CleanroomLogger

CleanroomLogger provides an extensible Swift-based logging API that is simple, lightweight and performant.

The API provided by CleanroomLogger is designed to be readily understood by anyone familiar with packages such as CocoaLumberjack and log4j.

CleanroomLogger is part of the Cleanroom Project from Gilt Tech.

Swift compatibility

This is the master branch. It uses Swift 3.0 and requires Xcode 8 to compile.

Current status

Branch	Build status
`master`

Why CleanroomLogger?

If you’re familiar with NSLog(), then you’ll understand the purpose of CleanroomLogger.

As with NSLog(), CleanroomLogger messages are (by default) directed to the Apple System Log and to the stderr output stream of the running process.

However, CleanroomLogger adds a number of important features not provided by NSLog():

Each log message is associated with a LogSeverity value indicating the importance of that message. This enables you to very easily do things like squelch out low-priority messages—such as those logged with .Debug and .Verbose severity values—in production binaries, thereby lessening the amount of work your App Store build does at runtime.
CleanroomLogger makes it easy to find the where your code is issuing log messages. With NSLog() and print(), it can sometimes be difficult to figure out what code is responsible for generating log messages. When a message is constructed programmatically, for example, it may not be possible to find its source. CleanroomLogger outputs the file and line responsible for each log message, so you can literally go straight to the source.
CleanroomLogger provides code execution tracing functionality through the trace() function. A simple no-argument function call is all that’s needed to log the source filename, line number and function name of the caller. This makes it easy to understand the path your code is taking as it executes.
CleanroomLogger is configurable; its behavior can be modified by through different configuration options specified when logging is activated. You can configure the logging engine through the parameter values specified when constructing a new DefaultLogConfiguration instance, or you can provide your own implementation of the LogConfiguration protocol if that doesn’t suit your needs.
CleanroomLogger is extensible. Several extension points are available, allowing you to provide custom implementations for specific functionality within the logging process:

A LogFilter implementation can inspect--and potentially block--any log message before it is recorded.
A custom LogFormatter implementation can be used to generate string representations in a specific format for each LogEntry that gets recorded
The LogRecorder protocol makes it possible to create custom log message storage implementations. This is where to start if you want to provide a custom solution to write log messages to a database table, a local file, or a remote HTTP endpoint, for example.

CleanroomLogger puts the application developer in control. The behavior of logging is set once, early in the application within the UIApplicationDelegate implementation; after that, the configuration is immutable for the remainder of the application’s life. Any code using CleanroomLogger through the Log API, including embedded frameworks, shared libraries, Cocoapods, etc. will automatically adhere to the policy established by the application developer. Embedded code that uses CleanroomLogger is inherently well behaved, whereas code using plain old NSLog() is not; third-party code using NSLog() give no control to the application developer.
CleanroomLogger is respectful of the calling thread. NSLog() does a lot of work on the calling thread, and when used from the main thread, it can lead to lower display frame rates. When CleanroomLogger accepts a log request, it is immediately handed off to an asynchronous background queue for further dispatching, letting the calling thread get back to work as quickly as possible. Each LogRecorder also maintains its own asynchronous background queue, which is used to format log messages and write them to the underlying storage facility. This design ensures that if one recorder gets bogged down, it won’t prevent the processing of log messages by other recorders.
CleanroomLogger uses Swift short-circuiting to avoid needless code execution. For example, in production code with .Info as the minimum LogSeverity, messages with a severity of .Verbose or .Debug will always be ignored. To avoid unneeded code execution, Log.debug and Log.verbose in this case would be nil, allowing efficient short-circuiting of any code attempting to use these inactive log channels.

License

CleanroomLogger is distributed under the MIT license.

CleanroomLogger is provided for your use—free-of-charge—on an as-is basis. We make no guarantees, promises or apologies. Caveat developer.

Adding CleanroomLogger to your project

The simplest way to integrate CleanroomLogger is with the Carthage dependency manager.

First, add this line to your Cartfile:

github "emaloney/CleanroomLogger" ~> 3.0.0

Then, use the carthage command to update your dependencies.

Finally, you’ll need to integrate CleanroomLogger into your project in order to use the API it provides.

