This guide provides steps to be followed when you upgrade your applications to a newer version of Tendermint Core.
This release contains a breaking change to both the block and p2p protocols, however it may be compatible with blockchains created with v0.29.0 depending on the chain history. If your blockchain has not included any pieces of evidence, or no piece of evidence has been included in more than one block, and if your application has never returned multiple updates for the same validator in a single block, then v0.30.0 will work fine with blockchains created with v0.29.0.
The p2p protocol change is to fix the proposer selection algorithm again. Note that proposer selection is purely a p2p concern right now since the algorithm is only relevant during real time consensus. This change is thus compatible with v0.29.0, but all nodes must be upgraded to avoid disagreements on the proposer.
Applications must ensure they do not return duplicates in
ResponseEndBlock.ValidatorUpdates. A pubkey must only appear once per set of
updates. Duplicates will cause irrecoverable failure. If you have a very good
reason why we shouldn't do this, please open an issue.
This release contains some breaking changes to the block and p2p protocols, and will not be compatible with any previous versions of the software, primarily due to changes in how various data structures are hashed.
Any implementations of Tendermint blockchain verification, including lite clients, will need to be updated. For specific details:
There was also a small change to field ordering in the vote struct. Any implementations of an out-of-process validator (like a Key-Management Server) will need to be updated. For specific details:
Finally, the proposer selection algorithm continues to evolve. See the work-in-progress specification.
For everything else, please see the CHANGELOG.
This release breaks the format for the priv_validator.json file
and the protocol used for the external validator process.
It is compatible with v0.27.0 blockchains (neither the BlockProtocol nor the
P2PProtocol have changed).
Please read carefully for details about upgrading.
Note: Backup your config/priv_validator.json
before proceeding.
The config/priv_validator.json is now two files:
config/priv_validator_key.json and data/priv_validator_state.json.
The former contains the key material, the later contains the details on the last
message signed.
When running v0.28.0 for the first time, it will back up any pre-existing
priv_validator.json file and proceed to split it into the two new files.
Upgrading should happen automatically without problem.
To upgrade manually, use the provided privValUpgrade.go script, with exact paths for the old
priv_validator.json and the locations for the two new files. It's recomended
to use the default paths, of config/priv_validator_key.json and
data/priv_validator_state.json, respectively:
go run scripts/privValUpgrade.go <old-path> <new-key-path> <new-state-path>
The Unix and TCP implementations of the remote signing validator have been consolidated into a single implementation. Thus in both cases, the external process is expected to dial Tendermint. This is different from how Unix sockets used to work, where Tendermint dialed the external process.
The PubKeyMsg was also split into separate Request and Response types
for consistency with other messages.
Note that the TCP sockets don't yet use a persistent key, so while they're encrypted, they can't yet be properly authenticated. See #3105. Note the Unix socket has neither encryption nor authentication, but will add a shared-secret in #3099.
This release contains some breaking changes to the block and p2p protocols, but does not change any core data structures, so it should be compatible with existing blockchains from the v0.26 series that only used Ed25519 validator keys. Blockchains using Secp256k1 for validators will not be compatible. This is due to the fact that we now enforce which key types validators can use as a consensus param. The default is Ed25519, and Secp256k1 must be activated explicitly.
It is recommended to upgrade all nodes at once to avoid incompatibilities at the
peer layer - namely, the heartbeat consensus message has been removed (only
relevant if create_empty_blocks=false or create_empty_blocks_interval > 0),
and the proposer selection algorithm has changed. Since proposer information is
never included in the blockchain, this change only affects the peer layer.
The ReverseIterator API has changed the meaning of start and end.
Before, iteration was from start to end, where
start > end. Now, iteration is from end to start, where start < end.
The iterator also excludes end. This change allows a simplified and more
intuitive logic, aligning the semantic meaning of start and end in the
Iterator and ReverseIterator.
This release enforces a new consensus parameter, the ValidatorParams.PubKeyTypes. Applications must ensure that they only return validator updates with the allowed PubKeyTypes. If a validator update includes a pubkey type that is not included in the ConsensusParams.Validator.PubKeyTypes, block execution will fail and the consensus will halt.
