diff --git a/src/Custom.h b/src/Custom.h index 6dfaab7..b85511a 100644 --- a/src/Custom.h +++ b/src/Custom.h @@ -7,7 +7,7 @@ 2) define your own settings below 3) define USE_CUSTOM_H as a build flags. ie : export PLATFORMIO_BUILD_FLAGS="'-DUSE_CUSTOM_H'" */ -//123 +//123 456 /* ####################################################################################################### diff --git a/src/Custom2.h b/src/Custom2.h deleted file mode 100644 index 6dfaab7..0000000 --- a/src/Custom2.h +++ /dev/null @@ -1,590 +0,0 @@ -#ifndef ESPEASY_CUSTOM_H -#define ESPEASY_CUSTOM_H - -/* - To modify the stock configuration without changing the EspEasy.ino file : - 1) rename this file to "Custom.h" (It is ignored by Git) - 2) define your own settings below - 3) define USE_CUSTOM_H as a build flags. ie : export PLATFORMIO_BUILD_FLAGS="'-DUSE_CUSTOM_H'" - */ -//123 - -/* - ####################################################################################################### - Your Own Default Settings - ####################################################################################################### - You can basically ovveride ALL macro defined in ESPEasy.ino. - Don't forget to first #undef each existing #define that you add below. - But since this Custom.h is included before other defines are made, you don't have to undef a lot of defines. - Here are some examples: - */ - -// --- Feature Flagging --------------------------------------------------------- -// Can be set to 1 to enable, 0 to disable, or not set to use the default (usually via define_plugin_sets.h) - -#define FEATURE_RULES_EASY_COLOR_CODE 1 // Use code highlighting, autocompletion and command suggestions in Rules -#define FEATURE_ESPEASY_P2P 1 // (1/0) enables the ESP Easy P2P protocol -#define FEATURE_ARDUINO_OTA 1 // enables the Arduino OTA capabilities -#define FEATURE_THINGSPEAK_EVENT 1 // generate an event when requesting last value of a field in thingspeak via SendToHTTP(e.g. sendToHTTP,api.thingspeak.com,80,/channels/1667332/fields/5/last) -// #define FEATURE_SD 1 // Enable SD card support -// #define FEATURE_DOWNLOAD 1 // Enable downloading a file from an url - -#ifdef BUILD_GIT -# undef BUILD_GIT -#endif // ifdef BUILD_GIT - -#define BUILD_GIT "My Build: " __DATE__ " " __TIME__ - - -#define DEFAULT_NAME "MyEspEasyDevice" // Enter your device friendly name -#define UNIT 0 // Unit Number -#define DEFAULT_DELAY 60 // Sleep Delay in seconds - -// --- Wifi AP Mode (when your Wifi Network is not reachable) ---------------------------------------- -#define DEFAULT_AP_IP 192, 168, 4, 1 // Enter IP address (comma separated) for AP (config) mode -#define DEFAULT_AP_SUBNET 255, 255, 255, 0 // Enter IP address (comma separated) for AP (config) mode -#define DEFAULT_AP_KEY "configesp" // Enter network WPA key for AP (config) mode - -// --- Wifi Client Mode ----------------------------------------------------------------------------- -#define DEFAULT_SSID "MyHomeSSID" // Enter your network SSID -#define DEFAULT_KEY "MySuperSecretPassword" // Enter your network WPA key -#define DEFAULT_SSID2 "" // Enter your fallback network SSID -#define DEFAULT_KEY2 "" // Enter your fallback network WPA key -#define DEFAULT_WIFI_INCLUDE_HIDDEN_SSID false // Allow to connect to hidden SSID APs -#define DEFAULT_USE_STATIC_IP false // (true|false) enabled or