!! NOTICE !!
When using linuxserver/fail2ban, the *.conf files in this directory and its subdirectories will be replaced every time the container restarts. The files are meant to be easily viewed so that you can reference them.
If you would like to customize anything, create a *.local file with the same name as the *.conf file and apply your customizations. You do not need to copy the entire *.conf file to *.local, you only need to include things you want to change.
For example, to adjust jail.conf, create jail.local and apply your customizations there.
Fail2ban will combine action configurations in the following order:
action.d/*.conf (in alphabetical order)
action.d/*.local (in alphabetical order)
Fail2ban will combine filter configurations in the following order:
filter.d/*.conf (in alphabetical order)
filter.d/*.local (in alphabetical order)
Fail2ban will combine jail configurations in the following order:
jail.conf
jail.d/*.conf (in alphabetical order)
jail.local
jail.d/*.local (in alphabetical order)
Chains affect how access is restricted. There are two primary ways to restrict access.
The DOCKER-USER chain is used to restrict access to applications running in Docker containers. This will restrict access to all containers, not just the one that the jail is configured for.
The INPUT chain is used to restrict access to applications running on the host. This will restrict access to the host network stack. The host network stack may not be inclusive of all Docker network stacks, thus the DOCKER-USER chain is used separately for applications running in Docker containers.
The FORWARD chain may be used on systems running older versions of Docker where the DOCKER-USER chain is not available.
These are examples of what you can do in your jail.local. There is no universally correct way to setup jail.local as it depends on your needs.
You can enable any of the pre-made jails by reviewing the files in jail.d/ and adding a few lines to your jail.local to enable the jail.
This example shows how to enable jails for sshd on the host, and SWAG (nginx) running in a container. It also includes some general recommendations and optional lines commented out.
In order for bans to work correctly, the INPUT chain should be used for applications running on the host, and the DOCKER-USER chain should be used for applications running in containers.
In this basic example:
sshdexpects ssh to be running on the host (not in a container), so theINPUTchain is usednginx-http-authexpects nginx to be running in a container (ex: SWAG), so theDOCKER-USERchain is used
[DEFAULT]
# Prevents banning LAN subnets
ignoreip = 127.0.0.1/8 ::1
10.0.0.0/8
172.16.0.0/12
192.168.0.0/16
# The ban action "iptables-multiport" (default) should work for most
# The ban action "iptables-allports" can be used if multiport causes issues
#banaction = %(banaction_allports)s
[sshd]
# configuration inherits from jail.conf
enabled = true
chain = INPUT
action = %(known/action)s
[nginx-http-auth]
# configuration inherits from jail.conf
enabled = true
chain = DOCKER-USER
action = %(known/action)s
[nginx-badbots]
# configuration inherits from jail.d/nginx-badbots.conf
enabled = true
chain = DOCKER-USER
action = %(known/action)s
[nginx-botsearch]
# configuration inherits from jail.conf
enabled = true
chain = DOCKER-USER
action = %(known/action)s
[nginx-deny]
# configuration inherits from jail.d/nginx-deny.conf
enabled = true
chain = DOCKER-USER
action = %(known/action)s
[nginx-unauthorized]
# configuration inherits from jail.d/nginx-unauthorized.conf
enabled = true
chain = DOCKER-USER
action = %(known/action)sThis example only includes the configurations for incremental banning. You can add these lines to the [DEFAULT] section of your existing config.
With these configurations, after an IP is unbanned, if it gets banned again the ban time will increase exponentially.
[DEFAULT]
# "bantime.increment" allows to use database for searching of previously banned ip's to increase a
# default ban time
bantime.increment = true
# "bantime.maxtime" is the max number of seconds using the ban time can reach (doesn't grow further)
bantime.maxtime = 5w
# "bantime.factor" is a coefficient to calculate exponent growing of the formula or common multiplier
bantime.factor = 24
# "bantime" is the number of seconds that a host is banned.
bantime = 1h
# A host is banned if it has generated "maxretry" during the last "findtime"
# seconds.
findtime = 24h
# "maxretry" is the number of failures before a host get banned.
maxretry = 5Add these lines to your jail.local to enable jails for unRAID's sshd and Web GUI.
The port line for the Web GUI is optional, but if you use unRAID's My Servers plugin to enable public access you should add the port you use (replace YOUR-UNRAID-MY-SERVERS-WAN-PORT)
Both of these jails protect unRAID at the host level using the INPUT chain.
[unraid-sshd]
# configuration inherits from jail.d/unraid-sshd.conf
enabled = true
chain = INPUT
action = %(known/action)s
[unraid-webgui]
# configuration inherits from jail.d/unraid-webgui.conf
enabled = true
chain = INPUT
port = http,https,YOUR-UNRAID-MY-SERVERS-WAN-PORT
action = %(known/action)sAdd these lines to enable the jail for Unifi-Controller.
