Skip to content

Latest commit

 

History

History
711 lines (703 loc) · 62.6 KB

CHANGELOG.md

File metadata and controls

711 lines (703 loc) · 62.6 KB

Changelog

0.8.0

  1. [SOUND] Pack sounds use new APU model variables - @tracernz (Mike)
  2. [EFB] Added in-flight refueling capabilities - @Taz5150 (TazX [Z+2]#0405)
  3. [EFB] Moved setting for MCDU keyboard input into the EFB - @2hwk (2Cas#1022)
  4. [HYD] Placeholder simvar to trigger ptu high pitch sound - @crocket6 (crocket)
  5. [EFB] Neatened up failure buttons on failure page - @nathanmayall (AbsoluteNath#9406)
  6. [SOUND] Added PTU sounds in correct conditions - @hotshotp (Boris)
  7. [ADIRS] Use heading as track at low ground speeds - @beheh (Benedict Etzel)
  8. [PFD] Fix mach number flickering between mach 0.45 and 0.5 - @beheh (Benedict Etzel)
  9. [AP] Improved flight director guidance
  10. [FBW] Improved turn coodination in manual flight - @aguther (Andreas Guther)
  11. [FBW] Roll normal law is no longer using elasticity table - @IbrahimK42 (IbrahimK42)
  12. [AP] Improved LOC law and condition - @aguther (Andreas Guther)
  13. [AP] Improved LOC ALIGN law - @aguther (Andreas Guther)
  14. [AP] improved G/S law - @aguther (Andreas Guther)
  15. [AP] Allow V/S push and pull during ALT CPT - @aguther (Andreas Guther)
  16. [AP] Soft Altitude mode uses now FMGC flight phase to detect cruise situation
  17. [MCDU] Fix GPS ground speed monitor to show ground speed in knots rather than meters/second - @donstim (donbikes#4084)

