Skip to content

Latest commit

 

History

History
489 lines (387 loc) · 19.6 KB

README.md

File metadata and controls

489 lines (387 loc) · 19.6 KB
Raw

ClamAV in Docker

ClamAV can be run within a Docker container. This provides isolation from other processes by running it in a containerized environment. If new or unfamiliar with Docker, containers or cgroups see docker.com.

The official images on Docker Hub

ClamAV image tags on Docker Hub follow this naming convention:

  • clamav/clamav:<version>: A release preloaded with signature databases.

    Using this container will save the ClamAV project some bandwidth. Use this if you will keep the image around so that you don't download the entire database set every time you start a new container. Updating with FreshClam from existing databases set does not use much data.

  • clamav/clamav:<version>_base: A release with no signature databases.

    Use this container only if you mount a volume in your container under /var/lib/clamav to persist your signature database databases. This method is the best option because it will reduce data costs for ClamAV and for the Docker registry, but it does require advanced familiarity with Linux and Docker.

    Caution: Using this image without mounting an existing database directory will cause FreshClam to download the entire database set each time you start a new container.

The <version> may be one of three things:

  1. A feature version in the form X.Y.

    For example: 0.105 points to the latest revision of the latest image for the ClamAV 0.105 feature release.

    Docker image tags for feature versions will be updated to the latest revision of the latest patch version image.

    Tip: Selecting the ClamAV image tag by feature version is the best option for stability and security.

  2. A patch version in the form X.Y.Z.

    For example: 0.105.1 represents the latest revision of the 0.105.1 image.

    Docker image tags for the most recent patch version will be updated to the latest image revision.

    Note: Once a newer patch version exists, the tag for the previous patch version will no longer be updated for security issues in the base image.

  3. A patch version plus build revision in the form X.Y.Z-R.

    For example 0.105.1-3 represents the third revision of the 0.105.1 image.

    New revisions are created to fix problems with Docker-specific features, and to patch security issues found in the base image.

    Once built, an image tag with a -R suffix will never be updated.

    Important: You should never select a tag with a -R suffix for use in production, but it may be useful for historical reference.

You can use the unstable version (i.e. clamav/clamav:unstable or clamav/clamav:unstable_base) to try the latest from our development branch.

Building the ClamAV image

While it is recommended to pull the image from our Docker Hub registry, some may want to build the image locally instead. All that is needed is:

docker build --tag "clamav:TICKET-123" .

in the current directory. This will build the ClamAV image and tag it with the name "clamav:TICKET-123". Any name can generally be used and it is this name that needs to be referred to later when running the image.

Running ClamD

To run clamd in a Docker container, first, an image either has to be built or pulled from a Docker registry.

Running ClamD using the official ClamAV images from Docker Hub

To pull the ClamAV "unstable" image from Docker Hub, run:

docker pull clamav/clamav:unstable

Tip: Substitute unstable with a different version as needed.

To pull and run the official ClamAV images from the Docker Hub registry, try the following command:

docker run \
    --interactive \
    --tty \
    --rm \
    --name "clam_container_01" \
    clamav/clamav:unstable

The above creates an interactive container with the current TTY connected to it. This is optional but useful when getting started as it allows one to directly see the output and, in the case of clamd, send ctrl-c to close the container. The --rm parameter ensures the container is cleaned up again after it exits and the --name parameter names the container, so it can be referenced through other (Docker) commands, as several containers of the same image can be started without conflicts.

Note: Pulling is not always required. docker run will pull the image if it cannot be found locally. docker run --pull always will always pull beforehand to ensure the most up-to-date container is being used. Do not use --pull always with the larger ClamAV images.

Tip: It's common to see -it instead of --interactive --tty.

In some situations it may be desirable to set (any of) the containers to a specific timezone. The --env parameter can be used to set the TZ variable to change the default of Etc/UTC.

