available through - * the migration region. - * Read on data_offset and data_size should return the offset and size of - * the current buffer if the user application reads data_offset and - * data_size more than once here. - * d. Read data_size bytes of data from (region + data_offset) from the - * migration region. - * e. Process the data. - * f. Read pending_bytes, which indicates that the data from the previous - * iteration has been read. If pending_bytes > 0, go to step b. - * - * The user application can transition from the _SAVING|_RUNNING - * (pre-copy state) to the _SAVING (stop-and-copy) state regardless of the - * number of pending bytes. The user application should iterate in _SAVING - * (stop-and-copy) until pending_bytes is 0. - * - * The sequence to be followed while _RESUMING device state is as follows: - * While data for this device is available, repeat the following steps: - * a. Read data_offset from where the user application should write data. - * b. Write migration data starting at the migration region + data_offset for - * the length determined by data_size from the migration source. - * c. Write data_size, which indicates to the vendor driver that data is - * written in the migration region. Vendor driver must return this write - * operations on consuming data. Vendor driver should apply the - * user-provided migration region data to the device resume state. - * - * If an error occurs during the above sequences, the vendor driver can return - * an error code for next read() or write() operation, which will terminate the - * loop. The user application should then take the next necessary action, for - * example, failing migration or terminating the user application. - * - * For the user application, data is opaque. The user application should write - * data in the same order as the data is received and the data should be of - * same transaction size at the source. - */ +#define VFIO_REGION_SUBTYPE_MIGRATION_DEPRECATED (1) struct vfio_device_migration_info { __u32 device_state; /* VFIO device state */ -#define VFIO_DEVICE_STATE_STOP (0) -#define VFIO_DEVICE_STATE_RUNNING (1 << 0) -#define VFIO_DEVICE_STATE_SAVING (1 << 1) -#define VFIO_DEVICE_STATE_RESUMING (1 << 2) -#define VFIO_DEVICE_STATE_MASK (VFIO_DEVICE_STATE_RUNNING | \ - VFIO_DEVICE_STATE_SAVING | \ - VFIO_DEVICE_STATE_RESUMING) +#define VFIO_DEVICE_STATE_V1_STOP (0) +#define VFIO_DEVICE_STATE_V1_RUNNING (1 << 0) +#define VFIO_DEVICE_STATE_V1_SAVING (1 << 1) +#define VFIO_DEVICE_STATE_V1_RESUMING (1 << 2) +#define VFIO_DEVICE_STATE_MASK (VFIO_DEVICE_STATE_V1_RUNNING | \ + VFIO_DEVICE_STATE_V1_SAVING | \ + VFIO_DEVICE_STATE_V1_RESUMING) #define VFIO_DEVICE_STATE_VALID(state) \ - (state & VFIO_DEVICE_STATE_RESUMING ? \ - (state & VFIO_DEVICE_STATE_MASK) == VFIO_DEVICE_STATE_RESUMING : 1) + (state & VFIO_DEVICE_STATE_V1_RESUMING ? \ + (state & VFIO_DEVICE_STATE_MASK) == VFIO_DEVICE_STATE_V1_RESUMING : 1) #define VFIO_DEVICE_STATE_IS_ERROR(state) \ - ((state & VFIO_DEVICE_STATE_MASK) == (VFIO_DEVICE_STATE_SAVING | \ - VFIO_DEVICE_STATE_RESUMING)) + ((state & VFIO_DEVICE_STATE_MASK) == (VFIO_DEVICE_STATE_V1_SAVING | \ + VFIO_DEVICE_STATE_V1_RESUMING)) #define VFIO_DEVICE_STATE_SET_ERROR(state) \ - ((state & ~VFIO_DEVICE_STATE_MASK) | VFIO_DEVICE_SATE_SAVING | \ - VFIO_DEVICE_STATE_RESUMING) + ((state & ~VFIO_DEVICE_STATE_MASK) | VFIO_DEVICE_STATE_V1_SAVING | \ + VFIO_DEVICE_STATE_V1_RESUMING) __u32 reserved; __u64 pending_bytes; @@ -635,6 +469,8 @@ struct vfio_device_migration_info { * Capability with compressed real address (aka SSA - small system address) * where GPU RAM is mapped on a system bus. Used by a GPU for DMA routing * and by the userspace to associate a NVLink bridge with a GPU. + * + * Deprecated, capability no longer provided */ #define VFIO_REGION_INFO_CAP_NVLINK2_SSATGT 4 @@ -649,6 +485,8 @@ struct vfio_region_info_cap_nvlink2_ssatgt { * property in the device tree. The value is fixed in the hardware * and failing to provide the correct value results in the link * not working with no indication from the driver why. + * + * Deprecated, capability no longer provided */ #define VFIO_REGION_INFO_CAP_NVLINK2_LNKSPD 5 @@ -689,6 +527,9 @@ struct vfio_region_info_cap_nvlink2_lnkspd { * then add and unmask vectors, it's up to userspace to make the decision * whether to allocate the maximum supported number of vectors or tear * down setup and incrementally increase the vectors as each is enabled. + * Absence of the NORESIZE flag indicates that vectors can be enabled + * and disabled dynamically without impacting other vectors within the + * index. */ struct vfio_irq_info { __u32 argsz; @@ -820,18 +661,77 @@ enum { enum { VFIO_CCW_IO_IRQ_INDEX, VFIO_CCW_CRW_IRQ_INDEX, + VFIO_CCW_REQ_IRQ_INDEX, VFIO_CCW_NUM_IRQS }; +/* + * The vfio-ap bus driver makes use of the following IRQ index mapping. + * Unimplemented IRQ types return a count of zero. + */ +enum { + VFIO_AP_REQ_IRQ_INDEX, + VFIO_AP_NUM_IRQS +}; + /** - * VFIO_DEVICE_GET_PCI_HOT_RESET_INFO - _IORW(VFIO_TYPE, VFIO_BASE + 12, + * VFIO_DEVICE_GET_PCI_HOT_RESET_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 12, * struct vfio_pci_hot_reset_info) * + * This command is used to query the affected devices in the hot reset for + * a given device. + * + * This command always reports the segment, bus, and devfn information for + * each affected device, and selectively reports the group_id or devid per + * the way how the calling device is opened. + * + * - If the calling device is opened via the traditional group/container + * API, group_id is reported. User should check if it has owned all + * the affected devices and provides a set of group fds to prove the + * ownership in VFIO_DEVICE_PCI_HOT_RESET ioctl. + * + * - If the calling device is opened as a cdev, devid is reported. + * Flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID is set to indicate this + * data type. All the affected devices should be represented in + * the dev_set, ex. bound to a vfio driver, and also be owned by + * this interface which is determined by the following conditions: + * 1) Has a valid devid within the iommufd_ctx of the calling device. + * Ownership cannot be determined across separate iommufd_ctx and + * the cdev calling conventions do not support a proof-of-ownership + * model as provided in the legacy group interface. In this case + * valid devid with value greater than zero is provided in the return + * structure. + * 2) Does not have a valid devid within the iommufd_ctx of the calling + * device, but belongs to the same IOMMU group as the calling device + * or another opened device that has a valid devid within the + * iommufd_ctx of the calling device. This provides implicit ownership + * for devices within the same DMA isolation context. In this case + * the devid value of VFIO_PCI_DEVID_OWNED is provided in the return + * structure. + * + * A devid value of VFIO_PCI_DEVID_NOT_OWNED is provided in the return + * structure for affected devices where device is NOT represented in the + * dev_set or ownership is not available. Such devices prevent the use + * of VFIO_DEVICE_PCI_HOT_RESET ioctl outside of the proof-of-ownership + * calling conventions (ie. via legacy group accessed devices). Flag + * VFIO_PCI_HOT_RESET_FLAG_DEV_ID_OWNED would be set when all the + * affected devices are represented in the dev_set and also owned by + * the user. This flag is available only when + * flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID is set, otherwise reserved. + * When set, user could invoke VFIO_DEVICE_PCI_HOT_RESET with a zero + * length fd array on the calling device as the ownership is validated + * by iommufd_ctx. + * * Return: 0 on success, -errno on failure: * -enospc = insufficient buffer, -enodev = unsupported for device. */ struct vfio_pci_dependent_device { - __u32 group_id; + union { + __u32 group_id; + __u32 devid; +#define VFIO_PCI_DEVID_OWNED 0 +#define VFIO_PCI_DEVID_NOT_OWNED -1 + }; __u16 segment; __u8 bus; __u8 devfn; /* Use PCI_SLOT/PCI_FUNC */ @@ -840,6 +740,8 @@ struct vfio_pci_dependent_device { struct vfio_pci_hot_reset_info { __u32 argsz; __u32 flags; +#define VFIO_PCI_HOT_RESET_FLAG_DEV_ID (1 << 0) +#define VFIO_PCI_HOT_RESET_FLAG_DEV_ID_OWNED (1 << 1) __u32 count; struct vfio_pci_dependent_device devices[]; }; @@ -850,6 +752,24 @@ struct vfio_pci_hot_reset_info { * VFIO_DEVICE_PCI_HOT_RESET - _IOW(VFIO_TYPE, VFIO_BASE + 13, * struct vfio_pci_hot_reset) * + * A PCI hot reset results in either a bus or slot reset which may affect + * other devices sharing the bus/slot. The calling user must have + * ownership of the full set of affected devices as determined by the + * VFIO_DEVICE_GET_PCI_HOT_RESET_INFO ioctl. + * + * When called on a device file descriptor acquired through the vfio + * group interface, the user is required to provide proof of ownership + * of those affected devices via the group_fds array in struct + * vfio_pci_hot_reset. + * + * When called on a direct cdev opened vfio device, the flags field of + * struct vfio_pci_hot_reset_info reports the ownership status of the + * affected devices and this ioctl must be called with an empty group_fds + * array. See above INFO ioctl definition for ownership requirements. + * + * Mixed usage of legacy groups and cdevs across the set of affected + * devices is not supported. + * * Return: 0 on success, -errno on failure. */ struct vfio_pci_hot_reset { @@ -951,7 +871,7 @@ struct vfio_device_ioeventfd { #define VFIO_DEVICE_IOEVENTFD _IO(VFIO_TYPE, VFIO_BASE + 16) /** - * VFIO_DEVICE_FEATURE - _IORW(VFIO_TYPE, VFIO_BASE + 17, + * VFIO_DEVICE_FEATURE - _IOWR(VFIO_TYPE, VFIO_BASE + 17, * struct vfio_device_feature) * * Get, set, or probe feature data of the device. The feature is selected @@ -978,6 +898,83 @@ struct vfio_device_feature { #define VFIO_DEVICE_FEATURE _IO(VFIO_TYPE, VFIO_BASE + 17) +/* + * VFIO_DEVICE_BIND_IOMMUFD - _IOR(VFIO_TYPE, VFIO_BASE + 18, + * struct vfio_device_bind_iommufd) + * @argsz: User filled size of this data. + * @flags: Must be 0. + * @iommufd: iommufd to bind. + * @out_devid: The device id generated by this bind. devid is a handle for + * this device/iommufd bond and can be used in IOMMUFD commands. + * + * Bind a vfio_device to the specified iommufd. + * + * User is restricted from accessing the device before the binding operation + * is completed. Only allowed on cdev fds. + * + * Unbind is automatically conducted when device fd is closed. + * + * Return: 0 on success, -errno on failure. + */ +struct vfio_device_bind_iommufd { + __u32 argsz; + __u32 flags; + __s32 iommufd; + __u32 out_devid; +}; + +#define VFIO_DEVICE_BIND_IOMMUFD _IO(VFIO_TYPE, VFIO_BASE + 18) + +/* + * VFIO_DEVICE_ATTACH_IOMMUFD_PT - _IOW(VFIO_TYPE, VFIO_BASE + 19, + * struct vfio_device_attach_iommufd_pt) + * @argsz: User filled size of this data. + * @flags: Must be 0. + * @pt_id: Input the target id which can represent an ioas or a hwpt + * allocated via iommufd subsystem. + * Output the input ioas id or the attached hwpt id which could + * be the specified hwpt itself or a hwpt automatically created + * for the specified ioas by kernel during the attachment. + * + * Associate the device with an address space within the bound iommufd. + * Undo by VFIO_DEVICE_DETACH_IOMMUFD_PT or device fd close. This is only + * allowed on cdev fds. + * + * If a vfio device is currently attached to a valid hw_pagetable, without doing + * a VFIO_DEVICE_DETACH_IOMMUFD_PT, a second VFIO_DEVICE_ATTACH_IOMMUFD_PT ioctl + * passing in another hw_pagetable (hwpt) id is allowed. This action, also known + * as a hw_pagetable replacement, will replace the device's currently attached + * hw_pagetable with a new hw_pagetable corresponding to the given pt_id. + * + * Return: 0 on success, -errno on failure. + */ +struct vfio_device_attach_iommufd_pt { + __u32 argsz; + __u32 flags; + __u32 pt_id; +}; + +#define VFIO_DEVICE_ATTACH_IOMMUFD_PT _IO(VFIO_TYPE, VFIO_BASE + 19) + +/* + * VFIO_DEVICE_DETACH_IOMMUFD_PT - _IOW(VFIO_TYPE, VFIO_BASE + 20, + * struct vfio_device_detach_iommufd_pt) + * @argsz: User filled size of this data. + * @flags: Must be 0. + * + * Remove the association of the device and its current associated address + * space. After it, the device should be in a blocking DMA state. This is only + * allowed on cdev fds. + * + * Return: 0 on success, -errno on failure. + */ +struct vfio_device_detach_iommufd_pt { + __u32 argsz; + __u32 flags; +}; + +#define VFIO_DEVICE_DETACH_IOMMUFD_PT _IO(VFIO_TYPE, VFIO_BASE + 20) + /* * Provide support for setting a PCI VF Token, which is used as a shared * secret between PF and VF drivers. This feature may only be set on a @@ -987,6 +984,456 @@ struct vfio_device_feature { */ #define VFIO_DEVICE_FEATURE_PCI_VF_TOKEN (0) +/* + * Indicates the device can support the migration API through + * VFIO_DEVICE_FEATURE_MIG_DEVICE_STATE. If this GET succeeds, the RUNNING and + * ERROR states are always supported. Support for additional states is + * indicated via the flags field; at least VFIO_MIGRATION_STOP_COPY must be + * set. + * + * VFIO_MIGRATION_STOP_COPY means that STOP, STOP_COPY and + * RESUMING are supported. + * + * VFIO_MIGRATION_STOP_COPY | VFIO_MIGRATION_P2P means that RUNNING_P2P + * is supported in addition to the STOP_COPY states. + * + * VFIO_MIGRATION_STOP_COPY | VFIO_MIGRATION_PRE_COPY means that + * PRE_COPY is supported in addition to the STOP_COPY states. + * + * VFIO_MIGRATION_STOP_COPY | VFIO_MIGRATION_P2P | VFIO_MIGRATION_PRE_COPY + * means that RUNNING_P2P, PRE_COPY and PRE_COPY_P2P are supported + * in addition to the STOP_COPY states. + * + * Other combinations of flags have behavior to be defined in the future. + */ +struct vfio_device_feature_migration { + __aligned_u64 flags; +#define VFIO_MIGRATION_STOP_COPY (1 << 0) +#define VFIO_MIGRATION_P2P (1 << 1) +#define VFIO_MIGRATION_PRE_COPY (1 << 2) +}; +#define VFIO_DEVICE_FEATURE_MIGRATION 1 + +/* + * Upon VFIO_DEVICE_FEATURE_SET, execute a migration state change on the VFIO + * device. The new state is supplied in device_state, see enum + * vfio_device_mig_state for details + * + * The kernel migration driver must fully transition the device to the new state + * value before the operation returns to the user. + * + * The kernel migration driver must not generate asynchronous device state + * transitions outside of manipulation by the user or the VFIO_DEVICE_RESET + * ioctl as described above. + * + * If this function fails then current device_state may be the original + * operating state or some other state along the combination transition path. + * The user can then decide if it should execute a VFIO_DEVICE_RESET, attempt + * to return to the original state, or attempt to return to some other state + * such as RUNNING or STOP. + * + * If the new_state starts a new data transfer session then the FD associated + * with that session is returned in data_fd. The user is responsible to close + * this FD when it is finished. The user must consider the migration data stream + * carried over the FD to be opaque and must preserve the byte order of the + * stream. The user is not required to preserve buffer segmentation when writing + * the data stream during the RESUMING operation. + * + * Upon VFIO_DEVICE_FEATURE_GET, get the current migration state of the VFIO + * device, data_fd will be -1. + */ +struct vfio_device_feature_mig_state { + __u32 device_state; /* From enum vfio_device_mig_state */ + __s32 data_fd; +}; +#define VFIO_DEVICE_FEATURE_MIG_DEVICE_STATE 2 + +/* + * The device migration Finite State Machine is described by the enum + * vfio_device_mig_state. Some of the FSM arcs will create a migration data + * transfer session by returning a FD, in this case the migration data will + * flow over the FD using read() and write() as discussed below. + * + * There are 5 states to support VFIO_MIGRATION_STOP_COPY: + * RUNNING - The device is running normally + * STOP - The device does not change the internal or external state + * STOP_COPY - The device internal state can be read out + * RESUMING - The device is stopped and is loading a new internal state + * ERROR - The device has failed and must be reset + * + * And optional states to support VFIO_MIGRATION_P2P: + * RUNNING_P2P - RUNNING, except the device cannot do peer to peer DMA + * And VFIO_MIGRATION_PRE_COPY: + * PRE_COPY - The device is running normally but tracking internal state + * changes + * And VFIO_MIGRATION_P2P | VFIO_MIGRATION_PRE_COPY: + * PRE_COPY_P2P - PRE_COPY, except the device cannot do peer to peer DMA + * + * The FSM takes actions on the arcs between FSM states. The driver implements + * the following behavior for the FSM arcs: + * + * RUNNING_P2P -> STOP + * STOP_COPY -> STOP + * While in STOP the device must stop the operation of the device. The device + * must not generate interrupts, DMA, or any other change to external state. + * It must not change its internal state. When stopped the device and kernel + * migration driver must accept and respond to interaction to support external + * subsystems in the STOP state, for example PCI MSI-X and PCI config space. + * Failure by the user to restrict device access while in STOP must not result + * in error conditions outside the user context (ex. host system faults). + * + * The STOP_COPY arc will terminate a data transfer session. + * + * RESUMING -> STOP + * Leaving RESUMING terminates a data transfer session and indicates the + * device should complete processing of the data delivered by write(). The + * kernel migration driver should complete the incorporation of data written + * to the data transfer FD into the device internal state and perform + * final validity and consistency checking of the new device state. If the + * user provided data is found to be incomplete, inconsistent, or otherwise + * invalid, the migration driver must fail the SET_STATE ioctl and + * optionally go to the ERROR state as described below. + * + * While in STOP the device has the same behavior as other STOP states + * described above. + * + * To abort a RESUMING session the device must be reset. + * + * PRE_COPY -> RUNNING + * RUNNING_P2P -> RUNNING + * While in RUNNING the device is fully operational, the device may generate + * interrupts, DMA, respond to MMIO, all vfio device regions are functional, + * and the device may advance its internal state. + * + * The PRE_COPY arc will terminate a data transfer session. + * + * PRE_COPY_P2P -> RUNNING_P2P + * RUNNING -> RUNNING_P2P + * STOP -> RUNNING_P2P + * While in RUNNING_P2P the device is partially running in the P2P quiescent + * state defined below. + * + * The PRE_COPY_P2P arc will terminate a data transfer session. + * + * RUNNING -> PRE_COPY + * RUNNING_P2P -> PRE_COPY_P2P + * STOP -> STOP_COPY + * PRE_COPY, PRE_COPY_P2P and STOP_COPY form the "saving group" of states + * which share a data transfer session. Moving between these states alters + * what is streamed in session, but does not terminate or otherwise affect + * the associated fd. + * + * These arcs begin the process of saving the device state and will return a + * new data_fd. The migration driver may perform actions such as enabling + * dirty logging of device state when entering PRE_COPY or PER_COPY_P2P. + * + * Each arc does not change the device operation, the device remains + * RUNNING, P2P quiesced or in STOP. The STOP_COPY state is described below + * in PRE_COPY_P2P -> STOP_COPY. + * + * PRE_COPY -> PRE_COPY_P2P + * Entering PRE_COPY_P2P continues all the behaviors of PRE_COPY above. + * However, while in the PRE_COPY_P2P state, the device is partially running + * in the P2P quiescent state defined below, like RUNNING_P2P. + * + * PRE_COPY_P2P -> PRE_COPY + * This arc allows returning the device to a full RUNNING behavior while + * continuing all the behaviors of PRE_COPY. + * + * PRE_COPY_P2P -> STOP_COPY + * While in the STOP_COPY state the device has the same behavior as STOP + * with the addition that the data transfers session continues to stream the + * migration state. End of stream on the FD indicates the entire device + * state has been transferred. + * + * The user should take steps to restrict access to vfio device regions while + * the device is in STOP_COPY or risk corruption of the device migration data + * stream. + * + * STOP -> RESUMING + * Entering the RESUMING state starts a process of restoring the device state + * and will return a new data_fd. The data stream fed into the data_fd should + * be taken from the data transfer output of a single FD during saving from + * a compatible device. The migration driver may alter/reset the internal + * device state for this arc if required to prepare the device to receive the + * migration data. + * + * STOP_COPY -> PRE_COPY + * STOP_COPY -> PRE_COPY_P2P + * These arcs are not permitted and return error if requested. Future + * revisions of this API may define behaviors for these arcs, in this case + * support will be discoverable by a new flag in + * VFIO_DEVICE_FEATURE_MIGRATION. + * + * any -> ERROR + * ERROR cannot be specified as a device state, however any transition request + * can be failed with an errno return and may then move the device_state into + * ERROR. In this case the device was unable to execute the requested arc and + * was also unable to restore the device to any valid device_state. + * To recover from ERROR VFIO_DEVICE_RESET must be used to return the + * device_state back to RUNNING. + * + * The optional peer to peer (P2P) quiescent state is intended to be a quiescent + * state for the device for the purposes of managing multiple devices within a + * user context where peer-to-peer DMA between devices may be active. The + * RUNNING_P2P and PRE_COPY_P2P states must prevent the device from initiating + * any new P2P DMA transactions. If the device can identify P2P transactions + * then it can stop only P2P DMA, otherwise it must stop all DMA. The migration + * driver must complete any such outstanding operations prior to completing the + * FSM arc into a P2P state. For the purpose of specification the states + * behave as though the device was fully running if not supported. Like while in + * STOP or STOP_COPY the user must not touch the device, otherwise the state + * can be exited. + * + * The remaining possible transitions are interpreted as combinations of the + * above FSM arcs. As there are multiple paths through the FSM arcs the path + * should be selected based on the following rules: + * - Select the shortest path. + * - The path cannot have saving group states as interior arcs, only + * starting/end states. + * Refer to vfio_mig_get_next_state() for the result of the algorithm. + * + * The automatic transit through the FSM arcs that make up the combination + * transition is invisible to the user. When working with combination arcs the + * user may see any step along the path in the device_state if SET_STATE + * fails. When handling these types of errors users should anticipate future + * revisions of this protocol using new states and those states becoming + * visible in this case. + * + * The optional states cannot be used with SET_STATE if the device does not + * support them. The user can discover if these states are supported by using + * VFIO_DEVICE_FEATURE_MIGRATION. By using combination transitions the user can + * avoid knowing about these optional states if the kernel driver supports them. + * + * Arcs touching PRE_COPY and PRE_COPY_P2P are removed if support for PRE_COPY + * is not present. + */ +enum vfio_device_mig_state { + VFIO_DEVICE_STATE_ERROR = 0, + VFIO_DEVICE_STATE_STOP = 1, + VFIO_DEVICE_STATE_RUNNING = 2, + VFIO_DEVICE_STATE_STOP_COPY = 3, + VFIO_DEVICE_STATE_RESUMING = 4, + VFIO_DEVICE_STATE_RUNNING_P2P = 5, + VFIO_DEVICE_STATE_PRE_COPY = 6, + VFIO_DEVICE_STATE_PRE_COPY_P2P = 7, +}; + +/** + * VFIO_MIG_GET_PRECOPY_INFO - _IO(VFIO_TYPE, VFIO_BASE + 21) + * + * This ioctl is used on the migration data FD in the precopy phase of the + * migration data transfer. It returns an estimate of the current data sizes + * remaining to be transferred. It allows the user to judge when it is + * appropriate to leave PRE_COPY for STOP_COPY. + * + * This ioctl is valid only in PRE_COPY states and kernel driver should + * return -EINVAL from any other migration state. + * + * The vfio_precopy_info data structure returned by this ioctl provides + * estimates of data available from the device during the PRE_COPY states. + * This estimate is split into two categories, initial_bytes and + * dirty_bytes. + * + * The initial_bytes field indicates the amount of initial precopy + * data available from the device. This field should have a non-zero initial + * value and decrease as migration data is read from the device. + * It is recommended to leave PRE_COPY for STOP_COPY only after this field + * reaches zero. Leaving PRE_COPY earlier might make things slower. + * + * The dirty_bytes field tracks device state changes relative to data + * previously retrieved. This field starts at zero and may increase as + * the internal device state is modified or decrease as that modified + * state is read from the device. + * + * Userspace may use the combination of these fields to estimate the + * potential data size available during the PRE_COPY phases, as well as + * trends relative to the rate the device is dirtying its internal + * state, but these fields are not required to have any bearing relative + * to the data size available during the STOP_COPY phase. + * + * Drivers have a lot of flexibility in when and what they transfer during the + * PRE_COPY phase, and how they report this from VFIO_MIG_GET_PRECOPY_INFO. + * + * During pre-copy the migration data FD has a temporary "end of stream" that is + * reached when both initial_bytes and dirty_byte are zero. For instance, this + * may indicate that the device is idle and not currently dirtying any internal + * state. When read() is done on this temporary end of stream the kernel driver + * should return ENOMSG from read(). Userspace can wait for more data (which may + * never come) by using poll. + * + * Once in STOP_COPY the migration data FD has a permanent end of stream + * signaled in the usual way by read() always returning 0 and poll always + * returning readable. ENOMSG may not be returned in STOP_COPY. + * Support for this ioctl is mandatory if a driver claims to support + * VFIO_MIGRATION_PRE_COPY. + * + * Return: 0 on success, -1 and errno set on failure. + */ +struct vfio_precopy_info { + __u32 argsz; + __u32 flags; + __aligned_u64 initial_bytes; + __aligned_u64 dirty_bytes; +}; + +#define VFIO_MIG_GET_PRECOPY_INFO _IO(VFIO_TYPE, VFIO_BASE + 21) + +/* + * Upon VFIO_DEVICE_FEATURE_SET, allow the device to be moved into a low power + * state with the platform-based power management. Device use of lower power + * states depends on factors managed by the runtime power management core, + * including system level support and coordinating support among dependent + * devices. Enabling device low power entry does not guarantee lower power + * usage by the device, nor is a mechanism provided through this feature to + * know the current power state of the device. If any device access happens + * (either from the host or through the vfio uAPI) when the device is in the + * low power state, then the host will move the device out of the low power + * state as necessary prior to the access. Once the access is completed, the + * device may re-enter the low power state. For single shot low power support + * with wake-up notification, see + * VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY_WITH_WAKEUP below. Access to mmap'd + * device regions is disabled on LOW_POWER_ENTRY and may only be resumed after + * calling LOW_POWER_EXIT. + */ +#define VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY 3 + +/* + * This device feature has the same behavior as + * VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY with the exception that the user + * provides an eventfd for wake-up notification. When the device moves out of + * the low power state for the wake-up, the host will not allow the device to + * re-enter a low power state without a subsequent user call to one of the low + * power entry device feature IOCTLs. Access to mmap'd device regions is + * disabled on LOW_POWER_ENTRY_WITH_WAKEUP and may only be resumed after the + * low power exit. The low power exit can happen either through LOW_POWER_EXIT + * or through any other access (where the wake-up notification has been + * generated). The access to mmap'd device regions will not trigger low power + * exit. + * + * The notification through the provided eventfd will be generated only when + * the device has entered and is resumed from a low power state after + * calling this device feature IOCTL. A device that has not entered low power + * state, as managed through the runtime power management core, will not + * generate a notification through the provided eventfd on access. Calling the + * LOW_POWER_EXIT feature is optional in the case where notification has been + * signaled on the provided eventfd that a resume from low power has occurred. + */ +struct vfio_device_low_power_entry_with_wakeup { + __s32 wakeup_eventfd; + __u32 reserved; +}; + +#define VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY_WITH_WAKEUP 4 + +/* + * Upon VFIO_DEVICE_FEATURE_SET, disallow use of device low power states as + * previously enabled via VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY or + * VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY_WITH_WAKEUP device features. + * This device feature IOCTL may itself generate a wakeup eventfd notification + * in the latter case if the device had previously entered a low power state. + */ +#define VFIO_DEVICE_FEATURE_LOW_POWER_EXIT 5 + +/* + * Upon VFIO_DEVICE_FEATURE_SET start/stop device DMA logging. + * VFIO_DEVICE_FEATURE_PROBE can be used to detect if the device supports + * DMA logging. + * + * DMA logging allows a device to internally record what DMAs the device is + * initiating and report them back to userspace. It is part of the VFIO + * migration infrastructure that allows implementing dirty page tracking + * during the pre copy phase of live migration. Only DMA WRITEs are logged, + * and this API is not connected to VFIO_DEVICE_FEATURE_MIG_DEVICE_STATE. + * + * When DMA logging is started a range of IOVAs to monitor is provided and the + * device can optimize its logging to cover only the IOVA range given. Each + * DMA that the device initiates inside the range will be logged by the device + * for later retrieval. + * + * page_size is an input that hints what tracking granularity the device + * should try to achieve. If the device cannot do the hinted page size then + * it's the driver choice which page size to pick based on its support. + * On output the device will return the page size it selected. + * + * ranges is a pointer to an array of + * struct vfio_device_feature_dma_logging_range. + * + * The core kernel code guarantees to support by minimum num_ranges that fit + * into a single kernel page. User space can try higher values but should give + * up if the above can't be achieved as of some driver limitations. + * + * A single call to start device DMA logging can be issued and a matching stop + * should follow at the end. Another start is not allowed in the meantime. + */ +struct vfio_device_feature_dma_logging_control { + __aligned_u64 page_size; + __u32 num_ranges; + __u32 __reserved; + __aligned_u64 ranges; +}; + +struct vfio_device_feature_dma_logging_range { + __aligned_u64 iova; + __aligned_u64 length; +}; + +#define VFIO_DEVICE_FEATURE_DMA_LOGGING_START 6 + +/* + * Upon VFIO_DEVICE_FEATURE_SET stop device DMA logging that was started + * by VFIO_DEVICE_FEATURE_DMA_LOGGING_START + */ +#define VFIO_DEVICE_FEATURE_DMA_LOGGING_STOP 7 + +/* + * Upon VFIO_DEVICE_FEATURE_GET read back and clear the device DMA log + * + * Query the device's DMA log for written pages within the given IOVA range. + * During querying the log is cleared for the IOVA range. + * + * bitmap is a pointer to an array of u64s that will hold the output bitmap + * with 1 bit reporting a page_size unit of IOVA. The mapping of IOVA to bits + * is given by: + * bitmap[(addr - iova)/page_size] & (1ULL << (addr % 64)) + * + * The input page_size can be any power of two value and does not have to + * match the value given to VFIO_DEVICE_FEATURE_DMA_LOGGING_START. The driver + * will format its internal logging to match the reporting page size, possibly + * by replicating bits if the internal page size is lower than requested. + * + * The LOGGING_REPORT will only set bits in the bitmap and never clear or + * perform any initialization of the user provided bitmap. + * + * If any error is returned userspace should assume that the dirty log is + * corrupted. Error recovery is to consider all memory dirty and try to + * restart the dirty tracking, or to abort/restart the whole migration. + * + * If DMA logging is not enabled, an error will be returned. + * + */ +struct vfio_device_feature_dma_logging_report { + __aligned_u64 iova; + __aligned_u64 length; + __aligned_u64 page_size; + __aligned_u64 bitmap; +}; + +#define VFIO_DEVICE_FEATURE_DMA_LOGGING_REPORT 8 + +/* + * Upon VFIO_DEVICE_FEATURE_GET read back the estimated data length that will + * be required to complete stop copy. + * + * Note: Can be called on each device state. + */ + +struct vfio_device_feature_mig_data_size { + __aligned_u64 stop_copy_length; +}; + +#define VFIO_DEVICE_FEATURE_MIG_DATA_SIZE 9 + /* -------- API for Type1 VFIO IOMMU -------- */ /** @@ -1004,6 +1451,7 @@ struct vfio_iommu_type1_info { #define VFIO_IOMMU_INFO_CAPS (1 << 1) /* Info supports caps */ __u64 iova_pgsizes; /* Bitmap of supported page sizes */ __u32 cap_offset; /* Offset within info struct of first cap */ + __u32 pad; }; /* @@ -1073,12 +1521,21 @@ struct vfio_iommu_type1_info_dma_avail { * * Map process virtual addresses to IO virtual addresses using the * provided struct vfio_dma_map. Caller sets argsz. READ &/ WRITE required. + * + * If flags & VFIO_DMA_MAP_FLAG_VADDR, update the base vaddr for iova. The vaddr + * must have previously been invalidated with VFIO_DMA_UNMAP_FLAG_VADDR. To + * maintain memory consistency within the user application, the updated vaddr + * must address the same memory object as originally mapped. Failure to do so + * will result in user memory corruption and/or device misbehavior. iova and + * size must match those in the original MAP_DMA call. Protection is not + * changed, and the READ & WRITE flags must be 0. */ struct vfio_iommu_type1_dma_map { __u32 argsz; __u32 flags; #define VFIO_DMA_MAP_FLAG_READ (1 << 0) /* readable from device */ #define VFIO_DMA_MAP_FLAG_WRITE (1 << 1) /* writable from device */ +#define VFIO_DMA_MAP_FLAG_VADDR (1 << 2) __u64 vaddr; /* Process virtual address */ __u64 iova; /* IO virtual address */ __u64 size; /* Size of mapping (bytes) */ @@ -1101,6 +1558,7 @@ struct vfio_bitmap { * field. No guarantee is made to the user that arbitrary unmaps of iova * or size different from those used in the original mapping call will * succeed. + * * VFIO_DMA_UNMAP_FLAG_GET_DIRTY_BITMAP should be set to get the dirty bitmap * before unmapping IO virtual addresses. When this flag is set, the user must * provide a struct vfio_bitmap in data[]. User must provide zero-allocated @@ -1110,11 +1568,21 @@ struct vfio_bitmap { * indicates that the page at that offset from iova is dirty. A Bitmap of the * pages in the range of unmapped size is returned in the user-provided * vfio_bitmap.data. + * + * If flags & VFIO_DMA_UNMAP_FLAG_ALL, unmap all addresses. iova and size + * must be 0. This cannot be combined with the get-dirty-bitmap flag. + * + * If flags & VFIO_DMA_UNMAP_FLAG_VADDR, do not unmap, but invalidate host + * virtual addresses in the iova range. DMA to already-mapped pages continues. + * Groups may not be added to the container while any addresses are invalid. + * This cannot be combined with the get-dirty-bitmap flag. */ struct vfio_iommu_type1_dma_unmap { __u32 argsz; __u32 flags; #define VFIO_DMA_UNMAP_FLAG_GET_DIRTY_BITMAP (1 << 0) +#define VFIO_DMA_UNMAP_FLAG_ALL (1 << 1) +#define VFIO_DMA_UNMAP_FLAG_VADDR (1 << 2) __u64 iova; /* IO virtual address */ __u64 size; /* Size of mapping (bytes) */ __u8 data[]; diff --git a/linux-headers/include/linux/vfio_zdev.h b/linux-headers/include/linux/vfio_zdev.h index b4309397b6b..77f2aff1f27 100644 --- a/linux-headers/include/linux/vfio_zdev.h +++ b/linux-headers/include/linux/vfio_zdev.h @@ -29,6 +29,9 @@ struct vfio_device_info_cap_zpci_base { __u16 fmb_length; /* Measurement Block Length (in bytes) */ __u8 pft; /* PCI Function Type */ __u8 gid; /* PCI function group ID */ + /* End of version 1 */ + __u32 fh; /* PCI function handle */ + /* End of version 2 */ }; /** @@ -47,6 +50,10 @@ struct vfio_device_info_cap_zpci_group { __u16 noi; /* Maximum number of MSIs */ __u16 maxstbl; /* Maximum Store Block Length */ __u8 version; /* Supported PCI Version */ + /* End of version 1 */ + __u8 reserved; + __u16 imaxstbl; /* Maximum Interpreted Store Block Length */ + /* End of version 2 */ }; /** diff --git a/linux-headers/include/linux/vhost.h b/linux-headers/include/linux/vhost.h index c998860d7bb..f5c48b61ab6 100644 --- a/linux-headers/include/linux/vhost.h +++ b/linux-headers/include/linux/vhost.h @@ -45,6 +45,25 @@ #define VHOST_SET_LOG_BASE _IOW(VHOST_VIRTIO, 0x04, __u64) /* Specify an eventfd file descriptor to signal on log write. */ #define VHOST_SET_LOG_FD _IOW(VHOST_VIRTIO, 0x07, int) +/* By default, a device gets one vhost_worker that its virtqueues share. This + * command allows the owner of the device to create an additional vhost_worker + * for the device. It can later be bound to 1 or more of its virtqueues using + * the VHOST_ATTACH_VRING_WORKER command. + * + * This must be called after VHOST_SET_OWNER and the caller must be the owner + * of the device. The new thread will inherit caller's cgroups and namespaces, + * and will share the caller's memory space. The new thread will also be + * counted against the caller's RLIMIT_NPROC value. + * + * The worker's ID used in other commands will be returned in + * vhost_worker_state. + */ +#define VHOST_NEW_WORKER _IOR(VHOST_VIRTIO, 0x8, struct vhost_worker_state) +/* Free a worker created with VHOST_NEW_WORKER if it's not attached to any + * virtqueue. If userspace is not able to call this for workers its created, + * the kernel will free all the device's workers when the device is closed. + */ +#define VHOST_FREE_WORKER _IOW(VHOST_VIRTIO, 0x9, struct vhost_worker_state) /* Ring setup. */ /* Set number of descriptors in ring. This parameter can not @@ -70,6 +89,18 @@ #define VHOST_VRING_BIG_ENDIAN 1 #define VHOST_SET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x13, struct vhost_vring_state) #define VHOST_GET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x14, struct vhost_vring_state) +/* Attach a vhost_worker created with VHOST_NEW_WORKER to one of the device's + * virtqueues. + * + * This will replace the virtqueue's existing worker. If the replaced worker + * is no longer attached to any virtqueues, it can be freed with + * VHOST_FREE_WORKER. + */ +#define VHOST_ATTACH_VRING_WORKER _IOW(VHOST_VIRTIO, 0x15, \ + struct vhost_vring_worker) +/* Return the vring worker's ID */ +#define VHOST_GET_VRING_WORKER _IOWR(VHOST_VIRTIO, 0x16, \ + struct vhost_vring_worker) /* The following ioctls use eventfd file descriptors to signal and poll * for events. */ @@ -89,11 +120,6 @@ /* Set or get vhost backend capability */ -/* Use message type V2 */ -#define VHOST_BACKEND_F_IOTLB_MSG_V2 0x1 -/* IOTLB can accept batching hints */ -#define VHOST_BACKEND_F_IOTLB_BATCH 0x2 - #define VHOST_SET_BACKEND_FEATURES _IOW(VHOST_VIRTIO, 0x25, __u64) #define VHOST_GET_BACKEND_FEATURES _IOR(VHOST_VIRTIO, 0x26, __u64) @@ -150,4 +176,47 @@ /* Get the valid iova range */ #define VHOST_VDPA_GET_IOVA_RANGE _IOR(VHOST_VIRTIO, 0x78, \ struct vhost_vdpa_iova_range) +/* Get the config size */ +#define VHOST_VDPA_GET_CONFIG_SIZE _IOR(VHOST_VIRTIO, 0x79, __u32) + +/* Get the count of all virtqueues */ +#define VHOST_VDPA_GET_VQS_COUNT _IOR(VHOST_VIRTIO, 0x80, __u32) + +/* Get the number of virtqueue groups. */ +#define VHOST_VDPA_GET_GROUP_NUM _IOR(VHOST_VIRTIO, 0x81, __u32) + +/* Get the number of address spaces. */ +#define VHOST_VDPA_GET_AS_NUM _IOR(VHOST_VIRTIO, 0x7A, unsigned int) + +/* Get the group for a virtqueue: read index, write group in num, + * The virtqueue index is stored in the index field of + * vhost_vring_state. The group for this specific virtqueue is + * returned via num field of vhost_vring_state. + */ +#define VHOST_VDPA_GET_VRING_GROUP _IOWR(VHOST_VIRTIO, 0x7B, \ + struct vhost_vring_state) +/* Set the ASID for a virtqueue group. The group index is stored in + * the index field of vhost_vring_state, the ASID associated with this + * group is stored at num field of vhost_vring_state. + */ +#define VHOST_VDPA_SET_GROUP_ASID _IOW(VHOST_VIRTIO, 0x7C, \ + struct vhost_vring_state) + +/* Suspend a device so it does not process virtqueue requests anymore + * + * After the return of ioctl the device must preserve all the necessary state + * (the virtqueue vring base plus the possible device specific states) that is + * required