[unifi-controller-auth]
# configuration inherits from jail.d/unifi-controller-auth.conf
enabled = true
chain = DOCKER-USER
action = %(known/action)sThe default action will use iptables to perform bans. You may also apply bans using other services such as CloudFlare, report bans to services such as AbuseIPDB, or setup notifications for with services such as Apprise or Discord Webhooks.
[DEFAULT]
# Apply additional actions to all bans with all jails
action = %(action_)s
apprise-api[host="127.0.0.1", tag="fail2ban"]
cloudflare[cfuser="YOUR-EMAIL", cftoken="YOUR-TOKEN"]
discord-webhook[webhook="https://discord.com/api/webhooks/######/######"]
abuseipdb_apikey = YOUR-API-KEY
[sshd]
# Apply additional actions only to bans for the sshd jail
action = %(known/action)s
abuseipdb[abuseipdb_apikey="%(abuseipdb_apikey)s", abuseipdb_category="18,22"]
[unifi-controller-auth]
# Apply additional actions only to bans for the unifi-controller-auth jail
action = %(known/action)s
abuseipdb[abuseipdb_apikey="%(abuseipdb_apikey)s", abuseipdb_category="18,21"]
[DEFAULT]
# "bantime.increment" allows to use database for searching of previously banned ip's to increase a
# default ban time
bantime.increment = true
# "bantime.maxtime" is the max number of seconds using the ban time can reach (doesn't grow further)
bantime.maxtime = 5w
# "bantime.factor" is a coefficient to calculate exponent growing of the formula or common multiplier
bantime.factor = 24
# "bantime" is the number of seconds that a host is banned.
bantime = 1h
# A host is banned if it has generated "maxretry" during the last "findtime"
# seconds.
findtime = 24h
# "maxretry" is the number of failures before a host get banned.
maxretry = 5
# Prevents banning LAN subnets
ignoreip = 127.0.0.1/8 ::1
10.0.0.0/8
172.16.0.0/12
192.168.0.0/16
# The ban action "iptables-multiport" (default) should work for most
# The ban action "iptables-allports" can be used if multiport causes issues
#banaction = %(banaction_allports)s
# Read https://github.com/sebres/PoC/blob/master/FW.IDS-DROP-vs-REJECT/README.md before changing block type
# The block type "REJECT --reject-with icmp-port-unreachable" (default behavior) should respond to, but then instantly reject connection attempts
# The block type "DROP" should not respond to connection attempts, resulting in a timeout
#banaction = iptables-multiport[blocktype=DROP]
# Add additional actions
action = %(action_)s
apprise-api[host="127.0.0.1", tag="fail2ban"]
cloudflare[cfuser="YOUR-EMAIL", cftoken="YOUR-TOKEN"]
abuseipdb_apikey = YOUR-API-KEY
[unraid-sshd]
# configuration inherits from jail.d/unraid-sshd.conf
enabled = true
chain = INPUT
action = %(known/action)s
abuseipdb[abuseipdb_apikey="%(abuseipdb_apikey)s", abuseipdb_category="18,22"]
[unraid-webgui]
# configuration inherits from jail.d/unraid-webgui.conf
enabled = true
chain = INPUT
port = http,https,YOUR-UNRAID-MY-SERVERS-WAN-PORT
action = %(known/action)s
abuseipdb[abuseipdb_apikey="%(abuseipdb_apikey)s", abuseipdb_category="18,21"]
[unifi-controller-auth]
# configuration inherits from jail.d/unifi-controller-auth.conf
enabled = true
chain = DOCKER-USER
action = %(known/action)s
abuseipdb[abuseipdb_apikey="%(abuseipdb_apikey)s", abuseipdb_category="18,21"]
[vaultwarden-auth]
# configuration inherits from jail.d/vaultwarden-auth.conf
enabled = true
chain = DOCKER-USER
action = %(known/action)s
abuseipdb[abuseipdb_apikey="%(abuseipdb_apikey)s", abuseipdb_category="18,21"]
You can customize additional aspects about a jail by modifying your jail.local file.
[unifi-controller-auth]
# configuration inherits from jail.d/unifi-controller-auth.conf
enabled = true
# If you are using non-standard ports for your unifi-controller, you can specify the ports you use
port = 8081,8442
# If your log file is mounted to a non-standard location inside the container, you can specify the path that the container will see your log file
logpath = /path/to/unificontroller/server.log
# If you are running the unifi-controller on your host (not in a docker container) you can change the chain to INPUT
#chain = INPUT
# If you are running the unifi-controller in a docker container you can change the chain to DOCKER-USER
#chain = DOCKER-USER