-
Notifications
You must be signed in to change notification settings - Fork 180
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
OpenOCD not working on mac #272
Comments
I'm experiencing the exact same issue. |
I had a similar issue on Big Sur, but with a nucleo-F439ZI board. In my case, following the hint in #263 helped and I was able to get it to work with the newer stlink config. Maybe try:
For me it worked with the nucleo attached both directly to one of the USB-C ports of the mac as well as an USB 3.1 port on a docking station. |
I am currently experiencing a similar issue, but my error message is a bit different: Open On-Chip Debugger 0.11.0 There is not any information about why the error occurs either. |
I'm getting the same sorta issue - unable to find anything. |
someone got the issue solved? |
I followed all the steps of installing tools required for stm32f3discovery board on Macbook Pro having USB3.0 ports yet when I ran openocd -f interface/stlink-v2.cfg -f target/stm32f3x.cfg I get the following result
Open On-Chip Debugger 0.10.0
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select '.
adapter speed: 1000 kHz
adapter_nsrst_delay: 100
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
none separate
Info : Unable to match requested speed 1000 kHz, using 950 kHz
Info : Unable to match requested speed 1000 kHz, using 950 kHz
Info : clock speed 950 kHz
Error: open failed
in procedure 'init'
in procedure 'ocd_bouncer'
To my best knowledge, I think its an issue due to usb 3.0 but since I am a newbie I require assistance from sonsummate professionals
The text was updated successfully, but these errors were encountered: