paper.tex

%% forked from the following reference document provided by IEEE>
%%
%% bare_jrnl.tex
%% V1.4b
%% 2015/08/26
%% by Michael Shell
%% see http://www.michaelshell.org/
%% for current contact information.
%% Support sites:
%% http://www.michaelshell.org/tex/ieeetran/
%% http://www.ctan.org/pkg/ieeetran
%% and
%% http://www.ieee.org/

\documentclass[journal]{IEEEtran}

% If IEEEtran.cls has not been installed into the LaTeX system files,
% manually specify the path to it like:
% \documentclass[journal]{../sty/IEEEtran}
%\usepackage[showframe]{geometry}
%LPR: This chunk corrects a nasty bug in the IEEEtran biblography section.
\makeatletter
\def\endthebibliography{%
	\def\@noitemerr{\@latex@warning{Empty `thebibliography' environment}}%
	\endlist
}
\makeatother

%LPR: Insert the core extra packages.
%LPR: Uncomment parts of that file based upon your needs.
\input{sections/000-extrapackages-ieee}
%LPR: Extra packages YOU want to inclue go in this guy
\input{sections/000-extrapackages-local}
% For the helper macros used to control markup while editing.
\input{sections/000-draft_files}

\begin{document}
% paper title
% Titles are generally capitalized except for words such as a, an, and, as,
% at, but, by, for, in, nor, of, on, or, the, to and up, which are usually
% not capitalized unless they are the first or last word of the title.
% Linebreaks \\ can be used within to get better formatting as desired.
% Do not put math or special symbols in the title.
\title{A Pretty Great Thing: \\Or, Why You Should Hire Me}

% author names and IEEE memberships
% note positions of commas and nonbreaking spaces ( ~ ) LaTeX will not break
% a structure at a ~ so this keeps an author's name from being broken across
% two lines.
% use \thanks{} to gain access to the first footnote area
% a separate \thanks must be used for each paragraph as LaTeX2e's \thanks
% was not built to handle multiple paragraphs
%\author{Michael~Shell,~\IEEEmembership{Member,~IEEE,}
%        John~Doe,~\IEEEmembership{Fellow,~OSA,}
%        and~Jane~Doe,~\IEEEmembership{Life~Fellow,~IEEE}% <-this % stops a space
\ifLPRfmtNOAUTH
\author{}% None of that if we're hiding authorship information.
\else
\author{Luke~Renaud,~\IEEEmembership{Student~Member,~IEEE,}
		Your~Labmate,~%\IEEEmembership{Student~Member,~IEEE,}
%		Your~Other~Labmate,~%\IEEEmembership{Student~Member,~IEEE,}
		Your~Professor,~\IEEEmembership{Senior~Member,~IEEE,}% <-this % stops a space
%\thanks{M. Shell was with the Department
%of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta,
%GA, 30332 USA e-mail: (see http://www.michaelshell.org/contact.html).}% <-this % stops a space
%\thanks{L. Renaud, Y. Labmate, and Y. Professor are with the School of Electrical Engineering and Computer Science, My University, City, ST, ZIPCODE USA (e-mail: l_renaud@univ.edu; y_labmate@univ.edu; y_professor@univ.edu).}% <-this % stops a space
%\thanks{Manuscript received April 19, 2005; revised August 26, 2015.}%
}
\fi

% note the % following the last \IEEEmembership and also \thanks - 
% these prevent an unwanted space from occurring between the last author name
% and the end of the author line. i.e., if you had this:
% 
% \author{....lastname \thanks{...} \thanks{...} }
%                     ^------------^------------^----Do not want these spaces!
%
% a space would be appended to the last name and could cause every name on that
% line to be shifted left slightly. This is one of those "LaTeX things". For
% instance, "\textbf{A} \textbf{B}" will typeset as "A B" not "AB". To get
% "AB" then you have to do: "\textbf{A}\textbf{B}"
% \thanks is no different in this regard, so shield the last } of each \thanks
% that ends a line with a % and do not let a space in before the next \thanks.
% Spaces after \IEEEmembership other than the last one are OK (and needed) as
% you are supposed to have spaces between the names. For what it is worth,
% this is a minor point as most people would not even notice if the said evil
% space somehow managed to creep in.


% The paper headers
%\markboth{IEEE Transactions on Circuits and Systems---II: Express Briefs,~Vol.~\#\#, No.~\#, Month~\#\#\#\#}%
\markboth{IEEE Transactions on Templates---I: Regular Papers,~Vol.~\#\#, No.~\#, Month~\#\#\#\#}{Renaud \MakeLowercase{\textit{et al.}}: \<~PAPER TITLE GOES HERE\>}
% The only time the second header will appear is for the odd numbered pages
% after the title page when using the twoside option.
% 
% *** Note that you probably will NOT want to include the author's ***
% *** name in the headers of peer review papers.                   ***
% You can use \ifCLASSOPTIONpeerreview for conditional compilation here if
% you desire.

% If you want to put a publisher's ID mark on the page you can do it like
% this:
%\IEEEpubid{0000--0000/00\$00.00~\copyright~2015 IEEE}
% Remember, if you use this you must call \IEEEpubidadjcol in the second
% column for its text to clear the IEEEpubid mark.

