diff --git a/include/def/ALTHERMA(EBLA-EDLA EWAA-EWYA D SERIES 9-16KW).h b/include/def/ALTHERMA(EBLA-EDLA EWAA-EWYA D SERIES 9-16KW).h
index 228e717a..e95d6515 100644
--- a/include/def/ALTHERMA(EBLA-EDLA EWAA-EWYA D SERIES 9-16KW).h	
+++ b/include/def/ALTHERMA(EBLA-EDLA EWAA-EWYA D SERIES 9-16KW).h	
@@ -4,43 +4,43 @@
 
 LabelDef labelDefs[] = {
 //{0x00,0,802,0,-1,"*Refrigerant type"},
-//{0x00,0,152,1,-1,"Sensor Data Qty"},
-//{0x00,1,152,1,-1,"INV compressor Qty"},
+{0x00,0,152,1,-1,"Sensor Data Qty"},
+{0x00,1,152,1,-1,"INV compressor Qty"},
 //{0x00,2,152,1,-1,"STD compressor Qty"},
-//{0x00,3,152,1,-1,"Fan Data Qty"},
+{0x00,3,152,1,-1,"Fan Data Qty"},
 //{0x00,4,152,1,-1,"Expansion Valve Data Qty"},
 //{0x00,5,152,1,-1,"4 Way Valve Data Qty"},
-//{0x00,6,152,1,-1,"Crank Case Heater Qty"},
+{0x00,6,152,1,-1,"Crank Case Heater Qty"},
 //{0x00,7,152,1,-1,"Solenoid valve Qty"},
 //{0x00,8,152,1,-1,"Max. connectable indoor units"},
-//{0x00,9,152,1,-1,"Connected Indoor Unit Qty"},
-//{0x00,10,152,1,-1,"O/U MPU ID (xx)"},
-//{0x00,11,152,1,-1,"O/U MPU ID (yy)"},
-//{0x00,12,105,1,-1,"O/U capacity (kW)"},
-//{0x10,0,217,1,-1,"Operation Mode"},
-//{0x10,1,307,1,-1,"Thermostat ON/OFF"},
-//{0x10,1,306,1,-1,"Restart standby"},
-//{0x10,1,305,1,-1,"Startup Control"},
-//{0x10,1,304,1,-1,"Defrost Operation"},
-//{0x10,1,303,1,-1,"Oil Return Operation"},
-//{0x10,1,302,1,-1,"Pressure equalizing operation"},
-//{0x10,1,301,1,-1,"Demand Signal"},
-//{0x10,1,300,1,-1,"Low noise control"},
-//{0x10,4,203,1,-1,"Error type"},
-//{0x10,5,204,1,-1,"Error Code"},
-//{0x10,6,114,2,1,"Target Evap. Temp."},
-//{0x10,8,114,2,1,"Target Cond. Temp."},
-//{0x10,10,307,1,-1,"Discharge Temp. Drop"},
+{0x00,9,152,1,-1,"Connected Indoor Unit Qty"},
+{0x00,10,152,1,-1,"O/U MPU ID (xx)"},
+{0x00,11,152,1,-1,"O/U MPU ID (yy)"},
+{0x00,12,105,1,-1,"O/U capacity (kW)"},
+{0x10,0,217,1,-1,"Operation Mode"},
+{0x10,1,307,1,-1,"Thermostat ON/OFF"},
+{0x10,1,306,1,-1,"Restart standby"},
+{0x10,1,305,1,-1,"Startup Control"},
+{0x10,1,304,1,-1,"Defrost Operation"},
+{0x10,1,303,1,-1,"Oil Return Operation"},
+{0x10,1,302,1,-1,"Pressure equalizing operation"},
+{0x10,1,301,1,-1,"Demand Signal"},
+{0x10,1,300,1,-1,"Low noise control"},
+{0x10,4,203,1,-1,"Error type"},
+{0x10,5,204,1,-1,"Error Code"},
