diff --git a/contrib/devtools/test_deterministic_coverage.sh b/contrib/devtools/test_deterministic_coverage.sh index 23c260b529fc8..885396bb25934 100755 --- a/contrib/devtools/test_deterministic_coverage.sh +++ b/contrib/devtools/test_deterministic_coverage.sh @@ -81,7 +81,7 @@ if ! command -v gcovr > /dev/null; then fi if [[ ! -e ${TEST_BITCOIN_BINARY} ]]; then - echo "Error: Executable ${TEST_BITCOIN_BINARY} not found. Run \"./configure --enable-lcov\" and compile." + echo "Error: Executable ${TEST_BITCOIN_BINARY} not found. Run \"cmake -B build -DCMAKE_BUILD_TYPE=Coverage\" and compile." exit 1 fi @@ -90,7 +90,7 @@ get_file_suffix_count() { } if [[ $(get_file_suffix_count gcno) == 0 ]]; then - echo "Error: Could not find any *.gcno files. The *.gcno files are generated by the compiler. Run \"./configure --enable-lcov\" and re-compile." + echo "Error: Could not find any *.gcno files. The *.gcno files are generated by the compiler. Run \"cmake -B build -DCMAKE_BUILD_TYPE=Coverage\" and re-compile." exit 1 fi @@ -115,7 +115,7 @@ while [[ ${TEST_RUN_ID} -lt ${N_TEST_RUNS} ]]; do fi rm "${TEST_OUTPUT_TEMPFILE}" if [[ $(get_file_suffix_count gcda) == 0 ]]; then - echo "Error: Running the test suite did not create any *.gcda files. The gcda files are generated when the instrumented test programs are executed. Run \"./configure --enable-lcov\" and re-compile." + echo "Error: Running the test suite did not create any *.gcda files. The gcda files are generated when the instrumented test programs are executed. Run \"cmake -B build -DCMAKE_BUILD_TYPE=Coverage\" and re-compile." exit 1 fi GCOVR_TEMPFILE=$(mktemp) diff --git a/doc/design/libraries.md b/doc/design/libraries.md index 335d3957d4550..24185bf4776df 100644 --- a/doc/design/libraries.md +++ b/doc/design/libraries.md @@ -8,7 +8,7 @@ | *libbitcoin_crypto* | Hardware-optimized functions for data encryption, hashing, message authentication, and key derivation. | | *libbitcoin_kernel* | Consensus engine and support library used for validation by *libbitcoin_node*. | | *libbitcoinqt* | GUI functionality used by *bitcoin-qt* and *bitcoin-gui* executables. | -| *libbitcoin_ipc* | IPC functionality used by *bitcoin-node*, *bitcoin-wallet*, *bitcoin-gui* executables to communicate when [`--enable-multiprocess`](multiprocess.md) is used. | +| *libbitcoin_ipc* | IPC functionality used by *bitcoin-node*, *bitcoin-wallet*, *bitcoin-gui* executables to communicate when [`-DWITH_MULTIPROCESS=ON`](multiprocess.md) is used. | | *libbitcoin_node* | P2P and RPC server functionality used by *bitcoind* and *bitcoin-qt* executables. | | *libbitcoin_util* | Home for common functionality shared by different executables and libraries. Similar to *libbitcoin_common*, but lower-level (see [Dependencies](#dependencies)). | | *libbitcoin_wallet* | Wallet functionality used by *bitcoind* and *bitcoin-wallet* executables. | diff --git a/doc/developer-notes.md b/doc/developer-notes.md index a630957f41785..952dbc77a0da7 100644 --- a/doc/developer-notes.md +++ b/doc/developer-notes.md @@ -418,8 +418,8 @@ see [test/functional/](/test/functional) for tests that run in `-regtest` mode. ### DEBUG_LOCKORDER Bitcoin Core is a multi-threaded application, and deadlocks or other -multi-threading bugs can be very difficult to track down. The `--enable-debug` -configure option adds `-DDEBUG_LOCKORDER` to the compiler flags. This inserts +multi-threading bugs can be very difficult to track down. The `-DCMAKE_BUILD_TYPE=Debug` +build option adds `-DDEBUG_LOCKORDER` to the compiler flags. This inserts run-time checks to keep track of which locks are held and adds warnings to the `debug.log` file if inconsistencies are detected. @@ -429,9 +429,8 @@ Defining `DEBUG_LOCKCONTENTION` adds a "lock" logging category to the logging RPC that, when enabled, logs the location and duration of each lock contention to the `debug.log` file. -The `--enable-debug` configure option adds `-DDEBUG_LOCKCONTENTION` to the -compiler flags. You may also enable it manually for a non-debug build by running -configure with `-DDEBUG_LOCKCONTENTION` added to your CPPFLAGS, +The `-DCMAKE_BUILD_TYPE=Debug` build option adds `-DDEBUG_LOCKCONTENTION` to the +compiler flags. You may also enable it manually by building with `-DDEBUG_LOCKCONTENTION` added to your CPPFLAGS, i.e. `CPPFLAGS="-DDEBUG_LOCKCONTENTION"`, then build and run bitcoind. You can then use the `-debug=lock` configuration option at bitcoind startup or @@ -579,7 +578,7 @@ cmake -B build -DSANITIZERS=thread If you are compiling with GCC you will typically need to install corresponding "san" libraries to actually compile with these flags, e.g. libasan for the address sanitizer, libtsan for the thread sanitizer, and libubsan for the -undefined sanitizer. If you are missing required libraries, the configure script +undefined sanitizer. If you are missing required libraries, the build will fail with a linker error when testing the sanitizer flags. The test suite should pass cleanly with the `thread` and `undefined` sanitizers. You @@ -595,7 +594,7 @@ See the CI config for more examples, and upstream documentation for more informa about any additional options. Not all sanitizer options can be enabled at the same time, e.g. trying to build -with `-DSANITIZERS=address,thread` will fail in the configure script as +with `-DSANITIZERS=address,thread` will fail in the build as these sanitizers are mutually incompatible. Refer to your compiler manual to learn more about these options and which sanitizers are supported by your compiler. @@ -619,7 +618,7 @@ The code is multi-threaded and uses mutexes and the Deadlocks due to inconsistent lock ordering (thread 1 locks `cs_main` and then `cs_wallet`, while thread 2 locks them in the opposite order: result, deadlock as each waits for the other to release its lock) are a problem. Compile with -`-DDEBUG_LOCKORDER` (or use `--enable-debug`) to get lock order inconsistencies +`-DDEBUG_LOCKORDER` (or use `-DCMAKE_BUILD_TYPE=Debug`) to get lock order inconsistencies reported in the `debug.log` file. Re-architecting the core code so there are better-defined interfaces @@ -1062,8 +1061,8 @@ bool Chainstate::PreciousBlock(BlockValidationState& state, CBlockIndex* pindex) ``` - Build and run tests with `-DDEBUG_LOCKORDER` to verify that no potential - deadlocks are introduced. As of 0.12, this is defined by default when - configuring with `--enable-debug`. + deadlocks are introduced. This is defined by default when + building with `-DCMAKE_BUILD_TYPE=Debug`. - When using `LOCK`/`TRY_LOCK` be aware that the lock exists in the context of the current scope, so surround the statement and the code that needs the lock diff --git a/doc/multiprocess.md b/doc/multiprocess.md index 7ba89b3ff56a2..fee50142d7b84 100644 --- a/doc/multiprocess.md +++ b/doc/multiprocess.md @@ -4,7 +4,7 @@ _This document describes usage of the multiprocess feature. For design informati ## Build Option -On unix systems, the `--enable-multiprocess` build option can be passed to `./configure` to build new `bitcoin-node`, `bitcoin-wallet`, and `bitcoin-gui` executables alongside existing `bitcoind` and `bitcoin-qt` executables. +On Unix systems, the `-DWITH_MULTIPROCESS=ON` build option can be passed to build the supplemental `bitcoin-node` and `bitcoin-gui` multiprocess executables. ## Debugging @@ -17,15 +17,15 @@ The multiprocess feature requires [Cap'n Proto](https://capnproto.org/) and [lib ``` cd make -C depends NO_QT=1 MULTIPROCESS=1 -CONFIG_SITE=$PWD/depends/x86_64-pc-linux-gnu/share/config.site ./configure -make -src/bitcoin-node -regtest -printtoconsole -debug=ipc -BITCOIND=bitcoin-node test/functional/test_runner.py +cmake -B build --toolchain=depends/x86_64-pc-linux-gnu/toolchain.cmake +cmake --build build +build/src/bitcoin-node -regtest -printtoconsole -debug=ipc +BITCOIND=$(pwd)/build/src/bitcoin-node build/test/functional/test_runner.py ``` -The configure script will pick up settings and library locations from the depends directory, so there is no need to pass `--enable-multiprocess` as a separate flag when using the depends system (it's controlled by the `MULTIPROCESS=1` option). +The `cmake` build will pick up settings and library locations from the depends directory, so there is no need to pass `-DWITH_MULTIPROCESS=ON` as a separate flag when using the depends system (it's controlled by the `MULTIPROCESS=1` option). -Alternately, you