iperf3 is a network performance tool
Given that you followed instructions to deploy operator, you can modify cr.yaml
apiVersion: ripsaw.cloudbulldozer.io/v1alpha1
kind: Benchmark
metadata:
name: iperf3-benchmark
namespace: my-ripsaw
spec:
name: iperf3
args:
pairs: 1
hostnetwork: false
pin: true
pin_server: "master-0"
pin_client: "master-1"
port: 5201
transmit_type: time
transmit_value: 60
omit_start: 0
length_buffer: 128K
window_size: 64k
ip_tos: 0
mss: 900
streams: 1
extra_options_client: ' '
extra_options_server: ' '
#retries: 200Optional argument:
retries is an optional argument that can be used if you are running long tests
and don't want the logic to exit early, this is due to iperf logic using ansible's
retries to wait for iperf client job to be finish running. Note that the delay is
fixed to 15 seconds, and number of retries is defaulted to 10, i.e. a max of 150 seconds
for iperf client job to finish running. You can overwrite the number of retries by specifying
an integer value.
So for example: if you estimate a job to not take more than 900s,
then you'd probably give a retries of 60, as 60*15 is 900s.
The rest of the args are compulsory arguments that need to be passed and can cause issues if missed, they are:
pin will allow the benchmark runner place nodes on specific nodes, using the hostname label.
pin_server what node to pin the server pod to.
pin_client what node to pin the client pod to.
port here is the port on which server listens on and client accesses it
transmit_type can take one of the three values [time,bytes,blockcount]
transmit_value needs to be set accordingly. For ex:
transmit_type: time then transmit_value: 60 => it'll run for 60 seconds
transmit_type: bytes then transmit_value: 4M => it'll run until 4Mbytes have been transferred
and so on.
omit_start takes the first n seconds of the test, to skip past the TCP slow-start period
length_buffer points to length of buffer to read or write
window_size window size in bytes
ip_tos set the IP type of service, takes octal or hex values too so 0x34, 064 and 52 all point to same
mss set TCP maximum segment size
streams number of parallel client streams to run
extra_options_client is a string that holds extra iperf options that is passed along to iperf on the client,
so if you want to run udp it can be -u or if you'd like to run with
zero copy, in reverse direction and use repeating pattern in payload then it'd look like
--repeating-payload --zerocopy.
extra_options_server is similar to extra_options_client except its passed to the pod
that runs iperf server.
Please check man page on what arguments you can pass to client or server to use with extra_options.
The sizes are usually followed KMGT for kilo/mega/giga/tera
Note: You can also store results on a pv, to do so add the following to spec in cr:
hostnetwork will test the performance of the node the pod will run on.
Note: If you want to run with hostnetwork on OpenShift, you will need to execute the following:
$ oc adm policy add-scc-to-user privileged -z benchmark-operator
store_results: true
results:
path: /opt/result-data/
Once done creating/editing the resource file, you can run it by:
# kubectl apply -f resources/crds/ripsaw_v1alpha1_iperf3_cr.yaml # if edited the original one
# kubectl apply -f <path_to_file> # if created a new cr fileDeploying the above(assuming pairs is set to 1) would result in
# kubectl get -o wide pods
NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES
benchmark-operator-75dd8678b9-km5k6 2/2 Running 0 3h49m 172.17.0.8 minikube <none> <none>
example-benchmark-iperf3-client-172.17.0.9-sd9sb 0/1 Completed 0 3h48m 172.17.0.12 minikube <none> <none>
example-benchmark-iperf3-server-0 1/1 Running 0 3h49m 172.17.0.9 minikube <none> <none>The example-benchmark-iperf3-server-0 pod is where iperf server is running
The example-benchmark-iperf3-client-172.17.0.9-sd9sb is where the iperf client is running,
and if you notice the IP address in the name is same as the IP of server pod.