Running ClamD using a Locally Built Image

You can run a container using an image built locally (see "Building the ClamAV Image"). Just run:

docker run -it --rm \
    --name "clam_container_01" \
    clamav:TICKET-123

Persisting the virus database (volume)

The virus database in /var/lib/clamav is by default unique to each container and thus is normally not shared. For simple setups this is fine, where only one instance of clamd is expected to run in a dockerized environment. However some use cases may want to efficiently share the database or at least persist it across short-lived ClamAV containers.

To do so, you have two options:

  1. Create a Docker volume using the docker volume command. Volumes are completely managed by Docker and are the best choice for creating a persistent database volume.

    For example, create a "clam_db" volume:

    docker volume create clam_db

    Then start one or more containers using this volume. The first container to use a new database volume will download the full database set. Subsequent containers will use the existing databases and may update them as needed:

    docker run -it --rm \
    --name "clam_container_01" \
    --mount source=clam_db,target=/var/lib/clamav \
    clamav/clamav:unstable_base

  2. Create a Bind Mount that maps a file system directory to a path within the container. Bind Mounts depend on the directory structure, permissions, and operating system of the Docker host machine.

    Run the container with these arguments to mount the a directory from your host environment as a volume in the container.

        --mount type=bind,source=/path/to/databases,target=/var/lib/clamav

    When doing this, it's best to use the <version>_base image tags so as to save on bandwith. E.g.:

    docker run -it --rm \
    --name "clam_container_01" \
    --mount type=bind,source=/path/to/databases,target=/var/lib/clamav \
    clamav/clamav:unstable_base

    Disclaimer: When using a Bind Mount, the container's entrypoint script will change ownership of this directory to its "clamav" user. This enables FreshClam and ClamD with the required permissions to read and write to the directory, though these changes will also affect those files on the host.

If you're thinking about running multiple containers that share a single database volume, here are some notes on how this might work.

Running Clam(D)Scan

Scanning files using clamscan or clamdscan is possible in various ways with Docker. This section briefly describes them, but the other sections of this document are best read before hand to better understand some of the concepts.

One important aspect is however to realize that Docker by default does not have access to any of the hosts files. And so to scan these within Docker, they need to be mounted with a bind mount to be made accessible.

For example, running the container with these arguments ...

    --mount type=bind,source=/path/to/scan,target=/scandir
    --mount type=bind,source=/path/to/scan,target=/scandir

... would make the hosts file/directory /path/to/scan available in the container as /scandir and thus invoking clamscan would thus be done on /scandir.

Note that while technically possible to run either scanners via docker exec this is not described as it is unlikely the container has access to the files to be scanned.

ClamScan

Using clamscan outside of the Docker container is how normally clamscan is invoked. To make use of the available shared dockerized resources however, it is possible to expose the virus database and share that for example. E.g. it could be possible to run a Docker container with only the freshclam daemon running, and share the virus database directory /var/lib/clamav. This could be useful for file servers for example, where only clamscan is installed on the host, and freshclam is managed in a Docker container.

Note: Running the freshclam daemon separated from clamd is less recommended, unless the clamd socket is shared with freshclam as freshclam would not be able to inform clamd of database updates.

Dockerized ClamScan

To run clamscan in a Docker container, the Docker container can be invoked as:

docker run -it --rm \
    --mount type=bind,source=/path/to/scan,target=/scandir \
    clamav/clamav:unstable \
    clamscan /scandir

However, this will use whatever signatures are found in the image, which may be slightly out of date. If using clamscan in this way, it would be best to use a database volume that is up-to-date so that you scan with the latest signatures. E.g.:

docker run -it --rm \
    --mount type=bind,source=/path/to/scan,target=/scandir \
    --mount type=bind,source=/path/to/databases,target=/var/lib/clamav \
    clamav/clamav:unstable_base \
    clamscan /scandir

ClamDScan

As with clamscan, clamdscan can also be run when installed on the host, by connecting to the dockerized clamd. This can be done by either pointing clamdscan to the exposed TCP/UDP port or unix socket.

