From d7f451bd75f7119a4e79221c573dbf881ff23f4c Mon Sep 17 00:00:00 2001 From: John Doe Date: Sun, 11 Feb 2024 18:24:25 +0000 Subject: [PATCH] chore(i18n): import translations --- src/i18n/locales/en.json | 3510 +++++++++++++++++++++----------------- 1 file changed, 1905 insertions(+), 1605 deletions(-) diff --git a/src/i18n/locales/en.json b/src/i18n/locales/en.json index aad9e42b4..dfd13f51d 100644 --- a/src/i18n/locales/en.json +++ b/src/i18n/locales/en.json @@ -55,108 +55,106 @@ "select_extension_to_edit": "Select extension to edit" }, "featureDescriptions": { - "3": "3", - "Auto off after specific time.": "Auto off after specific time.", - "Away mode": "Away mode", - "Away preset days": "Away preset days", - "Away preset temperature": "Away preset temperature", - "Boost time": "Boost time", + "On/off state of this light": "On/off state of this light", "Brightness of this light": "Brightness of this light", - "Calibration time": "Calibration time", - "Color of this light expressed as hue/saturation": "Color of this light expressed as hue/saturation", - "Color of this light in the CIE 1931 color space (x/y)": "Color of this light in the CIE 1931 color space (x/y)", - "Color temperature after cold power on of this light": "Color temperature after cold power on of this light", "Color temperature of this light": "Color temperature of this light", - "Comfort temperature": "Comfort temperature", - "Controls the behavior when the device is powered on": "Controls the behavior when the device is powered on", - "Controls the behaviour when the device is powered on": "Controls the behaviour when the device is powered on", - "Current temperature measured on the device": "Current temperature measured on the device", - "Decoupled mode for center button": "Decoupled mode for center button", - "Decoupled mode for left button": "Decoupled mode for left button", - "Decoupled mode for right button": "Decoupled mode for right button", - "Eco temperature": "Eco temperature", - "Enable/disable auto lock": "Enable/disable auto lock", - "Enable/disable away mode": "Enable/disable away mode", - "Enables/disables physical input on the device": "Enables/disables physical input on the device", - "Enables/disables window detection on the device": "Enables/disables window detection on the device", - "Enabling prevents both relais being on at the same time": "Enabling prevents both relais being on at the same time", - "Force the valve position": "Force the valve position", - "Indicates if CO (carbon monoxide) is detected": "Indicates if CO (carbon monoxide) is detected", - "Indicates if the battery of this device is almost empty": "Indicates if the battery of this device is almost empty", - "Indicates if the contact is closed (= true) or open (= false)": "Indicates if the contact is closed (= true) or open (= false)", - "Indicates whether the device detected a water leak": "Indicates whether the device detected a water leak", - "Indicates whether the device detected occupancy": "Indicates whether the device detected occupancy", - "Indicates whether the device detected smoke": "Indicates whether the device detected smoke", - "Indicates whether the device is tampered": "Indicates whether the device is tampered", - "Instantaneous measured electrical current": "Instantaneous measured electrical current", - "Instantaneous measured power": "Instantaneous measured power", + "Color temperature after cold power on of this light": "Color temperature after cold power on of this light", + "Color of this light in the CIE 1931 color space (x/y)": "Color of this light in the CIE 1931 color space (x/y)", + "Triggers an effect on the light (e.g. make light blink for a few seconds)": "Triggers an effect on the light (e.g. make light blink for a few seconds)", + "Controls the behavior when the device is powered on after power loss": "Controls the behavior when the device is powered on after power loss", "Link quality (signal strength)": "Link quality (signal strength)", - "Maximum temperature": "Maximum temperature", - "Measured electrical potential value": "Measured electrical potential value", - "Measured illuminance in lux": "Measured illuminance in lux", - "Measured relative humidity": "Measured relative humidity", - "Measured temperature value": "Measured temperature value", - "Minimum temperature": "Minimum temperature", - "Mode of this device (similar to system_mode)": "Mode of this device (similar to system_mode)", + "Temperature setpoint": "Temperature setpoint", + "Current temperature measured on the device": "Current temperature measured on the device", "Mode of this device": "Mode of this device", - "Motor speed": "Motor speed", + "The current running state": "The current running state", "Offset to be used in the local_temperature": "Offset to be used in the local_temperature", + "Mode of the fan": "Mode of the fan", "On/off state of the switch": "On/off state of the switch", - "On/off state of this light": "On/off state of this light", "Position of this cover": "Position of this cover", - "Position": "Position", - "Raw measured illuminance": "Raw measured illuminance", + "Motor speed": "Motor speed", "Recover state after power outage": "Recover state after power outage", - "Remaining battery in %": "Remaining battery in %", - "Side of the cube": "Side of the cube", - "Sum of consumed energy": "Sum of consumed energy", - "Temperature setpoint": "Temperature setpoint", - "The measured atmospheric pressure": "The measured atmospheric pressure", + "Remaining battery in %, can take up to 24 hours before reported.": "Remaining battery in %, can take up to 24 hours before reported.", "Triggered action (e.g. a button click)": "Triggered action (e.g. a button click)", - "Triggers an effect on the light (e.g. make light blink for a few seconds)": "Triggers an effect on the light (e.g. make light blink for a few seconds)", - "Voltage of the battery in millivolts": "Voltage of the battery in millivolts", - "Week format user for schedule": "Week format user for schedule", - "Boost Heating: press and hold \"+\" for 3 seconds, the device will enter the boost heating mode, and the ▷╵◁ will flash. The countdown will be displayed in the APP": "Boost Heating: press and hold \"+\" for 3 seconds, the device will enter the boost heating mode, and the ▷╵◁ will flash. The countdown will be displayed in the APP", - "Boost Time Setting 100 sec - 900 sec, (default = 300 sec)": "Boost Time Setting 100 sec - 900 sec, (default = 300 sec)", - "Countdown in minutes": "Countdown in minutes", - "ECO mode (energy saving mode)": "ECO mode (energy saving mode)", - "Indicates whether the device detected presence": "Indicates whether the device detected presence", - "Indicates whether the device detected vibration": "Indicates whether the device detected vibration", - "Schedule MODE ⏱ - In this mode, the device executes a preset week programming temperature time and temperature.": "Schedule MODE ⏱ - In this mode, the device executes a preset week programming temperature time and temperature.", - "Speed of movement": "Speed of movement", - "Window status closed or open ": "Window status closed or open ", - "Alarm temperature max": "Alarm temperature max", - "Alarm temperature min": "Alarm temperature min", - "Alarm humidity status": "Alarm humidity status", - "Alarm temperature status": "Alarm temperature status", - "Measured soil moisture value": "Measured soil moisture value", - "The current running state": "The current running state", - "Position of the valve (= demanded heat) where 0% is fully closed and 100% is fully open": "Position of the valve (= demanded heat) where 0% is fully closed and 100% is fully open", + "Do not disturb mode, when enabled this function will keep the light OFF after a power outage": "Do not disturb mode, when enabled this function will keep the light OFF after a power outage", + "Power on behavior state": "Power on behavior state", + "Instantaneous measured power": "Instantaneous measured power", + "Indicates if the battery of this device is almost empty": "Indicates if the battery of this device is almost empty", + "Color of this light expressed as hue/saturation": "Color of this light expressed as hue/saturation", "State of the lock": "State of the lock", "Actual state of the lock": "Actual state of the lock", + "Triggered action on the lock": "Triggered action on the lock", "User ID to set or clear the pincode for": "User ID to set or clear the pincode for", + "Type of user, unrestricted: owner (default), (year|week)_day_schedule: user has ability to open lock based on specific time period, master: user has ability to both program and operate the door lock, non_access: user is recognized by the lock but does not have the ability to open the lock": "Type of user, unrestricted: owner (default), (year|week)_day_schedule: user has ability to open lock based on specific time period, master: user has ability to both program and operate the door lock, non_access: user is recognized by the lock but does not have the ability to open the lock", "Whether the user is enabled/disabled": "Whether the user is enabled/disabled", "Pincode to set, set pincode to null to clear": "Pincode to set, set pincode to null to clear", - "Click mode, fast: only supports single click which will be send immediately after clicking, multi: supports more events like double and hold": "Click mode, fast: only supports single click which will be send immediately after clicking, multi: supports more events like double and hold", + "Source of the triggered action on the lock": "Source of the triggered action on the lock", + "ID of user that triggered the action on the lock": "ID of user that triggered the action on the lock", + "The number of seconds to wait after unlocking a lock before it automatically locks again. 0=disabled": "The number of seconds to wait after unlocking a lock before it automatically locks again. 0=disabled", + "Sound volume of the lock": "Sound volume of the lock", + "Decoupled mode for left button": "Decoupled mode for left button", + "Decoupled mode for center button": "Decoupled mode for center button", + "Decoupled mode for right button": "Decoupled mode for right button", + "Temperature of the device": "Temperature of the device", + "After turn on, the indicator light turns on while switch is off, and vice versa": "After turn on, the indicator light turns on while switch is off, and vice versa", + "Sum of consumed energy": "Sum of consumed energy", + "Measured electrical potential value": "Measured electrical potential value", + "Decoupled mode": "Decoupled mode", + "Enable/disable the power outage memory, this recovers the on/off mode after power failure": "Enable/disable the power outage memory, this recovers the on/off mode after power failure", + "Enable/disable the LED at night": "Enable/disable the LED at night", + "Voltage of the battery in millivolts": "Voltage of the battery in millivolts", + "Number of power outages": "Number of power outages", + "[Soft Switch]: There is a configuration window, opens once an hour on itself, only during which the cube will respond to mode switch. Mode switch will be scheduled to take effect when the window becomes available. You can also give it a throw action (no backward motion) to force a respond! Otherwise, you may open lid and click LINK once to make the cube respond immediately. [Hard Switch]: Open lid and click LINK button 5 times.": "[Soft Switch]: There is a configuration window, opens once an hour on itself, only during which the cube will respond to mode switch. Mode switch will be scheduled to take effect when the window becomes available. You can also give it a throw action (no backward motion) to force a respond! Otherwise, you may open lid and click LINK once to make the cube respond immediately. [Hard Switch]: Open lid and click LINK button 5 times.", + "Side of the cube": "Side of the cube", + "Triggered action": "Triggered action", + "Number of power outages (since last pairing)": "Number of power outages (since last pairing)", + "Start feeding": "Start feeding", + "Feeding source": "Feeding source", + "Feeding size": "Feeding size", + "Portions per day": "Portions per day", + "Weight per day": "Weight per day", + "Indicates whether there is an error with the feeder": "Indicates whether there is an error with the feeder", + "Feeding schedule": "Feeding schedule", + "Led indicator": "Led indicator", + "Enables/disables physical input on the device": "Enables/disables physical input on the device", + "Feeding mode": "Feeding mode", + "One serving size": "One serving size", + "Portion weight": "Portion weight", + "Indicates if the device is in setup mode (E11)": "Indicates if the device is in setup mode (E11)", + "Current temperature measured by the internal or external sensor": "Current temperature measured by the internal or external sensor", + "Mode of this device (similar to system_mode)": "Mode of this device (similar to system_mode)", + "Select temperature sensor to use": "Select temperature sensor to use", + "Is the valve calibrated": "Is the valve calibrated", + "Enables/disables window detection on the device": "Enables/disables window detection on the device", + "Determines if temperature control abnormalities should be detected": "Determines if temperature control abnormalities should be detected", + "Valve detection": "Valve detection", + "Notifies of a temperature control abnormality if valve detection is enabled (e.g., thermostat not installed correctly, valve failure or incorrect calibration, incorrect link to external temperature sensor)": "Notifies of a temperature control abnormality if valve detection is enabled (e.g., thermostat not installed correctly, valve failure or incorrect calibration, incorrect link to external temperature sensor)", + "Away preset temperature": "Away preset temperature", + "When being ON, the thermostat will change its state based on your settings": "When being ON, the thermostat will change its state based on your settings", + "Smart schedule configuration (default: mon,tue,wed,thu,fri|8:00,24.0|18:00,17.0|23:00,22.0|8:00,22.0)": "Smart schedule configuration (default: mon,tue,wed,thu,fri|8:00,24.0|18:00,17.0|23:00,22.0|8:00,22.0)", "Click mode, fast: only supports single click which will be send immediately after clicking.multi: supports more events like double and hold": "Click mode, fast: only supports single click which will be send immediately after clicking.multi: supports more events like double and hold", + "Operation mode, select \"command\" to enable bindings (wake up the device before changing modes!)": "Operation mode, select \"command\" to enable bindings (wake up the device before changing modes!)", + "Click mode, fast: only supports single click which will be send immediately after clicking, multi: supports more events like double and hold": "Click mode, fast: only supports single click which will be send immediately after clicking, multi: supports more events like double and hold", "Button mode": "Button mode", "Rotation angle": "Rotation angle", "Rotation angle speed": "Rotation angle speed", "Rotation percent": "Rotation percent", "Rotation percent speed": "Rotation percent speed", "Rotation time": "Rotation time", - "Enable/disable the power outage memory, this recovers the on/off mode after power failure": "Enable/disable the power outage memory, this recovers the on/off mode after power failure", - "Enable/disable the LED at night": "Enable/disable the LED at night", + "Instantaneous measured electrical current": "Instantaneous measured electrical current", "Disables the physical switch button": "Disables the physical switch button", "Maximum allowed load, turns off if exceeded": "Maximum allowed load, turns off if exceeded", + "Indicates if the contact is closed (= true) or open (= false)": "Indicates if the contact is closed (= true) or open (= false)", "Control both relay and usb or only the relay with the physical switch button": "Control both relay and usb or only the relay with the physical switch button", + "Raw measured illuminance": "Raw measured illuminance", + "Measured illuminance in lux": "Measured illuminance in lux", "Time interval in seconds to report after light changes": "Time interval in seconds to report after light changes", - "Decoupled mode": "Decoupled mode", "Indicates whether a plug is physically attached. Device does not have to pull power or even be connected electrically (state of this binary switch can be ON even if main power switch is OFF)": "Indicates whether a plug is physically attached. Device does not have to pull power or even be connected electrically (state of this binary switch can be ON even if main power switch is OFF)", + "Measured temperature value": "Measured temperature value", + "Measured relative humidity": "Measured relative humidity", "Measured VOC value": "Measured VOC value", + "Units to show on the display": "Units to show on the display", "Anti flicker mode can be used to solve blinking issues of some lights.Quick mode makes the device respond faster.": "Anti flicker mode can be used to solve blinking issues of some lights.Quick mode makes the device respond faster.", "Decoupled mode for button": "Decoupled mode for button", - "Operation mode, select \"command\" to enable bindings (wake up the device before changing modes!)": "Operation mode, select \"command\" to enable bindings (wake up the device before changing modes!)", "Enable standby": "Enable standby", "Display theme": "Display theme", "Beep volume": "Beep volume", @@ -176,33 +174,102 @@ "Switch 2 text and icon": "Switch 2 text and icon", "Switch 3 text and icon": "Switch 3 text and icon", "Wall switch type": "Wall switch type", - "Temperature of the device": "Temperature of the device", + "Enabling prevents both relais being on at the same time": "Enabling prevents both relais being on at the same time", + "Pulling curtains by hand starts the motor": "Pulling curtains by hand starts the motor", + "Calibrate the position limits": "Calibrate the position limits", + "Motor state": "Motor state", + "Whether the motor is moving or not": "Whether the motor is moving or not", + "Lock the curtain driver hooks": "Lock the curtain driver hooks", + "Hooks state": "Hooks state", + "Target position": "Target position", + "The current power source": "The current power source", + "The current charging state": "The current charging state", + "The current charging status.": "The current charging status.", + "The current state of the motor.": "The current state of the motor.", + "Indicates whether the device detected vibration": "Indicates whether the device detected vibration", + "Indicates whether the device detected smoke": "Indicates whether the device detected smoke", + "Value of smoke concentration": "Value of smoke concentration", + "Value of smoke concentration in dB/m": "Value of smoke concentration in dB/m", + "Starts the self-test process (checking the indicator light and buzzer work properly)": "Starts the self-test process (checking the indicator light and buzzer work properly)", + "Self-test in progress": "Self-test in progress", + "The buzzer can be muted and alarmed manually. During a smoke alarm, the buzzer can be manually muted for 80 seconds (\"mute\") and unmuted (\"alarm\"). The buzzer cannot be pre-muted, as this function only works during a smoke alarm. During the absence of a smoke alarm, the buzzer can be manually alarmed (\"alarm\") and disalarmed (\"mute\"), but for this \"linkage_alarm\" option must be enabled": "The buzzer can be muted and alarmed manually. During a smoke alarm, the buzzer can be manually muted for 80 seconds (\"mute\") and unmuted (\"alarm\"). The buzzer cannot be pre-muted, as this function only works during a smoke alarm. During the absence of a smoke alarm, the buzzer can be manually alarmed (\"alarm\") and disalarmed (\"mute\"), but for this \"linkage_alarm\" option must be enabled", + "Buzzer alarmed (manually)": "Buzzer alarmed (manually)", + "Buzzer muted (manually)": "Buzzer muted (manually)", + "When this option is enabled then in the normal monitoring state, the green indicator light flashes every 60 seconds": "When this option is enabled then in the normal monitoring state, the green indicator light flashes every 60 seconds", + "When this option is enabled and a smoke alarm has occurred, then \"linkage_alarm_state\"=true, and when the smoke alarm has ended or the buzzer has been manually muted, then \"linkage_alarm_state\"=false": "When this option is enabled and a smoke alarm has occurred, then \"linkage_alarm_state\"=true, and when the smoke alarm has ended or the buzzer has been manually muted, then \"linkage_alarm_state\"=false", + "\"linkage_alarm\" is triggered": "\"linkage_alarm\" is triggered", "Indicates whether the device detected gas": "Indicates whether the device detected gas", + "Value of gas concentration": "Value of gas concentration", + "Gas concentration value at which an alarm is triggered (\"10%LEL\" is more sensitive than \"15%LEL\")": "Gas concentration value at which an alarm is triggered (\"10%LEL\" is more sensitive than \"15%LEL\")", + "The buzzer can be muted and alarmed manually. During a gas alarm, the buzzer can be manually muted for 10 minutes (\"mute\"), but cannot be unmuted manually before this timeout expires. The buzzer cannot be pre-muted, as this function only works during a gas alarm. During the absence of a gas alarm, the buzzer can be manually alarmed (\"alarm\") and disalarmed (\"mute\"), but for this \"linkage_alarm\" option must be enabled": "The buzzer can be muted and alarmed manually. During a gas alarm, the buzzer can be manually muted for 10 minutes (\"mute\"), but cannot be unmuted manually before this timeout expires. The buzzer cannot be pre-muted, as this function only works during a gas alarm. During the absence of a gas alarm, the buzzer can be manually alarmed (\"alarm\") and disalarmed (\"mute\"), but for this \"linkage_alarm\" option must be enabled", + "When this option is enabled and a gas alarm has occurred, then \"linkage_alarm_state\"=true, and when the gas alarm has ended or the buzzer has been manually muted, then \"linkage_alarm_state\"=false": "When this option is enabled and a gas alarm has occurred, then \"linkage_alarm_state\"=true, and when the gas alarm has ended or the buzzer has been manually muted, then \"linkage_alarm_state\"=false", + "\"Preparation\" or \"work\" (measurement of the gas concentration value and triggering of an alarm are only performed in the \"work\" state)": "\"Preparation\" or \"work\" (measurement of the gas concentration value and triggering of an alarm are only performed in the \"work\" state)", + "Indicates whether the device is tampered": "Indicates whether the device is tampered", "Test mode activated": "Test mode activated", - "If the power is constantly lower than 2W within half an hour, the plug will be automatically turned off": "If the power is constantly lower than 2W within half an hour, the plug will be automatically turned off", + "Turn the device automatically off when attached device consumes less than 2W for 30 minutes": "Turn the device automatically off when attached device consumes less than 2W for 30 minutes", "Device temperature (polled every 30 min)": "Device temperature (polled every 30 min)", "Turn the device automatically off when attached device consumes less than 2W for 20 minutes": "Turn the device automatically off when attached device consumes less than 2W for 20 minutes", + "Indicates whether the device detected a water leak": "Indicates whether the device detected a water leak", + "Indicates whether the device detected presence": "Indicates whether the device detected presence", + "Presence events: \"enter\", \"leave\", \"left_enter\", \"right_leave\", \"right_enter\", \"left_leave\", \"approach\", \"away\"": "Presence events: \"enter\", \"leave\", \"left_enter\", \"right_leave\", \"right_enter\", \"left_leave\", \"approach\", \"away\"", + "Monitoring mode with or without considering right and left sides": "Monitoring mode with or without considering right and left sides", + "The distance at which the sensor detects approaching": "The distance at which the sensor detects approaching", + "Different sensitivities means different static human body recognition rate and response speed of occupied": "Different sensitivities means different static human body recognition rate and response speed of occupied", + "Reset the status of no presence": "Reset the status of no presence", + "Most recent region event. Event template is \"region__\", where is region number (1-10), is one of \"enter\", \"leave\", \"occupied\", \"unoccupied\". \"enter\" / \"leave\" events are usually triggered first, followed by \"occupied\" / \"unoccupied\" after a couple of seconds.": "Most recent region event. Event template is \"region__\", where is region number (1-10), is one of \"enter\", \"leave\", \"occupied\", \"unoccupied\". \"enter\" / \"leave\" events are usually triggered first, followed by \"occupied\" / \"unoccupied\" after a couple of seconds.", + "Definition of a new region to be added (or replace existing one). Creating or modifying a region requires you to define which zones of a 7x4 detection grid should be active for that zone. Regions can overlap, meaning that a zone can be defined in more than one region (eg. \"zone x = 1 & y = 1\" can be added to region 1 & 2). \"Zone x = 1 & y = 1\" is the nearest zone on the right (from sensor's perspective, along the detection path).": "Definition of a new region to be added (or replace existing one). Creating or modifying a region requires you to define which zones of a 7x4 detection grid should be active for that zone. Regions can overlap, meaning that a zone can be defined in more than one region (eg. \"zone x = 1 & y = 1\" can be added to region 1 & 2). \"Zone x = 1 & y = 1\" is the nearest zone on the right (from sensor's perspective, along the detection path).", + "list of dictionaries in the format {\"x\": 1, \"y\": 1}, {\"x\": 2, \"y\": 1}": "list of dictionaries in the format {\"x\": 1, \"y\": 1}, {\"x\": 2, \"y\": 1}", + "Region definition to be deleted from the device.": "Region definition to be deleted from the device.", + "Indicates whether the device detected occupancy": "Indicates whether the device detected occupancy", + "Time interval for detecting actions": "Time interval for detecting actions", + ". Press pairing button right before changing this otherwise it will fail.": ". Press pairing button right before changing this otherwise it will fail.", + "Time interval for detecting actions. Press pairing button right before changing this otherwise it will fail.": "Time interval for detecting actions. Press pairing button right before changing this otherwise it will fail.", + "When this option is enabled then blue LED will blink once when motion is detected. Press pairing button right before changing this otherwise it will fail.": "When this option is enabled then blue LED will blink once when motion is detected. Press pairing button right before changing this otherwise it will fail.", + "The measured atmospheric pressure": "The measured atmospheric pressure", "Operation mode for left button": "Operation mode for left button", "Operation mode for right button": "Operation mode for right button", + "Decoupled mode for top button": "Decoupled mode for top button", + "Decoupled mode for bottom button": "Decoupled mode for bottom button", + "Switch between rgbw mode or dual color temperature mode": "Switch between rgbw mode or dual color temperature mode", + "The sensor will be considered \"off\" within the set distance. Please press the device button before setting": "The sensor will be considered \"off\" within the set distance. Please press the device button before setting", + "Measured PM2.5 (particulate matter) concentration": "Measured PM2.5 (particulate matter) concentration", + "The measured CO2 (carbon dioxide) value": "The measured CO2 (carbon dioxide) value", + "Mode of the warning (sound effect)": "Mode of the warning (sound effect)", + "Sound level": "Sound level", + "Intensity of the strobe": "Intensity of the strobe", + "Turn on/off the strobe (light) during warning": "Turn on/off the strobe (light) during warning", + "Length of the flash cycle": "Length of the flash cycle", + "Duration in seconds of the alarm": "Duration in seconds of the alarm", + "Is the device plugged in": "Is the device plugged in", + "Volume of siren": "Volume of siren", + "Duration of siren": "Duration of siren", + "Smoke alarm status": "Smoke alarm status", + "Test alarm": "Test alarm", + "Test alarm result": "Test alarm result", + "Battery level state": "Battery level state", + "Alarm enable": "Alarm enable", + "Fault alarm status": "Fault alarm status", + "Silence siren": "Silence siren", + "Days on which the schedule will be active.": "Days on which the schedule will be active.", "Detected by sudden temperature drop or set manually.": "Detected by sudden temperature drop or set manually.", "Manually set window_open, ~1 minute to take affect.": "Manually set window_open, ~1 minute to take affect.", "Pin code introduced.": "Pin code introduced.", "Last action transaction number.": "Last action transaction number.", "Alarm zone. Default value 0": "Alarm zone. Default value 0", + "The current running mode": "The current running mode", + "Position of the valve (= demanded heat) where 0% is fully closed and 100% is fully open": "Position of the valve (= demanded heat) where 0% is fully closed and 100% is fully open", + "When Vacation Mode is active the schedule is disabled and unoccupied_heating_setpoint is used.": "When Vacation Mode is active the schedule is disabled and unoccupied_heating_setpoint is used.", "Tilt of this cover": "Tilt of this cover", - "Configure genLevelCtrl": "Configure genLevelCtrl", - "Represents the time taken to move to or from the target level when On of Off commands are received by an On/Off cluster": "Represents the time taken to move to or from the target level when On of Off commands are received by an On/Off cluster", - "Represents the time taken to move the current level from the minimum level to the maximum level when an On command is received": "Represents the time taken to move the current level from the minimum level to the maximum level when an On command is received", - "Represents the time taken to move the current level from the maximum level to the minimum level when an Off command is received": "Represents the time taken to move the current level from the maximum level to the minimum level when an Off command is received", - "Defines the desired startup level for a device when it is supplied with power": "Defines the desired startup level for a device when it is supplied with power", - "Specifies the minimum light output the ballast can achieve.": "Specifies the minimum light output the ballast can achieve.", - "Specifies the maximum light output the ballast can achieve.": "Specifies the maximum light output the ballast can achieve.", + "Specifies the amount of time, in units of 0.1 seconds, which will be used during a transition to either the on or off state, when an on/off/toggle command of the on/off cluster is used to turn the light on or off": "Specifies the amount of time, in units of 0.1 seconds, which will be used during a transition to either the on or off state, when an on/off/toggle command of the on/off cluster is used to turn the light on or off", + "Specifies the level that shall be applied, when an on/toggle command causes the light to turn on.": "Specifies the level that shall be applied, when an on/toggle command causes the light to turn on.", + "Defines if you can send a brightness change without to turn on the light": "Defines if you can send a brightness change without to turn on the light", + "Specifies the initial level to be applied after the device is supplied with power": "Specifies the initial level to be applied after the device is supplied with power", "Specifies the minimum light output of the ballast": "Specifies the minimum light output of the ballast", "Specifies the maximum light output of the ballast": "Specifies the maximum light output of the ballast", - "Specifies the minimum light output after switching on": "Specifies the minimum light output after switching on", + "Specifies the minimum level that shall be applied, when an on/toggle command causes the light to turn on. When this attribute is set to the invalid value (255) this feature is disabled and standard rules apply: The light will either return to the previously active level (before it was turned off) if the OnLevel attribute is set to the invalid value (255/previous); or to the specified value of the OnLevel attribute if this value is in the range 0…254. Otherwise, if the MinimumOnLevel is in the range 0…254, the light will be set to the the previously active level (before it was turned off), or the value specified here, whichever is the larger value. For example, if the previous level was 30 and the MinimumOnLevel was 40 then the light would turn on and move to level 40. Conversely, if the previous level was 50, and the MinimumOnLevel was 40, then the light would turn on and move to level 50.": "Specifies the minimum level that shall be applied, when an on/toggle command causes the light to turn on. When this attribute is set to the invalid value (255) this feature is disabled and standard rules apply: The light will either return to the previously active level (before it was turned off) if the OnLevel attribute is set to the invalid value (255/previous); or to the specified value of the OnLevel attribute if this value is in the range 0…254. Otherwise, if the MinimumOnLevel is in the range 0…254, the light will be set to the the previously active level (before it was turned off), or the value specified here, whichever is the larger value. For example, if the previous level was 30 and the MinimumOnLevel was 40 then the light would turn on and move to level 40. Conversely, if the previous level was 50, and the MinimumOnLevel was 40, then the light would turn on and move to level 50.", "The dimmer supports AC forward phase control.": "The dimmer supports AC forward phase control.", "The dimmer supports AC reverse phase control.": "The dimmer supports AC reverse phase control.", - "The dimmer is capable of measuring the reactanceto distinguish inductive and capacitive loads.": "The dimmer is capable of measuring the reactance to distinguish inductive and capacitive loads.", + "The dimmer is capable of measuring the reactanceto distinguish inductive and capacitive loads.": "The dimmer is capable of measuring the reactanceto distinguish inductive and capacitive loads.", "The dimmer is capable of replacing the built-in, default dimming curve.": "The dimmer is capable of replacing the built-in, default dimming curve.", "The dimmer is capable of detecting an output overload and shutting the output off.": "The dimmer is capable of detecting an output overload and shutting the output off.", "The dimmer is currently operating in AC forward phase control mode.": "The dimmer is currently operating in AC forward phase control mode.", @@ -211,85 +278,622 @@ "The dimmer's reactance discriminator had detected a capacitive load.": "The dimmer's reactance discriminator had detected a capacitive load.", "The dimmer's reactance discriminator had detected an inductive load.": "The dimmer's reactance discriminator had detected an inductive load.", "Configures the dimming technique.": "Configures the dimming technique.", - "Operation mode: \"command\" - for group control, \"event\" - for clicks": "Operation mode: \"command\" - for group control, \"event\" - for clicks", - "direction of movement from the point of view of the radar": "direction of movement from the point of view of the radar", - "sensitivity of the radar": "sensitivity of the radar", - "O-Sensitivity mode": "O-Sensitivity mode", - "V-Sensitivity mode": "V-Sensitivity mode", - "Led status switch": "Led status switch", - "Vacancy delay": "Vacancy delay", - "Light-On luminance prefer": "Light-On luminance prefer", - "Light-Off luminance prefer": "Light-Off luminance prefer", + "Total Dissolved Solids": "Total Dissolved Solids", + "pH value, if the pH value is lower than 6.5, it means that the water quality is too acidic and has impurities, and it is necessary to add disinfectant water for disinfection": "pH value, if the pH value is lower than 6.5, it means that the water quality is too acidic and has impurities, and it is necessary to add disinfectant water for disinfection", + "Electrical conductivity": "Electrical conductivity", + "Oxidation Reduction Potential value. If the ORP value is above 850mv, it means that the disinfectant has been added too much, and it is necessary to add water or change the water for neutralization. If the ORP value is below 487mv, it means that too little disinfectant has been added and the pool needs to be disinfected again": "Oxidation Reduction Potential value. If the ORP value is above 850mv, it means that the disinfectant has been added too much, and it is necessary to add water or change the water for neutralization. If the ORP value is below 487mv, it means that too little disinfectant has been added and the pool needs to be disinfected again", + "Free chlorine value. The water in the swimming pool should be between 6.5-8ph and ORP should be between 487-840mv, and the chlorine value will be displayed normally. Chlorine will not be displayed if either value is out of range": "Free chlorine value. The water in the swimming pool should be between 6.5-8ph and ORP should be between 487-840mv, and the chlorine value will be displayed normally. Chlorine will not be displayed if either value is out of range", + "pH maximal value": "pH maximal value", + "pH minimal value": "pH minimal value", + "Electrical Conductivity maximal value": "Electrical Conductivity maximal value", + "Electrical Conductivity minimal value": "Electrical Conductivity minimal value", + "Oxidation Reduction Potential maximal value": "Oxidation Reduction Potential maximal value", + "Oxidation Reduction Potential minimal value": "Oxidation Reduction Potential minimal value", + "Free Chlorine maximal value": "Free Chlorine maximal value", + "Free Chlorine minimal value": "Free Chlorine minimal value", + "Salt value": "Salt value", + "Detection delay": "Detection delay", + "Distance of detected person": "Distance of detected person", + "Detection sensitivity": "Detection sensitivity", + "Detection keep time": "Detection keep time", + "Minimum detection range": "Minimum detection range", + "Maximum detection range": "Maximum detection range", + "Turn the thermostat ON/OFF": "Turn the thermostat ON/OFF", + "Minimum temperature": "Minimum temperature", + "Maximum temperature": "Maximum temperature", + "ECO mode ON/OFF": "ECO mode ON/OFF", + "ECO Heating energy-saving temperature (default: 20 ºC)": "ECO Heating energy-saving temperature (default: 20 ºC)", + "ECO Cooling energy-saving temperature (default: 26 ºC)": "ECO Cooling energy-saving temperature (default: 26 ºC)", + "The delta between local_temperature and current_heating_setpoint to trigger Heat": "The delta between local_temperature and current_heating_setpoint to trigger Heat", + "3-Way Valve status": "3-Way Valve status", + "Manual = ON or Schedule = OFF": "Manual = ON or Schedule = OFF", + "Schedule for monday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"": "Schedule for monday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"", + "Schedule for tuesday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"": "Schedule for tuesday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"", + "Schedule for wednesday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"": "Schedule for wednesday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"", + "Schedule for thursday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"": "Schedule for thursday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"", + "Schedule for friday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"": "Schedule for friday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"", + "Schedule for saturday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"": "Schedule for saturday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"", + "Schedule for sunday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"": "Schedule for sunday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"", + "Measured electrical AC frequency": "Measured electrical AC frequency", + "Instantaneous measured power (phase A)": "Instantaneous measured power (phase A)", + "Instantaneous measured power (phase B)": "Instantaneous measured power (phase B)", + "Instantaneous measured power (phase AB)": "Instantaneous measured power (phase AB)", + "Instantaneous measured electrical current (phase A)": "Instantaneous measured electrical current (phase A)", + "Instantaneous measured electrical current (phase B)": "Instantaneous measured electrical current (phase B)", + "Instantaneous measured power factor (phase A)": "Instantaneous measured power factor (phase A)", + "Instantaneous measured power factor (phase B)": "Instantaneous measured power factor (phase B)", + "Direction of energy (phase A)": "Direction of energy (phase A)", + "Direction of energy (phase B)": "Direction of energy (phase B)", + "Sum of consumed energy (phase A)": "Sum of consumed energy (phase A)", + "Sum of consumed energy (phase B)": "Sum of consumed energy (phase B)", + "Sum of produced energy (phase A)": "Sum of produced energy (phase A)", + "Sum of produced energy (phase B)": "Sum of produced energy (phase B)", + "Update frequency": "Update frequency", + "Distance to target": "Distance to target", + "Sensitivity of the radar": "Sensitivity of the radar", + "Entry sensitivity": "Entry sensitivity", + "Illumination threshold for switching on": "Illumination threshold for switching on", + "Detection range": "Detection range", + "Shield range of the radar": "Shield range of the radar", + "Entry distance indentation": "Entry distance indentation", + "Entry filter time": "Entry filter time", + "Turn off delay": "Turn off delay", + "Block time": "Block time", + "Breaker status changes with breaker_mode->standard": "Breaker status changes with breaker_mode->standard", + "Status breaker mode: standard is external, local is auto": "Status breaker mode: standard is external, local is auto", + "Led backlight when triggered": "Led backlight when triggered", + "Presence state": "Presence state", + "Motion sensitivity": "Motion sensitivity", + "Max detection distance": "Max detection distance", + "Min detection distance": "Min detection distance", + "Delay time": "Delay time", + "Presence sensitivity": "Presence sensitivity", + "Turn the light of the alarm ON/OFF": "Turn the light of the alarm ON/OFF", + "Alarm type": "Alarm type", + "Volume of the alarm": "Volume of the alarm", + "Ringtone of the alarm": "Ringtone of the alarm", + "Power type": "Power type", + "Duration of the alarm": "Duration of the alarm", + "Minimum range": "Minimum range", + "Maximum range": "Maximum range", + "Fading time": "Fading time", + "Presets for sensitivity for presence and movement": "Presets for sensitivity for presence and movement", + "Sets the mode of the switch to act as a switch or as a scene": "Sets the mode of the switch to act as a switch or as a scene", + "'Sets the indicator mode of l1.