diff --git a/.github/workflows/lint.yml b/.github/workflows/lint.yml index 1b9a715..404f529 100644 --- a/.github/workflows/lint.yml +++ b/.github/workflows/lint.yml @@ -13,6 +13,8 @@ jobs: steps: - uses: actions/checkout@v4 - uses: actionshub/markdownlint@main + with: + path: ./content stylelint: name: Stylelint diff --git a/.mdl.rb b/.mdl.rb index 5d32cc4..1704e85 100644 --- a/.mdl.rb +++ b/.mdl.rb @@ -1,6 +1,10 @@ # Enable all rules by default all +# Configure a few rules +rule 'MD002', :level => 2 +rule 'MD007', :indent => 2 +rule 'MD026', :punctuation => '.,;:!' # Disable a few rules -exclude_rule 'MD002' -exclude_rule 'MD013' -exclude_rule 'MD041' \ No newline at end of file +exclude_rule 'MD013' # line-length +exclude_rule 'MD034' # bare-url-used ; needed to allow use of URLs in figure shortcode +exclude_rule 'MD041' # first-line-h1 \ No newline at end of file diff --git a/content/_index.en.md b/content/_index.en.md index 9f25a9b..738d9c8 100644 --- a/content/_index.en.md +++ b/content/_index.en.md @@ -1,4 +1,4 @@ -## OpenStreetMap {{< mdl-disable "" >}} +## OpenStreetMap OpenStreetMap is a free, editable map of the whole world that is being built by volunteers largely from scratch and released with an open-content license. diff --git a/content/_index.fr.md b/content/_index.fr.md index 5a20487..fb7ba62 100644 --- a/content/_index.fr.md +++ b/content/_index.fr.md @@ -1,4 +1,4 @@ -## OpenStreetMap {{< mdl-disable "" >}} +## OpenStreetMap OpenStreetMap est (principalement) une carte du monde entier publiée gratuitement sous une licence de contenu libre. Construite par des contributeurs bénévoles, elle est éditable par tous et en constante évolution. diff --git a/content/_index.nl.md b/content/_index.nl.md index d78612a..5132fb9 100644 --- a/content/_index.nl.md +++ b/content/_index.nl.md @@ -1,4 +1,4 @@ -## OpenStreetMap {{< mdl-disable "" >}} +## OpenStreetMap OpenStreetMap is een wereldwijde kaart die door vrijwilligers zoals jou gebouwd wordt. De data wordt gratis en met een open data licentie verdeeld. Het project heeft tot doel deze data in allerlei apps en toepassingen te zien verschijnen. diff --git a/content/posts/2014-11-03-motm-ben-laenen.en.md b/content/posts/2014-11-03-motm-ben-laenen.en.md index 438acd3..e4333ba 100644 --- a/content/posts/2014-11-03-motm-ben-laenen.en.md +++ b/content/posts/2014-11-03-motm-ben-laenen.en.md @@ -23,7 +23,7 @@ Currently, I belong to the category of armchair-mappers, so mainly using aereal In the beginning there was not much choice, we had to start with the roads. After a while, when almost all roads in Antwerp were done, I started mapping bicycle routes and later on walking routes. The latter is especially interesting, you discover new, small paths, which would otherwise remain unknown. More recently, I am working on railway infrastructures, of course influenced by my job. I have been mapping a lot of different things over the years, but never really spend time on mapping points of interest (POIs). -{{< figure src="images/posts/hdyc_eimai.png" link="http://hdyc.neis-one.org/?Eimai" >}}{{< mdl-disable "" >}} +{{< figure src="images/posts/hdyc_eimai.png" link="http://hdyc.neis-one.org/?Eimai" >}} **Why do you map? What motivates you?** @@ -43,7 +43,7 @@ The greatest strength is also one of its greatest weaknesses: the freedom you ha **What are the biggest challenges for OpenStreetMap?** -The first challenge is to keep the data up-to-date. As a mapper you need to notice that something changes in a street before you can update it on OpenStreetMap. The possibility to add notes on is a nice new tool to allow people, who are not into mapping, to point out changes. However, several blind spots where no one takes care of the necessary updates, they do exist. The second challenge, as already hinted in the previous question, is the issue about how we can come to a world-wide consistent way of mapping. +The first challenge is to keep the data up-to-date. As a mapper you need to notice that something changes in a street before you can update it on OpenStreetMap. The possibility to add notes on is a nice new tool to allow people, who are not into mapping, to point out changes. However, several blind spots where no one takes care of the necessary updates, they do exist. The second challenge, as already hinted in the previous question, is the issue about how we can come to a world-wide consistent way of mapping. **To conclude, is there something else you want to share with the readers?** diff --git a/content/posts/2014-11-03-motm-ben-laenen.fr.md b/content/posts/2014-11-03-motm-ben-laenen.fr.md index 1658894..e63b375 100644 --- a/content/posts/2014-11-03-motm-ben-laenen.fr.md +++ b/content/posts/2014-11-03-motm-ben-laenen.fr.md @@ -27,7 +27,7 @@ Actuellement je suis plus un contributeur à distance. J'utilise donc principale Au début, il n'y avait pas le choix, nous devions cartographier les routes. Après un petit temps, quand toutes les routes d'Anvers était cartographiées, j'ai commencé à cartographier les itinéraires cyclables et ensuite les itinéraires pédestres. Pour ces derniers, ça était très intéressant de découvrir des petits chemins que sans cette expérience je n'aurais jamais connus. Récemment, je travaille sur les infrastructures ferroviaires, qui est en rapport avec mon travail. J'ai cartographié beaucoup de choses depuis mes débuts, mais je n'ai jamais passé de temps à renseigner les points d'intérêt. -{{< figure src="images/posts/hdyc_eimai.png" link="http://hdyc.neis-one.org/?Eimai" >}}{{< mdl-disable "" >}} +{{< figure src="images/posts/hdyc_eimai.png" link="http://hdyc.neis-one.org/?Eimai" >}} **Qu'est ce qui vous motive pour cartographier ?** @@ -47,7 +47,7 @@ C'est également un de ses points faibles: la liberté permise lors de la contri **Et quel est notre plus grand défi ?** -Le premier défi est de tenir à jour les données. Avant de mettre à jour une donnée, il faut que le contributeur soit au courant du changement. La possibilité d'ajouter des notes sur est certainement un bon outil qui permet à des utilisateurs qui ne sont pas intéressés de cartographier d'apporter leur pierre à l'édifice en signalant des changements. Mais il y a certainement de nombreux angles morts sur la carte où les mises à jour nécessaires n'ont pas lieu. Le deuxième défi se trouve déjà dans la réponse de la question précédente: comment cartographier de manière cohérente avec des personnes du monde entier (même d'un seul pays)? +Le premier défi est de tenir à jour les données. Avant de mettre à jour une donnée, il faut que le contributeur soit au courant du changement. La possibilité d'ajouter des notes sur est certainement un bon outil qui permet à des utilisateurs qui ne sont pas intéressés de cartographier d'apporter leur pierre à l'édifice en signalant des changements. Mais il y a certainement de nombreux angles morts sur la carte où les mises à jour nécessaires n'ont pas lieu. Le deuxième défi se trouve déjà dans la réponse de la question précédente: comment cartographier de manière cohérente avec des personnes du monde entier (même d'un seul pays)? **Encore une dernière conclusion ?** diff --git a/content/posts/2014-11-03-motm-ben-laenen.nl.md b/content/posts/2014-11-03-motm-ben-laenen.nl.md index d6dd503..bf1c7a9 100644 --- a/content/posts/2014-11-03-motm-ben-laenen.nl.md +++ b/content/posts/2014-11-03-motm-ben-laenen.nl.md @@ -25,7 +25,7 @@ Tegenwoordig val ik meestal onder de categorie van "armchairmappers". Dit wil ze In de begindagen was er weinig keuze wat je moest mappen. Eerst moesten alle wegen aan de beurt komen. Na een tijdje, toen er in het Antwerpse niet zo veel wegen meer te vinden waren, heb ik me toegelegd op fietsroutes en vervolgens wandelroutes. Vooral dat laatste is interessant, je komt kleine paadjes tegen die je anders nooit zou vinden! De laatste tijd houd ik me, vanwege mijn beroep natuurlijk, vaak bezig met de spoorinfrastructuur. Over al die jaren heb ik me met vele verschillende dingen beziggehouden, al hield ik mij nooit echt bezig met het mappen van points of interests (POIs). -{{< figure src="images/posts/hdyc_eimai.png" link="http://hdyc.neis-one.org/?Eimai" >}}{{< mdl-disable "" >}} +{{< figure src="images/posts/hdyc_eimai.png" link="http://hdyc.neis-one.org/?Eimai" >}} **Wat motiveert je om te mappen?** diff --git a/content/posts/2015-01-01-motm-guy-roman.en.md b/content/posts/2015-01-01-motm-guy-roman.en.md index 8e68244..6354d52 100644 --- a/content/posts/2015-01-01-motm-guy-roman.en.md +++ b/content/posts/2015-01-01-motm-guy-roman.en.md @@ -19,7 +19,7 @@ I mainly use the aerial images from Bing, but I combine this with the available **Why do you map?** It is fun, and it allows me to explore the world without leaving my house! -{{< figure src="images/posts/hdyc_Roman_Guy.png" link="http://hdyc.neis-one.org/?Roman%20Guy" >}}{{< mdl-disable "" >}} +{{< figure src="images/posts/hdyc_Roman_Guy.png" link="http://hdyc.neis-one.org/?Roman%20Guy" >}} **Do you do other things related to OpenStreetMap?** I try to convince possible "passive" users to use OpenStreetMap, such as organisers of hiking trips. diff --git a/content/posts/2015-01-01-motm-guy-roman.fr.md b/content/posts/2015-01-01-motm-guy-roman.fr.md index d564d09..233522a 100644 --- a/content/posts/2015-01-01-motm-guy-roman.fr.md +++ b/content/posts/2015-01-01-motm-guy-roman.fr.md @@ -5,7 +5,7 @@ cover: Roman_Guy.jpg categories: ["motm"] --- -_Depuis 5 ans [Guy Roman](http://www.openstreetmap.org/user/Roman%20Guy) est retraité. Avant Guy était technicien électricien dans un bureau d'étude. Il travaillait surtout sur projets portant sur la distribution d'énergie et l'automation, ... donc il "faisait déjà des dessins" quand il travaillait..._ +_Depuis 5 ans [Guy Roman](http://www.openstreetmap.org/user/Roman%20Guy) est retraité. Avant Guy était technicien électricien dans un bureau d'étude. Il travaillait surtout sur projets portant sur la distribution d'énergie et l'automation, ... donc il "faisait déjà des dessins" quand il travaillait._ **Comment et quand avez-vous découvert OpenStreetMap ?** J'ai découvert OpenStreetMap par hasard, en 2008. @@ -22,7 +22,7 @@ Par plaisir, je voyage sans quitter mon salon ! **Faites-vous d'autres choses liées à OpenStreetMap?** J'essaye de proposer les cartes OpenStreetMap à des utilisateurs "passifs", comme des organisateurs de courses à pied et des organisateurs de promenades. -{{< figure src="images/posts/hdyc_Roman_Guy.png" link="http://hdyc.neis-one.org/?Roman%20Guy" >}}{{< mdl-disable "" >}} +{{< figure src="images/posts/hdyc_Roman_Guy.png" link="http://hdyc.neis-one.org/?Roman%20Guy" >}} **Avez-vous des idées pour améliorer OpenStreetMap ?** Pour certains détails le rendu général d'OpenStreetMap pourrait être améliorée. C'est par exemple le cas pour [landuse "pierrier"](http://wiki.openstreetmap.org/wiki/Tag:natural%3Dscree), l'étendue de cailloux en montagne, en bords de certaines rivières,... Il suffirait de prendre le rendu de "plage",... et de changer la couleur en gris. Une autre exemple est : faire passer un ruisseau sur un pont. Aujourd'hui c'est possible pour un canal, mais pas pour un ruisseau. Malheureusement on rentre là dans un domaine que je ne maîtrise pas. diff --git a/content/posts/2015-01-01-motm-guy-roman.nl.md b/content/posts/2015-01-01-motm-guy-roman.nl.md index ac20dee..2a799f3 100644 --- a/content/posts/2015-01-01-motm-guy-roman.nl.md +++ b/content/posts/2015-01-01-motm-guy-roman.nl.md @@ -22,7 +22,7 @@ Voor mijn plezier, ik verken de wereld te verkennen zonder mijn huis te verlaten **Doe je ook nog andere dingen in verband met OpenStreetMap?** Ik probeer mogelijke passieve gebruikers van OpenStreetMap te overtuigen, zoals mensen die loopwedstrijden of wandeltochten organiseren. -{{< figure src="images/posts/hdyc_Roman_Guy.png" link="http://hdyc.neis-one.org/?Roman%20Guy" >}}{{< mdl-disable "" >}} +{{< figure src="images/posts/hdyc_Roman_Guy.png" link="http://hdyc.neis-one.org/?Roman%20Guy" >}} **Hoe kan OpenStreetMap nog verbeteren volgens jou?** Ik hoop dat de standaardkaart op OpenStreetMap nog op een aantal vlakken verbetert. Een voorbeeld zijn [steenslag-gebieden](http://wiki.openstreetmap.org/wiki/Tag:natural%3Dscree), zoals je die vindt naast bergrivieren. Het zou bijvoorbeeld mooi zijn moesten die op een gelijkaardige manier als stranden getekend worden op de kaart, maar dan wel in het grijs. Het zou ook mooi zijn moesten beekjes die over een brug lopen zichtbaar zijn op de kaart. Momenteel worden enkel kanalen over bruggen getekend. Jammer genoeg heb ik niet genoeg kennis op dit ogenblik om dit zelf te verbeteren. diff --git a/content/posts/2015-03-20-motm-pierre-parmentier.en.md b/content/posts/2015-03-20-motm-pierre-parmentier.en.md index 5f7a09f..d7f0482 100644 --- a/content/posts/2015-03-20-motm-pierre-parmentier.en.md +++ b/content/posts/2015-03-20-motm-pierre-parmentier.en.md @@ -23,7 +23,7 @@ I am a rather isolated contributor. I never had the opportunity to attend a mapp I work mostly on basic data like highways, buildings, the UrbIS import, addresses and shops. Occasionally, I added roadside trees, hydrants, [AED](http://nl.wikipedia.org/wiki/Automatische_externe_defibrillator), pedestrian crossings, post boxes. -{{< figure src="images/posts/foxandpotatoes_hdyc.png" link="https://www.openstreetmap.org/user/foxandpotatoes" >}}{{< mdl-disable "" >}} +{{< figure src="images/posts/foxandpotatoes_hdyc.png" link="https://www.openstreetmap.org/user/foxandpotatoes" >}} **Why do you map?** diff --git a/content/posts/2015-03-20-motm-pierre-parmentier.fr.md b/content/posts/2015-03-20-motm-pierre-parmentier.fr.md index a9c69dc..ae8a996 100644 --- a/content/posts/2015-03-20-motm-pierre-parmentier.fr.md +++ b/content/posts/2015-03-20-motm-pierre-parmentier.fr.md @@ -27,7 +27,7 @@ Je travaille surtout sur les données basiques (highways, buildings, import UrbI Aucune prouesse. On est comme des fourmis et chaque contributeur ajoute son petit morceau à l'édifice. Et chaque contribution mérite le respect ! -{{< figure src="images/posts/foxandpotatoes_hdyc.png" link="https://www.openstreetmap.org/user/foxandpotatoes" >}}{{< mdl-disable "" >}} +{{< figure src="images/posts/foxandpotatoes_hdyc.png" link="https://www.openstreetmap.org/user/foxandpotatoes" >}} **Pourquoi cartographiez-vous? Qu'est ce qui vous motive ?** diff --git a/content/posts/2015-03-20-motm-pierre-parmentier.nl.md b/content/posts/2015-03-20-motm-pierre-parmentier.nl.md index c288f8f..d031ce7 100644 --- a/content/posts/2015-03-20-motm-pierre-parmentier.nl.md +++ b/content/posts/2015-03-20-motm-pierre-parmentier.nl.md @@ -31,7 +31,7 @@ Niets in het bijzonder. We zijn zoals mieren en iedereen draagt zijn klein deelt Wat me motiveert is de passie voor kaarten, en het verlangen om het landschap en mijn omgeving beter te begrijpen. Als ik een beboste helling zie, denk ik onmiddellijk aan een spoorweg die er achter zou kunnen passeren. Door te mappen stellen we ons vele vragen i.v.m. geschiedenis, geografie en verschillende betekenissen. Dat is wat mij interesseert! Maar ook de deelname aan een waardevol project vind ik belangrijk. -{{< figure src="images/posts/foxandpotatoes_hdyc.png" link="https://www.openstreetmap.org/user/foxandpotatoes" >}}{{< mdl-disable "" >}} +{{< figure src="images/posts/foxandpotatoes_hdyc.png" link="https://www.openstreetmap.org/user/foxandpotatoes" >}} **Heb je ideeën over hoe we de OpenStreetMap-gemeenschap kunnen uitbreiden?** diff --git a/content/posts/2015-09-30-motm-vincent-van-eyken.en.md b/content/posts/2015-09-30-motm-vincent-van-eyken.en.md index 7db86d7..b2b9250 100644 --- a/content/posts/2015-09-30-motm-vincent-van-eyken.en.md +++ b/content/posts/2015-09-30-motm-vincent-van-eyken.en.md @@ -8,7 +8,7 @@ categories: ["motm"] [Vincent Van Eyken](http://www.openstreetmap.org/user/QuercE) recently got his civil engineering degree, specialism architecture. With this background, it is not surprising that he has an healthy interest in topics such as urban planning and public space landscaping. But he also has a long lasting and strong passion for geography and cartography. Therefore it is almost natural that he ended up in the OpenStreetMap world. He maps under the nickname [QuercE](http://www.hdyc.neis-one.org/?QuercE), which is derived from the Latin translation of his family name; 'quercus' (adj. 