Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Minisat server not working after reboot #135

Closed
scho0ck opened this issue Dec 30, 2018 · 8 comments
Closed

Minisat server not working after reboot #135

scho0ck opened this issue Dec 30, 2018 · 8 comments

Comments

@scho0ck
Copy link

scho0ck commented Dec 30, 2018

I'm new to minisat and this firmware but I'm having the issue that once I reboot my Digibit R1 I'm unable to tune to any MUX and the webinterface with the satip.xml and the stats is offline as well I then have to kill the minisat process and restart it in order to make it work however the web crashes after a while again but then at least I'm able to watch TV.

Using the latest fix1 firmware with the parameters "-e 0-1 -O" logread and dmesg show no error at all?
@scho0ck
Copy link
Author

scho0ck commented Dec 30, 2018 •
edited
Loading

This is my config

#
MINISATIP8="yes"
MINISATIP8_OPTS="-e 0-1 -O"

Dmesg

Boot params:
... MOUNT_ROOT_RDONLY - 00000001
... RAMDISK_FLAGS     - 00000000
... ORIG_ROOT_DEV     - 00000200
... LOADER_TYPE       - 00000000
... INITRD_START      - 00000000
... INITRD_SIZE       - 00000000
Booting machvec: idl4k
Node 0: start_pfn = 0x70000, low = 0x8f000
Zone PFN ranges:
  Normal   0x00070000 -> 0x0008f000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00070000 -> 0x0008f000
On node 0 totalpages: 126976
free_area_init_node: node 0, pgdat 8145feb8, node_mem_map 82b4d000
  Normal zone: 992 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 125984 pages, LIFO batch:31
Inverto idl4k board initialisation
STx7108 version 2.x, HOST core
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
Kernel command line:  console= hw=16001000000000000000000000000000 sn=1S81T51717000269 uuid=5ADA6D378BCB48A09635CC561E2EB80F revBoot=stm24_0056-idl4k console=ttyAS0,115200 bigphysarea=20000
bpa2: partition 'bigphysarea' created at 0x72f31000, size 80000 kB (0x04e20000 B)
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
PVR=04909300 CVR=60880000 PRR=0000a320
I-cache : n_ways=2 n_sets=512 way_incr=16384
I-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
D-cache : n_ways=2 n_sets=512 way_incr=16384
D-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
Memory: 379008k/507904k available (3385k kernel code, 1095k data, 22344k init)
Hierarchical RCU implementation.
NR_IRQS:500
Failed to enable clk CLKA0_REF, ignoring
Failed to enable clk CLKA0_PLL0LS, ignoring
Failed to enable clk CLKA1_REF, ignoring
Failed to enable clk CLKA1_PLL0LS, ignoring
Console: colour dummy device 80x25
console [ttyAS0] enabled
sh_tmu: TMU0 used for clock events
sh_tmu: TMU0 used for periodic clock events
sh_tmu: TMU1 used as clock source
Calibrating delay loop... 595.96 BogoMIPS (lpj=297984)
Mount-cache hash table entries: 512
CPU: STx7108
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource TMU1
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
[STM]: [PM]: HoM support registered
[STM]: [PM]: [HoM]: Early console @ 0xfd733000
Installing knfsd (copyright (C) 1996 [email protected]).
Slow work thread pool: Starting up
Slow work thread pool: Ready
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
fuse init (API version 7.13)
msgmni has been set to 740
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
STMicroelectronics ASC driver initialized
stm-asc.0: ttyAS0 at MMIO 0xfd733000 (irq = 108) is a stm-asc
brd: module loaded
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xf1 (Micron NAND 128MiB 3,3V 8-bit)
Bad block table found at page 65472, version 0x01
Bad block table found at page 65408, version 0x01
cmdlinepart partition parsing not available
Creating 5 MTD partitions on "stm-nand-flex.0":
0x000000000000-0x000000020000 : "nand-env"
0x000000020000-0x000000420000 : "nand-system"
0x000000420000-0x000002420000 : "nand-fw1"
0x000002420000-0x000004420000 : "nand-fw2"
0x000004420000-0x000008000000 : "nand-data"
stmmac - user ID: 0x10, Synopsys ID: 0x33
 No HW DMA feature register supported
 Enhanced/Alternate descriptors
 RX Checksum Offload Engine supported
 TX Checksum insertion supported
 Wake-Up On Lan supported
STMMAC MII Bus: probed
eth0: PHY ID 001cc915 at 0 IRQ 0 (1:00)
eth0: PHY ID 001cc915 at 1 IRQ 25 (1:01) active
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
stm_usb_probe: usb_phy_clk clock not found for stm-usb.0
stm-ehci stm-ehci.0: STMicroelectronics EHCI Host Controller
stm-ehci stm-ehci.0: new USB bus registered, assigned bus number 1
stm-ehci stm-ehci.0: irq 124, io mem 0xfe0ffe00
stm-ehci stm-ehci.0: USB 0.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
stm-ohci stm-ohci.0: STMicroelectronics OHCI Host Controller
stm-ohci stm-ohci.0: new USB bus registered, assigned bus number 2
stm-ohci stm-ohci.0: irq 127, io mem 0xfe0ffc00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
stm_usb_probe: usb_phy_clk clock not found for stm-usb.1
stm-ehci stm-ehci.1: STMicroelectronics EHCI Host Controller
stm-ehci stm-ehci.1: new USB bus registered, assigned bus number 3
stm-ehci stm-ehci.1: irq 125, io mem 0xfe1ffe00
stm-ehci stm-ehci.1: USB 0.0 started, EHCI 1.00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
stm-ohci stm-ohci.1: STMicroelectronics OHCI Host Controller
stm-ohci stm-ohci.1: new USB bus registered, assigned bus number 4
stm-ohci stm-ohci.1: irq 128, io mem 0xfe1ffc00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
