gsg.json

[{"description":"Centimeter precision GPS/GNSS using L1/L2/L5 signals broadcast over Bluetooth, WiFi, and Ethernet.","homepage":"http://docs.sparkfun.com/SparkFun_RTK_Everywhere_Firmware/","name":"SparkFun_RTK_Everywhere_Firmware","url":"https://github.com/sparkfun/SparkFun_RTK_Everywhere_Firmware"},{"description":"Documentation and hardware Files for the SparkFun BlueSMiRF v2. These boards work as a wireless serial UART pipe and are a great wireless replacement for serial cables. Simply pair, connect, and transmit serial data between your TX/RX lines! Any serial stream from 2400 to 921600 baud can be passed seamlessly between two devices.","homepage":"http://docs.sparkfun.com/SparkFun_BlueSMiRF-v2/","name":"SparkFun_BlueSMiRF-v2","url":"https://github.com/sparkfun/SparkFun_BlueSMiRF-v2"},{"description":"Documentation and hardware files for the low cost SparkFun GNSS L1/L5 Breakout - NEO-F10N.","homepage":"https://docs.sparkfun.com/SparkFun_u-blox_NEO-F10N","name":"SparkFun_u-blox_NEO-F10N","url":"https://github.com/sparkfun/SparkFun_u-blox_NEO-F10N"},{"description":"The SparkFun Thing Plus - RP2350 is a dynamic and powerful wireless development platform in the Thing Plus form factor built around Raspberry Pi's RP2350 microcontroller..","homepage":"https://docs.sparkfun.com/SparkFun_Thing_Plus_RP2350/","name":"SparkFun_Thing_Plus_RP2350","url":"https://github.com/sparkfun/SparkFun_Thing_Plus_RP2350"},{"description":"Documentation and hardware repository for the SparkFun Triband GNSS RTK Breakout, featuring the UM980 high precision GNSS/RTK module from Unicore Communications","homepage":"https://docs.sparkfun.com/SparkFun_UM980_Triband_GNSS_RTK_Breakout/","name":"SparkFun_UM980_Triband_GNSS_RTK_Breakout","url":"https://github.com/sparkfun/SparkFun_UM980_Triband_GNSS_RTK_Breakout"},{"description":"Documentation, example code, and hardware for the SparkFun Soft Power Switch - JST 2mm.","homepage":"https://docs.sparkfun.com/SparkFun_Soft_Power_Switch_Mk2","name":"SparkFun_Soft_Power_Switch_Mk2","url":"https://github.com/sparkfun/SparkFun_Soft_Power_Switch_Mk2"},{"description":"The SparkFun Pro Micro - RP2350 is a compact and versatile development board built around Raspberry Pi's RP2350 microcontroller.","homepage":"https://docs.sparkfun.com/SparkFun_Pro_Micro_RP2350/introduction/","name":"SparkFun_Pro_Micro_RP2350","url":"https://github.com/sparkfun/SparkFun_Pro_Micro_RP2350"},{"description":"Documentation, example code, and hardware design files for the SparkFun Qwiic Directional Pad. Add a D-Pad to your next project with Qwiic!","homepage":"https://docs.sparkfun.com/SparkFun_Qwiic_Directional_Pad/","name":"SparkFun_Qwiic_Directional_Pad","url":"https://github.com/sparkfun/SparkFun_Qwiic_Directional_Pad"},{"description":"SparkFun's RTK Evaluation Kit: ESP32-WROVER, ZED-F9P, NEO-D9S, LARA-R6001D, W5500","homepage":"http://docs.sparkfun.com/SparkFun_RTK_EVK/","name":"SparkFun_RTK_EVK","url":"https://github.com/sparkfun/SparkFun_RTK_EVK"},{"description":"Documentation and hardware files for the Qwiic Power Switch, which is a power switch for the Qwiic