TestGrid Configuration

Prow Job Configuration

If you just have a Prow job configuration you want to appear in an existing dashboard, add annotations to that Prow job.

If it's a Prow job in the k8s.io instance, you don't need to do anything else.

If it's a Prow job in another instance of Prow, use transfigure.

Add this to your Prow job:

annotations:
  testgrid-dashboards: dashboard-name      # a dashboard already defined in a config.yaml.
  testgrid-tab-name: some-short-name       # optionally, a shorter name for the tab. If omitted, just uses the job name.
  testgrid-alert-email: me@me.com          # optionally, an alert email that will be applied to the tab created in the
                                           # first dashboard specified in testgrid-dashboards.
  description: Words about your job.       # optionally, a description of your job. If omitted, just uses the job name.

  testgrid-num-columns-recent: "10"        # optionally, the number of runs a row can be omitted from before it is
                                           # considered stale. Currently defaults to 10.
  testgrid-num-failures-to-alert: "3"      # optionally, the number of continuous failures before sending an email.
                                           # Currently defaults to 3.
  testgrid-alert-stale-results-hours: "12" # optionally, send an email if this many hours pass with no results at all.

This functionality is provided by Configurator. If you have Prow jobs in a different instance of Prow, you may want to use Transfigure instead.

If you need to create a new dashboard, or do anything more advanced, read on.

Configuration

Open or create a Testgrid config file (example) in your favorite editor and:

Configure the test groups
Add those testgroups to one or more tabs in one or more dashboards
Consider using dashboard groups if multiple dashboards are needed.

Test groups

Test groups contain a set of test results across time for the same job. Each group backs one or more dashboard tabs.

Add a new test group under test_groups:, specifying the group's name, and where the logs are located.

Ex:

test_groups:
- name: {test_group_name}
  gcs_prefix: kubernetes-jenkins/logs/{test_group_name}

See the TestGroup message in config.proto for additional fields to configure like days_of_results, tests_name_policy, notifications, etc.

Dashboard Tabs

A dashboard tab is a particular view of a test group. Multiple dashboard tabs can view the same test group in different ways, via different configuration options. All dashboard tabs belong under a dashboard (see below).

Dashboards

A dashboard is a set of related dashboard tabs. The dashboard name shows up as the top-level link when viewing TestGrid.

Add a new dashboard under dashboards and a new dashboard tab under that.

Ex:

dashboards:
- name: {dashboard-name}
  dashboard_tab:
  - name: {dashboard-tab-name}
    test_group_name: {test-group-name}

See the Dashboard and DashboardTab messages in config.proto for additional configuration options, such as notifications, file_bug_template, description, code_search_url_template, etc.

Dashboard groups

A dashboard group is a set of related dashboards. When viewing a dashboard's tabs, you'll see the other dashboards in the Dashboard Group at the top of the client.

Add a new dashboard group, specifying names for all the dashboards that fall under this group.

Ex:

dashboard_groups:
- name: {dashboard-group-name}
  dashboard_names:
  - {dashboard-1}
  - {dashboard-2}
  - {dashboard-3}

Testing your configuration

Run bazel test //config/tests/testgrids/.. to ensure the configuration is valid.

Advanced configuration

See config.proto for an extensive list of configuration options. Here are some commonly-used ones.

More/Fewer Results

Specify days_of_results in a test group to increase or decrease the number of days of results shown.

test_groups:
- name: kubernetes-build
  gcs_prefix: kubernetes-jenkins/logs/ci-kubernetes-build
  days_of_results: 7

Tab descriptions

Add a short description to a dashboard tab describing its purpose.

  dashboard_tab:
  - name: gce
    test_group_name: ci-kubernetes-e2e-gce
    base_options: 'include-filter-by-regex=Kubectl%7Ckubectl'
    description: 'kubectl gce e2e tests for master branch'

Link/Bug/Regression-Search Templates

(DashboardTab) open_test_template (DashboardTab) open_bug_template (DashboardTab) file_bug_template (DashboardTab) results_url_template (DashboardTab) code_search_url_template

Need to change what links TestGrid opens for tests, bugs, or regression search? Customize them with templates!

open_test_template: The test result link when clicking on a cell (e.g. Spyglass)
open_bug_template: The bug link when clicking on associated bugs (e.g. GitHub)
file_bug_template: The default info when filing an issue through the client (e.g. GitHub)
attach_bug_template: The default info when attaching a target to an existing bug (e.g. GitHub)
results_url_template: The link to all test runs (e.g. Deck)
code_search_url_template: The link when searching a code base for a regression (e.g. GitHub)

You can add fields to link templates to substitute them for an existing value!