for restoring in the future. The device must not change its + * configuration after that point. + */ +#define VHOST_VDPA_SUSPEND _IO(VHOST_VIRTIO, 0x7D) + +/* Resume a device so it can resume processing virtqueue requests + * + * After the return of this ioctl the device will have restored all the + * necessary states and it is fully operational to continue processing the + * virtqueue descriptors. + */ +#define VHOST_VDPA_RESUME _IO(VHOST_VIRTIO, 0x7E) + #endif diff --git a/linux-headers/include/linux/vhost_types.h b/linux-headers/include/linux/vhost_types.h index cb1b6f3c046..637ab7e1bd7 100644 --- a/linux-headers/include/linux/vhost_types.h +++ b/linux-headers/include/linux/vhost_types.h @@ -47,6 +47,22 @@ struct vhost_vring_addr { __u64 log_guest_addr; }; +struct vhost_worker_state { + /* + * For VHOST_NEW_WORKER the kernel will return the new vhost_worker id. + * For VHOST_FREE_WORKER this must be set to the id of the vhost_worker + * to free. + */ + unsigned int worker_id; +}; + +struct vhost_vring_worker { + /* vring index */ + unsigned int index; + /* The id of the vhost_worker returned from VHOST_NEW_WORKER */ + unsigned int worker_id; +}; + /* no alignment requirement */ struct vhost_iotlb_msg { __u64 iova; @@ -87,7 +103,7 @@ struct vhost_msg { struct vhost_msg_v2 { __u32 type; - __u32 reserved; + __u32 asid; union { struct vhost_iotlb_msg iotlb; __u8 padding[64]; @@ -107,7 +123,7 @@ struct vhost_memory_region { struct vhost_memory { __u32 nregions; __u32 padding; - struct vhost_memory_region regions[0]; + struct vhost_memory_region regions[]; }; /* VHOST_SCSI specific definitions */ @@ -135,7 +151,7 @@ struct vhost_scsi_target { struct vhost_vdpa_config { __u32 off; __u32 len; - __u8 buf[0]; + __u8 buf[]; }; /* vhost vdpa IOVA range @@ -153,4 +169,21 @@ struct vhost_vdpa_iova_range { /* vhost-net should add virtio_net_hdr for RX, and strip for TX packets. */ #define VHOST_NET_F_VIRTIO_NET_HDR 27 +/* Use message type V2 */ +#define VHOST_BACKEND_F_IOTLB_MSG_V2 0x1 +/* IOTLB can accept batching hints */ +#define VHOST_BACKEND_F_IOTLB_BATCH 0x2 +/* IOTLB can accept address space identifier through V2 type of IOTLB + * message + */ +#define VHOST_BACKEND_F_IOTLB_ASID 0x3 +/* Device can be suspended */ +#define VHOST_BACKEND_F_SUSPEND 0x4 +/* Device can be resumed */ +#define VHOST_BACKEND_F_RESUME 0x5 +/* Device supports the driver enabling virtqueues both before and after + * DRIVER_OK + */ +#define VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK 0x6 + #endif diff --git a/linux-headers/include/linux/videodev2.h b/linux-headers/include/linux/videodev2.h index a789dec7aca..47dbd68d435 100644 --- a/linux-headers/include/linux/videodev2.h +++ b/linux-headers/include/linux/videodev2.h @@ -219,9 +219,7 @@ enum v4l2_colorspace { V4L2_COLORSPACE_470_SYSTEM_M = 5, /* - * EBU Tech 3213 PAL/SECAM colorspace. This only makes sense when - * dealing with really old PAL/SECAM recordings. Superseded by - * SMPTE 170M. + * EBU Tech 3213 PAL/SECAM colorspace. */ V4L2_COLORSPACE_470_SYSTEM_BG = 6, @@ -245,6 +243,7 @@ enum v4l2_colorspace { /* DCI-P3 colorspace, used by cinema projectors */ V4L2_COLORSPACE_DCI_P3 = 12, + }; /* @@ -476,7 +475,6 @@ struct v4l2_capability { #define V4L2_CAP_META_CAPTURE 0x00800000 /* Is a metadata capture device */ #define V4L2_CAP_READWRITE 0x01000000 /* read/write systemcalls */ -#define V4L2_CAP_ASYNCIO 0x02000000 /* async I/O */ #define V4L2_CAP_STREAMING 0x04000000 /* streaming I/O ioctls */ #define V4L2_CAP_META_OUTPUT 0x08000000 /* Is a metadata output device */ @@ -511,7 +509,7 @@ struct v4l2_pix_format { /* Pixel format FOURCC depth Description */ -/* RGB formats */ +/* RGB formats (1 or 2 bytes per pixel) */ #define V4L2_PIX_FMT_RGB332 v4l2_fourcc('R', 'G', 'B', '1') /* 8 RGB-3-3-2 */ #define V4L2_PIX_FMT_RGB444 v4l2_fourcc('R', '4', '4', '4') /* 16 xxxxrrrr ggggbbbb */ #define V4L2_PIX_FMT_ARGB444 v4l2_fourcc('A', 'R', '1', '2') /* 16 aaaarrrr ggggbbbb */ @@ -520,12 +518,6 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_RGBX444 v4l2_fourcc('R', 'X', '1', '2') /* 16 rrrrgggg bbbbxxxx */ #define V4L2_PIX_FMT_ABGR444 v4l2_fourcc('A', 'B', '1', '2') /* 16 aaaabbbb ggggrrrr */ #define V4L2_PIX_FMT_XBGR444 v4l2_fourcc('X', 'B', '1', '2') /* 16 xxxxbbbb ggggrrrr */ - -/* - * Originally this had 'BA12' as fourcc, but this clashed with the older - * V4L2_PIX_FMT_SGRBG12 which inexplicably used that same fourcc. - * So use 'GA12' instead for V4L2_PIX_FMT_BGRA444. - */ #define V4L2_PIX_FMT_BGRA444 v4l2_fourcc('G', 'A', '1', '2') /* 16 bbbbgggg rrrraaaa */ #define V4L2_PIX_FMT_BGRX444 v4l2_fourcc('B', 'X', '1', '2') /* 16 bbbbgggg rrrrxxxx */ #define V4L2_PIX_FMT_RGB555 v4l2_fourcc('R', 'G', 'B', 'O') /* 16 RGB-5-5-5 */ @@ -542,6 +534,8 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_ARGB555X v4l2_fourcc_be('A', 'R', '1', '5') /* 16 ARGB-5-5-5 BE */ #define V4L2_PIX_FMT_XRGB555X v4l2_fourcc_be('X', 'R', '1', '5') /* 16 XRGB-5-5-5 BE */ #define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R', 'G', 'B', 'R') /* 16 RGB-5-6-5 BE */ + +/* RGB formats (3 or 4 bytes per pixel) */ #define V4L2_PIX_FMT_BGR666 v4l2_fourcc('B', 'G', 'R', 'H') /* 18 BGR-6-6-6 */ #define V4L2_PIX_FMT_BGR24 v4l2_fourcc('B', 'G', 'R', '3') /* 24 BGR-8-8-8 */ #define V4L2_PIX_FMT_RGB24 v4l2_fourcc('R', 'G', 'B', '3') /* 24 RGB-8-8-8 */ @@ -555,6 +549,13 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_RGBX32 v4l2_fourcc('X', 'B', '2', '4') /* 32 RGBX-8-8-8-8 */ #define V4L2_PIX_FMT_ARGB32 v4l2_fourcc('B', 'A', '2', '4') /* 32 ARGB-8-8-8-8 */ #define V4L2_PIX_FMT_XRGB32 v4l2_fourcc('B', 'X', '2', '4') /* 32 XRGB-8-8-8-8 */ +#define V4L2_PIX_FMT_RGBX1010102 v4l2_fourcc('R', 'X', '3', '0') /* 32 RGBX-10-10-10-2 */ +#define V4L2_PIX_FMT_RGBA1010102 v4l2_fourcc('R', 'A', '3', '0') /* 32 RGBA-10-10-10-2 */ +#define V4L2_PIX_FMT_ARGB2101010 v4l2_fourcc('A', 'R', '3', '0') /* 32 ARGB-2-10-10-10 */ + +/* RGB formats (6 or 8 bytes per pixel) */ +#define V4L2_PIX_FMT_BGR48_12 v4l2_fourcc('B', '3', '1', '2') /* 48 BGR 12-bit per component */ +#define V4L2_PIX_FMT_ABGR64_12 v4l2_fourcc('B', '4', '1', '2') /* 64 BGRA 12-bit per component */ /* Grey formats */ #define V4L2_PIX_FMT_GREY v4l2_fourcc('G', 'R', 'E', 'Y') /* 8 Greyscale */ @@ -562,6 +563,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_Y6 v4l2_fourcc('Y', '0', '6', ' ') /* 6 Greyscale */ #define V4L2_PIX_FMT_Y10 v4l2_fourcc('Y', '1', '0', ' ') /* 10 Greyscale */ #define V4L2_PIX_FMT_Y12 v4l2_fourcc('Y', '1', '2', ' ') /* 12 Greyscale */ +#define V4L2_PIX_FMT_Y012 v4l2_fourcc('Y', '0', '1', '2') /* 12 Greyscale */ #define V4L2_PIX_FMT_Y14 v4l2_fourcc('Y', '1', '4', ' ') /* 14 Greyscale */ #define V4L2_PIX_FMT_Y16 v4l2_fourcc('Y', '1', '6', ' ') /* 16 Greyscale */ #define V4L2_PIX_FMT_Y16_BE v4l2_fourcc_be('Y', '1', '6', ' ') /* 16 Greyscale BE */ @@ -569,6 +571,7 @@ struct v4l2_pix_format { /* Grey bit-packed formats */ #define V4L2_PIX_FMT_Y10BPACK v4l2_fourcc('Y', '1', '0', 'B') /* 10 Greyscale bit-packed */ #define V4L2_PIX_FMT_Y10P v4l2_fourcc('Y', '1', '0', 'P') /* 10 Greyscale, MIPI RAW10 packed */ +#define V4L2_PIX_FMT_IPU3_Y10 v4l2_fourcc('i', 'p', '3', 'y') /* IPU3 packed 10-bit greyscale */ /* Palette formats */ #define V4L2_PIX_FMT_PAL8 v4l2_fourcc('P', 'A', 'L', '8') /* 8 8-bit palette */ @@ -586,14 +589,24 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_YUV444 v4l2_fourcc('Y', '4', '4', '4') /* 16 xxxxyyyy uuuuvvvv */ #define V4L2_PIX_FMT_YUV555 v4l2_fourcc('Y', 'U', 'V', 'O') /* 16 YUV-5-5-5 */ #define V4L2_PIX_FMT_YUV565 v4l2_fourcc('Y', 'U', 'V', 'P') /* 16 YUV-5-6-5 */ +#define V4L2_PIX_FMT_YUV24 v4l2_fourcc('Y', 'U', 'V', '3') /* 24 YUV-8-8-8 */ #define V4L2_PIX_FMT_YUV32 v4l2_fourcc('Y', 'U', 'V', '4') /* 32 YUV-8-8-8-8 */ #define V4L2_PIX_FMT_AYUV32 v4l2_fourcc('A', 'Y', 'U', 'V') /* 32 AYUV-8-8-8-8 */ #define V4L2_PIX_FMT_XYUV32 v4l2_fourcc('X', 'Y', 'U', 'V') /* 32 XYUV-8-8-8-8 */ #define V4L2_PIX_FMT_VUYA32 v4l2_fourcc('V', 'U', 'Y', 'A') /* 32 VUYA-8-8-8-8 */ #define V4L2_PIX_FMT_VUYX32 v4l2_fourcc('V', 'U', 'Y', 'X') /* 32 VUYX-8-8-8-8 */ -#define V4L2_PIX_FMT_HI240 v4l2_fourcc('H', 'I', '2', '4') /* 8 8-bit color */ -#define V4L2_PIX_FMT_HM12 v4l2_fourcc('H', 'M', '1', '2') /* 8 YUV 4:2:0 16x16 macroblocks */ +#define V4L2_PIX_FMT_YUVA32 v4l2_fourcc('Y', 'U', 'V', 'A') /* 32 YUVA-8-8-8-8 */ +#define V4L2_PIX_FMT_YUVX32 v4l2_fourcc('Y', 'U', 'V', 'X') /* 32 YUVX-8-8-8-8 */ #define V4L2_PIX_FMT_M420 v4l2_fourcc('M', '4', '2', '0') /* 12 YUV 4:2:0 2 lines y, 1 line uv interleaved */ +#define V4L2_PIX_FMT_YUV48_12 v4l2_fourcc('Y', '3', '1', '2') /* 48 YUV 4:4:4 12-bit per component */ + +/* + * YCbCr packed format. For each Y2xx format, xx bits of valid data occupy the MSBs + * of the 16 bit components, and 16-xx bits of zero padding occupy the LSBs. + */ +#define V4L2_PIX_FMT_Y210 v4l2_fourcc('Y', '2', '1', '0') /* 32 YUYV 4:2:2 */ +#define V4L2_PIX_FMT_Y212 v4l2_fourcc('Y', '2', '1', '2') /* 32 YUYV 4:2:2 */ +#define V4L2_PIX_FMT_Y216 v4l2_fourcc('Y', '2', '1', '6') /* 32 YUYV 4:2:2 */ /* two planes -- one Y, one Cr + Cb interleaved */ #define V4L2_PIX_FMT_NV12 v4l2_fourcc('N', 'V', '1', '2') /* 12 Y/CbCr 4:2:0 */ @@ -602,14 +615,15 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_NV61 v4l2_fourcc('N', 'V', '6', '1') /* 16 Y/CrCb 4:2:2 */ #define V4L2_PIX_FMT_NV24 v4l2_fourcc('N', 'V', '2', '4') /* 24 Y/CbCr 4:4:4 */ #define V4L2_PIX_FMT_NV42 v4l2_fourcc('N', 'V', '4', '2') /* 24 Y/CrCb 4:4:4 */ +#define V4L2_PIX_FMT_P010 v4l2_fourcc('P', '0', '1', '0') /* 24 Y/CbCr 4:2:0 10-bit per component */ +#define V4L2_PIX_FMT_P012 v4l2_fourcc('P', '0', '1', '2') /* 24 Y/CbCr 4:2:0 12-bit per component */ /* two non contiguous planes - one Y, one Cr + Cb interleaved */ #define V4L2_PIX_FMT_NV12M v4l2_fourcc('N', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 */ #define V4L2_PIX_FMT_NV21M v4l2_fourcc('N', 'M', '2', '1') /* 21 Y/CrCb 4:2:0 */ #define V4L2_PIX_FMT_NV16M v4l2_fourcc('N', 'M', '1', '6') /* 16 Y/CbCr 4:2:2 */ #define V4L2_PIX_FMT_NV61M v4l2_fourcc('N', 'M', '6', '1') /* 16 Y/CrCb 4:2:2 */ -#define V4L2_PIX_FMT_NV12MT v4l2_fourcc('T', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 64x32 macroblocks */ -#define V4L2_PIX_FMT_NV12MT_16X16 v4l2_fourcc('V', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 16x16 macroblocks */ +#define V4L2_PIX_FMT_P012M v4l2_fourcc('P', 'M', '1', '2') /* 24 Y/CbCr 4:2:0 12-bit per component */ /* three planes - Y Cb, Cr */ #define V4L2_PIX_FMT_YUV410 v4l2_fourcc('Y', 'U', 'V', '9') /* 9 YUV 4:1:0 */ @@ -627,6 +641,21 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_YUV444M v4l2_fourcc('Y', 'M', '2', '4') /* 24 YUV444 planar */ #define V4L2_PIX_FMT_YVU444M v4l2_fourcc('Y', 'M', '4', '2') /* 24 YVU444 planar */ +/* Tiled YUV formats */ +#define V4L2_PIX_FMT_NV12_4L4 v4l2_fourcc('V', 'T', '1', '2') /* 12 Y/CbCr 4:2:0 4x4 tiles */ +#define V4L2_PIX_FMT_NV12_16L16 v4l2_fourcc('H', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 16x16 tiles */ +#define V4L2_PIX_FMT_NV12_32L32 v4l2_fourcc('S', 'T', '1', '2') /* 12 Y/CbCr 4:2:0 32x32 tiles */ +#define V4L2_PIX_FMT_NV15_4L4 v4l2_fourcc('V', 'T', '1', '5') /* 15 Y/CbCr 4:2:0 10-bit 4x4 tiles */ +#define V4L2_PIX_FMT_P010_4L4 v4l2_fourcc('T', '0', '1', '0') /* 12 Y/CbCr 4:2:0 10-bit 4x4 macroblocks */ +#define V4L2_PIX_FMT_NV12_8L128 v4l2_fourcc('A', 'T', '1', '2') /* Y/CbCr 4:2:0 8x128 tiles */ +#define V4L2_PIX_FMT_NV12_10BE_8L128 v4l2_fourcc_be('A', 'X', '1', '2') /* Y/CbCr 4:2:0 10-bit 8x128 tiles */ + +/* Tiled YUV formats, non contiguous planes */ +#define V4L2_PIX_FMT_NV12MT v4l2_fourcc('T', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 64x32 tiles */ +#define V4L2_PIX_FMT_NV12MT_16X16 v4l2_fourcc('V', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 16x16 tiles */ +#define V4L2_PIX_FMT_NV12M_8L128 v4l2_fourcc('N', 'A', '1', '2') /* Y/CbCr 4:2:0 8x128 tiles */ +#define V4L2_PIX_FMT_NV12M_10BE_8L128 v4l2_fourcc_be('N', 'T', '1', '2') /* Y/CbCr 4:2:0 10-bit 8x128 tiles */ + /* Bayer formats - see http://www.siliconimaging.com/RGB%20Bayer.htm */ #define V4L2_PIX_FMT_SBGGR8 v4l2_fourcc('B', 'A', '8', '1') /* 8 BGBG.. GRGR.. */ #define V4L2_PIX_FMT_SGBRG8 v4l2_fourcc('G', 'B', 'R', 'G') /* 8 GBGB.. RGRG.. */ @@ -695,10 +724,18 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_VC1_ANNEX_G v4l2_fourcc('V', 'C', '1', 'G') /* SMPTE 421M Annex G compliant stream */ #define V4L2_PIX_FMT_VC1_ANNEX_L v4l2_fourcc('V', 'C', '1', 'L') /* SMPTE 421M Annex L compliant stream */ #define V4L2_PIX_FMT_VP8 v4l2_fourcc('V', 'P', '8', '0') /* VP8 */ +#define V4L2_PIX_FMT_VP8_FRAME v4l2_fourcc('V', 'P', '8', 'F') /* VP8 parsed frame */ #define V4L2_PIX_FMT_VP9 v4l2_fourcc('V', 'P', '9', '0') /* VP9 */ +#define V4L2_PIX_FMT_VP9_FRAME v4l2_fourcc('V', 'P', '9', 'F') /* VP9 parsed frame */ #define V4L2_PIX_FMT_HEVC v4l2_fourcc('H', 'E', 'V', 'C') /* HEVC aka H.265 */ #define V4L2_PIX_FMT_FWHT v4l2_fourcc('F', 'W', 'H', 'T') /* Fast Walsh Hadamard Transform (vicodec) */ #define V4L2_PIX_FMT_FWHT_STATELESS v4l2_fourcc('S', 'F', 'W', 'H') /* Stateless FWHT (vicodec) */ +#define V4L2_PIX_FMT_H264_SLICE v4l2_fourcc('S', '2', '6', '4') /* H264 parsed slices */ +#define V4L2_PIX_FMT_HEVC_SLICE v4l2_fourcc('S', '2', '6', '5') /* HEVC parsed slices */ +#define V4L2_PIX_FMT_AV1_FRAME v4l2_fourcc('A', 'V', '1', 'F') /* AV1 parsed frame */ +#define V4L2_PIX_FMT_SPK v4l2_fourcc('S', 'P', 'K', '0') /* Sorenson Spark */ +#define V4L2_PIX_FMT_RV30 v4l2_fourcc('R', 'V', '3', '0') /* RealVideo 8 */ +#define V4L2_PIX_FMT_RV40 v4l2_fourcc('R', 'V', '4', '0') /* RealVideo 9 & 10 */ /* Vendor-specific formats */ #define V4L2_PIX_FMT_CPIA1 v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */ @@ -731,11 +768,17 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_Y12I v4l2_fourcc('Y', '1', '2', 'I') /* Greyscale 12-bit L/R interleaved */ #define V4L2_PIX_FMT_Z16 v4l2_fourcc('Z', '1', '6', ' ') /* Depth data 16-bit */ #define V4L2_PIX_FMT_MT21C v4l2_fourcc('M', 'T', '2', '1') /* Mediatek compressed block mode */ +#define V4L2_PIX_FMT_MM21 v4l2_fourcc('M', 'M', '2', '1') /* Mediatek 8-bit block mode, two non-contiguous planes */ +#define V4L2_PIX_FMT_MT2110T v4l2_fourcc('M', 'T', '2', 'T') /* Mediatek 10-bit block tile mode */ +#define V4L2_PIX_FMT_MT2110R v4l2_fourcc('M', 'T', '2', 'R') /* Mediatek 10-bit block raster mode */ #define V4L2_PIX_FMT_INZI v4l2_fourcc('I', 'N', 'Z', 'I') /* Intel Planar Greyscale 10-bit and Depth 16-bit */ -#define V4L2_PIX_FMT_SUNXI_TILED_NV12 v4l2_fourcc('S', 'T', '1', '2') /* Sunxi Tiled NV12 Format */ #define V4L2_PIX_FMT_CNF4 v4l2_fourcc('C', 'N', 'F', '4') /* Intel 4-bit packed depth confidence information */ +#define V4L2_PIX_FMT_HI240 v4l2_fourcc('H', 'I', '2', '4') /* BTTV 8-bit dithered RGB */ +#define V4L2_PIX_FMT_QC08C v4l2_fourcc('Q', '0', '8', 'C') /* Qualcomm 8-bit compressed */ +#define V4L2_PIX_FMT_QC10C v4l2_fourcc('Q', '1', '0', 'C') /* Qualcomm 10-bit compressed */ +#define V4L2_PIX_FMT_AJPG v4l2_fourcc('A', 'J', 'P', 'G') /* Aspeed JPEG */ -/* 10bit raw bayer packed, 32 bytes for every 25 pixels, last LSB 6 bits unused */ +/* 10bit raw packed, 32 bytes for every 25 pixels, last LSB 6 bits unused */ #define V4L2_PIX_FMT_IPU3_SBGGR10 v4l2_fourcc('i', 'p', '3', 'b') /* IPU3 packed 10-bit BGGR bayer */ #define V4L2_PIX_FMT_IPU3_SGBRG10 v4l2_fourcc('i', 'p', '3', 'g') /* IPU3 packed 10-bit GBRG bayer */ #define V4L2_PIX_FMT_IPU3_SGRBG10 v4l2_fourcc('i', 'p', '3', 'G') /* IPU3 packed 10-bit GRBG bayer */ @@ -764,6 +807,10 @@ struct v4l2_pix_format { #define V4L2_META_FMT_D4XX v4l2_fourcc('D', '4', 'X', 'X') /* D4XX Payload Header metadata */ #define V4L2_META_FMT_VIVID v4l2_fourcc('V', 'I', 'V', 'D') /* Vivid Metadata */ +/* Vendor specific - used for RK_ISP1 camera sub-system */ +#define V4L2_META_FMT_RK_ISP1_PARAMS v4l2_fourcc('R', 'K', '1', 'P') /* Rockchip ISP1 3A Parameters */ +#define V4L2_META_FMT_RK_ISP1_STAT_3A v4l2_fourcc('R', 'K', '1', 'S') /* Rockchip ISP1 3A Statistics */ + /* priv field value to indicates that subsequent fields are valid. */ #define V4L2_PIX_FMT_PRIV_MAGIC 0xfeedcafe @@ -929,9 +976,12 @@ struct v4l2_requestbuffers { __u32 type; /* enum v4l2_buf_type */ __u32 memory; /* enum v4l2_memory */ __u32 capabilities; - __u32 reserved[1]; + __u8 flags; + __u8 reserved[3]; }; +#define V4L2_MEMORY_FLAG_NON_COHERENT (1 << 0) + /* capabilities for struct v4l2_requestbuffers and v4l2_create_buffers */ #define V4L2_BUF_CAP_SUPPORTS_MMAP (1 << 0) #define V4L2_BUF_CAP_SUPPORTS_USERPTR (1 << 1) @@ -953,8 +1003,10 @@ struct v4l2_requestbuffers { * pointing to this plane * @fd: when memory is V4L2_MEMORY_DMABUF, a userspace file * descriptor associated with this plane + * @m: union of @mem_offset, @userptr and @fd * @data_offset: offset in the plane to the start of data; usually 0, * unless there is a header in front of the data + * @reserved: drivers and applications must zero this array * * Multi-planar buffers consist of one or more planes, e.g. an YCbCr buffer * with two planes can have one plane for Y, and another for interleaved CbCr @@ -996,10 +1048,14 @@ struct v4l2_plane { * a userspace file descriptor associated with this buffer * @planes: for multiplanar buffers; userspace pointer to the array of plane * info structs for this buffer + * @m: union of @offset, @userptr, @planes and @fd * @length: size in bytes of the buffer (NOT its payload) for single-plane * buffers (when type != *_MPLANE); number of elements in the * planes array for multi-plane buffers + * @reserved2: drivers and applications must zero this field * @request_fd: fd of the request that this buffer should use + * @reserved: for backwards compatibility with applications that do not know + * about @request_fd * * Contains data exchanged by application and driver using one of the Streaming * I/O methods. @@ -1032,7 +1088,7 @@ struct v4l2_buffer { /** * v4l2_timeval_to_ns - Convert timeval to nanoseconds - * @ts: pointer to the timeval variable to be converted + * @tv: pointer to the timeval variable to be converted * * Returns the scalar nanosecond representation of the timeval * parameter. @@ -1092,6 +1148,7 @@ static __inline__ __u64 v4l2_timeval_to_ns(const struct timeval *tv) * @flags: flags for newly created file, currently only O_CLOEXEC is * supported, refer to manual of open syscall for more details * @fd: file descriptor associated with DMABUF (set by driver) + * @reserved: drivers and applications must zero this array * * Contains data used for exporting a video buffer as DMABUF file descriptor. * The buffer is identified by a 'cookie' returned by VIDIOC_QUERYBUF @@ -1523,7 +1580,8 @@ struct v4l2_bt_timings { ((bt)->width + V4L2_DV_BT_BLANKING_WIDTH(bt)) #define V4L2_DV_BT_BLANKING_HEIGHT(bt) \ ((bt)->vfrontporch + (bt)->vsync + (bt)->vbackporch + \ - (bt)->il_vfrontporch + (bt)->il_vsync + (bt)->il_vbackporch) + ((bt)->interlaced ? \ + ((bt)->il_vfrontporch + (bt)->il_vsync + (bt)->il_vbackporch) : 0)) #define V4L2_DV_BT_FRAME_HEIGHT(bt) \ ((bt)->height + V4L2_DV_BT_BLANKING_HEIGHT(bt)) @@ -1614,7 +1672,7 @@ struct v4l2_input { __u8 name[32]; /* Label */ __u32 type; /* Type of input */ __u32 audioset; /* Associated audios (bitfield) */ - __u32 tuner; /* enum v4l2_tuner_type */ + __u32 tuner; /* Tuner index */ v4l2_std_id std; __u32 status; __u32 capabilities; @@ -1701,7 +1759,31 @@ struct v4l2_ext_control { __u8 *p_u8; __u16 *p_u16; __u32 *p_u32; + __s32 *p_s32; + __s64 *p_s64; struct v4l2_area *p_area; + struct v4l2_ctrl_h264_sps *p_h264_sps; + struct v4l2_ctrl_h264_pps *p_h264_pps; + struct v4l2_ctrl_h264_scaling_matrix *p_h264_scaling_matrix; + struct v4l2_ctrl_h264_pred_weights *p_h264_pred_weights; + struct v4l2_ctrl_h264_slice_params *p_h264_slice_params; + struct v4l2_ctrl_h264_decode_params *p_h264_decode_params; + struct v4l2_ctrl_fwht_params *p_fwht_params; + struct v4l2_ctrl_vp8_frame *p_vp8_frame; + struct v4l2_ctrl_mpeg2_sequence *p_mpeg2_sequence; + struct v4l2_ctrl_mpeg2_picture *p_mpeg2_picture; + struct v4l2_ctrl_mpeg2_quantisation *p_mpeg2_quantisation; + struct v4l2_ctrl_vp9_compressed_hdr *p_vp9_compressed_hdr_probs; + struct v4l2_ctrl_vp9_frame *p_vp9_frame; + struct v4l2_ctrl_hevc_sps *p_hevc_sps; + struct v4l2_ctrl_hevc_pps *p_hevc_pps; + struct v4l2_ctrl_hevc_slice_params *p_hevc_slice_params; + struct v4l2_ctrl_hevc_scaling_matrix *p_hevc_scaling_matrix; + struct v4l2_ctrl_hevc_decode_params *p_hevc_decode_params; + struct v4l2_ctrl_av1_sequence *p_av1_sequence; + struct v4l2_ctrl_av1_tile_group_entry *p_av1_tile_group_entry; + struct v4l2_ctrl_av1_frame *p_av1_frame; + struct v4l2_ctrl_av1_film_grain *p_av1_film_grain; void *ptr; }; } __attribute__ ((packed)); @@ -1744,6 +1826,38 @@ enum v4l2_ctrl_type { V4L2_CTRL_TYPE_U16 = 0x0101, V4L2_CTRL_TYPE_U32 = 0x0102, V4L2_CTRL_TYPE_AREA = 0x0106, + + V4L2_CTRL_TYPE_HDR10_CLL_INFO = 0x0110, + V4L2_CTRL_TYPE_HDR10_MASTERING_DISPLAY = 0x0111, + + V4L2_CTRL_TYPE_H264_SPS = 0x0200, + V4L2_CTRL_TYPE_H264_PPS = 0x0201, + V4L2_CTRL_TYPE_H264_SCALING_MATRIX = 0x0202, + V4L2_CTRL_TYPE_H264_SLICE_PARAMS = 0x0203, + V4L2_CTRL_TYPE_H264_DECODE_PARAMS = 0x0204, + V4L2_CTRL_TYPE_H264_PRED_WEIGHTS = 0x0205, + + V4L2_CTRL_TYPE_FWHT_PARAMS = 0x0220, + + V4L2_CTRL_TYPE_VP8_FRAME = 0x0240, + + V4L2_CTRL_TYPE_MPEG2_QUANTISATION = 0x0250, + V4L2_CTRL_TYPE_MPEG2_SEQUENCE = 0x0251, + V4L2_CTRL_TYPE_MPEG2_PICTURE = 0x0252, + + V4L2_CTRL_TYPE_VP9_COMPRESSED_HDR = 0x0260, + V4L2_CTRL_TYPE_VP9_FRAME = 0x0261, + + V4L2_CTRL_TYPE_HEVC_SPS = 0x0270, + V4L2_CTRL_TYPE_HEVC_PPS = 0x0271, + V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS = 0x0272, + V4L2_CTRL_TYPE_HEVC_SCALING_MATRIX = 0x0273, + V4L2_CTRL_TYPE_HEVC_DECODE_PARAMS = 0x0274, + + V4L2_CTRL_TYPE_AV1_SEQUENCE = 0x280, + V4L2_CTRL_TYPE_AV1_TILE_GROUP_ENTRY = 0x281, + V4L2_CTRL_TYPE_AV1_FRAME = 0x282, + V4L2_CTRL_TYPE_AV1_FILM_GRAIN = 0x283, }; /* Used in the VIDIOC_QUERYCTRL ioctl for querying controls */ @@ -1799,6 +1913,7 @@ struct v4l2_querymenu { #define V4L2_CTRL_FLAG_HAS_PAYLOAD 0x0100 #define V4L2_CTRL_FLAG_EXECUTE_ON_WRITE 0x0200 #define V4L2_CTRL_FLAG_MODIFY_LAYOUT 0x0400 +#define V4L2_CTRL_FLAG_DYNAMIC_ARRAY 0x0800 /* Query flags, to be ORed with the control ID */ #define V4L2_CTRL_FLAG_NEXT_CTRL 0x80000000 @@ -2181,6 +2296,7 @@ struct v4l2_mpeg_vbi_fmt_ivtv { * this plane will be used * @bytesperline: distance in bytes between the leftmost pixels in two * adjacent lines + * @reserved: drivers and applications must zero this array */ struct v4l2_plane_pix_format { __u32 sizeimage; @@ -2199,8 +2315,10 @@ struct v4l2_plane_pix_format { * @num_planes: number of planes for this format * @flags: format flags (V4L2_PIX_FMT_FLAG_*) * @ycbcr_enc: enum v4l2_ycbcr_encoding, Y'CbCr encoding + * @hsv_enc: enum v4l2_hsv_encoding, HSV encoding * @quantization: enum v4l2_quantization, colorspace quantization * @xfer_func: enum v4l2_xfer_func, colorspace transfer function + * @reserved: drivers and applications must zero this array */ struct v4l2_pix_format_mplane { __u32 width; @@ -2225,6 +2343,7 @@ struct v4l2_pix_format_mplane { * struct v4l2_sdr_format - SDR format definition * @pixelformat: little endian four character code (fourcc) * @buffersize: maximum size in bytes required for data + * @reserved: drivers and applications must zero this array */ struct v4l2_sdr_format { __u32 pixelformat; @@ -2251,6 +2370,8 @@ struct v4l2_meta_format { * @vbi: raw VBI capture or output parameters * @sliced: sliced VBI capture or output parameters * @raw_data: placeholder for future extensions and custom formats + * @fmt: union of @pix, @pix_mp, @win, @vbi, @sliced, @sdr, @meta + * and @raw_data */ struct v4l2_format { __u32 type; @@ -2300,6 +2421,7 @@ struct v4l2_event_vsync { #define V4L2_EVENT_CTRL_CH_VALUE (1 << 0) #define V4L2_EVENT_CTRL_CH_FLAGS (1 << 1) #define V4L2_EVENT_CTRL_CH_RANGE (1 << 2) +#define V4L2_EVENT_CTRL_CH_DIMENSIONS (1 << 3) struct v4l2_event_ctrl { __u32 changes; @@ -2419,6 +2541,9 @@ struct v4l2_dbg_chip_info { * @memory: enum v4l2_memory; buffer memory type * @format: frame format, for which buffers are requested * @capabilities: capabilities of this buffer type. + * @flags: additional buffer management attributes (ignored unless the + * queue has V4L2_BUF_CAP_SUPPORTS_MMAP_CACHE_HINTS capability + * and configured for MMAP streaming I/O). * @reserved: future extensions */ struct v4l2_create_buffers { @@ -2427,7 +2552,8 @@ struct v4l2_create_buffers { __u32 memory; struct v4l2_format format; __u32 capabilities; - __u32 reserved[7]; + __u32 flags; + __u32 reserved[6]; }; /* @@ -2535,4 +2661,13 @@ struct v4l2_create_buffers { #define BASE_VIDIOC_PRIVATE 192 /* 192-255 are private */ +/* Deprecated definitions kept for backwards compatibility */ +#define V4L2_PIX_FMT_HM12 V4L2_PIX_FMT_NV12_16L16 +#define V4L2_PIX_FMT_SUNXI_TILED_NV12 V4L2_PIX_FMT_NV12_32L32 +/* + * This capability was never implemented, anyone using this cap should drop it + * from their code. + */ +#define V4L2_CAP_ASYNCIO 0x02000000 + #endif /* __LINUX_VIDEODEV2_H */ diff --git a/linux-headers/include/linux/virtio_9p.h b/linux-headers/include/linux/virtio_9p.h index 44104743225..374b68f8ac6 100644 --- a/linux-headers/include/linux/virtio_9p.h +++ b/linux-headers/include/linux/virtio_9p.h @@ -38,7 +38,7 @@ struct virtio_9p_config { /* length of the tag name */ __virtio16 tag_len; /* non-NULL terminated tag name */ - __u8 tag[0]; + __u8 tag[]; } __attribute__((packed)); #endif /* _LINUX_VIRTIO_9P_H */ diff --git a/linux-headers/include/linux/virtio_blk.h b/linux-headers/include/linux/virtio_blk.h index 5ee57327a04..17f62f1e04f 100644 --- a/linux-headers/include/linux/virtio_blk.h +++ b/linux-headers/include/linux/virtio_blk.h @@ -40,6 +40,8 @@ #define VIRTIO_BLK_F_MQ 12 /* support more than one vq */ #define VIRTIO_BLK_F_DISCARD 13 /* DISCARD is supported */ #define VIRTIO_BLK_F_WRITE_ZEROES 14 /* WRITE ZEROES is supported */ +#define VIRTIO_BLK_F_SECURE_ERASE 16 /* Secure Erase is supported */ +#define VIRTIO_BLK_F_ZONED 17 /* Zoned block device */ /* Legacy feature bits */ #ifndef VIRTIO_BLK_NO_LEGACY @@ -119,6 +121,31 @@ struct virtio_blk_config { __u8 write_zeroes_may_unmap; __u8 unused1[3]; + + /* the next 3 entries are guarded by VIRTIO_BLK_F_SECURE_ERASE */ + /* + * The maximum secure erase sectors (in 512-byte sectors) for + * one segment. + */ + __virtio32 max_secure_erase_sectors; + /* + * The maximum number of secure erase segments in a + * secure erase command. + */ + __virtio32 max_secure_erase_seg; + /* Secure erase commands must be aligned to this number of sectors. */ + __virtio32 secure_erase_sector_alignment; + + /* Zoned block device characteristics (if VIRTIO_BLK_F_ZONED) */ + struct virtio_blk_zoned_characteristics { + __virtio32 zone_sectors; + __virtio32 max_open_zones; + __virtio32 max_active_zones; + __virtio32 max_append_sectors; + __virtio32 write_granularity; + __u8 model; + __u8 unused2[3]; + } zoned; } __attribute__((packed)); /* @@ -153,6 +180,30 @@ struct virtio_blk_config { /* Write zeroes command */ #define VIRTIO_BLK_T_WRITE_ZEROES 13 +/* Secure erase command */ +#define VIRTIO_BLK_T_SECURE_ERASE 14 + +/* Zone append command */ +#define VIRTIO_BLK_T_ZONE_APPEND 15 + +/* Report zones command */ +#define VIRTIO_BLK_T_ZONE_REPORT 16 + +/* Open zone command */ +#define VIRTIO_BLK_T_ZONE_OPEN 18 + +/* Close zone command */ +#define VIRTIO_BLK_T_ZONE_CLOSE 20 + +/* Finish zone command */ +#define VIRTIO_BLK_T_ZONE_FINISH 22 + +/* Reset zone command */ +#define VIRTIO_BLK_T_ZONE_RESET 24 + +/* Reset All zones command */ +#define VIRTIO_BLK_T_ZONE_RESET_ALL 26 + #ifndef VIRTIO_BLK_NO_LEGACY /* Barrier before this op. */ #define VIRTIO_BLK_T_BARRIER 0x80000000 @@ -172,6 +223,72 @@ struct virtio_blk_outhdr { __virtio64 sector; }; +/* + * Supported zoned device models. + */ + +/* Regular block device */ +#define VIRTIO_BLK_Z_NONE 0 +/* Host-managed zoned device */ +#define VIRTIO_BLK_Z_HM 1 +/* Host-aware zoned device */ +#define VIRTIO_BLK_Z_HA 2 + +/* + * Zone descriptor. A part of VIRTIO_BLK_T_ZONE_REPORT command reply. + */ +struct virtio_blk_zone_descriptor { + /* Zone capacity */ + __virtio64 z_cap; + /* The starting sector of the zone */ + __virtio64 z_start; + /* Zone write pointer position in sectors */ + __virtio64 z_wp; + /* Zone type */ + __u8 z_type; + /* Zone state */ + __u8 z_state; + __u8 reserved[38]; +}; + +struct virtio_blk_zone_report { + __virtio64 nr_zones; + __u8 reserved[56]; + struct virtio_blk_zone_descriptor zones[]; +}; + +/* + * Supported zone types. + */ + +/* Conventional zone */ +#define VIRTIO_BLK_ZT_CONV 1 +/* Sequential Write Required zone */ +#define VIRTIO_BLK_ZT_SWR 2 +/* Sequential Write Preferred zone */ +#define VIRTIO_BLK_ZT_SWP 3 + +/* + * Zone states that are available for zones of all types. + */ + +/* Not a write pointer (conventional zones only) */ +#define VIRTIO_BLK_ZS_NOT_WP 0 +/* Empty */ +#define VIRTIO_BLK_ZS_EMPTY 1 +/* Implicitly Open */ +#define VIRTIO_BLK_ZS_IOPEN 2 +/* Explicitly Open */ +#define VIRTIO_BLK_ZS_EOPEN 3 +/* Closed */ +#define VIRTIO_BLK_ZS_CLOSED 4 +/* Read-Only */ +#define VIRTIO_BLK_ZS_RDONLY 13 +/* Full */ +#define VIRTIO_BLK_ZS_FULL 14 +/* Offline */ +#define VIRTIO_BLK_ZS_OFFLINE 15 + /* Unmap this range (only valid for write zeroes command) */ #define VIRTIO_BLK_WRITE_ZEROES_FLAG_UNMAP 0x00000001 @@ -198,4 +315,11 @@ struct virtio_scsi_inhdr { #define VIRTIO_BLK_S_OK 0 #define VIRTIO_BLK_S_IOERR 1 #define VIRTIO_BLK_S_UNSUPP 2 + +/* Error codes that are specific to zoned block devices */ +#define VIRTIO_BLK_S_ZONE_INVALID_CMD 3 +#define VIRTIO_BLK_S_ZONE_UNALIGNED_WP 4 +#define VIRTIO_BLK_S_ZONE_OPEN_RESOURCE 5 +#define VIRTIO_BLK_S_ZONE_ACTIVE_RESOURCE 6 + #endif /* _LINUX_VIRTIO_BLK_H */ diff --git a/linux-headers/include/linux/virtio_bt.h b/linux-headers/include/linux/virtio_bt.h new file mode 100644 index 00000000000..4e609559b8f --- /dev/null +++ b/linux-headers/include/linux/virtio_bt.h @@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: BSD-3-Clause */ + +#ifndef _LINUX_VIRTIO_BT_H +#define _LINUX_VIRTIO_BT_H + +#include + +/* Feature bits */ +#define VIRTIO_BT_F_VND_HCI 0 /* Indicates vendor command support */ +#define VIRTIO_BT_F_MSFT_EXT 1 /* Indicates MSFT vendor support */ +#define VIRTIO_BT_F_AOSP_EXT 2 /* Indicates AOSP vendor support */ +#define VIRTIO_BT_F_CONFIG_V2 3 /* Use second version configuration */ + +enum virtio_bt_config_type { + VIRTIO_BT_CONFIG_TYPE_PRIMARY = 0, + VIRTIO_BT_CONFIG_TYPE_AMP = 1, +}; + +enum virtio_bt_config_vendor { + VIRTIO_BT_CONFIG_VENDOR_NONE = 0, + VIRTIO_BT_CONFIG_VENDOR_ZEPHYR = 1, + VIRTIO_BT_CONFIG_VENDOR_INTEL = 2, + VIRTIO_BT_CONFIG_VENDOR_REALTEK = 3, +}; + +struct virtio_bt_config { + __u8 type; + __u16 vendor; + __u16 msft_opcode; +} __attribute__((packed)); + +struct virtio_bt_config_v2 { + __u8 type; + __u8 alignment; + __u16 vendor; + __u16 msft_opcode; +}; + +#endif /* _LINUX_VIRTIO_BT_H */ diff --git a/linux-headers/include/linux/virtio_config.h b/linux-headers/include/linux/virtio_config.h index 3bf6c8bf847..94a30195428 100644 --- a/linux-headers/include/linux/virtio_config.h +++ b/linux-headers/include/linux/virtio_config.h @@ -52,7 +52,7 @@ * rest are per-device feature bits. */ #define VIRTIO_TRANSPORT_F_START 28 -#define VIRTIO_TRANSPORT_F_END 38 +#define VIRTIO_TRANSPORT_F_END 41 #ifndef VIRTIO_CONFIG_NO_LEGACY /* Do we get callbacks when the ring is completely used, even if we've @@ -80,6 +80,12 @@ /* This feature indicates support for the packed virtqueue layout. */ #define VIRTIO_F_RING_PACKED 34 +/* + * Inorder feature indicates that all buffers are used by the device + * in the same order in which they have been made available. + */ +#define VIRTIO_F_IN_ORDER 35 + /* * This feature indicates that memory accesses by the driver and the * device are ordered in a way described by the platform. @@ -90,4 +96,15 @@ * Does the device support Single Root I/O Virtualization? */ #define VIRTIO_F_SR_IOV 37 + +/* + * This feature indicates that the driver passes extra data (besides + * identifying the virtqueue) in its device notifications. + */ +#define VIRTIO_F_NOTIFICATION_DATA 38 + +/* + * This feature indicates that the driver can reset a queue individually. + */ +#define VIRTIO_F_RING_RESET 40 #endif /* _LINUX_VIRTIO_CONFIG_H */ diff --git a/linux-headers/include/linux/virtio_crypto.h b/linux-headers/include/linux/virtio_crypto.h index a03932f1056..71a54a6849c 100644 --- a/linux-headers/include/linux/virtio_crypto.h +++ b/linux-headers/include/linux/virtio_crypto.h @@ -37,6 +37,7 @@ #define VIRTIO_CRYPTO_SERVICE_HASH 1 #define VIRTIO_CRYPTO_SERVICE_MAC 2 #define VIRTIO_CRYPTO_SERVICE_AEAD 3 +#define VIRTIO_CRYPTO_SERVICE_AKCIPHER 4 #define VIRTIO_CRYPTO_OPCODE(service, op) (((service) << 8) | (op)) @@ -57,6 +58,10 @@ struct virtio_crypto_ctrl_header { VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x02) #define VIRTIO_CRYPTO_AEAD_DESTROY_SESSION \ VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x03) +#define VIRTIO_CRYPTO_AKCIPHER_CREATE_SESSION \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x04) +#define VIRTIO_CRYPTO_AKCIPHER_DESTROY_SESSION \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x05) __le32 opcode; __le32 algo; __le32 flag; @@ -180,6 +185,58 @@ struct virtio_crypto_aead_create_session_req { __u8 padding[32]; }; +struct virtio_crypto_rsa_session_para { +#define VIRTIO_CRYPTO_RSA_RAW_PADDING 0 +#define VIRTIO_CRYPTO_RSA_PKCS1_PADDING 1 + __le32 padding_algo; + +#define VIRTIO_CRYPTO_RSA_NO_HASH 0 +#define VIRTIO_CRYPTO_RSA_MD2 1 +#define VIRTIO_CRYPTO_RSA_MD3 2 +#define VIRTIO_CRYPTO_RSA_MD4 3 +#define VIRTIO_CRYPTO_RSA_MD5 4 +#define VIRTIO_CRYPTO_RSA_SHA1 5 +#define VIRTIO_CRYPTO_RSA_SHA256 6 +#define VIRTIO_CRYPTO_RSA_SHA384 7 +#define VIRTIO_CRYPTO_RSA_SHA512 8 +#define VIRTIO_CRYPTO_RSA_SHA224 9 + __le32 hash_algo; +}; + +struct virtio_crypto_ecdsa_session_para { +#define VIRTIO_CRYPTO_CURVE_UNKNOWN 0 +#define VIRTIO_CRYPTO_CURVE_NIST_P192 1 +#define VIRTIO_CRYPTO_CURVE_NIST_P224 2 +#define VIRTIO_CRYPTO_CURVE_NIST_P256 3 +#define VIRTIO_CRYPTO_CURVE_NIST_P384 4 +#define VIRTIO_CRYPTO_CURVE_NIST_P521 5 + __le32 curve_id; + __le32 padding; +}; + +struct virtio_crypto_akcipher_session_para { +#define VIRTIO_CRYPTO_NO_AKCIPHER 0 +#define VIRTIO_CRYPTO_AKCIPHER_RSA 1 +#define VIRTIO_CRYPTO_AKCIPHER_DSA 2 +#define VIRTIO_CRYPTO_AKCIPHER_ECDSA 3 + __le32 algo; + +#define VIRTIO_CRYPTO_AKCIPHER_KEY_TYPE_PUBLIC 1 +#define VIRTIO_CRYPTO_AKCIPHER_KEY_TYPE_PRIVATE 2 + __le32 keytype; + __le32 keylen; + + union { + struct virtio_crypto_rsa_session_para rsa; + struct virtio_crypto_ecdsa_session_para ecdsa; + } u; +}; + +struct virtio_crypto_akcipher_create_session_req { + struct virtio_crypto_akcipher_session_para para; + __u8 padding[36]; +}; + struct virtio_crypto_alg_chain_session_para { #define VIRTIO_CRYPTO_SYM_ALG_CHAIN_ORDER_HASH_THEN_CIPHER 1 #define VIRTIO_CRYPTO_SYM_ALG_CHAIN_ORDER_CIPHER_THEN_HASH 2 @@ -247,6 +304,8 @@ struct virtio_crypto_op_ctrl_req { mac_create_session; struct virtio_crypto_aead_create_session_req aead_create_session; + struct virtio_crypto_akcipher_create_session_req + akcipher_create_session; struct virtio_crypto_destroy_session_req destroy_session; __u8 padding[56]; @@ -266,6 +325,14 @@ struct virtio_crypto_op_header { VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x00) #define VIRTIO_CRYPTO_AEAD_DECRYPT \ VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x01) +#define VIRTIO_CRYPTO_AKCIPHER_ENCRYPT \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x00) +#define VIRTIO_CRYPTO_AKCIPHER_DECRYPT \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x01) +#define VIRTIO_CRYPTO_AKCIPHER_SIGN \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x02) +#define VIRTIO_CRYPTO_AKCIPHER_VERIFY \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x03) __le32 opcode; /* algo should be service-specific algorithms */ __le32 algo; @@ -390,6 +457,16 @@ struct virtio_crypto_aead_data_req { __u8 padding[32]; }; +struct virtio_crypto_akcipher_para { + __le32 src_data_len; + __le32 dst_data_len; +}; + +struct virtio_crypto_akcipher_data_req { + struct virtio_crypto_akcipher_para para; + __u8 padding[40]; +}; + /* The request of the data virtqueue's packet */ struct virtio_crypto_op_data_req { struct virtio_crypto_op_header header; @@ -399,6 +476,7 @@ struct virtio_crypto_op_data_req { struct virtio_crypto_hash_data_req hash_req; struct virtio_crypto_mac_data_req mac_req; struct virtio_crypto_aead_data_req aead_req; + struct virtio_crypto_akcipher_data_req akcipher_req; __u8 padding[48]; } u; }; @@ -408,6 +486,8 @@ struct virtio_crypto_op_data_req { #define VIRTIO_CRYPTO_BADMSG 2 #define VIRTIO_CRYPTO_NOTSUPP 3 #define VIRTIO_CRYPTO_INVSESS 4 /* Invalid session id */ +#define VIRTIO_CRYPTO_NOSPC 5 /* no free session ID */ +#define VIRTIO_CRYPTO_KEY_REJECTED 6 /* Signature verification failed */ /* The accelerator hardware is ready */ #define VIRTIO_CRYPTO_S_HW_READY (1 << 0) @@ -438,7 +518,7 @@ struct virtio_crypto_config { __le32 max_cipher_key_len; /* Maximum length of authenticated key */ __le32 max_auth_key_len; - __le32 reserve; + __le32 akcipher_algo; /* Maximum size of each crypto request's content */ __le64 max_size; }; diff --git a/linux-headers/include/linux/virtio_gpio.h b/linux-headers/include/linux/virtio_gpio.h new file mode 100644 index 00000000000..d4b29d9a39d --- /dev/null +++ b/linux-headers/include/linux/virtio_gpio.h @@ -0,0 +1,72 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ + +#ifndef _LINUX_VIRTIO_GPIO_H +#define _LINUX_VIRTIO_GPIO_H + +#include + +/* Virtio GPIO Feature bits */ +#define VIRTIO_GPIO_F_IRQ 0 + +/* Virtio GPIO request types */ +#define VIRTIO_GPIO_MSG_GET_NAMES 0x0001 +#define VIRTIO_GPIO_MSG_GET_DIRECTION 0x0002 +#define VIRTIO_GPIO_MSG_SET_DIRECTION 0x0003 +#define VIRTIO_GPIO_MSG_GET_VALUE 0x0004 +#define VIRTIO_GPIO_MSG_SET_VALUE 0x0005 +#define VIRTIO_GPIO_MSG_IRQ_TYPE 0x0006 + +/* Possible values of the status field */ +#define VIRTIO_GPIO_STATUS_OK 0x0 +#define VIRTIO_GPIO_STATUS_ERR 0x1 + +/* Direction types */ +#define VIRTIO_GPIO_DIRECTION_NONE 0x00 +#define VIRTIO_GPIO_DIRECTION_OUT 0x01 +#define VIRTIO_GPIO_DIRECTION_IN 0x02 + +/* Virtio GPIO IRQ types */ +#define VIRTIO_GPIO_IRQ_TYPE_NONE 0x00 +#define VIRTIO_GPIO_IRQ_TYPE_EDGE_RISING 0x01 +#define VIRTIO_GPIO_IRQ_TYPE_EDGE_FALLING 0x02 +#define VIRTIO_GPIO_IRQ_TYPE_EDGE_BOTH 0x03 +#define VIRTIO_GPIO_IRQ_TYPE_LEVEL_HIGH 0x04 +#define VIRTIO_GPIO_IRQ_TYPE_LEVEL_LOW 0x08 + +struct virtio_gpio_config { + __le16 ngpio; + __u8 padding[2]; + __le32 gpio_names_size; +}; + +/* Virtio GPIO Request / Response */ +struct virtio_gpio_request { + __le16 type; + __le16 gpio; + __le32 value; +}; + +struct virtio_gpio_response { + __u8 status; + __u8 value; +}; + +struct virtio_gpio_response_get_names { + __u8 status; + __u8 value[]; +}; + +/* Virtio GPIO IRQ Request / Response */ +struct virtio_gpio_irq_request { + __le16 gpio; +}; + +struct virtio_gpio_irq_response { + __u8 status; +}; + +/* Possible values of the interrupt status field */ +#define VIRTIO_GPIO_IRQ_STATUS_INVALID 0x0 +#define VIRTIO_GPIO_IRQ_STATUS_VALID 0x1 + +#endif /* _LINUX_VIRTIO_GPIO_H */ diff --git a/linux-headers/include/linux/virtio_gpu.h b/linux-headers/include/linux/virtio_gpu.h index 747a5c5cc4e..f556fde07b7 100644 --- a/linux-headers/include/linux/virtio_gpu.h +++ b/linux-headers/include/linux/virtio_gpu.h @@ -55,6 +55,16 @@ */ #define VIRTIO_GPU_F_RESOURCE_UUID 2 +/* + * VIRTIO_GPU_CMD_RESOURCE_CREATE_BLOB + */ +#define VIRTIO_GPU_F_RESOURCE_BLOB 3 +/* + * VIRTIO_GPU_CMD_CREATE_CONTEXT with + * context_init and multiple timelines + */ +#define VIRTIO_GPU_F_CONTEXT_INIT 4 + enum virtio_gpu_ctrl_type { VIRTIO_GPU_UNDEFINED = 0, @@ -71,6 +81,8 @@ enum virtio_gpu_ctrl_type { VIRTIO_GPU_CMD_GET_CAPSET, VIRTIO_GPU_CMD_GET_EDID, VIRTIO_GPU_CMD_RESOURCE_ASSIGN_UUID, + VIRTIO_GPU_CMD_RESOURCE_CREATE_BLOB, + VIRTIO_GPU_CMD_SET_SCANOUT_BLOB, /* 3d commands */ VIRTIO_GPU_CMD_CTX_CREATE = 0x0200, @@ -81,6 +93,8 @@ enum virtio_gpu_ctrl_type { VIRTIO_GPU_CMD_TRANSFER_TO_HOST_3D, VIRTIO_GPU_CMD_TRANSFER_FROM_HOST_3D, VIRTIO_GPU_CMD_SUBMIT_3D, + VIRTIO_GPU_CMD_RESOURCE_MAP_BLOB, + VIRTIO_GPU_CMD_RESOURCE_UNMAP_BLOB, /* cursor commands */ VIRTIO_GPU_CMD_UPDATE_CURSOR = 0x0300, @@ -93,6 +107,7 @@ enum virtio_gpu_ctrl_type { VIRTIO_GPU_RESP_OK_CAPSET, VIRTIO_GPU_RESP_OK_EDID, VIRTIO_GPU_RESP_OK_RESOURCE_UUID, + VIRTIO_GPU_RESP_OK_MAP_INFO, /* error responses */ VIRTIO_GPU_RESP_ERR_UNSPEC = 0x1200, @@ -103,14 +118,29 @@ enum virtio_gpu_ctrl_type { VIRTIO_GPU_RESP_ERR_INVALID_PARAMETER, }; -#define VIRTIO_GPU_FLAG_FENCE (1 << 0) +enum virtio_gpu_shm_id { + VIRTIO_GPU_SHM_ID_UNDEFINED = 0, + /* + * VIRTIO_GPU_CMD_RESOURCE_MAP_BLOB + * VIRTIO_GPU_CMD_RESOURCE_UNMAP_BLOB + */ + VIRTIO_GPU_SHM_ID_HOST_VISIBLE = 1 +}; + +#define VIRTIO_GPU_FLAG_FENCE (1 << 0) +/* + * If the following flag is set, then ring_idx contains the index + * of the command ring that needs to used when creating the fence + */ +#define VIRTIO_GPU_FLAG_INFO_RING_IDX (1 << 1) struct virtio_gpu_ctrl_hdr { __le32 type; __le32 flags; __le64 fence_id; __le32 ctx_id; - __le32 padding; + __u8 ring_idx; + __u8 padding[3]; }; /* data passed in the cursor vq */ @@ -250,10 +280,11 @@ struct virtio_gpu_resource_create_3d { }; /* VIRTIO_GPU_CMD_CTX_CREATE */ +#define VIRTIO_GPU_CONTEXT_INIT_CAPSET_ID_MASK 0x000000ff struct virtio_gpu_ctx_create { struct virtio_gpu_ctrl_hdr hdr; __le32 nlen; - __le32 padding; + __le32 context_init; char debug_name[64]; }; @@ -359,4 +390,67 @@ struct virtio_gpu_resp_resource_uuid { __u8 uuid[16]; }; +/* VIRTIO_GPU_CMD_RESOURCE_CREATE_BLOB */ +struct virtio_gpu_resource_create_blob { + struct virtio_gpu_ctrl_hdr hdr; + __le32 resource_id; +#define VIRTIO_GPU_BLOB_MEM_GUEST 0x0001 +#define VIRTIO_GPU_BLOB_MEM_HOST3D 0x0002 +#define VIRTIO_GPU_BLOB_MEM_HOST3D_GUEST 0x0003 + +#define VIRTIO_GPU_BLOB_FLAG_USE_MAPPABLE 0x0001 +#define VIRTIO_GPU_BLOB_FLAG_USE_SHAREABLE 0x0002 +#define VIRTIO_GPU_BLOB_FLAG_USE_CROSS_DEVICE 0x0004 + /* zero is invalid blob mem */ + __le32 blob_mem; + __le32 blob_flags; + __le32 nr_entries; + __le64 blob_id; + __le64 size; + /* + * sizeof(nr_entries * virtio_gpu_mem_entry) bytes follow + */ +}; + +/* VIRTIO_GPU_CMD_SET_SCANOUT_BLOB */ +struct virtio_gpu_set_scanout_blob { + struct virtio_gpu_ctrl_hdr hdr; + struct virtio_gpu_rect r; + __le32 scanout_id; + __le32 resource_id; + __le32 width; + __le32 height; + __le32 format; + __le32 padding; + __le32 strides[4]; + __le32 offsets[4]; +}; + +/* VIRTIO_GPU_CMD_RESOURCE_MAP_BLOB */ +struct virtio_gpu_resource_map_blob { + struct virtio_gpu_ctrl_hdr hdr; + __le32 resource_id; + __le32 padding; + __le64 offset; +}; + +/* VIRTIO_GPU_RESP_OK_MAP_INFO */ +#define VIRTIO_GPU_MAP_CACHE_MASK 0x0f +#define VIRTIO_GPU_MAP_CACHE_NONE 0x00 +#define VIRTIO_GPU_MAP_CACHE_CACHED 0x01 +#define VIRTIO_GPU_MAP_CACHE_UNCACHED 0x02 +#define VIRTIO_GPU_MAP_CACHE_WC 0x03 +struct virtio_gpu_resp_map_info { + struct virtio_gpu_ctrl_hdr hdr; + __u32 map_info; + __u32 padding; +}; + +/* VIRTIO_GPU_CMD_RESOURCE_UNMAP_BLOB */ +struct virtio_gpu_resource_unmap_blob { + struct virtio_gpu_ctrl_hdr hdr; + __le32 resource_id; + __le32 padding; +}; + #endif diff --git a/linux-headers/include/linux/virtio_i2c.h b/linux-headers/include/linux/virtio_i2c.h new file mode 100644 index 00000000000..8fb3750bfdb --- /dev/null +++ b/linux-headers/include/linux/virtio_i2c.h @@ -0,0 +1,47 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later WITH Linux-syscall-note */ +/* + * Definitions for virtio I2C Adpter + * + * Copyright (c) 2021 Intel Corporation. All rights reserved. + */ + +#ifndef _LINUX_VIRTIO_I2C_H +#define _LINUX_VIRTIO_I2C_H + +#include +#include + +/* Virtio I2C Feature bits */ +#define VIRTIO_I2C_F_ZERO_LENGTH_REQUEST 0 + +/* The bit 0 of the @virtio_i2c_out_hdr.