system.","homepage":"https://docs.sparkfun.com/SparkFun_Qwiic_Power_Switch/","name":"SparkFun_Qwiic_Power_Switch","url":"https://github.com/sparkfun/SparkFun_Qwiic_Power_Switch"},{"description":"Documentation, example code, and hardware for the SparkFun Soft Power Switch - USB-C.","homepage":"https://docs.sparkfun.com/SparkFun_Soft_Power_Switch_USB-C","name":"SparkFun_Soft_Power_Switch_USB-C","url":"https://github.com/sparkfun/SparkFun_Soft_Power_Switch_USB-C"},{"description":"","homepage":"https://docs.sparkfun.com/SparkFun_Optical_Tracking_Odometry_Sensor","name":"SparkFun_Optical_Tracking_Odometry_Sensor","url":"https://github.com/sparkfun/SparkFun_Optical_Tracking_Odometry_Sensor"},{"description":"A SparkFun Thing Plus development board for the ESP32-S3.","homepage":"https://docs.sparkfun.com/SparkFun_Thing_Plus_ESP32-S3/","name":"SparkFun_Thing_Plus_ESP32-S3","url":"https://github.com/sparkfun/SparkFun_Thing_Plus_ESP32-S3"},{"description":"Documentation and firmware for the SparkFun DataLogger IoT line of products.","homepage":"https://docs.sparkfun.com/SparkFun_DataLogger/","name":"SparkFun_DataLogger","url":"https://github.com/sparkfun/SparkFun_DataLogger"},{"description":"The SparkFun Simultaneous RFID Reader - M7E offers a simple way to read and write UFH RFID tags (EPCglobal Gen 2).","homepage":"http://docs.sparkfun.com/SparkFun_Simultaneous_RFID_Reader_M7E/","name":"SparkFun_Simultaneous_RFID_Reader_M7E","url":"https://github.com/sparkfun/SparkFun_Simultaneous_RFID_Reader_M7E"},{"description":"The SparkFun RTK mosaic-X5 is a GNSS station based on the Septentrio mosaic-X5 GNSS receiver. It features an aluminum enclosure, support for a WiFi network bridge, data logging, and multiple power options, including PoE.","homepage":"https://docs.sparkfun.com/SparkFun_RTK_mosaic-X5/","name":"SparkFun_RTK_mosaic-X5","url":"https://github.com/sparkfun/SparkFun_RTK_mosaic-X5"},{"description":"A tutorial on how to build your own headphones with ambient microphones for loud environments.","homepage":"https://docs.sparkfun.com/SuperHeadphones/","name":"SuperHeadphones","url":"https://github.com/sparkfun/SuperHeadphones"},{"description":"How to Update Firmware on a Unicore GNSS Receiver","homepage":"https://docs.sparkfun.com/Update_Firmware_Unicore_GNSS_Receiver/","name":"Update_Firmware_Unicore_GNSS_Receiver","url":"https://github.com/sparkfun/Update_Firmware_Unicore_GNSS_Receiver"},{"description":"Tutorial and hardware files for the SparkFun Thing Plus NORA-W306, a dual-band WiFi (2.4GHz & 5GHz) and BLE 5.3 module by u-blox.","homepage":"https://docs.sparkfun.com/SparkFun_Thing_Plus_NORA-W306","name":"SparkFun_Thing_Plus_NORA-W306","url":"https://github.com/sparkfun/SparkFun_Thing_Plus_NORA-W306"},{"description":"Tutorial and hardware files for the SparkFun Qwiic Pulsed Coherent Radar Sensor - Acconeer XM125. The board brings powerful 60 GHz radar technology with millimeter precision to your projects. ","homepage":"https://docs.sparkfun.com/SparkFun_Qwiic_Pulsed_Radar_Sensor_XM125/","name":"SparkFun_Qwiic_Pulsed_Radar_Sensor_XM125","url":"https://github.com/sparkfun/SparkFun_Qwiic_Pulsed_Radar_Sensor_XM125"},{"description":"Arduino Library for SparkFun's OLED