0.7.0

  1. [HYD] First building block, more to come. Hydraulics do not impact the sim YET. - @crocket6 (crocket)
  2. [HYD] Connected hydraulics element to electrical buses. - @crocket6 (crocket)
  3. [ENGINE] Fixed fuel consumption model - @Taz5150 (TazX [Z+2]#0405)
  4. [ENGINE] Fixed fuel flow being 0 at Start-up - @Taz5150 (TazX [Z+2]#0405)
  5. [MCDU] Fixed input and display issues on PERF/W&B and INIT pages - @felixharnstrom (Felix Härnström)
  6. [MCDU] Progress page only shows GPS Primary when it should - @Username23-23 (NONAmr2433 #8777)
  7. [ND] Add VOR/ADF needles to ILS arc display - @tracernz (Mike)
  8. [MCDU] Add hard sign to temp field on PERF APPR, remove FLS/FINAL APP, adjust alignment - @tracernz (Mike)
  9. [ADIRS] Add on delay for ON BAT light - @tracernz (Mike)
  10. [MISC] Added 3D brake gauge - @tyler58546 (tyler58546), @DarkOfNova (DarkOfNova)
  11. [ECAM] Refactor flight control page to use React - @RichardPilbery (tricky_dicky#3571)
  12. [ELEC] The BCL commands the BAT contactor be closed when the BAT push button is moved from OFF to AUTO - @davidwalschots (David Walschots)
  13. [MCDU] Implement BRG/DIST function on PROG page - @tracernz (Mike)
  14. [MCDU] Fix max page number on duplicate waypoint selection - @tracernz (Mike)
  15. [MCDU] Show max distance of 9999 NM on duplicate waypoint selection - @tracernz (Mike)
  16. [DU] Display units only run their self-test when unpowered over 10 seconds - @davidwalschots (David Walschots)
  17. [DISPLAYS] RMP backlight, ATC and RTPI font color and backlight - @marcman86 (marcman86#4907)
  18. [RMP] Enabled LED indicators when testing ANN lights - @ImenesFBW (Imenes)
  19. [EFB] Fix fuel tank capacity values - @donstim (donbikes#4084)
  20. [MISC] Fixed EVAC button animation - @tyler58546 (tyler58546)
  21. [ECAM] Improved alternating of igniters - @joseph-tobin (joseph#1001)
  22. [TEXTURE] Upscaled the existing FBW livery to 8K - @FoxinTale (Aubrey)
  23. [CHECKLISTS] Added missing Fuel Pumps checkpoint - @sidnov (sidnov#8337)
  24. [ELEC] All external and internal lights are powered by the correct electrical bus. - @davidwalschots (David Walschots)
  25. [ELEC] Equipment such as wipers and display units are powered by the correct electrical bus - @davidwalschots (David Walschots)
  26. [ELEC] Button and indication lights are powered by the correct electrical bus - @davidwalschots (David Walschots)
  27. [ELEC] Engines keep running when electrical systems are lost - @davidwalschots (David Walschots)
  28. [ELEC] When turning the BAT pb to AUTO, the battery charge limiter has a 1 second startup delay - @davidwalschots (David Walschots)
  29. [MCDU] Fixed entry of in.Hg baro settings ending in zero - @tracernz(Mike)
  30. [PFD] Reimplemented and improved PFD in react - @lukecologne (lukecologne#1156)
  31. [FBW] New custom fly-by-wire system - @aguther (Andreas Guther)
  32. [AUTOPILOT] New custom autopilot system - @aguther (Andreas Guther)
  33. [AUTOTHRUST] New custom autothrust system - @aguther (Andreas Guther)
  34. [ENGINE] New engine model with custom EGT and fuel flow logic - @Taz5150 (TazX [Z+2]#0405)
  35. [FLIGHTMODEL] New flight model adapted to new engine model - @donstim (donbikes#4084)
  36. [FLIGHTMODEL] Added separated flaps position for 1 and 1+F - @donstim (donbikes#4084), @aguther (Andreas Guther)
  37. [FLIGHTMODEL] Custom spoiler logic and realistic impact on flight model - @donstim (donbikes#4084), @aguther (Andreas Guther)
  38. [EFB] Added throttle calibration for autothrust system - @Saschl (saschl#9432)
  39. [ECAM] Add REFUELG message to upper ECAM when refuelling via fuel page on EFB - @sidnov (sidnov#8337)
  40. [EFB] Disabled LINK MCDU button on dashboard page - @ExampleWasTaken (ExampleWasTaken#0886)
  41. [MCDU] Do not show duplicate names page with 1 option, fix return key - @tracernz (Mike)
  42. [MCDU] Removed invalid chars from- and updated AOC TELEX warning message - @ExampleWasTaken (ExampleWasTaken#0886)
  43. [ND] Fix Behaviour of TAS and Wind Info displayed inflight and on Take-Off - @ChruutvoLuzi (ChruutvoLuzi#8902)
  44. [SOUND] Improved engine, ground roll, and ambience sounds - @hotshotp (Boris)
  45. [SOUND] Added CVR test sound - @hotshotp (Boris)
  46. [ELEC] Pushing the GEN 1 LINE push button to OFF opens the GEN 1 contactor - @davidwalschots (David Walschots)
  47. [ELEC] Add ground service electrical buses - @davidwalschots (David Walschots)
  48. [FLIGHTMODEL] Fixed excessive weathervaning stability - @donstim (donbikes#4084)
  49. [AUTOPILOT] Improved ROLL OUT and G/S laws - @aguther (Andreas Guther)
  50. [FMGC] Added VS descent phase initiation - @MisterChocker (Leon)
  51. [SOUND] Added glareshield chrono button sound - @ImenesFBW (Imenes)
  52. [MCDU] Disallow ATIS request when no airport is specified - @ExampleWasTaken (ExampleWasTaken#0886)
  53. [FBW] New high angle of attack and high speed protection - @lukecologne (luke), @aguther (Andreas Guther)
  54. [FBW] Adapt pitch attitude protection for configuration - @aguther (Andreas Guther)
  55. [FBW] Realistic rudder pedals animation only following pilot input or trim - @aguther (Andreas Guther)
  56. [FCU] Added more custom events that can be triggered via SimConnect to control the FCU - @aguther (Andreas Guther)
  57. [MISC] Autobrake can be armed via keybindings - @Saschl (saschl#9432)
  58. [FWC] Fix pushing of MASTER WARN and MASTER CAUT not disabling aural warnings - @davidwalschots (David Walschots)
  59. [ELEC] EMER ELEC PWR overhead MAN ON push button triggers emergency generator start (RAT not yet simulated) - @davidwalschots (David Walschots)
  60. [ELEC] RAT & EMER GEN fault light illuminates when applicable - @davidwalschots (David Walschots)
  61. [FBW] Realistic rudder trim deflection and reset rate - @aguther (Andreas Guther)
  62. [FBW] Elevator trim wheels no longer move when stop is reached - @aguther (Andreas Guther)
  63. [AP] Improved V/S and FPA speed protection mode - @aguther (Andreas Guther)
  64. [MISC] Seatbelt sign state can be toggled via external events - @Saschl (saschl#9432)
  65. [MISC] Standby instrument brightness buttons can now be held down rather than pressed to -/+ brightness - @2hwk (2Cas#1022)
  66. [AP] Fixed and improved mode transitions related to LAND modes - @aguther (Andreas Guther)
  67. [ENGINE] Adapt engine IDLE N1 based on environmental conditions - @Taz5150 (TazX [Z+2]#0405), @aguther (Andreas Guther)
  68. [ECAM] Added hydraulics page on SD - @RichardPilbery (tricky_dicky[Z+0]#3571)
  69. [ND] ND Waypoint Icon Size, Icon Outlines, Airplane Icon Color and Outline - @marcman86 (marcman86#4907)
  70. [ELEC] ENG FIRE push button deactivates IDG - @davidwalschots (David Walschots)
  71. [AP] Improved OP CLB/DES, CLB/DES speed hold characteristics - @aguther (Andreas Guther)
  72. [MCDU] Fixed sometimes bad error message on crz fl entry - @MisterChocker (Leon)
  73. [ECP] Corrected EMER CANC ECAM button emissive behavior - @ImenesFBW (Imenes)
  74. [ECAM] Change flight control page to use hydraulic simulation vars - @lukecologne (luke)
  75. [HYD] Blue electric pump override button changed to momentary latched - @Crocket63 (crocket)
  76. [LIGHTS] Add OVHD ANN LT DIM functionality - @bouveng (Johan Bouveng)
  77. [PFD] Add baro setting flash when passing TA/TL - @lukecologne (luke)
  78. [FLIGHT MODEL] Fix flap transition bounce - @donstim (donbikes#4084)
  79. [FBW] Added visual aileron droop and anti-droop - @aguther (Andreas Guther)
  80. [FLIGHT MODEL] Force usage of modern flight model - @aguther (Andreas Guther)
  81. [MODEL] Reverse thrust animation no longer proportional to thrust lever position - @tracernz (Mike)
  82. [HYD] Brakes are now connected to hydraulic system - @crocket63 (crocket)
  83. [ADIRS] Fix ADIRUs not aligned starting on runway - @davidwalschots (David Walschots)
  84. [FLIGHT MODEL] Adds new parameters introduced by SU4 - @donstim (donbikes#4084)
  85. [LIGHTS] Correct Korry button labels - @tracernz (Mike), @tyler58546 (tyler58546)
  86. [OVHD] Correct EVAC button behaviours - @tracernz (Mike)
  87. [OVHD] Fix invisible fault emissive decal on centre fuel pump 2 - @tracernz (Mike)
  88. [VFX] Add APU exhaust heat blur effect - @wpine215 (Iceman)
  89. [MCDU] Improve robustness of Lat/Lon & P-B/P-B input parsing - @tracernz (Mike)
  90. [RTPI] Add separate RTPI font file - @sidnov (Sid)
  91. [AP+PFD] Added triple click and FMA mode reversion logic - @aguther (Andreas Guther)
  92. [AP] Automatically arm NAV on ground when flight plan becomes available - @aguther (Andreas Guther)