\n Normal: Orange while off and white while on.\n On: Always white. Off: Always orange.\n Flash: Flashes white when triggered.\n Note: Orange light will turn off after light off delay, white light always stays on. Light mode updates on next state change.'": "'Sets the indicator mode of l1.\n Normal: Orange while off and white while on.\n On: Always white. Off: Always orange.\n Flash: Flashes white when triggered.\n Note: Orange light will turn off after light off delay, white light always stays on. Light mode updates on next state change.'", + "Mode of the backlight": "Mode of the backlight", + "light off delay": "light off delay", + "All Switches": "All Switches", + "Countdown to turn device off after a certain time": "Countdown to turn device off after a certain time", "Working mode": "Working mode", - "Luminance level": "Luminance level", - "Reference luminance": "Reference luminance", - "Vacant confirm time": "Vacant confirm time", - "Volume of siren": "Volume of siren", - "Switch type settings": "Switch type settings", - "Minimum light brightness": "Minimum light brightness", - "Device valve is open or closed (heating or not)": "Device valve is open or closed (heating or not)", - "MANUAL MODE ☝ - In this mode, the device executes manual temperature setting. When the set temperature is lower than the \"minimum temperature\", the valve is closed (forced closed). AUTO MODE ⏱ - In this mode, the device executes a preset week programming temperature time and temperature. ON - In this mode, the thermostat stays open OFF - In this mode, the thermostat stays closed": "MANUAL MODE ☝ - In this mode, the device executes manual temperature setting. When the set temperature is lower than the \"minimum temperature\", the valve is closed (forced closed). AUTO MODE ⏱ - In this mode, the device executes a preset week programming temperature time and temperature. ON - In this mode, the thermostat stays open OFF - In this mode, the thermostat stays closed", - "Auto MODE ⏱ - In this mode, the device executes a preset week programming temperature time and temperature. ": "Auto MODE ⏱ - In this mode, the device executes a preset week programming temperature time and temperature. ", + "Down movement limit": "Down movement limit", + "Up movement limit": "Up movement limit", + "Sustain time": "Sustain time", + "Reverse": "Reverse", + "Touch controll": "Touch controll", + "LED indicator mode": "LED indicator mode", + "Sum of produced energy": "Sum of produced energy", + "Direction of energy": "Direction of energy", + "Measured electrical potential value (phase X)": "Measured electrical potential value (phase X)", + "Measured electrical potential value (phase Y)": "Measured electrical potential value (phase Y)", + "Measured electrical potential value (phase Z)": "Measured electrical potential value (phase Z)", + "Instantaneous measured power (phase X)": "Instantaneous measured power (phase X)", + "Instantaneous measured power (phase Y)": "Instantaneous measured power (phase Y)", + "Instantaneous measured power (phase Z)": "Instantaneous measured power (phase Z)", + "Instantaneous measured electrical current (phase X)": "Instantaneous measured electrical current (phase X)", + "Instantaneous measured electrical current (phase Y)": "Instantaneous measured electrical current (phase Y)", + "Instantaneous measured electrical current (phase Z)": "Instantaneous measured electrical current (phase Z)", + "Total forward active energy": "Total forward active energy", + "Total reverse active energy": "Total reverse active energy", + "Calibration": "Calibration", + "Backlight": "Backlight", + "Motor Steering": "Motor Steering", + "Child Lock": "Child Lock", + "Reverse the motor, resets all endpoints! Also the upper border after hardware initialisation. Be careful!After this you have to turn off and turn on the roller so that it can drive into the uppest position.": "Reverse the motor, resets all endpoints! Also the upper border after hardware initialisation. Be careful!After this you have to turn off and turn on the roller so that it can drive into the uppest position.", + "Type of the switch": "Type of the switch", + "High temperature threshold": "High temperature threshold", + "High temperature breaker": "High temperature breaker", + "High power threshold": "High power threshold", + "High power breaker": "High power breaker", + "Over-current threshold": "Over-current threshold", + "Over-current breaker": "Over-current breaker", + "Over-voltage threshold": "Over-voltage threshold", + "Over-voltage breaker": "Over-voltage breaker", + "Under-voltage threshold": "Under-voltage threshold", + "Under-voltage breaker": "Under-voltage breaker", + "Max ON time in seconds": "Max ON time in seconds", + "Speed off the fan": "Speed off the fan", + "Error status": "Error status", + "State of the battery": "State of the battery", + "Max on time in minutes": "Max on time in minutes", + "Measured electrical potential value (phase A)": "Measured electrical potential value (phase A)", + "Measured electrical potential value (phase B)": "Measured electrical potential value (phase B)", + "Measured electrical potential value (phase C)": "Measured electrical potential value (phase C)", + "Instantaneous measured power (phase C)": "Instantaneous measured power (phase C)", + "Instantaneous measured electrical current (phase C)": "Instantaneous measured electrical current (phase C)", + "Sum of consumed energy (phase C)": "Sum of consumed energy (phase C)", + "Instantaneous measured power factor (phase C)": "Instantaneous measured power factor (phase C)", + "Minimum light brightness": "Minimum light brightness", + "Maximum light brightness": "Maximum light brightness", + "Type of light attached to the device": "Type of light attached to the device", + "Motion detection sensitivity": "Motion detection sensitivity", + "Motion detection distance": "Motion detection distance", + "State of the motion": "State of the motion", + "For how much time presence should stay true after detecting it": "For how much time presence should stay true after detecting it", + "Medium motion detection distance": "Medium motion detection distance", + "Medium motion detection sensitivity": "Medium motion detection sensitivity", + "LED Indicator": "LED Indicator", + "Small detection distance": "Small detection distance", + "Small detection sensitivity": "Small detection sensitivity", + "PIR sensor sensitivity (refresh and update only while active)": "PIR sensor sensitivity (refresh and update only while active)", + "PIR keep time in seconds (refresh and update only while active)": "PIR keep time in seconds (refresh and update only while active)", + "Brightness acquisition interval (refresh and update only while active)": "Brightness acquisition interval (refresh and update only while active)", + "Measured gas concentration": "Measured gas concentration", + "Temperature unit": "Temperature unit", + "Temperature calibration": "Temperature calibration", + "Humidity calibration": "Humidity calibration", + "Shows the presence duration in minutes": "Shows the presence duration in minutes", + "Shows the duration of the absence in minutes": "Shows the duration of the absence in minutes", + "Turns the onboard LED on or off": "Turns the onboard LED on or off", + "Current display unit": "Current display unit", + "Turn on to learn new IR code": "Turn on to learn new IR code", + "The IR code learned by device": "The IR code learned by device", + "The IR code to send by device": "The IR code to send by device", + "Active power": "Active power", + "Cycle count": "Cycle count", + "Cycle time": "Cycle time", + "Setup or clear top limit": "Setup or clear top limit", + "Setup or clear bottom limit": "Setup or clear bottom limit", + "Favorite position of this cover": "Favorite position of this cover", + "Inverts the cover direction": "Inverts the cover direction", + "Operation mode: \"command\" - for group control, \"event\" - for clicks": "Operation mode: \"command\" - for group control, \"event\" - for clicks", + "Temperature Report interval": "Temperature Report interval", + "Temperature alarm status": "Temperature alarm status", + "Alarm temperature max": "Alarm temperature max", + "Alarm temperature min": "Alarm temperature min", + "Humidity alarm status": "Humidity alarm status", + "Alarm humidity max": "Alarm humidity max", + "Alarm humidity min": "Alarm humidity min", + "Motion state": "Motion state", + "Presence keep time": "Presence keep time", + "Large motion detection distance": "Large motion detection distance", + "Large motion detection sensitivity": "Large motion detection sensitivity", + "Small motion detection distance": "Small motion detection distance", + "Small motion detection sensitivity": "Small motion detection sensitivity", + "Static detection distance": "Static detection distance", + "Static detection sensitivity": "Static detection sensitivity", + "Alarm volume": "Alarm volume", + "Alarm time": "Alarm time", + "sensitivity of the radar": "sensitivity of the radar", + "Self_test, possible results: checking, check_success, check_failure, others, comm_fault, radar_fault.": "Self_test, possible results: checking, check_success, check_failure, others, comm_fault, radar_fault.", + "Brightness state": "Brightness state", + "Meter number": "Meter number", + "State": "State", + "Alarm text": "Alarm text", + "Trip": "Trip", + "Child lock": "Child lock", + "Power on behavior": "Power on behavior", + "Countdown timer": "Countdown timer", + "Voltage RMS": "Voltage RMS", + "Current": "Current", + "Current average": "Current average", + "Instantaneous measured power on phase 1": "Instantaneous measured power on phase 1", + "Instantaneous measured power on phase 2": "Instantaneous measured power on phase 2", + "Instantaneous measured power on phase 3": "Instantaneous measured power on phase 3", + "Consumed energy": "Consumed energy", + "Clear device data": "Clear device data", + "Speed of movement": "Speed of movement", + "direction of movement from the point of view of the radar": "direction of movement from the point of view of the radar", + "Tumble status switch": "Tumble status switch", + "Fall sensitivity of the radar": "Fall sensitivity of the radar", + "Tumble alarm time": "Tumble alarm time", + "Fall down status": "Fall down status", + "Static dwell alarm": "Static dwell alarm", + "O-Sensitivity mode": "O-Sensitivity mode", + "V-Sensitivity mode": "V-Sensitivity mode", + "Led status switch": "Led status switch", + "Vacancy delay": "Vacancy delay", + "Light-On luminance prefer": "Light-On luminance prefer", + "Light-Off luminance prefer": "Light-Off luminance prefer", + "Luminance level": "Luminance level", + "Reference luminance": "Reference luminance", + "Vacant confirm time": "Vacant confirm time", + "Alarm humidity status": "Alarm humidity status", + "Alarm temperature status": "Alarm temperature status", + "Trigger the door movement": "Trigger the door movement", + "Indicates if the garage door contact is closed (= true) or open (= false)": "Indicates if the garage door contact is closed (= true) or open (= false)", + "Relay LED indicator mode": "Relay LED indicator mode", + "Antifreeze function": "Antifreeze function", + "Maximum upper temperature": "Maximum upper temperature", + "There are 8 periods in the schedule in total. 6 for workdays and 2 for holidays. It should be set in the following format for each of the periods: `hours:minutes/temperature`. All periods should be set at once and delimited by the space symbol. For example: `06:00/20.5 08:00/15 11:30/15 13:30/15 17:00/22 22:00/15 06:00/20 22:00/15`. The thermostat doesn't report the schedule by itself even if you change it manually from device": "There are 8 periods in the schedule in total. 6 for workdays and 2 for holidays. It should be set in the following format for each of the periods: `hours:minutes/temperature`. All periods should be set at once and delimited by the space symbol. For example: `06:00/20.5 08:00/15 11:30/15 13:30/15 17:00/22 22:00/15 06:00/20 22:00/15`. The thermostat doesn't report the schedule by itself even if you change it manually from device", + "Week format user for schedule": "Week format user for schedule", + "Screen brightness": "Screen brightness", + "Switches beep sound when interacting with thermostat": "Switches beep sound when interacting with thermostat", + "Resets all settings to default. Doesn't unpair device.": "Resets all settings to default. Doesn't unpair device.", + "Heating temperature limit": "Heating temperature limit", + "Intensity of the backlight": "Intensity of the backlight", + "Fault status of the device (clear = nothing)": "Fault status of the device (clear = nothing)", + "State of threshold_1": "State of threshold_1", + "OFF - alarm only, ON - relay will be off when threshold reached": "OFF - alarm only, ON - relay will be off when threshold reached", + "Can be in Volt or Ampere depending on threshold setting. Setup the value on the device": "Can be in Volt or Ampere depending on threshold setting. Setup the value on the device", + "State of threshold_2": "State of threshold_2", + "Setup value on the device": "Setup value on the device", + "Turn ON to clear last the fault": "Turn ON to clear last the fault", + "Meter ID (ID of device)": "Meter ID (ID of device)", + "Instantaneous measured power factor": "Instantaneous measured power factor", + "Enable the alarm": "Enable the alarm", + "Silence the siren": "Silence the siren", + "Indicates whether a fault was detected": "Indicates whether a fault was detected", + "Silence the alarm": "Silence the alarm", + "Indicates whether the device is being self-tested": "Indicates whether the device is being self-tested", + "Parts per million of smoke detected": "Parts per million of smoke detected", + "Indicates whether the device is being tested": "Indicates whether the device is being tested", + "Indicates a fault with the device": "Indicates a fault with the device", + "Position": "Position", + "Window status closed or open ": "Window status closed or open ", + "Thermostat in error state": "Thermostat in error state", + "MANUAL MODE ☝ - In this mode, the device executes manual temperature setting. When the set temperature is lower than the \"minimum temperature\", the valve is closed (forced closed). AUTO MODE ⏱ - In this mode, the device executes a preset week programming temperature time and temperature. ON - In this mode, the thermostat stays open OFF - In this mode, the thermostat stays closed": "MANUAL MODE ☝ - In this mode, the device executes manual temperature setting. When the set temperature is lower than the \"minimum temperature\", the valve is closed (forced closed). AUTO MODE ⏱ - In this mode, the device executes a preset week programming temperature time and temperature. ON - In this mode, the thermostat stays open OFF - In this mode, the thermostat stays closed", + "Schedule for monday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"": "Schedule for monday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"", + "Schedule for tuesday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"": "Schedule for tuesday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"", + "Schedule for wednesday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"": "Schedule for wednesday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"", + "Schedule for thursday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"": "Schedule for thursday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"", + "Schedule for friday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"": "Schedule for friday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"", + "Schedule for saturday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"": "Schedule for saturday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"", + "Schedule for sunday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"": "Schedule for sunday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"", + "Boost Heating: press and hold \"+\" for 3 seconds, the device will enter the boost heating mode, and the ▷╵◁ will flash. The countdown will be displayed in the APP": "Boost Heating: press and hold \"+\" for 3 seconds, the device will enter the boost heating mode, and the ▷╵◁ will flash. The countdown will be displayed in the APP", + "Countdown in minutes": "Countdown in minutes", + "Enable/disable away mode": "Enable/disable away mode", + "If the heat sink is not fully opened within two weeks or is not used for a long time, the valve will be blocked due to silting up and the heat sink will not be able to be used. To ensure normal use of the heat sink, the controller will automatically open the valve fully every two weeks. It will run for 30 seconds per time with the screen displaying \"Ad\", then return to its normal working state again.": "If the heat sink is not fully opened within two weeks or is not used for a long time, the valve will be blocked due to silting up and the heat sink will not be able to be used. To ensure normal use of the heat sink, the controller will automatically open the valve fully every two weeks. It will run for 30 seconds per time with the screen displaying \"Ad\", then return to its normal working state again.", + "When the room temperature is lower than 5 °C, the valve opens; when the temperature rises to 8 °C, the valve closes.": "When the room temperature is lower than 5 °C, the valve opens; when the temperature rises to 8 °C, the valve closes.", + "If NTC is damaged, \"Er\" will be on the TRV display.": "If NTC is damaged, \"Er\" will be on the TRV display.", "Enables/disables the status on the device": "Enables/disables the status on the device", + "When Anti-Freezing function is activated, the temperature in the house is kept at 8 °C.": "When Anti-Freezing function is activated, the temperature in the house is kept at 8 °C.", "Open window temperature": "Open window temperature", + "Comfort temperature": "Comfort temperature", + "Eco temperature": "Eco temperature", + "Only for Homeassistant": "Only for Homeassistant", + "Battery life can be prolonged by switching the heating off. To achieve this, the valve is closed fully. To activate the heating stop, the device display \"HS\", press the pair button to cancel.": "Battery life can be prolonged by switching the heating off. To achieve this, the valve is closed fully. To activate the heating stop, the device display \"HS\", press the pair button to cancel.", + "When Anti-Freezing function is activated, the temperature in the house is kept at 8 °C.When Anti-Freezing function is activated, the temperature in the house is kept at 8 °C, the device display \"AF\".press the pair button to cancel.": "When Anti-Freezing function is activated, the temperature in the house is kept at 8 °C.When Anti-Freezing function is activated, the temperature in the house is kept at 8 °C, the device display \"AF\".press the pair button to cancel.", + "Setting minimum 0 - maximum 465 seconds boost time. The boost (♨) function is activated. The remaining time for the function will be counted down in seconds ( 465 to 0 ).": "Setting minimum 0 - maximum 465 seconds boost time. The boost (♨) function is activated. The remaining time for the function will be counted down in seconds ( 465 to 0 ).", "Holiday temperature": "Holiday temperature", - "Setting minimum 0 - maximum 465 seconds boost time. The boost (♨) function is activated. The remaining time for the function will be counted down in seconds ( 465 to 0 ).": "Setting minimum 0 - maximum 465 seconds boost time. The boost (♨) function is activated. The remaining time for the function will be counted down in seconds ( 465 to 0 ).", - "Is the device online": "Is the device online", - "The holiday mode( ⛱ ) will automatically start at the set time starting point and run the holiday temperature.": "The holiday mode( ⛱ ) will automatically start at the set time starting point and run the holiday temperature.", - "Auto Mode ⏱ - In this mode, the device executes a preset week programming temperature time and temperature. ": "Auto Mode ⏱ - In this mode, the device executes a preset week programming temperature time and temperature. ", - "Error status": "Error status", - "The measured CO2 (carbon dioxide) value": "The measured CO2 (carbon dioxide) value", + "The holiday mode will automatically start at the set time starting point and run the holiday temperature. Can be defined in the following format: `startYear/startMonth/startDay startHours:startMinutes | endYear/endMonth/endDay endHours:endMinutes`. For example: `2022/10/01 16:30 | 2022/10/21 18:10`. After the end of holiday mode, it switches to \"auto\" mode and uses schedule.": "The holiday mode will automatically start at the set time starting point and run the holiday temperature. Can be defined in the following format: `startYear/startMonth/startDay startHours:startMinutes | endYear/endMonth/endDay endHours:endMinutes`. For example: `2022/10/01 16:30 | 2022/10/21 18:10`. After the end of holiday mode, it switches to \"auto\" mode and uses schedule.", + "`mon_sun` - schedule for Monday used for each day (define it only for Monday). `mon_fri+sat+sun` - schedule for workdays used from Monday (define it only for Monday), Saturday and Sunday are defined separately. `separate` - schedule for each day is defined separately.": "`mon_sun` - schedule for Monday used for each day (define it only for Monday). `mon_fri+sat+sun` - schedule for workdays used from Monday (define it only for Monday), Saturday and Sunday are defined separately. `separate` - schedule for each day is defined separately.", + "Schedule will work with \"auto\" preset. In this mode, the device executes a preset week programming temperature time and temperature. Before using these properties, check `working_day` property. Each day can contain up to 10 segments. At least 1 segment should be defined. Different count of segments can be defined for each day, e.g., 3 segments for Monday, 5 segments for Thursday, etc. It should be defined in the following format: `hours:minutes/temperature`. Minutes can be only tens, i.e., 00, 10, 20, 30, 40, 50. Segments should be divided by space symbol. Each day should end with the last segment of 24:00. Examples: `04:00/20 08:30/22 10:10/18 18:40/24 22:50/19.5`; `06:00/21.5 17:20/26 24:00/18`. The temperature will be set from the beginning/start of one period and until the next period, e.g., `04:00/20 24:00/22` means that from 00:00 to 04:00 temperature will be 20 degrees and from 04:00 to 00:00 temperature will be 22 degrees.": "Schedule will work with \"auto\" preset. In this mode, the device executes a preset week programming temperature time and temperature. Before using these properties, check `working_day` property. Each day can contain up to 10 segments. At least 1 segment should be defined. Different count of segments can be defined for each day, e.g., 3 segments for Monday, 5 segments for Thursday, etc. It should be defined in the following format: `hours:minutes/temperature`. Minutes can be only tens, i.e., 00, 10, 20, 30, 40, 50. Segments should be divided by space symbol. Each day should end with the last segment of 24:00. Examples: `04:00/20 08:30/22 10:10/18 18:40/24 22:50/19.5`; `06:00/21.5 17:20/26 24:00/18`. The temperature will be set from the beginning/start of one period and until the next period, e.g., `04:00/20 24:00/22` means that from 00:00 to 04:00 temperature will be 20 degrees and from 04:00 to 00:00 temperature will be 22 degrees.", + "Schedule for monday, format: \"HH:MM/C\"": "Schedule for monday, format: \"HH:MM/C\"", + "Schedule for tuesday, format: \"HH:MM/C\"": "Schedule for tuesday, format: \"HH:MM/C\"", + "Schedule for wednesday, format: \"HH:MM/C\"": "Schedule for wednesday, format: \"HH:MM/C\"", + "Schedule for thursday, format: \"HH:MM/C\"": "Schedule for thursday, format: \"HH:MM/C\"", + "Schedule for friday, format: \"HH:MM/C\"": "Schedule for friday, format: \"HH:MM/C\"", + "Schedule for saturday, format: \"HH:MM/C\"": "Schedule for saturday, format: \"HH:MM/C\"", + "Schedule for sunday, format: \"HH:MM/C\"": "Schedule for sunday, format: \"HH:MM/C\"", + "The current data request from the device.": "The current data request from the device.", + "Set the motor direction": "Set the motor direction", + "Opening mode": "Opening mode", + "Set the upper limit, to reset limits use factory_reset": "Set the upper limit, to reset limits use factory_reset", + "Set the bottom limit, to reset limits use factory_reset": "Set the bottom limit, to reset limits use factory_reset", + "Factory reset the device": "Factory reset the device", + "Reverse the motor direction": "Reverse the motor direction", + "Single motor steps": "Single motor steps", + "Window open?": "Window open?", + "Mode of this device, in the `heat` mode the TS0601 will remain continuously heating, i.e. it does not regulate to the desired temperature. If you want TRV to properly regulate the temperature you need to use mode `auto` instead setting the desired temperature.": "Mode of this device, in the `heat` mode the TS0601 will remain continuously heating, i.e. it does not regulate to the desired temperature. If you want TRV to properly regulate the temperature you need to use mode `auto` instead setting the desired temperature.", + "Enable/disable auto lock": "Enable/disable auto lock", + "Away preset days": "Away preset days", + "Boost time": "Boost time", + "Force the valve position": "Force the valve position", + "Schedule MODE ⏱ - In this mode, the device executes a preset week programming temperature time and temperature.": "Schedule MODE ⏱ - In this mode, the device executes a preset week programming temperature time and temperature.", + "Motor side": "Motor side", + "Learning": "Learning", + "Remove limits": "Remove limits", + "Calibration time": "Calibration time", + "Mode of the indicator light": "Mode of the indicator light", + "Measured soil moisture value": "Measured soil moisture value", + "PIR sensor sensitivity": "PIR sensor sensitivity", + "PIR keep time in seconds": "PIR keep time in seconds", + "Result of the self-test": "Result of the self-test", + "Indicates sensor preheat is active": "Indicates sensor preheat is active", + "Indicates if CO (carbon monoxide) is detected": "Indicates if CO (carbon monoxide) is detected", + "The measured CO (carbon monoxide) value": "The measured CO (carbon monoxide) value", "The measured formaldehyd value": "The measured formaldehyd value", - "Mode of the warning (sound effect)": "Mode of the warning (sound effect)", - "Sound level": "Sound level", - "Intensity of the strobe": "Intensity of the strobe", - "Turn on/off the strobe (light) during warning": "Turn on/off the strobe (light) during warning", - "Length of the flash cycle": "Length of the flash cycle", - "Duration in seconds of the alarm": "Duration in seconds of the alarm", - "Indicates if the device is moving": "Indicates if the device is moving", + "Group where the action was triggered on": "Group where the action was triggered on", "Accelerometer X value": "Accelerometer X value", "Accelerometer Y value": "Accelerometer Y value", "Accelerometer Z value": "Accelerometer Z value", + "Configure genLevelCtrl": "Configure genLevelCtrl", + "Represents the time taken to move to or from the target level when On of Off commands are received by an On/Off cluster": "Represents the time taken to move to or from the target level when On of Off commands are received by an On/Off cluster", + "Represents the time taken to move the current level from the minimum level to the maximum level when an On command is received": "Represents the time taken to move the current level from the minimum level to the maximum level when an On command is received", + "Represents the time taken to move the current level from the maximum level to the minimum level when an Off command is received": "Represents the time taken to move the current level from the maximum level to the minimum level when an Off command is received", + "Defines the desired startup level for a device when it is supplied with power": "Defines the desired startup level for a device when it is supplied with power", + "Current temperature measured from the floor sensor": "Current temperature measured from the floor sensor", + "OLED brightness when operating the buttons. Default: Medium.": "OLED brightness when operating the buttons. Default: Medium.", + "Key beep volume and vibration level. Default: Low.": "Key beep volume and vibration level. Default: Low.", + "Type of the external floor sensor. Default: NTC 10K/25.": "Type of the external floor sensor. Default: NTC 10K/25.", + "The sensor used for heat control. Default: Room Sensor.": "The sensor used for heat control. Default: Room Sensor.", + "The mode after a power reset. Default: Previous Mode.": "The mode after a power reset. Default: Previous Mode.", + "The tempearatue calibration for the external floor sensor, between -3 and 3 in 0.1°C. Default: 0.": "The tempearatue calibration for the external floor sensor, between -3 and 3 in 0.1°C. Default: 0.", + "The duration of Dry Mode, between 5 and 100 minutes. Default: 5.": "The duration of Dry Mode, between 5 and 100 minutes. Default: 5.", + "The mode after Dry Mode. Default: Auto.": "The mode after Dry Mode. Default: Auto.", + "The temperature on the display. Default: Room Temperature.": "The temperature on the display. Default: Room Temperature.", + "The threshold to detect window open, between 0.0 and 8.0 in 0.5 °C. Default: 0 (disabled).": "The threshold to detect window open, between 0.0 and 8.0 in 0.5 °C. Default: 0 (disabled).", + "Hysteresis setting, between 0.5 and 2 in 0.1 °C. Default: 0.5.": "Hysteresis setting, between 0.5 and 2 in 0.1 °C. Default: 0.5.", + "Room temperature alarm threshold, between 20 and 60 in °C. 0 means disabled. Default: 45.": "Room temperature alarm threshold, between 20 and 60 in °C. 0 means disabled. Default: 45.", + "The measured occupancy value": "The measured occupancy value", + "The measured noise value": "The measured noise value", + "Indicates whether the device detected noise": "Indicates whether the device detected noise", + "Time in seconds after which noise is cleared after detecting it (default: 60)": "Time in seconds after which noise is cleared after detecting it (default: 60)", + "Time in seconds after which occupancy is cleared after detecting it (default: 60)": "Time in seconds after which occupancy is cleared after detecting it (default: 60)", + "Self-heating compensation. The compensation value is subtracted from the measured temperature (default: 0)": "Self-heating compensation. The compensation value is subtracted from the measured temperature (default: 0)", + "If the sensor is triggered by the slightest movement, reduce the sensitivity, otherwise increase it (default: 50)": "If the sensor is triggered by the slightest movement, reduce the sensitivity, otherwise increase it (default: 50)", + "The minimum noise level at which the detector will work (default: 50)": "The minimum noise level at which the detector will work (default: 50)", + "Self-heating compensation. The compensation value is subtracted from the measured temperature": "Self-heating compensation. The compensation value is subtracted from the measured temperature", + "Automatic calibration of the CO2 sensor. If ON, the CO2 sensor will automatically calibrate every 7 days. (MH-Z19B sensor)": "Automatic calibration of the CO2 sensor. If ON, the CO2 sensor will automatically calibrate every 7 days. (MH-Z19B sensor)", + "Ventilate the room for 20 minutes, turn on manual calibration, and turn it off after one second. After about 5 minutes the CO2 sensor will show 400ppm. Calibration completed. (MH-Z19B sensor)": "Ventilate the room for 20 minutes, turn on manual calibration, and turn it off after one second. After about 5 minutes the CO2 sensor will show 400ppm. Calibration completed. (MH-Z19B sensor)", + "Turn on when working in conditions of high humidity (more than 70 %, RH) or condensation, if the sensor shows 0 or 100 %.": "Turn on when working in conditions of high humidity (more than 70 %, RH) or condensation, if the sensor shows 0 or 100 %.", + "Mode of the thermostat": "Mode of the thermostat", + "Brightness of the indicator light": "Brightness of the indicator light", + "Indicates if the device is moving": "Indicates if the device is moving", "Trigger beep for x seconds": "Trigger beep for x seconds", - "Control status LED when load ON": "Control status LED when load ON", + "White brightness of this light": "White brightness of this light", + "TRV valve position in %.": "TRV valve position in %.", + "Percent volume remaining in tank": "Percent volume remaining in tank", + "Temperature at which water heating will resume automatically (default: 45°C)": "Temperature at which water heating will resume automatically (default: 45°C)", + "Valve state if open or closed": "Valve state if open or closed", + "Position of the valve": "Position of the valve", + "Automatically turn off load after x seconds": "Automatically turn off load after x seconds", + "Control status LED intensity when load ON": "Control status LED intensity when load ON", "Control status LED when load OFF": "Control status LED when load OFF", "Control minimum dimmer brightness": "Control minimum dimmer brightness", + "Control status LED color when load ON": "Control status LED color when load ON", + "Control status LED color when load OFF": "Control status LED color when load OFF", + "Control status LED intensity when load OFF": "Control status LED intensity when load OFF", + "Enables or disables the device’s buttons": "Enables or disables the device’s buttons", + "Load connected in watt": "Load connected in watt", + "Occupancy state of the thermostat": "Occupancy state of the thermostat", + "Displays the outdoor temperature and then returns to the set point in \"auto\" mode, or clears in \"outdoor temp\" mode when expired.": "Displays the outdoor temperature and then returns to the set point in \"auto\" mode, or clears in \"outdoor temp\" mode when expired.", + "Outdoor temperature for the secondary display": "Outdoor temperature for the secondary display", + "Time in seconds after which the outdoor temperature is considered to have expired": "Time in seconds after which the outdoor temperature is considered to have expired", + "DEPRECATED: Use second_display_mode or control via outdoor_temperature_timeout": "DEPRECATED: Use second_display_mode or control via outdoor_temperature_timeout", + "The temperature format displayed on the thermostat screen": "The temperature format displayed on the thermostat screen", + "The time format featured on the thermostat display": "The time format featured on the thermostat display", "Control backlight dimming behavior": "Control backlight dimming behavior", + "Maximum Heating set point limit": "Maximum Heating set point limit", + "Minimum Heating set point limit": "Minimum Heating set point limit", + "The display backlight behavior": "The display backlight behavior", + "The power in watts of the electrical load connected to the device": "The power in watts of the electrical load connected to the device", + "Control mode using floor or ambient temperature": "Control mode using floor or ambient temperature", + "The maximum floor temperature limit of the floor when in ambient control mode": "The maximum floor temperature limit of the floor when in ambient control mode", + "The minimum floor temperature limit of the floor when in ambient control mode": "The minimum floor temperature limit of the floor when in ambient control mode", + "The maximum ambient temperature limit when in floor control mode": "The maximum ambient temperature limit when in floor control mode", + "The floor sensor": "The floor sensor", + "The length of the control cycle according to the type of load connected to the thermostats": "The length of the control cycle according to the type of load connected to the thermostats", + "The length of the control cycle according to the type of auxiliary load connected to the thermostats": "The length of the control cycle according to the type of auxiliary load connected to the thermostats", + "This function prevents the seizure of the pump": "This function prevents the seizure of the pump", + "The power in watts of the heater connected to the auxiliary output of the thermostat": "The power in watts of the heater connected to the auxiliary output of the thermostat", + "The length of the control cycle: 15_sec=normal 15_min=fan": "The length of the control cycle: 15_sec=normal 15_min=fan", + "Operation mode: \"auto\" - toggle by S/W, \"push\" - for momentary S/W, \"latch\" - sync S/W": "Operation mode: \"auto\" - toggle by S/W, \"push\" - for momentary S/W, \"latch\" - sync S/W", + "Enable RF pairing mode each button l1, l2, l3": "Enable RF pairing mode each button l1, l2, l3", + "Indicates whether \"IN\" Sensor of the device detected occupancy": "Indicates whether \"IN\" Sensor of the device detected occupancy", + "Indicates whether \"OUT\" Sensor of the device detected occupancy": "Indicates whether \"OUT\" Sensor of the device detected occupancy", + "Indicates whether \"IN or OUT\" Sensor of the device detected occupancy": "Indicates whether \"IN or OUT\" Sensor of the device detected occupancy", + "Indicates whether \"IN and OUT\" Sensor of the device detected occupancy": "Indicates whether \"IN and OUT\" Sensor of the device detected occupancy", + "Door status": "Door status", + "User ID can only number 1": "User ID can only number 1", + "Pincode to set, set pincode(4 digit) to null to clear": "Pincode to set, set pincode(4 digit) to null to clear", + "temperature of device internal mcu": "temperature of device internal mcu", + "Measured electrical power factor": "Measured electrical power factor", + "Measured electrical ac frequency": "Measured electrical ac frequency", + "Currently status": "Currently status", "People count": "People count", - "Icon shown on device displays": "Icon shown on device displays", - "Calibrates valve on next wakeup": "Calibrates valve on next wakeup", + "Run RF pairing mode": "Run RF pairing mode", + "Counting Freeze ON/OFF, not reporting people value when is ON": "Counting Freeze ON/OFF, not reporting people value when is ON", + "ToF sensor initial": "ToF sensor initial", + "Indicate LED enable/disable, default : enable": "Indicate LED enable/disable, default : enable", + "RF function enable/disable, default : disable": "RF function enable/disable, default : disable", + "Transaction interval, default : 400ms": "Transaction interval, default : 400ms", + "Fast process enable/disable when people 0 to 1. default : enable": "Fast process enable/disable when people 0 to 1. default : enable", + "Fast process enable/disable when people 1 to 0. default : enable": "Fast process enable/disable when people 1 to 0. default : enable", "Controls piloting mode": "Controls piloting mode", - "Controls Capacitive or Inductive Dimming Mode": "Controls Capacitive or Inductive Dimming Mode", - "Auto off after specific time": "Auto off after specific time", - "Auto off timer time left": "Auto off timer time left", - "Time the valve was open when state on": "Time the valve was open when state on", - "Liters of water consumed": "Liters of water consumed", - "Is the unit in mounting mode. This is set to `false` for mounted (already on the radiator) or `true` for not mounted (after factory reset)": "Is the unit in mounting mode. This is set to `false` for mounted (already on the radiator) or `true` for not mounted (after factory reset)", - "Set the unit mounting mode. `false` Go to Mounted Mode or `true` Go to Mounting Mode": "Set the unit mounting mode. `false` Go to Mounted Mode or `true` Go to Mounting Mode", - "Thermostat Orientation. This is important for the PID in how it assesses temperature. `false` Horizontal or `true` Vertical": "Thermostat Orientation. This is important for the PID in how it assesses temperature. `false` Horizontal or `true` Vertical", - "Viewing/Display Direction. `false` Horizontal or `true` Vertical": "Viewing/Display Direction. `false` Horizontal or `true` Vertical", - "Whether or not the unit needs warm water. `false` No Heat Request or `true` Heat Request": "Whether or not the unit needs warm water. `false` No Heat Request or `true` Heat Request", - "Values observed are `0` (manual), `1` (schedule) or `2` (externally)": "Values observed are `0` (manual), `1` (schedule) or `2` (externally)", - "0=Quarantine, 1=Windows are closed, 2=Hold - Windows are maybe about to open, 3=Open window detected, 4=In window open state from external but detected closed locally": "0=Quarantine, 1=Windows are closed, 2=Hold - Windows are maybe about to open, 3=Open window detected, 4=In window open state from external but detected closed locally", - "Set if the window is open or close. This setting will trigger a change in the internal window and heating demand. `false` (windows are closed) or `true` (windows are open)": "Set if the window is open or close. This setting will trigger a change in the internal window and heating demand. `false` (windows are closed) or `true` (windows are open)", - "Exercise day of week: 0=Sun...6=Sat, 7=undefined": "Exercise day of week: 0=Sun...6=Sat, 7=undefined", - "Exercise trigger time. Minutes since midnight (65535=undefined). Range 0 to 1439": "Exercise trigger time. Minutes since midnight (65535=undefined). Range 0 to 1439", - "Scale factor of setpoint filter timeconstant (\"aggressiveness\" of control algorithm) 1= Quick ... 