disabled static IP -#define DEFAULT_IP "192.168.0.50" // Enter your IP address -#define DEFAULT_DNS "192.168.0.1" // Enter your DNS -#define DEFAULT_GW "192.168.0.1" // Enter your Gateway -#define DEFAULT_SUBNET "255.255.255.0" // Enter your Subnet -#define DEFAULT_IPRANGE_LOW "0.0.0.0" // Allowed IP range to access webserver -#define DEFAULT_IPRANGE_HIGH "255.255.255.255" // Allowed IP range to access webserver -#define DEFAULT_IP_BLOCK_LEVEL 1 // 0: ALL_ALLOWED 1: LOCAL_SUBNET_ALLOWED 2: -// ONLY_IP_RANGE_ALLOWED -#define DEFAULT_ADMIN_USERNAME "admin" -#define DEFAULT_ADMIN_PASS "" - -#define DEFAULT_WIFI_CONNECTION_TIMEOUT 10000 // minimum timeout in ms for WiFi to be connected. -#define DEFAULT_WIFI_FORCE_BG_MODE false // when set, only allow to connect in 802.11B or G mode (not N) -#define DEFAULT_WIFI_RESTART_WIFI_CONN_LOST false // Perform wifi off and on when connection was lost. -#define DEFAULT_ECO_MODE false // When set, make idle calls between executing tasks. -#define DEFAULT_WIFI_NONE_SLEEP false // When set, the wifi will be set to no longer sleep (more power -// used and need reboot to reset mode) -#define DEFAULT_GRATUITOUS_ARP false // When set, the node will send periodical gratuitous ARP - // packets to announce itself. -#define DEFAULT_TOLERANT_LAST_ARG_PARSE false // When set, the last argument of some commands will be parsed to the end of the line - // See: https://github.com/letscontrolit/ESPEasy/issues/2724 -#define DEFAULT_SEND_TO_HTTP_ACK false // Wait for ack with SendToHttp command. - -#define DEFAULT_AP_DONT_FORCE_SETUP false // Allow optional usage of Sensor without WIFI avaiable // When set you can use the Sensor in AP-Mode without beeing forced to /setup -#define DEFAULT_DONT_ALLOW_START_AP false // Usually the AP will be started when no WiFi is defined, or the defined one cannot be found. This flag may prevent it. - -// --- Default Controller ------------------------------------------------------------------------------ -#define DEFAULT_CONTROLLER false // true or false enabled or disabled, set 1st controller - // defaults -#define DEFAULT_CONTROLLER_ENABLED true // Enable default controller by default -#define DEFAULT_CONTROLLER_USER "" // Default controller user -#define DEFAULT_CONTROLLER_PASS "" // Default controller Password - -// using a default template, you also need to set a DEFAULT PROTOCOL to a suitable MQTT protocol ! -#define DEFAULT_PUB "sensors/espeasy/%sysname%/%tskname%/%valname%" // Enter your pub -#define DEFAULT_SUB "sensors/espeasy/%sysname%/#" // Enter your sub -#define DEFAULT_SERVER "192.168.0.8" // Enter your Server IP address -#define DEFAULT_SERVER_HOST "" // Server hostname -#define DEFAULT_SERVER_USEDNS false // true: Use hostname. false: use IP -#define DEFAULT_USE_EXTD_CONTROLLER_CREDENTIALS false // true: Allow longer user credentials for controllers - -#define DEFAULT_PORT 8080 // Enter your Server port value -#define DEFAULT_CONTROLLER_TIMEOUT 100 // Default timeout in msec - -#define DEFAULT_PROTOCOL 0 // Protocol used for controller communications - // 0 = Stand-alone (no controller set) - // 1 = Domoticz HTTP - // 2 = Domoticz MQTT - // 3 = Nodo Telnet - // 4 = ThingSpeak - // 5 = Home Assistant (openHAB) MQTT - // 6 = PiDome MQTT - // 7 = EmonCMS - // 8 = Generic HTTP - // 9 = FHEM HTTP - -#ifdef ESP8266 -#define DEFAULT_PIN_I2C_SDA 