[BUG] Invalid config file Section headers have extra information after brackets possible newline issue

[mawoka-myblock]

What happened?

I installed this repo (happy_hare/install_ks.sh -g 8 -c /home/mawoka/.config/KlipperScreen) and started KlipperScreen afterwards getting the following error:

20240901 14:31:46,966 [screen.py:show_error_modal] - Showing error modal: Invalid config file Section headers have extra information after brackets possible newline issue:

enable: {{ (printer.mmu.tool != 0 or (printer.mmu.tool == 0 and printer.mmu.filament != "Loaded")) and printer.mmu.gate_status[0] != 0 and printer.mmu.action == "Idle" }}

What did you expect to happen instead?

Not applicable; expected KlipperScreen to start

How to reproduce this bug?

Difficult one; get the repos, install the Happy Hare edition, don't use the standard systemd management, don't use standard directories

Additional information:

No response

Log output

Logs

```

20240901 14:31:46,810 [functions.py:log_start] - --------------------KlipperScreen Log Start--------------------
20240901 14:31:46,810 [functions.py:log_start] - KlipperScreen Version: v0.4.3-55-7d75d39c-dirty
20240901 14:31:46,810 [functions.py:log_start] - Python version: 3.12
20240901 14:31:46,832 [config.py:get_config_file_location] - Passed config (-c): .
20240901 14:31:46,832 [config.py:init] - Config path location: /home/mawoka/.config/KlipperScreen/KlipperScreen.conf
20240901 14:31:46,833 [config.py:_include_config] - Parsing files: ['/var/home/mawoka/KlipperScreen/config/main_menu.conf']
20240901 14:31:46,835 [config.py:_include_config] - Parsing files: ['/var/home/mawoka/KlipperScreen/config/splash_menu.conf']
20240901 14:31:46,836 [config.py:_include_config] - Parsing files: ['/var/home/mawoka/KlipperScreen/config/print_menu.conf']
20240901 14:31:46,837 [config.py:_include_config] - Parsing files: ['/var/home/mawoka/KlipperScreen/config/move_menu.conf']
20240901 14:31:46,838 [config.py:_include_config] - Parsing files: ['/home/mawoka/.config/KlipperScreen/mmu_klipperscreen.conf']
20240901 14:31:46,841 [config.py:log_config] - ===== Config File =====
[menu __main,__print mmu]
name = {{ gettext('MMU') }}
icon = mmu_carrot
panel = mmu_main
enable = {{ printer.mmu is defined and not klipperscreen.side_mmu_shortcut }}

[menu __main,__print mmu ttg]
name = {{ gettext('Manage TTG...') }}
icon = mmu_ttg_map
panel = mmu_toolmap

[menu __main,__print mmu filaments]
name = {{ gettext('Filaments...') }}
icon = mmu_filaments
panel = mmu_filaments

[menu __main,__print mmu spoolman]
name = {{ gettext('Spoolman...') }}
icon = spoolman
panel = mmu_spoolman
enable = {{ moonraker.spoolman }}
show_disabled = True

[menu __main,__print mmu preload_gates]
name = {{ gettext('Preload Gate...') }}
icon = mmu_reset
enable = {{ printer.idle_timeout.state != "Printing" }}
show_disabled = True
refresh_on = printer.idle_timeout.state

[menu __main,__print mmu preload_gates PG0]
name = {{ gettext('Preload Gate #0') }}
icon = mmu_reset
method = printer.gcode.script
params = { "script":"MMU_PRELOAD GATE=0" }
enable = {{ printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.action

[menu __main,__print mmu preload_gates PG1]
name = {{ gettext('Preload Gate #1') }}
icon = mmu_reset
method = printer.gcode.script
params = { "script":"MMU_PRELOAD GATE=1" }
enable = {{ printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.action

[menu __main,__print mmu preload_gates PG2]
name = {{ gettext('Preload Gate #2') }}
icon = mmu_reset
method = printer.gcode.script
params = { "script":"MMU_PRELOAD GATE=2" }