+{0x10,6,114,2,1,"Target Evap. Temp."},
+{0x10,8,114,2,1,"Target Cond. Temp."},
+{0x10,10,307,1,-1,"Discharge Temp. Drop"},
 //{0x10,10,310,1,-1,"Discharge Temp. Protection Retry Qty"},
-//{0x10,10,303,1,-1,"Comp. INV Current Drop"},
+{0x10,10,303,1,-1,"Comp. INV Current Drop"},
 //{0x10,10,311,1,-1,"Comp. INV Current Protection Retry Qty"},
-//{0x10,11,307,1,-1,"HP Drop Control"},
+{0x10,11,307,1,-1,"HP Drop Control"},
 //{0x10,11,310,1,-1,"HP Protection Retry Qty"},
-//{0x10,11,303,1,-1,"LP Drop Control"},
+{0x10,11,303,1,-1,"LP Drop Control"},
 //{0x10,11,311,1,-1,"LP Protection Retry Qty"},
-//{0x10,12,307,1,-1,"Fin Temp. Drop Control"},
+{0x10,12,307,1,-1,"Fin Temp. Drop Control"},
 //{0x10,12,310,1,-1,"Fin Temp. Protection Retry Qty"},
-//{0x10,12,303,1,-1,"Other Drop Control"},
+{0x10,12,303,1,-1,"Other Drop Control"},
 //{0x10,12,311,1,-1,"Not in use"},
 //{0x11,0,215,1,-1,"O/U EEPROM (1st digit)"},
 //{0x11,1,215,1,-1,"O/U EEPROM (3rd 4th digit)"},
@@ -49,147 +49,150 @@ LabelDef labelDefs[] = {
 //{0x11,4,215,1,-1,"O/U EEPROM (10th digit)"},
 //{0x11,5,214,1,-1,"O/U EEPROM (11th digit)"},
 //{0x00,0,995,1,-1,"NextDataGrid"},
-//{0x20,0,105,2,1,"Outdoor air temp.(R1T)"},
-//{0x20,2,105,2,1,"O/U Heat Exch. Temp.(R4T)"},
-//{0x20,4,105,2,1,"Discharge pipe temp.(R2T)"},
-//{0x20,6,105,2,1,"Suction pipe temp.(R3T)"},
-//{0x20,8,105,2,1,"Heat exchanger mid-temp.(R5T)"},
-//{0x20,10,105,2,1,"Liquid pipe temp.(R6T)"},
-//{0x20,12,105,2,2,"High Pressure"},
+{0x20,0,105,2,1,"Outdoor air temp.(R1T)"},
+{0x20,2,105,2,1,"O/U Heat Exch. Temp.(R4T)"},
+{0x20,4,105,2,1,"Discharge pipe temp.(R2T)"},
+{0x20,6,105,2,1,"Suction pipe temp.(R3T)"},
+{0x20,8,105,2,1,"Heat exchanger mid-temp.(R5T)"},
+{0x20,10,105,2,1,"Liquid pipe temp.(R6T)"},
+{0x20,12,105,2,2,"High Pressure"},
 //{0x20,12,405,2,1,"High Pressure(T)"},
-//{0x20,14,105,2,2,"Low Pressure"},
+{0x20,14,105,2,2,"Low Pressure"},
 //{0x20,14,405,2,1,"Low Pressure(T)"},
-//{0x21,0,105,2,-1,"INV primary current (A)"},
-//{0x21,2,105,2,-1,"INV secondary current (A)"},
-//{0x21,4,105,2,1,"INV fin temp."},
-//{0x21,6,105,2,1,"Fan1 Fin temp."},
-//{0x21,8,105,2,1,"Fan2 Fin temp."},
-//{0x21,10,105,2,1,"Compressor outlet temperature"},
+{0x21,0,105,2,-1,"INV primary current (A)"},
+{0x21,2,105,2,-1,"INV secondary current (A)"},
