frequencies.h

/* Copyright 2023 Dual Tachyon
 * https://github.com/DualTachyon
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 *     Unless required by applicable law or agreed to in writing, software
 *     distributed under the License is distributed on an "AS IS" BASIS,
 *     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *     See the License for the specific language governing permissions and
 *     limitations under the License.
 */

#ifndef FREQUENCIES_H
#define FREQUENCIES_H

#include <stdint.h>

#define _1GHz_in_KHz 100000000

typedef struct {
    const uint32_t lower;
    const uint32_t upper;
} freq_band_table_t;

extern const freq_band_table_t BX4819_band1;
extern const freq_band_table_t BX4819_band2;

typedef enum  {
    BAND_NONE = -1,
    BAND1_50MHz = 0,
    BAND2_108MHz,
    BAND3_137MHz,
    BAND4_174MHz,
    BAND5_350MHz,
    BAND6_400MHz,
    BAND7_470MHz,
    BAND_N_ELEM
} FREQUENCY_Band_t;

extern const freq_band_table_t frequencyBandTable[];
typedef enum {
// standard steps
    STEP_2_5kHz,
    STEP_5kHz,
    STEP_6_25kHz,
    STEP_10kHz,
    STEP_12_5kHz,
    STEP_25kHz,
    STEP_8_33kHz,
// custom steps
    STEP_0_01kHz,
    STEP_0_05kHz,
    STEP_0_1kHz,
    STEP_0_25kHz,
    STEP_0_5kHz,
    STEP_1kHz,
    STEP_1_25kHz,
    STEP_9kHz,
    STEP_15kHz,
    STEP_20kHz,
    STEP_30kHz,
    STEP_50kHz,
    STEP_100kHz,
    STEP_125kHz,
    STEP_200kHz,
    STEP_250kHz,
    STEP_500kHz,
    STEP_N_ELEM
} STEP_Setting_t;


extern const uint16_t gStepFrequencyTable[];
#ifdef ENABLE_NOAA
extern const uint32_t NoaaFrequencyTable[10];
#endif

FREQUENCY_Band_t FREQUENCY_GetBand(uint32_t Frequency);
uint8_t          FREQUENCY_CalculateOutputPower(uint8_t TxpLow, uint8_t TxpMid, uint8_t TxpHigh, int32_t LowerLimit, int32_t Middle, int32_t UpperLimit, int32_t Frequency);
uint32_t 		 FREQUENCY_RoundToStep(uint32_t freq, uint16_t step);

STEP_Setting_t   FREQUENCY_GetStepIdxFromSortedIdx(uint8_t sortedIdx);
uint32_t		 FREQUENCY_GetSortedIdxFromStepIdx(uint8_t step);

int32_t          TX_freq_check( uint32_t Frequency);
int32_t          RX_freq_check( uint32_t Frequency);

#endif