enable = {{ printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.action

[menu __main,__print mmu preload_gates PG3]
name = {{ gettext('Preload Gate #3') }}
icon = mmu_reset
method = printer.gcode.script
params = { "script":"MMU_PRELOAD GATE=3" }
enable = {{ printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.action

[menu __main,__print mmu preload_gates PG4]
name = {{ gettext('Preload Gate #4') }}
icon = mmu_reset
method = printer.gcode.script
params = { "script":"MMU_PRELOAD GATE=4" }
enable = {{ printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.action

[menu __main,__print mmu preload_gates PG5]
name = {{ gettext('Preload Gate #5') }}
icon = mmu_reset
method = printer.gcode.script
params = { "script":"MMU_PRELOAD GATE=5" }
enable = {{ printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.action

[menu __main,__print mmu preload_gates PG6]
name = {{ gettext('Preload Gate #6') }}
icon = mmu_reset
method = printer.gcode.script
params = { "script":"MMU_PRELOAD GATE=6" }
enable = {{ printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.action

[menu __main,__print mmu preload_gates PG7]
name = {{ gettext('Preload Gate #7') }}
icon = mmu_reset
method = printer.gcode.script
params = { "script":"MMU_PRELOAD GATE=7" }
enable = {{ printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.action

[menu __main,__print mmu check_gates]
name = {{ gettext('Check Gate...') }}
icon = mmu_checkgates
enable = {{ printer.idle_timeout.state != "Printing" }}
show_disabled = True
refresh_on = printer.idle_timeout.state

[menu __main,__print mmu check_gates CG0]
name = {{ gettext('Check Gate #0') }}
icon = mmu_checkgate0
method = printer.gcode.script
params = { "script":"MMU_CHECK_GATE GATE=0 QUIET=1" }
enable = {{ printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.action

[menu __main,__print mmu check_gates CG1]
name = {{ gettext('Check Gate #1') }}
icon = mmu_checkgate1
method = printer.gcode.script
params = { "script":"MMU_CHECK_GATE GATE=1 QUIET=1" }
enable = {{ printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.action

[menu __main,__print mmu check_gates CG2]
name = {{ gettext('Check Gate #2') }}
icon = mmu_checkgate2
method = printer.gcode.script
params = { "script":"MMU_CHECK_GATE GATE=2 QUIET=1" }
enable = {{ printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.action

[menu __main,__print mmu check_gates CG3]
name = {{ gettext('Check Gate #3') }}
icon = mmu_checkgate3
method = printer.gcode.script
params = { "script":"MMU_CHECK_GATE GATE=3 QUIET=1" }
enable = {{ printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.action

[menu __main,__print mmu check_gates CG4]
name = {{ gettext('Check Gate #4') }}
icon = mmu_checkgate4
method = printer.gcode.script
params = { "script":"MMU_CHECK_GATE GATE=4 QUIET=1" }
enable = {{ printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.action

[menu __main,__print mmu check_gates CG5]
name = {{ gettext('Check Gate #5') }}
icon = mmu_checkgate5
method = printer.gcode.script
params = { "script":"MMU_CHECK_GATE GATE=5 QUIET=1" }
enable = {{ printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.action

[menu __main,__print mmu check_gates CG6]
name = {{ gettext('Check Gate #6') }}
icon = mmu_checkgate6
method = printer.gcode.script
params = { "script":"MMU_CHECK_GATE GATE=6 QUIET=1" }
enable = {{ printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.action

[menu __main,__print mmu check_gates CG7]
name = {{ gettext('Check Gate #7') }}
icon = mmu_checkgate7
method = printer.gcode.script