To review the results, kubectl logs <client>, it should look something similar:
[root@smicro-6029p-04 ~]# kubectl logs -f example-benchmark-iperf3-client-172.17.0.9-sd9sb
Connecting to host 172.17.0.9, port 5201
[ 4] local 172.17.0.12 port 54638 connected to 172.17.0.9 port 5201
[ ID] Interval Transfer Bandwidth Retr Cwnd
[ 4] 0.00-1.00 sec 1.43 GBytes 12.3 Gbits/sec 0 137 KBytes
[ 4] 1.00-2.00 sec 1.51 GBytes 13.0 Gbits/sec 0 137 KBytes
[ 4] 2.00-3.00 sec 2.30 GBytes 19.8 Gbits/sec 0 137 KBytes
[ 4] 3.00-4.00 sec 1.98 GBytes 17.0 Gbits/sec 20 95.4 KBytes
[ 4] 4.00-5.00 sec 1.51 GBytes 13.0 Gbits/sec 0 95.4 KBytes
[ 4] 5.00-6.00 sec 1.70 GBytes 14.6 Gbits/sec 0 95.4 KBytes
[ 4] 6.00-7.00 sec 1.52 GBytes 13.0 Gbits/sec 0 95.4 KBytes
[ 4] 7.00-8.00 sec 1.58 GBytes 13.6 Gbits/sec 0 95.4 KBytes
[ 4] 8.00-9.00 sec 1.59 GBytes 13.6 Gbits/sec 0 95.4 KBytes
[ 4] 9.00-10.00 sec 1.73 GBytes 14.9 Gbits/sec 0 95.4 KBytes
[ 4] 10.00-11.00 sec 1.90 GBytes 16.3 Gbits/sec 0 95.4 KBytes
[ 4] 11.00-12.00 sec 1.45 GBytes 12.5 Gbits/sec 0 95.4 KBytes
[ 4] 12.00-13.00 sec 1.90 GBytes 16.4 Gbits/sec 1 95.4 KBytes
[ 4] 13.00-14.00 sec 2.05 GBytes 17.6 Gbits/sec 0 95.4 KBytes
[ 4] 14.00-15.00 sec 1.49 GBytes 12.8 Gbits/sec 0 95.4 KBytes
[ 4] 15.00-16.00 sec 1.99 GBytes 17.1 Gbits/sec 0 95.4 KBytes
[ 4] 16.00-17.00 sec 1.60 GBytes 13.8 Gbits/sec 0 95.4 KBytes
[ 4] 17.00-18.00 sec 1.70 GBytes 14.6 Gbits/sec 0 95.4 KBytes
[ 4] 18.00-19.00 sec 1.62 GBytes 13.9 Gbits/sec 0 95.4 KBytes
[ 4] 19.00-20.00 sec 1.64 GBytes 14.1 Gbits/sec 0 95.4 KBytes
[ 4] 20.00-21.00 sec 1.80 GBytes 15.5 Gbits/sec 0 95.4 KBytes
[ 4] 21.00-22.00 sec 1.59 GBytes 13.6 Gbits/sec 0 95.4 KBytes
[ 4] 22.00-23.00 sec 1.47 GBytes 12.7 Gbits/sec 0 95.4 KBytes
[ 4] 23.00-24.00 sec 2.02 GBytes 17.4 Gbits/sec 0 95.4 KBytes
[ 4] 24.00-25.00 sec 1.64 GBytes 14.1 Gbits/sec 0 95.4 KBytes
[ 4] 25.00-26.00 sec 1.56 GBytes 13.4 Gbits/sec 0 95.4 KBytes
[ 4] 26.00-27.00 sec 1.56 GBytes 13.4 Gbits/sec 0 95.4 KBytes
[ 4] 27.00-28.00 sec 1.65 GBytes 14.1 Gbits/sec 0 95.4 KBytes
[ 4] 28.00-29.00 sec 1.53 GBytes 13.2 Gbits/sec 0 95.4 KBytes
[ 4] 29.00-30.00 sec 1.98 GBytes 17.0 Gbits/sec 0 95.4 KBytes