+{0x21,2,101,2,-1,"Voltage (N-phase) (V)"},
+{0x21,4,101,2,-1,"Voltage (V)"},
+{0x21,4,105,2,1,"INV fin temp."},
+{0x21,6,105,2,1,"Fan1 Fin temp."},
+{0x21,8,105,2,1,"Fan2 Fin temp."},
+{0x21,10,105,2,1,"Compressor outlet temperature"},
 //{0x00,0,995,1,-1,"NextDataGrid"},
-//{0x30,0,152,1,-1,"INV frequency (rps)"},
-//{0x30,1,211,1,-1,"Fan 1 (step)"},
-//{0x30,2,211,1,-1,"Fan 2 (step)"},
-//{0x30,3,151,2,-1,"Expansion valve 1 (pls)"},
-//{0x30,5,151,2,-1,"Expansion valve 2 (pls)"},
-//{0x30,7,151,2,-1,"Expansion valve 3 (pls)"},
-//{0x30,9,151,2,-1,"Expansion valve 4 (pls)"},
-//{0x30,11,307,1,-1,"4 Way Valve"},
-//{0x30,12,307,1,-1,"Crank case heater"},
-//{0x30,13,307,1,-1,"Hot gas bypass valve (Y3S)"},
-//{0x30,13,306,1,-1,"LP bypass valve (Y2S)"},
-//{0x30,13,305,1,-1,"Y3S"},
+{0x30,0,152,1,-1,"INV frequency (rps)"},
+{0x30,0,211,1,-1,"Fan 1 (10 rpm)"},
+{0x30,1,211,1,-1,"Fan 1 (step)"},
+{0x30,2,211,1,-1,"Fan 2 (step)"},
+{0x30,3,151,2,-1,"Expansion valve 1 (pls)"},
+{0x30,5,151,2,-1,"Expansion valve 2 (pls)"},
+{0x30,7,151,2,-1,"Expansion valve 3 (pls)"},
+{0x30,9,151,2,-1,"Expansion valve 4 (pls)"},
+{0x30,11,307,1,-1,"4 Way Valve"},
+{0x30,12,307,1,-1,"Crank case heater"},
+{0x30,13,307,1,-1,"Hot gas bypass valve (Y3S)"},
+{0x30,13,306,1,-1,"LP bypass valve (Y2S)"},
+{0x30,13,305,1,-1,"Y3S"},
 //{0x00,0,998,1,-1,"In-Out separator"},
-//{0xA0,0,119,2,1,"Suction temp"},
-//{0xA0,2,119,2,1,"Outdoor heat exchanger temp."},
-//{0xA0,4,119,2,1,"Liquid pipe temp."},
-//{0xA0,6,119,2,2,"Pressure"},
-//{0xA0,8,151,2,-1,"Expansion valve 3 (pls)"},
-//{0xA0,10,152,1,-1,"O/U MPU ID"},
-//{0xA0,11,152,1,-1,"O/U MPU ID"},
-//{0xA0,12,307,1,-1,"HPS operation"},
-//{0xA0,12,306,1,-1,"Safeguard operation"},
-//{0xA0,12,305,1,-1,"Crank case heater"},
+{0xA0,0,119,2,1,"Suction temp"},
+{0xA0,2,119,2,1,"Outdoor heat exchanger temp."},
+{0xA0,4,119,2,1,"Liquid pipe temp."},
+{0xA0,6,119,2,2,"Pressure"},
+{0xA0,8,151,2,-1,"Expansion valve 3 (pls)"},
+{0xA0,10,152,1,-1,"O/U MPU ID"},
+{0xA0,11,152,1,-1,"O/U MPU ID"},
+{0xA0,12,307,1,-1,"HPS operation"},
+{0xA0,12,306,1,-1,"Safeguard operation"},
+{0xA0,12,305,1,-1,"Crank case heater"},
 //{0xA0,12,304,1,-1,"Solenoid Valve 3"},
 //{0xA0,12,303,1,-1,"Solenoid Valve 2"},
 //{0xA0,12,302,1,-1,"Solenoid Valve 1"},