4 -#endif -#ifdef ESP32 -#define DEFAULT_PIN_I2C_SDA -1 // Undefined -#endif -#ifdef ESP8266 -#define DEFAULT_PIN_I2C_SCL 5 -#endif -#ifdef ESP32 -#define DEFAULT_PIN_I2C_SCL -1 // Undefined -#endif -#define DEFAULT_I2C_CLOCK_SPEED 400000 // Use 100 kHz if working with old I2C chips -#define FEATURE_I2C_DEVICE_SCAN 1 - -#define DEFAULT_SPI 0 //0=disabled 1=enabled and for ESP32 there is option 2 =HSPI - -#define DEFAULT_PIN_STATUS_LED (-1) -#define DEFAULT_PIN_STATUS_LED_INVERSED true - -#define DEFAULT_PIN_RESET_BUTTON (-1) - - -#define DEFAULT_USE_RULES false // (true|false) Enable Rules? -#define DEFAULT_RULES_OLDENGINE true - -#define DEFAULT_MQTT_RETAIN false // (true|false) Retain MQTT messages? -#define DEFAULT_CONTROLLER_DELETE_OLDEST false // (true|false) to delete oldest message when queue is full -#define DEFAULT_CONTROLLER_MUST_CHECK_REPLY false // (true|false) Check Acknowledgment -#define DEFAULT_MQTT_DELAY 100 // Time in milliseconds to retain MQTT messages -#define DEFAULT_MQTT_LWT_TOPIC "" // Default lwt topic -#define DEFAULT_MQTT_LWT_CONNECT_MESSAGE "Connected" // Default lwt message -#define DEFAULT_MQTT_LWT_DISCONNECT_MESSAGE "Connection Lost" // Default lwt message -#define DEFAULT_MQTT_USE_UNITNAME_AS_CLIENTID 0 - -#define DEFAULT_USE_NTP false // (true|false) Use NTP Server -#define DEFAULT_NTP_HOST "" // NTP Server Hostname -#define DEFAULT_TIME_ZONE 0 // Time Offset (in minutes) -#define DEFAULT_USE_DST false // (true|false) Use Daily Time Saving - -#define DEFAULT_LATITUDE 0.0f // Default Latitude -#define DEFAULT_LONGITUDE 0.0f // Default Longitude - -#define DEFAULT_SYSLOG_IP "" // Syslog IP Address -#define DEFAULT_SYSLOG_PORT 0 // Standard syslog port: 514 -#define DEFAULT_SYSLOG_FACILITY 0 // kern -#define DEFAULT_SYSLOG_LEVEL 0 // Syslog Log Level -#define DEFAULT_SERIAL_LOG_LEVEL LOG_LEVEL_INFO // Serial Log Level -#define DEFAULT_WEB_LOG_LEVEL LOG_LEVEL_INFO // Web Log Level -#define DEFAULT_SD_LOG_LEVEL 0 // SD Card Log Level -#define DEFAULT_USE_SD_LOG false // (true|false) Enable Logging to the SD card - -#define DEFAULT_USE_SERIAL true // (true|false) Enable Logging to the Serial Port -#define DEFAULT_SERIAL_BAUD 115200 // Serial Port Baud Rate - -#define DEFAULT_SYNC_UDP_PORT 8266 // Used for ESPEasy p2p. (IANA registered port: 8266) - - -// Factory Reset defaults -#define DEFAULT_FACTORY_RESET_KEEP_UNIT_NAME true -#define DEFAULT_FACTORY_RESET_KEEP_WIFI true -#define DEFAULT_FACTORY_RESET_KEEP_NETWORK true -#define DEFAULT_FACTORY_RESET_KEEP_NTP_DST true -#define DEFAULT_FACTORY_RESET_KEEP_CONSOLE_LOG true - - -#define BUILD_NO_DEBUG - -// Custom built-in url for hosting JavaScript and CSS files. -#define CUSTOM_BUILD_CDN_URL "https://cdn.jsdelivr.net/gh/letscontrolit/ESPEasy@mega/static/" - - - -// Special SSID/key setup only to be used in custom builds. - -// Deployment SSID will be used only when the configured SSIDs are not reachable and/or no credentials are set. -// This to make deployment of large number of nodes easier -#define CUSTOM_DEPLOYMENT_SSID "" // Enter SSID not shown in UI, to be used on custom builds to ease deployment -#define CUSTOM_DEPLOYMENT_KEY "" // Enter key not shown in UI, to be used on custom builds to ease deployment -#define CUSTOM_SUPPORT_SSID "" // Enter SSID not shown in UI, to be used on custom builds to ease