Once successfully integrated, just add the following import statement to any Swift file where you want to use CleanroomLogger:

import CleanroomLogger

See the Integration document for additional details on integrating CleanroomLogger into your project.

Using CleanroomLogger

The main public API for CleanroomLogger is provided by Log.

Log maintains five static read-only LogChannel properties that correspond to one of five severity levels indicating the importance of messages sent through that channel. When sending a message, you would select a severity appropriate for that message, and use the corresponding channel:

Log.error — The highest severity; something has gone wrong and a fatal error may be imminent
Log.warning — Something appears amiss and might bear looking into before a larger problem arises
Log.info — Something notable happened, but it isn’t anything to worry about
Log.debug — Used for debugging and diagnostic information (not intended for use in production code)
Log.verbose - The lowest severity; used for detailed or frequently occurring debugging and diagnostic information (not intended for use in production code)

Each of these LogChannels provide three functions to record log messages:

trace() — This function records a log message with program executing trace information including the filename, line number and name of the calling function.
message(String) — This function records the log message passed to it.
value(Any?) — This function attempts to record a log message containing a string representation of the optional Any value passed to it.

Enabling logging

By default, logging is disabled, meaning that none of the Log’s channels have been populated. As a result, they have nil values and any attempts to perform logging will silently fail.

It is the responsibility of the application developer to enable logging, which is done by calling the appropriate variant of the Log.enable() function.

The reason we specifically say that the application developer is responsible for enabling logging is to give the developer the power to control the use of logging process-wide. As with any code that executes, there’s an expense to logging, and the application developer should get to decide how to handle the tradeoff between the utility of collecting logs and the expense of collecting them at a given level of detail.

CleanroomLogger is built to be used from within frameworks, shared libraries, etc., as well as at the application level. However, any code designed to be embedded in other applications must interact with CleanroomLogger via the Log API only.

We believe so strongly that the application developer should be in full control of logging policy application-wide, that we even provide a way to ensure that CleanroomLogger is never enabled. That way, if you need to include a third-party library that uses CleanroomLogger, you can decide to turn it off entirely, thereby ensuring that you pay no performance penalty for logging. Just call Log.neverEnable().

Ideally, logging is enabled at the first possible point in the application’s launch cycle. Otherwise, critical log messages may be missed during launch because the logger wasn’t yet initialized.

The best place to put the call to Log.enable() is at the first line of your app delegate’s init().

If you’d rather not do that for some reason, the next best place to put it is in the application(_:willFinishLaunchingWithOptions:) function of your app delegate. You’ll notice that we’re specifically recommending the will function, not the typical did, because the former is called earlier in the application’s launch cycle.

Note: During the running lifetime of an application process, only the first call to Log.enable() function will have any effect. All subsequent calls are ignored silently.

Logging examples

To record items in the log, simply select the appropriate channel and call the appropriate function.

Here are a few examples:

Logging an arbitrary text message

Let’s say your application just finished launching. This is a significant event, but it isn’t an error. You also might want to see this information in production app logs. Therefore, you decide the appropriate LogSeverity is .Info and you select the corresponding LogChannel, which is Log.info. Then, to log a message, just call the channel’s message() function:

Log.info?.message("The application has finished launching.")

Logging a trace message

If you’re working on some code and you’re curious about the order of execution, you can sprinkle some trace() calls around.

This function outputs the filename, line number and name of the calling function.

For example, if you put the following code on line 364 of a file called ModularTable.swift in a function with the signature tableView(_:cellForRowAtIndexPath:):

Log.debug?.trace()

The following message would be logged when that line gets executed:

ModularTable.swift:364 — tableView(_:cellForRowAtIndexPath:)

Note: Because trace information is typically not desired in production code, you would generally only perform tracing at the .Debug or .Verbose severity levels.

Logging an arbitrary value

The value() function can be used for outputting information about a specific value. The function takes an argument of type Any? and is intended to accept any valid runtime value.

For example, you might want to output the NSIndexPath value passed to your UITableViewDataSource’s tableView(_: cellForRowAtIndexPath:) function:

Log.verbose?.value(indexPath)

This would result in output looking like:

<NSIndexPath: 0xc0000000000180d6> {length = 2, path = 3 - 3}

Note: Although every attempt is made to create a string representation of the value passed to the function, there is no guarantee that a given log implementation will support values of a given type.