To URL encode something (see JavaScript's encodeURIComponent()) in a template, like a field, specify <encode: [what-to-encode]>.

e.g. url = "http://test/<encode:<test-name>>"

Fields for open_test_template, open_bug_template, file_bug_template, results_url_template:

<environment>: The tab name.
<test-status>: String description of the cell's test status (e.g. 'Failed').
<test-id>: Run ID for a cell.
<test-name>: The test name.
<display-name>: The name of the test, as displayed in TestGrid.
<gcs_prefix>: gcs_prefix (as defined in your test_group's config).
<custom-N>: The value of the Nth custom column header (as defined in your test_group's config).
<results-explorer>: The current URL (e.g. https://testgrid.k8s.io/some-dash#some-tab).
<test-url>: The resulting URL from applying open_test_template on this cell.
<cs-path>: code_search_path (as defined in your test_group's config).

Fields for code_search_url_template (compared between two columns in TestGrid):

<start-cl>: The earlier CL/build ID in the comparison
<end-cl>: The later CL/build ID
<start-custom-N>: The earlier custom column header value (see <custom-N> above)
<end-custom-N>: The later custom column header value

Column headers

TestGrid shows date, build number, and k8s and test-infra commit shas above each run's results by default. To add your own custom column headers, add a key-value pair in your tests' metadata (see metadata for finished.json), and add the key for that pair as a configuration_value under column_header for your test group. Example:

test_groups:
- name: ci-kubernetes-e2e-gce-ubuntudev-k8sdev-default
  gcs_prefix:
  kubernetes-jenkins/logs/ci-kubernetes-e2e-gce-ubuntudev-k8sdev-default
  column_header:
  - configuration_value: node_os_image
  - configuration_value: master_os_image
  - configuration_value: Commit
  - configuration_value: infra-commit

Email alerts

In TestGroup, set num_failures_to_alert (alerts for consistent failures) and/or alert_stale_results_hours (alerts when tests haven't run recently). You can also set num_passes_to_disable_alert.

In DashboardTab, set alert_mail_to_addresses (comma-separated list of email addresses to send mail to).

Additional options for DashboardTab alerts:

num_passes_to_disable_alert: the number of consecutive test passes to close the alert
subject: custom subject for alert mails
debug_url: custom link for further context/instructions on debugging this alert
debug_message: custom text to show for the debug link; debug_url is required for debug_message to appear

These alerts will send whenever new failures are detected (or whenever the dashboard tab goes stale), and will stop when num_passes_to_disable_alert consecutive passes are found (or no failure is found in num_columns_recent runs).

# Send alerts to foo@bar.com whenever a test fails 3 times in a row, or tests
# haven't run in the last day.
test_groups:
- name: ci-kubernetes-e2e-gce
  gcs_prefix: kubernetes-jenkins/logs/ci-kubernetes-e2e-gce
  alert_stale_results_hours: 24
  num_failures_to_alert: 3

dashboards:
- name: google-gce
  dashboard_tab:
  - name: gce
    test_group_name: ci-kubernetes-e2e-gce
    alert_options:
      alert_mail_to_addresses: 'foo@bar.com'

Base options

Default to a set of client modifiers when viewing this dashboard tab.

# Show test cases from ci-kubernetes-e2e-gce, but only if the test has 'Kubectl' or 'kubectl' in the name.
  dashboard_tab:
  - name: gce
    test_group_name: ci-kubernetes-e2e-gce
    base_options: 'include-filter-by-regex=Kubectl%7Ckubectl'
    description: 'kubectl gce e2e tests for master branch'

More informative test names

If you run multiple versions of a test against different parameters, show which parameters they with after the test name.