support -#define CUSTOM_SUPPORT_KEY "" // Enter key not shown in UI, to be used on custom builds to ease support - - -// Emergency fallback SSID will only be attempted in the first 10 minutes after reboot. -// When found, the unit will connect to it and depending on the built in flag, it will either just connect to it, or clear set credentials. -// Use case: User connects to a public AP which does need to agree on an agreement page for the rules of conduct (e.g. open APs) -// This is seen as a valid connection, so the unit will not reconnect to another node and thus becomes inaccessible. -#define CUSTOM_EMERGENCY_FALLBACK_SSID "" // Enter SSID not shown in UI, to be used to regain access to the node -#define CUSTOM_EMERGENCY_FALLBACK_KEY "" // Enter key not shown in UI, to be used to regain access to the node - -#define CUSTOM_EMERGENCY_FALLBACK_RESET_CREDENTIALS false -#define CUSTOM_EMERGENCY_FALLBACK_START_AP false - -#define CUSTOM_EMERGENCY_FALLBACK_ALLOW_MINUTES_UPTIME 10 - -// Allow for remote provisioning of a node. -// This is only allowed for custom builds. -// To setup the configuration of the provisioning file, one must also define FEATURE_SETTINGS_ARCHIVE -// Default setting is to not allow to configure a node remotely, unless explicitly enabled. -// #define FEATURE_CUSTOM_PROVISIONING 1 - -#define FEATURE_SSDP 1 - -#define FEATURE_EXT_RTC 1 // Support for external RTC clock modules like PCF8563/PCF8523/DS3231/DS1307 - -#define FEATURE_PLUGIN_STATS 1 // Support collecting historic data + computing stats on historic data -#ifdef ESP8266 -# define PLUGIN_STATS_NR_ELEMENTS 16 -#endif // ifdef ESP8266 -# ifdef ESP32 -# define PLUGIN_STATS_NR_ELEMENTS 64 -#endif // ifdef ESP32 -#define FEATURE_CHART_JS 1 // Support for drawing charts, like PluginStats historic data - -// Optional alternative CDN links: -// Chart.js: (only used when FEATURE_CHART_JS is enabled) -// #define CDN_URL_CHART_JS "https://cdn.jsdelivr.net/npm/chart.js@4.1.2/dist/chart.umd.min.js" -// JQuery: -// #define CDN_URL_JQUERY "https://code.jquery.com/jquery-3.6.0.min.js" - - -// #define FEATURE_SETTINGS_ARCHIVE 1 -// #define FEATURE_I2CMULTIPLEXER 1 -// #define FEATURE_TRIGONOMETRIC_FUNCTIONS_RULES 1 -// #define PLUGIN_USES_ADAFRUITGFX // Used by Display plugins using Adafruit GFX library -// #define ADAGFX_ARGUMENT_VALIDATION 0 // Disable argument validation in AdafruitGFX_helper -// #define ADAGFX_SUPPORT_7COLOR 0 // Disable the support of 7-color eInk displays by AdafruitGFX_helper -// #define FEATURE_SEND_TO_HTTP 1 // Enable availability of the SendToHTTP command -// #define FEATURE_POST_TO_HTTP 1 // Enable availability of the PostToHTTP command -// #define FEATURE_PUT_TO_HTTP 1 // Enable availability of the PutToHTTP command -// #define FEATURE_I2C_DEVICE_CHECK 0 // Disable the I2C Device check feature -// #define FEATURE_I2C_GET_ADDRESS 0 // Disable fetching the I2C address from I2C plugins. Will be enabled when FEATURE_I2C_DEVICE_CHECK is enabled -// #define FEATURE_RTTTL 1 // Enable rtttl command -// #define FEATURE_ANYRTTTL_LIB 1 // Use AnyRttl library for RTTTL handling -// #define FEATURE_ANYRTTTL_ASYNC 1 // When AnyRttl enabled, use Async (nonblocking) mode instead of the default Blocking mode -// #define FEATURE_RTTTL_EVENTS 1 // Enable RTTTL events for Async use, for blocking it doesn't make sense - -#if