Installation failed on raspi 2

[fcacarminati]

Here is the result of the command

$ sudo lsusb; rfkill list all; dkms status; iw dev; iw reg get
Bus 001 Device 004: ID 0bda:8179 Realtek Semiconductor Corp. RTL8188EUS 802.11n Wireless Network Adapter
Bus 001 Device 003: ID 0424:ec00 Microchip Technology, Inc. (formerly SMSC) SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Microchip Technology, Inc. (formerly SMSC) SMC9514 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
rtl88x2bu, 5.13.1: added
global
country GB: DFS-ETSI
(2400 - 2483 @ 40), (N/A, 20), (N/A)
(5150 - 5250 @ 80), (N/A, 23), (N/A), NO-OUTDOOR, AUTO-BW
(5250 - 5350 @ 80), (N/A, 20), (0 ms), NO-OUTDOOR, DFS, AUTO-BW
(5470 - 5730 @ 160), (N/A, 26), (0 ms), DFS
(5725 - 5850 @ 80), (N/A, 23), (N/A), NO-OUTDOOR
(57000 - 71000 @ 2160), (N/A, 40), (N/A)

pi@Pi2:~/88x2bu-20210702 $ uname -a
Linux Pi2 6.6.30-v7+ #1762 SMP Thu May 9 15:15:51 BST 2024 armv7l GNU/Linux

pi@Pi2:~/88x2bu-20210702 $ sudo ./install-driver.sh
: ---------------------------
: install-driver.sh v20240222
: armv7l (kernel architecture)
: arm (architecture to send to gcc)
: 2/4 (in-use/total processing units)
: 890260 (total system memory)
: 6.6.30-v7+ (kernel version)
: gcc (version of gcc used to compile the kernel)
: gcc (Raspbian 10.2.1-6+rpi1) 10.2.1 20210110
: dkms:2.8
: mokutil not installed (Secure Boot status unknown)
: ---------------------------

Checking for previously installed drivers...

---

Deleting module version: 5.8.7.1
completely from the DKMS tree.

Done.
Finished checking for and removing previously installed drivers.
: ---------------------------

Starting installation.
Installing 88x2bu.conf to /etc/modprobe.d
The dkms installation routines are in use.
Copying source files to /usr/src/rtl88x2bu-5.13.1

Creating symlink /var/lib/dkms/rtl88x2bu/5.13.1/source ->
/usr/src/rtl88x2bu-5.13.1

DKMS: add completed.
The driver was added to dkms successfully.
: ---------------------------

Kernel preparation unnecessary for this kernel. Skipping...

Building module:
cleaning build area...
kernelver=6.6.30-v7+ ./dkms-make.sh................................................................................................................................................................................................................................................................................................................................................(bad exit status: 2)
Error! Bad return status for module build on kernel: 6.6.30-v7+ (armv7l)
Consult /var/lib/dkms/rtl88x2bu/5.13.1/build/make.log for more information.
An error occurred. dkms build error: 10
Please report this error.
Please copy all screen output and paste it into the problem report.
Run the following before reattempting installation.
$ sudo ./remove-driver.sh

pi@Pi2:~/88x2bu-20210702 $ tail /var/lib/dkms/rtl88x2bu/5.13.1/build/make.log
CC [M] /var/lib/dkms/rtl88x2bu/5.13.1/build/hal/btc/halbtc8822b1ant.o
CC [M] /var/lib/dkms/rtl88x2bu/5.13.1/build/hal/btc/halbtc8822b2ant.o
CC [M] /var/lib/dkms/rtl88x2bu/5.13.1/build/platform/platform_ops.o
LD [M] /var/lib/dkms/rtl88x2bu/5.13.1/build/88x2bu.o
MODPOST /var/lib/dkms/rtl88x2bu/5.13.1/build/Module.symvers
make[3]: *** No rule to make target '/var/lib/dkms/rtl88x2bu/5.13.1/build/88x2bu.ko', needed by '__modfinal'. Stop.
make[2]: *** [/usr/src/6.6.30-v7+/Makefile:1846: modules] Error 2
make[1]: *** [Makefile:234: __sub-make] Error 2
make[1]: Leaving directory '/usr/src/6.6.30-v7+'
make: *** [Makefile:2527: modules] Error 2

[morrownr]

Hi @fcacarminati

Bus 001 Device 004: ID 0bda:8179 Realtek Semiconductor Corp. RTL8188EUS 802.11n Wireless Network Adapter

So, where is the wifi adapter that uses this driver? That adapter does not use this driver.