README.md

KlipperMacroArgs

Cura post processing script for Klipper IDEX machines. (May work on single extruder as well but untested)

This replaces needing start gcode in slicer, you do everything in your Klipper start print macro.

Install:

For version 5.2 (latest at time of release) copy KlipperMacroArgs.py to %appdata%\Roaming\cura\5.2\scripts

To enable script:

Extensions -> Post Processesing -> Modify G-Code -> Add a script Choose KlipperMacroArgs then check enable for it.

Confirmed working on:

Cura 5.2

Example to get the passed args:

{% set BED_TEMP = params.BED_TEMP | default(0.0) | float %}
{% set T0_TEMP = params.T0_TEMP | default(0.0) | float  %}
{% set T1_TEMP = params.T1_TEMP | default(0.0) | float  %}
{% set layer_height = params.LAYER_HEIGHT | default(0.2) | float %}
{% set initial_extruder = params.INITIAL | default("T0") %}
{% set T0_material = params.T0_MATERIAL | default("?") %}
{% set T1_material = params.T1_MATERIAL | default("?") %}
{% set T0_nozzle = params.T0_NOZZLE | default(0.4) | float %}
{% set T1_nozzle = params.T1_NOZZLE | default(0.4) | float %}
{% set T0_standby_temp = params.T0_STANDBY_TEMP | default(0.0) | float %}
{% set T1_standby_temp = params.T1_STANDBY_TEMP | default(0.0) | float %}