diff --git a/platformio.ini b/platformio.ini
index d2f1814..aaf9a6f 100644
--- a/platformio.ini
+++ b/platformio.ini
@@ -22,7 +22,7 @@ framework = arduino
 board_build.partitions = partitions.csv
 
 build_flags               =  ${usersettings.build_flags}
-                             -DCORE_DEBUG_LEVEL=5
+                             -DCORE_DEBUG_LEVEL=4
                              -DCONFIG_SW_COEXIST_ENABLE=1
                          ;   -DBOARD_HAS_PSRAM
                          ;   -mfix-esp32-psram-cache-issue
diff --git a/platformio_usersettings.ini.sample b/platformio_usersettings.ini.sample
index 886e9dc..50131c6 100644
--- a/platformio_usersettings.ini.sample
+++ b/platformio_usersettings.ini.sample
@@ -12,8 +12,8 @@ build_flags = -DWIFISID='"mywifi"'
 ;            -DUSE_ETHERNET                             ## use ethernet instead of Wifi
 ;            -DLR_BLEADDRESS='"c4:b9:71:da:19:c7"'      ## if you add the device address here we can skip scanning at startup
             -DROTARY=1                                  ## use a rotary attached to esp32
-            -DROTARY_PIN_A=GPIO_NUM_27                  ## pin a (CLK) of the rotary (Fire Beetle D3) - Set to GPIO_NUM_0 if no rotary is connected
-            -DROTARY_PIN_B=GPIO_NUM_26                  ## pin b (DT) of the rotary (Fire Beetle D4) -  Set to GPIO_NUM_0 if no rotary is connected
+            -DROTARY_PIN_A=GPIO_NUM_27                  ## pin a (CLK) of the rotary (Fire Beetle D4) - Set to GPIO_NUM_0 if no rotary is connected
+            -DROTARY_PIN_B=GPIO_NUM_26                  ## pin b (DT) of the rotary (Fire Beetle D3) -  Set to GPIO_NUM_0 if no rotary is connected
             -DROTARY_PIN_BUTTON=GPIO_NUM_25             ## input pin of the rotary switch (SW) (Fire Beetle D2) - Set to GPIO_NUM_0 if no rotary is connected
              ### LONG PRESS Behavior: LONG PRESS on the rotary button is used to switch to the next scene. LONG_PRESS_DELAY defines how long the button must be pressed for the first event.
              ###                      LONG_PRESS_INTERVAL defines how long it takes to switch to the next scene
diff --git a/src/LukeRobertsBle.cpp b/src/LukeRobertsBle.cpp
index 71551a6..c4551fe 100644
--- a/src/LukeRobertsBle.cpp
+++ b/src/LukeRobertsBle.cpp
@@ -149,7 +149,7 @@ bool BleGattClient::send_queued() {
           command.on_send(0);
         }
         needs_result = true;
-        yield();
+        delay(50);
       }
     }
     // Other pending commands
@@ -157,7 +157,7 @@ bool BleGattClient::send_queued() {
       auto cmd = pending_commands.front();
       send(cmd.data, cmd.size);
       needs_result = true;
-      yield();
+      delay(100);
       pending_commands.pop();
       if (cmd.on_send) {
         cmd.on_send(0);
@@ -231,8 +231,7 @@ BleGattClient::on_complete_callback BleGattClient::on_connect_ = nullptr;
 BleGattClient::on_complete_callback BleGattClient::on_disconnect_ = nullptr;
 notify_callback BleGattClient::on_notify_ = nullptr;
 BleGattClient::on_downlight_callback BleGattClient::on_downlight_notification_ =
-    nullptr; // [](uint8_t,uint16_t){  log_i("=============== DEFAULT ON DOWN
-             // ===============");} ;
+    nullptr;
 
 // BleGattClient::ClientCallbacks BleGattClient::client_cb_;
 
@@ -244,7 +243,7 @@ std::vector<int> SceneMapper::brightness_map_ = {
 
 std::vector<int> SceneMapper::colortemperature_map_ = {
     0, 2700, 4000, 3800, 2800, 4000, 2700, 4000}; // Load the default values
-#endif 
+#endif
 
 std::map<uint8_t, std::string> scenes = {{0, "OFF"}};
 
diff --git a/src/LukeRobertsBle.h b/src/LukeRobertsBle.h
index 8a1ac40..9cbcb5c 100644
--- a/src/LukeRobertsBle.h
+++ b/src/LukeRobertsBle.h
@@ -64,7 +64,7 @@ class BleGattClient {
       client = nullptr;
       return false;
     }
-    yield();
+    delay(10);
   }
 
   struct BleCommand {
@@ -226,9 +226,9 @@ class BleGattClient {
         pRemoteCharacteristic->getUUID().toString().c_str(), length, length,
         (char *)pData, (int)pData[0]);
 
-    log_d("Client data received len: %d\n", length);
+    log_v("Client data received len: %d\n", length);
     for (auto i = 0; i < length; i++) {
-      log_d("Response byte[%d]: %d (0x%X)", i, pData[i], pData[i]);
+      log_v("Response byte[%d]: %d (0x%X)", i, pData[i], pData[i]);
     }
 
     if (on_downlight_notification_ != nullptr &&
diff --git a/src/main.cpp b/src/main.cpp
index cd09169..c6b4b38 100644
--- a/src/main.cpp
+++ b/src/main.cpp
@@ -98,7 +98,7 @@ class LR_Ble_Device {
            4,
            false,
            [&](int) {
-             if (state().power) {
+             /*if (true || state().power)*/ {
                char json[32];
                snprintf(json, sizeof(json), "%d", state_.scene);
                mqtt.queue("stat/" HOSTNAME "/SCENE", json);
@@ -114,7 +114,6 @@ class LR_Ble_Device {
   // Not sure why this doesn't work from constustructor
   void init() {
     gatt_client_.set_on_downlight([&](uint8_t brightness, uint16_t kelvin) {
-
       state_.brightness = brightness;
       state_.kelvin = kelvin;
       state_.mired = switch_kelvin_mired(state_.kelvin);
@@ -254,7 +253,7 @@ class LR_Ble_Device {
     gatt_client_.cached_commands[kScene].is_dirty |=
         force_dirty || (state_.scene == 0 || state_.scene != new_scene);
     state_.scene = new_scene;
-#ifdef OLLD
+#ifdef OLD
     //    if (state_.brightness == 0) {
     state_.brightness = SceneMapper::map_brightness(state_.scene);
     //    }