[ 4] 30.00-31.00 sec 2.22 GBytes 19.1 Gbits/sec 0 95.4 KBytes
[ 4] 31.00-32.00 sec 1.58 GBytes 13.6 Gbits/sec 0 95.4 KBytes
[ 4] 32.00-33.00 sec 1.53 GBytes 13.1 Gbits/sec 0 95.4 KBytes
[ 4] 33.00-34.00 sec 1.71 GBytes 14.7 Gbits/sec 0 95.4 KBytes
[ 4] 34.00-35.00 sec 1.79 GBytes 15.4 Gbits/sec 0 95.4 KBytes
[ 4] 35.00-36.00 sec 1.60 GBytes 13.8 Gbits/sec 0 95.4 KBytes
[ 4] 36.00-37.00 sec 1.71 GBytes 14.7 Gbits/sec 0 95.4 KBytes
[ 4] 37.00-38.00 sec 1.65 GBytes 14.2 Gbits/sec 0 95.4 KBytes
[ 4] 37.00-38.00 sec 1.65 GBytes 14.2 Gbits/sec 0 95.4 KBytes
[ 4] 38.00-39.00 sec 1.61 GBytes 13.8 Gbits/sec 36 95.4 KBytes
[ 4] 39.00-40.00 sec 1.51 GBytes 13.0 Gbits/sec 0 95.4 KBytes
[ 4] 40.00-41.00 sec 1.57 GBytes 13.5 Gbits/sec 0 95.4 KBytes
[ 4] 41.00-42.00 sec 1.71 GBytes 14.7 Gbits/sec 0 95.4 KBytes
[ 4] 42.00-43.00 sec 1.65 GBytes 14.1 Gbits/sec 0 95.4 KBytes
[ 4] 43.00-44.00 sec 1.86 GBytes 16.0 Gbits/sec 0 95.4 KBytes
[ 4] 44.00-45.00 sec 1.63 GBytes 14.0 Gbits/sec 0 95.4 KBytes
[ 4] 45.00-46.00 sec 2.47 GBytes 21.2 Gbits/sec 0 95.4 KBytes
[ 4] 46.00-47.00 sec 1.49 GBytes 12.8 Gbits/sec 0 95.4 KBytes
[ 4] 47.00-48.00 sec 1.60 GBytes 13.7 Gbits/sec 0 95.4 KBytes
[ 4] 48.00-49.00 sec 1.57 GBytes 13.5 Gbits/sec 0 95.4 KBytes
[ 4] 49.00-50.00 sec 1.53 GBytes 13.1 Gbits/sec 0 95.4 KBytes
[ 4] 50.00-51.00 sec 1.62 GBytes 13.9 Gbits/sec 0 95.4 KBytes
[ 4] 51.00-52.00 sec 1.59 GBytes 13.6 Gbits/sec 0 95.4 KBytes
[ 4] 52.00-53.00 sec 1.78 GBytes 15.3 Gbits/sec 1 95.4 KBytes
[ 4] 53.00-54.00 sec 1.77 GBytes 15.2 Gbits/sec 1 95.4 KBytes
[ 4] 54.00-55.00 sec 1.44 GBytes 12.4 Gbits/sec 0 95.4 KBytes
[ 4] 55.00-56.00 sec 1.49 GBytes 12.8 Gbits/sec 0 95.4 KBytes
[ 4] 56.00-57.00 sec 1.56 GBytes 13.4 Gbits/sec 0 95.4 KBytes
[ 4] 57.00-58.00 sec 1.63 GBytes 14.0 Gbits/sec 0 95.4 KBytes
[ 4] 58.00-59.00 sec 1.68 GBytes 14.4 Gbits/sec 0 95.4 KBytes
[ 4] 59.00-60.00 sec 1.66 GBytes 14.3 Gbits/sec 0 95.4 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Retr
[ 4] 0.00-60.00 sec 101 GBytes 14.5 Gbits/sec 59 sender
[ 4] 0.00-60.00 sec 101 GBytes 14.5 Gbits/sec receiver
iperf Done.
As you can see it shows how much data was transferred in each second interval as well as bandwidth and then the summary.