  93. [FCU] Automatically connect flight directors when FCU is powered on - @aguther (Andreas Guther)
  94. [HYD] New custom auto brakes replace default one - @crocket63 (crocket)
  95. [MISC] Chrono auto-brightness - @sidnov (Sid)
  96. [AP] Improved disengage conditions for ROLL OUT and when excessive pitch or roll attitude - @aguther (Andreas Guther)
  97. [FBW] Improved ground spoiler logic - @aguther (Andreas Guther)
  98. [ATHR] Fixed incorrect THR LK activation when A/THR disconnect buttons have been used - @aguther (Andreas Guther)
  99. [ECAM] Convert Cruise page to React - @RichardPilbery (tricky_dicky[Z+0]#3571)
  100. [ATHR] Support flight director off take-off procedure - @aguther (Andreas Guther)
  101. [MCDU] Fixed tropo entry validation - @MisterChocker (Leon)
  102. [AP/FMGC] Improved managed speed and V2 validity - @aguther (Andreas Guther)
  103. [FCU] Init FCU with SPD 100 kn, HDG = 0° and ALT 100 ft - @aguther (Andreas Guther)
  104. [FBW] Inhibit alpha floor and protection law for 10 s after flight start / plane reload - @aguther (Andreas Guther)
  105. [FLIGHT MODEL] Increased gear drag, reduced flap drag - @donstim (donbikes#4084)
  106. [ATHR/FADEC] Fixed potential engagement of reverse thrust in flight - @aguther (Andreas Guther)
  107. [ECAM] Fix REFUELG message being shown on ECAM even when refueling is complete - @BlueberryKing (BlueberryKing#6641)
  108. [MCDU] ILS auto-tuning for departure and improved for approach - @tracernz (Mike)
  109. [MCDU] Added clear scratchpad on CLR held down - @tracernz (Mike) and @MisterChocker (Leon)
  110. [MCDU] Fixed performance page refresh on flight phase transition - @MisterChocker (Leon)
  111. [FMGC] Added reset of fmgc variables - @MisterChocker (Leon)
  112. [ATHR] Fixed permanent A/THR disconnect (15s press) not being able to activate with 3D button on thrust levers - @aguther (Andreas Guther)
  113. [ND] TCAS symbols correctly display in 10, 20, 40nm ARC/ROSE views + bug fixes - @2hwk (2Cas#1022)
  114. [ENGINE] Cold Engine start-up model (primary parameters) - @Taz5150 (TazX [Z+2]#0405)
  115. [ATSU] Aircraft can only be fueled when on ground - @erso44 (Ersin Karakilic)
  116. [ATHR/FWC] Adapted take-off A/THR engagement and added thrust lever not set warning - @aguther (Andreas Guther)
  117. [TEXTURE] Added a white dot to the test button and corrected DISCH alignment on the fire panel - @ImenesFBW (Imenes)
  118. [ECAM] Added ISA DEV to ECAM - @BlueberryKing (BlueberryKing#6641)
  119. [AOC] Reworked airport handling on AOC Weather Request Page - @MisterChocker (Leon)
  120. [EFB] Add flypad themed simbrief maps to EFB/OFP - @bouveng (Johan Bouveng)
  121. [SOUND] Added blue and yellow electric hydraulic pump sounds - @hotshotp (Boris)
  122. [SOUND] Further improved ambience and engine sounds - @hotshotp (Boris)
  123. [ELEC] Improve electrical system implementation to allow for implementing advanced scenarios - @davidwalschots (David Walschots)
  124. [MCDU] MCDU accepts direct keyboard input (enabled by new option in A32NX Realism Settings). - @2hwk (2Cas#1022)
  125. [ISIS] Implement automatic brightness adjustment for standby instrument - @BlueberryKing (BlueberryKing#6641)
  126. [HYD] Fixed catering door movement wrongly starting the yellow elec pump - @crocket63 (crocket)
  127. [SOUND] Added custom FCU and GPWS, push-button sounds @ImenesFBW - (Imenes)
  128. [ECAM] Implement amber REV message while reverser doors are in transit. - @BlueberryKing (BlueberryKing#6641)
  129. [HYD] Switched hydraulics to new engine model simvars - @Crocket63 (crocket)
  130. [LIGHTS] New potentiometer for lights, emissives and screens. - @bouveng (Johan Bouveng)
  131. [SOUND] Improved engine startup sound and added wiper sounds - @hotshotp (Boris)
  132. [FCU] Fix FCU DISPLAY AC1 BUS power. - @bouveng (Johan Bouveng)
  133. [HYD] Fixed autobrake inputs response for rotating knob type controllers - @Crocket63 (crocket)
  134. [ECAM] Autoswitch ECAM pages use proper FWC phase logic - @2hwk (2Cas#1022)
  135. [HYD] Added basic LGCIU implementation with per wheel weight on wheels sensors - @Crocket63 (crocket)
  136. [MISC] Improved logic for chronometer operations - @sidnov (Sid)
  137. [DISPLAYS] Fix Self-Test no longer triggers when spawning from an in-flight state i.e. cruise/landing/takeoff on runway - @2hwk (2Cas#1022)
  138. [SOUND] Improved engine startup, idle sounds, and cabin wind - @hotshotp (Boris)
  139. [MODEL] Swap EFIS WPT and VOR D buttons - @tracernz (Mike)
  140. [MODEL] Fix no-smoking/no-PED switch animation - @tracernz (Mike)
  141. [DISPLAYS] Add pixelated screens - @bouveng (Johan Bouveng)
  142. [ADIRS] Simple ATT mode implementation (does not yet include HDG entry) - @davidwalschots (David Walschots)
  143. [ADIRS] The longest instead of the shortest remaining alignment time is displayed on the upper ECAM - @davidwalschots (David Walschots)
  144. [ADIRS] IR1, IR3, or IR2 can be pushed OFF to disconnect output of IR information from that particular ADIRU - @davidwalschots (David Walschots)
  145. [ADIRS] ADR1, ADR3, or ADR2 can be pushed OFF to disconnect output of ADR information from that particular ADIRU - @davidwalschots (David Walschots)
  146. [ADIRS] GPS PRIMARY LOST is only indicated when none of the IRs are aligned or ON - @davidwalschots (David Walschots)
  147. [ADIRS] Switching panel's ATT HDG and AIR DATA knobs functionality - @davidwalschots (David Walschots)
  148. [ADIRS] Upper ECAM shows IR x IN ATT ALIGN when any ADIRU is in ATT mode alignment - @davidwalschots (David Walschots)
  149. [ADIRS] Wind, TAS, and GS indications depend on availability of IR and ADR data - @davidwalschots (David Walschots)
  150. [ADIRS] SAT, TAT, and ISA indications depend on the selected ADR (1 or 3) - @davidwalschots (David Walschots)
  151. [PRESS] First implementation of automatic pressurization system - @MJuhe (Miquel)
  152. [MISC] Added annunciator lights to interactive checklist - @oim1 (oim)
  153. [MISC] Workaround for altitude issues of MSFS - @aguther (Andreas Guther)
  154. [MODEL] Un-mirror sharklet textures - @tracernz (Mike)
  155. [DISPLAYS] Improved pixelated screens, only appears when camera is close to displays - @2hwk (2Cas#1022)
  156. [MISC] Change back to airliner hud in external view for SU5 - @donstim (donbikes#4084)
  157. [TEXTURE] Improved cockpit textures and screen reflections - @MoreRightRudder (Mike), @tyler58546 (tyler58546)
  158. [MCDU] DEST EFOB and ALT DEST EFOB amber coloring fixed - @erso44 (Ersin Karakilic)
  159. [EFB] Add tabbed settings page to EFB - @ErickSharp (Erick [Z-6]#6484)
  160. [FCU] Added LVAR for selected speed and only fill active LVAR for VS or FPA mode
  161. [MODEL] Removed unused material to fix potential crash to desktop - @aguther (Andreas Guther)
  162. [ARCH] Failures are supported - @davidwalschots (David Walschots)
  163. [HYD] Updated fix for autobrake rotating knob type controllers - @Crocket63 (crocket)
  164. [MODEL] Fix Cockpit Door Video Toggle - @sidnov (Sid)
  165. [MISC] Added JP, FI, SE, NO and NL language support for tooltips. - @kpotschi (MelodyConnor)
  166. [ECAM] Rewrite fuel page for React - @Benjozork (Benjamin Dupont) and @RichardPilbery (tricky_dicky[Z+0]#3571)
  167. [LIGHTS] Added workaround for missing lighting definitions in Asobo templates - @cloudynetwork (Peter Joseph)
  168. [MODEL] Change ECAM button lights to white - @tracernz (Mike)
  169. [GPWS] Fix "retard" callout so it plays at less than 20 ft radio altitude with autopilot off - @donstim (donbikes#4084)
  170. [FADAC] Fix "fuel used. Fuel used is reset to zero when an engine is restarted on the gound. - john P Maguire#9027
  171. [SOUNDS] Replace all remaining Asobo sounds - @hotshotp (boris#8008)
  172. [SOUNDS] Implement an early version of closed vs open cockpit door sounds - @hotshotp (boris#8008)
  173. [OVHD] CVR ground test auto-resets on first engine start - @tracernz (Mike)
  174. [GENERAL] Added Notification to user via popup + notification when settings change requires aircraft reload. - @2hwk (2Cas#1022
  175. [ECAM] ENG oil temperature amber while below takeoff minimum - @tracernz (Mike)
  176. [MISC] Sync settings across instruments - @tracernz (Mike)
  177. [MCDU] Remove some settings from MCDU the are now in the FlyPad - @tracernz (Mike)
  178. [EFB] Persist sound and EFB settings correctly - @tracernz (Mike)
  179. [FLIGHT MODEL] Fixed station locations and loads consistent with real A320 W&B manual - @ghosh9691
  180. [MCDU] Boarding and W/B AOC Pages update with Simbrief Integration - @viniciusfont

0.6.0

  1. [CDU] Added WIND page - @tyler58546 (tyler58546)
  2. [SOUND] Improved engine startup and fly by sound - @hotshotp (Boris#9134)
  3. [SOUND] Added new vent test and ext pwr relay random sounds - @hotshotp (Boris#9134)
  4. [SOUND] Seatbelt sign now has a delay - @hotshotp (Boris#9134)
  5. [PFD] Added auto brake status to FMA - @MisterChocker (Leon)
  6. [UTILS] Added Vfe and Vfen table - @MisterChocker (Leon)
  7. [PFD] Fixed wrong Vfe and Vfen indication - @MisterChocker (Leon)
  8. [SOUND] Reworked interior and exterior apu sound - @hotshotp (Boris#9134)
  9. [SOUND] Added new MCDU button sounds - @hotshotp (Boris#9134)
  10. [GENERAL] Added TRK/FPA mode including FPV/FPD on PFD - @theomessin (Theodore Messinezis)
  11. [ECAM] Added missing unit conversion to cruise and engine page - @MisterChocker (Leon)
  12. [MCDU] Horizontal slew arrows now appear in the correct location - @tyler58546 (tyler58546)
  13. [MCDU] Vertical slew arrows have been added on pages that can be scrolled - @tyler58546 (tyler58546)
  14. [MCDU] The "F-PLN" title has been removed from the flight plan page - @tyler58546 (tyler58546)
  15. [MCDU] The flight plan page now shows the flight number in the top left corner - @tyler58546 (tyler58546)
  16. [MCDU] The flight plan page now shows "TMPY" in the top line when displaying the temporary flight plan - @tyler58546 (tyler58546)
  17. [MCDU] The "FROM" indicator on the flight plan page is now in the top line - @tyler58546 (tyler58546)
  18. [UTILS] Added speed conversions and fixed Mmo - @MisterChocker (Leon)
  19. [MISC] Fixed cockpit door button states - @ImenesFBW (Imenes)
  20. [TEXTURE] Various UV/texture fixes - @tyler58546 (tyler58546)
  21. [CHECKLISTS] Removed various outdated INOPs from the checklist - @Venorcis (Venorcis)
  22. [MCDU] Improved scratchpad handling on - @MisterChocker (Leon)
  23. [ADIRS] Added "ON BAT" light to ADIRS panel - @tyler58546 (tyler58546)
  24. [MCDU] Fixed INIT-A CRZ Temp insert - @MisterChocker (Leon)
  25. [MCDU] Fixed APPR/GO AROUND page order - @beheh (Benedict Etzel)
  26. [OPTIONS] Changed unit option changes only effective after aircraft reload - @MisterChocker (Leon)
  27. [ECAM] Fixed engineering mode overlay displaying on upper ECAM in some cases - @davidwalschots (David Walschots)
  28. [MCDU] Fixed "V1/VR/V2 DISAGREE" check - @MisterChocker (Leon)
  29. [FLIGHTMODEL] Fixed structural load factor limitations - @donstim (donbikes#4084)
  30. [ECAM] Improved Ecam Memo TO Flaps and TO Config. Allows for Config 3 TO - @MisterChocker (Leon)
  31. [DISPLAYS] Optimize performance by throttling instrument updates - @XSJoJo (Jorim Jaggi)
  32. [ECAM] Added F/CTL FLAP/MCDU DISAGREE check - @MisterChocker (Leon)
  33. [MISC] Changed AIRCOND knobs starting position to 12 o'clock - @ImenesFBW (Imenes)
  34. [FCU] Fixed baro knob overlapping text and emissive removed - @DarkOfNova (DarkOfNova), @ImenesFBW (Imenes)
  35. [SOUND] Reworked engine spool up and startup sounds - @hotshotp (Boris)
  36. [SOUND] Reworked pack sounds - @hotshotp (Boris)
  37. [SOUND] Reworked touchdown sounds - @hotshotp (Boris)
  38. [SWITCHES] Make necessary push buttons momentary - @Benjozork (Benjamin Dupont)
  39. [SWITCHES] Change push button sound - @Benjozork (Benjamin Dupont)
  40. [SWITCHES] Change light switch sound - @Benjozork (Benjamin Dupont)
  41. [MISC] Added printer - @tyler58546 (tyler58546), @DarkOfNova (DarkOfNova)
  42. [ECAM] Added CONF/FLAPS 3 memos when GPWS LDG FLAPS 3 enabled - @tracernz (Mike)
  43. [MISC] Disabled left tiller deflection emissive - @ImenesFBW (Imenes)
  44. [CDU] Add landing config selection (CONF3 or FULL) on Perf Appr page - @tracernz (Mike)
  45. [TEXTURE] Added inHg/hPa above the QNH knob - @ImenesFBW (Imenes)
  46. [MCDU] Vapp entry/clear display and error improvements - @tracernz (Mike)
  47. [TEXTURE] Added throttle lever detent decal and removed extra S from compass - @ImenesFBW (Imenes)
  48. [APU] Realistic start cycle in terms of time, N, and EGT - @davidwalschots (David Walschots)
  49. [APU] Usage of APU GEN and BLEED fluctuates EGT - @davidwalschots (David Walschots)
  50. [APU] APU GEN output appears around 84% N - @davidwalschots (David Walschots)
  51. [APU] Out of range APU GEN output appears in amber - @davidwalschots (David Walschots)
  52. [APU] EGT is rounded to the nearest 5 degrees on the ECAM - @davidwalschots (David Walschots)
  53. [APU] APU is available 2 seconds after 95% N or at 99.5% N - @davidwalschots (David Walschots)
  54. [APU] APU enters cooldown mode when APU BLEED was used in the last two minutes before shutdown - @davidwalschots (David Walschots)
  55. [APU] When APU BLEED is ON and the APU isn't supplying bleed air, the overhead APU BLEED fault light turns on - @davidwalschots (David Walschots)
  56. [APU] The APU automatically shuts down when the left inner fuel tank is empty, unless unlimited fuel is on - @davidwalschots (David Walschots)
  57. [APU] Automatic shutdown triggers FWC cautions on Upper ECAM - @davidwalschots (David Walschots)
  58. [APU] Automatic shutdown causes the APU to be shown as unavailable on SYS - @davidwalschots (David Walschots)
  59. [APU] Releasing the APU FIRE button makes the APU go into emergency shut down - @davidwalschots (David Walschots)
  60. [APU] Emergency shutdown triggers FWC cautions on Upper ECAM - @davidwalschots (David Walschots)
  61. [APU] Emergency shutdown causes the APU to be permanently shown as unavailable on SYS - @davidwalschots (David Walschots)
  62. [APU] BLEED PSI is shown when ADIRS1 on NAV, waiting for alignment is no longer necessary - @davidwalschots (David Walschots)
  63. [APU] BLEED PSI is shown as 0 when the APU bleed air valve is not open, as the pressure transducer is downstream of the valve. - @davidwalschots (David Walschots)
  64. [GPWS] Fixed "too low terrain" warning on 2nd departure - @vkrizan (Viliam)
  65. [RMP] Separate radio management panels for each side and complete rewrite - @theomessin (Theodore Messinezis)
  66. [FLIGHTMODEL] Updated landing gear contact point values to closer match reality - @wpine215 (Iceman) and @donstim (donbikes#4084)
  67. [TEXTURE] Various cockpit decal texture fixes and updates - @ImenesFBW (Imenes)
  68. [MCDU] Rework PERF TAKE OFF page - @beheh (Benedict Etzel)
  69. [SOUND] Fixed FCU knobs sounds - @ImenesFBW (Imenes)
  70. [MCDU] Fix AOC RCVD MSGS scrolling, add arrows, and update on receipt - @tracernz (Mike)
  71. [ECAM] Add TCAS STBY warning - @paul92ilm (Lussion)
  72. [ECAM] Adjusted brake temp algorithm for new wheel sizes - @donstim (donbikes#4084)
  73. [CORE] Fixed approach Vs being used during climb - @MisterChocker (Leon)
  74. [CORE] Fixed Take Off Vls config 3 - @MisterChocker (Leon) and @donstim (donbikes#4084)
  75. [CORE] Fixed Config 3 V2 table - @MisterChocker (Leon)
  76. [MCDU] Added Check TO Data - @MisterChocker (Leon)
  77. [ND] Removed label from smallest circle in arc mode - @tyler58546 (tyler58546)
  78. [MISC] Added glass reflections and dust - @MoreRightRudder (Mike), @tyler58546 (tyler58546)
  79. [CDU] Support coordinate waypoints from SimBrief, various other route import fixes - @pareil6 (pareil6)
  80. [Sound] Reworked exterior engine sounds - @hotshotp (Boris)
  81. [Sound] Improved interior engine sounds - @hotshotp (Boris)
  82. [Sound] Enchanced APU and gear extension/retraction sounds - @hotshotp (Boris)
  83. [MISC] Added coffee cup to cockpit - @tyler58546 (tyler58546), @Pleasure0102 (Pleasure)
  84. [ND] Waypoints on the ND now use the correct font - @tyler58546 (tyler58546)
  85. [MISC] Added custom chronometer font - @tyler58546 (tyler58546)
  86. [RMP] Added custom RMP font - @tyler58546 (tyler58546)
  87. [MCDU] Fixed center runway id displaying on the flightplan page - @SergeySoprykin (SergeyS)
  88. [FCU] Added custom FCU font - @tyler58546 (tyler58546)
  89. [FLIGHTMODEL] Quick fix to flap lift for MSFS update 1.13.16.0 - @donstim (donbikes#4084)
  90. [LIGHTS] Fixed runway spawn postition for cruise/approach/final - @Snapmatics (Harry [Z+2]#9872)
  91. [MISC] Added custom BAT font - @tyler58546 (tyler58546)
  92. [LIGHTS] Fixed runway spawn position for dome light - @Awemeter (Awemeter#7919)
  93. [ENGINE] Ignition Switch should be on "MODE NORM" on the final phase - @Snapmatics (Harry [Z+2]#9872)
  94. [TEXTURE] Updated main landing gear textures - @Inexorable95 (Inexorable)
  95. [MISC] Added brake fan button (with on and hot label) - @Inexorable95 (Inexorable)
  96. [MISC] Better brake cooling simulation (with and without brake fan) - @Inexorable95 (Inexorable)
  97. [MISC] Added registration decal - @tyler58546(tyler58546), @DarkOfNova (DarkOfNova)
  98. [OVHD] Implement even more additional overhead button/switch functionality (MASK MAN ON, EMER ELEC PWR MAN ON, Cargo smoke DISCH, etc.) - @ErickSharp (Erick Torres)
  99. [CDU] Fix ILS frequencies not autofilling - @pareil6 (pareil6)
  100. [EFB] Landing performance calculations page - @matt-winfield (TheMightyMat#0585)
  101. [LIGHTS] Improved Exterior Lights - @Snapmatics (Harry)
  102. [SOUND] Added custom sounds to multiple buttons and Throttle Lever Reverse Locks - @ImenesFBW (Imenes)
  103. [MCDU] Added custom MCDU font - @tyler58546 (tyler58546)
  104. [MISC] Add hangar.flt - @Awemeter (Awemeter#7919)
  105. [TEXTURE] Improved cockpit decal fonts and emissives, and remade various labels in the cockpit. @FoxinTale (Aubrey)
  106. [FWC] Add aural Altitude Alert (C Chord) - @Kimbyeongjang (김병장#7165)
  107. [CAMERA] Added new interior views - @Snapmatics (Harry)
  108. [TEXTURE] Improved cockpit decal fonts and emissives, and remade various labels in the cockpit. @FoxinTale (Aubrey)
  109. [CDU] RADNAV - A manual VOR/ADF ident input is now permament - @St54Kevin
  110. [CDU] RADNAV - ID/Frequency fields now format to correct font size depending on pilot input - @St54Kevin
  111. [CDU] RADNAV - All fields now have correct format display and input restricitons - @St54Kevin
  112. [ECAM] Refactor DOORS/OXY page to use new useSimVars - @RichardPilbery (tricky_dicky[Z+0]#3571)
  113. [LIGHTS] Added ambient light to the cockpit - @ImenesFBW (Imenes)
  114. [MCDU] INIT-B page - Fixed Trip Wind value handling - @SergeySoprykin (SergeyS)
  115. [ECAM] Refactor COND page to use new useSimVars - @RichardPilbery (tricky_dicky[Z+0]#3571)
  116. [ELEC] Basic integrated drive generator implementation - @davidwalschots (David Walschots)
  117. [ELEC] A fully functional ELEC page on the lower ECAM - @davidwalschots (David Walschots)
  118. [ELEC] Contactor logic is fully modelled - @davidwalschots (David Walschots)
  119. [ELEC] GEN 1 and GEN 2 have priority over the APU and EXT PWR - @davidwalschots (David Walschots)
  120. [ELEC] EXT PWR has priority over the APU - @davidwalschots (David Walschots)
  121. [ELEC] When a single engine generator is active, it powers both AC BUS 1 and 2 - @davidwalschots (David Walschots)
  122. [ELEC] When only the APU is active, it powers both AC BUS 1 and 2 - @davidwalschots (David Walschots)
  123. [ELEC] When only EXT PWR is active, it powers both AC BUS 1 and 2 - @davidwalschots (David Walschots)
  124. [ELEC] When the BUS TIE push button is OFF, GEN n can only power AC BUS n - @davidwalschots (David Walschots)
  125. [ELEC] When the BUS TIE push button is OFF, APU and EXT PWR cannot power the aircraft - @davidwalschots (David Walschots)
  126. [ELEC] When the APU GEN push button is OFF, the APU cannot power the aircraft - @davidwalschots (David Walschots)
  127. [ELEC] When the EXT PWR push button is OFF, EXT PWR cannot power the aircraft - @davidwalschots (David Walschots)
  128. [ELEC] When the GEN n push button is OFF, GEN n cannot power the aircraft - @davidwalschots (David Walschots)
  129. [ELEC] When the IDG n push button is RELEASED, GEN n cannot power the aircraft - @davidwalschots (David Walschots)
  130. [ELEC] When AC BUS 1 is powered, it powers AC ESS BUS - @davidwalschots (David Walschots)
  131. [ELEC] When AC BUS 1 is unpowered and AC BUS 2 is powered, AC ESS BUS is automatically powered by AC BUS 2 after three seconds - @davidwalschots (David Walschots)
  132. [ELEC] When AC BUS 1 becomes powered after being unpowered, AC ESS BUS is powered by AC BUS 1 without delay - @davidwalschots (David Walschots)
  133. [ELEC] When AC ESS FEED push button is set to ALTN, AC ESS BUS is powered by AC BUS 2 without delay - @davidwalschots (David Walschots)
