Earthing the AMS Switches

[Firefishy]

It is recommended earth the Juniper EX4300 switches.

I have sent the earthing lugs, screws, washer and cabling. 1 cable + screw per switch.

There is a rack ground point I believe on the bottom left of the rack (looking from rear). The switches should wired into this using the provided cables.

[pnorman]

Do we have any screwdrivers required on site?

[Firefishy]

I included a short tiny screwdriver in the parcel which can be used to screw in the earthing screw into the side of the switch. It isn't really suitable for anything else.

I cannot remember if we left a screwdriver in the shelf box.

[pnorman]

Earthed to the top of the cage. The cables should really be about 20cm longer or more, I couldn't route as I wanted.