-//{0xA0,12,301,1,-1,"4 way valve (Y1S)"},
-//{0xA0,12,300,1,-1,"52C Output"},
-//{0xA0,13,303,1,-1,"Discharge Temp. Drop"},
-//{0xA0,13,302,1,-1,"During emergency operation"},
-//{0xA0,13,301,1,-1,"Indoor unit blowout 50 ° C flag"},
-//{0xA0,13,300,1,-1,"Powerful bit (MT setting bit)"},
-//{0xA0,14,105,2,1,"Compressor port temperature"},
-//{0xA1,0,119,2,1,"(Raw data)Water heat exchanger inlet temp."},
-//{0xA1,2,119,2,1,"(Raw data)Water heat exchanger outlet temp."},
-//{0xA1,4,302,1,-1,"Liquid INJ solenoid valve (Y4S)"},
-//{0xA1,4,301,1,-1,"Bottom Plate Heater"},
-//{0xA1,4,300,1,-1,"PHE Heater"},
-//{0xA1,5,114,2,1,"Target Discharge Temp."},
-//{0xA1,7,114,2,1,"Target port temperature"},
-//{0xA1,9,305,1,-1,"Monobloc setting"},
-//{0xA1,9,304,1,-1,"Minichiller setting"},
-//{0xA1,9,303,1,-1,"MT setting"},
+{0xA0,12,301,1,-1,"4 way valve (Y1S)"},
+{0xA0,12,300,1,-1,"52C Output"},
+{0xA0,13,303,1,-1,"Discharge Temp. Drop"},
+{0xA0,13,302,1,-1,"During emergency operation"},
+{0xA0,13,301,1,-1,"Indoor unit blowout 50 ° C flag"},
+{0xA0,13,300,1,-1,"Powerful bit (MT setting bit)"},
+{0xA0,14,105,2,1,"Compressor port temperature"},
+{0xA1,0,119,2,1,"(Raw data)Water heat exchanger inlet temp."},
+{0xA1,2,119,2,1,"(Raw data)Water heat exchanger outlet temp."},
+{0xA1,4,302,1,-1,"Liquid INJ solenoid valve (Y4S)"},
+{0xA1,4,301,1,-1,"Bottom Plate Heater"},
+{0xA1,4,300,1,-1,"PHE Heater"},
+{0xA1,5,114,2,1,"Target Discharge Temp."},
+{0xA1,7,114,2,1,"Target port temperature"},
+{0xA1,9,305,1,-1,"Monobloc setting"},
+{0xA1,9,304,1,-1,"Minichiller setting"},
+{0xA1,9,303,1,-1,"MT setting"},
 //{0xA1,9,302,1,-1,"GSHP setting"},
 //{0xA1,9,301,1,-1,"Hydro split setting"},
-//{0xA1,9,300,1,-1,"Alterma LT setting"},
-//{0x60,0,304,1,-1,"Data Enable/Disable"},
-//{0x60,1,152,1,-1,"Indoor Unit Address"},
-//{0x60,2,315,1,-1,"I/U operation mode"},
-//{0x60,2,303,1,-1,"Thermostat ON/OFF"},
-//{0x60,2,302,1,-1,"Freeze Protection"},
-//{0x60,2,301,1,-1,"Silent Mode"},
-//{0x60,2,300,1,-1,"Freeze Protection for water piping"},
-//{0x60,3,204,1,-1,"Error Code"},
-//{0x60,4,152,1,-1,"Error detailed code"},
-//{0x60,5,203,1,-1,"Error type"},
+{0xA1,9,300,1,-1,"Altherma LT setting"},
+{0x60,0,304,1,-1,"Data Enable/Disable"},
+{0x60,1,152,1,-1,"Indoor Unit Address"},
+{0x60,2,315,1,-1,"I/U operation mode"},