stm_usb_probe: usb_phy_clk clock not found for stm-usb.2
stm-ehci stm-ehci.2: STMicroelectronics EHCI Host Controller
stm-ehci stm-ehci.2: new USB bus registered, assigned bus number 5
stm-ehci stm-ehci.2: irq 126, io mem 0xfe2ffe00
stm-ehci stm-ehci.2: USB 0.0 started, EHCI 1.00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
stm-ohci stm-ohci.2: STMicroelectronics OHCI Host Controller
stm-ohci stm-ohci.2: new USB bus registered, assigned bus number 6
stm-ohci stm-ohci.2: irq 129, io mem 0xfe2ffc00
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
i2c /dev entries driver
stm i2c clock = 100500000, ns_per_clk = 9
stm i2c modified clock = 50250000, ns_per_clk = 19
stm i2c clock = 100500000, ns_per_clk = 9
stm i2c modified clock = 50250000, ns_per_clk = 19
at24 1-0050: 8192 byte 24c64 EEPROM (writable)
sh_tmu: TMU0 kept as earlytimer
sh_tmu: TMU1 kept as earlytimer
STMicroelectronics - Coprocessors st231 Init
st-coprocessor-0: No RAM reserved
st231.0 Coprocessor -------------------------------------------
    not configured!
---------------------------------------------------------------
st-coprocessor-1: No RAM reserved
st231.1 Coprocessor -------------------------------------------
    not configured!
---------------------------------------------------------------
st-coprocessor-2: No RAM reserved
st231.2 Coprocessor -------------------------------------------
    not configured!
---------------------------------------------------------------
TCP cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
All bugs added by David S. Miller <[email protected]>
[STM]: [PM]: Suspend support registered
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Freeing unused kernel memory: 22344k freed
Empty flash at 0x00d88bb8 ends at 0x00d89000
Empty flash at 0x00d929dc ends at 0x00d93000
Empty flash at 0x0392f9b0 ends at 0x03930000
Empty flash at 0x039399dc ends at 0x0393a000
Empty flash at 0x0393cb10 ends at 0x0393d000
Empty flash at 0x0393d8a4 ends at 0x0393e000
stapi_core: module license 'ST Microelectronics' taints kernel.
Disabling lock debugging due to kernel taint
Load module sttbx_early_core
Load module stos_core [?]               by insmod (pid 463)
Load module stcommon_core [?]           by insmod (pid 463)
Load module sttbx_core [?]              by insmod (pid 463)
Load module stevt_core [?]              by insmod (pid 463)
Load module stavmem_core [?]            by insmod (pid 463)
Load module stbuffer_core [?]           by insmod (pid 463)
Load module stclock_core [252]          by insmod (pid 463)
Load module stpower_core [251]          by insmod (pid 463)
Load module stpio_core [?]              by insmod (pid 463)
Load module stfdma_core [250]           by insmod (pid 463)
Load module stinject_core [?]           by insmod (pid 463)
Load module stnet_core [?]              by insmod (pid 463)
Load module stpti5_core [?]             by insmod (pid 463)
Load module stcommon_ioctl [249]        by insmod (pid 469)
Load module sttbx_ioctl [248]           by insmod (pid 469)
Load module stevt_ioctl [247]           by insmod (pid 469)
Load module stavmem_ioctl [246]         by insmod (pid 469)
Load module stbuffer_ioctl [245]        by insmod (pid 469)
Load module stpower_ioctl [244]         by insmod (pid 469)
Load module stpio_ioctl [243]           by insmod (pid 469)
Load module stfdma_ioctl [240]          by insmod (pid 469)
Load module stinject_ioctl [239]        by insmod (pid 469)
Load module stnet_ioctl [238]           by insmod (pid 469)
Load module stsys_ioctl [237]           by insmod (pid 469)
Load module stpti5_ioctl [236]          by insmod (pid 469)
I2C-Bus AXE mangle module loaded
[demod900] setup [num_demods 4]
[pll6120] setup [num_plls:4] [clk:30000000] [bbgain:16]
[fe] Checking lut 0xC1AD064C
[fe] Checking lut 0xC1AD0682
[fe] Checking lut 0xC1AD064C
[fe] Checking lut 0xC1AD06B0
[dmx] ... init 0
[fta_fe] FE Initialization done, res 0
[dmx-ts] ... init 0
USB Serial support registered for cp210x
usbcore: registered new interface driver cp210x
cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
eth0: device MAC address 00:24:a6:00:23:1b
STMMAC MII Bus: Can't get IRQ 25 (PHY)
 No MAC Management Counters available
@@@@@@@@@@@@ fe_open 0
@@@@@@@@@@@@ fe_open 1
@@@@@@@@@@@@ fe_open 2
@@@@@@@@@@@@ fe_open 3
@@@@@@@@@@@@ fe_open 0
@@@@@@@@@@@@ fe_open 1
PHY: 1:01 - Link is Up - 1000/Full
[dms-ts] stream stop ok
[dms-ts] stream stop ok
@@@@@@@@@@@@ fe_open 1
[dms-ts] stream stop ok
[dms-ts] stream stop ok
@@@@@@@@@@@@ fe_open 0
@@@@@@@@@@@@ fe_open 1
@@@@@@@@@@@@ fe_open 2
@@@@@@@@@@@@ fe_open 3
@@@@@@@@@@@@ fe_open 0
@@@@@@@@@@@@ fe_open 1
[dms-ts] stream stop ok
[dms-ts] stream stop ok
[dms-ts] stream stop ok
[dms-ts] stream stop ok
@@@@@@@@@@@@ fe_open 0
[dms-ts] stream stop ok
[dms-ts] stream stop ok
@@@@@@@@@@@@ fe_open 1
[dms-ts] stream stop ok
[dms-ts] stream stop ok
[dms-ts] stream stop ok
@@@@@@@@@@@@ fe_open 1
[dms-ts] stream stop ok
[dms-ts] stream stop ok
[dms-ts] stream stop ok
[dms-ts] stream stop ok
[dms-ts] stream stop ok
[dms-ts] stream stop ok
[dms-ts] stream stop ok
@@@@@@@@@@@@ fe_open 0
@@@@@@@@@@@@ fe_open 1
@@@@@@@@@@@@ fe_open 2
@@@@@@@@@@@@ fe_open 3
@@@@@@@@@@@@ fe_open 0
@@@@@@@@@@@@ fe_open 1
[dms-ts] stream stop ok
[dms-ts] stream stop ok
[dms-ts] stream stop ok
[dms-ts] stream stop ok