5=Moderate ... 10=Slow": "Scale factor of setpoint filter timeconstant (\"aggressiveness\" of control algorithm) 1= Quick ... 5=Moderate ... 10=Slow", - "Whether or not the thermostat acts as standalone thermostat or shares load with other thermostats in the room. The gateway must update load_room_mean if enabled.": "Whether or not the thermostat acts as standalone thermostat or shares load with other thermostats in the room. The gateway must update load_room_mean if enabled.", - "Load estimate on this radiator": "Load estimate on this radiator", - "Blink green LED on motion detection": "Blink green LED on motion detection", - "Ac louver position of this device": "Ac louver position of this device", + "Instantaneous measured apparent power": "Instantaneous measured apparent power", + "Instantaneous measured power on phase A": "Instantaneous measured power on phase A", + "Instantaneous measured power on phase B": "Instantaneous measured power on phase B", + "Instantaneous measured power on phase C": "Instantaneous measured power on phase C", + "Sum of consumed energy on phase A": "Sum of consumed energy on phase A", + "Sum of consumed energy on phase B": "Sum of consumed energy on phase B", + "Sum of consumed energy on phase C": "Sum of consumed energy on phase C", + "Measured electrical potential value on phase A": "Measured electrical potential value on phase A", + "Measured electrical potential value on phase B": "Measured electrical potential value on phase B", + "Measured electrical potential value on phase C": "Measured electrical potential value on phase C", + "Measured electrical potential value between phase A and B": "Measured electrical potential value between phase A and B", + "Measured electrical potential value between phase B and C": "Measured electrical potential value between phase B and C", + "Measured electrical potential value between phase C and A": "Measured electrical potential value between phase C and A", + "Instantaneous measured electrical current on phase A": "Instantaneous measured electrical current on phase A", + "Instantaneous measured electrical current on phase B": "Instantaneous measured electrical current on phase B", + "Instantaneous measured electrical current on phase C": "Instantaneous measured electrical current on phase C", + "Time in seconds after which occupancy is cleared after detecting it": "Time in seconds after which occupancy is cleared after detecting it", + "Controls the behaviour when the device is powered on": "Controls the behaviour when the device is powered on", + "Flash green tag for x seconds": "Flash green tag for x seconds", + "Input (command) and output (control) behavior of actuator": "Input (command) and output (control) behavior of actuator", + "Output signal when operating in fil pilote mode (fip_fip)": "Output signal when operating in fil pilote mode (fip_fip)", + "Icon shown on device displays": "Icon shown on device displays", + "Calibrates valve on next wakeup": "Calibrates valve on next wakeup", + "Controls Capacitive or Inductive Dimming Mode": "Controls Capacitive or Inductive Dimming Mode", + "Sets dimming mode to autodetect or fixed RC/RL/RL_LED mode (max load is reduced in RL_LED)": "Sets dimming mode to autodetect or fixed RC/RL/RL_LED mode (max load is reduced in RL_LED)", + "Duration of lift": "Duration of lift", + "Led Indicator Mode": "Led Indicator Mode", + "Device valve is open or closed (heating or not)": "Device valve is open or closed (heating or not)", + "Auto off after specific time": "Auto off after specific time", + "Auto off timer time left": "Auto off timer time left", + "Time the valve was open when state on": "Time the valve was open when state on", + "Liters of water consumed": "Liters of water consumed", + "Format 08:00 / 20:00 / 15 / 60 / MoTuWeThFrSaSu / 1 (08:00 = start time 20:00 = end time 15 = irrigation duration in minutes 60 = pause duration in minutes MoTu..= active weekdays 1 = deactivate timer with 0)": "Format 08:00 / 20:00 / 15 / 60 / MoTuWeThFrSaSu / 1 (08:00 = start time 20:00 = end time 15 = irrigation duration in minutes 60 = pause duration in minutes MoTu..= active weekdays 1 = deactivate timer with 0)", + "Format 08:00 / 15 / MoTuWeThFrSaSu / 1 (08:00 = start time 15 = duration in minutes MoTu..= active weekdays 1 = deactivate timer with 0)": "Format 08:00 / 15 / MoTuWeThFrSaSu / 1 (08:00 = start time 15 = duration in minutes MoTu..= active weekdays 1 = deactivate timer with 0)", + "Current water flow in %.": "Current water flow in %.", + "Last watering duration in seconds.": "Last watering duration in seconds.", + "Remaning watering time (for auto shutdown). Updates every minute, and every 10s in the last minute.": "Remaning watering time (for auto shutdown). Updates every minute, and every 10s in the last minute.", + "Set valve to %.": "Set valve to %.", + "Auto shutdown in seconds.": "Auto shutdown in seconds.", + "Set valve to % with auto shutdown.": "Set valve to % with auto shutdown.", + "Directly control the radiator valve. The values range from 0 (valve closed) to 100 (valve fully open)": "Directly control the radiator valve. The values range from 0 (valve closed) to 100 (valve fully open)", + "How hard the motor pushes the valve. The closer to the boiler, the higher the force needed": "How hard the motor pushes the valve. The closer to the boiler, the higher the force needed", + "Transmits with higher power when range is not sufficient": "Transmits with higher power when range is not sufficient", + "List of RGB HEX colors": "List of RGB HEX colors", + "Blink green LED on motion detection": "Blink green LED on motion detection", + "RMS voltage": "RMS voltage", + "Indicates if the alarm is triggered on the voltage drop below the limit, allows to reset alarms": "Indicates if the alarm is triggered on the voltage drop below the limit, allows to reset alarms", + "Indicates if the alarm is triggered on the voltage rise above the limit, allows to reset alarms": "Indicates if the alarm is triggered on the voltage rise above the limit, allows to reset alarms", + "Indicates if the alarm is triggered on the active power rise above the limit, allows to reset alarms": "Indicates if the alarm is triggered on the active power rise above the limit, allows to reset alarms", + "Indicates if the alarm is triggered when the consumption energy limit is reached, allows to reset alarms": "Indicates if the alarm is triggered when the consumption energy limit is reached, allows to reset alarms", + "Minimum allowable voltage limit for alarms.": "Minimum allowable voltage limit for alarms.", + "Maximum allowable voltage limit for alarms.": "Maximum allowable voltage limit for alarms.", + "Maximum allowable power limit for alarms.": "Maximum allowable power limit for alarms.", + "Limit of electric energy consumption in kW*h. 0 value represents no limit": "Limit of electric energy consumption in kW*h. 0 value represents no limit", + "RSSI seen by the device": "RSSI seen by the device", + "LQI seen by the device": "LQI seen by the device", "On/off state of this fan": "On/off state of this fan", "Mode of this fan": "Mode of this fan", - "Sound volume of the lock": "Sound volume of the lock", + "Controls how programming affects the thermostat. Possible values: setpoint (only use specified setpoint), schedule (follow programmed setpoint schedule), schedule_with_preheat (follow programmed setpoint schedule with pre-heating). Changing this value does not clear programmed schedules.": "Controls how programming affects the thermostat. Possible values: setpoint (only use specified setpoint), schedule (follow programmed setpoint schedule), schedule_with_preheat (follow programmed setpoint schedule with pre-heating). Changing this value does not clear programmed schedules.", + "Maximum Cooling set point limit": "Maximum Cooling set point limit", + "Minimum Cooling point limit": "Minimum Cooling point limit", + "Phase 1 voltage": "Phase 1 voltage", + "Phase 2 voltage": "Phase 2 voltage", + "Phase 3 voltage": "Phase 3 voltage", + "Phase 1 current": "Phase 1 current", + "Phase 2 current": "Phase 2 current", + "Phase 3 current": "Phase 3 current", + "Phase 1 energy": "Phase 1 energy", + "Phase 2 energy": "Phase 2 energy", + "Phase 3 energy": "Phase 3 energy", + "Phase 1 reactive energy": "Phase 1 reactive energy", + "Phase 2 reactive energy": "Phase 2 reactive energy", + "Phase 3 reactive energy": "Phase 3 reactive energy", + "Phase 1 power": "Phase 1 power", + "Phase 2 power": "Phase 2 power", + "Phase 3 power": "Phase 3 power", + "Phase 1 reactive power": "Phase 1 reactive power", + "Phase 2 reactive power": "Phase 2 reactive power", + "Phase 3 reactive power": "Phase 3 reactive power", + "AC louver position of this device": "AC louver position of this device", + "Last unlock source": "Last unlock source", + "Last unlock user": "Last unlock user", + "Last lock source": "Last lock source", + "Last lock user": "Last lock user", + "Last used pin code": "Last used pin code", "Auto relock after 7 seconds.": "Auto relock after 7 seconds.", - "Do not disturb mode": "Do not disturb mode", - "Power on behavior state": "Power on behavior state", + "Temperature sensitivity": "Temperature sensitivity", + "Humidity Report interval": "Humidity Report interval", + "Humidity sensitivity": "Humidity sensitivity", + "Enable LED": "Enable LED", + "LED State": "LED State", + "Alarm status": "Alarm status", + "Enable alarm": "Enable alarm", + "Enable tamper alarm": "Enable tamper alarm", + "Alarm sound effect": "Alarm sound effect", + "Alarm mode": "Alarm mode", + "Alarm duration in minutes": "Alarm duration in minutes", + "Charging status": "Charging status", + "Temperature/humidity alarm status": "Temperature/humidity alarm status", + "Temperature scale (°F/°C)": "Temperature scale (°F/°C)", + "Hysteresis setting, default: 0.5": "Hysteresis setting, default: 0.5", + "Adjust brightness of display values 1(Low)-7(High)": "Adjust brightness of display values 1(Low)-7(High)", + "Enable / Disable display auto off": "Enable / Disable display auto off", + "The mode after a power reset. Default: Previous Mode. See instructions for information about manual": "The mode after a power reset. Default: Previous Mode. See instructions for information about manual", + "Turn on/off window check mode": "Turn on/off window check mode", + "The threshold to detect window open, between 1.5 and 4 in 0.5 °C. Default: 0 (disabled).": "The threshold to detect window open, between 1.5 and 4 in 0.5 °C. Default: 0 (disabled).", + "Hysteresis setting, between 0.5 and 5 in 0.1 °C. Default: 0.5.": "Hysteresis setting, between 0.5 and 5 in 0.1 °C. Default: 0.5.", + "Floor temperature over heating threshold, range is 0-35, unit is 1ºC, 0 means this function is disabled, default value is 27.": "Floor temperature over heating threshold, range is 0-35, unit is 1ºC, 0 means this function is disabled, default value is 27.", + "ECO mode (energy saving mode)": "ECO mode (energy saving mode)", "MANUAL MODE ☝ - In this mode, the device executes manual temperature setting. When the set temperature is lower than the \"minimum temperature\", the valve is closed (forced closed). PROGRAMMING MODE ⏱ - In this mode, the device executes a preset week programming temperature time and temperature. HOLIDAY MODE ⛱ - In this mode, for example, the vacation mode is set for 10 days and the temperature is setto 15 degrees Celsius. After 10 days, the device will automatically switch to programming mode. TEMPORARY MANUAL MODE - In this mode, ☝ icon will flash. At this time, the device executes the manually set temperature and returns to the weekly programming mode in the next time period. ": "MANUAL MODE ☝ - In this mode, the device executes manual temperature setting. When the set temperature is lower than the \"minimum temperature\", the valve is closed (forced closed). PROGRAMMING MODE ⏱ - In this mode, the device executes a preset week programming temperature time and temperature. HOLIDAY MODE ⛱ - In this mode, for example, the vacation mode is set for 10 days and the temperature is setto 15 degrees Celsius. After 10 days, the device will automatically switch to programming mode. TEMPORARY MANUAL MODE - In this mode, ☝ icon will flash. At this time, the device executes the manually set temperature and returns to the weekly programming mode in the next time period. ", "PROGRAMMING MODE ⏱ - In this mode, the device executes a preset week programming temperature time and temperature. You can set up to 4 stages of temperature every for WEEKDAY ➀➁➂➃➄, SATURDAY ➅ and SUNDAY ➆.": "PROGRAMMING MODE ⏱ - In this mode, the device executes a preset week programming temperature time and temperature. You can set up to 4 stages of temperature every for WEEKDAY ➀➁➂➃➄, SATURDAY ➅ and SUNDAY ➆.", - "Maximum temperature limit": "Maximum temperature limit", - "Select temperature sensor to use": "Select temperature sensor to use", - "Mode of the fan": "Mode of the fan", + "Boost Time Setting 100 sec - 900 sec, (default = 300 sec)": "Boost Time Setting 100 sec - 900 sec, (default = 300 sec)", + "Indicator light status": "Indicator light status", + "Controls the behavior when the device is powered on": "Controls the behavior when the device is powered on", + "Maximum temperature limit. Cuts the thermostat out regardless of air temperature if the external floor sensor exceeds this temperature. Only used by the thermostat when in AL sensor mode.": "Maximum temperature limit. Cuts the thermostat out regardless of air temperature if the external floor sensor exceeds this temperature. Only used by the thermostat when in AL sensor mode.", + "Minimum temperature limit for frost protection. Turns the thermostat on regardless of setpoint if the temperature drops below this.": "Minimum temperature limit for frost protection. Turns the thermostat on regardless of setpoint if the temperature drops below this.", + "Time of day and setpoint to use when in program mode": "Time of day and setpoint to use when in program mode", + "Hysteresis setting": "Hysteresis setting", + "Type of sensor. Sensor resistance value (kOhm)": "Type of sensor. Sensor resistance value (kOhm)", + "Display current temperature or target temperature": "Display current temperature or target temperature", + "Display brightness": "Display brightness", + "Display brightness in standby mode": "Display brightness in standby mode", + "It is necessary to press the link button to update": "It is necessary to press the link button to update", + "Total active power delivered": "Total active power delivered", + "Total active power injected": "Total active power injected", + "Total provider active power delivered (index 01)": "Total provider active power delivered (index 01)", + "Total provider active power delivered (index 02)": "Total provider active power delivered (index 02)", + "Total provider active power delivered (index 03)": "Total provider active power delivered (index 03)", + "Total provider active power delivered (index 04)": "Total provider active power delivered (index 04)", + "Total provider active power delivered (index 05)": "Total provider active power delivered (index 05)", + "Total provider active power delivered (index 06)": "Total provider active power delivered (index 06)", + "Total provider active power delivered (index 07)": "Total provider active power delivered (index 07)", + "Total provider active power delivered (index 08)": "Total provider active power delivered (index 08)", + "Total provider active power delivered (index 09)": "Total provider active power delivered (index 09)", + "Total provider active power delivered (index 10)": "Total provider active power delivered (index 10)", + "Serial Number": "Serial Number", + "PRM number": "PRM number", + "Apparent power of reference": "Apparent power of reference", + "Apparent power threshold": "Apparent power threshold", + "Customer tele-information protocol version": "Customer tele-information protocol version", + "Current point of the active load curve drawn": "Current point of the active load curve drawn", + "Previous point of the active load curve drawn": "Previous point of the active load curve drawn", + "Average RMS voltage (phase 1)": "Average RMS voltage (phase 1)", + "Total reactive power (Q1)": "Total reactive power (Q1)", + "Total reactive power (Q2)": "Total reactive power (Q2)", + "Total reactive power (Q3)": "Total reactive power (Q3)", + "Total reactive power (Q4)": "Total reactive power (Q4)", + "RMS current": "RMS current", + "Active energy withdrawn Distributor (index 01)": "Active energy withdrawn Distributor (index 01)", + "Active energy withdrawn Distributor (index 02)": "Active energy withdrawn Distributor (index 02)", + "Active energy withdrawn Distributor (index 03)": "Active energy withdrawn Distributor (index 03)", + "Active energy withdrawn Distributor (index 04)": "Active energy withdrawn Distributor (index 04)", + "Current date and time": "Current date and time", + "Current tariff index number": "Current tariff index number", + "Current supplier price label": "Current supplier price label", + "Supplier pricing schedule name": "Supplier pricing schedule name", + "Current day number supplier calendar": "Current day number supplier calendar", + "Next day number supplier calendar": "Next day number supplier calendar", + "Profile of the next supplier calendar day": "Profile of the next supplier calendar day", + "Profile of the next check-in day": "Profile of the next check-in day", + "Point n of the withdrawn active load curve": "Point n of the withdrawn active load curve", + "Point n-1 of the withdrawn active load curve": "Point n-1 of the withdrawn active load curve", + "Instantaneous apparent power injected": "Instantaneous apparent power injected", + "Apparent power max. injected n": "Apparent power max. injected n", + "Apparent power max. injected n-1": "Apparent power max. injected n-1", + "Message short": "Message short", + "Message ultra-short": "Message ultra-short", + "Start mobile point 1": "Start mobile point 1", + "Start mobile point 2": "Start mobile point 2", + "Start mobile point 3": "Start mobile point 3", + "Register of Statutes": "Register of Statutes", + "Stop mobile point 1": "Stop mobile point 1", + "Stop mobile point 2": "Stop mobile point 2", + "Stop mobile point 3": "Stop mobile point 3", + "Apparent power delivered peak": "Apparent power delivered peak", + "Immediate apparent power delivered": "Immediate apparent power delivered", + "Apparent power max. draw-off n-1": "Apparent power max. draw-off n-1", + "Apparent power delivered peak (phase 2)": "Apparent power delivered peak (phase 2)", + "Apparent power delivered peak (phase 3)": "Apparent power delivered peak (phase 3)", + "Immediate apparent power delivered (phase 2)": "Immediate apparent power delivered (phase 2)", + "Immediate apparent power delivered (phase 3)": "Immediate apparent power delivered (phase 3)", + "Total immediate apparent power delivered": "Total immediate apparent power delivered", + "Average RMS voltage (phase 3)": "Average RMS voltage (phase 3)", + "Average RMS voltage (phase 2)": "Average RMS voltage (phase 2)", + "RMS current (phase 2)": "RMS current (phase 2)", + "RMS current (phase 3)": "RMS current (phase 3)", + "RMS voltage (phase 2)": "RMS voltage (phase 2)", + "RMS voltage (phase 3)": "RMS voltage (phase 3)", + "Apparent power max. draw-off n-1 (phase 2)": "Apparent power max. draw-off n-1 (phase 2)", + "Apparent power max. draw-off n-1 (phase 3)": "Apparent power max. draw-off n-1 (phase 3)", + "Current pricing period": "Current pricing period", + "Meter Status Word": "Meter Status Word", + "Schedule HPHC": "Schedule HPHC", + "EJP start notice (30min)": "EJP start notice (30min)", + "Tomorrow color": "Tomorrow color", + "RMS current peak": "RMS current peak", + "Subscribed Power Exceeded Warning": "Subscribed Power Exceeded Warning", + "RMS current peak (phase 2)": "RMS current peak (phase 2)", + "RMS current peak (phase 3)": "RMS current peak (phase 3)", + "Presence of potentials": "Presence of potentials", + "Over Current Warning (phase 1)": "Over Current Warning (phase 1)", + "Over Current Warning (phase 2)": "Over Current Warning (phase 2)", + "Over Current Warning (phase 3)": "Over Current Warning (phase 3)", "Motor options": "Motor options", "Motor direction": "Motor direction", "Motor is moving": "Motor is moving", @@ -301,6 +905,7 @@ "Open window time in minute": "Open window time in minute", "Unknown binary one": "Unknown binary one", "Unknown binary two": "Unknown binary two", + "Away mode": "Away mode", "Start away year 20xx": "Start away year 20xx", "Start away month": "Start away month", "Start away day": "Start away day", @@ -333,43 +938,146 @@ "Temperature 9": "Temperature 9", "Hour TO for temp 9": "Hour TO for temp 9", "Minute TO for temp 9": "Minute TO for temp 9", - "Enable/disable the power alarm": "Enable/disable the power alarm", + "Auto off after specific time for manual watering.": "Auto off after specific time for manual watering.", + "Remaining time until the watering turns off.": "Remaining time until the watering turns off.", + "Indicates if the frost guard is currently active. If the temperature drops below 5° C, device activates frost guard and disables irrigation. You need to reset the frost guard to activate irrigation again. Note: There is no way to enable frost guard manually.": "Indicates if the frost guard is currently active. If the temperature drops below 5° C, device activates frost guard and disables irrigation. You need to reset the frost guard to activate irrigation again. Note: There is no way to enable frost guard manually.", + "Resets frost lock to make the device workable again.": "Resets frost lock to make the device workable again.", + "Scheduling mode that is currently in use.": "Scheduling mode that is currently in use.", + "Watering by periodic interval: Irrigate every n days": "Watering by periodic interval: Irrigate every n days", + "Watering by weekday: Irrigate individually for each day.": "Watering by weekday: Irrigate individually for each day.", + "Watering time slot 1": "Watering time slot 1", + "On/off state of the time slot": "On/off state of the time slot", + "Starting time (hour)": "Starting time (hour)", + "Starting time (minute)": "Starting time (minute)", + "Auto off after specific time for scheduled watering.": "Auto off after specific time for scheduled watering.", + "Pause after each iteration.": "Pause after each iteration.", + "Number of watering iterations. Works only if there is a pause.": "Number of watering iterations. Works only if there is a pause.", + "Watering time slot 2": "Watering time slot 2", + "Watering time slot 3": "Watering time slot 3", + "Watering time slot 4": "Watering time slot 4", + "Watering time slot 5": "Watering time slot 5", + "Watering time slot 6": "Watering time slot 6", "Specifies the minimum brightness value": "Specifies the minimum brightness value", "Specifies the maximum brightness value": "Specifies the maximum brightness value", + "Enables the LED when the power socket is turned off,\n allowing to see it in the dark": "Enables the LED when the power socket is turned off,\n allowing to see it in the dark", + "Enables the LED when the device is turned on": "Enables the LED when the device is turned on", "Allow the device to change brightness": "Allow the device to change brightness", + "Enables the LED when the light is turned off, allowing to see the switch in the dark": "Enables the LED when the light is turned off, allowing to see the switch in the dark", + "Enables the LED when the light is turned on": "Enables the LED when the light is turned on", + "Works only when the pilot wire is deactivated": "Works only when the pilot wire is deactivated", + "Controls the behavior when the device is powered on. Works only when the pilot wire is\n deactivated": "Controls the behavior when the device is powered on. Works only when the pilot wire is\n deactivated", + "Enable/disable the power alarm": "Enable/disable the power alarm", + "Enables the LED when the power socket is turned off,\n allowing to see it in the dark": "Enables the LED when the power socket is turned off,\n allowing to see it in the dark", "On/off (works only if device is in \"switch\" mode)": "On/off (works only if device is in \"switch\" mode)", "switch: allow on/off, auto will use wired action via C1/C2 on teleruptor with buttons": "switch: allow on/off, auto will use wired action via C1/C2 on teleruptor with buttons", + "Switch: allow manual on/off, auto uses contact's C1/C2 wired actions for Peak/Off-Peak electricity rates": "Switch: allow manual on/off, auto uses contact's C1/C2 wired actions for Peak/Off-Peak electricity rates", + "Off/auto/on (override) (works only if device is set to \"auto\" mode)": "Off/auto/on (override) (works only if device is set to \"auto\" mode)", "switch: allow on/off, auto will use wired action via C1/C2 on contactor for example with HC/HP": "switch: allow on/off, auto will use wired action via C1/C2 on contactor for example with HC/HP", "Enabled LED": "Enabled LED", "PIR keep time 0:5s|1:30s|2:60s|3:180s|4:300s|5:600s|6:1200s|7:1800s": "PIR keep time 0:5s|1:30s|2:60s|3:180s|4:300s|5:600s|6:1200s|7:1800s", "Illuminance calibration": "Illuminance calibration", + "Animation Effect to use for the LEDs": "Animation Effect to use for the LEDs", + "Calculated by using a hue color circle(value/255*360) If color = 255 display white": "Calculated by using a hue color circle(value/255*360) If color = 255 display white", + "Brightness of the LEDs": "Brightness of the LEDs", + "1-60 is in seconds calculated 61-120 is in minutes calculated by(value-60) Example a value of 65 would be 65-60 = 5 minutes - 120-254 Is in hours calculated by(value-120) Example a value of 132 would be 132-120 would be 12 hours. - 255 Indefinitely": "1-60 is in seconds calculated 61-120 is in minutes calculated by(value-60) Example a value of 65 would be 65-60 = 5 minutes - 120-254 Is in hours calculated by(value-120) Example a value of 132 would be 132-120 would be 12 hours. - 255 Indefinitely", + "Individual LED to target.": "Individual LED to target.", + "Animation Effect to use for the LED": "Animation Effect to use for the LED", + "Brightness of the LED": "Brightness of the LED", + "1-60 is in seconds calculated 61-120 is in minutes calculated by(value-60) Example a value of 65 would be 65-60 = 5 minutes - 120-254 Is in hours calculated by(value-120) Example a value of 132 would be 132-120 would be 12 hours. - 255 Indefinitely": "1-60 is in seconds calculated 61-120 is in minutes calculated by(value-60) Example a value of 65 would be 65-60 = 5 minutes - 120-254 Is in hours calculated by(value-120) Example a value of 132 would be 132-120 would be 12 hours. - 255 Indefinitely", + "This changes the speed that the light dims up when controlled from the hub. A setting of 0 turns the light immediately on. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 25 (2.5s)": "This changes the speed that the light dims up when controlled from the hub. A setting of 0 turns the light immediately on. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 25 (2.5s)", + "This changes the speed that the light dims up when controlled at the switch. A setting of 0 turns the light immediately on. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 127 - Keep in sync with dimmingSpeedUpRemote setting.": "This changes the speed that the light dims up when controlled at the switch. A setting of 0 turns the light immediately on. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 127 - Keep in sync with dimmingSpeedUpRemote setting.", + "This changes the speed that the light turns on when controlled from the hub. A setting of 0 turns the light immediately on. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 127 - Keep in sync with dimmingSpeedUpRemote setting.": "This changes the speed that the light turns on when controlled from the hub. A setting of 0 turns the light immediately on. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 127 - Keep in sync with dimmingSpeedUpRemote setting.", + "This changes the speed that the light turns on when controlled at the switch. A setting of 0 turns the light immediately on. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 127 - Keep in sync with dimmingSpeedUpRemote setting.": "This changes the speed that the light turns on when controlled at the switch. A setting of 0 turns the light immediately on. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 127 - Keep in sync with dimmingSpeedUpRemote setting.", + "This changes the speed that the light dims down when controlled from the hub. A setting of 0 turns the light immediately off. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 127 - Keep in sync with dimmingSpeedUpRemote setting.": "This changes the speed that the light dims down when controlled from the hub. A setting of 0 turns the light immediately off. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 127 - Keep in sync with dimmingSpeedUpRemote setting.", + "This changes the speed that the light dims down when controlled at the switch. A setting of 0 turns the light immediately off. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 127 - Keep in sync with dimmingSpeedUpLocal setting.": "This changes the speed that the light dims down when controlled at the switch. A setting of 0 turns the light immediately off. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 127 - Keep in sync with dimmingSpeedUpLocal setting.", + "This changes the speed that the light turns off when controlled from the hub. A setting of 'instant' turns the light immediately off. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 127 - Keep in sync with rampRateOffToOnRemote setting.": "This changes the speed that the light turns off when controlled from the hub. A setting of 'instant' turns the light immediately off. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 127 - Keep in sync with rampRateOffToOnRemote setting.", + "This changes the speed that the light turns off when controlled at the switch. A setting of 'instant' turns the light immediately off. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 127 - Keep in sync with rampRateOffToOnLocal setting.": "This changes the speed that the light turns off when controlled at the switch. A setting of 'instant' turns the light immediately off. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 127 - Keep in sync with rampRateOffToOnLocal setting.", + "The minimum level that the dimmer allows the bulb to be dimmed to. Useful when the user has an LED bulb that does not turn on or flickers at a lower level.": "The minimum level that the dimmer allows the bulb to be dimmed to. Useful when the user has an LED bulb that does not turn on or flickers at a lower level.", + "The maximum level that the dimmer allows the bulb to be dimmed to.Useful when the user has an LED bulb that reaches its maximum level before the dimmer value of 99 or when the user wants to limit the maximum brightness.": "The maximum level that the dimmer allows the bulb to be dimmed to.Useful when the user has an LED bulb that reaches its maximum level before the dimmer value of 99 or when the user wants to limit the maximum brightness.", + "Inverts the orientation of the switch. Useful when the switch is installed upside down. Essentially up becomes down and down becomes up.": "Inverts the orientation of the switch. Useful when the switch is installed upside down. Essentially up becomes down and down becomes up.", + "Automatically turns the switch off after this many seconds. When the switch is turned on a timer is started. When the timer expires, the switch is turned off. 0 = Auto off is disabled.": "Automatically turns the switch off after this many seconds. When the switch is turned on a timer is started. When the timer expires, the switch is turned off. 0 = Auto off is disabled.", + "Default level for the dimmer when it is turned on at the switch. A setting of 255 means that the switch will return to the level that it was on before it was turned off.": "Default level for the dimmer when it is turned on at the switch. A setting of 255 means that the switch will return to the level that it was on before it was turned off.", + "Default level for the dimmer when it is turned on from the hub. A setting of 255 means that the switch will return to the level that it was on before it was turned off.": "Default level for the dimmer when it is turned on from the hub. A setting of 255 means that the switch will return to the level that it was on before it was turned off.", + "The state the switch should return to when power is restored after power failure. 0 = off, 1-254 = level, 255 = previous.": "The state the switch should return to when power is restored after power failure. 0 = off, 1-254 = level, 255 = previous.", + "Shows the level that the load is at for x number of seconds after the load is adjusted and then returns to the Default LED state. 0 = Stay Off, 1-10 = seconds, 11 = Stay On.": "Shows the level that the load is at for x number of seconds after the load is adjusted and then returns to the Default LED state. 0 = Stay Off, 1-10 = seconds, 11 = Stay On.", + "Percent power level change that will result in a new power report being sent. 0 = Disabled": "Percent power level change that will result in a new power report being sent. 0 = Disabled", + "Time period between consecutive power & energy reports being sent (in seconds). The timer is reset after each report is sent.": "Time period between consecutive power & energy reports being sent (in seconds). The timer is reset after each report is sent.", + "Energy reports Energy level change which will result in sending a new energy report.0 = disabled, 1-32767 = 0.01kWh-327.67kWh. Default setting: 10 (0.1 kWh)": "Energy reports Energy level change which will result in sending a new energy report.0 = disabled, 1-32767 = 0.01kWh-327.67kWh. Default setting: 10 (0.1 kWh)", + "Set the power type for the device.": "Set the power type for the device.", + "Set the switch configuration.": "Set the switch configuration.", + "Increase level in non-neutral mode": "Increase level in non-neutral mode", + "This will set the button press delay. 0 = no delay (Disables Button Press Events),Default = 500ms.": "This will set the button press delay. 0 = no delay (Disables Button Press Events),Default = 500ms.", + "For use with Smart Bulbs that need constant power and are controlled via commands rather than power.": "For use with Smart Bulbs that need constant power and are controlled via commands rather than power.", + "Enable or Disable setting brightness to parameter 55 on double-tap UP.": "Enable or Disable setting brightness to parameter 55 on double-tap UP.", + "Enable or Disable setting brightness to parameter 56 on double-tap DOWN.": "Enable or Disable setting brightness to parameter 56 on double-tap DOWN.", + "Set this level on double-tap UP (if enabled by P53).": "Set this level on double-tap UP (if enabled by P53).", + "Set this level on double-tap DOWN (if enabled by P54).": "Set this level on double-tap DOWN (if enabled by P54).", + "Set the color of the LED Indicator when the load is on.": "Set the color of the LED Indicator when the load is on.", + "Set the color of the LED Indicator when the load is off.": "Set the color of the LED Indicator when the load is off.", + "Set the intensity of the LED Indicator when the load is on.": "Set the intensity of the LED Indicator when the load is on.", + "Set the intensity of the LED Indicator when the load is off.": "Set the intensity of the LED Indicator when the load is off.", + "Method used for scaling.": "Method used for scaling.", + "Have unique scene numbers for scenes activated with the aux switch.": "Have unique scene numbers for scenes activated with the aux switch.", + "Send Move_To_Level using Default Level with Off/On to bound devices.": "Send Move_To_Level using Default Level with Off/On to bound devices.", + "Ability to control switch from the wall.": "Ability to control switch from the wall.", + "Ability to control switch from the hub.": "Ability to control switch from the hub.", + "Use device as a Dimmer or an On/Off switch.": "Use device as a Dimmer or an On/Off switch.", + "When the device is in On/Off mode, use full LED bar or just one LED.": "When the device is in On/Off mode, use full LED bar or just one LED.", + "Display progress on LED bar during firmware update.": "Display progress on LED bar during firmware update.", + "0-254:This is the color of the LED strip in a hex representation. 