Optimal interpolation

Optimal interpolation (OI) can be used to create gridded analysis by combining a gridded background field (e.g. from an NWP model) with observations at points. OI weights the background and the observations based on the uncertainty of each data source.

Gridpp's OI method does not perform any quality control (QC) on the observations. Check out Titanlib, which contains suitable QC functions for this purpose. For a complete step-by-step guide on creating gridded analysis, checkout https://tnipen.github.io/2020/06/15/titanlib-gridpp.html.

The OI function signature looks like this:

gridpp.optimal_interpolation(bgrid, background, points, pobs, pratios,
   pbackground, structure, max_points) 

where bgrid is the background grid, background is the 2D background field, points is the locations of the observations, pobs is a vector of observations, pratios is ratio of observation error variance to background error variance, pbackground is the background interpolated to the observation points, structure is a structure function object, and max_points specifies the maximum number of observations to use for a gridpoint.

Structure function

The structure function specifies how analysis increments are spread spatially. Gridpp supports several structure functions, but typically a gaussian function is used (Barnes 1973):

structure = gridpp.BarnesStructure(100000, 200)

The first argument is the horizontal decorrelation length scale (in meters) and the second is the vertical decorrelation length scale (in meters). Optionally, a third argument specifying the decorrelation length across land area fraction (units 1), and a fourth argumnet specifying the maximum length that an observations will have an effect (in meters, also called the localization radius). If the third is unspecified, land area fractions are ignored in the structure function., If the fourth is unspecified, 3.64 times the horizontal scale is used.

A Cressman structure function is also available, where correlations decrease linearly to 0 at the length scales:

structure = gridpp.CressmanStructure(100000, 200)

Observation operator

Applying the observation operator to the background field results in a vector of values at the observation points. There are several methods to do this, but a typical one is nearest neighbour.

pbackground = gridpp.nearest(bgrid, points, background)

Any of gridpp's downscalers can be used for this, or the users can compute the values using their own preferred method.

Error variances

OI only requires the ratio of the error variance of the observations and background. Since observations are more trustworth than the background, values less than 1 are typically used. The error variance ratios are passed in as vectors, meaning that different observations can be assigned diferent ratios.

Maximum locations

The computation time for OI is dependent on how many observations are available within the localization radius. If the domain has areas with very high density of stations, the calculations in this region can dominate the total computation time. max_points limits the number of observations that can be used for any particular gridpoint. If more observations are available, only the max_points stations with the highest correlation are used.

Example

pbackground = gridpp.bilinear(grid, points, temp_analysis)
pratios = np.full(points.size(), 0.1)
h = 100000
v = 200
structure = gridpp.BarnesStructure(h, v)
max_points = 50
analysis = gridpp.optimal_interpolation(igrid, temp_analysis, points,
        temp_obs, pratios, pbackground, structure, max_points)

Ensemble mode

Gridpp also supports an Ensemble-based Statistical Interpolation (EnSI; Lussana et al. 2019) scheme that uses spatial structure information from an ensemble of NWP model runs.