@perexg
Copy link
Owner

perexg commented Dec 30, 2018

Have you tried to boot without your minisatip8 options? MINISATIP8_OPTS=""

@scho0ck
Copy link
Author

scho0ck commented Dec 30, 2018

Have you tried to boot without your minisatip8 options? MINISATIP8_OPTS=""

Yes that gives me the same error that's why I actually added the OPTS in the hope it would fix my issue.

@perexg
Copy link
Owner

perexg commented Dec 30, 2018 •
edited
Loading

Create /tmp/nosatip file (touch /tmp/nosatip), kill the minisatip task and run minisatip8 from the ssh console:

minisatip8 -f -D 88 -l general,http,stream,adapter,dvb,axe

@scho0ck
Copy link
Author

scho0ck commented Dec 30, 2018 •
edited by perexg
Loading

Okay this is what I'm getting https://pastebin.com/tVus6AHg

Quick edit I've switched to minisatip7 now it seems to work I'll monitor and let you know

@scho0ck
Copy link
Author

scho0ck commented Jan 1, 2019

Minisatip7 is working fine so it seems to be an issue with Minisatip8 if it's only me I'm happy to leave it there and use the slightly older version

@scho0ck scho0ck closed this as completed Jan 1, 2019
@perexg
Copy link
Owner

perexg commented Jan 1, 2019

I would try to determine the minisatip8 issue, because minisatip7 is really unmaintained right now. Could you try to activate the log (like before) and connect the client to the minisatip8? The log is without any activity. Also, put the complete log to http://pastebin.com or to another public place and write only URL here.

@perexg perexg reopened this Jan 1, 2019
@perexg
Copy link
Owner

perexg commented Oct 8, 2019

No response, no support. You may try build 16 anyway: #155 .

@perexg perexg closed this as completed Oct 8, 2019
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@perexg @scho0ck