# Show a test case as "{test_case_name} [{Context}]"
- name: ci-kubernetes-node-kubelet-benchmark
  gcs_prefix: kubernetes-jenkins/logs/ci-kubernetes-node-kubelet-benchmark
  test_name_config:
    name_elements:
    - target_config: Tests name
    - target_config: Context
    name_format: '%s [%s]'

Customize regression search

Narrow down where to search when searching for a regression between two builds/commits.

  dashboard_tab:
  - name: bazel
    description: Runs bazel test //... on the test-infra repo.
    test_group_name: ci-test-infra-bazel
    code_search_url_template:
      url: https://github.com/kubernetes/test-infra/compare/<start-custom-0>...<end-custom-0>

Notifications

Testgrid supports the ability to add notifications, which appears as a yellow butter bar / toast message at the top of the screen.

This is an effective way to broadcast system wide information (all FOO suites are failing due to blah, upgrade frobber to vX before the weekend, etc.)

Configure the list of notifications: under dashboard or testgroup: Each notification includes a summary: that defines the text displayed. Notifications benefit from including a context_link: url that can be clicked to provide more information.

Ex:

dashboards:
- name: k8s
  dashboard_tab:
  - name: build
    test_group_name: kubernetes-build
  notifications:  # Attach to a specific dashboard
  - summary: Hello world (first notification).
  - summary: Tests are failing to start (second notification).
    context_link: https://github.com/kubernetes/kubernetes/issues/123

or

test_groups:  # Attach to a specific test_group
- name: kubernetes-build
  gcs_prefix: kubernetes-jenkins/logs/ci-kubernetes-build
  notifications:
  - summary: Hello world (first notification)
  - summary: Tests are failing to start (second notification).
    context_link: https://github.com/kubernetes/kubernetes/issues/123

What Counts as 'Recent'

Configure num_columns_recent to change how many columns TestGrid should consider 'recent' for results. TestGrid uses this to calculate things like 'is this test stale?' (and hides the test).

test_groups:
- name: kubernetes-build
  gcs_prefix: kubernetes-jenkins/logs/ci-kubernetes-build
  num_columns_recent: 3

Long-Running Tests

If your tests run for a very long time (more than 24 hours), set max_test_runtime_hours.

# This test group has tests that run for 48 hours; set a high max runtime.
test_groups:
- name: some-tests
  gcs_prefix: path/to/test/logs/some-tests
  max_test_runtime_hours: 50  # Leave a small buffer just in case.

Ignore Pending Results

ignore_pending is false by default, which means that in-progress results will be shown if we have data for them. If you want to have these not show up, add:

test_groups:
- name: kubernetes-build
  gcs_prefix: kubernetes-jenkins/logs/ci-kubernetes-build
  ignore_pending: true

Showing a metric in the cells

Specify short_text_metric to display a custom numeric metric in the TestGrid cells. Example:

test_groups:
- name: ci-kubernetes-coverage-conformance
  gcs_prefix: kubernetes-jenkins/logs/ci-kubernetes-coverage-conformance
  short_text_metric: coverage

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

config.md

config.md

TestGrid Configuration

Table of Contents

Prow Job Configuration

Configuration

Test groups

Dashboard Tabs

Dashboards

Dashboard groups

Testing your configuration

Advanced configuration

More/Fewer Results

Tab descriptions

Link/Bug/Regression-Search Templates

Column headers

Email alerts

Base options

More informative test names

Customize regression search

Notifications

What Counts as 'Recent'

Long-Running Tests

Ignore Pending Results

Showing a metric in the cells

Files

config.md

Latest commit

History

config.md

File metadata and controls

TestGrid Configuration

Table of Contents

Prow Job Configuration

Configuration

Test groups

Dashboard Tabs

Dashboards

Dashboard groups

Testing your configuration

Advanced configuration

More/Fewer Results

Tab descriptions

Link/Bug/Regression-Search Templates

Column headers

Email alerts

Base options

More informative test names

Customize regression search

Notifications

What Counts as 'Recent'

Long-Running Tests

Ignore Pending Results

Showing a metric in the cells