milvus_cluster_default.yaml is empty issue

[hxlsky]

i want to install milvus in k8s,but i get the milvus_cluster_default.yaml ,and this file has no detail config

is there a default config file contain detal config ?

[yhmo]

The doc also mentioned: "The command above deploys a Milvus cluster with its components and dependencies in separate pods using default configurations. To customize these settings, we recommend you use the Milvus Sizing Tool to adjust the configurations based on your actual data size and then download the corresponding YAML file."

Use the sizing tool to generate a yaml file: https://milvus.io/tools/sizing. Click the button on the right-bottom corner.

[yhmo]

Wait @JackLCL to contact you.

[yhmo]

The required images are specified by this file: https://github.com/zilliztech/milvus-operator/blob/f307f4b703e20ad7b59572a560799fa419b9bb74/Makefile#L235

[hxlsky]

and how to modify the milvus configure yaml file(milvus_cluster_default.yaml)?

[yhmo]

Did you download a yaml file from the sizing tool?

I just downloaded one, you can see the sizing tool already set the configurations for you:

apiVersion: milvus.io/v1beta1
kind: Milvus
metadata:
  name: my-release
  labels:
    app: milvus
spec:
  components:
    mixCoord:
      replicas: 1
      resources:
        limits:
          cpu: 1
          memory: 4Gi
    indexNode:
      replicas: 1
      resources:
        limits:
          cpu: 4
          memory: 8Gi
    proxy:
      replicas: 1
      resources:
        limits:
          cpu: 1
          memory: 4Gi
  config: {}
  dependencies:
    etcd:
      inCluster:
        values:
          autoCompactionMode: revision
          autoCompactionRetention: "1000"
          extraEnvVars:
          - name: ETCD_QUOTA_BACKEND_BYTES
            value: "4294967296"
          - name: ETCD_HEARTBEAT_INTERVAL
            value: "500"
          - name: ETCD_ELECTION_TIMEOUT
            value: "25000"
          - name: ETCD_SNAPSHOT_COUNT
            value: "10000"
          - name: ETCD_ENABLE_PPROF
            value: "true"
          persistence:
            accessMode: ReadWriteOnce
            enabled: true
            size: 30Gi   #SSD Required
            storageClass:
          replicaCount: 3
          resources:
            limits:
              cpu: 1
              memory: 2Gi
            requests:
              cpu: 1
              memory: 2Gi
    
    pulsar:
      inCluster:
        values:
          proxy:
            replicaCount: 2
            configData:
              PULSAR_MEM: >
                -Xms1024M
                -Xmx1024M
                -XX:MaxDirectMemorySize=1024M
              httpNumThreads: "100"
          zookeeper:
            volumes:
              persistence: true
              data:
                name: data
                size: 20Gi   #SSD Required
                storageClassName:
            resources:
              requests:
                memory: 1Gi
                cpu: 1
            configData:
              PULSAR_MEM: >
                -Xms512M
                -Xmx512M
          bookkeeper:
            volumes:
              journal:
                name: journal
                size: 10Gi
                storageClassName:
              ledgers:
                name: ledgers
                size: 30Gi   #SSD Required
                storageClassName:
            resources:
              requests:
                memory: 8Gi
                cpu: 1
            configData:
              PULSAR_MEM: >
                -Xms2048M
                -Xmx2048M
                -XX:MaxDirectMemorySize=4096M
          broker:
            component: broker
            podMonitor:
              enabled: false
            replicaCount: 2
            resources:
              requests:
                memory: 9Gi
                cpu: 2
            configData:
              PULSAR_MEM: >
                -Xms2048M
                -Xmx2048M
                -XX:MaxDirectMemorySize=4096M
  
    storage:
      inCluster:
        values:
          mode: distributed
          resources:
            limits: 
              cpu: 1
              memory: 2Gi
          persistence:
            storageClass:
            accessMode: ReadWriteOnce
            size: 10Gi

  

[hxlsky]

how can i setting the images?

[hxlsky]

and my milvus-operator is installed success

[hxlsky]

all is pending status,how can i do?

[hxlsky]

it can not docker pull the images in my machine, is it the reason lead to the pending status ?