+{0x60,2,303,1,-1,"Thermostat ON/OFF"},
+{0x60,2,302,1,-1,"Freeze Protection"},
+{0x60,2,301,1,-1,"Silent Mode"},
+{0x60,2,300,1,-1,"Freeze Protection for water piping"},
+{0x60,3,204,1,-1,"Error Code"},
+{0x60,4,152,1,-1,"Error detailed code"},
+{0x60,5,203,1,-1,"Error type"},
 //{0x60,6,219,1,-1,"I/U capacity code"},
-//{0x60,7,105,2,1,"DHW setpoint"},
-//{0x60,9,105,2,1,"LW setpoint (main)"},
-//{0x60,11,307,1,-1,"Water flow switch"},
-//{0x60,11,306,1,-1,"Thermal protector (Q1L) BUH"},
-//{0x60,11,305,1,-1,"Thermal protector BSH"},
+{0x60,7,105,2,1,"DHW setpoint"},
+{0x60,9,105,2,1,"LW setpoint (main)"},
+{0x60,11,307,1,-1,"Water flow switch"},
+{0x60,11,306,1,-1,"Thermal protector (Q1L) BUH"},
+{0x60,11,305,1,-1,"Thermal protector BSH"},
 //{0x60,11,304,1,-1,"Benefit kWh rate power supply"},
 //{0x60,11,303,1,-1,"Solar input"},
 //{0x60,11,302,1,-1,"Not in use"},
 //{0x60,11,301,1,-1,"Not in use"},
 //{0x60,11,300,1,-1,"Bivalent Operation"},
 //{0x60,12,307,1,-1,"2way valve(On:Heat_Off:Cool)"},
-//{0x60,12,306,1,-1,"3way valve(On:DHW_Off:Space)"},
-//{0x60,12,305,1,-1,"BSH"},
-//{0x60,12,304,1,-1,"BUH Step1"},
-//{0x60,12,303,1,-1,"BUH Step2"},
+{0x60,12,306,1,-1,"3way valve(On:DHW_Off:Space)"},
+{0x60,12,305,1,-1,"BSH"},
+{0x60,12,304,1,-1,"BUH Step1"},
+{0x60,12,303,1,-1,"BUH Step2"},
 //{0x60,12,302,1,-1,"Floor loop shut off valve"},
-//{0x60,12,301,1,-1,"Water pump operation"},
+{0x60,12,301,1,-1,"Water pump operation"},
 //{0x60,12,300,1,-1,"Solar pump operation"},
-//{0x60,13,152,1,-1,"Indoor Option Code"},
+{0x60,13,152,1,-1,"Indoor Option Code"},
 //{0x60,15,215,1,-1,"I/U Software ID (xx)"},
 //{0x60,14,215,1,-1,"I/U Software ID (yy)"},
 //{0x60,16,152,1,-1,"I/U EEPROM Ver."},
-//{0x61,0,307,1,-1,"Data Enable/Disable"},
-//{0x61,1,152,1,-1,"Indoor Unit Address"},
-//{0x61,2,105,2,1,"Leaving water temp. before BUH (R1T)"},
-//{0x61,4,105,2,1,"Leaving water temp. after BUH (R2T)"},
-//{0x61,6,105,2,1,"Refrig. Temp. liquid side (R3T)"},
-//{0x61,8,105,2,1,"Inlet water temp.(R4T)"},
-//{0x61,10,105,2,1,"DHW tank temp. (R5T)"},
-//{0x61,12,105,2,1,"Indoor ambient temp. (R1T)"},
-//{0x61,14,105,2,1,"Ext. indoor ambient sensor (R6T)"},
-//{0x62,0,307,1,-1,"Data Enable/Disable"},
-//{0x62,1,152,1,-1,"Indoor Unit Address"},
-//{0x62,2,307,1,-1,"Reheat ON/OFF"},