  134. [ELEC] In normal conditions, TR 1 supplies power to DC BUS 1, DC BAT BUS, and DC ESS BUS - @davidwalschots (David Walschots)
  135. [ELEC] In normal conditions, TR 2 supplies power to DC BUS 2 - @davidwalschots (David Walschots)
  136. [ELEC] When TR 1 is unavailable, TR 2 supplies power to DC BUS 2, DC BAT BUS, and DC BUS 1 - @davidwalschots (David Walschots)
  137. [ELEC] When TR 2 is unavailable, TR 1 supplies power to DC BUS 1, DC BAT BUS, and DC BUS 2 - @davidwalschots (David Walschots)
  138. [ELEC] When TR n is unavailable, TR ESS supplies power to DC ESS BUS - @davidwalschots (David Walschots)
  139. [ELEC] Above 100 knots, when TR 1 + 2 are unavailable, DC BAT BUS is unpowered - @davidwalschots (David Walschots)
  140. [ELEC] At or below 100 knots, when TR 1 + 2 are unavailable DC BAT BUS is powered by the batteries - @davidwalschots (David Walschots)
  141. [ELEC] In certain conditions DC ESS BUS is powered by BAT 2 - @davidwalschots (David Walschots)
  142. [ELEC] In certain conditions AC STAT INV BUS is powered by BAT 1 through the static inverter - @davidwalschots (David Walschots)
  143. [ELEC] In certain conditions AC ESS BUS is powered by BAT 1 via the static inverter - @davidwalschots (David Walschots)
  144. [ELEC] When the BAT 1 to static inverter contactor is closed, an arrow with STAT INV appears next to BAT 1 on the ECAM - @davidwalschots (David Walschots)
  145. [ELEC] Both galleys are shed when none of the main power sources (GEN 1, GEN 2, APU GEN, or EXT PWR) is powering the aircraft - @davidwalschots (David Walschots)
  146. [ELEC] The main galley is shed when the aircraft is powered by a single engine generator - @davidwalschots (David Walschots)
  147. [ELEC] The main galley is shed when the aircraft is in flight and supplied by APU GEN only - @davidwalschots (David Walschots)
  148. [ELEC] The main and secondary galley are shed when the COMMERCIAL push button is OFF - @davidwalschots (David Walschots)
  149. [ELEC] The main and secondary galley are shed when the GALY & CAB push button is OFF - @davidwalschots (David Walschots)
  150. [ELEC] When the main or secondary galley is shed GALLEY SHED is indicated on the ECAM - @davidwalschots (David Walschots)
  151. [ELEC] The AC ESS FEED FAULT light illuminates when AC ESS BUS isn't powered - @davidwalschots (David Walschots)
  152. [ELEC] The battery voltage is equal to the ECAM indicated voltage - @davidwalschots (David Walschots)
  153. [ELEC] The legend of buses is displayed in green when powered, amber otherwise - @davidwalschots (David Walschots)
  154. [ELEC] The DC BAT BUS legend becomes amber XX when unpowered - @davidwalschots (David Walschots)
  155. [ELEC] When the BAT n push button is OFF, OFF is indicated. Otherwise the electrical parameters are displayed - @davidwalschots (David Walschots)
  156. [ELEC] When DC BAT BUS powered by batteries, the BAT to DC BAT BUS wire is displayed - @davidwalschots (David Walschots)
  157. [ELEC] Transformer rectifiers legend is white, unless V or A is amber, then it is also amber - @davidwalschots (David Walschots)
  158. [ELEC] When AC BUS 1 or AC BUS 2 are unpowered, the wires leading to TR 1 and TR 2 turn amber - @davidwalschots (David Walschots)
  159. [ELEC] ESS TR arrow and wire appear in green when ESS TR contactor is closed - @davidwalschots (David Walschots)
  160. [ELEC] A basic emergency generator implementation is created, but not yet usable until HYD is implemented - @davidwalschots (David Walschots)
  161. [ELEC] GEN 1 + 2 legend indicates amber OFF when the respective GEN push button is OFF - @davidwalschots (David Walschots)
  162. [ELEC] GEN 1 + 2 indicates electrical parameters - @davidwalschots (David Walschots)
  163. [ELEC] EXT PWR indicates electrical parameters - @davidwalschots (David Walschots)
  164. [ELEC] The static inverter legend is displayed when BAT 1 supplies AC ESS through the static inverter - @davidwalschots (David Walschots)
  165. [ELEC] The static inverter box is displayed when BAT 1 supplies AC ESS through the static inverter - @davidwalschots (David Walschots)
  166. [ELEC] IDG oil outlet temperature is indicated - @davidwalschots (David Walschots)
  167. [ELEC] When the IDG is disconnected, the IDG text becomes amber - @davidwalschots (David Walschots)
  168. [ELEC] When the IDG is disconnected, DISC appears in amber - @davidwalschots (David Walschots)
  169. [ELEC] SHED appears below the AC ESS BUS when AC ESS SHED BUS is unpowered - @davidwalschots (David Walschots)
  170. [ELEC] SHED appears below the DC ESS BUS when DC ESS SHED BUS is unpowered - @davidwalschots (David Walschots)
  171. [MISC] Added EFB cockpit camera view - @tracernz (Mike)
  172. [TEXTURE] Improved overhead panel decals - @ImenesFBW (Imenes)
  173. [MCDU] Import cost index when importing flight plan from SimBrief - @aviadnissel (Aviad)
  174. [FLIGHTMODEL] Revert flaps hotfix due to MSFS hotfix in MSFS update 1.13.17.0 - @donstim (donbikes#4084)
  175. [MISC] Fixed chrono watch colon appearance - @SergeySoprykin (SergeyS)
  176. [MCDU] Fixed options page text overlap - @MisterChocker (Leon)
  177. [CDU] Reworked Flight Phase system - @MisterChocker (Leon)
  178. [MISC] Fixed button labels not showing when unlit - @ImenesFBW (Imenes)
  179. [EFB] Added functionality to ground services page - @Saschl (saschl#9432)
  180. [MISC] Add cockpit.cfg and fixes flaps full angle in external view - @donstim (donbikes#4084)
  181. [FLIGHTMODEL] Fixed flaps to be compatible with MSFS 1.14.5.0 update - @donstim (donbikes#4084)
  182. [ELEC] Power consumption during different phases of flight - @davidwalschots (David Walschots)
  183. [ELEC] The APU generator's load % is calculated and displayed on the ECAM - @davidwalschots (David Walschots)
  184. [ELEC] The engine generator's load % is calculated and displayed on the ECAM - @davidwalschots (David Walschots)
  185. [ELEC] The static inverter consumes power from BAT 1 - @davidwalschots (David Walschots)
  186. [ELEC] The transformer rectifiers' I is calculated and displayed on the ECAM - @davidwalschots (David Walschots)
  187. [ELEC] The transformer rectifier consumes AC power from the GEN or EXT PWR source powering it - @davidwalschots (David Walschots)
  188. [ELEC] Realistic power consumption of the APU starter motor during APU start - @davidwalschots (David Walschots)
  189. [ELEC] APU GEN, ENG GEN, EMER GEN and EXT PWR contactor only closes when potential and frequency within normal limits - @davidwalschots (David Walschots)
  190. [ELEC] The battery charges and discharges - @davidwalschots (David Walschots)
  191. [ELEC] The battery charge/discharge rate is displayed on the ECAM - @davidwalschots (David Walschots)
  192. [ELEC] When the battery contactor is closed, and discharge I >= 1A for over 15 seconds, an amber arrow from the battery towards the DC BAT BUS is displayed - @davidwalschots (David Walschots)
  193. [ELEC] When the battery contactor is closed, and discharge I >= 1A for over 15 seconds, the I is displayed in amber - @davidwalschots (David Walschots)
  194. [ELEC] When the battery contactor is closed, and charge I >= 1A for over 15 seconds, an arrow from the DC BAT BUS to the battery is displayed - @davidwalschots (David Walschots)
  195. [ELEC] When the battery contactor is closed, and I < 1A, a line without an arrow is displayed between the battery and the DC BAT BUS - @davidwalschots (David Walschots)
  196. [ELEC] When the battery contactor is open. No line is displayed between the battery and the DC BAT BUS - @davidwalschots (David Walschots)
  197. [ELEC] Batteries charge each other in certain situations - @davidwalschots (David Walschots)
  198. [ELEC] DC BAT BUS legend becomes amber when its U <= 25V - @davidwalschots (David Walschots)
  199. [ELEC] Battery charge limiter (BCL) is almost fully implemented - @davidwalschots (David Walschots)
  200. [ELEC] The BCL closes the contactor when BAT U < 26.5V AND BATBUS U > 27V for 225 milliseconds or more - @davidwalschots (David Walschots)
  201. [ELEC] The BCL closes the contactor when the APU MASTER SW is ON - @davidwalschots (David Walschots)
  202. [ELEC] The BCL doesn't close/opens the contactor when in EMER ELEC (AC1 + AC2 unpowered, airspeed > 100kts), and less than 45 seconds have passed since entering EMER ELEC and emergency generator not available - @davidwalschots (David Walschots)
  203. [ELEC] The BCL doesn't close/opens the contactor when in EMER ELEC, and landing gear is not up - @davidwalschots (David Walschots)
  204. [ELEC] The BCL opens the contactor when on the ground and charge I < 4A for 10 seconds, unless APU started - @davidwalschots (David Walschots)
  205. [ELEC] The BCL opens the contactor when speed > 100 knots and charge I < 4A for 30 minutes - @davidwalschots (David Walschots)
  206. [ELEC] Following an APU start the BCL opens the contactor when charge I < 4A for 30 minutes - @davidwalschots (David Walschots)
  207. [ELEC] The BCL opens the contactor when on the ground and BAT U < 23V for 15 seconds (complete discharge protection) - @davidwalschots (David Walschots)
  208. [ELEC] The BCL opens the contactor on entering the EMER ELEC situation - @davidwalschots (David Walschots)
  209. [ELEC] The BCL opens the contactor when in EMER ELEC and over three minutes have passed with the APU MASTER SW in the ON position - @davidwalschots (David Walschots)
  210. [ELEC] When the battery push button is in the OFF position, the BCL is not powered. This means that any conditions which depend on external factors (such as APU start) or the timers for certain conditions are not remembered - @davidwalschots (David Walschots)
  211. [MISC] Added functionality to the console/floor light switch - @ImenesFBW (Imenes)
  212. [EFB] Added EFB fuel page and refuel logic - @Inexorable95 (Inexorable)
  213. [MCDU] Improved Message compatibility for future features - @MisterChocker (Leon)
  214. [MISC] Fixed default positions of RAM AIR, WX Mode, TCAS ALT RPTG and TCAS THRT switches - @tshomas (Shomas#2719)
  215. [MCDU] Fixed waypoint deletion not showing in TMPY flight plan after SU3 - @pareil6 (pareil6)
  216. [CORE] Fixed bug in altitude constraints calculation code - @SergeySoprykin (SergeyS)
  217. [ECAM] Fixed visual error on COND page when hot air pressure valve was off - @RichardPilbery (tricky_dicky#3571)
  218. [MISC] Fixed ecam page cycling when pressing the all button - @Saschl (saschl)
  219. [XPDR] Reimplemented XPDR in react, correct the XPDR code entry behavior - @lukecologne (luke)
  220. [MISC] Reimplemented BAT, rudder trim and Clock in react, add elapsed time feature to clock - @lukecologne (luke)
  221. [ND] Add VOR/ADF needles on ARC display mode - @tracernz (Mike)
  222. [ECAM] Visual improvements on ECAM when cabin pressure MODE SEL is set to manual - @mjuhe (Miquel)
  223. [MCDU] Rework PERF APPR page to Honeywell Rev. 2 standard - @tracernz (Mike)
  224. [FLIGHTMDDEL] Minor improvements to flap drag - @donstim (donbikes#4084)
  225. [EFB] Set font of OFP to monospace - @chkgk (Chriskgk#4359)
  226. [SOUND] Added electrical system sounds - @hotshotp (Boris)
  227. [SOUND] General improvements to cockpit and cabin ambience - @hotshotp (Boris)
  228. [MISC] Added custom loading tips - @Armankir (Arman#5297)
  229. [MCDU] Revised Reserve Weight Calculation and Default weight rule-set added - @Lucky38i (Lucky38i)
  230. [RMP] Added integral illumination to RMP volume knobs - @ImenesFBW (Imenes)
  231. [RMP] Fixed ACP CALL buttons emissive behavior - @ImenesFBW (Imenes)
  232. [TEXTURE] Fixed decal clipping issues on the overhead fuel panel - @ImenesFBW (Imenes)
  233. [TEXTURE] Updated glare shield leather, flyPad holder, tray table, overhead and push-button textures - @MoreRightRudder (Mike)
  234. [MCDU] Progress page shows current flight phase - @Username23-23 (NONAmr2433 #8777)
  235. [TEXTURE] Upscaled the external airframe decals to go nicely with the upscaled livery. @FoxinTale (Aubrey)
  236. [MCDU] Scratchpad is now limited to 22 characters - @tyler58546 (tyler58546)
  237. [MISC] Added Marketplace Data - @kiwi2021 (kiwi2022#0001)
  238. [FBW] Support additional mode to handle rudder axis plus/minus events - @aguther (Andreas Guther)
  239. [FBW] Improved pitch/C* law using streamlined pitch rate target - @aguther (Andreas Guther)
  240. [AP] Improved ALT* law that targets 0.05g capture - @aguther (Andreas Guther)