% make the title area
\maketitle

% As a general rule, do not put math, special symbols or citations
% in the abstract or keywords.
\input{sections/001-head_material}
% For peer review papers, you can put extra information on the cover
% page as needed:
% \ifCLASSOPTIONpeerreview
% \begin{center} \bfseries EDICS Category: 3-BBND \end{center}
% \fi
%
% For peerreview papers, this IEEEtran command inserts a page break and
% creates the second title. It will be ignored for other modes.
\IEEEpeerreviewmaketitle

\input{sections/010-intro.tex}
\input{sections/020-theory.tex}
\input{sections/030-example.tex}
\input{sections/090-conclusion.tex}
%\appendices
%\input{sections/110-apdx1.tex}
%\input{sections/120-apdx2.tex}

% An example of a floating figure using the graphicx package.
% Note that \label must occur AFTER (or within) \caption.
% For figures, \caption should occur after the \includegraphics.
% Note that IEEEtran v1.7 and later has special internal code that
% is designed to preserve the operation of \label w\marginparwidthithin \caption
% even when the captionsoff option is in effect. However, because
% of issues like this, it may be the safest practice to put all your
% \label just after \caption rather than within \caption{}.
%
% Reminder: the "draftcls" or "draftclsnofoot", not "draft", class
% option should be used if it is desired that the figures are to be
% displayed while in draft mode.
%
%\begin{figure}[!t]
%\centering
%\includegraphics[width=2.5in]{myfigure}
% where an .eps filename suffix will be assumed under latex, 
% and a .pdf suffix will be assumed for pdflatex; or what has been declared
% via \DeclareGraphicsExtensions.
%\caption{Simulation results for the network.}
%\label{fig_sim}
%\end{figure}

% Note that the IEEE typically puts floats only at the top, even when this
% results in a large percentage of a column being occupied by floats.

% An example of a double column floating figure using two subfigures.
% (The subfig.sty package must be loaded for this to work.)
% The subfigure \label commands are set within each subfloat command,
% and the \label for the overall figure must come after \caption.
% \hfil is used as a separator to get equal spacing.
% Watch out that the combined width of all the subfigures on a 
% line do not exceed the text width or a line break will occur.
%
%\begin{figure*}[!t]
%\centering
%\subfloat[Case I]{\includegraphics[width=2.5in]{box}%
%\label{fig_first_case}}
%\hfil
%\subfloat[Case II]{\includegraphics[width=2.5in]{box}%
%\label{fig_second_case}}
%\caption{Simulation results for the network.}
%\label{fig_sim}
%\end{figure*}
%
% Note that often IEEE papers with subfigures do not employ subfigure
% captions (using the optional argument to \subfloat[]), but instead will
% reference/describe all of them (a), (b), etc., within the main caption.
% Be aware that for subfig.sty to generate the (a), (b), etc., subfigure
% labels, the optional argument to \subfloat must be present. If a
% subcaption is not desired, just leave its contents blank,
% e.g., \subfloat[].

% An example of a floating table. Note that, for IEEE style tables, the
% \caption command should come BEFORE the table and, given that table
% captions serve much like titles, are usually capitalized except for words
% such as a, an, and, as, at, but, by, for, in, nor, of, on, or, the, to
% and up, which are usually not capitalized unless they are the first or
% last word of the caption. Table text will default to \footnotesize as
% the IEEE normally uses this smaller font for tables.
% The \label must come after \caption as always.
%
%\begin{table}[!t]
%% increase table row spacing, adjust to taste
%\renewcommand{\arraystretch}{1.3}
% if using array.sty, it might be a good idea to tweak the value of
% \extrarowheight as needed to properly center the text within the cells
%\caption{An Example of a Table}
%\label{table_example}
%\centering
%% Some packages, such as MDW tools, offer better commands for making tables
%% than the plain LaTeX2e tabular which is used here.
%\begin{tabular}{|c||c|}
%\hline
%One & Two\\
%\hline
%Three & Four\\
%\hline
%\end{tabular}
%\end{table}

% Note that the IEEE does not put floats in the very first column
% - or typically anywhere on the first page for that matter. Also,
% in-text middle ("here") positioning is typically not used, but it
% is allowed and encouraged for Computer Society conferences (but
% not Computer Society journals). Most IEEE journals/conferences use
% top floats exclusively. 
% Note that, LaTeX2e, unlike IEEE journals/conferences, places
% footnotes above bottom floats. This can be corrected via the
% \fnbelowfloat command of the stfloats package.

% use section* for acknowledgment
\if{false}
\section*{Acknowledgment}
The authors would like to thank...
\fi

% Can use something like this to put references on a page
% by themselves when using endfloat and the captionsoff option.
\ifCLASSOPTIONcaptionsoff
  \newpage
\fi

% trigger a \newpage just before the given reference
% number - used to balance the columns on the last page
% adjust value as needed - may need to be readjusted if
% the document is modified later
%\IEEEtriggeratref{8}
% The "triggered" command can be changed if desired:
%\IEEEtriggercmd{\enlargethispage{-5in}}

% references section
% The IEEEtran BibTeX style support page is at:
% http://www.michaelshell.org/tex/ieeetran/bibtex/
\bibliographystyle{IEEEtran}
% **** IEEE Bibliography STUFF ****
\bibliography{IEEEabrv,references}
%LPR: i.e. references.bib in this folder is your references database.
%LPR: I use JabRef to manage my references.

% Only show authors if fmtNOAUTH is false
\ifLPRfmtNOAUTH\else
	\input{sections/095-authors.tex}
\fi

% Add the random todo items to the end of the document if we want them.
\ifLPRfmtDRAFT
	\input{sections/099-todostuff.tex}
\fi

% that's all folks
\end{document}