CleanroomLogger In Depth

This section delves into the particulars of configuring and customizing CleanroomLogger to suit your needs.

Configuring CleanroomLogger

CleanroomLogger is configured when one of the Log.enable() function variants is called. Configuration can occur at most once within the lifetime of the running process. And once set, the configuration can’t be changed; it’s immutable. (The rationale for this is discussed here.)

The LogConfiguration protocol represents the mechanism by which CleanroomLogger can be configured. LogConfigurations allow encapsulating related settings and behavior within a single entity, and CleanroomLogger can be configured with multiple LogConfiguration instances to allow combining behaviors.

Each LogConfiguration specifies:

The minimumSeverity, a LogSeverity value that determines which log entries get recorded. Any LogEntry with a severity less than the configuration's mimimumSeverity will not be passed along to any LogRecorders specified by that configuration.
An array of LogFilters. Each LogFilter is given a chance to cause a given log entry to be ignored.
A synchronousMode property, which determines whether synchronous logging should be used when processing log entries for the given configuration. This feature is intended to be used during debugging and is not recommended for production code.
Zero or more contained LogConfigurations. For organizational purposes, each LogConfiguration can in turn contain additional LogConfigurations. The hierarchy is not meaningful, however, and is flattened at configuration time.
An array of LogRecorders that will be used to write log entries to the underlying logging facility. If a configuration has no LogRecorders, it is assumed to be a container of other LogConfigurations only, and is ignored when the configuration hierarchy is flattened.

When CleanroomLogger receives a request to log something, zero or more LogConfigurations are selected to handle the request:

The severity of the incoming LogEntry is compared against the minimumSeverity of each LogConfiguration. Any LogConfiguration whose minimumSeverity is equal to or less than the severity of the LogEntry is selected for further consideration.
The LogEntry is then passed sequentially to the shouldRecordLogEntry(_:) function of each of the LogConfiguration’s filters. If any LogFilter returns false, the associated configuration will not be selected to record that log entry.

XcodeLogConfiguration

The XcodeLogConfiguration is ideally suited for use during development and in production.

By default, this configuration writes log entries to the running process’s stdout stream (which appears within the Xcode console pane) as well as to the Apple System Log (ASL) facility.

The XcodeLogConfiguration also attempts to detect whether XcodeColors is installed and enabled. If it is, the XcodeLogConfiguration will configure CleanroomLogger to use XcodeColors for color-coding log entries by severity.

The simplest way to enable CleanroomLogger using the XcodeLogConfiguration is by calling:

Log.enable()

Thanks to the magic of default parameter values, this is equivalent to the following Log.enable() call:

Log.enable(minimumSeverity: .Info,
                 debugMode: false,
          verboseDebugMode: false,
            timestampStyle: .Default,
             severityStyle: .Xcode,
              showCallSite: true,
         showCallingThread: false,
            suppressColors: false,
                   filters: [])

This configures CleanroomLogger using an XcodeLogConfiguration with default settings.

Note: If either debugMode or verboseDebugMode is true, the XcodeLogConfiguration will be used in synchronousMode, which is not recommended for production code.

The call above is also equivalent to:

Log.enable(configuration: XcodeLogConfiguration())

RotatingLogFileConfiguration

The RotatingLogFileConfiguration can be used to maintain a directory of log files that are rotated daily.

Warning: The RotatingLogFileRecorder created by the RotatingLogFileConfiguration assumes full control over the log directory. Any file not recognized as an active log file will be deleted during the automatic pruning process, which may occur at any time. This means if you’re not careful about the directoryPath you pass, you may lose valuable data!

At a minimum, the RotatingLogFileConfiguration requires you to specify the minimumSeverity for logging, the number of days to keep log files, and a directory in which to store those files:

// logDir is a String holding the filesystem path to the log directory
let rotatingConf = RotatingLogFileConfiguration(minimumSeverity: .Info,
                                                     daysToKeep: 7,
                                                  directoryPath: logDir)

Log.enable(configuration: rotatingConf)

The code above would record any log entry with a severity of .Info or higher in a file that would be kept for at least 7 days before being pruned. This particular configuration uses the ReadableLogFormatter to format log entries.

