everything-presence-one-beta.yaml

substitutions:
  name: "everything-presence-beta"
  friendly_name: "Everything Presence One"
  project_name: "Everything Smart Technology.Everything Presence One"
  project_version: "1.2.3b"
  temperature_offset: "-3"
  humidity_offset: "5"
  temperature_update_interval: "60s"
  illuminance_update_interval: "30s"
  pir_delay_off: "10s"
  occupancy_delay_off: "15s"
  hidden_ssid: "false"
  factory_reset_disabled: "true"
  uart_target_output_disabled: "false"
  uart_presence_output_disabled: "true"

esphome:
  name: ${name}
  friendly_name: ${friendly_name}
  name_add_mac_suffix: true
  project:
    name: "${project_name}"
    version: "${project_version}"
  includes:
    - SEN0395_distance.h

esp32:
  board: esp32dev

logger:

api:

ota:

wifi:
  fast_connect: ${hidden_ssid}
  ap: {}

improv_serial:

dashboard_import:
  package_import_url: github://everythingsmarthome/everything-presence-one/everything-presence-one-beta.yaml@main
  import_full_config: false

light:
  - platform: status_led
    name: ESP32 status LED
    pin: GPIO32
    entity_category: config
    disabled_by_default: True
  - platform: binary
    name: mmWave LED
    restore_mode: RESTORE_DEFAULT_OFF
    output: mmwave_led_output
    entity_category: config
    disabled_by_default: True

output:
  - platform: template
    id: mmwave_led_output
    type: binary
    write_action:
      - switch.turn_off: mmwave_sensor
      - delay: 1s
      - if:
          condition:
            lambda: !lambda return state;
          then:
            - uart.write: "setLedMode 1 0"
          else:
            - uart.write: "setLedMode 1 1"
      - delay: 1s
      - uart.write: "saveConfig"
      - delay: 3s
      - switch.turn_on: mmwave_sensor

i2c:
  sda: 26
  scl: 25
  scan: true

sensor:
  - platform: shtcx
    id: "shtc3_sensor"
    temperature:
      name: Temperature
      id: temperature_sensor
      filters:
        - offset: ${temperature_offset}
        - lambda: "return x + id(temperature_offset_ui).state;"
    humidity:
      name: Humidity
      id: humidity_sensor
      filters:
        - offset: ${humidity_offset}
        - lambda: "return x + id(humidity_offset_ui).state;"
    address: 0x70
    update_interval: ${temperature_update_interval}
  - platform: bh1750
    name: Illuminance
    id: illuminance_sensor
    address: 0x23
    update_interval: ${illuminance_update_interval}
    filters:
      - lambda: "return x + id(illuminance_offset_ui).state;"
  - platform: template
    name: Target 1 Distance # Don't change
    id: target_distance_1_m
    accuracy_decimals: 2
    disabled_by_default: false
  - platform: template
    name: Target 2 Distance # Don't change
    id: target_distance_2_m
    accuracy_decimals: 2
    disabled_by_default: True
  - platform: template
    name: Target 3 Distance # Don't change
    id: target_distance_3_m
    accuracy_decimals: 2
    disabled_by_default: True
  - platform: template
    name: Target 4 Distance # Don't change
    id: target_distance_4_m
    accuracy_decimals: 2
    disabled_by_default: True
  - platform: template
    name: "Target 1 SNR" # Don't change
    disabled_by_default: True
  - platform: template
    name: "Target 2 SNR" # Don't change
    disabled_by_default: True
  - platform: template
    name: "Target 3 SNR" # Don't change
    disabled_by_default: True
  - platform: template
    name: "Target 4 SNR" # Don't change
    disabled_by_default: True

