MyVaillant Heating Boiler energy entities missing after update

[Griffenz]

Hello, since update from v0.8.17 to v0.8.22, I am missing my Heating Boiler entities related to energy. Everything was available and running fine before. Is there anything I can do to return it? I tried downgrade back to v0.8.17 but it says this entity is not included in mypyllant integration.

Thank you for checking and answer in advance! :)

[RonnyStraetling]

Same here.

[jpoliak]

Same problem

[JOT-68]

same here

[TommyD91]

same problem

[RobertSorgenfrei]

same here

[estebanri87]

Same here

[hehe-coder]

Unitower Sensors are unavailable.

[seltsamt]

Same problem here.

[RobertSorgenfrei]

no solution?

[Vladx71]

Now the difference comparing to the previous occasions, the same function is working in the MyVaillant app but not from HA. I suppose Vaillant has changed something again...

[zaphylis]

Same for me.
My "Vaillant aroTHERM plus heatpump + sensoCOMFORT VRC 720 + sensoNET VR 921" was reporting beautifully up to the update.

[JOT-68]

works again, for whatever reason

[kroeckx]

I downgraded since I've had that issue, and the downgraded version sometimes works, sometimes doesn't. I currently assume there is at least a problem at vaillant.

[Vladx71]

After checking a bit more, for some non-obvious reason the entities are renamed, so the data is there I just need to query another entity....

potala_device_0_vu_25cs_1_5_n_int2_ecotec_plus_consumed_electrical_energy_heating potala_device_0_vu_25cs_1_5_n_int2_ecotec_plus_consumed_primary_energy_heating_2

[TommyD91]

What is the situation with you? I am still not getting any data

[Griffenz]

I doublechecked the entities as @Vladx71 wrote. I did find them. Everything works fine so far.

I do have:

• myVAILLANT v0.8.22 with configuration see picture below (currently I am testing with Fetch Energy Management Data and 3600 seconds between energy data updates)
• Vaillant VU 10CS/1-5 (N-INT2) ecoTEC plus
• Vaillant VR 940f Wi-Fi Gateway
• Vaillant sensoROOM VRT 51f

[kroeckx]

With the 0.8.22 I see 5 entities as unavailable:
sensor.XXX_device_0_arotherm_consumed_electrical_energy_cooling
sensor.XXX_device_0_arotherm_consumed_electrical_energy_domestic_hot_water
sensor.XXX_device_0_arotherm_consumed_electrical_energy_heating
sensor.XXX_device_1_unitower_consumed_electrical_energy_domestic_hot_water
sensor.XXX_device_1_unitower_consumed_electrical_energy_heating

I can't find any order energy entities.

[hehe-coder]

Everything is working fine again ! I guess the problems had been due to Vaillant. But even in the app they give an hint that data update can take a while.

[TommyD91]

After I deleted the whole thing in hacs and reinstalled it, it now works again

[jpoliak]

Deleting or reactivating HA really not help. there is no update of Vailant, only update on HA. Do we can expect any bug fix soon?

[stegmannb]

After I deleted the whole thing in hacs and reinstalled it, it now works again

I had no luck with that. Energy entities are still missing after reinstalling the plugin.

[Kaot93]

I had the same problem and got it working again with following settings. Let's see how long it will last

[frans0180]

same problem here

With the 0.8.22 I see 5 entities as unavailable:
sensor.XXX_device_0_arotherm_consumed_electrical_energy_cooling
sensor.XXX_device_0_arotherm_consumed_electrical_energy_domestic_hot_water
sensor.XXX_device_0_arotherm_consumed_electrical_energy_heating
sensor.XXX_device_1_unitower_consumed_electrical_energy_domestic_hot_water
sensor.XXX_device_1_unitower_consumed_electrical_energy_heating

when can we expect a response?

[h4de5]

did you check quota messages in the logs. vaillant seems to be limiting access to this data. if you see those errors in the logs try to contact them and ask to be excluded from query limits.

[gio-dot]

did you check quota messages in the logs. vaillant seems to be limiting access to this data. if you see those errors in the logs try to contact them and ask to be excluded from query limits.

Mmh do you really think that it is a viable way? Who should we contact??

[kroeckx]

For me the names of the sensors changed

[hehe-coder]

I guess Vaillant is limiting the Access to the data. My homeassistant shows the Energy data a few days, zehn a few days Not, then again Shows this data. Same simultanously in the MyVaillant App.

[gio-dot]

I guess Vaillant is limiting the Access to the data. My homeassistant shows the Energy data a few days, zehn a few days Not, then again Shows this data. Same simultanously in the MyVaillant App.

The same situation is for me, but i remember that until same weeks ago it worked for a long period without issues. It seems that the problem appear randomly without a specific reason in our side (my configuration isn't changed since several months).

[Vladx71]

Same with me. After the last blackout couple of weeks ago it was ok for a few days and now it is gone again. I’m sure this is some kind of rate limit issue Sent from mobile

…

On Fri, Jan 3, 2025 at 15:24 Giovanni ***@***.***> wrote: I guess Vaillant is limiting the Access to the data. My homeassistant shows the Energy data a few days, zehn a few days Not, then again Shows this data. Same simultanously in the MyVaillant App. The same situation is for me, but i remember that until same weeks ago it worked for a long period without issues. It seems that the problem appear randomly without a specific reason in our side (my configuration isn't changed since several months). — Reply to this email directly, view it on GitHub <#236 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AB3RO2QJPNL3G6SXPOYKP7L2I2MSVAVCNFSM6AAAAABRCUSZE2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKNRZGI4TINJQGM> . You are receiving this because you were mentioned.Message ID: ***@***.***>

[hehe-coder]

It is an another guess: Vaillant seems to struggle with its IT-Infrastructure. The MyVaillant App shows a message, that when no energy data are shown that they will be provided later. …

[kroeckx]

So my understanding is that we run into rate/quota limits, and reducing it from 3600 to 7200 seconds might fix it. It's my understanding that if we request the data, we get it for every hour of the day. Could we call it once, or possibly multiple times a day, and add it to the history at the correct hours instead of when we called it?