The RotatingLogFileConfiguration can also be used to specify synchronousMode, a set of LogFilters to apply, and one or more custom LogFormatters.

Combining Configurations

CleanroomLogger also supports passing multiple configurations. This allows you to combine the behavior of different configurations.

For example, to add a debug mode XcodeLogConfiguration to the rotatingConf declared above, you could write:

Log.enable(configuration: [XcodeLogConfiguration(debugMode: true), rotatingConf])

In this example, both the XcodeLogConfiguration and the RotatingLogFileConfiguration will be consulted as logging occurs. Because the XcodeLogConfiguration is declared with debugMode: true, it will operate in synchronousMode while rotatingConf will operate asynchronously.

Implementing Your Own Configuration

Although you can provide your own implementation of the LogConfiguration protocol, it may be simpler to create a BasicLogConfiguration instance and pass the relevant parameters to the initializer.

You can also subclass BasicLogConfiguration if you’d like to encapsulate your configuration further.

A Complicated Example

Let’s say you want CleanroomLogger to write to stdout, the Apple System Log (ASL) facility, and a set of rotating log files, and you want the log entries for each to be formatted differently:

An XcodeLogFormatter for stdout but not the ASL
A ReadableLogFormatter for the ASL
A ParsableLogFormatter for writing to the rotating log files

To configure CleanroomLogger in this fashion, you could write:

// create 3 different types of formatters
let xcodeFormat = XcodeLogFormatter()
let aslFormat = ReadableLogFormatter()
let fileFormat = ParsableLogFormatter()

// create a configuration for logging to the Xcode console, but
// disable ASL logging so we can use a different formatter for it
let xcodeConfig = XcodeLogConfiguration(logToASL: false,
									   formatter: xcodeFormat)

// create a configuration containing an ASL log recorder
// using the aslFormat formatter. turn off stderr echoing
// so we don’t see duplicate messages in the Xcode console
let aslRecorder = ASLLogRecorder(formatter: aslFormat,
							  echoToStdErr: false)
let aslConfig = BasicLogConfiguration(recorders: [aslRecorder])

// create a configuration for a rotating log file directory
// that uses the fileFormat formatter -- logDir is a String
// holding the filesystem path to the log directory
let fileCfg = RotatingLogFileConfiguration(minimumSeverity: .Info,
												daysToKeep: 15,
											 directoryPath: logDir,
												formatters: [fileFormat])

// crash if the log directory doesn’t exist yet & can’t be created
try! fileCfg.createLogDirectory()

// enable logging using the 3 different LogRecorders
// that each use their own distinct LogFormatter
Log.enable(configuration: [xcodeConfig, aslConfig, fileCfg])

Customized Log Formatting

The LogFormatter protocol is consulted when attempting to convert a LogEntry into a string.

CleanroomLogger ships with several high-level LogFormatter implementations for specific purposes:

XcodeLogFormatter — Used by the XcodeLogConfiguration by default.
ParsableLogFormatter — Ideal for logs intended to be ingested for parsing by other processes.
ReadableLogFormatter — Ideal for logs intended to be read by humans.

The LogFormatters above are all subclasses of StandardLogFormatter, which provides a basic mechanism for customizing the behavior of formatting.

You can also assemble an entirely custom formatter quite easily using the FieldBasedLogFormatter, which lets you mix and match Fields to roll your own formatter.

Let’s say you just wanted the following fields in your log output, each separated by a tab character:

UNIX timestamp
Numeric severity level
Log message

You could build such a formatter with the code:

let formatter = FieldBasedLogFormatter(fields: [.Timestamp(.UNIX),
                                                .Delimiter(.Tab),
                                                .Severity(.Numeric),
                                                .Delimiter(.Tab),
                                                .Payload])

API documentation

For detailed information on using CleanroomLogger, API documentation is available.

XcodeColors Support

CleanroomLogger contains built-in support for XcodeColors, a third-party Xcode plug-in that uses special escape sequences to colorize text output within the Xcode console.

When it is in use, XcodeColors sets the value of the environment variable XcodeColors to the string YES. And when configured with an XcodeLogConfiguration, CleanroomLogger will automatically enable log colorization if it detects XcodeColors is present. This will result in log messages being color-coded according to their LogSeverity in the Xcode console.