can install [Cap'n Proto](https://capnproto.org/) and [libmultiprocess](https://github.com/chaincodelabs/libmultiprocess) packages on your system, and just run `./configure --enable-multiprocess` without using the depends system. The configure script will be able to locate the installed packages via [pkg-config](https://www.freedesktop.org/wiki/Software/pkg-config/). See [Installation](https://github.com/chaincodelabs/libmultiprocess/blob/master/doc/install.md) section of the libmultiprocess readme for install steps. See [build-unix.md](build-unix.md) and [build-osx.md](build-osx.md) for information about installing dependencies in general. +Alternately, you can install [Cap'n Proto](https://capnproto.org/) and [libmultiprocess](https://github.com/chaincodelabs/libmultiprocess) packages on your system, and just run `cmake -B build -DWITH_MULTIPROCESS=ON` without using the depends system. The `cmake` build will be able to locate the installed packages via [pkg-config](https://www.freedesktop.org/wiki/Software/pkg-config/). See [Installation](https://github.com/chaincodelabs/libmultiprocess/blob/master/doc/install.md) section of the libmultiprocess readme for install steps. See [build-unix.md](build-unix.md) and [build-osx.md](build-osx.md) for information about installing dependencies in general. ## Usage diff --git a/doc/translation_process.md b/doc/translation_process.md index e5ed7f4e0ae73..f4f0add54ff4b 100644 --- a/doc/translation_process.md +++ b/doc/translation_process.md @@ -18,8 +18,8 @@ We use automated scripts to help extract translations in both Qt, and non-Qt sou To automatically regenerate the `bitcoin_en.ts` file, run the following commands: ```sh -cd src/ -make translate +cmake -B build --preset dev-mode -DWITH_BDB=ON -DBUILD_GUI=ON +cmake --build build --target translate ``` **Example Qt translation** diff --git a/doc/translation_strings_policy.md b/doc/translation_strings_policy.md index 1931302ddafdb..4aa4969209842 100644 --- a/doc/translation_strings_policy.md +++ b/doc/translation_strings_policy.md @@ -1,10 +1,8 @@ -Translation Strings Policy -=========================== +# Translation Strings Policy This document provides guidelines for internationalization of the Bitcoin Core software. -How to translate? ------------------- +## How to translate? To mark a message as translatable @@ -14,8 +12,7 @@ To mark a message as translatable No internationalization is used for e.g. developer scripts outside `src`. -Strings to be translated -------------------------- +## Strings to be translated On a high level, these strings are to be translated: @@ -27,8 +24,7 @@ Do not translate technical or extremely rare errors. Anything else that appears to the user in the GUI is to be translated. This includes labels, menu items, button texts, tooltips and window titles. This includes messages passed to the GUI through the UI interface through `InitMessage`, `ThreadSafeMessageBox` or `ShowProgress`. -General recommendations ------------------------- +## General recommendations ### Avoid unnecessary translation strings @@ -97,4 +93,4 @@ The second example reduces the number of pluralized words that translators have During a string freeze (often before a major release), no translation strings are to be added, modified or removed. -This can be checked by executing `make translate` in the `src` directory, then verifying that `bitcoin_en.ts` remains unchanged. +This can be checked by building the `translate` target with `cmake` ([instructions](translation_process.md)), then verifying that `bitcoin_en.ts` remains unchanged. diff --git a/doc/zmq.md b/doc/zmq.md index 07c340fb99e8f..fe599eb00ceaf 100644 --- a/doc/zmq.md +++ b/doc/zmq.md @@ -47,10 +47,10 @@ operation. ## Enabling By default, the ZeroMQ feature is automatically compiled in if the -necessary prerequisites are found. To disable, use --disable-zmq +necessary prerequisites are found. To disable, use -DWITH_ZMQ=OFF during the *configure* step of building bitcoind: - $ ./configure --disable-zmq (other options) + $ cmake -B build -DWITH_ZMQ=OFF (other options) To actually enable operation, one must set the appropriate options on the command line or in the