Dockerized ClamDScan

Running both clamd and clamdscan is also easily possible, as all that is needed is the shared socket between the two containers. The only cavaet here is to:

  1. mount the files to be scanned in the container that will run clamd, or
  2. mount the files to be scanned in the container that will clamdscan run if using clamdscan --stream. The --stream option will be slower, but enables submitting files from a different machine on a network.

For example:

docker run -it --rm \
    --mount type=bind,source=/path/to/scan,target=/scandir \
    --mount type=bind,source=/var/lib/docker/data/clamav/sockets/,target=/run/clamav/
    clamav/clamav:unstable
docker run -it --rm \
    --mount type=bind,source=/path/to/scan,target=/scandir \
    --mount type=bind,source=/var/lib/docker/data/clamav/sockets/,target=/run/clamav/
    clamav/clamav:unstable_base \
    clamdscan /scandir

Controlling the container

The ClamAV container actually runs both freshclam and clamd daemons by default. Optionally available to the container is ClamAV's milter daemon. To control the behavior of the services started within the container, the following flags can be passed to the docker run command with the --env (-e) parameter.

  • CLAMAV_NO_CLAMD [true|false] Do not start clamd. (default: start clamd)
  • CLAMAV_NO_FRESHCLAMD [true|false] Do not start the freshclam daemon. (default: start the freshclam daemon)
  • CLAMAV_NO_MILTERD [true|false] Do not start the clamav-milter daemon. (default: start the clamav-milter daemon )
  • CLAMD_STARTUP_TIMEOUT [integer] Seconds to wait for clamd to start. (default: 1800)
  • FRESHCLAM_CHECKS [integer] freshclam daily update frequency. (default: once per day)

So to additionally also enable clamav-milter, the following flag can be added:

    --env 'CLAMAV_NO_MILTERD=false'

Further more, all of the configuration files that live in /etc/clamav can be overridden by doing a volume-mount to the specific file. The following argument can be added for this purpose. The example uses the entire configuration directory, but this can be supplied multiple times if individual files deem to be replaced.

    --mount type=bind,source=/full/path/to/clamav/,target/etc/clamav

Note: Even when disabling the freshclam daemon, freshclam will always run at least once during container startup if there is no virus database. While not recommended, the virus database location itself /var/lib/clamav/ could be a persistent Docker volume. This however is slightly more advanced and out of scope of this document.

Connecting to the container

Executing commands within a running container

To connect to a running ClamAV container, docker exec can be used to run a command on an already running container. To do so, the name needs to be either obtained from docker ps or supplied during container start via the --name parameter. The most interesting command in this case can be clamdtop.

docker exec --interactive --tty "clamav_container_01" clamdtop

Alternatively, a shell can be started to inspect and run commands within the container as well.

docker exec --interactive --tty "clamav_container_01" /bin/sh

Unix sockets

The default socket for clamd is located inside the container as /run/clamav/clamd.sock and can be connected to when exposed via a Docker volume mount. To ensure, that clamd within the container can freely create and remove the socket, the path for the socket is to be volume-mounted, to expose it for others on the same host to use. The following volume can be used for this purpose. Do ensure that the directory on the host actually exists and clamav inside the container has permission to access it. Caution is required when managing permissions, as incorrect permission could open clamd for anyone on the host system.

    --mount type=bind,source=/var/lib/docker/data/clamav/sockets/,target=/run/clamav/

With the socket exposed to the host, any other service can now talk to clamd as well. If for example clamdtop where installed on the local host, calling

clamdtop "/var/lib/docker/data/clamav/sockets/clamd.sock"

should work just fine. Likewise, running clamdtop in a different container, but sharing the socket will equally work. While clamdtop works well as an example here, it is of course important to realize, this can also be used to connect a mail server to clamd.