params = { "script":"MMU_CHECK_GATE GATE=7 QUIET=1" }
enable = {{ printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.action

[menu __main,__print mmu tools]
name = {{ gettext('Load Tool...') }}
icon = extruder
enable = {{ printer.idle_timeout.state != "Printing" }}
show_disabled = True
refresh_on = printer.idle_timeout.state

[menu __main,__print mmu tools T0]
name = {{ gettext('T0') }}
icon = mmu_t0
method = printer.gcode.script
params = { "script":"MMU_CHANGE_TOOL TOOL=0 QUIET=1" }
enable = {{ (printer.mmu.tool != 0 or (printer.mmu.tool == 0 and printer.mmu.filament != "Loaded")) and printer.mmu.gate_status[0] != 0 and printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.tool, printer.mmu.gate_status, printer.mmu.filament, printer.mmu.action

[menu __main,__print mmu tools T1]
name = {{ gettext('T1') }}
icon = mmu_t1
method = printer.gcode.script
params = { "script":"MMU_CHANGE_TOOL TOOL=1 QUIET=1" }
enable = {{ (printer.mmu.tool != 1 or (printer.mmu.tool == 1 and printer.mmu.filament != "Loaded")) and printer.mmu.gate_status[1] != 0 and printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.tool, printer.mmu.gate_status, printer.mmu.filament, printer.mmu.action

[menu __main,__print mmu tools T2]
name = {{ gettext('T2') }}
icon = mmu_t2
method = printer.gcode.script
params = { "script":"MMU_CHANGE_TOOL TOOL=2 QUIET=1" }
enable = {{ (printer.mmu.tool != 2 or (printer.mmu.tool == 2 and printer.mmu.filament != "Loaded")) and printer.mmu.gate_status[2] != 0 and printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.tool, printer.mmu.gate_status, printer.mmu.filament, printer.mmu.action

[menu __main,__print mmu tools T3]
name = {{ gettext('T3') }}
icon = mmu_t3
method = printer.gcode.script
params = { "script":"MMU_CHANGE_TOOL TOOL=3 QUIET=1" }
enable = {{ (printer.mmu.tool != 3 or (printer.mmu.tool == 3 and printer.mmu.filament != "Loaded")) and printer.mmu.gate_status[3] != 0 and printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.tool, printer.mmu.gate_status, printer.mmu.filament, printer.mmu.action

[menu __main,__print mmu tools T4]
name = {{ gettext('T4') }}
icon = mmu_t4
method = printer.gcode.script
params = { "script":"MMU_CHANGE_TOOL TOOL=4 QUIET=1" }
enable = {{ (printer.mmu.tool != 4 or (printer.mmu.tool == 4 and printer.mmu.filament != "Loaded")) and printer.mmu.gate_status[4] != 0 and printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.tool, printer.mmu.gate_status, printer.mmu.filament, printer.mmu.action

[menu __main,__print mmu tools T5]
name = {{ gettext('T5') }}
icon = mmu_t5
method = printer.gcode.script
params = { "script":"MMU_CHANGE_TOOL TOOL=5 QUIET=1" }
enable = {{ (printer.mmu.tool != 5 or (printer.mmu.tool == 5 and printer.mmu.filament != "Loaded")) and printer.mmu.gate_status[5] != 0 and printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.tool, printer.mmu.gate_status, printer.mmu.filament, printer.mmu.action

[menu __main,__print mmu tools T6]
name = {{ gettext('T6') }}
icon = mmu_t6
method = printer.gcode.script
params = { "script":"MMU_CHANGE_TOOL TOOL=6 QUIET=1" }
enable = {{ (printer.mmu.tool != 6 or (printer.mmu.tool == 6 and printer.mmu.filament != "Loaded")) and printer.mmu.gate_status[6] != 0 and printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.tool, printer.mmu.gate_status, printer.mmu.filament, printer.mmu.action

[menu __main,__print mmu tools T7]
name = {{ gettext('T7') }}
icon = mmu_t7
method = printer.gcode.script
params = { "script":"MMU_CHANGE_TOOL TOOL=7 QUIET=1" }
