KNX DPT 3.007 Dimming Control not send on Bus

[Sven5651]

Hey,
Above all, I congratulate you for your job.

I started with Smarthome and Smartvisu, and I have problems to send a DPT 3.007 Dimming Control (4 bits).

With SmartVisu, i use the Widget "basic.button". These are configured in an HTML page.
Here is the code of my html page (roomsalleamanger.html) in the folder
"/var/www/smartvisu/pages/myhome" :

If I dont make mistakes, the logic table for Dimming Control is:

With:
For DIM INCREASE
bControl = 1
byRange.2 = 0
byRange.1 = 1
byRange.0 = 0
--> 9 dec.

For DIM DECREASE
bControl = 0
byRange.2 = 0
byRange.1 = 0
byRange.0 = 1
--> 1 dec.

For DIM STOP
bControl = 0
byRange.2 = 0
byRange.1 = 0
byRange.0 = 0
--> 0 dec.

My file ‘items’ (test.conf) in the folder « /usr/smarthome/items/» is configured as follow:

and the message in the smarthome.log file is:

I also tested with a logics file (test_dimmer.py) and the function:
sh.knx.groupwrite('0/0/2', 9, '3') but it does not work.

the message in the smarthome.log file is:

Thank you for the help you can give me.
Best regard.

[mknx]

Hi Sven,

see https://github.com/mknx/smarthome/tree/develop/plugins/knx for an updated table. Currently you have to use a list e.g. [0, 1]

hth

Marcus

[Sven5651]

Hi Marcus,

Thank you for your reply.

I use a list on my widget "basic.button"?
Exemple:

{{ basic.button('buton1', 'EG.salleamanger.dimmer', 'UP', '', '[1,2]', 'mini') }}

and with

[[[dimmer]]]
visu = yes
type = list
knx_dpt = 3
knx_send = 0/0/2

With this configuration, the message in the smarthome.log file is:
Item 'EG.salleamanger.dimmer': value ([1,2]) does not match type (list)

-------- Message d'origine--------
De: Marcus [mailto:[email protected]]
Date: mer. 23/10/2013 22:26
À: mknx/smarthome
Cc: DERBEQUE Steve
Objet : Re: [smarthome] KNX DPT 3.007 Dimming Control not send on Bus (#33)

Hi Sven,

see https://github.com/mknx/smarthome/tree/develop/plugins/knx for an updated table. Currently you have to use a list e.g. [0, 1]

hth

Marcus

---

Reply to this email directly or view it on GitHub:
#33 (comment)