@flags, used to group the requests */ +#define VIRTIO_I2C_FLAGS_FAIL_NEXT _BITUL(0) + +/* The bit 1 of the @virtio_i2c_out_hdr.@flags, used to mark a buffer as read */ +#define VIRTIO_I2C_FLAGS_M_RD _BITUL(1) + +/** + * struct virtio_i2c_out_hdr - the virtio I2C message OUT header + * @addr: the controlled device address + * @padding: used to pad to full dword + * @flags: used for feature extensibility + */ +struct virtio_i2c_out_hdr { + __le16 addr; + __le16 padding; + __le32 flags; +}; + +/** + * struct virtio_i2c_in_hdr - the virtio I2C message IN header + * @status: the processing result from the backend + */ +struct virtio_i2c_in_hdr { + __u8 status; +}; + +/* The final status written by the device */ +#define VIRTIO_I2C_MSG_OK 0 +#define VIRTIO_I2C_MSG_ERR 1 + +#endif /* _LINUX_VIRTIO_I2C_H */ diff --git a/linux-headers/include/linux/virtio_ids.h b/linux-headers/include/linux/virtio_ids.h index b052355ac7a..7aa2eb76620 100644 --- a/linux-headers/include/linux/virtio_ids.h +++ b/linux-headers/include/linux/virtio_ids.h @@ -29,24 +29,56 @@ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ -#define VIRTIO_ID_NET 1 /* virtio net */ -#define VIRTIO_ID_BLOCK 2 /* virtio block */ -#define VIRTIO_ID_CONSOLE 3 /* virtio console */ -#define VIRTIO_ID_RNG 4 /* virtio rng */ -#define VIRTIO_ID_BALLOON 5 /* virtio balloon */ -#define VIRTIO_ID_RPMSG 7 /* virtio remote processor messaging */ -#define VIRTIO_ID_SCSI 8 /* virtio scsi */ -#define VIRTIO_ID_9P 9 /* 9p virtio console */ -#define VIRTIO_ID_RPROC_SERIAL 11 /* virtio remoteproc serial link */ -#define VIRTIO_ID_CAIF 12 /* Virtio caif */ -#define VIRTIO_ID_GPU 16 /* virtio GPU */ -#define VIRTIO_ID_INPUT 18 /* virtio input */ -#define VIRTIO_ID_VSOCK 19 /* virtio vsock transport */ -#define VIRTIO_ID_CRYPTO 20 /* virtio crypto */ -#define VIRTIO_ID_IOMMU 23 /* virtio IOMMU */ -#define VIRTIO_ID_MEM 24 /* virtio mem */ -#define VIRTIO_ID_FS 26 /* virtio filesystem */ -#define VIRTIO_ID_PMEM 27 /* virtio pmem */ -#define VIRTIO_ID_MAC80211_HWSIM 29 /* virtio mac80211-hwsim */ +#define VIRTIO_ID_NET 1 /* virtio net */ +#define VIRTIO_ID_BLOCK 2 /* virtio block */ +#define VIRTIO_ID_CONSOLE 3 /* virtio console */ +#define VIRTIO_ID_RNG 4 /* virtio rng */ +#define VIRTIO_ID_BALLOON 5 /* virtio balloon */ +#define VIRTIO_ID_IOMEM 6 /* virtio ioMemory */ +#define VIRTIO_ID_RPMSG 7 /* virtio remote processor messaging */ +#define VIRTIO_ID_SCSI 8 /* virtio scsi */ +#define VIRTIO_ID_9P 9 /* 9p virtio console */ +#define VIRTIO_ID_MAC80211_WLAN 10 /* virtio WLAN MAC */ +#define VIRTIO_ID_RPROC_SERIAL 11 /* virtio remoteproc serial link */ +#define VIRTIO_ID_CAIF 12 /* Virtio caif */ +#define VIRTIO_ID_MEMORY_BALLOON 13 /* virtio memory balloon */ +#define VIRTIO_ID_GPU 16 /* virtio GPU */ +#define VIRTIO_ID_CLOCK 17 /* virtio clock/timer */ +#define VIRTIO_ID_INPUT 18 /* virtio input */ +#define VIRTIO_ID_VSOCK 19 /* virtio vsock transport */ +#define VIRTIO_ID_CRYPTO 20 /* virtio crypto */ +#define VIRTIO_ID_SIGNAL_DIST 21 /* virtio signal distribution device */ +#define VIRTIO_ID_PSTORE 22 /* virtio pstore device */ +#define VIRTIO_ID_IOMMU 23 /* virtio IOMMU */ +#define VIRTIO_ID_MEM 24 /* virtio mem */ +#define VIRTIO_ID_SOUND 25 /* virtio sound */ +#define VIRTIO_ID_FS 26 /* virtio filesystem */ +#define VIRTIO_ID_PMEM 27 /* virtio pmem */ +#define VIRTIO_ID_RPMB 28 /* virtio rpmb */ +#define VIRTIO_ID_MAC80211_HWSIM 29 /* virtio mac80211-hwsim */ +#define VIRTIO_ID_VIDEO_ENCODER 30 /* virtio video encoder */ +#define VIRTIO_ID_VIDEO_DECODER 31 /* virtio video decoder */ +#define VIRTIO_ID_SCMI 32 /* virtio SCMI */ +#define VIRTIO_ID_NITRO_SEC_MOD 33 /* virtio nitro secure module*/ +#define VIRTIO_ID_I2C_ADAPTER 34 /* virtio i2c adapter */ +#define VIRTIO_ID_WATCHDOG 35 /* virtio watchdog */ +#define VIRTIO_ID_CAN 36 /* virtio can */ +#define VIRTIO_ID_DMABUF 37 /* virtio dmabuf */ +#define VIRTIO_ID_PARAM_SERV 38 /* virtio parameter server */ +#define VIRTIO_ID_AUDIO_POLICY 39 /* virtio audio policy */ +#define VIRTIO_ID_BT 40 /* virtio bluetooth */ +#define VIRTIO_ID_GPIO 41 /* virtio gpio */ + +/* + * Virtio Transitional IDs + */ + +#define VIRTIO_TRANS_ID_NET 0x1000 /* transitional virtio net */ +#define VIRTIO_TRANS_ID_BLOCK 0x1001 /* transitional virtio block */ +#define VIRTIO_TRANS_ID_BALLOON 0x1002 /* transitional virtio balloon */ +#define VIRTIO_TRANS_ID_CONSOLE 0x1003 /* transitional virtio console */ +#define VIRTIO_TRANS_ID_SCSI 0x1004 /* transitional virtio SCSI */ +#define VIRTIO_TRANS_ID_RNG 0x1005 /* transitional virtio rng */ +#define VIRTIO_TRANS_ID_9P 0x1009 /* transitional virtio 9p console */ #endif /* _LINUX_VIRTIO_IDS_H */ diff --git a/linux-headers/include/linux/virtio_iommu.h b/linux-headers/include/linux/virtio_iommu.h index 7ce7a53302d..bfb416a3324 100644 --- a/linux-headers/include/linux/virtio_iommu.h +++ b/linux-headers/include/linux/virtio_iommu.h @@ -16,6 +16,7 @@ #define VIRTIO_IOMMU_F_BYPASS 3 #define VIRTIO_IOMMU_F_PROBE 4 #define VIRTIO_IOMMU_F_MMIO 5 +#define VIRTIO_IOMMU_F_BYPASS_CONFIG 6 struct virtio_iommu_range_64 { __le64 start; @@ -36,6 +37,8 @@ struct virtio_iommu_config { struct virtio_iommu_range_32 domain_range; /* Probe buffer size */ __le32 probe_size; + __u8 bypass; + __u8 reserved[3]; }; /* Request types */ @@ -66,11 +69,14 @@ struct virtio_iommu_req_tail { __u8 reserved[3]; }; +#define VIRTIO_IOMMU_ATTACH_F_BYPASS (1 << 0) + struct virtio_iommu_req_attach { struct virtio_iommu_req_head head; __le32 domain; __le32 endpoint; - __u8 reserved[8]; + __le32 flags; + __u8 reserved[4]; struct virtio_iommu_req_tail tail; }; diff --git a/linux-headers/include/linux/virtio_mem.h b/linux-headers/include/linux/virtio_mem.h index 70e01c687d5..e9122f1d0e0 100644 --- a/linux-headers/include/linux/virtio_mem.h +++ b/linux-headers/include/linux/virtio_mem.h @@ -68,9 +68,10 @@ * explicitly triggered (VIRTIO_MEM_REQ_UNPLUG). * * There are no guarantees what will happen if unplugged memory is - * read/written. Such memory should, in general, not be touched. E.g., - * even writing might succeed, but the values will simply be discarded at - * random points in time. + * read/written. In general, unplugged memory should not be touched, because + * the resulting action is undefined. There is one exception: without + * VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE, unplugged memory inside the usable + * region can be read, to simplify creation of memory dumps. * * It can happen that the device cannot process a request, because it is * busy. The device driver has to retry later. @@ -87,6 +88,8 @@ /* node_id is an ACPI PXM and is valid */ #define VIRTIO_MEM_F_ACPI_PXM 0 +/* unplugged memory must not be accessed */ +#define VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE 1 /* --- virtio-mem: guest -> host requests --- */ diff --git a/linux-headers/include/linux/virtio_net.h b/linux-headers/include/linux/virtio_net.h index ab08237ff2b..5775077dc6e 100644 --- a/linux-headers/include/linux/virtio_net.h +++ b/linux-headers/include/linux/virtio_net.h @@ -56,8 +56,13 @@ #define VIRTIO_NET_F_MQ 22 /* Device supports Receive Flow * Steering */ #define VIRTIO_NET_F_CTRL_MAC_ADDR 23 /* Set MAC address */ - +#define VIRTIO_NET_F_VQ_NOTF_COAL 52 /* Device supports virtqueue notification coalescing */ +#define VIRTIO_NET_F_NOTF_COAL 53 /* Device supports notifications coalescing */ +#define VIRTIO_NET_F_GUEST_USO4 54 /* Guest can handle USOv4 in. */ +#define VIRTIO_NET_F_GUEST_USO6 55 /* Guest can handle USOv6 in. */ +#define VIRTIO_NET_F_HOST_USO 56 /* Host can handle USO in. */ #define VIRTIO_NET_F_HASH_REPORT 57 /* Supports hash report */ +#define VIRTIO_NET_F_GUEST_HDRLEN 59 /* Guest provides the exact hdr_len value. */ #define VIRTIO_NET_F_RSS 60 /* Supports RSS RX steering */ #define VIRTIO_NET_F_RSC_EXT 61 /* extended coalescing info */ #define VIRTIO_NET_F_STANDBY 62 /* Act as standby for another device @@ -130,6 +135,7 @@ struct virtio_net_hdr_v1 { #define VIRTIO_NET_HDR_GSO_TCPV4 1 /* GSO frame, IPv4 TCP (TSO) */ #define VIRTIO_NET_HDR_GSO_UDP 3 /* GSO frame, IPv4 UDP (UFO) */ #define VIRTIO_NET_HDR_GSO_TCPV6 4 /* GSO frame, IPv6 TCP */ +#define VIRTIO_NET_HDR_GSO_UDP_L4 5 /* GSO frame, IPv4& IPv6 UDP (USO) */ #define VIRTIO_NET_HDR_GSO_ECN 0x80 /* TCP has ECN set */ __u8 gso_type; __virtio16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */ @@ -355,4 +361,49 @@ struct virtio_net_hash_config { #define VIRTIO_NET_CTRL_GUEST_OFFLOADS 5 #define VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET 0 +/* + * Control notifications coalescing. + * + * Request the device to change the notifications coalescing parameters. + * + * Available with the VIRTIO_NET_F_NOTF_COAL feature bit. + */ +#define VIRTIO_NET_CTRL_NOTF_COAL 6 +/* + * Set the tx-usecs/tx-max-packets parameters. + */ +struct virtio_net_ctrl_coal_tx { + /* Maximum number of packets to send before a TX notification */ + __le32 tx_max_packets; + /* Maximum number of usecs to delay a TX notification */ + __le32 tx_usecs; +}; + +#define VIRTIO_NET_CTRL_NOTF_COAL_TX_SET 0 + +/* + * Set the rx-usecs/rx-max-packets parameters. + */ +struct virtio_net_ctrl_coal_rx { + /* Maximum number of packets to receive before a RX notification */ + __le32 rx_max_packets; + /* Maximum number of usecs to delay a RX notification */ + __le32 rx_usecs; +}; + +#define VIRTIO_NET_CTRL_NOTF_COAL_RX_SET 1 +#define VIRTIO_NET_CTRL_NOTF_COAL_VQ_SET 2 +#define VIRTIO_NET_CTRL_NOTF_COAL_VQ_GET 3 + +struct virtio_net_ctrl_coal { + __le32 max_packets; + __le32 max_usecs; +}; + +struct virtio_net_ctrl_coal_vq { + __le16 vqn; + __le16 reserved; + struct virtio_net_ctrl_coal coal; +}; + #endif /* _LINUX_VIRTIO_NET_H */ diff --git a/linux-headers/include/linux/virtio_pci.h b/linux-headers/include/linux/virtio_pci.h index 3a86f36d7e3..f703afc7ad3 100644 --- a/linux-headers/include/linux/virtio_pci.h +++ b/linux-headers/include/linux/virtio_pci.h @@ -202,6 +202,8 @@ struct virtio_pci_cfg_cap { #define VIRTIO_PCI_COMMON_Q_AVAILHI 44 #define VIRTIO_PCI_COMMON_Q_USEDLO 48 #define VIRTIO_PCI_COMMON_Q_USEDHI 52 +#define VIRTIO_PCI_COMMON_Q_NDATA 56 +#define VIRTIO_PCI_COMMON_Q_RESET 58 #endif /* VIRTIO_PCI_NO_MODERN */ diff --git a/linux-headers/include/linux/virtio_pcidev.h b/linux-headers/include/linux/virtio_pcidev.h new file mode 100644 index 00000000000..6e01dad58f8 --- /dev/null +++ b/linux-headers/include/linux/virtio_pcidev.h @@ -0,0 +1,65 @@ +/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */ +/* + * Copyright (C) 2021 Intel Corporation + * Author: Johannes Berg + */ +#ifndef _LINUX_VIRTIO_PCIDEV_H +#define _LINUX_VIRTIO_PCIDEV_H +#include + +/** + * enum virtio_pcidev_ops - virtual PCI device operations + * @VIRTIO_PCIDEV_OP_RESERVED: reserved to catch errors + * @VIRTIO_PCIDEV_OP_CFG_READ: read config space, size is 1, 2, 4 or 8; + * the @data field should be filled in by the device (in little endian). + * @VIRTIO_PCIDEV_OP_CFG_WRITE: write config space, size is 1, 2, 4 or 8; + * the @data field contains the data to write (in little endian). + * @VIRTIO_PCIDEV_OP_MMIO_READ: read BAR mem/pio, size can be variable; + * the @data field should be filled in by the device (in little endian). + * @VIRTIO_PCIDEV_OP_MMIO_WRITE: write BAR mem/pio, size can be variable; + * the @data field contains the data to write (in little endian). + * @VIRTIO_PCIDEV_OP_MMIO_MEMSET: memset MMIO, size is variable but + * the @data field only has one byte (unlike @VIRTIO_PCIDEV_OP_MMIO_WRITE) + * @VIRTIO_PCIDEV_OP_INT: legacy INTx# pin interrupt, the addr field is 1-4 for + * the number + * @VIRTIO_PCIDEV_OP_MSI: MSI(-X) interrupt, this message basically transports + * the 16- or 32-bit write that would otherwise be done into memory, + * analogous to the write messages (@VIRTIO_PCIDEV_OP_MMIO_WRITE) above + * @VIRTIO_PCIDEV_OP_PME: Dummy message whose content is ignored (and should be + * all zeroes) to signal the PME# pin. + */ +enum virtio_pcidev_ops { + VIRTIO_PCIDEV_OP_RESERVED = 0, + VIRTIO_PCIDEV_OP_CFG_READ, + VIRTIO_PCIDEV_OP_CFG_WRITE, + VIRTIO_PCIDEV_OP_MMIO_READ, + VIRTIO_PCIDEV_OP_MMIO_WRITE, + VIRTIO_PCIDEV_OP_MMIO_MEMSET, + VIRTIO_PCIDEV_OP_INT, + VIRTIO_PCIDEV_OP_MSI, + VIRTIO_PCIDEV_OP_PME, +}; + +/** + * struct virtio_pcidev_msg - virtio PCI device operation + * @op: the operation to do + * @bar: the bar (only with BAR read/write messages) + * @reserved: reserved + * @size: the size of the read/write (in bytes) + * @addr: the address to read/write + * @data: the data, normally @size long, but just one byte for + * %VIRTIO_PCIDEV_OP_MMIO_MEMSET + * + * Note: the fields are all in native (CPU) endian, however, the + * @data values will often be in little endian (see the ops above.) + */ +struct virtio_pcidev_msg { + __u8 op; + __u8 bar; + __u16 reserved; + __u32 size; + __u64 addr; + __u8 data[]; +}; + +#endif /* _LINUX_VIRTIO_PCIDEV_H */ diff --git a/linux-headers/include/linux/virtio_ring.h b/linux-headers/include/linux/virtio_ring.h index 010483437e5..0e827fb50c6 100644 --- a/linux-headers/include/linux/virtio_ring.h +++ b/linux-headers/include/linux/virtio_ring.h @@ -91,15 +91,21 @@ #define VRING_USED_ALIGN_SIZE 4 #define VRING_DESC_ALIGN_SIZE 16 -/* Virtio ring descriptors: 16 bytes. These can chain together via "next". */ +/** + * struct vring_desc - Virtio ring descriptors, + * 16 bytes long. These can chain together via @next. + * + * @addr: buffer address (guest-physical) + * @len: buffer length + * @flags: descriptor flags + * @next: index of the next descriptor in the chain, + * if the VRING_DESC_F_NEXT flag is set. We chain unused + * descriptors via this, too. + */ struct vring_desc { - /* Address (guest-physical). */ __virtio64 addr; - /* Length. */ __virtio32 len; - /* The flags as indicated above. */ __virtio16 flags; - /* We chain unused descriptors via this, too */ __virtio16 next; }; diff --git a/linux-headers/include/linux/virtio_scmi.h b/linux-headers/include/linux/virtio_scmi.h new file mode 100644 index 00000000000..b187e62df52 --- /dev/null +++ b/linux-headers/include/linux/virtio_scmi.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */ +/* + * Copyright (C) 2020-2021 OpenSynergy GmbH + * Copyright (C) 2021 ARM Ltd. + */ + +#ifndef _LINUX_VIRTIO_SCMI_H +#define _LINUX_VIRTIO_SCMI_H + +#include + +/* Device implements some SCMI notifications, or delayed responses. */ +#define VIRTIO_SCMI_F_P2A_CHANNELS 0 + +/* Device implements any SCMI statistics shared memory region */ +#define VIRTIO_SCMI_F_SHARED_MEMORY 1 + +/* Virtqueues */ + +#define VIRTIO_SCMI_VQ_TX 0 /* cmdq */ +#define VIRTIO_SCMI_VQ_RX 1 /* eventq */ +#define VIRTIO_SCMI_VQ_MAX_CNT 2 + +#endif /* _LINUX_VIRTIO_SCMI_H */ diff --git a/linux-headers/include/linux/virtio_snd.h b/linux-headers/include/linux/virtio_snd.h new file mode 100644 index 00000000000..dfe49547a7b --- /dev/null +++ b/linux-headers/include/linux/virtio_snd.h @@ -0,0 +1,334 @@ +/* SPDX-License-Identifier: BSD-3-Clause */ +/* + * Copyright (C) 2021 OpenSynergy GmbH + */ +#ifndef VIRTIO_SND_IF_H +#define VIRTIO_SND_IF_H + +#include + +/******************************************************************************* + * CONFIGURATION SPACE + */ +struct virtio_snd_config { + /* # of available physical jacks */ + __le32 jacks; + /* # of available PCM streams */ + __le32 streams; + /* # of available channel maps */ + __le32 chmaps; +}; + +enum { + /* device virtqueue indexes */ + VIRTIO_SND_VQ_CONTROL = 0, + VIRTIO_SND_VQ_EVENT, + VIRTIO_SND_VQ_TX, + VIRTIO_SND_VQ_RX, + /* # of device virtqueues */ + VIRTIO_SND_VQ_MAX +}; + +/******************************************************************************* + * COMMON DEFINITIONS + */ + +/* supported dataflow directions */ +enum { + VIRTIO_SND_D_OUTPUT = 0, + VIRTIO_SND_D_INPUT +}; + +enum { + /* jack control request types */ + VIRTIO_SND_R_JACK_INFO = 1, + VIRTIO_SND_R_JACK_REMAP, + + /* PCM control request types */ + VIRTIO_SND_R_PCM_INFO = 0x0100, + VIRTIO_SND_R_PCM_SET_PARAMS, + VIRTIO_SND_R_PCM_PREPARE, + VIRTIO_SND_R_PCM_RELEASE, + VIRTIO_SND_R_PCM_START, + VIRTIO_SND_R_PCM_STOP, + + /* channel map control request types */ + VIRTIO_SND_R_CHMAP_INFO = 0x0200, + + /* jack event types */ + VIRTIO_SND_EVT_JACK_CONNECTED = 0x1000, + VIRTIO_SND_EVT_JACK_DISCONNECTED, + + /* PCM event types */ + VIRTIO_SND_EVT_PCM_PERIOD_ELAPSED = 0x1100, + VIRTIO_SND_EVT_PCM_XRUN, + + /* common status codes */ + VIRTIO_SND_S_OK = 0x8000, + VIRTIO_SND_S_BAD_MSG, + VIRTIO_SND_S_NOT_SUPP, + VIRTIO_SND_S_IO_ERR +}; + +/* common header */ +struct virtio_snd_hdr { + __le32 code; +}; + +/* event notification */ +struct virtio_snd_event { + /* VIRTIO_SND_EVT_XXX */ + struct virtio_snd_hdr hdr; + /* optional event data */ + __le32 data; +}; + +/* common control request to query an item information */ +struct virtio_snd_query_info { + /* VIRTIO_SND_R_XXX_INFO */ + struct virtio_snd_hdr hdr; + /* item start identifier */ + __le32 start_id; + /* item count to query */ + __le32 count; + /* item information size in bytes */ + __le32 size; +}; + +/* common item information header */ +struct virtio_snd_info { + /* function group node id (High Definition Audio Specification 7.1.2) */ + __le32 hda_fn_nid; +}; + +/******************************************************************************* + * JACK CONTROL MESSAGES + */ +struct virtio_snd_jack_hdr { + /* VIRTIO_SND_R_JACK_XXX */ + struct virtio_snd_hdr hdr; + /* 0 ... virtio_snd_config::jacks - 1 */ + __le32 jack_id; +}; + +/* supported jack features */ +enum { + VIRTIO_SND_JACK_F_REMAP = 0 +}; + +struct virtio_snd_jack_info { + /* common header */ + struct virtio_snd_info hdr; + /* supported feature bit map (1 << VIRTIO_SND_JACK_F_XXX) */ + __le32 features; + /* pin configuration (High Definition Audio Specification 7.3.3.31) */ + __le32 hda_reg_defconf; + /* pin capabilities (High Definition Audio Specification 7.3.4.9) */ + __le32 hda_reg_caps; + /* current jack connection status (0: disconnected, 1: connected) */ + __u8 connected; + + __u8 padding[7]; +}; + +/* jack remapping control request */ +struct virtio_snd_jack_remap { + /* .code = VIRTIO_SND_R_JACK_REMAP */ + struct virtio_snd_jack_hdr hdr; + /* selected association number */ + __le32 association; + /* selected sequence number */ + __le32 sequence; +}; + +/******************************************************************************* + * PCM CONTROL MESSAGES + */ +struct virtio_snd_pcm_hdr { + /* VIRTIO_SND_R_PCM_XXX */ + struct virtio_snd_hdr hdr; + /* 0 ... virtio_snd_config::streams - 1 */ + __le32 stream_id; +}; + +/* supported PCM stream features */ +enum { + VIRTIO_SND_PCM_F_SHMEM_HOST = 0, + VIRTIO_SND_PCM_F_SHMEM_GUEST, + VIRTIO_SND_PCM_F_MSG_POLLING, + VIRTIO_SND_PCM_F_EVT_SHMEM_PERIODS, + VIRTIO_SND_PCM_F_EVT_XRUNS +}; + +/* supported PCM sample formats */ +enum { + /* analog formats (width / physical width) */ + VIRTIO_SND_PCM_FMT_IMA_ADPCM = 0, /* 4 / 4 bits */ + VIRTIO_SND_PCM_FMT_MU_LAW, /* 8 / 8 bits */ + VIRTIO_SND_PCM_FMT_A_LAW, /* 8 / 8 bits */ + VIRTIO_SND_PCM_FMT_S8, /* 8 / 8 bits */ + VIRTIO_SND_PCM_FMT_U8, /* 8 / 8 bits */ + VIRTIO_SND_PCM_FMT_S16, /* 16 / 16 bits */ + VIRTIO_SND_PCM_FMT_U16, /* 16 / 16 bits */ + VIRTIO_SND_PCM_FMT_S18_3, /* 18 / 24 bits */ + VIRTIO_SND_PCM_FMT_U18_3, /* 18 / 24 bits */ + VIRTIO_SND_PCM_FMT_S20_3, /* 20 / 24 bits */ + VIRTIO_SND_PCM_FMT_U20_3, /* 20 / 24 bits */ + VIRTIO_SND_PCM_FMT_S24_3, /* 24 / 24 bits */ + VIRTIO_SND_PCM_FMT_U24_3, /* 24 / 24 bits */ + VIRTIO_SND_PCM_FMT_S20, /* 20 / 32 bits */ + VIRTIO_SND_PCM_FMT_U20, /* 20 / 32 bits */ + VIRTIO_SND_PCM_FMT_S24, /* 24 / 32 bits */ + VIRTIO_SND_PCM_FMT_U24, /* 24 / 32 bits */ + VIRTIO_SND_PCM_FMT_S32, /* 32 / 32 bits */ + VIRTIO_SND_PCM_FMT_U32, /* 32 / 32 bits */ + VIRTIO_SND_PCM_FMT_FLOAT, /* 32 / 32 bits */ + VIRTIO_SND_PCM_FMT_FLOAT64, /* 64 / 64 bits */ + /* digital formats (width / physical width) */ + VIRTIO_SND_PCM_FMT_DSD_U8, /* 8 / 8 bits */ + VIRTIO_SND_PCM_FMT_DSD_U16, /* 16 / 16 bits */ + VIRTIO_SND_PCM_FMT_DSD_U32, /* 32 / 32 bits */ + VIRTIO_SND_PCM_FMT_IEC958_SUBFRAME /* 32 / 32 bits */ +}; + +/* supported PCM frame rates */ +enum { + VIRTIO_SND_PCM_RATE_5512 = 0, + VIRTIO_SND_PCM_RATE_8000, + VIRTIO_SND_PCM_RATE_11025, + VIRTIO_SND_PCM_RATE_16000, + VIRTIO_SND_PCM_RATE_22050, + VIRTIO_SND_PCM_RATE_32000, + VIRTIO_SND_PCM_RATE_44100, + VIRTIO_SND_PCM_RATE_48000, + VIRTIO_SND_PCM_RATE_64000, + VIRTIO_SND_PCM_RATE_88200, + VIRTIO_SND_PCM_RATE_96000, + VIRTIO_SND_PCM_RATE_176400, + VIRTIO_SND_PCM_RATE_192000, + VIRTIO_SND_PCM_RATE_384000 +}; + +struct virtio_snd_pcm_info { + /* common header */ + struct virtio_snd_info hdr; + /* supported feature bit map (1 << VIRTIO_SND_PCM_F_XXX) */ + __le32 features; + /* supported sample format bit map (1 << VIRTIO_SND_PCM_FMT_XXX) */ + __le64 formats; + /* supported frame rate bit map (1 << VIRTIO_SND_PCM_RATE_XXX) */ + __le64 rates; + /* dataflow direction (VIRTIO_SND_D_XXX) */ + __u8 direction; + /* minimum # of supported channels */ + __u8 channels_min; + /* maximum # of supported channels */ + __u8 channels_max; + + __u8 padding[5]; +}; + +/* set PCM stream format */ +struct virtio_snd_pcm_set_params { + /* .code = VIRTIO_SND_R_PCM_SET_PARAMS */ + struct virtio_snd_pcm_hdr hdr; + /* size of the hardware buffer */ + __le32 buffer_bytes; + /* size of the hardware period */ + __le32 period_bytes; + /* selected feature bit map (1 << VIRTIO_SND_PCM_F_XXX) */ + __le32 features; + /* selected # of channels */ + __u8 channels; + /* selected sample format (VIRTIO_SND_PCM_FMT_XXX) */ + __u8 format; + /* selected frame rate (VIRTIO_SND_PCM_RATE_XXX) */ + __u8 rate; + + __u8 padding; +}; + +/******************************************************************************* + * PCM I/O MESSAGES + */ + +/* I/O request header */ +struct virtio_snd_pcm_xfer { + /* 0 ... virtio_snd_config::streams - 1 */ + __le32 stream_id; +}; + +/* I/O request status */ +struct virtio_snd_pcm_status { + /* VIRTIO_SND_S_XXX */ + __le32 status; + /* current device latency */ + __le32 latency_bytes; +}; + +/******************************************************************************* + * CHANNEL MAP CONTROL MESSAGES + */ +struct virtio_snd_chmap_hdr { + /* VIRTIO_SND_R_CHMAP_XXX */ + struct virtio_snd_hdr hdr; + /* 0 ... virtio_snd_config::chmaps - 1 */ + __le32 chmap_id; +}; + +/* standard channel position definition */ +enum { + VIRTIO_SND_CHMAP_NONE = 0, /* undefined */ + VIRTIO_SND_CHMAP_NA, /* silent */ + VIRTIO_SND_CHMAP_MONO, /* mono stream */ + VIRTIO_SND_CHMAP_FL, /* front left */ + VIRTIO_SND_CHMAP_FR, /* front right */ + VIRTIO_SND_CHMAP_RL, /* rear left */ + VIRTIO_SND_CHMAP_RR, /* rear right */ + VIRTIO_SND_CHMAP_FC, /* front center */ + VIRTIO_SND_CHMAP_LFE, /* low frequency (LFE) */ + VIRTIO_SND_CHMAP_SL, /* side left */ + VIRTIO_SND_CHMAP_SR, /* side right */ + VIRTIO_SND_CHMAP_RC, /* rear center */ + VIRTIO_SND_CHMAP_FLC, /* front left center */ + VIRTIO_SND_CHMAP_FRC, /* front right center */ + VIRTIO_SND_CHMAP_RLC, /* rear left center */ + VIRTIO_SND_CHMAP_RRC, /* rear right center */ + VIRTIO_SND_CHMAP_FLW, /* front left wide */ + VIRTIO_SND_CHMAP_FRW, /* front right wide */ + VIRTIO_SND_CHMAP_FLH, /* front left high */ + VIRTIO_SND_CHMAP_FCH, /* front center high */ + VIRTIO_SND_CHMAP_FRH, /* front right high */ + VIRTIO_SND_CHMAP_TC, /* top center */ + VIRTIO_SND_CHMAP_TFL, /* top front left */ + VIRTIO_SND_CHMAP_TFR, /* top front right */ + VIRTIO_SND_CHMAP_TFC, /* top front center */ + VIRTIO_SND_CHMAP_TRL, /* top rear left */ + VIRTIO_SND_CHMAP_TRR, /* top rear right */ + VIRTIO_SND_CHMAP_TRC, /* top rear center */ + VIRTIO_SND_CHMAP_TFLC, /* top front left center */ + VIRTIO_SND_CHMAP_TFRC, /* top front right center */ + VIRTIO_SND_CHMAP_TSL, /* top side left */ + VIRTIO_SND_CHMAP_TSR, /* top side right */ + VIRTIO_SND_CHMAP_LLFE, /* left LFE */ + VIRTIO_SND_CHMAP_RLFE, /* right LFE */ + VIRTIO_SND_CHMAP_BC, /* bottom center */ + VIRTIO_SND_CHMAP_BLC, /* bottom left center */ + VIRTIO_SND_CHMAP_BRC /* bottom right center */ +}; + +/* maximum possible number of channels */ +#define VIRTIO_SND_CHMAP_MAX_SIZE 18 + +struct virtio_snd_chmap_info { + /* common header */ + struct virtio_snd_info hdr; + /* dataflow direction (VIRTIO_SND_D_XXX) */ + __u8 direction; + /* # of valid channel position values */ + __u8 channels; + /* channel position values (VIRTIO_SND_CHMAP_XXX) */ + __u8 positions[VIRTIO_SND_CHMAP_MAX_SIZE]; +}; + +#endif /* VIRTIO_SND_IF_H */ diff --git a/linux-headers/include/linux/virtio_vsock.h b/linux-headers/include/linux/virtio_vsock.h index 20b453e59fe..b72c9157e0f 100644 --- a/linux-headers/include/linux/virtio_vsock.h +++ b/linux-headers/include/linux/virtio_vsock.h @@ -38,6 +38,9 @@ #include #include +/* The feature bitmap for virtio vsock */ +#define VIRTIO_VSOCK_F_SEQPACKET 1 /* SOCK_SEQPACKET supported */ + struct virtio_vsock_config { __le64 guest_cid; } __attribute__((packed)); @@ -65,6 +68,7 @@ struct virtio_vsock_hdr { enum virtio_vsock_type { VIRTIO_VSOCK_TYPE_STREAM = 1, + VIRTIO_VSOCK_TYPE_SEQPACKET = 2, }; enum virtio_vsock_op { @@ -91,4 +95,10 @@ enum virtio_vsock_shutdown { VIRTIO_VSOCK_SHUTDOWN_SEND = 2, }; +/* VIRTIO_VSOCK_OP_RW flags values */ +enum virtio_vsock_rw { + VIRTIO_VSOCK_SEQ_EOM = 1, + VIRTIO_VSOCK_SEQ_EOR = 2, +}; + #endif /* _LINUX_VIRTIO_VSOCK_H */ diff --git a/linux-headers/include/linux/vm_sockets.h b/linux-headers/include/linux/vm_sockets.h index 196b6de8ba9..3692d4391e8 100644 --- a/linux-headers/include/linux/vm_sockets.h +++ b/linux-headers/include/linux/vm_sockets.h @@ -18,6 +18,7 @@ #define _VM_SOCKETS_H #include +#include /* Option name for STREAM socket buffer size. Use as the option name in * setsockopt(3) or getsockopt(3) to set or get an unsigned long long that @@ -63,7 +64,7 @@ * timeout for a STREAM socket. */ -#define SO_VM_SOCKETS_CONNECT_TIMEOUT 6 +#define SO_VM_SOCKETS_CONNECT_TIMEOUT_OLD 6 /* Option name for using non-blocking send/receive. Use as the option name * for setsockopt(3) or getsockopt(3) to set or get the non-blocking @@ -80,6 +81,15 @@ #define SO_VM_SOCKETS_NONBLOCK_TXRX 7 +#define SO_VM_SOCKETS_CONNECT_TIMEOUT_NEW 8 + +#if __BITS_PER_LONG == 64 || (defined(__x86_64__) && defined(__ILP32__)) +#define SO_VM_SOCKETS_CONNECT_TIMEOUT SO_VM_SOCKETS_CONNECT_TIMEOUT_OLD +#else +#define SO_VM_SOCKETS_CONNECT_TIMEOUT \ + (sizeof(time_t) == sizeof(__kernel_long_t) ? SO_VM_SOCKETS_CONNECT_TIMEOUT_OLD : SO_VM_SOCKETS_CONNECT_TIMEOUT_NEW) +#endif + /* The vSocket equivalent of INADDR_ANY. This works for the svm_cid field of * sockaddr_vm and indicates the context ID of the current endpoint. */ @@ -114,6 +124,26 @@ #define VMADDR_CID_HOST 2 +/* The current default use case for the vsock channel is the following: + * local vsock communication between guest and host and nested VMs setup. + * In addition to this, implicitly, the vsock packets are forwarded to the host + * if no host->guest vsock transport is set. + * + * Set this flag value in the sockaddr_vm corresponding field if the vsock + * packets need to be always forwarded to the host. Using this behavior, + * vsock communication between sibling VMs can be setup. + * + * This way can explicitly distinguish between vsock channels created for + * different use cases, such as nested VMs (or local communication between + * guest and host) and sibling VMs. + * + * The flag can be set in the connect logic in the user space application flow. + * In the listen logic (from kernel space) the flag is set on the remote peer + * address. This happens for an incoming connection when it is routed from the + * host and comes from the guest (local CID and remote CID > VMADDR_CID_HOST). + */ +#define VMADDR_FLAG_TO_HOST 0x01 + /* Invalid vSockets version. */ #define VM_SOCKETS_INVALID_VERSION -1U @@ -148,10 +178,13 @@ struct sockaddr_vm { unsigned short svm_reserved1; unsigned int svm_port; unsigned int svm_cid; + __u8 svm_flags; unsigned char svm_zero[sizeof(struct sockaddr) - sizeof(sa_family_t) - sizeof(unsigned short) - - sizeof(unsigned int) - sizeof(unsigned int)]; + sizeof(unsigned int) - + sizeof(unsigned int) - + sizeof(__u8)]; }; #define IOCTL_VM_SOCKETS_GET_LOCAL_CID _IO(7, 0xb9) diff --git a/linux-headers/include/linux/wimax.h b/linux-headers/include/linux/wimax.h deleted file mode 100644 index 9f6b77af2f6..00000000000 --- a/linux-headers/include/linux/wimax.h +++ /dev/null @@ -1,239 +0,0 @@ -/* - * Linux WiMax - * API for user space - * - * - * Copyright (C) 2007-2008 Intel Corporation. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - * Intel Corporation - * Inaky Perez-Gonzalez - * - Initial implementation - * - * - * This file declares the user/kernel protocol that is spoken over - * Generic Netlink, as well as any type declaration that is to be used - * by kernel and user space. - * - * It is intended for user space to clone it verbatim to use it as a - * primary reference for definitions. - * - * Stuff intended for kernel usage as well as full protocol and stack - * documentation is rooted in include/net/wimax.h. - */ - -#ifndef __LINUX__WIMAX_H__ -#define __LINUX__WIMAX_H__ - -#include - -enum { - /** - * Version of the interface (unsigned decimal, MMm, max 25.5) - * M - Major: change if removing or modifying an existing call. - * m - minor: change when adding a new call - */ - WIMAX_GNL_VERSION = 01, - /* Generic NetLink attributes */ - WIMAX_GNL_ATTR_INVALID = 0x00, - WIMAX_GNL_ATTR_MAX = 10, -}; - - -/* - * Generic NetLink operations - * - * Most of these map to an API call; _OP_ stands for operation, _RP_ - * for reply and _RE_ for report (aka: signal). - */ -enum { - WIMAX_GNL_OP_MSG_FROM_USER, /* User to kernel message */ - WIMAX_GNL_OP_MSG_TO_USER, /* Kernel to user message */ - WIMAX_GNL_OP_RFKILL, /* Run wimax_rfkill() */ - WIMAX_GNL_OP_RESET, /* Run wimax_rfkill() */ - WIMAX_GNL_RE_STATE_CHANGE, /* Report: status change */ - WIMAX_GNL_OP_STATE_GET, /* Request for current state */ -}; - - -/* Message from user / to user */ -enum { - WIMAX_GNL_MSG_IFIDX = 1, - WIMAX_GNL_MSG_PIPE_NAME, - WIMAX_GNL_MSG_DATA, -}; - - -/* - * wimax_rfkill() - * - * The state of the radio (ON/OFF) is mapped to the rfkill subsystem's - * switch state (DISABLED/ENABLED). - */ -enum wimax_rf_state { - WIMAX_RF_OFF = 0, /* Radio is off, rfkill on/enabled */ - WIMAX_RF_ON = 1, /* Radio is on, rfkill off/disabled */ - WIMAX_RF_QUERY = 2, -}; - -/* Attributes */ -enum { - WIMAX_GNL_RFKILL_IFIDX = 1, - WIMAX_GNL_RFKILL_STATE, -}; - - -/* Attributes for wimax_reset() */ -enum { - WIMAX_GNL_RESET_IFIDX = 1, -}; - -/* Attributes for wimax_state_get() */ -enum { - WIMAX_GNL_STGET_IFIDX = 1, -}; - -/* - * Attributes for the Report State Change - * - * For now we just have the old and new states; new attributes might - * be added later on. - */ -enum { - WIMAX_GNL_STCH_IFIDX = 1, - WIMAX_GNL_STCH_STATE_OLD, - WIMAX_GNL_STCH_STATE_NEW, -}; - - -/** - * enum wimax_st - The different states of a WiMAX device - * @__WIMAX_ST_NULL: The device structure has been allocated and zeroed, - * but still wimax_dev_add() hasn't been called. There is no state. - * - * @WIMAX_ST_DOWN: The device has been registered with the WiMAX and - * networking stacks, but it is not initialized (normally that is - * done with 'ifconfig DEV up' [or equivalent], which can upload - * firmware and enable communications with the device). - * In this state, the device is powered down and using as less - * power as possible. - * This state is the default after a call to wimax_dev_add(). It - * is ok to have drivers move directly to %WIMAX_ST_UNINITIALIZED - * or %WIMAX_ST_RADIO_OFF in _probe() after the call to - * wimax_dev_add(). - * It is recommended that the driver leaves this state when - * calling 'ifconfig DEV up' and enters it back on 'ifconfig DEV - * down'. - * - * @__WIMAX_ST_QUIESCING: The device is being torn down, so no API - * operations are allowed to proceed except the ones needed to - * complete the device clean up process. - * - * @WIMAX_ST_UNINITIALIZED: [optional] Communication with the device - * is setup, but the device still requires some configuration - * before being operational. - * Some WiMAX API calls might work. - * - * @WIMAX_ST_RADIO_OFF: The device is fully up; radio is off (wether - * by hardware or software switches). - * It is recommended to always leave the device in this state - * after initialization. - * - * @WIMAX_ST_READY: The device is fully up and radio is on. - * - * @WIMAX_ST_SCANNING: [optional] The device has been instructed to - * scan. In this state, the device cannot be actively connected to - * a network. - * - * @WIMAX_ST_CONNECTING: The device is connecting to a network. This - * state exists because in some devices, the connect process can - * include a number of negotiations between user space, kernel - * space and the device. User space needs to know what the device - * is doing. If the connect sequence in a device is atomic and - * fast, the device can transition directly to CONNECTED - * - * @WIMAX_ST_CONNECTED: The device is connected to a network. - * - * @__WIMAX_ST_INVALID: This is an invalid state used to mark the - * maximum numeric value of states. - * - * Description: - * - * Transitions from one state to another one are atomic and can only - * be caused in kernel space with wimax_state_change(). To read the - * state, use wimax_state_get(). - * - * States starting with __ are internal and shall not be used or - * referred to by drivers or userspace. They look ugly, but that's the - * point -- if any use is made non-internal to the stack, it is easier - * to catch on review. - * - * All API operations [with well defined exceptions] will take the - * device mutex before starting and then check the state. If the state - * is %__WIMAX_ST_NULL, %WIMAX_ST_DOWN, %WIMAX_ST_UNINITIALIZED or - * %__WIMAX_ST_QUIESCING, it will drop the lock and quit with - * -%EINVAL, -%ENOMEDIUM, -%ENOTCONN or -%ESHUTDOWN. - * - * The order of the definitions is important, so we can do numerical - * comparisons (eg: < %WIMAX_ST_RADIO_OFF means the device is not ready - * to operate). - */ -/* - * The allowed state transitions are described in the table below - * (states in rows can go to states in columns where there is an X): - * - * UNINI RADIO READY SCAN CONNEC CONNEC - * NULL DOWN QUIESCING TIALIZED OFF NING TING TED - * NULL - x - * DOWN - x x x - * QUIESCING x - - * UNINITIALIZED x - x - * RADIO_OFF x - x - * READY x x - x x x - * SCANNING x x x - x x - * CONNECTING x x x x - x - * CONNECTED x x x - - * - * This table not available in kernel-doc because the formatting messes it up. - */ - enum wimax_st { - __WIMAX_ST_NULL = 0, - WIMAX_ST_DOWN, - __WIMAX_ST_QUIESCING, - WIMAX_ST_UNINITIALIZED, - WIMAX_ST_RADIO_OFF, - WIMAX_ST_READY, - WIMAX_ST_SCANNING, - WIMAX_ST_CONNECTING, - WIMAX_ST_CONNECTED, - __WIMAX_ST_INVALID /* Always keep last */ -}; - - -#endif /* #ifndef __LINUX__WIMAX_H__ */ diff --git a/linux-headers/include/linux/wimax/i2400m.h b/linux-headers/include/linux/wimax/i2400m.h deleted file mode 100644 index fd198bc24a3..00000000000 --- a/linux-headers/include/linux/wimax/i2400m.h +++ /dev/null @@ -1,572 +0,0 @@ -/* - * Intel Wireless WiMax Connection 2400m - * Host-Device protocol interface definitions - * - * - * Copyright (C) 2007-2008 Intel Corporation. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - * Intel Corporation - * Inaky Perez-Gonzalez - * - Initial implementation - * - * - * This header defines the data structures and constants used to - * communicate with the device. - * - * BOOTMODE/BOOTROM/FIRMWARE UPLOAD PROTOCOL - * - * The firmware upload protocol is quite simple and only requires a - * handful of commands. See drivers/net/wimax/i2400m/fw.c for more - * details. - * - * The BCF data structure is for the firmware file header. - * - * - * THE DATA / CONTROL PROTOCOL - * - * This is the normal protocol spoken with the device once the - * firmware is uploaded. It transports data payloads and control - * messages back and forth. - * - * It consists 'messages' that pack one or more payloads each. The - * format is described in detail in drivers/net/wimax/i2400m/rx.c and - * tx.c. - * - * - * THE L3L4 PROTOCOL - * - * The term L3L4 refers to Layer 3 (the device), Layer 4 (the - * driver/host software). - * - * This is the control protocol used by the host to control the i2400m - * device (scan, connect, disconnect...). This is sent to / received - * as control frames. These frames consist of a header and zero or - * more TLVs with information. We call each control frame a "message". - * - * Each message is composed of: - * - * HEADER - * [TLV0 + PAYLOAD0] - * [TLV1 + PAYLOAD1] - * [...] - * [TLVN + PAYLOADN] - * - * The HEADER is defined by 'struct i2400m_l3l4_hdr'. The payloads are - * defined by a TLV structure (Type Length Value) which is a 'header' - * (struct i2400m_tlv_hdr) and then the payload. - * - * All integers are represented as Little Endian. - * - * - REQUESTS AND EVENTS - * - * The requests can be clasified as follows: - * - * COMMAND: implies a request from the host to the device requesting - * an action being performed. The device will reply with a - * message (with the same type as the command), status and - * no (TLV) payload. Execution of a command might cause - * events (of different type) to be sent later on as - * device's state changes. - * - * GET/SET: similar to COMMAND, but will not cause other - * EVENTs. The reply, in the case of GET, will contain - * TLVs with the requested information. - * - * EVENT: asynchronous messages sent from the device, maybe as a - * consequence of previous COMMANDs but disassociated from - * them. - * - * Only one request might be pending at the same time (ie: don't - * parallelize nor post another GET request before the previous - * COMMAND has been acknowledged with it's corresponding reply by the - * device). - * - * The different requests and their formats are described below: - * - * I2400M_MT_* Message types - * I2400M_MS_* Message status (for replies, events) - * i2400m_tlv_* TLVs - * - * data types are named 'struct i2400m_msg_OPNAME', OPNAME matching the - * operation. - */ - -#ifndef __LINUX__WIMAX__I2400M_H__ -#define __LINUX__WIMAX__I2400M_H__ - -#include -#include - -/* - * Host Device Interface (HDI) common to all busses - */ - -/* Boot-mode (firmware upload mode) commands */ - -/* Header for the firmware file */ -struct i2400m_bcf_hdr { - __le32 module_type; - __le32 header_len; - __le32 header_version; - __le32 module_id; - __le32 module_vendor; - __le32 date; /* BCD YYYMMDD */ - __le32 size; /* in dwords */ - __le32 key_size; /* in dwords */ - __le32 modulus_size; /* in dwords */ - __le32 exponent_size; /* in dwords */ - __u8 reserved[88]; -} __attribute__ ((packed)); - -/* Boot mode opcodes */ -enum i2400m_brh_opcode { - I2400M_BRH_READ = 1, - I2400M_BRH_WRITE = 2, - I2400M_BRH_JUMP = 3, - I2400M_BRH_SIGNED_JUMP = 8, - I2400M_BRH_HASH_PAYLOAD_ONLY = 9, -}; - -/* Boot mode command masks and stuff */ -enum i2400m_brh { - I2400M_BRH_SIGNATURE = 0xcbbc0000, - I2400M_BRH_SIGNATURE_MASK = 0xffff0000, - I2400M_BRH_SIGNATURE_SHIFT = 16, - I2400M_BRH_OPCODE_MASK = 0x0000000f, - I2400M_BRH_RESPONSE_MASK = 0x000000f0, - I2400M_BRH_RESPONSE_SHIFT = 4, - I2400M_BRH_DIRECT_ACCESS = 0x00000400, - I2400M_BRH_RESPONSE_REQUIRED = 0x00000200, - I2400M_BRH_USE_CHECKSUM = 0x00000100, -}; - - -/** - * i2400m_bootrom_header - Header for a boot-mode command - * - * @cmd: the above command descriptor - * @target_addr: where on the device memory should the action be performed. - * @data_size: for read/write, amount of data to be read/written - * @block_checksum: checksum value (if applicable) - * @payload: the beginning of data attached to this header - */ -struct i2400m_bootrom_header { - __le32 command; /* Compose with enum i2400_brh */ - __le32 target_addr; - __le32 data_size; - __le32 block_checksum; - char payload[0]; -} __attribute__ ((packed)); - - -/* - * Data / control protocol - */ - -/* Packet types for the host-device interface */ -enum i2400m_pt { - I2400M_PT_DATA = 0, - I2400M_PT_CTRL, - I2400M_PT_TRACE, /* For device debug */ - I2400M_PT_RESET_WARM, /* device reset */ - I2400M_PT_RESET_COLD, /* USB[transport] reset, like reconnect */ - I2400M_PT_EDATA, /* Extended RX data */ - I2400M_PT_ILLEGAL -}; - - -/* - * Payload for a data packet - * - * This is prefixed to each and every outgoing DATA type. - */ -struct i2400m_pl_data_hdr { - __le32 reserved; -} __attribute__((packed)); - - -/* - * Payload for an extended data packet - * - * New in fw v1.4 - * - * @reorder: if this payload has to be reorder or not (and how) - * @cs: the type of data in the packet, as defined per (802.16e - * T11.13.19.1). Currently only 2 (IPv4 packet) supported. - * - * This is prefixed to each and every INCOMING DATA packet. - */ -struct i2400m_pl_edata_hdr { - __le32 reorder; /* bits defined in i2400m_ro */ - __u8 cs; - __u8 reserved[11]; -} __attribute__((packed)); - -enum i2400m_cs { - I2400M_CS_IPV4_0 = 0, - I2400M_CS_IPV4 = 2, -}; - -enum i2400m_ro { - I2400M_RO_NEEDED = 0x01, - I2400M_RO_TYPE = 0x03, - I2400M_RO_TYPE_SHIFT = 1, - I2400M_RO_CIN = 0x0f, - I2400M_RO_CIN_SHIFT = 4, - I2400M_RO_FBN = 0x07ff, - I2400M_RO_FBN_SHIFT = 8, - I2400M_RO_SN = 0x07ff, - I2400M_RO_SN_SHIFT = 21, -}; - -enum i2400m_ro_type { - I2400M_RO_TYPE_RESET = 0, - I2400M_RO_TYPE_PACKET, - I2400M_RO_TYPE_WS, - I2400M_RO_TYPE_PACKET_WS, -}; - - -/* Misc constants */ -enum { - I2400M_PL_ALIGN = 16, /* Payload data size alignment */ - I2400M_PL_SIZE_MAX = 0x3EFF, - I2400M_MAX_PLS_IN_MSG = 60, - /* protocol barkers: sync sequences; for notifications they - * are sent in groups of four. */ - I2400M_H2D_PREVIEW_BARKER = 0xcafe900d, - I2400M_COLD_RESET_BARKER = 0xc01dc01d, - I2400M_WARM_RESET_BARKER = 0x50f750f7, - I2400M_NBOOT_BARKER = 0xdeadbeef, - I2400M_SBOOT_BARKER = 0x0ff1c1a1, - I2400M_SBOOT_BARKER_6050 = 0x80000001, - I2400M_ACK_BARKER = 0xfeedbabe, - I2400M_D2H_MSG_BARKER = 0xbeefbabe, -}; - - -/* - * Hardware payload descriptor - * - * Bitfields encoded in a struct to enforce typing semantics. - * - * Look in rx.c and tx.c for a full description of the format. - */ -struct i2400m_pld { - __le32 val; -} __attribute__ ((packed)); - -#define I2400M_PLD_SIZE_MASK 0x00003fff -#define I2400M_PLD_TYPE_SHIFT 16 -#define I2400M_PLD_TYPE_MASK 0x000f0000 - -/* - * Header for a TX message or RX message - * - * @barker: preamble - * @size: used for management of the FIFO queue buffer; before - * sending, this is converted to be a real preamble. This - * indicates the real size of the TX message that starts at this - * point. If the highest bit is set, then this message is to be - * skipped. - * @sequence: sequence number of this message - * @offset: offset where the message itself starts -- see the comments - * in the file header about message header and payload descriptor - * alignment. - * @num_pls: number of payloads in this message - * @padding: amount of padding bytes at the end of the message to make - * it be of block-size aligned - * - * Look in rx.c and tx.c for a full description of the format. - */ -struct i2400m_msg_hdr { - union { - __le32 barker; - __u32 size; /* same size type as barker!! */ - }; - union { - __le32 sequence; - __u32 offset; /* same size type as barker!! */ - }; - __le16 num_pls; - __le16 rsv1; - __le16 padding; - __le16 rsv2; - struct i2400m_pld pld[0]; -} __attribute__ ((packed)); - - - -/* - * L3/L4 control protocol - */ - -enum { - /* Interface version */ - I2400M_L3L4_VERSION = 0x0100, -}; - -/* Message types */ -enum i2400m_mt { - I2400M_MT_RESERVED = 0x0000, - I2400M_MT_INVALID = 0xffff, - I2400M_MT_REPORT_MASK = 0x8000, - - I2400M_MT_GET_SCAN_RESULT = 0x4202, - I2400M_MT_SET_SCAN_PARAM = 0x4402, - I2400M_MT_CMD_RF_CONTROL = 0x4602, - I2400M_MT_CMD_SCAN = 0x4603, - I2400M_MT_CMD_CONNECT = 0x4604, - I2400M_MT_CMD_DISCONNECT = 0x4605, - I2400M_MT_CMD_EXIT_IDLE = 0x4606, - I2400M_MT_GET_LM_VERSION = 0x5201, - I2400M_MT_GET_DEVICE_INFO = 0x5202, - I2400M_MT_GET_LINK_STATUS = 0x5203, - I2400M_MT_GET_STATISTICS = 0x5204, - I2400M_MT_GET_STATE = 0x5205, - I2400M_MT_GET_MEDIA_STATUS = 0x5206, - I2400M_MT_SET_INIT_CONFIG = 0x5404, - I2400M_MT_CMD_INIT = 0x5601, - I2400M_MT_CMD_TERMINATE = 0x5602, - I2400M_MT_CMD_MODE_OF_OP = 0x5603, - I2400M_MT_CMD_RESET_DEVICE = 0x5604, - I2400M_MT_CMD_MONITOR_CONTROL = 0x5605, - I2400M_MT_CMD_ENTER_POWERSAVE = 0x5606, - I2400M_MT_GET_TLS_OPERATION_RESULT = 0x6201, - I2400M_MT_SET_EAP_SUCCESS = 0x6402, - I2400M_MT_SET_EAP_FAIL = 0x6403, - I2400M_MT_SET_EAP_KEY = 0x6404, - I2400M_MT_CMD_SEND_EAP_RESPONSE = 0x6602, - I2400M_MT_REPORT_SCAN_RESULT = 0xc002, - I2400M_MT_REPORT_STATE = 0xd002, - I2400M_MT_REPORT_POWERSAVE_READY = 0xd005, - I2400M_MT_REPORT_EAP_REQUEST = 0xe002, - I2400M_MT_REPORT_EAP_RESTART = 0xe003, - I2400M_MT_REPORT_ALT_ACCEPT = 0xe004, - I2400M_MT_REPORT_KEY_REQUEST = 0xe005, -}; - - -/* - * Message Ack Status codes - * - * When a message is replied-to, this status is reported. - */ -enum i2400m_ms { - I2400M_MS_DONE_OK = 0, - I2400M_MS_DONE_IN_PROGRESS = 1, - I2400M_MS_INVALID_OP = 2, - I2400M_MS_BAD_STATE = 3, - I2400M_MS_ILLEGAL_VALUE = 4, - I2400M_MS_MISSING_PARAMS = 5, - I2400M_MS_VERSION_ERROR = 6, - I2400M_MS_ACCESSIBILITY_ERROR = 7, - I2400M_MS_BUSY = 8, - I2400M_MS_CORRUPTED_TLV = 9, - I2400M_MS_UNINITIALIZED = 10, - I2400M_MS_UNKNOWN_ERROR = 11, - I2400M_MS_PRODUCTION_ERROR = 12, - I2400M_MS_NO_RF = 13, - I2400M_MS_NOT_READY_FOR_POWERSAVE = 14, - I2400M_MS_THERMAL_CRITICAL = 15, - I2400M_MS_MAX -}; - - -/** - * i2400m_tlv - enumeration of the different types of TLVs - * - * TLVs stand for type-length-value and are the header for a payload - * composed of almost anything. Each payload has a type assigned - * and a length. - */ -enum i2400m_tlv { - I2400M_TLV_L4_MESSAGE_VERSIONS = 129, - I2400M_TLV_SYSTEM_STATE = 141, - I2400M_TLV_MEDIA_STATUS = 161, - I2400M_TLV_RF_OPERATION = 162, - I2400M_TLV_RF_STATUS = 163, - I2400M_TLV_DEVICE_RESET_TYPE = 132, - I2400M_TLV_CONFIG_IDLE_PARAMETERS = 601, - I2400M_TLV_CONFIG_IDLE_TIMEOUT = 611, - I2400M_TLV_CONFIG_D2H_DATA_FORMAT = 614, - I2400M_TLV_CONFIG_DL_HOST_REORDER = 615, -}; - - -struct i2400m_tlv_hdr { - __le16 type; - __le16 length; /* payload's */ - __u8 pl[0]; -} __attribute__((packed)); - - -struct i2400m_l3l4_hdr { - __le16 type; - __le16 length; /* payload's */ - __le16 version; - __le16 resv1; - __le16 status; - __le16 resv2; - struct i2400m_tlv_hdr pl[0]; -} __attribute__((packed)); - - -/** - * i2400m_system_state - different states of the device - */ -enum i2400m_system_state { - I2400M_SS_UNINITIALIZED = 1, - I2400M_SS_INIT, - I2400M_SS_READY, - I2400M_SS_SCAN, - I2400M_SS_STANDBY, - I2400M_SS_CONNECTING, - I2400M_SS_WIMAX_CONNECTED, - I2400M_SS_DATA_PATH_CONNECTED, - I2400M_SS_IDLE, - I2400M_SS_DISCONNECTING, - I2400M_SS_OUT_OF_ZONE, - I2400M_SS_SLEEPACTIVE, - I2400M_SS_PRODUCTION, - I2400M_SS_CONFIG, - I2400M_SS_RF_OFF, - I2400M_SS_RF_SHUTDOWN, - I2400M_SS_DEVICE_DISCONNECT, - I2400M_SS_MAX, -}; - - -/** - * i2400m_tlv_system_state - report on the state of the system - * - * @state: see enum i2400m_system_state - */ -struct i2400m_tlv_system_state { - struct i2400m_tlv_hdr hdr; - __le32 state; -} __attribute__((packed)); - - -struct i2400m_tlv_l4_message_versions { - struct i2400m_tlv_hdr hdr; - __le16 major; - __le16 minor; - __le16 branch; - __le16 reserved; -} __attribute__((packed)); - - -struct i2400m_tlv_detailed_device_info { - struct i2400m_tlv_hdr hdr; - __u8 reserved1[400]; - __u8 mac_address[ETH_ALEN]; - __u8 reserved2[2]; -} __attribute__((packed)); - - -enum i2400m_rf_switch_status { - I2400M_RF_SWITCH_ON = 1, - I2400M_RF_SWITCH_OFF = 2, -}; - -struct i2400m_tlv_rf_switches_status { - struct i2400m_tlv_hdr hdr; - __u8 sw_rf_switch; /* 1 ON, 2 OFF */ - __u8 hw_rf_switch; /* 1 ON, 2 OFF */ - __u8 reserved[2]; -} __attribute__((packed)); - - -enum { - i2400m_rf_operation_on = 1, - i2400m_rf_operation_off = 2 -}; - -struct i2400m_tlv_rf_operation { - struct i2400m_tlv_hdr hdr; - __le32 status; /* 1 ON, 2 OFF */ -} __attribute__((packed)); - - -enum i2400m_tlv_reset_type { - I2400M_RESET_TYPE_COLD = 1, - I2400M_RESET_TYPE_WARM -}; - -struct i2400m_tlv_device_reset_type { - struct i2400m_tlv_hdr hdr; - __le32 reset_type; -} __attribute__((packed)); - - -struct i2400m_tlv_config_idle_parameters { - struct i2400m_tlv_hdr hdr; - __le32 idle_timeout; /* 100 to 300000 ms [5min], 100 increments - * 0 disabled */ - __le32 idle_paging_interval; /* frames */ -} __attribute__((packed)); - - -enum i2400m_media_status { - I2400M_MEDIA_STATUS_LINK_UP = 1, - I2400M_MEDIA_STATUS_LINK_DOWN, - I2400M_MEDIA_STATUS_LINK_RENEW, -}; - -struct i2400m_tlv_media_status { - struct i2400m_tlv_hdr hdr; - __le32 media_status; -} __attribute__((packed)); - - -/* New in v1.4 */ -struct i2400m_tlv_config_idle_timeout { - struct i2400m_tlv_hdr hdr; - __le32 timeout; /* 100 to 300000 ms [5min], 100 increments - * 0 disabled */ -} __attribute__((packed)); - -/* New in v1.4 -- for backward compat, will be removed */ -struct i2400m_tlv_config_d2h_data_format { - struct i2400m_tlv_hdr hdr; - __u8 format; /* 0 old format, 1 enhanced */ - __u8 reserved[3]; -} __attribute__((packed)); - -/* New in v1.4 */ -struct i2400m_tlv_config_dl_host_reorder { - struct i2400m_tlv_hdr hdr; - __u8 reorder; /* 0 disabled, 1 enabled */ - __u8 reserved[3]; -} __attribute__((packed)); - - -#endif /* #ifndef __LINUX__WIMAX__I2400M_H__ */ diff --git a/linux-headers/include/linux/wireless.h b/linux-headers/include/linux/wireless.h index dc692c94ec2..ad31d148064 100644 --- a/linux-headers/include/linux/wireless.h +++ b/linux-headers/include/linux/wireless.h @@ -831,7 +831,7 @@ struct iw_encode_ext { * individual keys */ __u16 alg; /* IW_ENCODE_ALG_* */ __u16 key_len; - __u8 key[0]; + __u8 key[]; }; /* SIOCSIWMLME data */ diff --git a/linux-headers/include/linux/wwan.h b/linux-headers/include/linux/wwan.h new file mode 100644 index 00000000000..2c0ccb4f142 --- /dev/null +++ b/linux-headers/include/linux/wwan.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ +/* + * Copyright (C) 2021 Intel Corporation. + */ +#ifndef _WWAN_H_ +#define _WWAN_H_ + +enum { + IFLA_WWAN_UNSPEC, + IFLA_WWAN_LINK_ID, /* u32 */ + + __IFLA_WWAN_MAX +}; +#define IFLA_WWAN_MAX (__IFLA_WWAN_MAX - 1) + +#endif /* _WWAN_H_ */ diff --git a/linux-headers/include/linux/xfrm.h b/linux-headers/include/linux/xfrm.h index eec67a2be43..10bdef8f6a4 100644 --- a/linux-headers/include/linux/xfrm.h +++ b/linux-headers/include/linux/xfrm.h @@ -33,7 +33,7 @@ struct xfrm_sec_ctx { __u8 ctx_alg; __u16 ctx_len; __u32 ctx_sid; - char ctx_str[0]; + char ctx_str[]; }; /* Security Context Domains of Interpretation */ @@ -96,27 +96,27 @@ struct xfrm_replay_state_esn { __u32 oseq_hi; __u32 seq_hi; __u32 replay_window; - __u32 bmp[0]; + __u32 bmp[]; }; struct xfrm_algo { char alg_name[64]; unsigned int alg_key_len; /* in bits */ - char alg_key[0]; + char alg_key[]; }; struct xfrm_algo_auth { char alg_name[64]; unsigned int alg_key_len; /* in bits */ unsigned int alg_trunc_len; /* in bits */ - char alg_key[0]; + char alg_key[]; }; struct xfrm_algo_aead { char alg_name[64]; unsigned int alg_key_len; /* in bits */ unsigned int alg_icv_len; /* in bits */ - char alg_key[0]; + char alg_key[]; }; struct xfrm_stats { @@ -215,6 +215,11 @@ enum { XFRM_MSG_MAPPING, #define XFRM_MSG_MAPPING XFRM_MSG_MAPPING + + XFRM_MSG_SETDEFAULT, +#define XFRM_MSG_SETDEFAULT XFRM_MSG_SETDEFAULT + XFRM_MSG_GETDEFAULT, +#define XFRM_MSG_GETDEFAULT XFRM_MSG_GETDEFAULT __XFRM_MSG_MAX }; #define XFRM_MSG_MAX (__XFRM_MSG_MAX - 1) @@ -291,7 +296,7 @@ enum xfrm_attr_type_t { XFRMA_ETIMER_THRESH, XFRMA_SRCADDR, /* xfrm_address_t */ XFRMA_COADDR, /* xfrm_address_t */ - XFRMA_LASTUSED, /* unsigned long */ + XFRMA_LASTUSED, /* __u64 */ XFRMA_POLICY_TYPE, /* struct xfrm_userpolicy_type */ XFRMA_MIGRATE, XFRMA_ALG_AEAD, /* struct xfrm_algo_aead */ @@ -308,6 +313,7 @@ enum xfrm_attr_type_t { XFRMA_SET_MARK, /* __u32 */ XFRMA_SET_MARK_MASK, /* __u32 */ XFRMA_IF_ID, /* __u32 */ + XFRMA_MTIMER_THRESH, /* __u32 in seconds for input SA */ __XFRMA_MAX #define XFRMA_OUTPUT_MARK XFRMA_SET_MARK /* Compatibility */ @@ -505,8 +511,29 @@ struct xfrm_user_offload { int ifindex; __u8 flags; }; +/* This flag was exposed without any kernel code that supports it. + * Unfortunately, strongswan has the code that sets this flag, + * which makes it impossible to reuse this bit. + * + * So leave it here to make sure that it won't be reused by mistake. + */ #define XFRM_OFFLOAD_IPV6 1 #define XFRM_OFFLOAD_INBOUND 2 +/* Two bits above are relevant for state path only, while + * offload is used for both policy and state flows. + * + * In policy offload mode, they are free and can be safely reused. + */ +#define XFRM_OFFLOAD_PACKET 4 + +struct xfrm_userpolicy_default { +#define XFRM_USERPOLICY_UNSPEC 0 +#define XFRM_USERPOLICY_BLOCK 1 +#define XFRM_USERPOLICY_ACCEPT 2 + __u8 in; + __u8 fwd; + __u8 out; +}; /* backwards compatibility for userspace */ #define XFRMGRP_ACQUIRE 1 diff --git a/linux-headers/include/misc/fastrpc.h b/linux-headers/include/misc/fastrpc.h index 0a89f95463f..f33d914d8f4 100644 --- a/linux-headers/include/misc/fastrpc.h +++ b/linux-headers/include/misc/fastrpc.h @@ -13,12 +13,65 @@ #define FASTRPC_IOCTL_MMAP _IOWR('R', 6, struct fastrpc_req_mmap) #define FASTRPC_IOCTL_MUNMAP _IOWR('R', 7, struct fastrpc_req_munmap) #define FASTRPC_IOCTL_INIT_ATTACH_SNS _IO('R', 8) +#define FASTRPC_IOCTL_INIT_CREATE_STATIC _IOWR('R', 9, struct fastrpc_init_create_static) +#define FASTRPC_IOCTL_MEM_MAP _IOWR('R', 10, struct fastrpc_mem_map) +#define FASTRPC_IOCTL_MEM_UNMAP _IOWR('R', 11, struct fastrpc_mem_unmap) +#define FASTRPC_IOCTL_GET_DSP_INFO _IOWR('R', 13, struct fastrpc_ioctl_capability) + +/** + * enum fastrpc_map_flags - control flags for mapping memory on DSP user process + * @FASTRPC_MAP_STATIC: Map memory pages with RW- permission and CACHE WRITEBACK. + * The driver is responsible for cache maintenance when passed + * the buffer to FastRPC calls. Same virtual address will be + * assigned for subsequent FastRPC calls. + * @FASTRPC_MAP_RESERVED: Reserved + * @FASTRPC_MAP_FD: Map memory pages with RW- permission and CACHE WRITEBACK. + * Mapping tagged with a file descriptor. User is responsible for + * CPU and DSP cache maintenance for the buffer. Get virtual address + * of buffer on DSP using HAP_mmap_get() and HAP_mmap_put() APIs. + * @FASTRPC_MAP_FD_DELAYED: Mapping delayed until user call HAP_mmap() and HAP_munmap() + * functions on DSP. It is useful to map a buffer with cache modes + * other than default modes. User is responsible for CPU and DSP + * cache maintenance for the buffer. + * @FASTRPC_MAP_FD_NOMAP: This flag is used to skip CPU mapping, + * otherwise behaves similar to FASTRPC_MAP_FD_DELAYED flag. + * @FASTRPC_MAP_MAX: max count for flags + * + */ +enum fastrpc_map_flags { + FASTRPC_MAP_STATIC = 0, + FASTRPC_MAP_RESERVED, + FASTRPC_MAP_FD = 2, + FASTRPC_MAP_FD_DELAYED, + FASTRPC_MAP_FD_NOMAP = 16, + FASTRPC_MAP_MAX, +}; + +enum fastrpc_proc_attr { + /* Macro for Debug attr */ + FASTRPC_MODE_DEBUG = (1 << 0), + /* Macro for Ptrace */ + FASTRPC_MODE_PTRACE = (1 << 1), + /* Macro for CRC Check */ + FASTRPC_MODE_CRC = (1 << 2), + /* Macro for Unsigned PD */ + FASTRPC_MODE_UNSIGNED_MODULE = (1 << 3), + /* Macro for Adaptive QoS */ + FASTRPC_MODE_ADAPTIVE_QOS = (1 << 4), + /* Macro for System Process */ + FASTRPC_MODE_SYSTEM_PROCESS = (1 << 5), + /* Macro for Prvileged Process */ + FASTRPC_MODE_PRIVILEGED = (1 << 6), +}; + +/* Fastrpc attribute for memory protection of buffers */ +#define FASTRPC_ATTR_SECUREMAP (1) struct fastrpc_invoke_args { __u64 ptr; __u64 length; __s32 fd; - __u32 reserved; + __u32 attr; }; struct fastrpc_invoke { @@ -35,6 +88,12 @@ struct fastrpc_init_create { __u64 file; /* pointer to elf file */ }; +struct fastrpc_init_create_static { + __u32 namelen; /* length of pd process name */ + __u32 memlen; + __u64 name; /* pd process name */ +}; + struct fastrpc_alloc_dma_buf { __s32 fd; /* fd */ __u32 flags; /* flags to map with */ @@ -49,9 +108,36 @@ struct fastrpc_req_mmap { __u64 vaddrout; /* dsp virtual address */ }; +struct fastrpc_mem_map { + __s32 version; + __s32 fd; /* fd */ + __s32 offset; /* buffer offset */ + __u32 flags; /* flags defined in enum fastrpc_map_flags */ + __u64 vaddrin; /* buffer virtual address */ + __u64 length; /* buffer length */ + __u64 vaddrout; /* [out] remote virtual address */ + __s32 attrs; /* buffer attributes used for SMMU mapping */ + __s32 reserved[4]; +}; + struct fastrpc_req_munmap { __u64 vaddrout; /* address to unmap */ __u64 size; /* size */ }; +struct fastrpc_mem_unmap { + __s32 vesion; + __s32 fd; /* fd */ + __u64 vaddr; /* remote process (dsp) virtual address */ + __u64 length; /* buffer size */ + __s32 reserved[5]; +}; + +struct fastrpc_ioctl_capability { + __u32 domain; + __u32 attribute_id; + __u32 capability; /* dsp capability */ + __u32 reserved[4]; +}; + #endif /* __QCOM_FASTRPC_H__ */ diff --git a/linux-headers/include/misc/habanalabs.h b/linux-headers/include/misc/habanalabs.h deleted file mode 100644 index 9705b8adb60..00000000000 --- a/linux-headers/include/misc/habanalabs.h +++ /dev/null @@ -1,1002 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note - * - * Copyright 2016-2020 HabanaLabs, Ltd. - * All Rights Reserved. - * - */ - -#ifndef HABANALABS_H_ -#define HABANALABS_H_ - -#include -#include - -/* - * Defines that are asic-specific but constitutes as ABI between kernel driver - * and userspace - */ -#define GOYA_KMD_SRAM_RESERVED_SIZE_FROM_START 0x8000 /* 32KB */ -#define GAUDI_DRIVER_SRAM_RESERVED_SIZE_FROM_START 0x80 /* 128 bytes */ - -#define GAUDI_FIRST_AVAILABLE_W_S_SYNC_OBJECT 48 -#define GAUDI_FIRST_AVAILABLE_W_S_MONITOR 24 -/* - * Goya queue Numbering - * - * The external queues (PCI DMA channels) MUST be before the internal queues - * and each group (PCI DMA channels and internal) must be contiguous inside - * itself but there can be a gap between the two groups (although not - * recommended) - */ - -enum goya_queue_id { - GOYA_QUEUE_ID_DMA_0 = 0, - GOYA_QUEUE_ID_DMA_1 = 1, - GOYA_QUEUE_ID_DMA_2 = 2, - GOYA_QUEUE_ID_DMA_3 = 3, - GOYA_QUEUE_ID_DMA_4 = 4, - GOYA_QUEUE_ID_CPU_PQ = 5, - GOYA_QUEUE_ID_MME = 6, /* Internal queues start here */ - GOYA_QUEUE_ID_TPC0 = 7, - GOYA_QUEUE_ID_TPC1 = 8, - GOYA_QUEUE_ID_TPC2 = 9, - GOYA_QUEUE_ID_TPC3 = 10, - GOYA_QUEUE_ID_TPC4 = 11, - GOYA_QUEUE_ID_TPC5 = 12, - GOYA_QUEUE_ID_TPC6 = 13, - GOYA_QUEUE_ID_TPC7 = 14, - GOYA_QUEUE_ID_SIZE -}; - -/* - * Gaudi queue Numbering - * External queues (PCI DMA channels) are DMA_0_*, DMA_1_* and DMA_5_*. - * Except one CPU queue, all the rest are internal queues. - */ - -enum gaudi_queue_id { - GAUDI_QUEUE_ID_DMA_0_0 = 0, /* external */ - GAUDI_QUEUE_ID_DMA_0_1 = 1, /* external */ - GAUDI_QUEUE_ID_DMA_0_2 = 2, /* external */ - GAUDI_QUEUE_ID_DMA_0_3 = 3, /* external */ - GAUDI_QUEUE_ID_DMA_1_0 = 4, /* external */ - GAUDI_QUEUE_ID_DMA_1_1 = 5, /* external */ - GAUDI_QUEUE_ID_DMA_1_2 = 6, /* external */ - GAUDI_QUEUE_ID_DMA_1_3 = 7, /* external */ - GAUDI_QUEUE_ID_CPU_PQ = 8, /* CPU */ - GAUDI_QUEUE_ID_DMA_2_0 = 9, /* internal */ - GAUDI_QUEUE_ID_DMA_2_1 = 10, /* internal */ - GAUDI_QUEUE_ID_DMA_2_2 = 11, /* internal */ - GAUDI_QUEUE_ID_DMA_2_3 = 12, /* internal */ - GAUDI_QUEUE_ID_DMA_3_0 = 13, /* internal */ - GAUDI_QUEUE_ID_DMA_3_1 = 14, /* internal */ - GAUDI_QUEUE_ID_DMA_3_2 = 15, /* internal */ - GAUDI_QUEUE_ID_DMA_3_3 = 16, /* internal */ - GAUDI_QUEUE_ID_DMA_4_0 = 17, /* internal */ - GAUDI_QUEUE_ID_DMA_4_1 = 18, /* internal */ - GAUDI_QUEUE_ID_DMA_4_2 = 19, /* internal */ - GAUDI_QUEUE_ID_DMA_4_3 = 20, /* internal */ - GAUDI_QUEUE_ID_DMA_5_0 = 21, /* external */ - GAUDI_QUEUE_ID_DMA_5_1 = 22, /* external */ - GAUDI_QUEUE_ID_DMA_5_2 = 23, /* external */ - GAUDI_QUEUE_ID_DMA_5_3 = 24, /* external */ - GAUDI_QUEUE_ID_DMA_6_0 = 25, /* internal */ - GAUDI_QUEUE_ID_DMA_6_1 = 26, /* internal */ - GAUDI_QUEUE_ID_DMA_6_2 = 27, /* internal */ - GAUDI_QUEUE_ID_DMA_6_3 = 28, /* internal */ - GAUDI_QUEUE_ID_DMA_7_0 = 29, /* internal */ - GAUDI_QUEUE_ID_DMA_7_1 = 30, /* internal */ - GAUDI_QUEUE_ID_DMA_7_2 = 31, /* internal */ - GAUDI_QUEUE_ID_DMA_7_3 = 32, /* internal */ - GAUDI_QUEUE_ID_MME_0_0 = 33, /* internal */ - GAUDI_QUEUE_ID_MME_0_1 = 34, /* internal */ - GAUDI_QUEUE_ID_MME_0_2 = 35, /* internal */ - GAUDI_QUEUE_ID_MME_0_3 = 36, /* internal */ - GAUDI_QUEUE_ID_MME_1_0 = 37, /* internal */ - GAUDI_QUEUE_ID_MME_1_1 = 38, /* internal */ - GAUDI_QUEUE_ID_MME_1_2 = 39, /* internal */ - GAUDI_QUEUE_ID_MME_1_3 = 40, /* internal */ - GAUDI_QUEUE_ID_TPC_0_0 = 41, /* internal */ - GAUDI_QUEUE_ID_TPC_0_1 = 42, /* internal */ - GAUDI_QUEUE_ID_TPC_0_2 = 43, /* internal */ - GAUDI_QUEUE_ID_TPC_0_3 = 44, /* internal */ - GAUDI_QUEUE_ID_TPC_1_0 = 45, /* internal */ - GAUDI_QUEUE_ID_TPC_1_1 = 46, /* internal */ - GAUDI_QUEUE_ID_TPC_1_2 = 47, /* internal */ - GAUDI_QUEUE_ID_TPC_1_3 = 48, /* internal */ - GAUDI_QUEUE_ID_TPC_2_0 = 49, /* internal */ - GAUDI_QUEUE_ID_TPC_2_1 = 50, /* internal */ - GAUDI_QUEUE_ID_TPC_2_2 = 51, /* internal */ - GAUDI_QUEUE_ID_TPC_2_3 = 52, /* internal */ - GAUDI_QUEUE_ID_TPC_3_0 = 53, /* internal */ - GAUDI_QUEUE_ID_TPC_3_1 = 54, /* internal */ - GAUDI_QUEUE_ID_TPC_3_2 = 55, /* internal */ - GAUDI_QUEUE_ID_TPC_3_3 = 56, /* internal */ - GAUDI_QUEUE_ID_TPC_4_0 = 57, /* internal */ - GAUDI_QUEUE_ID_TPC_4_1 = 58, /* internal */ - GAUDI_QUEUE_ID_TPC_4_2 = 59, /* internal */ - GAUDI_QUEUE_ID_TPC_4_3 = 60, /* internal */ - GAUDI_QUEUE_ID_TPC_5_0 = 61, /* internal */ - GAUDI_QUEUE_ID_TPC_5_1 = 62, /* internal */ - GAUDI_QUEUE_ID_TPC_5_2 = 63, /* internal */ - GAUDI_QUEUE_ID_TPC_5_3 = 64, /* internal */ - GAUDI_QUEUE_ID_TPC_6_0 = 65, /* internal */ - GAUDI_QUEUE_ID_TPC_6_1 = 66, /* internal */ - GAUDI_QUEUE_ID_TPC_6_2 = 67, /* internal */ - GAUDI_QUEUE_ID_TPC_6_3 = 68, /* internal */ - GAUDI_QUEUE_ID_TPC_7_0 = 69, /* internal */ - GAUDI_QUEUE_ID_TPC_7_1 = 70, /* internal */ - GAUDI_QUEUE_ID_TPC_7_2 = 71, /* internal */ - GAUDI_QUEUE_ID_TPC_7_3 = 72, /* internal */ - GAUDI_QUEUE_ID_NIC_0_0 = 73, /* internal */ - GAUDI_QUEUE_ID_NIC_0_1 = 74, /* internal */ - GAUDI_QUEUE_ID_NIC_0_2 = 75, /* internal */ - GAUDI_QUEUE_ID_NIC_0_3 = 76, /* internal */ - GAUDI_QUEUE_ID_NIC_1_0 = 77, /* internal */ - GAUDI_QUEUE_ID_NIC_1_1 = 78, /* internal */ - GAUDI_QUEUE_ID_NIC_1_2 = 79, /* internal */ - GAUDI_QUEUE_ID_NIC_1_3 = 80, /* internal */ - GAUDI_QUEUE_ID_NIC_2_0 = 81, /* internal */ - GAUDI_QUEUE_ID_NIC_2_1 = 82, /* internal */ - GAUDI_QUEUE_ID_NIC_2_2 = 83, /* internal */ - GAUDI_QUEUE_ID_NIC_2_3 = 84, /* internal */ - GAUDI_QUEUE_ID_NIC_3_0 = 85, /* internal */ - GAUDI_QUEUE_ID_NIC_3_1 = 86, /* internal */ - GAUDI_QUEUE_ID_NIC_3_2 = 87, /* internal */ - GAUDI_QUEUE_ID_NIC_3_3 = 88, /* internal */ - GAUDI_QUEUE_ID_NIC_4_0 = 89, /* internal */ - GAUDI_QUEUE_ID_NIC_4_1 = 90, /* internal */ - GAUDI_QUEUE_ID_NIC_4_2 = 91, /* internal */ - GAUDI_QUEUE_ID_NIC_4_3 = 92, /* internal */ - GAUDI_QUEUE_ID_NIC_5_0 = 93, /* internal */ - GAUDI_QUEUE_ID_NIC_5_1 = 94, /* internal */ - GAUDI_QUEUE_ID_NIC_5_2 = 95, /* internal */ - GAUDI_QUEUE_ID_NIC_5_3 = 96, /* internal */ - GAUDI_QUEUE_ID_NIC_6_0 = 97, /* internal */ - GAUDI_QUEUE_ID_NIC_6_1 = 98, /* internal */ - GAUDI_QUEUE_ID_NIC_6_2 = 99, /* internal */ - GAUDI_QUEUE_ID_NIC_6_3 = 100, /* internal */ - GAUDI_QUEUE_ID_NIC_7_0 = 101, /* internal */ - GAUDI_QUEUE_ID_NIC_7_1 = 102, /* internal */ - GAUDI_QUEUE_ID_NIC_7_2 = 103, /* internal */ - GAUDI_QUEUE_ID_NIC_7_3 = 104, /* internal */ - GAUDI_QUEUE_ID_NIC_8_0 = 105, /* internal */ - GAUDI_QUEUE_ID_NIC_8_1 = 106, /* internal */ - GAUDI_QUEUE_ID_NIC_8_2 = 107, /* internal */ - GAUDI_QUEUE_ID_NIC_8_3 = 108, /* internal */ - GAUDI_QUEUE_ID_NIC_9_0 = 109, /* internal */ - GAUDI_QUEUE_ID_NIC_9_1 = 110, /* internal */ - GAUDI_QUEUE_ID_NIC_9_2 = 111, /* internal */ - GAUDI_QUEUE_ID_NIC_9_3 = 112, /* internal */ - GAUDI_QUEUE_ID_SIZE -}; - -/* - * Engine Numbering - * - * Used in the "busy_engines_mask" field in `struct hl_info_hw_idle' - */ - -enum goya_engine_id { - GOYA_ENGINE_ID_DMA_0 = 0, - GOYA_ENGINE_ID_DMA_1, - GOYA_ENGINE_ID_DMA_2, - GOYA_ENGINE_ID_DMA_3, - GOYA_ENGINE_ID_DMA_4, - GOYA_ENGINE_ID_MME_0, - GOYA_ENGINE_ID_TPC_0, - GOYA_ENGINE_ID_TPC_1, - GOYA_ENGINE_ID_TPC_2, - GOYA_ENGINE_ID_TPC_3, - GOYA_ENGINE_ID_TPC_4, - GOYA_ENGINE_ID_TPC_5, - GOYA_ENGINE_ID_TPC_6, - GOYA_ENGINE_ID_TPC_7, - GOYA_ENGINE_ID_SIZE -}; - -enum gaudi_engine_id { - GAUDI_ENGINE_ID_DMA_0 = 0, - GAUDI_ENGINE_ID_DMA_1, - GAUDI_ENGINE_ID_DMA_2, - GAUDI_ENGINE_ID_DMA_3, - GAUDI_ENGINE_ID_DMA_4, - GAUDI_ENGINE_ID_DMA_5, - GAUDI_ENGINE_ID_DMA_6, - GAUDI_ENGINE_ID_DMA_7, - GAUDI_ENGINE_ID_MME_0, - GAUDI_ENGINE_ID_MME_1, - GAUDI_ENGINE_ID_MME_2, - GAUDI_ENGINE_ID_MME_3, - GAUDI_ENGINE_ID_TPC_0, - GAUDI_ENGINE_ID_TPC_1, - GAUDI_ENGINE_ID_TPC_2, - GAUDI_ENGINE_ID_TPC_3, - GAUDI_ENGINE_ID_TPC_4, - GAUDI_ENGINE_ID_TPC_5, - GAUDI_ENGINE_ID_TPC_6, - GAUDI_ENGINE_ID_TPC_7, - GAUDI_ENGINE_ID_NIC_0, - GAUDI_ENGINE_ID_NIC_1, - GAUDI_ENGINE_ID_NIC_2, - GAUDI_ENGINE_ID_NIC_3, - GAUDI_ENGINE_ID_NIC_4, - GAUDI_ENGINE_ID_NIC_5, - GAUDI_ENGINE_ID_NIC_6, - GAUDI_ENGINE_ID_NIC_7, - GAUDI_ENGINE_ID_NIC_8, - GAUDI_ENGINE_ID_NIC_9, - GAUDI_ENGINE_ID_SIZE -}; - -enum hl_device_status { - HL_DEVICE_STATUS_OPERATIONAL, - HL_DEVICE_STATUS_IN_RESET, - HL_DEVICE_STATUS_MALFUNCTION -}; - -/* Opcode for management ioctl - * - * HW_IP_INFO - Receive information about different IP blocks in the - * device. - * HL_INFO_HW_EVENTS - Receive an array describing how many times each event - * occurred since the last hard reset. - * HL_INFO_DRAM_USAGE - Retrieve the dram usage inside the device and of the - * specific context. This is relevant only for devices - * where the dram is managed by the kernel driver - * HL_INFO_HW_IDLE - Retrieve information about the idle status of each - * internal engine. - * HL_INFO_DEVICE_STATUS - Retrieve the device's status. This opcode doesn't - * require an open context. - * HL_INFO_DEVICE_UTILIZATION - Retrieve the total utilization of the device - * over the last period specified by the user. - * The period can be between 100ms to 1s, in - * resolution of 100ms. The return value is a - * percentage of the utilization rate. - * HL_INFO_HW_EVENTS_AGGREGATE - Receive an array describing how many times each - * event occurred since the driver was loaded. - * HL_INFO_CLK_RATE - Retrieve the current and maximum clock rate - * of the device in MHz. The maximum clock rate is - * configurable via sysfs parameter - * HL_INFO_RESET_COUNT - Retrieve the counts of the soft and hard reset - * operations performed on the device since the last - * time the driver was loaded. - * HL_INFO_TIME_SYNC - Retrieve the device's time alongside the host's time - * for synchronization. - * HL_INFO_CS_COUNTERS - Retrieve command submission counters - * HL_INFO_PCI_COUNTERS - Retrieve PCI counters - * HL_INFO_CLK_THROTTLE_REASON - Retrieve clock throttling reason - * HL_INFO_SYNC_MANAGER - Retrieve sync manager info per dcore - * HL_INFO_TOTAL_ENERGY - Retrieve total energy consumption - */ -#define HL_INFO_HW_IP_INFO 0 -#define HL_INFO_HW_EVENTS 1 -#define HL_INFO_DRAM_USAGE 2 -#define HL_INFO_HW_IDLE 3 -#define HL_INFO_DEVICE_STATUS 4 -#define HL_INFO_DEVICE_UTILIZATION 6 -#define HL_INFO_HW_EVENTS_AGGREGATE 7 -#define HL_INFO_CLK_RATE 8 -#define HL_INFO_RESET_COUNT 9 -#define HL_INFO_TIME_SYNC 10 -#define HL_INFO_CS_COUNTERS 11 -#define HL_INFO_PCI_COUNTERS 12 -#define HL_INFO_CLK_THROTTLE_REASON 13 -#define HL_INFO_SYNC_MANAGER 14 -#define HL_INFO_TOTAL_ENERGY 15 - -#define HL_INFO_VERSION_MAX_LEN 128 -#define HL_INFO_CARD_NAME_MAX_LEN 16 - -struct hl_info_hw_ip_info { - __u64 sram_base_address; - __u64 dram_base_address; - __u64 dram_size; - __u32 sram_size; - __u32 num_of_events; - __u32 device_id; /* PCI Device ID */ - __u32 module_id; /* For mezzanine cards in servers (From OCP spec.) */ - __u32 reserved[2]; - __u32 cpld_version; - __u32 psoc_pci_pll_nr; - __u32 psoc_pci_pll_nf; - __u32 psoc_pci_pll_od; - __u32 psoc_pci_pll_div_factor; - __u8 tpc_enabled_mask; - __u8 dram_enabled; - __u8 pad[2]; - __u8 cpucp_version[HL_INFO_VERSION_MAX_LEN]; - __u8 card_name[HL_INFO_CARD_NAME_MAX_LEN]; -}; - -struct hl_info_dram_usage { - __u64 dram_free_mem; - __u64 ctx_dram_mem; -}; - -struct hl_info_hw_idle { - __u32 is_idle; - /* - * Bitmask of busy engines. - * Bits definition is according to `enum _enging_id'. - */ - __u32 busy_engines_mask; - - /* - * Extended Bitmask of busy engines. - * Bits definition is according to `enum _enging_id'. - */ - __u64 busy_engines_mask_ext; -}; - -struct hl_info_device_status { - __u32 status; - __u32 pad; -}; - -struct hl_info_device_utilization { - __u32 utilization; - __u32 pad; -}; - -struct hl_info_clk_rate { - __u32 cur_clk_rate_mhz; - __u32 max_clk_rate_mhz; -}; - -struct hl_info_reset_count { - __u32 hard_reset_cnt; - __u32 soft_reset_cnt; -}; - -struct hl_info_time_sync { - __u64 device_time; - __u64 host_time; -}; - -/** - * struct hl_info_pci_counters - pci counters - * @rx_throughput: PCI rx throughput KBps - * @tx_throughput: PCI tx throughput KBps - * @replay_cnt: PCI replay counter - */ -struct hl_info_pci_counters { - __u64 rx_throughput; - __u64 tx_throughput; - __u64 replay_cnt; -}; - -#define HL_CLK_THROTTLE_POWER 0x1 -#define HL_CLK_THROTTLE_THERMAL 0x2 - -/** - * struct hl_info_clk_throttle - clock throttling reason - * @clk_throttling_reason: each bit represents a clk throttling reason - */ -struct hl_info_clk_throttle { - __u32 clk_throttling_reason; -}; - -/** - * struct hl_info_energy - device energy information - * @total_energy_consumption: total device energy consumption - */ -struct hl_info_energy { - __u64 total_energy_consumption; -}; - -/** - * struct hl_info_sync_manager - sync manager information - * @first_available_sync_object: first available sob - * @first_available_monitor: first available monitor - */ -struct hl_info_sync_manager { - __u32 first_available_sync_object; - __u32 first_available_monitor; -}; - -/** - * struct hl_info_cs_counters - command submission counters - * @out_of_mem_drop_cnt: dropped due to memory allocation issue - * @parsing_drop_cnt: dropped due to error in packet parsing - * @queue_full_drop_cnt: dropped due to queue full - * @device_in_reset_drop_cnt: dropped due to device in reset - * @max_cs_in_flight_drop_cnt: dropped due to maximum CS in-flight - */ -struct hl_cs_counters { - __u64 out_of_mem_drop_cnt; - __u64 parsing_drop_cnt; - __u64 queue_full_drop_cnt; - __u64 device_in_reset_drop_cnt; - __u64 max_cs_in_flight_drop_cnt; -}; - -struct hl_info_cs_counters { - struct hl_cs_counters cs_counters; - struct hl_cs_counters ctx_cs_counters; -}; - -enum gaudi_dcores { - HL_GAUDI_WS_DCORE, - HL_GAUDI_WN_DCORE, - HL_GAUDI_EN_DCORE, - HL_GAUDI_ES_DCORE -}; - -struct hl_info_args { - /* Location of relevant struct in userspace */ - __u64 return_pointer; - /* - * The size of the return value. Just like "size" in "snprintf", - * it limits how many bytes the kernel can write - * - * For hw_events array, the size should be - * hl_info_hw_ip_info.num_of_events * sizeof(__u32) - */ - __u32 return_size; - - /* HL_INFO_* */ - __u32 op; - - union { - /* Dcore id for which the information is relevant. - * For Gaudi refer to 'enum gaudi_dcores' - */ - __u32 dcore_id; - /* Context ID - Currently not in use */ - __u32 ctx_id; - /* Period value for utilization rate (100ms - 1000ms, in 100ms - * resolution. - */ - __u32 period_ms; - }; - - __u32 pad; -}; - -/* Opcode to create a new command buffer */ -#define HL_CB_OP_CREATE 0 -/* Opcode to destroy previously created command buffer */ -#define HL_CB_OP_DESTROY 1 - -/* 2MB minus 32 bytes for 2xMSG_PROT */ -#define HL_MAX_CB_SIZE (0x200000 - 32) - -/* Indicates whether the command buffer should be mapped to the device's MMU */ -#define HL_CB_FLAGS_MAP 0x1 - -struct hl_cb_in { - /* Handle of CB or 0 if we want to create one */ - __u64 cb_handle; - /* HL_CB_OP_* */ - __u32 op; - /* Size of CB. Maximum size is HL_MAX_CB_SIZE. The minimum size that - * will be allocated, regardless of this parameter's value, is PAGE_SIZE - */ - __u32 cb_size; - /* Context ID - Currently not in use */ - __u32 ctx_id; - /* HL_CB_FLAGS_* */ - __u32 flags; -}; - -struct hl_cb_out { - /* Handle of CB */ - __u64 cb_handle; -}; - -union hl_cb_args { - struct hl_cb_in in; - struct hl_cb_out out; -}; - -/* - * This structure size must always be fixed to 64-bytes for backward - * compatibility - */ -struct hl_cs_chunk { - union { - /* For external queue, this represents a Handle of CB on the - * Host. - * For internal queue in Goya, this represents an SRAM or - * a DRAM address of the internal CB. In Gaudi, this might also - * represent a mapped host address of the CB. - * - * A mapped host address is in the device address space, after - * a host address was mapped by the device MMU. - */ - __u64 cb_handle; - - /* Relevant only when HL_CS_FLAGS_WAIT is set. - * This holds address of array of u64 values that contain - * signal CS sequence numbers. The wait described by this job - * will listen on all those signals (wait event per signal) - */ - __u64 signal_seq_arr; - }; - - /* Index of queue to put the CB on */ - __u32 queue_index; - - union { - /* - * Size of command buffer with valid packets - * Can be smaller then actual CB size - */ - __u32 cb_size; - - /* Relevant only when HL_CS_FLAGS_WAIT is set. - * Number of entries in signal_seq_arr - */ - __u32 num_signal_seq_arr; - }; - - /* HL_CS_CHUNK_FLAGS_* */ - __u32 cs_chunk_flags; - - /* Align structure to 64 bytes */ - __u32 pad[11]; -}; - -/* SIGNAL and WAIT flags are mutually exclusive */ -#define HL_CS_FLAGS_FORCE_RESTORE 0x1 -#define HL_CS_FLAGS_SIGNAL 0x2 -#define HL_CS_FLAGS_WAIT 0x4 - -#define HL_CS_STATUS_SUCCESS 0 - -#define HL_MAX_JOBS_PER_CS 512 - -struct hl_cs_in { - - /* this holds address of array of hl_cs_chunk for restore phase */ - __u64 chunks_restore; - - /* holds address of array of hl_cs_chunk for execution phase */ - __u64 chunks_execute; - - /* this holds address of array of hl_cs_chunk for store phase - - * Currently not in use - */ - __u64 chunks_store; - - /* Number of chunks in restore phase array. Maximum number is - * HL_MAX_JOBS_PER_CS - */ - __u32 num_chunks_restore; - - /* Number of chunks in execution array. Maximum number is - * HL_MAX_JOBS_PER_CS - */ - __u32 num_chunks_execute; - - /* Number of chunks in restore phase array - Currently not in use */ - __u32 num_chunks_store; - - /* HL_CS_FLAGS_* */ - __u32 cs_flags; - - /* Context ID - Currently not in use */ - __u32 ctx_id; -}; - -struct hl_cs_out { - /* - * seq holds the sequence number of the CS to pass to wait ioctl. All - * values are valid except for 0 and ULLONG_MAX - */ - __u64 seq; - /* HL_CS_STATUS_* */ - __u32 status; - __u32 pad; -}; - -union hl_cs_args { - struct hl_cs_in in; - struct hl_cs_out out; -}; - -struct hl_wait_cs_in { - /* Command submission sequence number */ - __u64 seq; - /* Absolute timeout to wait in microseconds */ - __u64 timeout_us; - /* Context ID - Currently not in use */ - __u32 ctx_id; - __u32 pad; -}; - -#define HL_WAIT_CS_STATUS_COMPLETED 0 -#define HL_WAIT_CS_STATUS_BUSY 1 -#define HL_WAIT_CS_STATUS_TIMEDOUT 2 -#define HL_WAIT_CS_STATUS_ABORTED 3 -#define HL_WAIT_CS_STATUS_INTERRUPTED 4 - -struct hl_wait_cs_out { - /* HL_WAIT_CS_STATUS_* */ - __u32 status; - __u32 pad; -}; - -union hl_wait_cs_args { - struct hl_wait_cs_in in; - struct hl_wait_cs_out out; -}; - -/* Opcode to allocate device memory */ -#define HL_MEM_OP_ALLOC 0 -/* Opcode to free previously allocated device memory */ -#define HL_MEM_OP_FREE 1 -/* Opcode to map host and device memory */ -#define HL_MEM_OP_MAP 2 -/* Opcode to unmap previously mapped host and device memory */ -#define HL_MEM_OP_UNMAP 3 - -/* Memory flags */ -#define HL_MEM_CONTIGUOUS 0x1 -#define HL_MEM_SHARED 0x2 -#define HL_MEM_USERPTR 0x4 - -struct hl_mem_in { - union { - /* HL_MEM_OP_ALLOC- allocate device memory */ - struct { - /* Size to alloc */ - __u64 mem_size; - } alloc; - - /* HL_MEM_OP_FREE - free device memory */ - struct { - /* Handle returned from HL_MEM_OP_ALLOC */ - __u64 handle; - } free; - - /* HL_MEM_OP_MAP - map device memory */ - struct { - /* - * Requested virtual address of mapped memory. - * The driver will try to map the requested region to - * this hint address, as long as the address is valid - * and not already mapped. The user should check the - * returned address of the IOCTL to make sure he got - * the hint address. Passing 0 here means that the - * driver will choose the address itself. - */ - __u64 hint_addr; - /* Handle returned from HL_MEM_OP_ALLOC */ - __u64 handle; - } map_device; - - /* HL_MEM_OP_MAP - map host memory */ - struct { - /* Address of allocated host memory */ - __u64 host_virt_addr; - /* - * Requested virtual address of mapped memory. - * The driver will try to map the requested region to - * this hint address, as long as the address is valid - * and not already mapped. The user should check the - * returned address of the IOCTL to make sure he got - * the hint address. Passing 0 here means that the - * driver will choose the address itself. - */ - __u64 hint_addr; - /* Size of allocated host memory */ - __u64 mem_size; - } map_host; - - /* HL_MEM_OP_UNMAP - unmap host memory */ - struct { - /* Virtual address returned from HL_MEM_OP_MAP */ - __u64 device_virt_addr; - } unmap; - }; - - /* HL_MEM_OP_* */ - __u32 op; - /* HL_MEM_* flags */ - __u32 flags; - /* Context ID - Currently not in use */ - __u32 ctx_id; - __u32 pad; -}; - -struct hl_mem_out { - union { - /* - * Used for HL_MEM_OP_MAP as the virtual address that was - * assigned in the device VA space. - * A value of 0 means the requested operation failed. - */ - __u64 device_virt_addr; - - /* - * Used for HL_MEM_OP_ALLOC. This is the assigned - * handle for the allocated memory - */ - __u64 handle; - }; -}; - -union hl_mem_args { - struct hl_mem_in in; - struct hl_mem_out out; -}; - -#define HL_DEBUG_MAX_AUX_VALUES 10 - -struct hl_debug_params_etr { - /* Address in memory to allocate buffer */ - __u64 buffer_address; - - /* Size of buffer to allocate */ - __u64 buffer_size; - - /* Sink operation mode: SW fifo, HW fifo, Circular buffer */ - __u32 sink_mode; - __u32 pad; -}; - -struct hl_debug_params_etf { - /* Address in memory to allocate buffer */ - __u64 buffer_address; - - /* Size of buffer to allocate */ - __u64 buffer_size; - - /* Sink operation mode: SW fifo, HW fifo, Circular buffer */ - __u32 sink_mode; - __u32 pad; -}; - -struct hl_debug_params_stm { - /* Two bit masks for HW event and Stimulus Port */ - __u64 he_mask; - __u64 sp_mask; - - /* Trace source ID */ - __u32 id; - - /* Frequency for the timestamp register */ - __u32 frequency; -}; - -struct hl_debug_params_bmon { - /* Two address ranges that the user can request to filter */ - __u64 start_addr0; - __u64 addr_mask0; - - __u64 start_addr1; - __u64 addr_mask1; - - /* Capture window configuration */ - __u32 bw_win; - __u32 win_capture; - - /* Trace source ID */ - __u32 id; - __u32 pad; -}; - -struct hl_debug_params_spmu { - /* Event types selection */ - __u64 event_types[HL_DEBUG_MAX_AUX_VALUES]; - - /* Number of event types selection */ - __u32 event_types_num; - __u32 pad; -}; - -/* Opcode for ETR component */ -#define HL_DEBUG_OP_ETR 0 -/* Opcode for ETF component */ -#define HL_DEBUG_OP_ETF 1 -/* Opcode for STM component */ -#define HL_DEBUG_OP_STM 2 -/* Opcode for FUNNEL component */ -#define HL_DEBUG_OP_FUNNEL 3 -/* Opcode for BMON component */ -#define HL_DEBUG_OP_BMON 4 -/* Opcode for SPMU component */ -#define HL_DEBUG_OP_SPMU 5 -/* Opcode for timestamp (deprecated) */ -#define HL_DEBUG_OP_TIMESTAMP 6 -/* Opcode for setting the device into or out of debug mode. The enable - * variable should be 1 for enabling debug mode and 0 for disabling it - */ -#define HL_DEBUG_OP_SET_MODE 7 - -struct hl_debug_args { - /* - * Pointer to user input structure. - * This field is relevant to specific opcodes. - */ - __u64 input_ptr; - /* Pointer to user output structure */ - __u64 output_ptr; - /* Size of user input structure */ - __u32 input_size; - /* Size of user output structure */ - __u32 output_size; - /* HL_DEBUG_OP_* */ - __u32 op; - /* - * Register index in the component, taken from the debug_regs_index enum - * in the various