enable = {{ (printer.mmu.tool != 7 or (printer.mmu.tool == 7 and printer.mmu.filament != "Loaded")) and printer.mmu.gate_status[7] != 0 and printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.tool, printer.mmu.gate_status, printer.mmu.filament, printer.mmu.action

[menu __main,__print mmu select_gates]
name = {{ gettext('Select Gate...') }}
icon = mmu_select_gate
enable = {{ printer.idle_timeout.state != "Printing" }}
show_disabled = True
refresh_on = printer.idle_timeout.state

[menu __main,__print mmu select_gates bypass}]
name = {{ gettext('Select Bypass') }}
icon = mmu_select_bypass
method = printer.gcode.script
params = {"script":"MMU_SELECT_BYPASS"}
enable = {{ printer.mmu.gate != -2 and printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.gate, printer.mmu.action

[menu __main,__print mmu select_gates G0]
name = {{ gettext('Select Gate #0') }}
icon = mmu_select_gate
method = printer.gcode.script
params = { "script":"MMU_SELECT GATE=0" }
enable = {{ printer.mmu.gate != 0 and printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.gate, printer.mmu.action

[menu __main,__print mmu select_gates G1]
name = {{ gettext('Select Gate #1') }}
icon = mmu_select_gate
method = printer.gcode.script
params = { "script":"MMU_SELECT GATE=1" }
enable = {{ printer.mmu.gate != 1 and printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.gate, printer.mmu.action

[menu __main,__print mmu select_gates G2]
name = {{ gettext('Select Gate #2') }}
icon = mmu_select_gate
method = printer.gcode.script
params = { "script":"MMU_SELECT GATE=2" }
enable = {{ printer.mmu.gate != 2 and printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.gate, printer.mmu.action

[menu __main,__print mmu select_gates G3]
name = {{ gettext('Select Gate #3') }}
icon = mmu_select_gate
method = printer.gcode.script
params = { "script":"MMU_SELECT GATE=3" }
enable = {{ printer.mmu.gate != 3 and printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.gate, printer.mmu.action

[menu __main,__print mmu select_gates G4]
name = {{ gettext('Select Gate #4') }}
icon = mmu_select_gate
method = printer.gcode.script
params = { "script":"MMU_SELECT GATE=4" }
enable = {{ printer.mmu.gate != 4 and printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.gate, printer.mmu.action

[menu __main,__print mmu select_gates G5]
name = {{ gettext('Select Gate #5') }}
icon = mmu_select_gate
method = printer.gcode.script
params = { "script":"MMU_SELECT GATE=5" }
enable = {{ printer.mmu.gate != 5 and printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.gate, printer.mmu.action

[menu __main,__print mmu select_gates G6]
name = {{ gettext('Select Gate #6') }}
icon = mmu_select_gate
method = printer.gcode.script
params = { "script":"MMU_SELECT GATE=6" }
enable = {{ printer.mmu.gate != 6 and printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.gate, printer.mmu.action

[menu __main,__print mmu select_gates G7]
name = {{ gettext('Select Gate #7') }}
icon = mmu_select_gate
method = printer.gcode.script
params = { "script":"MMU_SELECT GATE=7" }
enable = {{ printer.mmu.gate != 7 and printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.gate, printer.mmu.action

[menu __main,__print mmu status]
name = {{ gettext('Display Status') }}
icon = info
method = printer.gcode.script
params = {"script":"MMU_STATUS"}
enable = {{ printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.action

[menu __main,__print mmu print]
name = {{ gettext('Print Stats') }}
icon = mmu_status
method = printer.gcode.script
params = {"script":"MMU_STATS"}
enable = {{ printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.action