TCP

ClamAV in the official Docker images is configured to listen for TCP connections on these ports:

  • clamd: 3310
  • clamav-milter: 7357

While clamd and clamav-milter will listen on the above TCP ports, Docker does not expose these by default to the host. Only within containers can these ports be accessed. To expose, or "publish", these ports to the host, and thus potentially over the (inter)network, the --publish (or --publish-all) flag to docker run can be used. While more advanced/secure mappings can be done as per documentation, the basic way is to --publish [<host_port>:]<container_port> to make the port available to the host.

    --publish 73310:3310 \
    --publish 7357

The above would thus publish the milter port 3310 as 73310 on the host and the clamd port 7357 as a random to the host. The random port can be inspected via docker ps.

Warning: Extreme caution is to be taken when using clamd over TCP as there are no protections on that level. All traffic is un-encrypted. Extra care is to be taken when using TCP communications.

Container ClamD health-check

Docker has the ability to run simple ping checks on services running inside containers. If clamd is running inside the container, Docker will on occasion send a ping to clamd on the default port and wait for the pong from clamd. If clamd fails to respond, Docker will treat this as an error. The healthcheck results can be viewed with docker inspect.

When the container starts up, the health-check also starts up. As loading the virus database can take some time, there is a delay configured in the Dockerfile to try and avoid this race condition.

Performance

The performance impact of running clamd in Docker is negligible. Docker is in essence just a wrapper around Linux's cgroups and cgroups can be thought of as chroot or FreeBSD's jail. All code is executed on the host without any translation. Docker does however do some isolation (through cgroups) to isolate the various systems somewhat.

Of course, nothing in life is free, and so there is some overhead. Disk-space being the most prominent one. The Docker container might have some duplication of files for example between the host and the container. Further more, also RAM memory may be duplicated for each instance, as there is no RAM-deduplication. Both of which can be solved on the host however. A filesystem that supports disk-deduplication and a memory manager that does RAM-deduplication.

The base container in itself is already very small ~16 MiB, at the time of this writing, this cost is still very tiny, where the advantages are very much worth the cost in general.

The container including the virus database is about ~240 MiB at the time of this writing.

Bandwidth

Please, be kind when using 'free' bandwidth, both for the virus databases but also the Docker registry. Try not to download the entire database set or the larger ClamAV database images on a regular basis.

Advanced container configurations

Multiple containers sharing the same mounted databases

You can run multiple containers that share the same database volume, but be aware that the FreshClam daemons on each would compete to update the databases. Most likely, one would update the databases and trigger its ClamD to load the new databases, while the others would be oblivious to the new databases and would continue with the old signatures until the next ClamD self-check.

This is fine, honestly. It won't take that long before the new signatures are detected by ClamD's self-check and the databases are reloaded automatically.

To reload the databases on all ClamD containers immediately after an update, you could disable the FreshClam daemon when you start the containers. Later, use docker exec to perform an update and again as needed to have ClamD load updated databases.

Note: This really isn't necessary but you could do this if you wish.

Exactly how you orchestrate this will depend on your environment. You might do something along these lines:

  1. Create a "clam_db" volume, if you don't already have one:

    docker volume create clam_db

  2. Start your containers:

    docker run -it --rm \
    --name "clam_container_01" \
    --mount source=clam_db,target=/var/lib/clamav \
    --env 'CLAMAV_NO_FRESHCLAMD=true' \
    clamav/clamav:unstable_base

    Wait for the first one to download the databases (if it's a new database volume). Then start more:

    docker run -it --rm \
    --name "clam_container_02" \
    --mount source=clam_db,target=/var/lib/clamav \
    --env 'CLAMAV_NO_FRESHCLAMD=true' \
    clamav/clamav:unstable_base

  3. Check for updates, as needed:

    docker exec -it clam_container_01 freshclam --on-update-execute=EXIT_1 || \
if [ $? == 1 ]; then \
    docker exec -it clam_container_01 clamdscan --reload; \
    docker exec -it clam_container_02 clamdscan --reload; \
fi