FEATURE_CUSTOM_PROVISIONING -// For device models, see src/src/DataTypes/DeviceModel.h -// #ifdef ESP32 -// #define DEFAULT_FACTORY_DEFAULT_DEVICE_MODEL 0 // DeviceModel_default -// #endif -// #ifdef ESP8266 -// #define DEFAULT_FACTORY_DEFAULT_DEVICE_MODEL 0 // DeviceModel_default -// #endif -// #define DEFAULT_PROVISIONING_FETCH_RULES1 false -// #define DEFAULT_PROVISIONING_FETCH_RULES2 false -// #define DEFAULT_PROVISIONING_FETCH_RULES3 false -// #define DEFAULT_PROVISIONING_FETCH_RULES4 false -// #define DEFAULT_PROVISIONING_FETCH_NOTIFICATIONS false -// #define DEFAULT_PROVISIONING_FETCH_SECURITY false -// #define DEFAULT_PROVISIONING_FETCH_CONFIG false -// #define DEFAULT_PROVISIONING_FETCH_PROVISIONING false -// #define DEFAULT_PROVISIONING_FETCH_FIRMWARE false -// #define DEFAULT_PROVISIONING_SAVE_URL false -// #define DEFAULT_PROVISIONING_SAVE_CREDENTIALS false -// #define DEFAULT_PROVISIONING_ALLOW_FETCH_COMMAND false -// #define DEFAULT_PROVISIONING_URL "" -// #define DEFAULT_PROVISIONING_USER "" -// #define DEFAULT_PROVISIONING_PASS "" -#endif - - - - -/* - ####################################################################################################### - Defining web interface - ####################################################################################################### - */ - -#define MENU_INDEX_MAIN_VISIBLE true -/* -#define MENU_INDEX_CONFIG_VISIBLE false -#define MENU_INDEX_CONTROLLERS_VISIBLE false -#define MENU_INDEX_HARDWARE_VISIBLE false -#define MENU_INDEX_DEVICES_VISIBLE false -#define MENU_INDEX_RULES_VISIBLE false -#define MENU_INDEX_NOTIFICATIONS_VISIBLE false -#define MENU_INDEX_TOOLS_VISIBLE false -*/ - -#define MAIN_PAGE_SHOW_SYSINFO_BUTTON true -#define MAIN_PAGE_SHOW_WiFi_SETUP_BUTTON true -#define MAIN_PAGE_SHOW_BASIC_INFO_NOT_LOGGED_IN false - -#define MAIN_PAGE_SHOW_NODE_LIST_BUILD true -#define MAIN_PAGE_SHOW_NODE_LIST_TYPE true - -#define SETUP_PAGE_SHOW_CONFIG_BUTTON true - -// #define FEATURE_AUTO_DARK_MODE 0 // 0 = Disable auto-dark mode -// #define FEATURE_EXTENDED_TASK_VALUE_TYPES 0 // 0 = Disable extra task value types like 64 bit ints, double, etc. in Dummy tasks -// #define FEATURE_USE_DOUBLE_AS_ESPEASY_RULES_FLOAT_TYPE 0 // 0 = switch to float as floating point type for rules/formula processing. - -//#define WEBPAGE_TEMPLATE_HIDE_HELP_BUTTON - -#define SHOW_SYSINFO_JSON 1 //Enables the sysinfo_json page (by default is enabled when WEBSERVER_NEW_UI is enabled too) - -/* - ####################################################################################################### - CSS / template - ####################################################################################################### - */ -/* -#define WEBPAGE_TEMPLATE_DEFAULT_HEADER "

ESP Easy Mega: {{title}}


" -#define WEBPAGE_TEMPLATE_DEFAULT_FOOTER "" -#define WEBPAGE_TEMPLATE_AP_HEADER "

Welcome to ESP Easy Mega AP