[menu __main,__print mmu reset]
name = {{ gettext('Reset Stats') }}
icon = mmu_stats_reset
method = printer.gcode.script
confirm = Are you sure you want to reset MMU statistics?
params = {"script":"MMU_STATS RESET=1"}
enable = {{ printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.action

[menu __main,__print mmu enable_endless_spool]
name = {{ gettext('Enable E.Spool') }}
icon = mmu_enable_endless_spool
method = printer.gcode.script
params = {"script":"MMU_ENDLESS_SPOOL ENABLE=1"}
enable = {{ printer.mmu.endless_spool == 0 }}
show_disabled = True
refresh_on = printer.mmu.endless_spool

[menu __main,__print mmu disable_endless_spool]
name = {{ gettext('Disable E.Spool') }}
icon = mmu_disable_endless_spool
method = printer.gcode.script
params = {"script":"MMU_ENDLESS_SPOOL ENABLE=0"}
enable = {{ printer.mmu.endless_spool == 1 }}
show_disabled = True
refresh_on = printer.mmu.endless_spool

[menu __main,__print mmu led_disable]
name = {{ gettext('Disable LED') }}
icon = mmu_led_disable
method = printer.gcode.script
params = {"script":"MMU_LED ENABLE=0 QUIET=1"}
enable = {{ printer.mmu.enabled == 1 and not printer.mmu.print_state == "standby" }}
show_disabled = True
refresh_on = printer.mmu.enabled, printer.mmu.print_state

[menu __main,__print mmu led_gate_status]
name = {{ gettext('LED Gate Status') }}
icon = mmu_led_gate_status
method = printer.gcode.script
params = {"script":"MMU_LED ENABLE=1 EXIT_EFFECT=gate_status QUIET=1"}
enable = {{ printer.mmu.enabled == 1 and not printer.mmu.print_state == "standby" }}
show_disabled = True
refresh_on = printer.mmu.enabled, printer.mmu.print_state

[menu __main,__print mmu led_filament_color]
name = {{ gettext('LED Fil. Color') }}
icon = mmu_led_filament_color
method = printer.gcode.script
params = {"script":"MMU_LED ENABLE=1 EXIT_EFFECT=filament_color QUIET=1"}
enable = {{ printer.mmu.enabled == 1 and not printer.mmu.print_state == "standby" }}
show_disabled = True
refresh_on = printer.mmu.enabled, printer.mmu.print_state

[menu __main,__print mmu spare1]
name = {{ gettext('user def') }}
icon = mmu_carrot
enable = False
show_disabled = False

[menu __main more mmu_calib]
name = {{ gettext('MMU Setup') }}
icon = mmu_gear
enable = {{ printer.mmu is defined }}

[menu __main more mmu_calib home]
name = {{ gettext('Home') }}
icon = home
method = printer.gcode.script
params = {"script":"MMU_HOME"}

[menu __main more mmu_calib select_gates]
name = {{ gettext('Select Gate...') }}
icon = mmu_select_gate

[menu __main more mmu_calib select_gates G0]
name = {{ gettext('Select Gate #0') }}
icon = mmu_select_gate
method = printer.gcode.script
params = { "script":"MMU_SELECT GATE=0" }
enable = {{ printer.mmu.gate != 0 and printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.gate, printer.mmu.action

[menu __main more mmu_calib select_gates G1]
name = {{ gettext('Select Gate #1') }}
icon = mmu_select_gate
method = printer.gcode.script
params = { "script":"MMU_SELECT GATE=1" }
enable = {{ printer.mmu.gate != 1 and printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.gate, printer.mmu.action

[menu __main more mmu_calib select_gates G2]
name = {{ gettext('Select Gate #2') }}
icon = mmu_select_gate
method = printer.gcode.script
params = { "script":"MMU_SELECT GATE=2" }
enable = {{ printer.mmu.gate != 2 and printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.gate, printer.mmu.action

[menu __main more mmu_calib select_gates G3]
name = {{ gettext('Select Gate #3') }}
icon = mmu_select_gate
method = printer.gcode.script
