QEMU ARM64

Docker container for running ARM-based virtual machines using QEMU, for devices like the Raspberry Pi 5 and many others.

Features ✨

• Web-based viewer to control the machine directly from your browser

• Supports .iso, .img, .qcow2, .vhd, .vhdx, .vdi, .vmdk and .raw disk formats

• High-performance options (like KVM acceleration, kernel-mode networking, IO threading, etc.) to achieve near-native speed

Usage 🐳

Via Docker Compose:

services:
  qemu:
    container_name: qemu
    image: qemux/qemu-arm
    environment:
      BOOT: "https://dl-cdn.alpinelinux.org/alpine/v3.19/releases/aarch64/alpine-virt-3.19.1-aarch64.iso"
    devices:
      - /dev/kvm
      - /dev/net/tun
    cap_add:
      - NET_ADMIN
    ports:
      - 8006:8006
    stop_grace_period: 2m

Via Docker CLI:

docker run -it --rm -e "BOOT=http://example.com/image.iso" -p 8006:8006 --device=/dev/kvm --device=/dev/net/tun --cap-add NET_ADMIN qemux/qemu-arm

Via Kubernetes:

kubectl apply -f https://raw.githubusercontent.com/qemus/qemu-arm/refs/heads/master/kubernetes.yml

Compatibility ⚙️

Product	Platform
Docker Engine	Linux	✅
Docker Desktop	Linux	❌
Docker Desktop	macOS	❌

FAQ 💬

How do I use it?

Very simple! These are the steps:

• Set the BOOT environment variable to the URL of any disk image you want to install.

• Start the container and connect to port 8006 using your web browser.

• You will see the screen and can now install the OS of your choice using your keyboard and mouse.

Enjoy your brand new machine, and don't forget to star this repo!

How do I change the storage location?

To change the storage location, include the following bind mount in your compose file:

volumes:
  - /var/qemu:/storage

Replace the example path /var/qemu with the desired storage folder.

How do I change the size of the disk?

To expand the default size of 16 GB, add the DISK_SIZE setting to your compose file and set it to your preferred capacity:

environment:
  DISK_SIZE: "128G"

Tip

This can also be used to resize the existing disk to a larger capacity without any data loss.

How do I increase the display resolution?

For maximum compatibility, the display output will be a simple framebuffer by default. While this isn't the most optimal, it doesn't require any drivers.

If your guest OS bundles the virtio-gpu driver (as most Linux distributions do), you can add the following to your compose file:

environment:
  VGA: "virtio-gpu"

to add a virtual graphics cards to your machine that allows for higher resolutions.

Note

Using this method your screen will stay black during the boot process, until the point where the driver is actually loaded.

How do I boot a local image?

You can use a local image file directly, and skip the download altogether, by binding it in your compose file:

volumes:
  - /home/user/example.iso:/boot.iso

This way you can supply a boot.iso, boot.img or boot.qcow2 file.

Note

The URL of the BOOT variable will be ignored in this case.

How do I boot Windows?

Use dockur/windows-arm instead, as it includes all the drivers required during installation, amongst many other features.

How do I boot a x86 image?

You can use qemu-docker to run x86 and x64 images on ARM.

How do I boot without SCSI drivers?

By default, the machine makes use of virtio-scsi drives for performance reasons, and even though most Linux kernels bundle the necessary driver for this device, that may not always be the case for other operating systems.

If your machine fails to detect the hard drive, you can modify your compose file to use virtio-blk instead:

environment:
  DISK_TYPE: "blk"

Tip

If it still fails to boot, you can set the value to usb to emulate a USB drive, which is slower but requires no drivers and is compatible with almost every system.

How do I change the amount of CPU or RAM?

By default, the container will be allowed to use a maximum of 1 CPU core and 1 GB of RAM.

If you want to adjust this, you can specify the desired amount using the following environment variables:

environment:
  RAM_SIZE: "4G"
  CPU_CORES: "4"

How do I verify if my system supports KVM?

Only Linux and Windows 11 support KVM virtualization, macOS and Windows 10 do not unfortunately.

You can run the following commands in Linux to check your system:

sudo apt install cpu-checker
sudo kvm-ok

If you receive an error from kvm-ok indicating that KVM cannot be used, please check whether:

• the virtualization extensions (Intel VT-x or AMD SVM) are enabled in your BIOS.

• you enabled "nested virtualization" if you are running the container inside a virtual machine.

• you are not using a cloud provider, as most of them do not allow nested virtualization for their VPS's.

If you do not receive any error from kvm-ok but the container still complains about KVM, please check whether:

• you are not using "Docker Desktop for Linux" as it does not support KVM, instead make use of Docker Engine directly.

• it could help to add privileged: true to your compose file (or sudo to your docker run command), to rule out any permission issue.

How do I assign an individual IP address to the container?

By default, the container uses bridge networking, which shares the IP address with the host.

If you want to assign an individual IP address to the container, you can create a macvlan network as follows:

docker network create -d macvlan \
    --subnet=192.168.0.0/24 \
    --gateway=192.168.0.1 \
    --ip-range=192.168.0.100/28 \
    -o parent=eth0 vlan

Be sure to modify these values to match your local subnet.

Once you have created the network, change your compose file to look as follows:

services:
  qemu:
    container_name: qemu
    ..<snip>..
    networks:
      vlan:
        ipv4_address: 192.168.0.100

networks:
  vlan:
    external: true

An added benefit of this approach is that you won't have to perform any port mapping anymore, since all ports will be exposed by default.

Important

This IP address won't be accessible from the Docker host due to the design of macvlan, which doesn't permit communication between the two. If this is a concern, you need to create a second macvlan as a workaround.

How can the VM acquire an IP address from my router?

After configuring the container for macvlan, it is possible for the VM to become part of your home network by requesting an IP from your router, just like a real PC.

To enable this mode, add the following lines to your compose file:

environment:
  DHCP: "Y"
devices:
  - /dev/vhost-net
device_cgroup_rules:
  - 'c *:* rwm'

Note

In this mode, the container and the VM will each have their own separate IPs.

How do I add multiple disks?

To create additional disks, modify your compose file like this:

environment:
  DISK2_SIZE: "32G"
  DISK3_SIZE: "64G"
volumes:
  - /home/example:/storage2
  - /mnt/data/example:/storage3

How do I pass-through a disk?

It is possible to pass-through disk devices directly by adding them to your compose file in this way:

devices:
  - /dev/sdb:/disk1
  - /dev/sdc:/disk2

Use /disk1 if you want it to become your main drive, and use /disk2 and higher to add them as secondary drives.

How do I pass-through a USB device?

To pass-through a USB device, first lookup its vendor and product id via the lsusb command, then add them to your compose file like this:

environment:
  ARGUMENTS: "-device usb-host,vendorid=0x1234,productid=0x1234"
devices:
  - /dev/bus/usb

How can I provide custom arguments to QEMU?

You can create the ARGUMENTS environment variable to provide additional arguments to QEMU at runtime:

environment:
  ARGUMENTS: "-device usb-tablet"

What image formats are supported?

The BOOT URL accepts files in any of the following formats:

Extension	Format
.img	Raw
.raw	Raw
.iso	Optical
.qcow2	QEMU
.vmdk	VMware
.vhd	VirtualPC
.vhdx	Hyper-V
.vdi	VirtualBox

Tip

It will also accept .img.gz, .qcow2.xz, .iso.zip and many more, as it automaticly extracts compressed files.

Stars 🌟