By default, only Ed25519 pubkeys may be used for validators. Enabling Secp256k1 requires explicit modification of the ConsensusParams. Please update your application accordingly (ie. restrict validators to only be able to use Ed25519 keys, or explicitly add additional key types to the genesis file).
This release contains a lot of changes to core data types and protocols. It is not compatible to the old versions and there is no straight forward way to update old data to be compatible with the new version.
To reset the state do:
$ tendermint unsafe_reset_all
Here we summarize some other notable changes to be mindful of.
All timeouts must be changed from integers to strings with their duration, for
instance flush_throttle_timeout = 100 would be changed to
flush_throttle_timeout = "100ms" and timeout_propose = 3000 would be changed
to timeout_propose = "3s".
The default behaviour of /abci_query has been changed to not return a proof,
and the name of the parameter that controls this has been changed from trusted
to prove. To get proofs with your queries, ensure you set prove=true.
Various version fields like amino_version, p2p_version, consensus_version,
and rpc_version have been removed from the node_info.other and are
consolidated under the tendermint semantic version (ie. node_info.version) and
the new block and p2p protocol versions under node_info.protocol_version.
Field numbers were bumped in the Header and ResponseInfo messages to make
room for new version fields. It should be straight forward to recompile the
protobuf file for these changes.
The ResponseQuery.Proof field is now structured as a []ProofOp to support
generalized Merkle tree constructions where the leaves of one Merkle tree are
the root of another. If you don't need this functionality, and you used to
return <proof bytes> here, you should instead return a single ProofOp with
just the Data field set:
[]ProofOp{
ProofOp{
Data: <proof bytes>,
}
}
For more information, see:
The merkle.Hasher interface was removed. Functions which used to take Hasher
now simply take []byte. This means that any objects being Merklized should be
serialized before they are passed in.
The node.RunForever function was removed. Signal handling and running forever
should instead be explicitly configured by the caller. See how we do it
here.
All hashes, except for public key addresses, are now 32-bytes.
This release has minimal impact.
If you use GasWanted in ABCI and want to enforce it, set the MaxGas in the genesis file (default is no max).
New 0.24.0 release contains a lot of changes to the state and types. It's not compatible to the old versions and there is no straight forward way to update old data to be compatible with the new version.
To reset the state do:
$ tendermint unsafe_reset_all
Here we summarize some other notable changes to be mindful of.
p2p.max_num_peers was removed in favor of p2p.max_num_inbound_peers and
p2p.max_num_outbound_peers.
# Maximum number of inbound peers
max_num_inbound_peers = 40
# Maximum number of outbound peers to connect to, excluding persistent peers
max_num_outbound_peers = 10
As you can see, the default ratio of inbound/outbound peers is 4/1. The reason is we want it to be easier for new nodes to connect to the network. You can tweak these parameters to alter the network topology.
The result of /commit used to contain header and commit fields at the top level. These are now contained under the signed_header field.
The header has been upgraded and contains new fields, but none of the existing fields were changed, except their order.
The Validator type was split into two, one containing an Address and one
containing a PubKey. When processing RequestBeginBlock, use the Validator
type, which contains just the Address. When returning ResponseEndBlock, use
the ValidatorUpdate type, which contains just the PubKey.
Validator set updates returned in ResponseEndBlock for height H used to take
effect immediately at height H+1. Now they will be delayed one block, to take
effect at height H+2. Note this means that the change will be seen by the ABCI
app in the RequestBeginBlock.LastCommitInfo at block H+3. Apps were already
required to maintain a map from validator addresses to pubkeys since v0.23 (when
pubkeys were removed from RequestBeginBlock), but now they may need to track
multiple validator sets at once to accomodate this delay.
The ConsensusParams.BlockSize.MaxTxs was removed in favour of
ConsensusParams.BlockSize.MaxBytes, which is now enforced. This means blocks
are limitted only by byte-size, not by number of transactions.