params = { "script":"MMU_SELECT GATE=3" }
enable = {{ printer.mmu.gate != 3 and printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.gate, printer.mmu.action

[menu __main more mmu_calib select_gates G4]
name = {{ gettext('Select Gate #4') }}
icon = mmu_select_gate
method = printer.gcode.script
params = { "script":"MMU_SELECT GATE=4" }
enable = {{ printer.mmu.gate != 4 and printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.gate, printer.mmu.action

[menu __main more mmu_calib select_gates G5]
name = {{ gettext('Select Gate #5') }}
icon = mmu_select_gate
method = printer.gcode.script
params = { "script":"MMU_SELECT GATE=5" }
enable = {{ printer.mmu.gate != 5 and printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.gate, printer.mmu.action

[menu __main more mmu_calib select_gates G6]
name = {{ gettext('Select Gate #6') }}
icon = mmu_select_gate
method = printer.gcode.script
params = { "script":"MMU_SELECT GATE=6" }
enable = {{ printer.mmu.gate != 6 and printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.gate, printer.mmu.action

[menu __main more mmu_calib select_gates G7]
name = {{ gettext('Select Gate #7') }}
icon = mmu_select_gate
method = printer.gcode.script
params = { "script":"MMU_SELECT GATE=7" }
enable = {{ printer.mmu.gate != 7 and printer.mmu.action == "Idle" }}
show_disabled = True
refresh_on = printer.mmu.gate, printer.mmu.action

[menu __main more mmu_calib grip]
name = {{ gettext('Test Grip') }}
icon = mmu_grip
method = printer.gcode.script
params = {"script":"MMU_TEST_GRIP"}

[menu __main more mmu_calib formtip]
name = {{ gettext('Form Tip') }}
icon = mmu_formtip
method = printer.gcode.script
params = {"script":"MMU_FORM_TIP"}

[menu __main more mmu_calib servoup]
name = {{ gettext('Servo UP') }}
icon = arrow-up
method = printer.gcode.script
params = {"script":"MMU_SERVO POS=up"}
enable = {{ printer.mmu.servo != "Up" }}
show_disabled = True
refresh_on = printer.mmu.servo

[menu __main more mmu_calib servomove]
name = {{ gettext('Servo MOVE') }}
icon = arrow-right
method = printer.gcode.script
params = {"script":"MMU_SERVO POS=move"}
enable = {{ printer.mmu.servo != "Move" }}
show_disabled = True
refresh_on = printer.mmu.servo

[menu __main more mmu_calib servodown]
name = {{ gettext('Servo DOWN') }}
icon = arrow-down
method = printer.gcode.script
params = {"script":"MMU_SERVO POS=down"}
enable = {{ printer.mmu.servo != "Down" }}
show_disabled = True
refresh_on = printer.mmu.servo

[menu __main more mmu_calib encoder]
name = {{ gettext('Cal. Encoder') }}
icon = mmu_encodercal
method = printer.gcode.script
params = {"script":"MMU_CALIBRATE_ENCODER"}

[menu __main more mmu_calib all]
name = {{ gettext('Calibrate ALL') }}
icon = extruder
method = printer.gcode.script
confirm = This will calibrate all gates. Are you sure?
params = {"script":"MMU_CALIBRATE_GATES ALL=1"}

[menu __main more mmu_calib gate]
name = {{ gettext('Cal. Gate...') }}
icon = mmu_calibrate

[menu __main more mmu_calib gate CG0]
name = {{ gettext('Calibrate #0') }}
icon = mmu_calibrate
method = printer.gcode.script
params = { "script":"MMU_CALIBRATE_GATES GATE=0" }

[menu __main more mmu_calib gate CG1]
name = {{ gettext('Calibrate #1') }}
icon = mmu_calibrate
method = printer.gcode.script
params = { "script":"MMU_CALIBRATE_GATES GATE=1" }

[menu __main more mmu_calib gate CG2]
name = {{ gettext('Calibrate #2') }}
icon = mmu_calibrate
method = printer.gcode.script
params = { "script":"MMU_CALIBRATE_GATES GATE=2" }

[menu __main more mmu_calib gate CG3]
name = {{ gettext('Calibrate #3') }}