Qwiic (I²C) boards","homepage":"https://docs.sparkfun.com/SparkFun_Qwiic_OLED_Arduino_Library/introduction/","name":"SparkFun_Qwiic_OLED_Arduino_Library","url":"https://github.com/sparkfun/SparkFun_Qwiic_OLED_Arduino_Library"},{"description":"An I²C-controlled Qwiic device that provides solderless plug-and-play buzzer sounds!","homepage":"https://docs.sparkfun.com/SparkFun_Qwiic_Buzzer","name":"SparkFun_Qwiic_Buzzer","url":"https://github.com/sparkfun/SparkFun_Qwiic_Buzzer"},{"description":"Tutorial and hardware files  for a digital switch capable of switching DC loads up to 12V. Includes 3.3V Buck Regulator, N-channel MOSFET low-side switch circuit, and flyback diode on the load side.","homepage":"https://docs.sparkfun.com/SparkFun_MOSFET_Power_Switch_and_Buck_Regulator_Low-Side","name":"SparkFun_MOSFET_Power_Switch_and_Buck_Regulator_Low-Side","url":"https://github.com/sparkfun/SparkFun_MOSFET_Power_Switch_and_Buck_Regulator_Low-Side"},{"description":"","homepage":"http://docs.sparkfun.com/SparkFun_u-blox_NEO-F9P/","name":"SparkFun_u-blox_NEO-F9P","url":"https://github.com/sparkfun/SparkFun_u-blox_NEO-F9P"},{"description":"Environmental sensor that includes the ENS160 and BME280.","homepage":"http://docs.sparkfun.com/SparkFun_Environmental_Combo_Breakout_ENS160_BME280_QWIIC/introduction/","name":"SparkFun_Environmental_Combo_Breakout_ENS160_BME280_QWIIC","url":"https://github.com/sparkfun/SparkFun_Environmental_Combo_Breakout_ENS160_BME280_QWIIC"},{"description":"The BNO086 IMU has a combination triple axis accelerometer/gyro/magnetometer packaged with an ARM Cortex M0+ running powerful algorithms.","homepage":"https://docs.sparkfun.com/SparkFun_VR_IMU_Breakout_BNO086_QWIIC/","name":"SparkFun_VR_IMU_Breakout_BNO086_QWIIC","url":"https://github.com/sparkfun/SparkFun_VR_IMU_Breakout_BNO086_QWIIC"},{"description":"Arduino Library for SparkFun's Qwiic TMF882X breakout boards","homepage":"https://docs.sparkfun.com/SparkFun_Qwiic_TMF882X_Arduino_Library/","name":"SparkFun_Qwiic_TMF882X_Arduino_Library","url":"https://github.com/sparkfun/SparkFun_Qwiic_TMF882X_Arduino_Library"},{"description":"Using the u-blox SARA-R510M8S, this function board adds LTE and GNSS capabilities to the MicroMod EcoSystem.","homepage":"https://docs.sparkfun.com/SparkFun_MicroMod_LTE_GNSS_Function_Board_u-blox_SARA-R5/","name":"SparkFun_MicroMod_LTE_GNSS_Function_Board_u-blox_SARA-R5","url":"https://github.com/sparkfun/SparkFun_MicroMod_LTE_GNSS_Function_Board_u-blox_SARA-R5"},{"description":"The SparkFun MAX-M10S Breakout is an ultra-low-power, high performance, miniaturized GNSS board that is perfect for battery operated applications that don't possess a lot of space.","homepage":"https://docs.sparkfun.com/SparkFun_u-blox_MAX-M10S/","name":"SparkFun_u-blox_MAX-M10S","url":"https://github.com/sparkfun/SparkFun_u-blox_MAX-M10S"},{"description":"Qwiic breakout for the Sensirion SCD4x CO2 sensors.","homepage":"http://docs.sparkfun.com/SparkFun_Qwiic_CO2_Sensor_SCD4X/","name":"SparkFun_Qwiic_CO2_Sensor_SCD4X","url":"https://github.com/sparkfun/SparkFun_Qwiic_CO2_Sensor_SCD4X"},{"description":"A Qwiic-sized (1\"x1\") Development board featuring the ESP32-C6 MINI-1","homepage":"http://docs.sparkfun.com/SparkFun_Qwiic_Pocket_Dev_Board_ESP32_C6/introduction/","name":"SparkFun_Qwiic_Pocket_Dev_Board_ESP32_C6","url":"https://github.com/sparkfun/SparkFun_Qwiic_Pocket_Dev_Board_ESP32_C6"},{"description":"Qwiic Breakout Board for the Infineon XENSIV PAS CO2 Sensor.","homepage":"https://sparkfun.github.io/SparkFun_Qwiic_CO2_Sensor_XENSIV_PAS","name":"SparkFun_Qwiic_CO2_Sensor_XENSIV_PAS","url":"https://github.com/sparkfun/SparkFun_Qwiic_CO2_Sensor_XENSIV_PAS"},{"description":"","homepage":"https://docs.sparkfun.com/SparkFun_Spectral_UV_Sensor_AS7331/introduction/","name":"SparkFun_Spectral_UV_Sensor_AS7331","url":"https://github.com/sparkfun/SparkFun_Spectral_UV_Sensor_AS7331"},{"description":"","homepage":"https://docs.sparkfun.com/SparkFun_LTE_Stick_LARA_R6","name":"SparkFun_LTE_Stick_LARA_R6","url":"https://github.com/sparkfun/SparkFun_LTE_Stick_LARA_R6"},{"description":"The SparkFun Thing Plus ESP32-C6 is a wireless development board built around the ESP32-C6 WROOM-1-N16. ","homepage":"https://sparkfun.github.io/SparkFun_Thing_Plus_ESP32_C6","name":"SparkFun_Thing_Plus_ESP32_C6","url":"https://github.com/sparkfun/SparkFun_Thing_Plus_ESP32_C6"},{"description":"An indoor air quality board combining the SCD41 CO2 sensor and the SEN55 PPM/VOX with humidity and temperature as well.","homepage":"https://docs.sparkfun.com/SparkFun_Indoor_Air_Quality_Sensor-SCD41-SEN55/introduction/","name":"SparkFun_Indoor_Air_Quality_Sensor-SCD41-SEN55","url":"https://github.com/sparkfun/SparkFun_Indoor_Air_Quality_Sensor-SCD41-SEN55"},{"description":"Documentation and Hardware for the SparkFun XBee Development Board","homepage":"https://docs.sparkfun.com/SparkFun_Digi_XBee_Development_Board/","name":"SparkFun_Digi_XBee_Development_Board","url":"https://github.com/sparkfun/SparkFun_Digi_XBee_Development_Board"},{"description":"Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.","homepage":"https://docs.sparkfun.com/SparkFun_RTK_Firmware/","name":"SparkFun_RTK_Firmware","url":"https://github.com/sparkfun/SparkFun_RTK_Firmware"},{"description":"The ESP32 Pico in a classic Pro Mini form factor.","homepage":"https://docs.sparkfun.com/SparkFun_ESP32_Qwiic_Pro_Mini","name":"SparkFun_ESP32_Qwiic_Pro_Mini","url":"https://github.com/sparkfun/SparkFun_ESP32_Qwiic_Pro_Mini"},{"description":"Documentation and Hardware for the SparkFun Ultrasonic Distance Sensor -Qwiic","homepage":"https://docs.sparkfun.com/SparkFun_Ultrasonic_Distance_Sensor-Qwiic/","name":"SparkFun_Ultrasonic_Distance_Sensor-Qwiic","url":"https://github.com/sparkfun/SparkFun_Ultrasonic_Distance_Sensor-Qwiic"},{"description":"Breakout board for the ST STH34PF80 low-power, high-sensitivity infrared (IR) sensor for presence and motion detection.","homepage":"https://docs.sparkfun.com/SparkFun_Qwiic_Human_Presence_Sensor-STHS34PF80/","name":"SparkFun_Qwiic_Human_Presence_Sensor-STHS34PF80","url":"https://github.com/sparkfun/SparkFun_Qwiic_Human_Presence_Sensor-STHS34PF80"},{"description":"USB-C Host Shield","homepage":"https://docs.sparkfun.com/SparkFun_USB-C_Host_Shield/","name":"SparkFun_USB-C_Host_Shield","url":"https://github.com/sparkfun/SparkFun_USB-C_Host_Shield"},{"description":"The