-//{0x62,2,306,1,-1,"Storage eco ON/OFF"},
-//{0x62,2,305,1,-1,"Storage comfort ON/OFF"},
-//{0x62,2,304,1,-1,"Powerful DHW Operation. ON/OFF"},
-//{0x62,2,303,1,-1,"Space heating Operation ON/OFF"},
-//{0x62,2,302,1,-1,"System OFF (ON:System off)"},
+{0x61,0,307,1,-1,"Data Enable/Disable"},
+{0x61,1,152,1,-1,"Indoor Unit Address"},
+{0x61,2,105,2,1,"Leaving water temp. before BUH (R1T)"},
+{0x61,4,105,2,1,"Leaving water temp. after BUH (R2T)"},
+{0x61,6,105,2,1,"Refrig. Temp. liquid side (R3T)"},
+{0x61,8,105,2,1,"Inlet water temp.(R4T)"},
+{0x61,10,105,2,1,"DHW tank temp. (R5T)"},
+{0x61,12,105,2,1,"Indoor ambient temp. (R1T)"},
+{0x61,14,105,2,1,"Ext. indoor ambient sensor (R6T)"},
+{0x62,0,307,1,-1,"Data Enable/Disable"},
+{0x62,1,152,1,-1,"Indoor Unit Address"},
+{0x62,2,307,1,-1,"Reheat ON/OFF"},
+{0x62,2,306,1,-1,"Storage eco ON/OFF"},
+{0x62,2,305,1,-1,"Storage comfort ON/OFF"},
+{0x62,2,304,1,-1,"Powerful DHW Operation. ON/OFF"},
+{0x62,2,303,1,-1,"Space heating Operation ON/OFF"},
+{0x62,2,302,1,-1,"System OFF (ON:System off)"},
 //{0x62,2,301,1,-1,"Not in use"},
-//{0x62,2,300,1,-1,"Emergency (indoor) active/not active"},
-//{0x62,3,105,2,1,"LW setpoint (add)"},
-//{0x62,5,105,2,1,"RT setpoint"},
-//{0x62,7,307,1,-1,"Add. Ext. RT Input Cool."},
-//{0x62,7,306,1,-1,"Add. Ext. RT Input Heat."},
+{0x62,2,300,1,-1,"Emergency (indoor) active/not active"},
+{0x62,3,105,2,1,"LW setpoint (add)"},
+{0x62,5,105,2,1,"RT setpoint"},
+{0x62,7,307,1,-1,"Add. Ext. RT Input Cool."},
+{0x62,7,306,1,-1,"Add. Ext. RT Input Heat."},
 //{0x62,7,305,1,-1,"Main RT Cooling"},
 //{0x62,7,304,1,-1,"Main RT Heating"},
-//{0x62,7,303,1,-1,"Pwr consumption limit 4"},
-//{0x62,7,302,1,-1,"Pwr consumption limit 3"},
-//{0x62,7,301,1,-1,"Pwr consumption limit 2"},
-//{0x62,7,300,1,-1,"Pwr consumption limit 1"},
+{0x62,7,303,1,-1,"Pwr consumption limit 4"},
+{0x62,7,302,1,-1,"Pwr consumption limit 3"},
+{0x62,7,301,1,-1,"Pwr consumption limit 2"},
+{0x62,7,300,1,-1,"Pwr consumption limit 1"},
 //{0x62,8,307,1,-1,"None"},
 //{0x62,8,306,1,-1,"Not in use"},
 //{0x62,8,305,1,-1,"Not in use"},
-//{0x62,8,304,1,-1,"PHE Heater"},
-//{0x62,8,303,1,-1,"Tank preheat ON/OFF"},
-//{0x62,8,302,1,-1,"Circulation pump operation"},
-//{0x62,8,301,1,-1,"Alarm output"},
-//{0x62,8,300,1,-1,"Space H Operation output"},
