NPP 51.2v 280AH (FLCD-30048 or NSFG280F10/DS from the sticker)

[ClarkAlmazan]

BMS is P16S200A-21452-2.02, using PACE_MODBUS protocol. The battery's touch interface also allows you to change the protocol w/o using pbmstools.

Every setting/value seems to be visible from the esp32 template, but I haven't tried to change any of the settings.

I used the following for setup:

• Wemos D1 Mini 32 (TX: GPIO17, RX: GPIO16, flow control pin: GPIO15)
• MAX485 w/ flow control module
• ESPHome 2023.11.06

[syssi]

I've added your battery bank to the list of supported devices at the README.