If you have XcodeColors installed but would not like to enable CleanroomLogger support for it, pass true for suppressColors or nil for colorizer when instantiating your XcodeLogConfiguration.

The built-in color scheme—which you can override by supplying your own ColorTable—emphasizes important information while seeking to make less important messages fade into the background when you’re not focused on them:

Enabling XcodeColors for iOS, tvOS & watchOS

When your code runs in a simulator or on an external device, it is actually running in an entirely separate operating system that does not inherit the environment variables that XcodeColors modifies when it is enabled.

XcodeColors only modifies the environment of the local Mac user running Xcode. Therefore, XcodeColors can only automatically enable support for Mac OS X code itself.

If your code is running on iOS, tvOS or watchOS, you will need to change your Xcode settings to pass the XcodeColors variable your code’s runtime environment. This can be done by editing any Build Schemes you want to use with XcodeColors.

To edit the current build scheme, press ⌘< (command-shift-comma on a US English keyboard). In the editor that appears, select Run in the left-hand pane. Then, select the Arguments option at the top.

Ensure that the Environment Variables section is expanded below, and click the + button within that section.

This will allow you to add a new environment variable within the runtime environment. Enter XcodeColors for the name and YES for the value, as shown in this example:

When done, select the Close button.

The next time you run your code, assuming both XcodeColors and CleanroomLogger are installed and configured correctly, you should see colorized log output within your Xcode console.

Troubleshooting XcodeColors

Colors are not showing up!

If the XcodeColors environment variable is set to YES but is being run in within a copy of Xcode where XcodeColors is not installed and loaded, CleanroomLogger will (incorrectly) assume that XcodeColors is installed and will dutifully output the escape sequences needed to drive message colorization.

Those escape sequences will appear in your output instead of color:

If this happens, it means the XcodeColors plug-in is either not installed, or Xcode is not loading it upon launch.

If you see no color and no escape codes, it means CleanroomLogger did not detect an XcodeColors variable set to YES in its runtime environment.

It stopped working after I updated Xcode!

If you recently updated Xcode, and a previously-working installation of XcodeColors no longer works, your XcodeColors plug-in likely needs to be updated to work with the latest version of Xcode.

See the documentation for XcodeColors for details on how to do this.

Architectural Overview

CleanroomLogger is designed to do avoid doing formatting or logging work on the calling thread, making use of Grand Central Dispatch (GCD) queues for efficient processing.

In terms of threads of execution, each request to log anything can go through three main phases of processing:

On the calling thread:
Caller attempts to issue a log request by calling a logging function (eg., message(), trace() or value()) of the appropriate LogChannel maintained by Log. - If there is no LogChannel for the given severity of the log message (because CleanroomLogger hasn’t yet been enabled() or it is not configured to log at that severity), Swift short-circuiting prevents further execution. This makes it possible to leave debug logging calls in place when shipping production code without affecting performance.
If a LogChannel does exist, it creates an immutable LogEntry struct to represent the thing being logged.
The LogEntry is then passed to the LogReceptacle associated with the LogChannel.
Based on the severity of the LogEntry, the LogReceptacle selects one or more LogConfigurations to use for recording the message. Among other things, these configurations determine whether further processing proceeds synchronously or asynchronously when passed to the underlying LogReceptacle’s GCD queue. (Synchronous processing is useful during debugging, but is not recommended for general production code.)
On the LogReceptacle queue:
The LogEntry is passed through zero or more LogFilters that are given a chance to prevent further processing of the LogEntry. If any filter indicates that LogEntry should not be recorded, processing stops.
The LogConfiguration is used to determine which LogRecorders (if any) will be used to record the LogEntry.
For each LogRecorder instance specified by the configuration, the LogEntry is then dispatched to the GCD queue provided by the LogRecorder.
On each LogRecorder queue:
The LogEntry is passed sequentially to each LogFormatter provided by the LogRecorder, giving the formatters a chance to create the formatted message for the LogEntry. - If no LogFormatter returns a string representation of LogEntry, further processing stops and nothing is recorded. - If any LogFormatter returns a non-nil value to represent the formatted message of the LogEntry, that string is then passed to the LogRecorder for final logging.

Full Disclosure: A Note about Global State

If you’ve been reading the op-ed pages lately, you know that Global State is the enemy of civilization. You may also have noticed that Log’s static variables constitute global state.