-//{0x62,9,105,2,-1,"Flow sensor (l/min)"},
-//{0x62,11,105,1,2,"Water pressure"},
-//{0x62,12,152,1,-1,"Water pump signal (0:max-100:stop)"},
+{0x62,8,304,1,-1,"PHE Heater"},
+{0x62,8,303,1,-1,"Tank preheat ON/OFF"},
+{0x62,8,302,1,-1,"Circulation pump operation"},
+{0x62,8,301,1,-1,"Alarm output"},
+{0x62,8,300,1,-1,"Space H Operation output"},
+{0x62,9,105,2,-1,"Flow sensor (l/min)"},
+{0x62,11,105,1,2,"Water pressure"},
+{0x62,12,152,1,-1,"Water pump signal (0:max-100:stop)"},
 //{0x62,13,152,1,-1,"[Future] 3 way Valve Mixing 1"},
 //{0x62,14,152,1,-1,"[Future] 3 way Valve Mixing 2"},
-//{0x62,15,105,2,2,"Refrigerant pressure sensor"},
-//{0x63,0,307,1,-1,"Data Enable/Disable"},
-//{0x63,1,152,1,-1,"Indoor Unit Address"},
+{0x62,15,105,2,2,"Refrigerant pressure sensor"},
+{0x63,0,307,1,-1,"Data Enable/Disable"},
+{0x63,1,152,1,-1,"Indoor Unit Address"},
 //{0x63,2,215,1,-1,"I/U EEPROM (3rd digit)"},
 //{0x63,3,215,1,-1,"I/U EEPROM (4th 5th digit)"},
 //{0x63,4,215,1,-1,"I/U EEPROM (6th 7th digit)"},
@@ -204,21 +207,21 @@ LabelDef labelDefs[] = {
 //{0x63,13,311,1,-1,"BUH output capacity"},
 //{0x63,14,161,1,-1,"Current measured by CT sensor of L1"},
 //{0x63,15,161,1,-1,"Current measured by CT sensor of L2"},
-//{0x63,16,307,1,-1,"HP Forced FG"},
+{0x63,16,307,1,-1,"HP Forced FG"},
 //{0x63,16,161,1,-1,"Current measured by CT sensor of L3"},
-//{0x64,0,307,1,-1,"Data Enable/Disable"},
-//{0x64,1,152,1,-1,"Indoor Unit Address"},
+{0x64,0,307,1,-1,"Data Enable/Disable"},
+{0x64,1,152,1,-1,"Indoor Unit Address"},
 //{0x64,2,316,1,-1,"Hybrid Op. Mode"},
 //{0x64,2,303,1,-1,"Boiler Operation Demand"},
 //{0x64,2,302,1,-1,"Boiler DHW Demand"},
 //{0x64,2,301,1,-1,"Bypass Valve Output"},
-//{0x64,3,105,2,-1,"BE_COP"},
+{0x64,3,105,2,-1,"BE_COP"},
 //{0x64,5,105,2,1,"Hybrid Heating Target Temp."},
 //{0x64,7,105,2,1,"Boiler Heating Target Temp."},
-//{0x64,9,302,1,-1,"Add pump"},
-//{0x64,9,301,1,-1,"Main pump"},
+{0x64,9,302,1,-1,"Add pump"},
+{0x64,9,301,1,-1,"Main pump"},
 //{0x64,10,105,2,1,"Mixed water temp."},
 //{0x64,12,105,2,1,"2nd Domestic hot water temperature"},
-//{0x64,14,152,1,1,"Target delta T heating"},
+{0x64,14,152,1,1,"Target delta T heating"},
 //{0x64,15,152,1,1,"Target delta T cooling"},
-};
+};
\ No newline at end of file