SparkFun Thing Plus - RA6M5 is a development board featuring the high-performance RA6M5 microcontroller from Renesas, which is perfect for real-time applications. ","homepage":"http://docs.sparkfun.com/SparkFun_Thing_Plus_RA6M5/","name":"SparkFun_Thing_Plus_RA6M5","url":"https://github.com/sparkfun/SparkFun_Thing_Plus_RA6M5"},{"description":"The hardware repository for an IoT motor driver development board using the ESP32","homepage":"https://docs.sparkfun.com/SparkFun_IoT_Brushless_Motor_Driver/","name":"SparkFun_IoT_Brushless_Motor_Driver","url":"https://github.com/sparkfun/SparkFun_IoT_Brushless_Motor_Driver"},{"description":"Toolkit of common functionality for use within SparkFun Libraries","homepage":"https://docs.sparkfun.com/SparkFun_Toolkit/","name":"SparkFun_Toolkit","url":"https://github.com/sparkfun/SparkFun_Toolkit"},{"description":"Repository for the SparkFun GPS Breakout - Chip Antenna, SAM-M10Q (Qwiic) ","homepage":"https://docs.sparkfun.com/SparkFun_u-blox_SAM-M10Q/","name":"SparkFun_u-blox_SAM-M10Q","url":"https://github.com/sparkfun/SparkFun_u-blox_SAM-M10Q"},{"description":"Breakout board for the mosaic-X5 triband GNSS receiver with RTK capabilities.","homepage":"https://docs.sparkfun.com/SparkFun_GNSS_mosaic-X5/","name":"SparkFun_GNSS_mosaic-X5","url":"https://github.com/sparkfun/SparkFun_GNSS_mosaic-X5"},{"description":"The datasheets and documentation for the centimeter level RTK Torch GNSS receiver with built in tilt compensation.","homepage":"https://www.sparkfun.com/products/25662","name":"SparkFun_RTK_Torch","url":"https://github.com/sparkfun/SparkFun_RTK_Torch"},{"description":"1.30\" OLED display: 128 x 64 white pixels; Qwiic connections","homepage":"https://docs.sparkfun.com/SparkFun_Qwiic_OLED_1.3in","name":"SparkFun_Qwiic_OLED_1.3in","url":"https://github.com/sparkfun/SparkFun_Qwiic_OLED_1.3in"},{"description":"Documentation and Hardware Files for the SparkFun XBee Arduino Shield","homepage":"https://docs.sparkfun.com/SparkFun_Digi_XBee_Arduino_Shield-USB-C","name":"SparkFun_Digi_XBee_Arduino_Shield-USB-C","url":"https://github.com/sparkfun/SparkFun_Digi_XBee_Arduino_Shield-USB-C"},{"description":"Documentation and Hardware for the SparkFun XBee Regulated Qwiic","homepage":"http://docs.sparkfun.com/SparkFun_Digi_XBee_Regulated_Qwiic","name":"SparkFun_Digi_XBee_Regulated_Qwiic","url":"https://github.com/sparkfun/SparkFun_Digi_XBee_Regulated_Qwiic"},{"description":"Documentation and Hardware for the SparkFun XBee Explorer USB-C","homepage":"http://docs.sparkfun.com/SparkFun_Digi_XBee_Explorer_USB-C","name":"SparkFun_Digi_XBee_Explorer_USB-C","url":"https://github.com/sparkfun/SparkFun_Digi_XBee_Explorer_USB-C"},{"description":"ESP32-WROOM Thing Plus with USB-C.","homepage":"https://docs.sparkfun.com/SparkFun_Thing_Plus_ESP32_WROOM_C/","name":"SparkFun_Thing_Plus_ESP32_WROOM_C","url":"https://github.com/sparkfun/SparkFun_Thing_Plus_ESP32_WROOM_C"},{"description":"The SparkFun GNSS Combo Breakout - ZED-F9P, NEO-D9S (Qwiic) (GPS-22560) combines the u-blox ZED-F9P multi-band high precision GNSS module with