WR Firmware 2.0.4 temporary limit not displaying constantly

[agger83]

After updating the firmware to 2.0.4, a temporary limit can still be set and used by the inverter. But the display in openDTU is showing the permanent limit after roughly 5 minutes.

Steps to reproduce:

• set a temporary limit with openDTU, e.g. 5%
• OpenDTU will display this current limit and the inverter will produce accordingly
• after roughly 5 minutes openDTU will display the permanent limit instead, eg 100%
• the inverter will still product according to the temporary limit until the next restart

So actually this is a display bug in openDTU but must be somehow related to the new firmware of the inverter.

Originally posted by @agger83 in #2153 (reply in thread)