Before you pick up your phone and demand that Thought Control activates its network of Twitter shamebots because a heretic has been detected, consider:

In most cases, Log is used as an interface to two resources that are effectively singletons: the Apple System Log daemon of the device where the code will be running, and the stderr output stream of the running application. Log maintains global state because it represents global state.
The state represented by Log is effectively immutable. The public interface is read-only, and the values are guaranteed to only ever be set once: at app launch, when Log.enable() is called from within the app delegate. The design of this gives full control to the application developer over the logging performed within the application; even third-party libraries using CleanroomLogger will use the logging configuration specified by the app developer.
Log designed to be convenient to encourage the judicious use of logging. During debugging, you might want to quickly add some debug tracing to some already-existing code; you can simply add Log.debug?.trace() to the appropriate places without refactoring your codebase to pass around LogChannels or LogReceptacles everywhere. Given that every single function in your code is a candidate for logging, it’s impractical to use logging extensively without the convenience of Log.
If you have a compelling reason to avoid using Log, but you still wish to use the functionality provided by CleanroomLogger, you can always construct and manage your own LogChannels and LogReceptacles directly. The only global state within the CleanroomLogger project is contained in Log itself. Note, however, that this should only be done by the app developer; vendors of embedded code should only ever interact with CleanroomLogger through the public API provided by Log to ensure that the app developer is always in control of logging.

Although there are many good reasons why global state is to be generally avoided and otherwise looked at skeptically, in this particular case, our use of global state is deliberate, well-isolated and not required to take advantage of the core functionality provided by CleanroomLogger.

About

The Cleanroom Project began as an experiment to re-imagine Gilt’s iOS codebase in a legacy-free, Swift-based incarnation.

Since then, we’ve expanded the Cleanroom Project to include multi-platform support. Much of our codebase now supports tvOS in addition to iOS, and our lower-level code is usable on macOS and watchOS as well.

Cleanroom Project code serves as the foundation of Gilt on TV, our tvOS app featured by Apple during the launch of the new Apple TV. And as time goes on, we'll be replacing more and more of our existing Objective-C codebase with Cleanroom implementations.

In the meantime, we’ll be tracking the latest releases of Swift & Xcode, and open-sourcing major portions of our codebase along the way.

Contributing

CleanroomLogger is in active development, and we welcome your contributions.

If you’d like to contribute to this or any other Cleanroom Project repo, please read the contribution guidelines.

Acknowledgements

API documentation for CleanroomLogger is generated using Realm’s jazzy project, maintained by JP Simard and Samuel E. Giddins.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

CleanroomLogger

Swift compatibility

Current status

Why CleanroomLogger?

License

Adding CleanroomLogger to your project

Using CleanroomLogger

Enabling logging

Logging examples

Logging an arbitrary text message

Logging a trace message

Logging an arbitrary value

CleanroomLogger In Depth

Configuring CleanroomLogger

XcodeLogConfiguration

RotatingLogFileConfiguration

Combining Configurations

Implementing Your Own Configuration

A Complicated Example

Customized Log Formatting

API documentation

XcodeColors Support

Enabling XcodeColors for iOS, tvOS & watchOS

Troubleshooting XcodeColors

Colors are not showing up!

It stopped working after I updated Xcode!

Architectural Overview

Full Disclosure: A Note about Global State

About

Contributing

Acknowledgements

Files

README.md

Latest commit

History

README.md

File metadata and controls

CleanroomLogger

Swift compatibility

Current status

Why CleanroomLogger?

License

Adding CleanroomLogger to your project

Using CleanroomLogger

Enabling logging

Logging examples

Logging an arbitrary text message

Logging a trace message

Logging an arbitrary value

CleanroomLogger In Depth

Configuring CleanroomLogger

XcodeLogConfiguration

RotatingLogFileConfiguration

Combining Configurations

Implementing Your Own Configuration

A Complicated Example

Customized Log Formatting

API documentation

XcodeColors Support

Enabling XcodeColors for iOS, tvOS & watchOS

Troubleshooting XcodeColors

Colors are not showing up!

It stopped working after I updated Xcode!

Architectural Overview

Full Disclosure: A Note about Global State

About

Contributing

Acknowledgements