255:Synchronization with default all LED strip color parameter.": "0-254:This is the color of the LED strip in a hex representation. 255:Synchronization with default all LED strip color parameter.", + "Intesity of LED strip when on. 101 = Synchronized with default all LED strip intensity parameter.": "Intesity of LED strip when on. 101 = Synchronized with default all LED strip intensity parameter.", + "Intesity of LED strip when off. 101 = Synchronized with default all LED strip intensity parameter.": "Intesity of LED strip when off. 101 = Synchronized with default all LED strip intensity parameter.", + "In neutral on/off setups, the default is to have a clicking sound to notify you that the relay is open or closed. You may disable this sound by creating a, “simulated” on/off where the switch only will turn onto 100 or off to 0.": "In neutral on/off setups, the default is to have a clicking sound to notify you that the relay is open or closed. You may disable this sound by creating a, “simulated” on/off where the switch only will turn onto 100 or off to 0.", + "Double-Tap the Config button to clear notifications.": "Double-Tap the Config button to clear notifications.", "Reporting interval in minutes": "Reporting interval in minutes", - "Temperature calibration": "Temperature calibration", - "Humidity calibration": "Humidity calibration", "Enable PIR sensor": "Enable PIR sensor", "Enabled reporting": "Enabled reporting", - "PIR sensor sensitivity": "PIR sensor sensitivity", - "PIR keep time in seconds": "PIR keep time in seconds", + "Shows the zigbee2mqtt group bound to the active data point EP(1-4).": "Shows the zigbee2mqtt group bound to the active data point EP(1-4).", + "Only shows the transmitted color in X7Y-Mode. Noch changes possible.": "Only shows the transmitted color in X7Y-Mode. Noch changes possible.", + "color temperature value. Fixed values for each key press: 145, 175, 222, 304, 480 mired": "color temperature value. Fixed values for each key press: 145, 175, 222, 304, 480 mired", + "Sensirion VOC index": "Sensirion VOC index", + "Advanced color behavior": "Advanced color behavior", + "Controls whether color and color temperature can be set while light is off": "Controls whether color and color temperature can be set while light is off", "Current fan speed": "Current fan speed", - "Measured PM2.5 (particulate matter) concentration": "Measured PM2.5 (particulate matter) concentration", "Measured air quality": "Measured air quality", "Filter is older than 6 months and needs replacing": "Filter is older than 6 months and needs replacing", + "Time the filter has been used in minutes": "Time the filter has been used in minutes", "Indicates whether the device detected bright light (works only in night mode)": "Indicates whether the device detected bright light (works only in night mode)", "Prevent changes. `false` = run normally. `true` = prevent from making changes. Must be set to `false` when system_mode = off or `true` for heat": "Prevent changes. `false` = run normally. `true` = prevent from making changes. Must be set to `false` when system_mode = off or `true` for heat", "Period in minutes for which the setpoint hold will be active. 65535 = attribute not used. 0 to 360 to match the remote display": "Period in minutes for which the setpoint hold will be active. 65535 = attribute not used. 0 to 360 to match the remote display", - "Measured Hcho value": "Measured Hcho value", + "Measured HCHO value": "Measured HCHO value", "Air quality index": "Air quality index", "Measured PM10 (particulate matter) concentration": "Measured PM10 (particulate matter) concentration", + "Irrigation mode": "Irrigation mode", + "Number of cycle irrigation times, set to 0 for single cycle": "Number of cycle irrigation times, set to 0 for single cycle", + "Last irrigation start time": "Last irrigation start time", + "Last irrigation end time": "Last irrigation end time", + "Last irrigation duration": "Last irrigation duration", + "Last irrigation water consumption": "Last irrigation water consumption", + "Irrigation target, duration in seconds or capacity in litres (depending on mode), set to 0 to leave the valve on indefinitely, for safety reasons the target will be forced to a minimum of 10 seconds in duration mode": "Irrigation target, duration in seconds or capacity in litres (depending on mode), set to 0 to leave the valve on indefinitely, for safety reasons the target will be forced to a minimum of 10 seconds in duration mode", + "Cycle irrigation interval": "Cycle irrigation interval", + "Irrigation target, duration in minutes or capacity in litres (depending on mode)": "Irrigation target, duration in minutes or capacity in litres (depending on mode)", "Valve open percentage (multiple of 10)": "Valve open percentage (multiple of 10)", "Countdown timer in minutes": "Countdown timer in minutes", "SOS alarm": "SOS alarm", + "Remaining battery 2 in %": "Remaining battery 2 in %", + "Illuminance calibration in lux": "Illuminance calibration in lux", + "Temperature calibration (-2.0...2.0)": "Temperature calibration (-2.0...2.0)", + "Enable reporting": "Enable reporting", + "Control mode": "Control mode", + "External switch type": "External switch type", + "External switch status": "External switch status", + "Load detection mode": "Load detection mode", + "Load type": "Load type", + "Load dimmable": "Load dimmable", + "Power supply mode": "Power supply mode", + "Indicates whether the device detected rainfall": "Indicates whether the device detected rainfall", "Select between direct control of the valve via the `valve_position` or automatic control of the valve based on the `current_heating_setpoint`. For manual control set the value to 1, for automatic control set the value to 2 (the default). When switched to manual mode the display shows a value from 0 (valve closed) to 100 (valve fully open) and the buttons on the device are disabled.": "Select between direct control of the valve via the `valve_position` or automatic control of the valve based on the `current_heating_setpoint`. For manual control set the value to 1, for automatic control set the value to 2 (the default). When switched to manual mode the display shows a value from 0 (valve closed) to 100 (valve fully open) and the buttons on the device are disabled.", "Directly control the radiator valve when `trv_mode` is set to 1. The values range from 0 (valve closed) to 255 (valve fully open)": "Directly control the radiator valve when `trv_mode` is set to 1. The values range from 0 (valve closed) to 255 (valve fully open)", "Displayed text on thermostat display (zone). Max 14 characters": "Displayed text on thermostat display (zone). Max 14 characters", "Load in W when heating is on (between 0-2000 W). The thermostat uses the value as input to the mean_power calculation.": "Load in W when heating is on (between 0-2000 W). The thermostat uses the value as input to the mean_power calculation.", "Device in regulator or thermostat mode.": "Device in regulator or thermostat mode.", "When device is in regulator mode this controls the time between each in/out connection. When device is in thermostat mode this controls the time between each in/out switch when measured temperature is within +-0.5 °C set temperature. Choose a long time for (slow) concrete floors and a short time for (quick) wooden floors.": "When device is in regulator mode this controls the time between each in/out connection. When device is in thermostat mode this controls the time between each in/out switch when measured temperature is within +-0.5 °C set temperature. Choose a long time for (slow) concrete floors and a short time for (quick) wooden floors.", - "Current temperature measured from the floor sensor": "Current temperature measured from the floor sensor", "Set max floor temperature (between 20-35 °C) when \"supervisor_floor\" is set": "Set max floor temperature (between 20-35 °C) when \"supervisor_floor\" is set", "Reports average power usage last 10 minutes": "Reports average power usage last 10 minutes", "When frost guard is ON, it is activated when the thermostat is switched OFF with the ON/OFF button.At the same time, the display will fade and the text \"Frostsikring x °C\" appears in the display and remains until the thermostat is switched on again.": "When frost guard is ON, it is activated when the thermostat is switched OFF with the ON/OFF button.At the same time, the display will fade and the text \"Frostsikring x °C\" appears in the display and remains until the thermostat is switched on again.", @@ -398,7 +1106,12 @@ "Count of installed tubes": "Count of installed tubes", "This is applicable if tubes type is set to other": "This is applicable if tubes type is set to other", "Temperature of the CPU": "Temperature of the CPU", - "Indicates whether the device is being tested": "Indicates whether the device is being tested", + "State of input 1": "State of input 1", + "State of input 2": "State of input 2", + "State of input 3": "State of input 3", + "State of input 4": "State of input 4", + "On/off state of switch 1": "On/off state of switch 1", + "On/off state of switch 2": "On/off state of switch 2", "Set Squawk state": "Set Squawk state", "Turn on/off the strobe (light) for Squawk": "Turn on/off the strobe (light) for Squawk", "Max duration of the siren": "Max duration of the siren", @@ -411,15 +1124,14 @@ "Manual Start of Siren": "Manual Start of Siren", "Indicates reason if any fault": "Indicates reason if any fault", "Indicates whether the device are in fault state": "Indicates whether the device are in fault state", - "Instantaneous measured electrical current on phase B": "Instantaneous measured electrical current on phase B", - "Measured electrical potential value on phase B": "Measured electrical potential value on phase B", - "Instantaneous measured electrical current on phase C": "Instantaneous measured electrical current on phase C", - "Measured electrical potential value on phase C": "Measured electrical potential value on phase C", + "Instantaneous measured reactive power": "Instantaneous measured reactive power", + "Indicates if the card is inserted (= true) or not (= false)": "Indicates if the card is inserted (= true) or not (= false)", "Allow Master PIN Unlock": "Allow Master PIN Unlock", "Allow RFID to Unlock": "Allow RFID to Unlock", "Allow Auto Re-Lock": "Allow Auto Re-Lock", "Lock-Mode of the Lock": "Lock-Mode of the Lock", "Service Mode of the Lock": "Service Mode of the Lock", + "Enable/disable LED on motion": "Enable/disable LED on motion", "Absolute min temperature allowed on the device": "Absolute min temperature allowed on the device", "Absolute max temperature allowed on the device": "Absolute max temperature allowed on the device", "Min temperature limit set on the device": "Min temperature limit set on the device", @@ -429,402 +1141,30 @@ "Regulator Status": "Regulator Status", "Water Status of Regulator": "Water Status of Regulator", "Regulator role (Master vs Slave)": "Regulator role (Master vs Slave)", - "State or sensor value": "State or sensor value", - "Manual start of siren": "Manual start of siren", - "Type of user, unrestricted: owner (default), (year|week)_day_schedule: user has ability to open lock based on specific time period, master: user has ability to both program and operate the door lock, non_access: user is recognized by the lock but does not have the ability to open the lock": "Type of user, unrestricted: owner (default), (year|week)_day_schedule: user has ability to open lock based on specific time period, master: user has ability to both program and operate the door lock, non_access: user is recognized by the lock but does not have the ability to open the lock", - "After turn on, the indicator light turns on while switch is off, and vice versa": "After turn on, the indicator light turns on while switch is off, and vice versa", - "The current state of the motor.": "The current state of the motor.", - "Value of gas concentration": "Value of gas concentration", - "Gas concentration value at which an alarm is triggered (\"10%LEL\" is more sensitive than \"15%LEL\")": "Gas concentration value at which an alarm is triggered (\"10%LEL\" is more sensitive than \"15%LEL\")", - "Starts the self-test process (checking the indicator light and buzzer work properly)": "Starts the self-test process (checking the indicator light and buzzer work properly)", - "Self-test in progress": "Self-test in progress", - "\"Preparation\" or \"work\" (measurement of the gas concentration value and triggering of an alarm are only performed in the \"work\" state)": "\"Preparation\" or \"work\" (measurement of the gas concentration value and triggering of an alarm are only performed in the \"work\" state)", - "Number of power outages (since last pairing)": "Number of power outages (since last pairing)", - "Presence events: \"enter\", \"leave\", \"left_enter\", \"right_leave\", \"right_enter\", \"left_leave\", \"approach\", \"away\"": "Presence events: \"enter\", \"leave\", \"left_enter\", \"right_leave\", \"right_enter\", \"left_leave\", \"approach\", \"away\"", - "Monitoring mode with or without considering right and left sides": "Monitoring mode with or without considering right and left sides", - "The distance at which the sensor detects approaching": "The distance at which the sensor detects approaching", - "Time interval for detecting actions": "Time interval for detecting actions", - "Switch between rgbw mode or dual color temperature mode": "Switch between rgbw mode or dual color temperature mode", - "Brightness state": "Brightness state", - "presets for sensitivity for presence and movement": "presets for sensitivity for presence and movement", - "Tumble status switch": "Tumble status switch", - "fall sensitivity of the radar": "fall sensitivity of the radar", - "tumble alarm time": "tumble alarm time", - "fall down status": "fall down status", - "static dwell alarm": "static dwell alarm", - "Alarm humidity max": "Alarm humidity max", - "Alarm humidity min": "Alarm humidity min", - "Trigger the door movement": "Trigger the door movement", - "Plug LED indicator mode": "Plug LED indicator mode", - "When Anti-Freezing function is activated, the temperature in the house is kept at 8 °C, the device display \"AF\".press the pair button to cancel.": "When Anti-Freezing function is activated, the temperature in the house is kept at 8 °C, the device display \"AF\".press the pair button to cancel.", - "Battery life can be prolonged by switching the heating off. To achieve this, the valve is closed fully. To activate the heating stop, the device display \"HS\", press the pair button to cancel.": "Battery life can be prolonged by switching the heating off. To achieve this, the valve is closed fully. To activate the heating stop, the device display \"HS\", press the pair button to cancel.", - "Mode of this device, in the `heat` mode the TS0601 will remain continuously heating, i.e. it does not regulate to the desired temperature. If you want TRV to properly regulate the temperature you need to use mode `auto` instead setting the desired temperature.": "Mode of this device, in the `heat` mode the TS0601 will remain continuously heating, i.e. it does not regulate to the desired temperature. If you want TRV to properly regulate the temperature you need to use mode `auto` instead setting the desired temperature.", - "The measured CO (carbon monoxide) value": "The measured CO (carbon monoxide) value", - "The measured occupancy value": "The measured occupancy value", - "The measured noise value": "The measured noise value", - "Indicates whether the device detected noise": "Indicates whether the device detected noise", - "White brightness of this light": "White brightness of this light", - "Valve state if open or closed": "Valve state if open or closed", - "Position of the valve": "Position of the valve", - "Door status": "Door status", - "User ID can only number 1": "User ID can only number 1", - "Pincode to set, set pincode(4 digit) to null to clear": "Pincode to set, set pincode(4 digit) to null to clear", - "temperature of device internal mcu": "temperature of device internal mcu", - "Measured electrical power factor": "Measured electrical power factor", - "Measured electrical ac frequency": "Measured electrical ac frequency", - "Currently status": "Currently status", - "Time in seconds after which occupancy is cleared after detecting it": "Time in seconds after which occupancy is cleared after detecting it", - "Sets dimming mode to autodetect or fixed RC/RL/RL_LED mode (max load is reduced in RL_LED)": "Sets dimming mode to autodetect or fixed RC/RL/RL_LED mode (max load is reduced in RL_LED)", - "Duration of lift": "Duration of lift", - "Controls how programming affects the thermostat. Possible values: setpoint (only use specified setpoint), schedule (follow programmed setpoint schedule). Changing this value does not clear programmed schedules.": "Controls how programming affects the thermostat. Possible values: setpoint (only use specified setpoint), schedule (follow programmed setpoint schedule). Changing this value does not clear programmed schedules.", + "Is the unit in mounting mode. This is set to `false` for mounted (already on the radiator) or `true` for not mounted (after factory reset)": "Is the unit in mounting mode. This is set to `false` for mounted (already on the radiator) or `true` for not mounted (after factory reset)", + "Set the unit mounting mode. `false` Go to Mounted Mode or `true` Go to Mounting Mode": "Set the unit mounting mode. `false` Go to Mounted Mode or `true` Go to Mounting Mode", + "Thermostat Orientation. This is important for the PID in how it assesses temperature. `false` Horizontal or `true` Vertical": "Thermostat Orientation. This is important for the PID in how it assesses temperature. `false` Horizontal or `true` Vertical", + "Viewing/display direction, `false` normal or `true` upside-down": "Viewing/display direction, `false` normal or `true` upside-down", "Not clear how this affects operation. However, it would appear that the device does not execute any motor functions if this is set to false. This may be a means to conserve battery during periods that the heating system is not energized (e.g. during summer). `false` No Heat Available or `true` Heat Available": "Not clear how this affects operation. However, it would appear that the device does not execute any motor functions if this is set to false. This may be a means to conserve battery during periods that the heating system is not energized (e.g. during summer). `false` No Heat Available or `true` Heat Available", - "If `radiator_covered` is `true`: Set at maximum 30 minutes interval but not more often than every 5 minutes and 0.1 degrees difference. Resets every 35 minutes to standard. If `radiator_covered` is `false`: Set at maximum 3 hours interval but not more often than every 30 minutes and 0.1 degrees difference. Resets every 3 hours to standard. Value 21C = 2100 (-8000=undefined).": "If `radiator_covered` is `true`: Set at maximum 30 minutes interval but not more often than every 5 minutes and 0.1 degrees difference. Resets every 35 minutes to standard. If `radiator_covered` is `false`: Set at maximum 3 hours interval but not more often than every 30 minutes and 0.1 degrees difference. Resets every 3 hours to standard. Value 21C = 2100 (-8000=undefined).", - "Set if the TRV should solely rely on external_measured_room_sensor or operate in offset mode. `false` = Auto Offset Mode or `true` = Room Sensor Mode": "Set if the TRV should solely rely on external_measured_room_sensor or operate in offset mode. `false` = Auto Offset Mode or `true` = Room Sensor Mode", + "Whether or not the unit needs warm water. `false` No Heat Request or `true` Heat Request": "Whether or not the unit needs warm water. `false` No Heat Request or `true` Heat Request", + "Values observed are `0` (manual), `1` (schedule) or `2` (externally)": "Values observed are `0` (manual), `1` (schedule) or `2` (externally)", + "Scheduled change of the setpoint. Alternative method for changing the setpoint. In the opposite to occupied_heating_setpoint it does not trigger an aggressive response from the actuator. (more suitable for scheduled changes)": "Scheduled change of the setpoint. Alternative method for changing the setpoint. In the opposite to occupied_heating_setpoint it does not trigger an aggressive response from the actuator. (more suitable for scheduled changes)", + "The temperature sensor of the TRV is — due to its design — relatively close to the heat source (i.e. the hot water in the radiator). Thus there are situations where the `local_temperature` measured by the TRV is not accurate enough: If the radiator is covered behind curtains or furniture, if the room is rather big, or if the radiator itself is big and the flow temperature is high, then the temperature in the room may easily diverge from the `local_temperature` measured by the TRV by 5°C to 8°C. In this case you might choose to use an external room sensor and send the measured value of the external room sensor to the `External_measured_room_sensor` property.The way the TRV operates on the `External_measured_room_sensor` depends on the setting of the `Radiator_covered` property: If `Radiator_covered` is `false` (Auto Offset Mode): You *must* set the `External_measured_room_sensor` property *at least* every 3 hours. After 3 hours the TRV disables this function and resets the value of the `External_measured_room_sensor` property to -8000 (disabled). You *should* set the `External_measured_room_sensor` property *at most* every 30 minutes or every 0.1K change in measured room temperature.If `Radiator_covered` is `true` (Room Sensor Mode): You *must* set the `External_measured_room_sensor` property *at least* every 30 minutes. After 35 minutes the TRV disables this function and resets the value of the `External_measured_room_sensor` property to -8000 (disabled). You *should* set the `External_measured_room_sensor` property *at most* every 5 minutes or every 0.1K change in measured room temperature.": "The temperature sensor of the TRV is — due to its design — relatively close to the heat source (i.e. the hot water in the radiator). Thus there are situations where the `local_temperature` measured by the TRV is not accurate enough: If the radiator is covered behind curtains or furniture, if the room is rather big, or if the radiator itself is big and the flow temperature is high, then the temperature in the room may easily diverge from the `local_temperature` measured by the TRV by 5°C to 8°C. In this case you might choose to use an external room sensor and send the measured value of the external room sensor to the `External_measured_room_sensor` property.The way the TRV operates on the `External_measured_room_sensor` depends on the setting of the `Radiator_covered` property: If `Radiator_covered` is `false` (Auto Offset Mode): You *must* set the `External_measured_room_sensor` property *at least* every 3 hours. After 3 hours the TRV disables this function and resets the value of the `External_measured_room_sensor` property to -8000 (disabled). You *should* set the `External_measured_room_sensor` property *at most* every 30 minutes or every 0.1K change in measured room temperature.If `Radiator_covered` is `true` (Room Sensor Mode): You *must* set the `External_measured_room_sensor` property *at least* every 30 minutes. After 35 minutes the TRV disables this function and resets the value of the `External_measured_room_sensor` property to -8000 (disabled). You *should* set the `External_measured_room_sensor` property *at most* every 5 minutes or every 0.1K change in measured room temperature.", + "Controls whether the TRV should solely rely on an external room sensor or operate in offset mode. `false` = Auto Offset Mode (use this e.g. for exposed radiators) or `true` = Room Sensor Mode (use this e.g. for covered radiators). Please note that this flag only controls how the TRV operates on the value of `External_measured_room_sensor`; only setting this flag without setting the `External_measured_room_sensor` has no (noticeable?) effect.": "Controls whether the TRV should solely rely on an external room sensor or operate in offset mode. `false` = Auto Offset Mode (use this e.g. for exposed radiators) or `true` = Room Sensor Mode (use this e.g. for covered radiators). Please note that this flag only controls how the TRV operates on the value of `External_measured_room_sensor`; only setting this flag without setting the `External_measured_room_sensor` has no (noticeable?) effect.", "Whether or not the window open feature is enabled": "Whether or not the window open feature is enabled", + "0=Quarantine, 1=Windows are closed, 2=Hold - Windows are maybe about to open, 3=Open window detected, 4=In window open state from external but detected closed locally": "0=Quarantine, 1=Windows are closed, 2=Hold - Windows are maybe about to open, 3=Open window detected, 4=In window open state from external but detected closed locally", + "Set if the window is open or close. This setting will trigger a change in the internal window and heating demand. `false` (windows are closed) or `true` (windows are open)": "Set if the window is open or close. This setting will trigger a change in the internal window and heating demand. `false` (windows are closed) or `true` (windows are open)", + "Exercise day of week: 0=Sun...6=Sat, 7=undefined": "Exercise day of week: 0=Sun...6=Sat, 7=undefined", + "Exercise trigger time. Minutes since midnight (65535=undefined). Range 0 to 1439": "Exercise trigger time. Minutes since midnight (65535=undefined). Range 0 to 1439", + "Scale factor of setpoint filter timeconstant (\"aggressiveness\" of control algorithm) 1= Quick ... 5=Moderate ... 10=Slow": "Scale factor of setpoint filter timeconstant (\"aggressiveness\" of control algorithm) 1= Quick ... 5=Moderate ... 10=Slow", + "Whether or not the thermostat acts as standalone thermostat or shares load with other thermostats in the room. The gateway must update load_room_mean if enabled.": "Whether or not the thermostat acts as standalone thermostat or shares load with other thermostats in the room. The gateway must update load_room_mean if enabled.", "Mean radiator load for room calculated by gateway for load balancing purposes (-8000=undefined)": "Mean radiator load for room calculated by gateway for load balancing purposes (-8000=undefined)", - "Current display unit": "Current display unit", - "Temperature alarm status": "Temperature alarm status", - "Temperature sensitivity": "Temperature sensitivity", - "Indicator light status": "Indicator light status", - "The delta between local_temperature and current_heating_setpoint to trigger Heat": "The delta between local_temperature and current_heating_setpoint to trigger Heat", - "Serial Number": "Serial Number", - "Base index": "Base index", - "Tarif option": "Tarif option", - "Subscribed intensity level": "Subscribed intensity level", - "HCHC index": "HCHC index", - "HCHP index": "HCHP index", - "BBRHCJW index": "BBRHCJW index", - "BBRHPJW index": "BBRHPJW index", - "BBRHCJR index": "BBRHCJR index", - "BBRHPJR index": "BBRHPJR index", - "RMS current": "RMS current", - "RMS current (phase 2)": "RMS current (phase 2)", - "RMS current (phase 3)": "RMS current (phase 3)", - "RMS current peak": "RMS current peak", - "RMS current peak (phase 2)": "RMS current peak (phase 2)", - "RMS current peak (phase 3)": "RMS current peak (phase 3)", - "Three-phase power peak": "Three-phase power peak", - "Apparent power": "Apparent power", - "Current pricing period": "Current pricing period", - "Tomorrow color": "Tomorrow color", - "Schedule HPHC": "Schedule HPHC", - "Presence of potentials": "Presence of potentials", - "EJP start notice (30min)": "EJP start notice (30min)", - "Subscribed Power Exceeded Warning": "Subscribed Power Exceeded Warning", - "Over Current Warning (phase 1)": "Over Current Warning (phase 1)", - "Over Current Warning (phase 2)": "Over Current Warning (phase 2)", - "Over Current Warning (phase 3)": "Over Current Warning (phase 3)", - "Current supplier price label": "Current supplier price label", - "Current tariff index number": "Current tariff index number", - "Customer tele-information protocol version": "Customer tele-information protocol version", - "Current date and time": "Current date and time", - "Total provider active power delivered (index 07)": "Total provider active power delivered (index 07)", - "Total provider active power delivered (index 08)": "Total provider active power delivered (index 08)", - "Total provider active power delivered (index 09)": "Total provider active power delivered (index 09)", - "Total provider active power delivered (index 10)": "Total provider active power delivered (index 10)", - "Active energy withdrawn Distributor (index 01)": "Active energy withdrawn Distributor (index 01)", - "Active energy withdrawn Distributor (index 02)": "Active energy withdrawn Distributor (index 02)", - "Active energy withdrawn Distributor (index 03)": "Active energy withdrawn Distributor (index 03)", - "Active energy withdrawn Distributor (index 04)": "Active energy withdrawn Distributor (index 04)", - "Total active power injected": "Total active power injected", - "Total reactive power (Q1)": "Total reactive power (Q1)", - "Total reactive power (Q2)": "Total reactive power (Q2)", - "Total reactive power (Q3)": "Total reactive power (Q3)", - "Total reactive power (Q4)": "Total reactive power (Q4)", - "RMS voltage": "RMS voltage", - "RMS voltage (phase 2)": "RMS voltage (phase 2)", - "RMS voltage (phase 3)": "RMS voltage (phase 3)", - "Register of Statutes": "Register of Statutes", - "Apparent power threshold": "Apparent power threshold", - "Instantaneous apparent power injected": "Instantaneous apparent power injected", - "Apparent power max. injected n": "Apparent power max. injected n", - "Apparent power max. injected n-1": "Apparent power max. injected n-1", - "Current point of the active load curve drawn": "Current point of the active load curve drawn", - "Previous point of the active load curve drawn": "Previous point of the active load curve drawn", - "Point n of the withdrawn active load curve": "Point n of the withdrawn active load curve", - "Point n-1 of the withdrawn active load curve": "Point n-1 of the withdrawn active load curve", - "Average RMS voltage (phase 1)": "Average RMS voltage (phase 1)", - "Average RMS voltage (phase 2)": "Average RMS voltage (phase 2)", - "Average RMS voltage (phase 3)": "Average RMS voltage (phase 3)", - "Immediate apparent power delivered (phase 2)": "Immediate apparent power delivered (phase 2)", - "Immediate apparent power delivered (phase 3)": "Immediate apparent power delivered (phase 3)", - "Apparent power delivered peak (phase 2)": "Apparent power delivered peak (phase 2)", - "Apparent power delivered peak (phase 3)": "Apparent power delivered peak (phase 3)", - "Apparent power max. draw-off n-1": "Apparent power max. draw-off n-1", - "Apparent power max. draw-off n-1 (phase 2)": "Apparent power max. draw-off n-1 (phase 2)", - "Apparent power max. draw-off n-1 (phase 3)": "Apparent power max. draw-off n-1 (phase 3)", - "Message short": "Message short", - "Message ultra-short": "Message ultra-short", - "PRM number": "PRM number", - "Start mobile point 1": "Start mobile point 1", - "Stop mobile point 1": "Stop mobile point 1", - "Start mobile point 2": "Start mobile point 2", - "Stop mobile point 2": "Stop mobile point 2", - "Start mobile point 3": "Start mobile point 3", - "Stop mobile point 3": "Stop mobile point 3", - "Current day number supplier calendar": "Current day number supplier calendar", - "Next day number supplier calendar": "Next day number supplier calendar", - "Profile of the next supplier calendar day": "Profile of the next supplier calendar day", - "Profile of the next check-in day": "Profile of the next check-in day", - "Works only when the pilot wire is deactivated": "Works only when the pilot wire is deactivated", - "Measured electrical AC frequency": "Measured electrical AC frequency", - "Indicates if the card is inserted (= true) or not (= false)": "Indicates if the card is inserted (= true) or not (= false)", - "Prevent changes. `false` = run normally. `true` = prevent from making changes.": "Prevent changes. `false` = run normally. `true` = prevent from making changes.", - "Enable or disable the blue backlight LED": "Enable or disable the blue backlight LED", - "Triggered action on the lock": "Triggered action on the lock", - "Source of the triggered action on the lock": "Source of the triggered action on the lock", - "ID of user that triggered the action on the lock": "ID of user that triggered the action on the lock", - "Number of power outages": "Number of power outages", - "The current charging status.": "The current charging status.", - "Whether the motor is moving or not": "Whether the motor is moving or not", - "Motor state": "Motor state", - "Value of smoke concentration": "Value of smoke concentration", - "Value of smoke concentration in dB/m": "Value of smoke concentration in dB/m", - "When this option is enabled then in the normal monitoring state, the green indicator light flashes every 60 seconds": "When this option is enabled then in the normal monitoring state, the green indicator light flashes every 60 seconds", - "Different sensitivities means different static human body recognition rate and response speed of occupied": "Different sensitivities means different static human body recognition rate and response speed of occupied", - "Reset the status of no presence": "Reset the status of no presence", - "Is the device plugged in": "Is the device plugged in", - "Smoke alarm status": "Smoke alarm status", - "Test alarm": "Test alarm", - "Test alarm result": "Test alarm result", - "Battery level state": "Battery level state", - "Alarm enable": "Alarm enable", - "Fault alarm status": "Fault alarm status", - "Silence siren": "Silence siren", - "PIR sensor sensitivity (refresh and update only while active)": "PIR sensor sensitivity (refresh and update only while active)", - "PIR keep time in seconds (refresh and update only while active)": "PIR keep time in seconds (refresh and update only while active)", - "Report interval": "Report interval", - "Humidity alarm status": "Humidity alarm status", - "Distance to target": "Distance to target", - "Minimum range": "Minimum range", - "Maximum range": "Maximum range", - "Detection delay": "Detection delay", - "Fading time": "Fading time", - "Self_test, possible resuts: checking, check_success, check_failure, others, comm_fault, radar_fault.": "Self_test, possible resuts: checking, check_success, check_failure, others, comm_fault, radar_fault.", - "Indicates if the garage door contact is closed (= true) or open (= false)": "Indicates if the garage door contact is closed (= true) or open (= false)", - "Relay LED indicator mode": "Relay LED indicator mode", - "Window open?": "Window open?", - "Maximum light brightness": "Maximum light brightness", - "Group where the action was triggered on": "Group where the action was triggered on", - "Time in seconds after which noise is cleared after detecting it (default: 60)": "Time in seconds after which noise is cleared after detecting it (default: 60)", - "Time in seconds after which occupancy is cleared after detecting it (default: 60)": "Time in seconds after which occupancy is cleared after detecting it (default: 60)", - "Self-heating compensation. The compensation value is subtracted from the measured temperature": "Self-heating compensation. The compensation value is subtracted from the measured temperature", - "If the sensor is triggered by the slightest movement, reduce the sensitivity, otherwise increase it (default: 50)": "If the sensor is triggered by the slightest movement, reduce the sensitivity, otherwise increase it (default: 50)", - "The minimum noise level at which the detector will work (default: 50)": "The minimum noise level at which the detector will work (default: 50)", - "Automatic calibration of the CO2 sensor. If ON, the CO2 sensor will automatically calibrate every 7 days.": "Automatic calibration of the CO2 sensor. If ON, the CO2 sensor will automatically calibrate every 7 days.", - "Ventilate the room for 20 minutes, turn on manual calibration, and turn it off after one second. After about 5 minutes the CO2 sensor will show 400ppm. Calibration completed": "Ventilate the room for 20 minutes, turn on manual calibration, and turn it off after one second. After about 5 minutes the CO2 sensor will show 400ppm. Calibration completed", - "Turn on when working in conditions of high humidity (more than 70 %, RH) or condensation, if the sensor shows 0 or 100 %.": "Turn on when working in conditions of high humidity (more than 70 %, RH) or condensation, if the sensor shows 0 or 100 %.", - "Instantaneous measured apparent power": "Instantaneous measured apparent power", - "Instantaneous measured power on phase A": "Instantaneous measured power on phase A", - "Instantaneous measured power on phase B": "Instantaneous measured power on phase B", - "Instantaneous measured power on phase C": "Instantaneous measured power on phase C", - "Instantaneous measured power factor": "Instantaneous measured power factor", - "Sum of consumed energy on phase A": "Sum of consumed energy on phase A", - "Sum of consumed energy on phase B": "Sum of consumed energy on phase B", - "Sum of consumed energy on phase C": "Sum of consumed energy on phase C", - "Measured electrical potential value on phase A": "Measured electrical potential value on phase A", - "Measured electrical potential value between phase A and B": "Measured electrical potential value between phase A and B", - "Measured electrical potential value between phase B and C": "Measured electrical potential value between phase B and C", - "Measured electrical potential value between phase C and A": "Measured electrical potential value between phase C and A", - "Instantaneous measured electrical current on phase A": "Instantaneous measured electrical current on phase A", + "Load estimate on this radiator": "Load estimate on this radiator", "Specific for pre-heat running in Zigbee Weekly Schedule mode": "Specific for pre-heat running in Zigbee Weekly Schedule mode", "Status of adaptation run: None (before first run), In Progress, Valve Characteristic Found, Valve Characteristic Lost": "Status of adaptation run: None (before first run), In Progress, Valve Characteristic Found, Valve Characteristic Lost", "Automatic adaptation run enabled (the one during the night)": "Automatic adaptation run enabled (the one during the night)", "Adaptation run control: Initiate Adaptation Run or Cancel Adaptation Run": "Adaptation run control: Initiate Adaptation Run or Cancel Adaptation Run", "Regulation SetPoint Offset in range -2.5°C to 2.5°C in steps of 0.1°C. Value 2.5°C = 25.": "Regulation SetPoint Offset in range -2.5°C to 2.5°C in steps of 0.1°C. Value 2.5°C = 25.", - "Enable LED": "Enable LED", - "Temperature/humidity alarm status": "Temperature/humidity alarm status", - "Temperature scale (°F/°C)": "Temperature scale (°F/°C)", - "OLED brightness when operating the buttons. Default: Medium.": "OLED brightness when operating the buttons. Default: Medium.", - "Key beep volume and vibration level. Default: Low.": "Key beep volume and vibration level. Default: Low.", - "Type of the external floor sensor. Default: NTC 10K/25.": "Type of the external floor sensor. Default: NTC 10K/25.", - "The sensor used for heat control. Default: Room Sensor.": "The sensor used for heat control. Default: Room Sensor.", - "The mode after a power reset. Default: Previous Mode.": "The mode after a power reset. Default: Previous Mode.", - "The tempearatue calibration for the exernal floor sensor, between -3 and 3 in 0.1°C. Default: 0.": "The tempearatue calibration for the exernal floor sensor, between -3 and 3 in 0.1°C. Default: 0.", - "The duration of Dry Mode, between 5 and 100 minutes. Default: 5.": "The duration of Dry Mode, between 5 and 100 minutes. Default: 5.", - "The mode after Dry Mode. Default: Auto.": "The mode after Dry Mode. Default: Auto.", - "The temperature on the display. Default: Room Temperature.": "The temperature on the display. Default: Room Temperature.", - "The threshold to detect window open, between 1.5 and 4 in 0.5 °C. Default: 0 (disabled).": "The threshold to detect window open, between 1.5 and 4 in 0.5 °C. Default: 0 (disabled).", - "Hysteresis setting, between 0.5 and 2 in 0.1 °C. Default: 0.5.": "Hysteresis setting, between 0.5 and 2 in 0.1 °C. Default: 0.5.", - "Room temperature alarm threshold, between 20 and 60 in °C. 0 means disabled. Default: 45.": "Room temperature alarm threshold, between 20 and 60 in °C. 0 means disabled. Default: 45.", - "Animation Effect to use for the LEDs": "Animation Effect to use for the LEDs", - "Calculated by using a hue color circle(value/255*360) If color = 255 display white": "Calculated by using a hue color circle(value/255*360) If color = 255 display white", - "Brightness of the LEDs": "Brightness of the LEDs", - "1-60 is in seconds calculated 61-120 is in minutes calculated by(value-60) Example a value of 65 would be 65-60 = 5 minutes - 120-254 Is in hours calculated by(value-120) Example a value of 132 would be 132-120 would be 12 hours. - 255 Indefinitely": "1-60 is in seconds calculated 61-120 is in minutes calculated by(value-60) Example a value of 65 would be 65-60 = 5 minutes - 120-254 Is in hours calculated by(value-120) Example a value of 132 would be 132-120 would be 12 hours. - 255 Indefinitely", - "Individual LED to target.": "Individual LED to target.", - "Animation Effect to use for the LED": "Animation Effect to use for the LED", - "Brightness of the LED": "Brightness of the LED", - "1-60 is in seconds calculated 61-120 is in minutes calculated by(value-60) Example a value of 65 would be 65-60 = 5 minutes - 120-254 Is in hours calculated by(value-120) Example a value of 132 would be 132-120 would be 12 hours. - 255 Indefinitely": "1-60 is in seconds calculated 61-120 is in minutes calculated by(value-60) Example a value of 65 would be 65-60 = 5 minutes - 120-254 Is in hours calculated by(value-120) Example a value of 132 would be 132-120 would be 12 hours. - 255 Indefinitely", - "This changes the speed that the light dims up when controlled from the hub. A setting of 0 turns the light immediately on. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 25 (2.5s)": "This changes the speed that the light dims up when controlled from the hub. A setting of 0 turns the light immediately on. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 25 (2.5s)", - "This changes the speed that the light dims up when controlled at the switch. A setting of 0 turns the light immediately on. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 127 - Keep in sync with dimmingSpeedUpRemote setting.": "This changes the speed that the light dims up when controlled at the switch. A setting of 0 turns the light immediately on. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 127 - Keep in sync with dimmingSpeedUpRemote setting.", - "This changes the speed that the light turns on when controlled from the hub. A setting of 0 turns the light immediately on. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 127 - Keep in sync with dimmingSpeedUpRemote setting.": "This changes the speed that the light turns on when controlled from the hub. A setting of 0 turns the light immediately on. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 127 - Keep in sync with dimmingSpeedUpRemote setting.", - "This changes the speed that the light turns on when controlled at the switch. A setting of 0 turns the light immediately on. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 127 - Keep in sync with dimmingSpeedUpRemote setting.": "This changes the speed that the light turns on when controlled at the switch. A setting of 0 turns the light immediately on. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 127 - Keep in sync with dimmingSpeedUpRemote setting.", - "This changes the speed that the light dims down when controlled from the hub. A setting of 0 turns the light immediately off. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 127 - Keep in sync with dimmingSpeedUpRemote setting.": "This changes the speed that the light dims down when controlled from the hub. A setting of 0 turns the light immediately off. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 127 - Keep in sync with dimmingSpeedUpRemote setting.", - "This changes the speed that the light dims down when controlled at the switch. A setting of 0 turns the light immediately off. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 127 - Keep in sync with dimmingSpeedUpLocal setting.": "This changes the speed that the light dims down when controlled at the switch. A setting of 0 turns the light immediately off. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 127 - Keep in sync with dimmingSpeedUpLocal setting.", - "This changes the speed that the light turns off when controlled from the hub. A setting of 'instant' turns the light immediately off. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 127 - Keep in sync with rampRateOffToOnRemote setting.": "This changes the speed that the light turns off when controlled from the hub. A setting of 'instant' turns the light immediately off. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 127 - Keep in sync with rampRateOffToOnRemote setting.", - "This changes the speed that the light turns off when controlled at the switch. A setting of 'instant' turns the light immediately off. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 127 - Keep in sync with rampRateOffToOnLocal setting.": "This changes the speed that the light turns off when controlled at the switch. A setting of 'instant' turns the light immediately off. Increasing the value slows down the transition speed. Every number represents 100ms. Default = 127 - Keep in sync with rampRateOffToOnLocal setting.", - "The minimum level that the dimmer allows the bulb to be dimmed to. Useful when the user has an LED bulb that does not turn on or flickers at a lower level.": "The minimum level that the dimmer allows the bulb to be dimmed to. Useful when the user has an LED bulb that does not turn on or flickers at a lower level.", - "The maximum level that the dimmer allows the bulb to be dimmed to.Useful when the user has an LED bulb that reaches its maximum level before the dimmer value of 99 or when the user wants to limit the maximum brightness.": "The maximum level that the dimmer allows the bulb to be dimmed to.Useful when the user has an LED bulb that reaches its maximum level before the dimmer value of 99 or when the user wants to limit the maximum brightness.", - "Inverts the orientation of the switch. Useful when the switch is installed upside down. Essentially up becomes down and down becomes up.": "Inverts the orientation of the switch. Useful when the switch is installed upside down. Essentially up becomes down and down becomes up.", - "Automatically turns the switch off after this many seconds. When the switch is turned on a timer is started. When the timer expires, the switch is turned off. 0 = Auto off is disabled.": "Automatically turns the switch off after this many seconds. When the switch is turned on a timer is started. When the timer expires, the switch is turned off. 0 = Auto off is disabled.", - "Default level for the dimmer when it is turned on at the switch. A setting of 0 means that the switch will return to the level that it was on before it was turned off.": "Default level for the dimmer when it is turned on at the switch. A setting of 0 means that the switch will return to the level that it was on before it was turned off.", - "Default level for the dimmer when it is turned on from the hub. A setting of 0 means that the switch will return to the level that it was on before it was turned off.": "Default level for the dimmer when it is turned on from the hub. A setting of 0 means that the switch will return to the level that it was on before it was turned off.", - "The state the switch should return to when power is restored after power failure. 0 = off, 1-100 = level, 101 = previous.": "The state the switch should return to when power is restored after power failure. 0 = off, 1-100 = level, 101 = previous.", - "Shows the level that the load is at for x number of seconds after the load is adjusted and then returns to the Default LED state. 0 = Stay Off, 1-10 = seconds, 11 = Stay On.": "Shows the level that the load is at for x number of seconds after the load is adjusted and then returns to the Default LED state. 0 = Stay Off, 1-10 = seconds, 11 = Stay On.", - "Power level change that will result in a new power report being sent. The value is a percentage of the previous report.0 = disabled, 1-32767 = 0.1W-3276.7W.": "Power level change that will result in a new power report being sent. The value is a percentage of the previous report.0 = disabled, 1-32767 = 0.1W-3276.7W.", - "Time period between consecutive power & energy reports being sent (in seconds). The timer is reset after each report is sent.": "Time period between consecutive power & energy reports being sent (in seconds). The timer is reset after each report is sent.", - "Energy reports Energy level change which will result in sending a new energy report.0 = disabled, 1-32767 = 0.01kWh-327.67kWh. Default setting: 10 (0.1 kWh)": "Energy reports Energy level change which will result in sending a new energy report.0 = disabled, 1-32767 = 0.01kWh-327.67kWh. Default setting: 10 (0.1 kWh)", - "Set the power type for the device.": "Set the power type for the device.", - "Set the switch configuration.": "Set the switch configuration.", - "This will set the button press delay. 0 = no delay (Disables Button Press Events), 1 = 100ms, 2 = 200ms, 3 = 300ms, etc. up to 900ms. Default = 500ms.": "This will set the button press delay. 0 = no delay (Disables Button Press Events), 1 = 100ms, 2 = 200ms, 3 = 300ms, etc. up to 900ms. Default = 500ms.", - "For use with Smart Bulbs that need constant power and are controlled via commands rather than power.": "For use with Smart Bulbs that need constant power and are controlled via commands rather than power.", - "Set the color of the LED Indicator when the load is on.": "Set the color of the LED Indicator when the load is on.", - "Set the color of the LED Indicator when the load is off.": "Set the color of the LED Indicator when the load is off.", - "Set the intensity of the LED Indicator when the load is on.": "Set the intensity of the LED Indicator when the load is on.", - "Set the intensity of the LED Indicator when the load is off.": "Set the intensity of the LED Indicator when the load is off.", - "Ability to control switch from the wall.": "Ability to control switch from the wall.", - "Ability to control switch from the hub.": "Ability to control switch from the hub.", - "Use device as a Dimmer or an On/Off switch.": "Use device as a Dimmer or an On/Off switch.", - "When the device is in On/Off mode, use full LED bar or just one LED.": "When the device is in On/Off mode, use full LED bar or just one LED.", - "Display progress on LED bar during firmware update.": "Display progress on LED bar during firmware update.", - "0-254:This is the color of the LED strip in a hex representation. 255:Synchronization with default all LED strip color parameter.": "0-254:This is the color of the LED strip in a hex representation. 255:Synchronization with default all LED strip color parameter.", - "Intesity of LED strip when on. 101 = Syncronized with default all LED strip intensity parameter.": "Intesity of LED strip when on. 101 = Syncronized with default all LED strip intensity parameter.", - "Intesity of LED strip when off. 101 = Syncronized with default all LED strip intensity parameter.": "Intesity of LED strip when off. 101 = Syncronized with default all LED strip intensity parameter.", - "Result of a double tap on the up button.": "Result of a double tap on the up button.", - "Remaining battery 2 in %": "Remaining battery 2 in %", - "Illuminance calibration in lux": "Illuminance calibration in lux", - "Temperature calibration (-2.0...2.0)": "Temperature calibration (-2.0...2.0)", - "Enable reporting": "Enable reporting", - "Control mode": "Control mode", - "External switch type": "External switch type", - "External switch status": "External switch status", - "Load detection mode": "Load detection mode", - "Load type": "Load type", - "Load dimmable": "Load dimmable", - "Power supply mode": "Power supply mode", - "Current temperature measured on the external sensor (floor)": "Current temperature measured on the external sensor (floor)", - "The difference between the temperature at which the thermostat switches off, and the temperature at which it switches on again.": "The difference between the temperature at which the thermostat switches off, and the temperature at which it switches on again.", - "Max guarding temperature": "Max guarding temperature", - "Brightness of this backlight LED": "Brightness of this backlight LED", - "Units to show on the display": "Units to show on the display", - "Hooks state": "Hooks state", - "Target position": "Target position", - "The current power source": "The current power source", - "The current charging state": "The current charging state", - "The buzzer can be muted and alarmed manually. During a smoke alarm, the buzzer can be manually muted for 80 seconds (\"mute\") and unmuted (\"alarm\"). The buzzer cannot be pre-muted, as this function only works during a smoke alarm. During the absence of a smoke alarm, the buzzer can be manually alarmed (\"alarm\") and disalarmed (\"mute\")": "The buzzer can be muted and alarmed manually. During a smoke alarm, the buzzer can be manually muted for 80 seconds (\"mute\") and unmuted (\"alarm\"). The buzzer cannot be pre-muted, as this function only works during a smoke alarm. During the absence of a smoke alarm, the buzzer can be manually alarmed (\"alarm\") and disalarmed (\"mute\")", - "Buzzer alarmed (manually)": "Buzzer alarmed (manually)", - "Buzzer muted (manually)": "Buzzer muted (manually)", - "When this option is enabled and a smoke alarm has occurred, then \"linkage_alarm_state\"=true, and when the smoke alarm has ended or the buzzer has been manually muted, then \"linkage_alarm_state\"=false": "When this option is enabled and a smoke alarm has occurred, then \"linkage_alarm_state\"=true, and when the smoke alarm has ended or the buzzer has been manually muted, then \"linkage_alarm_state\"=false", - "\"linkage_alarm\" is triggered": "\"linkage_alarm\" is triggered", - "The buzzer can be muted and alarmed manually. During a gas alarm, the buzzer can be manually muted for 10 minutes (\"mute\"), but cannot be unmuted manually before this timeout expires. The buzzer cannot be pre-muted, as this function only works during a gas alarm. During the absence of a gas alarm, the buzzer can be manually alarmed (\"alarm\") and disalarmed (\"mute\")": "The buzzer can be muted and alarmed manually. During a gas alarm, the buzzer can be manually muted for 10 minutes (\"mute\"), but cannot be unmuted manually before this timeout expires. The buzzer cannot be pre-muted, as this function only works during a gas alarm. During the absence of a gas alarm, the buzzer can be manually alarmed (\"alarm\") and disalarmed (\"mute\")", - "When this option is enabled and a gas alarm has occurred, then \"linkage_alarm_state\"=true, and when the gas alarm has ended or the buzzer has been manually muted, then \"linkage_alarm_state\"=false": "When this option is enabled and a gas alarm has occurred, then \"linkage_alarm_state\"=true, and when the gas alarm has ended or the buzzer has been manually muted, then \"linkage_alarm_state\"=false", - ". Press pairing button right before changing this otherwise it will fail.": ". Press pairing button right before changing this otherwise it will fail.", - "Time interval for detecting actions. Press pairing button right before changing this otherwise it will fail.": "Time interval for detecting actions. Press pairing button right before changing this otherwise it will fail.", - "When this option is enabled then blue LED will blink once when motion is detected. Press pairing button right before changing this otherwise it will fail.": "When this option is enabled then blue LED will blink once when motion is detected. Press pairing button right before changing this otherwise it will fail.", - "The current running mode": "The current running mode", - "When Vacation Mode is active the schedule is disabled and unoccupied_heating_setpoint is used.": "When Vacation Mode is active the schedule is disabled and unoccupied_heating_setpoint is used.", - "Shows the presence duration in minutes": "Shows the presence duration in minutes", - "Shows the duration of the absence in minutes": "Shows the duration of the absence in minutes", - "Turns the onboard LED on or off": "Turns the onboard LED on or off", - "Turn on to learn new IR code": "Turn on to learn new IR code", - "The IR code learned by device": "The IR code learned by device", - "The IR code to send by device": "The IR code to send by device", - "Active power": "Active power", - "Cycle count": "Cycle count", - "Cycle time": "Cycle time", - "Setup or clear top limit": "Setup or clear top limit", - "Setup or clear bottom limit": "Setup or clear bottom limit", - "Favorite position of this cover": "Favorite position of this cover", - "Inverts the cover direction": "Inverts the cover direction", - "There are 8 periods in the schedule in total. 6 for workdays and 2 for holidays. It should be set in the following format for each of the periods: `hours:minutes/temperature`. All periods should be set at once and delimited by the space symbol. For example: `06:00/20.5 08:00/15 11:30/15 13:30/15 17:00/22 22:00/15 06:00/20 22:00/15`. The thermostat doesn't report the schedule by itself even if you change it manually from device": "There are 8 periods in the schedule in total. 6 for workdays and 2 for holidays. It should be set in the following format for each of the periods: `hours:minutes/temperature`. All periods should be set at once and delimited by the space symbol. For example: `06:00/20.5 08:00/15 11:30/15 13:30/15 17:00/22 22:00/15 06:00/20 22:00/15`. The thermostat doesn't report the schedule by itself even if you change it manually from device", - "Screen brightness": "Screen brightness", - "Switches beep sound when interacting with thermostat": "Switches beep sound when interacting with thermostat", - "Antifreeze function": "Antifreeze function", - "Resets all settings to default. Doesn't unpair device.": "Resets all settings to default. Doesn't unpair device.", - "Heating temperature limit": "Heating temperature limit", - "Indicator light status: LOW: Off | MEDIUM: On| HIGH: Inverted": "Indicator light status: LOW: Off | MEDIUM: On| HIGH: Inverted", - "Enable the alarm": "Enable the alarm", - "Silence the siren": "Silence the siren", - "LED indicator mode": "LED indicator mode", - "The threshold to detect window open, between 0.0 and 8.0 in 0.5 °C. Default: 0 (disabled).": "The threshold to detect window open, between 0.0 and 8.0 in 0.5 °C. Default: 0 (disabled).", - "Brightness of the indicator light": "Brightness of the indicator light", - "Operation mode: \"auto\" - toggle by S/W, \"push\" - for momentary S/W, \"latch\" - sync S/W": "Operation mode: \"auto\" - toggle by S/W, \"push\" - for momentary S/W, \"latch\" - sync S/W", - "Enable RF pairing mode each button l1, l2, l3": "Enable RF pairing mode each button l1, l2, l3", - "Indicates whether \"IN\" Sensor of the device detected occupancy": "Indicates whether \"IN\" Sensor of the device detected occupancy", - "Indicates whether \"OUT\" Sensor of the device detected occupancy": "Indicates whether \"OUT\" Sensor of the device detected occupancy", - "Indicates whether \"IN or OUT\" Sensor of the device detected occupancy": "Indicates whether \"IN or OUT\" Sensor of the device detected occupancy", - "Indicates whether \"IN and OUT\" Sensor of the device detected occupancy": "Indicates whether \"IN and OUT\" Sensor of the device detected occupancy", - "Run RF pairing mode": "Run RF pairing mode", - "Counting Freeze ON/OFF, not reporting people value when is ON": "Counting Freeze ON/OFF, not reporting people value when is ON", - "ToF sensor initial": "ToF sensor initial", - "Indicate LED enable/disable, default : enable": "Indicate LED enable/disable, default : enable", - "RF function enable/disable, default : disable": "RF function enable/disable, default : disable", - "Transation interval, default : 400ms": "Transation interval, default : 400ms", - "Fast process enable/disable when people 0 to 1. default : enable": "Fast process enable/disable when people 0 to 1. default : enable", - "Fast process enable/disable when people 1 to 0. default : enable": "Fast process enable/disable when people 1 to 0. default : enable", - "Format 08:00 / 20:00 / 15 / 60 / MoTuWeThFrSaSu / 1 (08:00 = start time 20:00 = end time 15 = irrigation duration in minutes 60 = pause duration in minutes MoTu..= active weekdays 1 = deactivate timer with 0)": "Format 08:00 / 20:00 / 15 / 60 / MoTuWeThFrSaSu / 1 (08:00 = start time 20:00 = end time 15 = irrigation duration in minutes 60 = pause duration in minutes MoTu..= active weekdays 1 = deactivate timer with 0)", - "Format 08:00 / 15 / MoTuWeThFrSaSu / 1 (08:00 = start time 15 = duration in minutes MoTu..= active weekdays 1 = deactivate timer with 0)": "Format 08:00 / 15 / MoTuWeThFrSaSu / 1 (08:00 = start time 15 = duration in minutes MoTu..= active weekdays 1 = deactivate timer with 0)", - "Current water flow in %.": "Current water flow in %.", - "Last watering duration in seconds.": "Last watering duration in seconds.", - "Remaning watering time (for auto shutdown). Updates every minute, and every 10s in the last minute.": "Remaning watering time (for auto shutdown). Updates every minute, and every 10s in the last minute.", - "Set valve to %.": "Set valve to %.", - "Auto shutdown in seconds.": "Auto shutdown in seconds.", - "Set valve to % with auto shutdown.": "Set valve to % with auto shutdown.", - "Directly control the radiator valve. The values range from 0 (valve closed) to 100 (valve fully open)": "Directly control the radiator valve. The values range from 0 (valve closed) to 100 (valve fully open)", - "How hard the motor pushes the valve. The closer to the boiler, the higher the force needed": "How hard the motor pushes the valve. The closer to the boiler, the higher the force needed", - "Transmits with higher power when range is not sufficient": "Transmits with higher power when range is not sufficient", - "Consumed energy": "Consumed energy", - "Indicates if the alarm is triggered on the voltage drop below the limit, allows to reset alarms": "Indicates if the alarm is triggered on the voltage drop below the limit, allows to reset alarms", - "Indicates if the alarm is triggered on the voltage rise above the limit, allows to reset alarms": "Indicates if the alarm is triggered on the voltage rise above the limit, allows to reset alarms", - "Indicates if the alarm is triggered on the active power rise above the limit, allows to reset alarms": "Indicates if the alarm is triggered on the active power rise above the limit, allows to reset alarms", - "Indicates if the alarm is triggered when the consumption energy limit is reached, allows to reset alarms": "Indicates if the alarm is triggered when the consumption energy limit is reached, allows to reset alarms", - "Minimum allowable voltage limit for alarms.": "Minimum allowable voltage limit for alarms.", - "Maximum allowable voltage limit for alarms.": "Maximum allowable voltage limit for alarms.", - "Maximum allowable power limit for alarms.": "Maximum allowable power limit for alarms.", - "Limit of electric energy consumption in kW*h. 0 value represents no limit": "Limit of electric energy consumption in kW*h. 0 value represents no limit", - "RSSI seen by the device": "RSSI seen by the device", - "LQI seen by the device": "LQI seen by the device", - "Maximum Heating set point limit": "Maximum Heating set point limit", - "Minimum Heating set point limit": "Minimum Heating set point limit", - "Maximum Cooling set point limit": "Maximum Cooling set point limit", - "Minimum Cooling point limit": "Minimum Cooling point limit", - "Phase 1 voltage": "Phase 1 voltage", - "Phase 2 voltage": "Phase 2 voltage", - "Phase 3 voltage": "Phase 3 voltage", - "Phase 1 current": "Phase 1 current", - "Phase 2 current": "Phase 2 current", - "Phase 3 current": "Phase 3 current", - "Phase 1 energy": "Phase 1 energy", - "Phase 2 energy": "Phase 2 energy", - "Phase 3 energy": "Phase 3 energy", - "Phase 1 reactive energy": "Phase 1 reactive energy", - "Phase 2 reactive energy": "Phase 2 reactive energy", - "Phase 3 reactive energy": "Phase 3 reactive energy", - "Phase 1 power": "Phase 1 power", - "Phase 2 power": "Phase 2 power", - "Phase 3 power": "Phase 3 power", - "Phase 1 reactive power": "Phase 1 reactive power", - "Phase 2 reactive power": "Phase 2 reactive power", - "Phase 3 reactive power": "Phase 3 reactive power", - "Specifies the initialisation light level. Can not be set lower than \"ballast_minimum_level\"": "Specifies the initialisation light level. Can not be set lower than \"ballast_minimum_level\"", - "Enables the LED when the light is turned off, allowing to \n see the switch in the dark": "Enables the LED when the light is turned off, allowing to \n see the switch in the dark", - "Enables the LED when the light is turned on": "Enables the LED when the light is turned on", - "Controls the behavior when the device is powered on. Works only when the pilot wire is\n deactivated": "Controls the behavior when the device is powered on. Works only when the pilot wire is\n deactivated", - "Enables the LED when the power socket is turned off,\n allowing to see it in the dark": "Enables the LED when the power socket is turned off,\n allowing to see it in the dark", - "Enables the LED when the device is turned on": "Enables the LED when the device is turned on", - "Only shows the transmitted color in X7Y-Mode. Noch changes possible.": "Only shows the transmitted color in X7Y-Mode. Noch changes possible.", - "color temperature value. Fixed values for each key press: 145, 175, 222, 304, 480 mired": "color temperature value. Fixed values for each key press: 145, 175, 222, 304, 480 mired", - "Shows the zigbee2mqtt group bound to the active data point EP(1-4).": "Shows the zigbee2mqtt group bound to the active data point EP(1-4).", - "The number of seconds to wait after unlocking a lock before it automatically locks again. 0=disabled": "The number of seconds to wait after unlocking a lock before it automatically locks again. 0=disabled", - "State": "State", - "Irrigation mode": "Irrigation mode", - "Irrigation Target, duration in minutes or capacity in Litres (depending on mode)": "Irrigation Target, duration in minutes or capacity in Litres (depending on mode)", - "Number of cycle irrigation times, set to 0 for single cycle": "Number of cycle irrigation times, set to 0 for single cycle", - "Cycle irrigation interval": "Cycle irrigation interval", - "Irrigation start time": "Irrigation start time", - "Irrigation end time": "Irrigation end time", - "Last irrigation duration": "Last irrigation duration", - "Water consumed (Litres)": "Water consumed (Litres)", "Adjust Report Delay. Setting the time in minutes, by default 5 minutes": "Adjust Report Delay. Setting the time in minutes, by default 5 minutes", "Enable Temperature Control": "Enable Temperature Control", "Setting High Temperature Border": "Setting High Temperature Border", @@ -846,8 +1186,10 @@ "Set date and time": "Set date and time", "Adjust Report Delay, by default 60 minutes": "Adjust Report Delay, by default 60 minutes", "Adjust Report Delay. Setting the time in minutes, by default 15 minutes": "Adjust Report Delay. Setting the time in minutes, by default 15 minutes", + "State or sensor value": "State or sensor value", + "Transmit power, supported from firmware 20221102. The max for CC1352 is 20 dBm and 5 dBm for CC2652 (any higher value is converted to 5dBm)": "Transmit power, supported from firmware 20221102. The max for CC1352 is 20 dBm and 5 dBm for CC2652 (any higher value is converted to 5dBm)", "Turn the device on or off": "Turn the device on or off", - "The device sends commands with this group ID. Put dvices in this group to control them.": "The device sends commands with this group ID. Put dvices in this group to control them.", + "The device sends commands with this group ID. Put devices in this group to control them.": "The device sends commands with this group ID. Put devices in this group to control them.", "Indicates whether there is an active water leak": "Indicates whether there is an active water leak", "Device mode.": "Device mode.", "Physical input on the device enabled/disabled": "Physical input on the device enabled/disabled", @@ -857,307 +1199,135 @@ "Displayed text on thermostat display (zone). Max 19 characters": "Displayed text on thermostat display (zone). Max 19 characters", "Setpoint in %, use only when the thermostat is in regulator mode.": "Setpoint in %, use only when the thermostat is in regulator mode.", "Current temperature measured from the air sensor": "Current temperature measured from the air sensor", + "The device sends commands with this group ID. Put dvices in this group to control them.": "The device sends commands with this group ID. Put dvices in this group to control them.", + "Specifies the initialisation light level. Can not be set lower than \"ballast_minimum_level\"": "Specifies the initialisation light level. Can not be set lower than \"ballast_minimum_level\"", + "Current temperature measured on the external sensor (floor)": "Current temperature measured on the external sensor (floor)", + "The difference between the temperature at which the thermostat switches off, and the temperature at which it switches on again.": "The difference between the temperature at which the thermostat switches off, and the temperature at which it switches on again.", + "Max guarding temperature": "Max guarding temperature", + "Manual start of siren": "Manual start of siren", + "Prevent changes. `false` = run normally. `true` = prevent from making changes.": "Prevent changes. `false` = run normally. `true` = prevent from making changes.", + "Blinks the built-in LED to make it easier to find the device": "Blinks the built-in LED to make it easier to find the device", + "Device type: ": "Device type: ", + "Module controlled by a rocker switch or a button": "Module controlled by a rocker switch or a button", + "Enable/Disable child lock": "Enable/Disable child lock", + "Shutter motor actual state ": "Shutter motor actual state ", + "Calibration opening time": "Calibration opening time", + "Calibration closing time": "Calibration closing time", + "Mode of the alarm (sound effect)": "Mode of the alarm (sound effect)", + "Siren state": "Siren state", + "Initiate self-test": "Initiate self-test", + "Sensitivity of the smoke alarm": "Sensitivity of the smoke alarm", + "Enable/disable pre-alarm": "Enable/disable pre-alarm", + "Enable/disable heartbeat": "Enable/disable heartbeat", + "Window open": "Window open", + "Specifies the display On-time": "Specifies the display On-time", + "Specifies the brightness value of the display": "Specifies the brightness value of the display", + "Activate Boost heating": "Activate Boost heating", + "Display orientation": "Display orientation", + "Input for remote temperature sensor. Setting this will disable the internal temperature sensor until batteries are removed!": "Input for remote temperature sensor. Setting this will disable the internal temperature sensor until batteries are removed!", + "Temperature displayed on the thermostat": "Temperature displayed on the thermostat", + "Enable/Disable sound alarm on motion": "Enable/Disable sound alarm on motion", + "Operating environment of the thermostat": "Operating environment of the thermostat", + "Set thermostat hysteresis low and high trigger values. (1 = 0.01ºC)": "Set thermostat hysteresis low and high trigger values. (1 = 0.01ºC)", + "Brightness of this backlight LED": "Brightness of this backlight LED", + "Enable or disable the blue backlight LED": "Enable or disable the blue backlight LED", "Swing mode": "Swing mode", "Fan quiet mode": "Fan quiet mode", - "Controls the behavior when the device is powered on after power loss": "Styr beteendet när enheten slås på efter ett strömavbrott", - "Remaining battery in %, can take up to 24 hours before reported.": "Remaining battery in %, can take up to 24 hours before reported.", - "[Soft Switch]: There is a configuration window, opens once an hour on itself, only during which the cube will respond to mode switch. Mode switch will be scheduled to take effect when the window becomes available. You can also give it a throw action (no backward motion) to force a respond! Otherwise, you may open lid and click LINK once to make the cube respond immediately. [Hard Switch]: Open lid and click LINK button 5 times.": "[Soft Switch]: There is a configuration window, opens once an hour on itself, only during which the cube will respond to mode switch. Mode switch will be scheduled to take effect when the window becomes available. You can also give it a throw action (no backward motion) to force a respond! Otherwise, you may open lid and click LINK once to make the cube respond immediately. [Hard Switch]: Open lid and click LINK button 5 times.", - "Triggered action": "Triggered action", - "Start feeding": "Start feeding", - "Feeding source": "Feeding source", - "Feeding size": "Feeding size", - "Portions per day": "Portions per day", - "Weight per day": "Weight per day", - "Indicates wether there is an error with the feeder": "Indicates wether there is an error with the feeder", - "Feeding schedule": "Feeding schedule", - "Led indicator": "Led indicator", - "Feeding mode": "Feeding mode", - "One serving size": "One serving size", - "Portion weight": "Portion weight", - "Indicates if the device is in setup mode (E11)": "Indicates if the device is in setup mode (E11)", - "Is the valve calibrated": "Is the valve calibrated", - "Determines if temperature control abnormalities should be detected": "Determines if temperature control abnormalities should be detected", - "Notifies of a temperature control abnormality if valve detection is enabled (e.g., thermostat not installed correctly, valve failure or incorrect calibration, incorrect link to external temperature sensor)": "Notifies of a temperature control abnormality if valve detection is enabled (e.g., thermostat not installed correctly, valve failure or incorrect calibration, incorrect link to external temperature sensor)", - "When being ON, the thermostat will change its state based on your settings": "When being ON, the thermostat will change its state based on your settings", - "Smart schedule configuration (default: mon,tue,wed,thu,fri|8:00,24.0|18:00,17.0|23:00,22.0|8:00,22.0)": "Smart schedule configuration (default: mon,tue,wed,thu,fri|8:00,24.0|18:00,17.0|23:00,22.0|8:00,22.0)", - "Pulling curtains by hand starts the motor": "Pulling curtains by hand starts the motor", - "Calibrate the position limits": "Calibrate the position limits", - "Lock the curtain driver hooks": "Lock the curtain driver hooks", - "Most recent region event. Event template is \"region__\", where is region number (1-10), is one of \"enter\", \"leave\", \"occupied\", \"unoccupied\". \"enter\" / \"leave\" events are usually triggered first, followed by \"occupied\" / \"unoccupied\" after a couple of seconds.": "Most recent region event. Event template is \"region__\", where is region number (1-10), is one of \"enter\", \"leave\", \"occupied\", \"unoccupied\". \"enter\" / \"leave\" events are usually triggered first, followed by \"occupied\" / \"unoccupied\" after a couple of seconds.", - "Definition of a new region to be added (or replace existing one). Creating or modifying a region requires you to define which zones of a 7x4 detection grid should be active for that zone. Regions can overlap, meaning that a zone can be defined in more than one region (eg. \"zone x = 1 & y = 1\" can be added to region 1 & 2). \"Zone x = 1 & y = 1\" is the nearest zone on the right (from sensor's perspective, along the detection path).": "Definition of a new region to be added (or replace existing one). Creating or modifying a region requires you to define which zones of a 7x4 detection grid should be active for that zone. Regions can overlap, meaning that a zone can be defined in more than one region (eg. \"zone x = 1 & y = 1\" can be added to region 1 & 2). \"Zone x = 1 & y = 1\" is the nearest zone on the right (from sensor's perspective, along the detection path).", - "Region definition to be deleted from the device.": "Region definition to be deleted from the device.", - "Decoupled mode for top button": "Decoupled mode for top button", - "Decoupled mode for bottom button": "Decoupled mode for bottom button", - "Do not disturb mode, when enabled this function will keep the light OFF after a power outage": "Do not disturb mode, when enabled this function will keep the light OFF after a power outage", - "Specifies the amount of time, in units of 0.1 seconds, which will be used during a transition to either the on or off state, when an on/off/toggle command of the on/off cluster is used to turn the light on or off": "Specifies the amount of time, in units of 0.1 seconds, which will be used during a transition to either the on or off state, when an on/off/toggle command of the on/off cluster is used to turn the light on or off", - "Specifies the level that shall be applied, when an on/toggle command causes the light to turn on.": "Specifies the level that shall be applied, when an on/toggle command causes the light to turn on.", - "Defines if you can send a brightness change without to turn on the light": "Defines if you can send a brightness change without to turn on the light", - "Specifies the initial level to be applied after the device is supplied with power": "Specifies the initial level to be applied after the device is supplied with power", - "Specifies the minimum level that shall be applied, when an on/toggle command causes the light to turn on. When this attribute is set to the invalid value (255) this feature is disabled and standard rules apply: The light will either return to the previously active level (before it was turned off) if the OnLevel attribute is set to the invalid value (255/previous); or to the specified value of the OnLevel attribute if this value is in the range 0…254. Otherwise, if the MinimumOnLevel is in the range 0…254, the light will be set to the the previously active level (before it was turned off), or the value specified here, whichever is the larger value. For example, if the previous level was 30 and the MinimumOnLevel was 40 then the light would turn on and move to level 40. Conversely, if the previous level was 50, and the MinimumOnLevel was 40, then the light would turn on and move to level 50.": "Specifies the minimum level that shall be applied, when an on/toggle command causes the light to turn on. When this attribute is set to the invalid value (255) this feature is disabled and standard rules apply: The light will either return to the previously active level (before it was turned off) if the OnLevel