0.5.2

  1. [CDU] Changing CRZ/DES speed to acknowledge any speed restriction - @Watsi01 (RogePete)
  2. [CDU] Two tiny fixes for flightphase speeds - @Watsi01 (RogePete)
  3. [ND] Flight route now hidden in VOR ROSE and ILS ROSE modes - @2hwk (2Cas#1022)
  4. [MISC] Fixed F/O displays being synced with the captain's displays - @tyler58546 (tyler58546)
  5. [FUEL] Fix outer tank fuel transfer - @donstim - (donbikes#4084)
  6. [FLIGHTMODEL] Preliminary fix for flaps 1 unrecoverable dives - @donstim (donbikes#4084)
  7. [CDU] Fixed altitude button setting the speed on ATC request - @brookemckim (brookemckim)
  8. [API] Fix connection issues when using default ATC and SimBrief - @nistei (nistei#1362)
  9. [CHECKLISTS] Fixed typo in Descent preparation checklist - @ronson1909 (Ronson1909)
  10. [TCAS] Fixed TCAS traffic mode switch not turning - @Saschl (saschl#9432)
  11. [FLIGHTMODEL] Fixed spoiler auto-retract after landing - @donstim - (donbikes#4084)
  12. [DISPLAYS] Fixed background on DCDU and SAI to match other displays.- @nathaninnes (Nathan Innes)
  13. [MCDU] Enabled buttons on the F/O MCDU - @tyler58546 (tyler58546)
  14. [FLIGHTMODEL] Improved fix for flaps 1 unrecoverable dives - @donstim (donbikes#4084)
  15. [ECAM/CORE] Improved flap auto-retraction detection - @MisterChocker (Leon)
  16. [CDU] Error messages now print for invalid trip wind delims - @Lucky38i (Lucky38i)
  17. [TEXTURE] Fixed the overlapping text on the chronometer - @DarkOfNova (DarkOfNova)
  18. [SOUND] Made the altitude callouts louder - @hotshotp (Boris)

0.5.1

  1. [CDU] Allow SimBrief user IDs as well as usernames - @pareil6 (pareil6)
  2. [CDU] Fix incorrect block time display on INIT/REVIEW - @pareil6 (pareil6)
  3. [ECAM] Improved PACKS indication - @MisterChocker (Leon)
  4. [CDU] Improved visuals of CDU Pages - @MisterChocker (Leon)
  5. [CDU] Improved ascent constraint algorithm - @MisterChocker (Leon)
  6. [CDU] Fixed FPLN airways showing as undefined - @pareil6 - (pareil6)
  7. [CDU] Allow SimBrief OFP to override previous flight plan - @pareil6 (pareil6)
  8. [MODEL] Incorporate new Asobo model changes - @pepperoni505 (pepperoni505)