configuration file. @@ -163,7 +163,7 @@ Note that for `*block` topics, when the block chain tip changes, a reorganisation may occur and just the tip will be notified. It is up to the subscriber to retrieve the chain from the last known block to the new tip. Also note that no notification will occur if the tip -was in the active chain--as would be the case after calling invalidateblock RPC. +was in the active chain, as would be the case after calling the `invalidateblock` RPC. In contrast, the `sequence` topic publishes all block connections and disconnections. diff --git a/share/qt/extract_strings_qt.py b/share/qt/extract_strings_qt.py index 39acec89423bb..4297143023e33 100755 --- a/share/qt/extract_strings_qt.py +++ b/share/qt/extract_strings_qt.py @@ -56,7 +56,7 @@ def parse_po(text): XGETTEXT=os.getenv('XGETTEXT', 'xgettext') if not XGETTEXT: print('Cannot extract strings: xgettext utility is not installed or not configured.',file=sys.stderr) - print('Please install package "gettext" and re-run \'./configure\'.',file=sys.stderr) + print('Please install package "gettext" and re-run \'cmake -B build\'.',file=sys.stderr) sys.exit(1) child = Popen([XGETTEXT,'--output=-','--from-code=utf-8','-n','--keyword=_'] + files, stdout=PIPE) (out, err) = child.communicate() diff --git a/src/qt/README.md b/src/qt/README.md index 1c6f963ccf06e..3ecdd0888e725 100644 --- a/src/qt/README.md +++ b/src/qt/README.md @@ -99,7 +99,7 @@ sudo apt-get install qtcreator #### Setup Qt Creator 1. Make sure you've installed all dependencies specified in your systems build instructions -2. Follow the compile instructions for your system, run `./configure` with the `--enable-debug` flag +2. Follow the compile instructions for your system, adding the `-DCMAKE_BUILD_TYPE=Debug` build flag 3. Start Qt Creator. At the start page, do: `New` -> `Import Project` -> `Import Existing Project` 4. Enter `bitcoin-qt` as the Project Name and enter the absolute path to `src/qt` as Location 5. Check over the file selection, you may need to select the `forms` directory (necessary if you intend to edit *.ui files) diff --git a/src/util/fs_helpers.cpp b/src/util/fs_helpers.cpp index 41c8fe3b8f462..e01f9a61e9b02 100644 --- a/src/util/fs_helpers.cpp +++ b/src/util/fs_helpers.cpp @@ -22,7 +22,7 @@ #include #ifndef WIN32 -// for posix_fallocate, in configure.ac we check if it is present after this +// for posix_fallocate, in cmake/introspection.cmake we check if it is present after this #ifdef __linux__ #ifdef _POSIX_C_SOURCE diff --git a/test/functional/test_runner.py b/test/functional/test_runner.py index 3297a1069939b..41390cf26aa0e 100755 --- a/test/functional/test_runner.py +++ b/test/functional/test_runner.py @@ -488,7 +488,7 @@ def main(): if not enable_bitcoind: print("No functional tests to run.") - print("Rerun ./configure with --with-daemon and then make") + print("Re-compile with the -DBUILD_DAEMON=ON build option") sys.exit(1) # Build list of tests diff --git a/test/lint/lint-spelling.py b/test/lint/lint-spelling.py index 3e578b218f10a..945288a3dd875 100755 --- a/test/lint/lint-spelling.py +++ b/test/lint/lint-spelling.py @@ -14,7 +14,7 @@ from lint_ignore_dirs import SHARED_EXCLUDED_SUBTREES IGNORE_WORDS_FILE = 'test/lint/spelling.ignore-words.txt' -FILES_ARGS = ['git', 'ls-files', '--', ":(exclude)build-aux/m4/", ":(exclude)contrib/seeds/*.txt", ":(exclude)depends/", ":(exclude)doc/release-notes/", ":(exclude)src/qt/locale/", ":(exclude)src/qt/*.qrc", ":(exclude)contrib/guix/patches"] +FILES_ARGS = ['git', 'ls-files', '--', ":(exclude)contrib/seeds/*.txt", ":(exclude)depends/", ":(exclude)doc/release-notes/", ":(exclude)src/qt/locale/", ":(exclude)src/qt/*.qrc", ":(exclude)contrib/guix/patches"] FILES_ARGS += [f":(exclude){dir}" for dir in SHARED_EXCLUDED_SUBTREES] diff --git a/test/util/test_runner.py b/test/util/test_runner.py index 1cd368f6f442a..e4a77d53d6eed 100755 --- a/test/util/test_runner.py +++ b/test/util/test_runner.py @@ -5,7 +5,7 @@ # file COPYING or http://www.opensource.org/licenses/mit-license.php. """Test framework for bitcoin utils. -Runs automatically during `make check`. +Runs automatically during `ctest --test-dir build/`. Can also be run manually."""