attribute is set to the invalid value (255/previous); or to the specified value of the OnLevel attribute if this value is in the range 0…254. Otherwise, if the MinimumOnLevel is in the range 0…254, the light will be set to the the previously active level (before it was turned off), or the value specified here, whichever is the larger value. For example, if the previous level was 30 and the MinimumOnLevel was 40 then the light would turn on and move to level 40. Conversely, if the previous level was 50, and the MinimumOnLevel was 40, then the light would turn on and move to level 50.", - "Turn the light of the alarm ON/OFF": "Turn the light of the alarm ON/OFF", - "Duration of the alarm": "Duration of the alarm", - "Volume of the alarm": "Volume of the alarm", - "Max ON time in seconds": "Max ON time in seconds", - "Speed off the fan": "Speed off the fan", - "State of the battery": "State of the battery", - "Max on time in minutes": "Man on time in minutes", - "Sum of consumed energy (phase A)": "Sum of consumed energy (phase A)", - "Sum of consumed energy (phase B)": "Sum of consumed energy (phase B)", - "Sum of consumed energy (phase C)": "Sum of consumed energy (phase C)", - "Measured electrical potential value (phase A)": "Measured electrical potential value (phase A)", - "Measured electrical potential value (phase B)": "Measured electrical potential value (phase B)", - "Measured electrical potential value (phase C)": "Measured electrical potential value (phase C)", - "Instantaneous measured power (phase A)": "Instantaneous measured power (phase A)", - "Instantaneous measured power (phase B)": "Instantaneous measured power (phase B)", - "Instantaneous measured power (phase C)": "Instantaneous measured power (phase C)", - "Instantaneous measured electrical current (phase A)": "Instantaneous measured electrical current (phase A)", - "Instantaneous measured electrical current (phase B)": "Instantaneous measured electrical current (phase B)", - "Instantaneous measured electrical current (phase C)": "Instantaneous measured electrical current (phase C)", - "Instantaneous measured power factor (phase A)": "Instantaneous measured power factor (phase A)", - "Instantaneous measured power factor (phase B)": "Instantaneous measured power factor (phase B)", - "Instantaneous measured power factor (phase C)": "Instantaneous measured power factor (phase C)", - "Type of the switch": "Type of the switch", - "Type of light attached to the device": "Type of light attached to the device", - "Measured gas concentration": "Measured gas concentration", - "Temperature unit": "Temperature unit", - "Temperature Report interval": "Temperature Report interval", - "Sensitivity of the radar": "Sensitivity of the radar", - "Presets for sensitivity for presence and movement": "Presets for sensitivity for presence and movement", - "Fall sensitivity of the radar": "Fall sensitivity of the radar", - "Tumble alarm time": "Tumble alarm time", - "Fall down status": "Fall down status", - "Static dwell alarm": "Static dwell alarm", - "Intensity of the backlight": "Intensity of the backlight", - "Mode of the backlight": "Mode of the backlight", - "Sum of produced energy": "Sum of produced energy", - "Fault status of the device (clear = nothing)": "Fault status of the device (clear = nothing)", - "State of threshold_1": "State of threshold_1", - "OFF - alarm only, ON - relay will be off when threshold reached": "OFF - alarm only, ON - relay will be off when threshold reached", - "Can be in Volt or Ampere depending on threshold setting. Setup the value on the device": "Can be in Volt or Ampere depending on threshold setting. Setup the value on the device", - "State of threshold_2": "State of threshold_2", - "Setup value on the device": "Setup value on the device", - "Turn ON to clear last the fault": "Turn ON to clear last the fault", - "Meter ID (ID of device)": "Meter ID (ID of device)", - "Parts per million of smoke detected": "Parts per million of smoke detected", - "Indicates a fault with the device": "Indicates a fault with the device", - "Thermostat in error state": "Thermostat in error state", - "Schedule for monday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"": "Schedule for monday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"", - "Schedule for tuesday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"": "Schedule for tuesday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"", - "Schedule for wednesday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"": "Schedule for wednesday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"", - "Schedule for thursday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"": "Schedule for thursday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"", - "Schedule for friday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"": "Schedule for friday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"", - "Schedule for saturday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"": "Schedule for saturday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"", - "Schedule for sunday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"": "Schedule for sunday, format: \"HH:MM/C HH:MM/C HH:MM/C HH:MM/C\"", - "If the heat sink is not fully opened within two weeks or is not used for a long time, the valve will be blocked due to silting up and the heat sink will not be able to be used. To ensure normal use of the heat sink, the controller will automatically open the valve fully every two weeks. It will run for 30 seconds per time with the screen displaying \"Ad\", then return to its normal working state again.": "If the heat sink is not fully opened within two weeks or is not used for a long time, the valve will be blocked due to silting up and the heat sink will not be able to be used. To ensure normal use of the heat sink, the controller will automatically open the valve fully every two weeks. It will run for 30 seconds per time with the screen displaying \"Ad\", then return to its normal working state again.", - "When the room temperature is lower than 5 °C, the valve opens; when the temperature rises to 8 °C, the valve closes.": "When the room temperature is lower than 5 °C, the valve opens; when the temperature rises to 8 °C, the valve closes.", - "If NTC is damaged, \"Er\" will be on the TRV display.": "If NTC is damaged, \"Er\" will be on the TRV display.", - "When Anti-Freezing function is activated, the temperature in the house is kept at 8 °C.": "When Anti-Freezing function is activated, the temperature in the house is kept at 8 °C.", - "Only for Homeassistant": "Only for Home Assistant", - "When Anti-Freezing function is activated, the temperature in the house is kept at 8 °C.When Anti-Freezing function is activated, the temperature in the house is kept at 8 °C, the device display \"AF\".press the pair button to cancel.": "When Anti-Freezing function is activated, the temperature in the house is kept at 8 °C.When Anti-Freezing function is activated, the temperature in the house is kept at 8 °C, the device display \"AF\".press the pair button to cancel.", - "The holiday mode will automatically start at the set time starting point and run the holiday temperature. Can be defined in the following format: `startYear/startMonth/startDay startHours:startMinutes | endYear/endMonth/endDay endHours:endMinutes`. For example: `2022/10/01 16:30 | 2022/10/21 18:10`. After the end of holiday mode, it switches to \"auto\" mode and uses schedule.": "The holiday mode will automatically start at the set time starting point and run the holiday temperature. Can be defined in the following format: `startYear/startMonth/startDay startHours:startMinutes | endYear/endMonth/endDay endHours:endMinutes`. For example: `2022/10/01 16:30 | 2022/10/21 18:10`. After the end of holiday mode, it switches to \"auto\" mode and uses schedule.", - "`mon_sun` - schedule for Monday used for each day (define it only for Monday). `mon_fri+sat+sun` - schedule for workdays used from Monday (define it only for Monday), Saturday and Sunday are defined separately. `separate` - schedule for each day is defined separately.": "`mon_sun` - schedule for Monday used for each day (define it only for Monday). `mon_fri+sat+sun` - schedule for workdays used from Monday (define it only for Monday), Saturday and Sunday are defined separately. `separate` - schedule for each day is defined separately.", - "Schedule will work with \"auto\" preset. In this mode, the device executes a preset week programming temperature time and temperature. Before using these properties, check `working_day` property. Each day can contain up to 10 segments. At least 1 segment should be defined. Different count of segments can be defined for each day, e.g., 3 segments for Monday, 5 segments for Thursday, etc. It should be defined in the following format: `hours:minutes/temperature`. Minutes can be only tens, i.e., 00, 10, 20, 30, 40, 50. Segments should be divided by space symbol. Each day should end with the last segment of 24:00. Examples: `04:00/20 08:30/22 10:10/18 18:40/24 22:50/19.5`; `06:00/21.5 17:20/26 24:00/18`. The temperature will be set from the beginning/start of one period and until the next period, e.g., `04:00/20 24:00/22` means that from 00:00 to 04:00 temperature will be 20 degrees and from 04:00 to 00:00 temperature will be 22 degrees.": "Schedule will work with \"auto\" preset. In this mode, the device executes a preset week programming temperature time and temperature. Before using these properties, check `working_day` property. Each day can contain up to 10 segments. At least 1 segment should be defined. Different count of segments can be defined for each day, e.g., 3 segments for Monday, 5 segments for Thursday, etc. It should be defined in the following format: `hours:minutes/temperature`. Minutes can be only tens, i.e., 00, 10, 20, 30, 40, 50. Segments should be divided by space symbol. Each day should end with the last segment of 24:00. Examples: `04:00/20 08:30/22 10:10/18 18:40/24 22:50/19.5`; `06:00/21.5 17:20/26 24:00/18`. The temperature will be set from the beginning/start of one period and until the next period, e.g., `04:00/20 24:00/22` means that from 00:00 to 04:00 temperature will be 20 degrees and from 04:00 to 00:00 temperature will be 22 degrees.", - "Schedule for monday, format: \"HH:MM/C\"": "Schedule for monday, format: \"HH:MM/C\"", - "Schedule for tuesday, format: \"HH:MM/C\"": "Schedule for tuesday, format: \"HH:MM/C\"", - "Schedule for wednesday, format: \"HH:MM/C\"": "Schedule for wednesday, format: \"HH:MM/C\"", - "Schedule for thursday, format: \"HH:MM/C\"": "Schedule for thursday, format: \"HH:MM/C\"", - "Schedule for friday, format: \"HH:MM/C\"": "Schedule for friday, format: \"HH:MM/C\"", - "Schedule for saturday, format: \"HH:MM/C\"": "Schedule for saturday, format: \"HH:MM/C\"", - "Schedule for sunday, format: \"HH:MM/C\"": "Schedule for sunday, format: \"HH:MM/C\"", - "The current data request from the device.": "The current data request from the device.", - "Reverse the motor direction": "Reverse the motor direction", - "Mode of the indicator light": "Mode of the indicator light", - "Countdown to turn device off after a certain time": "Countdown to turn device off after a certain time", - "Indicates whether the device is being self-tested": "Indicates whether the device is being self-tested", - "Result of the self-test": "Result of the self-test", - "Silence the alarm": "Silence the alarm", - "Ringtone of the alarm": "Ringtone of the alarm", - "Alarm time": "Alarm time", - "Indicates sensor preheat is active": "Indicates sensor preheat is active", - "Indicates whether a fault was detected": "Indicates whether a fault was detected", - "Automatic calibration of the CO2 sensor. If ON, the CO2 sensor will automatically calibrate every 7 days. (MH-Z19B sensor)": "Automatic calibration of the CO2 sensor. If ON, the CO2 sensor will automatically calibrate every 7 days. (MH-Z19B sensor)", - "Ventilate the room for 20 minutes, turn on manual calibration, and turn it off after one second. After about 5 minutes the CO2 sensor will show 400ppm. Calibration completed. (MH-Z19B sensor)": "Ventilate the room for 20 minutes, turn on manual calibration, and turn it off after one second. After about 5 minutes the CO2 sensor will show 400ppm. Calibration completed. (MH-Z19B sensor)", - "TRV valve position in %.": "TRV valve position in %.", - "Automatically turn off load after x seconds": "Automatically turn off load after x seconds", - "Control status LED color when load ON": "Control status LED color when load ON", - "Control status LED color when load OFF": "Control status LED color when load OFF", - "Control status LED intensity when load ON": "Control status LED intensity when load ON", - "Control status LED intensity when load OFF": "Control status LED intensity when load OFF", - "Mode of the thermostat": "Mode of the thermostat", - "Occupancy state of the thermostat": "Occupancy state of the thermostat", - "Showing outdoor temperature on secondary display": "Showing outdoor temperature on secondary display", - "The temperature format displayed on the thermostat screen": "The temperature format displayed on the thermostat screen", - "The time format featured on the thermostat display": "The time format featured on the thermostat display", - "Enables or disables the device’s buttons": "Enables or disables the device’s buttons", - "The display backlight behavior": "The display backlight behavior", - "The power in watts of the electrical load connected to the device": "The power in watts of the electrical load connected to the device", - "Control mode using floor or ambient temperature": "Control mode using floor or ambient temperature", - "The maximum floor temperature limit of the floor when in ambient control mode": "The maximum floor temperature limit of the floor when in ambient control mode", - "The minimum floor temperature limit of the floor when in ambient control mode": "The minimum floor temperature limit of the floor when in ambient control mode", - "The maximum ambient temperature limit when in floor control mode": "The maximum ambient temperature limit when in floor control mode", - "The floor sensor": "The floor sensor", - "The length of the control cycle according to the type of load connected to the thermostats": "The length of the control cycle according to the type of load connected to the thermostats", - "The length of the control cycle according to the type of auxiliary load connected to the thermostats": "The length of the control cycle according to the type of auxiliary load connected to the thermostats", - "This function prevents the seizure of the pump": "This function prevents the seizure of the pump", - "The power in watts of the heater connected to the auxiliary output of the thermostat": "The power in watts of the heater connected to the auxiliary output of the thermostat", - "The length of the control cycle: 15_sec=normal 15_min=fan": "The length of the control cycle: 15_sec=normal 15_min=fan", - "Transaction interval, default : 400ms": "Transaction interval, default : 400ms", - "Flash green tag for x seconds": "Flash green tag for x seconds", - "Input (command) and output (control) behavior of actuator": "Input (command) and output (control) behavior of actuator", - "Output signal when operating in fil pilote mode (fip_fip)": "Output signal when operating in fil pilote mode (fip_fip)", - "Viewing/display direction, `false` normal or `true` upside-down": "Viewing/display direction, `false` normal or `true` upside-down", - "Scheduled change of the setpoint. Alternative method for changing the setpoint. In the opposite to occupied_heating_setpoint it does not trigger an aggressive response from the actuator. (more suitable for scheduled changes)": "Scheduled change of the setpoint. Alternative method for changing the setpoint. In the opposite to occupied_heating_setpoint it does not trigger an aggressive response from the actuator. (more suitable for scheduled changes)", - "The temperature sensor of the TRV is — due to its design — relatively close to the heat source (i.e. the hot water in the radiator). Thus there are situations where the `local_temperature` measured by the TRV is not accurate enough: If the radiator is covered behind curtains or furniture, if the room is rather big, or if the radiator itself is big and the flow temperature is high, then the temperature in the room may easily diverge from the `local_temperature` measured by the TRV by 5°C to 8°C. In this case you might choose to use an external room sensor and send the measured value of the external room sensor to the `External_measured_room_sensor` property.The way the TRV operates on the `External_measured_room_sensor` depends on the setting of the `Radiator_covered` property: If `Radiator_covered` is `false` (Auto Offset Mode): You *must* set the `External_measured_room_sensor` property *at least* every 3 hours. After 3 hours the TRV disables this function and resets the value of the `External_measured_room_sensor` property to -8000 (disabled). You *should* set the `External_measured_room_sensor` property *at most* every 30 minutes or every 0.1K change in measured room temperature.If `Radiator_covered` is `true` (Room Sensor Mode): You *must* set the `External_measured_room_sensor` property *at least* every 30 minutes. After 35 minutes the TRV disables this function and resets the value of the `External_measured_room_sensor` property to -8000 (disabled). You *should* set the `External_measured_room_sensor` property *at most* every 5 minutes or every 0.1K change in measured room temperature.": "The temperature sensor of the TRV is — due to its design — relatively close to the heat source (i.e. the hot water in the radiator). Thus there are situations where the `local_temperature` measured by the TRV is not accurate enough: If the radiator is covered behind curtains or furniture, if the room is rather big, or if the radiator itself is big and the flow temperature is high, then the temperature in the room may easily diverge from the `local_temperature` measured by the TRV by 5°C to 8°C. In this case you might choose to use an external room sensor and send the measured value of the external room sensor to the `External_measured_room_sensor` property.The way the TRV operates on the `External_measured_room_sensor` depends on the setting of the `Radiator_covered` property: If `Radiator_covered` is `false` (Auto Offset Mode): You *must* set the `External_measured_room_sensor` property *at least* every 3 hours. After 3 hours the TRV disables this function and resets the value of the `External_measured_room_sensor` property to -8000 (disabled). You *should* set the `External_measured_room_sensor` property *at most* every 30 minutes or every 0.1K change in measured room temperature.If `Radiator_covered` is `true` (Room Sensor Mode): You *must* set the `External_measured_room_sensor` property *at least* every 30 minutes. After 35 minutes the TRV disables this function and resets the value of the `External_measured_room_sensor` property to -8000 (disabled). You *should* set the `External_measured_room_sensor` property *at most* every 5 minutes or every 0.1K change in measured room temperature.", - "Controls whether the TRV should solely rely on an external room sensor or operate in offset mode. `false` = Auto Offset Mode (use this e.g. for exposed radiators) or `true` = Room Sensor Mode (use this e.g. for covered radiators). Please note that this flag only controls how the TRV operates on the value of `External_measured_room_sensor`; only setting this flag without setting the `External_measured_room_sensor` has no (noticable?) effect.": "Controls whether the TRV should solely rely on an external room sensor or operate in offset mode. `false` = Auto Offset Mode (use this e.g. for exposed radiators) or `true` = Room Sensor Mode (use this e.g. for covered radiators). Please note that this flag only controls how the TRV operates on the value of `External_measured_room_sensor`; only setting this flag without setting the `External_measured_room_sensor` has no (noticable?) effect.", - "List of RGB HEX colors": "List of RGB HEX colors", - "Humidity Report interval": "Humidity Report interval", - "Humidity sensitivity": "Humidity sensitivity", - "LED State": "LED State", - "Hysteresis setting, default: 0.5": "Hysteresis setting, default: 0.5", - "Adjust brightness of display values 1(Low)-7(High)": "Adjust brightness of display values 1(Low)-7(High)", - "Enable / Disable display auto off": "Enable / Disable display auto off", - "The mode after a power reset. Default: Previous Mode. See instructions for information about manual": "The mode after a power reset. Default: Previous Mode. See instructions for information about manual", - "Turn on/off window check mode": "Turn on/off window check mode", - "Hysteresis setting, between 0.5 and 5 in 0.1 °C. Default: 0.5.": "Hysteresis setting, between 0.5 and 5 in 0.1 °C. Default: 0.5.", - "Floor temperature over heating threshold, range is 0-35, unit is 1ºC, 0 means this function is disabled, default value is 27.": "Floor temperature over heating threshold, range is 0-35, unit is 1ºC, 0 means this function is disabled, default value is 27.", - "Maximum temperature limit. Cuts the thermostat out regardless of air temperature if the external floor sensor exceeds this temperature. Only used by the thermostat when in AL sensor mode.": "Maximum temperature limit. Cuts the thermostat out regardless of air temperature if the external floor sensor exceeds this temperature. Only used by the thermostat when in AL sensor mode.", - "Minimum temperature limit for frost protection. Turns the thermostat on regardless of setpoint if the tempreature drops below this.": "Minimum temperature limit for frost protection. Turns the thermostat on regardless of setpoint if the tempreature drops below this.", - "Time of day and setpoint to use when in program mode": "Time of day and setpoint to use when in program mode", - "Enables the LED when the light is turned off, allowing to see the switch in the dark": "Enables the LED when the light is turned off, allowing to see the switch in the dark", - "Enables the LED when the power socket is turned off,\n allowing to see it in the dark": "Enables the LED when the power socket is turned off, allowing to see it in the dark", - "Switch: allow manual on/off, auto uses contact's C1/C2 wired actions for Peak/Off-Peak electricity rates": "Switch: allow manual on/off, auto uses contact's C1/C2 wired actions for Peak/Off-Peak electricity rates", - "Off/auto/on (override) (works only if device is set to \"auto\" mode)": "Off/auto/on (override) (works only if device is set to \"auto\" mode)", - "Default level for the dimmer when it is turned on at the switch. A setting of 255 means that the switch will return to the level that it was on before it was turned off.": "Default level for the dimmer when it is turned on at the switch. A setting of 255 means that the switch will return to the level that it was on before it was turned off.", - "Default level for the dimmer when it is turned on from the hub. A setting of 255 means that the switch will return to the level that it was on before it was turned off.": "Default level for the dimmer when it is turned on from the hub. A setting of 255 means that the switch will return to the level that it was on before it was turned off.", - "The state the switch should return to when power is restored after power failure. 0 = off, 1-254 = level, 255 = previous.": "The state the switch should return to when power is restored after power failure. 0 = off, 1-254 = level, 255 = previous.", - "Percent power level change that will result in a new power report being sent. 0 = Disabled": "Percent power level change that will result in a new power report being sent. 0 = Disabled", - "This will set the button press delay. 0 = no delay (Disables Button Press Events),Default = 500ms.": "This will set the button press delay. 0 = no delay (Disables Button Press Events),Default = 500ms.", - "In neutral on/off setups, the default is to have a clicking sound to notify you that the relay is open or closed. You may disable this sound by creating a, “simulated” on/off where the switch only will turn onto 100 or off to 0.": "In neutral on/off setups, the default is to have a clicking sound to notify you that the relay is open or closed. You may disable this sound by creating a, “simulated” on/off where the switch only will turn onto 100 or off to 0.", - "Double-Tap the Config button to clear notifications.": "Double-Tap the Config button to clear notifications.", - "Sensirion VOC index": "Sensirion VOC index", - "Irrigation target, duration in seconds or capacity in litres (depending on mode)": "Irrigation target, duration in seconds or capacity in litres (depending on mode)", - "Last irrigation start time (GMT)": "Last irrigation start time (GMT)", - "Last irrigation end time (GMT)": "Last irrigation end time (GMT)", - "Last irrigation water consumption": "Last irrigation water consumption", - "Indicates whether the device detected rainfall": "Indicates whether the device detected rainfall", - "State of input 1": "State of input 1", - "State of input 2": "State of input 2", - "State of input 3": "State of input 3", - "State of input 4": "State of input 4", - "On/off state of switch 1": "On/off state of switch 1", - "On/off state of switch 2": "On/off state of switch 2", - "Enable/disable LED on motion": "Enable/disable LED on motion", - "Transmit power, supported from firmware 20221102. The max for CC1352 is 20 dBm and 5 dBm for CC2652 (any higher value is converted to 5dBm)": "Transmit power, supported from firmware 20221102. The max for CC1352 is 20 dBm and 5 dBm for CC2652 (any higher value is converted to 5dBm)", - "The device sends commands with this group ID. Put devices in this group to control them.": "The device sends commands with this group ID. Put devices in this group to control them.", - "Blinks the built-in LED to make it easier to find the device": "Blinks the built-in LED to make it easier to find the device", - "Mode of the alarm (sound effect)": "Mode of the alarm (sound effect)", - "Siren state": "Siren state", - "Initiate self-test": "Initiate self-test", - "Sensitivity of the smoke alarm": "Sensitivity of the smoke alarm", - "Enable/disable pre-alarm": "Enable/disable pre-alarm", - "Enable/disable heartbeat": "Enable/disable heartbeat", - "Activate Boost heating": "Activate Boost heating", - "Window open": "Window open", - "Display orientation": "Display orientation", - "Specifies the diplay On-time": "Specifies the diplay On-time", - "Specifies the brightness value of the display": "Specifies the brightness value of the display", - "Operating environment of the thermostat": "Operating environment of the thermostat" + "Ac louver position of this device": "Ac louver position of this device", + "Sensitivity of the motion sensor": "Sensitivity of the motion sensor" }, "featureNames": { - "action": "Action", - "angle_x": "Angle X", - "angle_y": "Angle Y", - "angle_z": "Angle Z", + "undefined": "", + "state": "State", "brightness": "Brightness", - "co2": "CO 2", "color_temp": "Color Temp", - "color_xy": "Color Xy", - "contact": "Contact", - "humidity": "Humidity", - "illuminance": "Illuminance", - "occupancy": "Occupancy", - "pressure": "Pressure", - "soil_moisture": "Soil Moisture", - "state": "State", - "temperature": "Temperature", - "tamper": "Tamper", - "action_angle": "Action Angle", - "action_from_side": "Action From Side", - "action_side": "Action Side", - "action_to_side": "Action To Side", - "alarm": "Alarm", - "away_mode": "Away Mode", - "calibration_time": "Calibration Time", - "carbon_monoxide": "Carbon Monoxide", - "child_lock": "Child Lock", - "color_hs": "Color Hs", "color_temp_startup": "Color Temp Startup", - "consumer_connected": "Consumer Connected", - "current": "Current", - "current_heating_setpoint": "Current Heating Setpoint", - "current_level_startup": "Current Level Startup", - "device_temperature": "Device Temperature", - "energy": "Energy", - "friday_schedule": "Friday Schedule", - "heating": "Heating", - "holidays_schedule": "Holidays Schedule", - "level_config": "Level Config", - "local_temperature": "Local Temperature", - "local_temperature_calibration": "Local Temperature Calibration", - "monday_schedule": "Monday Schedule", - "motion_direction": "Motion Direction", - "motion_speed": "Motion Speed", - "motor_speed": "Motor Speed", - "moving": "Moving", - "on_off_transition_time": "On Off Transition Time", - "options": "Options", - "position": "Position", - "power": "Power", - "presence": "Presence", - "preset": "Preset", - "programming_mode": "Programming Mode", - "saturday_schedule": "Saturday Schedule", - "smoke": "Smoke", - "smoke_density": "Smoke Density", - "sunday_schedule": "Sunday Schedule", - "system_mode": "System Mode", - "thursday_schedule": "Thursday Schedule", - "tuesday_schedule": "Tuesday Schedule", - "vibration": "Vibration", - "voltage": "Voltage", - "water_leak": "Water Leak", - "week": "Week", - "window": "Window", - "workdays_schedule": "Workdays Schedule", - "operation_mode": "Operation Mode", - "pi_heating_demand": "Pi Heating Demand", - "undefined": "undefined", + "color_xy": "Color Xy", "x": "X", "y": "Y", "effect": "Effect", + "power_on_behavior": "Power On Behavior", "linkquality": "Linkquality", "occupied_heating_setpoint": "Occupied Heating Setpoint", + "occupied_cooling_setpoint": "Occupied Cooling Setpoint", + "local_temperature": "Local Temperature", + "system_mode": "System Mode", "running_state": "Running State", + "local_temperature_calibration": "Local Temperature Calibration", + "fan_mode": "Fan Mode", + "position": "Position", + "motor_direction": "Motor Direction", + "border": "Border", + "options": "Options", + "motor_speed": "Motor Speed", + "motor_working_mode": "Motor Working Mode", + "percent_state": "Percent State", + "mode": "Mode", + "power_outage_memory": "Power Outage Memory", "battery": "Battery", + "action": "Action", + "do_not_disturb": "Do Not Disturb", + "color_power_on_behavior": "Color Power On Behavior", + "power": "Power", + "battery_low": "Battery Low", + "color_hs": "Color Hs", + "hue": "Hue", + "saturation": "Saturation", "lock_state": "Lock State", "pin_code": "Pin Code", "user": "User", "user_type": "User Type", "user_enabled": "User Enabled", + "action_source_name": "Action Source Name", + "action_user": "Action User", + "auto_relock_time": "Auto Relock Time", + "sound_volume": "Sound Volume", + "operation_mode": "Operation Mode", + "device_temperature": "Device Temperature", + "flip_indicator_light": "Flip Indicator Light", + "energy": "Energy", + "voltage": "Voltage", + "led_disabled_night": "Led Disabled Night", + "power_outage_count": "Power Outage Count", + "side": "Side", + "action_from_side": "Action From Side", + "action_angle": "Action Angle", + "feed": "Feed", + "feeding_source": "Feeding Source", + "feeding_size": "Feeding Size", + "portions_per_day": "Portions Per Day", + "weight_per_day": "Weight Per Day", + "error": "Error", + "schedule": "Schedule", + "serving_size": "Serving Size", + "portion_weight": "Portion Weight", + "setup": "Setup", + "preset": "Preset", + "sensor": "Sensor", + "calibrated": "Calibrated", + "window_open": "Window Open", + "valve_alarm": "Valve Alarm", + "away_preset_temperature": "Away Preset Temperature", + "schedule_settings": "Schedule Settings", "click_mode": "Click Mode", "action_rotation_angle": "Action Rotation Angle", "action_rotation_angle_speed": "Action Rotation Angle Speed", "action_rotation_percent": "Action Rotation Percent", "action_rotation_percent_speed": "Action Rotation Percent Speed", "action_rotation_time": "Action Rotation Time", - "power_outage_memory": "Power Outage Memory", - "led_disabled_night": "Led Disabled Night", + "current": "Current", "button_lock": "Button Lock", "overload_protection": "Overload Protection", + "contact": "Contact", "button_switch_mode": "Button Switch Mode", + "illuminance": "Illuminance", "illuminance_lux": "Illuminance Lux", "detection_period": "Detection Period", + "consumer_connected": "Consumer Connected", + "temperature": "Temperature", + "humidity": "Humidity", "voc": "Voc", + "display_unit": "Display Unit", "mode_switch": "Mode Switch", "standby_enabled": "Standby Enabled", "theme": "Theme", @@ -1182,32 +1352,93 @@ "switch_3_icon": "Switch 3 Icon", "switch_3_text": "Switch 3 Text", "switch_type": "Switch Type", - "hue": "Hue", - "saturation": "Saturation", "reverse": "Reverse", - "battery_low": "Battery Low", "interlock": "Interlock", + "hand_open": "Hand Open", + "limits_calibration": "Limits Calibration", + "motor_state": "Motor State", + "running": "Running", + "hooks_lock": "Hooks Lock", + "hooks_state": "Hooks State", + "target_position": "Target Position", + "power_source": "Power Source", + "charging": "Charging", + "charging_status": "Charging Status", + "vibration": "Vibration", "strength": "Strength", "sensitivity": "Sensitivity", + "angle_x": "Angle X", + "angle_y": "Angle Y", + "angle_z": "Angle Z", "inserted": "Inserted", - "gas": "Gas", - "gas_density": "Gas Density", + "smoke": "Smoke", + "smoke_density": "Smoke Density", + "smoke_density_dbm": "Smoke Density Dbm", "selftest": "Selftest", "test": "Test", + "buzzer": "Buzzer", + "buzzer_manual_alarm": "Buzzer Manual Alarm", + "buzzer_manual_mute": "Buzzer Manual Mute", + "heartbeat_indicator": "Heartbeat Indicator", + "linkage_alarm": "Linkage Alarm", + "linkage_alarm_state": "Linkage Alarm State", + "gas": "Gas", + "gas_density": "Gas Density", + "gas_sensitivity": "Gas Sensitivity", + "tamper": "Tamper", "auto_off": "Auto Off", + "action_side": "Action Side", + "action_to_side": "Action To Side", + "water_leak": "Water Leak", + "presence": "Presence", + "presence_event": "Presence Event", + "monitoring_mode": "Monitoring Mode", + "approach_distance": "Approach Distance", "motion_sensitivity": "Motion Sensitivity", - "occupancy_timeout": "Occupancy Timeout", - "window_open": "Window Open", + "reset_nopresence_status": "Reset Nopresence Status", + "region_upsert": "Region Upsert", + "region_id": "Region Id", + "zones": "Zones", + "region_delete": "Region Delete", + "occupancy": "Occupancy", + "detection_interval": "Detection Interval", + "trigger_indicator": "Trigger Indicator", + "pressure": "Pressure", + "dimmer_mode": "Dimmer Mode", + "battery_cover": "Battery Cover", + "detection_distance": "Detection Distance", + "pm25": "Pm 25", + "co2": "Co 2", + "warning": "Warning", + "level": "Level", + "strobe_level": "Strobe Level", + "strobe": "Strobe", + "strobe_duty_cycle": "Strobe Duty Cycle", + "duration": "Duration", + "alarm": "Alarm", + "ac_connected": "Ac Connected", + "volume": "Volume", + "test_alarm": "Test Alarm", + "test_alarm_result": "Test Alarm Result", + "battery_level": "Battery Level", + "fault_alarm": "Fault Alarm", + "silence_siren": "Silence Siren", + "dayofweek": "Dayofweek", + "transitions": "Transitions", "window_open_force": "Window Open Force", "keypad_lockout": "Keypad Lockout", "action_code": "Action Code", "action_transaction": "Action Transaction", "action_zone": "Action Zone", + "running_mode": "Running Mode", + "pi_heating_demand": "Pi Heating Demand", + "vacation_mode": "Vacation Mode", "tilt": "Tilt", - "on_transition_time": "On Transition Time", - "off_transition_time": "Off Transition Time", - "ballast_physical_minimum_level": "Ballast Physical Minimum Level", - "ballast_physical_maximum_level": "Ballast Physical Maximum Level", + "level_config": "Level Config", + "on_off_transition_time": "On Off Transition Time", + "on_level": "On Level", + "execute_if_off": "Execute If Off", + "current_level_startup": "Current Level Startup", "ballast_minimum_level": "Ballast Minimum Level", "ballast_maximum_level": "Ballast Maximum Level", "minimum_on_level": "Minimum On Level", @@ -1222,22 +1453,194 @@ "status_capacitive_load": "Status Capacitive Load", "status_inductive_load": "Status Inductive Load", "mode_phase_control": "Mode Phase Control", - "meter_number": "Meter Number", - "trip": "Trip", - "countdown_timer": "Countdown Timer", - "voltage_rms": "Voltage Rms", + "tds": "Tds", + "ph": "Ph", + "ec": "Ec", + "orp": "Orp", + "free_chlorine": "Free Chlorine", + "ph_max": "Ph Max", + "ph_min": "Ph Min", + "ec_max": "Ec Max", + "ec_min": "Ec Min", + "orp_max": "Orp Max", + "orp_min": "Orp Min", + "free_chlorine_max": "Free Chlorine Max", + "free_chlorine_min": "Free Chlorine Min", + "salinity": "Salinity", + "detection_delay": "Detection Delay", + "keep_time": "Keep Time", + "minimum_range": "Minimum Range", + "maximum_range": "Maximum Range", + "current_heating_setpoint": "Current Heating Setpoint", + "min_temperature": "Min Temperature", + "max_temperature": "Max Temperature", + "eco_mode": "Eco Mode", + "max_temperature_limit": "Max Temperature Limit", + "min_temperature_limit": "Min Temperature Limit", + "deadzone_temperature": "Deadzone Temperature", + "valve": "Valve", + "manual_mode": "Manual Mode", + "schedule_monday": "Schedule Monday", + "schedule_tuesday": "Schedule Tuesday", + "schedule_wednesday": "Schedule Wednesday", + "schedule_thursday": "Schedule Thursday", + "schedule_friday": "Schedule Friday", + "schedule_saturday": "Schedule Saturday", + "schedule_sunday": "Schedule Sunday", + "ac_frequency": "Ac Frequency", + "power_a": "Power A", + "power_b": "Power B", + "power_ab": "Power Ab", + "current_a": "Current A", + "current_b": "Current B", + "power_factor_a": "Power Factor A", + "power_factor_b": "Power Factor B", + "energy_flow_a": "Energy Flow A", + "energy_flow_b": "Energy Flow B", + "energy_a": "Energy A", + "energy_b": "Energy B", + "energy_produced_a": "Energy Produced A", + "energy_produced_b": "Energy Produced B", + "update_frequency": "Update Frequency", + "target_distance": "Target Distance", + "radar_sensitivity": "Radar Sensitivity", + "entry_sensitivity": "Entry Sensitivity", + "illuminance_threshold": "Illuminance Threshold", + "detection_range": "Detection Range", + "shield_range": "Shield Range", + "entry_distance_indentation": "Entry Distance Indentation", + "entry_filter_time": "Entry Filter Time", + "departure_delay": "Departure Delay", + "block_time": "Block Time", + "breaker_status": "Breaker Status", + "breaker_mode": "Breaker Mode", + "status_indication": "Status Indication", + "presence_state": "Presence State", + "detection_distance_max": "Detection Distance Max", + "detection_distance_min": "Detection Distance Min", + "fading_time": "Fading Time", + "presence_sensitivity": "Presence Sensitivity", + "type": "Type", + "ringtone": "Ringtone", + "power_type": "Power Type", + "radar_scene": "Radar Scene", + "switch_mode": "Switch Mode", + "light_mode": "Light Mode", + "backlight_mode": "Backlight Mode", + "delay": "Delay", + "countdown": "Countdown", + "lower": "Lower", + "upper": "Upper", + "touch": "Touch", + "indicator_mode": "Indicator Mode", + "produced_energy": "Produced Energy", + "energy_flow": "Energy Flow", + "voltage_X": "Voltage X", + "voltage_Y": "Voltage Y", + "voltage_Z": "Voltage Z", + "power_X": "Power X", + "power_Y": "Power Y", + "power_Z": "Power Z", + "current_X": "Current X", + "current_Y": "Current Y", + "current_Z": "Current Z", + "calibration": "Calibration", + "motor_steering": "Motor Steering", + "child_lock": "Child Lock", + "calibration_time": "Calibration Time", + "motor_reversal": "Motor Reversal", + "temperature_threshold": "Temperature Threshold", + "temperature_breaker": "Temperature Breaker", + "power_threshold": "Power Threshold", + "power_breaker": "Power Breaker", + "over_current_threshold": "Over Current Threshold", + "over_current_breaker": "Over Current Breaker", + "over_voltage_threshold": "Over Voltage Threshold", + "over_voltage_breaker": "Over Voltage Breaker", + "under_voltage_threshold": "Under Voltage Threshold", + "under_voltage_breaker": "Under Voltage Breaker", + "light": "Light", + "fan_speed": "Fan Speed", + "error_status": "Error Status", + "battery_state": "Battery State", + "voltage_a": "Voltage A", + "voltage_b": "Voltage B", + "voltage_c": "Voltage C", + "power_c": "Power C", + "current_c": "Current C", + "energy_c": "Energy