" -#define WEBPAGE_TEMPLATE_HIDE_HELP_BUTTON -*/ -// Embed Custom CSS in Custom.h: -/* -#define WEBSERVER_EMBED_CUSTOM_CSS -static const char DATA_ESPEASY_DEFAULT_MIN_CSS[] PROGMEM = { -... -,0}; -*/ - - -/* - ####################################################################################################### - Special settings (rendering settings incompatible with other builds) - ####################################################################################################### - */ - -// #define FEATURE_NON_STANDARD_24_TASKS 1 - -/* - ####################################################################################################### - Your Own selection of plugins and controllers - ####################################################################################################### - */ - -#define CONTROLLER_SET_NONE -#define NOTIFIER_SET_NONE -#define PLUGIN_SET_NONE - - -/* - ####################################################################################################### - ########### Plugins - ####################################################################################################### - */ - -// #define FEATURE_SERVO 1 // Uncomment and set to 0 to explicitly disable SERVO support - - - #define USES_P001 // Switch - #define USES_P002 // ADC - #define USES_P003 // Pulse - #define USES_P004 // 1-Wire Temperature (Dallas/Maxim DS18B20) -// #define USES_P005 // DHT11/12/22 SONOFF2301/7021/MS01 -// #define USES_P006 // BMP085/180 -// #define USES_P007 // PCF8591 -// #define USES_P008 // Wiegand (RFID) -// #define USES_P009 // MCP23017 - -// #define USES_P010 // BH1750 -// #define USES_P011 // ProMini Extender -// #define USES_P012 // LCD2004 - #define USES_P013 // HC-SR04/RCW-0001 -// #define USES_P014 // SI70xx/HTU21D -// #define USES_P015 // TSL2561 -// #define USES_P017 // PN532 -// #define USES_P018 // GP2Y10 -// #define USES_P019 // PCF8574 - - #define USES_P020 // Ser2Net -// #define USES_P021 // Level Control -// #define USES_P022 // PCA9685 -// #define USES_P023 // OLED SSD1306 -// #define USES_P024 // MLX90614 -// #define USES_P025 // ADS1x15 -// #define USES_P026 // SysInfo -// #define USES_P027 // INA219 -// #define USES_P028 // BMx280 -// #define USES_P029 // Domoticz MQTT Helper - -// #define USES_P031 // SHT1x -// #define USES_P032 // MS5611 (GY-63) - #define USES_P033 // Dummy Device -// #define USES_P034 // DHT12 -// #define USES_P036 // OLED SSD1306/SH1106 Framed -// #define P036_FEATURE_DISPLAY_PREVIEW 1 // Enable Preview feature, shows on-display content on Devices overview page -// #define P036_FEATURE_ALIGN_PREVIEW 1 // Enable center/right-align feature when preview is enabled (auto-disabled for 1M builds) -// #define P036_ENABLE_TICKER 1 // Enable ticker function - #define USES_P037 // MQTT Import - #define P037_MAPPING_SUPPORT 1 // Enable Value mapping support - #define P037_FILTER_SUPPORT 1 // Enable filtering support - #define P037_JSON_SUPPORT 1 // Enable Json support -// #define USES_P038 // NeoPixel -// #define P038_FEATURE_NEOPIXELFOR 1 // Enable NeoPixelFor/NeoPixelForHSV commands (default enabled for ESP32) -// #define USES_P039 // Thermocouple - -// #define USES_P040 // RFID - ID12LA/RDM6300 -// #define USES_P041 // NeoPixel (Word Clock) -// #define USES_P042 // NeoPixel (Candle) -// #define USES_P043 // ClkOutput -// #define USES_P044 // P1 Wifi Gateway -// #define USES_P045 // MPU6050 -// #define USES_P046 // Ventus W266 -// #define USES_P047 // Soil moisture sensor - #define USES_P048 // Motoshield v2 -// #define USES_P049 // MH-Z19 - -// #define USES_P050 // TCS34725 RGB Color Sensor with IR filter and White LED -// #define USES_P051 // AM2320 -// #define USES_P052 // SenseAir -// #define USES_P053 // PMSx003 / PMSx003ST -// #define USES_P054 // DMX512 - #define USES_P055 // Chiming -// #define USES_P056 // SDS011/018/198 -// #define USES_P057 // HT16K33_LED -// #define USES_P058 // HT16K33_KeyPad - #define USES_P059 // Rotary Encoder - -// #define USES_P060 // MCP3221 -// #define USES_P061 // PCF8574 / MCP23017 / PCA8575 -// #define USES_P062 // MPR121 -// #define USES_P063 // TTP229 -// #define USES_P064 // APDS9960 Gesture -// #define USES_P065 // DRF0299 -// #define USES_P066 // VEML6040 -// #define USES_P067 // HX711_Load_Cell -// #define USES_P068 // SHT3x -// #define USES_P069 // LM75A - -// #define USES_P070 // NeoPixel_Clock -// #define USES_P071 // Kamstrup401 -// #define USES_P072 // HDC1000/HDC1008/HDC1010/HDC1050/HDC1080 -// #define USES_P073 // 7-segment display -// #define USES_P074 // TSL2591 -// #define USES_P075 // Nextion -// #define USES_P076 // HLW8012/BL0937 (Shelly Plug S, Sonoff POW R1, Huafan SS, KMC 70011, Aplic WDP303075, SK03 Outdoor, BlitzWolf SHP, Teckin, Teckin US, Gosund SP1 v23) -// #define USES_P077 // CSE7766 (Sonoff S31, Sonoff POW R2, Sonoff POW R3xx(D), Sonoff Dual R3) -// #define USES_P078 // Eastron SDMxxx Modbus - #define USES_P079 // Wemos / Lolin Motorshield - -// #define USES_P080 // iButton Sensor DS1990A - #define USES_P081 // Cron -// #define USES_P082 // GPS -// #define USES_P083 // SGP30 TVOC -// #define USES_P084 // VEML6070 -// #define USES_P085 // AcuDC24x - #define USES_P086 // Receiving values according Homie convention. Works together with C014 Homie controller - #define USES_P087 // Serial Proxy -// #define USES_P088 // HeatpumpIR - #define USES_P089 // Ping - -// #define USES_P090 // CCS811 TVOC -// #define USES_P091 // Serial MCU controlled switch -// #define USES_P092 // DLbus -// #define USES_P093 // Mitsubishi Heat Pump -// #define USES_P094 // CUL Reader -// #define USES_P095 // ILI934x / ILI948x -// #define USES_P096 // eInk -// #define USES_P097 // ESP32 Touch - #define USES_P098 // PWM Motor -// #define USES_P099 // XPT2046 touchscreen - -// #define USES_P100 // DS2423 counter -// #define USES_P101 // Wake On Lan -// #define USES_P102 // PZEM-004Tv30-Multiple -// #define USES_P103 // Atlas Scientific EZO Sensors (pH, ORP, EZO, DO) -// #define USES_P104 // MAX7219 dot matrix -// #define USES_P105 // AHT10/AHT2x -// #define USES_P106 // BME68x -// #define USES_P107 // SI1145 -// #define USES_P108 // DDS238-x ZN Modbus energy meters -// #define USES_P109 // ThermoOLED - -// #define USES_P110 // VL53L0X Time of Flight sensor -// #define USES_P111 // MFRC522 RFID reader -// #define USES_P112 // AS7265x -// #define USES_P113 // VL53L1X ToF -// #define USES_P114 // VEML6075 -// #define USES_P115 // MAX1704x -// #define USES_P116 // ST77xx -// #define USES_P117 // SCD30 -// #define USES_P118 // Itho -// #define USES_P119 // ITG3205 Gyro - -// #define USES_P120 // ADXL345 I2C Acceleration / Gravity -// #define USES_P121 // HMC5883L -// #define USES_P122 // SHT2x -// #define USES_P123 // I2C Touchscreens -// #define USES_P124 // I2C Multi Relay -// #define USES_P125 // ADXL345 SPI Acceleration / Gravity -// #define USES_P126 // 74HC595 Shift register -// #define USES_P127 // CDM7160 -// #define USES_P128 // NeoPixel (BusFX) -// #define P128_USES_GRB // Default -// #define P128_USES_GRBW // Select 1 option, only first one enabled from this list will be used -// #define P128_USES_RGB -// #define P128_USES_RGBW -// #define