Adding Temper to Miyoku ZMK

[calerouxz]

I would like to use the Temper with Miryoku, it is not currently supported. It also does not seem to work properly using the Corne configuration as you seemingly could for the Chocofi. I tested this and it would appear as the columns were shifted 1 column to the right and the pinky column not working, after flashing the example firmware from temper zmk config, all keys work correctly.

Can anyone provide instructions to, or help add this keyboard?

[manna-harbour]

There are no instructions yet, but there are plenty of examples in the commit history.

This one manna-harbour/miryoku_zmk@d43e5dd is very similar, as they use the same mapping, same MCU, and are both split shields. Just copy the otg and otg.keymap files and change otg to temper in filenames and contents, and replace this line https://github.com/manna-harbour/miryoku_zmk/blob/d43e5ddfdcb73e346c8a39173bf63ebbb969a867/.github/workflows/outboards/shields/otg#L4 in the copy with

outboard_repository=raeedcho/temper-zmk-config

Otherwise, I'm happy to add support.

[calerouxz]

I actually got it to work on my fork, but I've never done a PR before in order to add it to the Miryoku repo. Should I try to add it?

[manna-harbour]

Great! Yes, please open a PR. For the PR you'll also need to insert a line here https://github.com/manna-harbour/miryoku_zmk/blob/67a92372ecb8132925e25a8f84d312c2dd048152/.github/workflows/test-all-promicro-shields.yml#L84.

[manna-harbour]

Also, for new and modified files, please update the year.

[calerouxz]

I've opened the PR, thanks for the help!