0.5.0

  1. [FLIGHTMODEL] Reworked AOA table - @donstim - (donbikes#4084)
  2. [FLIGHTMODEL] Reworked flaps - @donstim - (donbikes#4084)
  3. [FLIGHTMODEL] Reworked drag/thrust ratio - @donstim - (donbikes#4084)
  4. [ENGINE] Adjusted N1% thrust table - @MisterChocker - (Leon)
  5. [PFD] Added independent calculations for GD, Vls, Vaprot, Vamax, Vs - @MisterChocker - (Leon)
  6. [PFD] Fixed V1 not disappear after liftoff - @MisterChocker - (Leon)
  7. [CDU] Added Performance Page CI functionality - @MisterChocker (Leon)
  8. [CDU] Added Progress Page CRZ FL functionality and logic - @MisterChocker (Leon)
  9. [CDU] Added Init B page only available until engine start - @MisterChocker (Leon)
  10. [CDU] Added mcdu page id system - @MisterChocker (Leon)
  11. [CDU] Added Progress Page REC MAX FL functionality and dummy OPT - @MisterChocker (Leon)
  12. [PFD] Added proper altitude constrain visuals - @MisterChocker (Leon)
  13. [COLORS] Improved MCDU/PFD/ND/ECAM colors - @MisterChocker (Leon)
  14. [PFD] General improvements to the display layout - @MisterChocker (Leon)
  15. [PFD] Added proper selected and managed speed indication - @MisterChocker (Leon)
  16. [PFD] Added V1 indication - @MisterChocker (Leon)
  17. [PFD] Added proper speed bug behaviour when outside range (approach phase) - @MisterChocker (Leon)
  18. [ECAM] Fixed thrust rating mode START in flight misbehavior - @MisterChocker (Leon)
  19. [CDU] Fixed wrong VLS calculation - @MisterChocker (Leon)
  20. [PFD] Fixed wrong managed speed calculation on approach - @MisterChocker (Leon)
  21. [ECAM] Applied FADEC power logic to thrust rating mode and value - @MisterChocker (Leon)
  22. [ECAM] Implemented thrust rating mode indication and logic - @MisterChocker (Leon)
  23. [CDU] Added actual VLS and VApp calculation - @MisterChocker (Leon)
  24. [PFD] Added actual F and S speed calculation for approach - @MisterChocker (Leon)
  25. [ENGINE] Improved engine performance - @MisterChocker (Leon)
  26. [AERODYNAMICS] Improved overall flight performance - @MisterChocker (Leon)
  27. [MISC] Redesigned Standby instrument, fixed pitch indication - @jakluk (Jakluk)
  28. [ECAM] Fixed LDG/TO memo showing at incorrect times - @MMontalto (PiCcy)
  29. [MISC] Fixed DECEL always show up on left button only - @jokey2k (JoKeY | Markus#0001 on discord)
  30. [ECAM] Engine bleed valve closes at N2 > 50% - @RichardPilbery (Richard Pilbery)
  31. [MODEL] Spinner spiral now shows at medium blur - @lukecologne (luke)
  32. [MFD] Weather Radar now sweeps at 180 degrees, Correct masking for flight path/constr/waypoints and display elements, disabled WX/TERR ON MD in PLAN - @2hwk (2Cas#1022)
  33. [ECAM] Added ECAM ALL button functionality - @MikeKuijper (Mike Kuijper)
  34. [ECAM] Fix thrust lever position indicator on upper ECAM - @RichardPilbery (Richard Pilbery | tricky_dicky3571 on discord)
  35. [ECAM] Adjusted Engine gauges so cursor extends beyond radius of gauge - @RichardPilbery (Richard Pilbery | tricky_dicky#3571 on discord)
  36. [ECAM] Fix ECAM N1 engine indicator - @RichardPilbery (Richard Pilbery | tricky_dicky#3571 on discord)
  37. [LIGHTS] Added logo lights only turn on while on ground or flaps are extented - @linkeleven (linkeleven#2557)
  38. [CDU] Add basic airways support based on code from WorkingTitle team - @santii90 (Santiago Vazquez), @Lessar277 (Lessar27)
  39. [TEXTURES] Changed cockpit decals resolution from 1k to 2k - @FoxinTale (Aubrey)
  40. [ECAM] Fix fuel used values on CRUISE and FUEL pages - @Lessar277 (Lessar27#1112)
  41. [MISC] Add localisation files for aircraft info when using other languages than english - @pessip (Pessi Päivärinne)
  42. [ATC] Fix CLR input for squawk code - @paul92ilm (Lussion)
  43. [TEXTURES] Fixed aft overhead circuit breaker decal from 'LIGHTNING' to 'LIGHTING' (@DarkOfNova#0001)
  44. [CAMERA] Modified a couple of the default interior camera angles. - @ZigTag (Falcon#5815), @linkeleven (linkeleven#2557)
  45. [CDU] Fix takeoff vspeed - @linkeleven (linkeleven#2557)
  46. [ECAM] Decimal font size change - @RichardPilbery (Richard Pilbery)
  47. [CDU] Add correct UI behavior and colors for airways page - @santii90 (Santiago Vazquez)
  48. [CDU] Add ability to clear MDA/DH, add input logic for both MDA/DH - @paul92ilm (Lussion)
  49. [CHECKLISTS] Fix FD check in Taxi checklist - @Acrobot (Andrzej Pomirski)
  50. [ADIRS] Fix ADIRS lights and split into three separate units - @devsnek (devsnek#1)
  51. [ECAM] Fixed donut and AVAIL message on N1 display. Add highlight on N2 during engine start - @RichardPilbery (Richard Pilbery)
  52. [CDU] Fix MCDU not loading when starting midair - @ThatRedMelon (Daniel Brown)
  53. [FCU] Clamp the selected altitude between 100 and 49000 - @lars-reimann (Lars Reimann)
  54. [TEXTURES] added Registry plaque and improved Textures - @Pleasure0102 (Pleasure)
  55. [GPWS] Add minimums and 100above logic - @linkeleven (linkeleven#2557)
  56. [CDU] Flight plan waypoints distances and times are now properly displayed and updated - @lousybyte (lousybyte)
  57. [CDU] Improved DECEL waypoint data and position - @lousybyte (lousybyte)
  58. [TEXTURES] Changed cockpit font and fixed spelling errors - @FoxinTale (Aubrey)
  59. [AUTO BRK] Fixed autobrake disarm behavior to match real life. MAX can no longer be selected when the aircraft is in the air. @geoffda (Geoff Darst)
  60. [FCU] Remember selected pressure mode when returning from Std mode - @lhoenig (Lukas Hoenig)
  61. [TEXTURES] upgraded to 4k Textures (pedestal,throttle unit) fixed decal texture - @Pleasure0102 (Pleasure)
  62. [PFD] Added FMAs ALT CST and ALT CST* as well as CLB magenta and DES or CLB blue - @MisterChocker (Leon)
  63. [CDU] Added CFDS display test, ATSU METAR/TAF/ATIS requests, and ATSU free text - @wpine215 (Iceman), @nistei (Nistei), @Edwin B
  64. [CDU] Fixed error messages delete input - @MisterChocker (Leon)
  65. [CDU] Added input delay paging left/right and input 1-6L/1-6R - @MisterChocker (Leon)
  66. [GPWS] Completely redone GPWS logic, and improve Retard call logic, prevent multiple calls playing at once - lukecologne (luke)
  67. [ECAM] Improve flaps/slats panel design on upper ECAM, improve flaps/slats transition logic - @paul92ilm (Lussion)
  68. [CDU] Allow inserting landing QNH in inHg - @pessip (Pessi Päivärinne)
  69. [Systems] GO-AROUND flight phase introduced
  70. [FMA] Improved and corrected FMA logic for autopilot connect/disconnect toggle during APPR mode, GO-AROUNDs, DH/MDA and other small tweaks - @antikythera288 (mrmercury#8898 on discord)
  71. [FCU] Correct behaviour of APPR and LOC buttons when connecting/disconnecting AP - @antikythera288 (mrmercury#8898 on discord)
  72. [AUTOPILOT] fully managed GO-AROUND implemented aswell as correct FD's for hand-flying the GO-AROUND (until missed approach paths are implemented, only via preselected HDG) - @antikythera288 (mrmercury#8898 on discord)
  73. [MCDU] added fully working GO-AROUND Page - @antikythera288 (mrmercury#8898 on discord)
  74. [CDU] Fix IRS coordinates always showing N/E - @beheh (Benedict Etzel)
  75. [General] Added location reporting for the live map - @nistei (Nistei)
  76. [CDU] Init A now showing computed values and simulated computational delays - @lucky38i (Lucky38i)
  77. [CDU] Fuel Pred now showing computed values and refreshes when page is updating - @lucky38i (Lucky38i)
  78. [CDU] Add V1/VR/V2 logic and disagree message, fixed V1/VR/V2 minimum range - @paul92ilm (Lussion)
  79. [ECAM] Add T.O message category to upper ECAM - @paul92ilm (Lussion)
  80. [ECAM] Fix cabin vertical speed display to show feet/min - @MattPaxtonBel, @RichardPilbery
  81. [FCU] Fix altitude change when the increment is 1000 - @lars-reimann (Lars Reimann)
  82. [CDU] Improve LAT REV page layout - @beheh (Benedict Etzel)
  83. [PFD] Improved PFD text readability - @MisterChocker (Leon)
  84. [ECAM] Added CABIN PRESS page - @nikotina91
  85. [ECAM] Add ELEC page - @ramon54321
  86. [ND] Improved flight path shape display - @lousybyte (lousybyte)
  87. [CDU] Rework duplicate waypoint names page - @pessip (Pessi Päivärinne)
  88. [ECAM] Fixed ELEV limits display on the F/CTL page - @lousybyte (lousybyte)
  89. [CDU] Fix missing preflight flight phase - @beheh (Benedict Etzel)
  90. [CDU] Fix flight phase when spawning mid-air - @beheh (Benedict Etzel)
  91. [CDU] Fixed autothrust targeting F or S speed on climb - @MisterChocker (Leon)
  92. [ND] Added altitude constraints in flight level based on the transition altitude provided in MCDU Take Off Performace @ilyeshammadi (Ilyes Hammadi)
  93. [CDU] Added TYPE I and TYPE II message types and handling - @MisterChocker (Leon)
  94. [ECAM] Fix cabin vertical speed unit - @MrMinimal (Tom Langwaldt)
  95. [CDU] Improved constraints recognition - @MisterChocker (Leon)
  96. [PFD] Add altitude indicator alerts @ilyeshammadi (Ilyes Hammadi)
  97. [CDU] The precomputed values for ZFW/ZFWCG are now properly updated when the weight load parameters are changed - @lousybyte (lousybyte)
  98. [PFD] Improved speedband visuals - @MisterChocker (Leon)
  99. [ND] Add altitue constraint symbol and fix constraint circle color @ilyeshammadi (Ilyes Hammadi)
  100. [ECAM] Add COND page - @lcalaresu (Luc Calaresu), @highperformancedevelopments
  101. [CDU] Added check for dest data is set - @MisterChocker (Leon)
  102. [CDU] Ported system messages type II to actual type II - @MisterChocker (Leon)
  103. [ECAM] Implemented proper FWC flight phases - @beheh (Benedict Etzel)
  104. [ECAM] Updated ECAM messages - @beheh (Benedict Etzel)
  105. [CDU] New improved RADNAV page | Ability to tune navaids with identifier - @St54Kevin (Kevin Karas)
  106. [CDU] Corrected visuals for constraints on flight plan page - @MisterChocker (Leon)
  107. [ND] Add heading line to ARC and NAV map mode @ilyeshammadi (Ilyes Hammadi)
  108. [PFD] Add QNH flashing when reach transition altitude - @Kimbyeoungjang (김병장#7165)
  109. [ECAM] Added flight phase inhibit override to recall button - @beheh (Benedict Etzel)
  110. [CDU] Changed FMGC constraint classification - @MisterChocker (Leon)
  111. [CDU] Added constraints symbols logic to flight plan - @ilyeshammadi (Ilyes Hammadi)
  112. [ECAM] Changed SAT and TAT values to green colour - @RichardPilbery (Richard Pilbery)
  113. [General] Improve ground handling, steering, and suspension - @wpine215 (Iceman)
  114. [CDU] Added Airway Page airway to airway insert option - @MisterChocker (Leon)
  115. [Sound] Improved PTU, flaps, and fuel pump sounds which are no longer heard in cockpit - @hotshotp (Boris)
  116. [Sound] Improved and added new ground roll and touchdown sounds - @hotshotp (Boris)
  117. [Sound] Improved ambient avionics fan sound, and added cabin fan sound - @hotshotp (Boris)
  118. [Sound] Improved gear lever click sound - @hotshotp (Boris)
  119. [Sound] Improved nose wheel liftoff sound - @hotshotp (Boris)
  120. [Sound] Added new APU start contactor sounds - @hotshotp (Boris)
  121. [Sound] Added new realistic LEAP-1A engine sounds - @hotshotp (Boris)
  122. [Lights] Added Flood Lights - @Snapmatics (Harry)
  123. [Lights] Added Reading Lights - @Snapmatics (Harry)
  124. [Lights] Improved Screen Backlight - @Snapmatics (Harry)
  125. [Lights] Improved Exterior Lights - @Snapmatics (Harry)
  126. [Lights] Improved Interior Lights - @Snapmatics (Harry)
  127. [CDU] Improved input handling while a message is visible - @MisterChocker (Leon)
  128. [ND] Fix weather radar not showing after switching to plan view - @ilyeshammadi (Ilyes Hammadi)
  129. [Autopilot] Increase max bank angle from 20 to 25 - @wpine215 (Iceman)
  130. [PFD] Fix ALT magenta in OP DES/CLB - @MisterChocker (Leon)
  131. [ECAM] Add G LOAD indication to lower ECAM - @beheh (Benedict Etzel)
  132. [PFD] Added vR indication - @MisterChocker (Leon)
  133. [MFD] Corrected icon for the Decel point on flightplan - @LoungeFlyZ (Chris Johnson)
  134. [ND] Update ND to only show Mode Changed when mode button is used - @ilyeshammadi (Ilyes Hammadi)
  135. [TCAS] Implement first iteration of TCAS - @lukecologne (luke)
  136. [CDU] Arrival and departure page fixes and updated Honeywell-style design - @saintwolf (John Good)
  137. [ECAM] Temporary fix small word on lower ecam, status page - @Kimbyeongjang (김병장#7165)
  138. [ECAM] Add icing-related ECAM warnings and memos - @beheh (Benedict Etzel)
  139. [CDU] Fix CLR position in scratchpad - @beheh (Benedict Etzel)
  140. [General] Added INIT BARO option, INHG/HPA/AUTO - @theomessin (Theodore Messinezis)
  141. [CDU] Improved key input delays - @MisterChocker (Leon)
  142. [PFD] Changed S and F speeds data source - @MisterChocker (Leon)
  143. [ANIMATIONS] Desynced the wiper animations - @pepperoni505 (pepperoni505), @lukecologne (luke)
  144. [CDU] Added calculation for ground speed mini - @MisterChocker (Leon)
  145. [FLIGHTMODEL] Changed rudder and vertical tail parameters for improved crosswind takeoff and landing capability - @donstim - (donbikes#4084)
  146. [FLIGHTMODEL] Changed full landing flap deflection from 35 degrees to 40 degrees - @donstim - (donbikes#4084)
  147. [FLIGHTMODEL] Updated legacy flight model parameters for consistency with modern flight model - @donstim - (donbikes#4084)
  148. [ECAM] Adjusted flaps panel - @MisterChocker (Leon)
  149. [CDU] F-PLN page visual rework - @Lollo999 (Lorenzo Pinna)
  150. [Sound] Improved ground roll - @hotshotp (Boris)
  151. [Sound] Added new heavy turbulence sounds different in cabin and cockpit - @hotshotp (Boris)
  152. [CDU] Added ground speed mini - @MisterChocker (Leon)
  153. [MISC] Fix pedestal camera position triggering radio frequency display glitch - @pareil6 (pareil6)
  154. [FLIGHTMODEL] Corrected fuel tank capacities, including unusable fuel - @donstim - (donbikes#4084)
  155. [General] Added option to switch between KG and LBS - @MisterChocker (Leon)
  156. [CDU] Improved INIT-A PAGE transition to INIT-B or FUEL PRED PAGE - @MisterChocker (Leon)
  157. [CDU] Improved Options Page - @MisterChocker (Leon)
  158. [Sound] Replaced sounds for various switches, levers, and buttons - @hotshotp (Boris)
  159. [CDU] Added Soft GA Logic - @MisterChocker (Leon)
  160. [ECAM] Improved Thrust Rating update condition - @MisterChocker (Leon)
  161. [CDU] Fix SIDs scrolling on departures page - @SergeySoprykin (SergeyS)