ASIC header files - */ - __u32 reg_idx; - /* Enable/disable */ - __u32 enable; - /* Context ID - Currently not in use */ - __u32 ctx_id; -}; - -/* - * Various information operations such as: - * - H/W IP information - * - Current dram usage - * - * The user calls this IOCTL with an opcode that describes the required - * information. The user should supply a pointer to a user-allocated memory - * chunk, which will be filled by the driver with the requested information. - * - * The user supplies the maximum amount of size to copy into the user's memory, - * in order to prevent data corruption in case of differences between the - * definitions of structures in kernel and userspace, e.g. in case of old - * userspace and new kernel driver - */ -#define HL_IOCTL_INFO \ - _IOWR('H', 0x01, struct hl_info_args) - -/* - * Command Buffer - * - Request a Command Buffer - * - Destroy a Command Buffer - * - * The command buffers are memory blocks that reside in DMA-able address - * space and are physically contiguous so they can be accessed by the device - * directly. They are allocated using the coherent DMA API. - * - * When creating a new CB, the IOCTL returns a handle of it, and the user-space - * process needs to use that handle to mmap the buffer so it can access them. - * - * In some instances, the device must access the command buffer through the - * device's MMU, and thus its memory should be mapped. In these cases, user can - * indicate the driver that such a mapping is required. - * The resulting device virtual address will be used internally by the driver, - * and won't be returned to user. - * - */ -#define HL_IOCTL_CB \ - _IOWR('H', 0x02, union hl_cb_args) - -/* - * Command Submission - * - * To submit work to the device, the user need to call this IOCTL with a set - * of JOBS. That set of JOBS constitutes a CS object. - * Each JOB will be enqueued on a specific queue, according to the user's input. - * There can be more then one JOB per queue. - * - * The CS IOCTL will receive three sets of JOBS. One set is for "restore" phase, - * a second set is for "execution" phase and a third set is for "store" phase. - * The JOBS on the "restore" phase are enqueued only after context-switch - * (or if its the first CS for this context). The user can also order the - * driver to run the "restore" phase explicitly - * - * There are two types of queues - external and internal. External queues - * are DMA queues which transfer data from/to the Host. All other queues are - * internal. The driver will get completion notifications from the device only - * on JOBS which are enqueued in the external queues. - * - * For jobs on external queues, the user needs to create command buffers - * through the CB ioctl and give the CB's handle to the CS ioctl. For jobs on - * internal queues, the user needs to prepare a "command buffer" with packets - * on either the device SRAM/DRAM or the host, and give the device address of - * that buffer to the CS ioctl. - * - * This IOCTL is asynchronous in regard to the actual execution of the CS. This - * means it returns immediately after ALL the JOBS were enqueued on their - * relevant queues. Therefore, the user mustn't assume the CS has been completed - * or has even started to execute. - * - * Upon successful enqueue, the IOCTL returns a sequence number which the user - * can use with the "Wait for CS" IOCTL to check whether the handle's CS - * external JOBS have been completed. Note that if the CS has internal JOBS - * which can execute AFTER the external JOBS have finished, the driver might - * report that the CS has finished executing BEFORE the internal JOBS have - * actually finished executing. - * - * Even though the sequence number increments per CS, the user can NOT - * automatically assume that if CS with sequence number N finished, then CS - * with sequence number N-1 also finished. The user can make this assumption if - * and only if CS N and CS N-1 are exactly the same (same CBs for the same - * queues). - */ -#define HL_IOCTL_CS \ - _IOWR('H', 0x03, union hl_cs_args) - -/* - * Wait for Command Submission - * - * The user can call this IOCTL with a handle it received from the CS IOCTL - * to wait until the handle's CS has finished executing. The user will wait - * inside the kernel until the CS has finished or until the user-requested - * timeout has expired. - * - * If the timeout value is 0, the driver won't sleep at all. It will check - * the status of the CS and return immediately - * - * The return value of the IOCTL is a standard Linux error code. The possible - * values are: - * - * EINTR - Kernel waiting has been interrupted, e.g. due to OS signal - * that the user process received - * ETIMEDOUT - The CS has caused a timeout on the device - * EIO - The CS was aborted (usually because the device was reset) - * ENODEV - The device wants to do hard-reset (so user need to close FD) - * - * The driver also returns a custom define inside the IOCTL which can be: - * - * HL_WAIT_CS_STATUS_COMPLETED - The CS has been completed successfully (0) - * HL_WAIT_CS_STATUS_BUSY - The CS is still executing (0) - * HL_WAIT_CS_STATUS_TIMEDOUT - The CS has caused a timeout on the device - * (ETIMEDOUT) - * HL_WAIT_CS_STATUS_ABORTED - The CS was aborted, usually because the - * device was reset (EIO) - * HL_WAIT_CS_STATUS_INTERRUPTED - Waiting for the CS was interrupted (EINTR) - * - */ - -#define HL_IOCTL_WAIT_CS \ - _IOWR('H', 0x04, union hl_wait_cs_args) - -/* - * Memory - * - Map host memory to device MMU - * - Unmap host memory from device MMU - * - * This IOCTL allows the user to map host memory to the device MMU - * - * For host memory, the IOCTL doesn't allocate memory. The user is supposed - * to allocate the memory in user-space (malloc/new). The driver pins the - * physical pages (up to the allowed limit by the OS), assigns a virtual - * address in the device VA space and initializes the device MMU. - * - * There is an option for the user to specify the requested virtual address. - * - */ -#define HL_IOCTL_MEMORY \ - _IOWR('H', 0x05, union hl_mem_args) - -/* - * Debug - * - Enable/disable the ETR/ETF/FUNNEL/STM/BMON/SPMU debug traces - * - * This IOCTL allows the user to get debug traces from the chip. - * - * Before the user can send configuration requests of the various - * debug/profile engines, it needs to set the device into debug mode. - * This is because the debug/profile infrastructure is shared component in the - * device and we can't allow multiple users to access it at the same time. - * - * Once a user set the device into debug mode, the driver won't allow other - * users to "work" with the device, i.e. open a FD. If there are multiple users - * opened on the device, the driver won't allow any user to debug the device. - * - * For each configuration request, the user needs to provide the register index - * and essential data such as buffer address and size. - * - * Once the user has finished using the debug/profile engines, he should - * set the device into non-debug mode, i.e. disable debug mode. - * - * The driver can decide to "kick out" the user if he abuses this interface. - * - */ -#define HL_IOCTL_DEBUG \ - _IOWR('H', 0x06, struct hl_debug_args) - -#define HL_COMMAND_START 0x01 -#define HL_COMMAND_END 0x07 - -#endif /* HABANALABS_H_ */ diff --git a/linux-headers/include/misc/uacce/hisi_qm.h b/linux-headers/include/misc/uacce/hisi_qm.h index 82f500973e9..4e740c73b24 100644 --- a/linux-headers/include/misc/uacce/hisi_qm.h +++ b/linux-headers/include/misc/uacce/hisi_qm.h @@ -14,10 +14,26 @@ struct hisi_qp_ctx { __u16 qc_type; }; +/** + * struct hisi_qp_info - User data for hisi qp. + * @sqe_size: Submission queue element size + * @sq_depth: The number of sqe + * @cq_depth: The number of cqe + * @reserved: Reserved data + */ +struct hisi_qp_info { + __u32 sqe_size; + __u16 sq_depth; + __u16 cq_depth; + __u64 reserved; +}; + #define HISI_QM_API_VER_BASE "hisi_qm_v1" #define HISI_QM_API_VER2_BASE "hisi_qm_v2" +#define HISI_QM_API_VER3_BASE "hisi_qm_v3" /* UACCE_CMD_QM_SET_QP_CTX: Set qp algorithm type */ #define UACCE_CMD_QM_SET_QP_CTX _IOWR('H', 10, struct hisi_qp_ctx) - +/* UACCE_CMD_QM_SET_QP_INFO: Set qp depth and BD size */ +#define UACCE_CMD_QM_SET_QP_INFO _IOWR('H', 11, struct hisi_qp_info) #endif diff --git a/linux-headers/include/mtd/mtd-abi.h b/linux-headers/include/mtd/mtd-abi.h index e90ad91d223..9529cc6192d 100644 --- a/linux-headers/include/mtd/mtd-abi.h +++ b/linux-headers/include/mtd/mtd-abi.h @@ -55,9 +55,9 @@ struct mtd_oob_buf64 { * @MTD_OPS_RAW: data are transferred as-is, with no error correction; * this mode implies %MTD_OPS_PLACE_OOB * - * These modes can be passed to ioctl(MEMWRITE) and are also used internally. - * See notes on "MTD file modes" for discussion on %MTD_OPS_RAW vs. - * %MTD_FILE_MODE_RAW. + * These modes can be passed to ioctl(MEMWRITE) and ioctl(MEMREAD); they are + * also used internally. See notes on "MTD file modes" for discussion on + * %MTD_OPS_RAW vs. %MTD_FILE_MODE_RAW. */ enum { MTD_OPS_PLACE_OOB = 0, @@ -69,8 +69,8 @@ enum { * struct mtd_write_req - data structure for requesting a write operation * * @start: start address - * @len: length of data buffer - * @ooblen: length of OOB buffer + * @len: length of data buffer (only lower 32 bits are used) + * @ooblen: length of OOB buffer (only lower 32 bits are used) * @usr_data: user-provided data buffer * @usr_oob: user-provided OOB buffer * @mode: MTD mode (see "MTD operation modes") @@ -91,6 +91,53 @@ struct mtd_write_req { __u8 padding[7]; }; +/** + * struct mtd_read_req_ecc_stats - ECC statistics for a read operation + * + * @uncorrectable_errors: the number of uncorrectable errors that happened + * during the read operation + * @corrected_bitflips: the number of bitflips corrected during the read + * operation + * @max_bitflips: the maximum number of bitflips detected in any single ECC + * step for the data read during the operation; this information + * can be used to decide whether the data stored in a specific + * region of the MTD device should be moved somewhere else to + * avoid data loss. + */ +struct mtd_read_req_ecc_stats { + __u32 uncorrectable_errors; + __u32 corrected_bitflips; + __u32 max_bitflips; +}; + +/** + * struct mtd_read_req - data structure for requesting a read operation + * + * @start: start address + * @len: length of data buffer (only lower 32 bits are used) + * @ooblen: length of OOB buffer (only lower 32 bits are used) + * @usr_data: user-provided data buffer + * @usr_oob: user-provided OOB buffer + * @mode: MTD mode (see "MTD operation modes") + * @padding: reserved, must be set to 0 + * @ecc_stats: ECC statistics for the read operation + * + * This structure supports ioctl(MEMREAD) operations, allowing data and/or OOB + * reads in various modes. To read from OOB-only, set @usr_data == NULL, and to + * read data-only, set @usr_oob == NULL. However, setting both @usr_data and + * @usr_oob to NULL is not allowed. + */ +struct mtd_read_req { + __u64 start; + __u64 len; + __u64 ooblen; + __u64 usr_data; + __u64 usr_oob; + __u8 mode; + __u8 padding[7]; + struct mtd_read_req_ecc_stats ecc_stats; +}; + #define MTD_ABSENT 0 #define MTD_RAM 1 #define MTD_ROM 2 @@ -205,6 +252,14 @@ struct otp_info { * without OOB, e.g., NOR flash. */ #define MEMWRITE _IOWR('M', 24, struct mtd_write_req) +/* Erase a given range of user data (must be in mode %MTD_FILE_MODE_OTP_USER) */ +#define OTPERASE _IOW('M', 25, struct otp_info) +/* + * Most generic read interface; can read in-band and/or out-of-band in various + * modes (see "struct mtd_read_req"). This ioctl is not supported for flashes + * without OOB, e.g., NOR flash. + */ +#define MEMREAD _IOWR('M', 26, struct mtd_read_req) /* * Obsolete legacy interface. Keep it in order not to break userspace @@ -268,8 +323,9 @@ struct mtd_ecc_stats { * Note: %MTD_FILE_MODE_RAW provides the same functionality as %MTD_OPS_RAW - * raw access to the flash, without error correction or autoplacement schemes. * Wherever possible, the MTD_OPS_* mode will override the MTD_FILE_MODE_* mode - * (e.g., when using ioctl(MEMWRITE)), but in some cases, the MTD_FILE_MODE is - * used out of necessity (e.g., `write()', ioctl(MEMWRITEOOB64)). + * (e.g., when using ioctl(MEMWRITE) or ioctl(MEMREAD)), but in some cases, the + * MTD_FILE_MODE is used out of necessity (e.g., `write()', + * ioctl(MEMWRITEOOB64)). */ enum mtd_file_modes { MTD_FILE_MODE_NORMAL = MTD_OTP_OFF, diff --git a/linux-headers/include/mtd/ubi-user.h b/linux-headers/include/mtd/ubi-user.h index c5bbda1be80..bd949ff4d86 100644 --- a/linux-headers/include/mtd/ubi-user.h +++ b/linux-headers/include/mtd/ubi-user.h @@ -247,6 +247,7 @@ enum { * @vid_hdr_offset: VID header offset (use defaults if %0) * @max_beb_per1024: maximum expected number of bad PEB per 1024 PEBs * @padding: reserved for future, not used, has to be zeroed + * @disable_fm: whether disable fastmap * * This data structure is used to specify MTD device UBI has to attach and the * parameters it has to use. The number which should be assigned to the new UBI @@ -281,13 +282,18 @@ enum { * eraseblocks for new bad eraseblocks, but attempts to use available * eraseblocks (if any). The accepted range is 0-768. If 0 is given, the * default kernel value of %CONFIG_MTD_UBI_BEB_LIMIT will be used. + * + * If @disable_fm is not zero, ubi doesn't create new fastmap even the module + * param 'fm_autoconvert' is set, and existed old fastmap will be destroyed + * after doing full scanning. */ struct ubi_attach_req { __s32 ubi_num; __s32 mtd_num; __s32 vid_hdr_offset; __s16 max_beb_per1024; - __s8 padding[10]; + __s8 disable_fm; + __s8 padding[9]; }; /* diff --git a/linux-headers/include/rdma/bnxt_re-abi.h b/linux-headers/include/rdma/bnxt_re-abi.h index dc52e3cf574..6e7c67a0cca 100644 --- a/linux-headers/include/rdma/bnxt_re-abi.h +++ b/linux-headers/include/rdma/bnxt_re-abi.h @@ -41,6 +41,7 @@ #define __BNXT_RE_UVERBS_ABI_H__ #include +#include #define BNXT_RE_ABI_VERSION 1 @@ -49,7 +50,16 @@ #define BNXT_RE_CHIP_ID0_CHIP_MET_SFT 0x18 enum { - BNXT_RE_UCNTX_CMASK_HAVE_CCTX = 0x1ULL + BNXT_RE_UCNTX_CMASK_HAVE_CCTX = 0x1ULL, + BNXT_RE_UCNTX_CMASK_HAVE_MODE = 0x02ULL, + BNXT_RE_UCNTX_CMASK_WC_DPI_ENABLED = 0x04ULL, + BNXT_RE_UCNTX_CMASK_DBR_PACING_ENABLED = 0x08ULL, +}; + +enum bnxt_re_wqe_mode { + BNXT_QPLIB_WQE_MODE_STATIC = 0x00, + BNXT_QPLIB_WQE_MODE_VARIABLE = 0x01, + BNXT_QPLIB_WQE_MODE_INVALID = 0x02, }; struct bnxt_re_uctx_resp { @@ -62,6 +72,8 @@ struct bnxt_re_uctx_resp { __aligned_u64 comp_mask; __u32 chip_id0; __u32 chip_id1; + __u32 mode; + __u32 rsvd1; /* padding */ }; /* @@ -87,6 +99,10 @@ struct bnxt_re_cq_resp { __u32 rsvd; }; +struct bnxt_re_resize_cq_req { + __aligned_u64 cq_va; +}; + struct bnxt_re_qp_req { __aligned_u64 qpsva; __aligned_u64 qprva; @@ -114,4 +130,35 @@ enum bnxt_re_shpg_offt { BNXT_RE_END_RESV_OFFT = 0xFF0 }; +enum bnxt_re_objects { + BNXT_RE_OBJECT_ALLOC_PAGE = (1U << UVERBS_ID_NS_SHIFT), + BNXT_RE_OBJECT_NOTIFY_DRV, +}; + +enum bnxt_re_alloc_page_type { + BNXT_RE_ALLOC_WC_PAGE = 0, + BNXT_RE_ALLOC_DBR_BAR_PAGE, + BNXT_RE_ALLOC_DBR_PAGE, +}; + +enum bnxt_re_var_alloc_page_attrs { + BNXT_RE_ALLOC_PAGE_HANDLE = (1U << UVERBS_ID_NS_SHIFT), + BNXT_RE_ALLOC_PAGE_TYPE, + BNXT_RE_ALLOC_PAGE_DPI, + BNXT_RE_ALLOC_PAGE_MMAP_OFFSET, + BNXT_RE_ALLOC_PAGE_MMAP_LENGTH, +}; + +enum bnxt_re_alloc_page_attrs { + BNXT_RE_DESTROY_PAGE_HANDLE = (1U << UVERBS_ID_NS_SHIFT), +}; + +enum bnxt_re_alloc_page_methods { + BNXT_RE_METHOD_ALLOC_PAGE = (1U << UVERBS_ID_NS_SHIFT), + BNXT_RE_METHOD_DESTROY_PAGE, +}; + +enum bnxt_re_notify_drv_methods { + BNXT_RE_METHOD_NOTIFY_DRV = (1U << UVERBS_ID_NS_SHIFT), +}; #endif /* __BNXT_RE_UVERBS_ABI_H__*/ diff --git a/linux-headers/include/rdma/efa-abi.h b/linux-headers/include/rdma/efa-abi.h index f89fbb5b1e8..d94c32f2880 100644 --- a/linux-headers/include/rdma/efa-abi.h +++ b/linux-headers/include/rdma/efa-abi.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) */ /* - * Copyright 2018-2020 Amazon.com, Inc. or its affiliates. All rights reserved. + * Copyright 2018-2023 Amazon.com, Inc. or its affiliates. All rights reserved. */ #ifndef EFA_ABI_USER_H @@ -52,11 +52,21 @@ struct efa_ibv_alloc_pd_resp { __u8 reserved_30[2]; }; +enum { + EFA_CREATE_CQ_WITH_COMPLETION_CHANNEL = 1 << 0, + EFA_CREATE_CQ_WITH_SGID = 1 << 1, +}; + struct efa_ibv_create_cq { __u32 comp_mask; __u32 cq_entry_size; __u16 num_sub_cqs; - __u8 reserved_50[6]; + __u8 flags; + __u8 reserved_58[5]; +}; + +enum { + EFA_CREATE_CQ_RESP_DB_OFF = 1 << 0, }; struct efa_ibv_create_cq_resp { @@ -65,7 +75,9 @@ struct efa_ibv_create_cq_resp { __aligned_u64 q_mmap_key; __aligned_u64 q_mmap_size; __u16 cq_idx; - __u8 reserved_d0[6]; + __u8 reserved_d0[2]; + __u32 db_off; + __aligned_u64 db_mmap_key; }; enum { @@ -106,6 +118,10 @@ struct efa_ibv_create_ah_resp { enum { EFA_QUERY_DEVICE_CAPS_RDMA_READ = 1 << 0, EFA_QUERY_DEVICE_CAPS_RNR_RETRY = 1 << 1, + EFA_QUERY_DEVICE_CAPS_CQ_NOTIFICATIONS = 1 << 2, + EFA_QUERY_DEVICE_CAPS_CQ_WITH_SGID = 1 << 3, + EFA_QUERY_DEVICE_CAPS_DATA_POLLING_128 = 1 << 4, + EFA_QUERY_DEVICE_CAPS_RDMA_WRITE = 1 << 5, }; struct efa_ibv_ex_query_device_resp { diff --git a/linux-headers/include/rdma/erdma-abi.h b/linux-headers/include/rdma/erdma-abi.h new file mode 100644 index 00000000000..b7a0222f978 --- /dev/null +++ b/linux-headers/include/rdma/erdma-abi.h @@ -0,0 +1,49 @@ +/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */ +/* + * Copyright (c) 2020-2022, Alibaba Group. + */ + +#ifndef __ERDMA_USER_H__ +#define __ERDMA_USER_H__ + +#include + +#define ERDMA_ABI_VERSION 1 + +struct erdma_ureq_create_cq { + __aligned_u64 db_record_va; + __aligned_u64 qbuf_va; + __u32 qbuf_len; + __u32 rsvd0; +}; + +struct erdma_uresp_create_cq { + __u32 cq_id; + __u32 num_cqe; +}; + +struct erdma_ureq_create_qp { + __aligned_u64 db_record_va; + __aligned_u64 qbuf_va; + __u32 qbuf_len; + __u32 rsvd0; +}; + +struct erdma_uresp_create_qp { + __u32 qp_id; + __u32 num_sqe; + __u32 num_rqe; + __u32 rq_offset; +}; + +struct erdma_uresp_alloc_ctx { + __u32 dev_id; + __u32 pad; + __u32 sdb_type; + __u32 sdb_offset; + __aligned_u64 sdb; + __aligned_u64 rdb; + __aligned_u64 cdb; +}; + +#endif diff --git a/linux-headers/include/rdma/hfi/hfi1_user.h b/linux-headers/include/rdma/hfi/hfi1_user.h index d95ef9a2b03..1106a7c90b2 100644 --- a/linux-headers/include/rdma/hfi/hfi1_user.h +++ b/linux-headers/include/rdma/hfi/hfi1_user.h @@ -180,7 +180,7 @@ struct hfi1_sdma_comp_entry { struct hfi1_status { __aligned_u64 dev; /* device/hw status bits */ __aligned_u64 port; /* port state and status bits */ - char freezemsg[0]; + char freezemsg[]; }; enum sdma_req_opcode { diff --git a/linux-headers/include/rdma/hns-abi.h b/linux-headers/include/rdma/hns-abi.h index 9ec85f76e9a..2e68a8b0c92 100644 --- a/linux-headers/include/rdma/hns-abi.h +++ b/linux-headers/include/rdma/hns-abi.h @@ -43,6 +43,10 @@ struct hns_roce_ib_create_cq { __u32 reserved; }; +enum hns_roce_cq_cap_flags { + HNS_ROCE_CQ_FLAG_RECORD_DB = 1 << 0, +}; + struct hns_roce_ib_create_cq_resp { __aligned_u64 cqn; /* Only 32 bits used, 64 for compat */ __aligned_u64 cap_flags; @@ -69,13 +73,42 @@ struct hns_roce_ib_create_qp { __aligned_u64 sdb_addr; }; +enum hns_roce_qp_cap_flags { + HNS_ROCE_QP_CAP_RQ_RECORD_DB = 1 << 0, + HNS_ROCE_QP_CAP_SQ_RECORD_DB = 1 << 1, + HNS_ROCE_QP_CAP_OWNER_DB = 1 << 2, + HNS_ROCE_QP_CAP_DIRECT_WQE = 1 << 5, +}; + struct hns_roce_ib_create_qp_resp { __aligned_u64 cap_flags; + __aligned_u64 dwqe_mmap_key; +}; + +enum { + HNS_ROCE_EXSGE_FLAGS = 1 << 0, + HNS_ROCE_RQ_INLINE_FLAGS = 1 << 1, + HNS_ROCE_CQE_INLINE_FLAGS = 1 << 2, +}; + +enum { + HNS_ROCE_RSP_EXSGE_FLAGS = 1 << 0, + HNS_ROCE_RSP_RQ_INLINE_FLAGS = 1 << 1, + HNS_ROCE_RSP_CQE_INLINE_FLAGS = 1 << 2, }; struct hns_roce_ib_alloc_ucontext_resp { __u32 qp_tab_size; __u32 cqe_size; + __u32 srq_tab_size; + __u32 reserved; + __u32 config; + __u32 max_inline_data; +}; + +struct hns_roce_ib_alloc_ucontext { + __u32 config; + __u32 reserved; }; struct hns_roce_ib_alloc_pd_resp { diff --git a/linux-headers/include/rdma/i40iw-abi.h b/linux-headers/include/rdma/i40iw-abi.h deleted file mode 100644 index 79890baa6fd..00000000000 --- a/linux-headers/include/rdma/i40iw-abi.h +++ /dev/null @@ -1,107 +0,0 @@ -/* - * Copyright (c) 2006 - 2016 Intel Corporation. All rights reserved. - * Copyright (c) 2005 Topspin Communications. All rights reserved. - * Copyright (c) 2005 Cisco Systems. All rights reserved. - * Copyright (c) 2005 Open Grid Computing, Inc. All rights reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * OpenIB.org BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - * - */ - -#ifndef I40IW_ABI_H -#define I40IW_ABI_H - -#include - -#define I40IW_ABI_VER 5 - -struct i40iw_alloc_ucontext_req { - __u32 reserved32; - __u8 userspace_ver; - __u8 reserved8[3]; -}; - -struct i40iw_alloc_ucontext_resp { - __u32 max_pds; /* maximum pds allowed for this user process */ - __u32 max_qps; /* maximum qps allowed for this user process */ - __u32 wq_size; /* size of the WQs (sq+rq) allocated to the mmaped area */ - __u8 kernel_ver; - __u8 reserved[3]; -}; - -struct i40iw_alloc_pd_resp { - __u32 pd_id; - __u8 reserved[4]; -}; - -struct i40iw_create_cq_req { - __aligned_u64 user_cq_buffer; - __aligned_u64 user_shadow_area; -}; - -struct i40iw_create_qp_req { - __aligned_u64 user_wqe_buffers; - __aligned_u64 user_compl_ctx; - - /* UDA QP PHB */ - __aligned_u64 user_sq_phb; /* place for VA of the sq phb buff */ - __aligned_u64 user_rq_phb; /* place for VA of the rq phb buff */ -}; - -enum i40iw_memreg_type { - IW_MEMREG_TYPE_MEM = 0x0000, - IW_MEMREG_TYPE_QP = 0x0001, - IW_MEMREG_TYPE_CQ = 0x0002, -}; - -struct i40iw_mem_reg_req { - __u16 reg_type; /* Memory, QP or CQ */ - __u16 cq_pages; - __u16 rq_pages; - __u16 sq_pages; -}; - -struct i40iw_create_cq_resp { - __u32 cq_id; - __u32 cq_size; - __u32 mmap_db_index; - __u32 reserved; -}; - -struct i40iw_create_qp_resp { - __u32 qp_id; - __u32 actual_sq_size; - __u32 actual_rq_size; - __u32 i40iw_drv_opt; - __u16 push_idx; - __u8 lsmm; - __u8 rsvd2; -}; - -#endif diff --git a/linux-headers/include/rdma/ib_user_ioctl_cmds.h b/linux-headers/include/rdma/ib_user_ioctl_cmds.h index 7968a184535..dafc7ebe545 100644 --- a/linux-headers/include/rdma/ib_user_ioctl_cmds.h +++ b/linux-headers/include/rdma/ib_user_ioctl_cmds.h @@ -1,5 +1,6 @@ /* * Copyright (c) 2018, Mellanox Technologies inc. All rights reserved. + * Copyright (c) 2020, Intel Corporation. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU @@ -251,6 +252,7 @@ enum uverbs_methods_mr { UVERBS_METHOD_MR_DESTROY, UVERBS_METHOD_ADVISE_MR, UVERBS_METHOD_QUERY_MR, + UVERBS_METHOD_REG_DMABUF_MR, }; enum uverbs_attrs_mr_destroy_ids { @@ -272,6 +274,18 @@ enum uverbs_attrs_query_mr_cmd_attr_ids { UVERBS_ATTR_QUERY_MR_RESP_IOVA, }; +enum uverbs_attrs_reg_dmabuf_mr_cmd_attr_ids { + UVERBS_ATTR_REG_DMABUF_MR_HANDLE, + UVERBS_ATTR_REG_DMABUF_MR_PD_HANDLE, + UVERBS_ATTR_REG_DMABUF_MR_OFFSET, + UVERBS_ATTR_REG_DMABUF_MR_LENGTH, + UVERBS_ATTR_REG_DMABUF_MR_IOVA, + UVERBS_ATTR_REG_DMABUF_MR_FD, + UVERBS_ATTR_REG_DMABUF_MR_ACCESS_FLAGS, + UVERBS_ATTR_REG_DMABUF_MR_RESP_LKEY, + UVERBS_ATTR_REG_DMABUF_MR_RESP_RKEY, +}; + enum uverbs_attrs_create_counters_cmd_attr_ids { UVERBS_ATTR_CREATE_COUNTERS_HANDLE, }; diff --git a/linux-headers/include/rdma/ib_user_ioctl_verbs.h b/linux-headers/include/rdma/ib_user_ioctl_verbs.h index 22483799cd0..d7c5aaa3274 100644 --- a/linux-headers/include/rdma/ib_user_ioctl_verbs.h +++ b/linux-headers/include/rdma/ib_user_ioctl_verbs.h @@ -57,6 +57,8 @@ enum ib_uverbs_access_flags { IB_UVERBS_ACCESS_ZERO_BASED = 1 << 5, IB_UVERBS_ACCESS_ON_DEMAND = 1 << 6, IB_UVERBS_ACCESS_HUGETLB = 1 << 7, + IB_UVERBS_ACCESS_FLUSH_GLOBAL = 1 << 8, + IB_UVERBS_ACCESS_FLUSH_PERSISTENT = 1 << 9, IB_UVERBS_ACCESS_RELAXED_ORDERING = IB_UVERBS_ACCESS_OPTIONAL_FIRST, IB_UVERBS_ACCESS_OPTIONAL_RANGE = @@ -240,6 +242,7 @@ enum rdma_driver_id { RDMA_DRIVER_OCRDMA, RDMA_DRIVER_NES, RDMA_DRIVER_I40IW, + RDMA_DRIVER_IRDMA = RDMA_DRIVER_I40IW, RDMA_DRIVER_VMW_PVRDMA, RDMA_DRIVER_QEDR, RDMA_DRIVER_HNS, @@ -249,6 +252,8 @@ enum rdma_driver_id { RDMA_DRIVER_QIB, RDMA_DRIVER_EFA, RDMA_DRIVER_SIW, + RDMA_DRIVER_ERDMA, + RDMA_DRIVER_MANA, }; enum ib_uverbs_gid_type { diff --git a/linux-headers/include/rdma/ib_user_mad.h b/linux-headers/include/rdma/ib_user_mad.h index 90c0cf22802..10b5f6a4c67 100644 --- a/linux-headers/include/rdma/ib_user_mad.h +++ b/linux-headers/include/rdma/ib_user_mad.h @@ -143,7 +143,7 @@ struct ib_user_mad_hdr { */ struct ib_user_mad { struct ib_user_mad_hdr hdr; - __aligned_u64 data[0]; + __aligned_u64 data[]; }; /* diff --git a/linux-headers/include/rdma/ib_user_verbs.h b/linux-headers/include/rdma/ib_user_verbs.h index 456438c18c2..e16650f0c85 100644 --- a/linux-headers/include/rdma/ib_user_verbs.h +++ b/linux-headers/include/rdma/ib_user_verbs.h @@ -105,6 +105,18 @@ enum { IB_USER_VERBS_EX_CMD_MODIFY_CQ }; +/* see IBA A19.4.1.1 Placement Types */ +enum ib_placement_type { + IB_FLUSH_GLOBAL = 1U << 0, + IB_FLUSH_PERSISTENT = 1U << 1, +}; + +/* see IBA A19.4.1.2 Selectivity Level */ +enum ib_selectivity_level { + IB_FLUSH_RANGE = 0, + IB_FLUSH_MR, +}; + /* * Make sure that all structs defined in this file remain laid out so * that they pack the same way on 32-bit and 64-bit architectures (to @@ -158,18 +170,18 @@ struct ib_uverbs_ex_cmd_hdr { struct ib_uverbs_get_context { __aligned_u64 response; - __aligned_u64 driver_data[0]; + __aligned_u64 driver_data[]; }; struct ib_uverbs_get_context_resp { __u32 async_fd; __u32 num_comp_vectors; - __aligned_u64 driver_data[0]; + __aligned_u64 driver_data[]; }; struct ib_uverbs_query_device { __aligned_u64 response; - __aligned_u64 driver_data[0]; + __aligned_u64 driver_data[]; }; struct ib_uverbs_query_device_resp { @@ -278,7 +290,7 @@ struct ib_uverbs_query_port { __aligned_u64 response; __u8 port_num; __u8 reserved[7]; - __aligned_u64 driver_data[0]; + __aligned_u64 driver_data[]; }; struct ib_uverbs_query_port_resp { @@ -308,12 +320,12 @@ struct ib_uverbs_query_port_resp { struct ib_uverbs_alloc_pd { __aligned_u64 response; - __aligned_u64 driver_data[0]; + __aligned_u64 driver_data[]; }; struct ib_uverbs_alloc_pd_resp { __u32 pd_handle; - __u32 driver_data[0]; + __u32 driver_data[]; }; struct ib_uverbs_dealloc_pd { @@ -324,12 +336,12 @@ struct ib_uverbs_open_xrcd { __aligned_u64 response; __u32 fd; __u32 oflags; - __aligned_u64 driver_data[0]; + __aligned_u64 driver_data[]; }; struct ib_uverbs_open_xrcd_resp { __u32 xrcd_handle; - __u32 driver_data[0]; + __u32 driver_data[]; }; struct ib_uverbs_close_xrcd { @@ -343,14 +355,14 @@ struct ib_uverbs_reg_mr { __aligned_u64 hca_va; __u32 pd_handle; __u32 access_flags; - __aligned_u64 driver_data[0]; + __aligned_u64 driver_data[]; }; struct ib_uverbs_reg_mr_resp { __u32 mr_handle; __u32 lkey; __u32 rkey; - __u32 driver_data[0]; + __u32 driver_data[]; }; struct ib_uverbs_rereg_mr { @@ -362,13 +374,13 @@ struct ib_uverbs_rereg_mr { __aligned_u64 hca_va; __u32 pd_handle; __u32 access_flags; - __aligned_u64 driver_data[0]; + __aligned_u64 driver_data[]; }; struct ib_uverbs_rereg_mr_resp { __u32 lkey; __u32 rkey; - __aligned_u64 driver_data[0]; + __aligned_u64 driver_data[]; }; struct ib_uverbs_dereg_mr { @@ -380,13 +392,13 @@ struct ib_uverbs_alloc_mw { __u32 pd_handle; __u8 mw_type; __u8 reserved[3]; - __aligned_u64 driver_data[0]; + __aligned_u64 driver_data[]; }; struct ib_uverbs_alloc_mw_resp { __u32 mw_handle; __u32 rkey; - __aligned_u64 driver_data[0]; + __aligned_u64 driver_data[]; }; struct ib_uverbs_dealloc_mw { @@ -408,7 +420,7 @@ struct ib_uverbs_create_cq { __u32 comp_vector; __s32 comp_channel; __u32 reserved; - __aligned_u64 driver_data[0]; + __aligned_u64 driver_data[]; }; enum ib_uverbs_ex_create_cq_flags { @@ -442,13 +454,13 @@ struct ib_uverbs_resize_cq { __aligned_u64 response; __u32 cq_handle; __u32 cqe; - __aligned_u64 driver_data[0]; + __aligned_u64 driver_data[]; }; struct ib_uverbs_resize_cq_resp { __u32 cqe; __u32 reserved; - __aligned_u64 driver_data[0]; + __aligned_u64 driver_data[]; }; struct ib_uverbs_poll_cq { @@ -466,6 +478,8 @@ enum ib_uverbs_wc_opcode { IB_UVERBS_WC_BIND_MW = 5, IB_UVERBS_WC_LOCAL_INV = 6, IB_UVERBS_WC_TSO = 7, + IB_UVERBS_WC_FLUSH = 8, + IB_UVERBS_WC_ATOMIC_WRITE = 9, }; struct ib_uverbs_wc { @@ -492,7 +506,7 @@ struct ib_uverbs_wc { struct ib_uverbs_poll_cq_resp { __u32 count; __u32 reserved; - struct ib_uverbs_wc wc[0]; + struct ib_uverbs_wc wc[]; }; struct ib_uverbs_req_notify_cq { @@ -585,7 +599,7 @@ struct ib_uverbs_create_qp { __u8 qp_type; __u8 is_srq; __u8 reserved; - __aligned_u64 driver_data[0]; + __aligned_u64 driver_data[]; }; enum ib_uverbs_create_qp_mask { @@ -596,20 +610,6 @@ enum { IB_UVERBS_CREATE_QP_SUP_COMP_MASK = IB_UVERBS_CREATE_QP_MASK_IND_TABLE, }; -enum { - /* - * This value is equal to IB_QP_DEST_QPN. - */ - IB_USER_LEGACY_LAST_QP_ATTR_MASK = 1ULL << 20, -}; - -enum { - /* - * This value is equal to IB_QP_RATE_LIMIT. - */ - IB_USER_LAST_QP_ATTR_MASK = 1ULL << 25, -}; - struct ib_uverbs_ex_create_qp { __aligned_u64 user_handle; __u32 pd_handle; @@ -638,7 +638,7 @@ struct ib_uverbs_open_qp { __u32 qpn; __u8 qp_type; __u8 reserved[7]; - __aligned_u64 driver_data[0]; + __aligned_u64 driver_data[]; }; /* also used for open response */ @@ -683,7 +683,7 @@ struct ib_uverbs_query_qp { __aligned_u64 response; __u32 qp_handle; __u32 attr_mask; - __aligned_u64 driver_data[0]; + __aligned_u64 driver_data[]; }; struct ib_uverbs_query_qp_resp { @@ -717,7 +717,7 @@ struct ib_uverbs_query_qp_resp { __u8 alt_timeout; __u8 sq_sig_all; __u8 reserved[5]; - __aligned_u64 driver_data[0]; + __aligned_u64 driver_data[]; }; struct ib_uverbs_modify_qp { @@ -798,6 +798,8 @@ enum ib_uverbs_wr_opcode { IB_UVERBS_WR_RDMA_READ_WITH_INV = 11, IB_UVERBS_WR_MASKED_ATOMIC_CMP_AND_SWP = 12, IB_UVERBS_WR_MASKED_ATOMIC_FETCH_AND_ADD = 13, + IB_UVERBS_WR_FLUSH = 14, + IB_UVERBS_WR_ATOMIC_WRITE = 15, /* Review enum ib_wr_opcode before modifying this */ }; @@ -838,7 +840,7 @@ struct ib_uverbs_post_send { __u32 wr_count; __u32 sge_count; __u32 wqe_size; - struct ib_uverbs_send_wr send_wr[0]; + struct ib_uverbs_send_wr send_wr[]; }; struct ib_uverbs_post_send_resp { @@ -857,7 +859,7 @@ struct ib_uverbs_post_recv { __u32 wr_count; __u32 sge_count; __u32 wqe_size; - struct ib_uverbs_recv_wr recv_wr[0]; + struct ib_uverbs_recv_wr recv_wr[]; }; struct ib_uverbs_post_recv_resp { @@ -870,7 +872,7 @@ struct ib_uverbs_post_srq_recv { __u32 wr_count; __u32 sge_count; __u32 wqe_size; - struct ib_uverbs_recv_wr recv[0]; + struct ib_uverbs_recv_wr recv[]; }; struct ib_uverbs_post_srq_recv_resp { @@ -883,12 +885,12 @@ struct ib_uverbs_create_ah { __u32 pd_handle; __u32 reserved; struct ib_uverbs_ah_attr attr; - __aligned_u64 driver_data[0]; + __aligned_u64 driver_data[]; }; struct ib_uverbs_create_ah_resp { __u32 ah_handle; - __u32 driver_data[0]; + __u32 driver_data[]; }; struct ib_uverbs_destroy_ah { @@ -900,7 +902,7 @@ struct ib_uverbs_attach_mcast { __u32 qp_handle; __u16 mlid; __u16 reserved; - __aligned_u64 driver_data[0]; + __aligned_u64 driver_data[]; }; struct ib_uverbs_detach_mcast { @@ -908,7 +910,7 @@ struct ib_uverbs_detach_mcast { __u32 qp_handle; __u16 mlid; __u16 reserved; - __aligned_u64 driver_data[0]; + __aligned_u64 driver_data[]; }; struct ib_uverbs_flow_spec_hdr { @@ -1149,7 +1151,7 @@ struct ib_uverbs_flow_attr { * struct ib_flow_spec_xxx * struct ib_flow_spec_yyy */ - struct ib_uverbs_flow_spec_hdr flow_specs[0]; + struct ib_uverbs_flow_spec_hdr flow_specs[]; }; struct ib_uverbs_create_flow { @@ -1175,7 +1177,7 @@ struct ib_uverbs_create_srq { __u32 max_wr; __u32 max_sge; __u32 srq_limit; - __aligned_u64 driver_data[0]; + __aligned_u64 driver_data[]; }; struct ib_uverbs_create_xsrq { @@ -1189,7 +1191,7 @@ struct ib_uverbs_create_xsrq { __u32 max_num_tags; __u32 xrcd_handle; __u32 cq_handle; - __aligned_u64 driver_data[0]; + __aligned_u64 driver_data[]; }; struct ib_uverbs_create_srq_resp { @@ -1197,7 +1199,7 @@ struct ib_uverbs_create_srq_resp { __u32 max_wr; __u32 max_sge; __u32 srqn; - __u32 driver_data[0]; + __u32 driver_data[]; }; struct ib_uverbs_modify_srq { @@ -1205,14 +1207,14 @@ struct ib_uverbs_modify_srq { __u32 attr_mask; __u32 max_wr; __u32 srq_limit; - __aligned_u64 driver_data[0]; + __aligned_u64 driver_data[]; }; struct ib_uverbs_query_srq { __aligned_u64 response; __u32 srq_handle; __u32 reserved; - __aligned_u64 driver_data[0]; + __aligned_u64 driver_data[]; }; struct ib_uverbs_query_srq_resp { @@ -1283,7 +1285,7 @@ struct ib_uverbs_ex_create_rwq_ind_table { * wq_handle1 * wq_handle2 */ - __u32 wq_handles[0]; + __u32 wq_handles[]; }; struct ib_uverbs_ex_create_rwq_ind_table_resp { @@ -1312,4 +1314,51 @@ struct ib_uverbs_ex_modify_cq { #define IB_DEVICE_NAME_MAX 64 +/* + * bits 9, 15, 16, 19, 22, 27, 30, 31, 32, 33, 35 and 37 may be set by old + * kernels and should not be used. + */ +enum ib_uverbs_device_cap_flags { + IB_UVERBS_DEVICE_RESIZE_MAX_WR = 1 << 0, + IB_UVERBS_DEVICE_BAD_PKEY_CNTR = 1 << 1, + IB_UVERBS_DEVICE_BAD_QKEY_CNTR = 1 << 2, + IB_UVERBS_DEVICE_RAW_MULTI = 1 << 3, + IB_UVERBS_DEVICE_AUTO_PATH_MIG = 1 << 4, + IB_UVERBS_DEVICE_CHANGE_PHY_PORT = 1 << 5, + IB_UVERBS_DEVICE_UD_AV_PORT_ENFORCE = 1 << 6, + IB_UVERBS_DEVICE_CURR_QP_STATE_MOD = 1 << 7, + IB_UVERBS_DEVICE_SHUTDOWN_PORT = 1 << 8, + /* IB_UVERBS_DEVICE_INIT_TYPE = 1 << 9, (not in use) */ + IB_UVERBS_DEVICE_PORT_ACTIVE_EVENT = 1 << 10, + IB_UVERBS_DEVICE_SYS_IMAGE_GUID = 1 << 11, + IB_UVERBS_DEVICE_RC_RNR_NAK_GEN = 1 << 12, + IB_UVERBS_DEVICE_SRQ_RESIZE = 1 << 13, + IB_UVERBS_DEVICE_N_NOTIFY_CQ = 1 << 14, + IB_UVERBS_DEVICE_MEM_WINDOW = 1 << 17, + IB_UVERBS_DEVICE_UD_IP_CSUM = 1 << 18, + IB_UVERBS_DEVICE_XRC = 1 << 20, + IB_UVERBS_DEVICE_MEM_MGT_EXTENSIONS = 1 << 21, + IB_UVERBS_DEVICE_MEM_WINDOW_TYPE_2A = 1 << 23, + IB_UVERBS_DEVICE_MEM_WINDOW_TYPE_2B = 1 << 24, + IB_UVERBS_DEVICE_RC_IP_CSUM = 1 << 25, + /* Deprecated. Please use IB_UVERBS_RAW_PACKET_CAP_IP_CSUM. */ + IB_UVERBS_DEVICE_RAW_IP_CSUM = 1 << 26, + IB_UVERBS_DEVICE_MANAGED_FLOW_STEERING = 1 << 29, + /* Deprecated. Please use IB_UVERBS_RAW_PACKET_CAP_SCATTER_FCS. */ + IB_UVERBS_DEVICE_RAW_SCATTER_FCS = 1ULL << 34, + IB_UVERBS_DEVICE_PCI_WRITE_END_PADDING = 1ULL << 36, + /* Flush placement types */ + IB_UVERBS_DEVICE_FLUSH_GLOBAL = 1ULL << 38, + IB_UVERBS_DEVICE_FLUSH_PERSISTENT = 1ULL << 39, + /* Atomic write attributes */ + IB_UVERBS_DEVICE_ATOMIC_WRITE = 1ULL << 40, +}; + +enum ib_uverbs_raw_packet_caps { + IB_UVERBS_RAW_PACKET_CAP_CVLAN_STRIPPING = 1 << 0, + IB_UVERBS_RAW_PACKET_CAP_SCATTER_FCS = 1 << 1, + IB_UVERBS_RAW_PACKET_CAP_IP_CSUM = 1 << 2, + IB_UVERBS_RAW_PACKET_CAP_DELAY_DROP = 1 << 3, +}; + #endif /* IB_USER_VERBS_H */ diff --git a/linux-headers/include/rdma/irdma-abi.h b/linux-headers/include/rdma/irdma-abi.h new file mode 100644 index 00000000000..bb18f15489e --- /dev/null +++ b/linux-headers/include/rdma/irdma-abi.h @@ -0,0 +1,120 @@ +/* SPDX-License-Identifier: (GPL-2.0 WITH Linux-syscall-note) OR Linux-OpenIB */ +/* + * Copyright (c) 2006 - 2021 Intel Corporation. All rights reserved. + * Copyright (c) 2005 Topspin Communications. All rights reserved. + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * Copyright (c) 2005 Open Grid Computing, Inc. All rights reserved. + */ + +#ifndef IRDMA_ABI_H +#define IRDMA_ABI_H + +#include + +/* irdma must support legacy GEN_1 i40iw kernel + * and user-space whose last ABI ver is 5 + */ +#define IRDMA_ABI_VER 5 + +enum irdma_memreg_type { + IRDMA_MEMREG_TYPE_MEM = 0, + IRDMA_MEMREG_TYPE_QP = 1, + IRDMA_MEMREG_TYPE_CQ = 2, +}; + +enum { + IRDMA_ALLOC_UCTX_USE_RAW_ATTR = 1 << 0, + IRDMA_ALLOC_UCTX_MIN_HW_WQ_SIZE = 1 << 1, +}; + +struct irdma_alloc_ucontext_req { + __u32 rsvd32; + __u8 userspace_ver; + __u8 rsvd8[3]; + __aligned_u64 comp_mask; +}; + +struct irdma_alloc_ucontext_resp { + __u32 max_pds; + __u32 max_qps; + __u32 wq_size; /* size of the WQs (SQ+RQ) in the mmaped area */ + __u8 kernel_ver; + __u8 rsvd[3]; + __aligned_u64 feature_flags; + __aligned_u64 db_mmap_key; + __u32 max_hw_wq_frags; + __u32 max_hw_read_sges; + __u32 max_hw_inline; + __u32 max_hw_rq_quanta; + __u32 max_hw_wq_quanta; + __u32 min_hw_cq_size; + __u32 max_hw_cq_size; + __u16 max_hw_sq_chunk; + __u8 hw_rev; + __u8 rsvd2; + __aligned_u64 comp_mask; + __u16 min_hw_wq_size; + __u8 rsvd3[6]; +}; + +struct irdma_alloc_pd_resp { + __u32 pd_id; + __u8 rsvd[4]; +}; + +struct irdma_resize_cq_req { + __aligned_u64 user_cq_buffer; +}; + +struct irdma_create_cq_req { + __aligned_u64 user_cq_buf; + __aligned_u64 user_shadow_area; +}; + +struct irdma_create_qp_req { + __aligned_u64 user_wqe_bufs; + __aligned_u64 user_compl_ctx; +}; + +struct irdma_mem_reg_req { + __u16 reg_type; /* enum irdma_memreg_type */ + __u16 cq_pages; + __u16 rq_pages; + __u16 sq_pages; +}; + +struct irdma_modify_qp_req { + __u8 sq_flush; + __u8 rq_flush; + __u8 rsvd[6]; +}; + +struct irdma_create_cq_resp { + __u32 cq_id; + __u32 cq_size; +}; + +struct irdma_create_qp_resp { + __u32 qp_id; + __u32 actual_sq_size; + __u32 actual_rq_size; + __u32 irdma_drv_opt; + __u16 push_idx; + __u8 lsmm; + __u8 rsvd; + __u32 qp_caps; +}; + +struct irdma_modify_qp_resp { + __aligned_u64 push_wqe_mmap_key; + __aligned_u64 push_db_mmap_key; + __u16 push_offset; + __u8 push_valid; + __u8 rsvd[5]; +}; + +struct irdma_create_ah_resp { + __u32 ah_id; + __u8 rsvd[4]; +}; +#endif /* IRDMA_ABI_H */ diff --git a/linux-headers/include/rdma/mana-abi.h b/linux-headers/include/rdma/mana-abi.h new file mode 100644 index 00000000000..5fcb31b37fb --- /dev/null +++ b/linux-headers/include/rdma/mana-abi.h @@ -0,0 +1,66 @@ +/* SPDX-License-Identifier: (GPL-2.0 WITH Linux-syscall-note) */ +/* + * Copyright (c) 2022, Microsoft Corporation. All rights reserved. + */ + +#ifndef MANA_ABI_USER_H +#define MANA_ABI_USER_H + +#include +#include + +/* + * Increment this value if any changes that break userspace ABI + * compatibility are made. + */ + +#define MANA_IB_UVERBS_ABI_VERSION 1 + +struct mana_ib_create_cq { + __aligned_u64 buf_addr; +}; + +struct mana_ib_create_qp { + __aligned_u64 sq_buf_addr; + __u32 sq_buf_size; + __u32 port; +}; + +struct mana_ib_create_qp_resp { + __u32 sqid; + __u32 cqid; + __u32 tx_vp_offset; + __u32 reserved; +}; + +struct mana_ib_create_wq { + __aligned_u64 wq_buf_addr; + __u32 wq_buf_size; + __u32 reserved; +}; + +/* RX Hash function flags */ +enum mana_ib_rx_hash_function_flags { + MANA_IB_RX_HASH_FUNC_TOEPLITZ = 1 << 0, +}; + +struct mana_ib_create_qp_rss { + __aligned_u64 rx_hash_fields_mask; + __u8 rx_hash_function; + __u8 reserved[7]; + __u32 rx_hash_key_len; + __u8 rx_hash_key[40]; + __u32 port; +}; + +struct rss_resp_entry { + __u32 cqid; + __u32 wqid; +}; + +struct mana_ib_create_qp_rss_resp { + __aligned_u64 num_entries; + struct rss_resp_entry entries[64]; +}; + +#endif diff --git a/linux-headers/include/rdma/mlx5-abi.h b/linux-headers/include/rdma/mlx5-abi.h index 27905a0268c..a96b7d2770e 100644 --- a/linux-headers/include/rdma/mlx5-abi.h +++ b/linux-headers/include/rdma/mlx5-abi.h @@ -50,6 +50,7 @@ enum { MLX5_QP_FLAG_ALLOW_SCATTER_CQE = 1 << 8, MLX5_QP_FLAG_PACKET_BASED_CREDIT_MODE = 1 << 9, MLX5_QP_FLAG_UAR_PAGE_INDEX = 1 << 10, + MLX5_QP_FLAG_DCI_STREAM = 1 << 11, }; enum { @@ -101,6 +102,9 @@ enum mlx5_ib_alloc_ucontext_resp_mask { MLX5_IB_ALLOC_UCONTEXT_RESP_MASK_CORE_CLOCK_OFFSET = 1UL << 0, MLX5_IB_ALLOC_UCONTEXT_RESP_MASK_DUMP_FILL_MKEY = 1UL << 1, MLX5_IB_ALLOC_UCONTEXT_RESP_MASK_ECE = 1UL << 2, + MLX5_IB_ALLOC_UCONTEXT_RESP_MASK_SQD2RTS = 1UL << 3, + MLX5_IB_ALLOC_UCONTEXT_RESP_MASK_REAL_TIME_TS = 1UL << 4, + MLX5_IB_ALLOC_UCONTEXT_RESP_MASK_MKEY_UPDATE_TAG = 1UL << 5, }; enum mlx5_user_cmds_supp_uhw { @@ -236,6 +240,11 @@ struct mlx5_ib_striding_rq_caps { __u32 reserved; }; +struct mlx5_ib_dci_streams_caps { + __u8 max_log_num_concurent; + __u8 max_log_num_errored; +}; + enum mlx5_ib_query_dev_resp_flags { /* Support 128B CQE compression */ MLX5_IB_QUERY_DEV_RESP_FLAGS_CQE_128B_COMP = 1 << 0, @@ -264,12 +273,14 @@ struct mlx5_ib_query_device_resp { struct mlx5_ib_sw_parsing_caps sw_parsing_caps; struct mlx5_ib_striding_rq_caps striding_rq_caps; __u32 tunnel_offloads_caps; /* enum mlx5_ib_tunnel_offloads */ - __u32 reserved; + struct mlx5_ib_dci_streams_caps dci_streams_caps; + __u16 reserved; }; enum mlx5_ib_create_cq_flags { MLX5_IB_CREATE_CQ_FLAGS_CQE_128B_PAD = 1 << 0, MLX5_IB_CREATE_CQ_FLAGS_UAR_PAGE_INDEX = 1 << 1, + MLX5_IB_CREATE_CQ_FLAGS_REAL_TIME_TS = 1 << 2, }; struct mlx5_ib_create_cq { @@ -310,6 +321,11 @@ struct mlx5_ib_create_srq_resp { __u32 reserved; }; +struct mlx5_ib_create_qp_dci_streams { + __u8 log_num_concurent; + __u8 log_num_errored; +}; + struct mlx5_ib_create_qp { __aligned_u64 buf_addr; __aligned_u64 db_addr; @@ -324,7 +340,8 @@ struct mlx5_ib_create_qp { __aligned_u64 access_key; }; __u32 ece_options; - __u32 reserved; + struct mlx5_ib_create_qp_dci_streams dci_streams; + __u16 reserved; }; /* RX Hash function flags */ diff --git a/linux-headers/include/rdma/mlx5_user_ioctl_cmds.h b/linux-headers/include/rdma/mlx5_user_ioctl_cmds.h index e24d66d278c..595edad03df 100644 --- a/linux-headers/include/rdma/mlx5_user_ioctl_cmds.h +++ b/linux-headers/include/rdma/mlx5_user_ioctl_cmds.h @@ -41,6 +41,25 @@ enum mlx5_ib_create_flow_action_attrs { MLX5_IB_ATTR_CREATE_FLOW_ACTION_FLAGS = (1U << UVERBS_ID_NS_SHIFT), }; +enum mlx5_ib_dm_methods { + MLX5_IB_METHOD_DM_MAP_OP_ADDR = (1U << UVERBS_ID_NS_SHIFT), + MLX5_IB_METHOD_DM_QUERY, +}; + +enum mlx5_ib_dm_map_op_addr_attrs { + MLX5_IB_ATTR_DM_MAP_OP_ADDR_REQ_HANDLE = (1U << UVERBS_ID_NS_SHIFT), + MLX5_IB_ATTR_DM_MAP_OP_ADDR_REQ_OP, + MLX5_IB_ATTR_DM_MAP_OP_ADDR_RESP_START_OFFSET, + MLX5_IB_ATTR_DM_MAP_OP_ADDR_RESP_PAGE_INDEX, +}; + +enum mlx5_ib_query_dm_attrs { + MLX5_IB_ATTR_QUERY_DM_REQ_HANDLE = (1U << UVERBS_ID_NS_SHIFT), + MLX5_IB_ATTR_QUERY_DM_RESP_START_OFFSET, + MLX5_IB_ATTR_QUERY_DM_RESP_PAGE_INDEX, + MLX5_IB_ATTR_QUERY_DM_RESP_LENGTH, +}; + enum mlx5_ib_alloc_dm_attrs { MLX5_IB_ATTR_ALLOC_DM_RESP_START_OFFSET = (1U << UVERBS_ID_NS_SHIFT), MLX5_IB_ATTR_ALLOC_DM_RESP_PAGE_INDEX, @@ -154,6 +173,8 @@ enum mlx5_ib_devx_umem_reg_attrs { MLX5_IB_ATTR_DEVX_UMEM_REG_LEN, MLX5_IB_ATTR_DEVX_UMEM_REG_ACCESS, MLX5_IB_ATTR_DEVX_UMEM_REG_OUT_ID, + MLX5_IB_ATTR_DEVX_UMEM_REG_PGSZ_BITMAP, + MLX5_IB_ATTR_DEVX_UMEM_REG_DMABUF_FD, }; enum mlx5_ib_devx_umem_dereg_attrs { @@ -208,6 +229,7 @@ enum mlx5_ib_objects { MLX5_IB_OBJECT_VAR, MLX5_IB_OBJECT_PP, MLX5_IB_OBJECT_UAR, + MLX5_IB_OBJECT_STEERING_ANCHOR, }; enum mlx5_ib_flow_matcher_create_attrs { @@ -228,11 +250,27 @@ enum mlx5_ib_flow_matcher_methods { MLX5_IB_METHOD_FLOW_MATCHER_DESTROY, }; +enum mlx5_ib_flow_steering_anchor_create_attrs { + MLX5_IB_ATTR_STEERING_ANCHOR_CREATE_HANDLE = (1U << UVERBS_ID_NS_SHIFT), + MLX5_IB_ATTR_STEERING_ANCHOR_FT_TYPE, + MLX5_IB_ATTR_STEERING_ANCHOR_PRIORITY, + MLX5_IB_ATTR_STEERING_ANCHOR_FT_ID, +}; + +enum mlx5_ib_flow_steering_anchor_destroy_attrs { + MLX5_IB_ATTR_STEERING_ANCHOR_DESTROY_HANDLE = (1U << UVERBS_ID_NS_SHIFT), +}; + +enum mlx5_ib_steering_anchor_methods { + MLX5_IB_METHOD_STEERING_ANCHOR_CREATE = (1U << UVERBS_ID_NS_SHIFT), + MLX5_IB_METHOD_STEERING_ANCHOR_DESTROY, +}; + enum mlx5_ib_device_query_context_attrs { MLX5_IB_ATTR_QUERY_CONTEXT_RESP_UCTX = (1U << UVERBS_ID_NS_SHIFT), }; -#define MLX5_IB_DW_MATCH_PARAM 0x80 +#define MLX5_IB_DW_MATCH_PARAM 0xA0 struct mlx5_ib_match_params { __u32 match_params[MLX5_IB_DW_MATCH_PARAM]; @@ -300,4 +338,13 @@ enum mlx5_ib_pd_methods { }; +enum mlx5_ib_device_methods { + MLX5_IB_METHOD_QUERY_PORT = (1U << UVERBS_ID_NS_SHIFT), +}; + +enum mlx5_ib_query_port_attrs { + MLX5_IB_ATTR_QUERY_PORT_PORT_NUM = (1U << UVERBS_ID_NS_SHIFT), + MLX5_IB_ATTR_QUERY_PORT, +}; + #endif diff --git a/linux-headers/include/rdma/mlx5_user_ioctl_verbs.h b/linux-headers/include/rdma/mlx5_user_ioctl_verbs.h index 56b26eaea08..7af9e09ea55 100644 --- a/linux-headers/include/rdma/mlx5_user_ioctl_verbs.h +++ b/linux-headers/include/rdma/mlx5_user_ioctl_verbs.h @@ -63,6 +63,7 @@ enum mlx5_ib_uapi_dm_type { MLX5_IB_UAPI_DM_TYPE_MEMIC, MLX5_IB_UAPI_DM_TYPE_STEERING_SW_ICM, MLX5_IB_UAPI_DM_TYPE_HEADER_MODIFY_SW_ICM, + MLX5_IB_UAPI_DM_TYPE_HEADER_MODIFY_PATTERN_SW_ICM, }; enum mlx5_ib_uapi_devx_create_event_channel_flags { @@ -83,5 +84,30 @@ enum mlx5_ib_uapi_uar_alloc_type { MLX5_IB_UAPI_UAR_ALLOC_TYPE_NC = 0x1, }; +enum mlx5_ib_uapi_query_port_flags { + MLX5_IB_UAPI_QUERY_PORT_VPORT = 1 << 0, + MLX5_IB_UAPI_QUERY_PORT_VPORT_VHCA_ID = 1 << 1, + MLX5_IB_UAPI_QUERY_PORT_VPORT_STEERING_ICM_RX = 1 << 2, + MLX5_IB_UAPI_QUERY_PORT_VPORT_STEERING_ICM_TX = 1 << 3, + MLX5_IB_UAPI_QUERY_PORT_VPORT_REG_C0 = 1 << 4, + MLX5_IB_UAPI_QUERY_PORT_ESW_OWNER_VHCA_ID = 1 << 5, +}; + +struct mlx5_ib_uapi_reg { + __u32 value; + __u32 mask; +}; + +struct mlx5_ib_uapi_query_port { + __aligned_u64 flags; + __u16 vport; + __u16 vport_vhca_id; + __u16 esw_owner_vhca_id; + __u16 rsvd0; + __aligned_u64 vport_steering_icm_rx; + __aligned_u64 vport_steering_icm_tx; + struct mlx5_ib_uapi_reg reg_c0; +}; + #endif diff --git a/linux-headers/include/rdma/rdma_netlink.h b/linux-headers/include/rdma/rdma_netlink.h index 4aef76ae317..92c528a0b46 100644 --- a/linux-headers/include/rdma/rdma_netlink.h +++ b/linux-headers/include/rdma/rdma_netlink.h @@ -293,6 +293,12 @@ enum rdma_nldev_command { RDMA_NLDEV_CMD_RES_MR_GET_RAW, + RDMA_NLDEV_CMD_RES_CTX_GET, /* can dump */ + + RDMA_NLDEV_CMD_RES_SRQ_GET, /* can dump */ + + RDMA_NLDEV_CMD_STAT_GET_STATUS, + RDMA_NLDEV_NUM_OPS }; @@ -533,6 +539,21 @@ enum rdma_nldev_attr { RDMA_NLDEV_ATTR_RES_RAW, /* binary */ + RDMA_NLDEV_ATTR_RES_CTX, /* nested table */ + RDMA_NLDEV_ATTR_RES_CTX_ENTRY, /* nested table */ + + RDMA_NLDEV_ATTR_RES_SRQ, /* nested table */ + RDMA_NLDEV_ATTR_RES_SRQ_ENTRY, /* nested table */ + RDMA_NLDEV_ATTR_RES_SRQN, /* u32 */ + + RDMA_NLDEV_ATTR_MIN_RANGE, /* u32 */ + RDMA_NLDEV_ATTR_MAX_RANGE, /* u32 */ + + RDMA_NLDEV_SYS_ATTR_COPY_ON_FORK, /* u8 */ + + RDMA_NLDEV_ATTR_STAT_HWCOUNTER_INDEX, /* u32 */ + RDMA_NLDEV_ATTR_STAT_HWCOUNTER_DYNAMIC, /* u8 */ + /* * Always the end */ diff --git a/linux-headers/include/rdma/rdma_user_cm.h b/linux-headers/include/rdma/rdma_user_cm.h index ed5a514305c..7cea03581f7 100644 --- a/linux-headers/include/rdma/rdma_user_cm.h +++ b/linux-headers/include/rdma/rdma_user_cm.h @@ -184,7 +184,7 @@ struct rdma_ucm_query_addr_resp { struct rdma_ucm_query_path_resp { __u32 num_paths; __u32 reserved; - struct ib_path_rec_data path_data[0]; + struct ib_path_rec_data path_data[]; }; struct rdma_ucm_conn_param { diff --git a/linux-headers/include/rdma/rdma_user_ioctl_cmds.h b/linux-headers/include/rdma/rdma_user_ioctl_cmds.h index 85e84dd1a8a..c7510cdc04f 100644 --- a/linux-headers/include/rdma/rdma_user_ioctl_cmds.h +++ b/linux-headers/include/rdma/rdma_user_ioctl_cmds.h @@ -81,7 +81,7 @@ struct ib_uverbs_ioctl_hdr { __aligned_u64 reserved1; __u32 driver_id; __u32 reserved2; - struct ib_uverbs_attr attrs[0]; + struct ib_uverbs_attr attrs[]; }; #endif diff --git a/linux-headers/include/rdma/rdma_user_rxe.h b/linux-headers/include/rdma/rdma_user_rxe.h index e591d8c1f3c..24735d5b585 100644 --- a/linux-headers/include/rdma/rdma_user_rxe.h +++ b/linux-headers/include/rdma/rdma_user_rxe.h @@ -74,7 +74,7 @@ struct rxe_av { struct rxe_send_wr { __aligned_u64 wr_id; - __u32 num_sge; + __u32 reserved; __u32 opcode; __u32 send_flags; union { @@ -82,6 +82,13 @@ struct rxe_send_wr { __u32 invalidate_rkey; } ex; union { + struct { + __aligned_u64 remote_addr; + __u32 length; + __u32 rkey; + __u8 type; + __u8 level; + } flush; struct { __aligned_u64 remote_addr; __u32 rkey; @@ -98,16 +105,20 @@ struct rxe_send_wr { __u32 remote_qpn; __u32 remote_qkey; __u16 pkey_index; + __u16 reserved; + __u32 ah_num; + __u32 pad[4]; + struct rxe_av av; } ud; - /* reg is only used by the kernel and is not part of the uapi */ struct { - union { - struct ib_mr *mr; - __aligned_u64 reserved; - }; - __u32 key; - __u32 access; - } reg; + __aligned_u64 addr; + __aligned_u64 length; + __u32 mr_lkey; + __u32 mw_rkey; + __u32 rkey; + __u32 access; + } mw; + /* reg is only used by the kernel and is not part of the uapi */ } wr; }; @@ -131,14 +142,14 @@ struct rxe_dma_info { __u32 sge_offset; __u32 reserved; union { - __u8 inline_data[0]; - struct rxe_sge sge[0]; + __DECLARE_FLEX_ARRAY(__u8, inline_data); + __DECLARE_FLEX_ARRAY(__u8, atomic_wr); + __DECLARE_FLEX_ARRAY(struct rxe_sge, sge); }; }; struct rxe_send_wqe { struct rxe_send_wr wr; - struct rxe_av av; __u32 status; __u32 state; __aligned_u64 iova; @@ -153,11 +164,16 @@ struct rxe_send_wqe { struct rxe_recv_wqe { __aligned_u64 wr_id; - __u32 num_sge; + __u32 reserved; __u32 padding; struct rxe_dma_info dma; }; +struct rxe_create_ah_resp { + __u32 ah_num; + __u32 reserved; +}; + struct rxe_create_cq_resp { struct mminfo mi; }; @@ -181,4 +197,25 @@ struct rxe_modify_srq_cmd { __aligned_u64 mmap_info_addr; }; +/* This data structure is stored at the base of work and + * completion queues shared between user space and kernel space. + * It contains the producer and consumer indices. Is also + * contains a copy of the queue size parameters for user space + * to use but the kernel must use the parameters in the + * rxe_queue struct. For performance reasons arrange to have + * producer and consumer indices in separate cache lines + * the kernel should always mask the indices to avoid accessing + * memory outside of the data area + */ +struct rxe_queue_buf { + __u32 log2_elem_size; + __u32 index_mask; + __u32 pad_1[30]; + __u32 producer_index; + __u32 pad_2[31]; + __u32 consumer_index; + __u32 pad_3[31]; + __u8 data[]; +}; + #endif /* RDMA_USER_RXE_H */ diff --git a/linux-headers/include/rdma/vmw_pvrdma-abi.h b/linux-headers/include/rdma/vmw_pvrdma-abi.h index f8b638c7337..901a4fd72c0 100644 --- a/linux-headers/include/rdma/vmw_pvrdma-abi.h +++ b/linux-headers/include/rdma/vmw_pvrdma-abi.h @@ -133,6 +133,13 @@ enum pvrdma_wc_flags { PVRDMA_WC_FLAGS_MAX = PVRDMA_WC_WITH_NETWORK_HDR_TYPE, }; +enum pvrdma_network_type { + PVRDMA_NETWORK_IB, + PVRDMA_NETWORK_ROCE_V1 = PVRDMA_NETWORK_IB, + PVRDMA_NETWORK_IPV4, + PVRDMA_NETWORK_IPV6 +}; + struct pvrdma_alloc_ucontext_resp { __u32 qp_tab_size; __u32 reserved; diff --git a/linux-headers/include/scsi/fc/fc_els.h b/linux-headers/include/scsi/fc/fc_els.h index 41805ee146d..47b9c60ecda 100644 --- a/linux-headers/include/scsi/fc/fc_els.h +++ b/linux-headers/include/scsi/fc/fc_els.h @@ -41,6 +41,7 @@ enum fc_els_cmd { ELS_REC = 0x13, /* read exchange concise */ ELS_SRR = 0x14, /* sequence retransmission request */ ELS_FPIN = 0x16, /* Fabric Performance Impact Notification */ + ELS_EDC = 0x17, /* Exchange Diagnostic Capabilities */ ELS_RDP = 0x18, /* Read Diagnostic Parameters */ ELS_RDF = 0x19, /* Register Diagnostic Functions */ ELS_PRLI = 0x20, /* process login */ @@ -111,6 +112,7 @@ enum fc_els_cmd { [ELS_REC] = "REC", \ [ELS_SRR] = "SRR", \ [ELS_FPIN] = "FPIN", \ + [ELS_EDC] = "EDC", \ [ELS_RDP] = "RDP", \ [ELS_RDF] = "RDF", \ [ELS_PRLI] = "PRLI", \ @@ -218,6 +220,10 @@ enum fc_els_rjt_explan { enum fc_ls_tlv_dtag { ELS_DTAG_LS_REQ_INFO = 0x00000001, /* Link Service Request Information Descriptor */ + ELS_DTAG_LNK_FAULT_CAP = 0x0001000D, + /* Link Fault Capability Descriptor */ + ELS_DTAG_CG_SIGNAL_CAP = 0x0001000F, + /* Congestion Signaling Capability Descriptor */ ELS_DTAG_LNK_INTEGRITY = 0x00020001, /* Link Integrity Notification Descriptor */ ELS_DTAG_DELIVERY = 0x00020002, @@ -236,6 +242,8 @@ enum fc_ls_tlv_dtag { */ #define FC_LS_TLV_DTAG_INIT { \ { ELS_DTAG_LS_REQ_INFO, "Link Service Request Information" }, \ + { ELS_DTAG_LNK_FAULT_CAP, "Link Fault Capability" }, \ + { ELS_DTAG_CG_SIGNAL_CAP, "Congestion Signaling Capability" }, \ { ELS_DTAG_LNK_INTEGRITY, "Link Integrity Notification" }, \ { ELS_DTAG_DELIVERY, "Delivery Notification Present" }, \ { ELS_DTAG_PEER_CONGEST, "Peer Congestion Notification" }, \ @@ -256,7 +264,7 @@ struct fc_tlv_desc { * Size of descriptor excluding * desc_tag and desc_len fields. */ - __u8 desc_value[0]; /* Descriptor Value */ + __u8 desc_value[]; /* Descriptor Value */ }; /* Descriptor tag and len fields are considered the mandatory header @@ -916,7 +924,9 @@ enum fc_els_clid_ic { ELS_CLID_IC_LIP = 8, /* receiving LIP */ }; - +/* + * Link Integrity event types + */ enum fc_fpin_li_event_types { FPIN_LI_UNKNOWN = 0x0, FPIN_LI_LINK_FAILURE = 0x1, @@ -943,6 +953,54 @@ enum fc_fpin_li_event_types { { FPIN_LI_DEVICE_SPEC, "Device Specific" }, \ } +/* + * Delivery event types + */ +enum fc_fpin_deli_event_types { + FPIN_DELI_UNKNOWN = 0x0, + FPIN_DELI_TIMEOUT = 0x1, + FPIN_DELI_UNABLE_TO_ROUTE = 0x2, + FPIN_DELI_DEVICE_SPEC = 0xF, +}; + +/* + * Initializer useful for decoding table. + * Please keep this in sync with the above definitions. + */ +#define FC_FPIN_DELI_EVT_TYPES_INIT { \ + { FPIN_DELI_UNKNOWN, "Unknown" }, \ + { FPIN_DELI_TIMEOUT, "Timeout" }, \ + { FPIN_DELI_UNABLE_TO_ROUTE, "Unable to Route" }, \ + { FPIN_DELI_DEVICE_SPEC, "Device Specific" }, \ +} + +/* + * Congestion event types + */ +enum fc_fpin_congn_event_types { + FPIN_CONGN_CLEAR = 0x0, + FPIN_CONGN_LOST_CREDIT = 0x1, + FPIN_CONGN_CREDIT_STALL = 0x2, + FPIN_CONGN_OVERSUBSCRIPTION = 0x3, + FPIN_CONGN_DEVICE_SPEC = 0xF, +}; + +/* + * Initializer useful for decoding table. + * Please keep this in sync with the above definitions. + */ +#define FC_FPIN_CONGN_EVT_TYPES_INIT { \ + { FPIN_CONGN_CLEAR, "Clear" }, \ + { FPIN_CONGN_LOST_CREDIT, "Lost Credit" }, \ + { FPIN_CONGN_CREDIT_STALL, "Credit Stall" }, \ + { FPIN_CONGN_OVERSUBSCRIPTION, "Oversubscription" }, \ + { FPIN_CONGN_DEVICE_SPEC, "Device Specific" }, \ +} + +enum fc_fpin_congn_severity_types { + FPIN_CONGN_SEVERITY_WARNING = 0xF1, + FPIN_CONGN_SEVERITY_ERROR = 0xF7, +}; /* * Link Integrity Notification Descriptor @@ -969,11 +1027,73 @@ struct fc_fn_li_desc { * threshold to caause the LI event */ __be32 pname_count; /* number of portname_list elements */ - __be64 pname_list[0]; /* list of N_Port_Names accessible + __be64 pname_list[]; /* list of N_Port_Names accessible * through the attached port */ }; +/* + * Delivery Notification Descriptor + */ +struct fc_fn_deli_desc { + __be32 desc_tag; /* Descriptor Tag (0x00020002) */ + __be32 desc_len; /* Length of Descriptor (in bytes). + * Size of descriptor excluding + * desc_tag and desc_len fields. + */ + __be64 detecting_wwpn; /* Port Name that detected event */ + __be64 attached_wwpn; /* Port Name of device attached to + * detecting Port Name + */ + __be32 deli_reason_code;/* see enum fc_fpin_deli_event_types */ +}; + +/* + * Peer Congestion Notification Descriptor + */ +struct fc_fn_peer_congn_desc { + __be32 desc_tag; /* Descriptor Tag (0x00020003) */ + __be32 desc_len; /* Length of Descriptor (in bytes). + * Size of descriptor excluding + * desc_tag and desc_len fields. + */ + __be64 detecting_wwpn; /* Port Name that detected event */ + __be64 attached_wwpn; /* Port Name of device attached to + * detecting Port Name + */ + __be16 event_type; /* see enum fc_fpin_congn_event_types */ + __be16 event_modifier; /* Implementation specific value + * describing the event type + */ + __be32 event_period; /* duration (ms) of the detected + * congestion event + */ + __be32 pname_count; /* number of portname_list elements */ + __be64 pname_list[]; /* list of N_Port_Names accessible + * through the attached port + */ +}; + +/* + * Congestion Notification Descriptor + */ +struct fc_fn_congn_desc { + __be32 desc_tag; /* Descriptor Tag (0x00020004) */ + __be32 desc_len; /* Length of Descriptor (in bytes). + * Size of descriptor excluding + * desc_tag and desc_len fields. + */ + __be16 event_type; /* see enum fc_fpin_congn_event_types */ + __be16 event_modifier; /* Implementation specific value + * describing the event type + */ + __be32 event_period; /* duration (ms) of the detected + * congestion event + */ + __u8 severity; /* command */ + __u8 resv[3]; /* reserved - must be zero */ +}; + /* * ELS_FPIN - Fabric Performance Impact Notification */ @@ -984,7 +1104,7 @@ struct fc_els_fpin { * Size of ELS excluding fpin_cmd, * fpin_zero and desc_len fields. */ - struct fc_tlv_desc fpin_desc[0]; /* Descriptor list */ + struct fc_tlv_desc fpin_desc[]; /* Descriptor list */ }; /* Diagnostic Function Descriptor - FPIN Registration */ @@ -995,7 +1115,7 @@ struct fc_df_desc_fpin_reg { * desc_tag and desc_len fields. */ __be32 count; /* Number of desc_tags elements */ - __be32 desc_tags[0]; /* Array of Descriptor Tags. + __be32 desc_tags[]; /* Array of Descriptor Tags. * Each tag indicates a function * supported by the N_Port (request) * or by the N_Port and Fabric @@ -1015,7 +1135,7 @@ struct fc_els_rdf { * Size of ELS excluding fpin_cmd, * fpin_zero and desc_len fields. */ - struct fc_tlv_desc desc[0]; /* Descriptor list */ + struct fc_tlv_desc desc[]; /* Descriptor list */ }; /* @@ -1028,7 +1148,105 @@ struct fc_els_rdf_resp { * and desc_list_len fields. */ struct fc_els_lsri_desc lsri; - struct fc_tlv_desc desc[0]; /* Supported Descriptor list */ + struct fc_tlv_desc desc[]; /* Supported Descriptor list */ +}; + + +/* + * Diagnostic Capability Descriptors for EDC ELS + */ + +/* + * Diagnostic: Link Fault Capability Descriptor + */ +struct fc_diag_lnkflt_desc { + __be32 desc_tag; /* Descriptor Tag (0x0001000D) */ + __be32 desc_len; /* Length of Descriptor (in bytes). + * Size of descriptor excluding + * desc_tag and desc_len fields. + * 12 bytes + */ + __be32 degrade_activate_threshold; + __be32 degrade_deactivate_threshold; + __be32 fec_degrade_interval; +}; + +enum fc_edc_cg_signal_cap_types { + /* Note: Capability: bits 31:4 Rsvd; bits 3:0 are capabilities */ + EDC_CG_SIG_NOTSUPPORTED = 0x00, /* neither supported */ + EDC_CG_SIG_WARN_ONLY = 0x01, + EDC_CG_SIG_WARN_ALARM = 0x02, /* both supported */ +}; + +/* + * Initializer useful for decoding table. + * Please keep this in sync with the above definitions. + */ +#define FC_EDC_CG_SIGNAL_CAP_TYPES_INIT { \ + { EDC_CG_SIG_NOTSUPPORTED, "Signaling Not Supported" }, \ + { EDC_CG_SIG_WARN_ONLY, "Warning Signal" }, \ + { EDC_CG_SIG_WARN_ALARM, "Warning and Alarm Signals" }, \ +} + +enum fc_diag_cg_sig_freq_types { + EDC_CG_SIGFREQ_CNT_MIN = 1, /* Min Frequency Count */ + EDC_CG_SIGFREQ_CNT_MAX = 999, /* Max Frequency Count */ + + EDC_CG_SIGFREQ_SEC = 0x1, /* Units: seconds */ + EDC_CG_SIGFREQ_MSEC = 0x2, /* Units: milliseconds */ +}; + +struct fc_diag_cg_sig_freq { + __be16 count; /* Time between signals + * note: upper 6 bits rsvd + */ + __be16 units; /* Time unit for count + * note: upper 12 bits rsvd + */ +}; + +/* + * Diagnostic: Congestion Signaling Capability Descriptor + */ +struct fc_diag_cg_sig_desc { + __be32 desc_tag; /* Descriptor Tag (0x0001000F) */ + __be32 desc_len; /* Length of Descriptor (in bytes). + * Size of descriptor excluding + * desc_tag and desc_len fields. + * 16 bytes + */ + __be32 xmt_signal_capability; + struct fc_diag_cg_sig_freq xmt_signal_frequency; + __be32 rcv_signal_capability; + struct fc_diag_cg_sig_freq rcv_signal_frequency; +}; + +/* + * ELS_EDC - Exchange Diagnostic Capabilities + */ +struct fc_els_edc { + __u8 edc_cmd; /* command (0x17) */ + __u8 edc_zero[3]; /* specified as zero - part of cmd */ + __be32 desc_len; /* Length of Descriptor List (in bytes). + * Size of ELS excluding edc_cmd, + * edc_zero and desc_len fields. + */ + struct fc_tlv_desc desc[]; + /* Diagnostic Descriptor list */ +}; + +/* + * ELS EDC LS_ACC Response. + */ +struct fc_els_edc_resp { + struct fc_els_ls_acc acc_hdr; + __be32 desc_list_len; /* Length of response (in + * bytes). Excludes acc_hdr + * and desc_list_len fields. + */ + struct fc_els_lsri_desc lsri; + struct fc_tlv_desc desc[]; + /* Supported Diagnostic Descriptor list */ }; diff --git a/linux-headers/include/scsi/scsi_bsg_fc.h b/linux-headers/include/scsi/scsi_bsg_fc.h index 3ae65e93235..5e46cf1054a 100644 --- a/linux-headers/include/scsi/scsi_bsg_fc.h +++ b/linux-headers/include/scsi/scsi_bsg_fc.h @@ -209,14 +209,14 @@ struct fc_bsg_host_vendor { __u64 vendor_id; /* start of vendor command area */ - __u32 vendor_cmd[0]; + __u32 vendor_cmd[]; }; /* Response: */ struct fc_bsg_host_vendor_reply { /* start of vendor response area */ - __u32 vendor_rsp[0]; + __DECLARE_FLEX_ARRAY(__u32, vendor_rsp); }; diff --git a/linux-headers/include/scsi/scsi_bsg_mpi3mr.h b/linux-headers/include/scsi/scsi_bsg_mpi3mr.h new file mode 100644 index 00000000000..907d345f04f --- /dev/null +++ b/linux-headers/include/scsi/scsi_bsg_mpi3mr.h @@ -0,0 +1,576 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later WITH Linux-syscall-note */ +/* + * Driver for Broadcom MPI3 Storage Controllers + * + * Copyright (C) 2017-2022 Broadcom Inc. + * (mailto: mpi3mr-linuxdrv.pdl@broadcom.com) + * + */ + +#ifndef SCSI_BSG_MPI3MR_H_INCLUDED +#define SCSI_BSG_MPI3MR_H_INCLUDED + +#include + +/* Definitions for BSG commands */ +#define MPI3MR_IOCTL_VERSION 0x06 + +#define MPI3MR_APP_DEFAULT_TIMEOUT (60) /*seconds*/ + +#define MPI3MR_BSG_ADPTYPE_UNKNOWN 0 +#define MPI3MR_BSG_ADPTYPE_AVGFAMILY 1 + +#define MPI3MR_BSG_ADPSTATE_UNKNOWN 0 +#define MPI3MR_BSG_ADPSTATE_OPERATIONAL 1 +#define MPI3MR_BSG_ADPSTATE_FAULT 2 +#define MPI3MR_BSG_ADPSTATE_IN_RESET 3 +#define MPI3MR_BSG_ADPSTATE_UNRECOVERABLE 4 + +#define MPI3MR_BSG_ADPRESET_UNKNOWN 0 +#define MPI3MR_BSG_ADPRESET_SOFT 1 +#define MPI3MR_BSG_ADPRESET_DIAG_FAULT 2 + +#define MPI3MR_BSG_LOGDATA_MAX_ENTRIES 400 +#define MPI3MR_BSG_LOGDATA_ENTRY_HEADER_SZ 4 + +#define MPI3MR_DRVBSG_OPCODE_UNKNOWN 0 +#define MPI3MR_DRVBSG_OPCODE_ADPINFO 1 +#define MPI3MR_DRVBSG_OPCODE_ADPRESET 2 +#define MPI3MR_DRVBSG_OPCODE_ALLTGTDEVINFO 4 +#define MPI3MR_DRVBSG_OPCODE_GETCHGCNT 5 +#define MPI3MR_DRVBSG_OPCODE_LOGDATAENABLE 6 +#define MPI3MR_DRVBSG_OPCODE_PELENABLE 7 +#define MPI3MR_DRVBSG_OPCODE_GETLOGDATA 8 +#define MPI3MR_DRVBSG_OPCODE_QUERY_HDB 9 +#define MPI3MR_DRVBSG_OPCODE_REPOST_HDB 10 +#define MPI3MR_DRVBSG_OPCODE_UPLOAD_HDB 11 +#define MPI3MR_DRVBSG_OPCODE_REFRESH_HDB_TRIGGERS 12 + + +#define MPI3MR_BSG_BUFTYPE_UNKNOWN 0 +#define MPI3MR_BSG_BUFTYPE_RAIDMGMT_CMD 1 +#define MPI3MR_BSG_BUFTYPE_RAIDMGMT_RESP 2 +#define MPI3MR_BSG_BUFTYPE_DATA_IN 3 +#define MPI3MR_BSG_BUFTYPE_DATA_OUT 4 +#define MPI3MR_BSG_BUFTYPE_MPI_REPLY 5 +#define MPI3MR_BSG_BUFTYPE_ERR_RESPONSE 6 +#define MPI3MR_BSG_BUFTYPE_MPI_REQUEST 0xFE + +#define MPI3MR_BSG_MPI_REPLY_BUFTYPE_UNKNOWN 0 +#define MPI3MR_BSG_MPI_REPLY_BUFTYPE_STATUS 1 +#define MPI3MR_BSG_MPI_REPLY_BUFTYPE_ADDRESS 2 + +#define MPI3MR_HDB_BUFTYPE_UNKNOWN 0 +#define MPI3MR_HDB_BUFTYPE_TRACE 1 +#define MPI3MR_HDB_BUFTYPE_FIRMWARE 2 +#define MPI3MR_HDB_BUFTYPE_RESERVED 3 + +#define MPI3MR_HDB_BUFSTATUS_UNKNOWN 0 +#define MPI3MR_HDB_BUFSTATUS_NOT_ALLOCATED 1 +#define MPI3MR_HDB_BUFSTATUS_POSTED_UNPAUSED 2 +#define MPI3MR_HDB_BUFSTATUS_POSTED_PAUSED 3 +#define MPI3MR_HDB_BUFSTATUS_RELEASED 4 + +#define MPI3MR_HDB_TRIGGER_TYPE_UNKNOWN 0 +#define MPI3MR_HDB_TRIGGER_TYPE_DIAGFAULT 1 +#define MPI3MR_HDB_TRIGGER_TYPE_ELEMENT 2 +#define MPI3MR_HDB_TRIGGER_TYPE_MASTER 3 + + +/* Supported BSG commands */ +enum command { + MPI3MR_DRV_CMD = 1, + MPI3MR_MPT_CMD = 2, +}; + +/** + * struct mpi3_driver_info_layout - Information about driver + * + * @information_length: Length of this structure in bytes + * @driver_signature: Driver Vendor name + * @os_name: Operating System Name + * @driver_name: Driver name + * @driver_version: Driver version + * @driver_release_date: Driver release date + * @driver_capabilities: Driver capabilities + */ +struct mpi3_driver_info_layout { + __le32 information_length; + __u8 driver_signature[12]; + __u8 os_name[16]; + __u8 os_version[12]; + __u8 driver_name[20]; + __u8 driver_version[32]; + __u8 driver_release_date[20]; + __le32 driver_capabilities; +}; + +/** + * struct mpi3mr_bsg_in_adpinfo - Adapter information request + * data returned by the driver. + * + * @adp_type: Adapter type + * @rsvd1: Reserved + * @pci_dev_id: PCI device ID of the adapter + * @pci_dev_hw_rev: PCI revision of the adapter + * @pci_subsys_dev_id: PCI subsystem device ID of the adapter + * @pci_subsys_ven_id: PCI subsystem vendor ID of the adapter + * @pci_dev: PCI device + * @pci_func: PCI function + * @pci_bus: PCI bus + * @rsvd2: Reserved + * @pci_seg_id: PCI segment ID + * @app_intfc_ver: version of the application interface definition + * @rsvd3: Reserved + * @rsvd4: Reserved + * @rsvd5: Reserved + * @driver_info: Driver Information (Version/Name) + */ +struct mpi3mr_bsg_in_adpinfo { + __u32 adp_type; + __u32 rsvd1; + __u32 pci_dev_id; + __u32 pci_dev_hw_rev; + __u32 pci_subsys_dev_id; + __u32 pci_subsys_ven_id; + __u32 pci_dev:5; + __u32 pci_func:3; + __u32 pci_bus:8; + __u16 rsvd2; + __u32 pci_seg_id; + __u32 app_intfc_ver; + __u8 adp_state; + __u8 rsvd3; + __u16 rsvd4; + __u32 rsvd5[2]; + struct mpi3_driver_info_layout driver_info; +}; + +/** + * struct mpi3mr_bsg_adp_reset - Adapter reset request + * payload data to the driver. + * + * @reset_type: Reset type + * @rsvd1: Reserved + * @rsvd2: Reserved + */ +struct mpi3mr_bsg_adp_reset { + __u8 reset_type; + __u8 rsvd1; + __u16 rsvd2; +}; + +/** + * struct mpi3mr_change_count - Topology change count + * returned by the driver. + * + * @change_count: Topology change count + * @rsvd: Reserved + */ +struct mpi3mr_change_count { + __u16 change_count; + __u16 rsvd; +}; + +/** + * struct mpi3mr_device_map_info - Target device mapping + * information + * + * @handle: Firmware device handle + * @perst_id: Persistent ID assigned by the firmware + * @target_id: Target ID assigned by the driver + * @bus_id: Bus ID assigned by the driver + * @rsvd1: Reserved + * @rsvd2: Reserved + */ +struct mpi3mr_device_map_info { + __u16 handle; + __u16 perst_id; + __u32 target_id; + __u8 bus_id; + __u8 rsvd1; + __u16 rsvd2; +}; + +/** + * struct mpi3mr_all_tgt_info - Target device mapping + * information returned by the driver + * + * @num_devices: The number of devices in driver's inventory + * @rsvd1: Reserved + * @rsvd2: Reserved + * @dmi: Variable length array of mapping information of targets + */ +struct mpi3mr_all_tgt_info { + __u16 num_devices; + __u16 rsvd1; + __u32 rsvd2; + struct mpi3mr_device_map_info dmi[1]; +}; + +/** + * struct mpi3mr_logdata_enable - Number of log data + * entries saved by the driver returned as payload data for + * enable logdata BSG request by the driver. + * + * @max_entries: Number of log data entries cached by the driver + * @rsvd: Reserved + */ +struct mpi3mr_logdata_enable { + __u16 max_entries; + __u16 rsvd; +}; + +/** + * struct mpi3mr_bsg_out_pel_enable - PEL enable request payload + * data to the driver. + * + * @pel_locale: PEL locale to the firmware + * @pel_class: PEL class to the firmware + * @rsvd: Reserved + */ +struct mpi3mr_bsg_out_pel_enable { + __u16 pel_locale; + __u8 pel_class; + __u8 rsvd; +}; + +/** + * struct mpi3mr_logdata_entry - Log data entry cached by the + * driver. + * + * @valid_entry: Is the entry valid + * @rsvd1: Reserved + * @rsvd2: Reserved + * @data: Variable length Log entry data + */ +struct mpi3mr_logdata_entry { + __u8 valid_entry; + __u8 rsvd1; + __u16 rsvd2; + __u8 data[1]; /* Variable length Array */ +}; + +/** + * struct mpi3mr_bsg_in_log_data - Log data entries saved by + * the driver returned as payload data for Get logdata request + * by the driver. + * + * @entry: Variable length Log data entry array + */ +struct mpi3mr_bsg_in_log_data { + struct mpi3mr_logdata_entry entry[1]; +}; + +/** + * struct mpi3mr_hdb_entry - host diag buffer entry. + * + * @buf_type: Buffer type + * @status: Buffer status + * @trigger_type: Trigger type + * @rsvd1: Reserved + * @size: Buffer size + * @rsvd2: Reserved + * @trigger_data: Trigger specific data + * @rsvd3: Reserved + * @rsvd4: Reserved + */ +struct mpi3mr_hdb_entry { + __u8 buf_type; + __u8 status; + __u8 trigger_type; + __u8 rsvd1; + __u16 size; + __u16 rsvd2; + __u64 trigger_data; + __u32 rsvd3; + __u32 rsvd4; +}; + + +/** + * struct mpi3mr_bsg_in_hdb_status - This structure contains + * return data for the BSG request to retrieve the number of host + * diagnostic buffers supported by the driver and their current + * status and additional status specific data if any in forms of + * multiple hdb entries. + * + * @num_hdb_types: Number of host diag buffer types supported + * @rsvd1: Reserved + * @rsvd2: Reserved + * @rsvd3: Reserved + * @entry: Variable length Diag buffer status entry array + */ +struct mpi3mr_bsg_in_hdb_status { + __u8 num_hdb_types; + __u8 rsvd1; + __u16 rsvd2; + __u32 rsvd3; + struct mpi3mr_hdb_entry entry[1]; +}; + +/** + * struct mpi3mr_bsg_out_repost_hdb - Repost host diagnostic + * buffer request payload data to the driver. + * + * @buf_type: Buffer type + * @rsvd1: Reserved + * @rsvd2: Reserved + */ +struct mpi3mr_bsg_out_repost_hdb { + __u8 buf_type; + __u8 rsvd1; + __u16 rsvd2; +}; + +/** + * struct mpi3mr_bsg_out_upload_hdb - Upload host diagnostic + * buffer request payload data to the driver. + * + * @buf_type: Buffer type + * @rsvd1: Reserved + * @rsvd2: Reserved + * @start_offset: Start offset of the buffer from where to copy + * @length: Length of the buffer to copy + */ +struct mpi3mr_bsg_out_upload_hdb { + __u8 buf_type; + __u8 rsvd1; + __u16 rsvd2; + __u32 start_offset; + __u32 length; +}; + +/** + * struct mpi3mr_bsg_out_refresh_hdb_triggers - Refresh host + * diagnostic buffer triggers request payload data to the driver. + * + * @page_type: Page type + * @rsvd1: Reserved + * @rsvd2: Reserved + */ +struct mpi3mr_bsg_out_refresh_hdb_triggers { + __u8 page_type; + __u8 rsvd1; + __u16 rsvd2; +}; +/** + * struct mpi3mr_bsg_drv_cmd - Generic bsg data + * structure for all driver specific requests. + * + * @mrioc_id: Controller ID + * @opcode: Driver specific opcode + * @rsvd1: Reserved + * @rsvd2: Reserved + */ +struct mpi3mr_bsg_drv_cmd { + __u8 mrioc_id; + __u8 opcode; + __u16 rsvd1; + __u32 rsvd2[4]; +}; +/** + * struct mpi3mr_bsg_in_reply_buf - MPI reply buffer returned + * for MPI Passthrough request . + * + * @mpi_reply_type: Type of MPI reply + * @rsvd1: Reserved + * @rsvd2: Reserved + * @reply_buf: Variable Length buffer based on mpirep type + */ +struct mpi3mr_bsg_in_reply_buf { + __u8 mpi_reply_type; + __u8 rsvd1; + __u16 rsvd2; + __u8 reply_buf[1]; +}; + +/** + * struct mpi3mr_buf_entry - User buffer descriptor for MPI + * Passthrough requests. + * + * @buf_type: Buffer type + * @rsvd1: Reserved + * @rsvd2: Reserved + * @buf_len: Buffer length + */ +struct mpi3mr_buf_entry { + __u8 buf_type; + __u8 rsvd1; + __u16 rsvd2; + __u32 buf_len; +}; +/** + * struct mpi3mr_bsg_buf_entry_list - list of user buffer + * descriptor for MPI Passthrough requests. + * + * @num_of_entries: Number of buffer descriptors + * @rsvd1: Reserved + * @rsvd2: Reserved + * @rsvd3: Reserved + * @buf_entry: Variable length array of buffer descriptors + */ +struct mpi3mr_buf_entry_list { + __u8 num_of_entries; + __u8 rsvd1; + __u16 rsvd2; + __u32 rsvd3; + struct mpi3mr_buf_entry buf_entry[1]; +}; +/** + * struct mpi3mr_bsg_mptcmd - Generic bsg data + * structure for all MPI Passthrough requests . + * + * @mrioc_id: Controller ID + * @rsvd1: Reserved + * @timeout: MPI request timeout + * @buf_entry_list: Buffer descriptor list + */ +struct mpi3mr_bsg_mptcmd { + __u8 mrioc_id; + __u8 rsvd1; + __u16 timeout; + __u32 rsvd2; + struct mpi3mr_buf_entry_list buf_entry_list; +}; + +/** + * struct mpi3mr_bsg_packet - Generic bsg data + * structure for all supported requests . + * + * @cmd_type: represents drvrcmd or mptcmd + * @rsvd1: Reserved + * @rsvd2: Reserved + * @drvrcmd: driver request structure + * @mptcmd: mpt request structure + */ +struct mpi3mr_bsg_packet { + __u8 cmd_type; + __u8 rsvd1; + __u16 rsvd2; + __u32 rsvd3; + union { + struct mpi3mr_bsg_drv_cmd drvrcmd; + struct mpi3mr_bsg_mptcmd mptcmd; + } cmd; +}; + +struct mpi3_nvme_encapsulated_request { + __le16 host_tag; + __u8 ioc_use_only02; + __u8 function; + __le16 ioc_use_only04; + __u8 ioc_use_only06; + __u8 msg_flags; + __le16 change_count; + __le16 dev_handle; + __le16 encapsulated_command_length; + __le16 flags; + __le32 data_length; + __le32 reserved14[3]; + __le32 command[]; +}; + +struct mpi3_nvme_encapsulated_error_reply { + __le16 host_tag; + __u8 ioc_use_only02; + __u8 function; + __le16 ioc_use_only04; + __u8 ioc_use_only06; + __u8 msg_flags; + __le16 ioc_use_only08; + __le16 ioc_status; + __le32 ioc_log_info; + __le32 nvme_completion_entry[4]; +}; + +#define MPI3MR_NVME_PRP_SIZE 8 /* PRP size */ +#define MPI3MR_NVME_CMD_PRP1_OFFSET 24 /* PRP1 offset in NVMe cmd */ +#define MPI3MR_NVME_CMD_PRP2_OFFSET 32 /* PRP2 offset in NVMe cmd */ +#define MPI3MR_NVME_CMD_SGL_OFFSET 24 /* SGL offset in NVMe cmd */ +#define MPI3MR_NVME_DATA_FORMAT_PRP 0 +#define MPI3MR_NVME_DATA_FORMAT_SGL1 1 +#define MPI3MR_NVME_DATA_FORMAT_SGL2 2 + +/* MPI3: task management related definitions */ +struct mpi3_scsi_task_mgmt_request { + __le16 host_tag; + __u8 ioc_use_only02; + __u8 function; + __le16 ioc_use_only04; + __u8 ioc_use_only06; + __u8 msg_flags; + __le16 change_count; + __le16 dev_handle; + __le16 task_host_tag; + __u8 task_type; + __u8 reserved0f; + __le16 task_request_queue_id; + __le16 reserved12; + __le32 reserved14; + __u8 lun[8]; +}; + +#define MPI3_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x08) +#define MPI3_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01) +#define MPI3_SCSITASKMGMT_TASKTYPE_ABORT_TASK_SET (0x02) +#define MPI3_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03) +#define MPI3_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05) +#define MPI3_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06) +#define MPI3_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07) +#define MPI3_SCSITASKMGMT_TASKTYPE_CLEAR_ACA (0x08) +#define MPI3_SCSITASKMGMT_TASKTYPE_QUERY_TASK_SET (0x09) +#define MPI3_SCSITASKMGMT_TASKTYPE_QUERY_ASYNC_EVENT (0x0a) +#define MPI3_SCSITASKMGMT_TASKTYPE_I_T_NEXUS_RESET (0x0b) +struct mpi3_scsi_task_mgmt_reply { + __le16 host_tag; + __u8 ioc_use_only02; + __u8 function; + __le16 ioc_use_only04; + __u8 ioc_use_only06; + __u8 msg_flags; + __le16 ioc_use_only08; + __le16 ioc_status; + __le32 ioc_log_info; + __le32 termination_count; + __le32 response_data; + __le32 reserved18; +}; + +#define MPI3_SCSITASKMGMT_RSPCODE_TM_COMPLETE (0x00) +#define MPI3_SCSITASKMGMT_RSPCODE_INVALID_FRAME (0x02) +#define MPI3_SCSITASKMGMT_RSPCODE_TM_FUNCTION_NOT_SUPPORTED (0x04) +#define MPI3_SCSITASKMGMT_RSPCODE_TM_FAILED (0x05) +#define MPI3_SCSITASKMGMT_RSPCODE_TM_SUCCEEDED (0x08) +#define MPI3_SCSITASKMGMT_RSPCODE_TM_INVALID_LUN (0x09) +#define MPI3_SCSITASKMGMT_RSPCODE_TM_OVERLAPPED_TAG (0x0a) +#define MPI3_SCSITASKMGMT_RSPCODE_IO_QUEUED_ON_IOC (0x80) +#define MPI3_SCSITASKMGMT_RSPCODE_TM_NVME_DENIED (0x81) + +/* MPI3: PEL related definitions */ +#define MPI3_PEL_LOCALE_FLAGS_NON_BLOCKING_BOOT_EVENT (0x0200) +#define MPI3_PEL_LOCALE_FLAGS_BLOCKING_BOOT_EVENT (0x0100) +#define MPI3_PEL_LOCALE_FLAGS_PCIE (0x0080) +#define MPI3_PEL_LOCALE_FLAGS_CONFIGURATION (0x0040) +#define MPI3_PEL_LOCALE_FLAGS_CONTROLER (0x0020) +#define MPI3_PEL_LOCALE_FLAGS_SAS (0x0010) +#define MPI3_PEL_LOCALE_FLAGS_EPACK (0x0008) +#define MPI3_PEL_LOCALE_FLAGS_ENCLOSURE (0x0004) +#define MPI3_PEL_LOCALE_FLAGS_PD (0x0002) +#define MPI3_PEL_LOCALE_FLAGS_VD (0x0001) +#define MPI3_PEL_CLASS_DEBUG (0x00) +#define MPI3_PEL_CLASS_PROGRESS (0x01) +#define MPI3_PEL_CLASS_INFORMATIONAL (0x02) +#define MPI3_PEL_CLASS_WARNING (0x03) +#define MPI3_PEL_CLASS_CRITICAL (0x04) +#define MPI3_PEL_CLASS_FATAL (0x05) +#define MPI3_PEL_CLASS_FAULT (0x06) + +/* MPI3: Function definitions */ +#define MPI3_BSG_FUNCTION_MGMT_PASSTHROUGH (0x0a) +#define MPI3_BSG_FUNCTION_SCSI_IO (0x20) +#define MPI3_BSG_FUNCTION_SCSI_TASK_MGMT (0x21) +#define MPI3_BSG_FUNCTION_SMP_PASSTHROUGH (0x22) +#define MPI3_BSG_FUNCTION_NVME_ENCAPSULATED (0x24) + +#endif diff --git a/linux-headers/include/scsi/scsi_bsg_ufs.h b/linux-headers/include/scsi/scsi_bsg_ufs.h index d55f2176dfd..03f2beadf20 100644 --- a/linux-headers/include/scsi/scsi_bsg_ufs.h +++ b/linux-headers/include/scsi/scsi_bsg_ufs.h @@ -8,26 +8,89 @@ #ifndef SCSI_BSG_UFS_H #define SCSI_BSG_UFS_H +#include #include /* * This file intended to be included by both kernel and user space */ #define UFS_CDB_SIZE 16 -#define UPIU_TRANSACTION_UIC_CMD 0x1F /* uic commands are 4DW long, per UFSHCI V2.1 paragraph 5.6.1 */ #define UIC_CMD_SIZE (sizeof(__u32) * 4) +enum ufs_bsg_msg_code { + UPIU_TRANSACTION_UIC_CMD = 0x1F, + UPIU_TRANSACTION_ARPMB_CMD, +}; + +/* UFS RPMB Request Message Types */ +enum ufs_rpmb_op_type { + UFS_RPMB_WRITE_KEY = 0x01, + UFS_RPMB_READ_CNT = 0x02, + UFS_RPMB_WRITE = 0x03, + UFS_RPMB_READ = 0x04, + UFS_RPMB_READ_RESP = 0x05, + UFS_RPMB_SEC_CONF_WRITE = 0x06, + UFS_RPMB_SEC_CONF_READ = 0x07, + UFS_RPMB_PURGE_ENABLE = 0x08, + UFS_RPMB_PURGE_STATUS_READ = 0x09, +}; + /** * struct utp_upiu_header - UPIU header structure * @dword_0: UPIU header DW-0 * @dword_1: UPIU header DW-1 * @dword_2: UPIU header DW-2 + * + * @transaction_code: Type of request or response. See also enum + * upiu_request_transaction and enum upiu_response_transaction. + * @flags: UPIU flags. The meaning of individual flags depends on the + * transaction code. + * @lun: Logical unit number. + * @task_tag: Task tag. + * @iid: Initiator ID. + * @command_set_type: 0 for SCSI command set; 1 for UFS specific. + * @tm_function: Task management function in case of a task management request + * UPIU. + * @query_function: Query function in case of a query request UPIU. + * @response: 0 for success; 1 for failure. + * @status: SCSI status if this is the header of a response to a SCSI command. + * @ehs_length: EHS length in units of 32 bytes. + * @device_information: + * @data_segment_length: data segment length. */ struct utp_upiu_header { - __be32 dword_0; - __be32 dword_1; - __be32 dword_2; + union { + struct { + __be32 dword_0; + __be32 dword_1; + __be32 dword_2; + }; + struct { + __u8 transaction_code; + __u8 flags; + __u8 lun; + __u8 task_tag; +#if defined(__BIG_ENDIAN) + __u8 iid: 4; + __u8 command_set_type: 4; +#elif defined(__LITTLE_ENDIAN) + __u8 command_set_type: 4; + __u8 iid: 4; +#else +#error +#endif + union { + __u8 tm_function; + __u8 query_function; + } __attribute__((packed)); + __u8 response; + __u8 status; + __u8 ehs_length; + __u8 device_information; + __be16 data_segment_length; + }; + }; }; /** @@ -53,6 +116,31 @@ struct utp_upiu_query { __be32 reserved[2]; }; +/** + * struct utp_upiu_query_v4_0 - upiu request buffer structure for + * query request >= UFS 4.0 spec. + * @opcode: command to perform B-0 + * @idn: a value that indicates the particular type of data B-1 + * @index: Index to further identify data B-2 + * @selector: Index to further identify data B-3 + * @osf4: spec field B-5 + * @osf5: spec field B 6,7 + * @osf6: spec field DW 8,9 + * @osf7: spec field DW 10,11 + */ +struct utp_upiu_query_v4_0 { + __u8 opcode; + __u8 idn; + __u8 index; + __u8 selector; + __u8 osf3; + __u8 osf4; + __be16 osf5; + __be32 osf6; + __be32 osf7; + __be32 reserved; +}; + /** * struct utp_upiu_cmd - Command UPIU structure * @data_transfer_len: Data Transfer Length DW-3 @@ -79,6 +167,23 @@ struct utp_upiu_req { }; }; +struct ufs_arpmb_meta { + __be16 req_resp_type; + __u8 nonce[16]; + __be32 write_counter; + __be16 addr_lun; + __be16 block_count; + __be16 result; +} __attribute__((__packed__)); + +struct ufs_ehs { + __u8 length; + __u8 ehs_type; + __be16 ehssub_type; + struct ufs_arpmb_meta meta; + __u8 mac_key[32]; +} __attribute__((__packed__)); + /* request (CDB) structure of the sg_io_v4 */ struct ufs_bsg_request { __u32 msgcode; @@ -95,11 +200,21 @@ struct ufs_bsg_reply { * msg and status fields. The per-msgcode reply structure * will contain valid data. */ - __u32 result; + int result; /* If there was reply_payload, how much was received? */ __u32 reply_payload_rcv_len; struct utp_upiu_req upiu_rsp; }; + +struct ufs_rpmb_request { + struct ufs_bsg_request bsg_request; + struct ufs_ehs ehs_req; +}; + +struct ufs_rpmb_reply { + struct ufs_bsg_reply bsg_reply; + struct ufs_ehs ehs_rsp; +}; #endif /* UFS_BSG_H */ diff --git a/linux-headers/include/scsi/scsi_netlink_fc.h b/linux-headers/include/scsi/scsi_netlink_fc.h index 7535253f1a9..b46e9cbeb00 100644 --- a/linux-headers/include/scsi/scsi_netlink_fc.h +++ b/linux-headers/include/scsi/scsi_netlink_fc.h @@ -35,7 +35,7 @@ * FC Transport Broadcast Event Message : * FC_NL_ASYNC_EVENT * - * Note: if Vendor Unique message, &event_data will be start of + * Note: if Vendor Unique message, event_data_flex will be start of * vendor unique payload, and the length of the payload is * per event_datalen * @@ -50,7 +50,10 @@ struct fc_nl_event { __u16 event_datalen; __u32 event_num; __u32 event_code; - __u32 event_data; + union { + __u32 event_data; + __DECLARE_FLEX_ARRAY(__u8, event_data_flex); + }; } __attribute__((aligned(sizeof(__u64)))); diff --git a/linux-headers/include/sound/asequencer.h b/linux-headers/include/sound/asequencer.h index 2d600320e2a..b96d99f736e 100644 --- a/linux-headers/include/sound/asequencer.h +++ b/linux-headers/include/sound/asequencer.h @@ -3,22 +3,6 @@ * Main header file for the ALSA sequencer * Copyright (c) 1998-1999 by Frank van de Pol * (c) 1998-1999 by Jaroslav Kysela - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #ifndef __SOUND_ASEQUENCER_H #define __SOUND_ASEQUENCER_H @@ -26,7 +10,7 @@ #include /** version of the sequencer */ -#define SNDRV_SEQ_VERSION SNDRV_PROTOCOL_VERSION(1, 0, 2) +#define SNDRV_SEQ_VERSION SNDRV_PROTOCOL_VERSION(1, 0, 3) /** * definition of sequencer event types @@ -190,6 +174,7 @@ struct snd_seq_connect { #define SNDRV_SEQ_PRIORITY_HIGH (1<<4) /* event should be processed before others */ #define SNDRV_SEQ_PRIORITY_MASK (1<<4) +#define SNDRV_SEQ_EVENT_UMP (1<<5) /* event holds a UMP packet */ /* note event */ struct snd_seq_ev_note { @@ -268,6 +253,19 @@ struct snd_seq_ev_quote { struct snd_seq_event *event; /* quoted event */ } __attribute__((packed)); +union snd_seq_event_data { /* event data... */ + struct snd_seq_ev_note note; + struct snd_seq_ev_ctrl control; + struct snd_seq_ev_raw8 raw8; + struct snd_seq_ev_raw32 raw32; + struct snd_seq_ev_ext ext; + struct snd_seq_ev_queue_control queue; + union snd_seq_timestamp time; + struct snd_seq_addr addr; + struct snd_seq_connect connect; + struct snd_seq_result result; + struct snd_seq_ev_quote quote; +}; /* sequencer event */ struct snd_seq_event { @@ -278,25 +276,27 @@ struct snd_seq_event { unsigned char queue; /* schedule queue */ union snd_seq_timestamp time; /* schedule time */ - struct snd_seq_addr source; /* source address */ struct snd_seq_addr dest; /* destination address */ - union { /* event data... */ - struct snd_seq_ev_note note; - struct snd_seq_ev_ctrl control; - struct snd_seq_ev_raw8 raw8; - struct snd_seq_ev_raw32 raw32; - struct snd_seq_ev_ext ext; - struct snd_seq_ev_queue_control queue; - union snd_seq_timestamp time; - struct snd_seq_addr addr; - struct snd_seq_connect connect; - struct snd_seq_result result; - struct snd_seq_ev_quote quote; - } data; + union snd_seq_event_data data; }; + /* (compatible) event for UMP-capable clients */ +struct snd_seq_ump_event { + snd_seq_event_type_t type; /* event type */ + unsigned char flags; /* event flags */ + char tag; + unsigned char queue; /* schedule queue */ + union snd_seq_timestamp time; /* schedule time */ + struct snd_seq_addr source; /* source address */ + struct snd_seq_addr dest; /* destination address */ + + union { + union snd_seq_event_data data; + unsigned int ump[4]; + }; +}; /* * bounce event - stored as variable size data @@ -344,10 +344,11 @@ typedef int __bitwise snd_seq_client_type_t; #define KERNEL_CLIENT ((snd_seq_client_type_t) 2) /* event filter flags */ -#define SNDRV_SEQ_FILTER_BROADCAST (1<<0) /* accept broadcast messages */ -#define SNDRV_SEQ_FILTER_MULTICAST (1<<1) /* accept multicast messages */ -#define SNDRV_SEQ_FILTER_BOUNCE (1<<2) /* accept bounce event in error */ -#define SNDRV_SEQ_FILTER_USE_EVENT (1<<31) /* use event filter */ +#define SNDRV_SEQ_FILTER_BROADCAST (1U<<0) /* accept broadcast messages */ +#define SNDRV_SEQ_FILTER_MULTICAST (1U<<1) /* accept multicast messages */ +#define SNDRV_SEQ_FILTER_BOUNCE (1U<<2) /* accept bounce event in error */ +#define SNDRV_SEQ_FILTER_NO_CONVERT (1U<<30) /* don't convert UMP events */ +#define SNDRV_SEQ_FILTER_USE_EVENT (1U<<31) /* use event filter */ struct snd_seq_client_info { int client; /* client number to inquire */ @@ -360,9 +361,18 @@ struct snd_seq_client_info { int event_lost; /* number of lost events */ int card; /* RO: card number[kernel] */ int pid; /* RO: pid[user] */ - char reserved[56]; /* for future use */ + unsigned int midi_version; /* MIDI version */ + unsigned int group_filter; /* UMP group filter bitmap + * (bit 0 = groupless messages, + * bit 1-16 = messages for groups 1-16) + */ + char reserved[48]; /* for future use */ }; +/* MIDI version numbers in client info */ +#define SNDRV_SEQ_CLIENT_LEGACY_MIDI 0 /* Legacy client */ +#define SNDRV_SEQ_CLIENT_UMP_MIDI_1_0 1 /* UMP MIDI 1.0 */ +#define SNDRV_SEQ_CLIENT_UMP_MIDI_2_0 2 /* UMP MIDI 2.0 */ /* client pool size */ struct snd_seq_client_pool { @@ -422,6 +432,8 @@ struct snd_seq_remove_events { #define SNDRV_SEQ_PORT_CAP_SUBS_READ (1<<5) /* allow read subscription */ #define SNDRV_SEQ_PORT_CAP_SUBS_WRITE (1<<6) /* allow write subscription */ #define SNDRV_SEQ_PORT_CAP_NO_EXPORT (1<<7) /* routing not allowed */ +#define SNDRV_SEQ_PORT_CAP_INACTIVE (1<<8) /* inactive port */ +#define SNDRV_SEQ_PORT_CAP_UMP_ENDPOINT (1<<9) /* MIDI 2.0 UMP Endpoint port */ /* port type */ #define SNDRV_SEQ_PORT_TYPE_SPECIFIC (1<<0) /* hardware specific */ @@ -431,6 +443,7 @@ struct snd_seq_remove_events { #define SNDRV_SEQ_PORT_TYPE_MIDI_XG (1<<4) /* XG compatible device */ #define SNDRV_SEQ_PORT_TYPE_MIDI_MT32 (1<<5) /* MT-32 compatible device */ #define SNDRV_SEQ_PORT_TYPE_MIDI_GM2 (1<<6) /* General MIDI 2 compatible device */ +#define SNDRV_SEQ_PORT_TYPE_MIDI_UMP (1<<7) /* UMP */ /* other standards...