'querceus') is latin for 'eik(en) / eyken'. Eik is the Dutch word for oak. -{{< figure src="https://xian.smugmug.com/OSM/Screenshots/Mapper-of-the-Month/i-zn5cHvt/0/O/DSCN7232.jpg" alt="Vincent" >}}{{< mdl-disable "" >}} +{{< figure src="https://xian.smugmug.com/OSM/Screenshots/Mapper-of-the-Month/i-zn5cHvt/0/O/DSCN7232.jpg" alt="Vincent" >}} ## When did you start contributing? diff --git a/content/posts/2015-10-29-motm-clifford-snow.en.md b/content/posts/2015-10-29-motm-clifford-snow.en.md index 49e1988..5162831 100644 --- a/content/posts/2015-10-29-motm-clifford-snow.en.md +++ b/content/posts/2015-10-29-motm-clifford-snow.en.md @@ -6,7 +6,7 @@ categories: ["motm"] We have been interviewing Belgian mappers for a year now.Since westill like the concept, [Marc](http://www.openstreetmap.org/user/escada) took the initiativeto extend it outside our little Belgian communit. From time to time hewill interview amapperfrom somewhere inthe world. He hascompiled a list of 30 mappers (for now) of people that hemet on different mailing lists and fora. And from time to time hewill contact one andask her or him to answer a few questions. The focus will be on indivudual mappers, unlike the very interesting interviews conducted by [OpenCage](http://blog.opencagedata.com), that focus more on developers and country profiles. -{{< figure src="https://xian.smugmug.com/OSM/Screenshots/Mapper-of-the-Month/i-RNzmH28/0/O/P1020795_1024.jpg" >}}{{< mdl-disable "" >}} +{{< figure src="https://xian.smugmug.com/OSM/Screenshots/Mapper-of-the-Month/i-RNzmH28/0/O/P1020795_1024.jpg" >}} Marc his first victim is Clifford Snow, hemet him on the talk-us mailing list and exchanged a few ideas about a presentation on OSM earlier this year with him. diff --git a/content/posts/2016-01-01-motm-polyglot.en.md b/content/posts/2016-01-01-motm-polyglot.en.md index 36fd055..a742964 100644 --- a/content/posts/2016-01-01-motm-polyglot.en.md +++ b/content/posts/2016-01-01-motm-polyglot.en.md @@ -12,7 +12,7 @@ Apparently, it's been eight years already. I wanted to give something back to th OpenStreetMap had the advantage that, on the one hand, it's an outdoor activity, and on the other hand you get to use a computer in interesting ways. Every time you enter the surveyed data, you sort of relive the itinerary you followed, which intensifies the experience. Since I discovered Mapillary, my way of mapping/surveying changed again. Taking a huge amount of pictures, which serve as source material, became a goal in itself. I produce so many of them now that it is no longer feasible to process all of the data I collect myself. Before Mapillary I just took pictures of what I was going to add on OpenStreetmap. This process took about the same amount of time as the surveying itself. Nowadays weeding out the failed pictures from the thousands I made is work enough as it is. -{{< figure src="https://upload.wikimedia.org/wikipedia/commons/a/a2/Pad_van_Ad_op_OSM.png" alt="Pad van Ad op OSM" >}}{{< mdl-disable "" >}} +{{< figure src="https://upload.wikimedia.org/wikipedia/commons/a/a2/Pad_van_Ad_op_OSM.png" alt="Pad van Ad op OSM" >}} ## Do you use OpenStreetMap yourself? diff --git a/content/posts/2016-04-22-motm-stijn-rombauts.en.md b/content/posts/2016-04-22-motm-stijn-rombauts.en.md index 9ffd5bb..4269a1e 100644 --- a/content/posts/2016-04-22-motm-stijn-rombauts.en.md +++ b/content/posts/2016-04-22-motm-stijn-rombauts.en.md @@ -6,7 +6,7 @@ author: escada [Stijn Rombauts](http://www.openstreetmap.org/user/StijnRR) is a 37 year old bio-engineer who works for the [Flanders Enviroment Agency](https://en.vmm.be/), where he builds and maintains computermodels of streams and rivers. Those models are used to predict floods and to plan of e.g. fish steps and waiting basins. Because he spends a lot of time in front of the computer for his job, he tries to be active, in the nature, during his spare time: be it on foot, with the mountain bike or in a canoe. -{{< figure src="https://xian.smugmug.com/OSM/Screenshots/Mapper-of-the-Month/i-wmQ4JKS/0/X2/P7110059-X2.jpg" alt="Stijn Rombauts" >}}{{< mdl-disable "" >}} +{{< figure src="https://xian.smugmug.com/OSM/Screenshots/Mapper-of-the-Month/i-wmQ4JKS/0/X2/P7110059-X2.jpg" alt="Stijn Rombauts" >}} ## How and when did you discover OpenStreetMap? @@ -26,7 +26,7 @@ When I just started, the focus was on field roads and forest paths. After awhile I only add small building blocks in several different places to the impressive OpenStreetMap-castle. But in the meantime it seems that I have added or checked almost 300 walking routes. -{{< figure src="https://xian.smugmug.com/OSM/Screenshots/Mapper-of-the-Month/i-gBvV7BC/0/X3/StijnRR-X3.png" title="Stijn's Achivements" link="http://www.hdyc.neis-one.org/?StijnRR" >}}{{< mdl-disable "" >}} +{{< figure src="https://xian.smugmug.com/OSM/Screenshots/Mapper-of-the-Month/i-gBvV7BC/0/X3/StijnRR-X3.png" title="Stijn's Achivements" link="http://www.hdyc.neis-one.org/?StijnRR" >}} ## Why do you map? What motivates you? diff --git a/content/posts/2016-05-15-motm-pete-masters.en.md b/content/posts/2016-05-15-motm-pete-masters.en.md index ef97539..89beef2 100644 --- a/content/posts/2016-05-15-motm-pete-masters.en.md +++ b/content/posts/2016-05-15-motm-pete-masters.en.md @@ -6,7 +6,7 @@ author: escada ## Q: Who are you? -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Pete-Masters/i-7KFHtqX/0/O/20150410_082105.jpg" alt="Pete Masters" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Pete-Masters/i-7KFHtqX/0/O/20150410_082105.jpg" alt="Pete Masters" >}} I am Pete Masters (OSM: [pedrito1414](http://www.openstreetmap.org/user/pedrito1414) - a hangover from my time living in Mexico). I live in [Glasgow](http://www.openstreetmap.org/relation/1906767) and work for [MSF](http://www.msf.org/), running the [Missing Maps project](http://www.missingmaps.org/). I am a fairly rubbish climber, a regular footballer and get out to the lochs and mountains as much as possible. @@ -24,7 +24,7 @@ In the field for MSF, I use [OpenDataKit](https://opendatakit.org/), OsmAnd, [fi ## Q: Where do you map? Locally, HOT? -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Pete-Masters/i-6MTFDV9/0/XL/pedrito1414-XL.png" link="http://www.hdyc.neis-one.org/?pedrito1414" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Pete-Masters/i-6MTFDV9/0/XL/pedrito1414-XL.png" link="http://www.hdyc.neis-one.org/?pedrito1414" >}} A little bit locally, but mostly in the field. @@ -32,7 +32,7 @@ A little bit locally, but mostly in the field. I have mapped in [Congo (DRC)](http://www.openstreetmap.org/relation/192795#map=5/-4.089/21.672), [Central African Republic](http://www.openstreetmap.org/relation/192790), [Bangladesh](http://www.openstreetmap.org/relation/184640), amongst others, but the experience of Bangladesh was pretty special. Working with [Jorieke Vyncke](http://www.openstreetmap.org/user/Jorieke%20V) and incredible [OSM Bangladesh community](https://www.facebook.com/groups/osmbd/) was an absolute pleasure. We worked hard, we had a lot of fun and we did the job that MSF needed us to do. Very proud of that. Also, massively proud of the heights that OSM Bangladesh have since reached - I'm a big fan ;) -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Pete-Masters/i-7R9V7mV/0/O/24699278496_c34e33de10_o.jpg" title="With the uni of Lubumbashi guys in Congo" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Pete-Masters/i-7R9V7mV/0/O/24699278496_c34e33de10_o.jpg" title="With the uni of Lubumbashi guys in Congo" >}} ## Q: Why do yo map? What motivates you? @@ -42,7 +42,7 @@ I have worked for MSF for a long time now and love the organisation. That I can For me, it's not the mapping - it's the organising. Trying to make sure that data quality stays consistently high, while at the same time bringing in new people to OSM and HOT is a huge challenge. We are getting better, but there is a long way to go and I welcome ideas that anyone might have.... -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Pete-Masters/i-dqnHqWq/0/O/20150119_121509.jpg" link="http://www.hdyc.neis-one.org/?pedrito1414" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Pete-Masters/i-dqnHqWq/0/O/20150119_121509.jpg" link="http://www.hdyc.neis-one.org/?pedrito1414" >}} ## Q: What are your mapping plans for the near future? @@ -70,7 +70,7 @@ I still love to use paper [Ordnance Survey](https://www.ordnancesurvey.co.uk) ma ## Q: To conclude, is there anything else you want to mention? -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Pete-Masters/i-ZNx3FKF/0/O/20150408_085901.jpg" link="http://www.hdyc.neis-one.org/?pedrito1414" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Pete-Masters/i-ZNx3FKF/0/O/20150408_085901.jpg" link="http://www.hdyc.neis-one.org/?pedrito1414" >}} Just to say that this last couple of year's immersion in OSM and HOT has been an education, an experience and a pleasure. Long may it continue! diff --git a/content/posts/2016-08-20-motm-jorieke-vyncke.en.md b/content/posts/2016-08-20-motm-jorieke-vyncke.en.md index f98c8f6..c31697d 100644 --- a/content/posts/2016-08-20-motm-jorieke-vyncke.en.md +++ b/content/posts/2016-08-20-motm-jorieke-vyncke.en.md @@ -7,7 +7,7 @@ author: Marc Gemis [Jorieke](http://www.openstreetmap.org/user/Jorieke%20V), a 28 years old Belgian, has spend a lot of time the past few years to support local OpenStreetMap communities all over the world. She worked on several projects in Africa, Europe and Asia to train people and to promote OpenStreetMap by local and international players. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jorieke-Vyncke/i-6b3swBq/0/X2/Mapfugees%20in%20Duinkerke-X2.jpg" title="Jorieke at the Mapfugees in Duinkerke" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jorieke-Vyncke/i-6b3swBq/0/X2/Mapfugees%20in%20Duinkerke-X2.jpg" title="Jorieke at the Mapfugees in Duinkerke" >}} ## Where and when did you discover OpenStreetMap? @@ -24,7 +24,7 @@ Besides this personal use, I also often use OpenStreetMap for my work. For examp I was very gratefull for HOT's [Ebola activation](https://hotosm.org/projects/west_africa_ebola_epidemic)! The western part of the Côte d'Ivoire is about perfect! With a few corrections by people that knew the region very well, we got the logistics running smoothly. Other parts of the country were harder, driving around for 40 kilometers to get in that particular village, was not uncommon. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jorieke-Vyncke/i-CnbCsB7/0/XL/GisDay%202015%20met%20OpenStreetMap%20Mali-XL.jpg" title="GisDay 2015 met OpenStreetMap Mali" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jorieke-Vyncke/i-CnbCsB7/0/XL/GisDay%202015%20met%20OpenStreetMap%20Mali-XL.jpg" title="GisDay 2015 met OpenStreetMap Mali" >}} ## How and where do you map? @@ -40,7 +40,7 @@ At this moment there is a map of Bangui, which includes all health facilities an I am also very proud of the week I spend in [Lubumbashi](http://www.openstreetmap.org/node/27564973) with [Medecins Sans Frontiers](http://www.msf.org/) (MSF): . Although I did not map a lot myself during that period, I instructed people to map for me :-) At the end of the week, around 15 students were walking around to collect data and we got tremendous help from remote mappers. After 4 days more than 60 people from around the world helped us. This synergy with Ivan Gayton of MSF, myself and the students in the field and the remote mappers, was the first seed from which the [Missing Maps](http://www.missingmaps.org/) projects was born a few months later. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jorieke-Vyncke/i-Q7G9CLW/0/XL/Dataverzameling%20in%20Bangui-XL.jpg" title="Data collection in Bangui" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jorieke-Vyncke/i-Q7G9CLW/0/XL/Dataverzameling%20in%20Bangui-XL.jpg" title="Data collection in Bangui" >}} ## What is your motivation to map? diff --git a/content/posts/2016-10-14-motm-sus-verhoeven.en.md b/content/posts/2016-10-14-motm-sus-verhoeven.en.md index ab32912..2d16037 100644 --- a/content/posts/2016-10-14-motm-sus-verhoeven.en.md +++ b/content/posts/2016-10-14-motm-sus-verhoeven.en.md @@ -11,7 +11,7 @@ Sus is my computer related nickname, on OpenStreetmap I use susvhv. In the early I was born in 1933, (I leave it to you to calculate my age) in Brussels and I was a technician at the [Belgian Nuclear Research Center](https://www.sckcen.be/en) or SCK in [Mol](http://www.openstreetmap.org/relation/1263864), where I live at the moment. I was sent on early retirement during a restructuring at the SCK. I have been enjoying home life for over 25 years since that moment. When I went to school, there were no computers. Luckily, I got the opportunity at work to spend time to learn about hardware and software and get familiar with microprocessors and microcontrollers. Until now, I have bought all my desktop computers as parts and assembled them myself. The last one runs [Ubuntu](https://www.ubuntu.com/). My laptop runs Windows 10. Unlike the desktops, I buy my laptops. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Susvhv/i-5D5bLqV/0/X2/DSC_0548-X2.jpg" alt="Sus" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Susvhv/i-5D5bLqV/0/X2/DSC_0548-X2.jpg" alt="Sus" >}} The hardware for the development for microprocessors we used at work was very expensive in the early days. A few years after my retirement, I noticed that a microcontroller, such as the [ATMEGA8](https://en.wikipedia.org/wiki/Atmel_AVR) costed only a few euros and they were freely programmable from the serial port (now from USB) of a PC. Today, in the Internet of Things area, one can program [Arduino](https://www.arduino.cc/) computers with Wifi modules ([Nodemcu](http://www.nodemcu.com/index_en.html), ESP8266) to control all kinds of peripherals. I have one running that measures the temperature in the veranda and sends the data to the net, from where I can read it. I also have a 1 terabyte [Owncloud](https://owncloud.org/) server running on a [Raspberry Pi](https://www.raspberrypi.org/). You know, those bankcard-sized computers developed for children (smiles) @@ -29,7 +29,7 @@ I have the maps of the whole of Europe on my Garmin Dakota 20 GPS and the Androi ## How do you map? -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Susvhv/i-3VPzRWC/0/X2/DSC_0223-X2.jpg" alt="Luie Zetel" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Susvhv/i-3VPzRWC/0/X2/DSC_0223-X2.jpg" alt="Luie Zetel" >}} The only mapping I do at the moment is from my lazy chair. As editor I only use [JOSM](https://josm.openstreetmap.de/). When JOSM was a memory hog, I switched to other editors, but most problems from the early days are fixed and it contains more and more useful features, a.o. the links to aerial imagery for Flanders. I visited a [Missing Maps](http://www.missingmaps.org/) party in [Antwerp](http://www.openstreetmap.org/relation/59518), and I also "filled a few squares" when [Jorieke](http://www.openstreetmap.org/user/Jorieke%20V) recently asked for help for a [HOT task](http://tasks.hotosm.org/). It took some time to adapt. I sometimes have difficulties to follow the rules, but this does not always help the overall quality of the map. @@ -89,7 +89,7 @@ Years ago, I met [Lodde1949](http://www.openstreetmap.org/user/lodde1949), whil Out of curiosity I once visited a Missing Maps party in Antwerp. I also participated in some hangouts. For the rest I do not have a lot of contact with other mappers. I know some around Mol, but they contribute infrequently. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Susvhv/i-HdJscbx/0/O/Screenshot%202016-10-14%2019.40.48.png" alt="Sus" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Susvhv/i-HdJscbx/0/O/Screenshot%202016-10-14%2019.40.48.png" alt="Sus" >}} [http://www.hdyc.neis-one.org/?susvhv](http://www.hdyc.neis-one.org/?susvhv) diff --git a/content/posts/2017-01-19-motm-steve-all.en.md b/content/posts/2017-01-19-motm-steve-all.en.md index 13e3aff..60f07dc 100644 --- a/content/posts/2017-01-19-motm-steve-all.en.md +++ b/content/posts/2017-01-19-motm-steve-all.en.md @@ -19,7 +19,7 @@ Volunteering in OSM is very important to me: like helping out at a soup kitchen At first, I was keen on completely mapping my little city, my university and my small county. So I did, with great zeal, walking our downtown main streets while scribbling into a notepad every business, bench, wastebasket, tree, fire hydrant, drinking fountain and so on. I coordinated a local landuse import now in its third generation of updated official government data. This turned into bestowing upon [Santa Cruz](http://www.openstreetmap.org/relation/111737) a Gold Star Award, one of just a few places in North America to receive such an accolade — where Santa Cruz is said to have "nearly perfect landuse." Working with staff, faculty, interns, contractors and students at the [University of California Santa Cruz](http://www.openstreetmap.org/way/34572442) and its Transportation Department, OSM became the [campus map](http://maps.ucsc.edu/) and for web and smart-phone apps. This partly followed from my [Tasking Manager "cake map"] () allowing multiple people to select a slice to complete, one college and sub-region of the university at a time. While the cake isn't "all green" yet, it is perhaps 85% - 90% complete. We created legally-compliant wheelchair routes, bicycle and equestrian trails, denoted in OSM which Upper Campus Ecological Area hiking trails were open and closed, imported exact shapefile boundaries of Nature Reserves, named buildings correctly, coordinated a new addressing scheme, put in parking lot details and much more. Not only does the university agree OSM is better than their old maps, one aspect we love is networked data which can be updated in nearly real-time. This allows the campus map to become a fabric shared by everybody, usable and improvable for creative and academic purposes, an especially appealing feature for a university. Indeed, professors have invited me to participate in classes where OSM is a star of the curriculum, one in computer science, another in environmental studies. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Stevea/i-667BvQs/0/O/UCSC.jpg" alt="Cake Map of University of Sant Cruz" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Stevea/i-667BvQs/0/O/UCSC.jpg" alt="Cake Map of University of Sant Cruz" >}} Actively hiking and biking, I mapped (or saw was mapped) every park trail in the county I could. It became a sort of game, filling in the missing pieces: hiking, biking, mapping all together, like a puzzle to finish — now that is fun! I crafted and proposed to our Regional Transportation Commission a local bicycle network numbering protocol called [CycleNet]( https://www.openstreetmap.org/#map=12/37/-122&layers=C) modeled on San Francisco's and our national United States Bicycle Route System (USBRS). I entered into OSM both CycleNet and a good portion of the USBRS, an [OSM WikiProject]( https://wiki.openstreetmap.org/wiki/WikiProject_U.S._Bicycle_Route_System) I coordinate. I spoke on this topic at SOTM-US in Washington, DC in 2014. @@ -27,7 +27,7 @@ As OSM documents USBRS' robust growth, I saw USA rail infrastructure and passeng other: now, OSM is more grown-up in many good ways. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Stevea/i-FvRzHQz/0/O/Screenshot%202017-01-19%2018.04.19.png" alt="OpenRailwayMap" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Stevea/i-FvRzHQz/0/O/Screenshot%202017-01-19%2018.04.19.png" alt="OpenRailwayMap" >}} ## How do you map? Do you make surveys? Are you an armchair mapper? diff --git a/content/posts/2017-03-17-motm-lauri-kytomaa.en.md b/content/posts/2017-03-17-motm-lauri-kytomaa.en.md index 344579d..dcb3eea 100644 --- a/content/posts/2017-03-17-motm-lauri-kytomaa.en.md +++ b/content/posts/2017-03-17-motm-lauri-kytomaa.en.md @@ -4,7 +4,7 @@ categories: ["motm"] author: escada --- -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Lauri-Kytömaa/i-9P9QfLW/0/O/osmheatmapalv.png" alt="Lauri's Heatmap" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Lauri-Kytömaa/i-9P9QfLW/0/O/osmheatmapalv.png" alt="Lauri's Heatmap" >}} ## When and how did you discover OpenStreetMap? diff --git a/content/posts/2017-04-21-post-survey.en.md b/content/posts/2017-04-21-post-survey.en.md index 5cfbd89..8f4f818 100644 --- a/content/posts/2017-04-21-post-survey.en.md +++ b/content/posts/2017-04-21-post-survey.en.md @@ -11,7 +11,7 @@ I have been conducting surveys for the past 6 years. Every weekend I take the do One of the benefits of having the dogs with me, is that I was never stopped and questioned about my activities, unlike some other mappers. -{{< figure src="https://photos.smugmug.com/Our-Dogs/Fun-2017/Vanalles/i-bZz8R54/0/L/20170407_192229-L.jpg" title="Our Dogs, the one in the middle is still an apprentice, the two on the outside already accompany me for 6 years of surveying." >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/Our-Dogs/Fun-2017/Vanalles/i-bZz8R54/0/L/20170407_192229-L.jpg" title="Our Dogs, the one in the middle is still an apprentice, the two on the outside already accompany me for 6 years of surveying." >}} ## Equipment @@ -19,7 +19,7 @@ Lets start by listing the gadgets I use to collect data. My choice is largely i Now the actual equipment: -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Survey-Article/i-mNsG5c2/0/M/IMG_0225-M.jpg" title="Garmin Dakota 10, Nikon D7100, LG G3s" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Survey-Article/i-mNsG5c2/0/M/IMG_0225-M.jpg" title="Garmin Dakota 10, Nikon D7100, LG G3s" >}} ### Garmin Dakota 10 @@ -43,7 +43,7 @@ A drawback for some might be that the camera has no build in GPS, so the photos I run the navigation app [OsmAnd](http://osmand.net/) on my smartphone, an LG G3s. I place the smartphone in a holder that I can tie around my forearm. This allows me to consult the screen without using my hands. The plastic of the holder make it harder to read in certain light conditions though. In order to keep the rotation of the map stable, even when I move my arm, I use the [RotationControl](https://play.google.com/store/apps/details?id=org.crape.rotationcontrol) app. -{{< figure src="https://photos.smugmug.com/OSM/OSM-2016/2016-06-18-Drongengoedbos/i-4nRLcjc/0/L/DSC_3896-L.jpg" alt="SmartPhone in holder" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/OSM-2016/2016-06-18-Drongengoedbos/i-4nRLcjc/0/L/DSC_3896-L.jpg" alt="SmartPhone in holder" >}} OsmAnd is used as the main navigation aid and to track my walks. So at the end I have 2 tracks, one from the Garmin and one from OsmAnd. @@ -88,9 +88,7 @@ Let's take a detailed look at each of those steps. The Dutch Wikipedia lists all immovable heritage in Flanders, grouped per village. For large towns, there might be multiple pages. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Survey-Article/i-DHjHCwZ/0/M/Screen%20Shot%202017-04-08%20at%2021.05.00-M.png" alt="List of unmovable heritage in Rumst on Wikipedia" >}}{{< mdl-disable "" >}} - -*List of immovable heritage in [Rumst on Wikipedia](https://nl.wikipedia.org/wiki/Lijst_van_onroerend_erfgoed_in_Rumst)* +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Survey-Article/i-DHjHCwZ/0/M/Screen%20Shot%202017-04-08%20at%2021.05.00-M.png" alt="List of unmovable heritage in Rumst on Wikipedia" >}} Each line typically contains the name or description of the item, an address, the (part) village the coordinates and an image. Lines without coordinates are useless for our purpose. @@ -109,7 +107,7 @@ This gpx-file contains 1 waypoint per row in the html-file. An excerpt from that for those two lines of the Wikipedia page: -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Survey-Article/i-ZBKqnDX/0/M/Screen%20Shot%202017-04-08%20at%2021.30.10-M.png" alt="2 heritage items in Rumst" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Survey-Article/i-ZBKqnDX/0/M/Screen%20Shot%202017-04-08%20at%2021.30.10-M.png" alt="2 heritage items in Rumst" >}} the generated waypoints are @@ -142,21 +140,21 @@ The Python script has a few limitations which makes it unsuitable for a fully au I place the places with the GPX-trace for the route and the waypoints for the immovable heritage in the tracks folder of OsmAnd. The path depends on the version of OsmAnd you are running and how you configured it. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Survey-Article/i-Jr782Gh/0/L/Screen%20Shot%202017-04-09%20at%2010.34.00-L.png" alt="Bluetooth File Exchange on OSX" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Survey-Article/i-Jr782Gh/0/L/Screen%20Shot%202017-04-09%20at%2010.34.00-L.png" alt="Bluetooth File Exchange on OSX" >}} Now I can toggle the display of those files via the OsmAnd UI. This is done as follows: 1) In the menu, choose "Configure Map" -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Survey-Article/i-FG8C3LK/1/L/Screenshot_2017-04-09-10-37-14-L.jpg" alt="Configure Map" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Survey-Article/i-FG8C3LK/1/L/Screenshot_2017-04-09-10-37-14-L.jpg" alt="Configure Map" >}} 1) Then "GPX Track..." -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Survey-Article/i-tFcQNdL/1/L/Screenshot_2017-04-09-10-37-38-L.jpg" alt="GPX Track" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Survey-Article/i-tFcQNdL/1/L/Screenshot_2017-04-09-10-37-38-L.jpg" alt="GPX Track" >}} 1) Then enable your GPX-trace and one or more files with waypoints -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Survey-Article/i-836xGkV/0/L/Screenshot_2017-04-09-10-37-52-L.png" alt="Waypoint files" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Survey-Article/i-836xGkV/0/L/Screenshot_2017-04-09-10-37-52-L.png" alt="Waypoint files" >}} 1) Press ok @@ -164,11 +162,11 @@ return back to your map, et voilà, the trace of the route and all immovable her The thick red line represents the route to follow, the red circles with white stars, the heritage items. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Survey-Article/i-586q3RT/0/L/Screenshot_2017-04-09-10-38-38-L.png" alt="OsmAnd Map" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Survey-Article/i-586q3RT/0/L/Screenshot_2017-04-09-10-38-38-L.png" alt="OsmAnd Map" >}} Clicking one of the circles, shows the detailed information on the heritage item -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Survey-Article/i-zKrFhXc/0/L/Screenshot_2017-04-09-10-38-55-L.png" alt="Detail info heritage item" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Survey-Article/i-zKrFhXc/0/L/Screenshot_2017-04-09-10-38-55-L.png" alt="Detail info heritage item" >}} ## Starting the Survey @@ -190,7 +188,7 @@ Back home, I download the photos to my laptop. Also the traces from the Garmen a In order to assign the location to the images, I use [geotag](http://geotag.sourceforge.net/), this is a Java application and can run on all platforms. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Survey-Article/i-KR7k4SR/0/L/Screen%20Shot%202017-04-16%20at%2019.57.30-L.png" alt="Geotag" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Survey-Article/i-KR7k4SR/0/L/Screen%20Shot%202017-04-16%20at%2019.57.30-L.png" alt="Geotag" >}} I first load all images and the trace made by the Garmin. I select the first picture made during the survey and set the time of the SYNC waypoint. This corrects the time recorded by the camera to the one recorded by the Garmin. Now I can let the program calculate the coordinates for each image. diff --git a/content/posts/2017-05-19-motm-marek-kleciak.en.md b/content/posts/2017-05-19-motm-marek-kleciak.en.md index 8f4df56..97244cd 100644 --- a/content/posts/2017-05-19-motm-marek-kleciak.en.md +++ b/content/posts/2017-05-19-motm-marek-kleciak.en.md @@ -4,7 +4,7 @@ categories: ["motm"] author: escada --- -{{< figure src="https://www.openstreetmap.org/attachments/users/images/000/338/611/large/bc2dcb86cd4ba99f45ed526e755a8014.jpg" alt="Marek Kleciak" >}}{{< mdl-disable "" >}} +{{< figure src="https://www.openstreetmap.org/attachments/users/images/000/338/611/large/bc2dcb86cd4ba99f45ed526e755a8014.jpg" alt="Marek Kleciak" >}} ## Who are you? @@ -30,7 +30,7 @@ In the beginning I did some surveys but because of my professional and family du For mapping: I use [JOSM](josm.openstreetmap.de), [Potlatch2](https://wiki.openstreetmap.org/wiki/Potlatch_2), [OsmAnd](https://wiki.openstreetmap.org/wiki/Potlatch_2), a digital camera and [Field papers](https://wiki.openstreetmap.org/wiki/Potlatch_2). For Q&A I use , [keepright.at](https://www.keepright.at/), [OSM Inspector](http://tools.geofabrik.de/osmi/), and [ITO World's map]( http://product.itoworld.com/map/129?lon=85.40441&lat=27.82368&zoom=9&open_sidebar=clickthrough_wrapper&fullscreen=true) showing the last 90 days of edits. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Marek-Kleciak/i-PrZNxmq/0/58d61e20/L/Screen%20Shot%202017-05-19%20at%2022.37.25-L.png" title="Demo F4 Example in Warsaw" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Marek-Kleciak/i-PrZNxmq/0/58d61e20/L/Screen%20Shot%202017-05-19%20at%2022.37.25-L.png" title="Demo F4 Example in Warsaw" >}} For 3D modeling: [Adobe Photoshop](https://en.wikipedia.org/wiki/Adobe_Photoshop), [ArchiCAD](https://en.wikipedia.org/wiki/ArchiCAD), and [f4map](http://demo.f4map.com/#camera.theta=0.9). JOSM PlugIns: [Kendzi3D](https://wiki.openstreetmap.org/wiki/JOSM/Plugins/Kendzi3D), Kendzi3d_improved_by_Andrei, [Shape Tools](https://wiki.openstreetmap.org/wiki/JOSM/Plugins/ShapeTools), [CAD Tools](https://wiki.openstreetmap.org/wiki/JOSM/Plugins/CADTools), [ContourOverlappingMerge](https://wiki.openstreetmap.org/wiki/JOSM/Plugins/ContourOverlappingMerge), [Tracer](https://wiki.openstreetmap.org/wiki/JOSM/Plugins/Tracer), [PicLayer](https://wiki.openstreetmap.org/wiki/JOSM/Plugins/PicLayer), [Alignways](https://wiki.openstreetmap.org/wiki/JOSM/Plugins/AlignWayS), areaselector, [buildings_tools](https://wiki.openstreetmap.org/wiki/JOSM/Plugins/BuildingsTools) – those plugins are the most important to me. But I use also the following plugins: [DFX import](https://wiki.openstreetmap.org/wiki/JOSM/Plugins/DXF_import), [FastDraw](https://wiki.openstreetmap.org/wiki/JOSM/Plugins/FastDraw), [junctionchecking](https://wiki.openstreetmap.org/wiki/JOSM/Plugins/JunctionChecking), [Mapillary](https://wiki.openstreetmap.org/wiki/JOSM/Plugins/Mapillary), [measurement](https://wiki.openstreetmap.org/wiki/JOSM/Plugins/measurement), [merge-overlap](https://github.com/openstreetmap/josm-plugins/tree/master/merge-overlap), [pdfimport](https://github.com/openstreetmap/josm-plugins/tree/master/pdfimport), [photoadjust](https://wiki.openstreetmap.org/wiki/JOSM/Plugins/PhotoAdjust), [reverter](https://wiki.openstreetmap.org/wiki/JOSM/Plugins/Reverter), [roadSigns](https://wiki.openstreetmap.org/wiki/JOSM/Plugins/RoadSigns), [splinex](https://wiki.openstreetmap.org/wiki/JOSM/Plugins/Splinex), [terracer](https://wiki.openstreetmap.org/wiki/JOSM/Plugins/Terracer), [tracer2](https://wiki.openstreetmap.org/wiki/JOSM/Plugins/Tracer2), [utilsplugin2](https://wiki.openstreetmap.org/wiki/JOSM/Plugins/utilsplugin2), [walkingpapers](https://wiki.openstreetmap.org/wiki/JOSM/Plugins/WalkingPapers). @@ -43,13 +43,13 @@ I do mapping around the world. Previously mostly in Poland and Germany, but with I have three points. First would be the organization of the [Garching Workshop](https://wiki.openstreetmap.org/wiki/2nd_3D_Workshop_Garching/Agenda): I suggested there the mapping schema known now as [Simple 3D Building](https://wiki.openstreetmap.org/wiki/Simple_3D_buildings). My good friend Kendzi, a very smart guy, developed based on this idea his plugin Kendzi3d. Now we have 3D maps. -{{< figure src="https://wiki.openstreetmap.org/w/images/5/58/88915622.png" title="Example 3D Building in Kendzi plugin" >}}{{< mdl-disable "" >}} +{{< figure src="https://wiki.openstreetmap.org/w/images/5/58/88915622.png" title="Example 3D Building in Kendzi plugin" >}} Secondly the lobbying for OSM in Poland and the foundation of the OSM Poland association. As the result the polish mappers got access to the very accurate government aerial images. Third: Specification of [area:highway](https://wiki.openstreetmap.org/wiki/Proposed_features/area:highway). Another smart mapper, marimil, has programmed the [visualization]( http://osmapa.pl/w/area/?lat=53.44252&lon=14.54771&zoom=19&ol=PEFGABR). Now, we have over 82000 such areas in the map. Why is it so important in my opinion? First: a better look of the map on highest zoom level, secondly: this content can help to develop apps for automated driving. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Marek-Kleciak/i-c9TzKQ5/0/e698a28e/L/Screen%20Shot%202017-05-19%20at%2022.25.27-L.png" title="Visualization of area:highway on osmapa.pl" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Marek-Kleciak/i-c9TzKQ5/0/e698a28e/L/Screen%20Shot%202017-05-19%20at%2022.25.27-L.png" title="Visualization of area:highway on osmapa.pl" >}} ## Why do you map? @@ -88,5 +88,5 @@ In 1998 I made my summer holidays in very small city in Krzywin, Poland. I had a He asked me, if this could be interesting for teenagers because the city has modern computer lab in the school. I said, "I don´t know, but we can try, never did it with teenagers, only with students at the university." Well, I spent 2 weeks with the kids and as the result we got an nice 3D model of the city. The kids worked hard, because it was their city. This time I learned, cloud projects are cool for people if they have tools and can learn how to do it. This was for me the reason to push 3D in OSM community. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Marek-Kleciak/i-RkGWRxX/0/74c21b80/L/Planmiasta-L.gif" alt="Krzywin, Poland" >}}{{< mdl-disable "" >}} -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Marek-Kleciak/i-8PvDjj7/0/2b50a00c/L/Miasto3%20jpg-L.jpg" alt="3D Model of Krzywin" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Marek-Kleciak/i-RkGWRxX/0/74c21b80/L/Planmiasta-L.gif" alt="Krzywin, Poland" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Marek-Kleciak/i-8PvDjj7/0/2b50a00c/L/Miasto3%20jpg-L.jpg" alt="3D Model of Krzywin" >}} diff --git a/content/posts/2017-06-23-motm-julien-minet.en.md b/content/posts/2017-06-23-motm-julien-minet.en.md index e3c0bea..3953dbc 100644 --- a/content/posts/2017-06-23-motm-julien-minet.en.md +++ b/content/posts/2017-06-23-motm-julien-minet.en.md @@ -8,7 +8,7 @@ author: escada I am Julien Minet. I come from the Luxembourg province in Belgium, from the border between the Ardens and the Gaume. I have a degree as Bio-engineer and worked for 8 years as a researcher at UCL and now ULg - Arlon. At the moment I work in web development, GIS and digital maps. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Julien-Minet/i-28mFrq5/0/adcba395/O/wallpapermapsmaker_arlon.png" alt="Maps of Arlon" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Julien-Minet/i-28mFrq5/0/adcba395/O/wallpapermapsmaker_arlon.png" alt="Maps of Arlon" >}} ## When and how did you discover OpenStreetMap? diff --git a/content/posts/2017-06-23-motm-julien-minet.fr.md b/content/posts/2017-06-23-motm-julien-minet.fr.md index aebca9d..f68886b 100644 --- a/content/posts/2017-06-23-motm-julien-minet.fr.md +++ b/content/posts/2017-06-23-motm-julien-minet.fr.md @@ -8,7 +8,7 @@ author: escada Je m'appelle Julien Minet. Je suis de la province de Luxembourg, à la limite de l'Ardenne et de la Gaume. Bio-ingénieur de formation, j'ai travaillé comme chercheur à l'UCL puis à l'ULg – Arlon pendant 8 ans. Je développe actuellement une activité en développement web, SIG et cartographie numérique. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Julien-Minet/i-28mFrq5/0/adcba395/O/wallpapermapsmaker_arlon.png" alt="Maps of Arlon" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Julien-Minet/i-28mFrq5/0/adcba395/O/wallpapermapsmaker_arlon.png" alt="Maps of Arlon" >}} ## Quand et comment avez-vous découvert OpenStreetMap ? diff --git a/content/posts/2017-07-18-motm-jamie-nadeau.en.md b/content/posts/2017-07-18-motm-jamie-nadeau.en.md index fa9b444..e357900 100644 --- a/content/posts/2017-07-18-motm-jamie-nadeau.en.md +++ b/content/posts/2017-07-18-motm-jamie-nadeau.en.md @@ -16,13 +16,13 @@ I first started seeking a better alternative to Google Maps as back then "off gr Initially I would map error on the map, missing roads. Then I moved on to buildings(manually via imagery), then addresses. Now I map anything and everything. I've done CANVEC imports, address and building imports, mapping indigenous villages in northern Canada and city admin limits. I'm not restricted to only Canada. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jamie-Nadeau/i-FzNvrTC/0/01e26752/XL/image%20%281%29-XL.png" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jamie-Nadeau/i-FzNvrTC/0/01e26752/XL/image%20%281%29-XL.png" >}} ## How do you map? Do you make surveys? Are you an armchair mapper? Both. When I scouted indoor mapping for malls, I would go in pen and paper and start taking notes. I drive a lot for OpenStreetCam and also upload to Mapillary. I've done a few HOT tasks as a local mapping party, but some parts in Canada are actually worse than some 3rd world countries. Northern Canada is not really surveyable, unless you plan on going by Canoe with camping gear and couple months supply of food. Myself and Rps333 have a friendly rivalery on who can cover more in OSC/Mapillary, it's benificial as we've done most of Ottawa by ourselves. Surveys are usually done with my phone or pen and paper. My favorite apps to do surveys in are OSMAnd(custom tag control), maps.me(easier for POI) and keypad mapper 3(quick address collection) -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jamie-Nadeau/i-Cs2TvxB/0/27c41ab4/X2/image%20%283%29-X2.pngg" alt="Mall Mapping" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jamie-Nadeau/i-Cs2TvxB/0/27c41ab4/X2/image%20%283%29-X2.pngg" alt="Mall Mapping" >}} ## How do you conduct your surveys? (in case you do them of course) @@ -32,13 +32,13 @@ If it's by pen and paper, I usually have printed off what I'm surveying and take Everywhere and anywhere. Mostly in Canada right now. It doesn't stop me from collecting data on my phone when I take a trip out of the country, something that my wife has grown accustomed to. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jamie-Nadeau/i-vqB5Hwc/0/0eebce0a/L/image%20%282%29-L.png" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jamie-Nadeau/i-vqB5Hwc/0/0eebce0a/L/image%20%282%29-L.png" >}} ## What is your biggest achievement as mapper? Finally getting the buildings and addresses into OSM for the Ottawa/Gatineau region and cleaning up the data. As well as mapping Fort McMurray during the forest fire. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jamie-Nadeau/i-R2j3pPW/0/cd11d987/L/image%20%284%29-L.png" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jamie-Nadeau/i-R2j3pPW/0/cd11d987/L/image%20%284%29-L.png" >}} ## Why do you map? What motivates you? @@ -52,7 +52,7 @@ I might not be popular for saying this but: dealing with the community. Sometime Fully qualify buildings in Ottawa/Gatineau (residential/detached/commercial, etc) and finish mapping all Native villages in Canada. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jamie-Nadeau/i-648Cdfq/0/fffcedcf/X2/image%20%285%29-X2.png" alt="3D" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jamie-Nadeau/i-648Cdfq/0/fffcedcf/X2/image%20%285%29-X2.png" alt="3D" >}} ## Do you have contact with other mappers? diff --git a/content/posts/2017-07-18-motm-jamie-nadeau.fr.md b/content/posts/2017-07-18-motm-jamie-nadeau.fr.md index 363703d..2227be5 100644 --- a/content/posts/2017-07-18-motm-jamie-nadeau.fr.md +++ b/content/posts/2017-07-18-motm-jamie-nadeau.fr.md @@ -16,13 +16,13 @@ J'ai commencé en cherchant une alternative à Google Maps, car dans ces jours l Initiallement je corrigeais des erreurs sur la carte. Après j'ai commencé à ajouté des édifices(manuellement via photo satélite), après des addresses. Maintenant j'ajoute n'importe quoi. J'ai fait de l'import CANVEC, d'addresses et d'édifices. Cartographier les villages des première nation dans le nord du Canada et les frontières des villes. Je me restreint pas à seulement le Canada. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jamie-Nadeau/i-FzNvrTC/0/01e26752/XL/image%20%281%29-XL.png" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jamie-Nadeau/i-FzNvrTC/0/01e26752/XL/image%20%281%29-XL.png" >}} ## Comment cartographiez-vous ? Sur le terrain ou "arm-chair" ? Les deux. Quand je fesait les cartes d'intérieur des centres d'achats, j'y allais avec papier crayon et je prenais des notes. Je conduit beaucoup pour OpenStreetCam et je téléverse aussi sur Mapillary. J'ai fait une couple de tâches HOT dans une rencontre de mapping, mais certaines parties du Canada sont pire que le tiers monde. Le nord du Canada n'est pas vraiement pratique de se rendre, a moins d'y aller en canot et une couple de mois de bouffe. Moi et Rps333 avons une rivalerie amical sur qui peut couvrire le plus de terrain dans OSC/Mapillary, ce qui est bénifique, car nous avons quasiement couvert toute Ottawa à nous deux. Mes enquêtes/arpentage se font avec mon téléphone ou par stylo et papier. Mes applications favoris sont OSMAnd(contrôle des tags), maps.me(plus facile pour les POI) et keypad mapper 3 (ajoût rapide d'addresses) -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jamie-Nadeau/i-Cs2TvxB/0/27c41ab4/X2/image%20%283%29-X2.png" alt="Mall Mapping" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jamie-Nadeau/i-Cs2TvxB/0/27c41ab4/X2/image%20%283%29-X2.png" alt="Mall Mapping" >}} ## Comment menez-vous vos relevés sur le terrain ? @@ -32,13 +32,13 @@ Si c'est papier crayon, j'imprime habituellement sur ce que je fais l'enquête e N'importe où. Majoritairement au Canada en ce moment. Ceci m'arrête pas de collectionner des données sur mon téléphone quand je suis en voyage hors du pays, une chose que ma femme s'est habitué de subir. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jamie-Nadeau/i-vqB5Hwc/0/0eebce0a/L/image%20%282%29-L.png" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jamie-Nadeau/i-vqB5Hwc/0/0eebce0a/L/image%20%282%29-L.png" >}} ## Quel est votre plus grande réussite en tant que cartographe ? Finalement importer les édifices et les addresses dans OSM pour la région d'Ottawa/Gatineau et nettoyant les données. Aussi cartographier Fort McMurray pendant le feu de forêt. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jamie-Nadeau/i-R2j3pPW/0/cd11d987/L/image%20%284%29-L.png" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jamie-Nadeau/i-R2j3pPW/0/cd11d987/L/image%20%284%29-L.png" >}} ## Pourquoi cartographiez-vous ? Qu'est-ce qui vous motive ? @@ -52,7 +52,7 @@ Je ne serais peut-être pas très populaire en disant ceci mais: intéragir avec Qualifier tous les édifices à Gatineau/Ottawa (résidentielle/détachée/commerciale, etc) et finir de cartographié les villages des premières nations au Canada. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jamie-Nadeau/i-648Cdfq/0/fffcedcf/X2/image%20%285%29-X2.png" alt="3D" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jamie-Nadeau/i-648Cdfq/0/fffcedcf/X2/image%20%285%29-X2.png" alt="3D" >}} ## Avez-vous des contacts avec d'autres cartographes ? diff --git a/content/posts/2017-07-18-motm-jamie-nadeau.nl.md b/content/posts/2017-07-18-motm-jamie-nadeau.nl.md index 121f4ea..f4bcada 100644 --- a/content/posts/2017-07-18-motm-jamie-nadeau.nl.md +++ b/content/posts/2017-07-18-motm-jamie-nadeau.nl.md @@ -17,7 +17,7 @@ Ik begon eerst te zoeken naar een beter alternatief voor Google Maps, omdat toen Initieel werkte ik aan fouten van de kaart, zoals ontbrekende wegen. Daarna ben ik begonnen met het manueel mappen van gebouwen via luchtfoto's en daarna adressen. Nu map ik bijna alles. Ik heb CANVEC imports gedaan, als wel als imports van adressen en gebouwen, maar ook onbeduidende dorpjes in het noorden van Canada. Verder heb ik ook administrative grenzen gemapped. Ik beperk me ook niet tot Canada. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jamie-Nadeau/i-FzNvrTC/0/01e26752/XL/image%20%281%29-XL.png" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jamie-Nadeau/i-FzNvrTC/0/01e26752/XL/image%20%281%29-XL.png" >}} ## Hoe map je? Maak je survey? Map je vanuit je luie zetel? @@ -32,13 +32,13 @@ Als ik nota's neem met pen en papier, heb ik gewoonlijk een afdruk gemaakt van h Overal zowat. Op het ogenblik hoofdzakelijk in Canada. Dat houdt me wel niet tegen om data te verzamelen met mijn smartphone wanneer ik een reisje naar het buitenland maak, iets wat mijn echtgenote ondertussen al gewend is geraakt. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jamie-Nadeau/i-vqB5Hwc/0/0eebce0a/L/image%20%282%29-L.png" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jamie-Nadeau/i-vqB5Hwc/0/0eebce0a/L/image%20%282%29-L.png" >}} ## Wat is je grootste verwezelijking als mapper? Het in OSM plaatsen van de gebouwen en adressen van de Ottowa/Gatineau regio en het opkuisen van de data. Dat en het mappen van Fort McMurray gedurende de bosbranden. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jamie-Nadeau/i-R2j3pPW/0/cd11d987/L/image%20%284%29-L.png" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jamie-Nadeau/i-R2j3pPW/0/cd11d987/L/image%20%284%29-L.png" >}} ## Waarom map je? Wat motiveer je? @@ -52,7 +52,7 @@ Ik maak me misschien niet populair als ik zeg: omgaan met de community. Het is s Het volledig detaileren van de gebouwen in Ottawa/Gatineaun(residentieel, vrijstaand, commercieel, enz.) en het afwerken van de mapping van "native" dorpen in Canada. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jamie-Nadeau/i-648Cdfq/0/fffcedcf/X2/image%20%285%29-X2.png" alt="3D" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Jamie-Nadeau/i-648Cdfq/0/fffcedcf/X2/image%20%285%29-X2.png" alt="3D" >}} ## Heb je contact met andere mappers? diff --git a/content/posts/2017-10-23-motm-seppe-santens.nl.md b/content/posts/2017-10-23-motm-seppe-santens.nl.md index 55a3806..e205b33 100644 --- a/content/posts/2017-10-23-motm-seppe-santens.nl.md +++ b/content/posts/2017-10-23-motm-seppe-santens.nl.md @@ -24,6 +24,7 @@ Ook qua methodes heb ik al veel uitgeprobeerd. Veel vanuit de luie zetel (hoofdz * GPS-tracks (opgenomen met bijv. OsmAnd) kunnen erg handig zijn, bijvoorbeeld voor het mappen van pas aangelegde wegen of paden in bossen, wat je met luchtfoto's meestal niet kan. De GPS-bepaling op de smartphones die ik al heb versleten, is echter nooit schitterend te noemen. * Mapillary en OpenStreetCam hebben volgens mij veel potentieel, maar brengen zelf ook nieuwe uitdagingen met zich mee: het bevestigen van de smartphone (op de fiets is me dit nog niet echt gelukt, ondanks de vrijgevigheid van Mapillary), schokken vermijden, nauwkeurige GPS-bepaling, ervoor zorgen dat de dingen die je wil mappen ook te zien zijn op de foto's, maar vooral ook achteraf ervoor zorgen dat je niemands privacy schendt met de beelden die je online zet (een erg arbeidsintensief werkje als je dit goed wil doen, ik zou hier zelf nog eens wat extra tijd in moeten steken). * Een van de simpelste methodes, vooraf een kaartje uitprinten (met alle fixme's en kaartopmerkingen erop) en daarop notities maken (eventueel aangevuld met foto's) heb ik vreemd genoeg nog niet geprobeerd, maar het lijkt me ondanks alle technologische hulpmiddelen misschien nog het meest effectief. Binnenkort eens proberen dus. + Ik probeer de gebieden waar ik map ook zoveel mogelijk te bevrijden van waarschuwingen van de JOSM validator of van Osmose. Misschien doen we dat met zijn allen nog iets te weinig? ## Waar map je? diff --git a/content/posts/2017-11-17-motm-horeameleg-florinbadita.en.md b/content/posts/2017-11-17-motm-horeameleg-florinbadita.en.md index 34d8e16..a1ef4f8 100644 --- a/content/posts/2017-11-17-motm-horeameleg-florinbadita.en.md +++ b/content/posts/2017-11-17-motm-horeameleg-florinbadita.en.md @@ -11,14 +11,14 @@ This time we have a duo-interview: Horea Meleg and Florin Badita. They both work Horea: My name is Horea Meleg, I live in Cluj Napoca. I'm a map analyst at Telenav, and I work here since August 2016. I love playing and watching soccer. I also like to sing, to travel and go hiking. Obvious, I got my nickname (hoream_telenav) from my name and from the company I work for. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Horea-Florin/i-ZLx99zH/0/793f118a/L/1451311_878771192165725_6572949533461042750_n-L.jpg" title="Horea" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Horea-Florin/i-ZLx99zH/0/793f118a/L/1451311_878771192165725_6572949533461042750_n-L.jpg" title="Horea" >}} Florin: Hi, my name is Florin Badita. I also live in Cluj-Napoca, one of the most beautiful cities in Romania. Currently I work full time as a Senior Map Analyst at Telenav. As a hobby, I do Data Science, Spray Painting, facilitate the organization of Civic Protests in Romania, Theatre, and many other things. -{{< figure src="https://pbs.twimg.com/profile_images/2734227526/07a1e0ca8249dd5195cd6532882fdef7_400x400.jpeg" title="Florin" >}}{{< mdl-disable "" >}} +{{< figure src="https://pbs.twimg.com/profile_images/2734227526/07a1e0ca8249dd5195cd6532882fdef7_400x400.jpeg" title="Florin" >}} ## When and how did you discover OpenStreetMap? @@ -58,7 +58,7 @@ For getting images: i use both Mapillary and OpenStreetCam (made by Telenav) Horea: I used to edit in Canada at the end of last year. In last 6 months, I focused on Detroit area as part of the Telenav Team. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Horea-Florin/i-KjJ2pPB/0/4bdd8e68/XL/Horea%20Meleg%20heatmap-XL.jpg" title="Horea's Heatmap" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Horea-Florin/i-KjJ2pPB/0/4bdd8e68/XL/Horea%20Meleg%20heatmap-XL.jpg" title="Horea's Heatmap" >}} Florin: As Horea, I now also map mostly in USA and Canada, as part of the Telenav strategy. Unfortunately, I don`t have that much time to do some mapping in my free time, but I try to spend some time learning new mappers how to map, so that we have some more mappers mapping remote/HOT. diff --git a/content/posts/2018-03-09-meeting-brussels.en.md b/content/posts/2018-03-09-meeting-brussels.en.md index 42519c1..c4fb594 100644 --- a/content/posts/2018-03-09-meeting-brussels.en.md +++ b/content/posts/2018-03-09-meeting-brussels.en.md @@ -9,7 +9,7 @@ location: osm: https://www.openstreetmap.org/node/4841295873 --- -**Let's build a community with everybody interested in OpenStreetMap!** +## Let's build a community with everybody interested in OpenStreetMap The target audience is everybody! From hearing the word OpenStreetMap a few seconds ago to the total expert in no time. There will be someone you can discuss and have a drink with we're an interational community speaking English, Dutch, French so come join us! @@ -18,4 +18,4 @@ Tell us what you'd like discuss/present/share. ### Program 1. OSMBE official meeting at BeCentral ; -2. Casual meetup in a pub at [The Sister](http://www.thesister-brussels.com/) (Rue Chair et Pain 3 - 1000 Bruxelles) ; +1. Casual meetup in a pub at [The Sister](http://www.thesister-brussels.com/) (Rue Chair et Pain 3 - 1000 Bruxelles) ; diff --git a/content/posts/2018-03-13-road-completion-workshop.en.md b/content/posts/2018-03-13-road-completion-workshop.en.md index a99d34d..15ff7c8 100644 --- a/content/posts/2018-03-13-road-completion-workshop.en.md +++ b/content/posts/2018-03-13-road-completion-workshop.en.md @@ -9,13 +9,13 @@ location: osm: https://www.openstreetmap.org/node/4841295873 --- -### What we'll do +## What we'll do We found 13.000 missing roads in Flanders, Belgium! Help us map them with the tools we made. We'll teach you how to do it, and if you're interested tell you all about our plans with the project. Check out <{{< ref "projects/road-completion.md" >}}> for more info We're doing this during the Biweekly Civic Hack night, so you could work on some other projects too. See -### What to bring +## What to bring Bring a laptop, a mouse is handy. diff --git a/content/posts/2018-07-13-motm-lionel_giard.en.md b/content/posts/2018-07-13-motm-lionel_giard.en.md index b188753..e32928b 100644 --- a/content/posts/2018-07-13-motm-lionel_giard.en.md +++ b/content/posts/2018-07-13-motm-lionel_giard.en.md @@ -33,7 +33,7 @@ Recently I started to contribute to Mapillary. This helps to identify objects th I try not to forget to add interesting photos to Wikimedia Commons. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Lionel-Giard/i-7cLXrTG/0/34093fa6/S/menhir-S.png" title="A menhir that I discovered in my own neighborhood!" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Lionel-Giard/i-7cLXrTG/0/34093fa6/S/menhir-S.png" title="A menhir that I discovered in my own neighborhood!" >}} ## How do you collect data during a survey? diff --git "a/content/posts/2018-10-30-motm-aylin-k\304\261z\304\261laslan.en.md" "b/content/posts/2018-10-30-motm-aylin-k\304\261z\304\261laslan.en.md" index 1da35ea..6521f27 100644 --- "a/content/posts/2018-10-30-motm-aylin-k\304\261z\304\261laslan.en.md" +++ "b/content/posts/2018-10-30-motm-aylin-k\304\261z\304\261laslan.en.md" @@ -28,7 +28,7 @@ I follow MISSING MAPS calls for mappers to map areas which need urgent help due Generally, I map locally, but from time to time I map for HOT. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Aylin-Kizilaslan/i-Vxq4chQ/0/402d25e9/L/3-L.jpg" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Aylin-Kizilaslan/i-Vxq4chQ/0/402d25e9/L/3-L.jpg" >}} ## What is your biggest achievement as mapper ? @@ -46,7 +46,7 @@ I think the beginning of something is always difficult. So it wasn't easy to lea Detailing maps of Turkey and mapping other countries that need humanitarian help. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Aylin-Kizilaslan/i-DD6BrrV/0/29b08491/L/4-L.jpg" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Aylin-Kizilaslan/i-DD6BrrV/0/29b08491/L/4-L.jpg" >}} ## Do you have contact with other mappers ? @@ -56,14 +56,14 @@ Yes, of course. I am in contact with OSM Turkey mappers and we have had mapathon I usually use OpenStreetMap to locate a restaurant when I'm in Istanbul. It is really useful. But maps of other cities of Turkey are not sufficient enough yet. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Aylin-Kizilaslan/i-Lmc9Ddc/0/cc3b5735/L/5-L.jpg" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Aylin-Kizilaslan/i-Lmc9Ddc/0/cc3b5735/L/5-L.jpg" >}} ## Do you do anything else than mapping that is related to OpenStreetMap ? As I mentioned, I organised a mapathon in my university. It was the first time for my 40 friends to participate in OpenStreetMap. In my opinion, it is not only mapping that is important, but also making your community and works more apparent. For that purpose, sharing your knowledge and enthusiasm with other people is so important. Because it brings you more and more people who will all work together with the same goal. Then we can easily grow larger as a community. There are so many ways to contribute. This is one of them. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Aylin-Kizilaslan/i-c99qmDd/0/73c55036/L/6-L.jpg" >}}{{< mdl-disable "" >}} -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Aylin-Kizilaslan/i-HXTCdBP/0/da06db40/L/7-L.jpg" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Aylin-Kizilaslan/i-c99qmDd/0/73c55036/L/6-L.jpg" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Aylin-Kizilaslan/i-HXTCdBP/0/da06db40/L/7-L.jpg" >}} ## To conclude, is there anything else you want to mention ? diff --git a/content/posts/2018-11-30-motm-can-unen.en.md b/content/posts/2018-11-30-motm-can-unen.en.md index 17e2b0a..dda8e54 100644 --- a/content/posts/2018-11-30-motm-can-unen.en.md +++ b/content/posts/2018-11-30-motm-can-unen.en.md @@ -11,7 +11,7 @@ Can Ünen username: [`unen`](https://www.openstreetmap.org/user/unen) I'm a university lecturer in Istanbul, with a B.Sc. in civil engineering and a Ph.D. in geomatics. I'm the chairman of board and one of the founding members of Yer Çizenler (a made up term not used daily in Turkish, directly translating to “geographers”), an association for everyone who wants to learn how to map in OpenStreetMap, contribute to the map by joining millions worldwide, and utilize user generated open geospatial data in humanitarian context in Turkey. I was also Humanitarian OpenStreetMap Team's (HOT) country manager for Turkey, during Yer Çizenler's partnership with HOT for “Crowdsourcing Non-Camp Refugee Data Through OpenStreetMap” project until June 2018. My OSM username is unen. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Can-Ünen/i-f26SsHc/0/ac324936/X3/CanUnen_photo_-X3.png" title="Missing Maps Mapathon with MSF Turkey" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Mapper-in-the-Spotlight/Can-Ünen/i-f26SsHc/0/ac324936/X3/CanUnen_photo_-X3.png" title="Missing Maps Mapathon with MSF Turkey" >}} I have a hobby to take up hobbies for some time and leave them lying around, fooling myself that I'll pick them back up sometime. You should see my sailless model ship. I'm riding a motorbike consistently for 4 years, and homebrewing my beer for 3; so I think it's safe to say they are my hobbies. diff --git a/content/posts/2018-12-17-weekly-riot.en.md b/content/posts/2018-12-17-weekly-riot.en.md index d5079bd..bdb4cea 100644 --- a/content/posts/2018-12-17-weekly-riot.en.md +++ b/content/posts/2018-12-17-weekly-riot.en.md @@ -95,7 +95,7 @@ For designation, wegspotter proposes this: - `designation=communal_road_ss` *(it is property of the municipality & it is destinied for public use & it does not appear in the atlas of vicinal roads)* - `designation=right_of_way_ss` *(it is a public right of way, but does not show up in the atlas of vicinal roads* -*In Wallonia, you only have one category `designation=communal_road` (without the ss, since the Flemish/Brussels situation is stricter* +*In Wallonia, you only have one category `designation=communal_road` (without the ss, since the Flemish/Brussels situation is stricter.