basic.yaml

esphome:
  name: lilygo
  platformio_options:
    # Unless noted otherwise, based on https://github.com/Xinyuan-LilyGO/LilyGo-EPD47/blob/1eb6119fc31fcff7a6bafecb09f4225313859fc5/examples/demo/platformio.ini#L37
    upload_speed: 921600
    monitor_speed: 115200
    board_build.mcu: esp32s3
    board_build.f_cpu: 240000000L
    board_build.arduino.memory_type: qspi_opi
    board_build.flash_size: 16MB
    board_build.flash_mode: qio
    board_build.flash_type: qspi
    board_build.psram_type: opi
    board_build.memory_type: qspi_opi
    board_build.boot_freq: 80m
    platform_packages:
      - "toolchain-riscv32-esp @8.4.0+2021r2-patch5"
    build_flags:  # the first three defines are required for the screen library to function.
      - "-DBOARD_HAS_PSRAM"
      - "-DARDUINO_RUNNING_CORE=0"  # TODO: this conflicts with the value from platformio's idedata, spewing a lot of warnings during the build.
      - "-DARDUINO_EVENT_RUNNING_CORE=0"  # and this too
      # In addition to lilygo's settings:
      # To enable reading logs over USB until `hardware_uart: USB_CDC` support
      # is added to `logger:`, as detailed in <https://github.com/esphome/feature-requests/issues/1906>:
      - "-DARDUINO_USB_MODE=1"
      - "-DARDUINO_USB_CDC_ON_BOOT=1"

esp32:
  variant: esp32s3
  board: esp32-s3-devkitc-1

  framework:
    type: arduino
    # Just like in <https://community.home-assistant.io/t/enable-usb-cdc-to-log-hello-world-to-esp32-s3-dev-board-for-esphome/463164/10>
    # I had problems with newer versions; the following combination happens to work, so using it for now.
    version: 2.0.3
    platform_version: 5.1.1

logger:
  level: VERBOSE
  # hardware_uart: USB_CDC  # see note about <https://github.com/esphome/feature-requests/issues/1906> above

# Enable Home Assistant API
api:  # Set up a key instead: https://community.home-assistant.io/t/2023-2-esphome-deprecated-api-password-how-to-update-to-encryption-key
  password: !secret api_ota_password

ota:
  platform: esphome
  password: !secret api_ota_password

wifi: !include wifi-secrets.yaml

binary_sensor:
  - platform: gpio
    pin: 
      number: GPIO21 #was GPIO39 on the previous board
      inverted: true
    name: "Button 1"
    on_press:
      - logger.log: PhysButton Pressed

external_components:
  source:
    type: local
    path: components/
  components: ["t547"]

display:
  - platform: t547
    # rotation: 180
    update_interval: 30s
    lambda: |-
      it.line(0, 0, 960, 540);