binary_sensor:
  - platform: gpio
    name: mmWave
    id: mmwave
    device_class: occupancy
    pin:
      number: GPIO15
      mode: INPUT_PULLDOWN
  - platform: gpio
    pin:
      number: 33
      mode: INPUT_PULLDOWN
    name: PIR
    id: pir_motion_sensor
    device_class: motion
    filters:
      - delayed_off: ${pir_delay_off}
  - platform: template
    name: Occupancy
    id: occupancy
    device_class: occupancy
    filters:
      - delayed_off: ${occupancy_delay_off}
    lambda: |-
      if ( id(mmwave).state or id(pir_motion_sensor).state) {
        return true;
      } 
      else if (id(mmwave).state == 0 and id(pir_motion_sensor).state == 0) {
        return false;
      } 
      else {
        return id(occupancy).state;
      }
  - platform: template
    name: "Target 1 Active" # Don't change
    disabled_by_default: False
  - platform: template
    name: "Target 2 Active" # Don't change
    disabled_by_default: True
  - platform: template
    name: "Target 3 Active" # Don't change
    disabled_by_default: True
  - platform: template
    name: "Target 4 Active" # Don't change
    disabled_by_default: True

uart:
  id: uart_bus
  tx_pin: GPIO13
  rx_pin: GPIO14
  baud_rate: 115200


switch:
  - platform: template
    name: mmWave sensor
    id: mmwave_sensor
    disabled_by_default: True
    entity_category: config
    optimistic: true
    restore_mode: RESTORE_DEFAULT_ON
    turn_on_action:
      - uart.write: "sensorStart"
      - delay: 1s
    turn_off_action:
      - uart.write: "sensorStop"
      - delay: 1s

  - platform: template
    name: UART presence output
    id: uart_presence_output
    entity_category: config
    internal: ${uart_presence_output_disabled}
    optimistic: true
    turn_on_action:
      - switch.turn_off: mmwave_sensor
      - delay: 1s
      - uart.write: "setUartOutput 1 1"
      - delay: 1s
      - uart.write: "saveConfig"
      - delay: 3s
      - switch.turn_on: mmwave_sensor
    turn_off_action:
      - switch.turn_off: mmwave_sensor
      - delay: 1s
      - uart.write: "setUartOutput 1 0"
      - delay: 1s
      - uart.write: "saveConfig"
      - delay: 3s
      - switch.turn_on: mmwave_sensor

  - platform: template
    name: UART target output
    id: uart_target_output
    entity_category: config
    internal: ${uart_target_output_disabled}
    optimistic: true
    assumed_state: false
    restore_mode: ALWAYS_ON
    turn_on_action:
      - switch.turn_off: mmwave_sensor
      - delay: 1s
      - uart.write: "setUartOutput 2 1 1 1"
      - delay: 1s
      - uart.write: "saveConfig"
      - delay: 3s
      - switch.turn_on: mmwave_sensor
    turn_off_action:
      - switch.turn_off: mmwave_sensor
      - delay: 1s
      - uart.write: "setUartOutput 2 0"
      - delay: 1s
      - uart.write: "saveConfig"
      - delay: 3s
      - switch.turn_on: mmwave_sensor

number:
  - platform: template
    id: mmwave_zone_1_start
    name: mmWave Zone 1 Start
    min_value: 0
    max_value: 800
    step: 15
    initial_value: 0
    mode: slider
    unit_of_measurement: cm
    optimistic: true
    entity_category: config
    disabled_by_default: False
    icon: "mdi:arrow-left-right"

  - platform: template
    id: mmwave_zone_1_end
    name: mmWave Zone 1 End
    min_value: 0
    max_value: 800
    step: 15
    initial_value: 315
    mode: slider
    unit_of_measurement: cm
    optimistic: true
    entity_category: config
    disabled_by_default: False
    icon: "mdi:arrow-left-right"

  - platform: template
    id: mmwave_zone_2_start
    name: mmWave Zone 2 Start
    min_value: 0
    max_value: 800
    step: 15
    initial_value: 0
    mode: slider
    unit_of_measurement: cm
    optimistic: true
    entity_category: config
    disabled_by_default: True
    icon: "mdi:arrow-left-right"
    
  - platform: template
    id: mmwave_zone_2_end
    name: mmWave Zone 2 End
    min_value: 0
    max_value: 800
    step: 15
    initial_value: 0
    mode: slider
    unit_of_measurement: cm
    optimistic: true
    entity_category: config
    disabled_by_default: True
    icon: "mdi:arrow-left-right"
    