* By extension, for the vicinal roads we'd come to this: (based on an example picture by escada) diff --git a/content/posts/2018-12-24-weekly-riot.en.md b/content/posts/2018-12-24-weekly-riot.en.md index 7f493aa..023c17f 100644 --- a/content/posts/2018-12-24-weekly-riot.en.md +++ b/content/posts/2018-12-24-weekly-riot.en.md @@ -24,7 +24,7 @@ Options will be taken into consideration, as it's still early days. Escada informs the channel that OSM Bussiness is now running on a 'production server' ( ). Juminet is pleased with this (but feels an 'opening hours generator' would be a nice extra feature). -Glen regrets it running of the tiles, where tile servers are still struggling. +Glen regrets it running of the tiles, where tile servers are still struggling. Joost is enthousiastic, but regrets it not being able to directly edit data. Tim asks about the changed layout of the 'WhoDidIt'- RSS-feed, which used to be human readable in brower but now seems to show only in code form. Lionel_giard refers to using Riot as an RSS-reader for the feed. diff --git a/content/posts/2021-06-11-annual-report-2020.en.md b/content/posts/2021-06-11-annual-report-2020.en.md index c27aeb1..d8f09f5 100644 --- a/content/posts/2021-06-11-annual-report-2020.en.md +++ b/content/posts/2021-06-11-annual-report-2020.en.md @@ -69,7 +69,7 @@ Both meetups went really well. People seemed happy to see and talk to fellow map We also decided to organize our meetups (online or IRL) on a fixed date : last Tuesday every 2 months. -### EqualStreetNames {{< mdl-disable "" >}} +### EqualStreetNames For the EqualStreetNames project (see above), we hosted in March an event at [MSF Belgium](https://www.msf-azg.be/) headquarters in Brussels. We organized together with [Open Knowledge Belgium](https://openknowledge.be/) and [Wikimedia Belgium](https://be.wikimedia.org/) an event to try to find information about the people that have a streetname in Brussels. diff --git a/content/posts/2023-08-26-annual-report-2022.en.md b/content/posts/2023-08-26-annual-report-2022.en.md index 353fa88..b855177 100644 --- a/content/posts/2023-08-26-annual-report-2022.en.md +++ b/content/posts/2023-08-26-annual-report-2022.en.md @@ -69,7 +69,7 @@ You can check all our newsletters and register if you want to receive it by clic ### Paid mapping: cycle higways -The 5 Flemish provinces are building a network of cycle highways together. These are mapped in fine detail in OSM. The data is used by the routeplanner the provinces offer at . We worked together to finetune the data model and the data quality. After this, it was decided that we would also maintain the data for them. We made a commitment to update the network in OSM within two weeks after they sent us an update. We can't make commitments as volunteers, so this is a job we invoice for. The amount of work is relatively minor and has de facto been done on a voluntary basis, though we do get the income. +The 5 Flemish provinces are building a network of cycle highways together. These are mapped in fine detail in OSM. The data is used by the routeplanner the provinces offer at . We worked together to finetune the data model and the data quality. After this, it was decided that we would also maintain the data for them. We made a commitment to update the network in OSM within two weeks after they sent us an update. We can't make commitments as volunteers, so this is a job we invoice for. The amount of work is relatively minor and has de facto been done on a voluntary basis, though we do get the income. ## Events diff --git a/content/posts/2023-08-26-annual-report-2022.nl.md b/content/posts/2023-08-26-annual-report-2022.nl.md index a148f84..23f57ac 100644 --- a/content/posts/2023-08-26-annual-report-2022.nl.md +++ b/content/posts/2023-08-26-annual-report-2022.nl.md @@ -68,7 +68,7 @@ Je kan al onze vorige nieuwsbrieven bekijken en je registreren om ze per e-mail ### Betaald karteren: fietssnelwegen -De 5 Vlaamse provincies bouwen samen een netwerk van fietssnelwegen. Deze worden nauwkeurig in kaart gebracht in OSM. De gegevens worden gebruikt door de routeplanner die de provincies aanbieden op . We werkten samen om het datamodel en de datakwaliteit te verfijnen. Daarna is besloten dat we de gegevens ook voor hen zouden onderhouden. We hebben afgesproken dat wanneer ze ons een update sturen, we het netwerk in OSM binnen de twee weken bijwerken. Als vrijwilligers kunnen we dat niet garanderen, dus dit is een klus waarvoor we factureren. De hoeveelheid werk is relatief klein en werd tot nog toe de facto op vrijwillige basis gedaan, maar we krijgen hier wel wat inkomsten door. +De 5 Vlaamse provincies bouwen samen een netwerk van fietssnelwegen. Deze worden nauwkeurig in kaart gebracht in OSM. De gegevens worden gebruikt door de routeplanner die de provincies aanbieden op . We werkten samen om het datamodel en de datakwaliteit te verfijnen. Daarna is besloten dat we de gegevens ook voor hen zouden onderhouden. We hebben afgesproken dat wanneer ze ons een update sturen, we het netwerk in OSM binnen de twee weken bijwerken. Als vrijwilligers kunnen we dat niet garanderen, dus dit is een klus waarvoor we factureren. De hoeveelheid werk is relatief klein en werd tot nog toe de facto op vrijwillige basis gedaan, maar we krijgen hier wel wat inkomsten door. ## Evenementen diff --git a/content/posts/2023-10-07-european-camera-grant.en.md b/content/posts/2023-10-07-european-camera-grant.en.md index 8bac116..da2ffbf 100644 --- a/content/posts/2023-10-07-european-camera-grant.en.md +++ b/content/posts/2023-10-07-european-camera-grant.en.md @@ -14,9 +14,9 @@ Meta has financed twenty GoPro Max 360° and accessories to capture on foot, by The GoPro Max was chosen for four reasons: 1. Ease of use: The GoPro Max is incredibly simple to use. Just hit record and drop the images into Mapillary's Desktop Uploader. -2. Form factor: The camera is lightweight and designed for action, which makes it suitable for a variety of capture scenarios you might have in mind. A lighter camera means lighter mounting equipment. -3. Cost: It's affordable, allowing us to scale up the program and get more cameras to more people. -4. Image quality: While there are cameras capable of capturing a higher quality 360º image, the GoPro does a lot considering its price and form factor. Mapillary is able to derive a lot of map data from GoPro Max images including the location of sidewalks. +1. Form factor: The camera is lightweight and designed for action, which makes it suitable for a variety of capture scenarios you might have in mind. A lighter camera means lighter mounting equipment. +1. Cost: It's affordable, allowing us to scale up the program and get more cameras to more people. +1. Image quality: While there are cameras capable of capturing a higher quality 360º image, the GoPro does a lot considering its price and form factor. Mapillary is able to derive a lot of map data from GoPro Max images including the location of sidewalks. ## Objectives & requirements diff --git a/content/posts/2023-10-07-european-camera-grant.fr.md b/content/posts/2023-10-07-european-camera-grant.fr.md index 7a4de65..af169f8 100644 --- a/content/posts/2023-10-07-european-camera-grant.fr.md +++ b/content/posts/2023-10-07-european-camera-grant.fr.md @@ -14,9 +14,9 @@ Meta a financé vingt GoPro Max 360° et leurs accessoires pour réaliser des pr La GoPro Max a été choisie pour quatre raisons : 1. La facilité d'utilisation : La GoPro Max est incroyablement simple à utiliser. Il suffit d'enregistrer et de déposer les images dans le logiciel de téléchargement de Mapillary. -2. Facteur de forme : La caméra est légère et conçue pour l'action, ce qui la rend adaptée à une variété de scénarios de capture que vous pourriez avoir à l'esprit. Une caméra plus légère signifie un équipement de montage plus léger. -3. Coût : La caméra est abordable, ce qui nous permet d'étendre le programme et de mettre plus de caméras à la disposition d'un plus grand nombre de personnes. -4. Qualité de l'image : Bien qu'il existe des caméras capables de capturer des images à 360° de meilleure qualité, la GoPro offre la meilleure qualité compte tenu de son prix et de son format. Mapillary est capable de dériver de nombreuses données cartographiques à partir des images GoPro Max, y compris l'emplacement des trottoirs. +1. Facteur de forme : La caméra est légère et conçue pour l'action, ce qui la rend adaptée à une variété de scénarios de capture que vous pourriez avoir à l'esprit. Une caméra plus légère signifie un équipement de montage plus léger. +1. Coût : La caméra est abordable, ce qui nous permet d'étendre le programme et de mettre plus de caméras à la disposition d'un plus grand nombre de personnes. +1. Qualité de l'image : Bien qu'il existe des caméras capables de capturer des images à 360° de meilleure qualité, la GoPro offre la meilleure qualité compte tenu de son prix et de son format. Mapillary est capable de dériver de nombreuses données cartographiques à partir des images GoPro Max, y compris l'emplacement des trottoirs. ## Objectifs et exigences diff --git a/content/posts/2023-10-07-european-camera-grant.nl.md b/content/posts/2023-10-07-european-camera-grant.nl.md index dac6af7..e929fd5 100644 --- a/content/posts/2023-10-07-european-camera-grant.nl.md +++ b/content/posts/2023-10-07-european-camera-grant.nl.md @@ -14,9 +14,9 @@ Meta heeft twintig GoPro Max 360° en accessoires gefinancierd om te voet, met d De GoPro Max is om vier redenen gekozen: 1. Gebruiksgemak: De GoPro Max is ongelooflijk eenvoudig te gebruiken. Je hoeft alleen maar op de knop "opnemen" te drukken en de beelden met Mapillary's Desktop Uploader te uploaden. -2. Vormfactor: De camera is licht en ontworpen voor actie, waardoor hij geschikt is voor verschillende opnamescenario's. En een lichtere camera betekent lichtere montageapparatuur. -3. Kosten: Hij is betaalbaar, waardoor we het programma kunnen opschalen en meer camera's bij meer mensen kunnen krijgen. -4. Beeldkwaliteit: Hoewel er camera's zijn die 360º-beeld van hogere kwaliteit kunnen vastleggen, doet de GoPro veel voor zijn prijs en vormfactor. Mapillary kan veel kaartgegevens afleiden uit GoPro Max-beelden, waaronder de locatie van trottoirs. +1. Vormfactor: De camera is licht en ontworpen voor actie, waardoor hij geschikt is voor verschillende opnamescenario's. En een lichtere camera betekent lichtere montageapparatuur. +1. Kosten: Hij is betaalbaar, waardoor we het programma kunnen opschalen en meer camera's bij meer mensen kunnen krijgen. +1. Beeldkwaliteit: Hoewel er camera's zijn die 360º-beeld van hogere kwaliteit kunnen vastleggen, doet de GoPro veel voor zijn prijs en vormfactor. Mapillary kan veel kaartgegevens afleiden uit GoPro Max-beelden, waaronder de locatie van trottoirs. ## Doelstellingen & vereisten diff --git a/content/posts/2024-04-25-tiles-updated.fr.md b/content/posts/2024-04-25-tiles-updated.fr.md index 586ad01..e9ca1ed 100644 --- a/content/posts/2024-04-25-tiles-updated.fr.md +++ b/content/posts/2024-04-25-tiles-updated.fr.md @@ -3,7 +3,6 @@ title: "Des fonds de carte OpenStreetMap Belgique mis à jour" author: Julien Minet --- - Les fonds de carte OpenStreetMap Belgique ont été mis à jour! Cela fait près de 7 ans que [OpenStreetMap Belgique met à disposition ses propres fonds de carte basé sur OpenStreetMap]({{< ref "projects/belgium-baselayer.md" >}}). Mais qu'est-ce que ces fonds de carte? Basés sur un serveur de tuiles cartographiques, il s'agit de cartes à intégrer dans un site web ou une application, et qui servent d'arrière-plan à une carte thématique. Pourquoi faisons-nous cela ? Nous avons constaté que de nombreux sites web utilisent les tuiles par défaut du site web openstreetmap.org. Cependant, ce serveur n'est pas destiné à être utilisé en production dans des projets réels. Pour faciliter le passage à OpenStreetMap, vous pouvez utiliser notre serveur de tuiles pour vos projets. Et c'est le cas : de nombreux sites web municipaux utilisent nos tuiles, ainsi que d'autres sites web tels que les offices de tourisme locaux. Les cartes de fond sont disponibles gratuitement, sous réserve d'une utilisation raisonnable (voir ). diff --git a/content/posts/2024-04-25-tiles-updated.nl.md b/content/posts/2024-04-25-tiles-updated.nl.md index c4d02d2..03dea71 100644 --- a/content/posts/2024-04-25-tiles-updated.nl.md +++ b/content/posts/2024-04-25-tiles-updated.nl.md @@ -3,7 +3,6 @@ title: "OpenStreetMap Belgium basiskaart is terug up-to-date" author: Julien Minet --- - De OpenStreetMap Belgium basiskaarten zijn bijgewerkt! [OpenStreetMap Belgium biedt al bijna 7 jaar gratis OpenStreetMap achtergrondkaarten aan](https://openstreetmap.be/nl/projects/belgium-baselayer.html). Maar wat zijn deze achtergronden? Wel, we zetten de enorme en complexe OpenStreetMap data om in eenvoudige afbeeldingen of "tiles", die gebruikt kunnen worden in elke website of app. Waarom doen we dat? Wel, we merken dat veel websites de standaard tiles gebruiken vanop de openstreetmap.org website. Deze server is echter niet bedoelt om in productie te gebruiken in live projecten. Om het eenvoudiger te maken om over te stappen naar OpenStreetMap, mag je onze tileserver wel gewoon gebruiken voor je projecten. En dat gebeurt ook: veel gemeentelijke websites gebruiken onze tiles, net als andere websites zoals lokale toeristenbureaus. De achtergrondkaarten zijn gratis beschikbaar, mits redelijk gebruik (zie ). diff --git a/content/posts/2024-11-08-general-news.en.md b/content/posts/2024-11-08-general-news.en.md index 516e5aa..babd896 100644 --- a/content/posts/2024-11-08-general-news.en.md +++ b/content/posts/2024-11-08-general-news.en.md @@ -3,7 +3,6 @@ title: "OpenStreetMap Belgium general status" author: Joost Schouppe --- - Hey, remember we have a newsletter? [You can still subscribe here](http://eepurl.com/dmDi-5). Maybe it's taken so long to send a new edition because we've been doing so many other things. For example, during 2023, OSM.be was reborn as its own independent NGO! Our umbrella organization Open Knowledge Belgium went through hard times, and is now refocusing on its core projects. We're glad to have been part of that community, and even happier that we now have everything under the control of the OpenStreetMap community. diff --git a/content/posts/2024-11-09-help-us-map.fr.md b/content/posts/2024-11-09-help-us-map.fr.md index 8aa8510..3966ce3 100644 --- a/content/posts/2024-11-09-help-us-map.fr.md +++ b/content/posts/2024-11-09-help-us-map.fr.md @@ -3,7 +3,6 @@ title: "Aides nous a faire la difference avec la carte" author: Joost Schouppe --- - Les données OpenStreetMap devenant de plus en plus pertinentes, de plus en plus de parties externes souhaitent que les sujets qui les intéressent soient cartographiés de manière très détaillée. Voulez-vous nous aider sur les sujets qui nous tiennent le plus à cœur ? Jetez un coup d'œil à la liste des [principales tâches de cartographie](https://wiki.openstreetmap.org/wiki/WikiProject_Belgium/top_mapping_tasks) sur le wiki ! Permettez-nous de mettre l'accent sur deux organisations avec lesquelles nous travaillons. diff --git a/content/posts/2024-11-09-help-us-map.nl.md b/content/posts/2024-11-09-help-us-map.nl.md index 2448fb9..a9d61f4 100644 --- a/content/posts/2024-11-09-help-us-map.nl.md +++ b/content/posts/2024-11-09-help-us-map.nl.md @@ -3,7 +3,6 @@ title: "Help ons de kaart verbeteren waar het verschil maakt" author: Joost Schouppe --- - Nu OpenStreetMap gegevens steeds relevanter worden, willen steeds meer externe partijen onderwerpen die voor hen van belang zijn gedetailleerd in kaart brengen. Wil je helpen met onderwerpen waar we het meest om geven? Kijk dan eens naar de [top mapping tasks](https://wiki.openstreetmap.org/wiki/WikiProject_Belgium/top_mapping_tasks) lijst op de wiki! Laten we even twee organisaties uitlichten waarmee we samenwerken. diff --git a/content/posts/2024-11-09-lili.en.md b/content/posts/2024-11-09-lili.en.md index 21b1cb1..8e8cc36 100644 --- a/content/posts/2024-11-09-lili.en.md +++ b/content/posts/2024-11-09-lili.en.md @@ -5,7 +5,6 @@ categories: ["event"] tags: ["mapathon"] --- - OpenStreetMap Belgium is organizing a mapathon in Bruges as part of our participation in the AMAI "[Lili-app project](https://amai.vlaanderen/projecten/project3-lili)". The Lili-app will help visually impaired people find and follow the best route using their smartphone. The app will take into account infrastructure such as sidewalks and pedestrian crossings and special facilities such as tactile paving and traffic lights with sound signals. Initially, a prototype of the app will be developed that is limited to the city of Bruges. During the mapathon, we will add missing infrastructure to OpenStreetMap. Everyone is welcome. We help beginners take their first steps. There will also be more complex tasks for experienced mappers. diff --git a/content/posts/2024-11-09-lili.fr.md b/content/posts/2024-11-09-lili.fr.md index 4bb2549..d8bf6ad 100644 --- a/content/posts/2024-11-09-lili.fr.md +++ b/content/posts/2024-11-09-lili.fr.md @@ -5,8 +5,6 @@ categories: ["event"] tags: ["mapathon"] --- - - OpenStreetMap Belgium organise un mapathon à Bruges dans le cadre de notre participation à l'AMAI « [Projet Lili-app](https://amai.vlaanderen/projecten/project3-lili) ». L'application Lili aidera les personnes malvoyantes à trouver et à suivre le meilleur itinéraire à l'aide de leur smartphone. L'application prendra en compte les infrastructures telles que les trottoirs et les passages piétons, ainsi que les aménagements spéciaux tels que les pavés tactiles et les feux de circulation avec signaux sonores. Dans un premier temps, un prototype de l'application sera développé, limité à la ville de Bruges. Pendant le mapathon, nous ajouterons les infrastructures manquantes à OpenStreetMap. Tout le monde est le bienvenu. Nous aidons les débutants à faire leurs premiers pas. Il y aura également des tâches plus complexes pour les cartographes expérimentés. diff --git a/content/posts/2024-11-09-lili.nl.md b/content/posts/2024-11-09-lili.nl.md index c816849..89395e0 100644 --- a/content/posts/2024-11-09-lili.nl.md +++ b/content/posts/2024-11-09-lili.nl.md @@ -5,7 +5,6 @@ categories: ["event"] tags: ["mapathon"] --- - OpenStreetMap Belgium organiseert een mapathon in Brugge als onderdeel van onze deelname aan het AMAI "[Lili-app project](https://amai.vlaanderen/projecten/project3-lili)". De Lili-app zal mensen met een visuele beperking helpen om de beste route te vinden en te volgen met hun smartphone. De app zal rekening houden met infrastructuur zoals trottoirs en zebrapaden en speciale voorzieningen zoals tactiele bestrating en verkeerslichten met geluidssignalen. In eerste instantie wordt een prototype van de app ontwikkeld dat beperkt is tot de stad Brugge. Tijdens de mapathon zullen we ontbrekende infrastructuur toevoegen aan OpenStreetMap. Iedereen is welkom. We helpen beginners met hun eerste stappen. Er zullen ook complexere taken zijn voor ervaren mappers. diff --git a/content/projects/belgium-baselayer.en.md b/content/projects/belgium-baselayer.en.md index 88a9419..c9f900b 100644 --- a/content/projects/belgium-baselayer.en.md +++ b/content/projects/belgium-baselayer.en.md @@ -22,12 +22,12 @@ This custom OpenStreetMap rendering is available in 3 languages: The default name means that all names of streets and places will be shown in the local language. In Brussels (and to some degree in the facility municipalities) this means both the Dutch and the French name will be shown. The French and Dutch name versions give preference to that language, if available. In Brussels, this will make the map a lot easier to read. In the rest of the country, for example, Grammont will be shown for Geraardsbergen in the French version, and Bergen will be shown for Mons in the Dutch version. -### Custom icons/rendering +## Custom icons/rendering * Icon for `amenity=fast_food` + `cuisine=friture` * Icon for `craft=brewery` or `industrial=brewery` -### How to use it? +## How to use it? You can see the baselayers available here: . @@ -36,13 +36,13 @@ If you want to use it with *[OpenLayers](https://openlayers.org/)* or *[Leaflet] **Please respect the [usage policy](https://github.com/jbelien/openstreetmap-carto-be/wiki/Tile-Usage-Policy)!** -### Project documentation +## Project documentation * Custom OSMBE style: * Documentation: * Usage policy: -### Project key events +## Project key events We first tried using VectorTiles for OSMBE baselayer; it works quite well but the technology was not quite ready yet. diff --git a/content/projects/belgium-baselayer.fr.md b/content/projects/belgium-baselayer.fr.md index 3ebfeb2..6b92d6f 100644 --- a/content/projects/belgium-baselayer.fr.md +++ b/content/projects/belgium-baselayer.fr.md @@ -19,12 +19,12 @@ Ce fond de carte est disponible en 4 versions linguistiques : * En Français, avec le tag `name:fr` ; * En Néérlandais, avec le tag `name:nl` ; -### Icônes propres aux fonds de carte OpenStreetMap Belgique +## Icônes propres aux fonds de carte OpenStreetMap Belgique * Icône pour `amenity=fast_food` + `cuisine=friture` * Icône pour `craft=brewery` ou `industrial=brewery` -### Comment utiliser le fond de carte ? +## Comment utiliser le fond de carte ? Vous pouvez visualiser les fonds de carte ici : . @@ -33,13 +33,13 @@ Si vous souhaitez utiliser *[OpenLayers](https://openlayers.org/)* ou *[Leaflet] **Veuillez respecter les [conditions d'utilisation](https://github.com/jbelien/openstreetmap-carto-be/wiki/Tile-Usage-Policy) !