C", + "power_factor_c": "Power Factor C", + "min_brightness": "Min Brightness", + "max_brightness": "Max Brightness", + "light_type": "Light Type", + "large_motion_detection_sensitivity": "Large Motion Detection Sensitivity", + "large_motion_detection_distance": "Large Motion Detection Distance", + "motion_state": "Motion State", + "medium_motion_detection_distance": "Medium Motion Detection Distance", + "medium_motion_detection_sensitivity": "Medium Motion Detection Sensitivity", + "indicator": "Indicator", + "small_detection_distance": "Small Detection Distance", + "small_detection_sensitivity": "Small Detection Sensitivity", + "illuminance_interval": "Illuminance Interval", + "gas_value": "Gas Value", + "temperature_unit": "Temperature Unit", + "temperature_calibration": "Temperature Calibration", + "humidity_calibration": "Humidity Calibration", + "duration_of_attendance": "Duration Of Attendance", + "duration_of_absence": "Duration Of Absence", + "led_state": "Led State", + "learned_ir_code": "Learned Ir Code", + "ir_code_to_send": "Ir Code To Send", + "goto_positon": "Goto Positon", + "active_power": "Active Power", + "cycle_count": "Cycle Count", + "cycle_time": "Cycle Time", + "top_limit": "Top Limit", + "bottom_limit": "Bottom Limit", + "favorite_position": "Favorite Position", + "reverse_direction": "Reverse Direction", + "motor_type": "Motor Type", + "report": "Report", + "temperature_report_interval": "Temperature Report Interval", + "temperature_unit_convert": "Temperature Unit Convert", + "temperature_alarm": "Temperature Alarm", + "humidity_alarm": "Humidity Alarm", + "max_humidity": "Max Humidity", + "min_humidity": "Min Humidity", + "small_motion_detection_distance": "Small Motion Detection Distance", + "small_motion_detection_sensitivity": "Small Motion Detection Sensitivity", + "static_detection_distance": "Static Detection Distance", + "static_detection_sensitivity": "Static Detection Sensitivity", + "alarm_volume": "Alarm Volume", + "alarm_time": "Alarm Time", + "self_test": "Self Test", + "brightness_state": "Brightness State", + "action_step_size": "Action Step Size", + "action_transition_time": "Action Transition Time", + "action_rate": "Action Rate", + "meter_number": "Meter Number", + "trip": "Trip", + "countdown_timer": "Countdown Timer", + "voltage_rms": "Voltage Rms", "current_average": "Current Average", + "power_l1": "Power L 1", + "power_l2": "Power L 2", + "power_l3": "Power L 3", "energy_consumed": "Energy Consumed", "clear_device_data": "Clear Device Data", - "radar_sensitivity": "Radar Sensitivity", - "radar_scene": "Radar Scene", + "motion_speed": "Motion Speed", + "motion_direction": "Motion Direction", + "tumble_switch": "Tumble Switch", + "fall_sensitivity": "Fall Sensitivity", + "tumble_alarm_time": "Tumble Alarm Time", + "fall_down_status": "Fall Down Status", + "static_dwell_alarm": "Static Dwell Alarm", "o_sensitivity": "O Sensitivity", "v_sensitivity": "V Sensitivity", "led_status": "Led Status", "vacancy_delay": "Vacancy Delay", "light_on_luminance_prefer": "Light On Luminance Prefer", "light_off_luminance_prefer": "Light Off Luminance Prefer", - "mode": "Mode", "luminance_level": "Luminance Level", "reference_luminance": "Reference Luminance", "vacant_confirm_time": "Vacant Confirm Time", @@ -1247,104 +1650,384 @@ "alarm_humidity_min": "Alarm Humidity Min", "alarm_humidity": "Alarm Humidity", "alarm_temperature": "Alarm Temperature", - "volume": "Volume", - "power_on_behavior": "Power On Behavior", - "min_brightness": "Min Brightness", - "max_temperature": "Max Temperature", - "min_temperature": "Min Temperature", - "wednesday_schedule": "Wednesday Schedule", + "trigger": "Trigger", + "garage_door_contact": "Garage Door Contact", + "frost_protection": "Frost Protection", + "upper_temp": "Upper Temp", + "week": "Week", + "sound": "Sound", + "factory_reset": "Factory Reset", + "heating_temp_limit": "Heating Temp Limit", + "fault": "Fault", + "threshold_1": "Threshold 1", + "threshold_1_protection": "Threshold 1 Protection", + "threshold_1_value": "Threshold 1 Value", + "threshold_2": "Threshold 2", + "threshold_2_protection": "Threshold 2 Protection", + "threshold_2_value": "Threshold 2 Value", + "clear_fault": "Clear Fault", + "meter_id": "Meter Id", + "power_factor": "Power Factor", + "silence": "Silence", + "smoke_concentration": "Smoke Concentration", + "device_fault": "Device Fault", + "window": "Window", + "alarm_switch": "Alarm Switch", "boost_heating": "Boost Heating", - "boost_heating_countdown": "Boost Heating Countdown", + "boost_time": "Boost Time", + "scale_protection": "Scale Protection", "open_window": "Open Window", "open_window_temperature": "Open Window Temperature", - "holiday_temperature": "Holiday Temperature", "comfort_temperature": "Comfort Temperature", "eco_temperature": "Eco Temperature", - "boost_timeset_countdown": "Boost Timeset Countdown", - "frost_protection": "Frost Protection", "heating_stop": "Heating Stop", + "boost_timeset_countdown": "Boost Timeset Countdown", + "holiday_temperature": "Holiday Temperature", + "holiday_start_stop": "Holiday Start Stop", + "working_day": "Working Day", + "week_day": "Week Day", "online": "Online", - "schedule_monday": "Schedule Monday", - "schedule_tuesday": "Schedule Tuesday", - "schedule_wednesday": "Schedule Wednesday", - "schedule_thursday": "Schedule Thursday", - "schedule_friday": "Schedule Friday", - "schedule_saturday": "Schedule Saturday", - "schedule_sunday": "Schedule Sunday", - "error_status": "Error Status", + "opening_mode": "Opening Mode", + "set_upper_limit": "Set Upper Limit", + "set_bottom_limit": "Set Bottom Limit", + "click_control": "Click Control", + "motor_fault": "Motor Fault", "away_preset_days": "Away Preset Days", - "boost_time": "Boost Time", "force": "Force", - "away_preset_temperature": "Away Preset Temperature", - "calibration": "Calibration", - "motor_reversal": "Motor Reversal", - "backlight_mode": "Backlight Mode", + "programming_mode": "Programming Mode", + "workdays_schedule": "Workdays Schedule", + "holidays_schedule": "Holidays Schedule", + "work_state": "Work State", + "moving": "Moving", + "brightness_level": "Brightness Level", + "soil_moisture": "Soil Moisture", + "self_test_result": "Self Test Result", + "alarm_ringtone": "Alarm Ringtone", + "preheat": "Preheat", + "carbon_monoxide": "Carbon Monoxide", + "co": "Co", "formaldehyd": "Formaldehyd", - "direction": "Direction", - "warning": "Warning", - "level": "Level", - "strobe_level": "Strobe Level", - "strobe": "Strobe", - "strobe_duty_cycle": "Strobe Duty Cycle", - "duration": "Duration", + "action_group": "Action Group", "x_axis": "X Axis", "y_axis": "Y Axis", "z_axis": "Z Axis", + "on_transition_time": "On Transition Time", + "off_transition_time": "Off Transition Time", + "direction": "Direction", + "outdoor_temperature": "Outdoor Temperature", + "unoccupied_heating_setpoint": "Unoccupied Heating Setpoint", + "away_mode": "Away Mode", + "button_vibration_level": "Button Vibration Level", + "floor_sensor_type": "Floor Sensor Type", + "powerup_status": "Powerup Status", + "floor_sensor_calibration": "Floor Sensor Calibration", + "dry_time": "Dry Time", + "mode_after_dry": "Mode After Dry", + "temperature_display": "Temperature Display", + "window_open_check": "Window Open Check", + "hysterersis": "Hysterersis", + "display_auto_off_enabled": "Display Auto Off Enabled", + "alarm_airtemp_overvalue": "Alarm Airtemp Overvalue", + "occupancy_level": "Occupancy Level", + "noise": "Noise", + "noise_detected": "Noise Detected", + "noise_timeout": "Noise Timeout", + "occupancy_timeout": "Occupancy Timeout", + "temperature_offset": "Temperature Offset", + "occupancy_sensitivity": "Occupancy Sensitivity", + "noise_detect_level": "Noise Detect Level", + "co2_autocalibration": "Co 2 Autocalibration", + "co2_manual_calibration": "Co 2 Manual Calibration", + "th_heater": "Th Heater", + "light_indicator_level": "Light Indicator Level", "beep": "Beep", + "white_brightness": "White Brightness", + "tank_level": "Tank Level", + "low_water_temp_protection": "Low Water Temp Protection", + "timer_seconds": "Timer Seconds", "led_intensity_on": "Led Intensity On", "led_intensity_off": "Led Intensity Off", "minimum_brightness": "Minimum Brightness", + "led_color_on": "Led Color On", + "r": "R", + "g": "G", + "b": "B", + "led_color_off": "Led Color Off", + "connected_load": "Connected Load", + "thermostat_occupancy": "Thermostat Occupancy", + "second_display_mode": "Second Display Mode", + "thermostat_outdoor_temperature": "Thermostat Outdoor Temperature", + "outdoor_temperature_timeout": "Outdoor Temperature Timeout", + "enable_outdoor_temperature": "Enable Outdoor Temperature", + "temperature_display_mode": "Temperature Display Mode", + "time_format": "Time Format", "backlight_auto_dim": "Backlight Auto Dim", + "max_heat_setpoint_limit": "Max Heat Setpoint Limit", + "min_heat_setpoint_limit": "Min Heat Setpoint Limit", + "floor_control_mode": "Floor Control Mode", + "floor_max_heat_setpoint": "Floor Max Heat Setpoint", + "floor_min_heat_setpoint": "Floor Min Heat Setpoint", + "ambiant_max_heat_setpoint": "Ambiant Max Heat Setpoint", + "floor_temperature_sensor": "Floor Temperature Sensor", + "main_cycle_output": "Main Cycle Output", + "aux_cycle_output": "Aux Cycle Output", + "pump_protection": "Pump Protection", + "aux_connected_load": "Aux Connected Load", + "rf_pairing": "Rf Pairing", + "occupancy_in": "Occupancy In", + "occupancy_out": "Occupancy Out", + "occupancy_or": "Occupancy Or", + "occupancy_and": "Occupancy And", + "door_state": "Door State", + "status": "Status", "people": "People", + "rf_pairing_on": "Rf Pairing On", + "counting_freeze": "Counting Freeze", + "tof_init": "Tof Init", + "rf_state": "Rf State", + "transaction": "Transaction", + "fast_in": "Fast In", + "fast_out": "Fast Out", + "schneider_pilot_mode": "Schneider Pilot Mode", + "power_apparent": "Power Apparent", + "power_phase_a": "Power Phase A", + "power_phase_b": "Power Phase B", + "power_phase_c": "Power Phase C", + "energy_phase_a": "Energy Phase A", + "energy_phase_b": "Energy Phase B", + "energy_phase_c": "Energy Phase C", + "voltage_phase_a": "Voltage Phase A", + "voltage_phase_b": "Voltage Phase B", + "voltage_phase_c": "Voltage Phase C", + "voltage_phase_ab": "Voltage Phase Ab", + "voltage_phase_bc": "Voltage Phase Bc", + "voltage_phase_ca": "Voltage Phase Ca", + "current_phase_a": "Current Phase A", + "current_phase_b": "Current Phase B", + "current_phase_c": "Current Phase C", + "identify": "Identify", "zone_mode": "Zone Mode", + "hact_config": "Hact Config", + "fip_setting": "Fip Setting", "calibrate_valve": "Calibrate Valve", "valve_calibration_status": "Valve Calibration Status", - "schneider_pilot_mode": "Schneider Pilot Mode", - "dimmer_mode": "Dimmer Mode", + "lift_duration": "Lift Duration", + "heating": "Heating", + "weather_delay": "Weather Delay", "timer_state": "Timer State", "timer": "Timer", "timer_time_left": "Timer Time Left", "last_valve_open_duration": "Last Valve Open Duration", "water_consumed": "Water Consumed", - "mounted_mode_active": "Mounted Mode Active", - "mounted_mode_control": "Mounted Mode Control", - "thermostat_vertical_orientation": "Thermostat Vertical Orientation", - "viewing_direction": "Viewing Direction", - "heat_available": "Heat Available", - "heat_required": "Heat Required", - "setpoint_change_source": "Setpoint Change Source", - "external_measured_room_sensor": "External Measured Room Sensor", - "window_open_internal": "Window Open Internal", - "window_open_external": "Window Open External", - "day_of_week": "Day Of Week", - "trigger_time": "Trigger Time", - "algorithm_scale_factor": "Algorithm Scale Factor", - "load_balancing_enable": "Load Balancing Enable", - "load_room_mean": "Load Room Mean", - "load_estimate": "Load Estimate", + "cycle_timer_1": "Cycle Timer 1", + "cycle_timer_2": "Cycle Timer 2", + "cycle_timer_3": "Cycle Timer 3", + "cycle_timer_4": "Cycle Timer 4", + "normal_schedule_timer_1": "Normal Schedule Timer 1", + "normal_schedule_timer_2": "Normal Schedule Timer 2", + "normal_schedule_timer_3": "Normal Schedule Timer 3", + "normal_schedule_timer_4": "Normal Schedule Timer 4", + "water_flow": "Water Flow", + "last_watering_duration": "Last Watering Duration", + "remaining_watering_time": "Remaining Watering Time", + "valve_state": "Valve State", + "shutdown_timer": "Shutdown Timer", + "valve_state_auto_shutdown": "Valve State Auto Shutdown", + "valve_position": "Valve Position", + "radio_strength": "Radio Strength", + "gradient_scene": "Gradient Scene", + "gradient": "Gradient", "led_indication": "Led Indication", + "action_duration": "Action Duration", "device_mode": "Device Mode", - "occupied_cooling_setpoint": "Occupied Cooling Setpoint", + "default_on_off_state": "Default On Off State", + "rms_voltage": "Rms Voltage", + "consumed_energy": "Consumed Energy", + "alarm_voltage_min": "Alarm Voltage Min", + "alarm_voltage_max": "Alarm Voltage Max", + "alarm_power_max": "Alarm Power Max", + "alarm_consumed_energy": "Alarm Consumed Energy", + "voltage_min": "Voltage Min", + "voltage_max": "Voltage Max", + "power_max": "Power Max", + "consumed_energy_limit": "Consumed Energy Limit", + "rssi": "Rssi", + "last_message_lqi": "Last Message Lqi", + "last_message_rssi": "Last Message Rssi", + "unoccupied_cooling_setpoint": "Unoccupied Cooling Setpoint", + "programming_operation_mode": "Programming Operation Mode", + "max_cool_setpoint_limit": "Max Cool Setpoint Limit", + "min_cool_setpoint_limit": "Min Cool Setpoint Limit", + "voltage_l1": "Voltage L 1", + "voltage_l2": "Voltage L 2", + "voltage_l3": "Voltage L 3", + "current_l1": "Current L 1", + "current_l2": "Current L 2", + "current_l3": "Current L 3", + "energy_l1": "Energy L 1", + "energy_l2": "Energy L 2", + "energy_l3": "Energy L 3", + "reactive_energy_l1": "Reactive Energy L 1", + "reactive_energy_l2": "Reactive Energy L 2", + "reactive_energy_l3": "Reactive Energy L 3", + "reactive_power_l1": "Reactive Power L 1", + "reactive_power_l2": "Reactive Power L 2", + "reactive_power_l3": "Reactive Power L 3", "ac_louver_position": "Ac Louver Position", - "sound_volume": "Sound Volume", + "last_unlock_source": "Last Unlock Source", + "last_unlock_user": "Last Unlock User", + "last_lock_source": "Last Lock Source", + "last_lock_user": "Last Lock User", + "last_used_pin_code": "Last Used Pin Code", "auto_relock": "Auto Relock", - "power_type": "Power Type", - "humidity_alarm": "Humidity Alarm", - "temperature_alarm": "Temperature Alarm", - "melody": "Melody", + "temperature_sensitivity": "Temperature Sensitivity", + "humidity_report_interval": "Humidity Report Interval", + "humidity_sensitivity": "Humidity Sensitivity", + "led_enable": "Led Enable", + "alarm_state": "Alarm State", + "tamper_alarm_switch": "Tamper Alarm Switch", + "tamper_alarm": "Tamper Alarm", + "alarm_melody": "Alarm Melody", + "alarm_mode": "Alarm Mode", "temperature_min": "Temperature Min", "temperature_max": "Temperature Max", + "temperature_scale": "Temperature Scale", "humidity_min": "Humidity Min", "humidity_max": "Humidity Max", - "do_not_disturb": "Do Not Disturb", - "color_power_on_behavior": "Color Power On Behavior", - "eco_mode": "Eco Mode", + "melody": "Melody", + "battpercentage": "Battpercentage", + "display_brightnesss": "Display Brightnesss", + "display_auto_off": "Display Auto Off", + "power_up_status": "Power Up Status", + "backlight": "Backlight", + "boost_heating_countdown": "Boost Heating Countdown", "boost_heating_countdown_time_set": "Boost Heating Countdown Time Set", - "deadzone_temperature": "Deadzone Temperature", - "max_temperature_limit": "Max Temperature Limit", - "sensor": "Sensor", - "fan_mode": "Fan Mode", - "motor_direction": "Motor Direction", + "indicate_light": "Indicate Light", + "program": "Program", + "weekdays_p1_hour": "Weekdays P 1 Hour", + "weekdays_p1_minute": "Weekdays P 1 Minute", + "weekdays_p1_temperature": "Weekdays P 1 Temperature", + "weekdays_p2_hour": "Weekdays P 2 Hour", + "weekdays_p2_minute": "Weekdays P 2 Minute", + "weekdays_p2_temperature": "Weekdays P 2 Temperature", + "weekdays_p3_hour": "Weekdays P 3 Hour", + "weekdays_p3_minute": "Weekdays P 3 Minute", + "weekdays_p3_temperature": "Weekdays P 3 Temperature", + "weekdays_p4_hour": "Weekdays P 4 Hour", + "weekdays_p4_minute": "Weekdays P 4 Minute", + "weekdays_p4_temperature": "Weekdays P 4 Temperature", + "saturday_p1_hour": "Saturday P 1 Hour", + "saturday_p1_minute": "Saturday P 1 Minute", + "saturday_p1_temperature": "Saturday P 1 Temperature", + "saturday_p2_hour": "Saturday P 2 Hour", + "saturday_p2_minute": "Saturday P 2 Minute", + "saturday_p2_temperature": "Saturday P 2 Temperature", + "saturday_p3_hour": "Saturday P 3 Hour", + "saturday_p3_minute": "Saturday P 3 Minute", + "saturday_p3_temperature": "Saturday P 3 Temperature", + "saturday_p4_hour": "Saturday P 4 Hour", + "saturday_p4_minute": "Saturday P 4 Minute", + "saturday_p4_temperature": "Saturday P 4 Temperature", + "sunday_p1_hour": "Sunday P 1 Hour", + "sunday_p1_minute": "Sunday P 1 Minute", + "sunday_p1_temperature": "Sunday P 1 Temperature", + "sunday_p2_hour": "Sunday P 2 Hour", + "sunday_p2_minute": "Sunday P 2 Minute", + "sunday_p2_temperature": "Sunday P 2 Temperature", + "sunday_p3_hour": "Sunday P 3 Hour", + "sunday_p3_minute": "Sunday P 3 Minute", + "sunday_p3_temperature": "Sunday P 3 Temperature", + "sunday_p4_hour": "Sunday P 4 Hour", + "sunday_p4_minute": "Sunday P 4 Minute", + "sunday_p4_temperature": "Sunday P 4 Temperature", + "min_setpoint_deadband": "Min Setpoint Deadband", + "sensor_type": "Sensor Type", + "target_temp_first": "Target Temp First", + "brightness_standby": "Brightness Standby", + "multiplier": "Multiplier", + "divisor": "Divisor", + "unitOfMeasure": "Unit Of Measure", + "EAST": "East", + "EAIT": "Eait", + "EASF01": "Easf 01", + "EASF02": "Easf 02", + "EASF03": "Easf 03", + "EASF04": "Easf 04", + "EASF05": "Easf 05", + "EASF06": "Easf 06", + "EASF07": "Easf 07", + "EASF08": "Easf 08", + "EASF09": "Easf 09", + "EASF10": "Easf 10", + "ADSC": "Adsc", + "PRM": "Prm", + "PREF": "Pref", + "PCOUP": "Pcoup", + "VTIC": "Vtic", + "CCASN": "Ccasn", + "CCASN-1": "Ccasn 1", + "UMOY1": "Umoy 1", + "ERQ1": "Erq 1", + "ERQ2": "Erq 2", + "ERQ3": "Erq 3", + "ERQ4": "Erq 4", + "IRMS1": "Irms 1", + "URMS1": "Urms 1", + "EASD01": "Easd 01", + "EASD02": "Easd 02", + "EASD03": "Easd 03", + "EASD04": "Easd 04", + "DATE": "Date", + "NTARF": "Ntarf", + "LTARF": "Ltarf", + "NGTF": "Ngtf", + "NJOURF": "Njourf", + "NJOURF+1": "Njourf 1", + "PJOURF+1": "Pjourf 1", + "PPOINTE1": "Ppointe 1", + "CCAIN": "Ccain", + "CCAIN-1": "Ccain 1", + "SINSTI": "Sinsti", + "SMAXIN": "Smaxin", + "SMAXIN-1": "Smaxin 1", + "MSG1": "Msg 1", + "MSG2": "Msg 2", + "RELAIS": "Relais", + "DPM1": "Dpm 1", + "DPM2": "Dpm 2", + "DPM3": "Dpm 3", + "STGE": "Stge", + "FPM1": "Fpm 1", + "FPM2": "Fpm 2", + "FPM3": "Fpm 3", + "SMAXN": "Smaxn", + "SINSTS": "Sinsts", + "SMAXN-1": "Smaxn 1", + "SMAXN2": "Smaxn 2", + "SMAXN3": "Smaxn 3", + "SINSTS2": "Sinsts 2", + "SINSTS3": "Sinsts 3", + "UMOY3": "Umoy 3", + "UMOY2": "Umoy 2", + "IRMS2": "Irms 2", + "IRMS3": "Irms 3", + "URMS2": "Urms 2", + "URMS3": "Urms 3", + "SMAXN2-1": "Smaxn 21", + "SMAXN3-1": "Smaxn 31", + "PTEC": "Ptec", + "MOTDETAT": "Motdetat", + "HHPHC": "Hhphc", + "PEJP": "Pejp", + "DEMAIN": "Demain", + "IMAX": "Imax", + "ADPS": "Adps", + "IMAX2": "Imax 2", + "IMAX3": "Imax 3", + "PPOT": "Ppot", + "ADIR1": "Adir 1", + "ADIR2": "Adir 2", + "ADIR3": "Adir 3", "alert_behaviour": "Alert Behaviour", "eco2": "Eco 2", "current_heating_setpoint_auto": "Current Heating Setpoint Auto", @@ -1504,349 +2187,84 @@ "saturday_minute_1": "Saturday Minute 1", "saturday_temp_2": "Saturday Temp 2", "saturday_hour_2": "Saturday Hour 2", - "saturday_minute_2": "Saturday Minute 2", - "saturday_temp_3": "Saturday Temp 3", - "saturday_hour_3": "Saturday Hour 3", - "saturday_minute_3": "Saturday Minute 3", - "saturday_temp_4": "Saturday Temp 4", - "saturday_hour_4": "Saturday Hour 4", - "saturday_minute_4": "Saturday Minute 4", - "saturday_temp_5": "Saturday Temp 5", - "saturday_hour_5": "Saturday Hour 5", - "saturday_minute_5": "Saturday Minute 5", - "saturday_temp_6": "Saturday Temp 6", - "saturday_hour_6": "Saturday Hour 6", - "saturday_minute_6": "Saturday Minute 6", - "saturday_temp_7": "Saturday Temp 7", - "saturday_hour_7": "Saturday Hour 7", - "saturday_minute_7": "Saturday Minute 7", - "saturday_temp_8": "Saturday Temp 8", - "saturday_hour_8": "Saturday Hour 8", - "saturday_minute_8": "Saturday Minute 8", - "saturday_temp_9": "Saturday Temp 9", - "saturday_hour_9": "Saturday Hour 9", - "saturday_minute_9": "Saturday Minute 9", - "sunday": "Sunday", - "sunday_temp_1": "Sunday Temp 1", - "sunday_hour_1": "Sunday Hour 1", - "sunday_minute_1": "Sunday Minute 1", - "sunday_temp_2": "Sunday Temp 2", - "sunday_hour_2": "Sunday Hour 2", - "sunday_minute_2": "Sunday Minute 2", - "sunday_temp_3": "Sunday Temp 3", - "sunday_hour_3": "Sunday Hour 3", - "sunday_minute_3": "Sunday Minute 3", - "sunday_temp_4": "Sunday Temp 4", - "sunday_hour_4": "Sunday Hour 4", - "sunday_minute_4": "Sunday Minute 4", - "sunday_temp_5": "Sunday Temp 5", - "sunday_hour_5": "Sunday Hour 5", - "sunday_minute_5": "Sunday Minute 5", - "sunday_temp_6": "Sunday Temp 6", - "sunday_hour_6": "Sunday Hour 6", - "sunday_minute_6": "Sunday Minute 6", - "sunday_temp_7": "Sunday Temp 7", - "sunday_hour_7": "Sunday Hour 7", - "sunday_minute_7": "Sunday Minute 7", - "sunday_temp_8": "Sunday Temp 8", - "sunday_hour_8": "Sunday Hour 8", - "sunday_minute_8": "Sunday Minute 8", - "sunday_temp_9": "Sunday Temp 9", - "sunday_hour_9": "Sunday Hour 9", - "sunday_minute_9": "Sunday Minute 9", - "power_alarm_active": "Power Alarm Active", - "power_alarm": "Power Alarm", - "led_enable": "Led Enable", - "keep_time": "Keep Time", - "illuminance_calibration": "Illuminance Calibration", - "reporting_time": "Reporting Time", - "temperature_calibration": "Temperature Calibration", - "humidity_calibration": "Humidity Calibration", - "pir_enable": "Pir Enable", - "reporting_enable": "Reporting Enable", - "fan_speed": "Fan Speed", - "pm25": "Pm 25", - "air_quality": "Air Quality", - "replace_filter": "Replace Filter", - "requested_brightness_level": "Requested Brightness Level", - "requested_brightness_percent": "Requested Brightness Percent", - "illuminance_above_threshold": "Illuminance Above Threshold", - "temperature_setpoint_hold": "Temperature Setpoint Hold", - "temperature_setpoint_hold_duration": "Temperature Setpoint Hold Duration", - "hcho": "Hcho", - "aqi": "Aqi", - "pm10": "Pm 10", - "battery_state": "Battery State", - "threshold": "Threshold", - "sos": "Sos", - "trv_mode": "Trv Mode", - "valve_position": "Valve Position", - "display_text": "Display Text", - "load": "Load", - "regulator_mode": "Regulator Mode", - "regulator_time": "Regulator Time", - "floor_temp": "Floor Temp", - "max_floor_temp": "Max Floor Temp", - "mean_power": "Mean Power", - "frost_guard": "Frost Guard", - "night_switching": "Night Switching", - "sound": "Sound", - "time_ring": "Time Ring", - "time_talk": "Time Talk", - "time_open": "Time Open", - "time_bell": "Time Bell", - "time_report": "Time Report", - "led_feedback": "Led Feedback", - "enable_abc": "Enable Abc", - "threshold1": "Threshold 1", - "threshold2": "Threshold 2", - "temperature_offset": "Temperature Offset", - "humidity_offset": "Humidity Offset", - "pressure_offset": "Pressure Offset", - "radioactive_events_per_minute": "Radioactive Events Per Minute", - "radiation_dose_per_hour": "Radiation Dose Per Hour", - "buzzer_feedback": "Buzzer Feedback", - "alert_threshold": "Alert Threshold", - "sensors_type": "Sensors Type", - "sensors_count": "Sensors Count", - "switch_actions": "Switch Actions", - "cpu_temperature": "Cpu Temperature", - "squawk": "Squawk", - "max_duration": "Max Duration", - "pulse_configuration": "Pulse Configuration", - "interface_mode": "Interface Mode", - "current_summation": "Current Summation", - "check_meter": "Check Meter", - "reliability": "Reliability", - "fault": "Fault", - "current_phase_b": "Current Phase B", - "voltage_phase_b": "Voltage Phase B", - "current_phase_c": "Current Phase C", - "voltage_phase_c": "Voltage Phase C", - "master_pin_mode": "Master Pin Mode", - "rfid_enable": "Rfid Enable", - "relock_enabled": "Relock Enabled", - "lock_mode": "Lock Mode", - "service_mode": "Service Mode", - "led_state": "Led State", - "key_state": "Key State", - "abs_min_heat_setpoint_limit": "Abs Min Heat Setpoint Limit", - "abs_max_heat_setpoint_limit": "Abs Max Heat Setpoint Limit", - "min_heat_setpoint_limit": "Min Heat Setpoint Limit", - "max_heat_setpoint_limit": "Max Heat Setpoint Limit", - "output_status": "Output Status", - "room_status_code": "Room Status Code", - "system_status_code": "System Status Code", - "system_status_water": "System Status Water", - "multimaster_role": "Multimaster Role", - "l1": "L 1", - "l2": "L 2", - "l3": "L 3", - "l4": "L 4", - "l5": "L 5", - "l6": "L 6", - "l7": "L 7", - "l8": "L 8", - "l9": "L 9", - "l10": "L 10", - "l11": "L 11", - "l12": "L 12", - "l13": "L 13", - "l14": "L 14", - "l15": "L 15", - "l16": "L 16", - "led": "Led", - "motor_working_mode": "Motor Working Mode", - "percent_state": "Percent State", - "border": "Border", - "flip_indicator_light": "Flip Indicator Light", - "motor_state": "Motor State", - "running": "Running", - "gas_sensitivity": "Gas Sensitivity", - "linkage_alarm": "Linkage Alarm", - "power_outage_count": "Power Outage Count", - "presence_event": "Presence Event", - "monitoring_mode": "Monitoring Mode", - "approach_distance": "Approach Distance", - "detection_interval": "Detection Interval", - "brightness_state": "Brightness State", - "action_step_size": "Action Step Size", - "action_transition_time": "Action Transition Time", - "action_rate": "Action Rate", - "tumble_switch": "Tumble Switch", - "fall_sensitivity": "Fall Sensitivity", - "tumble_alarm_time": "Tumble Alarm Time", - "fall_down_status": "Fall Down Status", - "static_dwell_alarm": "Static Dwell Alarm", - "trigger": "Trigger", - "garage_door_contact": "Garage Door Contact", - "indicator_mode": "Indicator Mode", - "holiday_start_stop": "Holiday Start Stop", - "schedule": "Schedule", - "co": "Co", - "occupancy_level": "Occupancy Level", - "noise": "Noise", - "noise_detected": "Noise Detected", - "noise_timeout": "Noise Timeout", - "white_brightness": "White Brightness", - "door_state": "Door State", - "power_factor": "Power Factor", - "ac_frequency": "Ac Frequency", - "status": "Status", - "lift_duration": "Lift Duration", - "programming_operation_mode": "Programming Operation Mode", - "radiator_covered": "Radiator Covered", - "window_open_feature": "Window Open Feature", - "action_duration": "Action Duration", - "temperature_unit_convert": "Temperature Unit Convert", - "temperature_sensitivity": "Temperature Sensitivity", - "battpercentage": "Battpercentage", - "valve_state": "Valve State", - "indicate_light": "Indicate Light", - "ADCO": "Adco", - "BASE": "Base", - "OPTARIF": "Optarif", - "ISOUSC": "Isousc", - "HCHC": "Hchc", - "HCHP": "Hchp", - "BBRHCJW": "Bbrhcjw", - "BBRHPJW": "Bbrhpjw", - "BBRHCJR": "Bbrhcjr", - "BBRHPJR": "Bbrhpjr", - "IINST": "Iinst", - "IINST2": "Iinst 2", - "IINST3": "Iinst 3", - "IMAX": "Imax", - "IMAX2": "Imax 2", - "IMAX3": "Imax 3", - "PMAX": "Pmax", - "PAPP": "Papp", - "PTEC": "Ptec", - "DEMAIN": "Demain", - "HHPHC": "Hhphc", - "PPOT": "Ppot", - "PEJP": "Pejp", - "ADPS": "Adps", - "ADIR1": "Adir 1", - "ADIR2": "Adir 2", - "ADIR3": "Adir 3", - "LTARF": "Ltarf", - "NTARF": "Ntarf", - "VTIC": "Vtic", - "DATE": "Date", - "EASF07": "Easf 07", - "EASF08": "Easf 08", - "EASF09": "Easf 09", - "EASF10": "Easf 10", - "EASD01": "Easd 01", - "EASD02": "Easd 02", - "EASD03": "Easd 03", - "EASD04": "Easd 04", - "EAIT": "Eait", - "ERQ1": "Erq 1", - "ERQ2": "Erq 2", - "ERQ3": "Erq 3", - "ERQ4": "Erq 4", - "URMS1": "Urms 1", - "URMS2": "Urms 2", - "URMS3": "Urms 3", - "STGE": "Stge", - "PCOUP": "Pcoup", - "SINSTI": "Sinsti", - "SMAXIN": "Smaxin", - "SMAXIN-1": "Smaxin 1", - "CCASN": "Ccasn", - "CCASN-1": "Ccasn 1", - "CCAIN": "Ccain", - "CCAIN-1": "Ccain 1", - "UMOY1": "Umoy 1", - "UMOY2": "Umoy 2", - "UMOY3": "Umoy 3", - "SINSTS2": "Sinsts 2", - "SINSTS3": "Sinsts 3", - "SMAXN2": "Smaxn 2", - "SMAXN3": "Smaxn 3", - "SMAXN-1": "Smaxn 1", - "SMAXN2-1": "Smaxn 21", - "SMAXN3-1": "Smaxn 31", - "MSG1": "Msg 1", - "MSG2": "Msg 2", - "PRM": "Prm", - "DPM1": "Dpm 1", - "FPM1": "Fpm 1", - "DPM2": "Dpm 2", - "FPM2": "Fpm 2", - "DPM3": "Dpm 3", - "FPM3": "Fpm 3", - "RELAIS": "Relais", - "NJOURF": "Njourf", - "NJOURF+1": "Njourf 1", - "PJOURF+1": "Pjourf 1", - "PPOINTE1": "Ppointe 1", - "cable_outlet_mode": "Cable Outlet Mode", - "card": "Card", - "backlight_led": "Backlight Led", - "action_source_name": "Action Source Name", - "charging_status": "Charging Status", - "smoke_density_dbm": "Smoke Density Dbm", - "heartbeat_indicator": "Heartbeat Indicator", - "reset_nopresence_status": "Reset Nopresence Status", - "ac_connected": "Ac Connected", - "test_alarm": "Test Alarm", - "test_alarm_result": "Test Alarm Result", - "battery_level": "Battery Level", - "fault_alarm": "Fault Alarm", - "silence_siren": "Silence Siren", - "report_interval": "Report Interval", - "max_humidity": "Max Humidity", - "min_humidity": "Min Humidity", - "target_distance": "Target Distance", - "minimum_range": "Minimum Range", - "maximum_range": "Maximum Range", - "detection_delay": "Detection Delay", - "fading_time": "Fading Time", - "self_test": "Self Test", - "max_brightness": "Max Brightness", - "action_group": "Action Group", - "occupancy_sensitivity": "Occupancy Sensitivity", - "noise_detect_level": "Noise Detect Level", - "co2_autocalibration": "Co 2 Autocalibration", - "co2_manual_calibration": "Co 2 Manual Calibration", - "th_heater": "Th Heater", - "power_apparent": "Power Apparent", - "power_phase_a": "Power Phase A", - "power_phase_b": "Power Phase B", - "power_phase_c": "Power Phase C", - "energy_phase_a": "Energy Phase A", - "energy_phase_b": "Energy Phase B", - "energy_phase_c": "Energy Phase C", - "voltage_phase_a": "Voltage Phase A", - "voltage_phase_ab": "Voltage Phase Ab", - "voltage_phase_bc": "Voltage Phase Bc", - "voltage_phase_ca": "Voltage Phase Ca", - "current_phase_a": "Current Phase A", - "preheat_status": "Preheat Status", - "adaptation_run_status": "Adaptation Run Status", - "adaptation_run_settings": "Adaptation Run Settings", - "adaptation_run_control": "Adaptation Run Control", - "regulation_setpoint_offset": "Regulation Setpoint Offset", - "temperature_scale": "Temperature Scale", - "outdoor_temperature": "Outdoor Temperature", - "button_vibration_level": "Button Vibration Level", - "floor_sensor_type": "Floor Sensor Type", - "powerup_status": "Powerup Status", - "floor_sensor_calibration": "Floor Sensor Calibration", - "dry_time": "Dry Time", - "mode_after_dry": "Mode After Dry", - "temperature_display": "Temperature Display", - "window_open_check": "Window Open Check", - "hysterersis": "Hysterersis", - "display_auto_off_enabled": "Display Auto Off Enabled", - "alarm_airtemp_overvalue": "Alarm Airtemp Overvalue", - "backlight": "Backlight", + "saturday_minute_2": "Saturday Minute 2", + "saturday_temp_3": "Saturday Temp 3", + "saturday_hour_3": "Saturday Hour 3", + "saturday_minute_3": "Saturday Minute 3", + "saturday_temp_4": "Saturday Temp 4", + "saturday_hour_4": "Saturday Hour 4", + "saturday_minute_4": "Saturday Minute 4", + "saturday_temp_5": "Saturday Temp 5", + "saturday_hour_5": "Saturday Hour 5", + "saturday_minute_5": "Saturday Minute 5", + "saturday_temp_6": "Saturday Temp 6", + "saturday_hour_6": "Saturday Hour 6", + "saturday_minute_6": "Saturday Minute 6", + "saturday_temp_7": "Saturday Temp 7", + "saturday_hour_7": "Saturday Hour 7", + "saturday_minute_7": "Saturday Minute 7", + "saturday_temp_8": "Saturday Temp 8", + "saturday_hour_8": "Saturday Hour 8", + "saturday_minute_8": "Saturday Minute 8", + "saturday_temp_9": "Saturday Temp 9", + "saturday_hour_9": "Saturday Hour 9", + "saturday_minute_9": "Saturday Minute 9", + "sunday": "Sunday", + "sunday_temp_1": "Sunday Temp 1", + "sunday_hour_1": "Sunday Hour 1", + "sunday_minute_1": "Sunday Minute 1", + "sunday_temp_2": "Sunday Temp 2", + "sunday_hour_2": "Sunday Hour 2", + "sunday_minute_2": "Sunday Minute 2", + "sunday_temp_3": "Sunday Temp 3", + "sunday_hour_3": "Sunday Hour 3", + "sunday_minute_3": "Sunday Minute 3", + "sunday_temp_4": "Sunday Temp 4", + "sunday_hour_4": "Sunday Hour 4", + "sunday_minute_4": "Sunday Minute 4", + "sunday_temp_5": "Sunday Temp 5", + "sunday_hour_5": "Sunday Hour 5", + "sunday_minute_5": "Sunday Minute 5", + "sunday_temp_6": "Sunday Temp 6", + "sunday_hour_6": "Sunday Hour 6", + "sunday_minute_6": "Sunday Minute 6", + "sunday_temp_7": "Sunday Temp 7", + "sunday_hour_7": "Sunday Hour 7", + "sunday_minute_7": "Sunday Minute 7", + "sunday_temp_8": "Sunday Temp 8", + "sunday_hour_8": "Sunday Hour 8", + "sunday_minute_8": "Sunday Minute 8", + "sunday_temp_9": "Sunday Temp 9", + "sunday_hour_9": "Sunday Hour 9", + "sunday_minute_9": "Sunday Minute 9", + "time_left": "Time Left", + "frost_lock": "Frost Lock", + "reset_frost_lock": "Reset Frost Lock", + "schedule_mode": "Schedule Mode", + "schedule_periodic": "Schedule Periodic", + "schedule_weekday": "Schedule Weekday", + "schedule_slot_1": "Schedule Slot 1", + "start_hour": "Start Hour", + "start_minute": "Start Minute", + "pause": "Pause", + "iterations": "Iterations", + "schedule_slot_2": "Schedule Slot 2", + "schedule_slot_3": "Schedule Slot 3", + "schedule_slot_4": "Schedule Slot 4", + "schedule_slot_5": "Schedule Slot 5", + "schedule_slot_6": "Schedule Slot 6", + "led_in_dark": "Led In Dark", + "led_if_on": "Led If On", + "cable_outlet_mode": "Cable Outlet Mode", + "power_alarm_active": "Power Alarm Active", + "power_alarm": "Power Alarm", + "auto_mode": "Auto Mode", + "power_state": "Power State", + "illuminance_calibration": "Illuminance Calibration", "led_effect": "Led Effect", "color": "Color", "individual_led_effect": "Individual Led Effect", + "led": "Led", "dimmingSpeedUpRemote": "Dimming Speed Up Remote", "dimmingSpeedUpLocal": "Dimming Speed Up Local", "rampRateOffToOnRemote": "Ramp Rate Off To On Remote", @@ -1868,12 +2286,20 @@ "activeEnergyReports": "Active Energy Reports", "powerType": "Power Type", "switchType": "Switch Type", - "physicalOnOffDelay": "Physical On Off Delay", + "higherOutputInNonNeutral": "Higher Output In Non Neutral", + "buttonDelay": "Button Delay", "smartBulbMode": "Smart Bulb Mode", + "doubleTapUpToParam55": "Double Tap Up To Param 55", + "doubleTapDownToParam56": "Double Tap Down To Param 56", + "brightnessLevelForDoubleTapUp": "Brightness Level For Double Tap Up", + "brightnessLevelForDoubleTapDown": "Brightness Level For Double Tap Down", "ledColorWhenOn": "Led Color When On", "ledColorWhenOff": "Led Color When Off", "ledIntensityWhenOn": "Led Intensity When On", "ledIntensityWhenOff": "Led Intensity When Off", + "ledBarScaling": "Led Bar Scaling", + "auxSwitchUniqueScenes": "Aux Switch Unique Scenes", + "bindingOffToOnSyncLevel": "Binding Off To On Sync Level", "localProtection": "Local Protection", "remoteProtection": "Remote Protection", "outputMode": "Output Mode", @@ -1907,7 +2333,34 @@ "defaultLed7ColorWhenOff": "Default Led 7 Color When Off", "defaultLed7IntensityWhenOn": "Default Led 7 Intensity When On", "defaultLed7IntensityWhenOff": "Default Led 7 Intensity When Off", - "doubleTapUpEvent": "Double Tap Up Event", + "relayClick": "Relay Click", + "doubleTapClearNotifications": "Double Tap Clear Notifications", + "reporting_time": "Reporting Time", + "pir_enable": "Pir Enable", + "reporting_enable": "Reporting Enable", + "action_color": "Action Color", + "action_color_temperature": "Action Color Temperature", + "voc_index": "Voc Index", + "color_options": "Color Options", + "air_quality": "Air Quality", + "replace_filter": "Replace Filter", + "filter_age": "Filter Age", + "requested_brightness_level": "Requested Brightness Level", + "requested_brightness_percent": "Requested Brightness Percent", + "illuminance_above_threshold": "Illuminance Above Threshold", + "temperature_setpoint_hold": "Temperature Setpoint Hold", + "temperature_setpoint_hold_duration": "Temperature Setpoint Hold Duration", + "hcho": "Hcho", + "aqi": "Aqi", + "pm10": "Pm 10", + "cycle_irrigation_num_times": "Cycle Irrigation Num Times", + "irrigation_start_time": "Irrigation Start Time", + "irrigation_end_time": "Irrigation End Time", + "last_irrigation_duration": "Last Irrigation Duration", + "irrigation_target": "Irrigation Target", + "cycle_irrigation_interval": "Cycle Irrigation Interval", + "threshold": "Threshold", + "sos": "Sos", "battery2": "Battery 2", "control_mode": "Control Mode", "switch_status": "Switch Status", @@ -1915,124 +2368,92 @@ "load_type": "Load Type", "load_dimmable": "Load Dimmable", "power_supply_mode": "Power Supply Mode", - "external_temperature": "External Temperature", - "hysteresis": "Hysteresis", - "max_temperature_protection": "Max Temperature Protection", - "action_user": "Action User", - "display_unit": "Display Unit", - "hooks_state": "Hooks State", - "target_position": "Target Position", - "power_source": "Power Source", - "charging": "Charging", - "buzzer": "Buzzer", - "buzzer_manual_alarm": "Buzzer Manual Alarm", - "buzzer_manual_mute": "Buzzer Manual Mute", - "linkage_alarm_state": "Linkage Alarm State", - "side": "Side", - "trigger_indicator": "Trigger Indicator", - "running_mode": "Running Mode", - "vacation_mode": "Vacation Mode", - "duration_of_attendance": "Duration Of Attendance", - "duration_of_absence": "Duration Of Absence", - "temperature_unit": "Temperature Unit", - "learned_ir_code": "Learned Ir Code", - "ir_code_to_send": "Ir Code To Send", - "goto_positon": "Goto Positon", - "active_power": "Active Power", - "cycle_count": "Cycle Count", - "cycle_time": "Cycle Time", - "top_limit": "Top Limit", - "bottom_limit": "Bottom Limit", - "favorite_position": "Favorite Position", - "reverse_direction": "Reverse Direction", - "motor_type": "Motor Type", - "report": "Report", - "factory_reset": "Factory Reset", - "heating_temp_limit": "Heating Temp Limit", - "upper_temp": "Upper Temp", - "brightness_level": "Brightness Level", - "unoccupied_heating_setpoint": "Unoccupied Heating Setpoint", - "light_indicator_level": "Light Indicator Level", - "rf_pairing": "Rf Pairing", - "occupancy_in": "Occupancy In", - "occupancy_out": "Occupancy Out", - "occupancy_or": "Occupancy Or", - "occupancy_and": "Occupancy And", - "rf_pairing_on": "Rf Pairing On", - "counting_freeze": "Counting Freeze", - "tof_init": "Tof Init", - "rf_state": "Rf State", - "transation": "Transation", - "fast_in": "Fast In", - "fast_out": "Fast Out", - "weather_delay": "Weather Delay", - "cycle_timer_1": "Cycle Timer 1", - "cycle_timer_2": "Cycle Timer 2", - "cycle_timer_3": "Cycle Timer 3", - "cycle_timer_4": "Cycle Timer 4", - "normal_schedule_timer_1": "Normal Schedule Timer 1", - "normal_schedule_timer_2": "Normal Schedule Timer 2", - "normal_schedule_timer_3": "Normal Schedule Timer 3", - "normal_schedule_timer_4": "Normal Schedule Timer 4", - "water_flow": "Water Flow", - "last_watering_duration": "Last Watering Duration", - "remaining_watering_time": "Remaining Watering Time", - "shutdown_timer": "Shutdown Timer", - "valve_state_auto_shutdown": "Valve State Auto Shutdown", - "radio_strength": "Radio Strength", - "gradient_scene": "Gradient Scene", - "default_on_off_state": "Default On Off State", - "rms_voltage": "Rms Voltage", - "consumed_energy": "Consumed Energy", - "alarm_voltage_min": "Alarm Voltage Min", - "alarm_voltage_max": "Alarm Voltage Max", - "alarm_power_max": "Alarm Power Max", - "alarm_consumed_energy": "Alarm Consumed Energy", - "voltage_min": "Voltage Min", - "voltage_max": "Voltage Max", - "power_max": "Power Max", - "consumed_energy_limit": "Consumed Energy Limit", - "rssi": "Rssi", - "last_message_lqi": "Last Message Lqi", - "last_message_rssi": "Last Message Rssi", - "unoccupied_cooling_setpoint": "Unoccupied Cooling Setpoint", - "max_cool_setpoint_limit": "Max Cool Setpoint Limit", - "min_cool_setpoint_limit": "Min Cool Setpoint Limit", - "voltage_l1": "Voltage L 1", - "voltage_l2": "Voltage L 2", - "voltage_l3": "Voltage