P128_USES_BRG -// #define P128_USES_BGR -// #define P128_USES_RBG -// #define P128_ENABLE_FAKETV 1 // Enable(1)/Disable(0) FakeTV effect, disabled by default on ESP8266 (.bin size issue), enabled by default on ESP32 -// #define USES_P129 // 74HC165 Input shiftregisters - -// #define USES_P131 // NeoPixel Matrix -// #define USES_P132 // INA3221 -// #define USES_P133 // LTR390 UV -// #define USES_P134 // A02YYUW -// #define USES_P135 // SCD4x - #define P135_FEATURE_RESET_COMMANDS 1 // Enable/Disable quite spacious (~950 bytes) 'selftest' and 'factoryreset' subcommands -// #define USES_P137 // AXP192 -// #define USES_P138 // IP5306 - -// #define USES_P141 // PCD8544 Nokia 5110 LCD -// #define USES_P142 // Position - AS5600 -// #define USES_P143 // I2C Rotary encoders -// #define P143_FEATURE_INCLUDE_M5STACK 0 // Enabled by default, can be turned off here -// #define P143_FEATURE_INCLUDE_DFROBOT 0 // Enabled by default, can be turned off here -// #define P143_FEATURE_COUNTER_COLORMAPPING 0 // Enabled by default, can be turned off here - -// #define USES_P144 // PM1006(K) (Vindriktning) -// #define USES_P145 // MQxxx (MQ135 CO2, MQ3 Alcohol) - #define USES_P146 // Cache Reader -// #define USES_P147 // SGP4x -// #define P147_FEATURE_GASINDEXALGORITHM 0 // Enabled by default, can be turned off here - -// #define USES_P148 // POWR3xxD/THR3xxD -// #define USES_P150 // TMP117 Temperature -// #define USES_P151 // Honeywell Pressure -// #define USES_P152 // ESP32 DAC -// #define USES_P153 // SHT4x -// #define USES_P154 // BMP3xx - -// #define USES_P159 // Presence - LD2410 Radar detection - -// #define USES_P162 // Output - MCP42xxx Digipot -// #define USES_P164 // Gases - ENS16x TVOC/eCO2 -// #define USES_P166 // Output - GP8403 Dual channel DAC (Digital Analog Converter) -// #define USES_P167 // Environment - Sensirion SEN5x / Ikea Vindstyrka -// #define USES_P168 // Light - VEML6030/VEML7700 -// #define USES_P169 // Environment - AS3935 Lightning Detector -// #define USES_P170 // Input - I2C Liquid level sensor -// #define USES_P172 // BMP3xx SPI. - -/* - ####################################################################################################### - ########### Controllers - ####################################################################################################### - */ - - -// #define USES_C001 // Domoticz HTTP -// #define USES_C002 // Domoticz MQTT -// #define USES_C003 // Nodo telnet -// #define USES_C004 // ThingSpeak -// #define USES_C005 // Home Assistant (openHAB) MQTT -// #define USES_C006 // PiDome MQTT - #define USES_C007 // Emoncms - #define USES_C008 // Generic HTTP -// #define USES_C009 // FHEM HTTP - #define USES_C010 // Generic UDP - #define USES_C011 // Generic HTTP Advanced - #define USES_C012 // Blynk HTTP - #define USES_C013 // ESPEasy P2P network - #define USES_C014 // homie 3 & 4dev MQTT - #define USES_C015 // Blynk - #define USES_C016 // Cache controller -// #define USES_C017 // Zabbix -// #define USES_C018 // TTN/RN2483 - - -/* - ####################################################################################################### - ########### Notifiers - ####################################################################################################### - */ - - - #define USES_N001 // Email - #define USES_N002 // Buzzer - - -#endif // ESPEASY_CUSTOM_H