0.4.0

  1. [General] Add CHANGELOG.md - @nathaninnes (Nathan Innes)
  2. [ECAM] Improved Upper ECAM Visuals - @wpine215 (Iceman)
  3. [TEXTURES] Changed roughness of glareshield - @Pleasure (Pleasure)
  4. [CDU] Fixed several issues related to incorrect active waypoints - @lousybyte (lousybyte)
  5. [CDU] Fixed a crash when trying to replace a waypoint in the flight plan - @lousybyte (lousybyte)
  6. [EXTERIOR] Fixed issue in engine rotation animation that made it rotate too quickly - @lukecologne (lukecologne)
  7. [PFD] Remove code related to unrelevant aircraft - @1Revenger1 (Avery Black)
  8. [ECAM] Lower ECAM DOOR Page Colour Fix - @nathaninnes (Nathan Innes)
  9. [ND] Add DME distances, VOR/ADF needles and functioning ADF2 - @blitzcaster (bltzcstr)
  10. [OVHD] Fixed Battery Indicator Colour - @nathaninnes (Nathan Innes)
  11. [MISC] Removed Fuel Patch from MSFS Update 1.8.3 - @nathaninnes (Nathan Innes)
  12. [ND] Change ND Sizing - @nathaninnes (Nathan Innes)
  13. [GPWS] Added Pull Up, Sink Rate, Dont sink GPWS with Default Sounds & Added (Too low) terrain, flaps and gear without Sounds (Future PR by Boris) - @oliverpope03 (Oliver Pope)
  14. [Sounds] Added new sounds for fuel pumps, flaps, ground roll and rattles, touchdowns, and wind - @hotshotp (Boris)
  15. [ND] Hide the aircraft indicator in PLAN mode while ADIRS are not aligned - @lousybyte (lousybyte)
  16. [LIGHTS] Improved Strobe, Nav and beacon lights - @lukecologne (lukecologne)
  17. [Sounds] Added new startup sounds - @hotshotp (Boris)
  18. [ECAM] ELAC/SEC warning color fix, added spoiler functionality to ECAM page - @wpine215 (Iceman)
  19. [OVHD] Implemented missing functionality for multiple overhead buttons and switches - @wpine215 (Iceman)
  20. [ECAM] Improved APU ECAM visuals - @wpine215 (Iceman)
  21. [TEXTURES] Changed texture of glareshield and added details - @Pleasure0102 (Pleasure)
  22. [ECAM] Improved Fuel ECAM visuals and corrected center pump inconsistency - @wpine215 (Iceman)
  23. [MISC] Separated Captian and F/O displays - @tyler58546 (tyler58546)
  24. [ECAM] Added engine FADEC power supply logic - @tyler58546 (tyler58546)
  25. [ECAM] Improved lower engine ECAM - @lousybyte (lousybyte)
  26. [CDU] Add "Closest Airports" page - @lhoenig (Lukas Hoenig)
  27. [PFD] Fixed FD bars appearing on PFD when on the ground - @Curtis-VL (Curtis)
  28. [CDU] Added IRS Init page - @externoak (Externo)
  29. [OVHD] Implement additional overhead button/switch functionality (EMER ELEC, EVAC, air data switching, etc.) - @wpine215 (Iceman)
  30. [ECAM] Made open doors on DOOR/OXY page amber instead of green - @Benjozork (Benjamin Dupont)
  31. [PFD] Adjust vertical Flight Director offset - @veikkos (Veikko Soininen)
  32. [PFD] Fix Radio altimeter only updating every second - @lukecologne (luke)
  33. [Systems] Pitot heating should now be active while engines are running - @lousybyte (lousybyte)
  34. [TEXTURES] Higher resoloution Mainpanel, fixed glareshield texture error - @Pleasure0102 (Pleasure)
  35. [ECAM] Overhauled WHEEL Page - @Benjozork (Benjamin Dupont)
  36. [CDU] Add approach waypoints to DCT page - @lengyc0208 (lyc)
  37. [Sounds] Added 3D emitters for all sounds - @hotshotp (Boris)
  38. [Sounds] Added sounds for Evac horn, emer cabin call, mech horn, gear extend/retract, and cargo door - @hotshotp (Boris)
  39. [CDU] Revised blue, green and amber colors on CDU - @lucky38i (Lucky38i)
  40. [CDU] Revised INIT A & B Page - @lucky38i (Lucky38i)
  41. [CDU] Fixed certain STARs not showing on arrivals page - @tyler58546 (tyler58546)
  42. [CHECKLISTS] Added several situations from QRH to checklists - @FBI#7771
  43. [ECAM] Fix ECAM wheel page being selected before all gears are downlocked - @lukecologne (luke)
  44. [MISC] Added standby instrument brightness adjustment and attitude reset - @2hwk (2Cas#1022 on discord)
  45. [MISC] Added standby instrument bugs page and corrected standby instrument font and behaviour on power loss - @2hwk (2Cas#1022 on discord)
  46. [PFD] Added the ability to display metric altitudes - @lousybyte (lousybyte)
  47. [ECAM] Added messages related to anti-skid / N.W. steering being off - @Benjozork (Benjamin Dupont)
  48. [CDU] Updated HOLD Page to honeywell spec, PLAN page updated to show holds - @sepiroth887 (sepiroth887)
  49. [FCU] Fixed incrementing the QNH while in hPa mode - @lousybyte (lousybyte)
  50. [CDU] Follow Green Dot speed on approach with flaps clean - @veikkos (Veikko Soininen)
  51. [ND] Fixed cyan heading bug not showing on ND in VOR and LS modes - @AdenFlorian (David Valachovic)
  52. [CDU] Improved the VERT REV page - @lousybyte (lousybyte)
  53. [PFD] Correct PFD attitude indicator onground/inflight - @MMontalto (PiCcy)
  54. [ND] Added WX/TERR on ND brightness knob, fix ND/PFD brightness tooltips - @lukecologne (luke)
  55. [ECAM] Improved ECAM bleed page visuals and functionality - @nikotina91
  56. [LIGHTS] Fixed DIM/BRT Lights inside the cockpit. Overhead should now be visible. - @Snapmatics (Harry)
  57. [OVHD] Made AIR COND knobs continuous - @Benjozork (Benjamin Dupont)
  58. [DCDU] Add basic functionality and display - @Benjozork (Benjamin Dupont)
  59. [TEXTURES] Changed color of FD Panel.
  60. [MISC] New custom display font for PFD/ND/ECAM/MCDU. Overhauled formatting, CSS, and colors of ECAM pages - @wpine215 (Iceman)
  61. [TEXTURES] Fixed Speed Plaque and cleaned up texture on cockpit, some color corrections and more decals - @Pleasure0102 (Pleasure)
  62. [TEXTURES] Changed Overhead Panel Texture (Decals, color, detail) - @Pleasure0102 (Pleasure)
  63. [LIVERY] Bundle the FlyByWire Livery with the A32NX addon - @devsnek (devsnek)
  64. [ECAM] Added cockpit door video - @Benjozork (Benjamin Dupont)
  65. [MISC] Standby Instrument stays ON if emergency power should be available, bug fixes - @2hwk (2Cas#1022 on discord)
  66. [CDU] Full +/- button functionality - @lhoenig (Lukas Hoenig)
  67. [DCDU] Fixed MSG- and MSG+ button labels - @tyler58546 (tyler58546)