icon = mmu_calibrate
method = printer.gcode.script
params = { "script":"MMU_CALIBRATE_GATES GATE=3" }

[menu __main more mmu_calib gate CG4]
name = {{ gettext('Calibrate #4') }}
icon = mmu_calibrate
method = printer.gcode.script
params = { "script":"MMU_CALIBRATE_GATES GATE=4" }

[menu __main more mmu_calib gate CG5]
name = {{ gettext('Calibrate #5') }}
icon = mmu_calibrate
method = printer.gcode.script
params = { "script":"MMU_CALIBRATE_GATES GATE=5" }

[menu __main more mmu_calib gate CG6]
name = {{ gettext('Calibrate #6') }}
icon = mmu_calibrate
method = printer.gcode.script
params = { "script":"MMU_CALIBRATE_GATES GATE=6" }

[menu __main more mmu_calib gate CG7]
name = {{ gettext('Calibrate #7') }}
icon = mmu_calibrate
method = printer.gcode.script
params = { "script":"MMU_CALIBRATE_GATES GATE=7" }

20240901 14:31:46,841 [config.py:validate_config] - enable: {{ (printer.mmu.tool != 0 or (printer.mmu.tool == 0 and printer.mmu.filament != "Loaded")) and printer.mmu.gate_status[0] != 0 and printer.mmu.action == "Idle" }}
20240901 14:31:46,841 [config.py:log_config] - ===== Config File =====
[include mmu_klipperscreen.conf]

[printer Neptune4]
moonraker_host = 192.168.111.192
moonraker_port = 7125

[printer Genius]
moonraker_host = agenius.local
moonraker_port = 7125

20240901 14:31:46,842 [config.py:init] - ====== Saved Def ======

[main]
print_estimate_method = slicer
screen_blanking = off
screen_blanking_printing = off
confirm_estop = True
use_dpms = False
print_sort_dir = date_desc
print_view = list

[spoolman]
hide_archived = False

=======================
20240901 14:31:46,842 [config.py:init] - Configured printers: [
{
"Neptune4": {
"moonraker_host": "192.168.111.192",
"moonraker_port": "7125",
"moonraker_api_key": ""
}
},
{
"Genius": {
"moonraker_host": "agenius.local",
"moonraker_port": "7125",
"moonraker_api_key": ""
}
}
]
20240901 14:31:46,871 [config.py:create_translations] - Selected lang: system_lang OS lang: en_US
20240901 14:31:46,871 [config.py:install_language] - Using lang en
20240901 14:31:46,883 [screen.py:init] - Monitors: 2 using number: 0
20240901 14:31:46,883 [screen.py:init] - Wayland: True Display name: wayland-0
20240901 14:31:46,883 [screen.py:init] - Running inside a desktop environment is not recommended
20240901 14:31:46,883 [screen.py:init] - Setting windowed mode
20240901 14:31:46,884 [screen.py:init] - Screen resolution: 480x320
20240901 14:31:46,927 [KlippyGtk.py:init] - Font size: 11.9 (medium)
20240901 14:31:46,966 [screen.py:show_error_modal] - Showing error modal: Invalid config file Section headers have extra information after brackets possible newline issue:

enable: {{ (printer.mmu.tool != 0 or (printer.mmu.tool == 0 and printer.mmu.filament != "Loaded")) and printer.mmu.gate_status[0] != 0 and printer.mmu.action == "Idle" }}

20240901 14:31:46,992 [KlippyGtk.py:Dialog] - Showing dialog Error (width=480, height=320)
20240901 14:31:46,997 [screen.py:update_size] - Size changed: 1680x1050

</details>

[moggieuk]

This isn't running the HH edition. I'm sure of that because that is a bug in the upstream KS that I fixed.
Try this one more time:

cd ~/KlipperScreen
git pull
./happy_hare/install_ks.sh -g <num_gates>

Also make sure there are no errors and that you are pulling from my repo...

[mawoka-myblock]

I just did, still the same error

[moggieuk]

I'm not sure what has happened but I know that error cannot occur with the Happy Hare edition because I removed it.

[mawoka-myblock]

I've done another git pull in both folders, nothing changed

[pvilbig]

Same issue here