** -### Documentation +## Documentation * Dépôt GitHub du project : * Documentation : * Conditions d'utilisation : -### Evénements clés +## Evénements clés Nous avons d'abord essayé d'utiliser la technologie des *VectorTiles* pour le fond de carte, en 2016 ; cela fonctionne bien mais est assez lourd à mettre en place, l'idée a donc été abandonnée. diff --git a/content/projects/belgium-baselayer.nl.md b/content/projects/belgium-baselayer.nl.md index 99e0c53..aba26d0 100644 --- a/content/projects/belgium-baselayer.nl.md +++ b/content/projects/belgium-baselayer.nl.md @@ -18,12 +18,12 @@ Met de project hosten we de standaard OpenStreetMap achtergrondkaart lichtjes aa Met de standaard _name_ of naam toon je plaatsnamen en straten met de naam in de lokale taal. In Brussel en sommige faciliteitengemeenten betekent dit dat de namen tegelijk in het Frans en het Nederlands getoond worden. De Franse en Nederlandse versie geven voorkeur aan die taal, indien beschikbaar. In Brussel maakt dit de kaart veel leesbaarder. In de rest van het land krijg je dan bijvoorbeeld Grammont te zien voor Geraardsbergen in de Franstalige versie, of Bergen voor Mons in de Nederlandstalige versie. -### Specifieke iconen +## Specifieke iconen * Icoon voor `amenity=fast_food` + `cuisine=friture` * Icoon voor `craft=brewery` or `industrial=brewery` -### Hoe de basiskaart gebruiken? +## Hoe de basiskaart gebruiken? Je kan de versies van de basiskaart hier zien: . @@ -32,13 +32,13 @@ Gedetailleerde info om ze via _[OpenLayers](https://openlayers.org/)_ of _[Leafl **We vragen wel de [gebruiksvoorwaarden](https://github.com/jbelien/openstreetmap-carto-be/wiki/Tile-Usage-Policy) te respecteren!** -### Project documentatie +## Project documentatie * Aangepaste OSMBE kaartstijl: * Documentatie: * Gebruiksvoorwaarden: -### Project key events +## Project key events We hebben eerst geprobeerd om de OSMBE basemap te maken als VectorTiles, maar de technologie was daar toen nog niet rijp voor. Dus we gebruiken de klassieke rastertiles op basis van de documentatie op : diff --git a/content/projects/heritage-crowd-sourced.en.md b/content/projects/heritage-crowd-sourced.en.md index b3ae8e8..ec4fc8c 100644 --- a/content/projects/heritage-crowd-sourced.en.md +++ b/content/projects/heritage-crowd-sourced.en.md @@ -14,7 +14,7 @@ crowdsourced projects such as [OpenStreetMap](http://www.openstreetmap.org) and In Belgium, the list of immovable heritage is controlled by three agencies, one for Flanders, one for Brussels and one for Wallonia. In Flanders, the agency is called [Agentschap Onroerend Erfgoed](https://www.onroerenderfgoed.be/). They make a catalogue of the items and decide on the protection. They also provide some of [their data](https://www.onroerenderfgoed.be/nl/onderzoek/wetenschappelijke-inventarissen) as open data. In their catalogue they have churches, abbeys, castles, but also small farmhouses and villas, furthermore it includes small items such as boundary stones and pillories. Occasionally, the list contains important trees on town squares. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-d6gBQB4/0/X3/Schandpaal%2C_Laar%2C_Aartselaar%20%282%29-X3.jpg" title="Pillory in Aartselaar" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-d6gBQB4/0/X3/Schandpaal%2C_Laar%2C_Aartselaar%20%282%29-X3.jpg" title="Pillory in Aartselaar" >}} What is a crowdsourced project? It is a project in which everybody can add data, unlike projects that are run by companies, where only employees can add data. When a company owns that data it can set the rules and price to get access to the data. In a crowdsourced project, normally the resulting database is free to use and consult. If you want to find out more about crowdsourcing, read the [Wikipedia article](https://en.wikipedia.org/wiki/Crowdsourcing) on the topic. @@ -52,11 +52,11 @@ OpenStreetMap is for a large part based on original survey. That means that the My starting point is the list of immovable heritage items on Wikipedia. For Flanders, previous contributors have compiled a [list of items per village](https://nl.wikipedia.org/wiki/Cultureel_erfgoed_in_Belgi%C3%AB). I wrote a [Python](https://en.wikipedia.org/wiki/Python_(programming_language)) program that converts such a wiki-page into a file with [waypoints](https://en.wikipedia.org/wiki/Waypoint) that can be used on a GPS-device or in navigation programs for smartphones such as [OsmAnd](http://osmand.net/). -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Screenshots-1/i-8ntJtzd/0/O/70.jpg" alt="Garmin Dakota 10 with waypoints" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Screenshots-1/i-8ntJtzd/0/O/70.jpg" alt="Garmin Dakota 10 with waypoints" >}} -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Screenshots-1/i-63Fvk2T/0/O/92%20copy.jpg" caption="Garmin Dakota 10 showing heritage items as red and blue flags, as well as some details on the item" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Screenshots-1/i-63Fvk2T/0/O/92%20copy.jpg" caption="Garmin Dakota 10 showing heritage items as red and blue flags, as well as some details on the item" >}} -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-4LK2Lp4/0/O/Screenshot_2017-03-27-14-38-59.png" caption="In OsmAnd the waypoints are displayed as red circles with white star. Clicking on a star shows additional information at the bottom of the screen. In case there are multiple items close to one another, the details are listed for each item" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-4LK2Lp4/0/O/Screenshot_2017-03-27-14-38-59.png" caption="In OsmAnd the waypoints are displayed as red circles with white star. Clicking on a star shows additional information at the bottom of the screen. In case there are multiple items close to one another, the details are listed for each item" >}} This allows me to make small detours during my planned walks in order to visit (or view) the historical items. At the location I check whether the item still exists and take pictures of it. When the item no longer exists, I inform the Onroerend Erfgoed agency later on so they can update their database as well. I have the impression that they appreciate this kind of feedback. @@ -72,7 +72,7 @@ I also add the building layout to OpenStreetMap, and add the necessary tags to m Adding the necessary tags is easy in [JOSM](https://josm.openstreetmap.de/), especially when you use the preset for historical objects found in the [BENELUX presets](https://josm.openstreetmap.de/wiki/Presets/BENELUX). -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-pW9ptVd/0/X3/Screen%20Shot%202017-03-27%20at%2015.20.47-X3.png" caption="BENELUX Preset for monuments protected by Onroerend Erfgoed" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-pW9ptVd/0/X3/Screen%20Shot%202017-03-27%20at%2015.20.47-X3.png" caption="BENELUX Preset for monuments protected by Onroerend Erfgoed" >}} You can also start writing Wikipedia articles for the items and/or create a Wikidata item with some properties. I recently started adding items for churches in Flanders based on information found the in the Onroerend Erfgoed and [ODIS](http://www.odis.be/) databases. @@ -90,37 +90,37 @@ There are a number of maps based on OpenStreetMap that show those items. Is a [map](http://histosm.org/) created by University of Heidelberg GIScience (Geoinformatics) Research Group. [More information](https://wiki.openstreetmap.org/wiki/HistOSM) -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-ChHBNKX/0/X3/Screen%20Shot%202017-03-27%20at%2013.54.30-X3.png" caption="HistOSM, all data (c) OpenStreetMap Contributors" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-ChHBNKX/0/X3/Screen%20Shot%202017-03-27%20at%2013.54.30-X3.png" caption="HistOSM, all data (c) OpenStreetMap Contributors" >}} #### Historic Places Is a [map](http://gk.historic.place) developed by some German enthusiasts in their spare time. It is available is several languages and has some [nice features](https://wiki.openstreetmap.org/wiki/Historical_Objects) such as the possibility to display old maps instead of contemporary maps based on OpenStreetMap data. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-NkHdJQ7/0/X3/Screen%20Shot%202017-03-27%20at%2021.07.04-X3.png" caption="Historic Places, all data (c) OpenStreetMap Contributors. Topographical Map Vandermaelen." >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-NkHdJQ7/0/X3/Screen%20Shot%202017-03-27%20at%2021.07.04-X3.png" caption="Historic Places, all data (c) OpenStreetMap Contributors. Topographical Map Vandermaelen." >}} Each historic feature has a popup window which shows the information about the item as it is stored in the OpenStreetMap database. The popup can contain links to Onroerend Erfgoed (if there is a tag ...), wikipedia and wikidata. The tag *image* is recognized and will display the image if it is released under an open license (as is the case for images on Wikimedia Commons). The tag *wikimedia_commons* is also recognized and the link will bring you to the Wikimedia Commons page displaying the category with all images on the item. The wikidata tag can not only be explored on the wikidata.org website, but also in "beautified" pages such as [Reasonator](https://tools.wmflabs.org/reasonator/) and [Sqid](https://tools.wmflabs.org/sqid) when you click on the icons next to the Wikidata item number. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-DxtJ6nf/0/X3/Screen%20Shot%202017-03-27%20at%2013.53.21-X3.png" title="Reasonator for Q28464643" caption="The Sint-Pieterskerk in Rumst as seen on the Reasonator website with data from Wikidata" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-DxtJ6nf/0/X3/Screen%20Shot%202017-03-27%20at%2013.53.21-X3.png" title="Reasonator for Q28464643" caption="The Sint-Pieterskerk in Rumst as seen on the Reasonator website with data from Wikidata" >}} If you look at a Reasonator page such as the one for the [Parochiekerk Sint-Pieter (Q28464643)](https://tools.wmflabs.org/reasonator/?q=Q28464643), you will find a link to "Overpass" under the maps. This will show the item on OpenStreetMap. So it is possible to define user interfaces on either Wikidata or OpenStreetMap and jump to the other project. The result of clicking the [Overpass](http://overpass-turbo.eu) link on the above Reasonator page, shows the following page in which the Sint-Pieterskerk is highlighted and positioned in the middle of the visible map. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-v2vQxHG/0/X3/Screen%20Shot%202017-03-27%20at%2014.00.42-X3.png" caption="Overpass UI showing the item with Wikidata identifier Q28464643" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-v2vQxHG/0/X3/Screen%20Shot%202017-03-27%20at%2014.00.42-X3.png" caption="Overpass UI showing the item with Wikidata identifier Q28464643" >}} ### Wikidata Since the data in Wikidata is structured, unlike the full text sentences in Wikipedia, one can query the data. This makes it e.g. possible to create a [time line](http://tinyurl.com/zso674w) with the inception date of Belgian churches, or a [bubble chart](http://tinyurl.com/myfpwqm) with their architectural styles. By clicking on the links in this paragraph, you are taken to the query site of Wikidata where you can run the queries and explore the data yourself. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-MGNPLd8/0/X3/Screen%20Shot%202017-03-27%20at%2013.51.04-X3.png" caption="A time line of churches in Belgium" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-MGNPLd8/0/X3/Screen%20Shot%202017-03-27%20at%2013.51.04-X3.png" caption="A time line of churches in Belgium" >}} -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-s544Ndb/0/X2/Screen%20Shot%202017-03-27%20at%2020.45.47-X2.png" caption="Architectural Styles used in Belgian churches" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-s544Ndb/0/X2/Screen%20Shot%202017-03-27%20at%2020.45.47-X2.png" caption="Architectural Styles used in Belgian churches" >}} You can also make maps that combine Wikidata with OpenStreetMap shapes. The following map retrieves all Belgian churches from Wikidata when they have an inception date. According to this date, they get a different colour. The shape is taken from OpenStreetMap. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-gKKpzrr/0/X2/Screen%20Shot%202017-04-01%20at%2021.33.00-X2.png" caption="Combining Wikidata and OpenStreetMap" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-gKKpzrr/0/X2/Screen%20Shot%202017-04-01%20at%2021.33.00-X2.png" caption="Combining Wikidata and OpenStreetMap" >}} You can look at the map on my Wikimedia [user page](https://www.mediawiki.org/wiki/User:Funkyxian) and explore the data yourself, or look at the code used to generate the map. diff --git a/content/projects/heritage-crowd-sourced.fr.md b/content/projects/heritage-crowd-sourced.fr.md index 35135ce..a097cf0 100644 --- a/content/projects/heritage-crowd-sourced.fr.md +++ b/content/projects/heritage-crowd-sourced.fr.md @@ -26,7 +26,7 @@ inclut de petits éléments tels que des bornes frontières et piloris. Occasionelllement, le catalogue contient aussi des arbres remarquables sur des places en milieu urbain. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-d6gBQB4/0/X3/Schandpaal%2C_Laar%2C_Aartselaar%20%282%29-X3.jpg" title="Pilori à Aartselaar" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-d6gBQB4/0/X3/Schandpaal%2C_Laar%2C_Aartselaar%20%282%29-X3.jpg" title="Pilori à Aartselaar" >}} Qu'est-ce qu'un projet de crowdsourcing? C'est un projet dans lequel chacun peut ajouter des données, a contrario des projets privés @@ -103,11 +103,11 @@ qui convertit une page de Wikipedia de ce type en un fichier avec des utilisé dans un GPS ou dans des applications de navigation sur smartphone comme [OSMAnd](http://osmand.net/). -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Screenshots-1/i-8ntJtzd/0/O/70.jpg" alt="Garmin Dakota 10 with waypoints" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Screenshots-1/i-8ntJtzd/0/O/70.jpg" alt="Garmin Dakota 10 with waypoints" >}} -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Screenshots-1/i-63Fvk2T/0/O/92%20copy.jpg" caption="Garmin Dakota 10 avec des éléments du patrimoine mis en évidence en rouge et bleu" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Screenshots-1/i-63Fvk2T/0/O/92%20copy.jpg" caption="Garmin Dakota 10 avec des éléments du patrimoine mis en évidence en rouge et bleu" >}} -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-4LK2Lp4/0/O/Screenshot_2017-03-27-14-38-59.png" caption="Dans OSMAnd, les waypoints sont affichés avec des étoiles blanches entourés par un cercle rouge. Cliquer sur une étoile montre des informations additionelles en bas de l'écran. Dans le cas où il y a plusieurs éléments proches les uns des autres, les détails sont listés pour chaque élément." >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-4LK2Lp4/0/O/Screenshot_2017-03-27-14-38-59.png" caption="Dans OSMAnd, les waypoints sont affichés avec des étoiles blanches entourés par un cercle rouge. Cliquer sur une étoile montre des informations additionelles en bas de l'écran. Dans le cas où il y a plusieurs éléments proches les uns des autres, les détails sont listés pour chaque élément." >}} Cela me permet de faire de petits détours durant mes promenades en vue de visiter des éléments du patrimoine. Lorsque j'arrive à l'endroit, je @@ -142,7 +142,7 @@ ajoutés dans OpenStreetMap. Ajouter ces tags est facile dans [JOSM](https://josm.openstreetmap.de/), particulièrement lorsque vous utilisez le preset pour les éléments historiques du [preset BENELUX](https://josm.openstreetmap.de/wiki/Presets/BENELUX). -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-pW9ptVd/0/X3/Screen%20Shot%202017-03-27%20at%2015.20.47-X3.png" caption="BENELUX Preset pour les monuments protégés par Onroerend Erfgoed" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-pW9ptVd/0/X3/Screen%20Shot%202017-03-27%20at%2015.20.47-X3.png" caption="BENELUX Preset pour les monuments protégés par Onroerend Erfgoed" >}} Vous pouvez également démarrer l'écriture des articles Wikipedia et créer un élément Wikidata avec quelques propriétés. J'ai récemment @@ -167,13 +167,13 @@ Il y a un grand nombre de cartes basées sur OpenStreetMap qui montrent ces él C'est une [carte](http://histosm.org/) créée par l'Université de Heidelberg, GIScience (Geoinformatics) Research Group. Plus d'[information](https://wiki.openstreetmap.org/wiki/HistOSM) -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-ChHBNKX/0/X3/Screen%20Shot%202017-03-27%20at%2013.54.30-X3.png" caption="HistOSM, all data (c) OpenStreetMap Contributors" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-ChHBNKX/0/X3/Screen%20Shot%202017-03-27%20at%2013.54.30-X3.png" caption="HistOSM, all data (c) OpenStreetMap Contributors" >}} #### Historic Places C'est une [carte](http://gk.historic.place/) développée par des contributeurs allemands passionnés durant leur temps libre. Elle est disponible en plusieurs langues et possède des [fonctionnalités intéressantes](https://wiki.openstreetmap.org/wiki/Historical_Objects) comme la possibilité d'afficher des cartes anciennes à la place des cartes contemporaines basées sur OpenStreetMap. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-NkHdJQ7/0/X3/Screen%20Shot%202017-03-27%20at%2021.07.04-X3.png" caption="Historic Places, all data (c) OpenStreetMap Contributors. Topographical Map Vandermaelen." >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-NkHdJQ7/0/X3/Screen%20Shot%202017-03-27%20at%2021.07.04-X3.png" caption="Historic Places, all data (c) OpenStreetMap Contributors. Topographical Map Vandermaelen." >}} Chaque élément historique a une fenêtre popup qui contient des informations issues de celles contenus dans la base de données @@ -191,7 +191,7 @@ wikidata.org, mais aussi dans des sites web améliorées comme [Sqid](https://tools.wmflabs.org/sqid), quand vous cliquez sur les icônes à côté du numéro Wikidata. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-DxtJ6nf/0/X3/Screen%20Shot%202017-03-27%20at%2013.53.21-X3.png" title="Reasonator for Q28464643" caption="L'église Saint-Pierre de Rumst vue sur le site web Reasonator avec des données de Wikidata" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-DxtJ6nf/0/X3/Screen%20Shot%202017-03-27%20at%2013.53.21-X3.png" title="Reasonator for Q28464643" caption="L'église Saint-Pierre de Rumst vue sur le site web Reasonator avec des données de Wikidata" >}} Si vous regardez à une page Reasonator telle que celle pour la [Parochiekerk Sint-Pieter (Q28464643)](https://tools.wmflabs.org/reasonator/?q=Q28464643), vous @@ -204,7 +204,7 @@ de cette page Reasonator montre la page suivante dans laquelle l'église Saint-Pierre (Sint-Pieterskerk) est mise en évidence et positionnée au centre de la carte. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-v2vQxHG/0/X3/Screen%20Shot%202017-03-27%20at%2014.00.42-X3.png" caption="Interface utilisateur *Overpass* montrant l'élément avec l'identifiant Wikidata Q28464643" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-v2vQxHG/0/X3/Screen%20Shot%202017-03-27%20at%2014.00.42-X3.png" caption="Interface utilisateur *Overpass* montrant l'élément avec l'identifiant Wikidata Q28464643" >}} ### Wikidata @@ -217,9 +217,9 @@ paragraphe, vous serez amenés au site d'interrogation de Wikidata où vous pourrez lancer des interrogations et explorer les données vous-mêmes. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-MGNPLd8/0/X3/Screen%20Shot%202017-03-27%20at%2013.51.04-X3.png" caption="Ligne du temps de la construction des églises en Belgique" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-MGNPLd8/0/X3/Screen%20Shot%202017-03-27%20at%2013.51.04-X3.png" caption="Ligne du temps de la construction des églises en Belgique" >}} -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-s544Ndb/0/X2/Screen%20Shot%202017-03-27%20at%2020.45.47-X2.png" caption="Les styles architecturaux utilisés dans les églises en Belgique" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-s544Ndb/0/X2/Screen%20Shot%202017-03-27%20at%2020.45.47-X2.png" caption="Les styles architecturaux utilisés dans les églises en Belgique" >}} Vous pouvez également créer des cartes combinant Wikidata avec OpenStreetMap. La carte suivante affiche toutes les églises de Belgique @@ -227,7 +227,7 @@ depuis Wikidata lorsque celles-ci ont une date de conception. Elles ont une couleur différente en fonction de cette date de conception. La forme de l'église est prise d'OpenStreetMap. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-gKKpzrr/0/X2/Screen%20Shot%202017-04-01%20at%2021.33.00-X2.png" caption="Combining Wikidata and OpenStreetMap" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-gKKpzrr/0/X2/Screen%20Shot%202017-04-01%20at%2021.33.00-X2.png" caption="Combining Wikidata and OpenStreetMap" >}} Vous pouvez regarder cette carte sur ma page d'[utilisateur](https://www.mediawiki.org/wiki/User:Funkyxian) Wikimedia et explorer les données vous-mêmes, ou bien regarder au code utilisé diff --git a/content/projects/heritage-crowd-sourced.nl.md b/content/projects/heritage-crowd-sourced.nl.md index 58259b5..819c982 100644 --- a/content/projects/heritage-crowd-sourced.nl.md +++ b/content/projects/heritage-crowd-sourced.nl.md @@ -12,7 +12,7 @@ In dit artikel wil ik tonen hoe je informatie over onroerend erfgoed kan toevoeg In België wordt de lijst van onroerend erfgoed beheerd door drie agentschappen, een voor Vlaanderen, een voor Brussel en een voor Wallonië. Voor Vlaanderen is er het [Agentschap Onroerend Erfgoed](https://www.onroerenderfgoed.be/). Zij maken een inventaris van de objecten en bepalen de bescherming ervan. Ze stellen ook sommige van [hun gegevens](https://www.onroerenderfgoed.be/nl/onderzoek/wetenschappelijke-inventarissen) beschikbaar als open data. Zo hebben ze in hun inventaris kerken, abdijen en kastelen, maar ook kleine boerderijhuizen en villa's, en ook kleine objecten zoals grenspalen en schandpalen. Af en toe vind je er ook belangrijke bomen op dorpspleinen in. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-d6gBQB4/0/X3/Schandpaal%2C_Laar%2C_Aartselaar%20%282%29-X3.jpg" title="Schandpaal in Aartselaar" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-d6gBQB4/0/X3/Schandpaal%2C_Laar%2C_Aartselaar%20%282%29-X3.jpg" title="Schandpaal in Aartselaar" >}} Wat is een crowdsourced project? Dat is een project waarin iedereen data kan toevoegen, in tegenstelling tot projecten van bedrijven waar enkel werknemers dat kunnen. Als een bedrijf die data bezit, kan het de regels en prijs betalen om er toegang tot te krijgen. In veel crowdsourced projecten is het resultaat vrij te gebruiken en te raadplegen. Als je meer wil leren over crowdsourcing, kan je de [Engelstalige](https://en.wikipedia.org/wiki/Crowdsourcing) of [Nederlandstalige](https://nl.wikipedia.org/wiki/Crowdsourcing) Wikipedia-artikels erover lezen. @@ -48,11 +48,11 @@ OpenStreetMap is voor een groot stuk gebaseerd op origineel onderzoek ter plaats Ik begin bij een lijst van onroerend erfgoed op Wikipedia. Voor Vlaanderen hebben vorige bijdragers [een lijst van items per gemeente](https://nl.wikipedia.org/wiki/Cultureel_erfgoed_in_Belgi%C3%AB) gemaakt. Ik heb een [Python](https://en.wikipedia.org/wiki/Python_(programming_language))script geschreven dat zulke wikipagina's omzet in een bestand met [waypoints](https://nl.wikipedia.org/wiki/Waypoint) dat gebruikt kan worden op een GPS-systeem of in navigatieapps op smartphones, zoals [OsmAnd](https://osmand.net/). -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Screenshots-1/i-8ntJtzd/0/O/70.jpg" alt="Garmin Dakota 10 met waypoints" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Screenshots-1/i-8ntJtzd/0/O/70.jpg" alt="Garmin Dakota 10 met waypoints" >}} -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Screenshots-1/i-63Fvk2T/0/O/92%20copy.jpg" caption="Garmin Dakota 10 met erfgoedobjecten weergegeven als rode en blauwe vlaggetjes, en wat informatie over het object" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/Screenshots-1/i-63Fvk2T/0/O/92%20copy.jpg" caption="Garmin Dakota 10 met erfgoedobjecten weergegeven als rode en blauwe vlaggetjes, en wat informatie over het object" >}} -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-4LK2Lp4/0/O/Screenshot_2017-03-27-14-38-59.png" caption="In OsmAnd worden waypoints getoond als rode cirkels met een witte ster. Klikken op zo'n stericoon toont informatie onderaan het scherm. Als er meerdere items dicht bij elkaar staan, wordt een lijst getoond en kan het gewenste item geselecteerd worden" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-4LK2Lp4/0/O/Screenshot_2017-03-27-14-38-59.png" caption="In OsmAnd worden waypoints getoond als rode cirkels met een witte ster. Klikken op zo'n stericoon toont informatie onderaan het scherm. Als er meerdere items dicht bij elkaar staan, wordt een lijst getoond en kan het gewenste item geselecteerd worden" >}} Dit laat me toe kleine omwegen te maken in mijn wandelingen om historisch erfgoed te bezoeken of bekijken. Ter plaatse kijk ik dan of het object nog bestaat en neem ik er foto's van. Als het niet meer bestaat, geef ik dat door aan het agentschap Onroerend Erfgoed zodat ze ook hun eigen databank kunnen bijwerken. Ik heb de indruk dat ze zo'n feedback wel waarderen. @@ -68,7 +68,7 @@ Ik voeg de gebouw-layout ook toe aan OpenStreetMap, en voeg ook de nodige erfgoe De nodige tags toevoegen is gemakkelijk in [JOSM](https://josm.openstreetmap.de/), vooral als je de preset voor historische objecten gebruikt uit de [BENELUX-presets](https://josm.openstreetmap.de/wiki/Presets/BENELUX). -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-pW9ptVd/0/X3/Screen%20Shot%202017-03-27%20at%2015.20.47-X3.png" caption="BENELUX-preset voor monumenten die beschermd worden door Onroerend Erfgoed" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-pW9ptVd/0/X3/Screen%20Shot%202017-03-27%20at%2015.20.47-X3.png" caption="BENELUX-preset voor monumenten die beschermd worden door Onroerend Erfgoed" >}} Je kan ook Wikidataitems maken (vrij simpel) en/of Wikipedia-artikels beginnen schrijven over de objecten. Ik ben recentelijk begonnen met Wikidataitems maken voor kerken in Vlaanderen, gebaseerd op informatie van Onroerend Erfgoed en [ODIS](https://www.odis.be/). @@ -86,25 +86,25 @@ Er zijn verschillende kaarten gebaseerd op OpenStreetMap die deze objecten tonen [HistOsm](http://histosm.org/) is een kaart gemaakt door de geoinformaticaonderzoeksgroep van de Universiteit Heidelberg. [Meer informatie in het Engels op de OpenStreetMap-wiki](https://wiki.openstreetmap.org/wiki/HistOSM) -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-ChHBNKX/0/X3/Screen%20Shot%202017-03-27%20at%2013.54.30-X3.png" caption="HistOSM, alle gegevens ©OpenStreetMap-bijdragers" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-ChHBNKX/0/X3/Screen%20Shot%202017-03-27%20at%2013.54.30-X3.png" caption="HistOSM, alle gegevens ©OpenStreetMap-bijdragers" >}} #### Historic Places [Historic Places](http://gk.historic.place) is een kaart door Duitse enthousiastelingen, ontwikkeld in hun vrije tijd. Het is beschikbaar in verschillende talen en heeft enkele [leuke features](https://wiki.openstreetmap.org/wiki/Historical_Objects) zoals de mogelijkheid om oude kaarten te tonen in plaats van hedendaagse OpenStreetMapkaarten. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-NkHdJQ7/0/X3/Screen%20Shot%202017-03-27%20at%2021.07.04-X3.png" caption="Historic Places, all data (c) OpenStreetMap Contributors. Topographical Map Vandermaelen." >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-NkHdJQ7/0/X3/Screen%20Shot%202017-03-27%20at%2021.07.04-X3.png" caption="Historic Places, all data (c) OpenStreetMap Contributors. Topographical Map Vandermaelen." >}} Over elk historisch object kan je een popupvenster openen met meer informatie over het item zoals het in de OpenStreetMapdatabank staat. Die popup bevat links naar Onroerend Erfgoed, Wikipedia en Wikidata (als die tags toegevoegd zijn in OSM). De tag *image* wordt ook herkend en zal een afbeelding tonen, als die beschikbaar is onder een vrije licentie (voor alle afbeeldingen op Wikimedia Commons is dat steeds zo). De tag *wikimedia_commons* wordt ook herkend en de link brengt je naar de categorie met mediabestanden over dat object. Wikidataitems kun je niet alleen op wikidata.org bekijken, maar ook in mooiere pagina's zoals [Reasonator](https://tools.wmflabs.org/reasonator/) en [Sqid](https://tools.wmflabs.org/sqid) wanneer je klikt op de icoontjes naast het Wikidataitemnummer. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-DxtJ6nf/0/X3/Screen%20Shot%202017-03-27%20at%2013.53.21-X3.png" title="Reasonator voor Q28464643" caption="De Sint-Pieterskerk in Rumst op de Reasonatorwebsite, met data van Wikidata" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-DxtJ6nf/0/X3/Screen%20Shot%202017-03-27%20at%2013.53.21-X3.png" title="Reasonator voor Q28464643" caption="De Sint-Pieterskerk in Rumst op de Reasonatorwebsite, met data van Wikidata" >}} Als je een Reasonatorpagina bekijkt, zoals die voor de [Parochiekerk Sint-Pieter (Q28464643)](https://tools.wmflabs.org/reasonator/?q=Q28464643), vind je onder de kaarten een link naar "Overpass". Dat kan je naar het item op OpenStreetMap brengen. Het is dus mogelijk om gebruikersinterfaces te maken gebaseerd op Wikidata of OpenStreetMap en te koppelen naar het andere project. Het resultaat van klikken op de [Overpass](https://overpass-turbo.eu)-link op de Reasonatorpagina die hierboven staat, brengt je naar de volgende pagina waarop de Sint-Pieterskerk gemarkeerd is en in het midden van de getoonde kaart staat. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-v2vQxHG/0/X3/Screen%20Shot%202017-03-27%20at%2014.00.42-X3.png" caption="De Overpass-gebruikersinterface die het OpenStreetMapobject met Wikidata-id Q28464643 toont" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-v2vQxHG/0/X3/Screen%20Shot%202017-03-27%20at%2014.00.42-X3.png" caption="De Overpass-gebruikersinterface die het OpenStreetMapobject met Wikidata-id Q28464643 toont" >}} ### Wikidata @@ -114,13 +114,13 @@ te maken met de bouwdatum van Belgische kerken, of een [bellengrafiek](https://query.wikidata.org/#%23defaultView%3ABubbleChart%0ASELECT%20DISTINCT%20%3Farchitecture%20%3FarchitectureLabel%20%3Fcount%0AWHERE%20%7B%0A%20%20%20%20%7B%0A%20%20%20%20SELECT%20%3Farchitecture%20%28COUNT%28%3Fchurch%29%20AS%20%3Fcount%29%20WHERE%20%7B%0A%20%20%20%20%20%20%3Fchurch%20%28wdt%3AP31%2Fwdt%3AP279%2a%29%20wd%3AQ16970.%0A%09%20%20%3Fchurch%20wdt%3AP17%20wd%3AQ31.%0A%20%20%20%20%20%20%3Fchurch%20wdt%3AP149%20%3Farchitecture.%20%0A%20%20%20%7D%0A%20%20%20%20GROUP%20BY%20%3Farchitecture%0A%20%20%7D%0A%20%20SERVICE%20wikibase%3Alabel%20%7B%20bd%3AserviceParam%20wikibase%3Alanguage%20%22nl%2Cfr%2Cen%22.%20%7D%0A%7D%0A) met hun architecturale stijlen. Door te klikken op de links in deze paragraaf, word je naar de query-site van Wikidata genomen waar je de query's kan uitvoeren en zelf de data verkennen. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-MGNPLd8/0/X3/Screen%20Shot%202017-03-27%20at%2013.51.04-X3.png" caption="Een tijdlijn van kerken in België" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-MGNPLd8/0/X3/Screen%20Shot%202017-03-27%20at%2013.51.04-X3.png" caption="Een tijdlijn van kerken in België" >}} -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-s544Ndb/0/X2/Screen%20Shot%202017-03-27%20at%2020.45.47-X2.png" caption="Architecturale stijlen gebruikt voor Belgische kerken" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-s544Ndb/0/X2/Screen%20Shot%202017-03-27%20at%2020.45.47-X2.png" caption="Architecturale stijlen gebruikt voor Belgische kerken" >}} Je kan ook kaarten maken die Wikidata combineren met OpenStreetMap-vormen. De volgende kaart haalt alle Belgische kerken op van Wikidata als er een bouwdatum voor bekend is. Op basis van deze datum wordt de kleur gekozen. De vorm is uit OpenStreetMap overgenomen. -{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-gKKpzrr/0/X2/Screen%20Shot%202017-04-01%20at%2021.33.00-X2.png" caption="Wikidata en OpenStreetMap combineren" >}}{{< mdl-disable "" >}} +{{< figure src="https://photos.smugmug.com/OSM/Screenshots/HeritageCrowdSourced/i-gKKpzrr/0/X2/Screen%20Shot%202017-04-01%20at%2021.33.00-X2.png" caption="Wikidata en OpenStreetMap combineren" >}} Je kan deze kaart bekijken op mijn Wikimedia-[gebruikerspagina](https://www.mediawiki.org/wiki/User:Funkyxian) en de data zelf verkennen, of de code bekijken waarmee de kaart gegenereerd is. diff --git a/content/projects/mapathons.en.md b/content/projects/mapathons.en.md index ec62958..772a36d 100644 --- a/content/projects/mapathons.en.md +++ b/content/projects/mapathons.en.md @@ -10,7 +10,7 @@ weight: 50 Each year, disasters around the world kill nearly 100,000 and affect or displace 200 million people. Many of the places where these disasters occur are literally 'missing' from any map and first responders lack the information to make valuable decisions regarding relief efforts.Missing Maps is an open, collaborative project in which you can help to map areas where humanitarian organisations are trying to meet the needs of vulnerable people. During a Mapathon, you will trace satellite imagery to identify buildings, residential areas and streets. Later, people with local knowledge will add more detail to the map. But from the moment you click Save, the data will be freely available to NGOs and anyone who needs it. For example, during the National Mapathon, we mapped all the buildings on Idjwi island. Within two weeks, the vaccination campaign on that island was planned using population estimates based on our buildings data. Anyone can help! All it takes is a laptop and a computer mouse. We will teach you everything else you need to know. - + Do you want a Mapathon near you? [Contact us]({{< ref "contact.md" >}}) ! We have had several Mapathons in Brussels, Antwerp, and Ghent, and there have been events in Leuven, Namur, Liege, Louvain-La-Neuve. diff --git a/content/projects/mapathons.fr.md b/content/projects/mapathons.fr.md index 2723842..eabf124 100644 --- a/content/projects/mapathons.fr.md +++ b/content/projects/mapathons.fr.md @@ -10,7 +10,7 @@ weight: 50 Each year, disasters around the world kill nearly 100,000 and affect or displace 200 million people. Many of the places where these disasters occur are literally 'missing' from any map and first responders lack the information to make valuable decisions regarding relief efforts.Missing Maps is an open, collaborative project in which you can help to map areas where humanitarian organisations are trying to meet the needs of vulnerable people. During a Mapathon, you will trace satellite imagery to identify buildings, residential areas and streets. Later, people with local knowledge will add more detail to the map. But from the moment you click Save, the data will be freely available to NGOs and anyone who needs it. For example, during the National Mapathon, we mapped all the buildings on Idjwi island. Within two weeks, the vaccination campaign on that island was planned using population estimates based on our buildings data. Anyone can help! All it takes is a laptop and a computer mouse. We will teach you everything else you need to know. - + Do you want a Mapathon near you? [Contact us]({{< ref "contact.md" >}}) ! We have had several Mapathons in Brussels, Antwerp, and Ghent, and there have been events in Leuven, Namur, Liege, Louvain-La-Neuve. diff --git a/content/projects/road-completion.en.md b/content/projects/road-completion.en.md index 07e979f..1af4474 100644 --- a/content/projects/road-completion.en.md +++ b/content/projects/road-completion.en.md @@ -9,7 +9,7 @@ aliases: ["/2017/01/06/en-project-road-completion.html"] We're called OpenSTREETMap for a reason: we have an excellent road network. With turn restrictions and lane navigation, hiking paths and cycle lanes. But there are still some basic mistakes here and there. We aim to correct these mistakes by using open government datasets to verify and detect missing data. Meanwhile, we'll improve government data too, and offer you a guaranteed minimum quality. -### Crowdsourcing, Open Data and Machine Learning +## Crowdsourcing, Open Data and Machine Learning As we are crowdsourcers, every mistake that our crowd sees will be corrected. But some changes aren't very visible. For example, a new road with just a few houses, without connections. A name change of a road, or a misspelled road name. Or a road that was mapped back when aerial imagery was much lower quality. @@ -19,7 +19,7 @@ As a community, we want to build the tools to make sure that any correction in t {{< figure src="images/posts/road-completion.gif" caption="The evolution of mapping roads in Brussels. Green: slow roads. Grey: mapped roads. Black: roads being worked on that month" >}} -### Trust +## Trust OpenStreetMap grows in a chaotic way. In some places, data quality is amazing. In others, the map is still very basic. More importantly: the map comes without any guarantees. We want to build trust in the data by offering a simple guarantee: OSM is just as complete as the government dataset. With the tool we built, you can check at any time how many road segments the government has and OpenStreetMap does not. Hopefully, that will make OSM in Belgium usable in even more cases because there is a metric of completeness. @@ -27,7 +27,7 @@ OpenStreetMap grows in a chaotic way. In some places, data quality is amazing. I You can [follow up on the number of missing roads here](https://osmbe.github.io/road-completion/). -### Current status +## Current status - Comparison process is running every week for [Flanders](https://github.com/osmbe/road-completion/tree/master/data/belgium/flanders/difference) and [Brussels](https://github.com/osmbe/road-completion/tree/master/data/belgium/brussels/difference) - Comparison process is run manually for [Wallonia](https://github.com/osmbe/road-completion/tree/master/data/belgium/wallonia/difference) @@ -35,7 +35,7 @@ You can [follow up on the number of missing roads here](https://osmbe.github.io/ - You can [follow up on the number of missing roads here](https://osmbe.github.io/road-completion/). - Digitaal