*/ #define SNDRV_SEQ_PORT_TYPE_SYNTH (1<<10) /* Synth device (no MIDI compatible - direct wavetable) */ @@ -448,6 +461,12 @@ struct snd_seq_remove_events { #define SNDRV_SEQ_PORT_FLG_TIMESTAMP (1<<1) #define SNDRV_SEQ_PORT_FLG_TIME_REAL (1<<2) +/* port direction */ +#define SNDRV_SEQ_PORT_DIR_UNKNOWN 0 +#define SNDRV_SEQ_PORT_DIR_INPUT 1 +#define SNDRV_SEQ_PORT_DIR_OUTPUT 2 +#define SNDRV_SEQ_PORT_DIR_BIDIRECTION 3 + struct snd_seq_port_info { struct snd_seq_addr addr; /* client/port numbers */ char name[64]; /* port name */ @@ -464,7 +483,9 @@ struct snd_seq_port_info { void *kernel; /* reserved for kernel use (must be NULL) */ unsigned int flags; /* misc. conditioning */ unsigned char time_queue; /* queue # for timestamping */ - char reserved[59]; /* for future use */ + unsigned char direction; /* port usage direction (r/w/bidir) */ + unsigned char ump_group; /* 0 = UMP EP (no conversion), 1-16 = UMP group number */ + char reserved[57]; /* for future use */ }; @@ -568,6 +589,18 @@ struct snd_seq_query_subs { char reserved[64]; /* for future use */ }; +/* + * UMP-specific information + */ +/* type of UMP info query */ +#define SNDRV_SEQ_CLIENT_UMP_INFO_ENDPOINT 0 +#define SNDRV_SEQ_CLIENT_UMP_INFO_BLOCK 1 + +struct snd_seq_client_ump_info { + int client; /* client number to inquire/set */ + int type; /* type to inquire/set */ + unsigned char info[512]; /* info (either UMP ep or block info) */ +} __attribute__((packed)); /* * IOCTL commands @@ -577,9 +610,12 @@ struct snd_seq_query_subs { #define SNDRV_SEQ_IOCTL_CLIENT_ID _IOR ('S', 0x01, int) #define SNDRV_SEQ_IOCTL_SYSTEM_INFO _IOWR('S', 0x02, struct snd_seq_system_info) #define SNDRV_SEQ_IOCTL_RUNNING_MODE _IOWR('S', 0x03, struct snd_seq_running_info) +#define SNDRV_SEQ_IOCTL_USER_PVERSION _IOW('S', 0x04, int) #define SNDRV_SEQ_IOCTL_GET_CLIENT_INFO _IOWR('S', 0x10, struct snd_seq_client_info) #define SNDRV_SEQ_IOCTL_SET_CLIENT_INFO _IOW ('S', 0x11, struct snd_seq_client_info) +#define SNDRV_SEQ_IOCTL_GET_CLIENT_UMP_INFO _IOWR('S', 0x12, struct snd_seq_client_ump_info) +#define SNDRV_SEQ_IOCTL_SET_CLIENT_UMP_INFO _IOWR('S', 0x13, struct snd_seq_client_ump_info) #define SNDRV_SEQ_IOCTL_CREATE_PORT _IOWR('S', 0x20, struct snd_seq_port_info) #define SNDRV_SEQ_IOCTL_DELETE_PORT _IOW ('S', 0x21, struct snd_seq_port_info) diff --git a/linux-headers/include/sound/asoc.h b/linux-headers/include/sound/asoc.h index 7150f61078b..3868fa96672 100644 --- a/linux-headers/include/sound/asoc.h +++ b/linux-headers/include/sound/asoc.h @@ -5,10 +5,6 @@ * Copyright (C) 2012 Texas Instruments Inc. * Copyright (C) 2015 Intel Corporation. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Simple file API to load FW that includes mixers, coefficients, DAPM graphs, * algorithms, equalisers, DAIs, widgets etc. */ @@ -170,16 +166,22 @@ #define SND_SOC_TPLG_LNK_FLGBIT_VOICE_WAKEUP (1 << 3) /* DAI topology BCLK parameter - * For the backwards capability, by default codec is bclk master + * For the backwards capability, by default codec is bclk provider */ -#define SND_SOC_TPLG_BCLK_CM 0 /* codec is bclk master */ -#define SND_SOC_TPLG_BCLK_CS 1 /* codec is bclk slave */ +#define SND_SOC_TPLG_BCLK_CP 0 /* codec is bclk provider */ +#define SND_SOC_TPLG_BCLK_CC 1 /* codec is bclk consumer */ +/* keep previous definitions for compatibility */ +#define SND_SOC_TPLG_BCLK_CM SND_SOC_TPLG_BCLK_CP +#define SND_SOC_TPLG_BCLK_CS SND_SOC_TPLG_BCLK_CC /* DAI topology FSYNC parameter - * For the backwards capability, by default codec is fsync master + * For the backwards capability, by default codec is fsync provider */ -#define SND_SOC_TPLG_FSYNC_CM 0 /* codec is fsync master */ -#define SND_SOC_TPLG_FSYNC_CS 1 /* codec is fsync slave */ +#define SND_SOC_TPLG_FSYNC_CP 0 /* codec is fsync provider */ +#define SND_SOC_TPLG_FSYNC_CC 1 /* codec is fsync consumer */ +/* keep previous definitions for compatibility */ +#define SND_SOC_TPLG_FSYNC_CM SND_SOC_TPLG_FSYNC_CP +#define SND_SOC_TPLG_FSYNC_CS SND_SOC_TPLG_FSYNC_CC /* * Block Header. @@ -220,9 +222,9 @@ struct snd_soc_tplg_vendor_array { __le32 type; /* SND_SOC_TPLG_TUPLE_TYPE_ */ __le32 num_elems; /* number of elements in array */ union { - struct snd_soc_tplg_vendor_uuid_elem uuid[0]; - struct snd_soc_tplg_vendor_value_elem value[0]; - struct snd_soc_tplg_vendor_string_elem string[0]; + __DECLARE_FLEX_ARRAY(struct snd_soc_tplg_vendor_uuid_elem, uuid); + __DECLARE_FLEX_ARRAY(struct snd_soc_tplg_vendor_value_elem, value); + __DECLARE_FLEX_ARRAY(struct snd_soc_tplg_vendor_string_elem, string); }; } __attribute__((packed)); @@ -234,8 +236,8 @@ struct snd_soc_tplg_vendor_array { struct snd_soc_tplg_private { __le32 size; /* in bytes of private data */ union { - char data[0]; - struct snd_soc_tplg_vendor_array array[0]; + __DECLARE_FLEX_ARRAY(char, data); + __DECLARE_FLEX_ARRAY(struct snd_soc_tplg_vendor_array, array); }; } __attribute__((packed)); @@ -336,8 +338,8 @@ struct snd_soc_tplg_hw_config { __u8 clock_gated; /* SND_SOC_TPLG_DAI_CLK_GATE_ value */ __u8 invert_bclk; /* 1 for inverted BCLK, 0 for normal */ __u8 invert_fsync; /* 1 for inverted frame clock, 0 for normal */ - __u8 bclk_master; /* SND_SOC_TPLG_BCLK_ value */ - __u8 fsync_master; /* SND_SOC_TPLG_FSYNC_ value */ + __u8 bclk_provider; /* SND_SOC_TPLG_BCLK_ value */ + __u8 fsync_provider; /* SND_SOC_TPLG_FSYNC_ value */ __u8 mclk_direction; /* SND_SOC_TPLG_MCLK_ value */ __le16 reserved; /* for 32bit alignment */ __le32 mclk_rate; /* MCLK or SYSCLK freqency in Hz */ diff --git a/linux-headers/include/sound/asound.h b/linux-headers/include/sound/asound.h index ec610c27041..08e63dac8da 100644 --- a/linux-headers/include/sound/asound.h +++ b/linux-headers/include/sound/asound.h @@ -3,22 +3,6 @@ * Advanced Linux Sound Architecture - ALSA - Driver * Copyright (c) 1994-2003 by Jaroslav Kysela , * Abramo Bagnara - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #ifndef __SOUND_ASOUND_H @@ -54,8 +38,10 @@ * * ****************************************************************************/ +#define AES_IEC958_STATUS_SIZE 24 + struct snd_aes_iec958 { - unsigned char status[24]; /* AES/IEC958 channel status bits */ + unsigned char status[AES_IEC958_STATUS_SIZE]; /* AES/IEC958 channel status bits */ unsigned char subcode[147]; /* AES/IEC958 subcode bits */ unsigned char pad; /* nothing */ unsigned char dig_subframe[4]; /* AES/IEC958 subframe bits */ @@ -200,6 +186,11 @@ typedef int __bitwise snd_pcm_format_t; #define SNDRV_PCM_FORMAT_S24_BE ((snd_pcm_format_t) 7) /* low three bytes */ #define SNDRV_PCM_FORMAT_U24_LE ((snd_pcm_format_t) 8) /* low three bytes */ #define SNDRV_PCM_FORMAT_U24_BE ((snd_pcm_format_t) 9) /* low three bytes */ +/* + * For S32/U32 formats, 'msbits' hardware parameter is often used to deliver information about the + * available bit count in most significant bit. It's for the case of so-called 'left-justified' or + * `right-padding` sample which has less width than 32 bit. + */ #define SNDRV_PCM_FORMAT_S32_LE ((snd_pcm_format_t) 10) #define SNDRV_PCM_FORMAT_S32_BE ((snd_pcm_format_t) 11) #define SNDRV_PCM_FORMAT_U32_LE ((snd_pcm_format_t) 12) @@ -281,6 +272,7 @@ typedef int __bitwise snd_pcm_subformat_t; #define SNDRV_PCM_INFO_DOUBLE 0x00000004 /* Double buffering needed for PCM start/stop */ #define SNDRV_PCM_INFO_BATCH 0x00000010 /* double buffering */ #define SNDRV_PCM_INFO_SYNC_APPLPTR 0x00000020 /* need the explicit sync of appl_ptr update */ +#define SNDRV_PCM_INFO_PERFECT_DRAIN 0x00000040 /* silencing at the end of stream is not required */ #define SNDRV_PCM_INFO_INTERLEAVED 0x00000100 /* channels are interleaved */ #define SNDRV_PCM_INFO_NONINTERLEAVED 0x00000200 /* channels are not interleaved */ #define SNDRV_PCM_INFO_COMPLEX 0x00000400 /* complex frame organization (mmap only) */ @@ -297,7 +289,8 @@ typedef int __bitwise snd_pcm_subformat_t; #define SNDRV_PCM_INFO_HAS_LINK_ABSOLUTE_ATIME 0x02000000 /* report absolute hardware link audio time, not reset on startup */ #define SNDRV_PCM_INFO_HAS_LINK_ESTIMATED_ATIME 0x04000000 /* report estimated link audio time */ #define SNDRV_PCM_INFO_HAS_LINK_SYNCHRONIZED_ATIME 0x08000000 /* report synchronized audio/system time */ - +#define SNDRV_PCM_INFO_EXPLICIT_SYNC 0x10000000 /* needs explicit sync of pointers and data */ +#define SNDRV_PCM_INFO_NO_REWINDS 0x20000000 /* hardware can only support monotonic changes of appl_ptr */ #define SNDRV_PCM_INFO_DRAIN_TRIGGER 0x40000000 /* internal kernel flag - trigger in drain */ #define SNDRV_PCM_INFO_FIFO_IN_FRAMES 0x80000000 /* internal kernel flag - FIFO size is in frames */ @@ -389,6 +382,9 @@ typedef int snd_pcm_hw_param_t; #define SNDRV_PCM_HW_PARAMS_NORESAMPLE (1<<0) /* avoid rate resampling */ #define SNDRV_PCM_HW_PARAMS_EXPORT_BUFFER (1<<1) /* export buffer */ #define SNDRV_PCM_HW_PARAMS_NO_PERIOD_WAKEUP (1<<2) /* disable period wakeups */ +#define SNDRV_PCM_HW_PARAMS_NO_DRAIN_SILENCE (1<<3) /* suppress drain with the filling + * of the silence samples + */ struct snd_interval { unsigned int min, max; @@ -435,9 +431,14 @@ struct snd_pcm_sw_params { snd_pcm_uframes_t avail_min; /* min avail frames for wakeup */ snd_pcm_uframes_t xfer_align; /* obsolete: xfer size need to be a multiple */ snd_pcm_uframes_t start_threshold; /* min hw_avail frames for automatic start */ - snd_pcm_uframes_t stop_threshold; /* min avail frames for automatic stop */ - snd_pcm_uframes_t silence_threshold; /* min distance from noise for silence filling */ - snd_pcm_uframes_t silence_size; /* silence block size */ + /* + * The following two thresholds alleviate playback buffer underruns; when + * hw_avail drops below the threshold, the respective action is triggered: + */ + snd_pcm_uframes_t stop_threshold; /* - stop playback */ + snd_pcm_uframes_t silence_threshold; /* - pre-fill buffer with silence */ + snd_pcm_uframes_t silence_size; /* max size of silence pre-fill; when >= boundary, + * fill played area with silence immediately */ snd_pcm_uframes_t boundary; /* pointers wrap point */ unsigned int proto; /* protocol version */ unsigned int tstamp_type; /* timestamp type (req. proto >= 2.0.12) */ @@ -570,7 +571,8 @@ struct __snd_pcm_mmap_status64 { struct __snd_pcm_mmap_control64 { __pad_before_uframe __pad1; snd_pcm_uframes_t appl_ptr; /* RW: appl ptr (0...boundary-1) */ - __pad_before_uframe __pad2; + __pad_before_uframe __pad2; // This should be __pad_after_uframe, but binary + // backwards compatibility constraints prevent a fix. __pad_before_uframe __pad3; snd_pcm_uframes_t avail_min; /* RW: min available frames for wakeup */ @@ -702,7 +704,7 @@ enum { * Raw MIDI section - /dev/snd/midi?? */ -#define SNDRV_RAWMIDI_VERSION SNDRV_PROTOCOL_VERSION(2, 0, 1) +#define SNDRV_RAWMIDI_VERSION SNDRV_PROTOCOL_VERSION(2, 0, 4) enum { SNDRV_RAWMIDI_STREAM_OUTPUT = 0, @@ -713,6 +715,7 @@ enum { #define SNDRV_RAWMIDI_INFO_OUTPUT 0x00000001 #define SNDRV_RAWMIDI_INFO_INPUT 0x00000002 #define SNDRV_RAWMIDI_INFO_DUPLEX 0x00000004 +#define SNDRV_RAWMIDI_INFO_UMP 0x00000008 struct snd_rawmidi_info { unsigned int device; /* RO/WR (control): device number */ @@ -728,12 +731,38 @@ struct snd_rawmidi_info { unsigned char reserved[64]; /* reserved for future use */ }; +#define SNDRV_RAWMIDI_MODE_FRAMING_MASK (7<<0) +#define SNDRV_RAWMIDI_MODE_FRAMING_SHIFT 0 +#define SNDRV_RAWMIDI_MODE_FRAMING_NONE (0<<0) +#define SNDRV_RAWMIDI_MODE_FRAMING_TSTAMP (1<<0) +#define SNDRV_RAWMIDI_MODE_CLOCK_MASK (7<<3) +#define SNDRV_RAWMIDI_MODE_CLOCK_SHIFT 3 +#define SNDRV_RAWMIDI_MODE_CLOCK_NONE (0<<3) +#define SNDRV_RAWMIDI_MODE_CLOCK_REALTIME (1<<3) +#define SNDRV_RAWMIDI_MODE_CLOCK_MONOTONIC (2<<3) +#define SNDRV_RAWMIDI_MODE_CLOCK_MONOTONIC_RAW (3<<3) + +#define SNDRV_RAWMIDI_FRAMING_DATA_LENGTH 16 + +struct snd_rawmidi_framing_tstamp { + /* For now, frame_type is always 0. Midi 2.0 is expected to add new + * types here. Applications are expected to skip unknown frame types. + */ + __u8 frame_type; + __u8 length; /* number of valid bytes in data field */ + __u8 reserved[2]; + __u32 tv_nsec; /* nanoseconds */ + __u64 tv_sec; /* seconds */ + __u8 data[SNDRV_RAWMIDI_FRAMING_DATA_LENGTH]; +} __attribute__((packed)); + struct snd_rawmidi_params { int stream; size_t buffer_size; /* queue size in bytes */ size_t avail_min; /* minimum avail bytes for wakeup */ unsigned int no_active_sensing: 1; /* do not send active sensing byte in close() */ - unsigned char reserved[16]; /* reserved for future use */ + unsigned int mode; /* For input data only, frame incoming data */ + unsigned char reserved[12]; /* reserved for future use */ }; struct snd_rawmidi_status { @@ -745,12 +774,82 @@ struct snd_rawmidi_status { unsigned char reserved[16]; /* reserved for future use */ }; +/* UMP EP info flags */ +#define SNDRV_UMP_EP_INFO_STATIC_BLOCKS 0x01 + +/* UMP EP Protocol / JRTS capability bits */ +#define SNDRV_UMP_EP_INFO_PROTO_MIDI_MASK 0x0300 +#define SNDRV_UMP_EP_INFO_PROTO_MIDI1 0x0100 /* MIDI 1.0 */ +#define SNDRV_UMP_EP_INFO_PROTO_MIDI2 0x0200 /* MIDI 2.0 */ +#define SNDRV_UMP_EP_INFO_PROTO_JRTS_MASK 0x0003 +#define SNDRV_UMP_EP_INFO_PROTO_JRTS_TX 0x0001 /* JRTS Transmit */ +#define SNDRV_UMP_EP_INFO_PROTO_JRTS_RX 0x0002 /* JRTS Receive */ + +/* UMP Endpoint information */ +struct snd_ump_endpoint_info { + int card; /* card number */ + int device; /* device number */ + unsigned int flags; /* additional info */ + unsigned int protocol_caps; /* protocol capabilities */ + unsigned int protocol; /* current protocol */ + unsigned int num_blocks; /* # of function blocks */ + unsigned short version; /* UMP major/minor version */ + unsigned short family_id; /* MIDI device family ID */ + unsigned short model_id; /* MIDI family model ID */ + unsigned int manufacturer_id; /* MIDI manufacturer ID */ + unsigned char sw_revision[4]; /* software revision */ + unsigned short padding; + unsigned char name[128]; /* endpoint name string */ + unsigned char product_id[128]; /* unique product id string */ + unsigned char reserved[32]; +} __attribute__((packed)); + +/* UMP direction */ +#define SNDRV_UMP_DIR_INPUT 0x01 +#define SNDRV_UMP_DIR_OUTPUT 0x02 +#define SNDRV_UMP_DIR_BIDIRECTION 0x03 + +/* UMP block info flags */ +#define SNDRV_UMP_BLOCK_IS_MIDI1 (1U << 0) /* MIDI 1.0 port w/o restrict */ +#define SNDRV_UMP_BLOCK_IS_LOWSPEED (1U << 1) /* 31.25Kbps B/W MIDI1 port */ + +/* UMP block user-interface hint */ +#define SNDRV_UMP_BLOCK_UI_HINT_UNKNOWN 0x00 +#define SNDRV_UMP_BLOCK_UI_HINT_RECEIVER 0x01 +#define SNDRV_UMP_BLOCK_UI_HINT_SENDER 0x02 +#define SNDRV_UMP_BLOCK_UI_HINT_BOTH 0x03 + +/* UMP groups and blocks */ +#define SNDRV_UMP_MAX_GROUPS 16 +#define SNDRV_UMP_MAX_BLOCKS 32 + +/* UMP Block information */ +struct snd_ump_block_info { + int card; /* card number */ + int device; /* device number */ + unsigned char block_id; /* block ID (R/W) */ + unsigned char direction; /* UMP direction */ + unsigned char active; /* Activeness */ + unsigned char first_group; /* first group ID */ + unsigned char num_groups; /* number of groups */ + unsigned char midi_ci_version; /* MIDI-CI support version */ + unsigned char sysex8_streams; /* max number of sysex8 streams */ + unsigned char ui_hint; /* user interface hint */ + unsigned int flags; /* various info flags */ + unsigned char name[128]; /* block name string */ + unsigned char reserved[32]; +} __attribute__((packed)); + #define SNDRV_RAWMIDI_IOCTL_PVERSION _IOR('W', 0x00, int) #define SNDRV_RAWMIDI_IOCTL_INFO _IOR('W', 0x01, struct snd_rawmidi_info) +#define SNDRV_RAWMIDI_IOCTL_USER_PVERSION _IOW('W', 0x02, int) #define SNDRV_RAWMIDI_IOCTL_PARAMS _IOWR('W', 0x10, struct snd_rawmidi_params) #define SNDRV_RAWMIDI_IOCTL_STATUS _IOWR('W', 0x20, struct snd_rawmidi_status) #define SNDRV_RAWMIDI_IOCTL_DROP _IOW('W', 0x30, int) #define SNDRV_RAWMIDI_IOCTL_DRAIN _IOW('W', 0x31, int) +/* Additional ioctls for UMP rawmidi devices */ +#define SNDRV_UMP_IOCTL_ENDPOINT_INFO _IOR('W', 0x40, struct snd_ump_endpoint_info) +#define SNDRV_UMP_IOCTL_BLOCK_INFO _IOR('W', 0x41, struct snd_ump_block_info) /* * Timer section - /dev/snd/timer @@ -922,7 +1021,7 @@ struct snd_timer_tread { * * ****************************************************************************/ -#define SNDRV_CTL_VERSION SNDRV_PROTOCOL_VERSION(2, 0, 8) +#define SNDRV_CTL_VERSION SNDRV_PROTOCOL_VERSION(2, 0, 9) struct snd_ctl_card_info { int card; /* card number */ @@ -960,7 +1059,7 @@ typedef int __bitwise snd_ctl_elem_iface_t; #define SNDRV_CTL_ELEM_ACCESS_WRITE (1<<1) #define SNDRV_CTL_ELEM_ACCESS_READWRITE (SNDRV_CTL_ELEM_ACCESS_READ|SNDRV_CTL_ELEM_ACCESS_WRITE) #define SNDRV_CTL_ELEM_ACCESS_VOLATILE (1<<2) /* control value may be changed without a notification */ -// (1 << 3) is unused. +/* (1 << 3) is unused. */ #define SNDRV_CTL_ELEM_ACCESS_TLV_READ (1<<4) /* TLV read is possible */ #define SNDRV_CTL_ELEM_ACCESS_TLV_WRITE (1<<5) /* TLV write is possible */ #define SNDRV_CTL_ELEM_ACCESS_TLV_READWRITE (SNDRV_CTL_ELEM_ACCESS_TLV_READ|SNDRV_CTL_ELEM_ACCESS_TLV_WRITE) @@ -1057,7 +1156,7 @@ struct snd_ctl_elem_value { struct snd_ctl_tlv { unsigned int numid; /* control element numeric identification */ unsigned int length; /* in bytes aligned to 4 */ - unsigned int tlv[0]; /* first TLV */ + unsigned int tlv[]; /* first TLV */ }; #define SNDRV_CTL_IOCTL_PVERSION _IOR('U', 0x00, int) @@ -1083,6 +1182,9 @@ struct snd_ctl_tlv { #define SNDRV_CTL_IOCTL_RAWMIDI_NEXT_DEVICE _IOWR('U', 0x40, int) #define SNDRV_CTL_IOCTL_RAWMIDI_INFO _IOWR('U', 0x41, struct snd_rawmidi_info) #define SNDRV_CTL_IOCTL_RAWMIDI_PREFER_SUBDEVICE _IOW('U', 0x42, int) +#define SNDRV_CTL_IOCTL_UMP_NEXT_DEVICE _IOWR('U', 0x43, int) +#define SNDRV_CTL_IOCTL_UMP_ENDPOINT_INFO _IOWR('U', 0x44, struct snd_ump_endpoint_info) +#define SNDRV_CTL_IOCTL_UMP_BLOCK_INFO _IOWR('U', 0x45, struct snd_ump_block_info) #define SNDRV_CTL_IOCTL_POWER _IOWR('U', 0xd0, int) #define SNDRV_CTL_IOCTL_POWER_STATE _IOR('U', 0xd1, int) diff --git a/linux-headers/include/sound/asound_fm.h b/linux-headers/include/sound/asound_fm.h index 8471f404ff0..25ec5e38af5 100644 --- a/linux-headers/include/sound/asound_fm.h +++ b/linux-headers/include/sound/asound_fm.h @@ -10,21 +10,6 @@ * 4Front Technologies * * Direct FM control - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #define SNDRV_DM_FM_MODE_OPL2 0x00 diff --git a/linux-headers/include/sound/compress_offload.h b/linux-headers/include/sound/compress_offload.h index 9555f31c842..d185957f3fe 100644 --- a/linux-headers/include/sound/compress_offload.h +++ b/linux-headers/include/sound/compress_offload.h @@ -5,23 +5,6 @@ * Copyright (C) 2011 Intel Corporation * Authors: Vinod Koul * Pierre-Louis Bossart - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * */ #ifndef __COMPRESS_OFFLOAD_H #define __COMPRESS_OFFLOAD_H @@ -123,7 +106,7 @@ struct snd_compr_codec_caps { } __attribute__((packed, aligned(4))); /** - * enum sndrv_compress_encoder + * enum sndrv_compress_encoder - encoder metadata key * @SNDRV_COMPRESS_ENCODER_PADDING: no of samples appended by the encoder at the * end of the track * @SNDRV_COMPRESS_ENCODER_DELAY: no of samples inserted by the encoder at the diff --git a/linux-headers/include/sound/compress_params.h b/linux-headers/include/sound/compress_params.h index 79b14389ae4..ddc77322d57 100644 --- a/linux-headers/include/sound/compress_params.h +++ b/linux-headers/include/sound/compress_params.h @@ -7,47 +7,13 @@ * Authors: Pierre-Louis Bossart * Vinod Koul * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - * * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * * The definitions in this file are derived from the OpenMAX AL version 1.1 - * and OpenMAX IL v 1.1.2 header files which contain the copyright notice below. + * and OpenMAX IL v 1.1.2 header files which contain the copyright notice below + * and are licensed under the MIT license. * * Copyright (c) 2007-2010 The Khronos Group Inc. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and/or associated documentation files (the - * "Materials "), to deal in the Materials without restriction, including - * without limitation the rights to use, copy, modify, merge, publish, - * distribute, sublicense, and/or sell copies of the Materials, and to - * permit persons to whom the Materials are furnished to do so, subject to - * the following conditions: - * - * The above copyright notice and this permission notice shall be included - * in all copies or substantial portions of the Materials. - * - * THE MATERIALS ARE PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. - * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY - * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, - * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE - * MATERIALS OR THE USE OR OTHER DEALINGS IN THE MATERIALS. - * */ #ifndef __SND_COMPRESS_PARAMS_H #define __SND_COMPRESS_PARAMS_H @@ -250,7 +216,7 @@ struct snd_enc_wma { /** - * struct snd_enc_vorbis + * struct snd_enc_vorbis - Vorbis encoder parameters * @quality: Sets encoding quality to n, between -1 (low) and 10 (high). * In the default mode of operation, the quality level is 3. * Normal quality range is 0 - 10. @@ -279,7 +245,7 @@ struct snd_enc_vorbis { /** - * struct snd_enc_real + * struct snd_enc_real - RealAudio encoder parameters * @quant_bits: number of coupling quantization bits in the stream * @start_region: coupling start region in the stream * @num_regions: number of regions value @@ -294,7 +260,7 @@ struct snd_enc_real { } __attribute__((packed, aligned(4))); /** - * struct snd_enc_flac + * struct snd_enc_flac - FLAC encoder parameters * @num: serial number, valid only for OGG formats * needs to be set by application * @gain: Add replay gain tags diff --git a/linux-headers/include/sound/emu10k1.h b/linux-headers/include/sound/emu10k1.h index 78d794c03cd..8ef6525218b 100644 --- a/linux-headers/include/sound/emu10k1.h +++ b/linux-headers/include/sound/emu10k1.h @@ -3,22 +3,6 @@ * Copyright (c) by Jaroslav Kysela , * Creative Labs, Inc. * Definitions for EMU10K1 (SB Live!) chips - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #ifndef __SOUND_EMU10K1_H #define __SOUND_EMU10K1_H @@ -31,9 +15,6 @@ * ---- FX8010 ---- */ -#define EMU10K1_CARD_CREATIVE 0x00000000 -#define EMU10K1_CARD_EMUAPS 0x00000001 - #define EMU10K1_FX8010_PCM_COUNT 8 /* @@ -62,6 +43,19 @@ #define iINTERP 0x0e /* R = A + (X * (Y - A) >> 31) ; saturation */ #define iSKIP 0x0f /* R = A (cc_reg), X (count), Y (cc_test) */ +#define LOWORD_OPX_MASK 0x000ffc00 /* Instruction operand X */ +#define LOWORD_OPY_MASK 0x000003ff /* Instruction operand Y */ +#define HIWORD_OPCODE_MASK 0x00f00000 /* Instruction opcode */ +#define HIWORD_RESULT_MASK 0x000ffc00 /* Instruction result */ +#define HIWORD_OPA_MASK 0x000003ff /* Instruction operand A */ + +/* Audigy Soundcards have a different instruction format */ +#define A_LOWORD_OPX_MASK 0x007ff000 +#define A_LOWORD_OPY_MASK 0x000007ff +#define A_HIWORD_OPCODE_MASK 0x0f000000 +#define A_HIWORD_RESULT_MASK 0x007ff000 +#define A_HIWORD_OPA_MASK 0x000007ff + /* GPRs */ #define FXBUS(x) (0x00 + (x)) /* x = 0x00 - 0x0f */ #define EXTIN(x) (0x10 + (x)) /* x = 0x00 - 0x0f */ @@ -69,6 +63,16 @@ #define FXBUS2(x) (0x30 + (x)) /* x = 0x00 - 0x0f copies of fx buses for capture -> FXWC high 16 bits */ /* NB: 0x31 and 0x32 are shared with Center/LFE on SB live 5.1 */ +#define A_FXBUS(x) (0x00 + (x)) /* x = 0x00 - 0x3f FX buses */ +#define A_EXTIN(x) (0x40 + (x)) /* x = 0x00 - 0x0f physical ins */ +#define A_P16VIN(x) (0x50 + (x)) /* x = 0x00 - 0x0f p16v ins (A2 only) "EMU32 inputs" */ +#define A_EXTOUT(x) (0x60 + (x)) /* x = 0x00 - 0x1f physical outs -> A_FXWC1 0x79-7f unknown */ +#define A_FXBUS2(x) (0x80 + (x)) /* x = 0x00 - 0x1f extra outs used for EFX capture -> A_FXWC2 */ +#define A_EMU32OUTH(x) (0xa0 + (x)) /* x = 0x00 - 0x0f "EMU32_OUT_10 - _1F" */ +#define A_EMU32OUTL(x) (0xb0 + (x)) /* x = 0x00 - 0x0f "EMU32_OUT_01 - _0F" */ +#define A3_EMU32IN(x) (0x160 + (x)) /* x = 0x00 - 0x1f "EMU32_IN_00 - _1F" - Only when .device = 0x0008 */ +#define A3_EMU32OUT(x) (0x1E0 + (x)) /* x = 0x00 - 0x1f "EMU32_OUT_00 - _1F" - Only when .device = 0x0008 */ + #define C_00000000 0x40 #define C_00000001 0x41 #define C_00000002 0x42 @@ -97,12 +101,66 @@ #define GPR_NOISE1 0x59 /* noise source */ #define GPR_IRQ 0x5a /* IRQ register */ #define GPR_DBAC 0x5b /* TRAM Delay Base Address Counter */ + +/* Audigy constants */ +#define A_C_00000000 0xc0 +#define A_C_00000001 0xc1 +#define A_C_00000002 0xc2 +#define A_C_00000003 0xc3 +#define A_C_00000004 0xc4 +#define A_C_00000008 0xc5 +#define A_C_00000010 0xc6 +#define A_C_00000020 0xc7 +#define A_C_00000100 0xc8 +#define A_C_00010000 0xc9 +#define A_C_00000800 0xca +#define A_C_10000000 0xcb +#define A_C_20000000 0xcc +#define A_C_40000000 0xcd +#define A_C_80000000 0xce +#define A_C_7fffffff 0xcf +#define A_C_ffffffff 0xd0 +#define A_C_fffffffe 0xd1 +#define A_C_c0000000 0xd2 +#define A_C_4f1bbcdc 0xd3 +#define A_C_5a7ef9db 0xd4 +#define A_C_00100000 0xd5 +#define A_GPR_ACCU 0xd6 /* ACCUM, accumulator */ +#define A_GPR_COND 0xd7 /* CCR, condition register */ +#define A_GPR_NOISE0 0xd8 /* noise source */ +#define A_GPR_NOISE1 0xd9 /* noise source */ +#define A_GPR_IRQ 0xda /* IRQ register */ +#define A_GPR_DBAC 0xdb /* TRAM Delay Base Address Counter - internal */ +#define A_GPR_DBACE 0xde /* TRAM Delay Base Address Counter - external */ + +/* Each FX general purpose register is 32 bits in length, all bits are used */ +#define FXGPREGBASE 0x100 /* FX general purpose registers base */ +#define A_FXGPREGBASE 0x400 /* Audigy GPRs, 0x400 to 0x5ff */ + +#define A_TANKMEMCTLREGBASE 0x100 /* Tank memory control registers base - only for Audigy */ +#define A_TANKMEMCTLREG_MASK 0x1f /* only 5 bits used - only for Audigy */ + +/* Tank audio data is logarithmically compressed down to 16 bits before writing to TRAM and is */ +/* decompressed back to 20 bits on a read. There are a total of 160 locations, the last 32 */ +/* locations are for external TRAM. */ +#define TANKMEMDATAREGBASE 0x200 /* Tank memory data registers base */ +#define TANKMEMDATAREG_MASK 0x000fffff /* 20 bit tank audio data field */ + +/* Combined address field and memory opcode or flag field. 160 locations, last 32 are external */ +#define TANKMEMADDRREGBASE 0x300 /* Tank memory address registers base */ +#define TANKMEMADDRREG_ADDR_MASK 0x000fffff /* 20 bit tank address field */ +#define TANKMEMADDRREG_CLEAR 0x00800000 /* Clear tank memory */ +#define TANKMEMADDRREG_ALIGN 0x00400000 /* Align read or write relative to tank access */ +#define TANKMEMADDRREG_WRITE 0x00200000 /* Write to tank memory */ +#define TANKMEMADDRREG_READ 0x00100000 /* Read from tank memory */ + #define GPR(x) (FXGPREGBASE + (x)) /* free GPRs: x = 0x00 - 0xff */ #define ITRAM_DATA(x) (TANKMEMDATAREGBASE + 0x00 + (x)) /* x = 0x00 - 0x7f */ #define ETRAM_DATA(x) (TANKMEMDATAREGBASE + 0x80 + (x)) /* x = 0x00 - 0x1f */ #define ITRAM_ADDR(x) (TANKMEMADDRREGBASE + 0x00 + (x)) /* x = 0x00 - 0x7f */ #define ETRAM_ADDR(x) (TANKMEMADDRREGBASE + 0x80 + (x)) /* x = 0x00 - 0x1f */ +#define A_GPR(x) (A_FXGPREGBASE + (x)) #define A_ITRAM_DATA(x) (TANKMEMDATAREGBASE + 0x00 + (x)) /* x = 0x00 - 0xbf */ #define A_ETRAM_DATA(x) (TANKMEMDATAREGBASE + 0xc0 + (x)) /* x = 0x00 - 0x3f */ #define A_ITRAM_ADDR(x) (TANKMEMADDRREGBASE + 0x00 + (x)) /* x = 0x00 - 0xbf */ @@ -110,17 +168,6 @@ #define A_ITRAM_CTL(x) (A_TANKMEMCTLREGBASE + 0x00 + (x)) /* x = 0x00 - 0xbf */ #define A_ETRAM_CTL(x) (A_TANKMEMCTLREGBASE + 0xc0 + (x)) /* x = 0x00 - 0x3f */ -#define A_FXBUS(x) (0x00 + (x)) /* x = 0x00 - 0x3f FX buses */ -#define A_EXTIN(x) (0x40 + (x)) /* x = 0x00 - 0x0f physical ins */ -#define A_P16VIN(x) (0x50 + (x)) /* x = 0x00 - 0x0f p16v ins (A2 only) "EMU32 inputs" */ -#define A_EXTOUT(x) (0x60 + (x)) /* x = 0x00 - 0x1f physical outs -> A_FXWC1 0x79-7f unknown */ -#define A_FXBUS2(x) (0x80 + (x)) /* x = 0x00 - 0x1f extra outs used for EFX capture -> A_FXWC2 */ -#define A_EMU32OUTH(x) (0xa0 + (x)) /* x = 0x00 - 0x0f "EMU32_OUT_10 - _1F" - ??? */ -#define A_EMU32OUTL(x) (0xb0 + (x)) /* x = 0x00 - 0x0f "EMU32_OUT_1 - _F" - ??? */ -#define A3_EMU32IN(x) (0x160 + (x)) /* x = 0x00 - 0x3f "EMU32_IN_00 - _3F" - Only when .device = 0x0008 */ -#define A3_EMU32OUT(x) (0x1E0 + (x)) /* x = 0x00 - 0x0f "EMU32_OUT_00 - _3F" - Only when .device = 0x0008 */ -#define A_GPR(x) (A_FXGPREGBASE + (x)) - /* cc_reg constants */ #define CC_REG_NORMALIZED C_00000001 #define CC_REG_BORROW C_00000002 @@ -129,7 +176,17 @@ #define CC_REG_SATURATE C_00000010 #define CC_REG_NONZERO C_00000100 +#define A_CC_REG_NORMALIZED A_C_00000001 +#define A_CC_REG_BORROW A_C_00000002 +#define A_CC_REG_MINUS A_C_00000004 +#define A_CC_REG_ZERO A_C_00000008 +#define A_CC_REG_SATURATE A_C_00000010 +#define A_CC_REG_NONZERO A_C_00000100 + /* FX buses */ +// These are arbitrary mappings; our DSP code simply expects +// the config files to route the channels this way. +// The numbers are documented in {audigy,sb-live}-mixer.rst. #define FXBUS_PCM_LEFT 0x00 #define FXBUS_PCM_RIGHT 0x01 #define FXBUS_PCM_LEFT_REAR 0x02 @@ -219,38 +276,7 @@ #define A_EXTOUT_ADC_CAP_R 0x17 /* right */ #define A_EXTOUT_MIC_CAP 0x18 /* Mic capture buffer */ -/* Audigy constants */ -#define A_C_00000000 0xc0 -#define A_C_00000001 0xc1 -#define A_C_00000002 0xc2 -#define A_C_00000003 0xc3 -#define A_C_00000004 0xc4 -#define A_C_00000008 0xc5 -#define A_C_00000010 0xc6 -#define A_C_00000020 0xc7 -#define A_C_00000100 0xc8 -#define A_C_00010000 0xc9 -#define A_C_00000800 0xca -#define A_C_10000000 0xcb -#define A_C_20000000 0xcc -#define A_C_40000000 0xcd -#define A_C_80000000 0xce -#define A_C_7fffffff 0xcf -#define A_C_ffffffff 0xd0 -#define A_C_fffffffe 0xd1 -#define A_C_c0000000 0xd2 -#define A_C_4f1bbcdc 0xd3 -#define A_C_5a7ef9db 0xd4 -#define A_C_00100000 0xd5 -#define A_GPR_ACCU 0xd6 /* ACCUM, accumulator */ -#define A_GPR_COND 0xd7 /* CCR, condition register */ -#define A_GPR_NOISE0 0xd8 /* noise source */ -#define A_GPR_NOISE1 0xd9 /* noise source */ -#define A_GPR_IRQ 0xda /* IRQ register */ -#define A_GPR_DBAC 0xdb /* TRAM Delay Base Address Counter - internal */ -#define A_GPR_DBACE 0xde /* TRAM Delay Base Address Counter - external */ - -/* definitions for debug register */ +/* Definitions for debug register. Note that these are for emu10k1 ONLY. */ #define EMU10K1_DBG_ZC 0x80000000 /* zero tram counter */ #define EMU10K1_DBG_SATURATION_OCCURED 0x02000000 /* saturation control */ #define EMU10K1_DBG_SATURATION_ADDR 0x01ff0000 /* saturation address */ @@ -259,12 +285,14 @@ #define EMU10K1_DBG_CONDITION_CODE 0x00003e00 /* condition code */ #define EMU10K1_DBG_SINGLE_STEP_ADDR 0x000001ff /* single step address */ -/* tank memory address line */ -#define TANKMEMADDRREG_ADDR_MASK 0x000fffff /* 20 bit tank address field */ -#define TANKMEMADDRREG_CLEAR 0x00800000 /* Clear tank memory */ -#define TANKMEMADDRREG_ALIGN 0x00400000 /* Align read or write relative to tank access */ -#define TANKMEMADDRREG_WRITE 0x00200000 /* Write to tank memory */ -#define TANKMEMADDRREG_READ 0x00100000 /* Read from tank memory */ +/* Definitions for emu10k2 debug register. */ +#define A_DBG_ZC 0x40000000 /* zero tram counter */ +#define A_DBG_SATURATION_OCCURED 0x20000000 +#define A_DBG_SATURATION_ADDR 0x0ffc0000 +#define A_DBG_SINGLE_STEP 0x00020000 /* Set to zero to start dsp */ +#define A_DBG_STEP 0x00010000 +#define A_DBG_CONDITION_CODE 0x0000f800 +#define A_DBG_STEP_ADDR 0x000003ff struct snd_emu10k1_fx8010_info { unsigned int internal_tram_size; /* in samples */ @@ -280,6 +308,8 @@ struct snd_emu10k1_fx8010_info { #define EMU10K1_GPR_TRANSLATION_BASS 2 #define EMU10K1_GPR_TRANSLATION_TREBLE 3 #define EMU10K1_GPR_TRANSLATION_ONOFF 4 +#define EMU10K1_GPR_TRANSLATION_NEGATE 5 +#define EMU10K1_GPR_TRANSLATION_NEG_TABLE100 6 enum emu10k1_ctl_elem_iface { EMU10K1_CTL_ELEM_IFACE_MIXER = 2, /* virtual mixer device */ @@ -300,9 +330,9 @@ struct snd_emu10k1_fx8010_control_gpr { unsigned int vcount; /* visible count */ unsigned int count; /* count of GPR (1..16) */ unsigned short gpr[32]; /* GPR number(s) */ - unsigned int value[32]; /* initial values */ - unsigned int min; /* minimum range */ - unsigned int max; /* maximum range */ + int value[32]; /* initial values */ + int min; /* minimum range */ + int max; /* maximum range */ unsigned int translation; /* translation type (EMU10K1_GPR_TRANSLATION*) */ const unsigned int *tlv; }; diff --git a/linux-headers/include/sound/firewire.h b/linux-headers/include/sound/firewire.h index df949d234c8..73a8e19e7d2 100644 --- a/linux-headers/include/sound/firewire.h +++ b/linux-headers/include/sound/firewire.h @@ -13,6 +13,8 @@ #define SNDRV_FIREWIRE_EVENT_DIGI00X_MESSAGE 0x746e736c #define SNDRV_FIREWIRE_EVENT_MOTU_NOTIFICATION 0x64776479 #define SNDRV_FIREWIRE_EVENT_TASCAM_CONTROL 0x7473636d +#define SNDRV_FIREWIRE_EVENT_MOTU_REGISTER_DSP_CHANGE 0x4d545244 +#define SNDRV_FIREWIRE_EVENT_FF400_MESSAGE 0x4f6c6761 struct snd_firewire_event_common { unsigned int type; /* SNDRV_FIREWIRE_EVENT_xxx */ @@ -37,11 +39,11 @@ struct snd_efw_transaction { __be32 category; __be32 command; __be32 status; - __be32 params[0]; + __be32 params[]; }; struct snd_firewire_event_efw_response { unsigned int type; - __be32 response[0]; /* some responses */ + __be32 response[]; /* some responses */ }; struct snd_firewire_event_digi00x_message { @@ -62,7 +64,37 @@ struct snd_firewire_tascam_change { struct snd_firewire_event_tascam_control { unsigned int type; - struct snd_firewire_tascam_change changes[0]; + struct snd_firewire_tascam_change changes[]; +}; + +struct snd_firewire_event_motu_register_dsp_change { + unsigned int type; + __u32 count; /* The number of changes. */ + __u32 changes[]; /* Encoded event for change of register DSP. */ +}; + +/** + * struct snd_firewire_event_ff400_message - the container for message from Fireface 400 when + * operating hardware knob. + * + * @type: Fixed to SNDRV_FIREWIRE_EVENT_FF400_MESSAGE. + * @message_count: The number of messages. + * @messages.message: The messages expressing hardware knob operation. + * @messages.tstamp: The isochronous cycle at which the request subaction of asynchronous + * transaction was sent to deliver the message. It has 16 bit unsigned integer + * value. The higher 3 bits of value expresses the lower three bits of second + * field in the format of CYCLE_TIME, up to 7. The rest 13 bits expresses cycle + * field up to 7999. + * + * The structure expresses message transmitted by Fireface 400 when operating hardware knob. + */ +struct snd_firewire_event_ff400_message { + unsigned int type; + unsigned int message_count; + struct { + __u32 message; + __u32 tstamp; + } messages[]; }; union snd_firewire_event { @@ -73,6 +105,8 @@ union snd_firewire_event { struct snd_firewire_event_digi00x_message digi00x_message; struct snd_firewire_event_tascam_control tascam_control; struct snd_firewire_event_motu_notification motu_notification; + struct snd_firewire_event_motu_register_dsp_change motu_register_dsp_change; + struct snd_firewire_event_ff400_message ff400_message; }; @@ -80,6 +114,9 @@ union snd_firewire_event { #define SNDRV_FIREWIRE_IOCTL_LOCK _IO('H', 0xf9) #define SNDRV_FIREWIRE_IOCTL_UNLOCK _IO('H', 0xfa) #define SNDRV_FIREWIRE_IOCTL_TASCAM_STATE _IOR('H', 0xfb, struct snd_firewire_tascam_state) +#define SNDRV_FIREWIRE_IOCTL_MOTU_REGISTER_DSP_METER _IOR('H', 0xfc, struct snd_firewire_motu_register_dsp_meter) +#define SNDRV_FIREWIRE_IOCTL_MOTU_COMMAND_DSP_METER _IOR('H', 0xfd, struct snd_firewire_motu_command_dsp_meter) +#define SNDRV_FIREWIRE_IOCTL_MOTU_REGISTER_DSP_PARAMETER _IOR('H', 0xfe, struct snd_firewire_motu_register_dsp_parameter) #define SNDRV_FIREWIRE_TYPE_DICE 1 #define SNDRV_FIREWIRE_TYPE_FIREWORKS 2 @@ -108,4 +145,139 @@ struct snd_firewire_tascam_state { __be32 data[SNDRV_FIREWIRE_TASCAM_STATE_COUNT]; }; +/* + * In below MOTU models, software is allowed to control their DSP by accessing to registers. + * - 828mk2 + * - 896hd + * - Traveler + * - 8 pre + * - Ultralite + * - 4 pre + * - Audio Express + * + * On the other hand, the status of DSP is split into specific messages included in the sequence of + * isochronous packet. ALSA firewire-motu driver gathers the messages and allow userspace applications + * to read it via ioctl. In 828mk2, 896hd, and Traveler, hardware meter for all of physical inputs + * are put into the message, while one pair of physical outputs is selected. The selection is done by + * LSB one byte in asynchronous write quadlet transaction to 0x'ffff'f000'0b2c. + * + * I note that V3HD/V4HD uses asynchronous transaction for the purpose. The destination address is + * registered to 0x'ffff'f000'0b38 and '0b3c by asynchronous write quadlet request. The size of + * message differs between 23 and 51 quadlets. For the case, the number of mixer bus can be extended + * up to 12. + */ + +#define SNDRV_FIREWIRE_MOTU_REGISTER_DSP_METER_INPUT_COUNT 24 +#define SNDRV_FIREWIRE_MOTU_REGISTER_DSP_METER_OUTPUT_COUNT 24 +#define SNDRV_FIREWIRE_MOTU_REGISTER_DSP_METER_COUNT \ + (SNDRV_FIREWIRE_MOTU_REGISTER_DSP_METER_INPUT_COUNT + SNDRV_FIREWIRE_MOTU_REGISTER_DSP_METER_OUTPUT_COUNT) + +/** + * struct snd_firewire_motu_register_dsp_meter - the container for meter information in DSP + * controlled by register access + * @data: Signal level meters. The mapping between position and input/output channel is + * model-dependent. + * + * The structure expresses the part of DSP status for hardware meter. The u8 storage includes linear + * value for audio signal level between 0x00 and 0x7f. + */ +struct snd_firewire_motu_register_dsp_meter { + __u8 data[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_METER_COUNT]; +}; + +#define SNDRV_FIREWIRE_MOTU_REGISTER_DSP_MIXER_COUNT 4 +#define SNDRV_FIREWIRE_MOTU_REGISTER_DSP_MIXER_SRC_COUNT 20 +#define SNDRV_FIREWIRE_MOTU_REGISTER_DSP_INPUT_COUNT 10 +#define SNDRV_FIREWIRE_MOTU_REGISTER_DSP_ALIGNED_INPUT_COUNT (SNDRV_FIREWIRE_MOTU_REGISTER_DSP_INPUT_COUNT + 2) + +/** + * snd_firewire_motu_register_dsp_parameter - the container for parameters of DSP controlled + * by register access. + * @mixer.source.gain: The gain of source to mixer. + * @mixer.source.pan: The L/R balance of source to mixer. + * @mixer.source.flag: The flag of source to mixer, including