  - platform: template
    id: mmwave_zone_3_start
    name: mmWave Zone 3 Start
    min_value: 0
    max_value: 800
    step: 15
    initial_value: 0
    mode: slider
    unit_of_measurement: cm
    optimistic: true
    entity_category: config
    disabled_by_default: True
    icon: "mdi:arrow-left-right"

  - platform: template
    id: mmwave_zone_3_end
    name: mmWave Zone 3 End
    min_value: 0
    max_value: 800
    step: 15
    initial_value: 0
    mode: slider
    unit_of_measurement: cm
    optimistic: true
    entity_category: config
    disabled_by_default: True
    icon: "mdi:arrow-left-right"

  - platform: template
    id: mmwave_zone_4_start
    name: mmWave Zone 4 Start
    min_value: 0
    max_value: 800
    step: 15
    initial_value: 0
    mode: slider
    unit_of_measurement: cm
    optimistic: true
    entity_category: config
    disabled_by_default: True
    icon: "mdi:arrow-left-right"

  - platform: template
    id: mmwave_zone_4_end
    name: mmWave Zone 4 End
    min_value: 0
    max_value: 800
    step: 15
    initial_value: 0
    mode: slider
    unit_of_measurement: cm
    optimistic: true
    entity_category: config
    disabled_by_default: True
    icon: "mdi:arrow-left-right"

  - platform: template
    name: mmWave off latency
    icon: mdi:clock-end
    entity_category: config
    id: mmwave_off_latency
    min_value: 1
    max_value: 60
    initial_value: 15
    optimistic: true
    step: 1
    restore_value: true
    unit_of_measurement: seconds
    mode: slider
    set_action:
      - switch.turn_off: mmwave_sensor
      - delay: 1s
      - uart.write: !lambda |-
          std::string mss = "setLatency " + to_string(id(mmwave_on_latency).state) + " " + to_string(id(mmwave_off_latency).state);
          return std::vector<unsigned char>(mss.begin(), mss.end());
      - delay: 1s
      - uart.write: "saveCfg 0x45670123 0xCDEF89AB 0x956128C6 0xDF54AC89"
      - delay: 1s
      - switch.turn_on: mmwave_sensor

  - platform: template
    name: mmWave on latency
    icon: mdi:clock-start
    id: mmwave_on_latency
    entity_category: config
    min_value: 0
    max_value: 60
    initial_value: 0
    optimistic: true
    step: 0.5
    restore_value: true
    unit_of_measurement: seconds
    mode: slider
    set_action:
      - switch.turn_off: mmwave_sensor
      - delay: 1s
      - uart.write: !lambda |-
          std::string mss = "setLatency " + to_string(id(mmwave_on_latency).state) + " " + to_string(id(mmwave_off_latency).state);
          return std::vector<unsigned char>(mss.begin(), mss.end());
      - delay: 1s
      - uart.write: "saveCfg 0x45670123 0xCDEF89AB 0x956128C6 0xDF54AC89"
      - delay: 1s
      - switch.turn_on: mmwave_sensor

  - platform: template
    name: mmWave sensitivity
    icon: mdi:target-variant
    id: mmwave_sensitivity
    entity_category: config
    min_value: 0
    max_value: 9
    initial_value: 7
    optimistic: true
    step: 1
    restore_value: true
    set_action:
      - switch.turn_off: mmwave_sensor
      - delay: 1s
      - uart.write:
          !lambda std::string mss = "setSensitivity " + to_string((int)x);
          return std::vector<unsigned char>(mss.begin(), mss.end());
      - delay: 1s
      - uart.write: "saveConfig"
      - delay: 1s
      - switch.turn_on: mmwave_sensor

