WLAN Pi
WLANpi NEO3? #20
-
|
https://www.friendlyelec.com/index.php?route=product/product&product_id=279 << Any idea whether this hardware will work with the 2.x wlanpi image? thanks! Devin |
Beta Was this translation helpful? Give feedback.
Replies: 3 comments 3 replies
-
|
It won’t work with the 2.x image, Devin. We built an experimental image for NEO3, and it worked in principle, but it is now outdated, untested and not supported. |
Beta Was this translation helpful? Give feedback.
-
|
Also, Armbian distribution stopped supporting NEO3: WLAN Pi Community Edition running 3.x might be the right for you - Raspberry Pi 4, or MCU board with CM4. |
Beta Was this translation helpful? Give feedback.
-
|
I really appreciate the help Jiri! Thanks for the fast and detailed answers! |
Beta Was this translation helpful? Give feedback.
-
|
Is there any other alternative for Neo2? Would the code work on Neo 1.4 kit? I will be buying a WLAN pi pro when it is available. However, at the moment I need a sensor to play with. Thanks in advance. |
Beta Was this translation helpful? Give feedback.
-
|
Raspberry Pi 4 running the latest 3.x release would be what I would recommend. It runs the latest code that we also use on the Pro, and hopefully you might be able to purchase an RPi4 locally. I appreciate the supply chain situation. To boot 2.x image on NEO1, you would need an Armbian image compatible with the NEO1 and that's not available and it would take quite some effort to build it, test it and make it available to you. If you are after a generic Armbian OS image, which you could then manually customise, you can download it from Armbian, but obviously that would be missing the WLAN Pi features. |
Beta Was this translation helpful? Give feedback.
-
|
Thanks Jiri. Much appreciated. |
Beta Was this translation helpful? Give feedback.
It won’t work with the 2.x image, Devin. We built an experimental image for NEO3, and it worked in principle, but it is now outdated, untested and not supported.