L 3", - "current_l1": "Current L 1", - "current_l2": "Current L 2", - "current_l3": "Current L 3", - "energy_l1": "Energy L 1", - "energy_l2": "Energy L 2", - "energy_l3": "Energy L 3", - "reactive_energy_l1": "Reactive Energy L 1", - "reactive_energy_l2": "Reactive Energy L 2", - "reactive_energy_l3": "Reactive Energy L 3", - "power_l1": "Power L 1", - "power_l2": "Power L 2", - "power_l3": "Power L 3", - "reactive_power_l1": "Reactive Power L 1", - "reactive_power_l2": "Reactive Power L 2", - "reactive_power_l3": "Reactive Power L 3", - "ballast_power_on_level": "Ballast Power On Level", - "led_in_dark": "Led In Dark", - "led_if_on": "Led If On", - "power_state": "Power State", - "action_color": "Action Color", - "action_color_temperature": "Action Color Temperature", - "auto_relock_time": "Auto Relock Time", - "irrigation_target": "Irrigation Target", - "cycle_irrigation_num_times": "Cycle Irrigation Num Times", - "cycle_irrigation_interval": "Cycle Irrigation Interval", - "irrigation_start_time": "Irrigation Start Time", - "irrigation_end_time": "Irrigation End Time", - "last_irrigation_duration": "Last Irrigation Duration", + "rain": "Rain", + "trv_mode": "Trv Mode", + "display_text": "Display Text", + "load": "Load", + "regulator_mode": "Regulator Mode", + "regulator_time": "Regulator Time", + "floor_temp": "Floor Temp", + "max_floor_temp": "Max Floor Temp", + "mean_power": "Mean Power", + "frost_guard": "Frost Guard", + "night_switching": "Night Switching", + "time_ring": "Time Ring", + "time_talk": "Time Talk", + "time_open": "Time Open", + "time_bell": "Time Bell", + "time_report": "Time Report", + "led_feedback": "Led Feedback", + "enable_abc": "Enable Abc", + "threshold1": "Threshold 1", + "threshold2": "Threshold 2", + "humidity_offset": "Humidity Offset", + "pressure_offset": "Pressure Offset", + "radioactive_events_per_minute": "Radioactive Events Per Minute", + "radiation_dose_per_hour": "Radiation Dose Per Hour", + "buzzer_feedback": "Buzzer Feedback", + "alert_threshold": "Alert Threshold", + "sensors_type": "Sensors Type", + "sensors_count": "Sensors Count", + "switch_actions": "Switch Actions", + "cpu_temperature": "Cpu Temperature", + "input": "Input", + "squawk": "Squawk", + "max_duration": "Max Duration", + "pulse_configuration": "Pulse Configuration", + "interface_mode": "Interface Mode", + "current_summation": "Current Summation", + "check_meter": "Check Meter", + "reliability": "Reliability", + "power_reactive": "Power Reactive", + "card": "Card", + "master_pin_mode": "Master Pin Mode", + "rfid_enable": "Rfid Enable", + "relock_enabled": "Relock Enabled", + "lock_mode": "Lock Mode", + "service_mode": "Service Mode", + "led_on_motion": "Led On Motion", "key_1": "Key 1", "key_2": "Key 2", "key_3": "Key 3", "key_4": "Key 4", + "key_state": "Key State", + "abs_min_heat_setpoint_limit": "Abs Min Heat Setpoint Limit", + "abs_max_heat_setpoint_limit": "Abs Max Heat Setpoint Limit", + "setpoint_change_source": "Setpoint Change Source", + "output_status": "Output Status", + "room_status_code": "Room Status Code", + "system_status_code": "System Status Code", + "system_status_water": "System Status Water", + "multimaster_role": "Multimaster Role", + "mounted_mode_active": "Mounted Mode Active", + "mounted_mode_control": "Mounted Mode Control", + "thermostat_vertical_orientation": "Thermostat Vertical Orientation", + "viewing_direction": "Viewing Direction", + "heat_available": "Heat Available", + "heat_required": "Heat Required", + "occupied_heating_setpoint_scheduled": "Occupied Heating Setpoint Scheduled", + "external_measured_room_sensor": "External Measured Room Sensor", + "radiator_covered": "Radiator Covered", + "window_open_feature": "Window Open Feature", + "window_open_internal": "Window Open Internal", + "window_open_external": "Window Open External", + "day_of_week": "Day Of Week", + "trigger_time": "Trigger Time", + "algorithm_scale_factor": "Algorithm Scale Factor", + "load_balancing_enable": "Load Balancing Enable", + "load_room_mean": "Load Room Mean", + "load_estimate": "Load Estimate", + "preheat_status": "Preheat Status", + "adaptation_run_status": "Adaptation Run Status", + "adaptation_run_settings": "Adaptation Run Settings", + "adaptation_run_control": "Adaptation Run Control", + "regulation_setpoint_offset": "Regulation Setpoint Offset", + "switch_type_1": "Switch Type 1", + "switch_type_2": "Switch Type 2", + "switch_type_3": "Switch Type 3", + "switch_type_4": "Switch Type 4", "report_delay": "Report Delay", "enable_temperature": "Enable Temperature", "high_temperature": "High Temperature", @@ -2051,6 +2472,15 @@ "auto_brightness": "Auto Brightness", "long_chart_period": "Long Chart Period", "local_time": "Local Time", + "l1": "L 1", + "l2": "L 2", + "l3": "L 3", + "l4": "L 4", + "l5": "L 5", + "l6": "L 6", + "l7": "L 7", + "l8": "L 8", + "transmit_power": "Transmit Power", "device_enabled": "Device Enabled", "group_id": "Group Id", "active_water_leak": "Active Water Leak", @@ -2058,161 +2488,34 @@ "active": "Active", "regulator_setpoint": "Regulator Setpoint", "air_temp": "Air Temp", + "ballast_power_on_level": "Ballast Power On Level", + "external_temperature": "External Temperature", + "hysteresis": "Hysteresis", + "max_temperature_protection": "Max Temperature Protection", + "device_type": "Device Type", + "calibration_closing_time": "Calibration Closing Time", + "calibration_opening_time": "Calibration Opening Time", + "siren_state": "Siren State", + "pre_alarm": "Pre Alarm", + "heartbeat": "Heartbeat", + "display_ontime": "Display Ontime", + "display_brightness": "Display Brightness", + "boost": "Boost", + "display_orientation": "Display Orientation", + "remote_temperature": "Remote Temperature", + "displayed_temperature": "Displayed Temperature", + "alarm_on_motion": "Alarm On Motion", + "control_sequence_of_operation": "Control Sequence Of Operation", + "low": "Low", + "high": "High", + "backlight_led": "Backlight Led", "swing_mode": "Swing Mode", "quiet_fan": "Quiet Fan", "smoke_state": "Smoke State", "checking_result": "Checking Result", "smoke_value": "Smoke Value", "lifecycle": "Lifecycle", - "self_checking": "Self Checking", - "silence": "Silence", - "feed": "Feed", - "feeding_source": "Feeding source", - "feeding_size": "Feeding size", - "portions_per_day": "Portions per day", - "weight_per_day": "Weight per day", - "error": "Error", - "serving_size": "Serving size", - "portion_weight": "Portion weight", - "setup": "Setup", - "calibrated": "Calibrated", - "valve_alarm": "Valve Alarm", - "schedule_settings": "Schedule settings", - "hand_open": "Hand open", - "limits_calibration": "Limits calibration", - "hooks_lock": "Hooks lock", - "region_upsert": "Region upsert", - "region_id": "Region ID", - "zones": "Zones", - "region_delete": "Region delete", - "on_level": "On Level", - "execute_if_off": "Execute if off", - "light": "Light", - "countdown": "Countdown", - "energy_a": "Energy A", - "energy_b": "Energy B", - "energy_c": "Energy C", - "voltage_a": "Voltage A", - "voltage_b": "Voltage B", - "voltage_c": "Voltage C", - "power_a": "Power A", - "power_b": "Power B", - "power_c": "Power C", - "current_a": "Current A", - "current_b": "Current B", - "current_c": "Current C", - "power_factor_a": "Power factor A", - "power_factor_b": "Power factor B", - "power_factor_c": "Power factor C", - "light_type": "Light type", - "gas_value": "Gas value", - "temperature_report_interval": "Temperature report interval", - "produced_energy": "Produced energy", - "threshold_1": "Threshold 1", - "threshold_1_protection": "Threshold 1 protection", - "threshold_1_value": "Threshold 1 value", - "threshold_2": "Threshold 2", - "threshold_2_protection": "Threshold 2 protection", - "threshold_2_value": "Threshold 2 value", - "clear_fault": "Clear fault", - "meter_id": "Metrr ID", - "smoke_concentration": "Smoke concentration", - "device_fault": "Device fault", - "alarm_switch": "Alarm switch", - "scale_protection": "Scale protection", - "working_day": "Working day", - "week_day": "Week day", - "self_test_result": "Self test result", - "alarm_ringtone": "Alarm ringtone", - "alarm_time": "Alarm time", - "preheat": "Preheat", - "timer_seconds": "Timer seconds", - "led_color_on": "LED color on", - "r": "R", - "g": "G", - "b": "B", - "led_color_off": "LED color off", - "thermostat_occupancy": "Thermostat occupancy", - "enable_outdoor_temperature": "Enable outdoor temperature", - "temperature_display_mode": "Temperature display mode", - "time_format": "Time format", - "connected_load": "Connected load", - "floor_control_mode": "Floor controle mode", - "floor_max_heat_setpoint": "Floor max heat setpoint", - "floor_min_heat_setpoint": "Floor min heat setpoint", - "ambiant_max_heat_setpoint": "Ambiant max heat setpoint", - "floor_temperature_sensor": "Floor temperature sensor", - "main_cycle_output": "Main cycle output", - "aux_cycle_output": "AUX cycle output", - "pump_protection": "Pump protection", - "aux_connected_load": "AUX connected load", - "transaction": "Transaction", - "identify": "Identify", - "hact_config": "HACT config", - "fip_setting": "FIP setting", - "occupied_heating_setpoint_scheduled": "Occupied heating setpoint scheduled", - "gradient": "Gradient", - "humidity_report_interval": "Humidity report interval", - "humidity_sensitivity": "Humidity sensitivity", - "display_brightnesss": "Display brightness", - "display_auto_off": "Display auto off", - "power_up_status": "Power up status", - "min_temperature_limit": "Min temperature limit", - "program": "Program", - "weekdays_p1_hour": "Weekdays P1 hour", - "weekdays_p1_minute": "Weekdays P1 minute", - "weekdays_p1_temperature": "Weekdays P1 temperature", - "weekdays_p2_hour": "Weekdays P2 hour", - "weekdays_p2_minute": "Weekdays P2 minute", - "weekdays_p2_temperature": "Weekdays P2 temperature", - "weekdays_p3_hour": "Weekdays P3 hour", - "weekdays_p3_minute": "Weekdays P3 minute", - "weekdays_p3_temperature": "Weekdays P3 temperature", - "weekdays_p4_hour": "Weekdays P4 hour", - "weekdays_p4_minute": "Weekdays P4 minute", - "weekdays_p4_temperature": "Weekdays P4 temperature", - "saturday_p1_hour": "Saturday P1 hour", - "saturday_p1_minute": "Saturday P1 minute", - "saturday_p1_temperature": "Saturday P1 temperature", - "saturday_p2_hour": "Saturday P2 hour", - "saturday_p2_minute": "Saturday P2 minute", - "saturday_p2_temperature": "Saturday P2 temperature", - "saturday_p3_hour": "Saturday P3 hour", - "saturday_p3_minute": "Saturday P3 minute", - "saturday_p3_temperature": "Saturday P3 temperature", - "saturday_p4_hour": "Saturday P4 hour", - "saturday_p4_minute": "Saturday P4 minute", - "saturday_p4_temperature": "Saturday P4 temperature", - "sunday_p1_hour": "Sunday P1 hour", - "sunday_p1_minute": "Sunday P1 minute", - "sunday_p1_temperature": "Sunday P1 temperature", - "sunday_p2_hour": "Sunday P2 hour", - "sunday_p2_minute": "Sunday P2 minute", - "sunday_p2_temperature": "Sunday P2 temperature", - "sunday_p3_hour": "Sunday P3 hour", - "sunday_p3_minute": "Sunday P3 minute", - "sunday_p3_temperature": "Sunday P3 temperature", - "sunday_p4_hour": "Sunday P4 hour", - "sunday_p4_minute": "Sunday P4 minute", - "sunday_p4_temperature": "Sunday P4 temperature", - "auto_mode": "Auto mode", - "buttonDelay": "Button delay", - "doubleTapUpForFullBrightness": "Double tap up for full brightness", - "relayClick": "Relay click", - "doubleTapClearNotifications": "Double tap clear notifications", - "voc_index": "VOC index", - "rain": "Rain", - "input": "Input", - "led_on_motion": "LED on motion", - "transmit_power": "Transmit power", - "siren_state": "Siren state", - "pre_alarm": "Pre alarm", - "heartbeat": "Heartbeat", - "boost": "Boost", - "display_orientation": "Display orientation", - "display_ontime": "Display ontime", - "display_brightness": "Display brightness", - "control_sequence_of_operation": "Control sequence of operation" + "self_checking": "Self Checking" }, "groups": { "add_to_group": "Add to group", @@ -2405,13 +2708,17 @@ }, "settingsSchemaDescriptions": { "Home Assistant integration (MQTT discovery)": "Home Assistant integration (MQTT discovery)", + "Home Assistant legacy triggers, when enabled Zigbee2mqt will send an empty 'action' or 'click' after one has been send. A 'sensor_action' and 'sensor_click' will be discoverd": "Home Assistant legacy triggers, when enabled Zigbee2mqt will send an empty 'action' or 'click' after one has been send. A 'sensor_action' and 'sensor_click' will be discoverd", + "Home Assistant discovery topic": "Home Assistant discovery topic", + "Home Assistant legacy entity attributes, when enabled Zigbee2MQTT will add state attributes to each entity, additional to the separate entities and devices it already creates": "Home Assistant legacy entity attributes, when enabled Zigbee2MQTT will add state attributes to each entity, additional to the separate entities and devices it already creates", + "Home Assistant status topic": "Home Assistant status topic", "Allow new devices to join (re-applied at restart)": "Allow new devices to join (re-applied at restart)", - "You can define external converters to e.g. add support for a DiY device": "You can define external converters to e.g. add support for a DiY device", "Options for active devices (routers/mains powered)": "Options for active devices (routers/mains powered)", "Time after which an active device will be marked as offline in minutes": "Time after which an active device will be marked as offline in minutes", "Options for passive devices (mostly battery powered)": "Options for passive devices (mostly battery powered)", "Time after which an passive device will be marked as offline in minutes": "Time after which an passive device will be marked as offline in minutes", "Checks whether devices are online/offline": "Checks whether devices are online/offline", + "You can define external converters to e.g. add support for a DiY device": "You can define external converters to e.g. add support for a DiY device", "MQTT base topic for Zigbee2MQTT MQTT messages": "MQTT base topic for Zigbee2MQTT MQTT messages", "MQTT server URL (use mqtts:// for SSL/TLS connection)": "MQTT server URL (use mqtts:// for SSL/TLS connection)", "MQTT keepalive in second": "MQTT keepalive in second", @@ -2428,37 +2735,28 @@ "Location of the adapter. To autodetect the port, set null": "Location of the adapter. To autodetect the port, set null", "Disable LED of the adapter if supported": "Disable LED of the adapter if supported", "Adapter type, not needed unless you are experiencing problems": "Adapter type, not needed unless you are experiencing problems", + "Baud rate speed for serial port, this can be anything firmware support but default is 115200 for Z-Stack and EZSP, 38400 for Deconz, however note that some EZSP firmware need 57600": "Baud rate speed for serial port, this can be anything firmware support but default is 115200 for Z-Stack and EZSP, 38400 for Deconz, however note that some EZSP firmware need 57600", + "RTS / CTS Hardware Flow Control for serial port": "RTS / CTS Hardware Flow Control for serial port", "Block devices from the network (by ieeeAddr)": "Block devices from the network (by ieeeAddr)", "Allow only certain devices to join the network (by ieeeAddr). Note that all devices not on the passlist will be removed from the network!": "Allow only certain devices to join the network (by ieeeAddr). Note that all devices not on the passlist will be removed from the network!", - "Transmit power of adapter, only available for Z-Stack (CC253*/CC2652/CC1352) adapters, CC2652 = 5dbm, CC1352 max is = 20dbm (5dbm default)": "Transmit power of adapter, only available for Z-Stack (CC253*/CC2652/CC1352) adapters, CC2652 = 5dbm, CC1352 max is = 20dbm (5dbm default)", - "Examples when 'state' of a device is published json: topic: 'zigbee2mqtt/my_bulb' payload '{\"state\": \"ON\"}' attribute: topic 'zigbee2mqtt/my_bulb/state' payload 'ON' attribute_and_json: both json and attribute (see above)": "Examples when 'state' of a device is published json: topic: 'zigbee2mqtt/my_bulb' payload '{\"state\": \"ON\"}' attribute: topic 'zigbee2mqtt/my_bulb/state' payload 'ON' attribute_and_json: both json and attribute (see above)", + "Your device may request a check for a new firmware update. This value determines how frequently third party servers may actually be contacted to look for firmware updates. The value is set in minutes, and the default is 1 day.": "Your device may request a check for a new firmware update. This value determines how frequently third party servers may actually be contacted to look for firmware updates. The value is set in minutes, and the default is 1 day.", + "Zigbee devices may request a firmware update, and do so frequently, causing Zigbee2MQTT to reach out to third party servers. If you disable these device initiated checks, you can still initiate a firmware update check manually.": "Zigbee devices may request a firmware update, and do so frequently, causing Zigbee2MQTT to reach out to third party servers. If you disable these device initiated checks, you can still initiate a firmware update check manually.", + "Use IKEA TRADFRI OTA test server, see OTA updates documentation": "Use IKEA TRADFRI OTA test server, see OTA updates documentation", + "Location of override OTA index file": "Location of override OTA index file", + "Frontend binding port. Ignored when using a unix domain socket": "Frontend binding port. Ignored when using a unix domain socket", + "Frontend binding host. Binds to a unix socket when an absolute path is given instead.": "Frontend binding host. Binds to a unix socket when an absolute path is given instead.", + "Enables authentication, disabled by default": "Enables authentication, disabled by default", + "URL on which the frontend can be reached, currently only used for the Home Assistant device configuration page": "URL on which the frontend can be reached, currently only used for the Home Assistant device configuration page", + "SSL Certificate file path for exposing HTTPS. The sibling property 'ssl_key' must be set for HTTPS to be activated.": "SSL Certificate file path for exposing HTTPS. The sibling property 'ssl_key' must be set for HTTPS to be activated.", + "SSL key file path for exposing HTTPS. The sibling property 'ssl_cert' must be set for HTTPS to be activated.": "SSL key file path for exposing HTTPS. The sibling property 'ssl_cert' must be set for HTTPS to be activated.", "Disables the legacy api (false = disable)": "Disables the legacy api (false = disable)", - "ZigBee pan ID, changing requires repairing all devices!": "ZigBee pan ID, changing requires repairing all devices!", - "Zigbee extended pan ID, changing requires repairing all devices!": "Zigbee extended pan ID, changing requires repairing all devices!", - "Zigbee channel, changing requires repairing all devices! (Note: use a ZLL channel: 11, 15, 20, or 25 to avoid Problems)": "Zigbee channel, changing requires repairing all devices! (Note: use a ZLL channel: 11, 15, 20, or 25 to avoid Problems)", - "MQTT message payload will contain all attributes, not only changed ones. Has to be true when integrating via Home Assistant": "MQTT message payload will contain all attributes, not only changed ones. Has to be true when integrating via Home Assistant", - "Persist cached state, only used when cache_state: true": "Persist cached state, only used when cache_state: true", - "Send cached state on startup, only used when cache_state: true": "Send cached state on startup, only used when cache_state: true", + "Payload to be used for device availability and bridge/state topics. true = text, false = JSON": "Payload to be used for device availability and bridge/state topics. true = text, false = JSON", "Log rotation": "Log rotation", "Create symlink to current logs in the log directory": "Create symlink to current logs in the log directory", - "Logging level": "Logging level", + "Output location of the log, leave empty to suppress logging": "Output location of the log, leave empty to suppress logging", "Location of log directory": "Location of log directory", "Log file name, can also contain timestamp": "Log file name, can also contain timestamp", - "Baud rate speed for serial port, this can be anything firmware support but default is 115200 for Z-Stack and EZSP, 38400 for Deconz, however note that some EZSP firmware need 57600": "Baud rate speed for serial port, this can be anything firmware support but default is 115200 for Z-Stack and EZSP, 38400 for Deconz, however note that some EZSP firmware need 57600", - "RTS / CTS Hardware Flow Control for serial port": "RTS / CTS Hardware Flow Control for serial port", - "Soft reset ZNP after timeout": "Soft reset ZNP after timeout", - "Network encryption key, changing requires repairing all devices!": "Network encryption key, changing requires repairing all devices!", - "Add a last_seen attribute to MQTT messages, contains date/time of last Zigbee message": "Add a last_seen attribute to MQTT messages, contains date/time of last Zigbee message", - "Add an elapsed attribute to MQTT messages, contains milliseconds since the previous msg": "Add an elapsed attribute to MQTT messages, contains milliseconds since the previous msg", - "Enables report feature (deprecated)": "Enables report feature (deprecated)", - "Home Assistant discovery topic": "Home Assistant discovery topic", - "Home Assistant legacy entity attributes, when enabled Zigbee2MQTT will add state attributes to each entity, additional to the separate entities and devices it already creates": "Home Assistant legacy entity attributes, when enabled Zigbee2MQTT will add state attributes to each entity, additional to the separate entities and devices it already creates", - "Home Assistant status topic": "Home Assistant status topic", - "Log timestamp format": "Log timestamp format", - "Adapter concurrency (e.g. 2 for CC2531 or 16 for CC26X2R1) (default: null, uses recommended value)": "Adapter concurrency (e.g. 2 for CC2531 or 16 for CC26X2R1) (default: null, uses recommended value)", - "Adapter delay": "Adapter delay", - "Use IKEA TRADFRI OTA test server, see OTA updates documentation": "Use IKEA TRADFRI OTA test server, see OTA updates documentation", - "Home Assistant legacy triggers, when enabled Zigbee2mqt will send an empty 'action' or 'click' after one has been send. A 'sensor_action' and 'sensor_click' will be discoverd": "Home Assistant legacy triggers, when enabled Zigbee2mqt will send an empty 'action' or 'click' after one has been send. A 'sensor_action' and 'sensor_click' will be discoverd", + "Logging level": "Logging level", "The host running syslogd, defaults to localhost.": "The host running syslogd, defaults to localhost.", "The port on the host that syslog is running on, defaults to syslogd's default port.": "The port on the host that syslog is running on, defaults to syslogd's default port.", "The network protocol to log over (e.g. tcp4, udp4, tls4, unix, unix-connect, etc).": "The network protocol to log over (e.g. tcp4, udp4, tls4, unix, unix-connect, etc).", @@ -2468,43 +2766,54 @@ "The type of the syslog protocol to use (Default: BSD, also valid: 5424).": "The type of the syslog protocol to use (Default: BSD, also valid: 5424).", "The name of the application (Default: Zigbee2MQTT).": "The name of the application (Default: Zigbee2MQTT).", "The end of line character to be added to the end of the message (Default: Message without modifications).": "The end of line character to be added to the end of the message (Default: Message without modifications).", - "Your device may request a check for a new firmware update. This value determines how frequently third party servers may actually be contacted to look for firmware updates. The value is set in minutes, and the default is 1 day.": "Your device may request a check for a new firmware update. This value determines how frequently third party servers may actually be contacted to look for firmware updates. The value is set in minutes, and the default is 1 day.", - "Zigbee devices may request a firmware update, and do so frequently, causing Zigbee2MQTT to reach out to third party servers. If you disable these device initiated checks, you can still initiate a firmware update check manually.": "Zigbee devices may request a firmware update, and do so frequently, causing Zigbee2MQTT to reach out to third party servers. If you disable these device initiated checks, you can still initiate a firmware update check manually.", - "Frontend binding port": "Frontend binding port", - "Frontend binding host": "Frontend binding host", - "Enables authentication, disabled by default": "Enables authentication, disabled by default", + "ZigBee pan ID, changing requires repairing all devices!": "ZigBee pan ID, changing requires repairing all devices!", + "Zigbee extended pan ID, changing requires repairing all devices!": "Zigbee extended pan ID, changing requires repairing all devices!", + "Zigbee channel, changing requires repairing all devices! (Note: use a ZLL channel: 11, 15, 20, or 25 to avoid Problems)": "Zigbee channel, changing requires repairing all devices! (Note: use a ZLL channel: 11, 15, 20, or 25 to avoid Problems)", + "Adapter concurrency (e.g. 2 for CC2531 or 16 for CC26X2R1) (default: null, uses recommended value)": "Adapter concurrency (e.g. 2 for CC2531 or 16 for CC26X2R1) (default: null, uses recommended value)", + "Adapter delay": "Adapter delay", + "MQTT message payload will contain all attributes, not only changed ones. Has to be true when integrating via Home Assistant": "MQTT message payload will contain all attributes, not only changed ones. Has to be true when integrating via Home Assistant", + "Persist cached state, only used when cache_state: true": "Persist cached state, only used when cache_state: true", + "Send cached state on startup, only used when cache_state: true": "Send cached state on startup, only used when cache_state: true", + "Add a last_seen attribute to MQTT messages, contains date/time of last Zigbee message": "Add a last_seen attribute to MQTT messages, contains date/time of last Zigbee message", + "Add an elapsed attribute to MQTT messages, contains milliseconds since the previous msg": "Add an elapsed attribute to MQTT messages, contains milliseconds since the previous msg", + "Network encryption key, changing requires repairing all devices!": "Network encryption key, changing requires repairing all devices!", + "Log timestamp format": "Log timestamp format", + "Transmit power of adapter, only available for Z-Stack (CC253*/CC2652/CC1352) adapters, CC2652 = 5dbm, CC1352 max is = 20dbm (5dbm default)": "Transmit power of adapter, only available for Z-Stack (CC253*/CC2652/CC1352) adapters, CC2652 = 5dbm, CC1352 max is = 20dbm (5dbm default)", + "Examples when 'state' of a device is published json: topic: 'zigbee2mqtt/my_bulb' payload '{\"state\": \"ON\"}' attribute: topic 'zigbee2mqtt/my_bulb/state' payload 'ON' attribute_and_json: both json and attribute (see above)": "Examples when 'state' of a device is published json: topic: 'zigbee2mqtt/my_bulb' payload '{\"state\": \"ON\"}' attribute: topic 'zigbee2mqtt/my_bulb/state' payload 'ON' attribute_and_json: both json and attribute (see above)", + "Home Assistant legacy triggers, when enabled Zigbee2mqt will send an empty 'action' or 'click' after one has been send. A 'sensor_action' and 'sensor_click' will be discovered": "Home Assistant legacy triggers, when enabled Zigbee2mqt will send an empty 'action' or 'click' after one has been send. A 'sensor_action' and 'sensor_click' will be discovered", + "Soft reset ZNP after timeout": "Soft reset ZNP after timeout", + "Enables report feature (deprecated)": "Enables report feature (deprecated)", "Used in the MQTT topic of a device. By default this is the device ID": "Used in the MQTT topic of a device. By default this is the device ID", "Retain MQTT messages of this device": "Retain MQTT messages of this device", + "Disables the device (excludes device from network scans, availability and group state updates)": "Disables the device (excludes device from network scans, availability and group state updates)", "Sets the MQTT Message Expiry in seconds, Make sure to set mqtt.version to 5": "Sets the MQTT Message Expiry in seconds, Make sure to set mqtt.version to 5", "QoS level for MQTT messages of this device": "QoS level for MQTT messages of this device", "Debounces messages of this device": "Debounces messages of this device", "Protects unique payload values of specified payload properties from overriding within debounce time": "Protects unique payload values of specified payload properties from overriding within debounce time", "Publish optimistic state after set": "Publish optimistic state after set", - "The user-defined device icon for the frontend. It can be a link to an image (not a path to a file) or base64 encoded data URL like: image/svg+xml;base64,PHN2ZyB3aW....R0aD": "The user-defined device icon for the frontend. It can be a link to an image (not a path to a file) or base64 encoded data URL like: image/svg+xml;base64,PHN2ZyB3aW....R0aD", - "Location of override OTA index file": "Location of override OTA index file", - "URL on which the frontend can be reached, currently only used for the Home Assistant device configuration page": "URL on which the frontend can be reached, currently only used for the Home Assistant device configuration page", - "Output location of the log, leave empty to suppress logging": "Output location of the log, leave empty to suppress logging", - "Home Assistant legacy triggers, when enabled Zigbee2mqt will send an empty 'action' or 'click' after one has been send. A 'sensor_action' and 'sensor_click' will be discovered": "Home Assistant legacy triggers, when enabled Zigbee2mqt will send an empty 'action' or 'click' after one has been send. A 'sensor_action' and 'sensor_click' will be discovered", - "Payload to be used for device availabilty and bridge/state topics. true = text, false = JSON": "Payload to be used for device availabilty and bridge/state topics. true = text, false = JSON", - "Name of the device in Home Assistant": "Name of the device in Home Assistant", - "Control when to publish state OFF for a group. 'all_members_off': only publish state OFF when all group memebers are in state OFF, 'last_member_state': publish state OFF whenever one of its members changes to OFF": "Control when to publish state OFF for a group. 'all_members_off': only publish state OFF when all group memebers are in state OFF, 'last_member_state': publish state OFF whenever one of its members changes to OFF", "Filter attributes with regex from published payload.": "Filter attributes with regex from published payload.", "Filter attributes with regex from being added to the cache, this prevents the attribute from being in the published payload when the value didn't change.": "Filter attributes with regex from being added to the cache, this prevents the attribute from being in the published payload when the value didn't change.", "Filter attributes with regex from optimistic publish payload when calling /set. (This has no effect if optimistic is set to false).": "Filter attributes with regex from optimistic publish payload when calling /set. (This has no effect if optimistic is set to false).", - "SSL Certificate file path for exposing HTTPS. The sibling property 'ssl_key' must be set for HTTPS to be activated.": "SSL Certificate file path for exposing HTTPS. The sibling property 'ssl_key' must be set for HTTPS to be activated.", - "SSL key file path for exposing HTTPS. The sibling property 'ssl_cert' must be set for HTTPS to be activated.": "SSL key file path for exposing HTTPS. The sibling property 'ssl_cert' must be set for HTTPS to be activated.", - "Disables the device (excludes device from network scans, availability and group state updates)": "Disables the device (excludes device from network scans, availability and group state updates)", "The user-defined device icon for the frontend. It can be a full URL link to an image (e.g. https://SOME.SITE/MODEL123.jpg) (you cannot use a path to a local file) or base64 encoded data URL (e.g. image/svg+xml;base64,PHN2ZyB3aW....R0aD)": "The user-defined device icon for the frontend. It can be a full URL link to an image (e.g. https://SOME.SITE/MODEL123.jpg) (you cannot use a path to a local file) or base64 encoded data URL (e.g. image/svg+xml;base64,PHN2ZyB3aW....R0aD)", - "Frontend binding port. Ignored when using a unix domain socket": "Frontend binding port. Ignored when using a unix domain socket", - "Frontend binding host. Binds to a unix socket when an absolute path is given instead.": "Frontend binding host. Binds to a unix socket when an absolute path is given instead" + "Name of the device in Home Assistant": "Name of the device in Home Assistant", + "Control when to publish state OFF for a group. 'all_members_off': only publish state OFF when all group members are in state OFF, 'last_member_state': publish state OFF whenever one of its members changes to OFF": "Control when to publish state OFF for a group. 'all_members_off': only publish state OFF when all group members are in state OFF, 'last_member_state': publish state OFF whenever one of its members changes to OFF" }, "settingsSchemaTitles": { "Home Assistant integration": "Home Assistant integration", + "Home Assistant (simple)": "Home Assistant (simple)", + "Home Assistant (advanced)": "Home Assistant (advanced)", + "Home Assistant legacy triggers": "Home Assistant legacy triggers", + "Homeassistant discovery topic": "Homeassistant discovery topic", + "Home Assistant legacy entity attributes": "Home Assistant legacy entity attributes", + "Home Assistant status topic": "Home Assistant status topic", "Permit join": "Permit join", - "External converters": "External converters", + "Availability (simple)": "Availability (simple)", + "Availability (advanced)": "Availability (advanced)", "Active": "Active", "Timeout": "Timeout", + "Passive": "Passive", "Availability": "Availability", + "External converters": "External converters", "MQTT": "MQTT", "Base topic": "Base topic", "MQTT server": "MQTT server", @@ -2523,45 +2832,34 @@ "Port": "Port", "Disable led": "Disable led", "Adapter": "Adapter", + "Baudrate": "Baudrate", + "RTS / CTS": "RTS / CTS", "Blocklist": "Blocklist", "Passlist": "Passlist", - "Whitelist (deprecated, use passlist)": "Whitelist (deprecated, use passlist)", - "Ban (deprecated, use blocklist)": "Ban (deprecated, use blocklist)", - "Transmit power": "Transmit power", - "MQTT output type": "MQTT output type", + "Networkmap": "Networkmap", + "OTA updates": "OTA updates", + "Update check interval": "Update check interval", + "Disable automatic update check": "Disable automatic update check", + "IKEA TRADFRI OTA use test url": "IKEA TRADFRI OTA use test url", + "OTA index override file name": "OTA index override file name", + "Frontend (simple)": "Frontend (simple)", + "Frontend (advanced)": "Frontend (advanced)", + "Bind host": "Bind host", + "Auth token": "Auth token", + "URL": "URL", + "Certificate file path": "Certificate file path", + "key file path": "key file path", + "Frontend": "Frontend", + "Options that are applied to all devices": "Options that are applied to all devices", "Advanced": "Advanced", "Legacy API": "Legacy API", - "Pan ID (string)": "Pan ID (string)", - "Pan ID (number)": "Pan ID (number)", - "Pan ID": "Pan ID", - "Ext Pan ID": "Ext Pan ID", - "ZigBee channel": "ZigBee channel", - "Cache state": "Cache state", - "Persist cache state": "Persist cache state", - "Send cached state on startup": "Send cached state on startup", + "Legacy availability payload": "Legacy availability payload", "Log rotation": "Log rotation", "Log symlink current": "Log symlink current", - "Log level": "Log level", "Log output": "Log output", "Log directory": "Log directory", "Log file": "Log file", - "Baudrate": "Baudrate", - "RTS / CTS": "RTS / CTS", - "Soft reset timeout (deprecated)": "Soft reset timeout (deprecated)", - "Network key(string)": "Network key(string)", - "Network key(array)": "Network key(array)", - "Network key": "Network key", - "Last seen": "Last seen", - "Elapsed": "Elapsed", - "Reporting": "Reporting", - "Homeassistant discovery topic": "Homeassistant discovery topic", - "Home Assistant legacy entity attributes": "Home Assistant legacy entity attributes", - "Home Assistant status topic": "Home Assistant status topic", - "Timestamp format": "Timestamp format", - "Adapter concurrency": "Adapter concurrency", - "Adapter delay": "Adapter delay", - "IKEA TRADFRI OTA use test url": "IKEA TRADFRI OTA use test url", - "Home Assistant legacy triggers": "Home Assistant legacy triggers", + "Log level": "Log level", "syslog": "syslog", "Host": "Host", "Protocol": "Protocol", @@ -2570,46 +2868,48 @@ "Localhost": "Localhost", "Type": "Type", "eol": "eol", - "Networkmap": "Networkmap", - "OTA updates": "OTA updates", - "Update check interval": "Update check interval", - "Disable automatic update check": "Disable automatic update check", - "Frontend": "Frontend", - "Bind host": "Bind host", - "Auth token": "Auth token", + "Pan ID (string)": "Pan ID (string)", + "Pan ID (number)": "Pan ID (number)", + "Pan ID": "Pan ID", + "Extended pan ID (string)": "Extended pan ID (string)", + "Extended pan ID (array)": "Extended pan ID (array)", + "Ext Pan ID": "Ext Pan ID", + "ZigBee channel": "ZigBee channel", + "Adapter concurrency": "Adapter concurrency", + "Adapter delay": "Adapter delay", + "Cache state": "Cache state", + "Persist cache state": "Persist cache state", + "Send cached state on startup": "Send cached state on startup", + "Last seen": "Last seen", + "Elapsed": "Elapsed", + "Network key(string)": "Network key(string)", + "Network key(array)": "Network key(array)", + "Network key": "Network key", + "Timestamp format": "Timestamp format", + "Transmit power": "Transmit power", + "MQTT output type": "MQTT output type", + "Soft reset timeout (deprecated)": "Soft reset timeout (deprecated)", + "Reporting": "Reporting", + "Baudrate (deprecated)": "Baudrate (deprecated)", + "RTS / CTS (deprecated)": "RTS / CTS (deprecated)", + "IKEA TRADFRI OTA use test url (deprecated)": "IKEA TRADFRI OTA use test url (deprecated)", + "Experimental (deprecated)": "Experimental (deprecated)", + "Whitelist (deprecated, use passlist)": "Whitelist (deprecated, use passlist)", + "Ban (deprecated, use blocklist)": "Ban (deprecated, use blocklist)", "Friendly name": "Friendly name", "Retain": "Retain", + "Disabled": "Disabled", "Retention": "Retention", "QoS": "QoS", "Debounce": "Debounce", "Ignore debounce": "Ignore debounce", "Optimistic": "Optimistic", - "Filtered optimistic attributes": "Filtered optimistic attributes", "Filtered publish attributes": "Filtered publish attributes", + "Filtered attributes from cache": "Filtered attributes from cache", + "Filtered optimistic attributes": "Filtered optimistic attributes", "Icon": "Icon", - "Passive": "Passive", - "Home Assistant (simple)": "Home Assistant (simple)", - "Home Assistant (advanced)": "Home Assistant (advanced)", - "Availability (simple)": "Availability (simple)", - "Availability (advanced)": "Availability (advanced)", - "OTA index override file name": "OTA index override file name", - "Frontend (simple)": "Frontend (simple)", - "Frontend (advanced)": "Frontend (advanced)", - "URL": "URL", - "Options that are applied to all devices": "Options that are applied to all devices", - "Baudrate (deprecated)": "Baudrate (deprecated)", - "RTS / CTS (deprecated)": "RTS / CTS (deprecated)", - "IKEA TRADFRI OTA use test url (deprecated)": "IKEA TRADFRI OTA use test url (deprecated)", - "Experimental (deprecated)": "Experimental (deprecated)", - "Legacy availability payload": "Legacy availability payload", "Home Assistant": "Home Assistant", "Home Assistant name": "Home Assistant name", - "Group off state": "Group off state", - "Filtered attributes from cache": "Filtered attributes from cache", - "Certificate file path": "Certificate file path", - "key file path": "key file path", - "Disabled": "Disabled", - "Extended pan ID (string)": "Extended pan ID (string)", - "Extended pan ID (array)": "Extended pan ID (array)" + "Group off state": "Group off state" } } \ No newline at end of file