| title |
|---|
Embiggen |
upscale your images on limited memory machines
GFPGAN and Real-ESRGAN are both memory intensive. In order to avoid crashes and memory overloads during the Stable Diffusion process, these effects are applied after Stable Diffusion has completed its work.
In single image generations, you will see the output right away but when you are using multiple iterations, the images will first be generated and then upscaled and face restored after that process is complete. While the image generation is taking place, you will still be able to preview the base images.
If you wish to stop during the image generation but want to upscale or
face restore a particular generated image, pass it again with the same
prompt and generated seed along with the -U and -G prompt
arguments to perform those actions.
If you wanted to be able to do more (pixels) without running out of VRAM, or you want to upscale with details that couldn't possibly appear without the context of a prompt, this is the feature to try out.
Embiggen automates the process of taking an init image, upscaling it, cutting it into smaller tiles that slightly overlap, running all the tiles through img2img to refine details with respect to the prompt, and "stitching" the tiles back together into a cohesive image.
It automatically computes how many tiles are needed, and so it can be fed ANY size init image and perform Img2Img on it (though it will be run only one tile at a time, which can cause problems, see the Note at the end).
If you're familiar with "GoBig" (ala progrock-stable) it's similar to that, except it can work up to an arbitrarily large size (instead of just 2x), with tile overlaps configurable as a ratio, and has extra logic to re-run any number of the tile sub-sections of the image if for example a small part of a huge run got messed up.
-embiggen <scaling_factor> <esrgan_strength> <overlap_ratio OR overlap_pixels>
Takes a scaling factor relative to the size of the --init_img (-I), followed by
ESRGAN upscaling strength (0 - 1.0), followed by minimum amount of overlap
between tiles as a decimal ratio (0 - 1.0) OR a number of pixels.
The scaling factor is how much larger than the --init_img the output
should be, and will multiply both x and y axis, so an image that is a
scaling factor of 3.0 has 3*3= 9 times as many pixels, and will take
(at least) 9 times as long (see overlap for why it might be
longer). If the --init_img is already the right size -embiggen 1,
and it can also be less than one if the init_img is too big.
Esrgan_strength defaults to 0.75, and the overlap_ratio defaults to 0.25, both are optional.
Unlike Img2Img, the --width (-W) and --height (-H) arguments
do not control the size of the image as a whole, but the size of the
tiles used to Embiggen the image.
ESRGAN is used to upscale the --init_img prior to cutting it into
tiles/pieces to run through img2img and then stitch back
together. Embiggen can be run without ESRGAN; just set the strength to
zero (e.g. -embiggen 1.75 0). The output of Embiggen can also be
upscaled after it's finished (-U).
The overlap is the minimum that tiles will overlap with adjacent tiles, specified as either a ratio or a number of pixels. How much the tiles overlap determines the likelihood the tiling will be noticable, really small overlaps (e.g. a couple of pixels) may produce noticeable grid-like fuzzy distortions in the final stitched image. Though, as the overlapping space doesn't contribute to making the image bigger, and the larger the overlap the more tiles (and the more time) it will take to finish.
Because the overlapping parts of tiles don't "contribute" to
increasing size, every tile after the first in a row or column
effectively only covers an extra 1 - overlap_ratio on each axis. If
the input/--init_img is same size as a tile, the ideal (for time)
scaling factors with the default overlap (0.25) are 1.75, 2.5, 3.25,
4.0, etc.
-embiggen_tiles <spaced list of tiles>
An advanced usage useful if you only want to alter parts of the image
while running Embiggen. It takes a list of tiles by number to run and
replace onto the initial image e.g. 1 3 5. It's useful for either
fixing problem spots from a previous Embiggen run, or selectively
altering the prompt for sections of an image - for creative or
coherency reasons.
Tiles are numbered starting with one, and left-to-right,
top-to-bottom. So, if you are generating a 3x3 tiled image, the
middle row would be 4 5 6.
-embiggen_strength <strength>
Another advanced option if you want to experiment with the strength parameter that embiggen uses when it calls Img2Img. Values range from 0.0 to 1.0 and lower values preserve more of the character of the initial image. Values that are too high will result in a completely different end image, while values that are too low will result in an image not dissimilar to one you would get with ESRGAN upscaling alone. The default value is 0.4.
!!! example ""
Running Embiggen with 512x512 tiles on an existing image, scaling up by a factor of 2.5x;
and doing the same again (default ESRGAN strength is 0.75, default overlap between tiles is 0.25):
```bash
invoke > a photo of a forest at sunset -s 100 -W 512 -H 512 -I outputs/forest.png -f 0.4 -embiggen 2.5
invoke > a photo of a forest at sunset -s 100 -W 512 -H 512 -I outputs/forest.png -f 0.4 -embiggen 2.5 0.75 0.25
```
If your starting image was also 512x512 this should have taken 9 tiles.
!!! example ""
If there weren't enough clouds in the sky of that forest you just made
(and that image is about 1280 pixels (512*2.5) wide A.K.A. three
512x512 tiles with 0.25 overlaps wide) we can replace that top row of
tiles:
```bash
invoke> a photo of puffy clouds over a forest at sunset -s 100 -W 512 -H 512 -I outputs/000002.seed.png -f 0.5 -embiggen_tiles 1 2 3
```
It is easy to apply embiggen to any previously-generated file without having to
look up the original prompt and provide an initial image. Just use the
syntax !fix path/to/file.png <embiggen>. For example, you can rewrite the
previous command to look like this:
invoke> !fix ./outputs/000002.seed.png -embiggen_tiles 1 2 3A new file named 000002.seed.fixed.png will be created in the output directory. Note that
the !fix command does not replace the original file, unlike the behavior at generate time.
You do not need to provide the prompt, and !fix automatically selects a good strength for
embiggen-ing.
!!! note
Because the same prompt is used on all the tiled images, and the model
doesn't have the context of anything outside the tile being run - it
can end up creating repeated pattern (also called 'motifs') across all
the tiles based on that prompt. The best way to combat this is
lowering the `--strength` (`-f`) to stay more true to the init image,
and increasing the number of steps so there is more compute-time to
create the detail. Anecdotally `--strength` 0.35-0.45 works pretty
well on most things. It may also work great in some examples even with
the `--strength` set high for patterns, landscapes, or subjects that
are more abstract. Because this is (relatively) fast, you can also
preserve the best parts from each.
Author: Travco