Vlaanderen has processed our feedback for Flanders. While our mappers used the government data, they spotted 561 cases where the official data was probably wrong. This resulted in corrections on their end in 90% of the cases. -### Project key events +## Project key events - Exploration of Wegenregister as a source, with mapping layers and downloadable GPX files ([diary entry](http://www.openstreetmap.org/user/joost%20schouppe/diary/39250)) - The other way around: validating Wegenregister with OSM in Antwerp ([diary entry](http://www.openstreetmap.org/user/joost%20schouppe/diary/39573)) diff --git a/content/projects/road-completion.fr.md b/content/projects/road-completion.fr.md index a4edfcd..e7eec49 100644 --- a/content/projects/road-completion.fr.md +++ b/content/projects/road-completion.fr.md @@ -9,7 +9,7 @@ aliases: ["/2017/01/06/fr-project-road-completion.html"] Nous nous appelons Open**STREET**Map pour une raison: nous avons un excellent réseau routier. Il y a les "turn restrictions" et la navigation entre les différentes voies de la route, les sentiers de randonnée et les pistes cyclables. Mais il y a encore quelques petites erreurs qui traînent par ci par là. Notre objectif est de corriger ces erreurs en utilisant les données libres d'accès ("open-data") officielles pour vérifier et détecter les données manquantes. Nous en profitons également pour améliorer les données officielles et vous offrir une qualité minimale garantie. -### Crowdsourcing and Open Data +## Crowdsourcing and Open Data Puisque la carte est créée par les contributeurs, chaque erreur que nous voyons sera corrigée. Mais quelques modifications de la carte ne sont pas parfois pas très visibles. Par exemple, une nouvelle route avec juste deux, trois maisons, sans aucune connexion ; le changement de nom d'une route, ou une erreur dans le nom d'une route ; ou encore une route qui a été tracée sur base d'anciennes photos aériennes de mauvaise qualité. @@ -17,7 +17,7 @@ Comme le gouvernement a enfin décidé de donner un accès libre à ses données {{< figure src="images/posts/road-completion.gif" caption="L'évolution de la cartographie des routes à Bruxelles. Vert: routes \"lentes\". Gris: routes cartographiées. Noir: routes ajouté ce mois-là." >}} -### Assurances qualité +## Assurances qualité En tant que communauté, nous voulons construire des outils pour nous assurer que toute correction apportée aux ensembles routiers de données officielles est rendue accessible pour la communauté qui cartographie aussi rapidement et aussi précisément que possible. La Flandre n'étant pas la seule entité à publier de tels outils, nous allons essayer de construire quelque chose qui est facilement adaptable à n'importe quel jeu de données des axes routiers dans le monde entier. @@ -27,7 +27,7 @@ Une fois que ces outils sont opérationnels et que nous avons effectué une prem Vous pouvez aider: [voici les instructions](https://wiki.openstreetmap.org/wiki/WikiProject_Belgium/Road_completion_project/Instructions) -### Événements clés +## Événements clés * Exploration de "Wegenregister" comme source, avec couches cartographiques et fichiers GPX téléchargeables ([article](http://www.openstreetmap.org/user/joost%20schouppe/diary/39250)) * L'inverse: validation de "Wegenregister" à partir d'OSM à Anvers ([article](http://www.openstreetmap.org/user/joost%20schouppe/diary/39573)) diff --git a/content/projects/road-completion.nl.md b/content/projects/road-completion.nl.md index add4d0a..922682c 100644 --- a/content/projects/road-completion.nl.md +++ b/content/projects/road-completion.nl.md @@ -9,7 +9,7 @@ aliases: ["/2017/01/06/nl-project-road-completion.html"] Hoewel we OpenStreetMap heten, zijn niet echt álle straten gemapped in OSM. Natuurlijk hebben we een excellent routeerbaar wegnetwerk, maar toch zijn er hier en daar nog kleine fouten. De bedoeling van dit project is om die fouten te detecteren en ontbrekende wegen toe te voegen. Tegelijk willen we er ook voor zorgen dat we nooit achterlopen op de overheidsdata, en dat we fouten aan overheidskant kunnen laten nakijken door hen. -### Crowdsourcing, open data en machine learning +## Crowdsourcing, open data en machine learning Aangezien OSM volledig gebaseerd is op crowdsourcing, zal onze crowd elk opgemerkt foutje corrigeren. Sommige wijzigingen op het terrein vallen echter niet echt op. Een nieuwe verkaveling met maar een paar huizen in een doodlopende straat bijvoorbeeld. Een wijziging van een straatnaam of een spelfout in die naam. Een weg die slecht ingetekend is in OSM omdat de luchtfoto's vroeger van mindere kwaliteit waren. @@ -20,13 +20,13 @@ We bouwen tools om verbeteringen in de officiële wegendata aan te bieden aan on ![]({{ site.baseurl }}/assets/images/post/road-completion1.jpg) *De evolutie van het mappen van trage wegen in Brussel. Groen: trage wegen. Grijs: reeds getekende wegen. Zwart: wegen die deze maand verbeterd of toegevoegd werden.* -### Betrouwbare data +## Betrouwbare data OpenStreetMap groeit op een chaotische manier. Op bepaalde plaatsen is de kwaliteit van de data verbluffend. Op andere plaatsen is de kaart nog rudimentair. Wie de OSM data gebruikt, krijgt doorgaans geen kwaliteitsgarantie. We willen het vertrouwen in de data verhogen met de eenvoudige garantie dat OSM minstens even volledig is als de overheidsdata. Met de tool die we bouwden, kan je op elk moment het aantal wegsegmenten zien dat de overheid kent, maar OSM nog niet. Met deze objectieve meting van volledigheid willen we de OSM data voor nog meer usecases geschikt maken. Je kan [het aantal ontbrekende wegen hier opvolgen](https://osmbe.github.io/road-completion/). -### Huidige stand van zaken +## Huidige stand van zaken - Het vergelijkingsproces loopt elke week voor [Vlaanderen](https://github.com/osmbe/road-completion/tree/master/data/belgium/flanders/difference) en [Brussel](https://github.com/osmbe/road-completion/tree/master/data/belgium/brussels/difference) - Het vergelijkingsproces loopt manueel voor [Wallonië](https://github.com/osmbe/road-completion/tree/master/data/belgium/wallonia/difference) @@ -34,7 +34,7 @@ Je kan [het aantal ontbrekende wegen hier opvolgen](https://osmbe.github.io/road - Je kan [het aantal ontbrekende wegen hier opvolgen](https://osmbe.github.io/road-completion/). - Digitaal Vlaanderen heeft onze feedback voor Vlaanderen verwerkt. Onze mappers vonden 561 gevallen waarin de officiële data wellicht fout waren. Dit leidde in 90% van de gevallen tot een correctie van de officiële data. -### Sleutelmomenten van dit project +## Sleutelmomenten van dit project - Exploratie van het Wegenregister als bron, met afgeleide kaartlagen om mappers te helpen. Zie dit ([artikel - EN](http://www.openstreetmap.org/user/joost%20schouppe/diary/39250)) - In omgekeerde richting: Wegenregister valideren met OSM, case study in Antwerpen ([artikel - EN](http://www.openstreetmap.org/user/joost%20schouppe/diary/39573)) diff --git a/content/projects/streetlevelimagery.en.md b/content/projects/streetlevelimagery.en.md index 8b3bd23..10c3736 100644 --- a/content/projects/streetlevelimagery.en.md +++ b/content/projects/streetlevelimagery.en.md @@ -27,9 +27,9 @@ Our members have been contributing millions of openly licensed street level imag The images aren't just useful to local mappers. As we publish them on the [Mapillary](https://www.mapillary.com) platform, they can be used by anyone in the business of producing open data. More than that, the platform automatically generates derived data about traffic signs and infrastructure, which is in turn available as open data. As we retain full ownership of the images, we can also share them under other licenses and on other platforms. -{{< figure src="images/posts/mapillary-members.png" link="https://www.mapillary.com/app/org/mosmbelgium?lat=50.70729971977286&lng=5.096829552404529&z=6.707504774632062" caption="OSMbe members" >}}{{< mdl-disable "" >}} +{{< figure src="images/posts/mapillary-members.png" link="https://www.mapillary.com/app/org/mosmbelgium?lat=50.70729971977286&lng=5.096829552404529&z=6.707504774632062" caption="OSMbe members" >}} -{{< figure src="images/posts/mapillary-official.png" link="https://www.mapillary.com/app/org/osmbelgium?lat=50.70729971977286&lng=5.096829552404529&z=6.707504774632062" caption="OSMbe official" >}}{{< mdl-disable "" >}} +{{< figure src="images/posts/mapillary-official.png" link="https://www.mapillary.com/app/org/osmbelgium?lat=50.70729971977286&lng=5.096829552404529&z=6.707504774632062" caption="OSMbe official" >}} ## Crowdsourcing for the win diff --git a/content/projects/streetlevelimagery.fr.md b/content/projects/streetlevelimagery.fr.md index 58869ba..4569150 100644 --- a/content/projects/streetlevelimagery.fr.md +++ b/content/projects/streetlevelimagery.fr.md @@ -27,9 +27,9 @@ Les contributions de nos membres comprennent déjà des millions d'images ouvert Ces images sont utiles pour les cartographes locaux mais, de plus, après avoir été publiées sur la plateforme Mapillary, elles sont accessibles et peuvent être utilisées par toute autre personne désireuse de générer d'autres données ouvertes. Cette plateforme produit automatiquement des données dérivées sur les panneaux de signalisation et les infrastructures, données qui sont elles aussi disponibles en données ouvertes. Comme nous gardons le droit de propriété sur toutes ces images, nous pouvons toujours les partager sous d'autres licenses et sur d'autres plateformes. -{{< figure src="images/posts/mapillary-members.png" link="https://www.mapillary.com/app/org/mosmbelgium?lat=50.70729971977286&lng=5.096829552404529&z=6.707504774632062" caption="OSMbe members" >}}{{< mdl-disable "" >}} +{{< figure src="images/posts/mapillary-members.png" link="https://www.mapillary.com/app/org/mosmbelgium?lat=50.70729971977286&lng=5.096829552404529&z=6.707504774632062" caption="OSMbe members" >}} -{{< figure src="images/posts/mapillary-official.png" link="https://www.mapillary.com/app/org/osmbelgium?lat=50.70729971977286&lng=5.096829552404529&z=6.707504774632062" caption="OSMbe official" >}}{{< mdl-disable "" >}} +{{< figure src="images/posts/mapillary-official.png" link="https://www.mapillary.com/app/org/osmbelgium?lat=50.70729971977286&lng=5.096829552404529&z=6.707504774632062" caption="OSMbe official" >}} ## La production participative, un pari gagnant diff --git a/content/projects/streetlevelimagery.nl.md b/content/projects/streetlevelimagery.nl.md index e449b03..3c671d9 100644 --- a/content/projects/streetlevelimagery.nl.md +++ b/content/projects/streetlevelimagery.nl.md @@ -27,9 +27,9 @@ Onze leden hebben in België al miljoenen straatbeelden bijgedragen onder open l Niet alleen lokale mappers profiteren van de beelden. Omdat we ze publiceren op het Mapillary platform, kunnen ze door iedereen gebruikt worden om open data te genereren. En meer dan dat: het platform genereert automatisch afgeleide gegevens over verkeersborden en infrastructuur, informatie die vervolgens weer beschikbaar is als open data. Omdat we volledig eigenaar blijven van de beelden, kunnen we ze ook delen onder andere licenties en op andere platforms. -{{< figure src="images/posts/mapillary-members.png" link="https://www.mapillary.com/app/org/mosmbelgium?lat=50.70729971977286&lng=5.096829552404529&z=6.707504774632062" caption="OSMbe members" >}}{{< mdl-disable "" >}} +{{< figure src="images/posts/mapillary-members.png" link="https://www.mapillary.com/app/org/mosmbelgium?lat=50.70729971977286&lng=5.096829552404529&z=6.707504774632062" caption="OSMbe members" >}} -{{< figure src="images/posts/mapillary-official.png" link="https://www.mapillary.com/app/org/osmbelgium?lat=50.70729971977286&lng=5.096829552404529&z=6.707504774632062" caption="OSMbe official" >}}{{< mdl-disable "" >}} +{{< figure src="images/posts/mapillary-official.png" link="https://www.mapillary.com/app/org/osmbelgium?lat=50.70729971977286&lng=5.096829552404529&z=6.707504774632062" caption="OSMbe official" >}} ## Het nut van Crowdsourcing diff --git a/content/projects/traffic-sign.en.md b/content/projects/traffic-sign.en.md index b60c262..127bbc2 100644 --- a/content/projects/traffic-sign.en.md +++ b/content/projects/traffic-sign.en.md @@ -14,9 +14,9 @@ We're not quite there just yet, but the edits in the database that do happen are So we're building on a tool in good [Road Completion]({{< ref "projects/road-completion.md" >}}) tradition to make sure that if the government provides the data, we can guarantee that we'll be up to date. This in turn might be a little incentive for more municipalities to keep their bit of the database online. Just like in Road Completion, we "accidentally review" the government data as well. When we map traffic signs, we spot errors. Often user error, sometimes logical errors. These can then help municipalities to improve their data quality or even local reality. OSM data users will be able to see how well we keep track of new traffic signs - they won't have to trust us on our word that the data is good. -{{< figure src="https://i.imgur.com/V9zjUuD.png" title="Traffic signs in Flanders: highlighted are from 2019 and more recent" >}}{{< mdl-disable "" >}} +{{< figure src="https://i.imgur.com/V9zjUuD.png" title="Traffic signs in Flanders: highlighted are from 2019 and more recent" >}} -### In practice +## In practice [We have a MapRoulette task online](https://maproulette.org/browse/challenges/23550) that is updated periodically. This task simply offers the most recent traffic signs as microtasks: the challenge is to map their effects. @@ -31,14 +31,14 @@ How do we do that: The [code is available on Github](https://github.com/osmbe/traffic-sign-project). You can post issues there. A first proof of concept was built by Joost Schouppe. Ivan Diaz from TomTom rebuilt the entire workflow in Python and prepared a weekflow to ultimately run weekly updates completely automatically. -### What's next +## What's next - Activate automatic weekly updates with Github Actions. - It might be possible to compare two dumps to find traffic signs that have been improved - With our StreetLevel Imagery project, we create images that are uploaded to Mapillary. That platform automatically derives traffic signs. These signs are in turn detected by Osmose. This tool creates microtasks that are filtered for already mapped traffic signs. For example, it will only create a task for a max 30 sign if there is no road in OSM nearby where you can drive 30. The amount of tasks is still daunting. We intend to synchronize these tasks to MapRoulette, to "gamify" the mapping process in hopes of motivating more mappers to contribute. - Find other source datasets to use this logic on. It is most interesting when there is an open, continously updated traffic sign database available. We did a first exploration in the Netherlands already, and it looks promising. If you know similar datasets, you're invited to create a pull request or post an Issue. -### Project key events +## Project key events - 9/2021: [first exploration of the dataset for mapping use](https://lists.openstreetmap.org/pipermail/talk-be/2021-September/011322.html). - 11/2021: [first filtering of traffic signs](https://lists.openstreetmap.org/pipermail/talk-be/2021-November/011374.html) published on MapRoulette diff --git a/content/projects/traffic-sign.nl.md b/content/projects/traffic-sign.nl.md index 8c2760f..230383c 100644 --- a/content/projects/traffic-sign.nl.md +++ b/content/projects/traffic-sign.nl.md @@ -15,9 +15,9 @@ We zijn er nog niet helemaal, maar de bewerkingen in de database die plaatsvinde Dus we bouwen voort op een tool in de traditie van [Road Completion](https://openstreetmap.be/en/projects/road-completion.html) om ervoor te zorgen dat als de overheid de gegevens levert, wij kunnen garanderen dat we up-to-date zijn. Gebruikers van OSM-gegevens zullen kunnen zien hoe goed we nieuwe verkeersborden bijhouden - ze hoeven ons niet op ons woord te vertrouwen dat de gegevens goed zijn. Dit soort project kan op zijn beurt een kleine stimulans zijn voor meer gemeenten om hun deel van de database online te houden. Net als bij Road Completion controleren we daarbij "per ongeluk" ook de data van de overheid. Als we verkeersborden in kaart brengen, zien we fouten. Vaak gebruikersfouten, soms logische fouten. Als we dat melden, kunnen we gemeenten helpen om de kwaliteit van hun gegevens of zelfs de lokale realiteit te verbeteren. -{{< figure src="https://i.imgur.com/V9zjUuD.png" title="Verkeersborden in Vlaanderen, met uitlichting van borden vanaf 2019" >}}{{< mdl-disable "" >}} +{{< figure src="https://i.imgur.com/V9zjUuD.png" title="Verkeersborden in Vlaanderen, met uitlichting van borden vanaf 2019" >}} -### In de praktijk +## In de praktijk [We hebben een MapRoulette-taak online](https://maproulette.org/browse/challenges/23550) die periodiek wordt bijgewerkt. Deze taak biedt gewoon de meest recente verkeersborden als microtaken: de uitdaging is om hun effecten in kaart te brengen. @@ -32,14 +32,14 @@ Hoe doen we dat? De [code is beschikbaar op Github](https://github.com/osmbe/traffic-sign-project). U kunt daar problemen plaatsen. Een eerste proof of concept is gebouwd door Joost Schouppe. Ivan Diaz van TomTom herbouwde de hele workflow in Python en bereidde een workflow voor om de updates uiteindelijk volledig automatisch uit te voeren. -### Wat is de volgende stap? +## Wat is de volgende stap? - Automatische wekelijkse updates activeren met Github Actions. - Het is misschien mogelijk om twee dumps te vergelijken om verkeersborden te vinden die zijn verbeterd - Met ons StreetLevel Imagery project maken we beelden die worden geüpload naar Mapillary. Dat platform leidt automatisch verkeersborden af. Deze verkeersborden worden op hun beurt gedetecteerd door Osmose. Deze tool maakt microtaken aan die gefilterd worden op reeds in kaart gebrachte verkeersborden. Het zal bijvoorbeeld alleen een taak voor een max 30 bord aanmaken als er geen weg in OSM in de buurt is waar je 30 mag rijden. Het aantal taken is nog steeds ontmoedigend. We zijn van plan om deze taken te synchroniseren met MapRoulette, om het karteringsproces te “gamificeren” in de hoop meer mappers te motiveren om bij te dragen. - Andere brondatasets vinden om deze logica op te gebruiken. Het is het meest interessant als er een open, continu bijgewerkte database met verkeersborden beschikbaar is. We hebben al een eerste verkenning gedaan in Nederland, en het ziet er veelbelovend uit. Als je vergelijkbare datasets kent, word je uitgenodigd om een pull request aan te maken of een Issue te plaatsen. -### Belangrijkste gebeurtenissen +## Belangrijkste gebeurtenissen - 9/2021: [eerste verkenning van de dataset voor kaartgebruik](https://lists.openstreetmap.org/pipermail/talk-be/2021-September/011322.html). - 11/2021: [eerste filtering van verkeersborden](https://lists.openstreetmap.org/pipermail/talk-be/2021-November/011374.html) gepubliceerd op MapRoulette. diff --git a/layouts/shortcodes/mdl-disable.html b/layouts/shortcodes/mdl-disable.html deleted file mode 100644 index c12e57e..0000000 --- a/layouts/shortcodes/mdl-disable.html +++ /dev/null @@ -1 +0,0 @@ -{{- /* Ignore the shortcode */ -}}