  - platform: template
    name: "Temperature Offset"
    id: temperature_offset_ui
    unit_of_measurement: "°C"
    min_value: -20
    max_value: 20
    step: 0.1
    mode: box
    update_interval: never
    optimistic: true
    restore_value: true
    initial_value: 0
    icon: "mdi:thermometer"
    entity_category: config
    on_value:
      - lambda: 'id(shtc3_sensor).update();'
  - platform: template
    name: "Humidity Offset"
    id: humidity_offset_ui
    unit_of_measurement: "%"
    min_value: -50
    max_value: 50
    step: 0.1
    mode: box
    update_interval: never
    optimistic: true
    restore_value: true
    initial_value: 0
    icon: "mdi:water-percent"
    entity_category: config
    on_value:
      - lambda: 'id(shtc3_sensor).update();'
  - platform: template
    name: "Illuminance Offset"
    id: illuminance_offset_ui
    unit_of_measurement: "lx"
    min_value: -50
    max_value: 50
    step: 1
    mode: box
    update_interval: never
    optimistic: true
    restore_value: true
    initial_value: 0
    icon: "mdi:brightness-5"
    entity_category: config
    on_value:
      - lambda: 'id(illuminance_sensor).update();'

button:
  - platform: restart
    id: restart_internal
    entity_category: config
    internal: true
  - platform: template
    name: Restart mmWave sensor
    id: restart_mmwave
    entity_category: config
    internal: true
    on_press:
      - uart.write: "resetSystem"
  - platform: template
    name: Restart
    icon: mdi:restart
    entity_category: config
    disabled_by_default: True
    on_press:
      - button.press: restart_mmwave
      - button.press: restart_internal
  - platform: safe_mode
    internal: false
    name: Safe mode
    entity_category: config
    disabled_by_default: True
  - platform: template
    name: Factory reset mmWave
    icon: mdi:cog-counterclockwise
    id: factory_reset_mmwave
    internal: ${factory_reset_disabled}
    entity_category: config
    on_press:
      - switch.turn_off: mmwave_sensor
      - delay: 1s
      - uart.write: "resetCfg"
      - delay: 3s
      - switch.turn_on: mmwave_sensor
  - platform: template
    name: mmWave Set Distance
    id: mmwave_set_distance
    icon: "mdi:arrow-left-right"
    entity_category: config
    on_press:
      - switch.turn_off: mmwave_sensor
      - delay: 1s
      - uart.write: !lambda
          int s1 = (int)ceil(id(mmwave_zone_1_start).state / 15.0);
          int e1 = (int)ceil(id(mmwave_zone_1_end).state / 15.0);
          int s2 = (int)ceil(id(mmwave_zone_2_start).state / 15.0);
          int e2 = (int)ceil(id(mmwave_zone_2_end).state / 15.0);
          int s3 = (int)ceil(id(mmwave_zone_3_start).state / 15.0);
          int e3 = (int)ceil(id(mmwave_zone_3_end).state / 15.0);
          int s4 = (int)ceil(id(mmwave_zone_4_start).state / 15.0);
          int e4 = (int)ceil(id(mmwave_zone_4_end).state / 15.0);

          std::string cmd = "detRangeCfg -1";

          if(s1 < e1) {
            cmd += " " + to_string(s1) + " " + to_string(e1);
          }
          if(s2 > e1 && s2 < e2) {
            cmd += " " + to_string(s2) + " " + to_string(e2);
          }
          if(s3 > e2 && s3 < e3) {
            cmd += " " + to_string(s3) + " " + to_string(e3);
          }
          if(s4 > e3 && s4 < e4) {
            cmd += " " + to_string(s4) + " " + to_string(e4);
          }
          
          if(cmd != "detRangeCfg -1") {
            std::vector<unsigned char> cmd_vec(cmd.begin(), cmd.end());
            ESP_LOGI("set_mmwave_distance", "Sending command to sensor %s", cmd.c_str());
            id(distance_zone_status).publish_state("Successfully sent to sensor! " + cmd.substr(14));
            return cmd_vec;
          } else {
            ESP_LOGE("set_mmwave_distance", "No valid segments configured. Please adjust the sliders.");
            id(distance_zone_status).publish_state("No valid segments configured. Please adjust the sliders.");
            return std::vector<unsigned char>();
          }
      - delay: 1s
      - uart.write: "saveCfg 0x45670123 0xCDEF89AB 0x956128C6 0xDF54AC89"
      - delay: 1s
      - switch.turn_on: mmwave_sensor

text_sensor:
  - platform: template
    name: "Distance Zones Status"
    id: "distance_zone_status"

custom_component:
- lambda: |-
    auto my_custom = new Sen0395Distance(id(uart_bus));
    return {my_custom};