mute, solo. + * @mixer.source.paired_balance: The L/R balance of paired source to mixer, only for 4 pre and + * Audio Express. + * @mixer.source.paired_width: The width of paired source to mixer, only for 4 pre and + * Audio Express. + * @mixer.output.paired_volume: The volume of paired output from mixer. + * @mixer.output.paired_flag: The flag of paired output from mixer. + * @output.main_paired_volume: The volume of paired main output. + * @output.hp_paired_volume: The volume of paired hp output. + * @output.hp_paired_assignment: The source assigned to paired hp output. + * @output.reserved: Padding for 32 bit alignment for future extension. + * @line_input.boost_flag: The flags of boost for line inputs, only for 828mk2 and Traveler. + * @line_input.nominal_level_flag: The flags of nominal level for line inputs, only for 828mk2 and + * Traveler. + * @line_input.reserved: Padding for 32 bit alignment for future extension. + * @input.gain_and_invert: The value including gain and invert for input, only for Ultralite, 4 pre + * and Audio Express. + * @input.flag: The flag of input; e.g. jack detection, phantom power, and pad, only for Ultralite, + * 4 pre and Audio express. + * @reserved: Padding so that the size of structure is kept to 512 byte, but for future extension. + * + * The structure expresses the set of parameters for DSP controlled by register access. + */ +struct snd_firewire_motu_register_dsp_parameter { + struct { + struct { + __u8 gain[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_MIXER_SRC_COUNT]; + __u8 pan[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_MIXER_SRC_COUNT]; + __u8 flag[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_MIXER_SRC_COUNT]; + __u8 paired_balance[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_MIXER_SRC_COUNT]; + __u8 paired_width[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_MIXER_SRC_COUNT]; + } source[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_MIXER_COUNT]; + struct { + __u8 paired_volume[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_MIXER_COUNT]; + __u8 paired_flag[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_MIXER_COUNT]; + } output; + } mixer; + struct { + __u8 main_paired_volume; + __u8 hp_paired_volume; + __u8 hp_paired_assignment; + __u8 reserved[5]; + } output; + struct { + __u8 boost_flag; + __u8 nominal_level_flag; + __u8 reserved[6]; + } line_input; + struct { + __u8 gain_and_invert[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_ALIGNED_INPUT_COUNT]; + __u8 flag[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_ALIGNED_INPUT_COUNT]; + } input; + __u8 reserved[64]; +}; + +/* + * In below MOTU models, software is allowed to control their DSP by command in frame of + * asynchronous transaction to 0x'ffff'0001'0000: + * + * - 828 mk3 (FireWire only and Hybrid) + * - 896 mk3 (FireWire only and Hybrid) + * - Ultralite mk3 (FireWire only and Hybrid) + * - Traveler mk3 + * - Track 16 + * + * On the other hand, the states of hardware meter is split into specific messages included in the + * sequence of isochronous packet. ALSA firewire-motu driver gathers the message and allow userspace + * application to read it via ioctl. + */ + +#define SNDRV_FIREWIRE_MOTU_COMMAND_DSP_METER_COUNT 400 + +/** + * struct snd_firewire_motu_command_dsp_meter - the container for meter information in DSP + * controlled by command + * @data: Signal level meters. The mapping between position and signal channel is model-dependent. + * + * The structure expresses the part of DSP status for hardware meter. The 32 bit storage is + * estimated to include IEEE 764 32 bit single precision floating point (binary32) value. It is + * expected to be linear value (not logarithm) for audio signal level between 0.0 and +1.0. + */ +struct snd_firewire_motu_command_dsp_meter { + float data[SNDRV_FIREWIRE_MOTU_COMMAND_DSP_METER_COUNT]; +}; + #endif /* _SOUND_FIREWIRE_H_INCLUDED */ diff --git a/linux-headers/include/sound/hdsp.h b/linux-headers/include/sound/hdsp.h index b8df62b60f4..0961954658d 100644 --- a/linux-headers/include/sound/hdsp.h +++ b/linux-headers/include/sound/hdsp.h @@ -4,20 +4,6 @@ /* * Copyright (C) 2003 Thomas Charbonnel (thomas@undata.org) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifdef __linux__ diff --git a/linux-headers/include/sound/hdspm.h b/linux-headers/include/sound/hdspm.h index 14af3d00ea3..7043bb3d435 100644 --- a/linux-headers/include/sound/hdspm.h +++ b/linux-headers/include/sound/hdspm.h @@ -4,21 +4,6 @@ /* * Copyright (C) 2003 Winfried Ritsch (IEM) * based on hdsp.h from Thomas Charbonnel (thomas@undata.org) - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifdef __linux__ diff --git a/linux-headers/include/sound/intel/avs/tokens.h b/linux-headers/include/sound/intel/avs/tokens.h new file mode 100644 index 00000000000..4ffe546aa40 --- /dev/null +++ b/linux-headers/include/sound/intel/avs/tokens.h @@ -0,0 +1,130 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Copyright(c) 2021 Intel Corporation. All rights reserved. + * + * Authors: Cezary Rojewski + * Amadeusz Slawinski + */ + +#ifndef __UAPI_SOUND_INTEL_AVS_TOKENS_H +#define __UAPI_SOUND_INTEL_AVS_TOKENS_H + +enum avs_tplg_token { + /* struct avs_tplg */ + AVS_TKN_MANIFEST_NAME_STRING = 1, + AVS_TKN_MANIFEST_VERSION_U32 = 2, + AVS_TKN_MANIFEST_NUM_LIBRARIES_U32 = 3, + AVS_TKN_MANIFEST_NUM_AFMTS_U32 = 4, + AVS_TKN_MANIFEST_NUM_MODCFGS_BASE_U32 = 5, + AVS_TKN_MANIFEST_NUM_MODCFGS_EXT_U32 = 6, + AVS_TKN_MANIFEST_NUM_PPLCFGS_U32 = 7, + AVS_TKN_MANIFEST_NUM_BINDINGS_U32 = 8, + + /* struct avs_tplg_library */ + AVS_TKN_LIBRARY_ID_U32 = 101, + AVS_TKN_LIBRARY_NAME_STRING = 102, + + /* struct avs_audio_format */ + AVS_TKN_AFMT_ID_U32 = 201, + AVS_TKN_AFMT_SAMPLE_RATE_U32 = 202, + AVS_TKN_AFMT_BIT_DEPTH_U32 = 203, + AVS_TKN_AFMT_CHANNEL_MAP_U32 = 204, + AVS_TKN_AFMT_CHANNEL_CFG_U32 = 205, + AVS_TKN_AFMT_INTERLEAVING_U32 = 206, + AVS_TKN_AFMT_NUM_CHANNELS_U32 = 207, + AVS_TKN_AFMT_VALID_BIT_DEPTH_U32 = 208, + AVS_TKN_AFMT_SAMPLE_TYPE_U32 = 209, + + /* struct avs_tplg_modcfg_base */ + AVS_TKN_MODCFG_BASE_ID_U32 = 301, + AVS_TKN_MODCFG_BASE_CPC_U32 = 302, + AVS_TKN_MODCFG_BASE_IBS_U32 = 303, + AVS_TKN_MODCFG_BASE_OBS_U32 = 304, + AVS_TKN_MODCFG_BASE_PAGES_U32 = 305, + + /* struct avs_tplg_modcfg_ext */ + AVS_TKN_MODCFG_EXT_ID_U32 = 401, + AVS_TKN_MODCFG_EXT_TYPE_UUID = 402, + AVS_TKN_MODCFG_CPR_OUT_AFMT_ID_U32 = 403, + AVS_TKN_MODCFG_CPR_FEATURE_MASK_U32 = 404, + AVS_TKN_MODCFG_CPR_DMA_TYPE_U32 = 405, + AVS_TKN_MODCFG_CPR_DMABUFF_SIZE_U32 = 406, + AVS_TKN_MODCFG_CPR_VINDEX_U8 = 407, + AVS_TKN_MODCFG_CPR_BLOB_FMT_ID_U32 = 408, + AVS_TKN_MODCFG_MICSEL_OUT_AFMT_ID_U32 = 409, + AVS_TKN_MODCFG_INTELWOV_CPC_LP_MODE_U32 = 410, + AVS_TKN_MODCFG_SRC_OUT_FREQ_U32 = 411, + AVS_TKN_MODCFG_MUX_REF_AFMT_ID_U32 = 412, + AVS_TKN_MODCFG_MUX_OUT_AFMT_ID_U32 = 413, + AVS_TKN_MODCFG_AEC_REF_AFMT_ID_U32 = 414, + AVS_TKN_MODCFG_AEC_OUT_AFMT_ID_U32 = 415, + AVS_TKN_MODCFG_AEC_CPC_LP_MODE_U32 = 416, + AVS_TKN_MODCFG_ASRC_OUT_FREQ_U32 = 417, + AVS_TKN_MODCFG_ASRC_MODE_U8 = 418, + AVS_TKN_MODCFG_ASRC_DISABLE_JITTER_U8 = 419, + AVS_TKN_MODCFG_UPDOWN_MIX_OUT_CHAN_CFG_U32 = 420, + AVS_TKN_MODCFG_UPDOWN_MIX_COEFF_SELECT_U32 = 421, + AVS_TKN_MODCFG_UPDOWN_MIX_COEFF_0_S32 = 422, + AVS_TKN_MODCFG_UPDOWN_MIX_COEFF_1_S32 = 423, + AVS_TKN_MODCFG_UPDOWN_MIX_COEFF_2_S32 = 424, + AVS_TKN_MODCFG_UPDOWN_MIX_COEFF_3_S32 = 425, + AVS_TKN_MODCFG_UPDOWN_MIX_COEFF_4_S32 = 426, + AVS_TKN_MODCFG_UPDOWN_MIX_COEFF_5_S32 = 427, + AVS_TKN_MODCFG_UPDOWN_MIX_COEFF_6_S32 = 428, + AVS_TKN_MODCFG_UPDOWN_MIX_COEFF_7_S32 = 429, + AVS_TKN_MODCFG_UPDOWN_MIX_CHAN_MAP_U32 = 430, + AVS_TKN_MODCFG_EXT_NUM_INPUT_PINS_U16 = 431, + AVS_TKN_MODCFG_EXT_NUM_OUTPUT_PINS_U16 = 432, + + /* struct avs_tplg_pplcfg */ + AVS_TKN_PPLCFG_ID_U32 = 1401, + AVS_TKN_PPLCFG_REQ_SIZE_U16 = 1402, + AVS_TKN_PPLCFG_PRIORITY_U8 = 1403, + AVS_TKN_PPLCFG_LOW_POWER_BOOL = 1404, + AVS_TKN_PPLCFG_ATTRIBUTES_U16 = 1405, + AVS_TKN_PPLCFG_TRIGGER_U32 = 1406, + + /* struct avs_tplg_binding */ + AVS_TKN_BINDING_ID_U32 = 1501, + AVS_TKN_BINDING_TARGET_TPLG_NAME_STRING = 1502, + AVS_TKN_BINDING_TARGET_PATH_TMPL_ID_U32 = 1503, + AVS_TKN_BINDING_TARGET_PPL_ID_U32 = 1504, + AVS_TKN_BINDING_TARGET_MOD_ID_U32 = 1505, + AVS_TKN_BINDING_TARGET_MOD_PIN_U8 = 1506, + AVS_TKN_BINDING_MOD_ID_U32 = 1507, + AVS_TKN_BINDING_MOD_PIN_U8 = 1508, + AVS_TKN_BINDING_IS_SINK_U8 = 1509, + + /* struct avs_tplg_pipeline */ + AVS_TKN_PPL_ID_U32 = 1601, + AVS_TKN_PPL_PPLCFG_ID_U32 = 1602, + AVS_TKN_PPL_NUM_BINDING_IDS_U32 = 1603, + AVS_TKN_PPL_BINDING_ID_U32 = 1604, + + /* struct avs_tplg_module */ + AVS_TKN_MOD_ID_U32 = 1701, + AVS_TKN_MOD_MODCFG_BASE_ID_U32 = 1702, + AVS_TKN_MOD_IN_AFMT_ID_U32 = 1703, + AVS_TKN_MOD_CORE_ID_U8 = 1704, + AVS_TKN_MOD_PROC_DOMAIN_U8 = 1705, + AVS_TKN_MOD_MODCFG_EXT_ID_U32 = 1706, + AVS_TKN_MOD_KCONTROL_ID_U32 = 1707, + + /* struct avs_tplg_path_template */ + AVS_TKN_PATH_TMPL_ID_U32 = 1801, + + /* struct avs_tplg_path */ + AVS_TKN_PATH_ID_U32 = 1901, + AVS_TKN_PATH_FE_FMT_ID_U32 = 1902, + AVS_TKN_PATH_BE_FMT_ID_U32 = 1903, + + /* struct avs_tplg_pin_format */ + AVS_TKN_PIN_FMT_INDEX_U32 = 2201, + AVS_TKN_PIN_FMT_IOBS_U32 = 2202, + AVS_TKN_PIN_FMT_AFMT_ID_U32 = 2203, + + /* struct avs_tplg_kcontrol */ + AVS_TKN_KCONTROL_ID_U32 = 2301, +}; + +#endif diff --git a/linux-headers/include/sound/sb16_csp.h b/linux-headers/include/sound/sb16_csp.h index 55db0b44a8b..d8b4452e6fb 100644 --- a/linux-headers/include/sound/sb16_csp.h +++ b/linux-headers/include/sound/sb16_csp.h @@ -4,21 +4,6 @@ * Takashi Iwai * * SB16ASP/AWE32 CSP control - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #ifndef __SOUND_SB16_CSP_H #define __SOUND_SB16_CSP_H diff --git a/linux-headers/include/sound/sfnt_info.h b/linux-headers/include/sound/sfnt_info.h index c9a810a6ef4..f2b5e13fb5a 100644 --- a/linux-headers/include/sound/sfnt_info.h +++ b/linux-headers/include/sound/sfnt_info.h @@ -6,21 +6,6 @@ * Patch record compatible with AWE driver on OSS * * Copyright (C) 1999-2000 Takashi Iwai - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #include diff --git a/linux-headers/include/sound/skl-tplg-interface.h b/linux-headers/include/sound/skl-tplg-interface.h index 5574ecbdbde..e9027738d9e 100644 --- a/linux-headers/include/sound/skl-tplg-interface.h +++ b/linux-headers/include/sound/skl-tplg-interface.h @@ -66,7 +66,8 @@ enum skl_ch_cfg { SKL_CH_CFG_DUAL_MONO = 9, SKL_CH_CFG_I2S_DUAL_STEREO_0 = 10, SKL_CH_CFG_I2S_DUAL_STEREO_1 = 11, - SKL_CH_CFG_4_CHANNEL = 12, + SKL_CH_CFG_7_1 = 12, + SKL_CH_CFG_4_CHANNEL = SKL_CH_CFG_7_1, SKL_CH_CFG_INVALID }; @@ -151,7 +152,7 @@ struct skl_dfw_algo_data { __u32 rsvd:30; __u32 param_id; __u32 max; - char params[0]; + char params[]; } __attribute__((packed)); enum skl_tkn_dir { diff --git a/linux-headers/include/sound/snd_ar_tokens.h b/linux-headers/include/sound/snd_ar_tokens.h new file mode 100644 index 00000000000..b9b9093b439 --- /dev/null +++ b/linux-headers/include/sound/snd_ar_tokens.h @@ -0,0 +1,235 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ + +#ifndef __SND_AR_TOKENS_H__ +#define __SND_AR_TOKENS_H__ + +#define APM_SUB_GRAPH_PERF_MODE_LOW_POWER 0x1 +#define APM_SUB_GRAPH_PERF_MODE_LOW_LATENCY 0x2 + +#define APM_SUB_GRAPH_DIRECTION_TX 0x1 +#define APM_SUB_GRAPH_DIRECTION_RX 0x2 + +/** Scenario ID Audio Playback */ +#define APM_SUB_GRAPH_SID_AUDIO_PLAYBACK 0x1 +/* Scenario ID Audio Record */ +#define APM_SUB_GRAPH_SID_AUDIO_RECORD 0x2 +/* Scenario ID Voice call. */ +#define APM_SUB_GRAPH_SID_VOICE_CALL 0x3 + +/* container capability ID Pre/Post Processing (PP) */ +#define APM_CONTAINER_CAP_ID_PP 0x1 +/* container capability ID Compression/Decompression (CD) */ +#define APM_CONTAINER_CAP_ID_CD 0x2 +/* container capability ID End Point(EP) */ +#define APM_CONTAINER_CAP_ID_EP 0x3 +/* container capability ID Offload (OLC) */ +#define APM_CONTAINER_CAP_ID_OLC 0x4 + +/* container graph position Stream */ +#define APM_CONT_GRAPH_POS_STREAM 0x1 +/* container graph position Per Stream Per Device*/ +#define APM_CONT_GRAPH_POS_PER_STR_PER_DEV 0x2 +/* container graph position Stream-Device */ +#define APM_CONT_GRAPH_POS_STR_DEV 0x3 +/* container graph position Global Device */ +#define APM_CONT_GRAPH_POS_GLOBAL_DEV 0x4 + +#define APM_PROC_DOMAIN_ID_MDSP 0x1 +#define APM_PROC_DOMAIN_ID_ADSP 0x2 +#define APM_PROC_DOMAIN_ID_SDSP 0x4 +#define APM_PROC_DOMAIN_ID_CDSP 0x5 + +#define PCM_INTERLEAVED 1 +#define PCM_DEINTERLEAVED_PACKED 2 +#define PCM_DEINTERLEAVED_UNPACKED 3 +#define AR_I2S_WS_SRC_EXTERNAL 0 +#define AR_I2S_WS_SRC_INTERNAL 1 + +enum ar_event_types { + AR_EVENT_NONE = 0, + AR_PGA_DAPM_EVENT +}; + +/* + * Kcontrol IDs + */ +#define SND_SOC_AR_TPLG_FE_BE_GRAPH_CTL_MIX 256 +#define SND_SOC_AR_TPLG_VOL_CTL 257 + +/** + * %AR_TKN_U32_SUB_GRAPH_INSTANCE_ID: Sub Graph Instance Id + * + * %AR_TKN_U32_SUB_GRAPH_PERF_MODE: Performance mode of subgraph + * APM_SUB_GRAPH_PERF_MODE_LOW_POWER = 1, + * APM_SUB_GRAPH_PERF_MODE_LOW_LATENCY = 2 + * + * %AR_TKN_U32_SUB_GRAPH_DIRECTION: Direction of subgraph + * APM_SUB_GRAPH_DIRECTION_TX = 1, + * APM_SUB_GRAPH_DIRECTION_RX = 2 + * + * %AR_TKN_U32_SUB_GRAPH_SCENARIO_ID: Scenario ID for subgraph + * APM_SUB_GRAPH_SID_AUDIO_PLAYBACK = 1, + * APM_SUB_GRAPH_SID_AUDIO_RECORD = 2, + * APM_SUB_GRAPH_SID_VOICE_CALL = 3 + * + * %AR_TKN_U32_CONTAINER_INSTANCE_ID: Container Instance ID + * + * %AR_TKN_U32_CONTAINER_CAPABILITY_ID: Container capability ID + * APM_CONTAINER_CAP_ID_PP = 1, + * APM_CONTAINER_CAP_ID_CD = 2, + * APM_CONTAINER_CAP_ID_EP = 3, + * APM_CONTAINER_CAP_ID_OLC = 4 + * + * %AR_TKN_U32_CONTAINER_STACK_SIZE: Stack size in the container. + * + * %AR_TKN_U32_CONTAINER_GRAPH_POS: Graph Position + * APM_CONT_GRAPH_POS_STREAM = 1, + * APM_CONT_GRAPH_POS_PER_STR_PER_DEV = 2, + * APM_CONT_GRAPH_POS_STR_DEV = 3, + * APM_CONT_GRAPH_POS_GLOBAL_DEV = 4 + * + * %AR_TKN_U32_CONTAINER_PROC_DOMAIN: Processor domain of container + * APM_PROC_DOMAIN_ID_MDSP = 1, + * APM_PROC_DOMAIN_ID_ADSP = 2, + * APM_PROC_DOMAIN_ID_SDSP = 4, + * APM_PROC_DOMAIN_ID_CDSP = 5 + * + * %AR_TKN_U32_MODULE_ID: Module ID + * + * %AR_TKN_U32_MODULE_INSTANCE_ID: Module Instance ID. + * + * %AR_TKN_U32_MODULE_MAX_IP_PORTS: Module maximum input ports + * + * %AR_TKN_U32_MODULE_MAX_OP_PORTS: Module maximum output ports. + * + * %AR_TKN_U32_MODULE_IN_PORTS: Number of in ports + * + * %AR_TKN_U32_MODULE_OUT_PORTS: Number of out ports. + * + * %AR_TKN_U32_MODULE_SRC_OP_PORT_ID: Source module output port ID + * + * %AR_TKN_U32_MODULE_DST_IN_PORT_ID: Destination module input port ID + * + * %AR_TKN_U32_MODULE_HW_IF_IDX: Interface index types for I2S/LPAIF + * + * %AR_TKN_U32_MODULE_HW_IF_TYPE: Interface type + * LPAIF = 0, + * LPAIF_RXTX = 1, + * LPAIF_WSA = 2, + * LPAIF_VA = 3, + * LPAIF_AXI = 4 + * + * %AR_TKN_U32_MODULE_FMT_INTERLEAVE: PCM Interleaving + * PCM_INTERLEAVED = 1, + * PCM_DEINTERLEAVED_PACKED = 2, + * PCM_DEINTERLEAVED_UNPACKED = 3 + * + * %AR_TKN_U32_MODULE_FMT_DATA: data format + * FIXED POINT = 1, + * IEC60958 PACKETIZED = 3, + * IEC60958 PACKETIZED NON LINEAR = 8, + * COMPR OVER PCM PACKETIZED = 7, + * IEC61937 PACKETIZED = 2, + * GENERIC COMPRESSED = 5 + * + * %AR_TKN_U32_MODULE_FMT_SAMPLE_RATE: sample rate + * + * %AR_TKN_U32_MODULE_FMT_BIT_DEPTH: bit depth + * + * %AR_TKN_U32_MODULE_SD_LINE_IDX: I2S serial data line idx + * I2S_SD0 = 1, + * I2S_SD1 = 2, + * I2S_SD2 = 3, + * I2S_SD3 = 4, + * I2S_QUAD01 = 5, + * I2S_QUAD23 = 6, + * I2S_6CHS = 7, + * I2S_8CHS = 8 + * + * %AR_TKN_U32_MODULE_WS_SRC: Word Select Source + * AR_I2S_WS_SRC_EXTERNAL = 0, + * AR_I2S_WS_SRC_INTERNAL = 1, + * + * %AR_TKN_U32_MODULE_FRAME_SZ_FACTOR: Frame size factor + * + * %AR_TKN_U32_MODULE_LOG_CODE: Log Module Code + * + * %AR_TKN_U32_MODULE_LOG_TAP_POINT_ID: logging tap point of this module + * + * %AR_TKN_U32_MODULE_LOG_MODE: logging mode + * LOG_WAIT = 0, + * LOG_IMMEDIATELY = 1 + * + * %AR_TKN_DAI_INDEX: dai index + * + */ + +/* DAI Tokens */ +#define AR_TKN_DAI_INDEX 1 +/* SUB GRAPH Tokens */ +#define AR_TKN_U32_SUB_GRAPH_INSTANCE_ID 2 +#define AR_TKN_U32_SUB_GRAPH_PERF_MODE 3 +#define AR_TKN_U32_SUB_GRAPH_DIRECTION 4 +#define AR_TKN_U32_SUB_GRAPH_SCENARIO_ID 5 + +/* Container Tokens */ +#define AR_TKN_U32_CONTAINER_INSTANCE_ID 100 +#define AR_TKN_U32_CONTAINER_CAPABILITY_ID 101 +#define AR_TKN_U32_CONTAINER_STACK_SIZE 102 +#define AR_TKN_U32_CONTAINER_GRAPH_POS 103 +#define AR_TKN_U32_CONTAINER_PROC_DOMAIN 104 + +/* Module Tokens */ +#define AR_TKN_U32_MODULE_ID 200 +#define AR_TKN_U32_MODULE_INSTANCE_ID 201 +#define AR_TKN_U32_MODULE_MAX_IP_PORTS 202 +#define AR_TKN_U32_MODULE_MAX_OP_PORTS 203 +#define AR_TKN_U32_MODULE_IN_PORTS 204 +#define AR_TKN_U32_MODULE_OUT_PORTS 205 +#define AR_TKN_U32_MODULE_SRC_OP_PORT_ID 206 +#define AR_TKN_U32_MODULE_DST_IN_PORT_ID 207 +#define AR_TKN_U32_MODULE_SRC_INSTANCE_ID 208 +#define AR_TKN_U32_MODULE_DST_INSTANCE_ID 209 + +#define AR_TKN_U32_MODULE_SRC_OP_PORT_ID1 210 +#define AR_TKN_U32_MODULE_DST_IN_PORT_ID1 211 +#define AR_TKN_U32_MODULE_DST_INSTANCE_ID1 212 + +#define AR_TKN_U32_MODULE_SRC_OP_PORT_ID2 213 +#define AR_TKN_U32_MODULE_DST_IN_PORT_ID2 214 +#define AR_TKN_U32_MODULE_DST_INSTANCE_ID2 215 + +#define AR_TKN_U32_MODULE_SRC_OP_PORT_ID3 216 +#define AR_TKN_U32_MODULE_DST_IN_PORT_ID3 217 +#define AR_TKN_U32_MODULE_DST_INSTANCE_ID3 218 + +#define AR_TKN_U32_MODULE_SRC_OP_PORT_ID4 219 +#define AR_TKN_U32_MODULE_DST_IN_PORT_ID4 220 +#define AR_TKN_U32_MODULE_DST_INSTANCE_ID4 221 + +#define AR_TKN_U32_MODULE_SRC_OP_PORT_ID5 222 +#define AR_TKN_U32_MODULE_DST_IN_PORT_ID5 223 +#define AR_TKN_U32_MODULE_DST_INSTANCE_ID5 224 + +#define AR_TKN_U32_MODULE_SRC_OP_PORT_ID6 225 +#define AR_TKN_U32_MODULE_DST_IN_PORT_ID6 226 +#define AR_TKN_U32_MODULE_DST_INSTANCE_ID6 227 + +#define AR_TKN_U32_MODULE_SRC_OP_PORT_ID7 228 +#define AR_TKN_U32_MODULE_DST_IN_PORT_ID7 229 +#define AR_TKN_U32_MODULE_DST_INSTANCE_ID7 230 + +#define AR_TKN_U32_MODULE_HW_IF_IDX 250 +#define AR_TKN_U32_MODULE_HW_IF_TYPE 251 +#define AR_TKN_U32_MODULE_FMT_INTERLEAVE 252 +#define AR_TKN_U32_MODULE_FMT_DATA 253 +#define AR_TKN_U32_MODULE_FMT_SAMPLE_RATE 254 +#define AR_TKN_U32_MODULE_FMT_BIT_DEPTH 255 +#define AR_TKN_U32_MODULE_SD_LINE_IDX 256 +#define AR_TKN_U32_MODULE_WS_SRC 257 +#define AR_TKN_U32_MODULE_FRAME_SZ_FACTOR 258 +#define AR_TKN_U32_MODULE_LOG_CODE 259 +#define AR_TKN_U32_MODULE_LOG_TAP_POINT_ID 260 +#define AR_TKN_U32_MODULE_LOG_MODE 261 + +#endif /* __SND_AR_TOKENS_H__ */ diff --git a/linux-headers/include/sound/snd_sst_tokens.h b/linux-headers/include/sound/snd_sst_tokens.h index 8ba0112e533..defeb0c6ed2 100644 --- a/linux-headers/include/sound/snd_sst_tokens.h +++ b/linux-headers/include/sound/snd_sst_tokens.h @@ -4,16 +4,6 @@ * * Copyright (C) 2016 Intel Corp * Author: Shreyas NC - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. */ #ifndef __SND_SST_TOKENS_H__ #define __SND_SST_TOKENS_H__ @@ -233,6 +223,8 @@ * * %SKL_TKN_U32_ASTATE_CLK_SRC: Clock source for A-State entry * + * %SKL_TKN_U32_FMT_CFG_IDX: Format config index + * * module_id and loadable flags dont have tokens as these values will be * read from the DSP FW manifest * @@ -324,7 +316,9 @@ enum SKL_TKNS { SKL_TKN_U32_ASTATE_COUNT, SKL_TKN_U32_ASTATE_KCPS, SKL_TKN_U32_ASTATE_CLK_SRC, - SKL_TKN_MAX = SKL_TKN_U32_ASTATE_CLK_SRC, + + SKL_TKN_U32_FMT_CFG_IDX = 96, + SKL_TKN_MAX = SKL_TKN_U32_FMT_CFG_IDX, }; #endif diff --git a/linux-headers/include/sound/sof/abi.h b/linux-headers/include/sound/sof/abi.h index 6af32f82fb9..45c657c3919 100644 --- a/linux-headers/include/sound/sof/abi.h +++ b/linux-headers/include/sound/sof/abi.h @@ -24,9 +24,11 @@ #ifndef __INCLUDE_UAPI_SOUND_SOF_ABI_H__ #define __INCLUDE_UAPI_SOUND_SOF_ABI_H__ +#include + /* SOF ABI version major, minor and patch numbers */ #define SOF_ABI_MAJOR 3 -#define SOF_ABI_MINOR 17 +#define SOF_ABI_MINOR 23 #define SOF_ABI_PATCH 0 /* SOF ABI version number. Format within 32bit word is MMmmmppp */ @@ -58,5 +60,7 @@ /* SOF ABI magic number "SOF\0". */ #define SOF_ABI_MAGIC 0x00464F53 +/* SOF IPC4 ABI magic number "SOF4". */ +#define SOF_IPC4_ABI_MAGIC 0x34464F53 #endif diff --git a/linux-headers/include/sound/sof/header.h b/linux-headers/include/sound/sof/header.h index d623ee27f09..a77dc2eebb3 100644 --- a/linux-headers/include/sound/sof/header.h +++ b/linux-headers/include/sound/sof/header.h @@ -11,19 +11,60 @@ #include -/* - * Header for all non IPC ABI data. +/** + * struct sof_abi_hdr - Header for all non IPC ABI data. + * @magic: Magic number for validation + * for IPC3 data: 0x00464F53 ('S', 'O', 'F', '\0') + * for IPC4 data: 0x34464F53 ('S', 'O', 'F', '4') + * @type: module specific parameter + * for IPC3: Component specific type + * for IPC4: parameter ID (param_id) of the data + * @size: The size in bytes of the data, excluding this struct + * @abi: SOF ABI version. The version is valid in scope of the 'magic', IPC3 and + * IPC4 ABI version numbers have no relationship. + * @reserved: Reserved for future use + * @data: Component data - opaque to core * * Identifies data type, size and ABI. * Used by any bespoke component data structures or binary blobs. */ struct sof_abi_hdr { - __u32 magic; /**< 'S', 'O', 'F', '\0' */ - __u32 type; /**< component specific type */ - __u32 size; /**< size in bytes of data excl. this struct */ - __u32 abi; /**< SOF ABI version */ - __u32 reserved[4]; /**< reserved for future use */ - __u32 data[0]; /**< Component data - opaque to core */ + __u32 magic; + __u32 type; + __u32 size; + __u32 abi; + __u32 reserved[4]; + __u32 data[]; } __attribute__((packed)); +#define SOF_MANIFEST_DATA_TYPE_NHLT 1 + +/** + * struct sof_manifest_tlv - SOF manifest TLV data + * @type: type of data + * @size: data size (not including the size of this struct) + * @data: payload data + */ +struct sof_manifest_tlv { + __le32 type; + __le32 size; + __u8 data[]; +}; + +/** + * struct sof_manifest - SOF topology manifest + * @abi_major: Major ABI version + * @abi_minor: Minor ABI version + * @abi_patch: ABI patch + * @count: count of tlv items + * @items: consecutive variable size tlv items + */ +struct sof_manifest { + __le16 abi_major; + __le16 abi_minor; + __le16 abi_patch; + __le16 count; + struct sof_manifest_tlv items[]; +}; + #endif diff --git a/linux-headers/include/sound/sof/tokens.h b/linux-headers/include/sound/sof/tokens.h index a642bf30c02..453cab2a120 100644 --- a/linux-headers/include/sound/sof/tokens.h +++ b/linux-headers/include/sound/sof/tokens.h @@ -51,11 +51,19 @@ #define SOF_TKN_SCHED_CORE 203 #define SOF_TKN_SCHED_FRAMES 204 #define SOF_TKN_SCHED_TIME_DOMAIN 205 +#define SOF_TKN_SCHED_DYNAMIC_PIPELINE 206 +#define SOF_TKN_SCHED_LP_MODE 207 +#define SOF_TKN_SCHED_MEM_USAGE 208 +#define SOF_TKN_SCHED_USE_CHAIN_DMA 209 /* volume */ #define SOF_TKN_VOLUME_RAMP_STEP_TYPE 250 #define SOF_TKN_VOLUME_RAMP_STEP_MS 251 +#define SOF_TKN_GAIN_RAMP_TYPE 260 +#define SOF_TKN_GAIN_RAMP_DURATION 261 +#define SOF_TKN_GAIN_VAL 262 + /* SRC */ #define SOF_TKN_SRC_RATE_IN 300 #define SOF_TKN_SRC_RATE_OUT 301 @@ -78,6 +86,24 @@ */ #define SOF_TKN_COMP_CORE_ID 404 #define SOF_TKN_COMP_UUID 405 +#define SOF_TKN_COMP_CPC 406 +#define SOF_TKN_COMP_IS_PAGES 409 +#define SOF_TKN_COMP_NUM_AUDIO_FORMATS 410 +#define SOF_TKN_COMP_NUM_INPUT_PINS 411 +#define SOF_TKN_COMP_NUM_OUTPUT_PINS 412 +/* + * The token for input/output pin binding, it specifies the widget + * name that the input/output pin is connected from/to. + */ +#define SOF_TKN_COMP_INPUT_PIN_BINDING_WNAME 413 +#define SOF_TKN_COMP_OUTPUT_PIN_BINDING_WNAME 414 +#define SOF_TKN_COMP_NUM_INPUT_AUDIO_FORMATS 415 +#define SOF_TKN_COMP_NUM_OUTPUT_AUDIO_FORMATS 416 +/* + * The token value is copied to the dapm_widget's + * no_wname_in_kcontrol_name. + */ +#define SOF_TKN_COMP_NO_WNAME_IN_KCONTROL_NAME 417 /* SSP */ #define SOF_TKN_INTEL_SSP_CLKS_CONTROL 500 @@ -139,4 +165,52 @@ #define SOF_TKN_INTEL_HDA_RATE 1500 #define SOF_TKN_INTEL_HDA_CH 1501 +/* AFE */ +#define SOF_TKN_MEDIATEK_AFE_RATE 1600 +#define SOF_TKN_MEDIATEK_AFE_CH 1601 +#define SOF_TKN_MEDIATEK_AFE_FORMAT 1602 + +/* MIXER */ +#define SOF_TKN_MIXER_TYPE 1700 + +/* ACPDMIC */ +#define SOF_TKN_AMD_ACPDMIC_RATE 1800 +#define SOF_TKN_AMD_ACPDMIC_CH 1801 + +/* CAVS AUDIO FORMAT */ +#define SOF_TKN_CAVS_AUDIO_FORMAT_IN_RATE 1900 +#define SOF_TKN_CAVS_AUDIO_FORMAT_IN_BIT_DEPTH 1901 +#define SOF_TKN_CAVS_AUDIO_FORMAT_IN_VALID_BIT_DEPTH 1902 +#define SOF_TKN_CAVS_AUDIO_FORMAT_IN_CHANNELS 1903 +#define SOF_TKN_CAVS_AUDIO_FORMAT_IN_CH_MAP 1904 +#define SOF_TKN_CAVS_AUDIO_FORMAT_IN_CH_CFG 1905 +#define SOF_TKN_CAVS_AUDIO_FORMAT_IN_INTERLEAVING_STYLE 1906 +#define SOF_TKN_CAVS_AUDIO_FORMAT_IN_FMT_CFG 1907 +#define SOF_TKN_CAVS_AUDIO_FORMAT_IN_SAMPLE_TYPE 1908 +#define SOF_TKN_CAVS_AUDIO_FORMAT_INPUT_PIN_INDEX 1909 +/* intentional token numbering discontinuity, reserved for future use */ +#define SOF_TKN_CAVS_AUDIO_FORMAT_OUT_RATE 1930 +#define SOF_TKN_CAVS_AUDIO_FORMAT_OUT_BIT_DEPTH 1931 +#define SOF_TKN_CAVS_AUDIO_FORMAT_OUT_VALID_BIT_DEPTH 1932 +#define SOF_TKN_CAVS_AUDIO_FORMAT_OUT_CHANNELS 1933 +#define SOF_TKN_CAVS_AUDIO_FORMAT_OUT_CH_MAP 1934 +#define SOF_TKN_CAVS_AUDIO_FORMAT_OUT_CH_CFG 1935 +#define SOF_TKN_CAVS_AUDIO_FORMAT_OUT_INTERLEAVING_STYLE 1936 +#define SOF_TKN_CAVS_AUDIO_FORMAT_OUT_FMT_CFG 1937 +#define SOF_TKN_CAVS_AUDIO_FORMAT_OUT_SAMPLE_TYPE 1938 +#define SOF_TKN_CAVS_AUDIO_FORMAT_OUTPUT_PIN_INDEX 1939 +/* intentional token numbering discontinuity, reserved for future use */ +#define SOF_TKN_CAVS_AUDIO_FORMAT_IBS 1970 +#define SOF_TKN_CAVS_AUDIO_FORMAT_OBS 1971 +#define SOF_TKN_CAVS_AUDIO_FORMAT_DMA_BUFFER_SIZE 1972 + +/* COPIER */ +#define SOF_TKN_INTEL_COPIER_NODE_TYPE 1980 +#define SOF_TKN_INTEL_COPIER_DEEP_BUFFER_DMA_MS 1981 + +/* ACP I2S */ +#define SOF_TKN_AMD_ACPI2S_RATE 1700 +#define SOF_TKN_AMD_ACPI2S_CH 1701 +#define SOF_TKN_AMD_ACPI2S_TDM_MODE 1702 + #endif diff --git a/linux-headers/include/sound/tlv.h b/linux-headers/include/sound/tlv.h index 7d6d65f60a4..b99a2414b53 100644 --- a/linux-headers/include/sound/tlv.h +++ b/linux-headers/include/sound/tlv.h @@ -1,15 +1,4 @@ /* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ #ifndef __UAPI_SOUND_TLV_H #define __UAPI_SOUND_TLV_H diff --git a/linux-headers/include/sound/usb_stream.h b/linux-headers/include/sound/usb_stream.h index 31635f32b8b..31f4c2e3735 100644 --- a/linux-headers/include/sound/usb_stream.h +++ b/linux-headers/include/sound/usb_stream.h @@ -1,20 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ /* * Copyright (C) 2007, 2008 Karsten Wiese - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY - * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software Foundation, - * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef __SOUND_USB_STREAM_H @@ -61,7 +47,7 @@ struct usb_stream { unsigned inpacket_split_at; unsigned next_inpacket_split; unsigned next_inpacket_split_at; - struct usb_stream_packet inpacket[0]; + struct usb_stream_packet inpacket[]; }; enum usb_stream_state { diff --git a/linux-headers/include/xen/evtchn.h b/linux-headers/include/xen/evtchn.h index 7fbf732f168..aef2b75f341 100644 --- a/linux-headers/include/xen/evtchn.h +++ b/linux-headers/include/xen/evtchn.h @@ -101,4 +101,13 @@ struct ioctl_evtchn_restrict_domid { domid_t domid; }; +/* + * Bind statically allocated @port. + */ +#define IOCTL_EVTCHN_BIND_STATIC \ + _IOC(_IOC_NONE, 'E', 7, sizeof(struct ioctl_evtchn_bind)) +struct ioctl_evtchn_bind { + unsigned int port; +}; + #endif /* __LINUX_PUBLIC_EVTCHN_H__ */ diff --git a/linux-headers/include/xen/gntdev.h b/linux-headers/include/xen/gntdev.h index 5fa3238f933..7210dc9775b 100644 --- a/linux-headers/include/xen/gntdev.h +++ b/linux-headers/include/xen/gntdev.h @@ -47,7 +47,13 @@ struct ioctl_gntdev_grant_ref { /* * Inserts the grant references into the mapping table of an instance * of gntdev. N.B. This does not perform the mapping, which is deferred - * until mmap() is called with @index as the offset. + * until mmap() is called with @index as the offset. @index should be + * considered opaque to userspace, with one exception: if no grant + * references have ever been inserted into the mapping table of this + * instance, @index will be set to 0. This is necessary to use gntdev + * with userspace APIs that expect a file descriptor that can be + * mmap()'d at offset 0, such as Wayland. If @count is set to 0, this + * ioctl will fail. */ #define IOCTL_GNTDEV_MAP_GRANT_REF \ _IOC(_IOC_NONE, 'G', 0, sizeof(struct ioctl_gntdev_map_grant_ref)) diff --git a/linux-headers/include/xen/privcmd.h b/linux-headers/include/xen/privcmd.h index b1024f1d565..39808c57ed2 100644 --- a/linux-headers/include/xen/privcmd.h +++ b/linux-headers/include/xen/privcmd.h @@ -98,6 +98,18 @@ struct privcmd_mmap_resource { __u64 addr; }; +/* For privcmd_irqfd::flags */ +#define PRIVCMD_IRQFD_FLAG_DEASSIGN (1 << 0) + +struct privcmd_irqfd { + void *dm_op; + __u32 size; /* Size of structure pointed by dm_op */ + __u32 fd; + __u32 flags; + domid_t dom; + __u8 pad[2]; +}; + /* * @cmd: IOCTL_PRIVCMD_HYPERCALL * @arg: &privcmd_hypercall_t @@ -125,5 +137,7 @@ struct privcmd_mmap_resource { _IOC(_IOC_NONE, 'P', 6, sizeof(domid_t)) #define IOCTL_PRIVCMD_MMAP_RESOURCE \ _IOC(_IOC_NONE, 'P', 7, sizeof(struct privcmd_mmap_resource)) +#define IOCTL_PRIVCMD_IRQFD \ + _IOC(_IOC_NONE, 'P', 8, sizeof(struct privcmd_irqfd)) #endif /* __LINUX_PUBLIC_PRIVCMD_H__ */ diff --git a/llvm b/llvm index 185b81e034b..b2417f51dbb 160000 --- a/llvm +++ b/llvm @@ -1 +1 @@ -Subproject commit 185b81e034ba60081023b6e59504dfffb560f3e3 +Subproject commit b2417f51dbbd7435eb3aaf203de24de6754da50e diff --git a/scripts/generate_target_board b/scripts/generate_target_board new file mode 100755 index 00000000000..c4d91eebc9f --- /dev/null +++ b/scripts/generate_target_board @@ -0,0 +1,77 @@ +#!/usr/bin/env python3 + +import argparse +import sys + +def parse_options(argv): + parser = argparse.ArgumentParser() + + parser.add_argument('--sim-name', type = str, required = True, + help = 'The sim name of target board, like riscv-sim.') + parser.add_argument('--build-arch-abi', type = str, required = True, + help = 'The arch and abi when build, like ' + + '--with-arch=rv64gcv --with-abi=lp64d' + + 'in riscv-gnu-toolchain configure, ' + + 'within format rv64gcv-lp64d.') + parser.add_argument('--extra-test-arch-abi-flags-list', type=str, + help = 'The arch, abi and flags list for extra test,' + + 'like =rv64gcv_zvl256b-lp64d:' + + '--param=riscv-autovec-lmul=dynamic:' + + '--param=riscv-autovec-preference=fixed-vlmax.', + default = '') + parser.add_argument('--cmodel', type = str, default = 'medlow', + help = 'The name of the cmodel, like medlow.') + + options = parser.parse_args() + return options + +# Generate only one target board like below: +# riscv-sim/-march=rv64gcv_zvl256b/-mabi=lp64d/-mcmodel=medlow +# From the config_string like below, --param is optional +# rv64gcv_zvl128b-lp64d:--param=riscv-autovec-lmul=m1 +def generate_one_target_board(arch_abi, flags, options): + arch_and_abi = arch_abi.split("-") + arch = arch_and_abi[0] + abi = arch_and_abi[1] + + if len(flags) == 0: + return "{0}/-march={1}/-mabi={2}/-mcmodel={3}".format( + options.sim_name, arch, abi, options.cmodel) + + flags = flags.replace(":", "/") + + return "{0}/-march={1}/-mabi={2}/-mcmodel={3}/{4}".format( + options.sim_name, arch, abi, options.cmodel, flags) + +def main(argv): + options = parse_options(argv) + + if not options.sim_name or not options.build_arch_abi: + print ("The --sim-name and/or --build-arch-abi cannot be empty or null.") + return + + target_board_list = [ + generate_one_target_board(options.build_arch_abi, "", options) + ] + + if options.extra_test_arch_abi_flags_list: + extra_test_list = options.extra_test_arch_abi_flags_list.split (";") + + for extra_test in extra_test_list: + idx = extra_test.find(":") + + if idx == -1: + one_target_board = generate_one_target_board(extra_test, "", options) + target_board_list.append(one_target_board) + else: + arch_abi = extra_test[:idx] + flags = extra_test[idx + 1:] + + for flag in flags.split(","): + one_target_board = generate_one_target_board(arch_abi, flag, options) + target_board_list.append(one_target_board) + + print(' '.join(target_board_list)) + +if __name__ == '__main__': + sys.exit(main(sys.argv)) diff --git a/scripts/march-to-cpu-opt b/scripts/march-to-cpu-opt index 493ab1399f6..f6777f4b79d 100755 --- a/scripts/march-to-cpu-opt +++ b/scripts/march-to-cpu-opt @@ -7,7 +7,7 @@ import elftools.elf.elffile import elftools.elf.enums import elftools.elf.sections -EXT_OPTS = { +QEMU_EXT_OPTS = { "zba": "zba=true", "zbb": "zbb=true", "zbc": "zbc=true", @@ -16,12 +16,34 @@ EXT_OPTS = { "zve32f": "Zve32f=true", "zve64f": "Zve64f=true", "zfh": "Zfh=true", - "zfhmin": "Zfhmin=true", + "zfhmin": "Zfhmin=true", "zhinx": "zhinx=true", "zfinx": "zfinx=true", "zdinx": "zdinx=true", } +SPIKE_EXT_NOT_ALLOWED = [ + "zve32x", + "zve32f", + "zve64x", + "zve64f", + "zve64d", + "zvl32b", + "zvl64b", + "zvl128b", + "zvl256b", + "zvl512b", + "zvl1024b", + "zvl2048b", + "zvl4096b", +] + +CPU_OPTIONS = { + "xlen": "", + "vlen": "", + "extensions": [], +} + SUPPORTTED_EXTS = "iemafdcbvph" MC_EXT_PREFIX = "zsx" @@ -29,8 +51,13 @@ def parse_opt(argv): parser = argparse.ArgumentParser() parser.add_argument('-march', '--with-arch', type=str, dest='march') parser.add_argument('-selftest', action='store_true') - parser.add_argument('--get-riscv-tag', type=str) - parser.add_argument('--get-elf-class', type=str) + parser.add_argument('--elf-file-path', type=str) + parser.add_argument('--print-xlen', action='store_true', default=False) + parser.add_argument('--print-vlen', action='store_true', default=False) + parser.add_argument('--print-qemu-cpu', action='store_true', default=False) + parser.add_argument('--print-spike-isa', action='store_true', default=False) + parser.add_argument('--print-spike-varch', action='store_true', + default=False) opt = parser.parse_args() return opt @@ -119,31 +146,47 @@ def get_vlen(ext_dict): vlen = max(vlen, zvelen) return vlen -def conver_arch_to_qemu_cpu_opt(march): - if len(march) < 5: - return None - - ext_dict = parse_march(march) - - cpu_opt = [] - cpu_opt.append(march[0:4]) # rv32 or rv64 - - vlen = get_vlen(ext_dict) +def print_qemu_cpu(): + cpu_options = [] + cpu_options.append("rv{0}".format(CPU_OPTIONS['xlen'])) - if vlen != 0: - cpu_opt.append("vlen=%d" % vlen) + if CPU_OPTIONS['vlen']: + cpu_options.append("vlen={0}".format(CPU_OPTIONS['vlen'])) disable_all_fd = False - for ext in ext_dict.keys(): - if ext in EXT_OPTS: - cpu_opt.append(EXT_OPTS[ext]) + for ext in CPU_OPTIONS['extensions']: + if ext in QEMU_EXT_OPTS: + cpu_options.append(QEMU_EXT_OPTS[ext]) + if ext in ['zhinx', 'zfinx', 'zdinx']: disable_all_fd = True + if disable_all_fd: - cpu_opt.append("f=false") - cpu_opt.append("d=false") - return ",".join(cpu_opt) + cpu_options.append("f=false") + cpu_options.append("d=false") + + return ",".join(cpu_options) + +def print_spike_isa(): + cpu_options = [] + cpu_options.append("rv{0}".format(CPU_OPTIONS['xlen'])) + + for ext in CPU_OPTIONS['extensions']: + if ext not in SPIKE_EXT_NOT_ALLOWED: + normalized_ext_name = ext + + if len(ext) > 1: + normalized_ext_name = "_{0}".format(normalized_ext_name) + cpu_options.append(normalized_ext_name) + + return "".join(cpu_options) + +def print_spike_varch(): + if not CPU_OPTIONS['vlen']: + return "" + + return "vlen:{0},elen:{1}".format(CPU_OPTIONS['vlen'], CPU_OPTIONS['xlen']) class TestArchStringParse(unittest.TestCase): def _test(self, arch, expected_arch_list, expected_vlen=0): @@ -168,7 +211,7 @@ def open_elf(path): raise Exception("%s is not ELF file!" % path) return elffile -def read_elf_class(path): +def get_xlen(path): elffile = open_elf(path) return elffile.elfclass @@ -204,21 +247,41 @@ def read_arch_attr (path): return val raise Exception("Not found ELF attribute in %s?" % path) +def parse_elf_file(elf_file_path): + extensions = [] + extension_dict = parse_march(read_arch_attr(elf_file_path)) + + for extension in extension_dict.keys(): + extensions.append(extension) + + CPU_OPTIONS["extensions"] = extensions + CPU_OPTIONS["vlen"] = get_vlen(extension_dict) + CPU_OPTIONS["xlen"] = get_xlen(elf_file_path) + def main(argv): opt = parse_opt(argv) if opt.selftest: selftest() return 0 - if (opt.get_elf_class): - elf_class = read_elf_class (opt.get_elf_class) - print (elf_class) + + parse_elf_file(opt.elf_file_path) + + if opt.print_xlen: + print(CPU_OPTIONS['xlen']) return - if (opt.get_riscv_tag): - march = read_arch_attr (opt.get_riscv_tag) - else: - march = opt.march - cpu_opt = conver_arch_to_qemu_cpu_opt(march) - print (cpu_opt) + + if opt.print_vlen: + print(CPU_OPTIONS['vlen']) + return + + if opt.print_qemu_cpu: + print(print_qemu_cpu()) + + if opt.print_spike_isa: + print(print_spike_isa()) + + if opt.print_spike_varch: + print(print_spike_varch()) if __name__ == '__main__': sys.exit(main(sys.argv)) diff --git a/scripts/testsuite-filter b/scripts/testsuite-filter index 3d9fb272b47..df5004e0d92 100755 --- a/scripts/testsuite-filter +++ b/scripts/testsuite-filter @@ -187,6 +187,7 @@ def filter_result(tool, libc, white_list_base_dir, unexpected_results): arch = "" abi = "" cmodel = "" + other_args = [] for info in variation.split('/'): if info.startswith('-march'): arch = info[7:] @@ -194,13 +195,15 @@ def filter_result(tool, libc, white_list_base_dir, unexpected_results): abi = info[6:] elif info.startswith('-mcmodel'): cmodel = info[9:] + elif info != 'riscv-sim': + other_args.append(info) white_list = \ get_white_list(arch, abi, libc, os.path.join(white_list_base_dir, tool), is_gcc) # filter! - config = (arch, abi, cmodel) + config = (arch, abi, cmodel, ":".join(other_args)) fail_count = 0 unexpected_result_list = [] if is_gcc: @@ -234,8 +237,8 @@ def filter_result(tool, libc, white_list_base_dir, unexpected_results): if len(unexpected_result_list) != 0: - print ("\t\t=== %s: Unexpected fails for %s %s %s ===" \ - % (testtool, arch, abi, cmodel)) + print ("\t\t=== %s: Unexpected fails for %s %s %s %s ===" \ + % (testtool, arch, abi, cmodel, " ".join(other_args))) for ur in unexpected_result_list: print (ur) @@ -257,7 +260,7 @@ def filter_result(tool, libc, white_list_base_dir, unexpected_results): print (" | # of unexpected case") print (" |%s |" % bar) for config, result in summary.items(): - arch, abi, cmodel = config + arch, abi, cmodel, other_args = config print (" %10s/ %6s/ %6s |" % (arch, abi, cmodel), end='') for tool in toollist: if tool not in summary[config]: @@ -271,6 +274,8 @@ def filter_result(tool, libc, white_list_base_dir, unexpected_results): fail_count = summary[config][tool] print ("%13d |" % fail_count, end='') print ("") + if (len(other_args)): + print (" " + other_args.replace(":", " ")) if any_fail or len(summary.items()) == 0: return 1 else: diff --git a/scripts/wrapper/qemu/riscv64-unknown-linux-gnu-run b/scripts/wrapper/qemu/riscv64-unknown-linux-gnu-run index 93dfccf7013..fe5b1dc38e6 100755 --- a/scripts/wrapper/qemu/riscv64-unknown-linux-gnu-run +++ b/scripts/wrapper/qemu/riscv64-unknown-linux-gnu-run @@ -10,6 +10,8 @@ do shift done -xlen="$(march-to-cpu-opt --get-elf-class $1)" +xlen="$(march-to-cpu-opt --elf-file-path $1 --print-xlen)" +qemu_cpu="$(march-to-cpu-opt --elf-file-path $1 --print-qemu-cpu)" -QEMU_CPU="$(march-to-cpu-opt --get-riscv-tag $1)" qemu-riscv$xlen -r 5.10 "${qemu_args[@]}" -L ${RISC_V_SYSROOT} "$@" +QEMU_CPU="${qemu_cpu}" qemu-riscv${xlen} -r 5.10 "${qemu_args[@]}" \ + -L ${RISC_V_SYSROOT} "$@" diff --git a/scripts/wrapper/spike/riscv64-unknown-linux-gnu-run b/scripts/wrapper/spike/riscv64-unknown-linux-gnu-run index 6f5ba837349..29f9bf3a738 100755 --- a/scripts/wrapper/spike/riscv64-unknown-linux-gnu-run +++ b/scripts/wrapper/spike/riscv64-unknown-linux-gnu-run @@ -1,7 +1,13 @@ -#!/bin/sh +#!/bin/bash -xlen="$(readelf -h $1 | grep 'Class' | cut -d: -f 2 | xargs echo | sed 's/^ELF//')" -arch="${ARCH_STR#*=}" -spike \ - --isa=${arch} \ - ${PK_PATH}/pk${xlen} "$@" +xlen="$(march-to-cpu-opt --elf-file-path $1 --print-xlen)" +isa="$(march-to-cpu-opt --elf-file-path $1 --print-spike-isa)" +varch="$(march-to-cpu-opt --elf-file-path $1 --print-spike-varch)" + +isa_option="--isa=${isa}" +varch_option="" +memory_option="--misaligned" + +[[ ! -z ${varch} ]] && varch_option="--varch=${varch}" + +spike ${memory_option} ${isa_option} ${varch_option} ${PK_PATH}/pk${xlen} "$@" diff --git a/test/allowlist/binutils/common.log b/test/allowlist/binutils/common.log index 4c4e56c98ac..792d6005489 100644 --- a/test/allowlist/binutils/common.log +++ b/test/allowlist/binutils/common.log @@ -1,12 +1 @@ # -# Failures look like: -# Error: rv64im_zba_zbb_zcb: unknown prefixed ISA extension `zcb' -# Error: rv32i_zcf: unknown prefixed ISA extension `zcf' -# -FAIL: gas/riscv/march-fail-rv64i_zcf -FAIL: gas/riscv/march-imply-zcd -FAIL: gas/riscv/march-imply-zcf -FAIL: gas/riscv/zca -FAIL: gas/riscv/zcb -FAIL: gas/riscv/zcd -FAIL: gas/riscv/zcf diff --git a/test/allowlist/gcc/glibc.log b/test/allowlist/gcc/glibc.log index 10303b9d40d..b057222b50c 100644 --- a/test/allowlist/gcc/glibc.log +++ b/test/allowlist/gcc/glibc.log @@ -17,3 +17,9 @@ FAIL: gfortran.dg/ieee/rounding_3.f90 # Synchronization problem. # FAIL: gcc.dg/tree-prof/time-profiler-2.c +# +# Fix upstream +# https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=c9a19621a07e246385ae075b61283140b23c3b5a +# +FAIL: gcc.dg/analyzer/data-model-4.c +FAIL: gcc.dg/analyzer/torture/conftest-1.c