the NEO-D9S L-band GNSS correction data receiver.","homepage":"http://docs.sparkfun.com/SparkFun_GNSS_Combo_Breakout-ZED-F9P_NEO-D9S/","name":"SparkFun_GNSS_Combo_Breakout-ZED-F9P_NEO-D9S","url":"https://github.com/sparkfun/SparkFun_GNSS_Combo_Breakout-ZED-F9P_NEO-D9S"},{"description":"A simple to use radio modem for long distances using LoRa.","homepage":"https://docs.sparkfun.com/SparkFun_LoRaSerial/","name":"SparkFun_LoRaSerial","url":"https://github.com/sparkfun/SparkFun_LoRaSerial"},{"description":"Hardware Repo for the SparkFun Qwiic 6DoF BMI270 and the SparkFun Micro Qwiic 6DoF BMI270","homepage":"http://docs.sparkfun.com/SparkFun_Qwiic_6DoF_BMI270/","name":"SparkFun_Qwiic_6DoF_BMI270","url":"https://github.com/sparkfun/SparkFun_Qwiic_6DoF_BMI270"},{"description":"Documentation and Hardware Files for the SparkFun Pro Micro ESP32-C3","homepage":"https://docs.sparkfun.com/SparkFun_Pro_Micro-ESP32C3","name":"SparkFun_Pro_Micro-ESP32C3","url":"https://github.com/sparkfun/SparkFun_Pro_Micro-ESP32C3"},{"description":"Breakout board for the Texas Instruments TMAG5273 low-power linear 3D Hall-effect sensor. ","homepage":"https://docs.sparkfun.com/SparkFun_Qwiic_Hall_Effect_Sensor_TMAG5273/","name":"SparkFun_Qwiic_Hall_Effect_Sensor_TMAG5273","url":"https://github.com/sparkfun/SparkFun_Qwiic_Hall_Effect_Sensor_TMAG5273"},{"description":"Documentation and Hardware for the SparkFun Tristimulus Color Sensor OPT4048","homepage":"http://docs.sparkfun.com/SparkFun_Tristimulus_Color_Sensor-OPT4048","name":"SparkFun_Tristimulus_Color_Sensor-OPT4048","url":"https://github.com/sparkfun/SparkFun_Tristimulus_Color_Sensor-OPT4048"},{"description":"The hardware repository for a SparkFun breakout board utilizing the TMC6300 motor driver.","homepage":"http://docs.sparkfun.com/SparkFun_Three_Phase_Motor_Driver-TMC6300/","name":"SparkFun_Three_Phase_Motor_Driver-TMC6300","url":"https://github.com/sparkfun/SparkFun_Three_Phase_Motor_Driver-TMC6300"},{"description":"Documentation and Hardware Files for the SparkFun 6DoF LSM6DS16X","homepage":"https://docs.sparkfun.com/SparkFun_6DoF_LSM6DSV16X/","name":"SparkFun_6DoF_LSM6DSV16X","url":"https://github.com/sparkfun/SparkFun_6DoF_LSM6DSV16X"},{"description":"Top level repo for a suite of buck regulator form factors using the AP3429A buck regulator.","homepage":"https://docs.sparkfun.com/SparkFun_Buck_Regulator_AP3429A/","name":"SparkFun_Buck_Regulator_AP3429A","url":"https://github.com/sparkfun/SparkFun_Buck_Regulator_AP3429A"},{"description":"Top level repo for a suite of buck regulator form factors using the AP63357DV-7 adjustable buck regulator.","homepage":"http://docs.sparkfun.com/SparkFun_Buck_Regulator_AP63357DV-7/","name":"SparkFun_Buck_Regulator_AP63357DV-7","url":"https://github.com/sparkfun/SparkFun_Buck_Regulator_AP63357DV-7"},{"description":"A Qwiic enabled breakout boards based on the ultralow-power, high-accuracy, digital temperature sensor STTS22H from ST Microelectronics.","homepage":"https://docs.sparkfun.com/SparkFun_Temperature_Sensor-STTS22H/","name":"SparkFun_Temperature_Sensor-STTS22H","url":"https://github.com/sparkfun/SparkFun_Temperature_Sensor-STTS22H"}]